diff options
Diffstat (limited to 'drivers')
345 files changed, 27923 insertions, 2086 deletions
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index db39e9e607d8..ada4b4d9bdc8 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -46,7 +46,6 @@ #define PREFIX "ACPI: " -#define ACPI_VIDEO_CLASS "video" #define ACPI_VIDEO_BUS_NAME "Video Bus" #define ACPI_VIDEO_DEVICE_NAME "Video Device" #define ACPI_VIDEO_NOTIFY_SWITCH 0x80 @@ -1445,7 +1444,8 @@ static void acpi_video_bus_notify(struct acpi_device *device, u32 event) case ACPI_VIDEO_NOTIFY_SWITCH: /* User requested a switch, * most likely via hotkey. */ acpi_bus_generate_proc_event(device, event, 0); - keycode = KEY_SWITCHVIDEOMODE; + if (!acpi_notifier_call_chain(device, event, 0)) + keycode = KEY_SWITCHVIDEOMODE; break; case ACPI_VIDEO_NOTIFY_PROBE: /* User plugged in or removed a video @@ -1475,7 +1475,8 @@ static void acpi_video_bus_notify(struct acpi_device *device, u32 event) break; } - acpi_notifier_call_chain(device, event, 0); + if (event != ACPI_VIDEO_NOTIFY_SWITCH) + acpi_notifier_call_chain(device, event, 0); if (keycode) { input_report_key(input, keycode, 1); diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index d38c40fe4ddb..41223c7f0206 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -452,7 +452,7 @@ void ahci_save_initial_config(struct device *dev, } if (mask_port_map) { - dev_printk(KERN_ERR, dev, "masking port_map 0x%x -> 0x%x\n", + dev_printk(KERN_WARNING, dev, "masking port_map 0x%x -> 0x%x\n", port_map, port_map & mask_port_map); port_map &= mask_port_map; diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 736bee5dafeb..000d03ae6653 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4143,9 +4143,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { * Devices which choke on SETXFER. Applies only if both the * device and controller are SATA. */ - { "PIONEER DVD-RW DVRTD08", "1.00", ATA_HORKAGE_NOSETXFER }, - { "PIONEER DVD-RW DVR-212D", "1.28", ATA_HORKAGE_NOSETXFER }, - { "PIONEER DVD-RW DVR-216D", "1.08", ATA_HORKAGE_NOSETXFER }, + { "PIONEER DVD-RW DVRTD08", NULL, ATA_HORKAGE_NOSETXFER }, + { "PIONEER DVD-RW DVR-212D", NULL, ATA_HORKAGE_NOSETXFER }, + { "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER }, /* End Marker */ { } diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index d51f9795c064..927f968e99d9 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3797,6 +3797,12 @@ EXPORT_SYMBOL_GPL(ata_sas_port_alloc); */ int ata_sas_port_start(struct ata_port *ap) { + /* + * the port is marked as frozen at allocation time, but if we don't + * have new eh, we won't thaw it + */ + if (!ap->ops->error_handler) + ap->pflags &= ~ATA_PFLAG_FROZEN; return 0; } EXPORT_SYMBOL_GPL(ata_sas_port_start); diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c index 75a6a0c0094f..5d7f58a7e34d 100644 --- a/drivers/ata/pata_marvell.c +++ b/drivers/ata/pata_marvell.c @@ -161,6 +161,9 @@ static const struct pci_device_id marvell_pci_tbl[] = { { PCI_DEVICE(0x11AB, 0x6121), }, { PCI_DEVICE(0x11AB, 0x6123), }, { PCI_DEVICE(0x11AB, 0x6145), }, + { PCI_DEVICE(0x1B4B, 0x91A0), }, + { PCI_DEVICE(0x1B4B, 0x91A4), }, + { } /* terminate list */ }; diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c index 1c4b3aa4c7c4..dc88a39e7db8 100644 --- a/drivers/ata/sata_dwc_460ex.c +++ b/drivers/ata/sata_dwc_460ex.c @@ -389,7 +389,7 @@ static void sata_dwc_tf_dump(struct ata_taskfile *tf) /* * Function: get_burst_length_encode * arguments: datalength: length in bytes of data - * returns value to be programmed in register corrresponding to data length + * returns value to be programmed in register corresponding to data length * This value is effectively the log(base 2) of the length */ static int get_burst_length_encode(int datalength) diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 1c291af637b3..6040717b62bb 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -367,7 +367,7 @@ EXPORT_SYMBOL_GPL(platform_device_unregister); * * Returns &struct platform_device pointer on success, or ERR_PTR() on error. */ -struct platform_device *__init_or_module platform_device_register_resndata( +struct platform_device *platform_device_register_resndata( struct device *parent, const char *name, int id, const struct resource *res, unsigned int num, diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c index eaa8a854af03..ad367c4139b1 100644 --- a/drivers/base/power/clock_ops.c +++ b/drivers/base/power/clock_ops.c @@ -387,7 +387,7 @@ static int pm_runtime_clk_notify(struct notifier_block *nb, clknb = container_of(nb, struct pm_clk_notifier_block, nb); switch (action) { - case BUS_NOTIFY_ADD_DEVICE: + case BUS_NOTIFY_BIND_DRIVER: if (clknb->con_ids[0]) { for (con_id = clknb->con_ids; *con_id; con_id++) enable_clock(dev, *con_id); @@ -395,7 +395,7 @@ static int pm_runtime_clk_notify(struct notifier_block *nb, enable_clock(dev, NULL); } break; - case BUS_NOTIFY_DEL_DEVICE: + case BUS_NOTIFY_UNBOUND_DRIVER: if (clknb->con_ids[0]) { for (con_id = clknb->con_ids; *con_id; con_id++) disable_clock(dev, *con_id); diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index aa6320207745..06f09bf89cb2 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -57,7 +57,8 @@ static int async_error; */ void device_pm_init(struct device *dev) { - dev->power.in_suspend = false; + dev->power.is_prepared = false; + dev->power.is_suspended = false; init_completion(&dev->power.completion); complete_all(&dev->power.completion); dev->power.wakeup = NULL; @@ -91,7 +92,7 @@ void device_pm_add(struct device *dev) pr_debug("PM: Adding info for %s:%s\n", dev->bus ? dev->bus->name : "No Bus", dev_name(dev)); mutex_lock(&dpm_list_mtx); - if (dev->parent && dev->parent->power.in_suspend) + if (dev->parent && dev->parent->power.is_prepared) dev_warn(dev, "parent %s should not be sleeping\n", dev_name(dev->parent)); list_add_tail(&dev->power.entry, &dpm_list); @@ -511,7 +512,14 @@ static int device_resume(struct device *dev, pm_message_t state, bool async) dpm_wait(dev->parent, async); device_lock(dev); - dev->power.in_suspend = false; + /* + * This is a fib. But we'll allow new children to be added below + * a resumed device, even if the device hasn't been completed yet. + */ + dev->power.is_prepared = false; + + if (!dev->power.is_suspended) + goto Unlock; if (dev->pwr_domain) { pm_dev_dbg(dev, state, "power domain "); @@ -548,6 +556,9 @@ static int device_resume(struct device *dev, pm_message_t state, bool async) } End: + dev->power.is_suspended = false; + + Unlock: device_unlock(dev); complete_all(&dev->power.completion); @@ -670,7 +681,7 @@ void dpm_complete(pm_message_t state) struct device *dev = to_device(dpm_prepared_list.prev); get_device(dev); - dev->power.in_suspend = false; + dev->power.is_prepared = false; list_move(&dev->power.entry, &list); mutex_unlock(&dpm_list_mtx); @@ -835,11 +846,11 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async) device_lock(dev); if (async_error) - goto End; + goto Unlock; if (pm_wakeup_pending()) { async_error = -EBUSY; - goto End; + goto Unlock; } if (dev->pwr_domain) { @@ -877,6 +888,9 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async) } End: + dev->power.is_suspended = !error; + + Unlock: device_unlock(dev); complete_all(&dev->power.completion); @@ -1042,7 +1056,7 @@ int dpm_prepare(pm_message_t state) put_device(dev); break; } - dev->power.in_suspend = true; + dev->power.is_prepared = true; if (!list_empty(&dev->power.entry)) list_move_tail(&dev->power.entry, &dpm_prepared_list); put_device(dev); diff --git a/drivers/base/syscore.c b/drivers/base/syscore.c index c126db3cb7d1..e8d11b6630ee 100644 --- a/drivers/base/syscore.c +++ b/drivers/base/syscore.c @@ -9,6 +9,7 @@ #include <linux/syscore_ops.h> #include <linux/mutex.h> #include <linux/module.h> +#include <linux/interrupt.h> static LIST_HEAD(syscore_ops_list); static DEFINE_MUTEX(syscore_ops_lock); @@ -48,6 +49,13 @@ int syscore_suspend(void) struct syscore_ops *ops; int ret = 0; + pr_debug("Checking wakeup interrupts\n"); + + /* Return error code if there are any wakeup interrupts pending. */ + ret = check_wakeup_irqs(); + if (ret) + return ret; + WARN_ONCE(!irqs_disabled(), "Interrupts enabled before system core suspend.\n"); diff --git a/drivers/block/drbd/drbd_actlog.c b/drivers/block/drbd/drbd_actlog.c index 09ef9a878ef0..cf0e63dd97da 100644 --- a/drivers/block/drbd/drbd_actlog.c +++ b/drivers/block/drbd/drbd_actlog.c @@ -79,7 +79,7 @@ static int _drbd_md_sync_page_io(struct drbd_conf *mdev, md_io.error = 0; if ((rw & WRITE) && !test_bit(MD_NO_FUA, &mdev->flags)) - rw |= REQ_FUA; + rw |= REQ_FUA | REQ_FLUSH; rw |= REQ_SYNC; bio = bio_alloc(GFP_NOIO, 1); diff --git a/drivers/block/drbd/drbd_bitmap.c b/drivers/block/drbd/drbd_bitmap.c index f440a02dfdb1..7b976296b564 100644 --- a/drivers/block/drbd/drbd_bitmap.c +++ b/drivers/block/drbd/drbd_bitmap.c @@ -112,9 +112,6 @@ struct drbd_bitmap { struct task_struct *bm_task; }; -static int __bm_change_bits_to(struct drbd_conf *mdev, const unsigned long s, - unsigned long e, int val, const enum km_type km); - #define bm_print_lock_info(m) __bm_print_lock_info(m, __func__) static void __bm_print_lock_info(struct drbd_conf *mdev, const char *func) { @@ -994,6 +991,9 @@ static void bm_page_io_async(struct bm_aio_ctx *ctx, int page_nr, int rw) __must bio_endio(bio, -EIO); } else { submit_bio(rw, bio); + /* this should not count as user activity and cause the + * resync to throttle -- see drbd_rs_should_slow_down(). */ + atomic_add(len >> 9, &mdev->rs_sect_ev); } } @@ -1256,7 +1256,7 @@ unsigned long _drbd_bm_find_next_zero(struct drbd_conf *mdev, unsigned long bm_f * expected to be called for only a few bits (e - s about BITS_PER_LONG). * Must hold bitmap lock already. */ static int __bm_change_bits_to(struct drbd_conf *mdev, const unsigned long s, - unsigned long e, int val, const enum km_type km) + unsigned long e, int val) { struct drbd_bitmap *b = mdev->bitmap; unsigned long *p_addr = NULL; @@ -1274,14 +1274,14 @@ static int __bm_change_bits_to(struct drbd_conf *mdev, const unsigned long s, unsigned int page_nr = bm_bit_to_page_idx(b, bitnr); if (page_nr != last_page_nr) { if (p_addr) - __bm_unmap(p_addr, km); + __bm_unmap(p_addr, KM_IRQ1); if (c < 0) bm_set_page_lazy_writeout(b->bm_pages[last_page_nr]); else if (c > 0) bm_set_page_need_writeout(b->bm_pages[last_page_nr]); changed_total += c; c = 0; - p_addr = __bm_map_pidx(b, page_nr, km); + p_addr = __bm_map_pidx(b, page_nr, KM_IRQ1); last_page_nr = page_nr; } if (val) @@ -1290,7 +1290,7 @@ static int __bm_change_bits_to(struct drbd_conf *mdev, const unsigned long s, c -= (0 != __test_and_clear_bit_le(bitnr & BITS_PER_PAGE_MASK, p_addr)); } if (p_addr) - __bm_unmap(p_addr, km); + __bm_unmap(p_addr, KM_IRQ1); if (c < 0) bm_set_page_lazy_writeout(b->bm_pages[last_page_nr]); else if (c > 0) @@ -1318,7 +1318,7 @@ static int bm_change_bits_to(struct drbd_conf *mdev, const unsigned long s, if ((val ? BM_DONT_SET : BM_DONT_CLEAR) & b->bm_flags) bm_print_lock_info(mdev); - c = __bm_change_bits_to(mdev, s, e, val, KM_IRQ1); + c = __bm_change_bits_to(mdev, s, e, val); spin_unlock_irqrestore(&b->bm_lock, flags); return c; @@ -1343,16 +1343,17 @@ static inline void bm_set_full_words_within_one_page(struct drbd_bitmap *b, { int i; int bits; - unsigned long *paddr = kmap_atomic(b->bm_pages[page_nr], KM_USER0); + unsigned long *paddr = kmap_atomic(b->bm_pages[page_nr], KM_IRQ1); for (i = first_word; i < last_word; i++) { bits = hweight_long(paddr[i]); paddr[i] = ~0UL; b->bm_set += BITS_PER_LONG - bits; } - kunmap_atomic(paddr, KM_USER0); + kunmap_atomic(paddr, KM_IRQ1); } -/* Same thing as drbd_bm_set_bits, but without taking the spin_lock_irqsave. +/* Same thing as drbd_bm_set_bits, + * but more efficient for a large bit range. * You must first drbd_bm_lock(). * Can be called to set the whole bitmap in one go. * Sets bits from s to e _inclusive_. */ @@ -1366,6 +1367,7 @@ void _drbd_bm_set_bits(struct drbd_conf *mdev, const unsigned long s, const unsi * Do not use memset, because we must account for changes, * so we need to loop over the words with hweight() anyways. */ + struct drbd_bitmap *b = mdev->bitmap; unsigned long sl = ALIGN(s,BITS_PER_LONG); unsigned long el = (e+1) & ~((unsigned long)BITS_PER_LONG-1); int first_page; @@ -1376,15 +1378,19 @@ void _drbd_bm_set_bits(struct drbd_conf *mdev, const unsigned long s, const unsi if (e - s <= 3*BITS_PER_LONG) { /* don't bother; el and sl may even be wrong. */ - __bm_change_bits_to(mdev, s, e, 1, KM_USER0); + spin_lock_irq(&b->bm_lock); + __bm_change_bits_to(mdev, s, e, 1); + spin_unlock_irq(&b->bm_lock); return; } /* difference is large enough that we can trust sl and el */ + spin_lock_irq(&b->bm_lock); + /* bits filling the current long */ if (sl) - __bm_change_bits_to(mdev, s, sl-1, 1, KM_USER0); + __bm_change_bits_to(mdev, s, sl-1, 1); first_page = sl >> (3 + PAGE_SHIFT); last_page = el >> (3 + PAGE_SHIFT); @@ -1397,8 +1403,10 @@ void _drbd_bm_set_bits(struct drbd_conf *mdev, const unsigned long s, const unsi /* first and full pages, unless first page == last page */ for (page_nr = first_page; page_nr < last_page; page_nr++) { bm_set_full_words_within_one_page(mdev->bitmap, page_nr, first_word, last_word); + spin_unlock_irq(&b->bm_lock); cond_resched(); first_word = 0; + spin_lock_irq(&b->bm_lock); } /* last page (respectively only page, for first page == last page) */ @@ -1411,7 +1419,8 @@ void _drbd_bm_set_bits(struct drbd_conf *mdev, const unsigned long s, const unsi * it would trigger an assert in __bm_change_bits_to() */ if (el <= e) - __bm_change_bits_to(mdev, el, e, 1, KM_USER0); + __bm_change_bits_to(mdev, el, e, 1); + spin_unlock_irq(&b->bm_lock); } /* returns bit state diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index 25d32c5aa50a..43beaca53179 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -4602,6 +4602,11 @@ int drbd_asender(struct drbd_thread *thi) dev_err(DEV, "meta connection shut down by peer.\n"); goto reconnect; } else if (rv == -EAGAIN) { + /* If the data socket received something meanwhile, + * that is good enough: peer is still alive. */ + if (time_after(mdev->last_received, + jiffies - mdev->meta.socket->sk->sk_rcvtimeo)) + continue; if (ping_timeout_active) { dev_err(DEV, "PingAck did not arrive in time.\n"); goto reconnect; @@ -4637,6 +4642,7 @@ int drbd_asender(struct drbd_thread *thi) goto reconnect; } if (received == expect) { + mdev->last_received = jiffies; D_ASSERT(cmd != NULL); if (!cmd->process(mdev, h)) goto reconnect; diff --git a/drivers/block/drbd/drbd_worker.c b/drivers/block/drbd/drbd_worker.c index 4d76b06b6b20..4d3e6f6213ba 100644 --- a/drivers/block/drbd/drbd_worker.c +++ b/drivers/block/drbd/drbd_worker.c @@ -536,12 +536,7 @@ static int w_make_resync_request(struct drbd_conf *mdev, return 1; } - /* starting with drbd 8.3.8, we can handle multi-bio EEs, - * if it should be necessary */ - max_bio_size = - mdev->agreed_pro_version < 94 ? queue_max_hw_sectors(mdev->rq_queue) << 9 : - mdev->agreed_pro_version < 95 ? DRBD_MAX_SIZE_H80_PACKET : DRBD_MAX_BIO_SIZE; - + max_bio_size = queue_max_hw_sectors(mdev->rq_queue) << 9; number = drbd_rs_number_requests(mdev); if (number == 0) goto requeue; diff --git a/drivers/bluetooth/btmrvl_debugfs.c b/drivers/bluetooth/btmrvl_debugfs.c index fd6305bf953e..8ecf4c6c2874 100644 --- a/drivers/bluetooth/btmrvl_debugfs.c +++ b/drivers/bluetooth/btmrvl_debugfs.c @@ -64,6 +64,8 @@ static ssize_t btmrvl_hscfgcmd_write(struct file *file, return -EFAULT; ret = strict_strtol(buf, 10, &result); + if (ret) + return ret; priv->btmrvl_dev.hscfgcmd = result; @@ -108,6 +110,8 @@ static ssize_t btmrvl_psmode_write(struct file *file, const char __user *ubuf, return -EFAULT; ret = strict_strtol(buf, 10, &result); + if (ret) + return ret; priv->btmrvl_dev.psmode = result; @@ -147,6 +151,8 @@ static ssize_t btmrvl_pscmd_write(struct file *file, const char __user *ubuf, return -EFAULT; ret = strict_strtol(buf, 10, &result); + if (ret) + return ret; priv->btmrvl_dev.pscmd = result; @@ -191,6 +197,8 @@ static ssize_t btmrvl_gpiogap_write(struct file *file, const char __user *ubuf, return -EFAULT; ret = strict_strtol(buf, 16, &result); + if (ret) + return ret; priv->btmrvl_dev.gpio_gap = result; @@ -230,6 +238,8 @@ static ssize_t btmrvl_hscmd_write(struct file *file, const char __user *ubuf, return -EFAULT; ret = strict_strtol(buf, 10, &result); + if (ret) + return ret; priv->btmrvl_dev.hscmd = result; if (priv->btmrvl_dev.hscmd) { @@ -272,6 +282,8 @@ static ssize_t btmrvl_hsmode_write(struct file *file, const char __user *ubuf, return -EFAULT; ret = strict_strtol(buf, 10, &result); + if (ret) + return ret; priv->btmrvl_dev.hsmode = result; diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c index 219d88a0eeae..dde6a0fad408 100644 --- a/drivers/connector/connector.c +++ b/drivers/connector/connector.c @@ -139,6 +139,7 @@ static int cn_call_callback(struct sk_buff *skb) spin_unlock_bh(&dev->cbdev->queue_lock); if (cbq != NULL) { + err = 0; cbq->callback(msg, nsp); kfree_skb(skb); cn_queue_release_callback(cbq); diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c index 4e04e1274388..596d5dd32f41 100644 --- a/drivers/cpufreq/acpi-cpufreq.c +++ b/drivers/cpufreq/acpi-cpufreq.c @@ -759,7 +759,7 @@ static void __exit acpi_cpufreq_exit(void) cpufreq_unregister_driver(&acpi_cpufreq_driver); - free_percpu(acpi_perf_data); + free_acpi_perf_data(); } module_param(acpi_pstate_strict, uint, 0644); diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 0a5bea9e3585..987a165ede26 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -1199,6 +1199,26 @@ unsigned int cpufreq_quick_get(unsigned int cpu) } EXPORT_SYMBOL(cpufreq_quick_get); +/** + * cpufreq_quick_get_max - get the max reported CPU frequency for this CPU + * @cpu: CPU number + * + * Just return the max possible frequency for a given CPU. + */ +unsigned int cpufreq_quick_get_max(unsigned int cpu) +{ + struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); + unsigned int ret_freq = 0; + + if (policy) { + ret_freq = policy->max; + cpufreq_cpu_put(policy); + } + + return ret_freq; +} +EXPORT_SYMBOL(cpufreq_quick_get_max); + static unsigned int __cpufreq_get(unsigned int cpu) { diff --git a/drivers/crypto/caam/caamalg.c b/drivers/crypto/caam/caamalg.c index d0e65d6ddc77..676d957c22b0 100644 --- a/drivers/crypto/caam/caamalg.c +++ b/drivers/crypto/caam/caamalg.c @@ -238,9 +238,9 @@ static int build_sh_desc_ipsec(struct caam_ctx *ctx) /* build shared descriptor for this session */ sh_desc = kmalloc(CAAM_CMD_SZ * DESC_AEAD_SHARED_TEXT_LEN + - keys_fit_inline ? - ctx->split_key_pad_len + ctx->enckeylen : - CAAM_PTR_SZ * 2, GFP_DMA | GFP_KERNEL); + (keys_fit_inline ? + ctx->split_key_pad_len + ctx->enckeylen : + CAAM_PTR_SZ * 2), GFP_DMA | GFP_KERNEL); if (!sh_desc) { dev_err(jrdev, "could not allocate shared descriptor\n"); return -ENOMEM; diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c index 438e6c831170..ebb897329c1e 100644 --- a/drivers/firewire/ohci.c +++ b/drivers/firewire/ohci.c @@ -264,6 +264,7 @@ static char ohci_driver_name[] = KBUILD_MODNAME; #define PCI_DEVICE_ID_AGERE_FW643 0x5901 #define PCI_DEVICE_ID_JMICRON_JMB38X_FW 0x2380 #define PCI_DEVICE_ID_TI_TSB12LV22 0x8009 +#define PCI_VENDOR_ID_PINNACLE_SYSTEMS 0x11bd #define QUIRK_CYCLE_TIMER 1 #define QUIRK_RESET_PACKET 2 @@ -3190,6 +3191,11 @@ static int __devinit pci_probe(struct pci_dev *dev, int i, err; size_t size; + if (dev->vendor == PCI_VENDOR_ID_PINNACLE_SYSTEMS) { + dev_err(&dev->dev, "Pinnacle MovieBoard is not yet supported\n"); + return -ENOSYS; + } + ohci = kzalloc(sizeof(*ohci), GFP_KERNEL); if (ohci == NULL) { err = -ENOMEM; diff --git a/drivers/firmware/google/Kconfig b/drivers/firmware/google/Kconfig index 87096b6ca5c9..2f21b0bfe653 100644 --- a/drivers/firmware/google/Kconfig +++ b/drivers/firmware/google/Kconfig @@ -13,6 +13,7 @@ menu "Google Firmware Drivers" config GOOGLE_SMI tristate "SMI interface for Google platforms" depends on ACPI && DMI + select EFI select EFI_VARS help Say Y here if you want to enable SMI callbacks for Google diff --git a/drivers/gpio/langwell_gpio.c b/drivers/gpio/langwell_gpio.c index bd6571e0097a..644ba1255d3c 100644 --- a/drivers/gpio/langwell_gpio.c +++ b/drivers/gpio/langwell_gpio.c @@ -223,7 +223,7 @@ static void lnw_irq_handler(unsigned irq, struct irq_desc *desc) gedr = gpio_reg(&lnw->chip, base, GEDR); pending = readl(gedr); while (pending) { - gpio = __ffs(pending) - 1; + gpio = __ffs(pending); mask = BIT(gpio); pending &= ~mask; /* Clear before handling so we can't lose an edge */ diff --git a/drivers/gpio/tps65910-gpio.c b/drivers/gpio/tps65910-gpio.c index 8d1ddfdd63eb..15097ca616d6 100644 --- a/drivers/gpio/tps65910-gpio.c +++ b/drivers/gpio/tps65910-gpio.c @@ -81,8 +81,10 @@ void tps65910_gpio_init(struct tps65910 *tps65910, int gpio_base) switch(tps65910_chip_id(tps65910)) { case TPS65910: tps65910->gpio.ngpio = 6; + break; case TPS65911: tps65910->gpio.ngpio = 9; + break; default: return; } diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 21058e6ad2b8..82db18506662 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -886,9 +886,6 @@ int drm_mode_group_init(struct drm_device *dev, struct drm_mode_group *group) total_objects += dev->mode_config.num_connector; total_objects += dev->mode_config.num_encoder; - if (total_objects == 0) - return -EINVAL; - group->id_list = kzalloc(total_objects * sizeof(uint32_t), GFP_KERNEL); if (!group->id_list) return -ENOMEM; diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 92369655dca3..f88a9b2c977b 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -560,6 +560,11 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) mode_changed = true; } else if (set->fb == NULL) { mode_changed = true; + } else if (set->fb->depth != set->crtc->fb->depth) { + mode_changed = true; + } else if (set->fb->bits_per_pixel != + set->crtc->fb->bits_per_pixel) { + mode_changed = true; } else fb_changed = true; } diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c index bad335966398..7c5b5f78f1fa 100644 --- a/drivers/gpu/drm/drm_gem.c +++ b/drivers/gpu/drm/drm_gem.c @@ -34,6 +34,7 @@ #include <linux/module.h> #include <linux/mman.h> #include <linux/pagemap.h> +#include <linux/shmem_fs.h> #include "drmP.h" /** @file drm_gem.c diff --git a/drivers/gpu/drm/drm_platform.c b/drivers/gpu/drm/drm_platform.c index 7223f06d8e58..2a8b6265ad3d 100644 --- a/drivers/gpu/drm/drm_platform.c +++ b/drivers/gpu/drm/drm_platform.c @@ -123,14 +123,15 @@ static int drm_platform_set_busid(struct drm_device *dev, struct drm_master *mas { int len, ret; - master->unique_len = 10 + strlen(dev->platformdev->name); + master->unique_len = 13 + strlen(dev->platformdev->name); + master->unique_size = master->unique_len; master->unique = kmalloc(master->unique_len + 1, GFP_KERNEL); if (master->unique == NULL) return -ENOMEM; len = snprintf(master->unique, master->unique_len, - "platform:%s", dev->platformdev->name); + "platform:%s:%02d", dev->platformdev->name, dev->platformdev->id); if (len > master->unique_len) { DRM_ERROR("Unique buffer overflowed\n"); diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 4d46441cbe2d..e2662497d50f 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -865,7 +865,7 @@ static int i915_cur_delayinfo(struct seq_file *m, void *unused) MEMSTAT_VID_SHIFT); seq_printf(m, "Current P-state: %d\n", (rgvstat & MEMSTAT_PSTATE_MASK) >> MEMSTAT_PSTATE_SHIFT); - } else if (IS_GEN6(dev)) { + } else if (IS_GEN6(dev) || IS_GEN7(dev)) { u32 gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS); u32 rp_state_limits = I915_READ(GEN6_RP_STATE_LIMITS); u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP); @@ -1123,6 +1123,44 @@ static int i915_emon_status(struct seq_file *m, void *unused) return 0; } +static int i915_ring_freq_table(struct seq_file *m, void *unused) +{ + struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_device *dev = node->minor->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + int ret; + int gpu_freq, ia_freq; + + if (!(IS_GEN6(dev) || IS_GEN7(dev))) { + seq_printf(m, "unsupported on this chipset\n"); + return 0; + } + + ret = mutex_lock_interruptible(&dev->struct_mutex); + if (ret) + return ret; + + seq_printf(m, "GPU freq (MHz)\tEffective CPU freq (MHz)\n"); + + for (gpu_freq = dev_priv->min_delay; gpu_freq <= dev_priv->max_delay; + gpu_freq++) { + I915_WRITE(GEN6_PCODE_DATA, gpu_freq); + I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY | + GEN6_PCODE_READ_MIN_FREQ_TABLE); + if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & + GEN6_PCODE_READY) == 0, 10)) { + DRM_ERROR("pcode read of freq table timed out\n"); + continue; + } + ia_freq = I915_READ(GEN6_PCODE_DATA); + seq_printf(m, "%d\t\t%d\n", gpu_freq * 50, ia_freq * 100); + } + + mutex_unlock(&dev->struct_mutex); + + return 0; +} + static int i915_gfxec(struct seq_file *m, void *unused) { struct drm_info_node *node = (struct drm_info_node *) m->private; @@ -1207,13 +1245,17 @@ static int i915_context_status(struct seq_file *m, void *unused) if (ret) return ret; - seq_printf(m, "power context "); - describe_obj(m, dev_priv->pwrctx); - seq_printf(m, "\n"); + if (dev_priv->pwrctx) { + seq_printf(m, "power context "); + describe_obj(m, dev_priv->pwrctx); + seq_printf(m, "\n"); + } - seq_printf(m, "render context "); - describe_obj(m, dev_priv->renderctx); - seq_printf(m, "\n"); + if (dev_priv->renderctx) { + seq_printf(m, "render context "); + describe_obj(m, dev_priv->renderctx); + seq_printf(m, "\n"); + } mutex_unlock(&dev->mode_config.mutex); @@ -1426,6 +1468,7 @@ static struct drm_info_list i915_debugfs_list[] = { {"i915_inttoext_table", i915_inttoext_table, 0}, {"i915_drpc_info", i915_drpc_info, 0}, {"i915_emon_status", i915_emon_status, 0}, + {"i915_ring_freq_table", i915_ring_freq_table, 0}, {"i915_gfxec", i915_gfxec, 0}, {"i915_fbc_status", i915_fbc_status, 0}, {"i915_sr_status", i915_sr_status, 0}, diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 0239e9974bf2..12712824a6d2 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1073,6 +1073,9 @@ static void i915_setup_compression(struct drm_device *dev, int size) unsigned long cfb_base; unsigned long ll_base = 0; + /* Just in case the BIOS is doing something questionable. */ + intel_disable_fbc(dev); + compressed_fb = drm_mm_search_free(&dev_priv->mm.stolen, size, 4096, 0); if (compressed_fb) compressed_fb = drm_mm_get_block(compressed_fb, size, 4096); @@ -1099,7 +1102,6 @@ static void i915_setup_compression(struct drm_device *dev, int size) dev_priv->cfb_size = size; - intel_disable_fbc(dev); dev_priv->compressed_fb = compressed_fb; if (HAS_PCH_SPLIT(dev)) I915_WRITE(ILK_DPFC_CB_BASE, compressed_fb->start); @@ -1266,30 +1268,6 @@ static int i915_load_modeset_init(struct drm_device *dev) intel_modeset_gem_init(dev); - if (IS_IVYBRIDGE(dev)) { - /* Share pre & uninstall handlers with ILK/SNB */ - dev->driver->irq_handler = ivybridge_irq_handler; - dev->driver->irq_preinstall = ironlake_irq_preinstall; - dev->driver->irq_postinstall = ivybridge_irq_postinstall; - dev->driver->irq_uninstall = ironlake_irq_uninstall; - dev->driver->enable_vblank = ivybridge_enable_vblank; - dev->driver->disable_vblank = ivybridge_disable_vblank; - } else if (HAS_PCH_SPLIT(dev)) { - dev->driver->irq_handler = ironlake_irq_handler; - dev->driver->irq_preinstall = ironlake_irq_preinstall; - dev->driver->irq_postinstall = ironlake_irq_postinstall; - dev->driver->irq_uninstall = ironlake_irq_uninstall; - dev->driver->enable_vblank = ironlake_enable_vblank; - dev->driver->disable_vblank = ironlake_disable_vblank; - } else { - dev->driver->irq_preinstall = i915_driver_irq_preinstall; - dev->driver->irq_postinstall = i915_driver_irq_postinstall; - dev->driver->irq_uninstall = i915_driver_irq_uninstall; - dev->driver->irq_handler = i915_driver_irq_handler; - dev->driver->enable_vblank = i915_enable_vblank; - dev->driver->disable_vblank = i915_disable_vblank; - } - ret = drm_irq_install(dev); if (ret) goto cleanup_gem; @@ -1967,7 +1945,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) if (!dev_priv->mm.gtt) { DRM_ERROR("Failed to initialize GTT\n"); ret = -ENODEV; - goto out_iomapfree; + goto out_rmmap; } agp_size = dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT; @@ -2011,18 +1989,13 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) if (dev_priv->wq == NULL) { DRM_ERROR("Failed to create our workqueue.\n"); ret = -ENOMEM; - goto out_iomapfree; + goto out_mtrrfree; } /* enable GEM by default */ dev_priv->has_gem = 1; - dev->driver->get_vblank_counter = i915_get_vblank_counter; - dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */ - if (IS_G4X(dev) || IS_GEN5(dev) || IS_GEN6(dev) || IS_IVYBRIDGE(dev)) { - dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */ - dev->driver->get_vblank_counter = gm45_get_vblank_counter; - } + intel_irq_init(dev); /* Try to make sure MCHBAR is enabled before poking at it */ intel_setup_mchbar(dev); @@ -2103,13 +2076,21 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) return 0; out_gem_unload: + if (dev_priv->mm.inactive_shrinker.shrink) + unregister_shrinker(&dev_priv->mm.inactive_shrinker); + if (dev->pdev->msi_enabled) pci_disable_msi(dev->pdev); intel_teardown_gmbus(dev); intel_teardown_mchbar(dev); destroy_workqueue(dev_priv->wq); -out_iomapfree: +out_mtrrfree: + if (dev_priv->mm.gtt_mtrr >= 0) { + mtrr_del(dev_priv->mm.gtt_mtrr, dev->agp->base, + dev->agp->agp_info.aper_size * 1024 * 1024); + dev_priv->mm.gtt_mtrr = -1; + } io_mapping_free(dev_priv->mm.gtt_mapping); out_rmmap: pci_iounmap(dev->pdev, dev_priv->regs); @@ -2182,9 +2163,8 @@ int i915_driver_unload(struct drm_device *dev) /* Flush any outstanding unpin_work. */ flush_workqueue(dev_priv->wq); - i915_gem_free_all_phys_object(dev); - mutex_lock(&dev->struct_mutex); + i915_gem_free_all_phys_object(dev); i915_gem_cleanup_ringbuffer(dev); mutex_unlock(&dev->struct_mutex); if (I915_HAS_FBC(dev) && i915_powersave) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 0defd4270594..ce045a8cf82c 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -37,38 +37,70 @@ #include <linux/console.h> #include "drm_crtc_helper.h" -static int i915_modeset = -1; +static int i915_modeset __read_mostly = -1; module_param_named(modeset, i915_modeset, int, 0400); +MODULE_PARM_DESC(modeset, + "Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, " + "1=on, -1=force vga console preference [default])"); -unsigned int i915_fbpercrtc = 0; +unsigned int i915_fbpercrtc __always_unused = 0; module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400); -int i915_panel_ignore_lid = 0; +int i915_panel_ignore_lid __read_mostly = 0; module_param_named(panel_ignore_lid, i915_panel_ignore_lid, int, 0600); +MODULE_PARM_DESC(panel_ignore_lid, + "Override lid status (0=autodetect [default], 1=lid open, " + "-1=lid closed)"); -unsigned int i915_powersave = 1; +unsigned int i915_powersave __read_mostly = 1; module_param_named(powersave, i915_powersave, int, 0600); +MODULE_PARM_DESC(powersave, + "Enable powersavings, fbc, downclocking, etc. (default: true)"); -unsigned int i915_semaphores = 0; +unsigned int i915_semaphores __read_mostly = 0; module_param_named(semaphores, i915_semaphores, int, 0600); +MODULE_PARM_DESC(semaphores, + "Use semaphores for inter-ring sync (default: false)"); -unsigned int i915_enable_rc6 = 1; +unsigned int i915_enable_rc6 __read_mostly = 0; module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0600); +MODULE_PARM_DESC(i915_enable_rc6, + "Enable power-saving render C-state 6 (default: true)"); -unsigned int i915_enable_fbc = 0; +unsigned int i915_enable_fbc __read_mostly = 1; module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600); +MODULE_PARM_DESC(i915_enable_fbc, + "Enable frame buffer compression for power savings " + "(default: false)"); -unsigned int i915_lvds_downclock = 0; +unsigned int i915_lvds_downclock __read_mostly = 0; module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400); +MODULE_PARM_DESC(lvds_downclock, + "Use panel (LVDS/eDP) downclocking for power savings " + "(default: false)"); -unsigned int i915_panel_use_ssc = 1; +unsigned int i915_panel_use_ssc __read_mostly = 1; module_param_named(lvds_use_ssc, i915_panel_use_ssc, int, 0600); +MODULE_PARM_DESC(lvds_use_ssc, + "Use Spread Spectrum Clock with panels [LVDS/eDP] " + "(default: true)"); -int i915_vbt_sdvo_panel_type = -1; +int i915_vbt_sdvo_panel_type __read_mostly = -1; module_param_named(vbt_sdvo_panel_type, i915_vbt_sdvo_panel_type, int, 0600); +MODULE_PARM_DESC(vbt_sdvo_panel_type, + "Override selection of SDVO panel mode in the VBT " + "(default: auto)"); -static bool i915_try_reset = true; +static bool i915_try_reset __read_mostly = true; module_param_named(reset, i915_try_reset, bool, 0600); +MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)"); + +bool i915_enable_hangcheck __read_mostly = true; +module_param_named(enable_hangcheck, i915_enable_hangcheck, bool, 0644); +MODULE_PARM_DESC(enable_hangcheck, + "Periodically check GPU activity for detecting hangs. " + "WARNING: Disabling this can cause system wide hangs. " + "(default: true)"); static struct drm_driver driver; extern int intel_agp_enabled; @@ -345,12 +377,17 @@ void gen6_gt_force_wake_put(struct drm_i915_private *dev_priv) void __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv) { - int loop = 500; - u32 fifo = I915_READ_NOTRACE(GT_FIFO_FREE_ENTRIES); - while (fifo < 20 && loop--) { - udelay(10); - fifo = I915_READ_NOTRACE(GT_FIFO_FREE_ENTRIES); + if (dev_priv->gt_fifo_count < GT_FIFO_NUM_RESERVED_ENTRIES ) { + int loop = 500; + u32 fifo = I915_READ_NOTRACE(GT_FIFO_FREE_ENTRIES); + while (fifo <= GT_FIFO_NUM_RESERVED_ENTRIES && loop--) { + udelay(10); + fifo = I915_READ_NOTRACE(GT_FIFO_FREE_ENTRIES); + } + WARN_ON(loop < 0 && fifo <= GT_FIFO_NUM_RESERVED_ENTRIES); + dev_priv->gt_fifo_count = fifo; } + dev_priv->gt_fifo_count--; } static int i915_drm_freeze(struct drm_device *dev) @@ -577,8 +614,12 @@ int i915_reset(struct drm_device *dev, u8 flags) if (get_seconds() - dev_priv->last_gpu_reset < 5) { DRM_ERROR("GPU hanging too fast, declaring wedged!\n"); } else switch (INTEL_INFO(dev)->gen) { + case 7: case 6: ret = gen6_do_reset(dev, flags); + /* If reset with a user forcewake, try to restore */ + if (atomic_read(&dev_priv->forcewake_count)) + __gen6_gt_force_wake_get(dev_priv); break; case 5: ret = ironlake_do_reset(dev, flags); @@ -762,14 +803,6 @@ static struct drm_driver driver = { .resume = i915_resume, .device_is_agp = i915_driver_device_is_agp, - .enable_vblank = i915_enable_vblank, - .disable_vblank = i915_disable_vblank, - .get_vblank_timestamp = i915_get_vblank_timestamp, - .get_scanout_position = i915_get_crtc_scanoutpos, - .irq_preinstall = i915_driver_irq_preinstall, - .irq_postinstall = i915_driver_irq_postinstall, - .irq_uninstall = i915_driver_irq_uninstall, - .irq_handler = i915_driver_irq_handler, .reclaim_buffers = drm_core_reclaim_buffers, .master_create = i915_master_create, .master_destroy = i915_master_destroy, diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index f63ee162f124..78cdd158287a 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -211,6 +211,11 @@ struct drm_i915_display_funcs { void (*fdi_link_train)(struct drm_crtc *crtc); void (*init_clock_gating)(struct drm_device *dev); void (*init_pch_clock_gating)(struct drm_device *dev); + int (*queue_flip)(struct drm_device *dev, struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_i915_gem_object *obj); + int (*update_plane)(struct drm_crtc *crtc, struct drm_framebuffer *fb, + int x, int y); /* clock updates for mode set */ /* cursor updates */ /* render clock increase/decrease */ @@ -261,6 +266,7 @@ enum intel_pch { #define QUIRK_PIPEA_FORCE (1<<0) struct intel_fbdev; +struct intel_fbc_work; typedef struct drm_i915_private { struct drm_device *dev; @@ -271,6 +277,7 @@ typedef struct drm_i915_private { int relative_constants_mode; void __iomem *regs; + u32 gt_fifo_count; struct intel_gmbus { struct i2c_adapter adapter; @@ -325,11 +332,10 @@ typedef struct drm_i915_private { uint32_t last_instdone1; unsigned long cfb_size; - unsigned long cfb_pitch; - unsigned long cfb_offset; - int cfb_fence; - int cfb_plane; + unsigned int cfb_fb; + enum plane cfb_plane; int cfb_y; + struct intel_fbc_work *fbc_work; struct intel_opregion opregion; @@ -982,20 +988,19 @@ struct drm_i915_file_private { extern struct drm_ioctl_desc i915_ioctls[]; extern int i915_max_ioctl; -extern unsigned int i915_fbpercrtc; -extern int i915_panel_ignore_lid; -extern unsigned int i915_powersave; -extern unsigned int i915_semaphores; -extern unsigned int i915_lvds_downclock; -extern unsigned int i915_panel_use_ssc; -extern int i915_vbt_sdvo_panel_type; -extern unsigned int i915_enable_rc6; -extern unsigned int i915_enable_fbc; +extern unsigned int i915_fbpercrtc __always_unused; +extern int i915_panel_ignore_lid __read_mostly; +extern unsigned int i915_powersave __read_mostly; +extern unsigned int i915_semaphores __read_mostly; +extern unsigned int i915_lvds_downclock __read_mostly; +extern unsigned int i915_panel_use_ssc __read_mostly; +extern int i915_vbt_sdvo_panel_type __read_mostly; +extern unsigned int i915_enable_rc6 __read_mostly; +extern unsigned int i915_enable_fbc __read_mostly; +extern bool i915_enable_hangcheck __read_mostly; extern int i915_suspend(struct drm_device *dev, pm_message_t state); extern int i915_resume(struct drm_device *dev); -extern void i915_save_display(struct drm_device *dev); -extern void i915_restore_display(struct drm_device *dev); extern int i915_master_create(struct drm_device *dev, struct drm_master *master); extern void i915_master_destroy(struct drm_device *dev, struct drm_master *master); @@ -1030,33 +1035,12 @@ extern int i915_irq_emit(struct drm_device *dev, void *data, extern int i915_irq_wait(struct drm_device *dev, void *data, struct drm_file *file_priv); -extern irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS); -extern void i915_driver_irq_preinstall(struct drm_device * dev); -extern int i915_driver_irq_postinstall(struct drm_device *dev); -extern void i915_driver_irq_uninstall(struct drm_device * dev); - -extern irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS); -extern void ironlake_irq_preinstall(struct drm_device *dev); -extern int ironlake_irq_postinstall(struct drm_device *dev); -extern void ironlake_irq_uninstall(struct drm_device *dev); - -extern irqreturn_t ivybridge_irq_handler(DRM_IRQ_ARGS); -extern void ivybridge_irq_preinstall(struct drm_device *dev); -extern int ivybridge_irq_postinstall(struct drm_device *dev); -extern void ivybridge_irq_uninstall(struct drm_device *dev); +extern void intel_irq_init(struct drm_device *dev); extern int i915_vblank_pipe_set(struct drm_device *dev, void *data, struct drm_file *file_priv); extern int i915_vblank_pipe_get(struct drm_device *dev, void *data, struct drm_file *file_priv); -extern int i915_enable_vblank(struct drm_device *dev, int crtc); -extern void i915_disable_vblank(struct drm_device *dev, int crtc); -extern int ironlake_enable_vblank(struct drm_device *dev, int crtc); -extern void ironlake_disable_vblank(struct drm_device *dev, int crtc); -extern int ivybridge_enable_vblank(struct drm_device *dev, int crtc); -extern void ivybridge_disable_vblank(struct drm_device *dev, int crtc); -extern u32 i915_get_vblank_counter(struct drm_device *dev, int crtc); -extern u32 gm45_get_vblank_counter(struct drm_device *dev, int crtc); extern int i915_vblank_swap(struct drm_device *dev, void *data, struct drm_file *file_priv); @@ -1067,13 +1051,6 @@ void i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask); void intel_enable_asle (struct drm_device *dev); -int i915_get_vblank_timestamp(struct drm_device *dev, int crtc, - int *max_error, - struct timeval *vblank_time, - unsigned flags); - -int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe, - int *vpos, int *hpos); #ifdef CONFIG_DEBUG_FS extern void i915_destroy_error_state(struct drm_device *dev); @@ -1190,7 +1167,7 @@ void i915_gem_clflush_object(struct drm_i915_gem_object *obj); int __must_check i915_gem_object_set_domain(struct drm_i915_gem_object *obj, uint32_t read_domains, uint32_t write_domain); -int __must_check i915_gem_object_flush_gpu(struct drm_i915_gem_object *obj); +int __must_check i915_gem_object_finish_gpu(struct drm_i915_gem_object *obj); int __must_check i915_gem_init_ringbuffer(struct drm_device *dev); void i915_gem_cleanup_ringbuffer(struct drm_device *dev); void i915_gem_do_init(struct drm_device *dev, @@ -1209,7 +1186,8 @@ int __must_check i915_gem_object_set_to_gtt_domain(struct drm_i915_gem_object *obj, bool write); int __must_check -i915_gem_object_set_to_display_plane(struct drm_i915_gem_object *obj, +i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, + u32 alignment, struct intel_ring_buffer *pipelined); int i915_gem_attach_phys_object(struct drm_device *dev, struct drm_i915_gem_object *obj, @@ -1223,9 +1201,14 @@ void i915_gem_release(struct drm_device *dev, struct drm_file *file); uint32_t i915_gem_get_unfenced_gtt_alignment(struct drm_i915_gem_object *obj); +int i915_gem_object_set_cache_level(struct drm_i915_gem_object *obj, + enum i915_cache_level cache_level); + /* i915_gem_gtt.c */ void i915_gem_restore_gtt_mappings(struct drm_device *dev); int __must_check i915_gem_gtt_bind_object(struct drm_i915_gem_object *obj); +void i915_gem_gtt_rebind_object(struct drm_i915_gem_object *obj, + enum i915_cache_level cache_level); void i915_gem_gtt_unbind_object(struct drm_i915_gem_object *obj); /* i915_gem_evict.c */ @@ -1307,12 +1290,8 @@ extern void intel_modeset_init(struct drm_device *dev); extern void intel_modeset_gem_init(struct drm_device *dev); extern void intel_modeset_cleanup(struct drm_device *dev); extern int intel_modeset_vga_set_state(struct drm_device *dev, bool state); -extern void i8xx_disable_fbc(struct drm_device *dev); -extern void g4x_disable_fbc(struct drm_device *dev); -extern void ironlake_disable_fbc(struct drm_device *dev); -extern void intel_disable_fbc(struct drm_device *dev); -extern void intel_enable_fbc(struct drm_crtc *crtc, unsigned long interval); extern bool intel_fbc_enabled(struct drm_device *dev); +extern void intel_disable_fbc(struct drm_device *dev); extern bool ironlake_set_drps(struct drm_device *dev, u8 val); extern void ironlake_enable_rc6(struct drm_device *dev); extern void gen6_set_rps(struct drm_device *dev, u8 val); diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 94c84d744100..e9d1d5c3a696 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -31,6 +31,7 @@ #include "i915_drv.h" #include "i915_trace.h" #include "intel_drv.h" +#include <linux/shmem_fs.h> #include <linux/slab.h> #include <linux/swap.h> #include <linux/pci.h> @@ -359,8 +360,7 @@ i915_gem_shmem_pread_fast(struct drm_device *dev, if ((page_offset + remain) > PAGE_SIZE) page_length = PAGE_SIZE - page_offset; - page = read_cache_page_gfp(mapping, offset >> PAGE_SHIFT, - GFP_HIGHUSER | __GFP_RECLAIMABLE); + page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT); if (IS_ERR(page)) return PTR_ERR(page); @@ -463,8 +463,7 @@ i915_gem_shmem_pread_slow(struct drm_device *dev, if ((data_page_offset + page_length) > PAGE_SIZE) page_length = PAGE_SIZE - data_page_offset; - page = read_cache_page_gfp(mapping, offset >> PAGE_SHIFT, - GFP_HIGHUSER | __GFP_RECLAIMABLE); + page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT); if (IS_ERR(page)) { ret = PTR_ERR(page); goto out; @@ -797,8 +796,7 @@ i915_gem_shmem_pwrite_fast(struct drm_device *dev, if ((page_offset + remain) > PAGE_SIZE) page_length = PAGE_SIZE - page_offset; - page = read_cache_page_gfp(mapping, offset >> PAGE_SHIFT, - GFP_HIGHUSER | __GFP_RECLAIMABLE); + page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT); if (IS_ERR(page)) return PTR_ERR(page); @@ -907,8 +905,7 @@ i915_gem_shmem_pwrite_slow(struct drm_device *dev, if ((data_page_offset + page_length) > PAGE_SIZE) page_length = PAGE_SIZE - data_page_offset; - page = read_cache_page_gfp(mapping, offset >> PAGE_SHIFT, - GFP_HIGHUSER | __GFP_RECLAIMABLE); + page = shmem_read_mapping_page(mapping, offset >> PAGE_SHIFT); if (IS_ERR(page)) { ret = PTR_ERR(page); goto out; @@ -1219,11 +1216,11 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) ret = i915_gem_object_bind_to_gtt(obj, 0, true); if (ret) goto unlock; - } - ret = i915_gem_object_set_to_gtt_domain(obj, write); - if (ret) - goto unlock; + ret = i915_gem_object_set_to_gtt_domain(obj, write); + if (ret) + goto unlock; + } if (obj->tiling_mode == I915_TILING_NONE) ret = i915_gem_object_put_fence(obj); @@ -1558,12 +1555,10 @@ i915_gem_object_get_pages_gtt(struct drm_i915_gem_object *obj, inode = obj->base.filp->f_path.dentry->d_inode; mapping = inode->i_mapping; + gfpmask |= mapping_gfp_mask(mapping); + for (i = 0; i < page_count; i++) { - page = read_cache_page_gfp(mapping, i, - GFP_HIGHUSER | - __GFP_COLD | - __GFP_RECLAIMABLE | - gfpmask); + page = shmem_read_mapping_page_gfp(mapping, i, gfpmask); if (IS_ERR(page)) goto err_pages; @@ -1701,13 +1696,10 @@ i915_gem_object_truncate(struct drm_i915_gem_object *obj) /* Our goal here is to return as much of the memory as * is possible back to the system as we are called from OOM. * To do this we must instruct the shmfs to drop all of its - * backing pages, *now*. Here we mirror the actions taken - * when by shmem_delete_inode() to release the backing store. + * backing pages, *now*. */ inode = obj->base.filp->f_path.dentry->d_inode; - truncate_inode_pages(inode->i_mapping, 0); - if (inode->i_op->truncate_range) - inode->i_op->truncate_range(inode, 0, (loff_t)-1); + shmem_truncate_range(inode, 0, (loff_t)-1); obj->madv = __I915_MADV_PURGED; } @@ -1779,8 +1771,11 @@ i915_add_request(struct intel_ring_buffer *ring, ring->outstanding_lazy_request = false; if (!dev_priv->mm.suspended) { - mod_timer(&dev_priv->hangcheck_timer, - jiffies + msecs_to_jiffies(DRM_I915_HANGCHECK_PERIOD)); + if (i915_enable_hangcheck) { + mod_timer(&dev_priv->hangcheck_timer, + jiffies + + msecs_to_jiffies(DRM_I915_HANGCHECK_PERIOD)); + } if (was_empty) queue_delayed_work(dev_priv->wq, &dev_priv->mm.retire_work, HZ); @@ -2080,8 +2075,8 @@ i915_wait_request(struct intel_ring_buffer *ring, if (!ier) { DRM_ERROR("something (likely vbetool) disabled " "interrupts, re-enabling\n"); - i915_driver_irq_preinstall(ring->dev); - i915_driver_irq_postinstall(ring->dev); + ring->dev->driver->irq_preinstall(ring->dev); + ring->dev->driver->irq_postinstall(ring->dev); } trace_i915_gem_request_wait_begin(ring, seqno); @@ -2151,6 +2146,30 @@ i915_gem_object_wait_rendering(struct drm_i915_gem_object *obj) return 0; } +static void i915_gem_object_finish_gtt(struct drm_i915_gem_object *obj) +{ + u32 old_write_domain, old_read_domains; + + /* Act a barrier for all accesses through the GTT */ + mb(); + + /* Force a pagefault for domain tracking on next user access */ + i915_gem_release_mmap(obj); + + if ((obj->base.read_domains & I915_GEM_DOMAIN_GTT) == 0) + return; + + old_read_domains = obj->base.read_domains; + old_write_domain = obj->base.write_domain; + + obj->base.read_domains &= ~I915_GEM_DOMAIN_GTT; + obj->base.write_domain &= ~I915_GEM_DOMAIN_GTT; + + trace_i915_gem_object_change_domain(obj, + old_read_domains, + old_write_domain); +} + /** * Unbinds an object from the GTT aperture. */ @@ -2167,23 +2186,28 @@ i915_gem_object_unbind(struct drm_i915_gem_object *obj) return -EINVAL; } - /* blow away mappings if mapped through GTT */ - i915_gem_release_mmap(obj); - - /* Move the object to the CPU domain to ensure that - * any possible CPU writes while it's not in the GTT - * are flushed when we go to remap it. This will - * also ensure that all pending GPU writes are finished - * before we unbind. - */ - ret = i915_gem_object_set_to_cpu_domain(obj, 1); + ret = i915_gem_object_finish_gpu(obj); if (ret == -ERESTARTSYS) return ret; /* Continue on if we fail due to EIO, the GPU is hung so we * should be safe and we need to cleanup or else we might * cause memory corruption through use-after-free. */ + + i915_gem_object_finish_gtt(obj); + + /* Move the object to the CPU domain to ensure that + * any possible CPU writes while it's not in the GTT + * are flushed when we go to remap it. + */ + if (ret == 0) + ret = i915_gem_object_set_to_cpu_domain(obj, 1); + if (ret == -ERESTARTSYS) + return ret; if (ret) { + /* In the event of a disaster, abandon all caches and + * hope for the best. + */ i915_gem_clflush_object(obj); obj->base.read_domains = obj->base.write_domain = I915_GEM_DOMAIN_CPU; } @@ -2926,8 +2950,6 @@ i915_gem_object_flush_gtt_write_domain(struct drm_i915_gem_object *obj) */ wmb(); - i915_gem_release_mmap(obj); - old_write_domain = obj->base.write_domain; obj->base.write_domain = 0; @@ -3007,51 +3029,139 @@ i915_gem_object_set_to_gtt_domain(struct drm_i915_gem_object *obj, bool write) return 0; } +int i915_gem_object_set_cache_level(struct drm_i915_gem_object *obj, + enum i915_cache_level cache_level) +{ + int ret; + + if (obj->cache_level == cache_level) + return 0; + + if (obj->pin_count) { + DRM_DEBUG("can not change the cache level of pinned objects\n"); + return -EBUSY; + } + + if (obj->gtt_space) { + ret = i915_gem_object_finish_gpu(obj); + if (ret) + return ret; + + i915_gem_object_finish_gtt(obj); + + /* Before SandyBridge, you could not use tiling or fence + * registers with snooped memory, so relinquish any fences + * currently pointing to our region in the aperture. + */ + if (INTEL_INFO(obj->base.dev)->gen < 6) { + ret = i915_gem_object_put_fence(obj); + if (ret) + return ret; + } + + i915_gem_gtt_rebind_object(obj, cache_level); + } + + if (cache_level == I915_CACHE_NONE) { + u32 old_read_domains, old_write_domain; + + /* If we're coming from LLC cached, then we haven't + * actually been tracking whether the data is in the + * CPU cache or not, since we only allow one bit set + * in obj->write_domain and have been skipping the clflushes. + * Just set it to the CPU cache for now. + */ + WARN_ON(obj->base.write_domain & ~I915_GEM_DOMAIN_CPU); + WARN_ON(obj->base.read_domains & ~I915_GEM_DOMAIN_CPU); + + old_read_domains = obj->base.read_domains; + old_write_domain = obj->base.write_domain; + + obj->base.read_domains = I915_GEM_DOMAIN_CPU; + obj->base.write_domain = I915_GEM_DOMAIN_CPU; + + trace_i915_gem_object_change_domain(obj, + old_read_domains, + old_write_domain); + } + + obj->cache_level = cache_level; + return 0; +} + /* - * Prepare buffer for display plane. Use uninterruptible for possible flush - * wait, as in modesetting process we're not supposed to be interrupted. + * Prepare buffer for display plane (scanout, cursors, etc). + * Can be called from an uninterruptible phase (modesetting) and allows + * any flushes to be pipelined (for pageflips). + * + * For the display plane, we want to be in the GTT but out of any write + * domains. So in many ways this looks like set_to_gtt_domain() apart from the + * ability to pipeline the waits, pinning and any additional subtleties + * that may differentiate the display plane from ordinary buffers. */ int -i915_gem_object_set_to_display_plane(struct drm_i915_gem_object *obj, +i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, + u32 alignment, struct intel_ring_buffer *pipelined) { - uint32_t old_read_domains; + u32 old_read_domains, old_write_domain; int ret; - /* Not valid to be called on unbound objects. */ - if (obj->gtt_space == NULL) - return -EINVAL; - ret = i915_gem_object_flush_gpu_write_domain(obj); if (ret) return ret; - - /* Currently, we are always called from an non-interruptible context. */ if (pipelined != obj->ring) { ret = i915_gem_object_wait_rendering(obj); if (ret) return ret; } + /* The display engine is not coherent with the LLC cache on gen6. As + * a result, we make sure that the pinning that is about to occur is + * done with uncached PTEs. This is lowest common denominator for all + * chipsets. + * + * However for gen6+, we could do better by using the GFDT bit instead + * of uncaching, which would allow us to flush all the LLC-cached data + * with that bit in the PTE to main memory with just one PIPE_CONTROL. + */ + ret = i915_gem_object_set_cache_level(obj, I915_CACHE_NONE); + if (ret) + return ret; + + /* As the user may map the buffer once pinned in the display plane + * (e.g. libkms for the bootup splash), we have to ensure that we + * always use map_and_fenceable for all scanout buffers. + */ + ret = i915_gem_object_pin(obj, alignment, true); + if (ret) + return ret; + i915_gem_object_flush_cpu_write_domain(obj); + old_write_domain = obj->base.write_domain; old_read_domains = obj->base.read_domains; + + /* It should now be out of any other write domains, and we can update + * the domain values for our changes. + */ + BUG_ON((obj->base.write_domain & ~I915_GEM_DOMAIN_GTT) != 0); obj->base.read_domains |= I915_GEM_DOMAIN_GTT; trace_i915_gem_object_change_domain(obj, old_read_domains, - obj->base.write_domain); + old_write_domain); return 0; } int -i915_gem_object_flush_gpu(struct drm_i915_gem_object *obj) +i915_gem_object_finish_gpu(struct drm_i915_gem_object *obj) { int ret; - if (!obj->active) + if ((obj->base.read_domains & I915_GEM_GPU_DOMAINS) == 0) return 0; if (obj->base.write_domain & I915_GEM_GPU_DOMAINS) { @@ -3060,6 +3170,9 @@ i915_gem_object_flush_gpu(struct drm_i915_gem_object *obj) return ret; } + /* Ensure that we invalidate the GPU's caches and TLBs. */ + obj->base.read_domains &= ~I915_GEM_GPU_DOMAINS; + return i915_gem_object_wait_rendering(obj); } @@ -3567,6 +3680,7 @@ struct drm_i915_gem_object *i915_gem_alloc_object(struct drm_device *dev, { struct drm_i915_private *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj; + struct address_space *mapping; obj = kzalloc(sizeof(*obj), GFP_KERNEL); if (obj == NULL) @@ -3577,12 +3691,31 @@ struct drm_i915_gem_object *i915_gem_alloc_object(struct drm_device *dev, return NULL; } + mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping; + mapping_set_gfp_mask(mapping, GFP_HIGHUSER | __GFP_RECLAIMABLE); + i915_gem_info_add_obj(dev_priv, size); obj->base.write_domain = I915_GEM_DOMAIN_CPU; obj->base.read_domains = I915_GEM_DOMAIN_CPU; - obj->cache_level = I915_CACHE_NONE; + if (IS_GEN6(dev)) { + /* On Gen6, we can have the GPU use the LLC (the CPU + * cache) for about a 10% performance improvement + * compared to uncached. Graphics requests other than + * display scanout are coherent with the CPU in + * accessing this cache. This means in this mode we + * don't need to clflush on the CPU side, and on the + * GPU side we only need to flush internal caches to + * get data visible to the CPU. + * + * However, we maintain the display planes as UC, and so + * need to rebind when first used as such. + */ + obj->cache_level = I915_CACHE_LLC; + } else + obj->cache_level = I915_CACHE_NONE; + obj->base.driver_private = NULL; obj->fence_reg = I915_FENCE_REG_NONE; INIT_LIST_HEAD(&obj->mm_list); @@ -3952,8 +4085,7 @@ void i915_gem_detach_phys_object(struct drm_device *dev, page_count = obj->base.size / PAGE_SIZE; for (i = 0; i < page_count; i++) { - struct page *page = read_cache_page_gfp(mapping, i, - GFP_HIGHUSER | __GFP_RECLAIMABLE); + struct page *page = shmem_read_mapping_page(mapping, i); if (!IS_ERR(page)) { char *dst = kmap_atomic(page); memcpy(dst, vaddr + i*PAGE_SIZE, PAGE_SIZE); @@ -4014,8 +4146,7 @@ i915_gem_attach_phys_object(struct drm_device *dev, struct page *page; char *dst, *src; - page = read_cache_page_gfp(mapping, i, - GFP_HIGHUSER | __GFP_RECLAIMABLE); + page = shmem_read_mapping_page(mapping, i); if (IS_ERR(page)) return PTR_ERR(page); diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index 20a4cc5b818f..4934cf84c320 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -187,10 +187,6 @@ i915_gem_object_set_to_gpu_domain(struct drm_i915_gem_object *obj, if ((flush_domains | invalidate_domains) & I915_GEM_DOMAIN_CPU) i915_gem_clflush_object(obj); - /* blow away mappings if mapped through GTT */ - if ((flush_domains | invalidate_domains) & I915_GEM_DOMAIN_GTT) - i915_gem_release_mmap(obj); - if (obj->base.pending_write_domain) cd->flips |= atomic_read(&obj->pending_flip); diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index e46b645773cf..7a709cd8d543 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -59,24 +59,8 @@ void i915_gem_restore_gtt_mappings(struct drm_device *dev) (dev_priv->mm.gtt_end - dev_priv->mm.gtt_start) / PAGE_SIZE); list_for_each_entry(obj, &dev_priv->mm.gtt_list, gtt_list) { - unsigned int agp_type = - cache_level_to_agp_type(dev, obj->cache_level); - i915_gem_clflush_object(obj); - - if (dev_priv->mm.gtt->needs_dmar) { - BUG_ON(!obj->sg_list); - - intel_gtt_insert_sg_entries(obj->sg_list, - obj->num_sg, - obj->gtt_space->start >> PAGE_SHIFT, - agp_type); - } else - intel_gtt_insert_pages(obj->gtt_space->start - >> PAGE_SHIFT, - obj->base.size >> PAGE_SHIFT, - obj->pages, - agp_type); + i915_gem_gtt_rebind_object(obj, obj->cache_level); } intel_gtt_chipset_flush(); @@ -110,6 +94,27 @@ int i915_gem_gtt_bind_object(struct drm_i915_gem_object *obj) return 0; } +void i915_gem_gtt_rebind_object(struct drm_i915_gem_object *obj, + enum i915_cache_level cache_level) +{ + struct drm_device *dev = obj->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + unsigned int agp_type = cache_level_to_agp_type(dev, cache_level); + + if (dev_priv->mm.gtt->needs_dmar) { + BUG_ON(!obj->sg_list); + + intel_gtt_insert_sg_entries(obj->sg_list, + obj->num_sg, + obj->gtt_space->start >> PAGE_SHIFT, + agp_type); + } else + intel_gtt_insert_pages(obj->gtt_space->start >> PAGE_SHIFT, + obj->base.size >> PAGE_SHIFT, + obj->pages, + agp_type); +} + void i915_gem_gtt_unbind_object(struct drm_i915_gem_object *obj) { intel_gtt_clear_range(obj->gtt_space->start >> PAGE_SHIFT, diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 9e34a1abeb61..23d1ae67d279 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -152,7 +152,7 @@ i915_pipe_enabled(struct drm_device *dev, int pipe) /* Called from drm generic code, passed a 'crtc', which * we use as a pipe index */ -u32 i915_get_vblank_counter(struct drm_device *dev, int pipe) +static u32 i915_get_vblank_counter(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long high_frame; @@ -184,7 +184,7 @@ u32 i915_get_vblank_counter(struct drm_device *dev, int pipe) return (high1 << 8) | low; } -u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe) +static u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; int reg = PIPE_FRMCOUNT_GM45(pipe); @@ -198,7 +198,7 @@ u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe) return I915_READ(reg); } -int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe, +static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe, int *vpos, int *hpos) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; @@ -264,7 +264,7 @@ int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe, return ret; } -int i915_get_vblank_timestamp(struct drm_device *dev, int pipe, +static int i915_get_vblank_timestamp(struct drm_device *dev, int pipe, int *max_error, struct timeval *vblank_time, unsigned flags) @@ -361,10 +361,12 @@ static void notify_ring(struct drm_device *dev, ring->irq_seqno = seqno; wake_up_all(&ring->irq_queue); - - dev_priv->hangcheck_count = 0; - mod_timer(&dev_priv->hangcheck_timer, - jiffies + msecs_to_jiffies(DRM_I915_HANGCHECK_PERIOD)); + if (i915_enable_hangcheck) { + dev_priv->hangcheck_count = 0; + mod_timer(&dev_priv->hangcheck_timer, + jiffies + + msecs_to_jiffies(DRM_I915_HANGCHECK_PERIOD)); + } } static void gen6_pm_rps_work(struct work_struct *work) @@ -462,7 +464,7 @@ static void pch_irq_handler(struct drm_device *dev) DRM_DEBUG_DRIVER("PCH transcoder A underrun interrupt\n"); } -irqreturn_t ivybridge_irq_handler(DRM_IRQ_ARGS) +static irqreturn_t ivybridge_irq_handler(DRM_IRQ_ARGS) { struct drm_device *dev = (struct drm_device *) arg; drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; @@ -550,7 +552,7 @@ done: return ret; } -irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS) +static irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS) { struct drm_device *dev = (struct drm_device *) arg; drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; @@ -1209,7 +1211,7 @@ static void i915_pageflip_stall_check(struct drm_device *dev, int pipe) } } -irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) +static irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) { struct drm_device *dev = (struct drm_device *) arg; drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; @@ -1454,7 +1456,7 @@ int i915_irq_wait(struct drm_device *dev, void *data, /* Called from drm generic code, passed 'crtc' which * we use as a pipe index */ -int i915_enable_vblank(struct drm_device *dev, int pipe) +static int i915_enable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long irqflags; @@ -1478,7 +1480,7 @@ int i915_enable_vblank(struct drm_device *dev, int pipe) return 0; } -int ironlake_enable_vblank(struct drm_device *dev, int pipe) +static int ironlake_enable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long irqflags; @@ -1494,7 +1496,7 @@ int ironlake_enable_vblank(struct drm_device *dev, int pipe) return 0; } -int ivybridge_enable_vblank(struct drm_device *dev, int pipe) +static int ivybridge_enable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long irqflags; @@ -1513,7 +1515,7 @@ int ivybridge_enable_vblank(struct drm_device *dev, int pipe) /* Called from drm generic code, passed 'crtc' which * we use as a pipe index */ -void i915_disable_vblank(struct drm_device *dev, int pipe) +static void i915_disable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long irqflags; @@ -1529,7 +1531,7 @@ void i915_disable_vblank(struct drm_device *dev, int pipe) spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); } -void ironlake_disable_vblank(struct drm_device *dev, int pipe) +static void ironlake_disable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long irqflags; @@ -1540,7 +1542,7 @@ void ironlake_disable_vblank(struct drm_device *dev, int pipe) spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); } -void ivybridge_disable_vblank(struct drm_device *dev, int pipe) +static void ivybridge_disable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long irqflags; @@ -1664,6 +1666,9 @@ void i915_hangcheck_elapsed(unsigned long data) uint32_t acthd, instdone, instdone1; bool err = false; + if (!i915_enable_hangcheck) + return; + /* If all work is done then ACTHD clearly hasn't advanced. */ if (i915_hangcheck_ring_idle(&dev_priv->ring[RCS], &err) && i915_hangcheck_ring_idle(&dev_priv->ring[VCS], &err) && @@ -1728,7 +1733,7 @@ repeat: /* drm_dma.h hooks */ -void ironlake_irq_preinstall(struct drm_device *dev) +static void ironlake_irq_preinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; @@ -1740,7 +1745,7 @@ void ironlake_irq_preinstall(struct drm_device *dev) INIT_WORK(&dev_priv->rps_work, gen6_pm_rps_work); I915_WRITE(HWSTAM, 0xeffe); - if (IS_GEN6(dev)) { + if (IS_GEN6(dev) || IS_GEN7(dev)) { /* Workaround stalls observed on Sandy Bridge GPUs by * making the blitter command streamer generate a * write to the Hardware Status Page for @@ -1749,6 +1754,7 @@ void ironlake_irq_preinstall(struct drm_device *dev) * happens. */ I915_WRITE(GEN6_BLITTER_HWSTAM, ~GEN6_BLITTER_USER_INTERRUPT); + I915_WRITE(GEN6_BSD_HWSTAM, ~GEN6_BSD_USER_INTERRUPT); } /* XXX hotplug from PCH */ @@ -1768,7 +1774,7 @@ void ironlake_irq_preinstall(struct drm_device *dev) POSTING_READ(SDEIER); } -int ironlake_irq_postinstall(struct drm_device *dev) +static int ironlake_irq_postinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; /* enable kind of interrupts always enabled */ @@ -1840,7 +1846,7 @@ int ironlake_irq_postinstall(struct drm_device *dev) return 0; } -int ivybridge_irq_postinstall(struct drm_device *dev) +static int ivybridge_irq_postinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; /* enable kind of interrupts always enabled */ @@ -1890,7 +1896,7 @@ int ivybridge_irq_postinstall(struct drm_device *dev) return 0; } -void i915_driver_irq_preinstall(struct drm_device * dev) +static void i915_driver_irq_preinstall(struct drm_device * dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; int pipe; @@ -1917,7 +1923,7 @@ void i915_driver_irq_preinstall(struct drm_device * dev) * Must be called after intel_modeset_init or hotplug interrupts won't be * enabled correctly. */ -int i915_driver_irq_postinstall(struct drm_device *dev) +static int i915_driver_irq_postinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; u32 enable_mask = I915_INTERRUPT_ENABLE_FIX | I915_INTERRUPT_ENABLE_VAR; @@ -1993,7 +1999,7 @@ int i915_driver_irq_postinstall(struct drm_device *dev) return 0; } -void ironlake_irq_uninstall(struct drm_device *dev) +static void ironlake_irq_uninstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; @@ -2013,7 +2019,7 @@ void ironlake_irq_uninstall(struct drm_device *dev) I915_WRITE(GTIIR, I915_READ(GTIIR)); } -void i915_driver_irq_uninstall(struct drm_device * dev) +static void i915_driver_irq_uninstall(struct drm_device * dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; int pipe; @@ -2039,3 +2045,41 @@ void i915_driver_irq_uninstall(struct drm_device * dev) I915_READ(PIPESTAT(pipe)) & 0x8000ffff); I915_WRITE(IIR, I915_READ(IIR)); } + +void intel_irq_init(struct drm_device *dev) +{ + dev->driver->get_vblank_counter = i915_get_vblank_counter; + dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */ + if (IS_G4X(dev) || IS_GEN5(dev) || IS_GEN6(dev) || IS_IVYBRIDGE(dev)) { + dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */ + dev->driver->get_vblank_counter = gm45_get_vblank_counter; + } + + + dev->driver->get_vblank_timestamp = i915_get_vblank_timestamp; + dev->driver->get_scanout_position = i915_get_crtc_scanoutpos; + + if (IS_IVYBRIDGE(dev)) { + /* Share pre & uninstall handlers with ILK/SNB */ + dev->driver->irq_handler = ivybridge_irq_handler; + dev->driver->irq_preinstall = ironlake_irq_preinstall; + dev->driver->irq_postinstall = ivybridge_irq_postinstall; + dev->driver->irq_uninstall = ironlake_irq_uninstall; + dev->driver->enable_vblank = ivybridge_enable_vblank; + dev->driver->disable_vblank = ivybridge_disable_vblank; + } else if (HAS_PCH_SPLIT(dev)) { + dev->driver->irq_handler = ironlake_irq_handler; + dev->driver->irq_preinstall = ironlake_irq_preinstall; + dev->driver->irq_postinstall = ironlake_irq_postinstall; + dev->driver->irq_uninstall = ironlake_irq_uninstall; + dev->driver->enable_vblank = ironlake_enable_vblank; + dev->driver->disable_vblank = ironlake_disable_vblank; + } else { + dev->driver->irq_preinstall = i915_driver_irq_preinstall; + dev->driver->irq_postinstall = i915_driver_irq_postinstall; + dev->driver->irq_uninstall = i915_driver_irq_uninstall; + dev->driver->irq_handler = i915_driver_irq_handler; + dev->driver->enable_vblank = i915_enable_vblank; + dev->driver->disable_vblank = i915_disable_vblank; + } +} diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 2f967af8e62e..02db299f621a 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -531,6 +531,7 @@ #define GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_ENABLE 0 #define GEN6_BSD_SLEEP_PSMI_CONTROL_IDLE_INDICATOR (1 << 3) +#define GEN6_BSD_HWSTAM 0x12098 #define GEN6_BSD_IMR 0x120a8 #define GEN6_BSD_USER_INTERRUPT (1 << 12) @@ -578,6 +579,7 @@ #define DPFC_CTL_PLANEA (0<<30) #define DPFC_CTL_PLANEB (1<<30) #define DPFC_CTL_FENCE_EN (1<<29) +#define DPFC_CTL_PERSISTENT_MODE (1<<25) #define DPFC_SR_EN (1<<10) #define DPFC_CTL_LIMIT_1X (0<<6) #define DPFC_CTL_LIMIT_2X (1<<6) @@ -3359,6 +3361,7 @@ #define FORCEWAKE_ACK 0x130090 #define GT_FIFO_FREE_ENTRIES 0x120008 +#define GT_FIFO_NUM_RESERVED_ENTRIES 20 #define GEN6_RPNSWREQ 0xA008 #define GEN6_TURBO_DISABLE (1<<31) @@ -3433,7 +3436,9 @@ #define GEN6_PCODE_MAILBOX 0x138124 #define GEN6_PCODE_READY (1<<31) #define GEN6_READ_OC_PARAMS 0xc -#define GEN6_PCODE_WRITE_MIN_FREQ_TABLE 0x9 +#define GEN6_PCODE_WRITE_MIN_FREQ_TABLE 0x8 +#define GEN6_PCODE_READ_MIN_FREQ_TABLE 0x9 #define GEN6_PCODE_DATA 0x138128 +#define GEN6_PCODE_FREQ_IA_RATIO_SHIFT 8 #endif /* _I915_REG_H_ */ diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index 60a94d2b5264..285758603ac8 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -597,7 +597,7 @@ static void i915_restore_modeset_reg(struct drm_device *dev) return; } -void i915_save_display(struct drm_device *dev) +static void i915_save_display(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -689,7 +689,7 @@ void i915_save_display(struct drm_device *dev) i915_save_vga(dev); } -void i915_restore_display(struct drm_device *dev) +static void i915_restore_display(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -760,15 +760,13 @@ void i915_restore_display(struct drm_device *dev) /* FIXME: restore TV & SDVO state */ /* only restore FBC info on the platform that supports FBC*/ + intel_disable_fbc(dev); if (I915_HAS_FBC(dev)) { if (HAS_PCH_SPLIT(dev)) { - ironlake_disable_fbc(dev); I915_WRITE(ILK_DPFC_CB_BASE, dev_priv->saveDPFC_CB_BASE); } else if (IS_GM45(dev)) { - g4x_disable_fbc(dev); I915_WRITE(DPFC_CB_BASE, dev_priv->saveDPFC_CB_BASE); } else { - i8xx_disable_fbc(dev); I915_WRITE(FBC_CFB_BASE, dev_priv->saveFBC_CFB_BASE); I915_WRITE(FBC_LL_BASE, dev_priv->saveFBC_LL_BASE); I915_WRITE(FBC_CONTROL2, dev_priv->saveFBC_CONTROL2); @@ -780,6 +778,7 @@ void i915_restore_display(struct drm_device *dev) I915_WRITE(CPU_VGACNTRL, dev_priv->saveVGACNTRL); else I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL); + I915_WRITE(VGA0, dev_priv->saveVGA0); I915_WRITE(VGA1, dev_priv->saveVGA1); I915_WRITE(VGA_PD, dev_priv->saveVGA_PD); @@ -796,6 +795,8 @@ int i915_save_state(struct drm_device *dev) pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB); + mutex_lock(&dev->struct_mutex); + /* Hardware status page */ dev_priv->saveHWS = I915_READ(HWS_PGA); @@ -835,6 +836,8 @@ int i915_save_state(struct drm_device *dev) for (i = 0; i < 3; i++) dev_priv->saveSWF2[i] = I915_READ(SWF30 + (i << 2)); + mutex_unlock(&dev->struct_mutex); + return 0; } @@ -845,6 +848,8 @@ int i915_restore_state(struct drm_device *dev) pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB); + mutex_lock(&dev->struct_mutex); + /* Hardware status page */ I915_WRITE(HWS_PGA, dev_priv->saveHWS); @@ -862,6 +867,7 @@ int i915_restore_state(struct drm_device *dev) I915_WRITE(IER, dev_priv->saveIER); I915_WRITE(IMR, dev_priv->saveIMR); } + mutex_unlock(&dev->struct_mutex); intel_init_clock_gating(dev); @@ -870,8 +876,12 @@ int i915_restore_state(struct drm_device *dev) intel_init_emon(dev); } - if (IS_GEN6(dev)) + if (IS_GEN6(dev)) { gen6_enable_rps(dev_priv); + gen6_update_ring_freq(dev_priv); + } + + mutex_lock(&dev->struct_mutex); /* Cache mode state */ I915_WRITE (CACHE_MODE_0, dev_priv->saveCACHE_MODE_0 | 0xffff0000); @@ -886,6 +896,8 @@ int i915_restore_state(struct drm_device *dev) for (i = 0; i < 3; i++) I915_WRITE(SWF30 + (i << 2), dev_priv->saveSWF2[i]); + mutex_unlock(&dev->struct_mutex); + intel_i2c_reset(dev); return 0; diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index 927442a11925..61abef8a8119 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -74,7 +74,7 @@ get_blocksize(void *p) static void fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode, - struct lvds_dvo_timing *dvo_timing) + const struct lvds_dvo_timing *dvo_timing) { panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) | dvo_timing->hactive_lo; @@ -115,20 +115,75 @@ fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode, drm_mode_set_name(panel_fixed_mode); } +static bool +lvds_dvo_timing_equal_size(const struct lvds_dvo_timing *a, + const struct lvds_dvo_timing *b) +{ + if (a->hactive_hi != b->hactive_hi || + a->hactive_lo != b->hactive_lo) + return false; + + if (a->hsync_off_hi != b->hsync_off_hi || + a->hsync_off_lo != b->hsync_off_lo) + return false; + + if (a->hsync_pulse_width != b->hsync_pulse_width) + return false; + + if (a->hblank_hi != b->hblank_hi || + a->hblank_lo != b->hblank_lo) + return false; + + if (a->vactive_hi != b->vactive_hi || + a->vactive_lo != b->vactive_lo) + return false; + + if (a->vsync_off != b->vsync_off) + return false; + + if (a->vsync_pulse_width != b->vsync_pulse_width) + return false; + + if (a->vblank_hi != b->vblank_hi || + a->vblank_lo != b->vblank_lo) + return false; + + return true; +} + +static const struct lvds_dvo_timing * +get_lvds_dvo_timing(const struct bdb_lvds_lfp_data *lvds_lfp_data, + const struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs, + int index) +{ + /* + * the size of fp_timing varies on the different platform. + * So calculate the DVO timing relative offset in LVDS data + * entry to get the DVO timing entry + */ + + int lfp_data_size = + lvds_lfp_data_ptrs->ptr[1].dvo_timing_offset - + lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset; + int dvo_timing_offset = + lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset - + lvds_lfp_data_ptrs->ptr[0].fp_timing_offset; + char *entry = (char *)lvds_lfp_data->data + lfp_data_size * index; + + return (struct lvds_dvo_timing *)(entry + dvo_timing_offset); +} + /* Try to find integrated panel data */ static void parse_lfp_panel_data(struct drm_i915_private *dev_priv, struct bdb_header *bdb) { - struct bdb_lvds_options *lvds_options; - struct bdb_lvds_lfp_data *lvds_lfp_data; - struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs; - struct bdb_lvds_lfp_data_entry *entry; - struct lvds_dvo_timing *dvo_timing; + const struct bdb_lvds_options *lvds_options; + const struct bdb_lvds_lfp_data *lvds_lfp_data; + const struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs; + const struct lvds_dvo_timing *panel_dvo_timing; struct drm_display_mode *panel_fixed_mode; - int lfp_data_size, dvo_timing_offset; - int i, temp_downclock; - struct drm_display_mode *temp_mode; + int i, downclock; lvds_options = find_section(bdb, BDB_LVDS_OPTIONS); if (!lvds_options) @@ -150,75 +205,44 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv, dev_priv->lvds_vbt = 1; - lfp_data_size = lvds_lfp_data_ptrs->ptr[1].dvo_timing_offset - - lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset; - entry = (struct bdb_lvds_lfp_data_entry *) - ((uint8_t *)lvds_lfp_data->data + (lfp_data_size * - lvds_options->panel_type)); - dvo_timing_offset = lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset - - lvds_lfp_data_ptrs->ptr[0].fp_timing_offset; - - /* - * the size of fp_timing varies on the different platform. - * So calculate the DVO timing relative offset in LVDS data - * entry to get the DVO timing entry - */ - dvo_timing = (struct lvds_dvo_timing *) - ((unsigned char *)entry + dvo_timing_offset); + panel_dvo_timing = get_lvds_dvo_timing(lvds_lfp_data, + lvds_lfp_data_ptrs, + lvds_options->panel_type); panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL); if (!panel_fixed_mode) return; - fill_detail_timing_data(panel_fixed_mode, dvo_timing); + fill_detail_timing_data(panel_fixed_mode, panel_dvo_timing); dev_priv->lfp_lvds_vbt_mode = panel_fixed_mode; DRM_DEBUG_KMS("Found panel mode in BIOS VBT tables:\n"); drm_mode_debug_printmodeline(panel_fixed_mode); - temp_mode = kzalloc(sizeof(*temp_mode), GFP_KERNEL); - temp_downclock = panel_fixed_mode->clock; /* - * enumerate the LVDS panel timing info entry in VBT to check whether - * the LVDS downclock is found. + * Iterate over the LVDS panel timing info to find the lowest clock + * for the native resolution. */ + downclock = panel_dvo_timing->clock; for (i = 0; i < 16; i++) { - entry = (struct bdb_lvds_lfp_data_entry *) - ((uint8_t *)lvds_lfp_data->data + (lfp_data_size * i)); - dvo_timing = (struct lvds_dvo_timing *) - ((unsigned char *)entry + dvo_timing_offset); - - fill_detail_timing_data(temp_mode, dvo_timing); - - if (temp_mode->hdisplay == panel_fixed_mode->hdisplay && - temp_mode->hsync_start == panel_fixed_mode->hsync_start && - temp_mode->hsync_end == panel_fixed_mode->hsync_end && - temp_mode->htotal == panel_fixed_mode->htotal && - temp_mode->vdisplay == panel_fixed_mode->vdisplay && - temp_mode->vsync_start == panel_fixed_mode->vsync_start && - temp_mode->vsync_end == panel_fixed_mode->vsync_end && - temp_mode->vtotal == panel_fixed_mode->vtotal && - temp_mode->clock < temp_downclock) { - /* - * downclock is already found. But we expect - * to find the lower downclock. - */ - temp_downclock = temp_mode->clock; - } - /* clear it to zero */ - memset(temp_mode, 0, sizeof(*temp_mode)); + const struct lvds_dvo_timing *dvo_timing; + + dvo_timing = get_lvds_dvo_timing(lvds_lfp_data, + lvds_lfp_data_ptrs, + i); + if (lvds_dvo_timing_equal_size(dvo_timing, panel_dvo_timing) && + dvo_timing->clock < downclock) + downclock = dvo_timing->clock; } - kfree(temp_mode); - if (temp_downclock < panel_fixed_mode->clock && - i915_lvds_downclock) { + + if (downclock < panel_dvo_timing->clock && i915_lvds_downclock) { dev_priv->lvds_downclock_avail = 1; - dev_priv->lvds_downclock = temp_downclock; + dev_priv->lvds_downclock = downclock * 10; DRM_DEBUG_KMS("LVDS downclock is found in VBT. " "Normal Clock %dKHz, downclock %dKHz\n", - temp_downclock, panel_fixed_mode->clock); + panel_fixed_mode->clock, 10*downclock); } - return; } /* Try to find sdvo panel data */ diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 81a9059b6a94..b5b15bda71d9 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -24,6 +24,7 @@ * Eric Anholt <eric@anholt.net> */ +#include <linux/cpufreq.h> #include <linux/module.h> #include <linux/input.h> #include <linux/i2c.h> @@ -1157,12 +1158,15 @@ static void intel_enable_transcoder(struct drm_i915_private *dev_priv, reg = TRANSCONF(pipe); val = I915_READ(reg); - /* - * make the BPC in transcoder be consistent with - * that in pipeconf reg. - */ - val &= ~PIPE_BPC_MASK; - val |= I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK; + + if (HAS_PCH_IBX(dev_priv->dev)) { + /* + * make the BPC in transcoder be consistent with + * that in pipeconf reg. + */ + val &= ~PIPE_BPC_MASK; + val |= I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK; + } I915_WRITE(reg, val | TRANS_ENABLE); if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100)) DRM_ERROR("failed to enable transcoder %d\n", pipe); @@ -1380,6 +1384,28 @@ static void intel_disable_pch_ports(struct drm_i915_private *dev_priv, disable_pch_hdmi(dev_priv, pipe, HDMID); } +static void i8xx_disable_fbc(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 fbc_ctl; + + /* Disable compression */ + fbc_ctl = I915_READ(FBC_CONTROL); + if ((fbc_ctl & FBC_CTL_EN) == 0) + return; + + fbc_ctl &= ~FBC_CTL_EN; + I915_WRITE(FBC_CONTROL, fbc_ctl); + + /* Wait for compressing bit to clear */ + if (wait_for((I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING) == 0, 10)) { + DRM_DEBUG_KMS("FBC idle timed out\n"); + return; + } + + DRM_DEBUG_KMS("disabled FBC\n"); +} + static void i8xx_enable_fbc(struct drm_crtc *crtc, unsigned long interval) { struct drm_device *dev = crtc->dev; @@ -1388,36 +1414,25 @@ static void i8xx_enable_fbc(struct drm_crtc *crtc, unsigned long interval) struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); struct drm_i915_gem_object *obj = intel_fb->obj; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int cfb_pitch; int plane, i; u32 fbc_ctl, fbc_ctl2; - if (fb->pitch == dev_priv->cfb_pitch && - obj->fence_reg == dev_priv->cfb_fence && - intel_crtc->plane == dev_priv->cfb_plane && - I915_READ(FBC_CONTROL) & FBC_CTL_EN) - return; - - i8xx_disable_fbc(dev); - - dev_priv->cfb_pitch = dev_priv->cfb_size / FBC_LL_SIZE; - - if (fb->pitch < dev_priv->cfb_pitch) - dev_priv->cfb_pitch = fb->pitch; + cfb_pitch = dev_priv->cfb_size / FBC_LL_SIZE; + if (fb->pitch < cfb_pitch) + cfb_pitch = fb->pitch; /* FBC_CTL wants 64B units */ - dev_priv->cfb_pitch = (dev_priv->cfb_pitch / 64) - 1; - dev_priv->cfb_fence = obj->fence_reg; - dev_priv->cfb_plane = intel_crtc->plane; - plane = dev_priv->cfb_plane == 0 ? FBC_CTL_PLANEA : FBC_CTL_PLANEB; + cfb_pitch = (cfb_pitch / 64) - 1; + plane = intel_crtc->plane == 0 ? FBC_CTL_PLANEA : FBC_CTL_PLANEB; /* Clear old tags */ for (i = 0; i < (FBC_LL_SIZE / 32) + 1; i++) I915_WRITE(FBC_TAG + (i * 4), 0); /* Set it up... */ - fbc_ctl2 = FBC_CTL_FENCE_DBL | FBC_CTL_IDLE_IMM | plane; - if (obj->tiling_mode != I915_TILING_NONE) - fbc_ctl2 |= FBC_CTL_CPU_FENCE; + fbc_ctl2 = FBC_CTL_FENCE_DBL | FBC_CTL_IDLE_IMM | FBC_CTL_CPU_FENCE; + fbc_ctl2 |= plane; I915_WRITE(FBC_CONTROL2, fbc_ctl2); I915_WRITE(FBC_FENCE_OFF, crtc->y); @@ -1425,36 +1440,13 @@ static void i8xx_enable_fbc(struct drm_crtc *crtc, unsigned long interval) fbc_ctl = FBC_CTL_EN | FBC_CTL_PERIODIC; if (IS_I945GM(dev)) fbc_ctl |= FBC_CTL_C3_IDLE; /* 945 needs special SR handling */ - fbc_ctl |= (dev_priv->cfb_pitch & 0xff) << FBC_CTL_STRIDE_SHIFT; + fbc_ctl |= (cfb_pitch & 0xff) << FBC_CTL_STRIDE_SHIFT; fbc_ctl |= (interval & 0x2fff) << FBC_CTL_INTERVAL_SHIFT; - if (obj->tiling_mode != I915_TILING_NONE) - fbc_ctl |= dev_priv->cfb_fence; + fbc_ctl |= obj->fence_reg; I915_WRITE(FBC_CONTROL, fbc_ctl); - DRM_DEBUG_KMS("enabled FBC, pitch %ld, yoff %d, plane %d, ", - dev_priv->cfb_pitch, crtc->y, dev_priv->cfb_plane); -} - -void i8xx_disable_fbc(struct drm_device *dev) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - u32 fbc_ctl; - - /* Disable compression */ - fbc_ctl = I915_READ(FBC_CONTROL); - if ((fbc_ctl & FBC_CTL_EN) == 0) - return; - - fbc_ctl &= ~FBC_CTL_EN; - I915_WRITE(FBC_CONTROL, fbc_ctl); - - /* Wait for compressing bit to clear */ - if (wait_for((I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING) == 0, 10)) { - DRM_DEBUG_KMS("FBC idle timed out\n"); - return; - } - - DRM_DEBUG_KMS("disabled FBC\n"); + DRM_DEBUG_KMS("enabled FBC, pitch %d, yoff %d, plane %d, ", + cfb_pitch, crtc->y, intel_crtc->plane); } static bool i8xx_fbc_enabled(struct drm_device *dev) @@ -1476,30 +1468,9 @@ static void g4x_enable_fbc(struct drm_crtc *crtc, unsigned long interval) unsigned long stall_watermark = 200; u32 dpfc_ctl; - dpfc_ctl = I915_READ(DPFC_CONTROL); - if (dpfc_ctl & DPFC_CTL_EN) { - if (dev_priv->cfb_pitch == dev_priv->cfb_pitch / 64 - 1 && - dev_priv->cfb_fence == obj->fence_reg && - dev_priv->cfb_plane == intel_crtc->plane && - dev_priv->cfb_y == crtc->y) - return; - - I915_WRITE(DPFC_CONTROL, dpfc_ctl & ~DPFC_CTL_EN); - intel_wait_for_vblank(dev, intel_crtc->pipe); - } - - dev_priv->cfb_pitch = (dev_priv->cfb_pitch / 64) - 1; - dev_priv->cfb_fence = obj->fence_reg; - dev_priv->cfb_plane = intel_crtc->plane; - dev_priv->cfb_y = crtc->y; - dpfc_ctl = plane | DPFC_SR_EN | DPFC_CTL_LIMIT_1X; - if (obj->tiling_mode != I915_TILING_NONE) { - dpfc_ctl |= DPFC_CTL_FENCE_EN | dev_priv->cfb_fence; - I915_WRITE(DPFC_CHICKEN, DPFC_HT_MODIFY); - } else { - I915_WRITE(DPFC_CHICKEN, ~DPFC_HT_MODIFY); - } + dpfc_ctl |= DPFC_CTL_FENCE_EN | obj->fence_reg; + I915_WRITE(DPFC_CHICKEN, DPFC_HT_MODIFY); I915_WRITE(DPFC_RECOMP_CTL, DPFC_RECOMP_STALL_EN | (stall_watermark << DPFC_RECOMP_STALL_WM_SHIFT) | @@ -1512,7 +1483,7 @@ static void g4x_enable_fbc(struct drm_crtc *crtc, unsigned long interval) DRM_DEBUG_KMS("enabled fbc on plane %d\n", intel_crtc->plane); } -void g4x_disable_fbc(struct drm_device *dev) +static void g4x_disable_fbc(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; u32 dpfc_ctl; @@ -1567,32 +1538,12 @@ static void ironlake_enable_fbc(struct drm_crtc *crtc, unsigned long interval) u32 dpfc_ctl; dpfc_ctl = I915_READ(ILK_DPFC_CONTROL); - if (dpfc_ctl & DPFC_CTL_EN) { - if (dev_priv->cfb_pitch == dev_priv->cfb_pitch / 64 - 1 && - dev_priv->cfb_fence == obj->fence_reg && - dev_priv->cfb_plane == intel_crtc->plane && - dev_priv->cfb_offset == obj->gtt_offset && - dev_priv->cfb_y == crtc->y) - return; - - I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl & ~DPFC_CTL_EN); - intel_wait_for_vblank(dev, intel_crtc->pipe); - } - - dev_priv->cfb_pitch = (dev_priv->cfb_pitch / 64) - 1; - dev_priv->cfb_fence = obj->fence_reg; - dev_priv->cfb_plane = intel_crtc->plane; - dev_priv->cfb_offset = obj->gtt_offset; - dev_priv->cfb_y = crtc->y; - dpfc_ctl &= DPFC_RESERVED; dpfc_ctl |= (plane | DPFC_CTL_LIMIT_1X); - if (obj->tiling_mode != I915_TILING_NONE) { - dpfc_ctl |= (DPFC_CTL_FENCE_EN | dev_priv->cfb_fence); - I915_WRITE(ILK_DPFC_CHICKEN, DPFC_HT_MODIFY); - } else { - I915_WRITE(ILK_DPFC_CHICKEN, ~DPFC_HT_MODIFY); - } + /* Set persistent mode for front-buffer rendering, ala X. */ + dpfc_ctl |= DPFC_CTL_PERSISTENT_MODE; + dpfc_ctl |= (DPFC_CTL_FENCE_EN | obj->fence_reg); + I915_WRITE(ILK_DPFC_CHICKEN, DPFC_HT_MODIFY); I915_WRITE(ILK_DPFC_RECOMP_CTL, DPFC_RECOMP_STALL_EN | (stall_watermark << DPFC_RECOMP_STALL_WM_SHIFT) | @@ -1604,7 +1555,7 @@ static void ironlake_enable_fbc(struct drm_crtc *crtc, unsigned long interval) if (IS_GEN6(dev)) { I915_WRITE(SNB_DPFC_CTL_SA, - SNB_CPU_FENCE_ENABLE | dev_priv->cfb_fence); + SNB_CPU_FENCE_ENABLE | obj->fence_reg); I915_WRITE(DPFC_CPU_FENCE_OFFSET, crtc->y); sandybridge_blit_fbc_update(dev); } @@ -1612,7 +1563,7 @@ static void ironlake_enable_fbc(struct drm_crtc *crtc, unsigned long interval) DRM_DEBUG_KMS("enabled fbc on plane %d\n", intel_crtc->plane); } -void ironlake_disable_fbc(struct drm_device *dev) +static void ironlake_disable_fbc(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; u32 dpfc_ctl; @@ -1644,24 +1595,109 @@ bool intel_fbc_enabled(struct drm_device *dev) return dev_priv->display.fbc_enabled(dev); } -void intel_enable_fbc(struct drm_crtc *crtc, unsigned long interval) +static void intel_fbc_work_fn(struct work_struct *__work) { - struct drm_i915_private *dev_priv = crtc->dev->dev_private; + struct intel_fbc_work *work = + container_of(to_delayed_work(__work), + struct intel_fbc_work, work); + struct drm_device *dev = work->crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + mutex_lock(&dev->struct_mutex); + if (work == dev_priv->fbc_work) { + /* Double check that we haven't switched fb without cancelling + * the prior work. + */ + if (work->crtc->fb == work->fb) { + dev_priv->display.enable_fbc(work->crtc, + work->interval); + + dev_priv->cfb_plane = to_intel_crtc(work->crtc)->plane; + dev_priv->cfb_fb = work->crtc->fb->base.id; + dev_priv->cfb_y = work->crtc->y; + } + + dev_priv->fbc_work = NULL; + } + mutex_unlock(&dev->struct_mutex); + + kfree(work); +} + +static void intel_cancel_fbc_work(struct drm_i915_private *dev_priv) +{ + if (dev_priv->fbc_work == NULL) + return; + + DRM_DEBUG_KMS("cancelling pending FBC enable\n"); + + /* Synchronisation is provided by struct_mutex and checking of + * dev_priv->fbc_work, so we can perform the cancellation + * entirely asynchronously. + */ + if (cancel_delayed_work(&dev_priv->fbc_work->work)) + /* tasklet was killed before being run, clean up */ + kfree(dev_priv->fbc_work); + + /* Mark the work as no longer wanted so that if it does + * wake-up (because the work was already running and waiting + * for our mutex), it will discover that is no longer + * necessary to run. + */ + dev_priv->fbc_work = NULL; +} + +static void intel_enable_fbc(struct drm_crtc *crtc, unsigned long interval) +{ + struct intel_fbc_work *work; + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; if (!dev_priv->display.enable_fbc) return; - dev_priv->display.enable_fbc(crtc, interval); + intel_cancel_fbc_work(dev_priv); + + work = kzalloc(sizeof *work, GFP_KERNEL); + if (work == NULL) { + dev_priv->display.enable_fbc(crtc, interval); + return; + } + + work->crtc = crtc; + work->fb = crtc->fb; + work->interval = interval; + INIT_DELAYED_WORK(&work->work, intel_fbc_work_fn); + + dev_priv->fbc_work = work; + + DRM_DEBUG_KMS("scheduling delayed FBC enable\n"); + + /* Delay the actual enabling to let pageflipping cease and the + * display to settle before starting the compression. Note that + * this delay also serves a second purpose: it allows for a + * vblank to pass after disabling the FBC before we attempt + * to modify the control registers. + * + * A more complicated solution would involve tracking vblanks + * following the termination of the page-flipping sequence + * and indeed performing the enable as a co-routine and not + * waiting synchronously upon the vblank. + */ + schedule_delayed_work(&work->work, msecs_to_jiffies(50)); } void intel_disable_fbc(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; + intel_cancel_fbc_work(dev_priv); + if (!dev_priv->display.disable_fbc) return; dev_priv->display.disable_fbc(dev); + dev_priv->cfb_plane = -1; } /** @@ -1760,8 +1796,13 @@ static void intel_update_fbc(struct drm_device *dev) dev_priv->no_fbc_reason = FBC_BAD_PLANE; goto out_disable; } - if (obj->tiling_mode != I915_TILING_X) { - DRM_DEBUG_KMS("framebuffer not tiled, disabling compression\n"); + + /* The use of a CPU fence is mandatory in order to detect writes + * by the CPU to the scanout and trigger updates to the FBC. + */ + if (obj->tiling_mode != I915_TILING_X || + obj->fence_reg == I915_FENCE_REG_NONE) { + DRM_DEBUG_KMS("framebuffer not tiled or fenced, disabling compression\n"); dev_priv->no_fbc_reason = FBC_NOT_TILED; goto out_disable; } @@ -1770,6 +1811,44 @@ static void intel_update_fbc(struct drm_device *dev) if (in_dbg_master()) goto out_disable; + /* If the scanout has not changed, don't modify the FBC settings. + * Note that we make the fundamental assumption that the fb->obj + * cannot be unpinned (and have its GTT offset and fence revoked) + * without first being decoupled from the scanout and FBC disabled. + */ + if (dev_priv->cfb_plane == intel_crtc->plane && + dev_priv->cfb_fb == fb->base.id && + dev_priv->cfb_y == crtc->y) + return; + + if (intel_fbc_enabled(dev)) { + /* We update FBC along two paths, after changing fb/crtc + * configuration (modeswitching) and after page-flipping + * finishes. For the latter, we know that not only did + * we disable the FBC at the start of the page-flip + * sequence, but also more than one vblank has passed. + * + * For the former case of modeswitching, it is possible + * to switch between two FBC valid configurations + * instantaneously so we do need to disable the FBC + * before we can modify its control registers. We also + * have to wait for the next vblank for that to take + * effect. However, since we delay enabling FBC we can + * assume that a vblank has passed since disabling and + * that we can safely alter the registers in the deferred + * callback. + * + * In the scenario that we go from a valid to invalid + * and then back to valid FBC configuration we have + * no strict enforcement that a vblank occurred since + * disabling the FBC. However, along all current pipe + * disabling paths we do need to wait for a vblank at + * some point. And we wait before enabling FBC anyway. + */ + DRM_DEBUG_KMS("disabling active FBC for update\n"); + intel_disable_fbc(dev); + } + intel_enable_fbc(crtc, 500); return; @@ -1812,14 +1891,10 @@ intel_pin_and_fence_fb_obj(struct drm_device *dev, } dev_priv->mm.interruptible = false; - ret = i915_gem_object_pin(obj, alignment, true); + ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined); if (ret) goto err_interruptible; - ret = i915_gem_object_set_to_display_plane(obj, pipelined); - if (ret) - goto err_unpin; - /* Install a fence for tiled scan-out. Pre-i965 always needs a * fence, whereas 965+ only requires a fence if using * framebuffer compression. For simplicity, we always install @@ -1841,10 +1916,8 @@ err_interruptible: return ret; } -/* Assume fb object is pinned & idle & fenced and just update base pointers */ -static int -intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb, - int x, int y, enum mode_set_atomic state) +static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb, + int x, int y) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -1887,7 +1960,7 @@ intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb, dspcntr |= DISPPLANE_32BPP_NO_ALPHA; break; default: - DRM_ERROR("Unknown color depth\n"); + DRM_ERROR("Unknown color depth %d\n", fb->bits_per_pixel); return -EINVAL; } if (INTEL_INFO(dev)->gen >= 4) { @@ -1897,10 +1970,6 @@ intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb, dspcntr &= ~DISPPLANE_TILED; } - if (HAS_PCH_SPLIT(dev)) - /* must disable */ - dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE; - I915_WRITE(reg, dspcntr); Start = obj->gtt_offset; @@ -1917,6 +1986,99 @@ intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb, I915_WRITE(DSPADDR(plane), Start + Offset); POSTING_READ(reg); + return 0; +} + +static int ironlake_update_plane(struct drm_crtc *crtc, + struct drm_framebuffer *fb, int x, int y) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_framebuffer *intel_fb; + struct drm_i915_gem_object *obj; + int plane = intel_crtc->plane; + unsigned long Start, Offset; + u32 dspcntr; + u32 reg; + + switch (plane) { + case 0: + case 1: + break; + default: + DRM_ERROR("Can't update plane %d in SAREA\n", plane); + return -EINVAL; + } + + intel_fb = to_intel_framebuffer(fb); + obj = intel_fb->obj; + + reg = DSPCNTR(plane); + dspcntr = I915_READ(reg); + /* Mask out pixel format bits in case we change it */ + dspcntr &= ~DISPPLANE_PIXFORMAT_MASK; + switch (fb->bits_per_pixel) { + case 8: + dspcntr |= DISPPLANE_8BPP; + break; + case 16: + if (fb->depth != 16) + return -EINVAL; + + dspcntr |= DISPPLANE_16BPP; + break; + case 24: + case 32: + if (fb->depth == 24) + dspcntr |= DISPPLANE_32BPP_NO_ALPHA; + else if (fb->depth == 30) + dspcntr |= DISPPLANE_32BPP_30BIT_NO_ALPHA; + else + return -EINVAL; + break; + default: + DRM_ERROR("Unknown color depth %d\n", fb->bits_per_pixel); + return -EINVAL; + } + + if (obj->tiling_mode != I915_TILING_NONE) + dspcntr |= DISPPLANE_TILED; + else + dspcntr &= ~DISPPLANE_TILED; + + /* must disable */ + dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE; + + I915_WRITE(reg, dspcntr); + + Start = obj->gtt_offset; + Offset = y * fb->pitch + x * (fb->bits_per_pixel / 8); + + DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n", + Start, Offset, x, y, fb->pitch); + I915_WRITE(DSPSTRIDE(plane), fb->pitch); + I915_WRITE(DSPSURF(plane), Start); + I915_WRITE(DSPTILEOFF(plane), (y << 16) | x); + I915_WRITE(DSPADDR(plane), Offset); + POSTING_READ(reg); + + return 0; +} + +/* Assume fb object is pinned & idle & fenced and just update base pointers */ +static int +intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb, + int x, int y, enum mode_set_atomic state) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + int ret; + + ret = dev_priv->display.update_plane(crtc, fb, x, y); + if (ret) + return ret; + intel_update_fbc(dev); intel_increase_pllclock(crtc); @@ -1971,7 +2133,7 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, * This should only fail upon a hung GPU, in which case we * can safely continue. */ - ret = i915_gem_object_flush_gpu(obj); + ret = i915_gem_object_finish_gpu(obj); (void) ret; } @@ -2622,6 +2784,7 @@ static void ironlake_pch_enable(struct drm_crtc *crtc) /* For PCH DP, enable TRANS_DP_CTL */ if (HAS_PCH_CPT(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) { + u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) >> 5; reg = TRANS_DP_CTL(pipe); temp = I915_READ(reg); temp &= ~(TRANS_DP_PORT_SEL_MASK | @@ -2629,7 +2792,7 @@ static void ironlake_pch_enable(struct drm_crtc *crtc) TRANS_DP_BPC_MASK); temp |= (TRANS_DP_OUTPUT_ENABLE | TRANS_DP_ENH_FRAMING); - temp |= TRANS_DP_8BPC; + temp |= bpc << 9; /* same format but at 11:9 */ if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC) temp |= TRANS_DP_HSYNC_ACTIVE_HIGH; @@ -2732,9 +2895,8 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc) intel_disable_plane(dev_priv, plane, pipe); - if (dev_priv->cfb_plane == plane && - dev_priv->display.disable_fbc) - dev_priv->display.disable_fbc(dev); + if (dev_priv->cfb_plane == plane) + intel_disable_fbc(dev); intel_disable_pipe(dev_priv, pipe); @@ -2898,9 +3060,8 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc) intel_crtc_dpms_overlay(intel_crtc, false); intel_crtc_update_cursor(crtc, false); - if (dev_priv->cfb_plane == plane && - dev_priv->display.disable_fbc) - dev_priv->display.disable_fbc(dev); + if (dev_priv->cfb_plane == plane) + intel_disable_fbc(dev); intel_disable_plane(dev_priv, plane, pipe); intel_disable_pipe(dev_priv, pipe); @@ -4308,6 +4469,133 @@ static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv) return dev_priv->lvds_use_ssc && i915_panel_use_ssc; } +/** + * intel_choose_pipe_bpp_dither - figure out what color depth the pipe should send + * @crtc: CRTC structure + * + * A pipe may be connected to one or more outputs. Based on the depth of the + * attached framebuffer, choose a good color depth to use on the pipe. + * + * If possible, match the pipe depth to the fb depth. In some cases, this + * isn't ideal, because the connected output supports a lesser or restricted + * set of depths. Resolve that here: + * LVDS typically supports only 6bpc, so clamp down in that case + * HDMI supports only 8bpc or 12bpc, so clamp to 8bpc with dither for 10bpc + * Displays may support a restricted set as well, check EDID and clamp as + * appropriate. + * + * RETURNS: + * Dithering requirement (i.e. false if display bpc and pipe bpc match, + * true if they don't match). + */ +static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, + unsigned int *pipe_bpp) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_encoder *encoder; + struct drm_connector *connector; + unsigned int display_bpc = UINT_MAX, bpc; + + /* Walk the encoders & connectors on this crtc, get min bpc */ + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + struct intel_encoder *intel_encoder = to_intel_encoder(encoder); + + if (encoder->crtc != crtc) + continue; + + if (intel_encoder->type == INTEL_OUTPUT_LVDS) { + unsigned int lvds_bpc; + + if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) == + LVDS_A3_POWER_UP) + lvds_bpc = 8; + else + lvds_bpc = 6; + + if (lvds_bpc < display_bpc) { + DRM_DEBUG_DRIVER("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc); + display_bpc = lvds_bpc; + } + continue; + } + + if (intel_encoder->type == INTEL_OUTPUT_EDP) { + /* Use VBT settings if we have an eDP panel */ + unsigned int edp_bpc = dev_priv->edp.bpp / 3; + + if (edp_bpc < display_bpc) { + DRM_DEBUG_DRIVER("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc); + display_bpc = edp_bpc; + } + continue; + } + + /* Not one of the known troublemakers, check the EDID */ + list_for_each_entry(connector, &dev->mode_config.connector_list, + head) { + if (connector->encoder != encoder) + continue; + + if (connector->display_info.bpc < display_bpc) { + DRM_DEBUG_DRIVER("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc); + display_bpc = connector->display_info.bpc; + } + } + + /* + * HDMI is either 12 or 8, so if the display lets 10bpc sneak + * through, clamp it down. (Note: >12bpc will be caught below.) + */ + if (intel_encoder->type == INTEL_OUTPUT_HDMI) { + if (display_bpc > 8 && display_bpc < 12) { + DRM_DEBUG_DRIVER("forcing bpc to 12 for HDMI\n"); + display_bpc = 12; + } else { + DRM_DEBUG_DRIVER("forcing bpc to 8 for HDMI\n"); + display_bpc = 8; + } + } + } + + /* + * We could just drive the pipe at the highest bpc all the time and + * enable dithering as needed, but that costs bandwidth. So choose + * the minimum value that expresses the full color range of the fb but + * also stays within the max display bpc discovered above. + */ + + switch (crtc->fb->depth) { + case 8: + bpc = 8; /* since we go through a colormap */ + break; + case 15: + case 16: + bpc = 6; /* min is 18bpp */ + break; + case 24: + bpc = min((unsigned int)8, display_bpc); + break; + case 30: + bpc = min((unsigned int)10, display_bpc); + break; + case 48: + bpc = min((unsigned int)12, display_bpc); + break; + default: + DRM_DEBUG("unsupported depth, assuming 24 bits\n"); + bpc = min((unsigned int)8, display_bpc); + break; + } + + DRM_DEBUG_DRIVER("setting pipe bpc to %d (max display bpc %d)\n", + bpc, display_bpc); + + *pipe_bpp = bpc * 3; + + return display_bpc != bpc; +} + static int i9xx_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode, @@ -4687,6 +4975,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, I915_WRITE(DSPCNTR(plane), dspcntr); POSTING_READ(DSPCNTR(plane)); + intel_enable_plane(dev_priv, plane, pipe); ret = intel_pipe_set_base(crtc, x, y, old_fb); @@ -4719,7 +5008,9 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, struct fdi_m_n m_n = {0}; u32 temp; u32 lvds_sync = 0; - int target_clock, pixel_multiplier, lane, link_bw, bpp, factor; + int target_clock, pixel_multiplier, lane, link_bw, factor; + unsigned int pipe_bpp; + bool dither; list_for_each_entry(encoder, &mode_config->encoder_list, base.head) { if (encoder->base.crtc != crtc) @@ -4846,56 +5137,37 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, /* determine panel color depth */ temp = I915_READ(PIPECONF(pipe)); temp &= ~PIPE_BPC_MASK; - if (is_lvds) { - /* the BPC will be 6 if it is 18-bit LVDS panel */ - if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP) - temp |= PIPE_8BPC; - else - temp |= PIPE_6BPC; - } else if (has_edp_encoder) { - switch (dev_priv->edp.bpp/3) { - case 8: - temp |= PIPE_8BPC; - break; - case 10: - temp |= PIPE_10BPC; - break; - case 6: - temp |= PIPE_6BPC; - break; - case 12: - temp |= PIPE_12BPC; - break; - } - } else - temp |= PIPE_8BPC; - I915_WRITE(PIPECONF(pipe), temp); - - switch (temp & PIPE_BPC_MASK) { - case PIPE_8BPC: - bpp = 24; + dither = intel_choose_pipe_bpp_dither(crtc, &pipe_bpp); + switch (pipe_bpp) { + case 18: + temp |= PIPE_6BPC; break; - case PIPE_10BPC: - bpp = 30; + case 24: + temp |= PIPE_8BPC; break; - case PIPE_6BPC: - bpp = 18; + case 30: + temp |= PIPE_10BPC; break; - case PIPE_12BPC: - bpp = 36; + case 36: + temp |= PIPE_12BPC; break; default: - DRM_ERROR("unknown pipe bpc value\n"); - bpp = 24; + WARN(1, "intel_choose_pipe_bpp returned invalid value\n"); + temp |= PIPE_8BPC; + pipe_bpp = 24; + break; } + intel_crtc->bpp = pipe_bpp; + I915_WRITE(PIPECONF(pipe), temp); + if (!lane) { /* * Account for spread spectrum to avoid * oversubscribing the link. Max center spread * is 2.5%; use 5% for safety's sake. */ - u32 bps = target_clock * bpp * 21 / 20; + u32 bps = target_clock * intel_crtc->bpp * 21 / 20; lane = bps / (link_bw * 8) + 1; } @@ -4903,7 +5175,8 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, if (pixel_multiplier > 1) link_bw *= pixel_multiplier; - ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n); + ironlake_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw, + &m_n); /* Ironlake: try to setup display ref clock before DPLL * enabling. This is only under driver's control after @@ -5106,14 +5379,12 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, I915_WRITE(PCH_LVDS, temp); } - /* set the dithering flag and clear for anything other than a panel. */ pipeconf &= ~PIPECONF_DITHER_EN; pipeconf &= ~PIPECONF_DITHER_TYPE_MASK; - if (dev_priv->lvds_dither && (is_lvds || has_edp_encoder)) { + if ((is_lvds && dev_priv->lvds_dither) || dither) { pipeconf |= PIPECONF_DITHER_EN; pipeconf |= PIPECONF_DITHER_TYPE_ST1; } - if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) { intel_dp_set_m_n(crtc, mode, adjusted_mode); } else { @@ -5217,8 +5488,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, I915_WRITE(DSPCNTR(plane), dspcntr); POSTING_READ(DSPCNTR(plane)); - if (!HAS_PCH_SPLIT(dev)) - intel_enable_plane(dev_priv, plane, pipe); ret = intel_pipe_set_base(crtc, x, y, old_fb); @@ -5435,21 +5704,15 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, goto fail_locked; } - ret = i915_gem_object_pin(obj, PAGE_SIZE, true); - if (ret) { - DRM_ERROR("failed to pin cursor bo\n"); - goto fail_locked; - } - - ret = i915_gem_object_set_to_gtt_domain(obj, 0); + ret = i915_gem_object_pin_to_display_plane(obj, 0, NULL); if (ret) { DRM_ERROR("failed to move cursor bo into the GTT\n"); - goto fail_unpin; + goto fail_locked; } ret = i915_gem_object_put_fence(obj); if (ret) { - DRM_ERROR("failed to move cursor bo into the GTT\n"); + DRM_ERROR("failed to release fence for cursor"); goto fail_unpin; } @@ -6152,6 +6415,7 @@ static void intel_unpin_work_fn(struct work_struct *__work) drm_gem_object_unreference(&work->pending_flip_obj->base); drm_gem_object_unreference(&work->old_fb_obj->base); + intel_update_fbc(work->dev); mutex_unlock(&work->dev->struct_mutex); kfree(work); } @@ -6262,6 +6526,197 @@ void intel_prepare_page_flip(struct drm_device *dev, int plane) spin_unlock_irqrestore(&dev->event_lock, flags); } +static int intel_gen2_queue_flip(struct drm_device *dev, + struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_i915_gem_object *obj) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + unsigned long offset; + u32 flip_mask; + int ret; + + ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv)); + if (ret) + goto out; + + /* Offset into the new buffer for cases of shared fbs between CRTCs */ + offset = crtc->y * fb->pitch + crtc->x * fb->bits_per_pixel/8; + + ret = BEGIN_LP_RING(6); + if (ret) + goto out; + + /* Can't queue multiple flips, so wait for the previous + * one to finish before executing the next. + */ + if (intel_crtc->plane) + flip_mask = MI_WAIT_FOR_PLANE_B_FLIP; + else + flip_mask = MI_WAIT_FOR_PLANE_A_FLIP; + OUT_RING(MI_WAIT_FOR_EVENT | flip_mask); + OUT_RING(MI_NOOP); + OUT_RING(MI_DISPLAY_FLIP | + MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); + OUT_RING(fb->pitch); + OUT_RING(obj->gtt_offset + offset); + OUT_RING(MI_NOOP); + ADVANCE_LP_RING(); +out: + return ret; +} + +static int intel_gen3_queue_flip(struct drm_device *dev, + struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_i915_gem_object *obj) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + unsigned long offset; + u32 flip_mask; + int ret; + + ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv)); + if (ret) + goto out; + + /* Offset into the new buffer for cases of shared fbs between CRTCs */ + offset = crtc->y * fb->pitch + crtc->x * fb->bits_per_pixel/8; + + ret = BEGIN_LP_RING(6); + if (ret) + goto out; + + if (intel_crtc->plane) + flip_mask = MI_WAIT_FOR_PLANE_B_FLIP; + else + flip_mask = MI_WAIT_FOR_PLANE_A_FLIP; + OUT_RING(MI_WAIT_FOR_EVENT | flip_mask); + OUT_RING(MI_NOOP); + OUT_RING(MI_DISPLAY_FLIP_I915 | + MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); + OUT_RING(fb->pitch); + OUT_RING(obj->gtt_offset + offset); + OUT_RING(MI_NOOP); + + ADVANCE_LP_RING(); +out: + return ret; +} + +static int intel_gen4_queue_flip(struct drm_device *dev, + struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_i915_gem_object *obj) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + uint32_t pf, pipesrc; + int ret; + + ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv)); + if (ret) + goto out; + + ret = BEGIN_LP_RING(4); + if (ret) + goto out; + + /* i965+ uses the linear or tiled offsets from the + * Display Registers (which do not change across a page-flip) + * so we need only reprogram the base address. + */ + OUT_RING(MI_DISPLAY_FLIP | + MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); + OUT_RING(fb->pitch); + OUT_RING(obj->gtt_offset | obj->tiling_mode); + + /* XXX Enabling the panel-fitter across page-flip is so far + * untested on non-native modes, so ignore it for now. + * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE; + */ + pf = 0; + pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff; + OUT_RING(pf | pipesrc); + ADVANCE_LP_RING(); +out: + return ret; +} + +static int intel_gen6_queue_flip(struct drm_device *dev, + struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_i915_gem_object *obj) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + uint32_t pf, pipesrc; + int ret; + + ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv)); + if (ret) + goto out; + + ret = BEGIN_LP_RING(4); + if (ret) + goto out; + + OUT_RING(MI_DISPLAY_FLIP | + MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); + OUT_RING(fb->pitch | obj->tiling_mode); + OUT_RING(obj->gtt_offset); + + pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE; + pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff; + OUT_RING(pf | pipesrc); + ADVANCE_LP_RING(); +out: + return ret; +} + +/* + * On gen7 we currently use the blit ring because (in early silicon at least) + * the render ring doesn't give us interrpts for page flip completion, which + * means clients will hang after the first flip is queued. Fortunately the + * blit ring generates interrupts properly, so use it instead. + */ +static int intel_gen7_queue_flip(struct drm_device *dev, + struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_i915_gem_object *obj) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_ring_buffer *ring = &dev_priv->ring[BCS]; + int ret; + + ret = intel_pin_and_fence_fb_obj(dev, obj, ring); + if (ret) + goto out; + + ret = intel_ring_begin(ring, 4); + if (ret) + goto out; + + intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | (intel_crtc->plane << 19)); + intel_ring_emit(ring, (fb->pitch | obj->tiling_mode)); + intel_ring_emit(ring, (obj->gtt_offset)); + intel_ring_emit(ring, (MI_NOOP)); + intel_ring_advance(ring); +out: + return ret; +} + +static int intel_default_queue_flip(struct drm_device *dev, + struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_i915_gem_object *obj) +{ + return -ENODEV; +} + static int intel_crtc_page_flip(struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_pending_vblank_event *event) @@ -6272,9 +6727,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, struct drm_i915_gem_object *obj; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_unpin_work *work; - unsigned long flags, offset; - int pipe = intel_crtc->pipe; - u32 pf, pipesrc; + unsigned long flags; int ret; work = kzalloc(sizeof *work, GFP_KERNEL); @@ -6303,9 +6756,6 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, obj = intel_fb->obj; mutex_lock(&dev->struct_mutex); - ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv)); - if (ret) - goto cleanup_work; /* Reference the objects for the scheduled work. */ drm_gem_object_reference(&work->old_fb_obj->base); @@ -6317,102 +6767,31 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, if (ret) goto cleanup_objs; - if (IS_GEN3(dev) || IS_GEN2(dev)) { - u32 flip_mask; - - /* Can't queue multiple flips, so wait for the previous - * one to finish before executing the next. - */ - ret = BEGIN_LP_RING(2); - if (ret) - goto cleanup_objs; - - if (intel_crtc->plane) - flip_mask = MI_WAIT_FOR_PLANE_B_FLIP; - else - flip_mask = MI_WAIT_FOR_PLANE_A_FLIP; - OUT_RING(MI_WAIT_FOR_EVENT | flip_mask); - OUT_RING(MI_NOOP); - ADVANCE_LP_RING(); - } - work->pending_flip_obj = obj; work->enable_stall_check = true; - /* Offset into the new buffer for cases of shared fbs between CRTCs */ - offset = crtc->y * fb->pitch + crtc->x * fb->bits_per_pixel/8; - - ret = BEGIN_LP_RING(4); - if (ret) - goto cleanup_objs; - /* Block clients from rendering to the new back buffer until * the flip occurs and the object is no longer visible. */ atomic_add(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip); - switch (INTEL_INFO(dev)->gen) { - case 2: - OUT_RING(MI_DISPLAY_FLIP | - MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); - OUT_RING(fb->pitch); - OUT_RING(obj->gtt_offset + offset); - OUT_RING(MI_NOOP); - break; - - case 3: - OUT_RING(MI_DISPLAY_FLIP_I915 | - MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); - OUT_RING(fb->pitch); - OUT_RING(obj->gtt_offset + offset); - OUT_RING(MI_NOOP); - break; - - case 4: - case 5: - /* i965+ uses the linear or tiled offsets from the - * Display Registers (which do not change across a page-flip) - * so we need only reprogram the base address. - */ - OUT_RING(MI_DISPLAY_FLIP | - MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); - OUT_RING(fb->pitch); - OUT_RING(obj->gtt_offset | obj->tiling_mode); - - /* XXX Enabling the panel-fitter across page-flip is so far - * untested on non-native modes, so ignore it for now. - * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE; - */ - pf = 0; - pipesrc = I915_READ(PIPESRC(pipe)) & 0x0fff0fff; - OUT_RING(pf | pipesrc); - break; - - case 6: - case 7: - OUT_RING(MI_DISPLAY_FLIP | - MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); - OUT_RING(fb->pitch | obj->tiling_mode); - OUT_RING(obj->gtt_offset); - - pf = I915_READ(PF_CTL(pipe)) & PF_ENABLE; - pipesrc = I915_READ(PIPESRC(pipe)) & 0x0fff0fff; - OUT_RING(pf | pipesrc); - break; - } - ADVANCE_LP_RING(); + ret = dev_priv->display.queue_flip(dev, crtc, fb, obj); + if (ret) + goto cleanup_pending; + intel_disable_fbc(dev); mutex_unlock(&dev->struct_mutex); trace_i915_flip_request(intel_crtc->plane, obj); return 0; +cleanup_pending: + atomic_sub(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip); cleanup_objs: drm_gem_object_unreference(&work->old_fb_obj->base); drm_gem_object_unreference(&obj->base); -cleanup_work: mutex_unlock(&dev->struct_mutex); spin_lock_irqsave(&dev->event_lock, flags); @@ -6530,6 +6909,7 @@ static void intel_crtc_init(struct drm_device *dev, int pipe) intel_crtc_reset(&intel_crtc->base); intel_crtc->active = true; /* force the pipe off on setup_init_config */ + intel_crtc->bpp = 24; /* default for pre-Ironlake */ if (HAS_PCH_SPLIT(dev)) { intel_helper_funcs.prepare = ironlake_crtc_prepare; @@ -6756,6 +7136,11 @@ int intel_framebuffer_init(struct drm_device *dev, switch (mode_cmd->bpp) { case 8: case 16: + /* Only pre-ILK can handle 5:5:5 */ + if (mode_cmd->depth == 15 && !HAS_PCH_SPLIT(dev)) + return -EINVAL; + break; + case 24: case 32: break; @@ -7170,6 +7555,59 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv) mutex_unlock(&dev_priv->dev->struct_mutex); } +void gen6_update_ring_freq(struct drm_i915_private *dev_priv) +{ + int min_freq = 15; + int gpu_freq, ia_freq, max_ia_freq; + int scaling_factor = 180; + + max_ia_freq = cpufreq_quick_get_max(0); + /* + * Default to measured freq if none found, PCU will ensure we don't go + * over + */ + if (!max_ia_freq) + max_ia_freq = tsc_khz; + + /* Convert from kHz to MHz */ + max_ia_freq /= 1000; + + mutex_lock(&dev_priv->dev->struct_mutex); + + /* + * For each potential GPU frequency, load a ring frequency we'd like + * to use for memory access. We do this by specifying the IA frequency + * the PCU should use as a reference to determine the ring frequency. + */ + for (gpu_freq = dev_priv->max_delay; gpu_freq >= dev_priv->min_delay; + gpu_freq--) { + int diff = dev_priv->max_delay - gpu_freq; + + /* + * For GPU frequencies less than 750MHz, just use the lowest + * ring freq. + */ + if (gpu_freq < min_freq) + ia_freq = 800; + else + ia_freq = max_ia_freq - ((diff * scaling_factor) / 2); + ia_freq = DIV_ROUND_CLOSEST(ia_freq, 100); + + I915_WRITE(GEN6_PCODE_DATA, + (ia_freq << GEN6_PCODE_FREQ_IA_RATIO_SHIFT) | + gpu_freq); + I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY | + GEN6_PCODE_WRITE_MIN_FREQ_TABLE); + if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & + GEN6_PCODE_READY) == 0, 10)) { + DRM_ERROR("pcode write of freq table timed out\n"); + continue; + } + } + + mutex_unlock(&dev_priv->dev->struct_mutex); +} + static void ironlake_init_clock_gating(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -7526,9 +7964,11 @@ static void intel_init_display(struct drm_device *dev) if (HAS_PCH_SPLIT(dev)) { dev_priv->display.dpms = ironlake_crtc_dpms; dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set; + dev_priv->display.update_plane = ironlake_update_plane; } else { dev_priv->display.dpms = i9xx_crtc_dpms; dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set; + dev_priv->display.update_plane = i9xx_update_plane; } if (I915_HAS_FBC(dev)) { @@ -7657,6 +8097,31 @@ static void intel_init_display(struct drm_device *dev) else dev_priv->display.get_fifo_size = i830_get_fifo_size; } + + /* Default just returns -ENODEV to indicate unsupported */ + dev_priv->display.queue_flip = intel_default_queue_flip; + + switch (INTEL_INFO(dev)->gen) { + case 2: + dev_priv->display.queue_flip = intel_gen2_queue_flip; + break; + + case 3: + dev_priv->display.queue_flip = intel_gen3_queue_flip; + break; + + case 4: + case 5: + dev_priv->display.queue_flip = intel_gen4_queue_flip; + break; + + case 6: + dev_priv->display.queue_flip = intel_gen6_queue_flip; + break; + case 7: + dev_priv->display.queue_flip = intel_gen7_queue_flip; + break; + } } /* @@ -7788,8 +8253,10 @@ void intel_modeset_init(struct drm_device *dev) intel_init_emon(dev); } - if (IS_GEN6(dev)) + if (IS_GEN6(dev) || IS_GEN7(dev)) { gen6_enable_rps(dev_priv); + gen6_update_ring_freq(dev_priv); + } INIT_WORK(&dev_priv->idle_work, intel_idle_update); setup_timer(&dev_priv->idle_timer, intel_gpu_idle_timer, @@ -7825,12 +8292,11 @@ void intel_modeset_cleanup(struct drm_device *dev) intel_increase_pllclock(crtc); } - if (dev_priv->display.disable_fbc) - dev_priv->display.disable_fbc(dev); + intel_disable_fbc(dev); if (IS_IRONLAKE_M(dev)) ironlake_disable_drps(dev); - if (IS_GEN6(dev)) + if (IS_GEN6(dev) || IS_GEN7(dev)) gen6_disable_rps(dev); if (IS_IRONLAKE_M(dev)) @@ -7843,6 +8309,9 @@ void intel_modeset_cleanup(struct drm_device *dev) drm_irq_uninstall(dev); cancel_work_sync(&dev_priv->hotplug_work); + /* flush any delayed tasks or pending work */ + flush_scheduled_work(); + /* Shut off idle work before the crtcs get freed. */ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { intel_crtc = to_intel_crtc(crtc); diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 391b55f1cc74..f797fb58ba9c 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -50,7 +50,6 @@ struct intel_dp { bool has_audio; int force_audio; uint32_t color_range; - int dpms_mode; uint8_t link_bw; uint8_t lane_count; uint8_t dpcd[4]; @@ -138,8 +137,8 @@ intel_dp_max_lane_count(struct intel_dp *intel_dp) { int max_lane_count = 4; - if (intel_dp->dpcd[0] >= 0x11) { - max_lane_count = intel_dp->dpcd[2] & 0x1f; + if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) { + max_lane_count = intel_dp->dpcd[DP_MAX_LANE_COUNT] & 0x1f; switch (max_lane_count) { case 1: case 2: case 4: break; @@ -153,7 +152,7 @@ intel_dp_max_lane_count(struct intel_dp *intel_dp) static int intel_dp_max_link_bw(struct intel_dp *intel_dp) { - int max_link_bw = intel_dp->dpcd[1]; + int max_link_bw = intel_dp->dpcd[DP_MAX_LINK_RATE]; switch (max_link_bw) { case DP_LINK_BW_1_62: @@ -179,12 +178,14 @@ intel_dp_link_clock(uint8_t link_bw) static int intel_dp_link_required(struct drm_device *dev, struct intel_dp *intel_dp, int pixel_clock) { - struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_crtc *crtc = intel_dp->base.base.crtc; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int bpp = 24; - if (is_edp(intel_dp)) - return (pixel_clock * dev_priv->edp.bpp + 7) / 8; - else - return pixel_clock * 3; + if (intel_crtc) + bpp = intel_crtc->bpp; + + return (pixel_clock * bpp + 7) / 8; } static int @@ -682,7 +683,7 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_encoder *encoder; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - int lane_count = 4, bpp = 24; + int lane_count = 4; struct intel_dp_m_n m_n; int pipe = intel_crtc->pipe; @@ -701,7 +702,6 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, break; } else if (is_edp(intel_dp)) { lane_count = dev_priv->edp.lanes; - bpp = dev_priv->edp.bpp; break; } } @@ -711,7 +711,7 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, * the number of bytes_per_pixel post-LUT, which we always * set up for 8-bits of R/G/B, or 3 bytes total. */ - intel_dp_compute_m_n(bpp, lane_count, + intel_dp_compute_m_n(intel_crtc->bpp, lane_count, mode->clock, adjusted_mode->clock, &m_n); if (HAS_PCH_SPLIT(dev)) { @@ -774,7 +774,8 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, /* * Check for DPCD version > 1.1 and enhanced framing support */ - if (intel_dp->dpcd[0] >= 0x11 && (intel_dp->dpcd[2] & DP_ENHANCED_FRAME_CAP)) { + if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 && + (intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP)) { intel_dp->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN; intel_dp->DP |= DP_ENHANCED_FRAMING; } @@ -942,11 +943,44 @@ static void ironlake_edp_pll_off(struct drm_encoder *encoder) udelay(200); } +/* If the sink supports it, try to set the power state appropriately */ +static void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode) +{ + int ret, i; + + /* Should have a valid DPCD by this point */ + if (intel_dp->dpcd[DP_DPCD_REV] < 0x11) + return; + + if (mode != DRM_MODE_DPMS_ON) { + ret = intel_dp_aux_native_write_1(intel_dp, DP_SET_POWER, + DP_SET_POWER_D3); + if (ret != 1) + DRM_DEBUG_DRIVER("failed to write sink power state\n"); + } else { + /* + * When turning on, we need to retry for 1ms to give the sink + * time to wake up. + */ + for (i = 0; i < 3; i++) { + ret = intel_dp_aux_native_write_1(intel_dp, + DP_SET_POWER, + DP_SET_POWER_D0); + if (ret == 1) + break; + msleep(1); + } + } +} + static void intel_dp_prepare(struct drm_encoder *encoder) { struct intel_dp *intel_dp = enc_to_intel_dp(encoder); struct drm_device *dev = encoder->dev; + /* Wake up the sink first */ + intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); + if (is_edp(intel_dp)) { ironlake_edp_backlight_off(dev); ironlake_edp_panel_off(dev); @@ -990,6 +1024,7 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) if (mode != DRM_MODE_DPMS_ON) { if (is_edp(intel_dp)) ironlake_edp_backlight_off(dev); + intel_dp_sink_dpms(intel_dp, mode); intel_dp_link_down(intel_dp); if (is_edp(intel_dp)) ironlake_edp_panel_off(dev); @@ -998,6 +1033,7 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) } else { if (is_edp(intel_dp)) ironlake_edp_panel_vdd_on(intel_dp); + intel_dp_sink_dpms(intel_dp, mode); if (!(dp_reg & DP_PORT_EN)) { intel_dp_start_link_train(intel_dp); if (is_edp(intel_dp)) { @@ -1009,7 +1045,31 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) if (is_edp(intel_dp)) ironlake_edp_backlight_on(dev); } - intel_dp->dpms_mode = mode; +} + +/* + * Native read with retry for link status and receiver capability reads for + * cases where the sink may still be asleep. + */ +static bool +intel_dp_aux_native_read_retry(struct intel_dp *intel_dp, uint16_t address, + uint8_t *recv, int recv_bytes) +{ + int ret, i; + + /* + * Sinks are *supposed* to come up within 1ms from an off state, + * but we're also supposed to retry 3 times per the spec. + */ + for (i = 0; i < 3; i++) { + ret = intel_dp_aux_native_read(intel_dp, address, recv, + recv_bytes); + if (ret == recv_bytes) + return true; + msleep(1); + } + + return false; } /* @@ -1019,14 +1079,10 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode) static bool intel_dp_get_link_status(struct intel_dp *intel_dp) { - int ret; - - ret = intel_dp_aux_native_read(intel_dp, - DP_LANE0_1_STATUS, - intel_dp->link_status, DP_LINK_STATUS_SIZE); - if (ret != DP_LINK_STATUS_SIZE) - return false; - return true; + return intel_dp_aux_native_read_retry(intel_dp, + DP_LANE0_1_STATUS, + intel_dp->link_status, + DP_LINK_STATUS_SIZE); } static uint8_t @@ -1515,6 +1571,8 @@ intel_dp_link_down(struct intel_dp *intel_dp) static void intel_dp_check_link_status(struct intel_dp *intel_dp) { + int ret; + if (!intel_dp->base.base.crtc) return; @@ -1523,6 +1581,15 @@ intel_dp_check_link_status(struct intel_dp *intel_dp) return; } + /* Try to read receiver status if the link appears to be up */ + ret = intel_dp_aux_native_read(intel_dp, + 0x000, intel_dp->dpcd, + sizeof (intel_dp->dpcd)); + if (ret != sizeof(intel_dp->dpcd)) { + intel_dp_link_down(intel_dp); + return; + } + if (!intel_channel_eq_ok(intel_dp)) { intel_dp_start_link_train(intel_dp); intel_dp_complete_link_train(intel_dp); @@ -1533,6 +1600,7 @@ static enum drm_connector_status ironlake_dp_detect(struct intel_dp *intel_dp) { enum drm_connector_status status; + bool ret; /* Can't disconnect eDP, but you can close the lid... */ if (is_edp(intel_dp)) { @@ -1543,13 +1611,11 @@ ironlake_dp_detect(struct intel_dp *intel_dp) } status = connector_status_disconnected; - if (intel_dp_aux_native_read(intel_dp, - 0x000, intel_dp->dpcd, - sizeof (intel_dp->dpcd)) - == sizeof(intel_dp->dpcd)) { - if (intel_dp->dpcd[0] != 0) - status = connector_status_connected; - } + ret = intel_dp_aux_native_read_retry(intel_dp, + 0x000, intel_dp->dpcd, + sizeof (intel_dp->dpcd)); + if (ret && intel_dp->dpcd[DP_DPCD_REV] != 0) + status = connector_status_connected; DRM_DEBUG_KMS("DPCD: %hx%hx%hx%hx\n", intel_dp->dpcd[0], intel_dp->dpcd[1], intel_dp->dpcd[2], intel_dp->dpcd[3]); return status; @@ -1586,7 +1652,7 @@ g4x_dp_detect(struct intel_dp *intel_dp) if (intel_dp_aux_native_read(intel_dp, 0x000, intel_dp->dpcd, sizeof (intel_dp->dpcd)) == sizeof (intel_dp->dpcd)) { - if (intel_dp->dpcd[0] != 0) + if (intel_dp->dpcd[DP_DPCD_REV] != 0) status = connector_status_connected; } @@ -1790,8 +1856,7 @@ intel_dp_hot_plug(struct intel_encoder *intel_encoder) { struct intel_dp *intel_dp = container_of(intel_encoder, struct intel_dp, base); - if (intel_dp->dpms_mode == DRM_MODE_DPMS_ON) - intel_dp_check_link_status(intel_dp); + intel_dp_check_link_status(intel_dp); } /* Return which DP Port should be selected for Transcoder DP control */ @@ -1859,7 +1924,6 @@ intel_dp_init(struct drm_device *dev, int output_reg) return; intel_dp->output_reg = output_reg; - intel_dp->dpms_mode = -1; intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL); if (!intel_connector) { @@ -1954,8 +2018,9 @@ intel_dp_init(struct drm_device *dev, int output_reg) sizeof(intel_dp->dpcd)); ironlake_edp_panel_vdd_off(intel_dp); if (ret == sizeof(intel_dp->dpcd)) { - if (intel_dp->dpcd[0] >= 0x11) - dev_priv->no_aux_handshake = intel_dp->dpcd[3] & + if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) + dev_priv->no_aux_handshake = + intel_dp->dpcd[DP_MAX_DOWNSPREAD] & DP_NO_AUX_HANDSHAKE_LINK_TRAINING; } else { /* if this fails, presume the device is a ghost */ diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 9ffa61eb4d7e..6e990f9760ef 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -170,6 +170,7 @@ struct intel_crtc { int16_t cursor_x, cursor_y; int16_t cursor_width, cursor_height; bool cursor_visible; + unsigned int bpp; }; #define to_intel_crtc(x) container_of(x, struct intel_crtc, base) @@ -233,6 +234,13 @@ struct intel_unpin_work { bool enable_stall_check; }; +struct intel_fbc_work { + struct delayed_work work; + struct drm_crtc *crtc; + struct drm_framebuffer *fb; + int interval; +}; + int intel_ddc_get_modes(struct drm_connector *c, struct i2c_adapter *adapter); extern bool intel_ddc_probe(struct intel_encoder *intel_encoder, int ddc_bus); @@ -317,6 +325,7 @@ extern void intel_enable_clock_gating(struct drm_device *dev); extern void ironlake_enable_drps(struct drm_device *dev); extern void ironlake_disable_drps(struct drm_device *dev); extern void gen6_enable_rps(struct drm_i915_private *dev_priv); +extern void gen6_update_ring_freq(struct drm_i915_private *dev_priv); extern void gen6_disable_rps(struct drm_device *dev); extern void intel_init_emon(struct drm_device *dev); diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index aa0a8e83142e..1ed8e6903915 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -124,12 +124,18 @@ static void intel_hdmi_mode_set(struct drm_encoder *encoder, u32 sdvox; sdvox = SDVO_ENCODING_HDMI | SDVO_BORDER_ENABLE; - sdvox |= intel_hdmi->color_range; + if (!HAS_PCH_SPLIT(dev)) + sdvox |= intel_hdmi->color_range; if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) sdvox |= SDVO_VSYNC_ACTIVE_HIGH; if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) sdvox |= SDVO_HSYNC_ACTIVE_HIGH; + if (intel_crtc->bpp > 24) + sdvox |= COLOR_FORMAT_12bpc; + else + sdvox |= COLOR_FORMAT_8bpc; + /* Required on CPT */ if (intel_hdmi->has_hdmi_sink && HAS_PCH_CPT(dev)) sdvox |= HDMI_MODE_SELECT; diff --git a/drivers/gpu/drm/i915/intel_opregion.c b/drivers/gpu/drm/i915/intel_opregion.c index d2c710422908..b7c5ddb564d1 100644 --- a/drivers/gpu/drm/i915/intel_opregion.c +++ b/drivers/gpu/drm/i915/intel_opregion.c @@ -297,19 +297,26 @@ static int intel_opregion_video_event(struct notifier_block *nb, /* The only video events relevant to opregion are 0x80. These indicate either a docking event, lid switch or display switch request. In Linux, these are handled by the dock, button and video drivers. - We might want to fix the video driver to be opregion-aware in - future, but right now we just indicate to the firmware that the - request has been handled */ + */ struct opregion_acpi *acpi; + struct acpi_bus_event *event = data; + int ret = NOTIFY_OK; + + if (strcmp(event->device_class, ACPI_VIDEO_CLASS) != 0) + return NOTIFY_DONE; if (!system_opregion) return NOTIFY_DONE; acpi = system_opregion->acpi; + + if (event->type == 0x80 && !(acpi->cevt & 0x1)) + ret = NOTIFY_BAD; + acpi->csts = 0; - return NOTIFY_OK; + return ret; } static struct notifier_block intel_opregion_notifier = { diff --git a/drivers/gpu/drm/i915/intel_overlay.c b/drivers/gpu/drm/i915/intel_overlay.c index a670c006982e..d36038086826 100644 --- a/drivers/gpu/drm/i915/intel_overlay.c +++ b/drivers/gpu/drm/i915/intel_overlay.c @@ -773,14 +773,10 @@ static int intel_overlay_do_put_image(struct intel_overlay *overlay, if (ret != 0) return ret; - ret = i915_gem_object_pin(new_bo, PAGE_SIZE, true); + ret = i915_gem_object_pin_to_display_plane(new_bo, 0, NULL); if (ret != 0) return ret; - ret = i915_gem_object_set_to_gtt_domain(new_bo, 0); - if (ret != 0) - goto out_unpin; - ret = i915_gem_object_put_fence(new_bo); if (ret) goto out_unpin; @@ -1409,6 +1405,11 @@ void intel_setup_overlay(struct drm_device *dev) overlay = kzalloc(sizeof(struct intel_overlay), GFP_KERNEL); if (!overlay) return; + + mutex_lock(&dev->struct_mutex); + if (WARN_ON(dev_priv->overlay)) + goto out_free; + overlay->dev = dev; reg_bo = i915_gem_alloc_object(dev, PAGE_SIZE); @@ -1448,7 +1449,7 @@ void intel_setup_overlay(struct drm_device *dev) regs = intel_overlay_map_regs(overlay); if (!regs) - goto out_free_bo; + goto out_unpin_bo; memset(regs, 0, sizeof(struct overlay_registers)); update_polyphase_filter(regs); @@ -1457,14 +1458,17 @@ void intel_setup_overlay(struct drm_device *dev) intel_overlay_unmap_regs(overlay, regs); dev_priv->overlay = overlay; + mutex_unlock(&dev->struct_mutex); DRM_INFO("initialized overlay support\n"); return; out_unpin_bo: - i915_gem_object_unpin(reg_bo); + if (!OVERLAY_NEEDS_PHYSICAL(dev)) + i915_gem_object_unpin(reg_bo); out_free_bo: drm_gem_object_unreference(®_bo->base); out_free: + mutex_unlock(&dev->struct_mutex); kfree(overlay); return; } diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 95c4b1429935..e9615685a39c 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -236,7 +236,8 @@ init_pipe_control(struct intel_ring_buffer *ring) ret = -ENOMEM; goto err; } - obj->cache_level = I915_CACHE_LLC; + + i915_gem_object_set_cache_level(obj, I915_CACHE_LLC); ret = i915_gem_object_pin(obj, 4096, true); if (ret) @@ -776,7 +777,8 @@ static int init_status_page(struct intel_ring_buffer *ring) ret = -ENOMEM; goto err; } - obj->cache_level = I915_CACHE_LLC; + + i915_gem_object_set_cache_level(obj, I915_CACHE_LLC); ret = i915_gem_object_pin(obj, 4096, true); if (ret != 0) { diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h index c0e0ee63fbf4..39ac2b634ae5 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.h +++ b/drivers/gpu/drm/i915/intel_ringbuffer.h @@ -165,7 +165,7 @@ void intel_cleanup_ring_buffer(struct intel_ring_buffer *ring); int __must_check intel_wait_ring_buffer(struct intel_ring_buffer *ring, int n); static inline int intel_wait_ring_idle(struct intel_ring_buffer *ring) { - return intel_wait_ring_buffer(ring, ring->space - 8); + return intel_wait_ring_buffer(ring, ring->size - 8); } int __must_check intel_ring_begin(struct intel_ring_buffer *ring, int n); diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c index 113e4e7264cd..210d570fd516 100644 --- a/drivers/gpu/drm/i915/intel_tv.c +++ b/drivers/gpu/drm/i915/intel_tv.c @@ -1236,6 +1236,8 @@ intel_tv_detect_type (struct intel_tv *intel_tv, struct drm_connector *connector) { struct drm_encoder *encoder = &intel_tv->base.base; + struct drm_crtc *crtc = encoder->crtc; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = dev->dev_private; unsigned long irqflags; @@ -1258,6 +1260,10 @@ intel_tv_detect_type (struct intel_tv *intel_tv, /* Poll for TV detection */ tv_ctl &= ~(TV_ENC_ENABLE | TV_TEST_MODE_MASK); tv_ctl |= TV_TEST_MODE_MONITOR_DETECT; + if (intel_crtc->pipe == 1) + tv_ctl |= TV_ENC_PIPEB_SELECT; + else + tv_ctl &= ~TV_ENC_PIPEB_SELECT; tv_dac &= ~(TVDAC_SENSE_MASK | DAC_A_MASK | DAC_B_MASK | DAC_C_MASK); tv_dac |= (TVDAC_STATE_CHG_EN | @@ -1277,26 +1283,26 @@ intel_tv_detect_type (struct intel_tv *intel_tv, to_intel_crtc(intel_tv->base.base.crtc)->pipe); type = -1; - if (wait_for((tv_dac = I915_READ(TV_DAC)) & TVDAC_STATE_CHG, 20) == 0) { - DRM_DEBUG_KMS("TV detected: %x, %x\n", tv_ctl, tv_dac); - /* - * A B C - * 0 1 1 Composite - * 1 0 X svideo - * 0 0 0 Component - */ - if ((tv_dac & TVDAC_SENSE_MASK) == (TVDAC_B_SENSE | TVDAC_C_SENSE)) { - DRM_DEBUG_KMS("Detected Composite TV connection\n"); - type = DRM_MODE_CONNECTOR_Composite; - } else if ((tv_dac & (TVDAC_A_SENSE|TVDAC_B_SENSE)) == TVDAC_A_SENSE) { - DRM_DEBUG_KMS("Detected S-Video TV connection\n"); - type = DRM_MODE_CONNECTOR_SVIDEO; - } else if ((tv_dac & TVDAC_SENSE_MASK) == 0) { - DRM_DEBUG_KMS("Detected Component TV connection\n"); - type = DRM_MODE_CONNECTOR_Component; - } else { - DRM_DEBUG_KMS("Unrecognised TV connection\n"); - } + tv_dac = I915_READ(TV_DAC); + DRM_DEBUG_KMS("TV detected: %x, %x\n", tv_ctl, tv_dac); + /* + * A B C + * 0 1 1 Composite + * 1 0 X svideo + * 0 0 0 Component + */ + if ((tv_dac & TVDAC_SENSE_MASK) == (TVDAC_B_SENSE | TVDAC_C_SENSE)) { + DRM_DEBUG_KMS("Detected Composite TV connection\n"); + type = DRM_MODE_CONNECTOR_Composite; + } else if ((tv_dac & (TVDAC_A_SENSE|TVDAC_B_SENSE)) == TVDAC_A_SENSE) { + DRM_DEBUG_KMS("Detected S-Video TV connection\n"); + type = DRM_MODE_CONNECTOR_SVIDEO; + } else if ((tv_dac & TVDAC_SENSE_MASK) == 0) { + DRM_DEBUG_KMS("Detected Component TV connection\n"); + type = DRM_MODE_CONNECTOR_Component; + } else { + DRM_DEBUG_KMS("Unrecognised TV connection\n"); + type = -1; } I915_WRITE(TV_DAC, save_tv_dac & ~TVDAC_STATE_CHG_EN); diff --git a/drivers/gpu/drm/nouveau/nouveau_mem.c b/drivers/gpu/drm/nouveau/nouveau_mem.c index 81dadeb9debc..f9ae2fc3d6f1 100644 --- a/drivers/gpu/drm/nouveau/nouveau_mem.c +++ b/drivers/gpu/drm/nouveau/nouveau_mem.c @@ -397,7 +397,7 @@ nouveau_mem_vram_init(struct drm_device *dev) if (pci_dma_supported(dev->pdev, DMA_BIT_MASK(40))) dma_bits = 40; } else - if (0 && drm_pci_device_is_pcie(dev) && + if (0 && pci_is_pcie(dev->pdev) && dev_priv->chipset > 0x40 && dev_priv->chipset != 0x45) { if (pci_dma_supported(dev->pdev, DMA_BIT_MASK(39))) diff --git a/drivers/gpu/drm/nouveau/nouveau_sgdma.c b/drivers/gpu/drm/nouveau/nouveau_sgdma.c index 82fad914e648..c444cadbf849 100644 --- a/drivers/gpu/drm/nouveau/nouveau_sgdma.c +++ b/drivers/gpu/drm/nouveau/nouveau_sgdma.c @@ -429,7 +429,7 @@ nouveau_sgdma_init(struct drm_device *dev) u32 aper_size, align; int ret; - if (dev_priv->card_type >= NV_40 && drm_pci_device_is_pcie(dev)) + if (dev_priv->card_type >= NV_40 && pci_is_pcie(dev->pdev)) aper_size = 512 * 1024 * 1024; else aper_size = 64 * 1024 * 1024; @@ -458,7 +458,7 @@ nouveau_sgdma_init(struct drm_device *dev) dev_priv->gart_info.type = NOUVEAU_GART_HW; dev_priv->gart_info.func = &nv50_sgdma_backend; } else - if (0 && drm_pci_device_is_pcie(dev) && + if (0 && pci_is_pcie(dev->pdev) && dev_priv->chipset > 0x40 && dev_priv->chipset != 0x45) { if (nv44_graph_class(dev)) { dev_priv->gart_info.func = &nv44_sgdma_backend; diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c index c7d87bc1e936..10656e430b44 100644 --- a/drivers/gpu/drm/nouveau/nouveau_state.c +++ b/drivers/gpu/drm/nouveau/nouveau_state.c @@ -377,7 +377,6 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev) engine->vram.flags_valid = nv50_vram_flags_valid; break; case 0xC0: - case 0xD0: engine->instmem.init = nvc0_instmem_init; engine->instmem.takedown = nvc0_instmem_takedown; engine->instmem.suspend = nvc0_instmem_suspend; @@ -986,7 +985,6 @@ int nouveau_load(struct drm_device *dev, unsigned long flags) dev_priv->card_type = NV_50; break; case 0xc0: - case 0xd0: dev_priv->card_type = NV_C0; break; default: @@ -1111,7 +1109,7 @@ int nouveau_ioctl_getparam(struct drm_device *dev, void *data, case NOUVEAU_GETPARAM_BUS_TYPE: if (drm_pci_device_is_agp(dev)) getparam->value = NV_AGP; - else if (drm_pci_device_is_pcie(dev)) + else if (pci_is_pcie(dev->pdev)) getparam->value = NV_PCIE; else getparam->value = NV_PCI; diff --git a/drivers/gpu/drm/nouveau/nv04_instmem.c b/drivers/gpu/drm/nouveau/nv04_instmem.c index e2075dec84a3..c1248e0740a3 100644 --- a/drivers/gpu/drm/nouveau/nv04_instmem.c +++ b/drivers/gpu/drm/nouveau/nv04_instmem.c @@ -42,7 +42,7 @@ int nv04_instmem_init(struct drm_device *dev) rsvd *= dev_priv->engine.fifo.channels; /* pciegart table */ - if (drm_pci_device_is_pcie(dev)) + if (pci_is_pcie(dev->pdev)) rsvd += 512 * 1024; /* object storage */ diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 445af7981637..55d04ee88c24 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -985,17 +985,19 @@ void evergreen_mc_stop(struct radeon_device *rdev, struct evergreen_mc_save *sav { save->vga_control[0] = RREG32(D1VGA_CONTROL); save->vga_control[1] = RREG32(D2VGA_CONTROL); - save->vga_control[2] = RREG32(EVERGREEN_D3VGA_CONTROL); - save->vga_control[3] = RREG32(EVERGREEN_D4VGA_CONTROL); - save->vga_control[4] = RREG32(EVERGREEN_D5VGA_CONTROL); - save->vga_control[5] = RREG32(EVERGREEN_D6VGA_CONTROL); save->vga_render_control = RREG32(VGA_RENDER_CONTROL); save->vga_hdp_control = RREG32(VGA_HDP_CONTROL); save->crtc_control[0] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET); save->crtc_control[1] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { + save->vga_control[2] = RREG32(EVERGREEN_D3VGA_CONTROL); + save->vga_control[3] = RREG32(EVERGREEN_D4VGA_CONTROL); save->crtc_control[2] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET); save->crtc_control[3] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET); + } + if (rdev->num_crtc >= 6) { + save->vga_control[4] = RREG32(EVERGREEN_D5VGA_CONTROL); + save->vga_control[5] = RREG32(EVERGREEN_D6VGA_CONTROL); save->crtc_control[4] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET); save->crtc_control[5] = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET); } @@ -1004,35 +1006,45 @@ void evergreen_mc_stop(struct radeon_device *rdev, struct evergreen_mc_save *sav WREG32(VGA_RENDER_CONTROL, 0); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC0_REGISTER_OFFSET, 1); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC1_REGISTER_OFFSET, 1); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC2_REGISTER_OFFSET, 1); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC3_REGISTER_OFFSET, 1); + } + if (rdev->num_crtc >= 6) { WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC4_REGISTER_OFFSET, 1); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC5_REGISTER_OFFSET, 1); } WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, 0); WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, 0); + } + if (rdev->num_crtc >= 6) { WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, 0); WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, 0); } WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC2_REGISTER_OFFSET, 0); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC3_REGISTER_OFFSET, 0); + } + if (rdev->num_crtc >= 6) { WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC4_REGISTER_OFFSET, 0); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC5_REGISTER_OFFSET, 0); } WREG32(D1VGA_CONTROL, 0); WREG32(D2VGA_CONTROL, 0); - WREG32(EVERGREEN_D3VGA_CONTROL, 0); - WREG32(EVERGREEN_D4VGA_CONTROL, 0); - WREG32(EVERGREEN_D5VGA_CONTROL, 0); - WREG32(EVERGREEN_D6VGA_CONTROL, 0); + if (rdev->num_crtc >= 4) { + WREG32(EVERGREEN_D3VGA_CONTROL, 0); + WREG32(EVERGREEN_D4VGA_CONTROL, 0); + } + if (rdev->num_crtc >= 6) { + WREG32(EVERGREEN_D5VGA_CONTROL, 0); + WREG32(EVERGREEN_D6VGA_CONTROL, 0); + } } void evergreen_mc_resume(struct radeon_device *rdev, struct evergreen_mc_save *save) @@ -1055,7 +1067,7 @@ void evergreen_mc_resume(struct radeon_device *rdev, struct evergreen_mc_save *s WREG32(EVERGREEN_GRPH_SECONDARY_SURFACE_ADDRESS + EVERGREEN_CRTC1_REGISTER_OFFSET, (u32)rdev->mc.vram_start); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { WREG32(EVERGREEN_GRPH_PRIMARY_SURFACE_ADDRESS_HIGH + EVERGREEN_CRTC2_REGISTER_OFFSET, upper_32_bits(rdev->mc.vram_start)); WREG32(EVERGREEN_GRPH_SECONDARY_SURFACE_ADDRESS_HIGH + EVERGREEN_CRTC2_REGISTER_OFFSET, @@ -1073,7 +1085,8 @@ void evergreen_mc_resume(struct radeon_device *rdev, struct evergreen_mc_save *s (u32)rdev->mc.vram_start); WREG32(EVERGREEN_GRPH_SECONDARY_SURFACE_ADDRESS + EVERGREEN_CRTC3_REGISTER_OFFSET, (u32)rdev->mc.vram_start); - + } + if (rdev->num_crtc >= 6) { WREG32(EVERGREEN_GRPH_PRIMARY_SURFACE_ADDRESS_HIGH + EVERGREEN_CRTC4_REGISTER_OFFSET, upper_32_bits(rdev->mc.vram_start)); WREG32(EVERGREEN_GRPH_SECONDARY_SURFACE_ADDRESS_HIGH + EVERGREEN_CRTC4_REGISTER_OFFSET, @@ -1101,31 +1114,41 @@ void evergreen_mc_resume(struct radeon_device *rdev, struct evergreen_mc_save *s /* Restore video state */ WREG32(D1VGA_CONTROL, save->vga_control[0]); WREG32(D2VGA_CONTROL, save->vga_control[1]); - WREG32(EVERGREEN_D3VGA_CONTROL, save->vga_control[2]); - WREG32(EVERGREEN_D4VGA_CONTROL, save->vga_control[3]); - WREG32(EVERGREEN_D5VGA_CONTROL, save->vga_control[4]); - WREG32(EVERGREEN_D6VGA_CONTROL, save->vga_control[5]); + if (rdev->num_crtc >= 4) { + WREG32(EVERGREEN_D3VGA_CONTROL, save->vga_control[2]); + WREG32(EVERGREEN_D4VGA_CONTROL, save->vga_control[3]); + } + if (rdev->num_crtc >= 6) { + WREG32(EVERGREEN_D5VGA_CONTROL, save->vga_control[4]); + WREG32(EVERGREEN_D6VGA_CONTROL, save->vga_control[5]); + } WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC0_REGISTER_OFFSET, 1); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC1_REGISTER_OFFSET, 1); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC2_REGISTER_OFFSET, 1); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC3_REGISTER_OFFSET, 1); + } + if (rdev->num_crtc >= 6) { WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC4_REGISTER_OFFSET, 1); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC5_REGISTER_OFFSET, 1); } WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, save->crtc_control[0]); WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, save->crtc_control[1]); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, save->crtc_control[2]); WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, save->crtc_control[3]); + } + if (rdev->num_crtc >= 6) { WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, save->crtc_control[4]); WREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, save->crtc_control[5]); } WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC2_REGISTER_OFFSET, 0); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC3_REGISTER_OFFSET, 0); + } + if (rdev->num_crtc >= 6) { WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC4_REGISTER_OFFSET, 0); WREG32(EVERGREEN_CRTC_UPDATE_LOCK + EVERGREEN_CRTC5_REGISTER_OFFSET, 0); } @@ -2013,9 +2036,9 @@ static void evergreen_gpu_init(struct radeon_device *rdev) rdev->config.evergreen.tile_config |= (3 << 0); break; } - /* num banks is 8 on all fusion asics */ + /* num banks is 8 on all fusion asics. 0 = 4, 1 = 8, 2 = 16 */ if (rdev->flags & RADEON_IS_IGP) - rdev->config.evergreen.tile_config |= 8 << 4; + rdev->config.evergreen.tile_config |= 1 << 4; else rdev->config.evergreen.tile_config |= ((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT) << 4; @@ -2024,6 +2047,7 @@ static void evergreen_gpu_init(struct radeon_device *rdev) rdev->config.evergreen.tile_config |= ((gb_addr_config & 0x30000000) >> 28) << 12; + rdev->config.evergreen.backend_map = gb_backend_map; WREG32(GB_BACKEND_MAP, gb_backend_map); WREG32(GB_ADDR_CONFIG, gb_addr_config); WREG32(DMIF_ADDR_CONFIG, gb_addr_config); @@ -2248,7 +2272,10 @@ int evergreen_mc_init(struct radeon_device *rdev) /* Get VRAM informations */ rdev->mc.vram_is_ddr = true; - tmp = RREG32(MC_ARB_RAMCFG); + if (rdev->flags & RADEON_IS_IGP) + tmp = RREG32(FUS_MC_ARB_RAMCFG); + else + tmp = RREG32(MC_ARB_RAMCFG); if (tmp & CHANSIZE_OVERRIDE) { chansize = 16; } else if (tmp & CHANSIZE_MASK) { @@ -2414,18 +2441,22 @@ void evergreen_disable_interrupt_state(struct radeon_device *rdev) WREG32(GRBM_INT_CNTL, 0); WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { WREG32(INT_MASK + EVERGREEN_CRTC2_REGISTER_OFFSET, 0); WREG32(INT_MASK + EVERGREEN_CRTC3_REGISTER_OFFSET, 0); + } + if (rdev->num_crtc >= 6) { WREG32(INT_MASK + EVERGREEN_CRTC4_REGISTER_OFFSET, 0); WREG32(INT_MASK + EVERGREEN_CRTC5_REGISTER_OFFSET, 0); } WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, 0); WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, 0); + } + if (rdev->num_crtc >= 6) { WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, 0); WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, 0); } @@ -2544,19 +2575,25 @@ int evergreen_irq_set(struct radeon_device *rdev) WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, crtc1); WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, crtc2); - if (!(rdev->flags & RADEON_IS_IGP)) { + if (rdev->num_crtc >= 4) { WREG32(INT_MASK + EVERGREEN_CRTC2_REGISTER_OFFSET, crtc3); WREG32(INT_MASK + EVERGREEN_CRTC3_REGISTER_OFFSET, crtc4); + } + if (rdev->num_crtc >= 6) { WREG32(INT_MASK + EVERGREEN_CRTC4_REGISTER_OFFSET, crtc5); WREG32(INT_MASK + EVERGREEN_CRTC5_REGISTER_OFFSET, crtc6); } WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET, grph1); WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET, grph2); - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, grph3); - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, grph4); - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, grph5); - WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, grph6); + if (rdev->num_crtc >= 4) { + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET, grph3); + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET, grph4); + } + if (rdev->num_crtc >= 6) { + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, grph5); + WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, grph6); + } WREG32(DC_HPD1_INT_CONTROL, hpd1); WREG32(DC_HPD2_INT_CONTROL, hpd2); @@ -2580,53 +2617,57 @@ static inline void evergreen_irq_ack(struct radeon_device *rdev) rdev->irq.stat_regs.evergreen.disp_int_cont5 = RREG32(DISP_INTERRUPT_STATUS_CONTINUE5); rdev->irq.stat_regs.evergreen.d1grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC0_REGISTER_OFFSET); rdev->irq.stat_regs.evergreen.d2grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC1_REGISTER_OFFSET); - rdev->irq.stat_regs.evergreen.d3grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET); - rdev->irq.stat_regs.evergreen.d4grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET); - rdev->irq.stat_regs.evergreen.d5grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET); - rdev->irq.stat_regs.evergreen.d6grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET); + if (rdev->num_crtc >= 4) { + rdev->irq.stat_regs.evergreen.d3grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET); + rdev->irq.stat_regs.evergreen.d4grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET); + } + if (rdev->num_crtc >= 6) { + rdev->irq.stat_regs.evergreen.d5grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET); + rdev->irq.stat_regs.evergreen.d6grph_int = RREG32(GRPH_INT_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET); + } if (rdev->irq.stat_regs.evergreen.d1grph_int & GRPH_PFLIP_INT_OCCURRED) WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC0_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR); if (rdev->irq.stat_regs.evergreen.d2grph_int & GRPH_PFLIP_INT_OCCURRED) WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC1_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR); - if (rdev->irq.stat_regs.evergreen.d3grph_int & GRPH_PFLIP_INT_OCCURRED) - WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR); - if (rdev->irq.stat_regs.evergreen.d4grph_int & GRPH_PFLIP_INT_OCCURRED) - WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR); - if (rdev->irq.stat_regs.evergreen.d5grph_int & GRPH_PFLIP_INT_OCCURRED) - WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR); - if (rdev->irq.stat_regs.evergreen.d6grph_int & GRPH_PFLIP_INT_OCCURRED) - WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR); - if (rdev->irq.stat_regs.evergreen.disp_int & LB_D1_VBLANK_INTERRUPT) WREG32(VBLANK_STATUS + EVERGREEN_CRTC0_REGISTER_OFFSET, VBLANK_ACK); if (rdev->irq.stat_regs.evergreen.disp_int & LB_D1_VLINE_INTERRUPT) WREG32(VLINE_STATUS + EVERGREEN_CRTC0_REGISTER_OFFSET, VLINE_ACK); - if (rdev->irq.stat_regs.evergreen.disp_int_cont & LB_D2_VBLANK_INTERRUPT) WREG32(VBLANK_STATUS + EVERGREEN_CRTC1_REGISTER_OFFSET, VBLANK_ACK); if (rdev->irq.stat_regs.evergreen.disp_int_cont & LB_D2_VLINE_INTERRUPT) WREG32(VLINE_STATUS + EVERGREEN_CRTC1_REGISTER_OFFSET, VLINE_ACK); - if (rdev->irq.stat_regs.evergreen.disp_int_cont2 & LB_D3_VBLANK_INTERRUPT) - WREG32(VBLANK_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, VBLANK_ACK); - if (rdev->irq.stat_regs.evergreen.disp_int_cont2 & LB_D3_VLINE_INTERRUPT) - WREG32(VLINE_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, VLINE_ACK); - - if (rdev->irq.stat_regs.evergreen.disp_int_cont3 & LB_D4_VBLANK_INTERRUPT) - WREG32(VBLANK_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET, VBLANK_ACK); - if (rdev->irq.stat_regs.evergreen.disp_int_cont3 & LB_D4_VLINE_INTERRUPT) - WREG32(VLINE_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET, VLINE_ACK); - - if (rdev->irq.stat_regs.evergreen.disp_int_cont4 & LB_D5_VBLANK_INTERRUPT) - WREG32(VBLANK_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, VBLANK_ACK); - if (rdev->irq.stat_regs.evergreen.disp_int_cont4 & LB_D5_VLINE_INTERRUPT) - WREG32(VLINE_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, VLINE_ACK); - - if (rdev->irq.stat_regs.evergreen.disp_int_cont5 & LB_D6_VBLANK_INTERRUPT) - WREG32(VBLANK_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET, VBLANK_ACK); - if (rdev->irq.stat_regs.evergreen.disp_int_cont5 & LB_D6_VLINE_INTERRUPT) - WREG32(VLINE_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET, VLINE_ACK); + if (rdev->num_crtc >= 4) { + if (rdev->irq.stat_regs.evergreen.d3grph_int & GRPH_PFLIP_INT_OCCURRED) + WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR); + if (rdev->irq.stat_regs.evergreen.d4grph_int & GRPH_PFLIP_INT_OCCURRED) + WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR); + if (rdev->irq.stat_regs.evergreen.disp_int_cont2 & LB_D3_VBLANK_INTERRUPT) + WREG32(VBLANK_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, VBLANK_ACK); + if (rdev->irq.stat_regs.evergreen.disp_int_cont2 & LB_D3_VLINE_INTERRUPT) + WREG32(VLINE_STATUS + EVERGREEN_CRTC2_REGISTER_OFFSET, VLINE_ACK); + if (rdev->irq.stat_regs.evergreen.disp_int_cont3 & LB_D4_VBLANK_INTERRUPT) + WREG32(VBLANK_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET, VBLANK_ACK); + if (rdev->irq.stat_regs.evergreen.disp_int_cont3 & LB_D4_VLINE_INTERRUPT) + WREG32(VLINE_STATUS + EVERGREEN_CRTC3_REGISTER_OFFSET, VLINE_ACK); + } + + if (rdev->num_crtc >= 6) { + if (rdev->irq.stat_regs.evergreen.d5grph_int & GRPH_PFLIP_INT_OCCURRED) + WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR); + if (rdev->irq.stat_regs.evergreen.d6grph_int & GRPH_PFLIP_INT_OCCURRED) + WREG32(GRPH_INT_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET, GRPH_PFLIP_INT_CLEAR); + if (rdev->irq.stat_regs.evergreen.disp_int_cont4 & LB_D5_VBLANK_INTERRUPT) + WREG32(VBLANK_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, VBLANK_ACK); + if (rdev->irq.stat_regs.evergreen.disp_int_cont4 & LB_D5_VLINE_INTERRUPT) + WREG32(VLINE_STATUS + EVERGREEN_CRTC4_REGISTER_OFFSET, VLINE_ACK); + if (rdev->irq.stat_regs.evergreen.disp_int_cont5 & LB_D6_VBLANK_INTERRUPT) + WREG32(VBLANK_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET, VBLANK_ACK); + if (rdev->irq.stat_regs.evergreen.disp_int_cont5 & LB_D6_VLINE_INTERRUPT) + WREG32(VLINE_STATUS + EVERGREEN_CRTC5_REGISTER_OFFSET, VLINE_ACK); + } if (rdev->irq.stat_regs.evergreen.disp_int & DC_HPD1_INTERRUPT) { tmp = RREG32(DC_HPD1_INT_CONTROL); @@ -3234,6 +3275,7 @@ void evergreen_fini(struct radeon_device *rdev) r700_cp_fini(rdev); r600_irq_fini(rdev); radeon_wb_fini(rdev); + radeon_ib_pool_fini(rdev); radeon_irq_kms_fini(rdev); evergreen_pcie_gart_fini(rdev); radeon_gem_fini(rdev); diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h index 321c822065fc..7363d9dec909 100644 --- a/drivers/gpu/drm/radeon/evergreend.h +++ b/drivers/gpu/drm/radeon/evergreend.h @@ -467,7 +467,7 @@ #define IH_RB_WPTR_ADDR_LO 0x3e14 #define IH_CNTL 0x3e18 # define ENABLE_INTR (1 << 0) -# define IH_MC_SWAP(x) ((x) << 2) +# define IH_MC_SWAP(x) ((x) << 1) # define IH_MC_SWAP_NONE 0 # define IH_MC_SWAP_16BIT 1 # define IH_MC_SWAP_32BIT 2 @@ -548,7 +548,7 @@ # define LB_D5_VBLANK_INTERRUPT (1 << 3) # define DC_HPD5_INTERRUPT (1 << 17) # define DC_HPD5_RX_INTERRUPT (1 << 18) -#define DISP_INTERRUPT_STATUS_CONTINUE5 0x6050 +#define DISP_INTERRUPT_STATUS_CONTINUE5 0x6150 # define LB_D6_VLINE_INTERRUPT (1 << 2) # define LB_D6_VBLANK_INTERRUPT (1 << 3) # define DC_HPD6_INTERRUPT (1 << 17) diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index 16caafeadf5e..44c4750f4518 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -833,6 +833,7 @@ static void cayman_gpu_init(struct radeon_device *rdev) rdev->config.cayman.tile_config |= ((gb_addr_config & ROW_SIZE_MASK) >> ROW_SIZE_SHIFT) << 12; + rdev->config.cayman.backend_map = gb_backend_map; WREG32(GB_BACKEND_MAP, gb_backend_map); WREG32(GB_ADDR_CONFIG, gb_addr_config); WREG32(DMIF_ADDR_CONFIG, gb_addr_config); @@ -1581,6 +1582,7 @@ void cayman_fini(struct radeon_device *rdev) cayman_cp_fini(rdev); r600_irq_fini(rdev); radeon_wb_fini(rdev); + radeon_ib_pool_fini(rdev); radeon_irq_kms_fini(rdev); cayman_pcie_gart_fini(rdev); radeon_gem_fini(rdev); diff --git a/drivers/gpu/drm/radeon/nid.h b/drivers/gpu/drm/radeon/nid.h index 9736746da2d6..4672869cdb26 100644 --- a/drivers/gpu/drm/radeon/nid.h +++ b/drivers/gpu/drm/radeon/nid.h @@ -320,7 +320,7 @@ #define CGTS_USER_TCC_DISABLE 0x914C #define TCC_DISABLE_MASK 0xFFFF0000 #define TCC_DISABLE_SHIFT 16 -#define CGTS_SM_CTRL_REG 0x915C +#define CGTS_SM_CTRL_REG 0x9150 #define OVERRIDE (1 << 21) #define TA_CNTL_AUX 0x9508 diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index f79d2ccb6755..9fefce704f96 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1662,6 +1662,7 @@ void r600_gpu_init(struct radeon_device *rdev) R6XX_MAX_BACKENDS_MASK) >> 16)), (cc_rb_backend_disable >> 16)); rdev->config.r600.tile_config = tiling_config; + rdev->config.r600.backend_map = backend_map; tiling_config |= BACKEND_MAP(backend_map); WREG32(GB_TILING_CONFIG, tiling_config); WREG32(DCP_TILING_CONFIG, tiling_config & 0xffff); @@ -2628,6 +2629,7 @@ void r600_fini(struct radeon_device *rdev) r600_cp_fini(rdev); r600_irq_fini(rdev); radeon_wb_fini(rdev); + radeon_ib_pool_fini(rdev); radeon_irq_kms_fini(rdev); r600_pcie_gart_fini(rdev); radeon_agp_fini(rdev); diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h index f140a0d5cb54..0245ae6c204e 100644 --- a/drivers/gpu/drm/radeon/r600d.h +++ b/drivers/gpu/drm/radeon/r600d.h @@ -536,7 +536,7 @@ #define IH_RB_WPTR_ADDR_LO 0x3e14 #define IH_CNTL 0x3e18 # define ENABLE_INTR (1 << 0) -# define IH_MC_SWAP(x) ((x) << 2) +# define IH_MC_SWAP(x) ((x) << 1) # define IH_MC_SWAP_NONE 0 # define IH_MC_SWAP_16BIT 1 # define IH_MC_SWAP_32BIT 2 diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 27f45579e64b..ec534f52408a 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -179,6 +179,7 @@ void radeon_pm_resume(struct radeon_device *rdev); void radeon_combios_get_power_modes(struct radeon_device *rdev); void radeon_atombios_get_power_modes(struct radeon_device *rdev); void radeon_atom_set_voltage(struct radeon_device *rdev, u16 voltage_level, u8 voltage_type); +int radeon_atom_get_max_vddc(struct radeon_device *rdev, u16 *voltage); void rs690_pm_info(struct radeon_device *rdev); extern int rv6xx_get_temp(struct radeon_device *rdev); extern int rv770_get_temp(struct radeon_device *rdev); @@ -1002,6 +1003,7 @@ struct r600_asic { unsigned tiling_npipes; unsigned tiling_group_size; unsigned tile_config; + unsigned backend_map; struct r100_gpu_lockup lockup; }; @@ -1027,6 +1029,7 @@ struct rv770_asic { unsigned tiling_npipes; unsigned tiling_group_size; unsigned tile_config; + unsigned backend_map; struct r100_gpu_lockup lockup; }; @@ -1053,6 +1056,7 @@ struct evergreen_asic { unsigned tiling_npipes; unsigned tiling_group_size; unsigned tile_config; + unsigned backend_map; struct r100_gpu_lockup lockup; }; diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 1e725d9f767f..bf2b61584cdb 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -2320,6 +2320,14 @@ static bool radeon_atombios_parse_pplib_clock_info(struct radeon_device *rdev, le16_to_cpu(clock_info->r600.usVDDC); } + /* patch up vddc if necessary */ + if (rdev->pm.power_state[state_index].clock_info[mode_index].voltage.voltage == 0xff01) { + u16 vddc; + + if (radeon_atom_get_max_vddc(rdev, &vddc) == 0) + rdev->pm.power_state[state_index].clock_info[mode_index].voltage.voltage = vddc; + } + if (rdev->flags & RADEON_IS_IGP) { /* skip invalid modes */ if (rdev->pm.power_state[state_index].clock_info[mode_index].sclk == 0) @@ -2630,7 +2638,35 @@ void radeon_atom_set_voltage(struct radeon_device *rdev, u16 voltage_level, u8 v atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } +int radeon_atom_get_max_vddc(struct radeon_device *rdev, + u16 *voltage) +{ + union set_voltage args; + int index = GetIndexIntoMasterTable(COMMAND, SetVoltage); + u8 frev, crev; + + if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev)) + return -EINVAL; + + switch (crev) { + case 1: + return -EINVAL; + case 2: + args.v2.ucVoltageType = SET_VOLTAGE_GET_MAX_VOLTAGE; + args.v2.ucVoltageMode = 0; + args.v2.usVoltageLevel = 0; + + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); + + *voltage = le16_to_cpu(args.v2.usVoltageLevel); + break; + default: + DRM_ERROR("Unknown table version %d, %d\n", frev, crev); + return -EINVAL; + } + return 0; +} void radeon_atom_initialize_bios_scratch_regs(struct drm_device *dev) { diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c index 1aba85cad1a8..3fc5fa1aefd0 100644 --- a/drivers/gpu/drm/radeon/radeon_bios.c +++ b/drivers/gpu/drm/radeon/radeon_bios.c @@ -104,7 +104,7 @@ static bool radeon_read_bios(struct radeon_device *rdev) static bool radeon_atrm_get_bios(struct radeon_device *rdev) { int ret; - int size = 64 * 1024; + int size = 256 * 1024; int i; if (!radeon_atrm_supported(rdev->pdev)) diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c index 75867792a4e2..045ec59478f9 100644 --- a/drivers/gpu/drm/radeon/radeon_cp.c +++ b/drivers/gpu/drm/radeon/radeon_cp.c @@ -2115,7 +2115,7 @@ int radeon_driver_load(struct drm_device *dev, unsigned long flags) if (drm_pci_device_is_agp(dev)) dev_priv->flags |= RADEON_IS_AGP; - else if (drm_pci_device_is_pcie(dev)) + else if (pci_is_pcie(dev->pdev)) dev_priv->flags |= RADEON_IS_PCIE; else dev_priv->flags |= RADEON_IS_PCI; diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 292f73f0ddbd..28f4655905bc 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -282,7 +282,7 @@ void radeon_crtc_handle_flip(struct radeon_device *rdev, int crtc_id) spin_lock_irqsave(&rdev->ddev->event_lock, flags); work = radeon_crtc->unpin_work; if (work == NULL || - !radeon_fence_signaled(work->fence)) { + (work->fence && !radeon_fence_signaled(work->fence))) { spin_unlock_irqrestore(&rdev->ddev->event_lock, flags); return; } @@ -348,7 +348,6 @@ static int radeon_crtc_page_flip(struct drm_crtc *crtc, struct radeon_framebuffer *new_radeon_fb; struct drm_gem_object *obj; struct radeon_bo *rbo; - struct radeon_fence *fence; struct radeon_unpin_work *work; unsigned long flags; u32 tiling_flags, pitch_pixels; @@ -359,16 +358,9 @@ static int radeon_crtc_page_flip(struct drm_crtc *crtc, if (work == NULL) return -ENOMEM; - r = radeon_fence_create(rdev, &fence); - if (unlikely(r != 0)) { - kfree(work); - DRM_ERROR("flip queue: failed to create fence.\n"); - return -ENOMEM; - } work->event = event; work->rdev = rdev; work->crtc_id = radeon_crtc->crtc_id; - work->fence = radeon_fence_ref(fence); old_radeon_fb = to_radeon_framebuffer(crtc->fb); new_radeon_fb = to_radeon_framebuffer(fb); /* schedule unpin of the old buffer */ @@ -377,6 +369,10 @@ static int radeon_crtc_page_flip(struct drm_crtc *crtc, drm_gem_object_reference(obj); rbo = gem_to_radeon_bo(obj); work->old_rbo = rbo; + obj = new_radeon_fb->obj; + rbo = gem_to_radeon_bo(obj); + if (rbo->tbo.sync_obj) + work->fence = radeon_fence_ref(rbo->tbo.sync_obj); INIT_WORK(&work->work, radeon_unpin_work_func); /* We borrow the event spin lock for protecting unpin_work */ @@ -391,9 +387,6 @@ static int radeon_crtc_page_flip(struct drm_crtc *crtc, spin_unlock_irqrestore(&dev->event_lock, flags); /* pin the new buffer */ - obj = new_radeon_fb->obj; - rbo = gem_to_radeon_bo(obj); - DRM_DEBUG_DRIVER("flip-ioctl() cur_fbo = %p, cur_bbo = %p\n", work->old_rbo, rbo); @@ -461,37 +454,18 @@ static int radeon_crtc_page_flip(struct drm_crtc *crtc, goto pflip_cleanup1; } - /* 32 ought to cover us */ - r = radeon_ring_lock(rdev, 32); - if (r) { - DRM_ERROR("failed to lock the ring before flip\n"); - goto pflip_cleanup2; - } - - /* emit the fence */ - radeon_fence_emit(rdev, fence); /* set the proper interrupt */ radeon_pre_page_flip(rdev, radeon_crtc->crtc_id); - /* fire the ring */ - radeon_ring_unlock_commit(rdev); return 0; -pflip_cleanup2: - drm_vblank_put(dev, radeon_crtc->crtc_id); - pflip_cleanup1: - r = radeon_bo_reserve(rbo, false); - if (unlikely(r != 0)) { + if (unlikely(radeon_bo_reserve(rbo, false) != 0)) { DRM_ERROR("failed to reserve new rbo in error path\n"); goto pflip_cleanup; } - r = radeon_bo_unpin(rbo); - if (unlikely(r != 0)) { - radeon_bo_unreserve(rbo); - r = -EINVAL; + if (unlikely(radeon_bo_unpin(rbo) != 0)) { DRM_ERROR("failed to unpin new rbo in error path\n"); - goto pflip_cleanup; } radeon_bo_unreserve(rbo); @@ -501,7 +475,7 @@ pflip_cleanup: unlock_free: drm_gem_object_unreference_unlocked(old_radeon_fb->obj); spin_unlock_irqrestore(&dev->event_lock, flags); - radeon_fence_unref(&fence); + radeon_fence_unref(&work->fence); kfree(work); return r; diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index cbb4584a4a23..85f033f19a8a 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -51,9 +51,10 @@ * 2.8.0 - pageflip support, r500 US_FORMAT regs. r500 ARGB2101010 colorbuf, r300->r500 CMASK, clock crystal query * 2.9.0 - r600 tiling (s3tc,rgtc) working, SET_PREDICATION packet 3 on r600 + eg, backend query * 2.10.0 - fusion 2D tiling, initial compute support for the CS checker + * 2.11.0 - backend map */ #define KMS_DRIVER_MAJOR 2 -#define KMS_DRIVER_MINOR 10 +#define KMS_DRIVER_MINOR 11 #define KMS_DRIVER_PATCHLEVEL 0 int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags); int radeon_driver_unload_kms(struct drm_device *dev); diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c index bd58af658581..be2c1224e68a 100644 --- a/drivers/gpu/drm/radeon/radeon_kms.c +++ b/drivers/gpu/drm/radeon/radeon_kms.c @@ -60,7 +60,7 @@ int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags) /* update BUS flag */ if (drm_pci_device_is_agp(dev)) { flags |= RADEON_IS_AGP; - } else if (drm_pci_device_is_pcie(dev)) { + } else if (pci_is_pcie(dev->pdev)) { flags |= RADEON_IS_PCIE; } else { flags |= RADEON_IS_PCI; @@ -237,6 +237,19 @@ int radeon_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) case RADEON_INFO_FUSION_GART_WORKING: value = 1; break; + case RADEON_INFO_BACKEND_MAP: + if (rdev->family >= CHIP_CAYMAN) + value = rdev->config.cayman.backend_map; + else if (rdev->family >= CHIP_CEDAR) + value = rdev->config.evergreen.backend_map; + else if (rdev->family >= CHIP_RV770) + value = rdev->config.rv770.backend_map; + else if (rdev->family >= CHIP_R600) + value = rdev->config.r600.backend_map; + else { + return -EINVAL; + } + break; default: DRM_DEBUG_KMS("Invalid request %d\n", info->request); return -EINVAL; diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 6f508ffd1035..4720d000d440 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -575,6 +575,12 @@ static void rv770_program_channel_remap(struct radeon_device *rdev) else tcp_chan_steer = 0x00fac688; + /* RV770 CE has special chremap setup */ + if (rdev->pdev->device == 0x944e) { + tcp_chan_steer = 0x00b08b08; + mc_shared_chremap = 0x00b08b08; + } + WREG32(TCP_CHAN_STEER, tcp_chan_steer); WREG32(MC_SHARED_CHREMAP, mc_shared_chremap); } @@ -772,6 +778,7 @@ static void rv770_gpu_init(struct radeon_device *rdev) (cc_rb_backend_disable >> 16)); rdev->config.rv770.tile_config = gb_tiling_config; + rdev->config.rv770.backend_map = backend_map; gb_tiling_config |= BACKEND_MAP(backend_map); WREG32(GB_TILING_CONFIG, gb_tiling_config); @@ -1362,6 +1369,7 @@ void rv770_fini(struct radeon_device *rdev) r700_cp_fini(rdev); r600_irq_fini(rdev); radeon_wb_fini(rdev); + radeon_ib_pool_fini(rdev); radeon_irq_kms_fini(rdev); rv770_pcie_gart_fini(rdev); rv770_vram_scratch_fini(rdev); diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c index 90e23e0bfadb..58c271ebc0f7 100644 --- a/drivers/gpu/drm/ttm/ttm_tt.c +++ b/drivers/gpu/drm/ttm/ttm_tt.c @@ -31,6 +31,7 @@ #include <linux/sched.h> #include <linux/highmem.h> #include <linux/pagemap.h> +#include <linux/shmem_fs.h> #include <linux/file.h> #include <linux/swap.h> #include <linux/slab.h> @@ -484,7 +485,7 @@ static int ttm_tt_swapin(struct ttm_tt *ttm) swap_space = swap_storage->f_path.dentry->d_inode->i_mapping; for (i = 0; i < ttm->num_pages; ++i) { - from_page = read_mapping_page(swap_space, i, NULL); + from_page = shmem_read_mapping_page(swap_space, i); if (IS_ERR(from_page)) { ret = PTR_ERR(from_page); goto out_err; @@ -557,7 +558,7 @@ int ttm_tt_swapout(struct ttm_tt *ttm, struct file *persistent_swap_storage) from_page = ttm->pages[i]; if (unlikely(from_page == NULL)) continue; - to_page = read_mapping_page(swap_space, i, NULL); + to_page = shmem_read_mapping_page(swap_space, i); if (unlikely(IS_ERR(to_page))) { ret = PTR_ERR(to_page); goto out_err; diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index f7440e8ce3e7..6f3289a57888 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1423,6 +1423,7 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACENAVIGATOR) }, { HID_USB_DEVICE(USB_VENDOR_ID_LUMIO, USB_DEVICE_ID_CRYSTALTOUCH) }, + { HID_USB_DEVICE(USB_VENDOR_ID_LUMIO, USB_DEVICE_ID_CRYSTALTOUCH_DUAL) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD_BOOTLOADER) }, { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index aecb5a4b8d6d..a756ee6c7df5 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -449,6 +449,7 @@ #define USB_VENDOR_ID_LUMIO 0x202e #define USB_DEVICE_ID_CRYSTALTOUCH 0x0006 +#define USB_DEVICE_ID_CRYSTALTOUCH_DUAL 0x0007 #define USB_VENDOR_ID_MCC 0x09db #define USB_DEVICE_ID_MCC_PMD1024LS 0x0076 diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index 0b2dcd0ee591..62cac4dc3b62 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -271,6 +271,8 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi, } return 1; case HID_DG_CONTACTID: + if (!td->maxcontacts) + td->maxcontacts = MT_DEFAULT_MAXCONTACT; input_mt_init_slots(hi->input, td->maxcontacts); td->last_slot_field = usage->hid; td->last_field_index = field->index; @@ -547,9 +549,6 @@ static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id) if (ret) goto fail; - if (!td->maxcontacts) - td->maxcontacts = MT_DEFAULT_MAXCONTACT; - td->slots = kzalloc(td->maxcontacts * sizeof(struct mt_slot), GFP_KERNEL); if (!td->slots) { @@ -677,6 +676,9 @@ static const struct hid_device_id mt_devices[] = { { .