diff options
Diffstat (limited to 'drivers/usb')
27 files changed, 241 insertions, 49 deletions
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 81aac7f4ca59..4f5bb5698f5d 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -61,7 +61,7 @@ config USB_ARCH_HAS_EHCI default y if ARCH_W90X900 default y if ARCH_AT91SAM9G45 default y if ARCH_MXC - default y if ARCH_OMAP34XX + default y if ARCH_OMAP3 default PCI # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface. diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 6e8bcdfd23b4..a678186f218f 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1312,9 +1312,9 @@ static int processcompl(struct async *as, void __user * __user *arg) void __user *addr = as->userurb; unsigned int i; - if (as->userbuffer) + if (as->userbuffer && urb->actual_length) if (copy_to_user(as->userbuffer, urb->transfer_buffer, - urb->transfer_buffer_length)) + urb->actual_length)) goto err_out; if (put_user(as->status, &userurb->status)) goto err_out; @@ -1334,14 +1334,11 @@ static int processcompl(struct async *as, void __user * __user *arg) } } - free_async(as); - if (put_user(addr, (void __user * __user *)arg)) return -EFAULT; return 0; err_out: - free_async(as); return -EFAULT; } @@ -1371,8 +1368,11 @@ static struct async *reap_as(struct dev_state *ps) static int proc_reapurb(struct dev_state *ps, void __user *arg) { struct async *as = reap_as(ps); - if (as) - return processcompl(as, (void __user * __user *)arg); + if (as) { + int retval = processcompl(as, (void __user * __user *)arg); + free_async(as); + return retval; + } if (signal_pending(current)) return -EINTR; return -EIO; @@ -1380,11 +1380,16 @@ static int proc_reapurb(struct dev_state *ps, void __user *arg) static int proc_reapurbnonblock(struct dev_state *ps, void __user *arg) { + int retval; struct async *as; - if (!(as = async_getcompleted(ps))) - return -EAGAIN; - return processcompl(as, (void __user * __user *)arg); + as = async_getcompleted(ps); + retval = -EAGAIN; + if (as) { + retval = processcompl(as, (void __user * __user *)arg); + free_async(as); + } + return retval; } #ifdef CONFIG_COMPAT @@ -1475,9 +1480,9 @@ static int processcompl_compat(struct async *as, void __user * __user *arg) void __user *addr = as->userurb; unsigned int i; - if (as->userbuffer) + if (as->userbuffer && urb->actual_length) if (copy_to_user(as->userbuffer, urb->transfer_buffer, - urb->transfer_buffer_length)) + urb->actual_length)) return -EFAULT; if (put_user(as->status, &userurb->status)) return -EFAULT; @@ -1497,7 +1502,6 @@ static int processcompl_compat(struct async *as, void __user * __user *arg) } } - free_async(as); if (put_user(ptr_to_compat(addr), (u32 __user *)arg)) return -EFAULT; return 0; @@ -1506,8 +1510,11 @@ static int processcompl_compat(struct async *as, void __user * __user *arg) static int proc_reapurb_compat(struct dev_state *ps, void __user *arg) { struct async *as = reap_as(ps); - if (as) - return processcompl_compat(as, (void __user * __user *)arg); + if (as) { + int retval = processcompl_compat(as, (void __user * __user *)arg); + free_async(as); + return retval; + } if (signal_pending(current)) return -EINTR; return -EIO; @@ -1515,11 +1522,16 @@ static int proc_reapurb_compat(struct dev_state *ps, void __user *arg) static int proc_reapurbnonblock_compat(struct dev_state *ps, void __user *arg) { + int retval; struct async *as; - if (!(as = async_getcompleted(ps))) - return -EAGAIN; - return processcompl_compat(as, (void __user * __user *)arg); + retval = -EAGAIN; + as = async_getcompleted(ps); + if (as) { + retval = processcompl_compat(as, (void __user * __user *)arg); + free_async(as); + } + return retval; } diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 60a45f1e3a67..f2f055eb6831 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1022,6 +1022,14 @@ static int usb_resume_device(struct usb_device *udev, pm_message_t msg) goto done; } + /* Non-root devices on a full/low-speed bus must wait for their + * companion high-speed root hub, in case a handoff is needed. + */ + if (!