diff options
Diffstat (limited to 'drivers/video')
-rw-r--r-- | drivers/video/Kconfig | 7 | ||||
-rw-r--r-- | drivers/video/asiliantfb.c | 21 | ||||
-rw-r--r-- | drivers/video/aty/radeon_pm.c | 19 | ||||
-rw-r--r-- | drivers/video/au1100fb.c | 3 | ||||
-rw-r--r-- | drivers/video/console/vgacon.c | 67 | ||||
-rw-r--r-- | drivers/video/fbmem.c | 2 | ||||
-rw-r--r-- | drivers/video/gbefb.c | 5 | ||||
-rw-r--r-- | drivers/video/neofb.c | 17 | ||||
-rw-r--r-- | drivers/video/nvidia/nvidia.c | 2 | ||||
-rw-r--r-- | drivers/video/s3c2410fb.c | 1 |
10 files changed, 86 insertions, 58 deletions
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 3e153d313bb0..f5079c78ba4e 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -520,16 +520,11 @@ config FB_GBE config FB_GBE_MEM int "Video memory size in MB" depends on FB_GBE - default 8 + default 4 help This is the amount of memory reserved for the framebuffer, which can be any value between 1MB and 8MB. -config BUS_I2C - bool - depends on (FB = y) && VISWS - default y - config FB_SUN3 bool "Sun3 framebuffer support" depends on (FB = y) && (SUN3 || SUN3X) && BROKEN diff --git a/drivers/video/asiliantfb.c b/drivers/video/asiliantfb.c index 69f75547865d..c924d81f7978 100644 --- a/drivers/video/asiliantfb.c +++ b/drivers/video/asiliantfb.c @@ -322,32 +322,29 @@ static int asiliantfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, writeb(green, mmio_base + 0x791); writeb(blue, mmio_base + 0x791); - switch(p->var.bits_per_pixel) { - case 15: - if (regno < 16) { + if (regno < 16) { + switch(p->var.red.offset) { + case 10: /* RGB 555 */ ((u32 *)(p->pseudo_palette))[regno] = ((red & 0xf8) << 7) | ((green & 0xf8) << 2) | ((blue & 0xf8) >> 3); - } - break; - case 16: - if (regno < 16) { + break; + case 11: /* RGB 565 */ ((u32 *)(p->pseudo_palette))[regno] = ((red & 0xf8) << 8) | ((green & 0xfc) << 3) | ((blue & 0xf8) >> 3); - } - break; - case 24: - if (regno < 24) { + break; + case 16: /* RGB 888 */ ((u32 *)(p->pseudo_palette))[regno] = (red << 16) | (green << 8) | (blue); + break; } - break; } + return 0; } diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c index 556895e99645..1f8d805c61e5 100644 --- a/drivers/video/aty/radeon_pm.c +++ b/drivers/video/aty/radeon_pm.c @@ -1321,8 +1321,6 @@ static void radeon_pm_full_reset_sdram(struct radeonfb_info *rinfo) mdelay( 15); } -#ifdef CONFIG_PPC_OF - static void radeon_pm_reset_pad_ctlr_strength(struct radeonfb_info *rinfo) { u32 tmp, tmp2; @@ -1836,6 +1834,8 @@ static void radeon_reinitialize_M10(struct radeonfb_info *rinfo) radeon_pm_m10_enable_lvds_spread_spectrum(rinfo); } +#ifdef CONFIG_PPC_OF + static void radeon_pm_m9p_reconfigure_mc(struct radeonfb_info *rinfo) { OUTREG(MC_CNTL, rinfo->save_regs[46]); @@ -2728,13 +2728,23 @@ void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk) printk("radeonfb: Dynamic Clock Power Management disabled\n"); } +#if defined(CONFIG_PM) /* Check if we can power manage on suspend/resume. We can do * D2 on M6, M7 and M9, and we can resume from D3 cold a few other * "Mac" cards, but that's all. We need more infos about what the * BIOS does tho. Right now, all this PM stuff is pmac-only for that * reason. --BenH */ -#if defined(CONFIG_PM) && defined(CONFIG_PPC_PMAC) + /* Special case for Samsung P35 laptops + */ + if ((rinfo->pdev->vendor == PCI_VENDOR_ID_ATI) && + (rinfo->pdev->device == PCI_CHIP_RV350_NP) && + (rinfo->pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG) && + (rinfo->pdev->subsystem_device == 0xc00c)) { + rinfo->reinit_func = radeon_reinitialize_M10; + rinfo->pm_mode |= radeon_pm_off; + } +#if defined(CONFIG_PPC_PMAC) if (_machine == _MACH_Pmac && rinfo->of_node) { if (rinfo->is_mobility && rinfo->pm_reg && rinfo->family <= CHIP_FAMILY_RV250) @@ -2778,7 +2788,8 @@ void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk) OUTREG(TV_DAC_CNTL, INREG(TV_DAC_CNTL) | 0x07000000); #endif } -#endif /* defined(CONFIG_PM) && defined(CONFIG_PPC_PMAC) */ +#endif /* defined(CONFIG_PPC_PMAC) */ +#endif /* defined(CONFIG_PM) */ } void radeonfb_pm_exit(struct radeonfb_info *rinfo) diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c index 2406899f1207..3d04b2def0f1 100644 --- a/drivers/video/au1100fb.c +++ b/drivers/video/au1100fb.c @@ -49,6 +49,7 @@ #include <linux/interrupt.h> #include <linux/ctype.h> #include <linux/dma-mapping.h> +#include <linux/platform_device.h> #include <asm/mach-au1x00/au1000.h> @@ -406,7 +407,7 @@ int au1100fb_fb_mmap(struct fb_info *fbi, struct vm_area_struct *vma) vma->vm_flags |= VM_IO; - if (io_remap_page_range(vma, vma->vm_start, off, + if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT, vma->vm_end - vma->vm_start, vma->vm_page_prot)) { return -EAGAIN; diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index 12d9329d1408..5a86978537d2 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -509,57 +509,60 @@ static int vgacon_doresize(struct vc_data *c, { unsigned long flags; unsigned int scanlines = height * c->vc_font.height; - u8 scanlines_lo, r7, vsync_end, mode, max_scan; + u8 scanlines_lo = 0, r7 = 0, vsync_end = 0, mode, max_scan; spin_lock_irqsave(&vga_lock, flags); - outb_p(VGA_CRTC_MAX_SCAN, vga_video_port_reg); - max_scan = inb_p(vga_video_port_val); - - if (max_scan & 0x80) - scanlines <<= 1; - vgacon_xres = width * VGA_FONTWIDTH; vgacon_yres = height * c->vc_font.height; - outb_p(VGA_CRTC_MODE, vga_video_port_reg); - mode = inb_p(vga_video_port_val); + if (vga_video_type >= VIDEO_TYPE_VGAC) { + outb_p(VGA_CRTC_MAX_SCAN, vga_video_port_reg); + max_scan = inb_p(vga_video_port_val); - if (mode & 0x04) - scanlines >>= 1; + if (max_scan & 0x80) + scanlines <<= 1; - scanlines -= 1; - scanlines_lo = scanlines & 0xff; + outb_p(VGA_CRTC_MODE, vga_video_port_reg); + mode = inb_p(vga_video_port_val); - outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg); - r7 = inb_p(vga_video_port_val) & ~0x42; + if (mode & 0x04) + scanlines >>= 1; - if (scanlines & 0x100) - r7 |= 0x02; - if (scanlines & 0x200) - r7 |= 0x40; + scanlines -= 1; + scanlines_lo = scanlines & 0xff; - /* deprotect registers */ - outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg); - vsync_end = inb_p(vga_video_port_val); - outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg); - outb_p(vsync_end & ~0x80, vga_video_port_val); + outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg); + r7 = inb_p(vga_video_port_val) & ~0x42; + + if (scanlines & 0x100) + r7 |= 0x02; + if (scanlines & 0x200) + r7 |= 0x40; + + /* deprotect registers */ + outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg); + vsync_end = inb_p(vga_video_port_val); + outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg); + outb_p(vsync_end & ~0x80, vga_video_port_val); + } outb_p(VGA_CRTC_H_DISP, vga_video_port_reg); outb_p(width - 1, vga_video_port_val); outb_p(VGA_CRTC_OFFSET, vga_video_port_reg); outb_p(width >> 1, vga_video_port_val); - outb_p(VGA_CRTC_V_DISP_END, vga_video_port_reg); - outb_p(scanlines_lo, vga_video_port_val); - outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg); - outb_p(r7,vga_video_port_val); + if (vga_video_type >= VIDEO_TYPE_VGAC) { + outb_p(VGA_CRTC_V_DISP_END, vga_video_port_reg); + outb_p(scanlines_lo, vga_video_port_val); + outb_p(VGA_CRTC_OVERFLOW, vga_video_port_reg); + outb_p(r7,vga_video_port_val); - /* reprotect registers */ - outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg); - outb_p(vsync_end, vga_video_port_val); + /* reprotect registers */ + outb_p(VGA_CRTC_V_SYNC_END, vga_video_port_reg); + outb_p(vsync_end, vga_video_port_val); + } spin_unlock_irqrestore(&vga_lock, flags); - return 0; } diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c index d2dede6ed3e5..996c7b58564e 100644 --- a/drivers/video/fbmem.c +++ b/drivers/video/fbmem.c @@ -1550,6 +1550,7 @@ int fb_get_options(char *name, char **option) return retval; } +#ifndef MODULE /** * video_setup - process command line options * @options: string of options @@ -1593,6 +1594,7 @@ static int __init video_setup(char *options) return 0; } __setup("video=", video_setup); +#endif /* * Visible symbols for modules diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c index 38d22729b129..5e25b9860196 100644 --- a/drivers/video/gbefb.c +++ b/drivers/video/gbefb.c @@ -656,12 +656,15 @@ static int gbefb_set_par(struct fb_info *info) switch (bytesPerPixel) { case 1: SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_I8); + info->fix.visual = FB_VISUAL_PSEUDOCOLOR; break; case 2: SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_ARGB5); + info->fix.visual = FB_VISUAL_TRUECOLOR; break; case 4: SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_RGB8); + info->fix.visual = FB_VISUAL_TRUECOLOR; break; } SET_GBE_FIELD(WID, BUF, val, GBE_BMODE_BOTH); @@ -1243,7 +1246,7 @@ static int __devexit gbefb_remove(struct platform_device* p_dev) (void *)gbe_tiles.cpu, gbe_tiles.dma); release_mem_region(GBE_BASE, sizeof(struct sgi_gbe)); iounmap(gbe); - gbefb_remove_sysfs(dev); + gbefb_remove_sysfs(&p_dev->dev); framebuffer_release(info); return 0; diff --git a/drivers/video/neofb.c b/drivers/video/neofb.c index 747602aa5615..a2e201dc40f7 100644 --- a/drivers/video/neofb.c +++ b/drivers/video/neofb.c @@ -843,6 +843,9 @@ static int neofb_set_par(struct fb_info *info) par->SysIfaceCntl2 = 0xc0; /* VESA Bios sets this to 0x80! */ + /* Initialize: by default, we want display config register to be read */ + par->PanelDispCntlRegRead = 1; + /* Enable any user specified display devices. */ par->PanelDispCntlReg1 = 0x00; if (par->internal_display) @@ -1334,6 +1337,18 @@ static int neofb_blank(int blank_mode, struct fb_info *info) struct neofb_par *par = info->par; int seqflags, lcdflags, dpmsflags, reg; + + /* + * Reload the value stored in the register, if sensible. It might have + * been changed via FN keystroke. + */ + if (par->PanelDispCntlRegRead) { + neoUnlock(); + par->PanelDispCntlReg1 = vga_rgfx(NULL, 0x20) & 0x03; + neoLock(&par->state); + } + par->PanelDispCntlRegRead = !blank_mode; + switch (blank_mode) { case FB_BLANK_POWERDOWN: /* powerdown - both sync lines down */ seqflags = VGA_SR01_SCREEN_OFF; /* Disable sequencer */ @@ -1366,7 +1381,7 @@ static int neofb_blank(int blank_mode, struct fb_info *info) case FB_BLANK_NORMAL: /* just blank screen (backlight stays on) */ seqflags = VGA_SR01_SCREEN_OFF; /* Disable sequencer */ lcdflags = par->PanelDispCntlReg1 & 0x02; /* LCD normal */ - dpmsflags = 0; /* no hsync/vsync suppression */ + dpmsflags = 0x00; /* no hsync/vsync suppression */ break; case FB_BLANK_UNBLANK: /* unblank */ seqflags = 0; /* Enable sequencer */ diff --git a/drivers/video/nvidia/nvidia.c b/drivers/video/nvidia/nvidia.c index dbcb8962e57d..a7c4e5e8ead6 100644 --- a/drivers/video/nvidia/nvidia.c +++ b/drivers/video/nvidia/nvidia.c @@ -138,6 +138,8 @@ static struct pci_device_id nvidiafb_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_420_8X, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_4000, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_GEFORCE4_448_GO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_GEFORCE4_488_GO, diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c index d574dd3c9c8a..9451932fbaf2 100644 --- a/drivers/video/s3c2410fb.c +++ b/drivers/video/s3c2410fb.c @@ -82,7 +82,6 @@ #include <linux/fb.h> #include <linux/init.h> #include <linux/dma-mapping.h> -#include <linux/string.h> #include <linux/interrupt.h> #include <linux/workqueue.h> #include <linux/wait.h> |