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE, HID_USB_DEVICE(USB_VENDOR_ID_LUMIO, USB_DEVICE_ID_CRYSTALTOUCH) }, + { .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE, + HID_USB_DEVICE(USB_VENDOR_ID_LUMIO, + USB_DEVICE_ID_CRYSTALTOUCH_DUAL) }, /* MosArt panels */ { .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE, @@ -707,10 +709,10 @@ static const struct hid_device_id mt_devices[] = { HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, USB_DEVICE_ID_MTP)}, { .driver_data = MT_CLS_CONFIDENCE, - HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, + HID_USB_DEVICE(USB_VENDOR_ID_STANTUM_STM, USB_DEVICE_ID_MTP_STM)}, { .driver_data = MT_CLS_CONFIDENCE, - HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, + HID_USB_DEVICE(USB_VENDOR_ID_STANTUM_SITRONIX, USB_DEVICE_ID_MTP_SITRONIX)}, /* Touch International panels */ diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 16db83c83c8b..5f888f7e7dcb 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -333,7 +333,7 @@ config SENSORS_F71882FG F71858FG F71862FG F71863FG - F71869F/E + F71869F/E/A F71882FG F71883FG F71889FG/ED/A diff --git a/drivers/hwmon/adm1275.c b/drivers/hwmon/adm1275.c index c2ee2048ab91..b9b7caf4a1d2 100644 --- a/drivers/hwmon/adm1275.c +++ b/drivers/hwmon/adm1275.c @@ -32,6 +32,7 @@ static int adm1275_probe(struct i2c_client *client, const struct i2c_device_id *id) { int config; + int ret; struct pmbus_driver_info *info; if (!i2c_check_functionality(client->adapter, @@ -43,8 +44,10 @@ static int adm1275_probe(struct i2c_client *client, return -ENOMEM; config = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG); - if (config < 0) - return config; + if (config < 0) { + ret = config; + goto err_mem; + } info->pages = 1; info->direct[PSC_VOLTAGE_IN] = true; @@ -76,7 +79,14 @@ static int adm1275_probe(struct i2c_client *client, else info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT; - return pmbus_do_probe(client, id, info); + ret = pmbus_do_probe(client, id, info); + if (ret) + goto err_mem; + return 0; + +err_mem: + kfree(info); + return ret; } static int adm1275_remove(struct i2c_client *client) diff --git a/drivers/hwmon/emc6w201.c b/drivers/hwmon/emc6w201.c index e0ef32378ac6..0064432f361f 100644 --- a/drivers/hwmon/emc6w201.c +++ b/drivers/hwmon/emc6w201.c @@ -78,8 +78,9 @@ static u16 emc6w201_read16(struct i2c_client *client, u8 reg) lsb = i2c_smbus_read_byte_data(client, reg); msb = i2c_smbus_read_byte_data(client, reg + 1); - if (lsb < 0 || msb < 0) { - dev_err(&client->dev, "16-bit read failed at 0x%02x\n", reg); + if (unlikely(lsb < 0 || msb < 0)) { + dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n", + 16, "read", reg); return 0xFFFF; /* Arbitrary value */ } @@ -95,10 +96,39 @@ static int emc6w201_write16(struct i2c_client *client, u8 reg, u16 val) int err; err = i2c_smbus_write_byte_data(client, reg, val & 0xff); - if (!err) + if (likely(!err)) err = i2c_smbus_write_byte_data(client, reg + 1, val >> 8); - if (err < 0) - dev_err(&client->dev, "16-bit write failed at 0x%02x\n", reg); + if (unlikely(err < 0)) + dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n", + 16, "write", reg); + + return err; +} + +/* Read 8-bit value from register */ +static u8 emc6w201_read8(struct i2c_client *client, u8 reg) +{ + int val; + + val = i2c_smbus_read_byte_data(client, reg); + if (unlikely(val < 0)) { + dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n", + 8, "read", reg); + return 0x00; /* Arbitrary value */ + } + + return val; +} + +/* Write 8-bit value to register */ +static int emc6w201_write8(struct i2c_client *client, u8 reg, u8 val) +{ + int err; + + err = i2c_smbus_write_byte_data(client, reg, val); + if (unlikely(err < 0)) + dev_err(&client->dev, "%d-bit %s failed at 0x%02x\n", + 8, "write", reg); return err; } @@ -114,25 +144,25 @@ static struct emc6w201_data *emc6w201_update_device(struct device *dev) if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { for (nr = 0; nr < 6; nr++) { data->in[input][nr] = - i2c_smbus_read_byte_data(client, + emc6w201_read8(client, EMC6W201_REG_IN(nr)); data->in[min][nr] = - i2c_smbus_read_byte_data(client, + emc6w201_read8(client, EMC6W201_REG_IN_LOW(nr)); data->in[max][nr] = - i2c_smbus_read_byte_data(client, + emc6w201_read8(client, EMC6W201_REG_IN_HIGH(nr)); } for (nr = 0; nr < 6; nr++) { data->temp[input][nr] = - i2c_smbus_read_byte_data(client, + emc6w201_read8(client, EMC6W201_REG_TEMP(nr)); data->temp[min][nr] = - i2c_smbus_read_byte_data(client, + emc6w201_read8(client, EMC6W201_REG_TEMP_LOW(nr)); data->temp[max][nr] = - i2c_smbus_read_byte_data(client, + emc6w201_read8(client, EMC6W201_REG_TEMP_HIGH(nr)); } @@ -192,7 +222,7 @@ static ssize_t set_in(struct device *dev, struct device_attribute *devattr, mutex_lock(&data->update_lock); data->in[sf][nr] = SENSORS_LIMIT(val, 0, 255); - err = i2c_smbus_write_byte_data(client, reg, data->in[sf][nr]); + err = emc6w201_write8(client, reg, data->in[sf][nr]); mutex_unlock(&data->update_lock); return err < 0 ? err : count; @@ -229,7 +259,7 @@ static ssize_t set_temp(struct device *dev, struct device_attribute *devattr, mutex_lock(&data->update_lock); data->temp[sf][nr] = SENSORS_LIMIT(val, -127, 128); - err = i2c_smbus_write_byte_data(client, reg, data->temp[sf][nr]); + err = emc6w201_write8(client, reg, data->temp[sf][nr]); mutex_unlock(&data->update_lock); return err < 0 ? err : count; @@ -444,7 +474,7 @@ static int emc6w201_detect(struct i2c_client *client, /* Check configuration */ config = i2c_smbus_read_byte_data(client, EMC6W201_REG_CONFIG); - if ((config & 0xF4) != 0x04) + if (config < 0 || (config & 0xF4) != 0x04) return -ENODEV; if (!(config & 0x01)) { dev_err(&client->dev, "Monitoring not enabled\n"); diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c index a4a94a096c90..2d96ed2bf8ed 100644 --- a/drivers/hwmon/f71882fg.c +++ b/drivers/hwmon/f71882fg.c @@ -52,6 +52,7 @@ #define SIO_F71858_ID 0x0507 /* Chipset ID */ #define SIO_F71862_ID 0x0601 /* Chipset ID */ #define SIO_F71869_ID 0x0814 /* Chipset ID */ +#define SIO_F71869A_ID 0x1007 /* Chipset ID */ #define SIO_F71882_ID 0x0541 /* Chipset ID */ #define SIO_F71889_ID 0x0723 /* Chipset ID */ #define SIO_F71889E_ID 0x0909 /* Chipset ID */ @@ -108,8 +109,8 @@ static unsigned short force_id; module_param(force_id, ushort, 0); MODULE_PARM_DESC(force_id, "Override the detected device ID"); -enum chips { f71808e, f71808a, f71858fg, f71862fg, f71869, f71882fg, f71889fg, - f71889ed, f71889a, f8000, f81865f }; +enum chips { f71808e, f71808a, f71858fg, f71862fg, f71869, f71869a, f71882fg, + f71889fg, f71889ed, f71889a, f8000, f81865f }; static const char *f71882fg_names[] = { "f71808e", @@ -117,6 +118,7 @@ static const char *f71882fg_names[] = { "f71858fg", "f71862fg", "f71869", /* Both f71869f and f71869e, reg. compatible and same id */ + "f71869a", "f71882fg", "f71889fg", /* f81801u too, same id */ "f71889ed", @@ -131,6 +133,7 @@ static const char f71882fg_has_in[][F71882FG_MAX_INS] = { [f71858fg] = { 1, 1, 1, 0, 0, 0, 0, 0, 0 }, [f71862fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, [f71869] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, + [f71869a] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, [f71882fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, [f71889fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, [f71889ed] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 }, @@ -145,6 +148,7 @@ static const char f71882fg_has_in1_alarm[] = { [f71858fg] = 0, [f71862fg] = 0, [f71869] = 0, + [f71869a] = 0, [f71882fg] = 1, [f71889fg] = 1, [f71889ed] = 1, @@ -159,6 +163,7 @@ static const char f71882fg_fan_has_beep[] = { [f71858fg] = 0, [f71862fg] = 1, [f71869] = 1, + [f71869a] = 1, [f71882fg] = 1, [f71889fg] = 1, [f71889ed] = 1, @@ -173,6 +178,7 @@ static const char f71882fg_nr_fans[] = { [f71858fg] = 3, [f71862fg] = 3, [f71869] = 3, + [f71869a] = 3, [f71882fg] = 4, [f71889fg] = 3, [f71889ed] = 3, @@ -187,6 +193,7 @@ static const char f71882fg_temp_has_beep[] = { [f71858fg] = 0, [f71862fg] = 1, [f71869] = 1, + [f71869a] = 1, [f71882fg] = 1, [f71889fg] = 1, [f71889ed] = 1, @@ -201,6 +208,7 @@ static const char f71882fg_nr_temps[] = { [f71858fg] = 3, [f71862fg] = 3, [f71869] = 3, + [f71869a] = 3, [f71882fg] = 3, [f71889fg] = 3, [f71889ed] = 3, @@ -2243,6 +2251,7 @@ static int __devinit f71882fg_probe(struct platform_device *pdev) case f71808e: case f71808a: case f71869: + case f71869a: /* These always have signed auto point temps */ data->auto_point_temp_signed = 1; /* Fall through to select correct fan/pwm reg bank! */ @@ -2305,6 +2314,7 @@ static int __devinit f71882fg_probe(struct platform_device *pdev) case f71808e: case f71808a: case f71869: + case f71869a: case f71889fg: case f71889ed: case f71889a: @@ -2528,6 +2538,9 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address, case SIO_F71869_ID: sio_data->type = f71869; break; + case SIO_F71869A_ID: + sio_data->type = f71869a; + break; case SIO_F71882_ID: sio_data->type = f71882fg; break; @@ -2662,7 +2675,7 @@ static void __exit f71882fg_exit(void) } MODULE_DESCRIPTION("F71882FG Hardware Monitoring Driver"); -MODULE_AUTHOR("Hans Edgington, Hans de Goede (hdegoede@redhat.com)"); +MODULE_AUTHOR("Hans Edgington, Hans de Goede <hdegoede@redhat.com>"); MODULE_LICENSE("GPL"); module_init(f71882fg_init); diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c index 2582bfef6ccb..c8195a077da3 100644 --- a/drivers/hwmon/hwmon-vid.c +++ b/drivers/hwmon/hwmon-vid.c @@ -202,7 +202,7 @@ static struct vrm_model vrm_models[] = { {X86_VENDOR_CENTAUR, 0x6, 0x7, ANY, 85}, /* Eden ESP/Ezra */ {X86_VENDOR_CENTAUR, 0x6, 0x8, 0x7, 85}, /* Ezra T */ - {X86_VENDOR_CENTAUR, 0x6, 0x9, 0x7, 85}, /* Nemiah */ + {X86_VENDOR_CENTAUR, 0x6, 0x9, 0x7, 85}, /* Nehemiah */ {X86_VENDOR_CENTAUR, 0x6, 0x9, ANY, 17}, /* C3-M, Eden-N */ {X86_VENDOR_CENTAUR, 0x6, 0xA, 0x7, 0}, /* No information */ {X86_VENDOR_CENTAUR, 0x6, 0xA, ANY, 13}, /* C7, Esther */ diff --git a/drivers/hwmon/lm95241.c b/drivers/hwmon/lm95241.c index 1a6dfb6df1e7..d3b464b74ced 100644 --- a/drivers/hwmon/lm95241.c +++ b/drivers/hwmon/lm95241.c @@ -98,11 +98,16 @@ struct lm95241_data { }; /* Conversions */ -static int TempFromReg(u8 val_h, u8 val_l) +static int temp_from_reg_signed(u8 val_h, u8 val_l) { - if (val_h & 0x80) - return val_h - 0x100; - return val_h * 1000 + val_l * 1000 / 256; + s16 val_hl = (val_h << 8) | val_l; + return val_hl * 1000 / 256; +} + +static int temp_from_reg_unsigned(u8 val_h, u8 val_l) +{ + u16 val_hl = (val_h << 8) | val_l; + return val_hl * 1000 / 256; } static struct lm95241_data *lm95241_update_device(struct device *dev) @@ -135,10 +140,13 @@ static ssize_t show_input(struct device *dev, struct device_attribute *attr, char *buf) { struct lm95241_data *data = lm95241_update_device(dev); + int index = to_sensor_dev_attr(attr)->index; return snprintf(buf, PAGE_SIZE - 1, "%d\n", - TempFromReg(data->temp[to_sensor_dev_attr(attr)->index], - data->temp[to_sensor_dev_attr(attr)->index + 1])); + index == 0 || (data->config & (1 << (index / 2))) ? + temp_from_reg_signed(data->temp[index], data->temp[index + 1]) : + temp_from_reg_unsigned(data->temp[index], + data->temp[index + 1])); } static ssize_t show_type(struct device *dev, struct device_attribute *attr, @@ -339,7 +347,7 @@ static int lm95241_detect(struct i2c_client *new_client, if ((i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID) == MANUFACTURER_ID) && (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID) - >= DEFAULT_REVISION)) { + == DEFAULT_REVISION)) { name = DEVNAME; } else { dev_dbg(&adapter->dev, "LM95241 detection failed at 0x%02x\n", diff --git a/drivers/hwmon/pmbus.c b/drivers/hwmon/pmbus.c index 98e2e28899e2..9b1f0c37ef77 100644 --- a/drivers/hwmon/pmbus.c +++ b/drivers/hwmon/pmbus.c @@ -47,22 +47,29 @@ static void pmbus_find_sensor_groups(struct i2c_client *client, if (info->func[0] && pmbus_check_byte_register(client, 0, PMBUS_STATUS_INPUT)) info->func[0] |= PMBUS_HAVE_STATUS_INPUT; - if (pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_1)) { + if (pmbus_check_byte_register(client, 0, PMBUS_FAN_CONFIG_12) && + pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_1)) { info->func[0] |= PMBUS_HAVE_FAN12; if (pmbus_check_byte_register(client, 0, PMBUS_STATUS_FAN_12)) info->func[0] |= PMBUS_HAVE_STATUS_FAN12; } - if (pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_3)) { + if (pmbus_check_byte_register(client, 0, PMBUS_FAN_CONFIG_34) && + pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_3)) { info->func[0] |= PMBUS_HAVE_FAN34; if (pmbus_check_byte_register(client, 0, PMBUS_STATUS_FAN_34)) info->func[0] |= PMBUS_HAVE_STATUS_FAN34; } - if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_1)) { + if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_1)) info->func[0] |= PMBUS_HAVE_TEMP; - if (pmbus_check_byte_register(client, 0, - PMBUS_STATUS_TEMPERATURE)) + if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_2)) + info->func[0] |= PMBUS_HAVE_TEMP2; + if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_3)) + info->func[0] |= PMBUS_HAVE_TEMP3; + if (info->func[0] & (PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 + | PMBUS_HAVE_TEMP3) + && pmbus_check_byte_register(client, 0, + PMBUS_STATUS_TEMPERATURE)) info->func[0] |= PMBUS_HAVE_STATUS_TEMP; - } /* Sensors detected on all pages */ for (page = 0; page < info->pages; page++) { diff --git a/drivers/hwmon/pmbus_core.c b/drivers/hwmon/pmbus_core.c index 354770ed3186..744672c1f26d 100644 --- a/drivers/hwmon/pmbus_core.c +++ b/drivers/hwmon/pmbus_core.c @@ -1430,14 +1430,9 @@ int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id, i2c_set_clientdata(client, data); mutex_init(&data->update_lock); - /* - * Bail out if status register or PMBus revision register - * does not exist. - */ - if (i2c_smbus_read_byte_data(client, PMBUS_STATUS_BYTE) < 0 - || i2c_smbus_read_byte_data(client, PMBUS_REVISION) < 0) { - dev_err(&client->dev, - "Status or revision register not found\n"); + /* Bail out if PMBus status register does not exist. */ + if (i2c_smbus_read_byte_data(client, PMBUS_STATUS_BYTE) < 0) { + dev_err(&client->dev, "PMBus status register not found\n"); ret = -ENODEV; goto out_data; } diff --git a/drivers/hwmon/sch5627.c b/drivers/hwmon/sch5627.c index 020c87273ea1..3494a4cce414 100644 --- a/drivers/hwmon/sch5627.c +++ b/drivers/hwmon/sch5627.c @@ -887,7 +887,7 @@ static void __exit sch5627_exit(void) } MODULE_DESCRIPTION("SMSC SCH5627 Hardware Monitoring Driver"); -MODULE_AUTHOR("Hans de Goede (hdegoede@redhat.com)"); +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); MODULE_LICENSE("GPL"); module_init(sch5627_init); diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c index 52b545a795f2..cbc98aea5b09 100644 --- a/drivers/i2c/busses/i2c-bfin-twi.c +++ b/drivers/i2c/busses/i2c-bfin-twi.c @@ -193,7 +193,13 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface, return; } if (twi_int_status & MCOMP) { - if (iface->cur_mode == TWI_I2C_MODE_COMBINED) { + if ((read_MASTER_CTL(iface) & MEN) == 0 && + (iface->cur_mode == TWI_I2C_MODE_REPEAT || + iface->cur_mode == TWI_I2C_MODE_COMBINED)) { + iface->result = -1; + write_INT_MASK(iface, 0); + write_MASTER_CTL(iface, 0); + } else if (iface->cur_mode == TWI_I2C_MODE_COMBINED) { if (iface->readNum == 0) { /* set the read number to 1 and ask for manual * stop in block combine mode diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 6c00c107ebf3..f84a63c6dd97 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -248,12 +248,12 @@ static inline int is_msgend(struct s3c24xx_i2c *i2c) return i2c->msg_ptr >= i2c->msg->len; } -/* i2s_s3c_irq_nextbyte +/* i2c_s3c_irq_nextbyte * * process an interrupt and work out what to do */ -static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) +static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) { unsigned long tmp; unsigned char byte; @@ -264,7 +264,6 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) case STATE_IDLE: dev_err(i2c->dev, "%s: called in STATE_IDLE\n", __func__); goto out; - break; case STATE_STOP: dev_err(i2c->dev, "%s: called in STATE_STOP\n", __func__); @@ -444,7 +443,7 @@ static irqreturn_t s3c24xx_i2c_irq(int irqno, void *dev_id) /* pretty much this leaves us with the fact that we've * transmitted or received whatever byte we last sent */ - i2s_s3c_irq_nextbyte(i2c, status); + i2c_s3c_irq_nextbyte(i2c, status); out: return IRQ_HANDLED; diff --git a/drivers/i2c/busses/i2c-taos-evm.c b/drivers/i2c/busses/i2c-taos-evm.c index dd39c1eb03ed..26c352a09298 100644 --- a/drivers/i2c/busses/i2c-taos-evm.c +++ b/drivers/i2c/busses/i2c-taos-evm.c @@ -234,7 +234,7 @@ static int taos_connect(struct serio *serio, struct serio_driver *drv) if (taos->state != TAOS_STATE_IDLE) { err = -ENODEV; - dev_dbg(&serio->dev, "TAOS EVM reset failed (state=%d, " + dev_err(&serio->dev, "TAOS EVM reset failed (state=%d, " "pos=%d)\n", taos->state, taos->pos); goto exit_close; } @@ -255,7 +255,7 @@ static int taos_connect(struct serio *serio, struct serio_driver *drv) msecs_to_jiffies(250)); if (taos->state != TAOS_STATE_IDLE) { err = -ENODEV; - dev_err(&adapter->dev, "Echo off failed " + dev_err(&serio->dev, "TAOS EVM echo off failed " "(state=%d)\n", taos->state); goto exit_close; } @@ -263,7 +263,7 @@ static int taos_connect(struct serio *serio, struct serio_driver *drv) err = i2c_add_adapter(adapter); if (err) goto exit_close; - dev_dbg(&serio->dev, "Connected to TAOS EVM\n"); + dev_info(&serio->dev, "Connected to TAOS EVM\n"); taos->client = taos_instantiate_device(adapter); return 0; @@ -288,7 +288,7 @@ static void taos_disconnect(struct serio *serio) serio_set_drvdata(serio, NULL); kfree(taos); - dev_dbg(&serio->dev, "Disconnected from TAOS EVM\n"); + dev_info(&serio->dev, "Disconnected from TAOS EVM\n"); } static struct serio_device_id taos_serio_ids[] = { diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 4d9319665e32..fb3b4f8f8152 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -40,8 +40,10 @@ #define I2C_CNFG_NEW_MASTER_FSM (1<<11) #define I2C_STATUS 0x01C #define I2C_SL_CNFG 0x020 +#define I2C_SL_CNFG_NACK (1<<1) #define I2C_SL_CNFG_NEWSL (1<<2) #define I2C_SL_ADDR1 0x02c +#define I2C_SL_ADDR2 0x030 #define I2C_TX_FIFO 0x050 #define I2C_RX_FIFO 0x054 #define I2C_PACKET_TRANSFER_STATUS 0x058 @@ -337,7 +339,11 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev) if (!i2c_dev->is_dvc) { u32 sl_cfg = i2c_readl(i2c_dev, I2C_SL_CNFG); - i2c_writel(i2c_dev, sl_cfg | I2C_SL_CNFG_NEWSL, I2C_SL_CNFG); + sl_cfg |= I2C_SL_CNFG_NACK | I2C_SL_CNFG_NEWSL; + i2c_writel(i2c_dev, sl_cfg, I2C_SL_CNFG); + i2c_writel(i2c_dev, 0xfc, I2C_SL_ADDR1); + i2c_writel(i2c_dev, 0x00, I2C_SL_ADDR2); + } val = 7 << I2C_FIFO_CONTROL_TX_TRIG_SHIFT | diff --git a/drivers/i2c/muxes/pca954x.c b/drivers/i2c/muxes/pca954x.c index 54e1ce73534b..6f8953664636 100644 --- a/drivers/i2c/muxes/pca954x.c +++ b/drivers/i2c/muxes/pca954x.c @@ -201,10 +201,11 @@ static int pca954x_probe(struct i2c_client *client, i2c_set_clientdata(client, data); - /* Read the mux register at addr to verify - * that the mux is in fact present. + /* Write the mux register at addr to verify + * that the mux is in fact present. This also + * initializes the mux to disconnected state. */ - if (i2c_smbus_read_byte(client) < 0) { + if (i2c_smbus_write_byte(client, 0) < 0) { dev_warn(&client->dev, "probe failed\n"); goto exit_free; } diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index f62f52fb9ece..fc0f2bd9ca82 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -3641,7 +3641,8 @@ static struct kobj_type cm_port_obj_type = { static char *cm_devnode(struct device *dev, mode_t *mode) { - *mode = 0666; + if (mode) + *mode = 0666; return kasprintf(GFP_KERNEL, "infiniband/%s", dev_name(dev)); } diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index e49a85f8a44d..56898b6578a4 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -826,7 +826,8 @@ static void ib_uverbs_remove_one(struct ib_device *device) static char *uverbs_devnode(struct device *dev, mode_t *mode) { - *mode = 0666; + if (mode) + *mode = 0666; return kasprintf(GFP_KERNEL, "infiniband/%s", dev_name(dev)); } diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index f660cd04ec2f..31fb44085c9b 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -1463,9 +1463,9 @@ static int peer_close(struct c4iw_dev *dev, struct sk_buff *skb) struct c4iw_qp_attributes attrs; int disconnect = 1; int release = 0; - int abort = 0; struct tid_info *t = dev->rdev.lldi.tids; unsigned int tid = GET_TID(hdr); + int ret; ep = lookup_tid(t, tid); PDBG("%s ep %p tid %u\n", __func__, ep, ep->hwtid); @@ -1501,10 +1501,12 @@ static int peer_close(struct c4iw_dev *dev, struct sk_buff *skb) start_ep_timer(ep); __state_set(&ep->com, CLOSING); attrs.next_state = C4IW_QP_STATE_CLOSING; - abort = c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp, + ret = c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp, C4IW_QP_ATTR_NEXT_STATE, &attrs, 1); - peer_close_upcall(ep); - disconnect = 1; + if (ret != -ECONNRESET) { + peer_close_upcall(ep); + disconnect = 1; + } break; case ABORTING: disconnect = 0; @@ -2109,15 +2111,16 @@ int c4iw_ep_disconnect(struct c4iw_ep *ep, int abrupt, gfp_t gfp) break; } - mutex_unlock(&ep->com.mutex); if (close) { - if (abrupt) - ret = abort_connection(ep, NULL, gfp); - else + if (abrupt) { + close_complete_upcall(ep); + ret = send_abort(ep, NULL, gfp); + } else ret = send_halfclose(ep, gfp); if (ret) fatal = 1; } + mutex_unlock(&ep->com.mutex); if (fatal) release_ep_resources(ep); return ret; @@ -2301,6 +2304,31 @@ static int fw6_msg(struct c4iw_dev *dev, struct sk_buff *skb) return 0; } +static int peer_abort_intr(struct c4iw_dev *dev, struct sk_buff *skb) +{ + struct cpl_abort_req_rss *req = cplhdr(skb); + struct c4iw_ep *ep; + struct tid_info *t = dev->rdev.lldi.tids; + unsigned int tid = GET_TID(req); + + ep = lookup_tid(t, tid); + if (is_neg_adv_abort(req->status)) { + PDBG("%s neg_adv_abort ep %p tid %u\n", __func__, ep, + ep->hwtid); + kfree_skb(skb); + return 0; + } + PDBG("%s ep %p tid %u state %u\n", __func__, ep, ep->hwtid, + ep->com.state); + + /* + * Wake up any threads in rdma_init() or rdma_fini(). + */ + c4iw_wake_up(&ep->com.wr_wait, -ECONNRESET); + sched(dev, skb); + return 0; +} + /* * Most upcalls from the T4 Core go to sched() to * schedule the processing on a work queue. @@ -2317,7 +2345,7 @@ c4iw_handler_func c4iw_handlers[NUM_CPL_CMDS] = { [CPL_PASS_ESTABLISH] = sched, [CPL_PEER_CLOSE] = sched, [CPL_CLOSE_CON_RPL] = sched, - [CPL_ABORT_REQ_RSS] = sched, + [CPL_ABORT_REQ_RSS] = peer_abort_intr, [CPL_RDMA_TERMINATE] = sched, [CPL_FW4_ACK] = sched, [CPL_SET_TCB_RPL] = set_tcb_rpl, diff --git a/drivers/infiniband/hw/cxgb4/cq.c b/drivers/infiniband/hw/cxgb4/cq.c index 8d8f8add6fcd..1720dc790d13 100644 --- a/drivers/infiniband/hw/cxgb4/cq.c +++ b/drivers/infiniband/hw/cxgb4/cq.c @@ -801,6 +801,10 @@ struct ib_cq *c4iw_create_cq(struct ib_device *ibdev, int entries, if (ucontext) { memsize = roundup(memsize, PAGE_SIZE); hwentries = memsize / sizeof *chp->cq.queue; + while (hwentries > T4_MAX_IQ_SIZE) { + memsize -= PAGE_SIZE; + hwentries = memsize / sizeof *chp->cq.queue; + } } chp->cq.size = hwentries; chp->cq.memsize = memsize; diff --git a/drivers/infiniband/hw/cxgb4/mem.c b/drivers/infiniband/hw/cxgb4/mem.c index 273ffe49525a..0347eed4a167 100644 --- a/drivers/infiniband/hw/cxgb4/mem.c +++ b/drivers/infiniband/hw/cxgb4/mem.c @@ -625,7 +625,7 @@ pbl_done: mhp->attr.perms = c4iw_ib_to_tpt_access(acc); mhp->attr.va_fbo = virt; mhp->attr.page_size = shift - 12; - mhp->attr.len = (u32) length; + mhp->attr.len = length; err = register_mem(rhp, php, mhp, shift); if (err) diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c index 3b773b05a898..a41578e48c7b 100644 --- a/drivers/infiniband/hw/cxgb4/qp.c +++ b/drivers/infiniband/hw/cxgb4/qp.c @@ -1207,11 +1207,8 @@ int c4iw_modify_qp(struct c4iw_dev *rhp, struct c4iw_qp *qhp, c4iw_get_ep(&qhp->ep->com); } ret = rdma_fini(rhp, qhp, ep); - if (ret) { - if (internal) - c4iw_get_ep(&qhp->ep->com); + if (ret) goto err; - } break; case C4IW_QP_STATE_TERMINATE: set_state(qhp, C4IW_QP_STATE_TERMINATE); diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c index 9f53e68a096a..8ec5237031a0 100644 --- a/drivers/infiniband/hw/qib/qib_iba7322.c +++ b/drivers/infiniband/hw/qib/qib_iba7322.c @@ -469,6 +469,8 @@ static u8 ib_rate_to_delay[IB_RATE_120_GBPS + 1] = { #define IB_7322_LT_STATE_RECOVERIDLE 0x0f #define IB_7322_LT_STATE_CFGENH 0x10 #define IB_7322_LT_STATE_CFGTEST 0x11 +#define IB_7322_LT_STATE_CFGWAITRMTTEST 0x12 +#define IB_7322_LT_STATE_CFGWAITENH 0x13 /* link state machine states from IBC */ #define IB_7322_L_STATE_DOWN 0x0 @@ -498,8 +500,10 @@ static const u8 qib_7322_physportstate[0x20] = { IB_PHYSPORTSTATE_LINK_ERR_RECOVER, [IB_7322_LT_STATE_CFGENH] = IB_PHYSPORTSTATE_CFG_ENH, [IB_7322_LT_STATE_CFGTEST] = IB_PHYSPORTSTATE_CFG_TRAIN, - [0x12] = IB_PHYSPORTSTATE_CFG_TRAIN, - [0x13] = IB_PHYSPORTSTATE_CFG_WAIT_ENH, + [IB_7322_LT_STATE_CFGWAITRMTTEST] = + IB_PHYSPORTSTATE_CFG_TRAIN, + [IB_7322_LT_STATE_CFGWAITENH] = + IB_PHYSPORTSTATE_CFG_WAIT_ENH, [0x14] = IB_PHYSPORTSTATE_CFG_TRAIN, [0x15] = IB_PHYSPORTSTATE_CFG_TRAIN, [0x16] = IB_PHYSPORTSTATE_CFG_TRAIN, @@ -1692,7 +1696,9 @@ static void handle_serdes_issues(struct qib_pportdata *ppd, u64 ibcst) break; } - if (ibclt == IB_7322_LT_STATE_CFGTEST && + if (((ibclt >= IB_7322_LT_STATE_CFGTEST && + ibclt <= IB_7322_LT_STATE_CFGWAITENH) || + ibclt == IB_7322_LT_STATE_LINKUP) && (ibcst & SYM_MASK(IBCStatusA_0, LinkSpeedQDR))) { force_h1(ppd); ppd->cpspec->qdr_reforce = 1; @@ -7301,12 +7307,17 @@ static void ibsd_wr_allchans(struct qib_pportdata *ppd, int addr, unsigned data, static void serdes_7322_los_enable(struct qib_pportdata *ppd, int enable) { u64 data = qib_read_kreg_port(ppd, krp_serdesctrl); - printk(KERN_INFO QIB_DRV_NAME " IB%u:%u Turning LOS %s\n", - ppd->dd->unit, ppd->port, (enable ? "on" : "off")); - if (enable) + u8 state = SYM_FIELD(data, IBSerdesCtrl_0, RXLOSEN); + + if (enable && !state) { + printk(KERN_INFO QIB_DRV_NAME " IB%u:%u Turning LOS on\n", + ppd->dd->unit, ppd->port); data |= SYM_MASK(IBSerdesCtrl_0, RXLOSEN); - else + } else if (!enable && state) { + printk(KERN_INFO QIB_DRV_NAME " IB%u:%u Turning LOS off\n", + ppd->dd->unit, ppd->port); data &= ~SYM_MASK(IBSerdesCtrl_0, RXLOSEN); + } qib_write_kreg_port(ppd, krp_serdesctrl, data); } diff --git a/drivers/infiniband/hw/qib/qib_intr.c b/drivers/infiniband/hw/qib/qib_intr.c index a693c56ec8a6..6ae57d23004a 100644 --- a/drivers/infiniband/hw/qib/qib_intr.c +++ b/drivers/infiniband/hw/qib/qib_intr.c @@ -96,8 +96,12 @@ void qib_handle_e_ibstatuschanged(struct qib_pportdata *ppd, u64 ibcs) * states, or if it transitions from any of the up (INIT or better) * states into any of the down states (except link recovery), then * call the chip-specific code to take appropriate actions. + * + * ppd->lflags could be 0 if this is the first time the interrupt + * handlers has been called but the link is already up. */ - if (lstate >= IB_PORT_INIT && (ppd->lflags & QIBL_LINKDOWN) && + if (lstate >= IB_PORT_INIT && + (!ppd->lflags || (ppd->lflags & QIBL_LINKDOWN)) && ltstate == IB_PHYSPORTSTATE_LINKUP) { /* transitioned to UP */ if (dd->f_ib_updown(ppd, 1, ibcs)) diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index be0921ef6b52..4cf25347b015 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -111,7 +111,8 @@ static void evdev_event(struct input_handle *handle, rcu_read_unlock(); - wake_up_interruptible(&evdev->wait); + if (type == EV_SYN && code == SYN_REPORT) + wake_up_interruptible(&evdev->wait); } static int evdev_fasync(int fd, struct file *file, int on) diff --git a/drivers/input/input.c b/drivers/input/input.c index 75e11c7b70fd..da38d97a51b1 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -1756,7 +1756,7 @@ static unsigned int input_estimate_events_per_packet(struct input_dev *dev) } else if (test_bit(ABS_MT_TRACKING_ID, dev->absbit)) { mt_slots = dev->absinfo[ABS_MT_TRACKING_ID].maximum - dev->absinfo[ABS_MT_TRACKING_ID].minimum + 1, - clamp(mt_slots, 2, 32); + mt_slots = clamp(mt_slots, 2, 32); } else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) { mt_slots = 2; } else { diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c index f23a743817db..33d0bdc837c0 100644 --- a/drivers/input/keyboard/omap-keypad.c +++ b/drivers/input/keyboard/omap-keypad.c @@ -209,6 +209,7 @@ static void omap_kp_tasklet(unsigned long data) #endif } } + input_sync(omap_kp_data->input); memcpy(keypad_state, new_state, sizeof(keypad_state)); if (key_down) { diff --git a/drivers/input/keyboard/pmic8xxx-keypad.c b/drivers/input/keyboard/pmic8xxx-keypad.c index 40b02ae96f86..6229c3e8e78b 100644 --- a/drivers/input/keyboard/pmic8xxx-keypad.c +++ b/drivers/input/keyboard/pmic8xxx-keypad.c @@ -520,7 +520,8 @@ static void pmic8xxx_kp_close(struct input_dev *dev) */ static int __devinit pmic8xxx_kp_probe(struct platform_device *pdev) { - const struct pm8xxx_keypad_platform_data *pdata = mfd_get_data(pdev); + const struct pm8xxx_keypad_platform_data *pdata = + dev_get_platdata(&pdev->dev); const struct matrix_keymap_data *keymap_data; struct pmic8xxx_kp *kp; int rc; diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c index 834cf98e7efb..6876700a4469 100644 --- a/drivers/input/keyboard/sh_keysc.c +++ b/drivers/input/keyboard/sh_keysc.c @@ -32,7 +32,7 @@ static const struct { [SH_KEYSC_MODE_3] = { 2, 4, 7 }, [SH_KEYSC_MODE_4] = { 3, 6, 6 }, [SH_KEYSC_MODE_5] = { 4, 6, 7 }, - [SH_KEYSC_MODE_6] = { 5, 7, 7 }, + [SH_KEYSC_MODE_6] = { 5, 8, 8 }, }; struct sh_keysc_priv { diff --git a/drivers/input/misc/pmic8xxx-pwrkey.c b/drivers/input/misc/pmic8xxx-pwrkey.c index 97e07e786e41..b3cfb9c71e66 100644 --- a/drivers/input/misc/pmic8xxx-pwrkey.c +++ b/drivers/input/misc/pmic8xxx-pwrkey.c @@ -90,7 +90,8 @@ static int __devinit pmic8xxx_pwrkey_probe(struct platform_device *pdev) unsigned int delay; u8 pon_cntl; struct pmic8xxx_pwrkey *pwrkey; - const struct pm8xxx_pwrkey_platform_data *pdata = mfd_get_data(pdev); + const struct pm8xxx_pwrkey_platform_data *pdata = + dev_get_platdata(&pdev->dev); if (!pdata) { dev_err(&pdev->dev, "power key platform data not supplied\n"); diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c index 257e033986e4..0110b5a3a167 100644 --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c @@ -187,7 +187,7 @@ static void mousedev_abs_event(struct input_dev *dev, struct mousedev *mousedev, if (size == 0) size = xres ? : 1; - clamp(value, min, max); + value = clamp(value, min, max); mousedev->packet.x = ((value - min) * xres) / size; mousedev->packet.abs_event = 1; @@ -201,7 +201,7 @@ static void mousedev_abs_event(struct input_dev *dev, struct mousedev *mousedev, if (size == 0) size = yres ? : 1; - clamp(value, min, max); + value = clamp(value, min, max); mousedev->packet.y = yres - ((value - min) * yres) / size; mousedev->packet.abs_event = 1; diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c index 59de638225fe..e35058bcd7b9 100644 --- a/drivers/isdn/gigaset/interface.c +++ b/drivers/isdn/gigaset/interface.c @@ -156,8 +156,10 @@ static int if_open(struct tty_struct *tty, struct file *filp) if (!cs || !try_module_get(cs->driver->owner)) return -ENODEV; - if (mutex_lock_interruptible(&cs->mutex)) + if (mutex_lock_interruptible(&cs->mutex)) { + module_put(cs->driver->owner); return -ERESTARTSYS; + } tty->driver_data = cs; ++cs->open_count; diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c index c0cff64a1ae6..cc1dc4817fac 100644 --- a/drivers/leds/leds-lp5521.c +++ b/drivers/leds/leds-lp5521.c @@ -593,7 +593,7 @@ static void lp5521_unregister_sysfs(struct i2c_client *client) &lp5521_led_attribute_group); } -static int __init lp5521_init_led(struct lp5521_led *led, +static int __devinit lp5521_init_led(struct lp5521_led *led, struct i2c_client *client, int chan, struct lp5521_platform_data *pdata) { @@ -637,7 +637,7 @@ static int __init lp5521_init_led(struct lp5521_led *led, return 0; } -static int lp5521_probe(struct i2c_client *client, +static int __devinit lp5521_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct lp5521_chip *chip; diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c index e19fed25f137..5971e309b234 100644 --- a/drivers/leds/leds-lp5523.c +++ b/drivers/leds/leds-lp5523.c @@ -826,7 +826,7 @@ static int __init lp5523_init_engine(struct lp5523_engine *engine, int id) return 0; } -static int __init lp5523_init_led(struct lp5523_led *led, struct device *dev, +static int __devinit lp5523_init_led(struct lp5523_led *led, struct device *dev, int chan, struct lp5523_platform_data *pdata) { char name[32]; @@ -872,7 +872,7 @@ static int __init lp5523_init_led(struct lp5523_led *led, struct device *dev, static struct i2c_driver lp5523_driver; -static int lp5523_probe(struct i2c_client *client, +static int __devinit lp5523_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct lp5523_chip *chip; diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c index d8d3a1e910a1..a2c874623e35 100644 --- a/drivers/leds/leds-pca9532.c +++ b/drivers/leds/leds-pca9532.c @@ -88,7 +88,7 @@ static const struct pca9532_chip_info pca9532_chip_info_tbl[] = { static struct i2c_driver pca9532_driver = { .driver = { - .name = "pca953x", + .name = "leds-pca953x", }, .probe = pca9532_probe, .remove = pca9532_remove, diff --git a/drivers/md/md.c b/drivers/md/md.c index 4332fc2f25d4..91e31e260b4a 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -7088,6 +7088,7 @@ static int remove_and_add_spares(mddev_t *mddev) list_for_each_entry(rdev, &mddev->disks, same_set) { if (rdev->raid_disk >= 0 && !test_bit(In_sync, &rdev->flags) && + !test_bit(Faulty, &rdev->flags) && !test_bit(Blocked, &rdev->flags)) spares++; if (rdev->raid_disk < 0 diff --git a/drivers/media/rc/fintek-cir.c b/drivers/media/rc/fintek-cir.c index 8fa539dde1b4..7f7079b12f23 100644 --- a/drivers/media/rc/fintek-cir.c +++ b/drivers/media/rc/fintek-cir.c @@ -597,12 +597,17 @@ static void __devexit fintek_remove(struct pnp_dev *pdev) static int fintek_suspend(struct pnp_dev *pdev, pm_message_t state) { struct fintek_dev *fintek = pnp_get_drvdata(pdev); + unsigned long flags; fit_dbg("%s called", __func__); + spin_lock_irqsave(&fintek->fintek_lock, flags); + /* disable all CIR interrupts */ fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS); + spin_unlock_irqrestore(&fintek->fintek_lock, flags); + fintek_config_mode_enable(fintek); /* disable cir logical dev */ diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c index 3f3c70716268..6bc35eeb653b 100644 --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -307,6 +307,14 @@ static const struct { /* 0xffdc iMON MCE VFD */ { 0x00010000ffffffeell, KEY_VOLUMEUP }, { 0x01000000ffffffeell, KEY_VOLUMEDOWN }, + { 0x00000001ffffffeell, KEY_MUTE }, + { 0x0000000fffffffeell, KEY_MEDIA }, + { 0x00000012ffffffeell, KEY_UP }, + { 0x00000013ffffffeell, KEY_DOWN }, + { 0x00000014ffffffeell, KEY_LEFT }, + { 0x00000015ffffffeell, KEY_RIGHT }, + { 0x00000016ffffffeell, KEY_ENTER }, + { 0x00000017ffffffeell, KEY_ESC }, /* iMON Knob values */ { 0x000100ffffffffeell, KEY_VOLUMEUP }, { 0x010000ffffffffeell, KEY_VOLUMEDOWN }, @@ -1582,16 +1590,16 @@ static void imon_incoming_packet(struct imon_context *ictx, /* Only panel type events left to process now */ spin_lock_irqsave(&ictx->kc_lock, flags); + do_gettimeofday(&t); /* KEY_MUTE repeats from knob need to be suppressed */ if (ictx->kc == KEY_MUTE && ictx->kc == ictx->last_keycode) { - do_gettimeofday(&t); msec = tv2int(&t, &prev_time); - prev_time = t; if (msec < ictx->idev->rep[REP_DELAY]) { spin_unlock_irqrestore(&ictx->kc_lock, flags); return; } } + prev_time = t; kc = ictx->kc; spin_unlock_irqrestore(&ictx->kc_lock, flags); @@ -1603,7 +1611,9 @@ static void imon_incoming_packet(struct imon_context *ictx, input_report_key(ictx->idev, kc, 0); input_sync(ictx->idev); + spin_lock_irqsave(&ictx->kc_lock, flags); ictx->last_keycode = kc; + spin_unlock_irqrestore(&ictx->kc_lock, flags); return; @@ -1740,6 +1750,8 @@ static void imon_get_ffdc_type(struct imon_context *ictx) detected_display_type = IMON_DISPLAY_TYPE_VFD; break; /* iMON VFD, MCE IR */ + case 0x46: + case 0x7e: case 0x9e: dev_info(ictx->dev, "0xffdc iMON VFD, MCE IR"); detected_display_type = IMON_DISPLAY_TYPE_VFD; @@ -1755,6 +1767,9 @@ static void imon_get_ffdc_type(struct imon_context *ictx) dev_info(ictx->dev, "Unknown 0xffdc device, " "defaulting to VFD and iMON IR"); detected_display_type = IMON_DISPLAY_TYPE_VFD; + /* We don't know which one it is, allow user to set the + * RC6 one from userspace if OTHER wasn't correct. */ + allowed_protos |= RC_TYPE_RC6; break; } diff --git a/drivers/media/rc/ir-raw.c b/drivers/media/rc/ir-raw.c index 11c19d8d0ee0..423ed45d6c55 100644 --- a/drivers/media/rc/ir-raw.c +++ b/drivers/media/rc/ir-raw.c @@ -114,18 +114,20 @@ int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type) s64 delta; /* ns */ DEFINE_IR_RAW_EVENT(ev); int rc = 0; + int delay; if (!dev->raw) return -EINVAL; now = ktime_get(); delta = ktime_to_ns(ktime_sub(now, dev->raw->last_event)); + delay = MS_TO_NS(dev->input_dev->rep[REP_DELAY]); /* Check for a long duration since last event or if we're * being called for the first time, note that delta can't * possibly be negative. */ - if (delta > IR_MAX_DURATION || !dev->raw->last_type) + if (delta > delay || !dev->raw->last_type) type |= IR_START_EVENT; else ev.duration = delta; diff --git a/drivers/media/rc/ite-cir.c b/drivers/media/rc/ite-cir.c index e716b931cf7e..ecd3d0280768 100644 --- a/drivers/media/rc/ite-cir.c +++ b/drivers/media/rc/ite-cir.c @@ -1347,6 +1347,7 @@ static const struct ite_dev_params ite_dev_descs[] = { { /* 0: ITE8704 */ .model = "ITE8704 CIR transceiver", .io_region_size = IT87_IOREG_LENGTH, + .io_rsrc_no = 0, .hw_tx_capable = true, .sample_period = (u32) (1000000000ULL / 115200), .tx_carrier_freq = 38000, @@ -1371,6 +1372,7 @@ static const struct ite_dev_params ite_dev_descs[] = { { /* 1: ITE8713 */ .model = "ITE8713 CIR transceiver", .io_region_size = IT87_IOREG_LENGTH, + .io_rsrc_no = 0, .hw_tx_capable = true, .sample_period = (u32) (1000000000ULL / 115200), .tx_carrier_freq = 38000, @@ -1395,6 +1397,7 @@ static const struct ite_dev_params ite_dev_descs[] = { { /* 2: ITE8708 */ .model = "ITE8708 CIR transceiver", .io_region_size = IT8708_IOREG_LENGTH, + .io_rsrc_no = 0, .hw_tx_capable = true, .sample_period = (u32) (1000000000ULL / 115200), .tx_carrier_freq = 38000, @@ -1420,6 +1423,7 @@ static const struct ite_dev_params ite_dev_descs[] = { { /* 3: ITE8709 */ .model = "ITE8709 CIR transceiver", .io_region_size = IT8709_IOREG_LENGTH, + .io_rsrc_no = 2, .hw_tx_capable = true, .sample_period = (u32) (1000000000ULL / 115200), .tx_carrier_freq = 38000, @@ -1461,6 +1465,7 @@ static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id struct rc_dev *rdev = NULL; int ret = -ENOMEM; int model_no; + int io_rsrc_no; ite_dbg("%s called", __func__); @@ -1490,10 +1495,11 @@ static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id /* get the description for the device */ dev_desc = &ite_dev_descs[model_no]; + io_rsrc_no = dev_desc->io_rsrc_no; /* validate pnp resources */ - if (!pnp_port_valid(pdev, 0) || - pnp_port_len(pdev, 0) != dev_desc->io_region_size) { + if (!pnp_port_valid(pdev, io_rsrc_no) || + pnp_port_len(pdev, io_rsrc_no) != dev_desc->io_region_size) { dev_err(&pdev->dev, "IR PNP Port not valid!\n"); goto failure; } @@ -1504,7 +1510,7 @@ static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id } /* store resource values */ - itdev->cir_addr = pnp_port_start(pdev, 0); + itdev->cir_addr = pnp_port_start(pdev, io_rsrc_no); itdev->cir_irq = pnp_irq(pdev, 0); /* initialize spinlocks */ diff --git a/drivers/media/rc/ite-cir.h b/drivers/media/rc/ite-cir.h index 16a19f5fd718..aa899a0b9750 100644 --- a/drivers/media/rc/ite-cir.h +++ b/drivers/media/rc/ite-cir.h @@ -57,6 +57,9 @@ struct ite_dev_params { /* size of the I/O region */ int io_region_size; + /* IR pnp I/O resource number */ + int io_rsrc_no; + /* true if the hardware supports transmission */ bool hw_tx_capable; diff --git a/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c b/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c index bb10ffe086b4..8d558ae63456 100644 --- a/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c +++ b/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c @@ -15,43 +15,39 @@ /* Pinnacle PCTV HD 800i mini remote */ static struct rc_map_table pinnacle_pctv_hd[] = { - - { 0x0f, KEY_1 }, - { 0x15, KEY_2 }, - { 0x10, KEY_3 }, - { 0x18, KEY_4 }, - { 0x1b, KEY_5 }, - { 0x1e, KEY_6 }, - { 0x11, KEY_7 }, - { 0x21, KEY_8 }, - { 0x12, KEY_9 }, - { 0x27, KEY_0 }, - - { 0x24, KEY_ZOOM }, - { 0x2a, KEY_SUBTITLE }, - - { 0x00, KEY_MUTE }, - { 0x01, KEY_ENTER }, /* Pinnacle Logo */ - { 0x39, KEY_POWER }, - - { 0x03, KEY_VOLUMEUP }, - { 0x09, KEY_VOLUMEDOWN }, - { 0x06, KEY_CHANNELUP }, - { 0x0c, KEY_CHANNELDOWN }, - - { 0x2d, KEY_REWIND }, - { 0x30, KEY_PLAYPAUSE }, - { 0x33, KEY_FASTFORWARD }, - { 0x3c, KEY_STOP }, - { 0x36, KEY_RECORD }, - { 0x3f, KEY_EPG }, /* Labeled "?" */ + /* Key codes for the tiny Pinnacle remote*/ + { 0x0700, KEY_MUTE }, + { 0x0701, KEY_MENU }, /* Pinnacle logo */ + { 0x0739, KEY_POWER }, + { 0x0703, KEY_VOLUMEUP }, + { 0x0709, KEY_VOLUMEDOWN }, + { 0x0706, KEY_CHANNELUP }, + { 0x070c, KEY_CHANNELDOWN }, + { 0x070f, KEY_1 }, + { 0x0715, KEY_2 }, + { 0x0710, KEY_3 }, + { 0x0718, KEY_4 }, + { 0x071b, KEY_5 }, + { 0x071e, KEY_6 }, + { 0x0711, KEY_7 }, + { 0x0721, KEY_8 }, + { 0x0712, KEY_9 }, + { 0x0727, KEY_0 }, + { 0x0724, KEY_ZOOM }, /* 'Square' key */ + { 0x072a, KEY_SUBTITLE }, /* 'T' key */ + { 0x072d, KEY_REWIND }, + { 0x0730, KEY_PLAYPAUSE }, + { 0x0733, KEY_FASTFORWARD }, + { 0x0736, KEY_RECORD }, + { 0x073c, KEY_STOP }, + { 0x073f, KEY_HELP }, /* '?' key */ }; static struct rc_map_list pinnacle_pctv_hd_map = { .map = { .scan = pinnacle_pctv_hd, .size = ARRAY_SIZE(pinnacle_pctv_hd), - .rc_type = RC_TYPE_UNKNOWN, /* Legacy IR type */ + .rc_type = RC_TYPE_RC5, .name = RC_MAP_PINNACLE_PCTV_HD, } }; diff --git a/drivers/media/rc/lirc_dev.c b/drivers/media/rc/lirc_dev.c index fd237ab120bb..27997a9ceb0d 100644 --- a/drivers/media/rc/lirc_dev.c +++ b/drivers/media/rc/lirc_dev.c @@ -55,6 +55,8 @@ struct irctl { struct lirc_buffer *buf; unsigned int chunk_size; + struct cdev *cdev; + struct task_struct *task; long jiffies_to_wait; }; @@ -62,7 +64,6 @@ struct irctl { static DEFINE_MUTEX(lirc_dev_lock); static struct irctl *irctls[MAX_IRCTL_DEVICES]; -static struct cdev cdevs[MAX_IRCTL_DEVICES]; /* Only used for sysfs but defined to void otherwise */ static struct class *lirc_class; @@ -167,9 +168,13 @@ static struct file_operations lirc_dev_fops = { static int lirc_cdev_add(struct irctl *ir) { - int retval; + int retval = -ENOMEM; struct lirc_driver *d = &ir->d; - struct cdev *cdev = &cdevs[d->minor]; + struct cdev *cdev; + + cdev = kzalloc(sizeof(*cdev), GFP_KERNEL); + if (!cdev) + goto err_out; if (d->fops) { cdev_init(cdev, d->fops); @@ -180,12 +185,20 @@ static int lirc_cdev_add(struct irctl *ir) } retval = kobject_set_name(&cdev->kobj, "lirc%d", d->minor); if (retval) - return retval; + goto err_out; retval = cdev_add(cdev, MKDEV(MAJOR(lirc_base_dev), d->minor), 1); - if (retval) + if (retval) { kobject_put(&cdev->kobj); + goto err_out; + } + + ir->cdev = cdev; + + return 0; +err_out: + kfree(cdev); return retval; } @@ -214,7 +227,7 @@ int lirc_register_driver(struct lirc_driver *d) if (MAX_IRCTL_DEVICES <= d->minor) { dev_err(d->dev, "lirc_dev: lirc_register_driver: " "\"minor\" must be between 0 and %d (%d)!\n", - MAX_IRCTL_DEVICES-1, d->minor); + MAX_IRCTL_DEVICES - 1, d->minor); err = -EBADRQC; goto out; } @@ -369,7 +382,7 @@ int lirc_unregister_driver(int minor) if (minor < 0 || minor >= MAX_IRCTL_DEVICES) { printk(KERN_ERR "lirc_dev: %s: minor (%d) must be between " - "0 and %d!\n", __func__, minor, MAX_IRCTL_DEVICES-1); + "0 and %d!\n", __func__, minor, MAX_IRCTL_DEVICES - 1); return -EBADRQC; } @@ -380,7 +393,7 @@ int lirc_unregister_driver(int minor) return -ENOENT; } - cdev = &cdevs[minor]; + cdev = ir->cdev; mutex_lock(&lirc_dev_lock); @@ -410,6 +423,7 @@ int lirc_unregister_driver(int minor) } else { lirc_irctl_cleanup(ir); cdev_del(cdev); + kfree(cdev); kfree(ir); irctls[minor] = NULL; } @@ -453,7 +467,7 @@ int lirc_dev_fop_open(struct inode *inode, struct file *file) goto error; } - cdev = &cdevs[iminor(inode)]; + cdev = ir->cdev; if (try_module_get(cdev->owner)) { ir->open++; retval = ir->d.set_use_inc(ir->d.data); @@ -484,13 +498,15 @@ EXPORT_SYMBOL(lirc_dev_fop_open); int lirc_dev_fop_close(struct inode *inode, struct file *file) { struct irctl *ir = irctls[iminor(inode)]; - struct cdev *cdev = &cdevs[iminor(inode)]; + struct cdev *cdev; if (!ir) { printk(KERN_ERR "%s: called with invalid irctl\n", __func__); return -EINVAL; } + cdev = ir->cdev; + dev_dbg(ir->d.dev, LOGHEAD "close called\n", ir->d.name, ir->d.minor); WARN_ON(mutex_lock_killable(&lirc_dev_lock)); @@ -503,6 +519,7 @@ int lirc_dev_fop_close(struct inode *inode, struct file *file) lirc_irctl_cleanup(ir); cdev_del(cdev); irctls[ir->d.minor] = NULL; + kfree(cdev); kfree(ir); } diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c index ad927fcaa020..06dfe0957b5e 100644 --- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -108,6 +108,12 @@ static int debug = 1; static int debug; #endif +#define mce_dbg(dev, fmt, ...) \ + do { \ + if (debug) \ + dev_info(dev, fmt, ## __VA_ARGS__); \ + } while (0) + /* general constants */ #define SEND_FLAG_IN_PROGRESS 1 #define SEND_FLAG_COMPLETE 2 @@ -246,6 +252,9 @@ static struct usb_device_id mceusb_dev_table[] = { .driver_info = MCE_GEN2_TX_INV }, /* SMK eHome Infrared Transceiver */ { USB_DEVICE(VENDOR_SMK, 0x0338) }, + /* SMK/I-O Data GV-MC7/RCKIT Receiver */ + { USB_DEVICE(VENDOR_SMK, 0x0353), + .driver_info = MCE_GEN2_NO_TX }, /* Tatung eHome Infrared Transceiver */ { USB_DEVICE(VENDOR_TATUNG, 0x9150) }, /* Shuttle eHome Infrared Transceiver */ @@ -606,12 +615,15 @@ static void mce_async_callback(struct urb *urb, struct pt_regs *regs) if (ir) { len = urb->actual_length; - dev_dbg(ir->dev, "callback called (status=%d len=%d)\n", + mce_dbg(ir->dev, "callback called (status=%d len=%d)\n", urb->status, len); mceusb_dev_printdata(ir, urb->transfer_buffer, 0, len, true); } + /* the transfer buffer and urb were allocated in mce_request_packet */ + kfree(urb->transfer_buffer); + usb_free_urb(urb); } /* request incoming or send outgoing usb packet - used to initialize remote */ @@ -655,17 +667,17 @@ static void mce_request_packet(struct mceusb_dev *ir, unsigned char *data, return; } - dev_dbg(dev, "receive request called (size=%#x)\n", size); + mce_dbg(dev, "receive request called (size=%#x)\n", size); async_urb->transfer_buffer_length = size; async_urb->dev = ir->usbdev; res = usb_submit_urb(async_urb, GFP_ATOMIC); if (res) { - dev_dbg(dev, "receive request FAILED! (res=%d)\n", res); + mce_dbg(dev, "receive request FAILED! (res=%d)\n", res); return; } - dev_dbg(dev, "receive request complete (res=%d)\n", res); + mce_dbg(dev, "receive request complete (res=%d)\n", res); } static void mce_async_out(struct mceusb_dev *ir, unsigned char *data, int size) @@ -673,9 +685,9 @@ static void mce_async_out(struct mceusb_dev *ir, unsigned char *data, int size) mce_request_packet(ir, data, size, MCEUSB_TX); } -static void mce_sync_in(struct mceusb_dev *ir, unsigned char *data, int size) +static void mce_flush_rx_buffer(struct mceusb_dev *ir, int size) { - mce_request_packet(ir, data, size, MCEUSB_RX); + mce_request_packet(ir, NULL, size, MCEUSB_RX); } /* Send data out the IR blaster port(s) */ @@ -794,7 +806,7 @@ static int mceusb_set_tx_carrier(struct rc_dev *dev, u32 carrier) ir->carrier = carrier; cmdbuf[2] = MCE_CMD_SIG_END; cmdbuf[3] = MCE_IRDATA_TRAILER; - dev_dbg(ir->dev, "%s: disabling carrier " + mce_dbg(ir->dev, "%s: disabling carrier " "modulation\n", __func__); mce_async_out(ir, cmdbuf, sizeof(cmdbuf)); return carrier; @@ -806,7 +818,7 @@ static int mceusb_set_tx_carrier(struct rc_dev *dev, u32 carrier) ir->carrier = carrier; cmdbuf[2] = prescaler; cmdbuf[3] = divisor; - dev_dbg(ir->dev, "%s: requesting %u HZ " + mce_dbg(ir->dev, "%s: requesting %u HZ " "carrier\n", __func__, carrier); /* Transmit new carrier to mce device */ @@ -879,7 +891,7 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len) rawir.duration = (ir->buf_in[i] & MCE_PULSE_MASK) * US_TO_NS(MCE_TIME_UNIT); - dev_dbg(ir->dev, "Storing %s with duration %d\n", + mce_dbg(ir->dev, "Storing %s with duration %d\n", rawir.pulse ? "pulse" : "space", rawir.duration); @@ -911,7 +923,7 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len) if (ir->parser_state != CMD_HEADER && !ir->rem) ir->parser_state = CMD_HEADER; } - dev_dbg(ir->dev, "processed IR data, calling ir_raw_event_handle\n"); + mce_dbg(ir->dev, "processed IR data, calling ir_raw_event_handle\n"); ir_raw_event_handle(ir->rc); } @@ -933,7 +945,7 @@ static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs) if (ir->send_flags == RECV_FLAG_IN_PROGRESS) { ir->send_flags = SEND_FLAG_COMPLETE; - dev_dbg(ir->dev, "setup answer received %d bytes\n", + mce_dbg(ir->dev, "setup answer received %d bytes\n", buf_len); } @@ -951,7 +963,7 @@ static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs) case -EPIPE: default: - dev_dbg(ir->dev, "Error: urb status = %d\n", urb->status); + mce_dbg(ir->dev, "Error: urb status = %d\n", urb->status); break; } @@ -961,7 +973,6 @@ static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs) static void mceusb_gen1_init(struct mceusb_dev *ir) { int ret; - int maxp = ir->len_in; struct device *dev = ir->dev; char *data; @@ -978,8 +989,8 @@ static void mceusb_gen1_init(struct mceusb_dev *ir) ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0), USB_REQ_SET_ADDRESS, USB_TYPE_VENDOR, 0, 0, data, USB_CTRL_MSG_SZ, HZ * 3); - dev_dbg(dev, "%s - ret = %d\n", __func__, ret); - dev_dbg(dev, "%s - data[0] = %d, data[1] = %d\n", + mce_dbg(dev, "%s - ret = %d\n", __func__, ret); + mce_dbg(dev, "%s - data[0] = %d, data[1] = %d\n", __func__, data[0], data[1]); /* set feature: bit rate 38400 bps */ @@ -987,71 +998,56 @@ static void mceusb_gen1_init(struct mceusb_dev *ir) USB_REQ_SET_FEATURE, USB_TYPE_VENDOR, 0xc04e, 0x0000, NULL, 0, HZ * 3); - dev_dbg(dev, "%s - ret = %d\n", __func__, ret); + mce_dbg(dev, "%s - ret = %d\n", __func__, ret); /* bRequest 4: set char length to 8 bits */ ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0), 4, USB_TYPE_VENDOR, 0x0808, 0x0000, NULL, 0, HZ * 3); - dev_dbg(dev, "%s - retB = %d\n", __func__, ret); + mce_dbg(dev, "%s - retB = %d\n", __func__, ret); /* bRequest 2: set handshaking to use DTR/DSR */ ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0), 2, USB_TYPE_VENDOR, 0x0000, 0x0100, NULL, 0, HZ * 3); - dev_dbg(dev, "%s - retC = %d\n", __func__, ret); + mce_dbg(dev, "%s - retC = %d\n", __func__, ret); /* device reset */ mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET)); - mce_sync_in(ir, NULL, maxp); /* get hw/sw revision? */ mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION)); - mce_sync_in(ir, NULL, maxp); kfree(data); }; static void mceusb_gen2_init(struct mceusb_dev *ir) { - int maxp = ir->len_in; - /* device reset */ mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET)); - mce_sync_in(ir, NULL, maxp); /* get hw/sw revision? */ mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION)); - mce_sync_in(ir, NULL, maxp); /* unknown what the next two actually return... */ mce_async_out(ir, GET_UNKNOWN, sizeof(GET_UNKNOWN)); - mce_sync_in(ir, NULL, maxp); mce_async_out(ir, GET_UNKNOWN2, sizeof(GET_UNKNOWN2)); - mce_sync_in(ir, NULL, maxp); } static void mceusb_get_parameters(struct mceusb_dev *ir) { - int maxp = ir->len_in; - /* get the carrier and frequency */ mce_async_out(ir, GET_CARRIER_FREQ, sizeof(GET_CARRIER_FREQ)); - mce_sync_in(ir, NULL, maxp); - if (!ir->flags.no_tx) { + if (!ir->flags.no_tx) /* get the transmitter bitmask */ mce_async_out(ir, GET_TX_BITMASK, sizeof(GET_TX_BITMASK)); - mce_sync_in(ir, NULL, maxp); - } /* get receiver timeout value */ mce_async_out(ir, GET_RX_TIMEOUT, sizeof(GET_RX_TIMEOUT)); - mce_sync_in(ir, NULL, maxp); /* get receiver sensor setting */ mce_async_out(ir, GET_RX_SENSOR, sizeof(GET_RX_SENSOR)); - mce_sync_in(ir, NULL, maxp); } static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir) @@ -1122,7 +1118,7 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf, bool tx_mask_normal; int ir_intfnum; - dev_dbg(&intf->dev, "%s called\n", __func__); + mce_dbg(&intf->dev, "%s called\n", __func__); idesc = intf->cur_altsetting; @@ -1150,7 +1146,7 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf, ep_in = ep; ep_in->bmAttributes = USB_ENDPOINT_XFER_INT; ep_in->bInterval = 1; - dev_dbg(&intf->dev, "acceptable inbound endpoint " + mce_dbg(&intf->dev, "acceptable inbound endpoint " "found\n"); } @@ -1165,12 +1161,12 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf, ep_out = ep; ep_out->bmAttributes = USB_ENDPOINT_XFER_INT; ep_out->bInterval = 1; - dev_dbg(&intf->dev, "acceptable outbound endpoint " + mce_dbg(&intf->dev, "acceptable outbound endpoint " "found\n"); } } if (ep_in == NULL) { - dev_dbg(&intf->dev, "inbound and/or endpoint not found\n"); + mce_dbg(&intf->dev, "inbound and/or endpoint not found\n"); return -ENODEV; } @@ -1215,16 +1211,16 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf, if (!ir->rc) goto rc_dev_fail; - /* flush buffers on the device */ - mce_sync_in(ir, NULL, maxp); - mce_sync_in(ir, NULL, maxp); - /* wire up inbound data handler */ usb_fill_int_urb(ir->urb_in, dev, pipe, ir->buf_in, maxp, (usb_complete_t) mceusb_dev_recv, ir, ep_in->bInterval); ir->urb_in->transfer_dma = ir->dma_in; ir->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + /* flush buffers on the device */ + mce_dbg(&intf->dev, "Flushing receive buffers\n"); + mce_flush_rx_buffer(ir, maxp); + /* initialize device */ if (ir->flags.microsoft_gen1) mceusb_gen1_init(ir); diff --git a/drivers/media/rc/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c index bf3060ea6107..565f24c20d77 100644 --- a/drivers/media/rc/nuvoton-cir.c +++ b/drivers/media/rc/nuvoton-cir.c @@ -991,7 +991,6 @@ static int nvt_open(struct rc_dev *dev) unsigned long flags; spin_lock_irqsave(&nvt->nvt_lock, flags); - nvt->in_use = true; nvt_enable_cir(nvt); spin_unlock_irqrestore(&nvt->nvt_lock, flags); @@ -1004,7 +1003,6 @@ static void nvt_close(struct rc_dev *dev) unsigned long flags; spin_lock_irqsave(&nvt->nvt_lock, flags); - nvt->in_use = false; nvt_disable_cir(nvt); spin_unlock_irqrestore(&nvt->nvt_lock, flags); } diff --git a/drivers/media/rc/nuvoton-cir.h b/drivers/media/rc/nuvoton-cir.h index 379795d61ea7..1241fc89a36c 100644 --- a/drivers/media/rc/nuvoton-cir.h +++ b/drivers/media/rc/nuvoton-cir.h @@ -70,7 +70,6 @@ struct nvt_dev { struct ir_raw_event rawir; spinlock_t nvt_lock; - bool in_use; /* for rx */ u8 buf[RX_BUF_LEN]; diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index f57cd5677ac2..3186ac7c2c10 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -522,18 +522,20 @@ EXPORT_SYMBOL_GPL(rc_g_keycode_from_table); /** * ir_do_keyup() - internal function to signal the release of a keypress * @dev: the struct rc_dev descriptor of the device + * @sync: whether or not to call input_sync * * This function is used internally to release a keypress, it must be * called with keylock held. */ -static void ir_do_keyup(struct rc_dev *dev) +static void ir_do_keyup(struct rc_dev *dev, bool sync) { if (!dev->keypressed) return; IR_dprintk(1, "keyup key 0x%04x\n", dev->last_keycode); input_report_key(dev->input_dev, dev->last_keycode, 0); - input_sync(dev->input_dev); + if (sync) + input_sync(dev->input_dev); dev->keypressed = false; } @@ -549,7 +551,7 @@ void rc_keyup(struct rc_dev *dev) unsigned long flags; spin_lock_irqsave(&dev->keylock, flags); - ir_do_keyup(dev); + ir_do_keyup(dev, true); spin_unlock_irqrestore(&dev->keylock, flags); } EXPORT_SYMBOL_GPL(rc_keyup); @@ -578,7 +580,7 @@ static void ir_timer_keyup(unsigned long cookie) */ spin_lock_irqsave(&dev->keylock, flags); if (time_is_before_eq_jiffies(dev->keyup_jiffies)) - ir_do_keyup(dev); + ir_do_keyup(dev, true); spin_unlock_irqrestore(&dev->keylock, flags); } @@ -597,6 +599,7 @@ void rc_repeat(struct rc_dev *dev) spin_lock_irqsave(&dev->keylock, flags); input_event(dev->input_dev, EV_MSC, MSC_SCAN, dev->last_scancode); + input_sync(dev->input_dev); if (!dev->keypressed) goto out; @@ -622,29 +625,28 @@ EXPORT_SYMBOL_GPL(rc_repeat); static void ir_do_keydown(struct rc_dev *dev, int scancode, u32 keycode, u8 toggle) { - input_event(dev->input_dev, EV_MSC, MSC_SCAN, scancode); - - /* Repeat event? */ - if (dev->keypressed && - dev->last_scancode == scancode && - dev->last_toggle == toggle) - return; + bool new_event = !dev->keypressed || + dev->last_scancode != scancode || + dev->last_toggle != toggle; - /* Release old keypress */ - ir_do_keyup(dev); + if (new_event && dev->keypressed) + ir_do_keyup(dev, false); - dev->last_scancode = scancode; - dev->last_toggle = toggle; - dev->last_keycode = keycode; + input_event(dev->input_dev, EV_MSC, MSC_SCAN, scancode); - if (keycode == KEY_RESERVED) - return; + if (new_event && keycode != KEY_RESERVED) { + /* Register a keypress */ + dev->keypressed = true; + dev->last_scancode = scancode; + dev->last_toggle = toggle; + dev->last_keycode = keycode; + + IR_dprintk(1, "%s: key down event, " + "key 0x%04x, scancode 0x%04x\n", + dev->input_name, keycode, scancode); + input_report_key(dev->input_dev, keycode, 1); + } - /* Register a keypress */ - dev->keypressed = true; - IR_dprintk(1, "%s: key down event, key 0x%04x, scancode 0x%04x\n", - dev->input_name, keycode, scancode); - input_report_key(dev->input_dev, dev->last_keycode, 1); input_sync(dev->input_dev); } diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index a97cf2750bd9..834a48394bce 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -3474,7 +3474,7 @@ static int radio_s_tuner(struct file *file, void *priv, if (0 != t->index) return -EINVAL; - bttv_call_all(btv, tuner, g_tuner, t); + bttv_call_all(btv, tuner, s_tuner, t); return 0; } diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c index 1933d4d11bf2..e80134f52ef5 100644 --- a/drivers/media/video/cx18/cx18-ioctl.c +++ b/drivers/media/video/cx18/cx18-ioctl.c @@ -695,14 +695,10 @@ static int cx18_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt) cx18_call_all(cx, tuner, g_tuner, vt); - if (test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)) { + if (vt->type == V4L2_TUNER_RADIO) strlcpy(vt->name, "cx18 Radio Tuner", sizeof(vt->name)); - vt->type = V4L2_TUNER_RADIO; - } else { + else strlcpy(vt->name, "cx18 TV Tuner", sizeof(vt->name)); - vt->type = V4L2_TUNER_ANALOG_TV; - } - return 0; } diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index f9e347dae739..120c7d8e0895 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -1184,14 +1184,10 @@ static int ivtv_g_tuner(struct file *file, void *fh, struct v4l2_tuner *vt) ivtv_call_all(itv, tuner, g_tuner, vt); - if (test_bit(IVTV_F_I_RADIO_USER, &itv->i_flags)) { + if (vt->type == V4L2_TUNER_RADIO) strlcpy(vt->name, "ivtv Radio Tuner", sizeof(vt->name)); - vt->type = V4L2_TUNER_RADIO; - } else { + else strlcpy(vt->name, "ivtv TV Tuner", sizeof(vt->name)); - vt->type = V4L2_TUNER_ANALOG_TV; - } - return 0; } diff --git a/drivers/media/video/m5mols/m5mols.h b/drivers/media/video/m5mols/m5mols.h index 10b55c854487..89d09a8914f8 100644 --- a/drivers/media/video/m5mols/m5mols.h +++ b/drivers/media/video/m5mols/m5mols.h @@ -2,10 +2,10 @@ * Header for M-5MOLS 8M Pixel camera sensor with ISP * * Copyright (C) 2011 Samsung Electronics Co., Ltd. - * Author: HeungJun Kim, riverful.kim@samsung.com + * Author: HeungJun Kim <riverful.kim@samsung.com> * * Copyright (C) 2009 Samsung Electronics Co., Ltd. - * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com + * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -106,23 +106,23 @@ struct m5mols_capture { * The each value according to each scenemode is recommended in the documents. */ struct m5mols_scenemode { - u32 metering; - u32 ev_bias; - u32 wb_mode; - u32 wb_preset; - u32 chroma_en; - u32 chroma_lvl; - u32 edge_en; - u32 edge_lvl; - u32 af_range; - u32 fd_mode; - u32 mcc; - u32 light; - u32 flash; - u32 tone; - u32 iso; - u32 capt_mode; - u32 wdr; + u8 metering; + u8 ev_bias; + u8 wb_mode; + u8 wb_preset; + u8 chroma_en; + u8 chroma_lvl; + u8 edge_en; + u8 edge_lvl; + u8 af_range; + u8 fd_mode; + u8 mcc; + u8 light; + u8 flash; + u8 tone; + u8 iso; + u8 capt_mode; + u8 wdr; }; /** @@ -154,7 +154,6 @@ struct m5mols_version { u8 str[VERSION_STRING_SIZE]; u8 af; }; -#define VERSION_SIZE sizeof(struct m5mols_version) /** * struct m5mols_info - M-5MOLS driver data structure @@ -216,9 +215,9 @@ struct m5mols_info { bool lock_ae; bool lock_awb; u8 resolution; - u32 interrupt; - u32 mode; - u32 mode_save; + u8 interrupt; + u8 mode; + u8 mode_save; int (*set_power)(struct device *dev, int on); }; @@ -256,9 +255,11 @@ struct m5mols_info { * +-------+---+----------+-----+------+------+------+------+ * - d[0..3]: according to size1 */ -int m5mols_read(struct v4l2_subdev *sd, u32 reg_comb, u32 *val); +int m5mols_read_u8(struct v4l2_subdev *sd, u32 reg_comb, u8 *val); +int m5mols_read_u16(struct v4l2_subdev *sd, u32 reg_comb, u16 *val); +int m5mols_read_u32(struct v4l2_subdev *sd, u32 reg_comb, u32 *val); int m5mols_write(struct v4l2_subdev *sd, u32 reg_comb, u32 val); -int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 value); +int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u8 value); /* * Mode operation of the M-5MOLS @@ -280,12 +281,12 @@ int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 value); * The available executing order between each modes are as follows: * PARAMETER <---> MONITOR <---> CAPTURE */ -int m5mols_mode(struct m5mols_info *info, u32 mode); +int m5mols_mode(struct m5mols_info *info, u8 mode); -int m5mols_enable_interrupt(struct v4l2_subdev *sd, u32 reg); +int m5mols_enable_interrupt(struct v4l2_subdev *sd, u8 reg); int m5mols_sync_controls(struct m5mols_info *info); int m5mols_start_capture(struct m5mols_info *info); -int m5mols_do_scenemode(struct m5mols_info *info, u32 mode); +int m5mols_do_scenemode(struct m5mols_info *info, u8 mode); int m5mols_lock_3a(struct m5mols_info *info, bool lock); int m5mols_set_ctrl(struct v4l2_ctrl *ctrl); diff --git a/drivers/media/video/m5mols/m5mols_capture.c b/drivers/media/video/m5mols/m5mols_capture.c index d71a3903b60f..d9471928369d 100644 --- a/drivers/media/video/m5mols/m5mols_capture.c +++ b/drivers/media/video/m5mols/m5mols_capture.c @@ -2,10 +2,10 @@ * The Capture code for Fujitsu M-5MOLS ISP * * Copyright (C) 2011 Samsung Electronics Co., Ltd. - * Author: HeungJun Kim, riverful.kim@samsung.com + * Author: HeungJun Kim <riverful.kim@samsung.com> * * Copyright (C) 2009 Samsung Electronics Co., Ltd. - * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com + * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -58,9 +58,9 @@ static int m5mols_read_rational(struct v4l2_subdev *sd, u32 addr_num, { u32 num, den; - int ret = m5mols_read(sd, addr_num, &num); + int ret = m5mols_read_u32(sd, addr_num, &num); if (!ret) - ret = m5mols_read(sd, addr_den, &den); + ret = m5mols_read_u32(sd, addr_den, &den); if (ret) return ret; *val = den == 0 ? 0 : num / den; @@ -99,20 +99,20 @@ static int m5mols_capture_info(struct m5mols_info *info) if (ret) return ret; - ret = m5mols_read(sd, EXIF_INFO_ISO, (u32 *)&exif->iso_speed); + ret = m5mols_read_u16(sd, EXIF_INFO_ISO, &exif->iso_speed); if (!ret) - ret = m5mols_read(sd, EXIF_INFO_FLASH, (u32 *)&exif->flash); + ret = m5mols_read_u16(sd, EXIF_INFO_FLASH, &exif->flash); if (!ret) - ret = m5mols_read(sd, EXIF_INFO_SDR, (u32 *)&exif->sdr); + ret = m5mols_read_u16(sd, EXIF_INFO_SDR, &exif->sdr); if (!ret) - ret = m5mols_read(sd, EXIF_INFO_QVAL, (u32 *)&exif->qval); + ret = m5mols_read_u16(sd, EXIF_INFO_QVAL, &exif->qval); if (ret) return ret; if (!ret) - ret = m5mols_read(sd, CAPC_IMAGE_SIZE, &info->cap.main); + ret = m5mols_read_u32(sd, CAPC_IMAGE_SIZE, &info->cap.main); if (!ret) - ret = m5mols_read(sd, CAPC_THUMB_SIZE, &info->cap.thumb); + ret = m5mols_read_u32(sd, CAPC_THUMB_SIZE, &info->cap.thumb); if (!ret) info->cap.total = info->cap.main + info->cap.thumb; @@ -122,7 +122,7 @@ static int m5mols_capture_info(struct m5mols_info *info) int m5mols_start_capture(struct m5mols_info *info) { struct v4l2_subdev *sd = &info->sd; - u32 resolution = info->resolution; + u8 resolution = info->resolution; int timeout; int ret; diff --git a/drivers/media/video/m5mols/m5mols_controls.c b/drivers/media/video/m5mols/m5mols_controls.c index 817c16fec368..d135d20d09cf 100644 --- a/drivers/media/video/m5mols/m5mols_controls.c +++ b/drivers/media/video/m5mols/m5mols_controls.c @@ -2,10 +2,10 @@ * Controls for M-5MOLS 8M Pixel camera sensor with ISP * * Copyright (C) 2011 Samsung Electronics Co., Ltd. - * Author: HeungJun Kim, riverful.kim@samsung.com + * Author: HeungJun Kim <riverful.kim@samsung.com> * * Copyright (C) 2009 Samsung Electronics Co., Ltd. - * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com + * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -130,7 +130,7 @@ static struct m5mols_scenemode m5mols_default_scenemode[] = { * * WARNING: The execution order is important. Do not change the order. */ -int m5mols_do_scenemode(struct m5mols_info *info, u32 mode) +int m5mols_do_scenemode(struct m5mols_info *info, u8 mode) { struct v4l2_subdev *sd = &info->sd; struct m5mols_scenemode scenemode = m5mols_default_scenemode[mode]; diff --git a/drivers/media/video/m5mols/m5mols_core.c b/drivers/media/video/m5mols/m5mols_core.c index 76eac26e84ae..43c68f51c5ce 100644 --- a/drivers/media/video/m5mols/m5mols_core.c +++ b/drivers/media/video/m5mols/m5mols_core.c @@ -2,10 +2,10 @@ * Driver for M-5MOLS 8M Pixel camera sensor with ISP * * Copyright (C) 2011 Samsung Electronics Co., Ltd. - * Author: HeungJun Kim, riverful.kim@samsung.com + * Author: HeungJun Kim <riverful.kim@samsung.com> * * Copyright (C) 2009 Samsung Electronics Co., Ltd. - * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com + * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -133,13 +133,13 @@ static u32 m5mols_swap_byte(u8 *data, u8 length) /** * m5mols_read - I2C read function * @reg: combination of size, category and command for the I2C packet + * @size: desired size of I2C packet * @val: read value */ -int m5mols_read(struct v4l2_subdev *sd, u32 reg, u32 *val) +static int m5mols_read(struct v4l2_subdev *sd, u32 size, u32 reg, u32 *val) { struct i2c_client *client = v4l2_get_subdevdata(sd); u8 rbuf[M5MOLS_I2C_MAX_SIZE + 1]; - u8 size = I2C_SIZE(reg); u8 category = I2C_CATEGORY(reg); u8 cmd = I2C_COMMAND(reg); struct i2c_msg msg[2]; @@ -149,11 +149,6 @@ int m5mols_read(struct v4l2_subdev *sd, u32 reg, u32 *val) if (!client->adapter) return -ENODEV; - if (size != 1 && size != 2 && size != 4) { - v4l2_err(sd, "Wrong data size\n"); - return -EINVAL; - } - msg[0].addr = client->addr; msg[0].flags = 0; msg[0].len = 5; @@ -184,6 +179,52 @@ int m5mols_read(struct v4l2_subdev *sd, u32 reg, u32 *val) return 0; } +int m5mols_read_u8(struct v4l2_subdev *sd, u32 reg, u8 *val) +{ + u32 val_32; + int ret; + + if (I2C_SIZE(reg) != 1) { + v4l2_err(sd, "Wrong data size\n"); + return -EINVAL; + } + + ret = m5mols_read(sd, I2C_SIZE(reg), reg, &val_32); + if (ret) + return ret; + + *val = (u8)val_32; + return ret; +} + +int m5mols_read_u16(struct v4l2_subdev *sd, u32 reg, u16 *val) +{ + u32 val_32; + int ret; + + if (I2C_SIZE(reg) != 2) { + v4l2_err(sd, "Wrong data size\n"); + return -EINVAL; + } + + ret = m5mols_read(sd, I2C_SIZE(reg), reg, &val_32); + if (ret) + return ret; + + *val = (u16)val_32; + return ret; +} + +int m5mols_read_u32(struct v4l2_subdev *sd, u32 reg, u32 *val) +{ + if (I2C_SIZE(reg) != 4) { + v4l2_err(sd, "Wrong data size\n"); + return -EINVAL; + } + + return m5mols_read(sd, I2C_SIZE(reg), reg, val); +} + /** * m5mols_write - I2C command write function * @reg: combination of size, category and command for the I2C packet @@ -231,13 +272,14 @@ int m5mols_write(struct v4l2_subdev *sd, u32 reg, u32 val) return 0; } -int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 mask) +int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u8 mask) { - u32 busy, i; + u8 busy; + int i; int ret; for (i = 0; i < M5MOLS_I2C_CHECK_RETRY; i++) { - ret = m5mols_read(sd, I2C_REG(category, cmd, 1), &busy); + ret = m5mols_read_u8(sd, I2C_REG(category, cmd, 1), &busy); if (ret < 0) return ret; if ((busy & mask) == mask) @@ -252,14 +294,14 @@ int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 mask) * Before writing desired interrupt value the INT_FACTOR register should * be read to clear pending interrupts. */ -int m5mols_enable_interrupt(struct v4l2_subdev *sd, u32 reg) +int m5mols_enable_interrupt(struct v4l2_subdev *sd, u8 reg) { struct m5mols_info *info = to_m5mols(sd); - u32 mask = is_available_af(info) ? REG_INT_AF : 0; - u32 dummy; + u8 mask = is_available_af(info) ? REG_INT_AF : 0; + u8 dummy; int ret; - ret = m5mols_read(sd, SYSTEM_INT_FACTOR, &dummy); + ret = m5mols_read_u8(sd, SYSTEM_INT_FACTOR, &dummy); if (!ret) ret = m5mols_write(sd, SYSTEM_INT_ENABLE, reg & ~mask); return ret; @@ -271,7 +313,7 @@ int m5mols_enable_interrupt(struct v4l2_subdev *sd, u32 reg) * It always accompanies a little delay changing the M-5MOLS mode, so it is * needed checking current busy status to guarantee right mode. */ -static int m5mols_reg_mode(struct v4l2_subdev *sd, u32 mode) +static int m5mols_reg_mode(struct v4l2_subdev *sd, u8 mode) { int ret = m5mols_write(sd, SYSTEM_SYSMODE, mode); @@ -286,16 +328,16 @@ static int m5mols_reg_mode(struct v4l2_subdev *sd, u32 mode) * can be guaranteed only when the sensor is operating in mode which which * a command belongs to. */ -int m5mols_mode(struct m5mols_info *info, u32 mode) +int m5mols_mode(struct m5mols_info *info, u8 mode) { struct v4l2_subdev *sd = &info->sd; int ret = -EINVAL; - u32 reg; + u8 reg; if (mode < REG_PARAMETER && mode > REG_CAPTURE) return ret; - ret = m5mols_read(sd, SYSTEM_SYSMODE, ®); + ret = m5mols_read_u8(sd, SYSTEM_SYSMODE, ®); if ((!ret && reg == mode) || ret) return ret; @@ -344,41 +386,37 @@ int m5mols_mode(struct m5mols_info *info, u32 mode) static int m5mols_get_version(struct v4l2_subdev *sd) { struct m5mols_info *info = to_m5mols(sd); - union { - struct m5mols_version ver; - u8 bytes[VERSION_SIZE]; - } version; - u32 *value; - u8 cmd = CAT0_VER_CUSTOMER; + struct m5mols_version *ver = &info->ver; + u8 *str = ver->str; + int i; int ret; - do { - value = (u32 *)&version.bytes[cmd]; - ret = m5mols_read(sd, SYSTEM_CMD(cmd), value); - if (ret) - return ret; - } while (cmd++ != CAT0_VER_AWB); + ret = m5mols_read_u8(sd, SYSTEM_VER_CUSTOMER, &ver->customer); + if (!ret) + ret = m5mols_read_u8(sd, SYSTEM_VER_PROJECT, &ver->project); + if (!ret) + ret = m5mols_read_u16(sd, SYSTEM_VER_FIRMWARE, &ver->fw); + if (!ret) + ret = m5mols_read_u16(sd, SYSTEM_VER_HARDWARE, &ver->hw); + if (!ret) + ret = m5mols_read_u16(sd, SYSTEM_VER_PARAMETER, &ver->param); + if (!ret) + ret = m5mols_read_u16(sd, SYSTEM_VER_AWB, &ver->awb); + if (!ret) + ret = m5mols_read_u8(sd, AF_VERSION, &ver->af); + if (ret) + return ret; - do { - value = (u32 *)&version.bytes[cmd]; - ret = m5mols_read(sd, SYSTEM_VER_STRING, value); + for (i = 0; i < VERSION_STRING_SIZE; i++) { + ret = m5mols_read_u8(sd, SYSTEM_VER_STRING, &str[i]); if (ret) return ret; - if (cmd >= VERSION_SIZE - 1) - return -EINVAL; - } while (version.bytes[cmd++]); - - value = (u32 *)&version.bytes[cmd]; - ret = m5mols_read(sd, AF_VERSION, value); - if (ret) - return ret; + } - /* store version information swapped for being readable */ - info->ver = version.ver; - info->ver.fw = be16_to_cpu(info->ver.fw); - info->ver.hw = be16_to_cpu(info->ver.hw); - info->ver.param = be16_to_cpu(info->ver.param); - info->ver.awb = be16_to_cpu(info->ver.awb); + ver->fw = be16_to_cpu(ver->fw); + ver->hw = be16_to_cpu(ver->hw); + ver->param = be16_to_cpu(ver->param); + ver->awb = be16_to_cpu(ver->awb); v4l2_info(sd, "Manufacturer\t[%s]\n", is_manufacturer(info, REG_SAMSUNG_ELECTRO) ? @@ -722,7 +760,7 @@ static int m5mols_init_controls(struct m5mols_info *info) int ret; /* Determine value's range & step of controls for various FW version */ - ret = m5mols_read(sd, AE_MAX_GAIN_MON, (u32 *)&max_exposure); + ret = m5mols_read_u16(sd, AE_MAX_GAIN_MON, &max_exposure); if (!ret) step_zoom = is_manufacturer(info, REG_SAMSUNG_OPTICS) ? 