(msg.event & PM_EVENT_AUTO) && udev->parent && + udev->bus->hs_companion) + device_pm_wait_for_dev(&udev->dev, + &udev->bus->hs_companion->root_hub->dev); + if (udev->quirks & USB_QUIRK_RESET_RESUME) udev->reset_resume = 1; diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c index fdfaa7885515..d26b9ea981f9 100644 --- a/drivers/usb/core/endpoint.c +++ b/drivers/usb/core/endpoint.c @@ -186,6 +186,7 @@ int usb_create_ep_devs(struct device *parent, ep_dev->dev.parent = parent; ep_dev->dev.release = ep_device_release; dev_set_name(&ep_dev->dev, "ep_%02x", endpoint->desc.bEndpointAddress); + device_enable_async_suspend(&ep_dev->dev); retval = device_register(&ep_dev->dev); if (retval) diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 2dcf906df569..15286533c15a 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -19,6 +19,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> +#include <linux/pm_runtime.h> #include <linux/usb.h> #include <asm/io.h> @@ -37,6 +38,122 @@ /* PCI-based HCs are common, but plenty of non-PCI HCs are used too */ +#ifdef CONFIG_PM_SLEEP + +/* Coordinate handoffs between EHCI and companion controllers + * during system resume + */ + +static DEFINE_MUTEX(companions_mutex); + +#define CL_UHCI PCI_CLASS_SERIAL_USB_UHCI +#define CL_OHCI PCI_CLASS_SERIAL_USB_OHCI +#define CL_EHCI PCI_CLASS_SERIAL_USB_EHCI + +enum companion_action { + SET_HS_COMPANION, CLEAR_HS_COMPANION, WAIT_FOR_COMPANIONS +}; + +static void companion_common(struct pci_dev *pdev, struct usb_hcd *hcd, + enum companion_action action) +{ + struct pci_dev *companion; + struct usb_hcd *companion_hcd; + unsigned int slot = PCI_SLOT(pdev->devfn); + + /* Iterate through other PCI functions in the same slot. + * If pdev is OHCI or UHCI then we are looking for EHCI, and + * vice versa. + */ + companion = NULL; + for (;;) { + companion = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, companion); + if (!companion) + break; + if (companion->bus != pdev->bus || + PCI_SLOT(companion->devfn) != slot) + continue; + + companion_hcd = pci_get_drvdata(companion); + if (!companion_hcd) + continue; + + /* For SET_HS_COMPANION, store a pointer to the EHCI bus in + * the OHCI/UHCI companion bus structure. + * For CLEAR_HS_COMPANION, clear the pointer to the EHCI bus + * in the OHCI/UHCI companion bus structure. + * For WAIT_FOR_COMPANIONS, wait until the OHCI/UHCI + * companion controllers have fully resumed. + */ + + if ((pdev->class == CL_OHCI || pdev->class == CL_UHCI) && + companion->class == CL_EHCI) { + /* action must be SET_HS_COMPANION */ + dev_dbg(&companion->dev, "HS companion for %s\n", + dev_name(&pdev->dev)); + hcd->self.hs_companion = &companion_hcd->self; + + } else if (pdev->class == CL_EHCI && + (companion->class == CL_OHCI || + companion->class == CL_UHCI)) { + switch (action) { + case SET_HS_COMPANION: + dev_dbg(&pdev->dev, "HS companion for %s\n", + dev_name(&companion->dev)); + companion_hcd->self.hs_companion = &hcd->self; + break; + case CLEAR_HS_COMPANION: + companion_hcd->self.hs_companion = NULL; + break; + case WAIT_FOR_COMPANIONS: + device_pm_wait_for_dev(&pdev->dev, + &companion->dev); + break; + } + } + } +} + +static void set_hs_companion(struct pci_dev *pdev, struct usb_hcd *hcd) +{ + mutex_lock(&companions_mutex); + dev_set_drvdata(&pdev->dev, hcd); + companion_common(pdev, hcd, SET_HS_COMPANION); + mutex_unlock(&companions_mutex); +} + +static void clear_hs_companion(struct pci_dev *pdev, struct usb_hcd *hcd) +{ + mutex_lock(&companions_mutex); + dev_set_drvdata(&pdev->dev, NULL); + + /* If pdev is OHCI or UHCI, just clear its hs_companion pointer */ + if (pdev->class == CL_OHCI || pdev->class == CL_UHCI) + hcd->self.hs_companion = NULL; + + /* Otherwise search for companion buses and clear their pointers */ + else + companion_common(pdev, hcd, CLEAR_HS_COMPANION); + mutex_unlock(&companions_mutex); +} + +static void wait_for_companions(struct pci_dev *pdev, struct usb_hcd *hcd) +{ + /* Only EHCI controllers need to wait. + * No locking is needed because a controller cannot be resumed + * while one of its companions is getting unbound. + */ + if (pdev->class == CL_EHCI) + companion_common(pdev, hcd, WAIT_FOR_COMPANIONS); +} + +#else /* !CONFIG_PM_SLEEP */ + +static inline void set_hs_companion(struct pci_dev *d, struct usb_hcd *h) {} +static inline void clear_hs_companion(struct pci_dev *d, struct usb_hcd *h) {} +static inline void wait_for_companions(struct pci_dev *d, struct usb_hcd *h) {} + +#endif /* !CONFIG_PM_SLEEP */ /*-------------------------------------------------------------------------*/ @@ -123,7 +240,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) if (region == PCI_ROM_RESOURCE) { dev_dbg(&dev->dev, "no i/o regions available\n"); retval = -EBUSY; - goto err1; + goto err2; } } @@ -132,6 +249,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) retval = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED); if (retval != 0) goto err4; + set_hs_companion(dev, hcd); return retval; err4: @@ -142,6 +260,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) } else release_region(hcd->rsrc_start, hcd->rsrc_len); err2: + clear_hs_companion(dev, hcd); usb_put_hcd(hcd); err1: pci_disable_device(dev); @@ -180,6 +299,7 @@ void usb_hcd_pci_remove(struct pci_dev *dev) } else { release_region(hcd->rsrc_start, hcd->rsrc_len); } + clear_hs_companion(dev, hcd); usb_put_hcd(hcd); pci_disable_device(dev); } @@ -344,6 +464,11 @@ static int resume_common(struct device *dev, bool hibernated) clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags); if (hcd->driver->pci_resume) { + /* This call should be made only during system resume, + * not during runtime resume. + */ + wait_for_companions(pci_dev, hcd); + retval = hcd->driver->pci_resume(hcd, hibernated); if (retval) { dev_err(dev, "PCI post-resume error %d!\n", retval); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 35cc8b9ba1f5..20ecb4cec8de 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1817,6 +1817,7 @@ int usb_new_device(struct usb_device *udev) /* Tell the world! */ announce_device(udev); + device_enable_async_suspend(&udev->dev); /* Register the device. The device driver is responsible * for configuring the device and invoking the add-device * notifier chain (used by usbfs and possibly others). diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 9bc95fec793f..df73574a9cc9 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1867,6 +1867,7 @@ free_interfaces: "adding %s (config #%d, interface %d)\n", dev_name(&intf->dev), configuration, intf->cur_altsetting->desc.bInterfaceNumber); + device_enable_async_suspend(&intf->dev); ret = device_add(&intf->dev); if (ret != 0) { dev_err(&dev->dev, "device_add(%s) --> %d\n", diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c index df77f6131c73..f1e3aad76c37 100644 --- a/drivers/usb/gadget/f_audio.c +++ b/drivers/usb/gadget/f_audio.c @@ -60,7 +60,7 @@ DECLARE_UAC_AC_HEADER_DESCRIPTOR(2); #define UAC_DT_TOTAL_LENGTH (UAC_DT_AC_HEADER_LENGTH + UAC_DT_INPUT_TERMINAL_SIZE \ + UAC_DT_OUTPUT_TERMINAL_SIZE + UAC_DT_FEATURE_UNIT_SIZE(0)) /* B.3.2 Class-Specific AC Interface Descriptor */ -static struct uac_ac_header_descriptor_2 ac_header_desc = { +static struct uac_ac_header_descriptor_v1_2 ac_header_desc = { .bLength = UAC_DT_AC_HEADER_LENGTH, .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubtype = UAC_HEADER, @@ -124,7 +124,7 @@ static struct usb_audio_control_selector feature_unit = { }; #define OUTPUT_TERMINAL_ID 3 -static struct uac_output_terminal_descriptor output_terminal_desc = { +static struct uac_output_terminal_descriptor_v1 output_terminal_desc = { .bLength = UAC_DT_OUTPUT_TERMINAL_SIZE, .