31 : 1; if (ret) @@ -842,18 +880,18 @@ static void m5mols_irq_work(struct work_struct *work) struct m5mols_info *info = container_of(work, struct m5mols_info, work_irq); struct v4l2_subdev *sd = &info->sd; - u32 reg; + u8 reg; int ret; if (!is_powered(info) || - m5mols_read(sd, SYSTEM_INT_FACTOR, &info->interrupt)) + m5mols_read_u8(sd, SYSTEM_INT_FACTOR, &info->interrupt)) return; switch (info->interrupt & REG_INT_MASK) { case REG_INT_AF: if (!is_available_af(info)) break; - ret = m5mols_read(sd, AF_STATUS, ®); + ret = m5mols_read_u8(sd, AF_STATUS, ®); v4l2_dbg(2, m5mols_debug, sd, "AF %s\n", reg == REG_AF_FAIL ? "Failed" : reg == REG_AF_SUCCESS ? "Success" : diff --git a/drivers/media/video/m5mols/m5mols_reg.h b/drivers/media/video/m5mols/m5mols_reg.h index b83e36fc6ac6..c755bd6edfe9 100644 --- a/drivers/media/video/m5mols/m5mols_reg.h +++ b/drivers/media/video/m5mols/m5mols_reg.h @@ -2,10 +2,10 @@ * Register map for M-5MOLS 8M Pixel camera sensor with ISP * * Copyright (C) 2011 Samsung Electronics Co., Ltd. - * Author: HeungJun Kim, riverful.kim@samsung.com + * Author: HeungJun Kim <riverful.kim@samsung.com> * * Copyright (C) 2009 Samsung Electronics Co., Ltd. - * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com + * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -56,13 +56,24 @@ * more specific contents, see definition if file m5mols.h. */ #define CAT0_VER_CUSTOMER 0x00 /* customer version */ -#define CAT0_VER_AWB 0x09 /* Auto WB version */ +#define CAT0_VER_PROJECT 0x01 /* project version */ +#define CAT0_VER_FIRMWARE 0x02 /* Firmware version */ +#define CAT0_VER_HARDWARE 0x04 /* Hardware version */ +#define CAT0_VER_PARAMETER 0x06 /* Parameter version */ +#define CAT0_VER_AWB 0x08 /* Auto WB version */ #define CAT0_VER_STRING 0x0a /* string including M-5MOLS */ #define CAT0_SYSMODE 0x0b /* SYSTEM mode register */ #define CAT0_STATUS 0x0c /* SYSTEM mode status register */ #define CAT0_INT_FACTOR 0x10 /* interrupt pending register */ #define CAT0_INT_ENABLE 0x11 /* interrupt enable register */ +#define SYSTEM_VER_CUSTOMER I2C_REG(CAT_SYSTEM, CAT0_VER_CUSTOMER, 1) +#define SYSTEM_VER_PROJECT I2C_REG(CAT_SYSTEM, CAT0_VER_PROJECT, 1) +#define SYSTEM_VER_FIRMWARE I2C_REG(CAT_SYSTEM, CAT0_VER_FIRMWARE, 2) +#define SYSTEM_VER_HARDWARE I2C_REG(CAT_SYSTEM, CAT0_VER_HARDWARE, 2) +#define SYSTEM_VER_PARAMETER I2C_REG(CAT_SYSTEM, CAT0_VER_PARAMETER, 2) +#define SYSTEM_VER_AWB I2C_REG(CAT_SYSTEM, CAT0_VER_AWB, 2) + #define SYSTEM_SYSMODE I2C_REG(CAT_SYSTEM, CAT0_SYSMODE, 1) #define REG_SYSINIT 0x00 /* SYSTEM mode */ #define REG_PARAMETER 0x01 /* PARAMETER mode */ @@ -382,8 +393,8 @@ #define REG_CAP_START_MAIN 0x01 #define REG_CAP_START_THUMB 0x03 -#define CAPC_IMAGE_SIZE I2C_REG(CAT_CAPT_CTRL, CATC_CAP_IMAGE_SIZE, 1) -#define CAPC_THUMB_SIZE I2C_REG(CAT_CAPT_CTRL, CATC_CAP_THUMB_SIZE, 1) +#define CAPC_IMAGE_SIZE I2C_REG(CAT_CAPT_CTRL, CATC_CAP_IMAGE_SIZE, 4) +#define CAPC_THUMB_SIZE I2C_REG(CAT_CAPT_CTRL, CATC_CAP_THUMB_SIZE, 4) /* * Category F - Flash diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c index de5d481b0328..c43c81f5f978 100644 --- a/drivers/media/video/msp3400-driver.c +++ b/drivers/media/video/msp3400-driver.c @@ -480,12 +480,14 @@ static int msp_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) struct msp_state *state = to_state(sd); struct i2c_client *client = v4l2_get_subdevdata(sd); - if (state->radio) + if (vt->type != V4L2_TUNER_ANALOG_TV) return 0; - if (state->opmode == OPMODE_AUTOSELECT) - msp_detect_stereo(client); - vt->audmode = state->audmode; - vt->rxsubchans = state->rxsubchans; + if (!state->radio) { + if (state->opmode == OPMODE_AUTOSELECT) + msp_detect_stereo(client); + vt->rxsubchans = state->rxsubchans; + } + vt->audmode = state->audmode; vt->capability |= V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2; return 0; diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c index bc0c23a1009c..63f8a0cc33d8 100644 --- a/drivers/media/video/mx1_camera.c +++ b/drivers/media/video/mx1_camera.c @@ -444,12 +444,9 @@ static int mx1_camera_add_device(struct soc_camera_device *icd) { struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); struct mx1_camera_dev *pcdev = ici->priv; - int ret; - if (pcdev->icd) { - ret = -EBUSY; - goto ebusy; - } + if (pcdev->icd) + return -EBUSY; dev_info(icd->dev.parent, "MX1 Camera driver attached to camera %d\n", icd->devnum); @@ -458,8 +455,7 @@ static int mx1_camera_add_device(struct soc_camera_device *icd) pcdev->icd = icd; -ebusy: - return ret; + return 0; } static void mx1_camera_remove_device(struct soc_camera_device *icd) diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c index 4ada9be1d430..4d07c5844402 100644 --- a/drivers/media/video/omap/omap_vout.c +++ b/drivers/media/video/omap/omap_vout.c @@ -982,6 +982,14 @@ static int omap_vout_buffer_setup(struct videobuf_queue *q, unsigned int *count, startindex = (vout->vid == OMAP_VIDEO1) ? video1_numbuffers : video2_numbuffers; + /* Check the size of the buffer */ + if (*size > vout->buffer_size) { + v4l2_err(&vout->vid_dev->v4l2_dev, + "buffer allocation mismatch [%u] [%u]\n", + *size, vout->buffer_size); + return -ENOMEM; + } + for (i = startindex; i < *count; i++) { vout->buffer_size = *size; @@ -1228,6 +1236,14 @@ static int omap_vout_mmap(struct file *file, struct vm_area_struct *vma) (vma->vm_pgoff << PAGE_SHIFT)); return -EINVAL; } + /* Check the size of the buffer */ + if (size > vout->buffer_size) { + v4l2_err(&vout->vid_dev->v4l2_dev, + "insufficient memory [%lu] [%u]\n", + size, vout->buffer_size); + return -ENOMEM; + } + q->bufs[i]->baddr = vma->vm_start; vma->vm_flags |= VM_RESERVED; @@ -2391,7 +2407,7 @@ static int __init omap_vout_create_video_devices(struct platform_device *pdev) /* Register the Video device with V4L2 */ vfd = vout->vfd; - if (video_register_device(vfd, VFL_TYPE_GRABBER, k + 1) < 0) { + if (video_register_device(vfd, VFL_TYPE_GRABBER, -1) < 0) { dev_err(&pdev->dev, ": Could not register " "Video for Linux device\n"); vfd->minor = -1; diff --git a/drivers/media/video/omap/omap_voutlib.c b/drivers/media/video/omap/omap_voutlib.c index 2aa6a76c5e59..8ae74817a110 100644 --- a/drivers/media/video/omap/omap_voutlib.c +++ b/drivers/media/video/omap/omap_voutlib.c @@ -193,7 +193,7 @@ int omap_vout_new_crop(struct v4l2_pix_format *pix, return -EINVAL; if (cpu_is_omap24xx()) { - if (crop->height != win->w.height) { + if (try_crop.height != win->w.height) { /* If we're resizing vertically, we can't support a * crop width wider than 768 pixels. */ @@ -202,7 +202,7 @@ int omap_vout_new_crop(struct v4l2_pix_format *pix, } } /* vertical resizing */ - vresize = (1024 * crop->height) / win->w.height; + vresize = (1024 * try_crop.height) / win->w.height; if (cpu_is_omap24xx() && (vresize > 2048)) vresize = 2048; else if (cpu_is_omap34xx() && (vresize > 4096)) @@ -221,7 +221,7 @@ int omap_vout_new_crop(struct v4l2_pix_format *pix, try_crop.height = 2; } /* horizontal resizing */ - hresize = (1024 * crop->width) / win->w.width; + hresize = (1024 * try_crop.width) / win->w.width; if (cpu_is_omap24xx() && (hresize > 2048)) hresize = 2048; else if (cpu_is_omap34xx() && (hresize > 4096)) diff --git a/drivers/media/video/omap3isp/isp.c b/drivers/media/video/omap3isp/isp.c index c9fd04ee70a8..94b6ed89e195 100644 --- a/drivers/media/video/omap3isp/isp.c +++ b/drivers/media/video/omap3isp/isp.c @@ -1748,7 +1748,7 @@ static int isp_register_entities(struct isp_device *isp) goto done; /* Register external entities */ - for (subdevs = pdata->subdevs; subdevs->subdevs; ++subdevs) { + for (subdevs = pdata->subdevs; subdevs && subdevs->subdevs; ++subdevs) { struct v4l2_subdev *sensor; struct media_entity *input; unsigned int flags; diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index 9d0dd08f57f8..e98d38212791 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -3046,6 +3046,8 @@ static void pvr2_subdev_update(struct pvr2_hdw *hdw) if (hdw->input_dirty || hdw->audiomode_dirty || hdw->force_dirty) { struct v4l2_tuner vt; memset(&vt, 0, sizeof(vt)); + vt.type = (hdw->input_val == PVR2_CVAL_INPUT_RADIO) ? + V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; vt.audmode = hdw->audiomode_val; v4l2_device_call_all(&hdw->v4l2_dev, 0, tuner, s_tuner, &vt); } @@ -5171,6 +5173,8 @@ void pvr2_hdw_status_poll(struct pvr2_hdw *hdw) { struct v4l2_tuner *vtp = &hdw->tuner_signal_info; memset(vtp, 0, sizeof(*vtp)); + vtp->type = (hdw->input_val == PVR2_CVAL_INPUT_RADIO) ? + V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; hdw->tuner_signal_stale = 0; /* Note: There apparently is no replacement for VIDIOC_CROPCAP using v4l2-subdev - therefore we can't support that AT ALL right diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c index 1593f8deb810..760b4de13adf 100644 --- a/drivers/media/video/pwc/pwc-ctrl.c +++ b/drivers/media/video/pwc/pwc-ctrl.c @@ -1414,7 +1414,7 @@ long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg) { ARG_DEF(struct pwc_probe, probe) - strcpy(ARGR(probe).name, pdev->vdev->name); + strcpy(ARGR(probe).name, pdev->vdev.name); ARGR(probe).type = pdev->type; ARG_OUT(probe) break; diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c index 356cd42b593b..b0bde5a87c8a 100644 --- a/drivers/media/video/pwc/pwc-if.c +++ b/drivers/media/video/pwc/pwc-if.c @@ -40,7 +40,7 @@ Oh yes, convention: to disctinguish between all the various pointers to device-structures, I use these names for the pointer variables: udev: struct usb_device * - vdev: struct video_device * + vdev: struct video_device (member of pwc_dev) pdev: struct pwc_devive * */ @@ -152,6 +152,7 @@ static ssize_t pwc_video_read(struct file *file, char __user *buf, size_t count, loff_t *ppos); static unsigned int pwc_video_poll(struct file *file, poll_table *wait); static int pwc_video_mmap(struct file *file, struct vm_area_struct *vma); +static void pwc_video_release(struct video_device *vfd); static const struct v4l2_file_operations pwc_fops = { .owner = THIS_MODULE, @@ -164,42 +165,12 @@ static const struct v4l2_file_operations pwc_fops = { }; static struct video_device pwc_template = { .name = "Philips Webcam", /* Filled in later */ - .release = video_device_release, + .release = pwc_video_release, .fops = &pwc_fops, + .ioctl_ops = &pwc_ioctl_ops, }; /***************************************************************************/ - -/* Okay, this is some magic that I worked out and the reasoning behind it... - - The biggest problem with any USB device is of course: "what to do - when the user unplugs the device while it is in use by an application?" - We have several options: - 1) Curse them with the 7 plagues when they do (requires divine intervention) - 2) Tell them not to (won't work: they'll do it anyway) - 3) Oops the kernel (this will have a negative effect on a user's uptime) - 4) Do something sensible. - - Of course, we go for option 4. - - It happens that this device will be linked to two times, once from - usb_device and once from the video_device in their respective 'private' - pointers. This is done when the device is probed() and all initialization - succeeded. The pwc_device struct links back to both structures. - - When a device is unplugged while in use it will be removed from the - list of known USB devices; I also de-register it as a V4L device, but - unfortunately I can't free the memory since the struct is still in use - by the file descriptor. This free-ing is then deferend until the first - opportunity. Crude, but it works. - - A small 'advantage' is that if a user unplugs the cam and plugs it back - in, it should get assigned the same video device minor, but unfortunately - it's non-trivial to re-link the cam back to the video device... (that - would surely be magic! :)) -*/ - -/***************************************************************************/ /* Private functions */ /* Here we want the physical address of the memory. @@ -1016,16 +987,15 @@ static ssize_t show_snapshot_button_status(struct device *class_dev, static DEVICE_ATTR(button, S_IRUGO | S_IWUSR, show_snapshot_button_status, NULL); -static int pwc_create_sysfs_files(struct video_device *vdev) +static int pwc_create_sysfs_files(struct pwc_device *pdev) { - struct pwc_device *pdev = video_get_drvdata(vdev); int rc; - rc = device_create_file(&vdev->dev, &dev_attr_button); + rc = device_create_file(&pdev->vdev.dev, &dev_attr_button); if (rc) goto err; if (pdev->features & FEATURE_MOTOR_PANTILT) { - rc = device_create_file(&vdev->dev, &dev_attr_pan_tilt); + rc = device_create_file(&pdev->vdev.dev, &dev_attr_pan_tilt); if (rc) goto err_button; } @@ -1033,19 +1003,17 @@ static int pwc_create_sysfs_files(struct video_device *vdev) return 0; err_button: - device_remove_file(&vdev->dev, &dev_attr_button); + device_remove_file(&pdev->vdev.dev, &dev_attr_button); err: PWC_ERROR("Could not create sysfs files.\n"); return rc; } -static void pwc_remove_sysfs_files(struct video_device *vdev) +static void pwc_remove_sysfs_files(struct pwc_device *pdev) { - struct pwc_device *pdev = video_get_drvdata(vdev); - if (pdev->features & FEATURE_MOTOR_PANTILT) - device_remove_file(&vdev->dev, &dev_attr_pan_tilt); - device_remove_file(&vdev->dev, &dev_attr_button); + device_remove_file(&pdev->vdev.dev, &dev_attr_pan_tilt); + device_remove_file(&pdev->vdev.dev, &dev_attr_button); } #ifdef CONFIG_USB_PWC_DEBUG @@ -1106,7 +1074,7 @@ static int pwc_video_open(struct file *file) if (ret >= 0) { PWC_DEBUG_OPEN("This %s camera is equipped with a %s (%d).\n", - pdev->vdev->name, + pdev->vdev.name, pwc_sensor_type_to_string(i), i); } } @@ -1180,16 +1148,15 @@ static int pwc_video_open(struct file *file) return 0; } - -static void pwc_cleanup(struct pwc_device *pdev) +static void pwc_video_release(struct video_device *vfd) { - pwc_remove_sysfs_files(pdev->vdev); - video_unregister_device(pdev->vdev); + struct pwc_device *pdev = container_of(vfd, struct pwc_device, vdev); + int hint; -#ifdef CONFIG_USB_PWC_INPUT_EVDEV - if (pdev->button_dev) - input_unregister_device(pdev->button_dev); -#endif + /* search device_hint[] table if we occupy a slot, by any chance */ + for (hint = 0; hint < MAX_DEV_HINTS; hint++) + if (device_hint[hint].pdev == pdev) + device_hint[hint].pdev = NULL; kfree(pdev); } @@ -1199,7 +1166,7 @@ static int pwc_video_close(struct file *file) { struct video_device *vdev = file->private_data; struct pwc_device *pdev; - int i, hint; + int i; PWC_DEBUG_OPEN(">> video_close called(vdev = 0x%p).\n", vdev); @@ -1234,12 +1201,6 @@ static int pwc_video_close(struct file *file) } pdev->vopen--; PWC_DEBUG_OPEN("<< video_close() vopen=%d\n", pdev->vopen); - } else { - pwc_cleanup(pdev); - /* search device_hint[] table if we occupy a slot, by any chance */ - for (hint = 0; hint < MAX_DEV_HINTS; hint++) - if (device_hint[hint].pdev == pdev) - device_hint[hint].pdev = NULL; } return 0; @@ -1715,19 +1676,12 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id init_waitqueue_head(&pdev->frameq); pdev->vcompression = pwc_preferred_compression; - /* Allocate video_device structure */ - pdev->vdev = video_device_alloc(); - if (!pdev->vdev) { - PWC_ERROR("Err, cannot allocate video_device struture. Failing probe."); - rc = -ENOMEM; - goto err_free_mem; - } - memcpy(pdev->vdev, &pwc_template, sizeof(pwc_template)); - pdev->vdev->parent = &intf->dev; - pdev->vdev->lock = &pdev->modlock; - pdev->vdev->ioctl_ops = &pwc_ioctl_ops; - strcpy(pdev->vdev->name, name); - video_set_drvdata(pdev->vdev, pdev); + /* Init video_device structure */ + memcpy(&pdev->vdev, &pwc_template, sizeof(pwc_template)); + pdev->vdev.parent = &intf->dev; + pdev->vdev.lock = &pdev->modlock; + strcpy(pdev->vdev.name, name); + video_set_drvdata(&pdev->vdev, pdev); pdev->release = le16_to_cpu(udev->descriptor.bcdDevice); PWC_DEBUG_PROBE("Release: %04x\n", pdev->release); @@ -1746,8 +1700,6 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id } } - pdev->vdev->release = video_device_release; - /* occupy slot */ if (hint < MAX_DEV_HINTS) device_hint[hint].pdev = pdev; @@ -1759,16 +1711,16 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id pwc_set_leds(pdev, 0, 0); pwc_camera_power(pdev, 0); - rc = video_register_device(pdev->vdev, VFL_TYPE_GRABBER, video_nr); + rc = video_register_device(&pdev->vdev, VFL_TYPE_GRABBER, video_nr); if (rc < 0) { PWC_ERROR("Failed to register as video device (%d).\n", rc); - goto err_video_release; + goto err_free_mem; } - rc = pwc_create_sysfs_files(pdev->vdev); + rc = pwc_create_sysfs_files(pdev); if (rc) goto err_video_unreg; - PWC_INFO("Registered as %s.\n", video_device_node_name(pdev->vdev)); + PWC_INFO("Registered as %s.\n", video_device_node_name(&pdev->vdev)); #ifdef CONFIG_USB_PWC_INPUT_EVDEV /* register webcam snapshot button input device */ @@ -1776,7 +1728,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id if (!pdev->button_dev) { PWC_ERROR("Err, insufficient memory for webcam snapshot button device."); rc = -ENOMEM; - pwc_remove_sysfs_files(pdev->vdev); + pwc_remove_sysfs_files(pdev); goto err_video_unreg; } @@ -1794,7 +1746,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id if (rc) { input_free_device(pdev->button_dev); pdev->button_dev = NULL; - pwc_remove_sysfs_files(pdev->vdev); + pwc_remove_sysfs_files(pdev); goto err_video_unreg; } #endif @@ -1804,10 +1756,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id err_video_unreg: if (hint < MAX_DEV_HINTS) device_hint[hint].pdev = NULL; - video_unregister_device(pdev->vdev); - pdev->vdev = NULL; /* So we don't try to release it below */ -err_video_release: - video_device_release(pdev->vdev); + video_unregister_device(&pdev->vdev); err_free_mem: kfree(pdev); return rc; @@ -1816,10 +1765,8 @@ err_free_mem: /* The user yanked out the cable... */ static void usb_pwc_disconnect(struct usb_interface *intf) { - struct pwc_device *pdev; - int hint; + struct pwc_device *pdev = usb_get_intfdata(intf); - pdev = usb_get_intfdata (intf); mutex_lock(&pdev->modlock); usb_set_intfdata (intf, NULL); if (pdev == NULL) { @@ -1836,30 +1783,25 @@ static void usb_pwc_disconnect(struct usb_interface *intf) } /* We got unplugged; this is signalled by an EPIPE error code */ - if (pdev->vopen) { - PWC_INFO("Disconnected while webcam is in use!\n"); - pdev->error_status = EPIPE; - } + pdev->error_status = EPIPE; + pdev->unplugged = 1; /* Alert waiting processes */ wake_up_interruptible(&pdev->frameq); - /* Wait until device is closed */ - if (pdev->vopen) { - pdev->unplugged = 1; - pwc_iso_stop(pdev); - } else { - /* Device is closed, so we can safely unregister it */ - PWC_DEBUG_PROBE("Unregistering video device in disconnect().\n"); -disconnect_out: - /* search device_hint[] table if we occupy a slot, by any chance */ - for (hint = 0; hint < MAX_DEV_HINTS; hint++) - if (device_hint[hint].pdev == pdev) - device_hint[hint].pdev = NULL; - } + /* No need to keep the urbs around after disconnection */ + pwc_isoc_cleanup(pdev); +disconnect_out: mutex_unlock(&pdev->modlock); - pwc_cleanup(pdev); + + pwc_remove_sysfs_files(pdev); + video_unregister_device(&pdev->vdev); + +#ifdef CONFIG_USB_PWC_INPUT_EVDEV + if (pdev->button_dev) + input_unregister_device(pdev->button_dev); +#endif } diff --git a/drivers/media/video/pwc/pwc.h b/drivers/media/video/pwc/pwc.h index e947766337d6..083f8b15df73 100644 --- a/drivers/media/video/pwc/pwc.h +++ b/drivers/media/video/pwc/pwc.h @@ -162,9 +162,9 @@ struct pwc_imgbuf struct pwc_device { - struct video_device *vdev; + struct video_device vdev; - /* Pointer to our usb_device */ + /* Pointer to our usb_device, may be NULL after unplug */ struct usb_device *udev; int type; /* type of cam (645, 646, 675, 680, 690, 720, 730, 740, 750) */ diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c index d142b40ea64e..81b4a826ee5e 100644 --- a/drivers/media/video/s5p-fimc/fimc-capture.c +++ b/drivers/media/video/s5p-fimc/fimc-capture.c @@ -1,7 +1,7 @@ /* - * Samsung S5P SoC series camera interface (camera capture) driver + * Samsung S5P/EXYNOS4 SoC series camera interface (camera capture) driver * - * Copyright (c) 2010 Samsung Electronics Co., Ltd + * Copyright (C) 2010 - 2011 Samsung Electronics Co., Ltd. * Author: Sylwester Nawrocki, <s.nawrocki@samsung.com> * * This program is free software; you can redistribute it and/or modify @@ -262,12 +262,7 @@ static unsigned int get_plane_size(struct fimc_frame *fr, unsigned int plane) { if (!fr || plane >= fr->fmt->memplanes) return 0; - - dbg("%s: w: %d. h: %d. depth[%d]: %d", - __func__, fr->width, fr->height, plane, fr->fmt->depth[plane]); - return fr->f_width * fr->f_height * fr->fmt->depth[plane] / 8; - } static int queue_setup(struct vb2_queue *vq, unsigned int *num_buffers, @@ -283,24 +278,14 @@ static int queue_setup(struct vb2_queue *vq, unsigned int *num_buffers, *num_planes = fmt->memplanes; - dbg("%s, buffer count=%d, plane count=%d", - __func__, *num_buffers, *num_planes); - for (i = 0; i < fmt->memplanes; i++) { sizes[i] = get_plane_size(&ctx->d_frame, i); - dbg("plane: %u, plane_size: %lu", i, sizes[i]); allocators[i] = ctx->fimc_dev->alloc_ctx; } return 0; } -static int buffer_init(struct vb2_buffer *vb) -{ - /* TODO: */ - return 0; -} - static int buffer_prepare(struct vb2_buffer *vb) { struct vb2_queue *vq = vb->vb2_queue; @@ -380,7 +365,6 @@ static struct vb2_ops fimc_capture_qops = { .queue_setup = queue_setup, .buf_prepare = buffer_prepare, .buf_queue = buffer_queue, - .buf_init = buffer_init, .wait_prepare = fimc_unlock, .wait_finish = fimc_lock, .start_streaming = start_streaming, @@ -903,6 +887,7 @@ err_vd_reg: err_v4l2_reg: v4l2_device_unregister(v4l2_dev); err_info: + kfree(ctx); dev_err(&fimc->pdev->dev, "failed to install\n"); return ret; } diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c index dc91a8511af6..bdf19ada9172 100644 --- a/drivers/media/video/s5p-fimc/fimc-core.c +++ b/drivers/media/video/s5p-fimc/fimc-core.c @@ -1,9 +1,8 @@ /* - * S5P camera interface (video postprocessor) driver + * Samsung S5P/EXYNOS4 SoC series camera interface (video postprocessor) driver * - * Copyright (c) 2010 Samsung Electronics Co., Ltd - * - * Sylwester Nawrocki, <s.nawrocki@samsung.com> + * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd. + * Contact: Sylwester Nawrocki, <s.nawrocki@samsung.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published @@ -42,7 +41,6 @@ static struct fimc_fmt fimc_formats[] = { .color = S5P_FIMC_RGB565, .memplanes = 1, .colplanes = 1, - .mbus_code = V4L2_MBUS_FMT_RGB565_2X8_BE, .flags = FMT_FLAGS_M2M, }, { .name = "BGR666", @@ -232,11 +230,7 @@ static int fimc_get_scaler_factor(u32 src, u32 tar, u32 *ratio, u32 *shift) return 0; } } - *shift = 0, *ratio = 1; - - dbg("s: %d, t: %d, shift: %d, ratio: %d", - src, tar, *shift, *ratio); return 0; } @@ -268,10 +262,8 @@ int fimc_set_scaler_info(struct fimc_ctx *ctx) err("invalid source size: %d x %d", sx, sy); return -EINVAL; } - sc->real_width = sx; sc->real_height = sy; - dbg("sx= %d, sy= %d, tx= %d, ty= %d", sx, sy, tx, ty); ret = fimc_get_scaler_factor(sx, tx, &sc->pre_hratio, &sc->hfactor); if (ret) @@ -711,22 +703,18 @@ static int fimc_queue_setup(struct vb2_queue *vq, unsigned int *num_buffers, f = ctx_get_frame(ctx, vq->type); if (IS_ERR(f)) return PTR_ERR(f); - /* * Return number of non-contigous planes (plane buffers) * depending on the configured color format. */ - if (f->fmt) - *num_planes = f->fmt->memplanes; + if (!f->fmt) + return -EINVAL; + *num_planes = f->fmt->memplanes; for (i = 0; i < f->fmt->memplanes; i++) { - sizes[i] = (f->width * f->height * f->fmt->depth[i]) >> 3; + sizes[i] = (f->f_width * f->f_height * f->fmt->depth[i]) / 8; allocators[i] = ctx->fimc_dev->alloc_ctx; } - - if (*num_buffers == 0) - *num_buffers = 1; - return 0; } @@ -852,7 +840,7 @@ struct fimc_fmt *find_format(struct v4l2_format *f, unsigned int mask) for (i = 0; i < ARRAY_SIZE(fimc_formats); ++i) { fmt = &fimc_formats[i]; - if (fmt->fourcc == f->fmt.pix.pixelformat && + if (fmt->fourcc == f->fmt.pix_mp.pixelformat && (fmt->flags & mask)) break; } diff --git a/drivers/media/video/s5p-fimc/fimc-core.h b/drivers/media/video/s5p-fimc/fimc-core.h index 3beb1e5320ce..1f70772daaf0 100644 --- a/drivers/media/video/s5p-fimc/fimc-core.h +++ b/drivers/media/video/s5p-fimc/fimc-core.h @@ -1,7 +1,5 @@ /* - * Copyright (c) 2010 Samsung Electronics - * - * Sylwester Nawrocki, <s.nawrocki@samsung.com> + * Copyright (C) 2010 - 2011 Samsung Electronics Co., Ltd. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -135,9 +133,10 @@ enum fimc_color_fmt { * @name: format description * @fourcc: the fourcc code for this format, 0 if not applicable * @color: the corresponding fimc_color_fmt - * @depth: per plane driver's private 'number of bits per pixel' * @memplanes: number of physically non-contiguous data planes * @colplanes: number of physically contiguous data planes + * @depth: per plane driver's private 'number of bits per pixel' + * @flags: flags indicating which operation mode format applies to */ struct fimc_fmt { enum v4l2_mbus_pixelcode mbus_code; @@ -171,7 +170,7 @@ struct fimc_dma_offset { }; /** - * struct fimc_effect - the configuration data for the "Arbitrary" image effect + * struct fimc_effect - color effect information * @type: effect type * @pat_cb: cr value when type is "arbitrary" * @pat_cr: cr value when type is "arbitrary" @@ -184,7 +183,6 @@ struct fimc_effect { /** * struct fimc_scaler - the configuration data for FIMC inetrnal scaler - * * @scaleup_h: flag indicating scaling up horizontally * @scaleup_v: flag indicating scaling up vertically * @copy_mode: flag indicating transparent DMA transfer (no scaling @@ -220,7 +218,6 @@ struct fimc_scaler { /** * struct fimc_addr - the FIMC physical address set for DMA - * * @y: luminance plane physical address * @cb: Cb plane physical address * @cr: Cr plane physical address @@ -234,6 +231,7 @@ struct fimc_addr { /** * struct fimc_vid_buffer - the driver's video buffer * @vb: v4l videobuf buffer + * @list: linked list structure for buffer queue * @paddr: precalculated physical address set * @index: buffer index for the output DMA engine */ @@ -254,11 +252,10 @@ struct fimc_vid_buffer { * @offs_v: image vertical pixel offset * @width: image pixel width * @height: image pixel weight - * @paddr: image frame buffer physical addresses - * @buf_cnt: number of buffers depending on a color format * @payload: image size in bytes (w x h x bpp) - * @color: color format + * @paddr: image frame buffer physical addresses * @dma_offset: DMA offset in bytes + * @fmt: fimc color format pointer */ struct fimc_frame { u32 f_width; @@ -390,21 +387,22 @@ struct fimc_ctx; /** * struct fimc_dev - abstraction for FIMC entity - * * @slock: the spinlock protecting this data structure * @lock: the mutex protecting this data structure * @pdev: pointer to the FIMC platform device * @pdata: pointer to the device platform data + * @variant: the IP variant information * @id: FIMC device index (0..FIMC_MAX_DEVS) * @num_clocks: the number of clocks managed by this device instance - * @clock[]: the clocks required for FIMC operation + * @clock: clocks required for FIMC operation * @regs: the mapped hardware registers * @regs_res: the resource claimed for IO registers - * @irq: interrupt number of the FIMC subdevice - * @irq_queue: + * @irq: FIMC interrupt number + * @irq_queue: interrupt handler waitqueue * @m2m: memory-to-memory V4L2 device information * @vid_cap: camera capture device information * @state: flags used to synchronize m2m and capture mode operation + * @alloc_ctx: videobuf2 memory allocator context */ struct fimc_dev { spinlock_t slock; @@ -427,8 +425,7 @@ struct fimc_dev { /** * fimc_ctx - the device context data - * - * @lock: mutex protecting this data structure + * @slock: spinlock protecting this data structure * @s_frame: source frame properties * @d_frame: destination frame properties * @out_order_1p: output 1-plane YCBCR order diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index ff6c0e97563e..d4ee24bf6928 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -963,7 +963,7 @@ static int saa7134_raw_decode_irq(struct saa7134_dev *dev) * to work with other protocols. */ if (!ir->active) { - timeout = jiffies + jiffies_to_msecs(15); + timeout = jiffies + msecs_to_jiffies(15); mod_timer(&ir->timer, timeout); ir->active = true; } diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 9363ed91a4cb..cfa9f7efe93d 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -724,19 +724,15 @@ static inline int check_mode(struct tuner *t, enum v4l2_tuner_type mode) } /** - * set_mode_freq - Switch tuner to other mode. - * @client: struct i2c_client pointer + * set_mode - Switch tuner to other mode. * @t: a pointer to the module's internal struct_tuner * @mode: enum v4l2_type (radio or TV) - * @freq: frequency to set (0 means to use the previous one) * * If tuner doesn't support the needed mode (radio or TV), prints a * debug message and returns -EINVAL, changing its state to standby. - * Otherwise, changes the state and sets frequency to the last value, if - * the tuner can sleep or if it supports both Radio and TV. + * Otherwise, changes the mode and returns 0. */ -static int set_mode_freq(struct i2c_client *client, struct tuner *t, - enum v4l2_tuner_type mode, unsigned int freq) +static int set_mode(struct tuner *t, enum v4l2_tuner_type mode) { struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; @@ -752,17 +748,27 @@ static int set_mode_freq(struct i2c_client *client, struct tuner *t, t->mode = mode; tuner_dbg("Changing to mode %d\n", mode); } + return 0; +} + +/** + * set_freq - Set the tuner to the desired frequency. + * @t: a pointer to the module's internal struct_tuner + * @freq: frequency to set (0 means to use the current frequency) + */ +static void set_freq(struct tuner *t, unsigned int freq) +{ + struct i2c_client *client = v4l2_get_subdevdata(&t->sd); + if (t->mode == V4L2_TUNER_RADIO) { - if (freq) - t->radio_freq = freq; - set_radio_freq(client, t->radio_freq); + if (!freq) + freq = t->radio_freq; + set_radio_freq(client, freq); } else { - if (freq) - t->tv_freq = freq; - set_tv_freq(client, t->tv_freq); + if (!freq) + freq = t->tv_freq; + set_tv_freq(client, freq); } - - return 0; } /* @@ -817,7 +823,8 @@ static void set_tv_freq(struct i2c_client *c, unsigned int freq) /** * tuner_fixup_std - force a given video standard variant * - * @t: tuner internal struct + * @t: tuner internal struct + * @std: TV standard * * A few devices or drivers have problem to detect some standard variations. * On other operational systems, the drivers generally have a per-country @@ -827,57 +834,39 @@ static void set_tv_freq(struct i2c_client *c, unsigned int freq) * to distinguish all video standard variations, a modprobe parameter can * be used to force a video standard match. */ -static int tuner_fixup_std(struct tuner *t) +static v4l2_std_id tuner_fixup_std(struct tuner *t, v4l2_std_id std) { - if ((t->std & V4L2_STD_PAL) == V4L2_STD_PAL) { + if (pal[0] != '-' && (std & V4L2_STD_PAL) == V4L2_STD_PAL) { switch (pal[0]) { case '6': - tuner_dbg("insmod fixup: PAL => PAL-60\n"); - t->std = V4L2_STD_PAL_60; - break; + return V4L2_STD_PAL_60; case 'b': case 'B': case 'g': case 'G': - tuner_dbg("insmod fixup: PAL => PAL-BG\n"); - t->std = V4L2_STD_PAL_BG; - break; + return V4L2_STD_PAL_BG; case 'i': case 'I': - tuner_dbg("insmod fixup: PAL => PAL-I\n"); - t->std = V4L2_STD_PAL_I; - break; + return V4L2_STD_PAL_I; case 'd': case 'D': case 'k': case 'K': - tuner_dbg("insmod fixup: PAL => PAL-DK\n"); - t->std = V4L2_STD_PAL_DK; - break; + return V4L2_STD_PAL_DK; case 'M': case 'm': - tuner_dbg("insmod fixup: PAL => PAL-M\n"); - t->std = V4L2_STD_PAL_M; - break; + return V4L2_STD_PAL_M; case 'N': case 'n': - if (pal[1] == 'c' || pal[1] == 'C') { - tuner_dbg("insmod fixup: PAL => PAL-Nc\n"); - t->std = V4L2_STD_PAL_Nc; - } else { - tuner_dbg("insmod fixup: PAL => PAL-N\n"); - t->std = V4L2_STD_PAL_N; - } - break; - case '-': - /* default parameter, do nothing */ - break; + if (pal[1] == 'c' || pal[1] == 'C') + return V4L2_STD_PAL_Nc; + return V4L2_STD_PAL_N; default: tuner_warn("pal= argument not recognised\n"); break; } } - if ((t->std & V4L2_STD_SECAM) == V4L2_STD_SECAM) { + if (secam[0] != '-' && (std & V4L2_STD_SECAM) == V4L2_STD_SECAM) { switch (secam[0]) { case 'b': case 'B': @@ -885,63 +874,42 @@ static int tuner_fixup_std(struct tuner *t) case 'G': case 'h': case 'H': - tuner_dbg("insmod fixup: SECAM => SECAM-BGH\n"); - t->std = V4L2_STD_SECAM_B | - V4L2_STD_SECAM_G | - V4L2_STD_SECAM_H; - break; + return V4L2_STD_SECAM_B | + V4L2_STD_SECAM_G | + V4L2_STD_SECAM_H; case 'd': case 'D': case 'k': case 'K': - tuner_dbg("insmod fixup: SECAM => SECAM-DK\n"); - t->std = V4L2_STD_SECAM_DK; - break; + return V4L2_STD_SECAM_DK; case 'l': case 'L': - if ((secam[1] == 'C') || (secam[1] == 'c')) { - tuner_dbg("insmod fixup: SECAM => SECAM-L'\n"); - t->std = V4L2_STD_SECAM_LC; - } else { - tuner_dbg("insmod fixup: SECAM => SECAM-L\n"); - t->std = V4L2_STD_SECAM_L; - } - break; - case '-': - /* default parameter, do nothing */ - break; + if ((secam[1] == 'C') || (secam[1] == 'c')) + return V4L2_STD_SECAM_LC; + return V4L2_STD_SECAM_L; default: tuner_warn("secam= argument not recognised\n"); break; } } - if ((t->std & V4L2_STD_NTSC) == V4L2_STD_NTSC) { + if (ntsc[0] != '-' && (std & V4L2_STD_NTSC) == V4L2_STD_NTSC) { switch (ntsc[0]) { case 'm': case 'M': - tuner_dbg("insmod fixup: NTSC => NTSC-M\n"); - t->std = V4L2_STD_NTSC_M; - break; + return V4L2_STD_NTSC_M; case 'j': case 'J': - tuner_dbg("insmod fixup: NTSC => NTSC_M_JP\n"); - t->std = V4L2_STD_NTSC_M_JP; - break; + return V4L2_STD_NTSC_M_JP; case 'k': case 'K': - tuner_dbg("insmod fixup: NTSC => NTSC_M_KR\n"); - t->std = V4L2_STD_NTSC_M_KR; - break; - case '-': - /* default parameter, do nothing */ - break; + return V4L2_STD_NTSC_M_KR; default: tuner_info("ntsc= argument not recognised\n"); break; } } - return 0; + return std; } /* @@ -1058,10 +1026,9 @@ static void tuner_status(struct dvb_frontend *fe) static int tuner_s_radio(struct v4l2_subdev *sd) { struct tuner *t = to_tuner(sd); - struct i2c_client *client = v4l2_get_subdevdata(sd); - if (set_mode_freq(client, t, V4L2_TUNER_RADIO, 0) == -EINVAL) - return 0; + if (set_mode(t, V4L2_TUNER_RADIO) == 0) + set_freq(t, 0); return 0; } @@ -1072,16 +1039,20 @@ static int tuner_s_radio(struct v4l2_subdev *sd) /** * tuner_s_power - controls the power state of the tuner * @sd: pointer to struct v4l2_subdev - * @on: a zero value puts the tuner to sleep + * @on: a zero value puts the tuner to sleep, non-zero wakes it up */ static int tuner_s_power(struct v4l2_subdev *sd, int on) { struct tuner *t = to_tuner(sd); struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops; - /* FIXME: Why this function don't wake the tuner if on != 0 ? */ - if (on) + if (on) { + if (t->standby && set_mode(t, t->mode) == 0) { + tuner_dbg("Waking up tuner\n"); + set_freq(t, 0); + } return 0; + } tuner_dbg("Putting tuner to sleep\n"); t->standby = true; @@ -1093,28 +1064,36 @@ static int tuner_s_power(struct v4l2_subdev *sd, int on) static int tuner_s_std(struct v4l2_subdev *sd, v4l2_std_id std) { struct tuner *t = to_tuner(sd); - struct i2c_client *client = v4l2_get_subdevdata(sd); - if (set_mode_freq(client, t, V4L2_TUNER_ANALOG_TV, 0) == -EINVAL) + if (set_mode(t, V4L2_TUNER_ANALOG_TV)) return 0; - t->std = std; - tuner_fixup_std(t); - + t->std = tuner_fixup_std(t, std); + if (t->std != std) + tuner_dbg("Fixup standard %llx to %llx\n", std, t->std); + set_freq(t, 0); return 0; } static int tuner_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f) { struct tuner *t = to_tuner(sd); - struct i2c_client *client = v4l2_get_subdevdata(sd); - - if (set_mode_freq(client, t, f->type, f->frequency) == -EINVAL) - return 0; + if (set_mode(t, f->type) == 0) + set_freq(t, f->frequency); return 0; } +/** + * tuner_g_frequency - Get the tuned frequency for the tuner + * @sd: pointer to struct v4l2_subdev + * @f: pointer to struct v4l2_frequency + * + * At return, the structure f will be filled with tuner frequency + * if the tuner matches the f->type. + * Note: f->type should be initialized before calling it. + * This is done by either video_ioctl2 or by the bridge driver. + */ static int tuner_g_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f) { struct tuner *t = to_tuner(sd); @@ -1122,8 +1101,7 @@ static int tuner_g_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f) if (check_mode(t, f->type) == -EINVAL) return 0; - f->type = t->mode; - if (fe_tuner_ops->get_frequency && !t->standby) { + if (f->type == t->mode && fe_tuner_ops->get_frequency && !t->standby) { u32 abs_freq; fe_tuner_ops->get_frequency(&t->fe, &abs_freq); @@ -1131,12 +1109,22 @@ static int tuner_g_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f) DIV_ROUND_CLOSEST(abs_freq * 2, 125) : DIV_ROUND_CLOSEST(abs_freq, 62500); } else { - f->frequency = (V4L2_TUNER_RADIO == t->mode) ? + f->frequency = (V4L2_TUNER_RADIO == f->type) ? t->radio_freq : t->tv_freq; } return 0; } +/** + * tuner_g_tuner - Fill in tuner information + * @sd: pointer to struct v4l2_subdev + * @vt: pointer to struct v4l2_tuner + * + * At return, the structure vt will be filled with tuner information + * if the tuner matches vt->type. + * Note: vt->type should be initialized before calling it. + * This is done by either video_ioctl2 or by the bridge driver. + */ static int tuner_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) { struct tuner *t = to_tuner(sd); @@ -1145,48 +1133,58 @@ static int tuner_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) if (check_mode(t, vt->type) == -EINVAL) return 0; - vt->type = t->mode; - if (analog_ops->get_afc) + if (vt->type == t->mode && analog_ops->get_afc) vt->afc = analog_ops->get_afc(&t->fe); - if (t->mode == V4L2_TUNER_ANALOG_TV) + if (vt->type == V4L2_TUNER_ANALOG_TV) vt->capability |= V4L2_TUNER_CAP_NORM; - if (t->mode != V4L2_TUNER_RADIO) { + if (vt->type != V4L2_TUNER_RADIO) { vt->rangelow = tv_range[0] * 16; vt->rangehigh = tv_range[1] * 16; return 0; } /* radio mode */ - vt->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; - if (fe_tuner_ops->get_status) { - u32 tuner_status; - - fe_tuner_ops->get_status(&t->fe, &tuner_status); - vt->rxsubchans = - (tuner_status & TUNER_STATUS_STEREO) ? - V4L2_TUNER_SUB_STEREO : - V4L2_TUNER_SUB_MONO; + if (vt->type == t->mode) { + vt->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; + if (fe_tuner_ops->get_status) { + u32 tuner_status; + + fe_tuner_ops->get_status(&t->fe, &tuner_status); + vt->rxsubchans = + (tuner_status & TUNER_STATUS_STEREO) ? + V4L2_TUNER_SUB_STEREO : + V4L2_TUNER_SUB_MONO; + } + if (analog_ops->has_signal) + vt->signal = analog_ops->has_signal(&t->fe); + vt->audmode = t->audmode; } - if (analog_ops->has_signal) - vt->signal = analog_ops->has_signal(&t->fe); vt->capability |= V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO; - vt->audmode = t->audmode; vt->rangelow = radio_range[0] * 16000; vt->rangehigh = radio_range[1] * 16000; return 0; } +/** + * tuner_s_tuner - Set the tuner's audio mode + * @sd: pointer to struct v4l2_subdev + * @vt: pointer to struct v4l2_tuner + * + * Sets the audio mode if the tuner matches vt->type. + * Note: vt->type should be initialized before calling it. + * This is done by either video_ioctl2 or by the bridge driver. + */ static int tuner_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) { struct tuner *t = to_tuner(sd); - struct i2c_client *client = v4l2_get_subdevdata(sd); - if (set_mode_freq(client, t, vt->type, 0) == -EINVAL) + if (set_mode(t, vt->type)) return 0; if (t->mode == V4L2_TUNER_RADIO) t->audmode = vt->audmode; + set_freq(t, 0); return 0; } @@ -1221,7 +1219,8 @@ static int tuner_resume(struct i2c_client *c) tuner_dbg("resume\n"); if (!t->standby) - set_mode_freq(c, t, t->type, 0); + if (set_mode(t, t->mode) == 0) + set_freq(t, 0); return 0; } diff --git a/drivers/media/video/uvc/uvc_entity.c b/drivers/media/video/uvc/uvc_entity.c index c3ab0c813be2..48fea373c25a 100644 --- a/drivers/media/video/uvc/uvc_entity.c +++ b/drivers/media/video/uvc/uvc_entity.c @@ -27,14 +27,20 @@ static int uvc_mc_register_entity(struct uvc_video_chain *chain, struct uvc_entity *entity) { const u32 flags = MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE; - struct uvc_entity *remote; + struct media_entity *sink; unsigned int i; - u8 remote_pad; - int ret = 0; + int ret; + + sink = (UVC_ENTITY_TYPE(entity) == UVC_TT_STREAMING) + ? (entity->vdev ? &entity->vdev->entity : NULL) + : &entity->subdev.entity; + if (sink == NULL) + return 0; for (i = 0; i < entity->num_pads; ++i) { struct media_entity *source; - struct media_entity *sink; + struct uvc_entity *remote; + u8 remote_pad; if (!(entity->pads[i].flags & MEDIA_PAD_FL_SINK)) continue; @@ -43,10 +49,11 @@ static int uvc_mc_register_entity(struct uvc_video_chain *chain, if (remote == NULL) return -EINVAL; - source = (UVC_ENTITY_TYPE(remote) == UVC_TT_STREAMING) - ? &remote->vdev->entity : &remote->subdev.entity; - sink = (UVC_ENTITY_TYPE(entity) == UVC_TT_STREAMING) - ? &entity->vdev->entity : &entity->subdev.entity; + source = (UVC_ENTITY_TYPE(remote) != UVC_TT_STREAMING) + ? (remote->vdev ? &remote->vdev->entity : NULL) + : &remote->subdev.entity; + if (source == NULL) + continue; remote_pad = remote->num_pads - 1; ret = media_entity_create_link(source, remote_pad, @@ -55,11 +62,10 @@ static int uvc_mc_register_entity(struct uvc_video_chain *chain, return ret; } - if (UVC_ENTITY_TYPE(entity) != UVC_TT_STREAMING) - ret = v4l2_device_register_subdev(&chain->dev->vdev, - &entity->subdev); + if (UVC_ENTITY_TYPE(entity) == UVC_TT_STREAMING) + return 0; - return ret; + return v4l2_device_register_subdev(&chain->dev->vdev, &entity->subdev); } static struct v4l2_subdev_ops uvc_subdev_ops = { @@ -84,9 +90,11 @@ static int uvc_mc_init_entity(struct uvc_entity *entity) ret = media_entity_init(&entity->subdev.entity, entity->num_pads, entity->pads, 0); - } else + } else if (entity->vdev != NULL) { ret = media_entity_init(&entity->vdev->entity, entity->num_pads, entity->pads, 0); + } else + ret = 0; return ret; } diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c index 109a06384a8f..f90ce9fce539 100644 --- a/drivers/media/video/uvc/uvc_queue.c +++ b/drivers/media/video/uvc/uvc_queue.c @@ -104,6 +104,8 @@ static int __uvc_free_buffers(struct uvc_video_queue *queue) } if (queue->count) { + uvc_queue_cancel(queue, 0); + INIT_LIST_HEAD(&queue->mainqueue); vfree(queue->mem); queue->count = 0; } diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index fc766b9f24c5..49994793cc77 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -1255,8 +1255,10 @@ int uvc_video_enable(struct uvc_streaming *stream, int enable) /* Commit the streaming parameters. */ ret = uvc_commit_video(stream, &stream->ctrl); - if (ret < 0) + if (ret < 0) { + uvc_queue_enable(&stream->queue, 0); return ret; + } return uvc_init_video(stream, GFP_KERNEL); } diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 19d5ae293780..06f14008b346 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -167,6 +167,12 @@ static void v4l2_device_release(struct device *cd) mutex_unlock(&videodev_lock); +#if defined(CONFIG_MEDIA_CONTROLLER) + if (vdev->v4l2_dev && vdev->v4l2_dev->mdev && + vdev->vfl_type != VFL_TYPE_SUBDEV) + media_device_unregister_entity(&vdev->entity); +#endif + /* Release video_device and perform other cleanups as needed. */ vdev->release(vdev); @@ -389,9 +395,6 @@ static int v4l2_mmap(struct file *filp, struct vm_area_struct *vm) static int v4l2_open(struct inode *inode, struct file *filp) { struct video_device *vdev; -#if defined(CONFIG_MEDIA_CONTROLLER) - struct media_entity *entity = NULL; -#endif int ret = 0; /* Check if the video device is available */ @@ -405,17 +408,6 @@ static int v4l2_open(struct inode *inode, struct file *filp) /* and increase the device refcount */ video_get(vdev); mutex_unlock(&videodev_lock); -#if defined(CONFIG_MEDIA_CONTROLLER) - if (vdev->v4l2_dev && vdev->v4l2_dev->mdev && - vdev->vfl_type != VFL_TYPE_SUBDEV) { - entity = media_entity_get(&vdev->entity); - if (!entity) { - ret = -EBUSY; - video_put(vdev); - return ret; - } - } -#endif if (vdev->fops->open) { if (vdev->lock && mutex_lock_interruptible(vdev->lock)) { ret = -ERESTARTSYS; @@ -431,14 +423,8 @@ static int v4l2_open(struct inode *inode, struct file *filp) err: /* decrease the refcount in case of an error */ - if (ret) { -#if defined(CONFIG_MEDIA_CONTROLLER) - if (vdev->v4l2_dev && vdev->v4l2_dev->mdev && - vdev->vfl_type != VFL_TYPE_SUBDEV) - media_entity_put(entity); -#endif + if (ret) video_put(vdev); - } return ret; } @@ -455,11 +441,6 @@ static int v4l2_release(struct inode *inode, struct file *filp) if (vdev->lock) mutex_unlock(vdev->lock); } -#if defined(CONFIG_MEDIA_CONTROLLER) - if (vdev->v4l2_dev && vdev->v4l2_dev->mdev && - vdev->vfl_type != VFL_TYPE_SUBDEV) - media_entity_put(&vdev->entity); -#endif /* decrease the refcount unconditionally since the release() return value is ignored. */ video_put(vdev); @@ -754,12 +735,6 @@ void video_unregister_device(struct video_device *vdev) if (!vdev || !video_is_registered(vdev)) return; -#if defined(CONFIG_MEDIA_CONTROLLER) - if (vdev->v4l2_dev && vdev->v4l2_dev->mdev && - vdev->vfl_type != VFL_TYPE_SUBDEV) - media_device_unregister_entity(&vdev->entity); -#endif - mutex_lock(&videodev_lock); /* This must be in a critical section to prevent a race with v4l2_open. * Once this bit has been cleared video_get may never be called again. diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c index 506edcc2ddeb..69e8c6ffcc49 100644 --- a/drivers/media/video/v4l2-ioctl.c +++ b/drivers/media/video/v4l2-ioctl.c @@ -1822,6 +1822,8 @@ static long __video_do_ioctl(struct file *file, if (!ops->vidioc_g_tuner) break; + p->type = (vfd->vfl_type == VFL_TYPE_RADIO) ? + V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; ret = ops->vidioc_g_tuner(file, fh, p); if (!ret) dbgarg(cmd, "index=%d, name=%s, type=%d, " @@ -1840,6 +1842,8 @@ static long __video_do_ioctl(struct file *file, if (!ops->vidioc_s_tuner) break; + p->type = (vfd->vfl_type == VFL_TYPE_RADIO) ? + V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; dbgarg(cmd, "index=%d, name=%s, type=%d, " "capability=0x%x, rangelow=%d, " "rangehigh=%d, signal=%d, afc=%d, " @@ -1858,6 +1862,8 @@ static long __video_do_ioctl(struct file *file, if (!ops->vidioc_g_frequency) break; + p->type = (vfd->vfl_type == VFL_TYPE_RADIO) ? + V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; ret = ops->vidioc_g_frequency(file, fh, p); if (!ret) dbgarg(cmd, "tuner=%d, type=%d, frequency=%d\n", @@ -1940,13 +1946,19 @@ static long __video_do_ioctl(struct file *file, case VIDIOC_S_HW_FREQ_SEEK: { struct v4l2_hw_freq_seek *p = arg; + enum v4l2_tuner_type type; if (!ops->vidioc_s_hw_freq_seek) break; + type = (vfd->vfl_type == VFL_TYPE_RADIO) ? + V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; dbgarg(cmd, - "tuner=%d, type=%d, seek_upward=%d, wrap_around=%d\n", - p->tuner, p->type, p->seek_upward, p->wrap_around); - ret = ops->vidioc_s_hw_freq_seek(file, fh, p); + "tuner=%u, type=%u, seek_upward=%u, wrap_around=%u, spacing=%u\n", + p->tuner, p->type, p->seek_upward, p->wrap_around, p->spacing); + if (p->type != type) + ret = -EINVAL; + else + ret = ops->vidioc_s_hw_freq_seek(file, fh, p); break; } case VIDIOC_ENUM_FRAMESIZES: diff --git a/drivers/media/video/videobuf2-core.c b/drivers/media/video/videobuf2-core.c index 6ba1461d51ef..3015e6000946 100644 --- a/drivers/media/video/videobuf2-core.c +++ b/drivers/media/video/videobuf2-core.c @@ -492,13 +492,6 @@ int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req) return -EINVAL; } - /* - * If the same number of buffers and memory access method is requested - * then return immediately. - */ - if (q->memory == req->memory && req->count == q->num_buffers) - return 0; - if (req->count == 0 || q->num_buffers != 0 || q->memory != req->memory) { /* * We already have buffers allocated, so first check if they @@ -539,9 +532,9 @@ int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req) /* Finally, allocate buffers and video memory */ ret = __vb2_queue_alloc(q, req->memory, num_buffers, num_planes, plane_sizes); - if (ret < 0) { - dprintk(1, "Memory allocation failed with error: %d\n", ret); - return ret; + if (ret == 0) { + dprintk(1, "Memory allocation failed\n"); + return -ENOMEM; } /* @@ -1196,6 +1189,7 @@ static void __vb2_queue_cancel(struct vb2_queue *q) * has not already dequeued before initiating cancel. */ INIT_LIST_HEAD(&q->done_list); + atomic_set(&q->queued_count, 0); wake_up_all(&q->done_wq); /* diff --git a/drivers/media/video/videobuf2-dma-sg.c b/drivers/media/video/videobuf2-dma-sg.c index b2d9485aac75..10a20d9509d9 100644 --- a/drivers/media/video/videobuf2-dma-sg.c +++ b/drivers/media/video/videobuf2-dma-sg.c @@ -62,7 +62,7 @@ static void *vb2_dma_sg_alloc(void *alloc_ctx, unsigned long size) goto fail_pages_array_alloc; for (i = 0; i < buf->sg_desc.num_pages; ++i) { - buf->pages[i] = alloc_page(GFP_KERNEL | __GFP_ZERO); + buf->pages[i] = alloc_page(GFP_KERNEL | __GFP_ZERO | __GFP_NOWARN); if (NULL == buf->pages[i]) goto fail_pages_alloc; sg_set_page(&buf->sg_desc.sglist[i], diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 0f09c057e796..6ca938a6bf94 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -728,6 +728,9 @@ config MFD_TPS65910 if you say yes here you get support for the TPS65910 series of Power Management chips. +config TPS65911_COMPARATOR + tristate + endif # MFD_SUPPORT menu "Multimedia Capabilities Port drivers" diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index efe3cc33ed92..d7d47d2a4c76 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -94,3 +94,4 @@ obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o obj-$(CONFIG_MFD_TPS65910) += tps65910.o tps65910-irq.o +obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c index c27fd1fc3b86..c71ae09430c5 100644 --- a/drivers/mfd/asic3.c +++ b/drivers/mfd/asic3.c @@ -619,6 +619,7 @@ static void asic3_clk_disable(struct asic3 *asic, struct asic3_clk *clk) /* MFD cells (SPI, PWM, LED, DS1WM, MMC) */ static struct ds1wm_driver_data ds1wm_pdata = { .active_high = 1, + .reset_recover_delay = 1, }; static struct resource ds1wm_resources[] = { diff --git a/drivers/mfd/htc-pasic3.c b/drivers/mfd/htc-pasic3.c index 2808bd125d13..04c7093d6499 100644 --- a/drivers/mfd/htc-pasic3.c +++ b/drivers/mfd/htc-pasic3.c @@ -99,6 +99,7 @@ static int ds1wm_disable(struct platform_device *pdev) static struct ds1wm_driver_data ds1wm_pdata = { .active_high = 0, + .reset_recover_delay = 1, }; static struct resource ds1wm_resources[] __initdata = { diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 855219526ccb..1717144fe7f4 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -26,7 +26,6 @@ #include <linux/spinlock.h> #include <linux/gpio.h> #include <plat/usb.h> -#include <linux/pm_runtime.h> #define USBHS_DRIVER_NAME "usbhs-omap" #define OMAP_EHCI_DEVICE "ehci-omap" @@ -147,6 +146,9 @@ struct usbhs_hcd_omap { + struct clk *usbhost_ick; + struct clk *usbhost_hs_fck; + struct clk *usbhost_fs_fck; struct clk *xclk60mhsp1_ck; struct clk *xclk60mhsp2_ck; struct clk *utmi_p1_fck; @@ -156,6 +158,8 @@ struct usbhs_hcd_omap { struct clk *usbhost_p2_fck; struct clk *usbtll_p2_fck; struct clk *init_60m_fclk; + struct clk *usbtll_fck; + struct clk *usbtll_ick; void __iomem *uhh_base; void __iomem *tll_base; @@ -349,13 +353,46 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev) omap->platdata.ehci_data = pdata->ehci_data; omap->platdata.ohci_data = pdata->ohci_data; - pm_runtime_enable(&pdev->dev); + omap->usbhost_ick = clk_get(dev, "usbhost_ick"); + if (IS_ERR(omap->usbhost_ick)) { + ret = PTR_ERR(omap->usbhost_ick); + dev_err(dev, "usbhost_ick failed error:%d\n", ret); + goto err_end; + } + + omap->usbhost_hs_fck = clk_get(dev, "hs_fck"); + if (IS_ERR(omap->usbhost_hs_fck)) { + ret = PTR_ERR(omap->usbhost_hs_fck); + dev_err(dev, "usbhost_hs_fck failed error:%d\n", ret); + goto err_usbhost_ick; + } + + omap->usbhost_fs_fck = clk_get(dev, "fs_fck"); + if (IS_ERR(omap->usbhost_fs_fck)) { + ret = PTR_ERR(omap->usbhost_fs_fck); + dev_err(dev, "usbhost_fs_fck failed error:%d\n", ret); + goto err_usbhost_hs_fck; + } + + omap->usbtll_fck = clk_get(dev, "usbtll_fck"); + if (IS_ERR(omap->usbtll_fck)) { + ret = PTR_ERR(omap->usbtll_fck); + dev_err(dev, "usbtll_fck failed error:%d\n", ret); + goto err_usbhost_fs_fck; + } + + omap->usbtll_ick = clk_get(dev, "usbtll_ick"); + if (IS_ERR(omap->usbtll_ick)) { + ret = PTR_ERR(omap->usbtll_ick); + dev_err(dev, "usbtll_ick failed error:%d\n", ret); + goto err_usbtll_fck; + } omap->utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk"); if (IS_ERR(omap->utmi_p1_fck)) { ret = PTR_ERR(omap->utmi_p1_fck); dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret); - goto err_end; + goto err_usbtll_ick; } omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck"); @@ -485,8 +522,22 @@ err_xclk60mhsp1_ck: err_utmi_p1_fck: clk_put(omap->utmi_p1_fck); +err_usbtll_ick: + clk_put(omap->usbtll_ick); + +err_usbtll_fck: + clk_put(omap->usbtll_fck); + +err_usbhost_fs_fck: + clk_put(omap->usbhost_fs_fck); + +err_usbhost_hs_fck: + clk_put(omap->usbhost_hs_fck); + +err_usbhost_ick: + clk_put(omap->usbhost_ick); + err_end: - pm_runtime_disable(&pdev->dev); kfree(omap); end_probe: @@ -520,7 +571,11 @@ static int __devexit usbhs_omap_remove(struct platform_device *pdev) clk_put(omap->utmi_p2_fck); clk_put(omap->xclk60mhsp1_ck); clk_put(omap->utmi_p1_fck); - pm_runtime_disable(&pdev->dev); + clk_put(omap->usbtll_ick); + clk_put(omap->usbtll_fck); + clk_put(omap->usbhost_fs_fck); + clk_put(omap->usbhost_hs_fck); + clk_put(omap->usbhost_ick); kfree(omap); return 0; @@ -640,6 +695,7 @@ static int usbhs_enable(struct device *dev) struct usbhs_omap_platform_data *pdata = &omap->platdata; unsigned long flags = 0; int ret = 0; + unsigned long timeout; unsigned reg; dev_dbg(dev, "starting TI HSUSB Controller\n"); @@ -652,7 +708,11 @@ static int usbhs_enable(struct device *dev) if (omap->count > 0) goto end_count; - pm_runtime_get_sync(dev); + clk_enable(omap->usbhost_ick); + clk_enable(omap->usbhost_hs_fck); + clk_enable(omap->usbhost_fs_fck); + clk_enable(omap->usbtll_fck); + clk_enable(omap->usbtll_ick); if (pdata->ehci_data->phy_reset) { if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) { @@ -676,6 +736,50 @@ static int usbhs_enable(struct device *dev) omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION); dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev); + /* perform TLL soft reset, and wait until reset is complete */ + usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG, + OMAP_USBTLL_SYSCONFIG_SOFTRESET); + + /* Wait for TLL reset to complete */ + timeout = jiffies + msecs_to_jiffies(1000); + while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS) + & OMAP_USBTLL_SYSSTATUS_RESETDONE)) { + cpu_relax(); + + if (time_after(jiffies, timeout)) { + dev_dbg(dev, "operation timed out\n"); + ret = -EINVAL; + goto err_tll; + } + } + + dev_dbg(dev, "TLL RESET DONE\n"); + + /* (1<<3) = no idle mode only for initial debugging */ + usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG, + OMAP_USBTLL_SYSCONFIG_ENAWAKEUP | + OMAP_USBTLL_SYSCONFIG_SIDLEMODE | + OMAP_USBTLL_SYSCONFIG_AUTOIDLE); + + /* Put UHH in NoIdle/NoStandby mode */ + reg = usbhs_read(omap->uhh_base, OMAP_UHH_SYSCONFIG); + if (is_omap_usbhs_rev1(omap)) { + reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP + | OMAP_UHH_SYSCONFIG_SIDLEMODE + | OMAP_UHH_SYSCONFIG_CACTIVITY + | OMAP_UHH_SYSCONFIG_MIDLEMODE); + reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE; + + + } else if (is_omap_usbhs_rev2(omap)) { + reg &= ~OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR; + reg |= OMAP4_UHH_SYSCONFIG_NOIDLE; + reg &= ~OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR; + reg |= OMAP4_UHH_SYSCONFIG_NOSTDBY; + } + + usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg); + reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG); /* setup ULPI bypass and burst configurations */ reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN @@ -815,8 +919,6 @@ end_count: return 0; err_tll: - pm_runtime_put_sync(dev); - spin_unlock_irqrestore(&omap->lock, flags); if (pdata->ehci_data->phy_reset) { if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) gpio_free(pdata->ehci_data->reset_gpio_port[0]); @@ -824,6 +926,13 @@ err_tll: if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) gpio_free(pdata->ehci_data->reset_gpio_port[1]); } + + clk_disable(omap->usbtll_ick); + clk_disable(omap->usbtll_fck); + clk_disable(omap->usbhost_fs_fck); + clk_disable(omap->usbhost_hs_fck); + clk_disable(omap->usbhost_ick); + spin_unlock_irqrestore(&omap->lock, flags); return ret; } @@ -896,7 +1005,11 @@ static void usbhs_disable(struct device *dev) clk_disable(omap->utmi_p1_fck); } - pm_runtime_put_sync(dev); + clk_disable(omap->usbtll_ick); + clk_disable(omap->usbtll_fck); + clk_disable(omap->usbhost_fs_fck); + clk_disable(omap->usbhost_hs_fck); + clk_disable(omap->usbhost_ick); /* The gpio_free migh sleep; so unlock the spinlock */ spin_unlock_irqrestore(&omap->lock, flags); diff --git a/drivers/mfd/tps65911-comparator.c b/drivers/mfd/tps65911-comparator.c index 3d2dc56a3d40..283ac6759757 100644 --- a/drivers/mfd/tps65911-comparator.c +++ b/drivers/mfd/tps65911-comparator.c @@ -125,7 +125,7 @@ static DEVICE_ATTR(comp2_threshold, S_IRUGO, comp_threshold_show, NULL); static __devinit int tps65911_comparator_probe(struct platform_device *pdev) { struct tps65910 *tps65910 = dev_get_drvdata(pdev->dev.parent); - struct tps65910_platform_data *pdata = dev_get_platdata(tps65910->dev); + struct tps65910_board *pdata = dev_get_platdata(tps65910->dev); int ret; ret = comp_threshold_set(tps65910, COMP1, pdata->vmbch_threshold); diff --git a/drivers/misc/cb710/sgbuf2.c b/drivers/misc/cb710/sgbuf2.c index d019746551f3..2a40d0efdff5 100644 --- a/drivers/misc/cb710/sgbuf2.c +++ b/drivers/misc/cb710/sgbuf2.c @@ -47,7 +47,7 @@ static uint32_t sg_dwiter_read_buffer(struct sg_mapping_iter *miter) static inline bool needs_unaligned_copy(const void *ptr) { -#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS +#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS return false; #else return ((ptr - NULL) & 3) != 0; diff --git a/drivers/misc/ioc4.c b/drivers/misc/ioc4.c index 668d41e594a9..df03dd3bd0e2 100644 --- a/drivers/misc/ioc4.c +++ b/drivers/misc/ioc4.c @@ -270,7 +270,7 @@ ioc4_variant(struct ioc4_driver_data *idd) return IOC4_VARIANT_PCI_RT; } -static void __devinit +static void ioc4_load_modules(struct work_struct *work) { request_module("sgiioc4"); diff --git a/drivers/misc/lkdtm.c b/drivers/misc/lkdtm.c index 81d7fa4ec0db..150cd7061b80 100644 --- a/drivers/misc/lkdtm.c +++ b/drivers/misc/lkdtm.c @@ -120,6 +120,7 @@ static int recur_count = REC_NUM_DEFAULT; static enum cname cpoint = CN_INVALID; static enum ctype cptype = CT_NONE; static int count = DEFAULT_COUNT; +static DEFINE_SPINLOCK(count_lock); module_param(recur_count, int, 0644); MODULE_PARM_DESC(recur_count, " Recursion level for the stack overflow test, "\ @@ -230,11 +231,14 @@ static const char *cp_name_to_str(enum cname name) static int lkdtm_parse_commandline(void) { int i; + unsigned long flags; if (cpoint_count < 1 || recur_count < 1) return -EINVAL; + spin_lock_irqsave(&count_lock, flags); count = cpoint_count; + spin_unlock_irqrestore(&count_lock, flags); /* No special parameters */ if (!cpoint_type && !cpoint_name) @@ -349,6 +353,9 @@ static void lkdtm_do_action(enum ctype which) static void lkdtm_handler(void) { + unsigned long flags; + + spin_lock_irqsave(&count_lock, flags); count--; printk(KERN_INFO "lkdtm: Crash point %s of type %s hit, trigger in %d rounds\n", cp_name_to_str(cpoint), cp_type_to_str(cptype), count); @@ -357,6 +364,7 @@ static void lkdtm_handler(void) lkdtm_do_action(cptype); count = cpoint_count; } + spin_unlock_irqrestore(&count_lock, flags); } static int lkdtm_register_cpoint(enum cname which) diff --git a/drivers/misc/pti.c b/drivers/misc/pti.c index bb6f9255c17c..374dfcfccd07 100644 --- a/drivers/misc/pti.c +++ b/drivers/misc/pti.c @@ -317,7 +317,8 @@ EXPORT_SYMBOL_GPL(pti_request_masterchannel); * a master, channel ID address * used to write to PTI HW. * - * @mc: master, channel apeture ID address to be released. + * @mc: master, channel apeture ID address to be released. This + * will de-allocate the structure via kfree(). */ void pti_release_masterchannel(struct pti_masterchannel *mc) { @@ -475,8 +476,10 @@ static int pti_tty_install(struct tty_driver *driver, struct tty_struct *tty) else pti_tty_data->mc = pti_request_masterchannel(2); - if (pti_tty_data->mc == NULL) + if (pti_tty_data->mc == NULL) { + kfree(pti_tty_data); return -ENXIO; + } tty->driver_data = pti_tty_data; } @@ -495,7 +498,7 @@ static void pti_tty_cleanup(struct tty_struct *tty) if (pti_tty_data == NULL) return; pti_release_masterchannel(pti_tty_data->mc); - kfree(tty->driver_data); + kfree(pti_tty_data); tty->driver_data = NULL; } @@ -581,7 +584,7 @@ static int pti_char_open(struct inode *inode, struct file *filp) static int pti_char_release(struct inode *inode, struct file *filp) { pti_release_masterchannel(filp->private_data); - kfree(filp->private_data); + filp->private_data = NULL; return 0; } diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c index ee5109a3cd98..42f067347bc7 100644 --- a/drivers/misc/sgi-xp/xpnet.c +++ b/drivers/misc/sgi-xp/xpnet.c @@ -495,14 +495,14 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) } } + dev->stats.tx_packets++; + dev->stats.tx_bytes += skb->len; + if (atomic_dec_return(&queued_msg->use_count) == 0) { dev_kfree_skb(skb); kfree(queued_msg); } - dev->stats.tx_packets++; - dev->stats.tx_bytes += skb->len; - return NETDEV_TX_OK; } diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c index f91f82eabda7..54c91ffe4a91 100644 --- a/drivers/misc/ti-st/st_core.c +++ b/drivers/misc/ti-st/st_core.c @@ -605,7 +605,7 @@ long st_unregister(struct st_proto_s *proto) pr_debug("%s: %d ", __func__, proto->chnl_id); st_kim_ref(&st_gdata, 0); - if (proto->chnl_id >= ST_MAX_CHANNELS) { + if (!st_gdata || proto->chnl_id >= ST_MAX_CHANNELS) { pr_err(" chnl_id %d not supported", proto->chnl_id); return -EPROTONOSUPPORT; } diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c index 5da93ee6f6be..38fd2f04c07e 100644 --- a/drivers/misc/ti-st/st_kim.c +++ b/drivers/misc/ti-st/st_kim.c @@ -245,9 +245,9 @@ void skip_change_remote_baud(unsigned char **ptr, long *len) pr_err("invalid action after change remote baud command"); } else { *ptr = *ptr + sizeof(struct bts_action) + - ((struct bts_action *)nxt_action)->size; + ((struct bts_action *)cur_action)->size; *len = *len - (sizeof(struct bts_action) + - ((struct bts_action *)nxt_action)->size); + ((struct bts_action *)cur_action)->size); /* warn user on not commenting these in firmware */ pr_warn("skipping the wait event of change remote baud"); } @@ -604,6 +604,10 @@ void st_kim_ref(struct st_data_s **core_data, int id) struct kim_data_s *kim_gdata; /* get kim_gdata reference from platform device */ pdev = st_get_plat_device(id); + if (!pdev) { + *core_data = NULL; + return; + } kim_gdata = dev_get_drvdata(&pdev->dev); *core_data = kim_gdata->core_data; } diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 71da5641e258..f85e42224559 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -1024,7 +1024,7 @@ static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card, INIT_LIST_HEAD(&md->part); md->usage = 1; - ret = mmc_init_queue(&md->queue, card, &md->lock); + ret = mmc_init_queue(&md->queue, card, &md->lock, subname); if (ret) goto err_putdisk; @@ -1297,6 +1297,9 @@ static void mmc_blk_remove(struct mmc_card *card) struct mmc_blk_data *md = mmc_get_drvdata(card); mmc_blk_remove_parts(card, md); + mmc_claim_host(card->host); + mmc_blk_part_switch(card, md); + mmc_release_host(card->host); mmc_blk_remove_req(md); mmc_set_drvdata(card, NULL); } diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c index c07322c2658c..6413afa318d2 100644 --- a/drivers/mmc/card/queue.c +++ b/drivers/mmc/card/queue.c @@ -106,10 +106,12 @@ static void mmc_request(struct request_queue *q) * @mq: mmc queue * @card: mmc card to attach this queue * @lock: queue lock + * @subname: partition subname * * Initialise a MMC card request queue. */ -int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock) +int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, + spinlock_t *lock, const char *subname) { struct mmc_host *host = card->host; u64 limit = BLK_BOUNCE_HIGH; @@ -133,12 +135,7 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock mq->queue->limits.max_discard_sectors = UINT_MAX; if (card->erased_byte == 0) mq->queue->limits.discard_zeroes_data = 1; - if (!mmc_can_trim(card) && is_power_of_2(card->erase_size)) { - mq->queue->limits.discard_granularity = - card->erase_size << 9; - mq->queue->limits.discard_alignment = - card->erase_size << 9; - } + mq->queue->limits.discard_granularity = card->pref_erase << 9; if (mmc_can_secure_erase_trim(card)) queue_flag_set_unlocked(QUEUE_FLAG_SECDISCARD, mq->queue); @@ -209,8 +206,8 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock sema_init(&mq->thread_sem, 1); - mq->thread = kthread_run(mmc_queue_thread, mq, "mmcqd/%d", - host->index); + mq->thread = kthread_run(mmc_queue_thread, mq, "mmcqd/%d%s", + host->index, subname ? subname : ""); if (IS_ERR(mq->thread)) { ret = PTR_ERR(mq->thread); diff --git a/drivers/mmc/card/queue.h b/drivers/mmc/card/queue.h index 64e66e0d4994..6223ef8dc9cd 100644 --- a/drivers/mmc/card/queue.h +++ b/drivers/mmc/card/queue.h @@ -19,7 +19,8 @@ struct mmc_queue { unsigned int bounce_sg_len; }; -extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *); +extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *, + const char *); extern void mmc_cleanup_queue(struct mmc_queue *); extern void mmc_queue_suspend(struct mmc_queue *); extern void mmc_queue_resume(struct mmc_queue *); diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 68091dda3f31..7843efe22359 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1245,7 +1245,7 @@ static unsigned int mmc_mmc_erase_timeout(struct mmc_card *card, */ timeout_clks <<= 1; timeout_us += (timeout_clks * 1000) / - (card->host->ios.clock / 1000); + (mmc_host_clk_rate(card->host) / 1000); erase_timeout = timeout_us / 1000; diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 4d0c15bfa514..262fff019177 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -691,15 +691,54 @@ static int mmc_sdio_resume(struct mmc_host *host) static int mmc_sdio_power_restore(struct mmc_host *host) { int ret; + u32 ocr; BUG_ON(!host); BUG_ON(!host->card); mmc_claim_host(host); + + /* + * Reset the card by performing the same steps that are taken by + * mmc_rescan_try_freq() and mmc_attach_sdio() during a "normal" probe. + * + * sdio_reset() is technically not needed. Having just powered up the + * hardware, it should already be in reset state. However, some + * platforms (such as SD8686 on OLPC) do not instantly cut power, + * meaning that a reset is required when restoring power soon after + * powering off. It is harmless in other cases. + * + * The CMD5 reset (mmc_send_io_op_cond()), according to the SDIO spec, + * is not necessary for non-removable cards. However, it is required + * for OLPC SD8686 (which expects a [CMD5,5,3,7] init sequence), and + * harmless in other situations. + * + * With these steps taken, mmc_select_voltage() is also required to + * restore the correct voltage setting of the card. + */ + sdio_reset(host); + mmc_go_idle(host); + mmc_send_if_cond(host, host->ocr_avail); + + ret = mmc_send_io_op_cond(host, 0, &ocr); + if (ret) + goto out; + + if (host->ocr_avail_sdio) + host->ocr_avail = host->ocr_avail_sdio; + + host->ocr = mmc_select_voltage(host, ocr & ~0x7F); + if (!host->ocr) { + ret = -EINVAL; + goto out; + } + ret = mmc_sdio_init_card(host, host->ocr, host->card, mmc_card_keep_power(host)); if (!ret && host->sdio_irqs) mmc_signal_sdio_irq(host); + +out: mmc_release_host(host); return ret; diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c index d29b9c36919a..d2565df8a7fb 100644 --- a/drivers/mmc/core/sdio_bus.c +++ b/drivers/mmc/core/sdio_bus.c @@ -189,7 +189,7 @@ static int sdio_bus_remove(struct device *dev) /* Then undo the runtime PM settings in sdio_bus_probe() */ if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) - pm_runtime_put_noidle(dev); + pm_runtime_put_sync(dev); out: return ret; diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 7721de942c69..fe140724a02e 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -582,6 +582,8 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data, data->error = -EILSEQ; } else if (status & MCI_DATATIMEOUT) { data->error = -ETIMEDOUT; + } else if (status & MCI_STARTBITERR) { + data->error = -ECOMM; } else if (status & MCI_TXUNDERRUN) { data->error = -EIO; } else if (status & MCI_RXOVERRUN) { diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index bb32e21c09db..2164e8c6476c 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -86,6 +86,7 @@ #define MCI_CMDRESPEND (1 << 6) #define MCI_CMDSENT (1 << 7) #define MCI_DATAEND (1 << 8) +#define MCI_STARTBITERR (1 << 9) #define MCI_DATABLOCKEND (1 << 10) #define MCI_CMDACTIVE (1 << 11) #define MCI_TXACTIVE (1 << 12) @@ -112,6 +113,7 @@ #define MCI_CMDRESPENDCLR (1 << 6) #define MCI_CMDSENTCLR (1 << 7) #define MCI_DATAENDCLR (1 << 8) +#define MCI_STARTBITERRCLR (1 << 9) #define MCI_DATABLOCKENDCLR (1 << 10) /* Extended status bits for the ST Micro variants */ #define MCI_ST_SDIOITC (1 << 22) @@ -127,6 +129,7 @@ #define MCI_CMDRESPENDMASK (1 << 6) #define MCI_CMDSENTMASK (1 << 7) #define MCI_DATAENDMASK (1 << 8) +#define MCI_STARTBITERRMASK (1 << 9) #define MCI_DATABLOCKENDMASK (1 << 10) #define MCI_CMDACTIVEMASK (1 << 11) #define MCI_TXACTIVEMASK (1 << 12) @@ -150,7 +153,7 @@ #define MCI_IRQENABLE \ (MCI_CMDCRCFAILMASK|MCI_DATACRCFAILMASK|MCI_CMDTIMEOUTMASK| \ MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK| \ - MCI_CMDRESPENDMASK|MCI_CMDSENTMASK) + MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_STARTBITERRMASK) /* These interrupts are directed to IRQ1 when two IRQ lines are available */ #define MCI_IRQ1MASK \ diff --git a/drivers/mmc/host/of_mmc_spi.c b/drivers/mmc/host/of_mmc_spi.c index e2aecb7f1d5c..ab66f2454dc4 100644 --- a/drivers/mmc/host/of_mmc_spi.c +++ b/drivers/mmc/host/of_mmc_spi.c @@ -25,6 +25,11 @@ #include <linux/mmc/core.h> #include <linux/mmc/host.h> +/* For archs that don't support NO_IRQ (such as mips), provide a dummy value */ +#ifndef NO_IRQ +#define NO_IRQ 0 +#endif + MODULE_LICENSE("GPL"); enum { diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 5b2e2155b413..dedf3dab8a3b 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -429,7 +429,6 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host) return -EINVAL; } } - mmc_slot(host).ocr_mask = mmc_regulator_get_ocrmask(reg); /* Allow an aux regulator */ reg = regulator_get(host->dev, "vmmc_aux"); @@ -962,7 +961,8 @@ static void omap_hsmmc_dma_cleanup(struct omap_hsmmc_host *host, int errno) spin_unlock(&host->irq_lock); if (host->use_dma && dma_ch != -1) { - dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, host->dma_len, + dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, + host->data->sg_len, omap_hsmmc_get_dma_dir(host, host->data)); omap_free_dma(dma_ch); } @@ -1346,7 +1346,7 @@ static void omap_hsmmc_dma_cb(int lch, u16 ch_status, void *cb_data) return; } - dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len, + dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, omap_hsmmc_get_dma_dir(host, data)); req_in_progress = host->req_in_progress; diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c index b3654293017b..ce500f03df85 100644 --- a/drivers/mmc/host/sh_mobile_sdhi.c +++ b/drivers/mmc/host/sh_mobile_sdhi.c @@ -92,7 +92,7 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev) mmc_data->ocr_mask = p->tmio_ocr_mask; mmc_data->capabilities |= p->tmio_caps; - if (p->dma_slave_tx >= 0 && p->dma_slave_rx >= 0) { + if (p->dma_slave_tx > 0 && p->dma_slave_rx > 0) { priv->param_tx.slave_id = p->dma_slave_tx; priv->param_rx.slave_id = p->dma_slave_rx; priv->dma_priv.chan_priv_tx = &priv->param_tx; @@ -165,13 +165,14 @@ static int sh_mobile_sdhi_remove(struct platform_device *pdev) p->pdata = NULL; + tmio_mmc_host_remove(host); + for (i = 0; i < 3; i++) { irq = platform_get_irq(pdev, i); if (irq >= 0) free_irq(irq, host); } - tmio_mmc_host_remove(host); clk_disable(priv->clk); clk_put(priv->clk); kfree(priv); diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c index ad6347bb02dd..0b09e8239aa0 100644 --- a/drivers/mmc/host/tmio_mmc_pio.c +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -824,8 +824,8 @@ static int tmio_mmc_get_ro(struct mmc_host *mmc) struct tmio_mmc_host *host = mmc_priv(mmc); struct tmio_mmc_data *pdata = host->pdata; - return ((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) || - !(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT)); + return !((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) || + (sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT)); } static int tmio_mmc_get_cd(struct mmc_host *mmc) diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c index cbb03305b77b..d4455ffbefd8 100644 --- a/drivers/mmc/host/vub300.c +++ b/drivers/mmc/host/vub300.c @@ -2096,7 +2096,7 @@ static struct mmc_host_ops vub300_mmc_ops = { static int vub300_probe(struct usb_interface *interface, const struct usb_device_id *id) { /* NOT irq */ - struct vub300_mmc_host *vub300 = NULL; + struct vub300_mmc_host *vub300; struct usb_host_interface *iface_desc; struct usb_device *udev = usb_get_dev(interface_to_usbdev(interface)); int i; @@ -2118,23 +2118,20 @@ static int vub300_probe(struct usb_interface *interface, command_out_urb = usb_alloc_urb(0, GFP_KERNEL); if (!command_out_urb) { retval = -ENOMEM; - dev_err(&vub300->udev->dev, - "not enough memory for the command_out_urb\n"); + dev_err(&udev->dev, "not enough memory for command_out_urb\n"); goto error0; } command_res_urb = usb_alloc_urb(0, GFP_KERNEL); if (!command_res_urb) { retval = -ENOMEM; - dev_err(&vub300->udev->dev, - "not enough memory for the command_res_urb\n"); + dev_err(&udev->dev, "not enough memory for command_res_urb\n"); goto error1; } /* this also allocates memory for our VUB300 mmc host device */ mmc = mmc_alloc_host(sizeof(struct vub300_mmc_host), &udev->dev); if (!mmc) { retval = -ENOMEM; - dev_err(&vub300->udev->dev, - "not enough memory for the mmc_host\n"); + dev_err(&udev->dev, "not enough memory for the mmc_host\n"); goto error4; } /* MMC core transfer sizes tunable parameters */ diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 0bb254c7d2b1..33d8aad8bba5 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -339,9 +339,9 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command, (FIR_OP_UA << FIR_OP1_SHIFT) | (FIR_OP_RBW << FIR_OP2_SHIFT)); out_be32(&lbc->fcr, NAND_CMD_READID << FCR_CMD0_SHIFT); - /* 5 bytes for manuf, device and exts */ - out_be32(&lbc->fbcr, 5); - elbc_fcm_ctrl->read_bytes = 5; + /* nand_get_flash_type() reads 8 bytes of entire ID string */ + out_be32(&lbc->fbcr, 8); + elbc_fcm_ctrl->read_bytes = 8; elbc_fcm_ctrl->use_mdr = 1; elbc_fcm_ctrl->mdr = 0; diff --git a/drivers/net/3c503.c b/drivers/net/3c503.c index d84f6e8903a5..5b732988d493 100644 --- a/drivers/net/3c503.c +++ b/drivers/net/3c503.c @@ -412,7 +412,7 @@ el2_open(struct net_device *dev) outb_p(0x04 << ((*irqp == 9) ? 2 : *irqp), E33G_IDCFR); outb_p(0x00, E33G_IDCFR); msleep(1); - free_irq(*irqp, el2_probe_interrupt); + free_irq(*irqp, &seen); if (!seen) continue; @@ -422,6 +422,7 @@ el2_open(struct net_device *dev) continue; if (retval < 0) goto err_disable; + break; } while (*++irqp); if (*irqp == 0) { diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index 98517a373473..e3bad8247fd1 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -992,6 +992,7 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev, * features */ dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA; + dev->vlan_features = dev->features; dev->irq = pdev->irq; diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 19f04a34783a..93359fab240e 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -3416,7 +3416,8 @@ config NETCONSOLE config NETCONSOLE_DYNAMIC bool "Dynamic reconfiguration of logging targets" - depends on NETCONSOLE && SYSFS && CONFIGFS_FS + depends on NETCONSOLE && SYSFS && CONFIGFS_FS && \ + !(NETCONSOLE=y && CONFIGFS_FS=m) help This option enables the ability to dynamically reconfigure target parameters (interface, IP addresses, port numbers, MAC addresses) diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index 68d45ba2d9b9..6c019e148546 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -52,13 +52,13 @@ MODULE_DESCRIPTION(DRV_DESC); MODULE_ALIAS("platform:bfin_mac"); #if defined(CONFIG_BFIN_MAC_USE_L1) -# define bfin_mac_alloc(dma_handle, size) l1_data_sram_zalloc(size) -# define bfin_mac_free(dma_handle, ptr) l1_data_sram_free(ptr) +# define bfin_mac_alloc(dma_handle, size, num) l1_data_sram_zalloc(size*num) +# define bfin_mac_free(dma_handle, ptr, num) l1_data_sram_free(ptr) #else -# define bfin_mac_alloc(dma_handle, size) \ - dma_alloc_coherent(NULL, size, dma_handle, GFP_KERNEL) -# define bfin_mac_free(dma_handle, ptr) \ - dma_free_coherent(NULL, sizeof(*ptr), ptr, dma_handle) +# define bfin_mac_alloc(dma_handle, size, num) \ + dma_alloc_coherent(NULL, size*num, dma_handle, GFP_KERNEL) +# define bfin_mac_free(dma_handle, ptr, num) \ + dma_free_coherent(NULL, sizeof(*ptr)*num, ptr, dma_handle) #endif #define PKT_BUF_SZ 1580 @@ -95,7 +95,7 @@ static void desc_list_free(void) t = t->next; } } - bfin_mac_free(dma_handle, tx_desc); + bfin_mac_free(dma_handle, tx_desc, CONFIG_BFIN_TX_DESC_NUM); } if (rx_desc) { @@ -109,7 +109,7 @@ static void desc_list_free(void) r = r->next; } } - bfin_mac_free(dma_handle, rx_desc); + bfin_mac_free(dma_handle, rx_desc, CONFIG_BFIN_RX_DESC_NUM); } } @@ -126,13 +126,13 @@ static int desc_list_init(void) #endif tx_desc = bfin_mac_alloc(&dma_handle, - sizeof(struct net_dma_desc_tx) * + sizeof(struct net_dma_desc_tx), CONFIG_BFIN_TX_DESC_NUM); if (tx_desc == NULL) goto init_error; rx_desc = bfin_mac_alloc(&dma_handle, - sizeof(struct net_dma_desc_rx) * + sizeof(struct net_dma_desc_rx), CONFIG_BFIN_RX_DESC_NUM); if (rx_desc == NULL) goto init_error; diff --git a/drivers/net/bna/bnad.c b/drivers/net/bna/bnad.c index 7d25a97d33f6..44e219c910da 100644 --- a/drivers/net/bna/bnad.c +++ b/drivers/net/bna/bnad.c @@ -1111,7 +1111,7 @@ bnad_mbox_irq_alloc(struct bnad *bnad, struct bna_intr_info *intr_info) { int err = 0; - unsigned long flags; + unsigned long irq_flags = 0, flags; u32 irq; irq_handler_t irq_handler; @@ -1125,18 +1125,17 @@ bnad_mbox_irq_alloc(struct bnad *bnad, if (bnad->cfg_flags & BNAD_CF_MSIX) { irq_handler = (irq_handler_t)bnad_msix_mbox_handler; irq = bnad->msix_table[bnad->msix_num - 1].vector; - flags = 0; intr_info->intr_type = BNA_INTR_T_MSIX; intr_info->idl[0].vector = bnad->msix_num - 1; } else { irq_handler = (irq_handler_t)bnad_isr; irq = bnad->pcidev->irq; - flags = IRQF_SHARED; + irq_flags = IRQF_SHARED; intr_info->intr_type = BNA_INTR_T_INTX; /* intr_info->idl.vector = 0 ? */ } spin_unlock_irqrestore(&bnad->bna_lock, flags); - + flags = irq_flags; sprintf(bnad->mbox_irq_name, "%s", BNAD_NAME); /* diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c index 4b70311a11ef..74be989f51c5 100644 --- a/drivers/net/bnx2x/bnx2x_main.c +++ b/drivers/net/bnx2x/bnx2x_main.c @@ -49,6 +49,7 @@ #include <linux/zlib.h> #include <linux/io.h> #include <linux/stringify.h> +#include <linux/vmalloc.h> #define BNX2X_MAIN #include "bnx2x.h" @@ -4537,8 +4538,7 @@ static int bnx2x_gunzip_init(struct bnx2x *bp) if (bp->strm == NULL) goto gunzip_nomem2; - bp->strm->workspace = kmalloc(zlib_inflate_workspacesize(), - GFP_KERNEL); + bp->strm->workspace = vmalloc(zlib_inflate_workspacesize()); if (bp->strm->workspace == NULL) goto gunzip_nomem3; @@ -4562,7 +4562,7 @@ gunzip_nomem1: static void bnx2x_gunzip_end(struct bnx2x *bp) { if (bp->strm) { - kfree(bp->strm->workspace); + vfree(bp->strm->workspace); kfree(bp->strm); bp->strm = NULL; } diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 652b30e525d0..eafe44a528ac 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1297,6 +1297,7 @@ static inline int slave_enable_netpoll(struct slave *slave) goto out; np->dev = slave->dev; + strlcpy(np->dev_name, slave->dev->name, IFNAMSIZ); err = __netpoll_setup(np); if (err) { kfree(np); diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index 1d699e3df547..754df5ef1729 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -36,7 +36,7 @@ config CAN_SLCAN config CAN_DEV tristate "Platform CAN drivers with Netlink support" depends on CAN - default Y + default y ---help--- Enables the common framework for platform CAN drivers with Netlink support. This is the standard library for CAN drivers. @@ -45,7 +45,7 @@ config CAN_DEV config CAN_CALC_BITTIMING bool "CAN bit-timing calculation" depends on CAN_DEV - default Y + default y ---help--- If enabled, CAN bit-timing parameters will be calculated for the bit-rate specified via Netlink argument "bitrate" when the device diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c index 3f562ba2f0c9..76bf5892b962 100644 --- a/drivers/net/cxgb3/sge.c +++ b/drivers/net/cxgb3/sge.c @@ -2026,7 +2026,7 @@ static void rx_eth(struct adapter *adap, struct sge_rspq *rq, skb->ip_summed = CHECKSUM_UNNECESSARY; } else skb_checksum_none_assert(skb); - skb_record_rx_queue(skb, qs - &adap->sge.qs[0]); + skb_record_rx_queue(skb, qs - &adap->sge.qs[pi->first_qset]); if (unlikely(p->vlan_valid)) { struct vlan_group *grp = pi->vlan_grp; @@ -2145,7 +2145,7 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs, if (!complete) return; - skb_record_rx_queue(skb, qs - &adap->sge.qs[0]); + skb_record_rx_queue(skb, qs - &adap->sge.qs[pi->first_qset]); if (unlikely(cpl->vlan_valid)) { struct vlan_group *grp = pi->vlan_grp; diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/fs_enet/mac-fcc.c index 7a84e45487e8..7583a9572bcc 100644 --- a/drivers/net/fs_enet/mac-fcc.c +++ b/drivers/net/fs_enet/mac-fcc.c @@ -105,7 +105,7 @@ static int do_pd_setup(struct fs_enet_private *fep) goto out_ep; fep->fcc.mem = (void __iomem *)cpm2_immr; - fpi->dpram_offset = cpm_dpalloc(128, 8); + fpi->dpram_offset = cpm_dpalloc(128, 32); if (IS_ERR_VALUE(fpi->dpram_offset)) { ret = fpi->dpram_offset; goto out_fcccp; diff --git a/drivers/net/greth.c b/drivers/net/greth.c index f181304a7ab6..672f096fe090 100644 --- a/drivers/net/greth.c +++ b/drivers/net/greth.c @@ -1015,11 +1015,10 @@ static int greth_set_mac_add(struct net_device *dev, void *p) return -EINVAL; memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + GRETH_REGSAVE(regs->esa_msb, dev->dev_addr[0] << 8 | dev->dev_addr[1]); + GRETH_REGSAVE(regs->esa_lsb, dev->dev_addr[2] << 24 | dev->dev_addr[3] << 16 | + dev->dev_addr[4] << 8 | dev->dev_addr[5]); - GRETH_REGSAVE(regs->esa_msb, addr->sa_data[0] << 8 | addr->sa_data[1]); - GRETH_REGSAVE(regs->esa_lsb, - addr->sa_data[2] << 24 | addr-> - sa_data[3] << 16 | addr->sa_data[4] << 8 | addr->sa_data[5]); return 0; } diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c index 3e5d0b6b6516..0d283781bc5e 100644 --- a/drivers/net/hamradio/6pack.c +++ b/drivers/net/hamradio/6pack.c @@ -692,10 +692,10 @@ static void sixpack_close(struct tty_struct *tty) { struct sixpack *sp; - write_lock(&disc_data_lock); + write_lock_bh(&disc_data_lock); sp = tty->disc_data; tty->disc_data = NULL; - write_unlock(&disc_data_lock); + write_unlock_bh(&disc_data_lock); if (!sp) return; diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index 4c628393c8b1..bc02968cee16 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -813,10 +813,10 @@ static void mkiss_close(struct tty_struct *tty) { struct mkiss *ax; - write_lock(&disc_data_lock); + write_lock_bh(&disc_data_lock); ax = tty->disc_data; tty->disc_data = NULL; - write_unlock(&disc_data_lock); + write_unlock_bh(&disc_data_lock); if (!ax) return; diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c index 8e10d2f6a5ad..c3ecb118c1df 100644 --- a/drivers/net/hp100.c +++ b/drivers/net/hp100.c @@ -1580,12 +1580,12 @@ static netdev_tx_t hp100_start_xmit_bm(struct sk_buff *skb, hp100_outl(ringptr->pdl_paddr, TX_PDA_L); /* Low Prio. Queue */ lp->txrcommit++; - spin_unlock_irqrestore(&lp->lock, flags); - /* Update statistics */ dev->stats.tx_packets++; dev->stats.tx_bytes += skb->len; + spin_unlock_irqrestore(&lp->lock, flags); + return NETDEV_TX_OK; drop: diff --git a/drivers/net/hplance.c b/drivers/net/hplance.c index b6060f7538df..a900d5bf2948 100644 --- a/drivers/net/hplance.c +++ b/drivers/net/hplance.c @@ -135,7 +135,7 @@ static void __devexit hplance_remove_one(struct dio_dev *d) } /* Initialise a single lance board at the given DIO device */ -static void __init hplance_init(struct net_device *dev, struct dio_dev *d) +static void __devinit hplance_init(struct net_device *dev, struct dio_dev *d) { unsigned long va = (d->resource.start + DIO_VIRADDRBASE); struct hplance_private *lp; diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c index b78be088c4ad..8f8b65af9ed5 100644 --- a/drivers/net/natsemi.c +++ b/drivers/net/natsemi.c @@ -2360,7 +2360,8 @@ static void netdev_rx(struct net_device *dev, int *work_done, int work_to_do) PCI_DMA_FROMDEVICE); } else { pci_unmap_single(np->pci_dev, np->rx_dma[entry], - buflen, PCI_DMA_FROMDEVICE); + buflen + NATSEMI_PADDING, + PCI_DMA_FROMDEVICE); skb_put(skb = np->rx_skbuff[entry], pkt_len); np->rx_skbuff[entry] = NULL; } diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index b644383017f9..c0788a31ff0f 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -1965,11 +1965,11 @@ netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev) netxen_tso_check(netdev, tx_ring, first_desc, skb); - netxen_nic_update_cmd_producer(adapter, tx_ring); - adapter->stats.txbytes += skb->len; adapter->stats.xmitcalled++; + netxen_nic_update_cmd_producer(adapter, tx_ring); + return NETDEV_TX_OK; drop_packet: diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 392a6c4b72e5..a70244306c94 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -58,6 +58,7 @@ config BROADCOM_PHY config BCM63XX_PHY tristate "Drivers for Broadcom 63xx SOCs internal PHY" + depends on BCM63XX ---help--- Currently supports the 6348 and 6358 PHYs. diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c index b0c9522bb535..2cd8dc5847b4 100644 --- a/drivers/net/phy/dp83640.c +++ b/drivers/net/phy/dp83640.c @@ -543,11 +543,20 @@ static void recalibrate(struct dp83640_clock *clock) /* time stamping methods */ -static void decode_evnt(struct dp83640_private *dp83640, - struct phy_txts *phy_txts, u16 ests) +static int decode_evnt(struct dp83640_private *dp83640, + void *data, u16 ests) { + struct phy_txts *phy_txts; struct ptp_clock_event event; int words = (ests >> EVNT_TS_LEN_SHIFT) & EVNT_TS_LEN_MASK; + u16 ext_status = 0; + + if (ests & MULT_EVNT) { + ext_status = *(u16 *) data; + data += sizeof(ext_status); + } + + phy_txts = data; switch (words) { /* fall through in every case */ case 3: @@ -565,6 +574,9 @@ static void decode_evnt(struct dp83640_private *dp83640, event.timestamp = phy2txts(&dp83640->edata); ptp_clock_event(dp83640->clock->ptp_clock, &event); + + words = ext_status ? words + 2 : words + 1; + return words * sizeof(u16); } static void decode_rxts(struct dp83640_private *dp83640, @@ -643,9 +655,7 @@ static void decode_status_frame(struct dp83640_private *dp83640, } else if (PSF_EVNT == type && len >= sizeof(*phy_txts)) { - phy_txts = (struct phy_txts *) ptr; - decode_evnt(dp83640, phy_txts, ests); - size = sizeof(*phy_txts); + size = decode_evnt(dp83640, ptr, ests); } else { size = 0; @@ -1034,8 +1044,8 @@ static bool dp83640_rxtstamp(struct phy_device *phydev, if (is_status_frame(skb, type)) { decode_status_frame(dp83640, skb); - /* Let the stack drop this frame. */ - return false; + kfree_skb(skb); + return true; } SKB_PTP_TYPE(skb) = type; diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp_async.c index a1b82c9c67d2..c554a397e558 100644 --- a/drivers/net/ppp_async.c +++ b/drivers/net/ppp_async.c @@ -523,7 +523,7 @@ static void ppp_async_process(unsigned long arg) #define PUT_BYTE(ap, buf, c, islcp) do { \ if ((islcp && c < 0x20) || (ap->xaccm[c >> 5] & (1 << (c & 0x1f)))) {\ *buf++ = PPP_ESCAPE; \ - *buf++ = c ^ 0x20; \ + *buf++ = c ^ PPP_TRANS; \ } else \ *buf++ = c; \ } while (0) @@ -896,7 +896,7 @@ ppp_async_input(struct asyncppp *ap, const unsigned char *buf, sp = skb_put(skb, n); memcpy(sp, buf, n); if (ap->state & SC_ESCAPE) { - sp[0] ^= 0x20; + sp[0] ^= PPP_TRANS; ap->state &= ~SC_ESCAPE; } } diff --git a/drivers/net/ppp_deflate.c b/drivers/net/ppp_deflate.c index 31e9407a0739..1dbdf82a6dfd 100644 --- a/drivers/net/ppp_deflate.c +++ b/drivers/net/ppp_deflate.c @@ -305,7 +305,7 @@ static void z_decomp_free(void *arg) if (state) { zlib_inflateEnd(&state->strm); - kfree(state->strm.workspace); + vfree(state->strm.workspace); kfree(state); } } @@ -345,8 +345,7 @@ static void *z_decomp_alloc(unsigned char *options, int opt_len) state->w_size = w_size; state->strm.next_out = NULL; - state->strm.workspace = kmalloc(zlib_inflate_workspacesize(), - GFP_KERNEL|__GFP_REPEAT); + state->strm.workspace = vmalloc(zlib_inflate_workspacesize()); if (state->strm.workspace == NULL) goto out_free; diff --git a/drivers/net/pxa168_eth.c b/drivers/net/pxa168_eth.c index 89f7540d90f9..5f597ca592bb 100644 --- a/drivers/net/pxa168_eth.c +++ b/drivers/net/pxa168_eth.c @@ -1273,7 +1273,7 @@ static int pxa168_eth_start_xmit(struct sk_buff *skb, struct net_device *dev) wmb(); wrl(pep, SDMA_CMD, SDMA_CMD_TXDH | SDMA_CMD_ERD); - stats->tx_bytes += skb->len; + stats->tx_bytes += length; stats->tx_packets++; dev->trans_start = jiffies; if (pep->tx_ring_size - pep->tx_desc_count <= 1) { diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h index d32850715f5c..ca306fd5f588 100644 --- a/drivers/net/qlge/qlge.h +++ b/drivers/net/qlge/qlge.h @@ -16,7 +16,7 @@ */ #define DRV_NAME "qlge" #define DRV_STRING "QLogic 10 Gigabit PCI-E Ethernet Driver " -#define DRV_VERSION "v1.00.00.27.00.00-01" +#define DRV_VERSION "v1.00.00.29.00.00-01" #define WQ_ADDR_ALIGN 0x3 /* 4 byte alignment */ @@ -1996,6 +1996,7 @@ enum { QL_LB_LINK_UP = 10, QL_FRC_COREDUMP = 11, QL_EEH_FATAL = 12, + QL_ASIC_RECOVERY = 14, /* We are in ascic recovery. */ }; /* link_status bit definitions */ diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c index 930ae45457bb..6b4ff970972b 100644 --- a/drivers/net/qlge/qlge_main.c +++ b/drivers/net/qlge/qlge_main.c @@ -2152,6 +2152,10 @@ void ql_queue_asic_error(struct ql_adapter *qdev) * thread */ clear_bit(QL_ADAPTER_UP, &qdev->flags); + /* Set asic recovery bit to indicate reset process that we are + * in fatal error recovery process rather than normal close + */ + set_bit(QL_ASIC_RECOVERY, &qdev->flags); queue_delayed_work(qdev->workqueue, &qdev->asic_reset_work, 0); } @@ -2166,23 +2170,20 @@ static void ql_process_chip_ae_intr(struct ql_adapter *qdev, return; case CAM_LOOKUP_ERR_EVENT: - netif_err(qdev, link, qdev->ndev, - "Multiple CAM hits lookup occurred.\n"); - netif_err(qdev, drv, qdev->ndev, - "This event shouldn't occur.\n"); + netdev_err(qdev->ndev, "Multiple CAM hits lookup occurred.\n"); + netdev_err(qdev->ndev, "This event shouldn't occur.\n"); ql_queue_asic_error(qdev); return; case SOFT_ECC_ERROR_EVENT: - netif_err(qdev, rx_err, qdev->ndev, - "Soft ECC error detected.\n"); + netdev_err(qdev->ndev, "Soft ECC error detected.\n"); ql_queue_asic_error(qdev); break; case PCI_ERR_ANON_BUF_RD: - netif_err(qdev, rx_err, qdev->ndev, - "PCI error occurred when reading anonymous buffers from rx_ring %d.\n", - ib_ae_rsp->q_id); + netdev_err(qdev->ndev, "PCI error occurred when reading " + "anonymous buffers from rx_ring %d.\n", + ib_ae_rsp->q_id); ql_queue_asic_error(qdev); break; @@ -2437,11 +2438,10 @@ static irqreturn_t qlge_isr(int irq, void *dev_id) */ if (var & STS_FE) { ql_queue_asic_error(qdev); - netif_err(qdev, intr, qdev->ndev, - "Got fatal error, STS = %x.\n", var); + netdev_err(qdev->ndev, "Got fatal error, STS = %x.\n", var); var = ql_read32(qdev, ERR_STS); - netif_err(qdev, intr, qdev->ndev, - "Resetting chip. Error Status Register = 0x%x\n", var); + netdev_err(qdev->ndev, "Resetting chip. " + "Error Status Register = 0x%x\n", var); return IRQ_HANDLED; } @@ -3818,11 +3818,17 @@ static int ql_adapter_reset(struct ql_adapter *qdev) end_jiffies = jiffies + max((unsigned long)1, usecs_to_jiffies(30)); - /* Stop management traffic. */ - ql_mb_set_mgmnt_traffic_ctl(qdev, MB_SET_MPI_TFK_STOP); + /* Check if bit is set then skip the mailbox command and + * clear the bit, else we are in normal reset process. + */ + if (!test_bit(QL_ASIC_RECOVERY, &qdev->flags)) { + /* Stop management traffic. */ + ql_mb_set_mgmnt_traffic_ctl(qdev, MB_SET_MPI_TFK_STOP); - /* Wait for the NIC and MGMNT FIFOs to empty. */ - ql_wait_fifo_empty(qdev); + /* Wait for the NIC and MGMNT FIFOs to empty. */ + ql_wait_fifo_empty(qdev); + } else + clear_bit(QL_ASIC_RECOVERY, &qdev->flags); ql_write32(qdev, RST_FO, (RST_FO_FR << 16) | RST_FO_FR); diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index ef1ce2ebeb4a..5990621fb5cd 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -742,7 +742,7 @@ static void rtl8168_oob_notify(struct rtl8169_private *tp, u8 cmd) msleep(2); for (i = 0; i < 5; i++) { udelay(100); - if (!(RTL_R32(ERIDR) & ERIAR_FLAG)) + if (!(RTL_R32(ERIAR) & ERIAR_FLAG)) break; } @@ -1621,7 +1621,7 @@ static void rtl8169_get_mac_version(struct rtl8169_private *tp, * * (RTL_R32(TxConfig) & 0x700000) == 0x200000 ? 8101Eb : 8101Ec */ - static const struct { + static const struct rtl_mac_info { u32 mask; u32 val; int mac_version; @@ -1689,7 +1689,8 @@ static void rtl8169_get_mac_version(struct rtl8169_private *tp, /* Catch-all */ { 0x00000000, 0x00000000, RTL_GIGA_MAC_NONE } - }, *p = mac_info; + }; + const struct rtl_mac_info *p = mac_info; u32 reg; reg = RTL_R32(TxConfig); @@ -3681,7 +3682,7 @@ static void rtl_set_rx_max_size(void __iomem *ioaddr, unsigned int rx_buf_sz) static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version) { - static const struct { + static const struct rtl_cfg2_info { u32 mac_version; u32 clk; u32 val; @@ -3690,7 +3691,8 @@ static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version) { RTL_GIGA_MAC_VER_05, PCI_Clock_66MHz, 0x000fffff }, { RTL_GIGA_MAC_VER_06, PCI_Clock_33MHz, 0x00ffff00 }, // 8110SCe { RTL_GIGA_MAC_VER_06, PCI_Clock_66MHz, 0x00ffffff } - }, *p = cfg2_info; + }; + const struct rtl_cfg2_info *p = cfg2_info; unsigned int i; u32 clk; diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c index 77c5092a6a40..5d3436d47edd 100644 --- a/drivers/net/rionet.c +++ b/drivers/net/rionet.c @@ -378,7 +378,7 @@ static int rionet_close(struct net_device *ndev) static void rionet_remove(struct rio_dev *rdev) { - struct net_device *ndev = NULL; + struct net_device *ndev = rio_get_drvdata(rdev); struct rionet_peer *peer, *tmp; free_pages((unsigned long)rionet_active, rdev->net->hport->sys_size ? @@ -433,22 +433,12 @@ static const struct net_device_ops rionet_netdev_ops = { .ndo_set_mac_address = eth_mac_addr, }; -static int rionet_setup_netdev(struct rio_mport *mport) +static int rionet_setup_netdev(struct rio_mport *mport, struct net_device *ndev) { int rc = 0; - struct net_device *ndev = NULL; struct rionet_private *rnet; u16 device_id; - /* Allocate our net_device structure */ - ndev = alloc_etherdev(sizeof(struct rionet_private)); - if (ndev == NULL) { - printk(KERN_INFO "%s: could not allocate ethernet device.\n", - DRV_NAME); - rc = -ENOMEM; - goto out; - } - rionet_active = (struct rio_dev **)__get_free_pages(GFP_KERNEL, mport->sys_size ? __fls(sizeof(void *)) + 4 : 0); if (!rionet_active) { @@ -504,11 +494,21 @@ static int rionet_probe(struct rio_dev *rdev, const struct rio_device_id *id) int rc = -ENODEV; u32 lpef, lsrc_ops, ldst_ops; struct rionet_peer *peer; + struct net_device *ndev = NULL; /* If local device is not rionet capable, give up quickly */ if (!rionet_capable) goto out; + /* Allocate our net_device structure */ + ndev = alloc_etherdev(sizeof(struct rionet_private)); + if (ndev == NULL) { + printk(KERN_INFO "%s: could not allocate ethernet device.\n", + DRV_NAME); + rc = -ENOMEM; + goto out; + } + /* * First time through, make sure local device is rionet * capable, setup netdev, and set flags so this is skipped @@ -529,7 +529,7 @@ static int rionet_probe(struct rio_dev *rdev, const struct rio_device_id *id) goto out; } - rc = rionet_setup_netdev(rdev->net->hport); + rc = rionet_setup_netdev(rdev->net->hport, ndev); rionet_check = 1; } @@ -546,6 +546,8 @@ static int rionet_probe(struct rio_dev *rdev, const struct rio_device_id *id) list_add_tail(&peer->node, &rionet_peers); } + rio_set_drvdata(rdev, ndev); + out: return rc; } diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index 8a72a979ee71..1f3f7b4dd638 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -140,6 +140,8 @@ static struct sh_eth_cpu_data sh_eth_my_cpu_data = { .tpauser = 1, .hw_swap = 1, .no_ade = 1, + .rpadir = 1, + .rpadir_value = 2 << 16, }; #define SH_GIGA_ETH_BASE 0xfee00000 @@ -1184,8 +1186,8 @@ static void sh_eth_adjust_link(struct net_device *ndev) mdp->cd->set_rate(ndev); } if (mdp->link == PHY_DOWN) { - sh_eth_write(ndev, (sh_eth_read(ndev, ECMR) & ~ECMR_TXF) - | ECMR_DM, ECMR); + sh_eth_write(ndev, + (sh_eth_read(ndev, ECMR) & ~ECMR_TXF), ECMR); new_state = 1; mdp->link = phydev->link; } diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 74e94054ab1a..5235f48be1be 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -460,7 +460,23 @@ static u32 tun_net_fix_features(struct net_device *dev, u32 features) return (features & tun->set_features) | (features & ~TUN_USER_FEATURES); } - +#ifdef CONFIG_NET_POLL_CONTROLLER +static void tun_poll_controller(struct net_device *dev) +{ + /* + * Tun only receives frames when: + * 1) the char device endpoint gets data from user space + * 2) the tun socket gets a sendmsg call from user space + * Since both of those are syncronous operations, we are guaranteed + * never to have pending data when we poll for it + * so theres nothing to do here but return. + * We need this though so netpoll recognizes us as an interface that + * supports polling, which enables bridge devices in virt setups to + * still use netconsole + */ + return; +} +#endif static const struct net_device_ops tun_netdev_ops = { .ndo_uninit = tun_net_uninit, .ndo_open = tun_net_open, @@ -468,6 +484,9 @@ static const struct net_device_ops tun_netdev_ops = { .ndo_start_xmit = tun_net_xmit, .ndo_change_mtu = tun_net_change_mtu, .ndo_fix_features = tun_net_fix_features, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = tun_poll_controller, +#endif }; static const struct net_device_ops tap_netdev_ops = { @@ -480,6 +499,9 @@ static const struct net_device_ops tap_netdev_ops = { .ndo_set_multicast_list = tun_net_mclist, .ndo_set_mac_address = eth_mac_addr, .ndo_validate_addr = eth_validate_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = tun_poll_controller, +#endif }; /* Initialize net device. */ diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index 9d4f9117260f..84d4608153c9 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -385,6 +385,16 @@ config USB_NET_CX82310_ETH router with USB ethernet port. This driver is for routers only, it will not work with ADSL modems (use cxacru driver instead). +config USB_NET_KALMIA + tristate "Samsung Kalmia based LTE USB modem" + depends on USB_USBNET + help + Choose this option if you have a Samsung Kalmia based USB modem + as Samsung GT-B3730. + + To compile this driver as a module, choose M here: the + module will be called kalmia. + config USB_HSO tristate "Option USB High Speed Mobile Devices" depends on USB && RFKILL diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile index c7ec8a5f0a90..c203fa21f6b1 100644 --- a/drivers/net/usb/Makefile +++ b/drivers/net/usb/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_USB_NET_MCS7830) += mcs7830.o obj-$(CONFIG_USB_USBNET) += usbnet.o obj-$(CONFIG_USB_NET_INT51X1) += int51x1.o obj-$(CONFIG_USB_CDC_PHONET) += cdc-phonet.o +obj-$(CONFIG_USB_NET_KALMIA) += kalmia.o obj-$(CONFIG_USB_IPHETH) += ipheth.o obj-$(CONFIG_USB_SIERRA_NET) += sierra_net.o obj-$(CONFIG_USB_NET_CX82310_ETH) += cx82310_eth.o diff --git a/drivers/net/usb/kalmia.c b/drivers/net/usb/kalmia.c new file mode 100644 index 000000000000..a9b6c63d54e4 --- /dev/null +++ b/drivers/net/usb/kalmia.c @@ -0,0 +1,392 @@ +/* + * USB network interface driver for Samsung Kalmia based LTE USB modem like the + * Samsung GT-B3730 and GT-B3710. + * + * Copyright (C) 2011 Marius Bjoernstad Kotsbak <marius@kotsbak.com> + * + * Sponsored by Quicklink Video Distribution Services Ltd. + * + * Based on the cdc_eem module. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ctype.h> +#include <linux/ethtool.h> +#include <linux/workqueue.h> +#include <linux/mii.h> +#include <linux/usb.h> +#include <linux/crc32.h> +#include <linux/usb/cdc.h> +#include <linux/usb/usbnet.h> +#include <linux/gfp.h> + +/* + * The Samsung Kalmia based LTE USB modems have a CDC ACM port for modem control + * handled by the "option" module and an ethernet data port handled by this + * module. + * + * The stick must first be switched into modem mode by usb_modeswitch + * or similar tool. Then the modem gets sent two initialization packets by + * this module, which gives the MAC address of the device. User space can then + * connect the modem using AT commands through the ACM port and then use + * DHCP on the network interface exposed by this module. Network packets are + * sent to and from the modem in a proprietary format discovered after watching + * the behavior of the windows driver for the modem. + * + * More information about the use of the modem is available in usb_modeswitch + * forum and the project page: + * + * http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=465 + * https://github.com/mkotsbak/Samsung-GT-B3730-linux-driver + */ + +/* #define DEBUG */ +/* #define VERBOSE */ + +#define KALMIA_HEADER_LENGTH 6 +#define KALMIA_ALIGN_SIZE 4 +#define KALMIA_USB_TIMEOUT 10000 + +/*-------------------------------------------------------------------------*/ + +static int +kalmia_send_init_packet(struct usbnet *dev, u8 *init_msg, u8 init_msg_len, + u8 *buffer, u8 expected_len) +{ + int act_len; + int status; + + netdev_dbg(dev->net, "Sending init packet"); + + status = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, 0x02), + init_msg, init_msg_len, &act_len, KALMIA_USB_TIMEOUT); + if (status != 0) { + netdev_err(dev->net, + "Error sending init packet. Status %i, length %i\n", + status, act_len); + return status; + } + else if (act_len != init_msg_len) { + netdev_err(dev->net, + "Did not send all of init packet. Bytes sent: %i", + act_len); + } + else { + netdev_dbg(dev->net, "Successfully sent init packet."); + } + + status = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, 0x81), + buffer, expected_len, &act_len, KALMIA_USB_TIMEOUT); + + if (status != 0) + netdev_err(dev->net, + "Error receiving init result. Status %i, length %i\n", + status, act_len); + else if (act_len != expected_len) + netdev_err(dev->net, "Unexpected init result length: %i\n", + act_len); + + return status; +} + +static int +kalmia_init_and_get_ethernet_addr(struct usbnet *dev, u8 *ethernet_addr) +{ + const static char init_msg_1[] = + { 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, + 0x00, 0x00 }; + const static char init_msg_2[] = + { 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0xf4, + 0x00, 0x00 }; + const static int buflen = 28; + char *usb_buf; + int status; + + usb_buf = kmalloc(buflen, GFP_DMA | GFP_KERNEL); + if (!usb_buf) + return -ENOMEM; + + memcpy(usb_buf, init_msg_1, 12); + status = kalmia_send_init_packet(dev, usb_buf, sizeof(init_msg_1) + / sizeof(init_msg_1[0]), usb_buf, 24); + if (status != 0) + return status; + + memcpy(usb_buf, init_msg_2, 12); + status = kalmia_send_init_packet(dev, usb_buf, sizeof(init_msg_2) + / sizeof(init_msg_2[0]), usb_buf, 28); + if (status != 0) + return status; + + memcpy(ethernet_addr, usb_buf + 10, ETH_ALEN); + + kfree(usb_buf); + return status; +} + +static int +kalmia_bind(struct usbnet *dev, struct usb_interface *intf) +{ + int status; + u8 ethernet_addr[ETH_ALEN]; + + /* Don't bind to AT command interface */ + if (intf->cur_altsetting->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC) + return -EINVAL; + + dev->in = usb_rcvbulkpipe(dev->udev, 0x81 & USB_ENDPOINT_NUMBER_MASK); + dev->out = usb_sndbulkpipe(dev->udev, 0x02 & USB_ENDPOINT_NUMBER_MASK); + dev->status = NULL; + + dev->net->hard_header_len += KALMIA_HEADER_LENGTH; + dev->hard_mtu = 1400; + dev->rx_urb_size = dev->hard_mtu * 10; // Found as optimal after testing + + status = kalmia_init_and_get_ethernet_addr(dev, ethernet_addr); + + if (status < 0) { + usb_set_intfdata(intf, NULL); + usb_driver_release_interface(driver_of(intf), intf); + return status; + } + + memcpy(dev->net->dev_addr, ethernet_addr, ETH_ALEN); + memcpy(dev->net->perm_addr, ethernet_addr, ETH_ALEN); + + return status; +} + +static struct sk_buff * +kalmia_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags) +{ + struct sk_buff *skb2 = NULL; + u16 content_len; + unsigned char *header_start; + unsigned char ether_type_1, ether_type_2; + u8 remainder, padlen = 0; + + if (!skb_cloned(skb)) { + int headroom = skb_headroom(skb); + int tailroom = skb_tailroom(skb); + + if ((tailroom >= KALMIA_ALIGN_SIZE) && (headroom + >= KALMIA_HEADER_LENGTH)) + goto done; + + if ((headroom + tailroom) > (KALMIA_HEADER_LENGTH + + KALMIA_ALIGN_SIZE)) { + skb->data = memmove(skb->head + KALMIA_HEADER_LENGTH, + skb->data, skb->len); + skb_set_tail_pointer(skb, skb->len); + goto done; + } + } + + skb2 = skb_copy_expand(skb, KALMIA_HEADER_LENGTH, + KALMIA_ALIGN_SIZE, flags); + if (!skb2) + return NULL; + + dev_kfree_skb_any(skb); + skb = skb2; + +done: + header_start = skb_push(skb, KALMIA_HEADER_LENGTH); + ether_type_1 = header_start[KALMIA_HEADER_LENGTH + 12]; + ether_type_2 = header_start[KALMIA_HEADER_LENGTH + 13]; + + netdev_dbg(dev->net, "Sending etherType: %02x%02x", ether_type_1, + ether_type_2); + + /* According to empiric data for data packages */ + header_start[0] = 0x57; + header_start[1] = 0x44; + content_len = skb->len - KALMIA_HEADER_LENGTH; + + put_unaligned_le16(content_len, &header_start[2]); + header_start[4] = ether_type_1; + header_start[5] = ether_type_2; + + /* Align to 4 bytes by padding with zeros */ + remainder = skb->len % KALMIA_ALIGN_SIZE; + if (remainder > 0) { + padlen = KALMIA_ALIGN_SIZE - remainder; + memset(skb_put(skb, padlen), 0, padlen); + } + + netdev_dbg( + dev->net, + "Sending package with length %i and padding %i. Header: %02x:%02x:%02x:%02x:%02x:%02x.", + content_len, padlen, header_start[0], header_start[1], + header_start[2], header_start[3], header_start[4], + header_start[5]); + + return skb; +} + +static int +kalmia_rx_fixup(struct usbnet *dev, struct sk_buff *skb) +{ + /* + * Our task here is to strip off framing, leaving skb with one + * data frame for the usbnet framework code to process. + */ + const static u8 HEADER_END_OF_USB_PACKET[] = + { 0x57, 0x5a, 0x00, 0x00, 0x08, 0x00 }; + const static u8 EXPECTED_UNKNOWN_HEADER_1[] = + { 0x57, 0x43, 0x1e, 0x00, 0x15, 0x02 }; + const static u8 EXPECTED_UNKNOWN_HEADER_2[] = + { 0x57, 0x50, 0x0e, 0x00, 0x00, 0x00 }; + int i = 0; + + /* incomplete header? */ + if (skb->len < KALMIA_HEADER_LENGTH) + return 0; + + do { + struct sk_buff *skb2 = NULL; + u8 *header_start; + u16 usb_packet_length, ether_packet_length; + int is_last; + + header_start = skb->data; + + if (unlikely(header_start[0] != 0x57 || header_start[1] != 0x44)) { + if (!memcmp(header_start, EXPECTED_UNKNOWN_HEADER_1, + sizeof(EXPECTED_UNKNOWN_HEADER_1)) || !memcmp( + header_start, EXPECTED_UNKNOWN_HEADER_2, + sizeof(EXPECTED_UNKNOWN_HEADER_2))) { + netdev_dbg( + dev->net, + "Received expected unknown frame header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n", + header_start[0], header_start[1], + header_start[2], header_start[3], + header_start[4], header_start[5], + skb->len - KALMIA_HEADER_LENGTH); + } + else { + netdev_err( + dev->net, + "Received unknown frame header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n", + header_start[0], header_start[1], + header_start[2], header_start[3], + header_start[4], header_start[5], + skb->len - KALMIA_HEADER_LENGTH); + return 0; + } + } + else + netdev_dbg( + dev->net, + "Received header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n", + header_start[0], header_start[1], header_start[2], + header_start[3], header_start[4], header_start[5], + skb->len - KALMIA_HEADER_LENGTH); + + /* subtract start header and end header */ + usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH); + ether_packet_length = get_unaligned_le16(&header_start[2]); + skb_pull(skb, KALMIA_HEADER_LENGTH); + + /* Some small packets misses end marker */ + if (usb_packet_length < ether_packet_length) { + ether_packet_length = usb_packet_length + + KALMIA_HEADER_LENGTH; + is_last = true; + } + else { + netdev_dbg(dev->net, "Correct package length #%i", i + + 1); + + is_last = (memcmp(skb->data + ether_packet_length, + HEADER_END_OF_USB_PACKET, + sizeof(HEADER_END_OF_USB_PACKET)) == 0); + if (!is_last) { + header_start = skb->data + ether_packet_length; + netdev_dbg( + dev->net, + "End header: %02x:%02x:%02x:%02x:%02x:%02x. Package length: %i\n", + header_start[0], header_start[1], + header_start[2], header_start[3], + header_start[4], header_start[5], + skb->len - KALMIA_HEADER_LENGTH); + } + } + + if (is_last) { + skb2 = skb; + } + else { + skb2 = skb_clone(skb, GFP_ATOMIC); + if (unlikely(!skb2)) + return 0; + } + + skb_trim(skb2, ether_packet_length); + + if (is_last) { + return 1; + } + else { + usbnet_skb_return(dev, skb2); + skb_pull(skb, ether_packet_length); + } + + i++; + } + while (skb->len); + + return 1; +} + +static const struct driver_info kalmia_info = { + .description = "Samsung Kalmia LTE USB dongle", + .flags = FLAG_WWAN, + .bind = kalmia_bind, + .rx_fixup = kalmia_rx_fixup, + .tx_fixup = kalmia_tx_fixup +}; + +/*-------------------------------------------------------------------------*/ + +static const struct usb_device_id products[] = { + /* The unswitched USB ID, to get the module auto loaded: */ + { USB_DEVICE(0x04e8, 0x689a) }, + /* The stick swithed into modem (by e.g. usb_modeswitch): */ + { USB_DEVICE(0x04e8, 0x6889), + .driver_info = (unsigned long) &kalmia_info, }, + { /* EMPTY == end of list */} }; +MODULE_DEVICE_TABLE( usb, products); + +static struct usb_driver kalmia_driver = { + .name = "kalmia", + .id_table = products, + .probe = usbnet_probe, + .disconnect = usbnet_disconnect, + .suspend = usbnet_suspend, + .resume = usbnet_resume +}; + +static int __init kalmia_init(void) +{ + return usb_register(&kalmia_driver); +} +module_init( kalmia_init); + +static void __exit kalmia_exit(void) +{ + usb_deregister(&kalmia_driver); +} +module_exit( kalmia_exit); + +MODULE_AUTHOR("Marius Bjoernstad Kotsbak <marius@kotsbak.com>"); +MODULE_DESCRIPTION("Samsung Kalmia USB network driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/usb/zaurus.c b/drivers/net/usb/zaurus.c index 241756e0e86f..1a2234c20514 100644 --- a/drivers/net/usb/zaurus.c +++ b/drivers/net/usb/zaurus.c @@ -331,17 +331,7 @@ static const struct usb_device_id products [] = { ZAURUS_MASTER_INTERFACE, .driver_info = ZAURUS_PXA_INFO, }, - - -/* At least some of the newest PXA units have very different lies about - * their standards support: they claim to be cell phones offering - * direct access to their radios! (No, they don't conform to CDC MDLM.) - */ { - USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, - USB_CDC_PROTO_NONE), - .driver_info = (unsigned long) &bogus_mdlm_info, -}, { /* Motorola MOTOMAGX phones */ USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6425, USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index fa6e2ac7475a..67402350d0df 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -575,7 +575,7 @@ vmxnet3_rq_alloc_rx_buf(struct vmxnet3_rx_queue *rq, u32 ring_idx, struct vmxnet3_cmd_ring *ring = &rq->rx_ring[ring_idx]; u32 val; - while (num_allocated < num_to_alloc) { + while (num_allocated <= num_to_alloc) { struct vmxnet3_rx_buf_info *rbi; union Vmxnet3_GenericDesc *gd; @@ -621,9 +621,15 @@ vmxnet3_rq_alloc_rx_buf(struct vmxnet3_rx_queue *rq, u32 ring_idx, BUG_ON(rbi->dma_addr == 0); gd->rxd.addr = cpu_to_le64(rbi->dma_addr); - gd->dword[2] = cpu_to_le32((ring->gen << VMXNET3_RXD_GEN_SHIFT) + gd->dword[2] = cpu_to_le32((!ring->gen << VMXNET3_RXD_GEN_SHIFT) | val | rbi->len); + /* Fill the last buffer but dont mark it ready, or else the + * device will think that the queue is full */ + if (num_allocated == num_to_alloc) + break; + + gd->dword[2] |= cpu_to_le32(ring->gen << VMXNET3_RXD_GEN_SHIFT); num_allocated++; vmxnet3_cmd_ring_adv_next2fill(ring); } @@ -1140,6 +1146,7 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq, VMXNET3_REG_RXPROD, VMXNET3_REG_RXPROD2 }; u32 num_rxd = 0; + bool skip_page_frags = false; struct Vmxnet3_RxCompDesc *rcd; struct vmxnet3_rx_ctx *ctx = &rq->rx_ctx; #ifdef __BIG_ENDIAN_BITFIELD @@ -1150,11 +1157,12 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq, &rxComp); while (rcd->gen == rq->comp_ring.gen) { struct vmxnet3_rx_buf_info *rbi; - struct sk_buff *skb; + struct sk_buff *skb, *new_skb = NULL; + struct page *new_page = NULL; int num_to_alloc; struct Vmxnet3_RxDesc *rxd; u32 idx, ring_idx; - + struct vmxnet3_cmd_ring *ring = NULL; if (num_rxd >= quota) { /* we may stop even before we see the EOP desc of * the current pkt @@ -1165,6 +1173,7 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq, BUG_ON(rcd->rqID != rq->qid && rcd->rqID != rq->qid2); idx = rcd->rxdIdx; ring_idx = rcd->rqID < adapter->num_rx_queues ? 0 : 1; + ring = rq->rx_ring + ring_idx; vmxnet3_getRxDesc(rxd, &rq->rx_ring[ring_idx].base[idx].rxd, &rxCmdDesc); rbi = rq->buf_info[ring_idx] + idx; @@ -1193,37 +1202,80 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq, goto rcd_done; } + skip_page_frags = false; ctx->skb = rbi->skb; - rbi->skb = NULL; + new_skb = dev_alloc_skb(rbi->len + NET_IP_ALIGN); + if (new_skb == NULL) { + /* Skb allocation failed, do not handover this + * skb to stack. Reuse it. Drop the existing pkt + */ + rq->stats.rx_buf_alloc_failure++; + ctx->skb = NULL; + rq->stats.drop_total++; + skip_page_frags = true; + goto rcd_done; + } pci_unmap_single(adapter->pdev, rbi->dma_addr, rbi->len, PCI_DMA_FROMDEVICE); skb_put(ctx->skb, rcd->len); + + /* Immediate refill */ + new_skb->dev = adapter->netdev; + skb_reserve(new_skb, NET_IP_ALIGN); + rbi->skb = new_skb; + rbi->dma_addr = pci_map_single(adapter->pdev, + rbi->skb->data, rbi->len, + PCI_DMA_FROMDEVICE); + rxd->addr = cpu_to_le64(rbi->dma_addr); + rxd->len = rbi->len; + } else { - BUG_ON(ctx->skb == NULL); + BUG_ON(ctx->skb == NULL && !skip_page_frags); + /* non SOP buffer must be type 1 in most cases */ - if (rbi->buf_type == VMXNET3_RX_BUF_PAGE) { - BUG_ON(rxd->btype != VMXNET3_RXD_BTYPE_BODY); + BUG_ON(rbi->buf_type != VMXNET3_RX_BUF_PAGE); + BUG_ON(rxd->btype != VMXNET3_RXD_BTYPE_BODY); - if (rcd->len) { - pci_unmap_page(adapter->pdev, - rbi->dma_addr, rbi->len, - PCI_DMA_FROMDEVICE); + /* If an sop buffer was dropped, skip all + * following non-sop fragments. They will be reused. + */ + if (skip_page_frags) + goto rcd_done; - vmxnet3_append_frag(ctx->skb, rcd, rbi); - rbi->page = NULL; - } - } else { - /* - * The only time a non-SOP buffer is type 0 is - * when it's EOP and error flag is raised, which - * has already been handled. + new_page = alloc_page(GFP_ATOMIC); + if (unlikely(new_page == NULL)) { + /* Replacement page frag could not be allocated. + * Reuse this page. Drop the pkt and free the + * skb which contained this page as a frag. Skip + * processing all the following non-sop frags. */ - BUG_ON(true); + rq->stats.rx_buf_alloc_failure++; + dev_kfree_skb(ctx->skb); + ctx->skb = NULL; + skip_page_frags = true; + goto rcd_done; + } + + if (rcd->len) { + pci_unmap_page(adapter->pdev, + rbi->dma_addr, rbi->len, + PCI_DMA_FROMDEVICE); + + vmxnet3_append_frag(ctx->skb, rcd, rbi); } + + /* Immediate refill */ + rbi->page = new_page; + rbi->dma_addr = pci_map_page(adapter->pdev, rbi->page, + 0, PAGE_SIZE, + PCI_DMA_FROMDEVICE); + rxd->addr = cpu_to_le64(rbi->dma_addr); + rxd->len = rbi->len; } + skb = ctx->skb; if (rcd->eop) { skb->len += skb->data_len; @@ -1244,26 +1296,27 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq, } rcd_done: - /* device may skip some rx descs */ - rq->rx_ring[ring_idx].next2comp = idx; - VMXNET3_INC_RING_IDX_ONLY(rq->rx_ring[ring_idx].next2comp, - rq->rx_ring[ring_idx].size); - - /* refill rx buffers frequently to avoid starving the h/w */ - num_to_alloc = vmxnet3_cmd_ring_desc_avail(rq->rx_ring + - ring_idx); - if (unlikely(num_to_alloc > VMXNET3_RX_ALLOC_THRESHOLD(rq, - ring_idx, adapter))) { - vmxnet3_rq_alloc_rx_buf(rq, ring_idx, num_to_alloc, - adapter); - - /* if needed, update the register */ - if (unlikely(rq->shared->updateRxProd)) { - VMXNET3_WRITE_BAR0_REG(adapter, - rxprod_reg[ring_idx] + rq->qid * 8, - rq->rx_ring[ring_idx].next2fill); - rq->uncommitted[ring_idx] = 0; - } + /* device may have skipped some rx descs */ + ring->next2comp = idx; + num_to_alloc = vmxnet3_cmd_ring_desc_avail(ring); + ring = rq->rx_ring + ring_idx; + while (num_to_alloc) { + vmxnet3_getRxDesc(rxd, &ring->base[ring->next2fill].rxd, + &rxCmdDesc); + BUG_ON(!rxd->addr); + + /* Recv desc is ready to be used by the device */ + rxd->gen = ring->gen; + vmxnet3_cmd_ring_adv_next2fill(ring); + num_to_alloc--; + } + + /* if needed, update the register */ + if (unlikely(rq->shared->updateRxProd)) { + VMXNET3_WRITE_BAR0_REG(adapter, + rxprod_reg[ring_idx] + rq->qid * 8, + ring->next2fill); + rq->uncommitted[ring_idx] = 0; } vmxnet3_comp_ring_adv_next2proc(&rq->comp_ring); @@ -2894,6 +2947,7 @@ vmxnet3_probe_device(struct pci_dev *pdev, else #endif num_rx_queues = 1; + num_rx_queues = rounddown_pow_of_two(num_rx_queues); if (enable_mq) num_tx_queues = min(VMXNET3_DEVICE_MAX_TX_QUEUES, @@ -2901,6 +2955,7 @@ vmxnet3_probe_device(struct pci_dev *pdev, else num_tx_queues = 1; + num_tx_queues = rounddown_pow_of_two(num_tx_queues); netdev = alloc_etherdev_mq(sizeof(struct vmxnet3_adapter), max(num_tx_queues, num_rx_queues)); printk(KERN_INFO "# of Tx queues : %d, # of Rx queues : %d\n", @@ -3085,6 +3140,7 @@ vmxnet3_remove_device(struct pci_dev *pdev) else #endif num_rx_queues = 1; + num_rx_queues = rounddown_pow_of_two(num_rx_queues); cancel_work_sync(&adapter->work); diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h index f50d36fdf405..e08d75e3f170 100644 --- a/drivers/net/vmxnet3/vmxnet3_int.h +++ b/drivers/net/vmxnet3/vmxnet3_int.h @@ -55,6 +55,7 @@ #include <linux/if_vlan.h> #include <linux/if_arp.h> #include <linux/inetdevice.h> +#include <linux/log2.h> #include "vmxnet3_defs.h" @@ -68,10 +69,10 @@ /* * Version numbers */ -#define VMXNET3_DRIVER_VERSION_STRING "1.1.9.0-k" +#define VMXNET3_DRIVER_VERSION_STRING "1.1.18.0-k" /* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */ -#define VMXNET3_DRIVER_VERSION_NUM 0x01010900 +#define VMXNET3_DRIVER_VERSION_NUM 0x01011200 #if defined(CONFIG_PCI_MSI) /* RSS only makes sense if MSI-X is supported. */ diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c index e050bd65e037..777d1a4e81b2 100644 --- a/drivers/net/wan/farsync.c +++ b/drivers/net/wan/farsync.c @@ -2203,8 +2203,10 @@ fst_open(struct net_device *dev) if (port->mode != FST_RAW) { err = hdlc_open(dev); - if (err) + if (err) { + module_put(THIS_MODULE); return err; + } } fst_openport(port); diff --git a/drivers/net/wireless/ath/ath5k/desc.c b/drivers/net/wireless/ath/ath5k/desc.c index 62172d585723..f82383b3ed30 100644 --- a/drivers/net/wireless/ath/ath5k/desc.c +++ b/drivers/net/wireless/ath/ath5k/desc.c @@ -107,10 +107,13 @@ ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, case AR5K_PKT_TYPE_BEACON: case AR5K_PKT_TYPE_PROBE_RESP: frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY; + break; case AR5K_PKT_TYPE_PIFS: frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS; + break; default: frame_type = type; + break; } tx_ctl->tx_control_0 |= diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c index 1fef84f87c78..392771f93759 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.c +++ b/drivers/net/wireless/ath/ath5k/eeprom.c @@ -691,14 +691,12 @@ ath5k_eeprom_free_pcal_info(struct ath5k_hw *ah, int mode) if (!chinfo[pier].pd_curves) continue; - for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) { + for (pdg = 0; pdg < AR5K_EEPROM_N_PD_CURVES; pdg++) { struct ath5k_pdgain_info *pd = &chinfo[pier].pd_curves[pdg]; - if (pd != NULL) { - kfree(pd->pd_step); - kfree(pd->pd_pwr); - } + kfree(pd->pd_step); + kfree(pd->pd_pwr); } kfree(chinfo[pier].pd_curves); diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index b8cbfc707213..3bad0b2cf9a3 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -278,6 +278,12 @@ static int ath_pci_suspend(struct device *device) ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1); + /* The device has to be moved to FULLSLEEP forcibly. + * Otherwise the chip never moved to full sleep, + * when no interface is up. + */ + ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP); + return 0; } diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c index 61d4a11f566b..2a88e73bb39c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-1000.c +++ b/drivers/net/wireless/iwlwifi/iwl-1000.c @@ -36,6 +36,7 @@ #include <net/mac80211.h> #include <linux/etherdevice.h> #include <asm/unaligned.h> +#include <linux/stringify.h> #include "iwl-eeprom.h" #include "iwl-dev.h" @@ -55,10 +56,10 @@ #define IWL100_UCODE_API_MIN 5 #define IWL1000_FW_PRE "iwlwifi-1000-" -#define IWL1000_MODULE_FIRMWARE(api) IWL1000_FW_PRE #api ".ucode" +#define IWL1000_MODULE_FIRMWARE(api) IWL1000_FW_PRE __stringify(api) ".ucode" #define IWL100_FW_PRE "iwlwifi-100-" -#define IWL100_MODULE_FIRMWARE(api) IWL100_FW_PRE #api ".ucode" +#define IWL100_MODULE_FIRMWARE(api) IWL100_FW_PRE __stringify(api) ".ucode" /* diff --git a/drivers/net/wireless/iwlwifi/iwl-2000.c b/drivers/net/wireless/iwlwifi/iwl-2000.c index 2282279cffc4..3df76f53a41b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-2000.c +++ b/drivers/net/wireless/iwlwifi/iwl-2000.c @@ -36,6 +36,7 @@ #include <net/mac80211.h> #include <linux/etherdevice.h> #include <asm/unaligned.h> +#include <linux/stringify.h> #include "iwl-eeprom.h" #include "iwl-dev.h" @@ -58,13 +59,13 @@ #define IWL105_UCODE_API_MIN 5 #define IWL2030_FW_PRE "iwlwifi-2030-" -#define IWL2030_MODULE_FIRMWARE(api) IWL2030_FW_PRE #api ".ucode" +#define IWL2030_MODULE_FIRMWARE(api) IWL2030_FW_PRE __stringify(api) ".ucode" #define IWL2000_FW_PRE "iwlwifi-2000-" -#define IWL2000_MODULE_FIRMWARE(api) IWL2000_FW_PRE #api ".ucode" +#define IWL2000_MODULE_FIRMWARE(api) IWL2000_FW_PRE __stringify(api) ".ucode" #define IWL105_FW_PRE "iwlwifi-105-" -#define IWL105_MODULE_FIRMWARE(api) IWL105_FW_PRE #api ".ucode" +#define IWL105_MODULE_FIRMWARE(api) IWL105_FW_PRE __stringify(api) ".ucode" static void iwl2000_set_ct_threshold(struct iwl_priv *priv) { diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index f99f9c193352..e816c27db794 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -37,6 +37,7 @@ #include <net/mac80211.h> #include <linux/etherdevice.h> #include <asm/unaligned.h> +#include <linux/stringify.h> #include "iwl-eeprom.h" #include "iwl-dev.h" @@ -57,10 +58,10 @@ #define IWL5150_UCODE_API_MIN 1 #define IWL5000_FW_PRE "iwlwifi-5000-" -#define IWL5000_MODULE_FIRMWARE(api) IWL5000_FW_PRE #api ".ucode" +#define IWL5000_MODULE_FIRMWARE(api) IWL5000_FW_PRE __stringify(api) ".ucode" #define IWL5150_FW_PRE "iwlwifi-5150-" -#define IWL5150_MODULE_FIRMWARE(api) IWL5150_FW_PRE #api ".ucode" +#define IWL5150_MODULE_FIRMWARE(api) IWL5150_FW_PRE __stringify(api) ".ucode" /* NIC configuration for 5000 series */ static void iwl5000_nic_config(struct iwl_priv *priv) diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index fbe565c816e3..5b150bc70b06 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -36,6 +36,7 @@ #include <net/mac80211.h> #include <linux/etherdevice.h> #include <asm/unaligned.h> +#include <linux/stringify.h> #include "iwl-eeprom.h" #include "iwl-dev.h" @@ -58,16 +59,16 @@ #define IWL6000G2_UCODE_API_MIN 4 #define IWL6000_FW_PRE "iwlwifi-6000-" -#define IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE #api ".ucode" +#define IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE __stringify(api) ".ucode" #define IWL6050_FW_PRE "iwlwifi-6050-" -#define IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE #api ".ucode" +#define IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE __stringify(api) ".ucode" #define IWL6005_FW_PRE "iwlwifi-6000g2a-" -#define IWL6005_MODULE_FIRMWARE(api) IWL6005_FW_PRE #api ".ucode" +#define IWL6005_MODULE_FIRMWARE(api) IWL6005_FW_PRE __stringify(api) ".ucode" #define IWL6030_FW_PRE "iwlwifi-6000g2b-" -#define IWL6030_MODULE_FIRMWARE(api) IWL6030_FW_PRE #api ".ucode" +#define IWL6030_MODULE_FIRMWARE(api) IWL6030_FW_PRE __stringify(api) ".ucode" static void iwl6000_set_ct_threshold(struct iwl_priv *priv) { diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 213c80c6a668..45cc51c9c93e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -1763,6 +1763,7 @@ int iwl_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif); struct iwl_rxon_context *bss_ctx = &priv->contexts[IWL_RXON_CTX_BSS]; struct iwl_rxon_context *tmp; + enum nl80211_iftype newviftype = newtype; u32 interface_modes; int err; @@ -1818,7 +1819,7 @@ int iwl_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, /* success */ iwl_teardown_interface(priv, vif, true); - vif->type = newtype; + vif->type = newviftype; vif->p2p = newp2p; err = iwl_setup_interface(priv, ctx); WARN_ON(err); diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 686e176b5ebd..137dba95b1ad 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -126,7 +126,7 @@ static inline u8 iwl_tfd_get_num_tbs(struct iwl_tfd *tfd) } static void iwlagn_unmap_tfd(struct iwl_priv *priv, struct iwl_cmd_meta *meta, - struct iwl_tfd *tfd) + struct iwl_tfd *tfd, int dma_dir) { struct pci_dev *dev = priv->pci_dev; int i; @@ -151,7 +151,7 @@ static void iwlagn_unmap_tfd(struct iwl_priv *priv, struct iwl_cmd_meta *meta, /* Unmap chunks, if any. */ for (i = 1; i < num_tbs; i++) pci_unmap_single(dev, iwl_tfd_tb_get_addr(tfd, i), - iwl_tfd_tb_get_len(tfd, i), PCI_DMA_TODEVICE); + iwl_tfd_tb_get_len(tfd, i), dma_dir); } /** @@ -167,7 +167,8 @@ void iwlagn_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq) struct iwl_tfd *tfd_tmp = txq->tfds; int index = txq->q.read_ptr; - iwlagn_unmap_tfd(priv, &txq->meta[index], &tfd_tmp[index]); + iwlagn_unmap_tfd(priv, &txq->meta[index], &tfd_tmp[index], + PCI_DMA_TODEVICE); /* free SKB */ if (txq->txb) { @@ -310,9 +311,7 @@ void iwl_cmd_queue_unmap(struct iwl_priv *priv) i = get_cmd_index(q, q->read_ptr); if (txq->meta[i].flags & CMD_MAPPED) { - pci_unmap_single(priv->pci_dev, - dma_unmap_addr(&txq->meta[i], mapping), - dma_unmap_len(&txq->meta[i], len), + iwlagn_unmap_tfd(priv, &txq->meta[i], &txq->tfds[i], PCI_DMA_BIDIRECTIONAL); txq->meta[i].flags = 0; } @@ -535,12 +534,7 @@ out_free_arrays: void iwl_tx_queue_reset(struct iwl_priv *priv, struct iwl_tx_queue *txq, int slots_num, u32 txq_id) { - int actual_slots = slots_num; - - if (txq_id == priv->cmd_queue) - actual_slots++; - - memset(txq->meta, 0, sizeof(struct iwl_cmd_meta) * actual_slots); + memset(txq->meta, 0, sizeof(struct iwl_cmd_meta) * slots_num); txq->need_update = 0; @@ -700,10 +694,11 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) if (!(cmd->dataflags[i] & IWL_HCMD_DFL_NOCOPY)) continue; phys_addr = pci_map_single(priv->pci_dev, (void *)cmd->data[i], - cmd->len[i], PCI_DMA_TODEVICE); + cmd->len[i], PCI_DMA_BIDIRECTIONAL); if (pci_dma_mapping_error(priv->pci_dev, phys_addr)) { iwlagn_unmap_tfd(priv, out_meta, - &txq->tfds[q->write_ptr]); + &txq->tfds[q->write_ptr], + PCI_DMA_BIDIRECTIONAL); idx = -ENOMEM; goto out; } @@ -807,7 +802,7 @@ void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) cmd = txq->cmd[cmd_index]; meta = &txq->meta[cmd_index]; - iwlagn_unmap_tfd(priv, meta, &txq->tfds[index]); + iwlagn_unmap_tfd(priv, meta, &txq->tfds[index], PCI_DMA_BIDIRECTIONAL); /* Input error checking is done when commands are added to queue. */ if (meta->flags & CMD_WANT_SKB) { diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index 660831ce293c..687c1f223497 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1288,6 +1288,8 @@ int mwifiex_register_cfg80211(struct net_device *dev, u8 *mac, *(unsigned long *) wdev_priv = (unsigned long) priv; + set_wiphy_dev(wdev->wiphy, (struct device *) priv->adapter->dev); + ret = wiphy_register(wdev->wiphy); if (ret < 0) { dev_err(priv->adapter->dev, "%s: registering cfg80211 device\n", diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 32261189bcef..aeac3cc4dbe4 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -2474,6 +2474,7 @@ struct mwl8k_cmd_set_hw_spec { * faster client. */ #define MWL8K_SET_HW_SPEC_FLAG_ENABLE_LIFE_TIME_EXPIRY 0x00000400 +#define MWL8K_SET_HW_SPEC_FLAG_GENERATE_CCMP_HDR 0x00000200 #define MWL8K_SET_HW_SPEC_FLAG_HOST_DECR_MGMT 0x00000080 #define MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_PROBERESP 0x00000020 #define MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_BEACON 0x00000010 @@ -2510,7 +2511,8 @@ static int mwl8k_cmd_set_hw_spec(struct ieee80211_hw *hw) cmd->flags = cpu_to_le32(MWL8K_SET_HW_SPEC_FLAG_HOST_DECR_MGMT | MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_PROBERESP | MWL8K_SET_HW_SPEC_FLAG_HOSTFORM_BEACON | - MWL8K_SET_HW_SPEC_FLAG_ENABLE_LIFE_TIME_EXPIRY); + MWL8K_SET_HW_SPEC_FLAG_ENABLE_LIFE_TIME_EXPIRY | + MWL8K_SET_HW_SPEC_FLAG_GENERATE_CCMP_HDR); cmd->num_tx_desc_per_queue = cpu_to_le32(MWL8K_TX_DESCS); cmd->total_rxd = cpu_to_le32(MWL8K_RX_DESCS); diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index 9f8ccae93317..254b64ba4bf6 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -1624,6 +1624,16 @@ static bool _rtl_pci_find_adapter(struct pci_dev *pdev, pci_read_config_byte(pdev, 0x8, &revisionid); pci_read_config_word(pdev, 0x3C, &irqline); + /* PCI ID 0x10ec:0x8192 occurs for both RTL8192E, which uses + * r8192e_pci, and RTL8192SE, which uses this driver. If the + * revision ID is RTL_PCI_REVISION_ID_8192PCIE (0x01), then + * the correct driver is r8192e_pci, thus this routine should + * return false. + */ + if (deviceid == RTL_PCI_8192SE_DID && + revisionid == RTL_PCI_REVISION_ID_8192PCIE) + return false; + if (deviceid == RTL_PCI_8192_DID || deviceid == RTL_PCI_0044_DID || deviceid == RTL_PCI_0047_DID || @@ -1856,7 +1866,8 @@ int __devinit rtl_pci_probe(struct pci_dev *pdev, pci_write_config_byte(pdev, 0x04, 0x07); /* find adapter */ - _rtl_pci_find_adapter(pdev, hw); + if (!_rtl_pci_find_adapter(pdev, hw)) + goto fail3; /* Init IO handler */ _rtl_pci_io_handler_init(&pdev->dev, hw); diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c index bee7c1480f63..092e342c19df 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c @@ -53,6 +53,8 @@ MODULE_FIRMWARE("rtlwifi/rtl8192cufw.bin"); static int rtl92cu_init_sw_vars(struct ieee80211_hw *hw) { struct rtl_priv *rtlpriv = rtl_priv(hw); + const struct firmware *firmware; + int err; rtlpriv->dm.dm_initialgain_enable = 1; rtlpriv->dm.dm_flag = 0; @@ -64,6 +66,24 @@ static int rtl92cu_init_sw_vars(struct ieee80211_hw *hw) ("Can't alloc buffer for fw.\n")); return 1; } + /* request fw */ + err = request_firmware(&firmware, rtlpriv->cfg->fw_name, + rtlpriv->io.dev); + if (err) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("Failed to request firmware!\n")); + return 1; + } + if (firmware->size > 0x4000) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("Firmware is too big!\n")); + release_firmware(firmware); + return 1; + } + memcpy(rtlpriv->rtlhal.pfirmware, firmware->data, firmware->size); + rtlpriv->rtlhal.fwsize = firmware->size; + release_firmware(firmware); + return 0; } diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 135df164a4c1..46767c53917a 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -624,7 +624,7 @@ static int pci_pm_prepare(struct device *dev) * system from the sleep state, we'll have to prevent it from signaling * wake-up. */ - pm_runtime_resume(dev); + pm_runtime_get_sync(dev); if (drv && drv->pm && drv->pm->prepare) error = drv->pm->prepare(dev); @@ -638,6 +638,8 @@ static void pci_pm_complete(struct device *dev) if (drv && drv->pm && drv->pm->complete) drv->pm->complete(dev); + + pm_runtime_put_sync(dev); } #else /* !CONFIG_PM_SLEEP */ diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 5f10c23dff94..692671b11667 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -3284,7 +3284,7 @@ static int pci_set_vga_state_arch(struct pci_dev *dev, bool decode, * @dev: the PCI device * @decode: true = enable decoding, false = disable decoding * @command_bits: PCI_COMMAND_IO and/or PCI_COMMAND_MEMORY - * @change_bridge_flags: traverse ancestors and change bridges + * @flags: traverse ancestors and change bridges * CHANGE_BRIDGE_ONLY / CHANGE_BRIDGE */ int pci_set_vga_state(struct pci_dev *dev, bool decode, @@ -3483,6 +3483,8 @@ static int __init pci_setup(char *str) pci_no_msi(); } else if (!strcmp(str, "noaer")) { pci_no_aer(); + } else if (!strncmp(str, "realloc", 7)) { + pci_realloc(); } else if (!strcmp(str, "nodomains")) { pci_no_domains(); } else if (!strncmp(str, "cbiosize=", 9)) { diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 731e20265ace..3a39bf1f1e2c 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -146,6 +146,8 @@ static inline void pci_no_msi(void) { } static inline void pci_msi_init_pci_dev(struct pci_dev *dev) { } #endif +extern void pci_realloc(void); + static inline int pci_no_d1d2(struct pci_dev *dev) { unsigned int parent_dstates = 0; diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 48849ffdd672..bafb3c3d4a89 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -168,7 +168,7 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, res->flags |= pci_calc_resource_flags(l) | IORESOURCE_SIZEALIGN; if (type == pci_bar_io) { l &= PCI_BASE_ADDRESS_IO_MASK; - mask = PCI_BASE_ADDRESS_IO_MASK & IO_SPACE_LIMIT; + mask = PCI_BASE_ADDRESS_IO_MASK & (u32) IO_SPACE_LIMIT; } else { l &= PCI_BASE_ADDRESS_MEM_MASK; mask = (u32)PCI_BASE_ADDRESS_MEM_MASK; diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index e8a140669f90..02145e9697a9 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2761,6 +2761,8 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev) } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832); +DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832); #endif /*CONFIG_MMC_RICOH_MMC*/ #if defined(CONFIG_DMAR) || defined(CONFIG_INTR_REMAP) diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 1e9e5a5b8c81..9995842e45b5 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -47,6 +47,13 @@ struct resource_list_x { (head)->next = NULL; \ } while (0) +int pci_realloc_enable = 0; +#define pci_realloc_enabled() pci_realloc_enable +void pci_realloc(void) +{ + pci_realloc_enable = 1; +} + /** * add_to_list() - add a new resource tracker to the list * @head: Head of the list @@ -1025,6 +1032,7 @@ static int __init pci_get_max_depth(void) return depth; } + /* * first try will not touch pci bridge res * second and later try will clear small leaf bridge res @@ -1068,6 +1076,13 @@ again: /* any device complain? */ if (!head.next) goto enable_and_dump; + + /* don't realloc if asked to do so */ + if (!pci_realloc_enabled()) { + free_list(resource_list_x, &head); + goto enable_and_dump; + } + failed_type = 0; for (list = head.next; list;) { failed_type |= list->flags; diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index 005417bd429e..e1c4938b301b 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -1156,9 +1156,9 @@ static acpi_status wmid3_set_device_status(u32 value, u16 device) struct wmid3_gds_input_param params = { .function_num = 0x1, .hotkey_number = 0x01, - .devices = ACER_WMID3_GDS_WIRELESS & - ACER_WMID3_GDS_THREEG & - ACER_WMID3_GDS_WIMAX & + .devices = ACER_WMID3_GDS_WIRELESS | + ACER_WMID3_GDS_THREEG | + ACER_WMID3_GDS_WIMAX | ACER_WMID3_GDS_BLUETOOTH, }; struct acpi_buffer input = { @@ -1445,6 +1445,8 @@ static void acer_wmi_notify(u32 value, void *context) union acpi_object *obj; struct event_return_value return_value; acpi_status status; + u16 device_state; + const struct key_entry *key; status = wmi_get_event_data(value, &response); if (status != AE_OK) { @@ -1472,23 +1474,32 @@ static void acer_wmi_notify(u32 value, void *context) switch (return_value.function) { case WMID_HOTKEY_EVENT: - if (return_value.device_state) { - u16 device_state = return_value.device_state; - pr_debug("device state: 0x%x\n", device_state); - if (has_cap(ACER_CAP_WIRELESS)) - rfkill_set_sw_state(wireless_rfkill, - !(device_state & ACER_WMID3_GDS_WIRELESS)); - if (has_cap(ACER_CAP_BLUETOOTH)) - rfkill_set_sw_state(bluetooth_rfkill, - !(device_state & ACER_WMID3_GDS_BLUETOOTH)); - if (has_cap(ACER_CAP_THREEG)) - rfkill_set_sw_state(threeg_rfkill, - !(device_state & ACER_WMID3_GDS_THREEG)); - } - if (!sparse_keymap_report_event(acer_wmi_input_dev, - return_value.key_num, 1, true)) + device_state = return_value.device_state; + pr_debug("device state: 0x%x\n", device_state); + + key = sparse_keymap_entry_from_scancode(acer_wmi_input_dev, + return_value.key_num); + if (!key) { pr_warn("Unknown key number - 0x%x\n", return_value.key_num); + } else { + switch (key->keycode) { + case KEY_WLAN: + case KEY_BLUETOOTH: + if (has_cap(ACER_CAP_WIRELESS)) + rfkill_set_sw_state(wireless_rfkill, + !(device_state & ACER_WMID3_GDS_WIRELESS)); + if (has_cap(ACER_CAP_THREEG)) + rfkill_set_sw_state(threeg_rfkill, + !(device_state & ACER_WMID3_GDS_THREEG)); + if (has_cap(ACER_CAP_BLUETOOTH)) + rfkill_set_sw_state(bluetooth_rfkill, + !(device_state & ACER_WMID3_GDS_BLUETOOTH)); + break; + } + sparse_keymap_report_entry(acer_wmi_input_dev, key, + 1, true); + } break; default: pr_warn("Unknown function number - %d - %d\n", diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index 00460cb9587b..3c7857c71a23 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -1025,6 +1025,7 @@ static int asus_wmi_backlight_init(struct asus_wmi *asus) return power; memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_PLATFORM; props.max_brightness = max; bd = backlight_device_register(asus->driver->name, &asus->platform_device->dev, asus, diff --git a/drivers/platform/x86/compal-laptop.c b/drivers/platform/x86/compal-laptop.c index 3f204fde1b02..8877b836d27c 100644 --- a/drivers/platform/x86/compal-laptop.c +++ b/drivers/platform/x86/compal-laptop.c @@ -1030,8 +1030,10 @@ static int __devinit compal_probe(struct platform_device *pdev) initialize_fan_control_data(data); err = sysfs_create_group(&pdev->dev.kobj, &compal_attribute_group); - if (err) + if (err) { + kfree(data); return err; + } data->hwmon_dev = hwmon_device_register(&pdev->dev); if (IS_ERR(data->hwmon_dev)) { diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index d3841de6a8cf..e39ab1d3ed87 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -292,12 +292,9 @@ static int dell_rfkill_set(void *data, bool blocked) dell_send_request(buffer, 17, 11); /* If the hardware switch controls this radio, and the hardware - switch is disabled, don't allow changing the software state. - If the hardware switch is reported as not supported, always - fire the SMI to toggle the killswitch. */ + switch is disabled, don't allow changing the software state */ if ((hwswitch_state & BIT(hwswitch_bit)) && - !(buffer->output[1] & BIT(16)) && - (buffer->output[1] & BIT(0))) { + !(buffer->output[1] & BIT(16))) { ret = -EINVAL; goto out; } @@ -403,23 +400,6 @@ static const struct file_operations dell_debugfs_fops = { static void dell_update_rfkill(struct work_struct *ignored) { - int status; - - get_buffer(); - dell_send_request(buffer, 17, 11); - status = buffer->output[1]; - release_buffer(); - - /* if hardware rfkill is not supported, set it explicitly */ - if (!(status & BIT(0))) { - if (wifi_rfkill) - dell_rfkill_set((void *)1, !((status & BIT(17)) >> 17)); - if (bluetooth_rfkill) - dell_rfkill_set((void *)2, !((status & BIT(18)) >> 18)); - if (wwan_rfkill) - dell_rfkill_set((void *)3, !((status & BIT(19)) >> 19)); - } - if (wifi_rfkill) dell_rfkill_query(wifi_rfkill, (void *)1); if (bluetooth_rfkill) @@ -560,11 +540,11 @@ static int dell_get_intensity(struct backlight_device *bd) else dell_send_request(buffer, 0, 1); + ret = buffer->output[1]; + out: release_buffer(); - if (ret) - return ret; - return buffer->output[1]; + return ret; } static const struct backlight_ops dell_ops = { diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index f94017bcdd6e..e2faa3cbb792 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -207,6 +207,7 @@ static int hp_wmi_perform_query(int query, int write, void *buffer, }; struct acpi_buffer input = { sizeof(struct bios_args), &args }; struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; + u32 rc; if (WARN_ON(insize > sizeof(args.data))) return -EINVAL; @@ -224,13 +225,13 @@ static int hp_wmi_perform_query(int query, int write, void *buffer, } bios_return = (struct bios_return *)obj->buffer.pointer; + rc = bios_return->return_code; - if (bios_return->return_code) { - if (bios_return->return_code != HPWMI_RET_UNKNOWN_CMDTYPE) - pr_warn("query 0x%x returned error 0x%x\n", - query, bios_return->return_code); + if (rc) { + if (rc != HPWMI_RET_UNKNOWN_CMDTYPE) + pr_warn("query 0x%x returned error 0x%x\n", query, rc); kfree(obj); - return bios_return->return_code; + return rc; } if (!outsize) { diff --git a/drivers/platform/x86/intel_oaktrail.c b/drivers/platform/x86/intel_oaktrail.c index e936364a609d..7f88c7923fc6 100644 --- a/drivers/platform/x86/intel_oaktrail.c +++ b/drivers/platform/x86/intel_oaktrail.c @@ -250,6 +250,7 @@ static int oaktrail_backlight_init(void) struct backlight_properties props; memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_PLATFORM; props.max_brightness = OT_EC_BL_BRIGHTNESS_MAX; bd = backlight_device_register(DRIVER_NAME, &oaktrail_device->dev, NULL, diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 77f6e707a2a9..26c5b117df22 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -184,6 +184,10 @@ enum tpacpi_hkey_event_t { /* Misc bay events */ TP_HKEY_EV_OPTDRV_EJ = 0x3006, /* opt. drive tray ejected */ + TP_HKEY_EV_HOTPLUG_DOCK = 0x4010, /* docked into hotplug dock + or port replicator */ + TP_HKEY_EV_HOTPLUG_UNDOCK = 0x4011, /* undocked from hotplug + dock or port replicator */ /* User-interface events */ TP_HKEY_EV_LID_CLOSE = 0x5001, /* laptop lid closed */ @@ -194,6 +198,10 @@ enum tpacpi_hkey_event_t { TP_HKEY_EV_PEN_REMOVED = 0x500c, /* tablet pen removed */ TP_HKEY_EV_BRGHT_CHANGED = 0x5010, /* backlight control event */ + /* Key-related user-interface events */ + TP_HKEY_EV_KEY_NUMLOCK = 0x6000, /* NumLock key pressed */ + TP_HKEY_EV_KEY_FN = 0x6005, /* Fn key pressed? E420 */ + /* Thermal events */ TP_HKEY_EV_ALARM_BAT_HOT = 0x6011, /* battery too hot */ TP_HKEY_EV_ALARM_BAT_XHOT = 0x6012, /* battery critically hot */ @@ -201,6 +209,10 @@ enum tpacpi_hkey_event_t { TP_HKEY_EV_ALARM_SENSOR_XHOT = 0x6022, /* sensor critically hot */ TP_HKEY_EV_THM_TABLE_CHANGED = 0x6030, /* thermal table changed */ + TP_HKEY_EV_UNK_6040 = 0x6040, /* Related to AC change? + some sort of APM hint, + W520 */ + /* Misc */ TP_HKEY_EV_RFKILL_CHANGED = 0x7000, /* rfkill switch changed */ }; @@ -3513,6 +3525,34 @@ static bool hotkey_notify_wakeup(const u32 hkey, return true; } +static bool hotkey_notify_dockevent(const u32 hkey, + bool *send_acpi_ev, + bool *ignore_acpi_ev) +{ + /* 0x4000-0x4FFF: dock-related events */ + *send_acpi_ev = true; + *ignore_acpi_ev = false; + + switch (hkey) { + case TP_HKEY_EV_UNDOCK_ACK: + /* ACPI undock operation completed after wakeup */ + hotkey_autosleep_ack = 1; + pr_info("undocked\n"); + hotkey_wakeup_hotunplug_complete_notify_change(); + return true; + + case TP_HKEY_EV_HOTPLUG_DOCK: /* docked to port replicator */ + pr_info("docked into hotplug port replicator\n"); + return true; + case TP_HKEY_EV_HOTPLUG_UNDOCK: /* undocked from port replicator */ + pr_info("undocked from hotplug port replicator\n"); + return true; + + default: + return false; + } +} + static bool hotkey_notify_usrevent(const u32 hkey, bool *send_acpi_ev, bool *ignore_acpi_ev) @@ -3547,13 +3587,13 @@ static bool hotkey_notify_usrevent(const u32 hkey, static void thermal_dump_all_sensors(void); -static bool hotkey_notify_thermal(const u32 hkey, +static bool hotkey_notify_6xxx(const u32 hkey, bool *send_acpi_ev, bool *ignore_acpi_ev) { bool known = true; - /* 0x6000-0x6FFF: thermal alarms */ + /* 0x6000-0x6FFF: thermal alarms/notices and keyboard events */ *send_acpi_ev = true; *ignore_acpi_ev = false; @@ -3582,8 +3622,17 @@ static bool hotkey_notify_thermal(const u32 hkey, "a sensor reports something is extremely hot!\n"); /* recommended action: immediate sleep/hibernate */ break; + + case TP_HKEY_EV_KEY_NUMLOCK: + case TP_HKEY_EV_KEY_FN: + /* key press events, we just ignore them as long as the EC + * is still reporting them in the normal keyboard stream */ + *send_acpi_ev = false; + *ignore_acpi_ev = true; + return true; + default: - pr_alert("THERMAL ALERT: unknown thermal alarm received\n"); + pr_warn("unknown possible thermal alarm or keyboard event received\n"); known = false; } @@ -3652,15 +3701,9 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) } break; case 4: - /* 0x4000-0x4FFF: dock-related wakeups */ - if (hkey == TP_HKEY_EV_UNDOCK_ACK) { - hotkey_autosleep_ack = 1; - pr_info("undocked\n"); - hotkey_wakeup_hotunplug_complete_notify_change(); - known_ev = true; - } else { - known_ev = false; - } + /* 0x4000-0x4FFF: dock-related events */ + known_ev = hotkey_notify_dockevent(hkey, &send_acpi_ev, + &ignore_acpi_ev); break; case 5: /* 0x5000-0x5FFF: human interface helpers */ @@ -3668,8 +3711,9 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) &ignore_acpi_ev); break; case 6: - /* 0x6000-0x6FFF: thermal alarms */ - known_ev = hotkey_notify_thermal(hkey, &send_acpi_ev, + /* 0x6000-0x6FFF: thermal alarms/notices and + * keyboard events */ + known_ev = hotkey_notify_6xxx(hkey, &send_acpi_ev, &ignore_acpi_ev); break; case 7: diff --git a/drivers/regulator/db8500-prcmu.c b/drivers/regulator/db8500-prcmu.c index e5f7b8fe51f4..2bb8f451cc06 100644 --- a/drivers/regulator/db8500-prcmu.c +++ b/drivers/regulator/db8500-prcmu.c @@ -266,7 +266,7 @@ static struct regulator_ops db8500_regulator_switch_ops = { * Regulator information */ static struct db8500_regulator_info - db8500_regulator_info[DB8500_NUM_REGULATORS] = { +db8500_regulator_info[DB8500_NUM_REGULATORS] = { [DB8500_REGULATOR_VAPE] = { .desc = { .name = "db8500-vape", @@ -492,11 +492,9 @@ static int __devinit db8500_regulator_probe(struct platform_device *pdev) info->desc.name, err); /* if failing, unregister all earlier regulators */ - i--; - while (i >= 0) { + while (--i >= 0) { info = &db8500_regulator_info[i]; regulator_unregister(info->rdev); - i--; } return err; } @@ -536,13 +534,7 @@ static struct platform_driver db8500_regulator_driver = { static int __init db8500_regulator_init(void) { - int ret; - - ret = platform_driver_register(&db8500_regulator_driver); - if (ret < 0) - return -ENODEV; - - return 0; + return platform_driver_register(&db8500_regulator_driver); } static void __exit db8500_regulator_exit(void) diff --git a/drivers/regulator/max8952.c b/drivers/regulator/max8952.c index daff7fd0e95c..486ed8141fcd 100644 --- a/drivers/regulator/max8952.c +++ b/drivers/regulator/max8952.c @@ -139,7 +139,7 @@ static int max8952_set_voltage(struct regulator_dev *rdev, s8 vid = -1, i; if (!gpio_is_valid(max8952->pdata->gpio_vid0) || - !gpio_is_valid(max8952->pdata->gpio_vid0)) { + !gpio_is_valid(max8952->pdata->gpio_vid1)) { /* DVS not supported */ return -EPERM; } diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c index 10d5a1d9768e..ad6628ca94f4 100644 --- a/drivers/regulator/max8997.c +++ b/drivers/regulator/max8997.c @@ -39,25 +39,28 @@ struct max8997_data { struct regulator_dev **rdev; int ramp_delay; /* in mV/us */ + bool buck1_gpiodvs; + bool buck2_gpiodvs; + bool buck5_gpiodvs; u8 buck1_vol[8]; u8 buck2_vol[8]; u8 buck5_vol[8]; + int buck125_gpios[3]; int buck125_gpioindex; + bool ignore_gpiodvs_side_effect; u8 saved_states[MAX8997_REG_MAX]; }; static inline void max8997_set_gpio(struct max8997_data *max8997) { - struct max8997_platform_data *pdata = - dev_get_platdata(max8997->iodev->dev); int set3 = (max8997->buck125_gpioindex) & 0x1; int set2 = ((max8997->buck125_gpioindex) >> 1) & 0x1; int set1 = ((max8997->buck125_gpioindex) >> 2) & 0x1; - gpio_set_value(pdata->buck125_gpios[0], set1); - gpio_set_value(pdata->buck125_gpios[1], set2); - gpio_set_value(pdata->buck125_gpios[2], set3); + gpio_set_value(max8997->buck125_gpios[0], set1); + gpio_set_value(max8997->buck125_gpios[1], set2); + gpio_set_value(max8997->buck125_gpios[2], set3); } struct voltage_map_desc { @@ -380,8 +383,6 @@ static int max8997_get_voltage_register(struct regulator_dev *rdev, static int max8997_get_voltage(struct regulator_dev *rdev) { struct max8997_data *max8997 = rdev_get_drvdata(rdev); - struct max8997_platform_data *pdata = - dev_get_platdata(max8997->iodev->dev); struct i2c_client *i2c = max8997->iodev->i2c; int reg, shift, mask, ret; int rid = max8997_get_rid(rdev); @@ -391,9 +392,9 @@ static int max8997_get_voltage(struct regulator_dev *rdev) if (ret) return ret; - if ((rid == MAX8997_BUCK1 && pdata->buck1_gpiodvs) || - (rid == MAX8997_BUCK2 && pdata->buck2_gpiodvs) || - (rid == MAX8997_BUCK5 && pdata->buck5_gpiodvs)) + if ((rid == MAX8997_BUCK1 && max8997->buck1_gpiodvs) || + (rid == MAX8997_BUCK2 && max8997->buck2_gpiodvs) || + (rid == MAX8997_BUCK5 && max8997->buck5_gpiodvs)) reg += max8997->buck125_gpioindex; ret = max8997_read_reg(i2c, reg, &val); @@ -543,7 +544,8 @@ static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev, rid == MAX8997_BUCK4 || rid == MAX8997_BUCK5) { /* If the voltage is increasing */ if (org < i) - udelay(desc->step * (i - org) / max8997->ramp_delay); + udelay(DIV_ROUND_UP(desc->step * (i - org), + max8997->ramp_delay)); } return ret; @@ -561,8 +563,6 @@ static int max8997_assess_side_effect(struct regulator_dev *rdev, u8 new_val, int *best) { struct max8997_data *max8997 = rdev_get_drvdata(rdev); - struct max8997_platform_data *pdata = - dev_get_platdata(max8997->iodev->dev); int rid = max8997_get_rid(rdev); u8 *buckx_val[3]; bool buckx_gpiodvs[3]; @@ -589,9 +589,9 @@ static int max8997_assess_side_effect(struct regulator_dev *rdev, buckx_val[0] = max8997->buck1_vol; buckx_val[1] = max8997->buck2_vol; buckx_val[2] = max8997->buck5_vol; - buckx_gpiodvs[0] = pdata->buck1_gpiodvs; - buckx_gpiodvs[1] = pdata->buck2_gpiodvs; - buckx_gpiodvs[2] = pdata->buck5_gpiodvs; + buckx_gpiodvs[0] = max8997->buck1_gpiodvs; + buckx_gpiodvs[1] = max8997->buck2_gpiodvs; + buckx_gpiodvs[2] = max8997->buck5_gpiodvs; for (i = 0; i < 8; i++) { int others; @@ -640,8 +640,6 @@ static int max8997_set_voltage_buck(struct regulator_dev *rdev, int min_uV, int max_uV, unsigned *selector) { struct max8997_data *max8997 = rdev_get_drvdata(rdev); - struct max8997_platform_data *pdata = - dev_get_platdata(max8997->iodev->dev); int rid = max8997_get_rid(rdev); const struct voltage_map_desc *desc; int new_val, new_idx, damage, tmp_val, tmp_idx, tmp_dmg; @@ -653,15 +651,15 @@ static int max8997_set_voltage_buck(struct regulator_dev *rdev, switch (rid) { case MAX8997_BUCK1: - if (pdata->buck1_gpiodvs) + if (max8997->buck1_gpiodvs) gpio_dvs_mode = true; break; case MAX8997_BUCK2: - if (pdata->buck2_gpiodvs) + if (max8997->buck2_gpiodvs) gpio_dvs_mode = true; break; case MAX8997_BUCK5: - if (pdata->buck5_gpiodvs) + if (max8997->buck5_gpiodvs) gpio_dvs_mode = true; break; } @@ -695,7 +693,7 @@ static int max8997_set_voltage_buck(struct regulator_dev *rdev, new_idx = tmp_idx; new_val = tmp_val; - if (pdata->ignore_gpiodvs_side_effect == false) + if (max8997->ignore_gpiodvs_side_effect == false) return -EINVAL; dev_warn(&rdev->dev, "MAX8997 GPIO-DVS Side Effect Warning: GPIO SET:" @@ -993,6 +991,11 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev) i2c = max8997->iodev->i2c; max8997->buck125_gpioindex = pdata->buck125_default_idx; + max8997->buck1_gpiodvs = pdata->buck1_gpiodvs; + max8997->buck2_gpiodvs = pdata->buck2_gpiodvs; + max8997->buck5_gpiodvs = pdata->buck5_gpiodvs; + memcpy(max8997->buck125_gpios, pdata->buck125_gpios, sizeof(int) * 3); + max8997->ignore_gpiodvs_side_effect = pdata->ignore_gpiodvs_side_effect; for (i = 0; i < 8; i++) { max8997->buck1_vol[i] = ret = @@ -1124,6 +1127,10 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev) 0x3f); } + /* Misc Settings */ + max8997->ramp_delay = 10; /* set 10mV/us, which is the default */ + max8997_write_reg(i2c, MAX8997_REG_BUCKRAMP, (0xf << 4) | 0x9); + for (i = 0; i < pdata->num_regulators; i++) { const struct voltage_map_desc *desc; int id = pdata->regulators[i].id; @@ -1148,10 +1155,6 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev) } } - /* Misc Settings */ - max8997->ramp_delay = 10; /* set 10mV/us, which is the default */ - max8997_write_reg(i2c, MAX8997_REG_BUCKRAMP, (0xf << 4) | 0x9); - return 0; err: for (i = 0; i < max8997->num_regulators; i++) diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c index 4724ba3acf1a..b2005b44e4f7 100644 --- a/drivers/rtc/rtc-ds1307.c +++ b/drivers/rtc/rtc-ds1307.c @@ -149,6 +149,7 @@ static const struct i2c_device_id ds1307_id[] = { { "ds1340", ds_1340 }, { "ds3231", ds_3231 }, { "m41t00", m41t00 }, + { "pt7c4338", ds_1307 }, { "rx8025", rx_8025 }, { } }; diff --git a/drivers/rtc/rtc-vt8500.c b/drivers/rtc/rtc-vt8500.c index b8bc862903ae..efd6066b5cd2 100644 --- a/drivers/rtc/rtc-vt8500.c +++ b/drivers/rtc/rtc-vt8500.c @@ -78,7 +78,6 @@ struct vt8500_rtc { void __iomem *regbase; struct resource *res; int irq_alarm; - int irq_hz; struct rtc_device *rtc; spinlock_t lock; /* Protects this structure */ }; @@ -100,10 +99,6 @@ static irqreturn_t vt8500_rtc_irq(int irq, void *dev_id) if (isr & 1) events |= RTC_AF | RTC_IRQF; - /* Only second/minute interrupts are supported */ - if (isr & 2) - events |= RTC_UF | RTC_IRQF; - rtc_update_irq(vt8500_rtc->rtc, 1, events); return IRQ_HANDLED; @@ -199,27 +194,12 @@ static int vt8500_alarm_irq_enable(struct device *dev, unsigned int enabled) return 0; } -static int vt8500_update_irq_enable(struct device *dev, unsigned int enabled) -{ - struct vt8500_rtc *vt8500_rtc = dev_get_drvdata(dev); - unsigned long tmp = readl(vt8500_rtc->regbase + VT8500_RTC_CR); - - if (enabled) - tmp |= VT8500_RTC_CR_SM_SEC | VT8500_RTC_CR_SM_ENABLE; - else - tmp &= ~VT8500_RTC_CR_SM_ENABLE; - - writel(tmp, vt8500_rtc->regbase + VT8500_RTC_CR); - return 0; -} - static const struct rtc_class_ops vt8500_rtc_ops = { .read_time = vt8500_rtc_read_time, .set_time = vt8500_rtc_set_time, .read_alarm = vt8500_rtc_read_alarm, .set_alarm = vt8500_rtc_set_alarm, .alarm_irq_enable = vt8500_alarm_irq_enable, - .update_irq_enable = vt8500_update_irq_enable, }; static int __devinit vt8500_rtc_probe(struct platform_device *pdev) @@ -248,13 +228,6 @@ static int __devinit vt8500_rtc_probe(struct platform_device *pdev) goto err_free; } - vt8500_rtc->irq_hz = platform_get_irq(pdev, 1); - if (vt8500_rtc->irq_hz < 0) { - dev_err(&pdev->dev, "No 1Hz IRQ resource defined\n"); - ret = -ENXIO; - goto err_free; - } - vt8500_rtc->res = request_mem_region(vt8500_rtc->res->start, resource_size(vt8500_rtc->res), "vt8500-rtc"); @@ -272,9 +245,8 @@ static int __devinit vt8500_rtc_probe(struct platform_device *pdev) goto err_release; } - /* Enable the second/minute interrupt generation and enable RTC */ - writel(VT8500_RTC_CR_ENABLE | VT8500_RTC_CR_24H - | VT8500_RTC_CR_SM_ENABLE | VT8500_RTC_CR_SM_SEC, + /* Enable RTC and set it to 24-hour mode */ + writel(VT8500_RTC_CR_ENABLE | VT8500_RTC_CR_24H, vt8500_rtc->regbase + VT8500_RTC_CR); vt8500_rtc->rtc = rtc_device_register("vt8500-rtc", &pdev->dev, @@ -286,26 +258,16 @@ static int __devinit vt8500_rtc_probe(struct platform_device *pdev) goto err_unmap; } - ret = request_irq(vt8500_rtc->irq_hz, vt8500_rtc_irq, 0, - "rtc 1Hz", vt8500_rtc); - if (ret < 0) { - dev_err(&pdev->dev, "can't get irq %i, err %d\n", - vt8500_rtc->irq_hz, ret); - goto err_unreg; - } - ret = request_irq(vt8500_rtc->irq_alarm, vt8500_rtc_irq, 0, "rtc alarm", vt8500_rtc); if (ret < 0) { dev_err(&pdev->dev, "can't get irq %i, err %d\n", vt8500_rtc->irq_alarm, ret); - goto err_free_hz; + goto err_unreg; } return 0; -err_free_hz: - free_irq(vt8500_rtc->irq_hz, vt8500_rtc); err_unreg: rtc_device_unregister(vt8500_rtc->rtc); err_unmap: @@ -323,7 +285,6 @@ static int __devexit vt8500_rtc_remove(struct platform_device *pdev) struct vt8500_rtc *vt8500_rtc = platform_get_drvdata(pdev); free_irq(vt8500_rtc->irq_alarm, vt8500_rtc); - free_irq(vt8500_rtc->irq_hz, vt8500_rtc); rtc_device_unregister(vt8500_rtc->rtc); diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 4a1f029c4fe9..8d9dae89f065 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -830,6 +830,19 @@ config SCSI_GDTH To compile this driver as a module, choose M here: the module will be called gdth. +config SCSI_ISCI + tristate "Intel(R) C600 Series Chipset SAS Controller" + depends on PCI && SCSI + depends on X86 + # (temporary): known alpha quality driver + depends on EXPERIMENTAL + select SCSI_SAS_LIBSAS + ---help--- + This driver supports the 6Gb/s SAS capabilities of the storage + control unit found in the Intel(R) C600 series chipset. + + The experimental tag will be removed after the driver exits alpha + config SCSI_GENERIC_NCR5380 tristate "Generic NCR5380/53c400 SCSI PIO support" depends on ISA && SCSI diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 7ad0b8a79ae8..3c08f5352b2d 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -73,6 +73,7 @@ obj-$(CONFIG_SCSI_AACRAID) += aacraid/ obj-$(CONFIG_SCSI_AIC7XXX_OLD) += aic7xxx_old.o obj-$(CONFIG_SCSI_AIC94XX) += aic94xx/ obj-$(CONFIG_SCSI_PM8001) += pm8001/ +obj-$(CONFIG_SCSI_ISCI) += isci/ obj-$(CONFIG_SCSI_IPS) += ips.o obj-$(CONFIG_SCSI_FD_MCS) += fd_mcs.o obj-$(CONFIG_SCSI_FUTURE_DOMAIN)+= fdomain.o diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index c6c0434d8034..6bba23a26303 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -1037,6 +1037,7 @@ static void complete_scsi_command(struct CommandList *cp) unsigned char sense_key; unsigned char asc; /* additional sense code */ unsigned char ascq; /* additional sense code qualifier */ + unsigned long sense_data_size; ei = cp->err_info; cmd = (struct scsi_cmnd *) cp->scsi_cmd; @@ -1051,10 +1052,14 @@ static void complete_scsi_command(struct CommandList *cp) cmd->result |= ei->ScsiStatus; /* copy the sense data whether we need to or not. */ - memcpy(cmd->sense_buffer, ei->SenseInfo, - ei->SenseLen > SCSI_SENSE_BUFFERSIZE ? - SCSI_SENSE_BUFFERSIZE : - ei->SenseLen); + if (SCSI_SENSE_BUFFERSIZE < sizeof(ei->SenseInfo)) + sense_data_size = SCSI_SENSE_BUFFERSIZE; + else + sense_data_size = sizeof(ei->SenseInfo); + if (ei->SenseLen < sense_data_size) + sense_data_size = ei->SenseLen; + + memcpy(cmd->sense_buffer, ei->SenseInfo, sense_data_size); scsi_set_resid(cmd, ei->ResidualCnt); if (ei->CommandStatus == 0) { @@ -2580,7 +2585,8 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp) c->SG[0].Ext = 0; /* we are not chaining*/ } hpsa_scsi_do_simple_cmd_core(h, c); - hpsa_pci_unmap(h->pdev, c, 1, PCI_DMA_BIDIRECTIONAL); + if (iocommand.buf_size > 0) + hpsa_pci_unmap(h->pdev, c, 1, PCI_DMA_BIDIRECTIONAL); check_ioctl_unit_attention(h, c); /* Copy the error information out */ diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c index b7650613b8c2..bdfa223a7dbb 100644 --- a/drivers/scsi/ibmvscsi/ibmvfc.c +++ b/drivers/scsi/ibmvscsi/ibmvfc.c @@ -4306,8 +4306,8 @@ static void ibmvfc_do_work(struct ibmvfc_host *vhost) spin_lock_irqsave(vhost->host->host_lock, flags); if (rc == H_CLOSED) vio_enable_interrupts(to_vio_dev(vhost->dev)); - else if (rc || (rc = ibmvfc_send_crq_init(vhost)) || - (rc = vio_enable_interrupts(to_vio_dev(vhost->dev)))) { + if (rc || (rc = ibmvfc_send_crq_init(vhost)) || + (rc = vio_enable_interrupts(to_vio_dev(vhost->dev)))) { ibmvfc_link_down(vhost, IBMVFC_LINK_DEAD); dev_err(vhost->dev, "Error after reset (rc=%d)\n", rc); } diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile new file mode 100644 index 000000000000..3359e10e0d8f --- /dev/null +++ b/drivers/scsi/isci/Makefile @@ -0,0 +1,8 @@ +obj-$(CONFIG_SCSI_ISCI) += isci.o +isci-objs := init.o phy.o request.o \ + remote_device.o port.o \ + host.o task.o probe_roms.o \ + remote_node_context.o \ + remote_node_table.o \ + unsolicited_frame_control.o \ + port_config.o \ diff --git a/drivers/scsi/isci/firmware/Makefile b/drivers/scsi/isci/firmware/Makefile new file mode 100644 index 000000000000..5f54461cabc5 --- /dev/null +++ b/drivers/scsi/isci/firmware/Makefile @@ -0,0 +1,19 @@ +# Makefile for create_fw +# +CC=gcc +CFLAGS=-c -Wall -O2 -g +LDFLAGS= +SOURCES=create_fw.c +OBJECTS=$(SOURCES:.cpp=.o) +EXECUTABLE=create_fw + +all: $(SOURCES) $(EXECUTABLE) + +$(EXECUTABLE): $(OBJECTS) + $(CC) $(LDFLAGS) $(OBJECTS) -o $@ + +.c.o: + $(CC) $(CFLAGS) $< -O $@ + +clean: + rm -f *.o $(EXECUTABLE) diff --git a/drivers/scsi/isci/firmware/README b/drivers/scsi/isci/firmware/README new file mode 100644 index 000000000000..8056d2bd233b --- /dev/null +++ b/drivers/scsi/isci/firmware/README @@ -0,0 +1,36 @@ +This defines the temporary binary blow we are to pass to the SCU +driver to emulate the binary firmware that we will eventually be +able to access via NVRAM on the SCU controller. + +The current size of the binary blob is expected to be 149 bytes or larger + +Header Types: +0x1: Phy Masks +0x2: Phy Gens +0x3: SAS Addrs +0xff: End of Data + +ID string - u8[12]: "#SCU MAGIC#\0" +Version - u8: 1 +SubVersion - u8: 0 + +Header Type - u8: 0x1 +Size - u8: 8 +Phy Mask - u32[8] + +Header Type - u8: 0x2 +Size - u8: 8 +Phy Gen - u32[8] + +Header Type - u8: 0x3 +Size - u8: 8 +Sas Addr - u64[8] + +Header Type - u8: 0xf + + +============================================================================== + +Place isci_firmware.bin in /lib/firmware +Be sure to recreate the initramfs image to include the firmware. + diff --git a/drivers/scsi/isci/firmware/create_fw.c b/drivers/scsi/isci/firmware/create_fw.c new file mode 100644 index 000000000000..c7a2887a7e95 --- /dev/null +++ b/drivers/scsi/isci/firmware/create_fw.c @@ -0,0 +1,99 @@ +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <string.h> +#include <errno.h> +#include <asm/types.h> +#include <strings.h> +#include <stdint.h> + +#include "create_fw.h" +#include "../probe_roms.h" + +int write_blob(struct isci_orom *isci_orom) +{ + FILE *fd; + int err; + size_t count; + + fd = fopen(blob_name, "w+"); + if (!fd) { + perror("Open file for write failed"); + fclose(fd); + return -EIO; + } + + count = fwrite(isci_orom, sizeof(struct isci_orom), 1, fd); + if (count != 1) { + perror("Write data failed"); + fclose(fd); + return -EIO; + } + + fclose(fd); + + return 0; +} + +void set_binary_values(struct isci_orom *isci_orom) +{ + int ctrl_idx, phy_idx, port_idx; + + /* setting OROM signature */ + strncpy(isci_orom->hdr.signature, sig, strlen(sig)); + isci_orom->hdr.version = version; + isci_orom->hdr.total_block_length = sizeof(struct isci_orom); + isci_orom->hdr.hdr_length = sizeof(struct sci_bios_oem_param_block_hdr); + isci_orom->hdr.num_elements = num_elements; + + for (ctrl_idx = 0; ctrl_idx < 2; ctrl_idx++) { + isci_orom->ctrl[ctrl_idx].controller.mode_type = mode_type; + isci_orom->ctrl[ctrl_idx].controller.max_concurrent_dev_spin_up = + max_num_concurrent_dev_spin_up; + isci_orom->ctrl[ctrl_idx].controller.do_enable_ssc = + enable_ssc; + + for (port_idx = 0; port_idx < 4; port_idx++) + isci_orom->ctrl[ctrl_idx].ports[port_idx].phy_mask = + phy_mask[ctrl_idx][port_idx]; + + for (phy_idx = 0; phy_idx < 4; phy_idx++) { + isci_orom->ctrl[ctrl_idx].phys[phy_idx].sas_address.high = + (__u32)(sas_addr[ctrl_idx][phy_idx] >> 32); + isci_orom->ctrl[ctrl_idx].phys[phy_idx].sas_address.low = + (__u32)(sas_addr[ctrl_idx][phy_idx]); + + isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control0 = + afe_tx_amp_control0; + isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control1 = + afe_tx_amp_control1; + isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control2 = + afe_tx_amp_control2; + isci_orom->ctrl[ctrl_idx].phys[phy_idx].afe_tx_amp_control3 = + afe_tx_amp_control3; + } + } +} + +int main(void) +{ + int err; + struct isci_orom *isci_orom; + + isci_orom = malloc(sizeof(struct isci_orom)); + memset(isci_orom, 0, sizeof(struct isci_orom)); + + set_binary_values(isci_orom); + + err = write_blob(isci_orom); + if (err < 0) { + free(isci_orom); + return err; + } + + free(isci_orom); + return 0; +} diff --git a/drivers/scsi/isci/firmware/create_fw.h b/drivers/scsi/isci/firmware/create_fw.h new file mode 100644 index 000000000000..5f298828d22e --- /dev/null +++ b/drivers/scsi/isci/firmware/create_fw.h @@ -0,0 +1,77 @@ +#ifndef _CREATE_FW_H_ +#define _CREATE_FW_H_ +#include "../probe_roms.h" + + +/* we are configuring for 2 SCUs */ +static const int num_elements = 2; + +/* + * For all defined arrays: + * elements 0-3 are for SCU0, ports 0-3 + * elements 4-7 are for SCU1, ports 0-3 + * + * valid configurations for one SCU are: + * P0 P1 P2 P3 + * ---------------- + * 0xF,0x0,0x0,0x0 # 1 x4 port + * 0x3,0x0,0x4,0x8 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are each x1 + * # ports + * 0x1,0x2,0xC,0x0 # Phys 0 and 1 are each x1 ports, phy 2 and phy 3 are a x2 + * # port + * 0x3,0x0,0xC,0x0 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are a x2 port + * 0x1,0x2,0x4,0x8 # Each phy is a x1 port (this is the default configuration) + * + * if there is a port/phy on which you do not wish to override the default + * values, use the value assigned to UNINIT_PARAM (255). + */ + +/* discovery mode type (port auto config mode by default ) */ + +/* + * if there is a port/phy on which you do not wish to override the default + * values, use the value "0000000000000000". SAS address of zero's is + * considered invalid and will not be used. + */ +#ifdef MPC +static const int mode_type = SCIC_PORT_MANUAL_CONFIGURATION_MODE; +static const __u8 phy_mask[2][4] = { {1, 2, 4, 8}, + {1, 2, 4, 8} }; +static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFFF0000001ULL, + 0x5FCFFFFFF0000002ULL, + 0x5FCFFFFFF0000003ULL, + 0x5FCFFFFFF0000004ULL }, + { 0x5FCFFFFFF0000005ULL, + 0x5FCFFFFFF0000006ULL, + 0x5FCFFFFFF0000007ULL, + 0x5FCFFFFFF0000008ULL } }; +#else /* APC (default) */ +static const int mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE; +static const __u8 phy_mask[2][4]; +static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFF00000001ULL, + 0x5FCFFFFF00000001ULL, + 0x5FCFFFFF00000001ULL, + 0x5FCFFFFF00000001ULL }, + { 0x5FCFFFFF00000002ULL, + 0x5FCFFFFF00000002ULL, + 0x5FCFFFFF00000002ULL, + 0x5FCFFFFF00000002ULL } }; +#endif + +/* Maximum number of concurrent device spin up */ +static const int max_num_concurrent_dev_spin_up = 1; + +/* enable of ssc operation */ +static const int enable_ssc; + +/* AFE_TX_AMP_CONTROL */ +static const unsigned int afe_tx_amp_control0 = 0x000bdd08; +static const unsigned int afe_tx_amp_control1 = 0x000ffc00; +static const unsigned int afe_tx_amp_control2 = 0x000b7c09; +static const unsigned int afe_tx_amp_control3 = 0x000afc6e; + +static const char blob_name[] = "isci_firmware.bin"; +static const char sig[] = "ISCUOEMB"; +static const unsigned char version = 0x10; + +#endif diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c new file mode 100644 index 000000000000..26072f1e9852 --- /dev/null +++ b/drivers/scsi/isci/host.c @@ -0,0 +1,2751 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include <linux/circ_buf.h> +#include <linux/device.h> +#include <scsi/sas.h> +#include "host.h" +#include "isci.h" +#include "port.h" +#include "host.h" +#include "probe_roms.h" +#include "remote_device.h" +#include "request.h" +#include "scu_completion_codes.h" +#include "scu_event_codes.h" +#include "registers.h" +#include "scu_remote_node_context.h" +#include "scu_task_context.h" + +#define SCU_CONTEXT_RAM_INIT_STALL_TIME 200 + +#define smu_max_ports(dcc_value) \ + (\ + (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT) + 1 \ + ) + +#define smu_max_task_contexts(dcc_value) \ + (\ + (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_SHIFT) + 1 \ + ) + +#define smu_max_rncs(dcc_value) \ + (\ + (((dcc_value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_SHIFT) + 1 \ + ) + +#define SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT 100 + +/** + * + * + * The number of milliseconds to wait while a given phy is consuming power + * before allowing another set of phys to consume power. Ultimately, this will + * be specified by OEM parameter. + */ +#define SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL 500 + +/** + * NORMALIZE_PUT_POINTER() - + * + * This macro will normalize the completion queue put pointer so its value can + * be used as an array inde + */ +#define NORMALIZE_PUT_POINTER(x) \ + ((x) & SMU_COMPLETION_QUEUE_PUT_POINTER_MASK) + + +/** + * NORMALIZE_EVENT_POINTER() - + * + * This macro will normalize the completion queue event entry so its value can + * be used as an index. + */ +#define NORMALIZE_EVENT_POINTER(x) \ + (\ + ((x) & SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_MASK) \ + >> SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_SHIFT \ + ) + +/** + * NORMALIZE_GET_POINTER() - + * + * This macro will normalize the completion queue get pointer so its value can + * be used as an index into an array + */ +#define NORMALIZE_GET_POINTER(x) \ + ((x) & SMU_COMPLETION_QUEUE_GET_POINTER_MASK) + +/** + * NORMALIZE_GET_POINTER_CYCLE_BIT() - + * + * This macro will normalize the completion queue cycle pointer so it matches + * the completion queue cycle bit + */ +#define NORMALIZE_GET_POINTER_CYCLE_BIT(x) \ + ((SMU_CQGR_CYCLE_BIT & (x)) << (31 - SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_SHIFT)) + +/** + * COMPLETION_QUEUE_CYCLE_BIT() - + * + * This macro will return the cycle bit of the completion queue entry + */ +#define COMPLETION_QUEUE_CYCLE_BIT(x) ((x) & 0x80000000) + +/* Init the state machine and call the state entry function (if any) */ +void sci_init_sm(struct sci_base_state_machine *sm, + const struct sci_base_state *state_table, u32 initial_state) +{ + sci_state_transition_t handler; + + sm->initial_state_id = initial_state; + sm->previous_state_id = initial_state; + sm->current_state_id = initial_state; + sm->state_table = state_table; + + handler = sm->state_table[initial_state].enter_state; + if (handler) + handler(sm); +} + +/* Call the state exit fn, update the current state, call the state entry fn */ +void sci_change_state(struct sci_base_state_machine *sm, u32 next_state) +{ + sci_state_transition_t handler; + + handler = sm->state_table[sm->current_state_id].exit_state; + if (handler) + handler(sm); + + sm->previous_state_id = sm->current_state_id; + sm->current_state_id = next_state; + + handler = sm->state_table[sm->current_state_id].enter_state; + if (handler) + handler(sm); +} + +static bool sci_controller_completion_queue_has_entries(struct isci_host *ihost) +{ + u32 get_value = ihost->completion_queue_get; + u32 get_index = get_value & SMU_COMPLETION_QUEUE_GET_POINTER_MASK; + + if (NORMALIZE_GET_POINTER_CYCLE_BIT(get_value) == + COMPLETION_QUEUE_CYCLE_BIT(ihost->completion_queue[get_index])) + return true; + + return false; +} + +static bool sci_controller_isr(struct isci_host *ihost) +{ + if (sci_controller_completion_queue_has_entries(ihost)) { + return true; + } else { + /* + * we have a spurious interrupt it could be that we have already + * emptied the completion queue from a previous interrupt */ + writel(SMU_ISR_COMPLETION, &ihost->smu_registers->interrupt_status); + + /* + * There is a race in the hardware that could cause us not to be notified + * of an interrupt completion if we do not take this step. We will mask + * then unmask the interrupts so if there is another interrupt pending + * the clearing of the interrupt source we get the next interrupt message. */ + writel(0xFF000000, &ihost->smu_registers->interrupt_mask); + writel(0, &ihost->smu_registers->interrupt_mask); + } + + return false; +} + +irqreturn_t isci_msix_isr(int vec, void *data) +{ + struct isci_host *ihost = data; + + if (sci_controller_isr(ihost)) + tasklet_schedule(&ihost->completion_tasklet); + + return IRQ_HANDLED; +} + +static bool sci_controller_error_isr(struct isci_host *ihost) +{ + u32 interrupt_status; + + interrupt_status = + readl(&ihost->smu_registers->interrupt_status); + interrupt_status &= (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND); + + if (interrupt_status != 0) { + /* + * There is an error interrupt pending so let it through and handle + * in the callback */ + return true; + } + + /* + * There is a race in the hardware that could cause us not to be notified + * of an interrupt completion if we do not take this step. We will mask + * then unmask the error interrupts so if there was another interrupt + * pending we will be notified. + * Could we write the value of (SMU_ISR_QUEUE_ERROR | SMU_ISR_QUEUE_SUSPEND)? */ + writel(0xff, &ihost->smu_registers->interrupt_mask); + writel(0, &ihost->smu_registers->interrupt_mask); + + return false; +} + +static void sci_controller_task_completion(struct isci_host *ihost, u32 ent) +{ + u32 index = SCU_GET_COMPLETION_INDEX(ent); + struct isci_request *ireq = ihost->reqs[index]; + + /* Make sure that we really want to process this IO request */ + if (test_bit(IREQ_ACTIVE, &ireq->flags) && + ireq->io_tag != SCI_CONTROLLER_INVALID_IO_TAG && + ISCI_TAG_SEQ(ireq->io_tag) == ihost->io_request_sequence[index]) + /* Yep this is a valid io request pass it along to the + * io request handler + */ + sci_io_request_tc_completion(ireq, ent); +} + +static void sci_controller_sdma_completion(struct isci_host *ihost, u32 ent) +{ + u32 index; + struct isci_request *ireq; + struct isci_remote_device *idev; + + index = SCU_GET_COMPLETION_INDEX(ent); + + switch (scu_get_command_request_type(ent)) { + case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC: + case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC: + ireq = ihost->reqs[index]; + dev_warn(&ihost->pdev->dev, "%s: %x for io request %p\n", + __func__, ent, ireq); + /* @todo For a post TC operation we need to fail the IO + * request + */ + break; + case SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC: + case SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC: + case SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC: + idev = ihost->device_table[index]; + dev_warn(&ihost->pdev->dev, "%s: %x for device %p\n", + __func__, ent, idev); + /* @todo For a port RNC operation we need to fail the + * device + */ + break; + default: + dev_warn(&ihost->pdev->dev, "%s: unknown completion type %x\n", + __func__, ent); + break; + } +} + +static void sci_controller_unsolicited_frame(struct isci_host *ihost, u32 ent) +{ + u32 index; + u32 frame_index; + + struct scu_unsolicited_frame_header *frame_header; + struct isci_phy *iphy; + struct isci_remote_device *idev; + + enum sci_status result = SCI_FAILURE; + + frame_index = SCU_GET_FRAME_INDEX(ent); + + frame_header = ihost->uf_control.buffers.array[frame_index].header; + ihost->uf_control.buffers.array[frame_index].state = UNSOLICITED_FRAME_IN_USE; + + if (SCU_GET_FRAME_ERROR(ent)) { + /* + * / @todo If the IAF frame or SIGNATURE FIS frame has an error will + * / this cause a problem? We expect the phy initialization will + * / fail if there is an error in the frame. */ + sci_controller_release_frame(ihost, frame_index); + return; + } + + if (frame_header->is_address_frame) { + index = SCU_GET_PROTOCOL_ENGINE_INDEX(ent); + iphy = &ihost->phys[index]; + result = sci_phy_frame_handler(iphy, frame_index); + } else { + + index = SCU_GET_COMPLETION_INDEX(ent); + + if (index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { + /* + * This is a signature fis or a frame from a direct attached SATA + * device that has not yet been created. In either case forwared + * the frame to the PE and let it take care of the frame data. */ + index = SCU_GET_PROTOCOL_ENGINE_INDEX(ent); + iphy = &ihost->phys[index]; + result = sci_phy_frame_handler(iphy, frame_index); + } else { + if (index < ihost->remote_node_entries) + idev = ihost->device_table[index]; + else + idev = NULL; + + if (idev != NULL) + result = sci_remote_device_frame_handler(idev, frame_index); + else + sci_controller_release_frame(ihost, frame_index); + } + } + + if (result != SCI_SUCCESS) { + /* + * / @todo Is there any reason to report some additional error message + * / when we get this failure notifiction? */ + } +} + +static void sci_controller_event_completion(struct isci_host *ihost, u32 ent) +{ + struct isci_remote_device *idev; + struct isci_request *ireq; + struct isci_phy *iphy; + u32 index; + + index = SCU_GET_COMPLETION_INDEX(ent); + + switch (scu_get_event_type(ent)) { + case SCU_EVENT_TYPE_SMU_COMMAND_ERROR: + /* / @todo The driver did something wrong and we need to fix the condtion. */ + dev_err(&ihost->pdev->dev, + "%s: SCIC Controller 0x%p received SMU command error " + "0x%x\n", + __func__, + ihost, + ent); + break; + + case SCU_EVENT_TYPE_SMU_PCQ_ERROR: + case SCU_EVENT_TYPE_SMU_ERROR: + case SCU_EVENT_TYPE_FATAL_MEMORY_ERROR: + /* + * / @todo This is a hardware failure and its likely that we want to + * / reset the controller. */ + dev_err(&ihost->pdev->dev, + "%s: SCIC Controller 0x%p received fatal controller " + "event 0x%x\n", + __func__, + ihost, + ent); + break; + + case SCU_EVENT_TYPE_TRANSPORT_ERROR: + ireq = ihost->reqs[index]; + sci_io_request_event_handler(ireq, ent); + break; + + case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT: + switch (scu_get_event_specifier(ent)) { + case SCU_EVENT_SPECIFIC_SMP_RESPONSE_NO_PE: + case SCU_EVENT_SPECIFIC_TASK_TIMEOUT: + ireq = ihost->reqs[index]; + if (ireq != NULL) + sci_io_request_event_handler(ireq, ent); + else + dev_warn(&ihost->pdev->dev, + "%s: SCIC Controller 0x%p received " + "event 0x%x for io request object " + "that doesnt exist.