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubtype = UAC_OUTPUT_TERMINAL, @@ -154,7 +154,7 @@ static struct usb_interface_descriptor as_interface_alt_1_desc = { }; /* B.4.2 Class-Specific AS Interface Descriptor */ -static struct uac_as_header_descriptor as_header_desc = { +static struct uac_as_header_descriptor_v1 as_header_desc = { .bLength = UAC_DT_AS_HEADER_SIZE, .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubtype = UAC_AS_GENERAL, diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c index 0a577d5694fd..d4f0db58a8ad 100644 --- a/drivers/usb/gadget/f_eem.c +++ b/drivers/usb/gadget/f_eem.c @@ -358,7 +358,7 @@ done: * b15: bmType (0 == data) */ len = skb->len; - put_unaligned_le16((len & 0x3FFF) | BIT(14), skb_push(skb, 2)); + put_unaligned_le16(len & 0x3FFF, skb_push(skb, 2)); /* add a zero-length EEM packet, if needed */ if (padlen) @@ -464,7 +464,6 @@ static int eem_unwrap(struct gether *port, } /* validate CRC */ - crc = get_unaligned_le32(skb->data + len - ETH_FCS_LEN); if (header & BIT(14)) { crc = get_unaligned_le32(skb->data + len - ETH_FCS_LEN); diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c index d0b1e836f0e0..5f6a2e0a9357 100644 --- a/drivers/usb/gadget/gmidi.c +++ b/drivers/usb/gadget/gmidi.c @@ -237,7 +237,7 @@ static const struct usb_interface_descriptor ac_interface_desc = { }; /* B.3.2 Class-Specific AC Interface Descriptor */ -static const struct uac_ac_header_descriptor_1 ac_header_desc = { +static const struct uac_ac_header_descriptor_v1_1 ac_header_desc = { .bLength = UAC_DT_AC_HEADER_SIZE(1), .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubtype = USB_MS_HEADER, diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c index 429560100b10..76496f5d272c 100644 --- a/drivers/usb/gadget/multi.c +++ b/drivers/usb/gadget/multi.c @@ -29,7 +29,7 @@ #if defined USB_ETH_RNDIS # undef USB_ETH_RNDIS #endif -#ifdef CONFIG_USB_ETH_RNDIS +#ifdef CONFIG_USB_G_MULTI_RNDIS # define USB_ETH_RNDIS y #endif diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c index e220fb8091a3..8b45145b9136 100644 --- a/drivers/usb/gadget/r8a66597-udc.c +++ b/drivers/usb/gadget/r8a66597-udc.c @@ -26,6 +26,7 @@ #include <linux/io.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/err.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 4b5dbd0127f5..5fc80a104150 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -2582,6 +2582,7 @@ err: hsotg->gadget.dev.driver = NULL; return ret; } +EXPORT_SYMBOL(usb_gadget_register_driver); int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) { diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 1ec3857f22e6..d8d6d3461d32 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1118,7 +1118,7 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_hcd_au1xxx_driver #endif -#ifdef CONFIG_ARCH_OMAP34XX +#ifdef CONFIG_ARCH_OMAP3 #include "ehci-omap.c" #define PLATFORM_DRIVER ehci_hcd_omap_driver #endif diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index c75d9270c752..19372673bf09 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -196,7 +196,9 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) if (hostpc_reg) { u32 t3; + spin_unlock_irq(&ehci->lock); msleep(5);/* 5ms for HCD enter low pwr mode */ + spin_lock_irq(&ehci->lock); t3 = ehci_readl(ehci, hostpc_reg); ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg); t3 = ehci_readl(ehci, hostpc_reg); @@ -904,17 +906,18 @@ static int ehci_hub_control ( if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) goto error; - ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); + /* After above check the port must be connected. * Set appropriate bit thus could put phy into low power * mode if we have hostpc feature */ + temp &= ~PORT_WKCONN_E; + temp |= PORT_WKDISC_E | PORT_WKOC_E; + ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); if (hostpc_reg) { - temp &= ~PORT_WKCONN_E; - temp |= (PORT_WKDISC_E | PORT_WKOC_E); - ehci_writel(ehci, temp | PORT_SUSPEND, - status_reg); + spin_unlock_irqrestore(&ehci->lock, flags); msleep(5);/* 5ms for HCD enter low pwr