\n", + __func__, + ihost, + ent); + + break; + + case SCU_EVENT_SPECIFIC_IT_NEXUS_TIMEOUT: + idev = ihost->device_table[index]; + if (idev != NULL) + sci_remote_device_event_handler(idev, ent); + else + dev_warn(&ihost->pdev->dev, + "%s: SCIC Controller 0x%p received " + "event 0x%x for remote device object " + "that doesnt exist.\n", + __func__, + ihost, + ent); + + break; + } + break; + + case SCU_EVENT_TYPE_BROADCAST_CHANGE: + /* + * direct the broadcast change event to the phy first and then let + * the phy redirect the broadcast change to the port object */ + case SCU_EVENT_TYPE_ERR_CNT_EVENT: + /* + * direct error counter event to the phy object since that is where + * we get the event notification. This is a type 4 event. */ + case SCU_EVENT_TYPE_OSSP_EVENT: + index = SCU_GET_PROTOCOL_ENGINE_INDEX(ent); + iphy = &ihost->phys[index]; + sci_phy_event_handler(iphy, ent); + break; + + case SCU_EVENT_TYPE_RNC_SUSPEND_TX: + case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: + case SCU_EVENT_TYPE_RNC_OPS_MISC: + if (index < ihost->remote_node_entries) { + idev = ihost->device_table[index]; + + if (idev != NULL) + sci_remote_device_event_handler(idev, ent); + } else + dev_err(&ihost->pdev->dev, + "%s: SCIC Controller 0x%p received event 0x%x " + "for remote device object 0x%0x that doesnt " + "exist.\n", + __func__, + ihost, + ent, + index); + + break; + + default: + dev_warn(&ihost->pdev->dev, + "%s: SCIC Controller received unknown event code %x\n", + __func__, + ent); + break; + } +} + +static void sci_controller_process_completions(struct isci_host *ihost) +{ + u32 completion_count = 0; + u32 ent; + u32 get_index; + u32 get_cycle; + u32 event_get; + u32 event_cycle; + + dev_dbg(&ihost->pdev->dev, + "%s: completion queue begining get:0x%08x\n", + __func__, + ihost->completion_queue_get); + + /* Get the component parts of the completion queue */ + get_index = NORMALIZE_GET_POINTER(ihost->completion_queue_get); + get_cycle = SMU_CQGR_CYCLE_BIT & ihost->completion_queue_get; + + event_get = NORMALIZE_EVENT_POINTER(ihost->completion_queue_get); + event_cycle = SMU_CQGR_EVENT_CYCLE_BIT & ihost->completion_queue_get; + + while ( + NORMALIZE_GET_POINTER_CYCLE_BIT(get_cycle) + == COMPLETION_QUEUE_CYCLE_BIT(ihost->completion_queue[get_index]) + ) { + completion_count++; + + ent = ihost->completion_queue[get_index]; + + /* increment the get pointer and check for rollover to toggle the cycle bit */ + get_cycle ^= ((get_index+1) & SCU_MAX_COMPLETION_QUEUE_ENTRIES) << + (SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_SHIFT - SCU_MAX_COMPLETION_QUEUE_SHIFT); + get_index = (get_index+1) & (SCU_MAX_COMPLETION_QUEUE_ENTRIES-1); + + dev_dbg(&ihost->pdev->dev, + "%s: completion queue entry:0x%08x\n", + __func__, + ent); + + switch (SCU_GET_COMPLETION_TYPE(ent)) { + case SCU_COMPLETION_TYPE_TASK: + sci_controller_task_completion(ihost, ent); + break; + + case SCU_COMPLETION_TYPE_SDMA: + sci_controller_sdma_completion(ihost, ent); + break; + + case SCU_COMPLETION_TYPE_UFI: + sci_controller_unsolicited_frame(ihost, ent); + break; + + case SCU_COMPLETION_TYPE_EVENT: + case SCU_COMPLETION_TYPE_NOTIFY: { + event_cycle ^= ((event_get+1) & SCU_MAX_EVENTS) << + (SMU_COMPLETION_QUEUE_GET_EVENT_CYCLE_BIT_SHIFT - SCU_MAX_EVENTS_SHIFT); + event_get = (event_get+1) & (SCU_MAX_EVENTS-1); + + sci_controller_event_completion(ihost, ent); + break; + } + default: + dev_warn(&ihost->pdev->dev, + "%s: SCIC Controller received unknown " + "completion type %x\n", + __func__, + ent); + break; + } + } + + /* Update the get register if we completed one or more entries */ + if (completion_count > 0) { + ihost->completion_queue_get = + SMU_CQGR_GEN_BIT(ENABLE) | + SMU_CQGR_GEN_BIT(EVENT_ENABLE) | + event_cycle | + SMU_CQGR_GEN_VAL(EVENT_POINTER, event_get) | + get_cycle | + SMU_CQGR_GEN_VAL(POINTER, get_index); + + writel(ihost->completion_queue_get, + &ihost->smu_registers->completion_queue_get); + + } + + dev_dbg(&ihost->pdev->dev, + "%s: completion queue ending get:0x%08x\n", + __func__, + ihost->completion_queue_get); + +} + +static void sci_controller_error_handler(struct isci_host *ihost) +{ + u32 interrupt_status; + + interrupt_status = + readl(&ihost->smu_registers->interrupt_status); + + if ((interrupt_status & SMU_ISR_QUEUE_SUSPEND) && + sci_controller_completion_queue_has_entries(ihost)) { + + sci_controller_process_completions(ihost); + writel(SMU_ISR_QUEUE_SUSPEND, &ihost->smu_registers->interrupt_status); + } else { + dev_err(&ihost->pdev->dev, "%s: status: %#x\n", __func__, + interrupt_status); + + sci_change_state(&ihost->sm, SCIC_FAILED); + + return; + } + + /* If we dont process any completions I am not sure that we want to do this. + * We are in the middle of a hardware fault and should probably be reset. + */ + writel(0, &ihost->smu_registers->interrupt_mask); +} + +irqreturn_t isci_intx_isr(int vec, void *data) +{ + irqreturn_t ret = IRQ_NONE; + struct isci_host *ihost = data; + + if (sci_controller_isr(ihost)) { + writel(SMU_ISR_COMPLETION, &ihost->smu_registers->interrupt_status); + tasklet_schedule(&ihost->completion_tasklet); + ret = IRQ_HANDLED; + } else if (sci_controller_error_isr(ihost)) { + spin_lock(&ihost->scic_lock); + sci_controller_error_handler(ihost); + spin_unlock(&ihost->scic_lock); + ret = IRQ_HANDLED; + } + + return ret; +} + +irqreturn_t isci_error_isr(int vec, void *data) +{ + struct isci_host *ihost = data; + + if (sci_controller_error_isr(ihost)) + sci_controller_error_handler(ihost); + + return IRQ_HANDLED; +} + +/** + * isci_host_start_complete() - This function is called by the core library, + * through the ISCI Module, to indicate controller start status. + * @isci_host: This parameter specifies the ISCI host object + * @completion_status: This parameter specifies the completion status from the + * core library. + * + */ +static void isci_host_start_complete(struct isci_host *ihost, enum sci_status completion_status) +{ + if (completion_status != SCI_SUCCESS) + dev_info(&ihost->pdev->dev, + "controller start timed out, continuing...\n"); + isci_host_change_state(ihost, isci_ready); + clear_bit(IHOST_START_PENDING, &ihost->flags); + wake_up(&ihost->eventq); +} + +int isci_host_scan_finished(struct Scsi_Host *shost, unsigned long time) +{ + struct isci_host *ihost = SHOST_TO_SAS_HA(shost)->lldd_ha; + + if (test_bit(IHOST_START_PENDING, &ihost->flags)) + return 0; + + /* todo: use sas_flush_discovery once it is upstream */ + scsi_flush_work(shost); + + scsi_flush_work(shost); + + dev_dbg(&ihost->pdev->dev, + "%s: ihost->status = %d, time = %ld\n", + __func__, isci_host_get_state(ihost), time); + + return 1; + +} + +/** + * sci_controller_get_suggested_start_timeout() - This method returns the + * suggested sci_controller_start() timeout amount. The user is free to + * use any timeout value, but this method provides the suggested minimum + * start timeout value. The returned value is based upon empirical + * information determined as a result of interoperability testing. + * @controller: the handle to the controller object for which to return the + * suggested start timeout. + * + * This method returns the number of milliseconds for the suggested start + * operation timeout. + */ +static u32 sci_controller_get_suggested_start_timeout(struct isci_host *ihost) +{ + /* Validate the user supplied parameters. */ + if (!ihost) + return 0; + + /* + * The suggested minimum timeout value for a controller start operation: + * + * Signature FIS Timeout + * + Phy Start Timeout + * + Number of Phy Spin Up Intervals + * --------------------------------- + * Number of milliseconds for the controller start operation. + * + * NOTE: The number of phy spin up intervals will be equivalent + * to the number of phys divided by the number phys allowed + * per interval - 1 (once OEM parameters are supported). + * Currently we assume only 1 phy per interval. */ + + return SCIC_SDS_SIGNATURE_FIS_TIMEOUT + + SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT + + ((SCI_MAX_PHYS - 1) * SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL); +} + +static void sci_controller_enable_interrupts(struct isci_host *ihost) +{ + BUG_ON(ihost->smu_registers == NULL); + writel(0, &ihost->smu_registers->interrupt_mask); +} + +void sci_controller_disable_interrupts(struct isci_host *ihost) +{ + BUG_ON(ihost->smu_registers == NULL); + writel(0xffffffff, &ihost->smu_registers->interrupt_mask); +} + +static void sci_controller_enable_port_task_scheduler(struct isci_host *ihost) +{ + u32 port_task_scheduler_value; + + port_task_scheduler_value = + readl(&ihost->scu_registers->peg0.ptsg.control); + port_task_scheduler_value |= + (SCU_PTSGCR_GEN_BIT(ETM_ENABLE) | + SCU_PTSGCR_GEN_BIT(PTSG_ENABLE)); + writel(port_task_scheduler_value, + &ihost->scu_registers->peg0.ptsg.control); +} + +static void sci_controller_assign_task_entries(struct isci_host *ihost) +{ + u32 task_assignment; + + /* + * Assign all the TCs to function 0 + * TODO: Do we actually need to read this register to write it back? + */ + + task_assignment = + readl(&ihost->smu_registers->task_context_assignment[0]); + + task_assignment |= (SMU_TCA_GEN_VAL(STARTING, 0)) | + (SMU_TCA_GEN_VAL(ENDING, ihost->task_context_entries - 1)) | + (SMU_TCA_GEN_BIT(RANGE_CHECK_ENABLE)); + + writel(task_assignment, + &ihost->smu_registers->task_context_assignment[0]); + +} + +static void sci_controller_initialize_completion_queue(struct isci_host *ihost) +{ + u32 index; + u32 completion_queue_control_value; + u32 completion_queue_get_value; + u32 completion_queue_put_value; + + ihost->completion_queue_get = 0; + + completion_queue_control_value = + (SMU_CQC_QUEUE_LIMIT_SET(SCU_MAX_COMPLETION_QUEUE_ENTRIES - 1) | + SMU_CQC_EVENT_LIMIT_SET(SCU_MAX_EVENTS - 1)); + + writel(completion_queue_control_value, + &ihost->smu_registers->completion_queue_control); + + + /* Set the completion queue get pointer and enable the queue */ + completion_queue_get_value = ( + (SMU_CQGR_GEN_VAL(POINTER, 0)) + | (SMU_CQGR_GEN_VAL(EVENT_POINTER, 0)) + | (SMU_CQGR_GEN_BIT(ENABLE)) + | (SMU_CQGR_GEN_BIT(EVENT_ENABLE)) + ); + + writel(completion_queue_get_value, + &ihost->smu_registers->completion_queue_get); + + /* Set the completion queue put pointer */ + completion_queue_put_value = ( + (SMU_CQPR_GEN_VAL(POINTER, 0)) + | (SMU_CQPR_GEN_VAL(EVENT_POINTER, 0)) + ); + + writel(completion_queue_put_value, + &ihost->smu_registers->completion_queue_put); + + /* Initialize the cycle bit of the completion queue entries */ + for (index = 0; index < SCU_MAX_COMPLETION_QUEUE_ENTRIES; index++) { + /* + * If get.cycle_bit != completion_queue.cycle_bit + * its not a valid completion queue entry + * so at system start all entries are invalid */ + ihost->completion_queue[index] = 0x80000000; + } +} + +static void sci_controller_initialize_unsolicited_frame_queue(struct isci_host *ihost) +{ + u32 frame_queue_control_value; + u32 frame_queue_get_value; + u32 frame_queue_put_value; + + /* Write the queue size */ + frame_queue_control_value = + SCU_UFQC_GEN_VAL(QUEUE_SIZE, SCU_MAX_UNSOLICITED_FRAMES); + + writel(frame_queue_control_value, + &ihost->scu_registers->sdma.unsolicited_frame_queue_control); + + /* Setup the get pointer for the unsolicited frame queue */ + frame_queue_get_value = ( + SCU_UFQGP_GEN_VAL(POINTER, 0) + | SCU_UFQGP_GEN_BIT(ENABLE_BIT) + ); + + writel(frame_queue_get_value, + &ihost->scu_registers->sdma.unsolicited_frame_get_pointer); + /* Setup the put pointer for the unsolicited frame queue */ + frame_queue_put_value = SCU_UFQPP_GEN_VAL(POINTER, 0); + writel(frame_queue_put_value, + &ihost->scu_registers->sdma.unsolicited_frame_put_pointer); +} + +static void sci_controller_transition_to_ready(struct isci_host *ihost, enum sci_status status) +{ + if (ihost->sm.current_state_id == SCIC_STARTING) { + /* + * We move into the ready state, because some of the phys/ports + * may be up and operational. + */ + sci_change_state(&ihost->sm, SCIC_READY); + + isci_host_start_complete(ihost, status); + } +} + +static bool is_phy_starting(struct isci_phy *iphy) +{ + enum sci_phy_states state; + + state = iphy->sm.current_state_id; + switch (state) { + case SCI_PHY_STARTING: + case SCI_PHY_SUB_INITIAL: + case SCI_PHY_SUB_AWAIT_SAS_SPEED_EN: + case SCI_PHY_SUB_AWAIT_IAF_UF: + case SCI_PHY_SUB_AWAIT_SAS_POWER: + case SCI_PHY_SUB_AWAIT_SATA_POWER: + case SCI_PHY_SUB_AWAIT_SATA_PHY_EN: + case SCI_PHY_SUB_AWAIT_SATA_SPEED_EN: + case SCI_PHY_SUB_AWAIT_SIG_FIS_UF: + case SCI_PHY_SUB_FINAL: + return true; + default: + return false; + } +} + +/** + * sci_controller_start_next_phy - start phy + * @scic: controller + * + * If all the phys have been started, then attempt to transition the + * controller to the READY state and inform the user + * (sci_cb_controller_start_complete()). + */ +static enum sci_status sci_controller_start_next_phy(struct isci_host *ihost) +{ + struct sci_oem_params *oem = &ihost->oem_parameters; + struct isci_phy *iphy; + enum sci_status status; + + status = SCI_SUCCESS; + + if (ihost->phy_startup_timer_pending) + return status; + + if (ihost->next_phy_to_start >= SCI_MAX_PHYS) { + bool is_controller_start_complete = true; + u32 state; + u8 index; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + iphy = &ihost->phys[index]; + state = iphy->sm.current_state_id; + + if (!phy_get_non_dummy_port(iphy)) + continue; + + /* The controller start operation is complete iff: + * - all links have been given an opportunity to start + * - have no indication of a connected device + * - have an indication of a connected device and it has + * finished the link training process. + */ + if ((iphy->is_in_link_training == false && state == SCI_PHY_INITIAL) || + (iphy->is_in_link_training == false && state == SCI_PHY_STOPPED) || + (iphy->is_in_link_training == true && is_phy_starting(iphy))) { + is_controller_start_complete = false; + break; + } + } + + /* + * The controller has successfully finished the start process. + * Inform the SCI Core user and transition to the READY state. */ + if (is_controller_start_complete == true) { + sci_controller_transition_to_ready(ihost, SCI_SUCCESS); + sci_del_timer(&ihost->phy_timer); + ihost->phy_startup_timer_pending = false; + } + } else { + iphy = &ihost->phys[ihost->next_phy_to_start]; + + if (oem->controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { + if (phy_get_non_dummy_port(iphy) == NULL) { + ihost->next_phy_to_start++; + + /* Caution recursion ahead be forwarned + * + * The PHY was never added to a PORT in MPC mode + * so start the next phy in sequence This phy + * will never go link up and will not draw power + * the OEM parameters either configured the phy + * incorrectly for the PORT or it was never + * assigned to a PORT + */ + return sci_controller_start_next_phy(ihost); + } + } + + status = sci_phy_start(iphy); + + if (status == SCI_SUCCESS) { + sci_mod_timer(&ihost->phy_timer, + SCIC_SDS_CONTROLLER_PHY_START_TIMEOUT); + ihost->phy_startup_timer_pending = true; + } else { + dev_warn(&ihost->pdev->dev, + "%s: Controller stop operation failed " + "to stop phy %d because of status " + "%d.\n", + __func__, + ihost->phys[ihost->next_phy_to_start].phy_index, + status); + } + + ihost->next_phy_to_start++; + } + + return status; +} + +static void phy_startup_timeout(unsigned long data) +{ + struct sci_timer *tmr = (struct sci_timer *)data; + struct isci_host *ihost = container_of(tmr, typeof(*ihost), phy_timer); + unsigned long flags; + enum sci_status status; + + spin_lock_irqsave(&ihost->scic_lock, flags); + + if (tmr->cancel) + goto done; + + ihost->phy_startup_timer_pending = false; + + do { + status = sci_controller_start_next_phy(ihost); + } while (status != SCI_SUCCESS); + +done: + spin_unlock_irqrestore(&ihost->scic_lock, flags); +} + +static u16 isci_tci_active(struct isci_host *ihost) +{ + return CIRC_CNT(ihost->tci_head, ihost->tci_tail, SCI_MAX_IO_REQUESTS); +} + +static enum sci_status sci_controller_start(struct isci_host *ihost, + u32 timeout) +{ + enum sci_status result; + u16 index; + + if (ihost->sm.current_state_id != SCIC_INITIALIZED) { + dev_warn(&ihost->pdev->dev, + "SCIC Controller start operation requested in " + "invalid state\n"); + return SCI_FAILURE_INVALID_STATE; + } + + /* Build the TCi free pool */ + BUILD_BUG_ON(SCI_MAX_IO_REQUESTS > 1 << sizeof(ihost->tci_pool[0]) * 8); + ihost->tci_head = 0; + ihost->tci_tail = 0; + for (index = 0; index < ihost->task_context_entries; index++) + isci_tci_free(ihost, index); + + /* Build the RNi free pool */ + sci_remote_node_table_initialize(&ihost->available_remote_nodes, + ihost->remote_node_entries); + + /* + * Before anything else lets make sure we will not be + * interrupted by the hardware. + */ + sci_controller_disable_interrupts(ihost); + + /* Enable the port task scheduler */ + sci_controller_enable_port_task_scheduler(ihost); + + /* Assign all the task entries to ihost physical function */ + sci_controller_assign_task_entries(ihost); + + /* Now initialize the completion queue */ + sci_controller_initialize_completion_queue(ihost); + + /* Initialize the unsolicited frame queue for use */ + sci_controller_initialize_unsolicited_frame_queue(ihost); + + /* Start all of the ports on this controller */ + for (index = 0; index < ihost->logical_port_entries; index++) { + struct isci_port *iport = &ihost->ports[index]; + + result = sci_port_start(iport); + if (result) + return result; + } + + sci_controller_start_next_phy(ihost); + + sci_mod_timer(&ihost->timer, timeout); + + sci_change_state(&ihost->sm, SCIC_STARTING); + + return SCI_SUCCESS; +} + +void isci_host_scan_start(struct Scsi_Host *shost) +{ + struct isci_host *ihost = SHOST_TO_SAS_HA(shost)->lldd_ha; + unsigned long tmo = sci_controller_get_suggested_start_timeout(ihost); + + set_bit(IHOST_START_PENDING, &ihost->flags); + + spin_lock_irq(&ihost->scic_lock); + sci_controller_start(ihost, tmo); + sci_controller_enable_interrupts(ihost); + spin_unlock_irq(&ihost->scic_lock); +} + +static void isci_host_stop_complete(struct isci_host *ihost, enum sci_status completion_status) +{ + isci_host_change_state(ihost, isci_stopped); + sci_controller_disable_interrupts(ihost); + clear_bit(IHOST_STOP_PENDING, &ihost->flags); + wake_up(&ihost->eventq); +} + +static void sci_controller_completion_handler(struct isci_host *ihost) +{ + /* Empty out the completion queue */ + if (sci_controller_completion_queue_has_entries(ihost)) + sci_controller_process_completions(ihost); + + /* Clear the interrupt and enable all interrupts again */ + writel(SMU_ISR_COMPLETION, &ihost->smu_registers->interrupt_status); + /* Could we write the value of SMU_ISR_COMPLETION? */ + writel(0xFF000000, &ihost->smu_registers->interrupt_mask); + writel(0, &ihost->smu_registers->interrupt_mask); +} + +/** + * isci_host_completion_routine() - This function is the delayed service + * routine that calls the sci core library's completion handler. It's + * scheduled as a tasklet from the interrupt service routine when interrupts + * in use, or set as the timeout function in polled mode. + * @data: This parameter specifies the ISCI host object + * + */ +static void isci_host_completion_routine(unsigned long data) +{ + struct isci_host *ihost = (struct isci_host *)data; + struct list_head completed_request_list; + struct list_head errored_request_list; + struct list_head *current_position; + struct list_head *next_position; + struct isci_request *request; + struct isci_request *next_request; + struct sas_task *task; + + INIT_LIST_HEAD(&completed_request_list); + INIT_LIST_HEAD(&errored_request_list); + + spin_lock_irq(&ihost->scic_lock); + + sci_controller_completion_handler(ihost); + + /* Take the lists of completed I/Os from the host. */ + + list_splice_init(&ihost->requests_to_complete, + &completed_request_list); + + /* Take the list of errored I/Os from the host. */ + list_splice_init(&ihost->requests_to_errorback, + &errored_request_list); + + spin_unlock_irq(&ihost->scic_lock); + + /* Process any completions in the lists. */ + list_for_each_safe(current_position, next_position, + &completed_request_list) { + + request = list_entry(current_position, struct isci_request, + completed_node); + task = isci_request_access_task(request); + + /* Normal notification (task_done) */ + dev_dbg(&ihost->pdev->dev, + "%s: Normal - request/task = %p/%p\n", + __func__, + request, + task); + + /* Return the task to libsas */ + if (task != NULL) { + + task->lldd_task = NULL; + if (!(task->task_state_flags & SAS_TASK_STATE_ABORTED)) { + + /* If the task is already in the abort path, + * the task_done callback cannot be called. + */ + task->task_done(task); + } + } + + spin_lock_irq(&ihost->scic_lock); + isci_free_tag(ihost, request->io_tag); + spin_unlock_irq(&ihost->scic_lock); + } + list_for_each_entry_safe(request, next_request, &errored_request_list, + completed_node) { + + task = isci_request_access_task(request); + + /* Use sas_task_abort */ + dev_warn(&ihost->pdev->dev, + "%s: Error - request/task = %p/%p\n", + __func__, + request, + task); + + if (task != NULL) { + + /* Put the task into the abort path if it's not there + * already. + */ + if (!(task->task_state_flags & SAS_TASK_STATE_ABORTED)) + sas_task_abort(task); + + } else { + /* This is a case where the request has completed with a + * status such that it needed further target servicing, + * but the sas_task reference has already been removed + * from the request. Since it was errored, it was not + * being aborted, so there is nothing to do except free + * it. + */ + + spin_lock_irq(&ihost->scic_lock); + /* Remove the request from the remote device's list + * of pending requests. + */ + list_del_init(&request->dev_node); + isci_free_tag(ihost, request->io_tag); + spin_unlock_irq(&ihost->scic_lock); + } + } + +} + +/** + * sci_controller_stop() - This method will stop an individual controller + * object.This method will invoke the associated user callback upon + * completion. The completion callback is called when the following + * conditions are met: -# the method return status is SCI_SUCCESS. -# the + * controller has been quiesced. This method will ensure that all IO + * requests are quiesced, phys are stopped, and all additional operation by + * the hardware is halted. + * @controller: the handle to the controller object to stop. + * @timeout: This parameter specifies the number of milliseconds in which the + * stop operation should complete. + * + * The controller must be in the STARTED or STOPPED state. Indicate if the + * controller stop method succeeded or failed in some way. SCI_SUCCESS if the + * stop operation successfully began. SCI_WARNING_ALREADY_IN_STATE if the + * controller is already in the STOPPED state. SCI_FAILURE_INVALID_STATE if the + * controller is not either in the STARTED or STOPPED states. + */ +static enum sci_status sci_controller_stop(struct isci_host *ihost, u32 timeout) +{ + if (ihost->sm.current_state_id != SCIC_READY) { + dev_warn(&ihost->pdev->dev, + "SCIC Controller stop operation requested in " + "invalid state\n"); + return SCI_FAILURE_INVALID_STATE; + } + + sci_mod_timer(&ihost->timer, timeout); + sci_change_state(&ihost->sm, SCIC_STOPPING); + return SCI_SUCCESS; +} + +/** + * sci_controller_reset() - This method will reset the supplied core + * controller regardless of the state of said controller. This operation is + * considered destructive. In other words, all current operations are wiped + * out. No IO completions for outstanding devices occur. Outstanding IO + * requests are not aborted or completed at the actual remote device. + * @controller: the handle to the controller object to reset. + * + * Indicate if the controller reset method succeeded or failed in some way. + * SCI_SUCCESS if the reset operation successfully started. SCI_FATAL_ERROR if + * the controller reset operation is unable to complete. + */ +static enum sci_status sci_controller_reset(struct isci_host *ihost) +{ + switch (ihost->sm.current_state_id) { + case SCIC_RESET: + case SCIC_READY: + case SCIC_STOPPED: + case SCIC_FAILED: + /* + * The reset operation is not a graceful cleanup, just + * perform the state transition. + */ + sci_change_state(&ihost->sm, SCIC_RESETTING); + return SCI_SUCCESS; + default: + dev_warn(&ihost->pdev->dev, + "SCIC Controller reset operation requested in " + "invalid state\n"); + return SCI_FAILURE_INVALID_STATE; + } +} + +void isci_host_deinit(struct isci_host *ihost) +{ + int i; + + isci_host_change_state(ihost, isci_stopping); + for (i = 0; i < SCI_MAX_PORTS; i++) { + struct isci_port *iport = &ihost->ports[i]; + struct isci_remote_device *idev, *d; + + list_for_each_entry_safe(idev, d, &iport->remote_dev_list, node) { + if (test_bit(IDEV_ALLOCATED, &idev->flags)) + isci_remote_device_stop(ihost, idev); + } + } + + set_bit(IHOST_STOP_PENDING, &ihost->flags); + + spin_lock_irq(&ihost->scic_lock); + sci_controller_stop(ihost, SCIC_CONTROLLER_STOP_TIMEOUT); + spin_unlock_irq(&ihost->scic_lock); + + wait_for_stop(ihost); + sci_controller_reset(ihost); + + /* Cancel any/all outstanding port timers */ + for (i = 0; i < ihost->logical_port_entries; i++) { + struct isci_port *iport = &ihost->ports[i]; + del_timer_sync(&iport->timer.timer); + } + + /* Cancel any/all outstanding phy timers */ + for (i = 0; i < SCI_MAX_PHYS; i++) { + struct isci_phy *iphy = &ihost->phys[i]; + del_timer_sync(&iphy->sata_timer.timer); + } + + del_timer_sync(&ihost->port_agent.timer.timer); + + del_timer_sync(&ihost->power_control.timer.timer); + + del_timer_sync(&ihost->timer.timer); + + del_timer_sync(&ihost->phy_timer.timer); +} + +static void __iomem *scu_base(struct isci_host *isci_host) +{ + struct pci_dev *pdev = isci_host->pdev; + int id = isci_host->id; + + return pcim_iomap_table(pdev)[SCI_SCU_BAR * 2] + SCI_SCU_BAR_SIZE * id; +} + +static void __iomem *smu_base(struct isci_host *isci_host) +{ + struct pci_dev *pdev = isci_host->pdev; + int id = isci_host->id; + + return pcim_iomap_table(pdev)[SCI_SMU_BAR * 2] + SCI_SMU_BAR_SIZE * id; +} + +static void isci_user_parameters_get(struct sci_user_parameters *u) +{ + int i; + + for (i = 0; i < SCI_MAX_PHYS; i++) { + struct sci_phy_user_params *u_phy = &u->phys[i]; + + u_phy->max_speed_generation = phy_gen; + + /* we are not exporting these for now */ + u_phy->align_insertion_frequency = 0x7f; + u_phy->in_connection_align_insertion_frequency = 0xff; + u_phy->notify_enable_spin_up_insertion_frequency = 0x33; + } + + u->stp_inactivity_timeout = stp_inactive_to; + u->ssp_inactivity_timeout = ssp_inactive_to; + u->stp_max_occupancy_timeout = stp_max_occ_to; + u->ssp_max_occupancy_timeout = ssp_max_occ_to; + u->no_outbound_task_timeout = no_outbound_task_to; + u->max_number_concurrent_device_spin_up = max_concurr_spinup; +} + +static void sci_controller_initial_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); + + sci_change_state(&ihost->sm, SCIC_RESET); +} + +static inline void sci_controller_starting_state_exit(struct sci_base_state_machine *sm) +{ + struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); + + sci_del_timer(&ihost->timer); +} + +#define INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_LOWER_BOUND_NS 853 +#define INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_UPPER_BOUND_NS 1280 +#define INTERRUPT_COALESCE_TIMEOUT_MAX_US 2700000 +#define INTERRUPT_COALESCE_NUMBER_MAX 256 +#define INTERRUPT_COALESCE_TIMEOUT_ENCODE_MIN 7 +#define INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX 28 + +/** + * sci_controller_set_interrupt_coalescence() - This method allows the user to + * configure the interrupt coalescence. + * @controller: This parameter represents the handle to the controller object + * for which its interrupt coalesce register is overridden. + * @coalesce_number: Used to control the number of entries in the Completion + * Queue before an interrupt is generated. If the number of entries exceed + * this number, an interrupt will be generated. The valid range of the input + * is [0, 256]. A setting of 0 results in coalescing being disabled. + * @coalesce_timeout: Timeout value in microseconds. The valid range of the + * input is [0, 2700000] . A setting of 0 is allowed and results in no + * interrupt coalescing timeout. + * + * Indicate if the user successfully set the interrupt coalesce parameters. + * SCI_SUCCESS The user successfully updated the interrutp coalescence. + * SCI_FAILURE_INVALID_PARAMETER_VALUE The user input value is out of range. + */ +static enum sci_status +sci_controller_set_interrupt_coalescence(struct isci_host *ihost, + u32 coalesce_number, + u32 coalesce_timeout) +{ + u8 timeout_encode = 0; + u32 min = 0; + u32 max = 0; + + /* Check if the input parameters fall in the range. */ + if (coalesce_number > INTERRUPT_COALESCE_NUMBER_MAX) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + + /* + * Defined encoding for interrupt coalescing timeout: + * Value Min Max Units + * ----- --- --- ----- + * 0 - - Disabled + * 1 13.3 20.0 ns + * 2 26.7 40.0 + * 3 53.3 80.0 + * 4 106.7 160.0 + * 5 213.3 320.0 + * 6 426.7 640.0 + * 7 853.3 1280.0 + * 8 1.7 2.6 us + * 9 3.4 5.1 + * 10 6.8 10.2 + * 11 13.7 20.5 + * 12 27.3 41.0 + * 13 54.6 81.9 + * 14 109.2 163.8 + * 15 218.5 327.7 + * 16 436.9 655.4 + * 17 873.8 1310.7 + * 18 1.7 2.6 ms + * 19 3.5 5.2 + * 20 7.0 10.5 + * 21 14.0 21.0 + * 22 28.0 41.9 + * 23 55.9 83.9 + * 24 111.8 167.8 + * 25 223.7 335.5 + * 26 447.4 671.1 + * 27 894.8 1342.2 + * 28 1.8 2.7 s + * Others Undefined */ + + /* + * Use the table above to decide the encode of interrupt coalescing timeout + * value for register writing. */ + if (coalesce_timeout == 0) + timeout_encode = 0; + else{ + /* make the timeout value in unit of (10 ns). */ + coalesce_timeout = coalesce_timeout * 100; + min = INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_LOWER_BOUND_NS / 10; + max = INTERRUPT_COALESCE_TIMEOUT_BASE_RANGE_UPPER_BOUND_NS / 10; + + /* get the encode of timeout for register writing. */ + for (timeout_encode = INTERRUPT_COALESCE_TIMEOUT_ENCODE_MIN; + timeout_encode <= INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX; + timeout_encode++) { + if (min <= coalesce_timeout && max > coalesce_timeout) + break; + else if (coalesce_timeout >= max && coalesce_timeout < min * 2 + && coalesce_timeout <= INTERRUPT_COALESCE_TIMEOUT_MAX_US * 100) { + if ((coalesce_timeout - max) < (2 * min - coalesce_timeout)) + break; + else{ + timeout_encode++; + break; + } + } else { + max = max * 2; + min = min * 2; + } + } + + if (timeout_encode == INTERRUPT_COALESCE_TIMEOUT_ENCODE_MAX + 1) + /* the value is out of range. */ + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + } + + writel(SMU_ICC_GEN_VAL(NUMBER, coalesce_number) | + SMU_ICC_GEN_VAL(TIMER, timeout_encode), + &ihost->smu_registers->interrupt_coalesce_control); + + + ihost->interrupt_coalesce_number = (u16)coalesce_number; + ihost->interrupt_coalesce_timeout = coalesce_timeout / 100; + + return SCI_SUCCESS; +} + + +static void sci_controller_ready_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); + + /* set the default interrupt coalescence number and timeout value. */ + sci_controller_set_interrupt_coalescence(ihost, 0x10, 250); +} + +static void sci_controller_ready_state_exit(struct sci_base_state_machine *sm) +{ + struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); + + /* disable interrupt coalescence. */ + sci_controller_set_interrupt_coalescence(ihost, 0, 0); +} + +static enum sci_status sci_controller_stop_phys(struct isci_host *ihost) +{ + u32 index; + enum sci_status status; + enum sci_status phy_status; + + status = SCI_SUCCESS; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + phy_status = sci_phy_stop(&ihost->phys[index]); + + if (phy_status != SCI_SUCCESS && + phy_status != SCI_FAILURE_INVALID_STATE) { + status = SCI_FAILURE; + + dev_warn(&ihost->pdev->dev, + "%s: Controller stop operation failed to stop " + "phy %d because of status %d.\n", + __func__, + ihost->phys[index].phy_index, phy_status); + } + } + + return status; +} + +static enum sci_status sci_controller_stop_ports(struct isci_host *ihost) +{ + u32 index; + enum sci_status port_status; + enum sci_status status = SCI_SUCCESS; + + for (index = 0; index < ihost->logical_port_entries; index++) { + struct isci_port *iport = &ihost->ports[index]; + + port_status = sci_port_stop(iport); + + if ((port_status != SCI_SUCCESS) && + (port_status != SCI_FAILURE_INVALID_STATE)) { + status = SCI_FAILURE; + + dev_warn(&ihost->pdev->dev, + "%s: Controller stop operation failed to " + "stop port %d because of status %d.\n", + __func__, + iport->logical_port_index, + port_status); + } + } + + return status; +} + +static enum sci_status sci_controller_stop_devices(struct isci_host *ihost) +{ + u32 index; + enum sci_status status; + enum sci_status device_status; + + status = SCI_SUCCESS; + + for (index = 0; index < ihost->remote_node_entries; index++) { + if (ihost->device_table[index] != NULL) { + /* / @todo What timeout value do we want to provide to this request? */ + device_status = sci_remote_device_stop(ihost->device_table[index], 0); + + if ((device_status != SCI_SUCCESS) && + (device_status != SCI_FAILURE_INVALID_STATE)) { + dev_warn(&ihost->pdev->dev, + "%s: Controller stop operation failed " + "to stop device 0x%p because of " + "status %d.\n", + __func__, + ihost->device_table[index], device_status); + } + } + } + + return status; +} + +static void sci_controller_stopping_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); + + /* Stop all of the components for this controller */ + sci_controller_stop_phys(ihost); + sci_controller_stop_ports(ihost); + sci_controller_stop_devices(ihost); +} + +static void sci_controller_stopping_state_exit(struct sci_base_state_machine *sm) +{ + struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); + + sci_del_timer(&ihost->timer); +} + +static void sci_controller_reset_hardware(struct isci_host *ihost) +{ + /* Disable interrupts so we dont take any spurious interrupts */ + sci_controller_disable_interrupts(ihost); + + /* Reset the SCU */ + writel(0xFFFFFFFF, &ihost->smu_registers->soft_reset_control); + + /* Delay for 1ms to before clearing the CQP and UFQPR. */ + udelay(1000); + + /* The write to the CQGR clears the CQP */ + writel(0x00000000, &ihost->smu_registers->completion_queue_get); + + /* The write to the UFQGP clears the UFQPR */ + writel(0, &ihost->scu_registers->sdma.unsolicited_frame_get_pointer); +} + +static void sci_controller_resetting_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); + + sci_controller_reset_hardware(ihost); + sci_change_state(&ihost->sm, SCIC_RESET); +} + +static const struct sci_base_state sci_controller_state_table[] = { + [SCIC_INITIAL] = { + .enter_state = sci_controller_initial_state_enter, + }, + [SCIC_RESET] = {}, + [SCIC_INITIALIZING] = {}, + [SCIC_INITIALIZED] = {}, + [SCIC_STARTING] = { + .exit_state = sci_controller_starting_state_exit, + }, + [SCIC_READY] = { + .enter_state = sci_controller_ready_state_enter, + .exit_state = sci_controller_ready_state_exit, + }, + [SCIC_RESETTING] = { + .enter_state = sci_controller_resetting_state_enter, + }, + [SCIC_STOPPING] = { + .enter_state = sci_controller_stopping_state_enter, + .exit_state = sci_controller_stopping_state_exit, + }, + [SCIC_STOPPED] = {}, + [SCIC_FAILED] = {} +}; + +static void sci_controller_set_default_config_parameters(struct isci_host *ihost) +{ + /* these defaults are overridden by the platform / firmware */ + u16 index; + + /* Default to APC mode. */ + ihost->oem_parameters.controller.mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE; + + /* Default to APC mode. */ + ihost->oem_parameters.controller.max_concurrent_dev_spin_up = 1; + + /* Default to no SSC operation. */ + ihost->oem_parameters.controller.do_enable_ssc = false; + + /* Initialize all of the port parameter information to narrow ports. */ + for (index = 0; index < SCI_MAX_PORTS; index++) { + ihost->oem_parameters.ports[index].phy_mask = 0; + } + + /* Initialize all of the phy parameter information. */ + for (index = 0; index < SCI_MAX_PHYS; index++) { + /* Default to 6G (i.e. Gen 3) for now. */ + ihost->user_parameters.phys[index].max_speed_generation = 3; + + /* the frequencies cannot be 0 */ + ihost->user_parameters.phys[index].align_insertion_frequency = 0x7f; + ihost->user_parameters.phys[index].in_connection_align_insertion_frequency = 0xff; + ihost->user_parameters.phys[index].notify_enable_spin_up_insertion_frequency = 0x33; + + /* + * Previous Vitesse based expanders had a arbitration issue that + * is worked around by having the upper 32-bits of SAS address + * with a value greater then the Vitesse company identifier. + * Hence, usage of 0x5FCFFFFF. */ + ihost->oem_parameters.phys[index].sas_address.low = 0x1 + ihost->id; + ihost->oem_parameters.phys[index].sas_address.high = 0x5FCFFFFF; + } + + ihost->user_parameters.stp_inactivity_timeout = 5; + ihost->user_parameters.ssp_inactivity_timeout = 5; + ihost->user_parameters.stp_max_occupancy_timeout = 5; + ihost->user_parameters.ssp_max_occupancy_timeout = 20; + ihost->user_parameters.no_outbound_task_timeout = 20; +} + +static void controller_timeout(unsigned long data) +{ + struct sci_timer *tmr = (struct sci_timer *)data; + struct isci_host *ihost = container_of(tmr, typeof(*ihost), timer); + struct sci_base_state_machine *sm = &ihost->sm; + unsigned long flags; + + spin_lock_irqsave(&ihost->scic_lock, flags); + + if (tmr->cancel) + goto done; + + if (sm->current_state_id == SCIC_STARTING) + sci_controller_transition_to_ready(ihost, SCI_FAILURE_TIMEOUT); + else if (sm->current_state_id == SCIC_STOPPING) { + sci_change_state(sm, SCIC_FAILED); + isci_host_stop_complete(ihost, SCI_FAILURE_TIMEOUT); + } else /* / @todo Now what do we want to do in this case? */ + dev_err(&ihost->pdev->dev, + "%s: Controller timer fired when controller was not " + "in a state being timed.\n", + __func__); + +done: + spin_unlock_irqrestore(&ihost->scic_lock, flags); +} + +static enum sci_status sci_controller_construct(struct isci_host *ihost, + void __iomem *scu_base, + void __iomem *smu_base) +{ + u8 i; + + sci_init_sm(&ihost->sm, sci_controller_state_table, SCIC_INITIAL); + + ihost->scu_registers = scu_base; + ihost->smu_registers = smu_base; + + sci_port_configuration_agent_construct(&ihost->port_agent); + + /* Construct the ports for this controller */ + for (i = 0; i < SCI_MAX_PORTS; i++) + sci_port_construct(&ihost->ports[i], i, ihost); + sci_port_construct(&ihost->ports[i], SCIC_SDS_DUMMY_PORT, ihost); + + /* Construct the phys for this controller */ + for (i = 0; i < SCI_MAX_PHYS; i++) { + /* Add all the PHYs to the dummy port */ + sci_phy_construct(&ihost->phys[i], + &ihost->ports[SCI_MAX_PORTS], i); + } + + ihost->invalid_phy_mask = 0; + + sci_init_timer(&ihost->timer, controller_timeout); + + /* Initialize the User and OEM parameters to default values. */ + sci_controller_set_default_config_parameters(ihost); + + return sci_controller_reset(ihost); +} + +int sci_oem_parameters_validate(struct sci_oem_params *oem) +{ + int i; + + for (i = 0; i < SCI_MAX_PORTS; i++) + if (oem->ports[i].phy_mask > SCIC_SDS_PARM_PHY_MASK_MAX) + return -EINVAL; + + for (i = 0; i < SCI_MAX_PHYS; i++) + if (oem->phys[i].sas_address.high == 0 && + oem->phys[i].sas_address.low == 0) + return -EINVAL; + + if (oem->controller.mode_type == SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE) { + for (i = 0; i < SCI_MAX_PHYS; i++) + if (oem->ports[i].phy_mask != 0) + return -EINVAL; + } else if (oem->controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { + u8 phy_mask = 0; + + for (i = 0; i < SCI_MAX_PHYS; i++) + phy_mask |= oem->ports[i].phy_mask; + + if (phy_mask == 0) + return -EINVAL; + } else + return -EINVAL; + + if (oem->controller.max_concurrent_dev_spin_up > MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT) + return -EINVAL; + + return 0; +} + +static enum sci_status sci_oem_parameters_set(struct isci_host *ihost) +{ + u32 state = ihost->sm.current_state_id; + + if (state == SCIC_RESET || + state == SCIC_INITIALIZING || + state == SCIC_INITIALIZED) { + + if (sci_oem_parameters_validate(&ihost->oem_parameters)) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + + return SCI_SUCCESS; + } + + return SCI_FAILURE_INVALID_STATE; +} + +static void power_control_timeout(unsigned long data) +{ + struct sci_timer *tmr = (struct sci_timer *)data; + struct isci_host *ihost = container_of(tmr, typeof(*ihost), power_control.timer); + struct isci_phy *iphy; + unsigned long flags; + u8 i; + + spin_lock_irqsave(&ihost->scic_lock, flags); + + if (tmr->cancel) + goto done; + + ihost->power_control.phys_granted_power = 0; + + if (ihost->power_control.phys_waiting == 0) { + ihost->power_control.timer_started = false; + goto done; + } + + for (i = 0; i < SCI_MAX_PHYS; i++) { + + if (ihost->power_control.phys_waiting == 0) + break; + + iphy = ihost->power_control.requesters[i]; + if (iphy == NULL) + continue; + + if (ihost->power_control.phys_granted_power >= + ihost->oem_parameters.controller.max_concurrent_dev_spin_up) + break; + + ihost->power_control.requesters[i] = NULL; + ihost->power_control.phys_waiting--; + ihost->power_control.phys_granted_power++; + sci_phy_consume_power_handler(iphy); + } + + /* + * It doesn't matter if the power list is empty, we need to start the + * timer in case another phy becomes ready. + */ + sci_mod_timer(tmr, SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL); + ihost->power_control.timer_started = true; + +done: + spin_unlock_irqrestore(&ihost->scic_lock, flags); +} + +void sci_controller_power_control_queue_insert(struct isci_host *ihost, + struct isci_phy *iphy) +{ + BUG_ON(iphy == NULL); + + if (ihost->power_control.phys_granted_power < + ihost->oem_parameters.controller.max_concurrent_dev_spin_up) { + ihost->power_control.phys_granted_power++; + sci_phy_consume_power_handler(iphy); + + /* + * stop and start the power_control timer. When the timer fires, the + * no_of_phys_granted_power will be set to 0 + */ + if (ihost->power_control.timer_started) + sci_del_timer(&ihost->power_control.timer); + + sci_mod_timer(&ihost->power_control.timer, + SCIC_SDS_CONTROLLER_POWER_CONTROL_INTERVAL); + ihost->power_control.timer_started = true; + + } else { + /* Add the phy in the waiting list */ + ihost->power_control.requesters[iphy->phy_index] = iphy; + ihost->power_control.phys_waiting++; + } +} + +void sci_controller_power_control_queue_remove(struct isci_host *ihost, + struct isci_phy *iphy) +{ + BUG_ON(iphy == NULL); + + if (ihost->power_control.requesters[iphy->phy_index]) + ihost->power_control.phys_waiting--; + + ihost->power_control.requesters[iphy->phy_index] = NULL; +} + +#define AFE_REGISTER_WRITE_DELAY 10 + +/* Initialize the AFE for this phy index. We need to read the AFE setup from + * the OEM parameters + */ +static void sci_controller_afe_initialization(struct isci_host *ihost) +{ + const struct sci_oem_params *oem = &ihost->oem_parameters; + struct pci_dev *pdev = ihost->pdev; + u32 afe_status; + u32 phy_id; + + /* Clear DFX Status registers */ + writel(0x0081000f, &ihost->scu_registers->afe.afe_dfx_master_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + + if (is_b0(pdev)) { + /* PM Rx Equalization Save, PM SPhy Rx Acknowledgement + * Timer, PM Stagger Timer */ + writel(0x0007BFFF, &ihost->scu_registers->afe.afe_pmsn_master_control2); + udelay(AFE_REGISTER_WRITE_DELAY); + } + + /* Configure bias currents to normal */ + if (is_a2(pdev)) + writel(0x00005A00, &ihost->scu_registers->afe.afe_bias_control); + else if (is_b0(pdev) || is_c0(pdev)) + writel(0x00005F00, &ihost->scu_registers->afe.afe_bias_control); + + udelay(AFE_REGISTER_WRITE_DELAY); + + /* Enable PLL */ + if (is_b0(pdev) || is_c0(pdev)) + writel(0x80040A08, &ihost->scu_registers->afe.afe_pll_control0); + else + writel(0x80040908, &ihost->scu_registers->afe.afe_pll_control0); + + udelay(AFE_REGISTER_WRITE_DELAY); + + /* Wait for the PLL to lock */ + do { + afe_status = readl(&ihost->scu_registers->afe.afe_common_block_status); + udelay(AFE_REGISTER_WRITE_DELAY); + } while ((afe_status & 0x00001000) == 0); + + if (is_a2(pdev)) { + /* Shorten SAS SNW lock time (RxLock timer value from 76 us to 50 us) */ + writel(0x7bcc96ad, &ihost->scu_registers->afe.afe_pmsn_master_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + } + + for (phy_id = 0; phy_id < SCI_MAX_PHYS; phy_id++) { + const struct sci_phy_oem_params *oem_phy = &oem->phys[phy_id]; + + if (is_b0(pdev)) { + /* Configure transmitter SSC parameters */ + writel(0x00030000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control); + udelay(AFE_REGISTER_WRITE_DELAY); + } else if (is_c0(pdev)) { + /* Configure transmitter SSC parameters */ + writel(0x0003000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_ssc_control); + udelay(AFE_REGISTER_WRITE_DELAY); + + /* + * All defaults, except the Receive Word Alignament/Comma Detect + * Enable....(0xe800) */ + writel(0x00004500, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + } else { + /* + * All defaults, except the Receive Word Alignament/Comma Detect + * Enable....(0xe800) */ + writel(0x00004512, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(0x0050100F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control1); + udelay(AFE_REGISTER_WRITE_DELAY); + } + + /* + * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) + * & increase TX int & ext bias 20%....(0xe85c) */ + if (is_a2(pdev)) + writel(0x000003F0, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + else if (is_b0(pdev)) { + /* Power down TX and RX (PWRDNTX and PWRDNRX) */ + writel(0x000003D7, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + udelay(AFE_REGISTER_WRITE_DELAY); + + /* + * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) + * & increase TX int & ext bias 20%....(0xe85c) */ + writel(0x000003D4, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + } else { + writel(0x000001E7, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + udelay(AFE_REGISTER_WRITE_DELAY); + + /* + * Power up TX and RX out from power down (PWRDNTX and PWRDNRX) + * & increase TX int & ext bias 20%....(0xe85c) */ + writel(0x000001E4, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_channel_control); + } + udelay(AFE_REGISTER_WRITE_DELAY); + + if (is_a2(pdev)) { + /* Enable TX equalization (0xe824) */ + writel(0x00040000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); + udelay(AFE_REGISTER_WRITE_DELAY); + } + + /* + * RDPI=0x0(RX Power On), RXOOBDETPDNC=0x0, TPD=0x0(TX Power On), + * RDD=0x0(RX Detect Enabled) ....(0xe800) */ + writel(0x00004100, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_xcvr_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + + /* Leave DFE/FFE on */ + if (is_a2(pdev)) + writel(0x3F11103F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); + else if (is_b0(pdev)) { + writel(0x3F11103F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + /* Enable TX equalization (0xe824) */ + writel(0x00040000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); + } else { + writel(0x0140DF0F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control1); + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(0x3F6F103F, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_rx_ssc_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + + /* Enable TX equalization (0xe824) */ + writel(0x00040000, &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_control); + } + + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(oem_phy->afe_tx_amp_control0, + &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control0); + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(oem_phy->afe_tx_amp_control1, + &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control1); + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(oem_phy->afe_tx_amp_control2, + &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control2); + udelay(AFE_REGISTER_WRITE_DELAY); + + writel(oem_phy->afe_tx_amp_control3, + &ihost->scu_registers->afe.scu_afe_xcvr[phy_id].afe_tx_amp_control3); + udelay(AFE_REGISTER_WRITE_DELAY); + } + + /* Transfer control to the PEs */ + writel(0x00010f00, &ihost->scu_registers->afe.afe_dfx_master_control0); + udelay(AFE_REGISTER_WRITE_DELAY); +} + +static void sci_controller_initialize_power_control(struct isci_host *ihost) +{ + sci_init_timer(&ihost->power_control.timer, power_control_timeout); + + memset(ihost->power_control.requesters, 0, + sizeof(ihost->power_control.requesters)); + + ihost->power_control.phys_waiting = 0; + ihost->power_control.phys_granted_power = 0; +} + +static enum sci_status sci_controller_initialize(struct isci_host *ihost) +{ + struct sci_base_state_machine *sm = &ihost->sm; + enum sci_status result = SCI_FAILURE; + unsigned long i, state, val; + + if (ihost->sm.current_state_id != SCIC_RESET) { + dev_warn(&ihost->pdev->dev, + "SCIC Controller initialize operation requested " + "in invalid state\n"); + return SCI_FAILURE_INVALID_STATE; + } + + sci_change_state(sm, SCIC_INITIALIZING); + + sci_init_timer(&ihost->phy_timer, phy_startup_timeout); + + ihost->next_phy_to_start = 0; + ihost->phy_startup_timer_pending = false; + + sci_controller_initialize_power_control(ihost); + + /* + * There is nothing to do here for B0 since we do not have to + * program the AFE registers. + * / @todo The AFE settings are supposed to be correct for the B0 but + * / presently they seem to be wrong. */ + sci_controller_afe_initialization(ihost); + + + /* Take the hardware out of reset */ + writel(0, &ihost->smu_registers->soft_reset_control); + + /* + * / @todo Provide meaningfull error code for hardware failure + * result = SCI_FAILURE_CONTROLLER_HARDWARE; */ + for (i = 100; i >= 1; i--) { + u32 status; + + /* Loop until the hardware reports success */ + udelay(SCU_CONTEXT_RAM_INIT_STALL_TIME); + status = readl(&ihost->smu_registers->control_status); + + if ((status & SCU_RAM_INIT_COMPLETED) == SCU_RAM_INIT_COMPLETED) + break; + } + if (i == 0) + goto out; + + /* + * Determine what are the actaul device capacities that the + * hardware will support */ + val = readl(&ihost->smu_registers->device_context_capacity); + + /* Record the smaller of the two capacity values */ + ihost->logical_port_entries = min(smu_max_ports(val), SCI_MAX_PORTS); + ihost->task_context_entries = min(smu_max_task_contexts(val), SCI_MAX_IO_REQUESTS); + ihost->remote_node_entries = min(smu_max_rncs(val), SCI_MAX_REMOTE_DEVICES); + + /* + * Make all PEs that are unassigned match up with the + * logical ports + */ + for (i = 0; i < ihost->logical_port_entries; i++) { + struct scu_port_task_scheduler_group_registers __iomem + *ptsg = &ihost->scu_registers->peg0.ptsg; + + writel(i, &ptsg->protocol_engine[i]); + } + + /* Initialize hardware PCI Relaxed ordering in DMA engines */ + val = readl(&ihost->scu_registers->sdma.pdma_configuration); + val |= SCU_PDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE); + writel(val, &ihost->scu_registers->sdma.pdma_configuration); + + val = readl(&ihost->scu_registers->sdma.cdma_configuration); + val |= SCU_CDMACR_GEN_BIT(PCI_RELAXED_ORDERING_ENABLE); + writel(val, &ihost->scu_registers->sdma.cdma_configuration); + + /* + * Initialize the PHYs before the PORTs because the PHY registers + * are accessed during the port initialization. + */ + for (i = 0; i < SCI_MAX_PHYS; i++) { + result = sci_phy_initialize(&ihost->phys[i], + &ihost->scu_registers->peg0.pe[i].tl, + &ihost->scu_registers->peg0.pe[i].ll); + if (result != SCI_SUCCESS) + goto out; + } + + for (i = 0; i < ihost->logical_port_entries; i++) { + struct isci_port *iport = &ihost->ports[i]; + + iport->port_task_scheduler_registers = &ihost->scu_registers->peg0.ptsg.port[i]; + iport->port_pe_configuration_register = &ihost->scu_registers->peg0.ptsg.protocol_engine[0]; + iport->viit_registers = &ihost->scu_registers->peg0.viit[i]; + } + + result = sci_port_configuration_agent_initialize(ihost, &ihost->port_agent); + + out: + /* Advance the controller state machine */ + if (result == SCI_SUCCESS) + state = SCIC_INITIALIZED; + else + state = SCIC_FAILED; + sci_change_state(sm, state); + + return result; +} + +static enum sci_status sci_user_parameters_set(struct isci_host *ihost, + struct sci_user_parameters *sci_parms) +{ + u32 state = ihost->sm.current_state_id; + + if (state == SCIC_RESET || + state == SCIC_INITIALIZING || + state == SCIC_INITIALIZED) { + u16 index; + + /* + * Validate the user parameters. If they are not legal, then + * return a failure. + */ + for (index = 0; index < SCI_MAX_PHYS; index++) { + struct sci_phy_user_params *user_phy; + + user_phy = &sci_parms->phys[index]; + + if (!((user_phy->max_speed_generation <= + SCIC_SDS_PARM_MAX_SPEED) && + (user_phy->max_speed_generation > + SCIC_SDS_PARM_NO_SPEED))) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + + if (user_phy->in_connection_align_insertion_frequency < + 3) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + + if ((user_phy->in_connection_align_insertion_frequency < + 3) || + (user_phy->align_insertion_frequency == 0) || + (user_phy-> + notify_enable_spin_up_insertion_frequency == + 0)) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + } + + if ((sci_parms->stp_inactivity_timeout == 0) || + (sci_parms->ssp_inactivity_timeout == 0) || + (sci_parms->stp_max_occupancy_timeout == 0) || + (sci_parms->ssp_max_occupancy_timeout == 0) || + (sci_parms->no_outbound_task_timeout == 0)) + return SCI_FAILURE_INVALID_PARAMETER_VALUE; + + memcpy(&ihost->user_parameters, sci_parms, sizeof(*sci_parms)); + + return SCI_SUCCESS; + } + + return SCI_FAILURE_INVALID_STATE; +} + +static int sci_controller_mem_init(struct isci_host *ihost) +{ + struct device *dev = &ihost->pdev->dev; + dma_addr_t dma; + size_t size; + int err; + + size = SCU_MAX_COMPLETION_QUEUE_ENTRIES * sizeof(u32); + ihost->completion_queue = dmam_alloc_coherent(dev, size, &dma, GFP_KERNEL); + if (!ihost->completion_queue) + return -ENOMEM; + + writel(lower_32_bits(dma), &ihost->smu_registers->completion_queue_lower); + writel(upper_32_bits(dma), &ihost->smu_registers->completion_queue_upper); + + size = ihost->remote_node_entries * sizeof(union scu_remote_node_context); + ihost->remote_node_context_table = dmam_alloc_coherent(dev, size, &dma, + GFP_KERNEL); + if (!ihost->remote_node_context_table) + return -ENOMEM; + + writel(lower_32_bits(dma), &ihost->smu_registers->remote_node_context_lower); + writel(upper_32_bits(dma), &ihost->smu_registers->remote_node_context_upper); + + size = ihost->task_context_entries * sizeof(struct scu_task_context), + ihost->task_context_table = dmam_alloc_coherent(dev, size, &dma, GFP_KERNEL); + if (!ihost->task_context_table) + return -ENOMEM; + + ihost->task_context_dma = dma; + writel(lower_32_bits(dma), &ihost->smu_registers->host_task_table_lower); + writel(upper_32_bits(dma), &ihost->smu_registers->host_task_table_upper); + + err = sci_unsolicited_frame_control_construct(ihost); + if (err) + return err; + + /* + * Inform the silicon as to the location of the UF headers and + * address table. + */ + writel(lower_32_bits(ihost->uf_control.headers.physical_address), + &ihost->scu_registers->sdma.uf_header_base_address_lower); + writel(upper_32_bits(ihost->uf_control.headers.physical_address), + &ihost->scu_registers->sdma.uf_header_base_address_upper); + + writel(lower_32_bits(ihost->uf_control.address_table.physical_address), + &ihost->scu_registers->sdma.uf_address_table_lower); + writel(upper_32_bits(ihost->uf_control.address_table.physical_address), + &ihost->scu_registers->sdma.uf_address_table_upper); + + return 0; +} + +int isci_host_init(struct isci_host *ihost) +{ + int err = 0, i; + enum sci_status status; + struct sci_user_parameters sci_user_params; + struct isci_pci_info *pci_info = to_pci_info(ihost->pdev); + + spin_lock_init(&ihost->state_lock); + spin_lock_init(&ihost->scic_lock); + init_waitqueue_head(&ihost->eventq); + + isci_host_change_state(ihost, isci_starting); + + status = sci_controller_construct(ihost, scu_base(ihost), + smu_base(ihost)); + + if (status != SCI_SUCCESS) { + dev_err(&ihost->pdev->dev, + "%s: sci_controller_construct failed - status = %x\n", + __func__, + status); + return -ENODEV; + } + + ihost->sas_ha.dev = &ihost->pdev->dev; + ihost->sas_ha.lldd_ha = ihost; + + /* + * grab initial values stored in the controller object for OEM and USER + * parameters + */ + isci_user_parameters_get(&sci_user_params); + status = sci_user_parameters_set(ihost, &sci_user_params); + if (status != SCI_SUCCESS) { + dev_warn(&ihost->pdev->dev, + "%s: sci_user_parameters_set failed\n", + __func__); + return -ENODEV; + } + + /* grab any OEM parameters specified in orom */ + if (pci_info->orom) { + status = isci_parse_oem_parameters(&ihost->oem_parameters, + pci_info->orom, + ihost->id); + if (status != SCI_SUCCESS) { + dev_warn(&ihost->pdev->dev, + "parsing firmware oem parameters failed\n"); + return -EINVAL; + } + } + + status = sci_oem_parameters_set(ihost); + if (status != SCI_SUCCESS) { + dev_warn(&ihost->pdev->dev, + "%s: sci_oem_parameters_set failed\n", + __func__); + return -ENODEV; + } + + tasklet_init(&ihost->completion_tasklet, + isci_host_completion_routine, (unsigned long)ihost); + + INIT_LIST_HEAD(&ihost->requests_to_complete); + INIT_LIST_HEAD(&ihost->requests_to_errorback); + + spin_lock_irq(&ihost->scic_lock); + status = sci_controller_initialize(ihost); + spin_unlock_irq(&ihost->scic_lock); + if (status != SCI_SUCCESS) { + dev_warn(&ihost->pdev->dev, + "%s: sci_controller_initialize failed -" + " status = 0x%x\n", + __func__, status); + return -ENODEV; + } + + err = sci_controller_mem_init(ihost); + if (err) + return err; + + for (i = 0; i < SCI_MAX_PORTS; i++) + isci_port_init(&ihost->ports[i], ihost, i); + + for (i = 0; i < SCI_MAX_PHYS; i++) + isci_phy_init(&ihost->phys[i], ihost, i); + + for (i = 0; i < SCI_MAX_REMOTE_DEVICES; i++) { + struct isci_remote_device *idev = &ihost->devices[i]; + + INIT_LIST_HEAD(&idev->reqs_in_process); + INIT_LIST_HEAD(&idev->node); + } + + for (i = 0; i < SCI_MAX_IO_REQUESTS; i++) { + struct isci_request *ireq; + dma_addr_t dma; + + ireq = dmam_alloc_coherent(&ihost->pdev->dev, + sizeof(struct isci_request), &dma, + GFP_KERNEL); + if (!ireq) + return -ENOMEM; + + ireq->tc = &ihost->task_context_table[i]; + ireq->owning_controller = ihost; + spin_lock_init(&ireq->state_lock); + ireq->request_daddr = dma; + ireq->isci_host = ihost; + ihost->reqs[i] = ireq; + } + + return 0; +} + +void sci_controller_link_up(struct isci_host *ihost, struct isci_port *iport, + struct isci_phy *iphy) +{ + switch (ihost->sm.current_state_id) { + case SCIC_STARTING: + sci_del_timer(&ihost->phy_timer); + ihost->phy_startup_timer_pending = false; + ihost->port_agent.link_up_handler(ihost, &ihost->port_agent, + iport, iphy); + sci_controller_start_next_phy(ihost); + break; + case SCIC_READY: + ihost->port_agent.link_up_handler(ihost, &ihost->port_agent, + iport, iphy); + break; + default: + dev_dbg(&ihost->pdev->dev, + "%s: SCIC Controller linkup event from phy %d in " + "unexpected state %d\n", __func__, iphy->phy_index, + ihost->sm.current_state_id); + } +} + +void sci_controller_link_down(struct isci_host *ihost, struct isci_port *iport, + struct isci_phy *iphy) +{ + switch (ihost->sm.current_state_id) { + case SCIC_STARTING: + case SCIC_READY: + ihost->port_agent.link_down_handler(ihost, &ihost->port_agent, + iport, iphy); + break; + default: + dev_dbg(&ihost->pdev->dev, + "%s: SCIC Controller linkdown event from phy %d in " + "unexpected state %d\n", + __func__, + iphy->phy_index, + ihost->sm.current_state_id); + } +} + +static bool sci_controller_has_remote_devices_stopping(struct isci_host *ihost) +{ + u32 index; + + for (index = 0; index < ihost->remote_node_entries; index++) { + if ((ihost->device_table[index] != NULL) && + (ihost->device_table[index]->sm.current_state_id == SCI_DEV_STOPPING)) + return true; + } + + return false; +} + +void sci_controller_remote_device_stopped(struct isci_host *ihost, + struct isci_remote_device *idev) +{ + if (ihost->sm.current_state_id != SCIC_STOPPING) { + dev_dbg(&ihost->pdev->dev, + "SCIC Controller 0x%p remote device stopped event " + "from device 0x%p in unexpected state %d\n", + ihost, idev, + ihost->sm.current_state_id); + return; + } + + if (!sci_controller_has_remote_devices_stopping(ihost)) + sci_change_state(&ihost->sm, SCIC_STOPPED); +} + +void sci_controller_post_request(struct isci_host *ihost, u32 request) +{ + dev_dbg(&ihost->pdev->dev, "%s[%d]: %#x\n", + __func__, ihost->id, request); + + writel(request, &ihost->smu_registers->post_context_port); +} + +struct isci_request *sci_request_by_tag(struct isci_host *ihost, u16 io_tag) +{ + u16 task_index; + u16 task_sequence; + + task_index = ISCI_TAG_TCI(io_tag); + + if (task_index < ihost->task_context_entries) { + struct isci_request *ireq = ihost->reqs[task_index]; + + if (test_bit(IREQ_ACTIVE, &ireq->flags)) { + task_sequence = ISCI_TAG_SEQ(io_tag); + + if (task_sequence == ihost->io_request_sequence[task_index]) + return ireq; + } + } + + return NULL; +} + +/** + * This method allocates remote node index and the reserves the remote node + * context space for use. This method can fail if there are no more remote + * node index available. + * @scic: This is the controller object which contains the set of + * free remote node ids + * @sci_dev: This is the device object which is requesting the a remote node + * id + * @node_id: This is the remote node id that is assinged to the device if one + * is available + * + * enum sci_status SCI_FAILURE_OUT_OF_RESOURCES if there are no available remote + * node index available. + */ +enum sci_status sci_controller_allocate_remote_node_context(struct isci_host *ihost, + struct isci_remote_device *idev, + u16 *node_id) +{ + u16 node_index; + u32 remote_node_count = sci_remote_device_node_count(idev); + + node_index = sci_remote_node_table_allocate_remote_node( + &ihost->available_remote_nodes, remote_node_count + ); + + if (node_index != SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { + ihost->device_table[node_index] = idev; + + *node_id = node_index; + + return SCI_SUCCESS; + } + + return SCI_FAILURE_INSUFFICIENT_RESOURCES; +} + +void sci_controller_free_remote_node_context(struct isci_host *ihost, + struct isci_remote_device *idev, + u16 node_id) +{ + u32 remote_node_count = sci_remote_device_node_count(idev); + + if (ihost->device_table[node_id] == idev) { + ihost->device_table[node_id] = NULL; + + sci_remote_node_table_release_remote_node_index( + &ihost->available_remote_nodes, remote_node_count, node_id + ); + } +} + +void sci_controller_copy_sata_response(void *response_buffer, + void *frame_header, + void *frame_buffer) +{ + /* XXX type safety? */ + memcpy(response_buffer, frame_header, sizeof(u32)); + + memcpy(response_buffer + sizeof(u32), + frame_buffer, + sizeof(struct dev_to_host_fis) - sizeof(u32)); +} + +void sci_controller_release_frame(struct isci_host *ihost, u32 frame_index) +{ + if (sci_unsolicited_frame_control_release_frame(&ihost->uf_control, frame_index)) + writel(ihost->uf_control.get, + &ihost->scu_registers->sdma.unsolicited_frame_get_pointer); +} + +void isci_tci_free(struct isci_host *ihost, u16 tci) +{ + u16 tail = ihost->tci_tail & (SCI_MAX_IO_REQUESTS-1); + + ihost->tci_pool[tail] = tci; + ihost->tci_tail = tail + 1; +} + +static u16 isci_tci_alloc(struct isci_host *ihost) +{ + u16 head = ihost->tci_head & (SCI_MAX_IO_REQUESTS-1); + u16 tci = ihost->tci_pool[head]; + + ihost->tci_head = head + 1; + return tci; +} + +static u16 isci_tci_space(struct isci_host *ihost) +{ + return CIRC_SPACE(ihost->tci_head, ihost->tci_tail, SCI_MAX_IO_REQUESTS); +} + +u16 isci_alloc_tag(struct isci_host *ihost) +{ + if (isci_tci_space(ihost)) { + u16 tci = isci_tci_alloc(ihost); + u8 seq = ihost->io_request_sequence[tci]; + + return ISCI_TAG(seq, tci); + } + + return SCI_CONTROLLER_INVALID_IO_TAG; +} + +enum sci_status isci_free_tag(struct isci_host *ihost, u16 io_tag) +{ + u16 tci = ISCI_TAG_TCI(io_tag); + u16 seq = ISCI_TAG_SEQ(io_tag); + + /* prevent tail from passing head */ + if (isci_tci_active(ihost) == 0) + return SCI_FAILURE_INVALID_IO_TAG; + + if (seq == ihost->io_request_sequence[tci]) { + ihost->io_request_sequence[tci] = (seq+1) & (SCI_MAX_SEQ-1); + + isci_tci_free(ihost, tci); + + return SCI_SUCCESS; + } + return SCI_FAILURE_INVALID_IO_TAG; +} + +enum sci_status sci_controller_start_io(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq) +{ + enum sci_status status; + + if (ihost->sm.current_state_id != SCIC_READY) { + dev_warn(&ihost->pdev->dev, "invalid state to start I/O"); + return SCI_FAILURE_INVALID_STATE; + } + + status = sci_remote_device_start_io(ihost, idev, ireq); + if (status != SCI_SUCCESS) + return status; + + set_bit(IREQ_ACTIVE, &ireq->flags); + sci_controller_post_request(ihost, ireq->post_context); + return SCI_SUCCESS; +} + +enum sci_status sci_controller_terminate_request(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq) +{ + /* terminate an ongoing (i.e. started) core IO request. This does not + * abort the IO request at the target, but rather removes the IO + * request from the host controller. + */ + enum sci_status status; + + if (ihost->sm.current_state_id != SCIC_READY) { + dev_warn(&ihost->pdev->dev, + "invalid state to terminate request\n"); + return SCI_FAILURE_INVALID_STATE; + } + + status = sci_io_request_terminate(ireq); + if (status != SCI_SUCCESS) + return status; + + /* + * Utilize the original post context command and or in the POST_TC_ABORT + * request sub-type. + */ + sci_controller_post_request(ihost, + ireq->post_context | SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT); + return SCI_SUCCESS; +} + +/** + * sci_controller_complete_io() - This method will perform core specific + * completion operations for an IO request. After this method is invoked, + * the user should consider the IO request as invalid until it is properly + * reused (i.e. re-constructed). + * @ihost: The handle to the controller object for which to complete the + * IO request. + * @idev: The handle to the remote device object for which to complete + * the IO request. + * @ireq: the handle to the io request object to complete. + */ +enum sci_status sci_controller_complete_io(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq) +{ + enum sci_status status; + u16 index; + + switch (ihost->sm.current_state_id) { + case SCIC_STOPPING: + /* XXX: Implement this function */ + return SCI_FAILURE; + case SCIC_READY: + status = sci_remote_device_complete_io(ihost, idev, ireq); + if (status != SCI_SUCCESS) + return status; + + index = ISCI_TAG_TCI(ireq->io_tag); + clear_bit(IREQ_ACTIVE, &ireq->flags); + return SCI_SUCCESS; + default: + dev_warn(&ihost->pdev->dev, "invalid state to complete I/O"); + return SCI_FAILURE_INVALID_STATE; + } + +} + +enum sci_status sci_controller_continue_io(struct isci_request *ireq) +{ + struct isci_host *ihost = ireq->owning_controller; + + if (ihost->sm.current_state_id != SCIC_READY) { + dev_warn(&ihost->pdev->dev, "invalid state to continue I/O"); + return SCI_FAILURE_INVALID_STATE; + } + + set_bit(IREQ_ACTIVE, &ireq->flags); + sci_controller_post_request(ihost, ireq->post_context); + return SCI_SUCCESS; +} + +/** + * sci_controller_start_task() - This method is called by the SCIC user to + * send/start a framework task management request. + * @controller: the handle to the controller object for which to start the task + * management request. + * @remote_device: the handle to the remote device object for which to start + * the task management request. + * @task_request: the handle to the task request object to start. + */ +enum sci_task_status sci_controller_start_task(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq) +{ + enum sci_status status; + + if (ihost->sm.current_state_id != SCIC_READY) { + dev_warn(&ihost->pdev->dev, + "%s: SCIC Controller starting task from invalid " + "state\n", + __func__); + return SCI_TASK_FAILURE_INVALID_STATE; + } + + status = sci_remote_device_start_task(ihost, idev, ireq); + switch (status) { + case SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS: + set_bit(IREQ_ACTIVE, &ireq->flags); + + /* + * We will let framework know this task request started successfully, + * although core is still woring on starting the request (to post tc when + * RNC is resumed.) + */ + return SCI_SUCCESS; + case SCI_SUCCESS: + set_bit(IREQ_ACTIVE, &ireq->flags); + sci_controller_post_request(ihost, ireq->post_context); + break; + default: + break; + } + + return status; +} diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h new file mode 100644 index 000000000000..062101a39f79 --- /dev/null +++ b/drivers/scsi/isci/host.h @@ -0,0 +1,542 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef _SCI_HOST_H_ +#define _SCI_HOST_H_ + +#include "remote_device.h" +#include "phy.h" +#include "isci.h" +#include "remote_node_table.h" +#include "registers.h" +#include "unsolicited_frame_control.h" +#include "probe_roms.h" + +struct isci_request; +struct scu_task_context; + + +/** + * struct sci_power_control - + * + * This structure defines the fields for managing power control for direct + * attached disk devices. + */ +struct sci_power_control { + /** + * This field is set when the power control timer is running and cleared when + * it is not. + */ + bool timer_started; + + /** + * Timer to control when the directed attached disks can consume power. + */ + struct sci_timer timer; + + /** + * This field is used to keep track of how many phys are put into the + * requesters field. + */ + u8 phys_waiting; + + /** + * This field is used to keep track of how many phys have been granted to consume power + */ + u8 phys_granted_power; + + /** + * This field is an array of phys that we are waiting on. The phys are direct + * mapped into requesters via struct sci_phy.phy_index + */ + struct isci_phy *requesters[SCI_MAX_PHYS]; + +}; + +struct sci_port_configuration_agent; +typedef void (*port_config_fn)(struct isci_host *, + struct sci_port_configuration_agent *, + struct isci_port *, struct isci_phy *); + +struct sci_port_configuration_agent { + u16 phy_configured_mask; + u16 phy_ready_mask; + struct { + u8 min_index; + u8 max_index; + } phy_valid_port_range[SCI_MAX_PHYS]; + bool timer_pending; + port_config_fn link_up_handler; + port_config_fn link_down_handler; + struct sci_timer timer; +}; + +/** + * isci_host - primary host/controller object + * @timer: timeout start/stop operations + * @device_table: rni (hw remote node index) to remote device lookup table + * @available_remote_nodes: rni allocator + * @power_control: manage device spin up + * @io_request_sequence: generation number for tci's (task contexts) + * @task_context_table: hw task context table + * @remote_node_context_table: hw remote node context table + * @completion_queue: hw-producer driver-consumer communication ring + * @completion_queue_get: tracks the driver 'head' of the ring to notify hw + * @logical_port_entries: min({driver|silicon}-supported-port-count) + * @remote_node_entries: min({driver|silicon}-supported-node-count) + * @task_context_entries: min({driver|silicon}-supported-task-count) + * @phy_timer: phy startup timer + * @invalid_phy_mask: if an invalid_link_up notification is reported a bit for + * the phy index is set so further notifications are not + * made. Once the phy reports link up and is made part of a + * port then this bit is cleared. + + */ +struct isci_host { + struct sci_base_state_machine sm; + /* XXX can we time this externally */ + struct sci_timer timer; + /* XXX drop reference module params directly */ + struct sci_user_parameters user_parameters; + /* XXX no need to be a union */ + struct sci_oem_params oem_parameters; + struct sci_port_configuration_agent port_agent; + struct isci_remote_device *device_table[SCI_MAX_REMOTE_DEVICES]; + struct sci_remote_node_table available_remote_nodes; + struct sci_power_control power_control; + u8 io_request_sequence[SCI_MAX_IO_REQUESTS]; + struct scu_task_context *task_context_table; + dma_addr_t task_context_dma; + union scu_remote_node_context *remote_node_context_table; + u32 *completion_queue; + u32 completion_queue_get; + u32 logical_port_entries; + u32 remote_node_entries; + u32 task_context_entries; + struct sci_unsolicited_frame_control uf_control; + + /* phy startup */ + struct sci_timer phy_timer; + /* XXX kill */ + bool phy_startup_timer_pending; + u32 next_phy_to_start; + /* XXX convert to unsigned long and use bitops */ + u8 invalid_phy_mask; + + /* TODO attempt dynamic interrupt coalescing scheme */ + u16 interrupt_coalesce_number; + u32 interrupt_coalesce_timeout; + struct smu_registers __iomem *smu_registers; + struct scu_registers __iomem *scu_registers; + + u16 tci_head; + u16 tci_tail; + u16 tci_pool[SCI_MAX_IO_REQUESTS]; + + int id; /* unique within a given pci device */ + struct isci_phy