mode */ + spin_lock_irqsave(&ehci->lock, flags); temp1 = ehci_readl(ehci, hostpc_reg); ehci_writel(ehci, temp1 | HOSTPC_PHCD, hostpc_reg); diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c index d224ab467a40..e1232890c78b 100644 --- a/drivers/usb/host/fhci-tds.c +++ b/drivers/usb/host/fhci-tds.c @@ -105,7 +105,7 @@ void fhci_ep0_free(struct fhci_usb *usb) if (ep->td_base) cpm_muram_free(cpm_muram_offset(ep->td_base)); - if (ep->conf_frame_Q) { + if (kfifo_initialized(&ep->conf_frame_Q)) { size = cq_howmany(&ep->conf_frame_Q); for (; size; size--) { struct packet *pkt = cq_get(&ep->conf_frame_Q); @@ -115,7 +115,7 @@ void fhci_ep0_free(struct fhci_usb *usb) cq_delete(&ep->conf_frame_Q); } - if (ep->empty_frame_Q) { + if (kfifo_initialized(&ep->empty_frame_Q)) { size = cq_howmany(&ep->empty_frame_Q); for (; size; size--) { struct packet *pkt = cq_get(&ep->empty_frame_Q); @@ -125,7 +125,7 @@ void fhci_ep0_free(struct fhci_usb *usb) cq_delete(&ep->empty_frame_Q); } - if (ep->dummy_packets_Q) { + if (kfifo_initialized(&ep->dummy_packets_Q)) { size = cq_howmany(&ep->dummy_packets_Q); for (; size; size--) { u8 *buff = cq_get(&ep->dummy_packets_Q); diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 0025847743f3..8b37a4b9839e 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -3245,6 +3245,7 @@ static struct usb_device_id sisusb_table [] = { { USB_DEVICE(0x0711, 0x0902) }, { USB_DEVICE(0x0711, 0x0903) }, { USB_DEVICE(0x0711, 0x0918) }, + { USB_DEVICE(0x0711, 0x0920) }, { USB_DEVICE(0x182d, 0x021c) }, { USB_DEVICE(0x182d, 0x0269) }, { } diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index d9db86498022..b4c783c284ba 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -37,7 +37,7 @@ config USB_MUSB_SOC depends on USB_MUSB_HDRC default y if ARCH_DAVINCI default y if ARCH_OMAP2430 - default y if ARCH_OMAP34XX + default y if ARCH_OMAP3 default y if (BF54x && !BF544) default y if (BF52x && !BF522 && !BF523) @@ -48,7 +48,7 @@ comment "OMAP 243x high speed USB support" depends on USB_MUSB_HDRC && ARCH_OMAP2430 comment "OMAP 343x high speed USB support" - depends on USB_MUSB_HDRC && ARCH_OMAP34XX + depends on USB_MUSB_HDRC && ARCH_OMAP3 comment "Blackfin high speed USB Support" depends on USB_MUSB_HDRC && ((BF54x && !BF544) || (BF52x && !BF522 && !BF523)) @@ -153,7 +153,7 @@ config MUSB_PIO_ONLY config USB_INVENTRA_DMA bool depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY - default ARCH_OMAP2430 || ARCH_OMAP34XX || BLACKFIN + default ARCH_OMAP2430 || ARCH_OMAP3 || BLACKFIN help Enable DMA transfers using Mentor's engine. diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 5eb9318cff77..738efd8063b5 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1000,7 +1000,7 @@ static void musb_shutdown(struct platform_device *pdev) * more than selecting one of a bunch of predefined configurations. */ #if defined(CONFIG_USB_TUSB6010) || \ - defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX) + defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) static ushort __initdata fifo_mode = 4; #else static ushort __initdata fifo_mode = 2; diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 03d50909b078..5514c7ee85bd 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -562,7 +562,7 @@ extern void musb_hnp_stop(struct musb *musb); extern int musb_platform_set_mode(struct musb *musb, u8 musb_mode); #if defined(CONFIG_USB_TUSB6010) || defined(CONFIG_BLACKFIN) || \ - defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX) + defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) extern void musb_platform_try_idle(struct musb *musb, unsigned long timeout); #else #define musb_platform_try_idle(x, y) do {} while (0) diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index de56b3d743d7..3d2d3e549bd1 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -44,6 +44,7 @@ config ISP1301_OMAP config USB_ULPI bool "Generic ULPI Transceiver Driver" depends on ARM + select