phys[SCI_MAX_PHYS]; + struct isci_port ports[SCI_MAX_PORTS + 1]; /* includes dummy port */ + struct sas_ha_struct sas_ha; + + spinlock_t state_lock; + struct pci_dev *pdev; + enum isci_status status; + #define IHOST_START_PENDING 0 + #define IHOST_STOP_PENDING 1 + unsigned long flags; + wait_queue_head_t eventq; + struct Scsi_Host *shost; + struct tasklet_struct completion_tasklet; + struct list_head requests_to_complete; + struct list_head requests_to_errorback; + spinlock_t scic_lock; + struct isci_request *reqs[SCI_MAX_IO_REQUESTS]; + struct isci_remote_device devices[SCI_MAX_REMOTE_DEVICES]; +}; + +/** + * enum sci_controller_states - This enumeration depicts all the states + * for the common controller state machine. + */ +enum sci_controller_states { + /** + * Simply the initial state for the base controller state machine. + */ + SCIC_INITIAL = 0, + + /** + * This state indicates that the controller is reset. The memory for + * the controller is in it's initial state, but the controller requires + * initialization. + * This state is entered from the INITIAL state. + * This state is entered from the RESETTING state. + */ + SCIC_RESET, + + /** + * This state is typically an action state that indicates the controller + * is in the process of initialization. In this state no new IO operations + * are permitted. + * This state is entered from the RESET state. + */ + SCIC_INITIALIZING, + + /** + * This state indicates that the controller has been successfully + * initialized. In this state no new IO operations are permitted. + * This state is entered from the INITIALIZING state. + */ + SCIC_INITIALIZED, + + /** + * This state indicates the the controller is in the process of becoming + * ready (i.e. starting). In this state no new IO operations are permitted. + * This state is entered from the INITIALIZED state. + */ + SCIC_STARTING, + + /** + * This state indicates the controller is now ready. Thus, the user + * is able to perform IO operations on the controller. + * This state is entered from the STARTING state. + */ + SCIC_READY, + + /** + * This state is typically an action state that indicates the controller + * is in the process of resetting. Thus, the user is unable to perform + * IO operations on the controller. A reset is considered destructive in + * most cases. + * This state is entered from the READY state. + * This state is entered from the FAILED state. + * This state is entered from the STOPPED state. + */ + SCIC_RESETTING, + + /** + * This state indicates that the controller is in the process of stopping. + * In this state no new IO operations are permitted, but existing IO + * operations are allowed to complete. + * This state is entered from the READY state. + */ + SCIC_STOPPING, + + /** + * This state indicates that the controller has successfully been stopped. + * In this state no new IO operations are permitted. + * This state is entered from the STOPPING state. + */ + SCIC_STOPPED, + + /** + * This state indicates that the controller could not successfully be + * initialized. In this state no new IO operations are permitted. + * This state is entered from the INITIALIZING state. + * This state is entered from the STARTING state. + * This state is entered from the STOPPING state. + * This state is entered from the RESETTING state. + */ + SCIC_FAILED, +}; + +/** + * struct isci_pci_info - This class represents the pci function containing the + * controllers. Depending on PCI SKU, there could be up to 2 controllers in + * the PCI function. + */ +#define SCI_MAX_MSIX_INT (SCI_NUM_MSI_X_INT*SCI_MAX_CONTROLLERS) + +struct isci_pci_info { + struct msix_entry msix_entries[SCI_MAX_MSIX_INT]; + struct isci_host *hosts[SCI_MAX_CONTROLLERS]; + struct isci_orom *orom; +}; + +static inline struct isci_pci_info *to_pci_info(struct pci_dev *pdev) +{ + return pci_get_drvdata(pdev); +} + +#define for_each_isci_host(id, ihost, pdev) \ + for (id = 0, ihost = to_pci_info(pdev)->hosts[id]; \ + id < ARRAY_SIZE(to_pci_info(pdev)->hosts) && ihost; \ + ihost = to_pci_info(pdev)->hosts[++id]) + +static inline enum isci_status isci_host_get_state(struct isci_host *isci_host) +{ + return isci_host->status; +} + +static inline void isci_host_change_state(struct isci_host *isci_host, + enum isci_status status) +{ + unsigned long flags; + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_host = %p, state = 0x%x", + __func__, + isci_host, + status); + spin_lock_irqsave(&isci_host->state_lock, flags); + isci_host->status = status; + spin_unlock_irqrestore(&isci_host->state_lock, flags); + +} + +static inline void wait_for_start(struct isci_host *ihost) +{ + wait_event(ihost->eventq, !test_bit(IHOST_START_PENDING, &ihost->flags)); +} + +static inline void wait_for_stop(struct isci_host *ihost) +{ + wait_event(ihost->eventq, !test_bit(IHOST_STOP_PENDING, &ihost->flags)); +} + +static inline void wait_for_device_start(struct isci_host *ihost, struct isci_remote_device *idev) +{ + wait_event(ihost->eventq, !test_bit(IDEV_START_PENDING, &idev->flags)); +} + +static inline void wait_for_device_stop(struct isci_host *ihost, struct isci_remote_device *idev) +{ + wait_event(ihost->eventq, !test_bit(IDEV_STOP_PENDING, &idev->flags)); +} + +static inline struct isci_host *dev_to_ihost(struct domain_device *dev) +{ + return dev->port->ha->lldd_ha; +} + +/* we always use protocol engine group zero */ +#define ISCI_PEG 0 + +/* see sci_controller_io_tag_allocate|free for how seq and tci are built */ +#define ISCI_TAG(seq, tci) (((u16) (seq)) << 12 | tci) + +/* these are returned by the hardware, so sanitize them */ +#define ISCI_TAG_SEQ(tag) (((tag) >> 12) & (SCI_MAX_SEQ-1)) +#define ISCI_TAG_TCI(tag) ((tag) & (SCI_MAX_IO_REQUESTS-1)) + +/* expander attached sata devices require 3 rnc slots */ +static inline int sci_remote_device_node_count(struct isci_remote_device *idev) +{ + struct domain_device *dev = idev->domain_dev; + + if ((dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) && + !idev->is_direct_attached) + return SCU_STP_REMOTE_NODE_COUNT; + return SCU_SSP_REMOTE_NODE_COUNT; +} + +/** + * sci_controller_clear_invalid_phy() - + * + * This macro will clear the bit in the invalid phy mask for this controller + * object. This is used to control messages reported for invalid link up + * notifications. + */ +#define sci_controller_clear_invalid_phy(controller, phy) \ + ((controller)->invalid_phy_mask &= ~(1 << (phy)->phy_index)) + +static inline struct device *sciphy_to_dev(struct isci_phy *iphy) +{ + + if (!iphy || !iphy->isci_port || !iphy->isci_port->isci_host) + return NULL; + + return &iphy->isci_port->isci_host->pdev->dev; +} + +static inline struct device *sciport_to_dev(struct isci_port *iport) +{ + + if (!iport || !iport->isci_host) + return NULL; + + return &iport->isci_host->pdev->dev; +} + +static inline struct device *scirdev_to_dev(struct isci_remote_device *idev) +{ + if (!idev || !idev->isci_port || !idev->isci_port->isci_host) + return NULL; + + return &idev->isci_port->isci_host->pdev->dev; +} + +static inline bool is_a2(struct pci_dev *pdev) +{ + if (pdev->revision < 4) + return true; + return false; +} + +static inline bool is_b0(struct pci_dev *pdev) +{ + if (pdev->revision == 4) + return true; + return false; +} + +static inline bool is_c0(struct pci_dev *pdev) +{ + if (pdev->revision >= 5) + return true; + return false; +} + +void sci_controller_post_request(struct isci_host *ihost, + u32 request); +void sci_controller_release_frame(struct isci_host *ihost, + u32 frame_index); +void sci_controller_copy_sata_response(void *response_buffer, + void *frame_header, + void *frame_buffer); +enum sci_status sci_controller_allocate_remote_node_context(struct isci_host *ihost, + struct isci_remote_device *idev, + u16 *node_id); +void sci_controller_free_remote_node_context( + struct isci_host *ihost, + struct isci_remote_device *idev, + u16 node_id); + +struct isci_request *sci_request_by_tag(struct isci_host *ihost, + u16 io_tag); + +void sci_controller_power_control_queue_insert( + struct isci_host *ihost, + struct isci_phy *iphy); + +void sci_controller_power_control_queue_remove( + struct isci_host *ihost, + struct isci_phy *iphy); + +void sci_controller_link_up( + struct isci_host *ihost, + struct isci_port *iport, + struct isci_phy *iphy); + +void sci_controller_link_down( + struct isci_host *ihost, + struct isci_port *iport, + struct isci_phy *iphy); + +void sci_controller_remote_device_stopped( + struct isci_host *ihost, + struct isci_remote_device *idev); + +void sci_controller_copy_task_context( + struct isci_host *ihost, + struct isci_request *ireq); + +void sci_controller_register_setup(struct isci_host *ihost); + +enum sci_status sci_controller_continue_io(struct isci_request *ireq); +int isci_host_scan_finished(struct Scsi_Host *, unsigned long); +void isci_host_scan_start(struct Scsi_Host *); +u16 isci_alloc_tag(struct isci_host *ihost); +enum sci_status isci_free_tag(struct isci_host *ihost, u16 io_tag); +void isci_tci_free(struct isci_host *ihost, u16 tci); + +int isci_host_init(struct isci_host *); + +void isci_host_init_controller_names( + struct isci_host *isci_host, + unsigned int controller_idx); + +void isci_host_deinit( + struct isci_host *); + +void isci_host_port_link_up( + struct isci_host *, + struct isci_port *, + struct isci_phy *); +int isci_host_dev_found(struct domain_device *); + +void isci_host_remote_device_start_complete( + struct isci_host *, + struct isci_remote_device *, + enum sci_status); + +void sci_controller_disable_interrupts( + struct isci_host *ihost); + +enum sci_status sci_controller_start_io( + struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq); + +enum sci_task_status sci_controller_start_task( + struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq); + +enum sci_status sci_controller_terminate_request( + struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq); + +enum sci_status sci_controller_complete_io( + struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq); + +void sci_port_configuration_agent_construct( + struct sci_port_configuration_agent *port_agent); + +enum sci_status sci_port_configuration_agent_initialize( + struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent); +#endif diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c new file mode 100644 index 000000000000..61e0d09e2b57 --- /dev/null +++ b/drivers/scsi/isci/init.c @@ -0,0 +1,565 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/firmware.h> +#include <linux/efi.h> +#include <asm/string.h> +#include "isci.h" +#include "task.h" +#include "probe_roms.h" + +static struct scsi_transport_template *isci_transport_template; + +static DEFINE_PCI_DEVICE_TABLE(isci_id_table) = { + { PCI_VDEVICE(INTEL, 0x1D61),}, + { PCI_VDEVICE(INTEL, 0x1D63),}, + { PCI_VDEVICE(INTEL, 0x1D65),}, + { PCI_VDEVICE(INTEL, 0x1D67),}, + { PCI_VDEVICE(INTEL, 0x1D69),}, + { PCI_VDEVICE(INTEL, 0x1D6B),}, + { PCI_VDEVICE(INTEL, 0x1D60),}, + { PCI_VDEVICE(INTEL, 0x1D62),}, + { PCI_VDEVICE(INTEL, 0x1D64),}, + { PCI_VDEVICE(INTEL, 0x1D66),}, + { PCI_VDEVICE(INTEL, 0x1D68),}, + { PCI_VDEVICE(INTEL, 0x1D6A),}, + {} +}; + +MODULE_DEVICE_TABLE(pci, isci_id_table); + +/* linux isci specific settings */ + +unsigned char no_outbound_task_to = 20; +module_param(no_outbound_task_to, byte, 0); +MODULE_PARM_DESC(no_outbound_task_to, "No Outbound Task Timeout (1us incr)"); + +u16 ssp_max_occ_to = 20; +module_param(ssp_max_occ_to, ushort, 0); +MODULE_PARM_DESC(ssp_max_occ_to, "SSP Max occupancy timeout (100us incr)"); + +u16 stp_max_occ_to = 5; +module_param(stp_max_occ_to, ushort, 0); +MODULE_PARM_DESC(stp_max_occ_to, "STP Max occupancy timeout (100us incr)"); + +u16 ssp_inactive_to = 5; +module_param(ssp_inactive_to, ushort, 0); +MODULE_PARM_DESC(ssp_inactive_to, "SSP inactivity timeout (100us incr)"); + +u16 stp_inactive_to = 5; +module_param(stp_inactive_to, ushort, 0); +MODULE_PARM_DESC(stp_inactive_to, "STP inactivity timeout (100us incr)"); + +unsigned char phy_gen = 3; +module_param(phy_gen, byte, 0); +MODULE_PARM_DESC(phy_gen, "PHY generation (1: 1.5Gbps 2: 3.0Gbps 3: 6.0Gbps)"); + +unsigned char max_concurr_spinup = 1; +module_param(max_concurr_spinup, byte, 0); +MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup"); + +static struct scsi_host_template isci_sht = { + + .module = THIS_MODULE, + .name = DRV_NAME, + .proc_name = DRV_NAME, + .queuecommand = sas_queuecommand, + .target_alloc = sas_target_alloc, + .slave_configure = sas_slave_configure, + .slave_destroy = sas_slave_destroy, + .scan_finished = isci_host_scan_finished, + .scan_start = isci_host_scan_start, + .change_queue_depth = sas_change_queue_depth, + .change_queue_type = sas_change_queue_type, + .bios_param = sas_bios_param, + .can_queue = ISCI_CAN_QUEUE_VAL, + .cmd_per_lun = 1, + .this_id = -1, + .sg_tablesize = SG_ALL, + .max_sectors = SCSI_DEFAULT_MAX_SECTORS, + .use_clustering = ENABLE_CLUSTERING, + .eh_device_reset_handler = sas_eh_device_reset_handler, + .eh_bus_reset_handler = isci_bus_reset_handler, + .slave_alloc = sas_slave_alloc, + .target_destroy = sas_target_destroy, + .ioctl = sas_ioctl, +}; + +static struct sas_domain_function_template isci_transport_ops = { + + /* The class calls these to notify the LLDD of an event. */ + .lldd_port_formed = isci_port_formed, + .lldd_port_deformed = isci_port_deformed, + + /* The class calls these when a device is found or gone. */ + .lldd_dev_found = isci_remote_device_found, + .lldd_dev_gone = isci_remote_device_gone, + + .lldd_execute_task = isci_task_execute_task, + /* Task Management Functions. Must be called from process context. */ + .lldd_abort_task = isci_task_abort_task, + .lldd_abort_task_set = isci_task_abort_task_set, + .lldd_clear_aca = isci_task_clear_aca, + .lldd_clear_task_set = isci_task_clear_task_set, + .lldd_I_T_nexus_reset = isci_task_I_T_nexus_reset, + .lldd_lu_reset = isci_task_lu_reset, + .lldd_query_task = isci_task_query_task, + + /* Port and Adapter management */ + .lldd_clear_nexus_port = isci_task_clear_nexus_port, + .lldd_clear_nexus_ha = isci_task_clear_nexus_ha, + + /* Phy management */ + .lldd_control_phy = isci_phy_control, +}; + + +/****************************************************************************** +* P R O T E C T E D M E T H O D S +******************************************************************************/ + + + +/** + * isci_register_sas_ha() - This method initializes various lldd + * specific members of the sas_ha struct and calls the libsas + * sas_register_ha() function. + * @isci_host: This parameter specifies the lldd specific wrapper for the + * libsas sas_ha struct. + * + * This method returns an error code indicating sucess or failure. The user + * should check for possible memory allocation error return otherwise, a zero + * indicates success. + */ +static int isci_register_sas_ha(struct isci_host *isci_host) +{ + int i; + struct sas_ha_struct *sas_ha = &(isci_host->sas_ha); + struct asd_sas_phy **sas_phys; + struct asd_sas_port **sas_ports; + + sas_phys = devm_kzalloc(&isci_host->pdev->dev, + SCI_MAX_PHYS * sizeof(void *), + GFP_KERNEL); + if (!sas_phys) + return -ENOMEM; + + sas_ports = devm_kzalloc(&isci_host->pdev->dev, + SCI_MAX_PORTS * sizeof(void *), + GFP_KERNEL); + if (!sas_ports) + return -ENOMEM; + + /*----------------- Libsas Initialization Stuff---------------------- + * Set various fields in the sas_ha struct: + */ + + sas_ha->sas_ha_name = DRV_NAME; + sas_ha->lldd_module = THIS_MODULE; + sas_ha->sas_addr = &isci_host->phys[0].sas_addr[0]; + + /* set the array of phy and port structs. */ + for (i = 0; i < SCI_MAX_PHYS; i++) { + sas_phys[i] = &isci_host->phys[i].sas_phy; + sas_ports[i] = &isci_host->ports[i].sas_port; + } + + sas_ha->sas_phy = sas_phys; + sas_ha->sas_port = sas_ports; + sas_ha->num_phys = SCI_MAX_PHYS; + + sas_ha->lldd_queue_size = ISCI_CAN_QUEUE_VAL; + sas_ha->lldd_max_execute_num = 1; + sas_ha->strict_wide_ports = 1; + + sas_register_ha(sas_ha); + + return 0; +} + +static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev); + struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); + struct isci_host *ihost = container_of(sas_ha, typeof(*ihost), sas_ha); + + return snprintf(buf, PAGE_SIZE, "%d\n", ihost->id); +} + +static DEVICE_ATTR(isci_id, S_IRUGO, isci_show_id, NULL); + +static void isci_unregister(struct isci_host *isci_host) +{ + struct Scsi_Host *shost; + + if (!isci_host) + return; + + shost = isci_host->shost; + device_remove_file(&shost->shost_dev, &dev_attr_isci_id); + + sas_unregister_ha(&isci_host->sas_ha); + + sas_remove_host(isci_host->shost); + scsi_remove_host(isci_host->shost); + scsi_host_put(isci_host->shost); +} + +static int __devinit isci_pci_init(struct pci_dev *pdev) +{ + int err, bar_num, bar_mask = 0; + void __iomem * const *iomap; + + err = pcim_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, + "failed enable PCI device %s!\n", + pci_name(pdev)); + return err; + } + + for (bar_num = 0; bar_num < SCI_PCI_BAR_COUNT; bar_num++) + bar_mask |= 1 << (bar_num * 2); + + err = pcim_iomap_regions(pdev, bar_mask, DRV_NAME); + if (err) + return err; + + iomap = pcim_iomap_table(pdev); + if (!iomap) + return -ENOMEM; + + pci_set_master(pdev); + + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)); + if (err) { + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (err) + return err; + } + + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); + if (err) { + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + if (err) + return err; + } + + return 0; +} + +static int num_controllers(struct pci_dev *pdev) +{ + /* bar size alone can tell us if we are running with a dual controller + * part, no need to trust revision ids that might be under broken firmware + * control + */ + resource_size_t scu_bar_size = pci_resource_len(pdev, SCI_SCU_BAR*2); + resource_size_t smu_bar_size = pci_resource_len(pdev, SCI_SMU_BAR*2); + + if (scu_bar_size >= SCI_SCU_BAR_SIZE*SCI_MAX_CONTROLLERS && + smu_bar_size >= SCI_SMU_BAR_SIZE*SCI_MAX_CONTROLLERS) + return SCI_MAX_CONTROLLERS; + else + return 1; +} + +static int isci_setup_interrupts(struct pci_dev *pdev) +{ + int err, i, num_msix; + struct isci_host *ihost; + struct isci_pci_info *pci_info = to_pci_info(pdev); + + /* + * Determine the number of vectors associated with this + * PCI function. + */ + num_msix = num_controllers(pdev) * SCI_NUM_MSI_X_INT; + + for (i = 0; i < num_msix; i++) + pci_info->msix_entries[i].entry = i; + + err = pci_enable_msix(pdev, pci_info->msix_entries, num_msix); + if (err) + goto intx; + + for (i = 0; i < num_msix; i++) { + int id = i / SCI_NUM_MSI_X_INT; + struct msix_entry *msix = &pci_info->msix_entries[i]; + irq_handler_t isr; + + ihost = pci_info->hosts[id]; + /* odd numbered vectors are error interrupts */ + if (i & 1) + isr = isci_error_isr; + else + isr = isci_msix_isr; + + err = devm_request_irq(&pdev->dev, msix->vector, isr, 0, + DRV_NAME"-msix", ihost); + if (!err) + continue; + + dev_info(&pdev->dev, "msix setup failed falling back to intx\n"); + while (i--) { + id = i / SCI_NUM_MSI_X_INT; + ihost = pci_info->hosts[id]; + msix = &pci_info->msix_entries[i]; + devm_free_irq(&pdev->dev, msix->vector, ihost); + } + pci_disable_msix(pdev); + goto intx; + } + return 0; + + intx: + for_each_isci_host(i, ihost, pdev) { + err = devm_request_irq(&pdev->dev, pdev->irq, isci_intx_isr, + IRQF_SHARED, DRV_NAME"-intx", ihost); + if (err) + break; + } + return err; +} + +static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id) +{ + struct isci_host *isci_host; + struct Scsi_Host *shost; + int err; + + isci_host = devm_kzalloc(&pdev->dev, sizeof(*isci_host), GFP_KERNEL); + if (!isci_host) + return NULL; + + isci_host->pdev = pdev; + isci_host->id = id; + + shost = scsi_host_alloc(&isci_sht, sizeof(void *)); + if (!shost) + return NULL; + isci_host->shost = shost; + + err = isci_host_init(isci_host); + if (err) + goto err_shost; + + SHOST_TO_SAS_HA(shost) = &isci_host->sas_ha; + isci_host->sas_ha.core.shost = shost; + shost->transportt = isci_transport_template; + + shost->max_id = ~0; + shost->max_lun = ~0; + shost->max_cmd_len = MAX_COMMAND_SIZE; + + err = scsi_add_host(shost, &pdev->dev); + if (err) + goto err_shost; + + err = isci_register_sas_ha(isci_host); + if (err) + goto err_shost_remove; + + err = device_create_file(&shost->shost_dev, &dev_attr_isci_id); + if (err) + goto err_unregister_ha; + + return isci_host; + + err_unregister_ha: + sas_unregister_ha(&(isci_host->sas_ha)); + err_shost_remove: + scsi_remove_host(shost); + err_shost: + scsi_host_put(shost); + + return NULL; +} + +static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct isci_pci_info *pci_info; + int err, i; + struct isci_host *isci_host; + const struct firmware *fw = NULL; + struct isci_orom *orom = NULL; + char *source = "(platform)"; + + dev_info(&pdev->dev, "driver configured for rev: %d silicon\n", + pdev->revision); + + pci_info = devm_kzalloc(&pdev->dev, sizeof(*pci_info), GFP_KERNEL); + if (!pci_info) + return -ENOMEM; + pci_set_drvdata(pdev, pci_info); + + if (efi_enabled) + orom = isci_get_efi_var(pdev); + + if (!orom) + orom = isci_request_oprom(pdev); + + for (i = 0; orom && i < ARRAY_SIZE(orom->ctrl); i++) { + if (sci_oem_parameters_validate(&orom->ctrl[i])) { + dev_warn(&pdev->dev, + "[%d]: invalid oem parameters detected, falling back to firmware\n", i); + devm_kfree(&pdev->dev, orom); + orom = NULL; + break; + } + } + + if (!orom) { + source = "(firmware)"; + orom = isci_request_firmware(pdev, fw); + if (!orom) { + /* TODO convert this to WARN_TAINT_ONCE once the + * orom/efi parameter support is widely available + */ + dev_warn(&pdev->dev, + "Loading user firmware failed, using default " + "values\n"); + dev_warn(&pdev->dev, + "Default OEM configuration being used: 4 " + "narrow ports, and default SAS Addresses\n"); + } + } + + if (orom) + dev_info(&pdev->dev, + "OEM SAS parameters (version: %u.%u) loaded %s\n", + (orom->hdr.version & 0xf0) >> 4, + (orom->hdr.version & 0xf), source); + + pci_info->orom = orom; + + err = isci_pci_init(pdev); + if (err) + return err; + + for (i = 0; i < num_controllers(pdev); i++) { + struct isci_host *h = isci_host_alloc(pdev, i); + + if (!h) { + err = -ENOMEM; + goto err_host_alloc; + } + pci_info->hosts[i] = h; + } + + err = isci_setup_interrupts(pdev); + if (err) + goto err_host_alloc; + + for_each_isci_host(i, isci_host, pdev) + scsi_scan_host(isci_host->shost); + + return 0; + + err_host_alloc: + for_each_isci_host(i, isci_host, pdev) + isci_unregister(isci_host); + return err; +} + +static void __devexit isci_pci_remove(struct pci_dev *pdev) +{ + struct isci_host *ihost; + int i; + + for_each_isci_host(i, ihost, pdev) { + isci_unregister(ihost); + isci_host_deinit(ihost); + sci_controller_disable_interrupts(ihost); + } +} + +static struct pci_driver isci_pci_driver = { + .name = DRV_NAME, + .id_table = isci_id_table, + .probe = isci_pci_probe, + .remove = __devexit_p(isci_pci_remove), +}; + +static __init int isci_init(void) +{ + int err; + + pr_info("%s: Intel(R) C600 SAS Controller Driver\n", DRV_NAME); + + isci_transport_template = sas_domain_attach_transport(&isci_transport_ops); + if (!isci_transport_template) + return -ENOMEM; + + err = pci_register_driver(&isci_pci_driver); + if (err) + sas_release_transport(isci_transport_template); + + return err; +} + +static __exit void isci_exit(void) +{ + pci_unregister_driver(&isci_pci_driver); + sas_release_transport(isci_transport_template); +} + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_FIRMWARE(ISCI_FW_NAME); +module_init(isci_init); +module_exit(isci_exit); diff --git a/drivers/scsi/isci/isci.h b/drivers/scsi/isci/isci.h new file mode 100644 index 000000000000..d1de63312e7f --- /dev/null +++ b/drivers/scsi/isci/isci.h @@ -0,0 +1,538 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __ISCI_H__ +#define __ISCI_H__ + +#include <linux/interrupt.h> +#include <linux/types.h> + +#define DRV_NAME "isci" +#define SCI_PCI_BAR_COUNT 2 +#define SCI_NUM_MSI_X_INT 2 +#define SCI_SMU_BAR 0 +#define SCI_SMU_BAR_SIZE (16*1024) +#define SCI_SCU_BAR 1 +#define SCI_SCU_BAR_SIZE (4*1024*1024) +#define SCI_IO_SPACE_BAR0 2 +#define SCI_IO_SPACE_BAR1 3 +#define ISCI_CAN_QUEUE_VAL 250 /* < SCI_MAX_IO_REQUESTS ? */ +#define SCIC_CONTROLLER_STOP_TIMEOUT 5000 + +#define SCI_CONTROLLER_INVALID_IO_TAG 0xFFFF + +#define SCI_MAX_PHYS (4UL) +#define SCI_MAX_PORTS SCI_MAX_PHYS +#define SCI_MAX_SMP_PHYS (384) /* not silicon constrained */ +#define SCI_MAX_REMOTE_DEVICES (256UL) +#define SCI_MAX_IO_REQUESTS (256UL) +#define SCI_MAX_SEQ (16) +#define SCI_MAX_MSIX_MESSAGES (2) +#define SCI_MAX_SCATTER_GATHER_ELEMENTS 130 /* not silicon constrained */ +#define SCI_MAX_CONTROLLERS 2 +#define SCI_MAX_DOMAINS SCI_MAX_PORTS + +#define SCU_MAX_CRITICAL_NOTIFICATIONS (384) +#define SCU_MAX_EVENTS_SHIFT (7) +#define SCU_MAX_EVENTS (1 << SCU_MAX_EVENTS_SHIFT) +#define SCU_MAX_UNSOLICITED_FRAMES (128) +#define SCU_MAX_COMPLETION_QUEUE_SCRATCH (128) +#define SCU_MAX_COMPLETION_QUEUE_ENTRIES (SCU_MAX_CRITICAL_NOTIFICATIONS \ + + SCU_MAX_EVENTS \ + + SCU_MAX_UNSOLICITED_FRAMES \ + + SCI_MAX_IO_REQUESTS \ + + SCU_MAX_COMPLETION_QUEUE_SCRATCH) +#define SCU_MAX_COMPLETION_QUEUE_SHIFT (ilog2(SCU_MAX_COMPLETION_QUEUE_ENTRIES)) + +#define SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES (4096) +#define SCU_UNSOLICITED_FRAME_BUFFER_SIZE (1024) +#define SCU_INVALID_FRAME_INDEX (0xFFFF) + +#define SCU_IO_REQUEST_MAX_SGE_SIZE (0x00FFFFFF) +#define SCU_IO_REQUEST_MAX_TRANSFER_LENGTH (0x00FFFFFF) + +static inline void check_sizes(void) +{ + BUILD_BUG_ON_NOT_POWER_OF_2(SCU_MAX_EVENTS); + BUILD_BUG_ON(SCU_MAX_UNSOLICITED_FRAMES <= 8); + BUILD_BUG_ON_NOT_POWER_OF_2(SCU_MAX_UNSOLICITED_FRAMES); + BUILD_BUG_ON_NOT_POWER_OF_2(SCU_MAX_COMPLETION_QUEUE_ENTRIES); + BUILD_BUG_ON(SCU_MAX_UNSOLICITED_FRAMES > SCU_ABSOLUTE_MAX_UNSOLICITED_FRAMES); + BUILD_BUG_ON_NOT_POWER_OF_2(SCI_MAX_IO_REQUESTS); + BUILD_BUG_ON_NOT_POWER_OF_2(SCI_MAX_SEQ); +} + +/** + * enum sci_status - This is the general return status enumeration for non-IO, + * non-task management related SCI interface methods. + * + * + */ +enum sci_status { + /** + * This member indicates successful completion. + */ + SCI_SUCCESS = 0, + + /** + * This value indicates that the calling method completed successfully, + * but that the IO may have completed before having it's start method + * invoked. This occurs during SAT translation for requests that do + * not require an IO to the target or for any other requests that may + * be completed without having to submit IO. + */ + SCI_SUCCESS_IO_COMPLETE_BEFORE_START, + + /** + * This Value indicates that the SCU hardware returned an early response + * because the io request specified more data than is returned by the + * target device (mode pages, inquiry data, etc.). The completion routine + * will handle this case to get the actual number of bytes transferred. + */ + SCI_SUCCESS_IO_DONE_EARLY, + + /** + * This member indicates that the object for which a state change is + * being requested is already in said state. + */ + SCI_WARNING_ALREADY_IN_STATE, + + /** + * This member indicates interrupt coalescence timer may cause SAS + * specification compliance issues (i.e. SMP target mode response + * frames must be returned within 1.9 milliseconds). + */ + SCI_WARNING_TIMER_CONFLICT, + + /** + * This field indicates a sequence of action is not completed yet. Mostly, + * this status is used when multiple ATA commands are needed in a SATI translation. + */ + SCI_WARNING_SEQUENCE_INCOMPLETE, + + /** + * This member indicates that there was a general failure. + */ + SCI_FAILURE, + + /** + * This member indicates that the SCI implementation is unable to complete + * an operation due to a critical flaw the prevents any further operation + * (i.e. an invalid pointer). + */ + SCI_FATAL_ERROR, + + /** + * This member indicates the calling function failed, because the state + * of the controller is in a state that prevents successful completion. + */ + SCI_FAILURE_INVALID_STATE, + + /** + * This member indicates the calling function failed, because there is + * insufficient resources/memory to complete the request. + */ + SCI_FAILURE_INSUFFICIENT_RESOURCES, + + /** + * This member indicates the calling function failed, because the + * controller object required for the operation can't be located. + */ + SCI_FAILURE_CONTROLLER_NOT_FOUND, + + /** + * This member indicates the calling function failed, because the + * discovered controller type is not supported by the library. + */ + SCI_FAILURE_UNSUPPORTED_CONTROLLER_TYPE, + + /** + * This member indicates the calling function failed, because the + * requested initialization data version isn't supported. + */ + SCI_FAILURE_UNSUPPORTED_INIT_DATA_VERSION, + + /** + * This member indicates the calling function failed, because the + * requested configuration of SAS Phys into SAS Ports is not supported. + */ + SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION, + + /** + * This member indicates the calling function failed, because the + * requested protocol is not supported by the remote device, port, + * or controller. + */ + SCI_FAILURE_UNSUPPORTED_PROTOCOL, + + /** + * This member indicates the calling function failed, because the + * requested information type is not supported by the SCI implementation. + */ + SCI_FAILURE_UNSUPPORTED_INFORMATION_TYPE, + + /** + * This member indicates the calling function failed, because the + * device already exists. + */ + SCI_FAILURE_DEVICE_EXISTS, + + /** + * This member indicates the calling function failed, because adding + * a phy to the object is not possible. + */ + SCI_FAILURE_ADDING_PHY_UNSUPPORTED, + + /** + * This member indicates the calling function failed, because the + * requested information type is not supported by the SCI implementation. + */ + SCI_FAILURE_UNSUPPORTED_INFORMATION_FIELD, + + /** + * This member indicates the calling function failed, because the SCI + * implementation does not support the supplied time limit. + */ + SCI_FAILURE_UNSUPPORTED_TIME_LIMIT, + + /** + * This member indicates the calling method failed, because the SCI + * implementation does not contain the specified Phy. + */ + SCI_FAILURE_INVALID_PHY, + + /** + * This member indicates the calling method failed, because the SCI + * implementation does not contain the specified Port. + */ + SCI_FAILURE_INVALID_PORT, + + /** + * This member indicates the calling method was partly successful + * The port was reset but not all phys in port are operational + */ + SCI_FAILURE_RESET_PORT_PARTIAL_SUCCESS, + + /** + * This member indicates that calling method failed + * The port reset did not complete because none of the phys are operational + */ + SCI_FAILURE_RESET_PORT_FAILURE, + + /** + * This member indicates the calling method failed, because the SCI + * implementation does not contain the specified remote device. + */ + SCI_FAILURE_INVALID_REMOTE_DEVICE, + + /** + * This member indicates the calling method failed, because the remote + * device is in a bad state and requires a reset. + */ + SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED, + + /** + * This member indicates the calling method failed, because the SCI + * implementation does not contain or support the specified IO tag. + */ + SCI_FAILURE_INVALID_IO_TAG, + + /** + * This member indicates that the operation failed and the user should + * check the response data associated with the IO. + */ + SCI_FAILURE_IO_RESPONSE_VALID, + + /** + * This member indicates that the operation failed, the failure is + * controller implementation specific, and the response data associated + * with the request is not valid. You can query for the controller + * specific error information via sci_controller_get_request_status() + */ + SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR, + + /** + * This member indicated that the operation failed because the + * user requested this IO to be terminated. + */ + SCI_FAILURE_IO_TERMINATED, + + /** + * This member indicates that the operation failed and the associated + * request requires a SCSI abort task to be sent to the target. + */ + SCI_FAILURE_IO_REQUIRES_SCSI_ABORT, + + /** + * This member indicates that the operation failed because the supplied + * device could not be located. + */ + SCI_FAILURE_DEVICE_NOT_FOUND, + + /** + * This member indicates that the operation failed because the + * objects association is required and is not correctly set. + */ + SCI_FAILURE_INVALID_ASSOCIATION, + + /** + * This member indicates that the operation failed, because a timeout + * occurred. + */ + SCI_FAILURE_TIMEOUT, + + /** + * This member indicates that the operation failed, because the user + * specified a value that is either invalid or not supported. + */ + SCI_FAILURE_INVALID_PARAMETER_VALUE, + + /** + * This value indicates that the operation failed, because the number + * of messages (MSI-X) is not supported. + */ + SCI_FAILURE_UNSUPPORTED_MESSAGE_COUNT, + + /** + * This value indicates that the method failed due to a lack of + * available NCQ tags. + */ + SCI_FAILURE_NO_NCQ_TAG_AVAILABLE, + + /** + * This value indicates that a protocol violation has occurred on the + * link. + */ + SCI_FAILURE_PROTOCOL_VIOLATION, + + /** + * This value indicates a failure condition that retry may help to clear. + */ + SCI_FAILURE_RETRY_REQUIRED, + + /** + * This field indicates the retry limit was reached when a retry is attempted + */ + SCI_FAILURE_RETRY_LIMIT_REACHED, + + /** + * This member indicates the calling method was partly successful. + * Mostly, this status is used when a LUN_RESET issued to an expander attached + * STP device in READY NCQ substate needs to have RNC suspended/resumed + * before posting TC. + */ + SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS, + + /** + * This field indicates an illegal phy connection based on the routing attribute + * of both expander phy attached to each other. + */ + SCI_FAILURE_ILLEGAL_ROUTING_ATTRIBUTE_CONFIGURATION, + + /** + * This field indicates a CONFIG ROUTE INFO command has a response with function result + * INDEX DOES NOT EXIST, usually means exceeding max route index. + */ + SCI_FAILURE_EXCEED_MAX_ROUTE_INDEX, + + /** + * This value indicates that an unsupported PCI device ID has been + * specified. This indicates that attempts to invoke + * sci_library_allocate_controller() will fail. + */ + SCI_FAILURE_UNSUPPORTED_PCI_DEVICE_ID + +}; + +/** + * enum sci_io_status - This enumeration depicts all of the possible IO + * completion status values. Each value in this enumeration maps directly + * to a value in the enum sci_status enumeration. Please refer to that + * enumeration for detailed comments concerning what the status represents. + * + * Add the API to retrieve the SCU status from the core. Check to see that the + * following status are properly handled: - SCI_IO_FAILURE_UNSUPPORTED_PROTOCOL + * - SCI_IO_FAILURE_INVALID_IO_TAG + */ +enum sci_io_status { + SCI_IO_SUCCESS = SCI_SUCCESS, + SCI_IO_FAILURE = SCI_FAILURE, + SCI_IO_SUCCESS_COMPLETE_BEFORE_START = SCI_SUCCESS_IO_COMPLETE_BEFORE_START, + SCI_IO_SUCCESS_IO_DONE_EARLY = SCI_SUCCESS_IO_DONE_EARLY, + SCI_IO_FAILURE_INVALID_STATE = SCI_FAILURE_INVALID_STATE, + SCI_IO_FAILURE_INSUFFICIENT_RESOURCES = SCI_FAILURE_INSUFFICIENT_RESOURCES, + SCI_IO_FAILURE_UNSUPPORTED_PROTOCOL = SCI_FAILURE_UNSUPPORTED_PROTOCOL, + SCI_IO_FAILURE_RESPONSE_VALID = SCI_FAILURE_IO_RESPONSE_VALID, + SCI_IO_FAILURE_CONTROLLER_SPECIFIC_ERR = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR, + SCI_IO_FAILURE_TERMINATED = SCI_FAILURE_IO_TERMINATED, + SCI_IO_FAILURE_REQUIRES_SCSI_ABORT = SCI_FAILURE_IO_REQUIRES_SCSI_ABORT, + SCI_IO_FAILURE_INVALID_PARAMETER_VALUE = SCI_FAILURE_INVALID_PARAMETER_VALUE, + SCI_IO_FAILURE_NO_NCQ_TAG_AVAILABLE = SCI_FAILURE_NO_NCQ_TAG_AVAILABLE, + SCI_IO_FAILURE_PROTOCOL_VIOLATION = SCI_FAILURE_PROTOCOL_VIOLATION, + + SCI_IO_FAILURE_REMOTE_DEVICE_RESET_REQUIRED = SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED, + + SCI_IO_FAILURE_RETRY_REQUIRED = SCI_FAILURE_RETRY_REQUIRED, + SCI_IO_FAILURE_RETRY_LIMIT_REACHED = SCI_FAILURE_RETRY_LIMIT_REACHED, + SCI_IO_FAILURE_INVALID_REMOTE_DEVICE = SCI_FAILURE_INVALID_REMOTE_DEVICE +}; + +/** + * enum sci_task_status - This enumeration depicts all of the possible task + * completion status values. Each value in this enumeration maps directly + * to a value in the enum sci_status enumeration. Please refer to that + * enumeration for detailed comments concerning what the status represents. + * + * Check to see that the following status are properly handled: + */ +enum sci_task_status { + SCI_TASK_SUCCESS = SCI_SUCCESS, + SCI_TASK_FAILURE = SCI_FAILURE, + SCI_TASK_FAILURE_INVALID_STATE = SCI_FAILURE_INVALID_STATE, + SCI_TASK_FAILURE_INSUFFICIENT_RESOURCES = SCI_FAILURE_INSUFFICIENT_RESOURCES, + SCI_TASK_FAILURE_UNSUPPORTED_PROTOCOL = SCI_FAILURE_UNSUPPORTED_PROTOCOL, + SCI_TASK_FAILURE_INVALID_TAG = SCI_FAILURE_INVALID_IO_TAG, + SCI_TASK_FAILURE_RESPONSE_VALID = SCI_FAILURE_IO_RESPONSE_VALID, + SCI_TASK_FAILURE_CONTROLLER_SPECIFIC_ERR = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR, + SCI_TASK_FAILURE_TERMINATED = SCI_FAILURE_IO_TERMINATED, + SCI_TASK_FAILURE_INVALID_PARAMETER_VALUE = SCI_FAILURE_INVALID_PARAMETER_VALUE, + + SCI_TASK_FAILURE_REMOTE_DEVICE_RESET_REQUIRED = SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED, + SCI_TASK_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS = SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS + +}; + +/** + * sci_swab32_cpy - convert between scsi and scu-hardware byte format + * @dest: receive the 4-byte endian swapped version of src + * @src: word aligned source buffer + * + * scu hardware handles SSP/SMP control, response, and unidentified + * frames in "big endian dword" order. Regardless of host endian this + * is always a swab32()-per-dword conversion of the standard definition, + * i.e. single byte fields swapped and multi-byte fields in little- + * endian + */ +static inline void sci_swab32_cpy(void *_dest, void *_src, ssize_t word_cnt) +{ + u32 *dest = _dest, *src = _src; + + while (--word_cnt >= 0) + dest[word_cnt] = swab32(src[word_cnt]); +} + +extern unsigned char no_outbound_task_to; +extern u16 ssp_max_occ_to; +extern u16 stp_max_occ_to; +extern u16 ssp_inactive_to; +extern u16 stp_inactive_to; +extern unsigned char phy_gen; +extern unsigned char max_concurr_spinup; + +irqreturn_t isci_msix_isr(int vec, void *data); +irqreturn_t isci_intx_isr(int vec, void *data); +irqreturn_t isci_error_isr(int vec, void *data); + +/* + * Each timer is associated with a cancellation flag that is set when + * del_timer() is called and checked in the timer callback function. This + * is needed since del_timer_sync() cannot be called with sci_lock held. + * For deinit however, del_timer_sync() is used without holding the lock. + */ +struct sci_timer { + struct timer_list timer; + bool cancel; +}; + +static inline +void sci_init_timer(struct sci_timer *tmr, void (*fn)(unsigned long)) +{ + tmr->timer.function = fn; + tmr->timer.data = (unsigned long) tmr; + tmr->cancel = 0; + init_timer(&tmr->timer); +} + +static inline void sci_mod_timer(struct sci_timer *tmr, unsigned long msec) +{ + tmr->cancel = 0; + mod_timer(&tmr->timer, jiffies + msecs_to_jiffies(msec)); +} + +static inline void sci_del_timer(struct sci_timer *tmr) +{ + tmr->cancel = 1; + del_timer(&tmr->timer); +} + +struct sci_base_state_machine { + const struct sci_base_state *state_table; + u32 initial_state_id; + u32 current_state_id; + u32 previous_state_id; +}; + +typedef void (*sci_state_transition_t)(struct sci_base_state_machine *sm); + +struct sci_base_state { + sci_state_transition_t enter_state; /* Called on state entry */ + sci_state_transition_t exit_state; /* Called on state exit */ +}; + +extern void sci_init_sm(struct sci_base_state_machine *sm, + const struct sci_base_state *state_table, + u32 initial_state); +extern void sci_change_state(struct sci_base_state_machine *sm, u32 next_state); +#endif /* __ISCI_H__ */ diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c new file mode 100644 index 000000000000..79313a7a2356 --- /dev/null +++ b/drivers/scsi/isci/phy.c @@ -0,0 +1,1312 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "isci.h" +#include "host.h" +#include "phy.h" +#include "scu_event_codes.h" +#include "probe_roms.h" + +/* Maximum arbitration wait time in micro-seconds */ +#define SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME (700) + +enum sas_linkrate sci_phy_linkrate(struct isci_phy *iphy) +{ + return iphy->max_negotiated_speed; +} + +static enum sci_status +sci_phy_transport_layer_initialization(struct isci_phy *iphy, + struct scu_transport_layer_registers __iomem *reg) +{ + u32 tl_control; + + iphy->transport_layer_registers = reg; + + writel(SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX, + &iphy->transport_layer_registers->stp_rni); + + /* + * Hardware team recommends that we enable the STP prefetch for all + * transports + */ + tl_control = readl(&iphy->transport_layer_registers->control); + tl_control |= SCU_TLCR_GEN_BIT(STP_WRITE_DATA_PREFETCH); + writel(tl_control, &iphy->transport_layer_registers->control); + + return SCI_SUCCESS; +} + +static enum sci_status +sci_phy_link_layer_initialization(struct isci_phy *iphy, + struct scu_link_layer_registers __iomem *reg) +{ + struct isci_host *ihost = iphy->owning_port->owning_controller; + int phy_idx = iphy->phy_index; + struct sci_phy_user_params *phy_user = &ihost->user_parameters.phys[phy_idx]; + struct sci_phy_oem_params *phy_oem = + &ihost->oem_parameters.phys[phy_idx]; + u32 phy_configuration; + struct sci_phy_cap phy_cap; + u32 parity_check = 0; + u32 parity_count = 0; + u32 llctl, link_rate; + u32 clksm_value = 0; + + iphy->link_layer_registers = reg; + + /* Set our IDENTIFY frame data */ + #define SCI_END_DEVICE 0x01 + + writel(SCU_SAS_TIID_GEN_BIT(SMP_INITIATOR) | + SCU_SAS_TIID_GEN_BIT(SSP_INITIATOR) | + SCU_SAS_TIID_GEN_BIT(STP_INITIATOR) | + SCU_SAS_TIID_GEN_BIT(DA_SATA_HOST) | + SCU_SAS_TIID_GEN_VAL(DEVICE_TYPE, SCI_END_DEVICE), + &iphy->link_layer_registers->transmit_identification); + + /* Write the device SAS Address */ + writel(0xFEDCBA98, + &iphy->link_layer_registers->sas_device_name_high); + writel(phy_idx, &iphy->link_layer_registers->sas_device_name_low); + + /* Write the source SAS Address */ + writel(phy_oem->sas_address.high, + &iphy->link_layer_registers->source_sas_address_high); + writel(phy_oem->sas_address.low, + &iphy->link_layer_registers->source_sas_address_low); + + /* Clear and Set the PHY Identifier */ + writel(0, &iphy->link_layer_registers->identify_frame_phy_id); + writel(SCU_SAS_TIPID_GEN_VALUE(ID, phy_idx), + &iphy->link_layer_registers->identify_frame_phy_id); + + /* Change the initial state of the phy configuration register */ + phy_configuration = + readl(&iphy->link_layer_registers->phy_configuration); + + /* Hold OOB state machine in reset */ + phy_configuration |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET); + writel(phy_configuration, + &iphy->link_layer_registers->phy_configuration); + + /* Configure the SNW capabilities */ + phy_cap.all = 0; + phy_cap.start = 1; + phy_cap.gen3_no_ssc = 1; + phy_cap.gen2_no_ssc = 1; + phy_cap.gen1_no_ssc = 1; + if (ihost->oem_parameters.controller.do_enable_ssc == true) { + phy_cap.gen3_ssc = 1; + phy_cap.gen2_ssc = 1; + phy_cap.gen1_ssc = 1; + } + + /* + * The SAS specification indicates that the phy_capabilities that + * are transmitted shall have an even parity. Calculate the parity. */ + parity_check = phy_cap.all; + while (parity_check != 0) { + if (parity_check & 0x1) + parity_count++; + parity_check >>= 1; + } + + /* + * If parity indicates there are an odd number of bits set, then + * set the parity bit to 1 in the phy capabilities. */ + if ((parity_count % 2) != 0) + phy_cap.parity = 1; + + writel(phy_cap.all, &iphy->link_layer_registers->phy_capabilities); + + /* Set the enable spinup period but disable the ability to send + * notify enable spinup + */ + writel(SCU_ENSPINUP_GEN_VAL(COUNT, + phy_user->notify_enable_spin_up_insertion_frequency), + &iphy->link_layer_registers->notify_enable_spinup_control); + + /* Write the ALIGN Insertion Ferequency for connected phy and + * inpendent of connected state + */ + clksm_value = SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(CONNECTED, + phy_user->in_connection_align_insertion_frequency); + + clksm_value |= SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(GENERAL, + phy_user->align_insertion_frequency); + + writel(clksm_value, &iphy->link_layer_registers->clock_skew_management); + + /* @todo Provide a way to write this register correctly */ + writel(0x02108421, + &iphy->link_layer_registers->afe_lookup_table_control); + + llctl = SCU_SAS_LLCTL_GEN_VAL(NO_OUTBOUND_TASK_TIMEOUT, + (u8)ihost->user_parameters.no_outbound_task_timeout); + + switch (phy_user->max_speed_generation) { + case SCIC_SDS_PARM_GEN3_SPEED: + link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN3; + break; + case SCIC_SDS_PARM_GEN2_SPEED: + link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2; + break; + default: + link_rate = SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1; + break; + } + llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate); + writel(llctl, &iphy->link_layer_registers->link_layer_control); + + if (is_a2(ihost->pdev)) { + /* Program the max ARB time for the PHY to 700us so we inter-operate with + * the PMC expander which shuts down PHYs if the expander PHY generates too + * many breaks. This time value will guarantee that the initiator PHY will + * generate the break. + */ + writel(SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME, + &iphy->link_layer_registers->maximum_arbitration_wait_timer_timeout); + } + + /* Disable link layer hang detection, rely on the OS timeout for I/O timeouts. */ + writel(0, &iphy->link_layer_registers->link_layer_hang_detection_timeout); + + /* We can exit the initial state to the stopped state */ + sci_change_state(&iphy->sm, SCI_PHY_STOPPED); + + return SCI_SUCCESS; +} + +static void phy_sata_timeout(unsigned long data) +{ + struct sci_timer *tmr = (struct sci_timer *)data; + struct isci_phy *iphy = container_of(tmr, typeof(*iphy), sata_timer); + struct isci_host *ihost = iphy->owning_port->owning_controller; + unsigned long flags; + + spin_lock_irqsave(&ihost->scic_lock, flags); + + if (tmr->cancel) + goto done; + + dev_dbg(sciphy_to_dev(iphy), + "%s: SCIC SDS Phy 0x%p did not receive signature fis before " + "timeout.\n", + __func__, + iphy); + + sci_change_state(&iphy->sm, SCI_PHY_STARTING); +done: + spin_unlock_irqrestore(&ihost->scic_lock, flags); +} + +/** + * This method returns the port currently containing this phy. If the phy is + * currently contained by the dummy port, then the phy is considered to not + * be part of a port. + * @sci_phy: This parameter specifies the phy for which to retrieve the + * containing port. + * + * This method returns a handle to a port that contains the supplied phy. + * NULL This value is returned if the phy is not part of a real + * port (i.e. it's contained in the dummy port). !NULL All other + * values indicate a handle/pointer to the port containing the phy. + */ +struct isci_port *phy_get_non_dummy_port(struct isci_phy *iphy) +{ + struct isci_port *iport = iphy->owning_port; + + if (iport->physical_port_index == SCIC_SDS_DUMMY_PORT) + return NULL; + + return iphy->owning_port; +} + +/** + * This method will assign a port to the phy object. + * @out]: iphy This parameter specifies the phy for which to assign a port + * object. + * + * + */ +void sci_phy_set_port( + struct isci_phy *iphy, + struct isci_port *iport) +{ + iphy->owning_port = iport; + + if (iphy->bcn_received_while_port_unassigned) { + iphy->bcn_received_while_port_unassigned = false; + sci_port_broadcast_change_received(iphy->owning_port, iphy); + } +} + +enum sci_status sci_phy_initialize(struct isci_phy *iphy, + struct scu_transport_layer_registers __iomem *tl, + struct scu_link_layer_registers __iomem *ll) +{ + /* Perfrom the initialization of the TL hardware */ + sci_phy_transport_layer_initialization(iphy, tl); + + /* Perofrm the initialization of the PE hardware */ + sci_phy_link_layer_initialization(iphy, ll); + + /* There is nothing that needs to be done in this state just + * transition to the stopped state + */ + sci_change_state(&iphy->sm, SCI_PHY_STOPPED); + + return SCI_SUCCESS; +} + +/** + * This method assigns the direct attached device ID for this phy. + * + * @iphy The phy for which the direct attached device id is to + * be assigned. + * @device_id The direct attached device ID to assign to the phy. + * This will either be the RNi for the device or an invalid RNi if there + * is no current device assigned to the phy. + */ +void sci_phy_setup_transport(struct isci_phy *iphy, u32 device_id) +{ + u32 tl_control; + + writel(device_id, &iphy->transport_layer_registers->stp_rni); + + /* + * The read should guarantee that the first write gets posted + * before the next write + */ + tl_control = readl(&iphy->transport_layer_registers->control); + tl_control |= SCU_TLCR_GEN_BIT(CLEAR_TCI_NCQ_MAPPING_TABLE); + writel(tl_control, &iphy->transport_layer_registers->control); +} + +static void sci_phy_suspend(struct isci_phy *iphy) +{ + u32 scu_sas_pcfg_value; + + scu_sas_pcfg_value = + readl(&iphy->link_layer_registers->phy_configuration); + scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE); + writel(scu_sas_pcfg_value, + &iphy->link_layer_registers->phy_configuration); + + sci_phy_setup_transport(iphy, SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); +} + +void sci_phy_resume(struct isci_phy *iphy) +{ + u32 scu_sas_pcfg_value; + + scu_sas_pcfg_value = + readl(&iphy->link_layer_registers->phy_configuration); + scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE); + writel(scu_sas_pcfg_value, + &iphy->link_layer_registers->phy_configuration); +} + +void sci_phy_get_sas_address(struct isci_phy *iphy, struct sci_sas_address *sas) +{ + sas->high = readl(&iphy->link_layer_registers->source_sas_address_high); + sas->low = readl(&iphy->link_layer_registers->source_sas_address_low); +} + +void sci_phy_get_attached_sas_address(struct isci_phy *iphy, struct sci_sas_address *sas) +{ + struct sas_identify_frame *iaf; + + iaf = &iphy->frame_rcvd.iaf; + memcpy(sas, iaf->sas_addr, SAS_ADDR_SIZE); +} + +void sci_phy_get_protocols(struct isci_phy *iphy, struct sci_phy_proto *proto) +{ + proto->all = readl(&iphy->link_layer_registers->transmit_identification); +} + +enum sci_status sci_phy_start(struct isci_phy *iphy) +{ + enum sci_phy_states state = iphy->sm.current_state_id; + + if (state != SCI_PHY_STOPPED) { + dev_dbg(sciphy_to_dev(iphy), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + sci_change_state(&iphy->sm, SCI_PHY_STARTING); + return SCI_SUCCESS; +} + +enum sci_status sci_phy_stop(struct isci_phy *iphy) +{ + enum sci_phy_states state = iphy->sm.current_state_id; + + switch (state) { + case SCI_PHY_SUB_INITIAL: + case SCI_PHY_SUB_AWAIT_OSSP_EN: + case SCI_PHY_SUB_AWAIT_SAS_SPEED_EN: + case SCI_PHY_SUB_AWAIT_SAS_POWER: + case SCI_PHY_SUB_AWAIT_SATA_POWER: + case SCI_PHY_SUB_AWAIT_SATA_PHY_EN: + case SCI_PHY_SUB_AWAIT_SATA_SPEED_EN: + case SCI_PHY_SUB_AWAIT_SIG_FIS_UF: + case SCI_PHY_SUB_FINAL: + case SCI_PHY_READY: + break; + default: + dev_dbg(sciphy_to_dev(iphy), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + sci_change_state(&iphy->sm, SCI_PHY_STOPPED); + return SCI_SUCCESS; +} + +enum sci_status sci_phy_reset(struct isci_phy *iphy) +{ + enum sci_phy_states state = iphy->sm.current_state_id; + + if (state != SCI_PHY_READY) { + dev_dbg(sciphy_to_dev(iphy), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + sci_change_state(&iphy->sm, SCI_PHY_RESETTING); + return SCI_SUCCESS; +} + +enum sci_status sci_phy_consume_power_handler(struct isci_phy *iphy) +{ + enum sci_phy_states state = iphy->sm.current_state_id; + + switch (state) { + case SCI_PHY_SUB_AWAIT_SAS_POWER: { + u32 enable_spinup; + + enable_spinup = readl(&iphy->link_layer_registers->notify_enable_spinup_control); + enable_spinup |= SCU_ENSPINUP_GEN_BIT(ENABLE); + writel(enable_spinup, &iphy->link_layer_registers->notify_enable_spinup_control); + + /* Change state to the final state this substate machine has run to completion */ + sci_change_state(&iphy->sm, SCI_PHY_SUB_FINAL); + + return SCI_SUCCESS; + } + case SCI_PHY_SUB_AWAIT_SATA_POWER: { + u32 scu_sas_pcfg_value; + + /* Release the spinup hold state and reset the OOB state machine */ + scu_sas_pcfg_value = + readl(&iphy->link_layer_registers->phy_configuration); + scu_sas_pcfg_value &= + ~(SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD) | SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE)); + scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_RESET); + writel(scu_sas_pcfg_value, + &iphy->link_layer_registers->phy_configuration); + + /* Now restart the OOB operation */ + scu_sas_pcfg_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET); + scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); + writel(scu_sas_pcfg_value, + &iphy->link_layer_registers->phy_configuration); + + /* Change state to the final state this substate machine has run to completion */ + sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SATA_PHY_EN); + + return SCI_SUCCESS; + } + default: + dev_dbg(sciphy_to_dev(iphy), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } +} + +static void sci_phy_start_sas_link_training(struct isci_phy *iphy) +{ + /* continue the link training for the phy as if it were a SAS PHY + * instead of a SATA PHY. This is done because the completion queue had a SAS + * PHY DETECTED event when the state machine was expecting a SATA PHY event. + */ + u32 phy_control; + + phy_control = readl(&iphy->link_layer_registers->phy_configuration); + phy_control |= SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD); + writel(phy_control, + &iphy->link_layer_registers->phy_configuration); + + sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SAS_SPEED_EN); + + iphy->protocol = SCIC_SDS_PHY_PROTOCOL_SAS; +} + +static void sci_phy_start_sata_link_training(struct isci_phy *iphy) +{ + /* This method continues the link training for the phy as if it were a SATA PHY + * instead of a SAS PHY. This is done because the completion queue had a SATA + * SPINUP HOLD event when the state machine was expecting a SAS PHY event. none + */ + sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SATA_POWER); + + iphy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA; +} + +/** + * sci_phy_complete_link_training - perform processing common to + * all protocols upon completion of link training. + * @sci_phy: This parameter specifies the phy object for which link training + * has completed. + * @max_link_rate: This parameter specifies the maximum link rate to be + * associated with this phy. + * @next_state: This parameter specifies the next state for the phy's starting + * sub-state machine. + * + */ +static void sci_phy_complete_link_training(struct isci_phy *iphy, + enum sas_linkrate max_link_rate, + u32 next_state) +{ + iphy->max_negotiated_speed = max_link_rate; + + sci_change_state(&iphy->sm, next_state); +} + +enum sci_status sci_phy_event_handler(struct isci_phy *iphy, u32 event_code) +{ + enum sci_phy_states state = iphy->sm.current_state_id; + + switch (state) { + case SCI_PHY_SUB_AWAIT_OSSP_EN: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_SAS_PHY_DETECTED: + sci_phy_start_sas_link_training(iphy); + iphy->is_in_link_training = true; + break; + case SCU_EVENT_SATA_SPINUP_HOLD: + sci_phy_start_sata_link_training(iphy); + iphy->is_in_link_training = true; + break; + default: + dev_dbg(sciphy_to_dev(iphy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); + return SCI_FAILURE; + } + return SCI_SUCCESS; + case SCI_PHY_SUB_AWAIT_SAS_SPEED_EN: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_SAS_PHY_DETECTED: + /* + * Why is this being reported again by the controller? + * We would re-enter this state so just stay here */ + break; + case SCU_EVENT_SAS_15: + case SCU_EVENT_SAS_15_SSC: + sci_phy_complete_link_training(iphy, SAS_LINK_RATE_1_5_GBPS, + SCI_PHY_SUB_AWAIT_IAF_UF); + break; + case SCU_EVENT_SAS_30: + case SCU_EVENT_SAS_30_SSC: + sci_phy_complete_link_training(iphy, SAS_LINK_RATE_3_0_GBPS, + SCI_PHY_SUB_AWAIT_IAF_UF); + break; + case SCU_EVENT_SAS_60: + case SCU_EVENT_SAS_60_SSC: + sci_phy_complete_link_training(iphy, SAS_LINK_RATE_6_0_GBPS, + SCI_PHY_SUB_AWAIT_IAF_UF); + break; + case SCU_EVENT_SATA_SPINUP_HOLD: + /* + * We were doing SAS PHY link training and received a SATA PHY event + * continue OOB/SN as if this were a SATA PHY */ + sci_phy_start_sata_link_training(iphy); + break; + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + sci_change_state(&iphy->sm, SCI_PHY_STARTING); + break; + default: + dev_warn(sciphy_to_dev(iphy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, event_code); + + return SCI_FAILURE; + break; + } + return SCI_SUCCESS; + case SCI_PHY_SUB_AWAIT_IAF_UF: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_SAS_PHY_DETECTED: + /* Backup the state machine */ + sci_phy_start_sas_link_training(iphy); + break; + case SCU_EVENT_SATA_SPINUP_HOLD: + /* We were doing SAS PHY link training and received a + * SATA PHY event continue OOB/SN as if this were a + * SATA PHY + */ + sci_phy_start_sata_link_training(iphy); + break; + case SCU_EVENT_RECEIVED_IDENTIFY_TIMEOUT: + case SCU_EVENT_LINK_FAILURE: + case SCU_EVENT_HARD_RESET_RECEIVED: + /* Start the oob/sn state machine over again */ + sci_change_state(&iphy->sm, SCI_PHY_STARTING); + break; + default: + dev_warn(sciphy_to_dev(iphy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, event_code); + return SCI_FAILURE; + } + return SCI_SUCCESS; + case SCI_PHY_SUB_AWAIT_SAS_POWER: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + sci_change_state(&iphy->sm, SCI_PHY_STARTING); + break; + default: + dev_warn(sciphy_to_dev(iphy), + "%s: PHY starting substate machine received unexpected " + "event_code %x\n", + __func__, + event_code); + return SCI_FAILURE; + } + return SCI_SUCCESS; + case SCI_PHY_SUB_AWAIT_SATA_POWER: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + sci_change_state(&iphy->sm, SCI_PHY_STARTING); + break; + case SCU_EVENT_SATA_SPINUP_HOLD: + /* These events are received every 10ms and are + * expected while in this state + */ + break; + + case SCU_EVENT_SAS_PHY_DETECTED: + /* There has been a change in the phy type before OOB/SN for the + * SATA finished start down the SAS link traning path. + */ + sci_phy_start_sas_link_training(iphy); + break; + + default: + dev_warn(sciphy_to_dev(iphy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, event_code); + + return SCI_FAILURE; + } + return SCI_SUCCESS; + case SCI_PHY_SUB_AWAIT_SATA_PHY_EN: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + sci_change_state(&iphy->sm, SCI_PHY_STARTING); + break; + case SCU_EVENT_SATA_SPINUP_HOLD: + /* These events might be received since we dont know how many may be in + * the completion queue while waiting for power + */ + break; + case SCU_EVENT_SATA_PHY_DETECTED: + iphy->protocol = SCIC_SDS_PHY_PROTOCOL_SATA; + + /* We have received the SATA PHY notification change state */ + sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SATA_SPEED_EN); + break; + case SCU_EVENT_SAS_PHY_DETECTED: + /* There has been a change in the phy type before OOB/SN for the + * SATA finished start down the SAS link traning path. + */ + sci_phy_start_sas_link_training(iphy); + break; + default: + dev_warn(sciphy_to_dev(iphy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); + + return SCI_FAILURE;; + } + return SCI_SUCCESS; + case SCI_PHY_SUB_AWAIT_SATA_SPEED_EN: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_SATA_PHY_DETECTED: + /* + * The hardware reports multiple SATA PHY detected events + * ignore the extras */ + break; + case SCU_EVENT_SATA_15: + case SCU_EVENT_SATA_15_SSC: + sci_phy_complete_link_training(iphy, SAS_LINK_RATE_1_5_GBPS, + SCI_PHY_SUB_AWAIT_SIG_FIS_UF); + break; + case SCU_EVENT_SATA_30: + case SCU_EVENT_SATA_30_SSC: + sci_phy_complete_link_training(iphy, SAS_LINK_RATE_3_0_GBPS, + SCI_PHY_SUB_AWAIT_SIG_FIS_UF); + break; + case SCU_EVENT_SATA_60: + case SCU_EVENT_SATA_60_SSC: + sci_phy_complete_link_training(iphy, SAS_LINK_RATE_6_0_GBPS, + SCI_PHY_SUB_AWAIT_SIG_FIS_UF); + break; + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + sci_change_state(&iphy->sm, SCI_PHY_STARTING); + break; + case SCU_EVENT_SAS_PHY_DETECTED: + /* + * There has been a change in the phy type before OOB/SN for the + * SATA finished start down the SAS link traning path. */ + sci_phy_start_sas_link_training(iphy); + break; + default: + dev_warn(sciphy_to_dev(iphy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, event_code); + + return SCI_FAILURE; + } + + return SCI_SUCCESS; + case SCI_PHY_SUB_AWAIT_SIG_FIS_UF: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_SATA_PHY_DETECTED: + /* Backup the state machine */ + sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_SATA_SPEED_EN); + break; + + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + sci_change_state(&iphy->sm, SCI_PHY_STARTING); + break; + + default: + dev_warn(sciphy_to_dev(iphy), + "%s: PHY starting substate machine received " + "unexpected event_code %x\n", + __func__, + event_code); + + return SCI_FAILURE; + } + return SCI_SUCCESS; + case SCI_PHY_READY: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_LINK_FAILURE: + /* Link failure change state back to the starting state */ + sci_change_state(&iphy->sm, SCI_PHY_STARTING); + break; + case SCU_EVENT_BROADCAST_CHANGE: + /* Broadcast change received. Notify the port. */ + if (phy_get_non_dummy_port(iphy) != NULL) + sci_port_broadcast_change_received(iphy->owning_port, iphy); + else + iphy->bcn_received_while_port_unassigned = true; + break; + default: + dev_warn(sciphy_to_dev(iphy), + "%sP SCIC PHY 0x%p ready state machine received " + "unexpected event_code %x\n", + __func__, iphy, event_code); + return SCI_FAILURE_INVALID_STATE; + } + return SCI_SUCCESS; + case SCI_PHY_RESETTING: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_HARD_RESET_TRANSMITTED: + /* Link failure change state back to the starting state */ + sci_change_state(&iphy->sm, SCI_PHY_STARTING); + break; + default: + dev_warn(sciphy_to_dev(iphy), + "%s: SCIC PHY 0x%p resetting state machine received " + "unexpected event_code %x\n", + __func__, iphy, event_code); + + return SCI_FAILURE_INVALID_STATE; + break; + } + return SCI_SUCCESS; + default: + dev_dbg(sciphy_to_dev(iphy), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } +} + +enum sci_status sci_phy_frame_handler(struct isci_phy *iphy, u32 frame_index) +{ + enum sci_phy_states state = iphy->sm.current_state_id; + struct isci_host *ihost = iphy->owning_port->owning_controller; + enum sci_status result; + unsigned long flags; + + switch (state) { + case SCI_PHY_SUB_AWAIT_IAF_UF: { + u32 *frame_words; + struct sas_identify_frame iaf; + + result = sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + (void **)&frame_words); + + if (result != SCI_SUCCESS) + return result; + + sci_swab32_cpy(&iaf, frame_words, sizeof(iaf) / sizeof(u32)); + if (iaf.frame_type == 0) { + u32 state; + + spin_lock_irqsave(&iphy->sas_phy.frame_rcvd_lock, flags); + memcpy(&iphy->frame_rcvd.iaf, &iaf, sizeof(iaf)); + spin_unlock_irqrestore(&iphy->sas_phy.frame_rcvd_lock, flags); + if (iaf.smp_tport) { + /* We got the IAF for an expander PHY go to the final + * state since there are no power requirements for + * expander phys. + */ + state = SCI_PHY_SUB_FINAL; + } else { + /* We got the IAF we can now go to the await spinup + * semaphore state + */ + state = SCI_PHY_SUB_AWAIT_SAS_POWER; + } + sci_change_state(&iphy->sm, state); + result = SCI_SUCCESS; + } else + dev_warn(sciphy_to_dev(iphy), + "%s: PHY starting substate machine received " + "unexpected frame id %x\n", + __func__, frame_index); + + sci_controller_release_frame(ihost, frame_index); + return result; + } + case SCI_PHY_SUB_AWAIT_SIG_FIS_UF: { + struct dev_to_host_fis *frame_header; + u32 *fis_frame_data; + + result = sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + (void **)&frame_header); + + if (result != SCI_SUCCESS) + return result; + + if ((frame_header->fis_type == FIS_REGD2H) && + !(frame_header->status & ATA_BUSY)) { + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, + frame_index, + (void **)&fis_frame_data); + + spin_lock_irqsave(&iphy->sas_phy.frame_rcvd_lock, flags); + sci_controller_copy_sata_response(&iphy->frame_rcvd.fis, + frame_header, + fis_frame_data); + spin_unlock_irqrestore(&iphy->sas_phy.frame_rcvd_lock, flags); + + /* got IAF we can now go to the await spinup semaphore state */ + sci_change_state(&iphy->sm, SCI_PHY_SUB_FINAL); + + result = SCI_SUCCESS; + } else + dev_warn(sciphy_to_dev(iphy), + "%s: PHY starting substate machine received " + "unexpected frame id %x\n", + __func__, frame_index); + + /* Regardless of the result we are done with this frame with it */ + sci_controller_release_frame(ihost, frame_index); + + return result; + } + default: + dev_dbg(sciphy_to_dev(iphy), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + +} + +static void sci_phy_starting_initial_substate_enter(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + + /* This is just an temporary state go off to the starting state */ + sci_change_state(&iphy->sm, SCI_PHY_SUB_AWAIT_OSSP_EN); +} + +static void sci_phy_starting_await_sas_power_substate_enter(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + struct isci_host *ihost = iphy->owning_port->owning_controller; + + sci_controller_power_control_queue_insert(ihost, iphy); +} + +static void sci_phy_starting_await_sas_power_substate_exit(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + struct isci_host *ihost = iphy->owning_port->owning_controller; + + sci_controller_power_control_queue_remove(ihost, iphy); +} + +static void sci_phy_starting_await_sata_power_substate_enter(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + struct isci_host *ihost = iphy->owning_port->owning_controller; + + sci_controller_power_control_queue_insert(ihost, iphy); +} + +static void sci_phy_starting_await_sata_power_substate_exit(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + struct isci_host *ihost = iphy->owning_port->owning_controller; + + sci_controller_power_control_queue_remove(ihost, iphy); +} + +static void sci_phy_starting_await_sata_phy_substate_enter(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + + sci_mod_timer(&iphy->sata_timer, SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); +} + +static void sci_phy_starting_await_sata_phy_substate_exit(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + + sci_del_timer(&iphy->sata_timer); +} + +static void sci_phy_starting_await_sata_speed_substate_enter(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + + sci_mod_timer(&iphy->sata_timer, SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT); +} + +static void sci_phy_starting_await_sata_speed_substate_exit(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + + sci_del_timer(&iphy->sata_timer); +} + +static void sci_phy_starting_await_sig_fis_uf_substate_enter(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + + if (sci_port_link_detected(iphy->owning_port, iphy)) { + + /* + * Clear the PE suspend condition so we can actually + * receive SIG FIS + * The hardware will not respond to the XRDY until the PE + * suspend condition is cleared. + */ + sci_phy_resume(iphy); + + sci_mod_timer(&iphy->sata_timer, + SCIC_SDS_SIGNATURE_FIS_TIMEOUT); + } else + iphy->is_in_link_training = false; +} + +static void sci_phy_starting_await_sig_fis_uf_substate_exit(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + + sci_del_timer(&iphy->sata_timer); +} + +static void sci_phy_starting_final_substate_enter(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + + /* State machine has run to completion so exit out and change + * the base state machine to the ready state + */ + sci_change_state(&iphy->sm, SCI_PHY_READY); +} + +/** + * + * @sci_phy: This is the struct isci_phy object to stop. + * + * This method will stop the struct isci_phy object. This does not reset the + * protocol engine it just suspends it and places it in a state where it will + * not cause the end device to power up. none + */ +static void scu_link_layer_stop_protocol_engine( + struct isci_phy *iphy) +{ + u32 scu_sas_pcfg_value; + u32 enable_spinup_value; + + /* Suspend the protocol engine and place it in a sata spinup hold state */ + scu_sas_pcfg_value = + readl(&iphy->link_layer_registers->phy_configuration); + scu_sas_pcfg_value |= + (SCU_SAS_PCFG_GEN_BIT(OOB_RESET) | + SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE) | + SCU_SAS_PCFG_GEN_BIT(SATA_SPINUP_HOLD)); + writel(scu_sas_pcfg_value, + &iphy->link_layer_registers->phy_configuration); + + /* Disable the notify enable spinup primitives */ + enable_spinup_value = readl(&iphy->link_layer_registers->notify_enable_spinup_control); + enable_spinup_value &= ~SCU_ENSPINUP_GEN_BIT(ENABLE); + writel(enable_spinup_value, &iphy->link_layer_registers->notify_enable_spinup_control); +} + +/** + * + * + * This method will start the OOB/SN state machine for this struct isci_phy object. + */ +static void scu_link_layer_start_oob( + struct isci_phy *iphy) +{ + u32 scu_sas_pcfg_value; + + scu_sas_pcfg_value = + readl(&iphy->link_layer_registers->phy_configuration); + scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); + scu_sas_pcfg_value &= + ~(SCU_SAS_PCFG_GEN_BIT(OOB_RESET) | + SCU_SAS_PCFG_GEN_BIT(HARD_RESET)); + writel(scu_sas_pcfg_value, + &iphy->link_layer_registers->phy_configuration); +} + +/** + * + * + * This method will transmit a hard reset request on the specified phy. The SCU + * hardware requires that we reset the OOB state machine and set the hard reset + * bit in the phy configuration register. We then must start OOB over with the + * hard reset bit set. + */ +static void scu_link_layer_tx_hard_reset( + struct isci_phy *iphy) +{ + u32 phy_configuration_value; + + /* + * SAS Phys must wait for the HARD_RESET_TX event notification to transition + * to the starting state. */ + phy_configuration_value = + readl(&iphy->link_layer_registers->phy_configuration); + phy_configuration_value |= + (SCU_SAS_PCFG_GEN_BIT(HARD_RESET) | + SCU_SAS_PCFG_GEN_BIT(OOB_RESET)); + writel(phy_configuration_value, + &iphy->link_layer_registers->phy_configuration); + + /* Now take the OOB state machine out of reset */ + phy_configuration_value |= SCU_SAS_PCFG_GEN_BIT(OOB_ENABLE); + phy_configuration_value &= ~SCU_SAS_PCFG_GEN_BIT(OOB_RESET); + writel(phy_configuration_value, + &iphy->link_layer_registers->phy_configuration); +} + +static void sci_phy_stopped_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + struct isci_port *iport = iphy->owning_port; + struct isci_host *ihost = iport->owning_controller; + + /* + * @todo We need to get to the controller to place this PE in a + * reset state + */ + sci_del_timer(&iphy->sata_timer); + + scu_link_layer_stop_protocol_engine(iphy); + + if (iphy->sm.previous_state_id != SCI_PHY_INITIAL) + sci_controller_link_down(ihost, phy_get_non_dummy_port(iphy), iphy); +} + +static void sci_phy_starting_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + struct isci_port *iport = iphy->owning_port; + struct isci_host *ihost = iport->owning_controller; + + scu_link_layer_stop_protocol_engine(iphy); + scu_link_layer_start_oob(iphy); + + /* We don't know what kind of phy we are going to be just yet */ + iphy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; + iphy->bcn_received_while_port_unassigned = false; + + if (iphy->sm.previous_state_id == SCI_PHY_READY) + sci_controller_link_down(ihost, phy_get_non_dummy_port(iphy), iphy); + + sci_change_state(&iphy->sm, SCI_PHY_SUB_INITIAL); +} + +static void sci_phy_ready_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + struct isci_port *iport = iphy->owning_port; + struct isci_host *ihost = iport->owning_controller; + + sci_controller_link_up(ihost, phy_get_non_dummy_port(iphy), iphy); +} + +static void sci_phy_ready_state_exit(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + + sci_phy_suspend(iphy); +} + +static void sci_phy_resetting_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_phy *iphy = container_of(sm, typeof(*iphy), sm); + + /* The phy is being reset, therefore deactivate it from the port. In + * the resetting state we don't notify the user regarding link up and + * link down notifications + */ + sci_port_deactivate_phy(iphy->owning_port, iphy, false); + + if (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { + scu_link_layer_tx_hard_reset(iphy); + } else { + /* The SCU does not need to have a discrete reset state so + * just go back to the starting state. + */ + sci_change_state(&iphy->sm, SCI_PHY_STARTING); + } +} + +static const struct sci_base_state sci_phy_state_table[] = { + [SCI_PHY_INITIAL] = { }, + [SCI_PHY_STOPPED] = { + .enter_state = sci_phy_stopped_state_enter, + }, + [SCI_PHY_STARTING] = { + .enter_state = sci_phy_starting_state_enter, + }, + [SCI_PHY_SUB_INITIAL] = { + .enter_state = sci_phy_starting_initial_substate_enter, + }, + [SCI_PHY_SUB_AWAIT_OSSP_EN] = { }, + [SCI_PHY_SUB_AWAIT_SAS_SPEED_EN] = { }, + [SCI_PHY_SUB_AWAIT_IAF_UF] = { }, + [SCI_PHY_SUB_AWAIT_SAS_POWER] = { + .enter_state = sci_phy_starting_await_sas_power_substate_enter, + .exit_state = sci_phy_starting_await_sas_power_substate_exit, + }, + [SCI_PHY_SUB_AWAIT_SATA_POWER] = { + .enter_state = sci_phy_starting_await_sata_power_substate_enter, + .exit_state = sci_phy_starting_await_sata_power_substate_exit + }, + [SCI_PHY_SUB_AWAIT_SATA_PHY_EN] = { + .enter_state = sci_phy_starting_await_sata_phy_substate_enter, + .exit_state = sci_phy_starting_await_sata_phy_substate_exit + }, + [SCI_PHY_SUB_AWAIT_SATA_SPEED_EN] = { + .enter_state = sci_phy_starting_await_sata_speed_substate_enter, + .exit_state = sci_phy_starting_await_sata_speed_substate_exit + }, + [SCI_PHY_SUB_AWAIT_SIG_FIS_UF] = { + .enter_state = sci_phy_starting_await_sig_fis_uf_substate_enter, + .exit_state = sci_phy_starting_await_sig_fis_uf_substate_exit + }, + [SCI_PHY_SUB_FINAL] = { + .enter_state = sci_phy_starting_final_substate_enter, + }, + [SCI_PHY_READY] = { + .enter_state = sci_phy_ready_state_enter, + .exit_state = sci_phy_ready_state_exit, + }, + [SCI_PHY_RESETTING] = { + .enter_state = sci_phy_resetting_state_enter, + }, + [SCI_PHY_FINAL] = { }, +}; + +void sci_phy_construct(struct isci_phy *iphy, + struct isci_port *iport, u8 phy_index) +{ + sci_init_sm(&iphy->sm, sci_phy_state_table, SCI_PHY_INITIAL); + + /* Copy the rest of the input data to our locals */ + iphy->owning_port = iport; + iphy->phy_index = phy_index; + iphy->bcn_received_while_port_unassigned = false; + iphy->protocol = SCIC_SDS_PHY_PROTOCOL_UNKNOWN; + iphy->link_layer_registers = NULL; + iphy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN; + + /* Create the SIGNATURE FIS Timeout timer for this phy */ + sci_init_timer(&iphy->sata_timer, phy_sata_timeout); +} + +void isci_phy_init(struct isci_phy *iphy, struct isci_host *ihost, int index) +{ + struct sci_oem_params *oem = &ihost->oem_parameters; + u64 sci_sas_addr; + __be64 sas_addr; + + sci_sas_addr = oem->phys[index].sas_address.high; + sci_sas_addr <<= 32; + sci_sas_addr |= oem->phys[index].sas_address.low; + sas_addr = cpu_to_be64(sci_sas_addr); + memcpy(iphy->sas_addr, &sas_addr, sizeof(sas_addr)); + + iphy->isci_port = NULL; + iphy->sas_phy.enabled = 0; + iphy->sas_phy.id = index; + iphy->sas_phy.sas_addr = &iphy->sas_addr[0]; + iphy->sas_phy.frame_rcvd = (u8 *)&iphy->frame_rcvd; + iphy->sas_phy.ha = &ihost->sas_ha; + iphy->sas_phy.lldd_phy = iphy; + iphy->sas_phy.enabled = 1; + iphy->sas_phy.class = SAS; + iphy->sas_phy.iproto = SAS_PROTOCOL_ALL; + iphy->sas_phy.tproto = 0; + iphy->sas_phy.type = PHY_TYPE_PHYSICAL; + iphy->sas_phy.role = PHY_ROLE_INITIATOR; + iphy->sas_phy.oob_mode = OOB_NOT_CONNECTED; + iphy->sas_phy.linkrate = SAS_LINK_RATE_UNKNOWN; + memset(&iphy->frame_rcvd, 0, sizeof(iphy->frame_rcvd)); +} + + +/** + * isci_phy_control() - This function is one of the SAS Domain Template + * functions. This is a phy management function. + * @phy: This parameter specifies the sphy being controlled. + * @func: This parameter specifies the phy control function being invoked. + * @buf: This parameter is specific to the phy function being invoked. + * + * status, zero indicates success. + */ +int isci_phy_control(struct asd_sas_phy *sas_phy, + enum phy_func func, + void *buf) +{ + int ret = 0; + struct isci_phy *iphy = sas_phy->lldd_phy; + struct isci_port *iport = iphy->isci_port; + struct isci_host *ihost = sas_phy->ha->lldd_ha; + unsigned long flags; + + dev_dbg(&ihost->pdev->dev, + "%s: phy %p; func %d; buf %p; isci phy %p, port %p\n", + __func__, sas_phy, func, buf, iphy, iport); + + switch (func) { + case PHY_FUNC_DISABLE: + spin_lock_irqsave(&ihost->scic_lock, flags); + sci_phy_stop(iphy); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + break; + + case PHY_FUNC_LINK_RESET: + spin_lock_irqsave(&ihost->scic_lock, flags); + sci_phy_stop(iphy); + sci_phy_start(iphy); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + break; + + case PHY_FUNC_HARD_RESET: + if (!iport) + return -ENODEV; + + /* Perform the port reset. */ + ret = isci_port_perform_hard_reset(ihost, iport, iphy); + + break; + + default: + dev_dbg(&ihost->pdev->dev, + "%s: phy %p; func %d NOT IMPLEMENTED!