USB_OTG_UTILS help Enable this to support ULPI connected USB OTG transceivers which are likely found on embedded boards. diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 216f187582ab..7638828e7317 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -50,7 +50,7 @@ * Version Information */ #define DRIVER_VERSION "v1.5.0" -#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>" +#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr" #define DRIVER_DESC "USB FTDI Serial Converters Driver" static int debug; @@ -145,10 +145,15 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = { +/* + * Device ID not listed? Test via module params product/vendor or + * /sys/bus/usb/ftdi_sio/new_id, then send patch/report! + */ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) }, @@ -552,9 +557,16 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) }, { USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) }, /* - * Due to many user requests for multiple ELV devices we enable - * them by default. + * ELV devices: */ + { USB_DEVICE(FTDI_VID, FTDI_ELV_USR_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_MSM1_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_KL100_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_WS550_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_EC3000_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_WS888_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_TWS550_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_FEM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) }, @@ -571,11 +583,17 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_UTP8_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_WS444PC_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_HS485_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_UMS100_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_TFD128_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_FM3RX_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_WS777_PID) }, { USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) }, { USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) }, { USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) }, @@ -697,6 +715,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) }, { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) }, { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_AD4USB_PID) }, { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) }, { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) }, { USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index da92b4952ffb..c8951aeed983 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -38,6 +38,8 @@ /* www.candapter.com Ewert Energy Systems CANdapter device */ #define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */ +#define FTDI_NXTCAM_PID 0xABB8 /* NXTCam for Mindstorms NXT */ + /* OOCDlink by Joern Kaipf <joernk@web.de> * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */ #define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ @@ -161,22 +163,37 @@ /* * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). * All of these devices use FTDI's vendor ID (0x0403). + * Further IDs taken from ELV Windows .inf file. * * The previously included PID for the UO 100 module was incorrect. * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58). * * Armin Laeuger originally sent the PID for the UM 100 module. */ +#define FTDI_ELV_USR_PID 0xE000 /* ELV Universal-Sound-Recorder */ +#define FTDI_ELV_MSM1_PID 0xE001 /* ELV Mini-Sound-Modul */ +#define FTDI_ELV_KL100_PID 0xE002 /* ELV Kfz-Leistungsmesser KL 100 */ +#define FTDI_ELV_WS550_PID 0xE004 /* WS 550 */ +#define FTDI_ELV_EC3000_PID 0xE006 /* ENERGY CONTROL 3000 USB */ +#define FTDI_ELV_WS888_PID 0xE008 /* WS 888 */ +#define FTDI_ELV_TWS550_PID 0xE009 /* Technoline WS 550 */ +#define FTDI_ELV_FEM_PID 0xE00A /* Funk Energie Monitor */ #define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */ #define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */ #define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */ +#define FTDI_ELV_UMS100_PID 0xE0EB /* ELV USB Master-Slave Schaltsteckdose UMS 100 */ +#define FTDI_ELV_TFD128_PID 0xE0EC /* ELV Temperatur-Feuchte-Datenlogger TFD 128 */ +#define FTDI_ELV_FM3RX_PID 0xE0ED /* ELV Messwertuebertragung FM3 RX */ +#define FTDI_ELV_WS777_PID 0xE0EE /* Conrad WS 777 */ #define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */ #define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ #define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ #define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ #define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */ #define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */ +#define FTDI_ELV_UTP8_PID 0xE0F5 /* ELV UTP 8 */ #define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */ +#define FTDI_ELV_WS444PC_PID 0xE0F7 /* Conrad WS 444 PC */ #define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */ #define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */ #define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */ @@ -968,6 +985,7 @@ #define PAPOUCH_VID 0x5050 /* Vendor ID */ #define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ #define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */ +#define PAPOUCH_AD4USB_PID 0x8003 /* AD4USB Measurement Module */ /* * Marvell SheevaPlug diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index ac1b6449fb6a..3eb6143bb646 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -298,6 +298,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist }, + { USB_DEVICE(0x413C, 0x08133) }, /* Dell Computer Corp. Wireless 5720 VZW Mobile Broadband (EVDO Rev-A) Minicard GPS Port */ { } }; diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index e5e6df39e737..aadc16b5eed7 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -134,14 +134,14 @@ static int slave_configure(struct scsi_device *sdev) if (us->fflags & US_FL_MAX_SECTORS_MIN) max_sectors = PAGE_CACHE_SIZE >> 9; if (queue_max_sectors(sdev->request_queue) > max_sectors) - blk_queue_max_sectors(sdev->request_queue, + blk_queue_max_hw_sectors(sdev->request_queue, max_sectors); } else if (sdev->type == TYPE_TAPE) { /* Tapes need much higher max_sector limits, so just * raise it to the maximum possible (4 GB / 512) and * let the queue segment size sort out the real limit. */ - blk_queue_max_sectors(sdev->request_queue, 0x7FFFFF); + blk_queue_max_hw_sectors(sdev->request_queue, 0x7FFFFF); } /* Some USB host controllers can't do DMA; they have to use PIO. @@ -495,7 +495,7 @@ static ssize_t store_max_sectors(struct device *dev, struct device_attribute *at unsigned short ms; if (sscanf(buf, "%hu", &ms) > 0 && ms <= SCSI_DEFAULT_MAX_SECTORS) { - blk_queue_max_sectors(sdev->request_queue, ms); + blk_queue_max_hw_sectors(sdev->request_queue, ms); return strlen(buf); } return -EINVAL; diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index c932f9053188..49575fba3756 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -941,7 +941,7 @@ UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0000, 0x9999, UNUSUAL_DEV( 0x07af, 0x0004, 0x0100, 0x0133, "Microtech", "USB-SCSI-DB25", - US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, + US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init, US_FL_SCM_MULT_TARG ), UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100, diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index e9f995486ec1..bbeeb92a2131 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -78,7 +78,7 @@ MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>"); MODULE_DESCRIPTION("USB Mass Storage driver for Linux"); MODULE_LICENSE("GPL"); -static unsigned int delay_use = 5; +static unsigned int delay_use = 1; module_param(delay_use, uint, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(delay_use, "seconds to delay before using a new device"); |