\n", + __func__, sas_phy, func); + ret = -ENOSYS; + break; + } + return ret; +} diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h new file mode 100644 index 000000000000..67699c8e321c --- /dev/null +++ b/drivers/scsi/isci/phy.h @@ -0,0 +1,504 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef _ISCI_PHY_H_ +#define _ISCI_PHY_H_ + +#include <scsi/sas.h> +#include <scsi/libsas.h> +#include "isci.h" +#include "sas.h" + +/* This is the timeout value for the SATA phy to wait for a SIGNATURE FIS + * before restarting the starting state machine. Technically, the old parallel + * ATA specification required up to 30 seconds for a device to issue its + * signature FIS as a result of a soft reset. Now we see that devices respond + * generally within 15 seconds, but we'll use 25 for now. + */ +#define SCIC_SDS_SIGNATURE_FIS_TIMEOUT 25000 + +/* This is the timeout for the SATA OOB/SN because the hardware does not + * recognize a hot plug after OOB signal but before the SN signals. We need to + * make sure after a hotplug timeout if we have not received the speed event + * notification from the hardware that we restart the hardware OOB state + * machine. + */ +#define SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT 250 + +enum sci_phy_protocol { + SCIC_SDS_PHY_PROTOCOL_UNKNOWN, + SCIC_SDS_PHY_PROTOCOL_SAS, + SCIC_SDS_PHY_PROTOCOL_SATA, + SCIC_SDS_MAX_PHY_PROTOCOLS +}; + +/** + * isci_phy - hba local phy infrastructure + * @sm: + * @protocol: attached device protocol + * @phy_index: physical index relative to the controller (0-3) + * @bcn_received_while_port_unassigned: bcn to report after port association + * @sata_timer: timeout SATA signature FIS arrival + */ +struct isci_phy { + struct sci_base_state_machine sm; + struct isci_port *owning_port; + enum sas_linkrate max_negotiated_speed; + enum sci_phy_protocol protocol; + u8 phy_index; + bool bcn_received_while_port_unassigned; + bool is_in_link_training; + struct sci_timer sata_timer; + struct scu_transport_layer_registers __iomem *transport_layer_registers; + struct scu_link_layer_registers __iomem *link_layer_registers; + struct asd_sas_phy sas_phy; + struct isci_port *isci_port; + u8 sas_addr[SAS_ADDR_SIZE]; + union { + struct sas_identify_frame iaf; + struct dev_to_host_fis fis; + } frame_rcvd; +}; + +static inline struct isci_phy *to_iphy(struct asd_sas_phy *sas_phy) +{ + struct isci_phy *iphy = container_of(sas_phy, typeof(*iphy), sas_phy); + + return iphy; +} + +struct sci_phy_cap { + union { + struct { + /* + * The SAS specification indicates the start bit shall + * always be set to + * 1. This implementation will have the start bit set + * to 0 if the PHY CAPABILITIES were either not + * received or speed negotiation failed. + */ + u8 start:1; + u8 tx_ssc_type:1; + u8 res1:2; + u8 req_logical_linkrate:4; + + u32 gen1_no_ssc:1; + u32 gen1_ssc:1; + u32 gen2_no_ssc:1; + u32 gen2_ssc:1; + u32 gen3_no_ssc:1; + u32 gen3_ssc:1; + u32 res2:17; + u32 parity:1; + }; + u32 all; + }; +} __packed; + +/* this data structure reflects the link layer transmit identification reg */ +struct sci_phy_proto { + union { + struct { + u16 _r_a:1; + u16 smp_iport:1; + u16 stp_iport:1; + u16 ssp_iport:1; + u16 _r_b:4; + u16 _r_c:1; + u16 smp_tport:1; + u16 stp_tport:1; + u16 ssp_tport:1; + u16 _r_d:4; + }; + u16 all; + }; +} __packed; + + +/** + * struct sci_phy_properties - This structure defines the properties common to + * all phys that can be retrieved. + * + * + */ +struct sci_phy_properties { + /** + * This field specifies the port that currently contains the + * supplied phy. This field may be set to NULL + * if the phy is not currently contained in a port. + */ + struct isci_port *iport; + + /** + * This field specifies the link rate at which the phy is + * currently operating. + */ + enum sas_linkrate negotiated_link_rate; + + /** + * This field specifies the index of the phy in relation to other + * phys within the controller. This index is zero relative. + */ + u8 index; +}; + +/** + * struct sci_sas_phy_properties - This structure defines the properties, + * specific to a SAS phy, that can be retrieved. + * + * + */ +struct sci_sas_phy_properties { + /** + * This field delineates the Identify Address Frame received + * from the remote end point. + */ + struct sas_identify_frame rcvd_iaf; + + /** + * This field delineates the Phy capabilities structure received + * from the remote end point. + */ + struct sci_phy_cap rcvd_cap; + +}; + +/** + * struct sci_sata_phy_properties - This structure defines the properties, + * specific to a SATA phy, that can be retrieved. + * + * + */ +struct sci_sata_phy_properties { + /** + * This field delineates the signature FIS received from the + * attached target. + */ + struct dev_to_host_fis signature_fis; + + /** + * This field specifies to the user if a port selector is connected + * on the specified phy. + */ + bool is_port_selector_present; + +}; + +/** + * enum sci_phy_counter_id - This enumeration depicts the various pieces of + * optional information that can be retrieved for a specific phy. + * + * + */ +enum sci_phy_counter_id { + /** + * This PHY information field tracks the number of frames received. + */ + SCIC_PHY_COUNTER_RECEIVED_FRAME, + + /** + * This PHY information field tracks the number of frames transmitted. + */ + SCIC_PHY_COUNTER_TRANSMITTED_FRAME, + + /** + * This PHY information field tracks the number of DWORDs received. + */ + SCIC_PHY_COUNTER_RECEIVED_FRAME_WORD, + + /** + * This PHY information field tracks the number of DWORDs transmitted. + */ + SCIC_PHY_COUNTER_TRANSMITTED_FRAME_DWORD, + + /** + * This PHY information field tracks the number of times DWORD + * synchronization was lost. + */ + SCIC_PHY_COUNTER_LOSS_OF_SYNC_ERROR, + + /** + * This PHY information field tracks the number of received DWORDs with + * running disparity errors. + */ + SCIC_PHY_COUNTER_RECEIVED_DISPARITY_ERROR, + + /** + * This PHY information field tracks the number of received frames with a + * CRC error (not including short or truncated frames). + */ + SCIC_PHY_COUNTER_RECEIVED_FRAME_CRC_ERROR, + + /** + * This PHY information field tracks the number of DONE (ACK/NAK TIMEOUT) + * primitives received. + */ + SCIC_PHY_COUNTER_RECEIVED_DONE_ACK_NAK_TIMEOUT, + + /** + * This PHY information field tracks the number of DONE (ACK/NAK TIMEOUT) + * primitives transmitted. + */ + SCIC_PHY_COUNTER_TRANSMITTED_DONE_ACK_NAK_TIMEOUT, + + /** + * This PHY information field tracks the number of times the inactivity + * timer for connections on the phy has been utilized. + */ + SCIC_PHY_COUNTER_INACTIVITY_TIMER_EXPIRED, + + /** + * This PHY information field tracks the number of DONE (CREDIT TIMEOUT) + * primitives received. + */ + SCIC_PHY_COUNTER_RECEIVED_DONE_CREDIT_TIMEOUT, + + /** + * This PHY information field tracks the number of DONE (CREDIT TIMEOUT) + * primitives transmitted. + */ + SCIC_PHY_COUNTER_TRANSMITTED_DONE_CREDIT_TIMEOUT, + + /** + * This PHY information field tracks the number of CREDIT BLOCKED + * primitives received. + * @note Depending on remote device implementation, credit blocks + * may occur regularly. + */ + SCIC_PHY_COUNTER_RECEIVED_CREDIT_BLOCKED, + + /** + * This PHY information field contains the number of short frames + * received. A short frame is simply a frame smaller then what is + * allowed by either the SAS or SATA specification. + */ + SCIC_PHY_COUNTER_RECEIVED_SHORT_FRAME, + + /** + * This PHY information field contains the number of frames received after + * credit has been exhausted. + */ + SCIC_PHY_COUNTER_RECEIVED_FRAME_WITHOUT_CREDIT, + + /** + * This PHY information field contains the number of frames received after + * a DONE has been received. + */ + SCIC_PHY_COUNTER_RECEIVED_FRAME_AFTER_DONE, + + /** + * This PHY information field contains the number of times the phy + * failed to achieve DWORD synchronization during speed negotiation. + */ + SCIC_PHY_COUNTER_SN_DWORD_SYNC_ERROR +}; + +enum sci_phy_states { + /** + * Simply the initial state for the base domain state machine. + */ + SCI_PHY_INITIAL, + + /** + * This state indicates that the phy has successfully been stopped. + * In this state no new IO operations are permitted on this phy. + * This state is entered from the INITIAL state. + * This state is entered from the STARTING state. + * This state is entered from the READY state. + * This state is entered from the RESETTING state. + */ + SCI_PHY_STOPPED, + + /** + * This state indicates that the phy is in the process of becomming + * ready. In this state no new IO operations are permitted on this phy. + * This state is entered from the STOPPED state. + * This state is entered from the READY state. + * This state is entered from the RESETTING state. + */ + SCI_PHY_STARTING, + + /** + * Initial state + */ + SCI_PHY_SUB_INITIAL, + + /** + * Wait state for the hardware OSSP event type notification + */ + SCI_PHY_SUB_AWAIT_OSSP_EN, + + /** + * Wait state for the PHY speed notification + */ + SCI_PHY_SUB_AWAIT_SAS_SPEED_EN, + + /** + * Wait state for the IAF Unsolicited frame notification + */ + SCI_PHY_SUB_AWAIT_IAF_UF, + + /** + * Wait state for the request to consume power + */ + SCI_PHY_SUB_AWAIT_SAS_POWER, + + /** + * Wait state for request to consume power + */ + SCI_PHY_SUB_AWAIT_SATA_POWER, + + /** + * Wait state for the SATA PHY notification + */ + SCI_PHY_SUB_AWAIT_SATA_PHY_EN, + + /** + * Wait for the SATA PHY speed notification + */ + SCI_PHY_SUB_AWAIT_SATA_SPEED_EN, + + /** + * Wait state for the SIGNATURE FIS unsolicited frame notification + */ + SCI_PHY_SUB_AWAIT_SIG_FIS_UF, + + /** + * Exit state for this state machine + */ + SCI_PHY_SUB_FINAL, + + /** + * This state indicates the the phy is now ready. Thus, the user + * is able to perform IO operations utilizing this phy as long as it + * is currently part of a valid port. + * This state is entered from the STARTING state. + */ + SCI_PHY_READY, + + /** + * This state indicates that the phy is in the process of being reset. + * In this state no new IO operations are permitted on this phy. + * This state is entered from the READY state. + */ + SCI_PHY_RESETTING, + + /** + * Simply the final state for the base phy state machine. + */ + SCI_PHY_FINAL, +}; + +void sci_phy_construct( + struct isci_phy *iphy, + struct isci_port *iport, + u8 phy_index); + +struct isci_port *phy_get_non_dummy_port(struct isci_phy *iphy); + +void sci_phy_set_port( + struct isci_phy *iphy, + struct isci_port *iport); + +enum sci_status sci_phy_initialize( + struct isci_phy *iphy, + struct scu_transport_layer_registers __iomem *transport_layer_registers, + struct scu_link_layer_registers __iomem *link_layer_registers); + +enum sci_status sci_phy_start( + struct isci_phy *iphy); + +enum sci_status sci_phy_stop( + struct isci_phy *iphy); + +enum sci_status sci_phy_reset( + struct isci_phy *iphy); + +void sci_phy_resume( + struct isci_phy *iphy); + +void sci_phy_setup_transport( + struct isci_phy *iphy, + u32 device_id); + +enum sci_status sci_phy_event_handler( + struct isci_phy *iphy, + u32 event_code); + +enum sci_status sci_phy_frame_handler( + struct isci_phy *iphy, + u32 frame_index); + +enum sci_status sci_phy_consume_power_handler( + struct isci_phy *iphy); + +void sci_phy_get_sas_address( + struct isci_phy *iphy, + struct sci_sas_address *sas_address); + +void sci_phy_get_attached_sas_address( + struct isci_phy *iphy, + struct sci_sas_address *sas_address); + +struct sci_phy_proto; +void sci_phy_get_protocols( + struct isci_phy *iphy, + struct sci_phy_proto *protocols); +enum sas_linkrate sci_phy_linkrate(struct isci_phy *iphy); + +struct isci_host; +void isci_phy_init(struct isci_phy *iphy, struct isci_host *ihost, int index); +int isci_phy_control(struct asd_sas_phy *phy, enum phy_func func, void *buf); + +#endif /* !defined(_ISCI_PHY_H_) */ diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c new file mode 100644 index 000000000000..8f6f9b77e41a --- /dev/null +++ b/drivers/scsi/isci/port.c @@ -0,0 +1,1757 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "isci.h" +#include "port.h" +#include "request.h" + +#define SCIC_SDS_PORT_HARD_RESET_TIMEOUT (1000) +#define SCU_DUMMY_INDEX (0xFFFF) + +static void isci_port_change_state(struct isci_port *iport, enum isci_status status) +{ + unsigned long flags; + + dev_dbg(&iport->isci_host->pdev->dev, + "%s: iport = %p, state = 0x%x\n", + __func__, iport, status); + + /* XXX pointless lock */ + spin_lock_irqsave(&iport->state_lock, flags); + iport->status = status; + spin_unlock_irqrestore(&iport->state_lock, flags); +} + +static void sci_port_get_protocols(struct isci_port *iport, struct sci_phy_proto *proto) +{ + u8 index; + + proto->all = 0; + for (index = 0; index < SCI_MAX_PHYS; index++) { + struct isci_phy *iphy = iport->phy_table[index]; + + if (!iphy) + continue; + sci_phy_get_protocols(iphy, proto); + } +} + +static u32 sci_port_get_phys(struct isci_port *iport) +{ + u32 index; + u32 mask; + + mask = 0; + for (index = 0; index < SCI_MAX_PHYS; index++) + if (iport->phy_table[index]) + mask |= (1 << index); + + return mask; +} + +/** + * sci_port_get_properties() - This method simply returns the properties + * regarding the port, such as: physical index, protocols, sas address, etc. + * @port: this parameter specifies the port for which to retrieve the physical + * index. + * @properties: This parameter specifies the properties structure into which to + * copy the requested information. + * + * Indicate if the user specified a valid port. SCI_SUCCESS This value is + * returned if the specified port was valid. SCI_FAILURE_INVALID_PORT This + * value is returned if the specified port is not valid. When this value is + * returned, no data is copied to the properties output parameter. + */ +static enum sci_status sci_port_get_properties(struct isci_port *iport, + struct sci_port_properties *prop) +{ + if (!iport || iport->logical_port_index == SCIC_SDS_DUMMY_PORT) + return SCI_FAILURE_INVALID_PORT; + + prop->index = iport->logical_port_index; + prop->phy_mask = sci_port_get_phys(iport); + sci_port_get_sas_address(iport, &prop->local.sas_address); + sci_port_get_protocols(iport, &prop->local.protocols); + sci_port_get_attached_sas_address(iport, &prop->remote.sas_address); + + return SCI_SUCCESS; +} + +static void sci_port_bcn_enable(struct isci_port *iport) +{ + struct isci_phy *iphy; + u32 val; + int i; + + for (i = 0; i < ARRAY_SIZE(iport->phy_table); i++) { + iphy = iport->phy_table[i]; + if (!iphy) + continue; + val = readl(&iphy->link_layer_registers->link_layer_control); + /* clear the bit by writing 1. */ + writel(val, &iphy->link_layer_registers->link_layer_control); + } +} + +/* called under sci_lock to stabilize phy:port associations */ +void isci_port_bcn_enable(struct isci_host *ihost, struct isci_port *iport) +{ + int i; + + clear_bit(IPORT_BCN_BLOCKED, &iport->flags); + wake_up(&ihost->eventq); + + if (!test_and_clear_bit(IPORT_BCN_PENDING, &iport->flags)) + return; + + for (i = 0; i < ARRAY_SIZE(iport->phy_table); i++) { + struct isci_phy *iphy = iport->phy_table[i]; + + if (!iphy) + continue; + + ihost->sas_ha.notify_port_event(&iphy->sas_phy, + PORTE_BROADCAST_RCVD); + break; + } +} + +static void isci_port_bc_change_received(struct isci_host *ihost, + struct isci_port *iport, + struct isci_phy *iphy) +{ + if (iport && test_bit(IPORT_BCN_BLOCKED, &iport->flags)) { + dev_dbg(&ihost->pdev->dev, + "%s: disabled BCN; isci_phy = %p, sas_phy = %p\n", + __func__, iphy, &iphy->sas_phy); + set_bit(IPORT_BCN_PENDING, &iport->flags); + atomic_inc(&iport->event); + wake_up(&ihost->eventq); + } else { + dev_dbg(&ihost->pdev->dev, + "%s: isci_phy = %p, sas_phy = %p\n", + __func__, iphy, &iphy->sas_phy); + + ihost->sas_ha.notify_port_event(&iphy->sas_phy, + PORTE_BROADCAST_RCVD); + } + sci_port_bcn_enable(iport); +} + +static void isci_port_link_up(struct isci_host *isci_host, + struct isci_port *iport, + struct isci_phy *iphy) +{ + unsigned long flags; + struct sci_port_properties properties; + unsigned long success = true; + + BUG_ON(iphy->isci_port != NULL); + + iphy->isci_port = iport; + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_port = %p\n", + __func__, iport); + + spin_lock_irqsave(&iphy->sas_phy.frame_rcvd_lock, flags); + + isci_port_change_state(iphy->isci_port, isci_starting); + + sci_port_get_properties(iport, &properties); + + if (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) { + u64 attached_sas_address; + + iphy->sas_phy.oob_mode = SATA_OOB_MODE; + iphy->sas_phy.frame_rcvd_size = sizeof(struct dev_to_host_fis); + + /* + * For direct-attached SATA devices, the SCI core will + * automagically assign a SAS address to the end device + * for the purpose of creating a port. This SAS address + * will not be the same as assigned to the PHY and needs + * to be obtained from struct sci_port_properties properties. + */ + attached_sas_address = properties.remote.sas_address.high; + attached_sas_address <<= 32; + attached_sas_address |= properties.remote.sas_address.low; + swab64s(&attached_sas_address); + + memcpy(&iphy->sas_phy.attached_sas_addr, + &attached_sas_address, sizeof(attached_sas_address)); + } else if (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) { + iphy->sas_phy.oob_mode = SAS_OOB_MODE; + iphy->sas_phy.frame_rcvd_size = sizeof(struct sas_identify_frame); + + /* Copy the attached SAS address from the IAF */ + memcpy(iphy->sas_phy.attached_sas_addr, + iphy->frame_rcvd.iaf.sas_addr, SAS_ADDR_SIZE); + } else { + dev_err(&isci_host->pdev->dev, "%s: unkown target\n", __func__); + success = false; + } + + iphy->sas_phy.phy->negotiated_linkrate = sci_phy_linkrate(iphy); + + spin_unlock_irqrestore(&iphy->sas_phy.frame_rcvd_lock, flags); + + /* Notify libsas that we have an address frame, if indeed + * we've found an SSP, SMP, or STP target */ + if (success) + isci_host->sas_ha.notify_port_event(&iphy->sas_phy, + PORTE_BYTES_DMAED); +} + + +/** + * isci_port_link_down() - This function is called by the sci core when a link + * becomes inactive. + * @isci_host: This parameter specifies the isci host object. + * @phy: This parameter specifies the isci phy with the active link. + * @port: This parameter specifies the isci port with the active link. + * + */ +static void isci_port_link_down(struct isci_host *isci_host, + struct isci_phy *isci_phy, + struct isci_port *isci_port) +{ + struct isci_remote_device *isci_device; + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_port = %p\n", __func__, isci_port); + + if (isci_port) { + + /* check to see if this is the last phy on this port. */ + if (isci_phy->sas_phy.port && + isci_phy->sas_phy.port->num_phys == 1) { + atomic_inc(&isci_port->event); + isci_port_bcn_enable(isci_host, isci_port); + + /* change the state for all devices on this port. The + * next task sent to this device will be returned as + * SAS_TASK_UNDELIVERED, and the scsi mid layer will + * remove the target + */ + list_for_each_entry(isci_device, + &isci_port->remote_dev_list, + node) { + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device = %p\n", + __func__, isci_device); + set_bit(IDEV_GONE, &isci_device->flags); + } + } + isci_port_change_state(isci_port, isci_stopping); + } + + /* Notify libsas of the borken link, this will trigger calls to our + * isci_port_deformed and isci_dev_gone functions. + */ + sas_phy_disconnected(&isci_phy->sas_phy); + isci_host->sas_ha.notify_phy_event(&isci_phy->sas_phy, + PHYE_LOSS_OF_SIGNAL); + + isci_phy->isci_port = NULL; + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_port = %p - Done\n", __func__, isci_port); +} + + +/** + * isci_port_ready() - This function is called by the sci core when a link + * becomes ready. + * @isci_host: This parameter specifies the isci host object. + * @port: This parameter specifies the sci port with the active link. + * + */ +static void isci_port_ready(struct isci_host *isci_host, struct isci_port *isci_port) +{ + dev_dbg(&isci_host->pdev->dev, + "%s: isci_port = %p\n", __func__, isci_port); + + complete_all(&isci_port->start_complete); + isci_port_change_state(isci_port, isci_ready); + return; +} + +/** + * isci_port_not_ready() - This function is called by the sci core when a link + * is not ready. All remote devices on this link will be removed if they are + * in the stopping state. + * @isci_host: This parameter specifies the isci host object. + * @port: This parameter specifies the sci port with the active link. + * + */ +static void isci_port_not_ready(struct isci_host *isci_host, struct isci_port *isci_port) +{ + dev_dbg(&isci_host->pdev->dev, + "%s: isci_port = %p\n", __func__, isci_port); +} + +static void isci_port_stop_complete(struct isci_host *ihost, + struct isci_port *iport, + enum sci_status completion_status) +{ + dev_dbg(&ihost->pdev->dev, "Port stop complete\n"); +} + +/** + * isci_port_hard_reset_complete() - This function is called by the sci core + * when the hard reset complete notification has been received. + * @port: This parameter specifies the sci port with the active link. + * @completion_status: This parameter specifies the core status for the reset + * process. + * + */ +static void isci_port_hard_reset_complete(struct isci_port *isci_port, + enum sci_status completion_status) +{ + dev_dbg(&isci_port->isci_host->pdev->dev, + "%s: isci_port = %p, completion_status=%x\n", + __func__, isci_port, completion_status); + + /* Save the status of the hard reset from the port. */ + isci_port->hard_reset_status = completion_status; + + complete_all(&isci_port->hard_reset_complete); +} + +/* This method will return a true value if the specified phy can be assigned to + * this port The following is a list of phys for each port that are allowed: - + * Port 0 - 3 2 1 0 - Port 1 - 1 - Port 2 - 3 2 - Port 3 - 3 This method + * doesn't preclude all configurations. It merely ensures that a phy is part + * of the allowable set of phy identifiers for that port. For example, one + * could assign phy 3 to port 0 and no other phys. Please refer to + * sci_port_is_phy_mask_valid() for information regarding whether the + * phy_mask for a port can be supported. bool true if this is a valid phy + * assignment for the port false if this is not a valid phy assignment for the + * port + */ +bool sci_port_is_valid_phy_assignment(struct isci_port *iport, u32 phy_index) +{ + struct isci_host *ihost = iport->owning_controller; + struct sci_user_parameters *user = &ihost->user_parameters; + + /* Initialize to invalid value. */ + u32 existing_phy_index = SCI_MAX_PHYS; + u32 index; + + if ((iport->physical_port_index == 1) && (phy_index != 1)) + return false; + + if (iport->physical_port_index == 3 && phy_index != 3) + return false; + + if (iport->physical_port_index == 2 && + (phy_index == 0 || phy_index == 1)) + return false; + + for (index = 0; index < SCI_MAX_PHYS; index++) + if (iport->phy_table[index] && index != phy_index) + existing_phy_index = index; + + /* Ensure that all of the phys in the port are capable of + * operating at the same maximum link rate. + */ + if (existing_phy_index < SCI_MAX_PHYS && + user->phys[phy_index].max_speed_generation != + user->phys[existing_phy_index].max_speed_generation) + return false; + + return true; +} + +/** + * + * @sci_port: This is the port object for which to determine if the phy mask + * can be supported. + * + * This method will return a true value if the port's phy mask can be supported + * by the SCU. The following is a list of valid PHY mask configurations for + * each port: - Port 0 - [[3 2] 1] 0 - Port 1 - [1] - Port 2 - [[3] 2] + * - Port 3 - [3] This method returns a boolean indication specifying if the + * phy mask can be supported. true if this is a valid phy assignment for the + * port false if this is not a valid phy assignment for the port + */ +static bool sci_port_is_phy_mask_valid( + struct isci_port *iport, + u32 phy_mask) +{ + if (iport->physical_port_index == 0) { + if (((phy_mask & 0x0F) == 0x0F) + || ((phy_mask & 0x03) == 0x03) + || ((phy_mask & 0x01) == 0x01) + || (phy_mask == 0)) + return true; + } else if (iport->physical_port_index == 1) { + if (((phy_mask & 0x02) == 0x02) + || (phy_mask == 0)) + return true; + } else if (iport->physical_port_index == 2) { + if (((phy_mask & 0x0C) == 0x0C) + || ((phy_mask & 0x04) == 0x04) + || (phy_mask == 0)) + return true; + } else if (iport->physical_port_index == 3) { + if (((phy_mask & 0x08) == 0x08) + || (phy_mask == 0)) + return true; + } + + return false; +} + +/* + * This method retrieves a currently active (i.e. connected) phy contained in + * the port. Currently, the lowest order phy that is connected is returned. + * This method returns a pointer to a SCIS_SDS_PHY object. NULL This value is + * returned if there are no currently active (i.e. connected to a remote end + * point) phys contained in the port. All other values specify a struct sci_phy + * object that is active in the port. + */ +static struct isci_phy *sci_port_get_a_connected_phy(struct isci_port *iport) +{ + u32 index; + struct isci_phy *iphy; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + /* Ensure that the phy is both part of the port and currently + * connected to the remote end-point. + */ + iphy = iport->phy_table[index]; + if (iphy && sci_port_active_phy(iport, iphy)) + return iphy; + } + + return NULL; +} + +static enum sci_status sci_port_set_phy(struct isci_port *iport, struct isci_phy *iphy) +{ + /* Check to see if we can add this phy to a port + * that means that the phy is not part of a port and that the port does + * not already have a phy assinged to the phy index. + */ + if (!iport->phy_table[iphy->phy_index] && + !phy_get_non_dummy_port(iphy) && + sci_port_is_valid_phy_assignment(iport, iphy->phy_index)) { + /* Phy is being added in the stopped state so we are in MPC mode + * make logical port index = physical port index + */ + iport->logical_port_index = iport->physical_port_index; + iport->phy_table[iphy->phy_index] = iphy; + sci_phy_set_port(iphy, iport); + + return SCI_SUCCESS; + } + + return SCI_FAILURE; +} + +static enum sci_status sci_port_clear_phy(struct isci_port *iport, struct isci_phy *iphy) +{ + /* Make sure that this phy is part of this port */ + if (iport->phy_table[iphy->phy_index] == iphy && + phy_get_non_dummy_port(iphy) == iport) { + struct isci_host *ihost = iport->owning_controller; + + /* Yep it is assigned to this port so remove it */ + sci_phy_set_port(iphy, &ihost->ports[SCI_MAX_PORTS]); + iport->phy_table[iphy->phy_index] = NULL; + return SCI_SUCCESS; + } + + return SCI_FAILURE; +} + +void sci_port_get_sas_address(struct isci_port *iport, struct sci_sas_address *sas) +{ + u32 index; + + sas->high = 0; + sas->low = 0; + for (index = 0; index < SCI_MAX_PHYS; index++) + if (iport->phy_table[index]) + sci_phy_get_sas_address(iport->phy_table[index], sas); +} + +void sci_port_get_attached_sas_address(struct isci_port *iport, struct sci_sas_address *sas) +{ + struct isci_phy *iphy; + + /* + * Ensure that the phy is both part of the port and currently + * connected to the remote end-point. + */ + iphy = sci_port_get_a_connected_phy(iport); + if (iphy) { + if (iphy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA) { + sci_phy_get_attached_sas_address(iphy, sas); + } else { + sci_phy_get_sas_address(iphy, sas); + sas->low += iphy->phy_index; + } + } else { + sas->high = 0; + sas->low = 0; + } +} + +/** + * sci_port_construct_dummy_rnc() - create dummy rnc for si workaround + * + * @sci_port: logical port on which we need to create the remote node context + * @rni: remote node index for this remote node context. + * + * This routine will construct a dummy remote node context data structure + * This structure will be posted to the hardware to work around a scheduler + * error in the hardware. + */ +static void sci_port_construct_dummy_rnc(struct isci_port *iport, u16 rni) +{ + union scu_remote_node_context *rnc; + + rnc = &iport->owning_controller->remote_node_context_table[rni]; + + memset(rnc, 0, sizeof(union scu_remote_node_context)); + + rnc->ssp.remote_sas_address_hi = 0; + rnc->ssp.remote_sas_address_lo = 0; + + rnc->ssp.remote_node_index = rni; + rnc->ssp.remote_node_port_width = 1; + rnc->ssp.logical_port_index = iport->physical_port_index; + + rnc->ssp.nexus_loss_timer_enable = false; + rnc->ssp.check_bit = false; + rnc->ssp.is_valid = true; + rnc->ssp.is_remote_node_context = true; + rnc->ssp.function_number = 0; + rnc->ssp.arbitration_wait_time = 0; +} + +/* + * construct a dummy task context data structure. This + * structure will be posted to the hardwre to work around a scheduler error + * in the hardware. + */ +static void sci_port_construct_dummy_task(struct isci_port *iport, u16 tag) +{ + struct isci_host *ihost = iport->owning_controller; + struct scu_task_context *task_context; + + task_context = &ihost->task_context_table[ISCI_TAG_TCI(tag)]; + memset(task_context, 0, sizeof(struct scu_task_context)); + + task_context->initiator_request = 1; + task_context->connection_rate = 1; + task_context->logical_port_index = iport->physical_port_index; + task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SSP; + task_context->task_index = ISCI_TAG_TCI(tag); + task_context->valid = SCU_TASK_CONTEXT_VALID; + task_context->context_type = SCU_TASK_CONTEXT_TYPE; + task_context->remote_node_index = iport->reserved_rni; + task_context->do_not_dma_ssp_good_response = 1; + task_context->task_phase = 0x01; +} + +static void sci_port_destroy_dummy_resources(struct isci_port *iport) +{ + struct isci_host *ihost = iport->owning_controller; + + if (iport->reserved_tag != SCI_CONTROLLER_INVALID_IO_TAG) + isci_free_tag(ihost, iport->reserved_tag); + + if (iport->reserved_rni != SCU_DUMMY_INDEX) + sci_remote_node_table_release_remote_node_index(&ihost->available_remote_nodes, + 1, iport->reserved_rni); + + iport->reserved_rni = SCU_DUMMY_INDEX; + iport->reserved_tag = SCI_CONTROLLER_INVALID_IO_TAG; +} + +void sci_port_setup_transports(struct isci_port *iport, u32 device_id) +{ + u8 index; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + if (iport->active_phy_mask & (1 << index)) + sci_phy_setup_transport(iport->phy_table[index], device_id); + } +} + +static void sci_port_activate_phy(struct isci_port *iport, struct isci_phy *iphy, + bool do_notify_user) +{ + struct isci_host *ihost = iport->owning_controller; + + if (iphy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA) + sci_phy_resume(iphy); + + iport->active_phy_mask |= 1 << iphy->phy_index; + + sci_controller_clear_invalid_phy(ihost, iphy); + + if (do_notify_user == true) + isci_port_link_up(ihost, iport, iphy); +} + +void sci_port_deactivate_phy(struct isci_port *iport, struct isci_phy *iphy, + bool do_notify_user) +{ + struct isci_host *ihost = iport->owning_controller; + + iport->active_phy_mask &= ~(1 << iphy->phy_index); + + iphy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN; + + /* Re-assign the phy back to the LP as if it were a narrow port */ + writel(iphy->phy_index, + &iport->port_pe_configuration_register[iphy->phy_index]); + + if (do_notify_user == true) + isci_port_link_down(ihost, iphy, iport); +} + +static void sci_port_invalid_link_up(struct isci_port *iport, struct isci_phy *iphy) +{ + struct isci_host *ihost = iport->owning_controller; + + /* + * Check to see if we have alreay reported this link as bad and if + * not go ahead and tell the SCI_USER that we have discovered an + * invalid link. + */ + if ((ihost->invalid_phy_mask & (1 << iphy->phy_index)) == 0) { + ihost->invalid_phy_mask |= 1 << iphy->phy_index; + dev_warn(&ihost->pdev->dev, "Invalid link up!\n"); + } +} + +static bool is_port_ready_state(enum sci_port_states state) +{ + switch (state) { + case SCI_PORT_READY: + case SCI_PORT_SUB_WAITING: + case SCI_PORT_SUB_OPERATIONAL: + case SCI_PORT_SUB_CONFIGURING: + return true; + default: + return false; + } +} + +/* flag dummy rnc hanling when exiting a ready state */ +static void port_state_machine_change(struct isci_port *iport, + enum sci_port_states state) +{ + struct sci_base_state_machine *sm = &iport->sm; + enum sci_port_states old_state = sm->current_state_id; + + if (is_port_ready_state(old_state) && !is_port_ready_state(state)) + iport->ready_exit = true; + + sci_change_state(sm, state); + iport->ready_exit = false; +} + +/** + * sci_port_general_link_up_handler - phy can be assigned to port? + * @sci_port: sci_port object for which has a phy that has gone link up. + * @sci_phy: This is the struct isci_phy object that has gone link up. + * @do_notify_user: This parameter specifies whether to inform the user (via + * sci_port_link_up()) as to the fact that a new phy as become ready. + * + * Determine if this phy can be assigned to this + * port . If the phy is not a valid PHY for + * this port then the function will notify the user. A PHY can only be + * part of a port if it's attached SAS ADDRESS is the same as all other PHYs in + * the same port. none + */ +static void sci_port_general_link_up_handler(struct isci_port *iport, + struct isci_phy *iphy, + bool do_notify_user) +{ + struct sci_sas_address port_sas_address; + struct sci_sas_address phy_sas_address; + + sci_port_get_attached_sas_address(iport, &port_sas_address); + sci_phy_get_attached_sas_address(iphy, &phy_sas_address); + + /* If the SAS address of the new phy matches the SAS address of + * other phys in the port OR this is the first phy in the port, + * then activate the phy and allow it to be used for operations + * in this port. + */ + if ((phy_sas_address.high == port_sas_address.high && + phy_sas_address.low == port_sas_address.low) || + iport->active_phy_mask == 0) { + struct sci_base_state_machine *sm = &iport->sm; + + sci_port_activate_phy(iport, iphy, do_notify_user); + if (sm->current_state_id == SCI_PORT_RESETTING) + port_state_machine_change(iport, SCI_PORT_READY); + } else + sci_port_invalid_link_up(iport, iphy); +} + + + +/** + * This method returns false if the port only has a single phy object assigned. + * If there are no phys or more than one phy then the method will return + * true. + * @sci_port: The port for which the wide port condition is to be checked. + * + * bool true Is returned if this is a wide ported port. false Is returned if + * this is a narrow port. + */ +static bool sci_port_is_wide(struct isci_port *iport) +{ + u32 index; + u32 phy_count = 0; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + if (iport->phy_table[index] != NULL) { + phy_count++; + } + } + + return phy_count != 1; +} + +/** + * This method is called by the PHY object when the link is detected. if the + * port wants the PHY to continue on to the link up state then the port + * layer must return true. If the port object returns false the phy object + * must halt its attempt to go link up. + * @sci_port: The port associated with the phy object. + * @sci_phy: The phy object that is trying to go link up. + * + * true if the phy object can continue to the link up condition. true Is + * returned if this phy can continue to the ready state. false Is returned if + * can not continue on to the ready state. This notification is in place for + * wide ports and direct attached phys. Since there are no wide ported SATA + * devices this could become an invalid port configuration. + */ +bool sci_port_link_detected( + struct isci_port *iport, + struct isci_phy *iphy) +{ + if ((iport->logical_port_index != SCIC_SDS_DUMMY_PORT) && + (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) && + sci_port_is_wide(iport)) { + sci_port_invalid_link_up(iport, iphy); + + return false; + } + + return true; +} + +static void port_timeout(unsigned long data) +{ + struct sci_timer *tmr = (struct sci_timer *)data; + struct isci_port *iport = container_of(tmr, typeof(*iport), timer); + struct isci_host *ihost = iport->owning_controller; + unsigned long flags; + u32 current_state; + + spin_lock_irqsave(&ihost->scic_lock, flags); + + if (tmr->cancel) + goto done; + + current_state = iport->sm.current_state_id; + + if (current_state == SCI_PORT_RESETTING) { + /* if the port is still in the resetting state then the timeout + * fired before the reset completed. + */ + port_state_machine_change(iport, SCI_PORT_FAILED); + } else if (current_state == SCI_PORT_STOPPED) { + /* if the port is stopped then the start request failed In this + * case stay in the stopped state. + */ + dev_err(sciport_to_dev(iport), + "%s: SCIC Port 0x%p failed to stop before tiemout.\n", + __func__, + iport); + } else if (current_state == SCI_PORT_STOPPING) { + /* if the port is still stopping then the stop has not completed */ + isci_port_stop_complete(iport->owning_controller, + iport, + SCI_FAILURE_TIMEOUT); + } else { + /* The port is in the ready state and we have a timer + * reporting a timeout this should not happen. + */ + dev_err(sciport_to_dev(iport), + "%s: SCIC Port 0x%p is processing a timeout operation " + "in state %d.\n", __func__, iport, current_state); + } + +done: + spin_unlock_irqrestore(&ihost->scic_lock, flags); +} + +/* --------------------------------------------------------------------------- */ + +/** + * This function updates the hardwares VIIT entry for this port. + * + * + */ +static void sci_port_update_viit_entry(struct isci_port *iport) +{ + struct sci_sas_address sas_address; + + sci_port_get_sas_address(iport, &sas_address); + + writel(sas_address.high, + &iport->viit_registers->initiator_sas_address_hi); + writel(sas_address.low, + &iport->viit_registers->initiator_sas_address_lo); + + /* This value get cleared just in case its not already cleared */ + writel(0, &iport->viit_registers->reserved); + + /* We are required to update the status register last */ + writel(SCU_VIIT_ENTRY_ID_VIIT | + SCU_VIIT_IPPT_INITIATOR | + ((1 << iport->physical_port_index) << SCU_VIIT_ENTRY_LPVIE_SHIFT) | + SCU_VIIT_STATUS_ALL_VALID, + &iport->viit_registers->status); +} + +enum sas_linkrate sci_port_get_max_allowed_speed(struct isci_port *iport) +{ + u16 index; + struct isci_phy *iphy; + enum sas_linkrate max_allowed_speed = SAS_LINK_RATE_6_0_GBPS; + + /* + * Loop through all of the phys in this port and find the phy with the + * lowest maximum link rate. */ + for (index = 0; index < SCI_MAX_PHYS; index++) { + iphy = iport->phy_table[index]; + if (iphy && sci_port_active_phy(iport, iphy) && + iphy->max_negotiated_speed < max_allowed_speed) + max_allowed_speed = iphy->max_negotiated_speed; + } + + return max_allowed_speed; +} + +static void sci_port_suspend_port_task_scheduler(struct isci_port *iport) +{ + u32 pts_control_value; + + pts_control_value = readl(&iport->port_task_scheduler_registers->control); + pts_control_value |= SCU_PTSxCR_GEN_BIT(SUSPEND); + writel(pts_control_value, &iport->port_task_scheduler_registers->control); +} + +/** + * sci_port_post_dummy_request() - post dummy/workaround request + * @sci_port: port to post task + * + * Prevent the hardware scheduler from posting new requests to the front + * of the scheduler queue causing a starvation problem for currently + * ongoing requests. + * + */ +static void sci_port_post_dummy_request(struct isci_port *iport) +{ + struct isci_host *ihost = iport->owning_controller; + u16 tag = iport->reserved_tag; + struct scu_task_context *tc; + u32 command; + + tc = &ihost->task_context_table[ISCI_TAG_TCI(tag)]; + tc->abort = 0; + + command = SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + iport->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | + ISCI_TAG_TCI(tag); + + sci_controller_post_request(ihost, command); +} + +/** + * This routine will abort the dummy request. This will alow the hardware to + * power down parts of the silicon to save power. + * + * @sci_port: The port on which the task must be aborted. + * + */ +static void sci_port_abort_dummy_request(struct isci_port *iport) +{ + struct isci_host *ihost = iport->owning_controller; + u16 tag = iport->reserved_tag; + struct scu_task_context *tc; + u32 command; + + tc = &ihost->task_context_table[ISCI_TAG_TCI(tag)]; + tc->abort = 1; + + command = SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT | + iport->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | + ISCI_TAG_TCI(tag); + + sci_controller_post_request(ihost, command); +} + +/** + * + * @sci_port: This is the struct isci_port object to resume. + * + * This method will resume the port task scheduler for this port object. none + */ +static void +sci_port_resume_port_task_scheduler(struct isci_port *iport) +{ + u32 pts_control_value; + + pts_control_value = readl(&iport->port_task_scheduler_registers->control); + pts_control_value &= ~SCU_PTSxCR_GEN_BIT(SUSPEND); + writel(pts_control_value, &iport->port_task_scheduler_registers->control); +} + +static void sci_port_ready_substate_waiting_enter(struct sci_base_state_machine *sm) +{ + struct isci_port *iport = container_of(sm, typeof(*iport), sm); + + sci_port_suspend_port_task_scheduler(iport); + + iport->not_ready_reason = SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS; + + if (iport->active_phy_mask != 0) { + /* At least one of the phys on the port is ready */ + port_state_machine_change(iport, + SCI_PORT_SUB_OPERATIONAL); + } +} + +static void sci_port_ready_substate_operational_enter(struct sci_base_state_machine *sm) +{ + u32 index; + struct isci_port *iport = container_of(sm, typeof(*iport), sm); + struct isci_host *ihost = iport->owning_controller; + + isci_port_ready(ihost, iport); + + for (index = 0; index < SCI_MAX_PHYS; index++) { + if (iport->phy_table[index]) { + writel(iport->physical_port_index, + &iport->port_pe_configuration_register[ + iport->phy_table[index]->phy_index]); + } + } + + sci_port_update_viit_entry(iport); + + sci_port_resume_port_task_scheduler(iport); + + /* + * Post the dummy task for the port so the hardware can schedule + * io correctly + */ + sci_port_post_dummy_request(iport); +} + +static void sci_port_invalidate_dummy_remote_node(struct isci_port *iport) +{ + struct isci_host *ihost = iport->owning_controller; + u8 phys_index = iport->physical_port_index; + union scu_remote_node_context *rnc; + u16 rni = iport->reserved_rni; + u32 command; + + rnc = &ihost->remote_node_context_table[rni]; + + rnc->ssp.is_valid = false; + + /* ensure the preceding tc abort request has reached the + * controller and give it ample time to act before posting the rnc + * invalidate + */ + readl(&ihost->smu_registers->interrupt_status); /* flush */ + udelay(10); + + command = SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE | + phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni; + + sci_controller_post_request(ihost, command); +} + +/** + * + * @object: This is the object which is cast to a struct isci_port object. + * + * This method will perform the actions required by the struct isci_port on + * exiting the SCI_PORT_SUB_OPERATIONAL. This function reports + * the port not ready and suspends the port task scheduler. none + */ +static void sci_port_ready_substate_operational_exit(struct sci_base_state_machine *sm) +{ + struct isci_port *iport = container_of(sm, typeof(*iport), sm); + struct isci_host *ihost = iport->owning_controller; + + /* + * Kill the dummy task for this port if it has not yet posted + * the hardware will treat this as a NOP and just return abort + * complete. + */ + sci_port_abort_dummy_request(iport); + + isci_port_not_ready(ihost, iport); + + if (iport->ready_exit) + sci_port_invalidate_dummy_remote_node(iport); +} + +static void sci_port_ready_substate_configuring_enter(struct sci_base_state_machine *sm) +{ + struct isci_port *iport = container_of(sm, typeof(*iport), sm); + struct isci_host *ihost = iport->owning_controller; + + if (iport->active_phy_mask == 0) { + isci_port_not_ready(ihost, iport); + + port_state_machine_change(iport, + SCI_PORT_SUB_WAITING); + } else if (iport->started_request_count == 0) + port_state_machine_change(iport, + SCI_PORT_SUB_OPERATIONAL); +} + +static void sci_port_ready_substate_configuring_exit(struct sci_base_state_machine *sm) +{ + struct isci_port *iport = container_of(sm, typeof(*iport), sm); + + sci_port_suspend_port_task_scheduler(iport); + if (iport->ready_exit) + sci_port_invalidate_dummy_remote_node(iport); +} + +enum sci_status sci_port_start(struct isci_port *iport) +{ + struct isci_host *ihost = iport->owning_controller; + enum sci_status status = SCI_SUCCESS; + enum sci_port_states state; + u32 phy_mask; + + state = iport->sm.current_state_id; + if (state != SCI_PORT_STOPPED) { + dev_warn(sciport_to_dev(iport), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + if (iport->assigned_device_count > 0) { + /* TODO This is a start failure operation because + * there are still devices assigned to this port. + * There must be no devices assigned to a port on a + * start operation. + */ + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + if (iport->reserved_rni == SCU_DUMMY_INDEX) { + u16 rni = sci_remote_node_table_allocate_remote_node( + &ihost->available_remote_nodes, 1); + + if (rni != SCU_DUMMY_INDEX) + sci_port_construct_dummy_rnc(iport, rni); + else + status = SCI_FAILURE_INSUFFICIENT_RESOURCES; + iport->reserved_rni = rni; + } + + if (iport->reserved_tag == SCI_CONTROLLER_INVALID_IO_TAG) { + u16 tag; + + tag = isci_alloc_tag(ihost); + if (tag == SCI_CONTROLLER_INVALID_IO_TAG) + status = SCI_FAILURE_INSUFFICIENT_RESOURCES; + else + sci_port_construct_dummy_task(iport, tag); + iport->reserved_tag = tag; + } + + if (status == SCI_SUCCESS) { + phy_mask = sci_port_get_phys(iport); + + /* + * There are one or more phys assigned to this port. Make sure + * the port's phy mask is in fact legal and supported by the + * silicon. + */ + if (sci_port_is_phy_mask_valid(iport, phy_mask) == true) { + port_state_machine_change(iport, + SCI_PORT_READY); + + return SCI_SUCCESS; + } + status = SCI_FAILURE; + } + + if (status != SCI_SUCCESS) + sci_port_destroy_dummy_resources(iport); + + return status; +} + +enum sci_status sci_port_stop(struct isci_port *iport) +{ + enum sci_port_states state; + + state = iport->sm.current_state_id; + switch (state) { + case SCI_PORT_STOPPED: + return SCI_SUCCESS; + case SCI_PORT_SUB_WAITING: + case SCI_PORT_SUB_OPERATIONAL: + case SCI_PORT_SUB_CONFIGURING: + case SCI_PORT_RESETTING: + port_state_machine_change(iport, + SCI_PORT_STOPPING); + return SCI_SUCCESS; + default: + dev_warn(sciport_to_dev(iport), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } +} + +static enum sci_status sci_port_hard_reset(struct isci_port *iport, u32 timeout) +{ + enum sci_status status = SCI_FAILURE_INVALID_PHY; + struct isci_phy *iphy = NULL; + enum sci_port_states state; + u32 phy_index; + + state = iport->sm.current_state_id; + if (state != SCI_PORT_SUB_OPERATIONAL) { + dev_warn(sciport_to_dev(iport), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + /* Select a phy on which we can send the hard reset request. */ + for (phy_index = 0; phy_index < SCI_MAX_PHYS && !iphy; phy_index++) { + iphy = iport->phy_table[phy_index]; + if (iphy && !sci_port_active_phy(iport, iphy)) { + /* + * We found a phy but it is not ready select + * different phy + */ + iphy = NULL; + } + } + + /* If we have a phy then go ahead and start the reset procedure */ + if (!iphy) + return status; + status = sci_phy_reset(iphy); + + if (status != SCI_SUCCESS) + return status; + + sci_mod_timer(&iport->timer, timeout); + iport->not_ready_reason = SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED; + + port_state_machine_change(iport, SCI_PORT_RESETTING); + return SCI_SUCCESS; +} + +/** + * sci_port_add_phy() - + * @sci_port: This parameter specifies the port in which the phy will be added. + * @sci_phy: This parameter is the phy which is to be added to the port. + * + * This method will add a PHY to the selected port. This method returns an + * enum sci_status. SCI_SUCCESS the phy has been added to the port. Any other + * status is a failure to add the phy to the port. + */ +enum sci_status sci_port_add_phy(struct isci_port *iport, + struct isci_phy *iphy) +{ + enum sci_status status; + enum sci_port_states state; + + state = iport->sm.current_state_id; + switch (state) { + case SCI_PORT_STOPPED: { + struct sci_sas_address port_sas_address; + + /* Read the port assigned SAS Address if there is one */ + sci_port_get_sas_address(iport, &port_sas_address); + + if (port_sas_address.high != 0 && port_sas_address.low != 0) { + struct sci_sas_address phy_sas_address; + + /* Make sure that the PHY SAS Address matches the SAS Address + * for this port + */ + sci_phy_get_sas_address(iphy, &phy_sas_address); + + if (port_sas_address.high != phy_sas_address.high || + port_sas_address.low != phy_sas_address.low) + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + return sci_port_set_phy(iport, iphy); + } + case SCI_PORT_SUB_WAITING: + case SCI_PORT_SUB_OPERATIONAL: + status = sci_port_set_phy(iport, iphy); + + if (status != SCI_SUCCESS) + return status; + + sci_port_general_link_up_handler(iport, iphy, true); + iport->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; + port_state_machine_change(iport, SCI_PORT_SUB_CONFIGURING); + + return status; + case SCI_PORT_SUB_CONFIGURING: + status = sci_port_set_phy(iport, iphy); + + if (status != SCI_SUCCESS) + return status; + sci_port_general_link_up_handler(iport, iphy, true); + + /* Re-enter the configuring state since this may be the last phy in + * the port. + */ + port_state_machine_change(iport, + SCI_PORT_SUB_CONFIGURING); + return SCI_SUCCESS; + default: + dev_warn(sciport_to_dev(iport), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } +} + +/** + * sci_port_remove_phy() - + * @sci_port: This parameter specifies the port in which the phy will be added. + * @sci_phy: This parameter is the phy which is to be added to the port. + * + * This method will remove the PHY from the selected PORT. This method returns + * an enum sci_status. SCI_SUCCESS the phy has been removed from the port. Any + * other status is a failure to add the phy to the port. + */ +enum sci_status sci_port_remove_phy(struct isci_port *iport, + struct isci_phy *iphy) +{ + enum sci_status status; + enum sci_port_states state; + + state = iport->sm.current_state_id; + + switch (state) { + case SCI_PORT_STOPPED: + return sci_port_clear_phy(iport, iphy); + case SCI_PORT_SUB_OPERATIONAL: + status = sci_port_clear_phy(iport, iphy); + if (status != SCI_SUCCESS) + return status; + + sci_port_deactivate_phy(iport, iphy, true); + iport->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING; + port_state_machine_change(iport, + SCI_PORT_SUB_CONFIGURING); + return SCI_SUCCESS; + case SCI_PORT_SUB_CONFIGURING: + status = sci_port_clear_phy(iport, iphy); + + if (status != SCI_SUCCESS) + return status; + sci_port_deactivate_phy(iport, iphy, true); + + /* Re-enter the configuring state since this may be the last phy in + * the port + */ + port_state_machine_change(iport, + SCI_PORT_SUB_CONFIGURING); + return SCI_SUCCESS; + default: + dev_warn(sciport_to_dev(iport), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } +} + +enum sci_status sci_port_link_up(struct isci_port *iport, + struct isci_phy *iphy) +{ + enum sci_port_states state; + + state = iport->sm.current_state_id; + switch (state) { + case SCI_PORT_SUB_WAITING: + /* Since this is the first phy going link up for the port we + * can just enable it and continue + */ + sci_port_activate_phy(iport, iphy, true); + + port_state_machine_change(iport, + SCI_PORT_SUB_OPERATIONAL); + return SCI_SUCCESS; + case SCI_PORT_SUB_OPERATIONAL: + sci_port_general_link_up_handler(iport, iphy, true); + return SCI_SUCCESS; + case SCI_PORT_RESETTING: + /* TODO We should make sure that the phy that has gone + * link up is the same one on which we sent the reset. It is + * possible that the phy on which we sent the reset is not the + * one that has gone link up and we want to make sure that + * phy being reset comes back. Consider the case where a + * reset is sent but before the hardware processes the reset it + * get a link up on the port because of a hot plug event. + * because of the reset request this phy will go link down + * almost immediately. + */ + + /* In the resetting state we don't notify the user regarding + * link up and link down notifications. + */ + sci_port_general_link_up_handler(iport, iphy, false); + return SCI_SUCCESS; + default: + dev_warn(sciport_to_dev(iport), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } +} + +enum sci_status sci_port_link_down(struct isci_port *iport, + struct isci_phy *iphy) +{ + enum sci_port_states state; + + state = iport->sm.current_state_id; + switch (state) { + case SCI_PORT_SUB_OPERATIONAL: + sci_port_deactivate_phy(iport, iphy, true); + + /* If there are no active phys left in the port, then + * transition the port to the WAITING state until such time + * as a phy goes link up + */ + if (iport->active_phy_mask == 0) + port_state_machine_change(iport, + SCI_PORT_SUB_WAITING); + return SCI_SUCCESS; + case SCI_PORT_RESETTING: + /* In the resetting state we don't notify the user regarding + * link up and link down notifications. */ + sci_port_deactivate_phy(iport, iphy, false); + return SCI_SUCCESS; + default: + dev_warn(sciport_to_dev(iport), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } +} + +enum sci_status sci_port_start_io(struct isci_port *iport, + struct isci_remote_device *idev, + struct isci_request *ireq) +{ + enum sci_port_states state; + + state = iport->sm.current_state_id; + switch (state) { + case SCI_PORT_SUB_WAITING: + return SCI_FAILURE_INVALID_STATE; + case SCI_PORT_SUB_OPERATIONAL: + iport->started_request_count++; + return SCI_SUCCESS; + default: + dev_warn(sciport_to_dev(iport), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } +} + +enum sci_status sci_port_complete_io(struct isci_port *iport, + struct isci_remote_device *idev, + struct isci_request *ireq) +{ + enum sci_port_states state; + + state = iport->sm.current_state_id; + switch (state) { + case SCI_PORT_STOPPED: + dev_warn(sciport_to_dev(iport), + "%s: in wrong state: %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + case SCI_PORT_STOPPING: + sci_port_decrement_request_count(iport); + + if (iport->started_request_count == 0) + port_state_machine_change(iport, + SCI_PORT_STOPPED); + break; + case SCI_PORT_READY: + case SCI_PORT_RESETTING: + case SCI_PORT_FAILED: + case SCI_PORT_SUB_WAITING: + case SCI_PORT_SUB_OPERATIONAL: + sci_port_decrement_request_count(iport); + break; + case SCI_PORT_SUB_CONFIGURING: + sci_port_decrement_request_count(iport); + if (iport->started_request_count == 0) { + port_state_machine_change(iport, + SCI_PORT_SUB_OPERATIONAL); + } + break; + } + return SCI_SUCCESS; +} + +static void sci_port_enable_port_task_scheduler(struct isci_port *iport) +{ + u32 pts_control_value; + + /* enable the port task scheduler in a suspended state */ + pts_control_value = readl(&iport->port_task_scheduler_registers->control); + pts_control_value |= SCU_PTSxCR_GEN_BIT(ENABLE) | SCU_PTSxCR_GEN_BIT(SUSPEND); + writel(pts_control_value, &iport->port_task_scheduler_registers->control); +} + +static void sci_port_disable_port_task_scheduler(struct isci_port *iport) +{ + u32 pts_control_value; + + pts_control_value = readl(&iport->port_task_scheduler_registers->control); + pts_control_value &= + ~(SCU_PTSxCR_GEN_BIT(ENABLE) | SCU_PTSxCR_GEN_BIT(SUSPEND)); + writel(pts_control_value, &iport->port_task_scheduler_registers->control); +} + +static void sci_port_post_dummy_remote_node(struct isci_port *iport) +{ + struct isci_host *ihost = iport->owning_controller; + u8 phys_index = iport->physical_port_index; + union scu_remote_node_context *rnc; + u16 rni = iport->reserved_rni; + u32 command; + + rnc = &ihost->remote_node_context_table[rni]; + rnc->ssp.is_valid = true; + + command = SCU_CONTEXT_COMMAND_POST_RNC_32 | + phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni; + + sci_controller_post_request(ihost, command); + + /* ensure hardware has seen the post rnc command and give it + * ample time to act before sending the suspend + */ + readl(&ihost->smu_registers->interrupt_status); /* flush */ + udelay(10); + + command = SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX_RX | + phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni; + + sci_controller_post_request(ihost, command); +} + +static void sci_port_stopped_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_port *iport = container_of(sm, typeof(*iport), sm); + + if (iport->sm.previous_state_id == SCI_PORT_STOPPING) { + /* + * If we enter this state becasuse of a request to stop + * the port then we want to disable the hardwares port + * task scheduler. */ + sci_port_disable_port_task_scheduler(iport); + } +} + +static void sci_port_stopped_state_exit(struct sci_base_state_machine *sm) +{ + struct isci_port *iport = container_of(sm, typeof(*iport), sm); + + /* Enable and suspend the port task scheduler */ + sci_port_enable_port_task_scheduler(iport); +} + +static void sci_port_ready_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_port *iport = container_of(sm, typeof(*iport), sm); + struct isci_host *ihost = iport->owning_controller; + u32 prev_state; + + prev_state = iport->sm.previous_state_id; + if (prev_state == SCI_PORT_RESETTING) + isci_port_hard_reset_complete(iport, SCI_SUCCESS); + else + isci_port_not_ready(ihost, iport); + + /* Post and suspend the dummy remote node context for this port. */ + sci_port_post_dummy_remote_node(iport); + + /* Start the ready substate machine */ + port_state_machine_change(iport, + SCI_PORT_SUB_WAITING); +} + +static void sci_port_resetting_state_exit(struct sci_base_state_machine *sm) +{ + struct isci_port *iport = container_of(sm, typeof(*iport), sm); + + sci_del_timer(&iport->timer); +} + +static void sci_port_stopping_state_exit(struct sci_base_state_machine *sm) +{ + struct isci_port *iport = container_of(sm, typeof(*iport), sm); + + sci_del_timer(&iport->timer); + + sci_port_destroy_dummy_resources(iport); +} + +static void sci_port_failed_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_port *iport = container_of(sm, typeof(*iport), sm); + + isci_port_hard_reset_complete(iport, SCI_FAILURE_TIMEOUT); +} + +/* --------------------------------------------------------------------------- */ + +static const struct sci_base_state sci_port_state_table[] = { + [SCI_PORT_STOPPED] = { + .enter_state = sci_port_stopped_state_enter, + .exit_state = sci_port_stopped_state_exit + }, + [SCI_PORT_STOPPING] = { + .exit_state = sci_port_stopping_state_exit + }, + [SCI_PORT_READY] = { + .enter_state = sci_port_ready_state_enter, + }, + [SCI_PORT_SUB_WAITING] = { + .enter_state = sci_port_ready_substate_waiting_enter, + }, + [SCI_PORT_SUB_OPERATIONAL] = { + .enter_state = sci_port_ready_substate_operational_enter, + .exit_state = sci_port_ready_substate_operational_exit + }, + [SCI_PORT_SUB_CONFIGURING] = { + .enter_state = sci_port_ready_substate_configuring_enter, + .exit_state = sci_port_ready_substate_configuring_exit + }, + [SCI_PORT_RESETTING] = { + .exit_state = sci_port_resetting_state_exit + }, + [SCI_PORT_FAILED] = { + .enter_state = sci_port_failed_state_enter, + } +}; + +void sci_port_construct(struct isci_port *iport, u8 index, + struct isci_host *ihost) +{ + sci_init_sm(&iport->sm, sci_port_state_table, SCI_PORT_STOPPED); + + iport->logical_port_index = SCIC_SDS_DUMMY_PORT; + iport->physical_port_index = index; + iport->active_phy_mask = 0; + iport->ready_exit = false; + + iport->owning_controller = ihost; + + iport->started_request_count = 0; + iport->assigned_device_count = 0; + + iport->reserved_rni = SCU_DUMMY_INDEX; + iport->reserved_tag = SCI_CONTROLLER_INVALID_IO_TAG; + + sci_init_timer(&iport->timer, port_timeout); + + iport->port_task_scheduler_registers = NULL; + + for (index = 0; index < SCI_MAX_PHYS; index++) + iport->phy_table[index] = NULL; +} + +void isci_port_init(struct isci_port *iport, struct isci_host *ihost, int index) +{ + INIT_LIST_HEAD(&iport->remote_dev_list); + INIT_LIST_HEAD(&iport->domain_dev_list); + spin_lock_init(&iport->state_lock); + init_completion(&iport->start_complete); + iport->isci_host = ihost; + isci_port_change_state(iport, isci_freed); + atomic_set(&iport->event, 0); +} + +/** + * isci_port_get_state() - This function gets the status of the port object. + * @isci_port: This parameter points to the isci_port object + * + * status of the object as a isci_status enum. + */ +enum isci_status isci_port_get_state( + struct isci_port *isci_port) +{ + return isci_port->status; +} + +void sci_port_broadcast_change_received(struct isci_port *iport, struct isci_phy *iphy) +{ + struct isci_host *ihost = iport->owning_controller; + + /* notify the user. */ + isci_port_bc_change_received(ihost, iport, iphy); +} + +int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *iport, + struct isci_phy *iphy) +{ + unsigned long flags; + enum sci_status status; + int idx, ret = TMF_RESP_FUNC_COMPLETE; + + dev_dbg(&ihost->pdev->dev, "%s: iport = %p\n", + __func__, iport); + + init_completion(&iport->hard_reset_complete); + + spin_lock_irqsave(&ihost->scic_lock, flags); + + #define ISCI_PORT_RESET_TIMEOUT SCIC_SDS_SIGNATURE_FIS_TIMEOUT + status = sci_port_hard_reset(iport, ISCI_PORT_RESET_TIMEOUT); + + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + if (status == SCI_SUCCESS) { + wait_for_completion(&iport->hard_reset_complete); + + dev_dbg(&ihost->pdev->dev, + "%s: iport = %p; hard reset completion\n", + __func__, iport); + + if (iport->hard_reset_status != SCI_SUCCESS) + ret = TMF_RESP_FUNC_FAILED; + } else { + ret = TMF_RESP_FUNC_FAILED; + + dev_err(&ihost->pdev->dev, + "%s: iport = %p; sci_port_hard_reset call" + " failed 0x%x\n", + __func__, iport, status); + + } + + /* If the hard reset for the port has failed, consider this + * the same as link failures on all phys in the port. + */ + if (ret != TMF_RESP_FUNC_COMPLETE) { + + dev_err(&ihost->pdev->dev, + "%s: iport = %p; hard reset failed " + "(0x%x) - driving explicit link fail for all phys\n", + __func__, iport, iport->hard_reset_status); + + /* Down all phys in the port. */ + spin_lock_irqsave(&ihost->scic_lock, flags); + for (idx = 0; idx < SCI_MAX_PHYS; ++idx) { + struct isci_phy *iphy = iport->phy_table[idx]; + + if (!iphy) + continue; + sci_phy_stop(iphy); + sci_phy_start(iphy); + } + spin_unlock_irqrestore(&ihost->scic_lock, flags); + } + return ret; +} + +/** + * isci_port_deformed() - This function is called by libsas when a port becomes + * inactive. + * @phy: This parameter specifies the libsas phy with the inactive port. + * + */ +void isci_port_deformed(struct asd_sas_phy *phy) +{ + pr_debug("%s: sas_phy = %p\n", __func__, phy); +} + +/** + * isci_port_formed() - This function is called by libsas when a port becomes + * active. + * @phy: This parameter specifies the libsas phy with the active port. + * + */ +void isci_port_formed(struct asd_sas_phy *phy) +{ + pr_debug("%s: sas_phy = %p, sas_port = %p\n", __func__, phy, phy->port); +} diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h new file mode 100644 index 000000000000..b50ecd4e8f9c --- /dev/null +++ b/drivers/scsi/isci/port.h @@ -0,0 +1,306 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _ISCI_PORT_H_ +#define _ISCI_PORT_H_ + +#include <scsi/libsas.h> +#include "isci.h" +#include "sas.h" +#include "phy.h" + +#define SCIC_SDS_DUMMY_PORT 0xFF + +struct isci_phy; +struct isci_host; + +enum isci_status { + isci_freed = 0x00, + isci_starting = 0x01, + isci_ready = 0x02, + isci_ready_for_io = 0x03, + isci_stopping = 0x04, + isci_stopped = 0x05, +}; + +/** + * struct isci_port - isci direct attached sas port object + * @event: counts bcns and port stop events (for bcn filtering) + * @ready_exit: several states constitute 'ready'. When exiting ready we + * need to take extra port-teardown actions that are + * skipped when exiting to another 'ready' state. + * @logical_port_index: software port index + * @physical_port_index: hardware port index + * @active_phy_mask: identifies phy members + * @reserved_tag: + * @reserved_rni: reserver for port task scheduler workaround + * @started_request_count: reference count for outstanding commands + * @not_ready_reason: set during state transitions and notified + * @timer: timeout start/stop operations + */ +struct isci_port { + enum isci_status status; + #define IPORT_BCN_BLOCKED 0 + #define IPORT_BCN_PENDING 1 + unsigned long flags; + atomic_t event; + struct isci_host *isci_host; + struct asd_sas_port sas_port; + struct list_head remote_dev_list; + spinlock_t state_lock; + struct list_head domain_dev_list; + struct completion start_complete; + struct completion hard_reset_complete; + enum sci_status hard_reset_status; + struct sci_base_state_machine sm; + bool ready_exit; + u8 logical_port_index; + u8 physical_port_index; + u8 active_phy_mask; + u16 reserved_rni; + u16 reserved_tag; + u32 started_request_count; + u32 assigned_device_count; + u32 not_ready_reason; + struct isci_phy *phy_table[SCI_MAX_PHYS]; + struct isci_host *owning_controller; + struct sci_timer timer; + struct scu_port_task_scheduler_registers __iomem *port_task_scheduler_registers; + /* XXX rework: only one register, no need to replicate per-port */ + u32 __iomem *port_pe_configuration_register; + struct scu_viit_entry __iomem *viit_registers; +}; + +enum sci_port_not_ready_reason_code { + SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS, + SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED, + SCIC_PORT_NOT_READY_INVALID_PORT_CONFIGURATION, + SCIC_PORT_NOT_READY_RECONFIGURING, + + SCIC_PORT_NOT_READY_REASON_CODE_MAX +}; + +struct sci_port_end_point_properties { + struct sci_sas_address sas_address; + struct sci_phy_proto protocols; +}; + +struct sci_port_properties { + u32 index; + struct sci_port_end_point_properties local; + struct sci_port_end_point_properties remote; + u32 phy_mask; +}; + +/** + * enum sci_port_states - This enumeration depicts all the states for the + * common port state machine. + * + * + */ +enum sci_port_states { + /** + * This state indicates that the port has successfully been stopped. + * In this state no new IO operations are permitted. + * This state is entered from the STOPPING state. + */ + SCI_PORT_STOPPED, + + /** + * This state indicates that the port is in the process of stopping. + * In this state no new IO operations are permitted, but existing IO + * operations are allowed to complete. + * This state is entered from the READY state. + */ + SCI_PORT_STOPPING, + + /** + * This state indicates the port is now ready. Thus, the user is + * able to perform IO operations on this port. + * This state is entered from the STARTING state. + */ + SCI_PORT_READY, + + /** + * The substate where the port is started and ready but has no + * active phys. + */ + SCI_PORT_SUB_WAITING, + + /** + * The substate where the port is started and ready and there is + * at least one phy operational. + */ + SCI_PORT_SUB_OPERATIONAL, + + /** + * The substate where the port is started and there was an + * add/remove phy event. This state is only used in Automatic + * Port Configuration Mode (APC) + */ + SCI_PORT_SUB_CONFIGURING, + + /** + * This state indicates the port is in the process of performing a hard + * reset. Thus, the user is unable to perform IO operations on this + * port. + * This state is entered from the READY state. + */ + SCI_PORT_RESETTING, + + /** + * This state indicates the port has failed a reset request. This state + * is entered when a port reset request times out. + * This state is entered from the RESETTING state. + */ + SCI_PORT_FAILED, + + +}; + +static inline void sci_port_decrement_request_count(struct isci_port *iport) +{ + if (WARN_ONCE(iport->started_request_count == 0, + "%s: tried to decrement started_request_count past 0!?", + __func__)) + /* pass */; + else + iport->started_request_count--; +} + +#define sci_port_active_phy(port, phy) \ + (((port)->active_phy_mask & (1 << (phy)->phy_index)) != 0) + +void sci_port_construct( + struct isci_port *iport, + u8 port_index, + struct isci_host *ihost); + +enum sci_status sci_port_start(struct isci_port *iport); +enum sci_status sci_port_stop(struct isci_port *iport); + +enum sci_status sci_port_add_phy( + struct isci_port *iport, + struct isci_phy *iphy); + +enum sci_status sci_port_remove_phy( + struct isci_port *iport, + struct isci_phy *iphy); + +void sci_port_setup_transports( + struct isci_port *iport, + u32 device_id); + +void isci_port_bcn_enable(struct isci_host *, struct isci_port *); + +void sci_port_deactivate_phy( + struct isci_port *iport, + struct isci_phy *iphy, + bool do_notify_user); + +bool sci_port_link_detected( + struct isci_port *iport, + struct isci_phy *iphy); + +enum sci_status sci_port_link_up(struct isci_port *iport, + struct isci_phy *iphy); +enum sci_status sci_port_link_down(struct isci_port *iport, + struct isci_phy *iphy); + +struct isci_request; +struct isci_remote_device; +enum sci_status sci_port_start_io( + struct isci_port *iport, + struct isci_remote_device *idev, + struct isci_request *ireq); + +enum sci_status sci_port_complete_io( + struct isci_port *iport, + struct isci_remote_device *idev, + struct isci_request *ireq); + +enum sas_linkrate sci_port_get_max_allowed_speed( + struct isci_port *iport); + +void sci_port_broadcast_change_received( + struct isci_port *iport, + struct isci_phy *iphy); + +bool sci_port_is_valid_phy_assignment( + struct isci_port *iport, + u32 phy_index); + +void sci_port_get_sas_address( + struct isci_port *iport, + struct sci_sas_address *sas_address); + +void sci_port_get_attached_sas_address( + struct isci_port *iport, + struct sci_sas_address *sas_address); + +enum isci_status isci_port_get_state( + struct isci_port *isci_port); + +void isci_port_formed(struct asd_sas_phy *); +void isci_port_deformed(struct asd_sas_phy *); + +void isci_port_init( + struct isci_port *port, + struct isci_host *host, + int index); + +int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *iport, + struct isci_phy *iphy); +#endif /* !defined(_ISCI_PORT_H_) */ diff --git a/drivers/scsi/isci/port_config.c b/drivers/scsi/isci/port_config.c new file mode 100644 index 000000000000..486b113c634a --- /dev/null +++ b/drivers/scsi/isci/port_config.c @@ -0,0 +1,754 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "host.h" + +#define SCIC_SDS_MPC_RECONFIGURATION_TIMEOUT (10) +#define SCIC_SDS_APC_RECONFIGURATION_TIMEOUT (10) +#define SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION (100) + +enum SCIC_SDS_APC_ACTIVITY { + SCIC_SDS_APC_SKIP_PHY, + SCIC_SDS_APC_ADD_PHY, + SCIC_SDS_APC_START_TIMER, + + SCIC_SDS_APC_ACTIVITY_MAX +}; + +/* + * ****************************************************************************** + * General port configuration agent routines + * ****************************************************************************** */ + +/** + * + * @address_one: A SAS Address to be compared. + * @address_two: A SAS Address to be compared. + * + * Compare the two SAS Address and if SAS Address One is greater than SAS + * Address Two then return > 0 else if SAS Address One is less than SAS Address + * Two return < 0 Otherwise they are the same return 0 A signed value of x > 0 + * > y where x is returned for Address One > Address Two y is returned for + * Address One < Address Two 0 is returned ofr Address One = Address Two + */ +static s32 sci_sas_address_compare( + struct sci_sas_address address_one, + struct sci_sas_address address_two) +{ + if (address_one.high > address_two.high) { + return 1; + } else if (address_one.high < address_two.high) { + return -1; + } else if (address_one.low > address_two.low) { + return 1; + } else if (address_one.low < address_two.low) { + return -1; + } + + /* The two SAS Address must be identical */ + return 0; +} + +/** + * + * @controller: The controller object used for the port search. + * @phy: The phy object to match. + * + * This routine will find a matching port for the phy. This means that the + * port and phy both have the same broadcast sas address and same received sas + * address. The port address or the NULL if there is no matching + * port. port address if the port can be found to match the phy. + * NULL if there is no matching port for the phy. + */ +static struct isci_port *sci_port_configuration_agent_find_port( + struct isci_host *ihost, + struct isci_phy *iphy) +{ + u8 i; + struct sci_sas_address port_sas_address; + struct sci_sas_address port_attached_device_address; + struct sci_sas_address phy_sas_address; + struct sci_sas_address phy_attached_device_address; + + /* + * Since this phy can be a member of a wide port check to see if one or + * more phys match the sent and received SAS address as this phy in which + * case it should participate in the same port. + */ + sci_phy_get_sas_address(iphy, &phy_sas_address); + sci_phy_get_attached_sas_address(iphy, &phy_attached_device_address); + + for (i = 0; i < ihost->logical_port_entries; i++) { + struct isci_port *iport = &ihost->ports[i]; + + sci_port_get_sas_address(iport, &port_sas_address); + sci_port_get_attached_sas_address(iport, &port_attached_device_address); + + if (sci_sas_address_compare(port_sas_address, phy_sas_address) == 0 && + sci_sas_address_compare(port_attached_device_address, phy_attached_device_address) == 0) + return iport; + } + + return NULL; +} + +/** + * + * @controller: This is the controller object that contains the port agent + * @port_agent: This is the port configruation agent for the controller. + * + * This routine will validate the port configuration is correct for the SCU + * hardware. The SCU hardware allows for port configurations as follows. LP0 + * -> (PE0), (PE0, PE1), (PE0, PE1, PE2, PE3) LP1 -> (PE1) LP2 -> (PE2), (PE2, + * PE3) LP3 -> (PE3) enum sci_status SCI_SUCCESS the port configuration is valid for + * this port configuration agent. SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION + * the port configuration is not valid for this port configuration agent. + */ +static enum sci_status sci_port_configuration_agent_validate_ports( + struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent) +{ + struct sci_sas_address first_address; + struct sci_sas_address second_address; + + /* + * Sanity check the max ranges for all the phys the max index + * is always equal to the port range index */ + if (port_agent->phy_valid_port_range[0].max_index != 0 || + port_agent->phy_valid_port_range[1].max_index != 1 || + port_agent->phy_valid_port_range[2].max_index != 2 || + port_agent->phy_valid_port_range[3].max_index != 3) + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + + /* + * This is a request to configure a single x4 port or at least attempt + * to make all the phys into a single port */ + if (port_agent->phy_valid_port_range[0].min_index == 0 && + port_agent->phy_valid_port_range[1].min_index == 0 && + port_agent->phy_valid_port_range[2].min_index == 0 && + port_agent->phy_valid_port_range[3].min_index == 0) + return SCI_SUCCESS; + + /* + * This is a degenerate case where phy 1 and phy 2 are assigned + * to the same port this is explicitly disallowed by the hardware + * unless they are part of the same x4 port and this condition was + * already checked above. */ + if (port_agent->phy_valid_port_range[2].min_index == 1) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + /* + * PE0 and PE3 can never have the same SAS Address unless they + * are part of the same x4 wide port and we have already checked + * for this condition. */ + sci_phy_get_sas_address(&ihost->phys[0], &first_address); + sci_phy_get_sas_address(&ihost->phys[3], &second_address); + + if (sci_sas_address_compare(first_address, second_address) == 0) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + /* + * PE0 and PE1 are configured into a 2x1 ports make sure that the + * SAS Address for PE0 and PE2 are different since they can not be + * part of the same port. */ + if (port_agent->phy_valid_port_range[0].min_index == 0 && + port_agent->phy_valid_port_range[1].min_index == 1) { + sci_phy_get_sas_address(&ihost->phys[0], &first_address); + sci_phy_get_sas_address(&ihost->phys[2], &second_address); + + if (sci_sas_address_compare(first_address, second_address) == 0) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + } + + /* + * PE2 and PE3 are configured into a 2x1 ports make sure that the + * SAS Address for PE1 and PE3 are different since they can not be + * part of the same port. */ + if (port_agent->phy_valid_port_range[2].min_index == 2 && + port_agent->phy_valid_port_range[3].min_index == 3) { + sci_phy_get_sas_address(&ihost->phys[1], &first_address); + sci_phy_get_sas_address(&ihost->phys[3], &second_address); + + if (sci_sas_address_compare(first_address, second_address) == 0) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + } + + return SCI_SUCCESS; +} + +/* + * ****************************************************************************** + * Manual port configuration agent routines + * ****************************************************************************** */ + +/* verify all of the phys in the same port are using the same SAS address */ +static enum sci_status +sci_mpc_agent_validate_phy_configuration(struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent) +{ + u32 phy_mask; + u32 assigned_phy_mask; + struct sci_sas_address sas_address; + struct sci_sas_address phy_assigned_address; + u8 port_index; + u8 phy_index; + + assigned_phy_mask = 0; + sas_address.high = 0; + sas_address.low = 0; + + for (port_index = 0; port_index < SCI_MAX_PORTS; port_index++) { + phy_mask = ihost->oem_parameters.ports[port_index].phy_mask; + + if (!phy_mask) + continue; + /* + * Make sure that one or more of the phys were not already assinged to + * a different port. */ + if ((phy_mask & ~assigned_phy_mask) == 0) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + /* Find the starting phy index for this round through the loop */ + for (phy_index = 0; phy_index < SCI_MAX_PHYS; phy_index++) { + if ((phy_mask & (1 << phy_index)) == 0) + continue; + sci_phy_get_sas_address(&ihost->phys[phy_index], + &sas_address); + + /* + * The phy_index can be used as the starting point for the + * port range since the hardware starts all logical ports + * the same as the PE index. */ + port_agent->phy_valid_port_range[phy_index].min_index = port_index; + port_agent->phy_valid_port_range[phy_index].max_index = phy_index; + + if (phy_index != port_index) { + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + break; + } + + /* + * See how many additional phys are being added to this logical port. + * Note: We have not moved the current phy_index so we will actually + * compare the startting phy with itself. + * This is expected and required to add the phy to the port. */ + while (phy_index < SCI_MAX_PHYS) { + if ((phy_mask & (1 << phy_index)) == 0) + continue; + sci_phy_get_sas_address(&ihost->phys[phy_index], + &phy_assigned_address); + + if (sci_sas_address_compare(sas_address, phy_assigned_address) != 0) { + /* + * The phy mask specified that this phy is part of the same port + * as the starting phy and it is not so fail this configuration */ + return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION; + } + + port_agent->phy_valid_port_range[phy_index].min_index = port_index; + port_agent->phy_valid_port_range[phy_index].max_index = phy_index; + + sci_port_add_phy(&ihost->ports[port_index], + &ihost->phys[phy_index]); + + assigned_phy_mask |= (1 << phy_index); + } + + phy_index++; + } + + return sci_port_configuration_agent_validate_ports(ihost, port_agent); +} + +static void mpc_agent_timeout(unsigned long data) +{ + u8 index; + struct sci_timer *tmr = (struct sci_timer *)data; + struct sci_port_configuration_agent *port_agent; + struct isci_host *ihost; + unsigned long flags; + u16 configure_phy_mask; + + port_agent = container_of(tmr, typeof(*port_agent), timer); + ihost = container_of(port_agent, typeof(*ihost), port_agent); + + spin_lock_irqsave(&ihost->scic_lock, flags); + + if (tmr->cancel) + goto done; + + port_agent->timer_pending = false; + + /* Find the mask of phys that are reported read but as yet unconfigured into a port */ + configure_phy_mask = ~port_agent->phy_configured_mask & port_agent->phy_ready_mask; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + struct isci_phy *iphy = &ihost->phys[index]; + + if (configure_phy_mask & (1 << index)) { + port_agent->link_up_handler(ihost, port_agent, + phy_get_non_dummy_port(iphy), + iphy); + } + } + +done: + spin_unlock_irqrestore(&ihost->scic_lock, flags); +} + +static void sci_mpc_agent_link_up(struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent, + struct isci_port *iport, + struct isci_phy *iphy) +{ + /* If the port is NULL then the phy was not assigned to a port. + * This is because the phy was not given the same SAS Address as + * the other PHYs in the port. + */ + if (!iport) + return; + + port_agent->phy_ready_mask |= (1 << iphy->phy_index); + sci_port_link_up(iport, iphy); + if ((iport->active_phy_mask & (1 << iphy->phy_index))) + port_agent->phy_configured_mask |= (1 << iphy->phy_index); +} + +/** + * + * @controller: This is the controller object that receives the link down + * notification. + * @port: This is the port object associated with the phy. If the is no + * associated port this is an NULL. The port is an invalid + * handle only if the phy was never port of this port. This happens when + * the phy is not broadcasting the same SAS address as the other phys in the + * assigned port. + * @phy: This is the phy object which has gone link down. + * + * This function handles the manual port configuration link down notifications. + * Since all ports and phys are associated at initialization time we just turn + * around and notifiy the port object of the link down event. If this PHY is + * not associated with a port there is no action taken. Is it possible to get a + * link down notification from a phy that has no assocoated port? + */ +static void sci_mpc_agent_link_down( + struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent, + struct isci_port *iport, + struct isci_phy *iphy) +{ + if (iport != NULL) { + /* + * If we can form a new port from the remainder of the phys + * then we want to start the timer to allow the SCI User to + * cleanup old devices and rediscover the port before + * rebuilding the port with the phys that remain in the ready + * state. + */ + port_agent->phy_ready_mask &= ~(1 << iphy->phy_index); + port_agent->phy_configured_mask &= ~(1 << iphy->phy_index); + + /* + * Check to see if there are more phys waiting to be + * configured into a port. If there are allow the SCI User + * to tear down this port, if necessary, and then reconstruct + * the port after the timeout. + */ + if ((port_agent->phy_configured_mask == 0x0000) && + (port_agent->phy_ready_mask != 0x0000) && + !port_agent->timer_pending) { + port_agent->timer_pending = true; + + sci_mod_timer(&port_agent->timer, + SCIC_SDS_MPC_RECONFIGURATION_TIMEOUT); + } + + sci_port_link_down(iport, iphy); + } +} + +/* verify phys are assigned a valid SAS address for automatic port + * configuration mode. + */ +static enum sci_status +sci_apc_agent_validate_phy_configuration(struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent) +{ + u8 phy_index; + u8 port_index; + struct sci_sas_address sas_address; + struct sci_sas_address phy_assigned_address; + + phy_index = 0; + + while (phy_index < SCI_MAX_PHYS) { + port_index = phy_index; + + /* Get the assigned SAS Address for the first PHY on the controller. */ + sci_phy_get_sas_address(&ihost->phys[phy_index], + &sas_address); + + while (++phy_index < SCI_MAX_PHYS) { + sci_phy_get_sas_address(&ihost->phys[phy_index], + &phy_assigned_address); + + /* Verify each of the SAS address are all the same for every PHY */ + if (sci_sas_address_compare(sas_address, phy_assigned_address) == 0) { + port_agent->phy_valid_port_range[phy_index].min_index = port_index; + port_agent->phy_valid_port_range[phy_index].max_index = phy_index; + } else { + port_agent->phy_valid_port_range[phy_index].min_index = phy_index; + port_agent->phy_valid_port_range[phy_index].max_index = phy_index; + break; + } + } + } + + return sci_port_configuration_agent_validate_ports(ihost, port_agent); +} + +static void sci_apc_agent_configure_ports(struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent, + struct isci_phy *iphy, + bool start_timer) +{ + u8 port_index; + enum sci_status status; + struct isci_port *iport; + enum SCIC_SDS_APC_ACTIVITY apc_activity = SCIC_SDS_APC_SKIP_PHY; + + iport = sci_port_configuration_agent_find_port(ihost, iphy); + + if (iport) { + if (sci_port_is_valid_phy_assignment(iport, iphy->phy_index)) + apc_activity = SCIC_SDS_APC_ADD_PHY; + else + apc_activity = SCIC_SDS_APC_SKIP_PHY; + } else { + /* + * There is no matching Port for this PHY so lets search through the + * Ports and see if we can add the PHY to its own port or maybe start + * the timer and wait to see if a wider port can be made. + * + * Note the break when we reach the condition of the port id == phy id */ + for (port_index = port_agent->phy_valid_port_range[iphy->phy_index].min_index; + port_index <= port_agent->phy_valid_port_range[iphy->phy_index].max_index; + port_index++) { + + iport = &ihost->ports[port_index]; + + /* First we must make sure that this PHY can be added to this Port. */ + if (sci_port_is_valid_phy_assignment(iport, iphy->phy_index)) { + /* + * Port contains a PHY with a greater PHY ID than the current + * PHY that has gone link up. This phy can not be part of any + * port so skip it and move on. */ + if (iport->active_phy_mask > (1 << iphy->phy_index)) { + apc_activity = SCIC_SDS_APC_SKIP_PHY; + break; + } + + /* + * We have reached the end of our Port list and have not found + * any reason why we should not either add the PHY to the port + * or wait for more phys to become active. */ + if (iport->physical_port_index == iphy->phy_index) { + /* + * The Port either has no active PHYs. + * Consider that if the port had any active PHYs we would have + * or active PHYs with + * a lower PHY Id than this PHY. */ + if (apc_activity != SCIC_SDS_APC_START_TIMER) { + apc_activity = SCIC_SDS_APC_ADD_PHY; + } + + break; + } + + /* + * The current Port has no active PHYs and this PHY could be part + * of this Port. Since we dont know as yet setup to start the + * timer and see if there is a better configuration. */ + if (iport->active_phy_mask == 0) { + apc_activity = SCIC_SDS_APC_START_TIMER; + } + } else if (iport->active_phy_mask != 0) { + /* + * The Port has an active phy and the current Phy can not + * participate in this port so skip the PHY and see if + * there is a better configuration. */ + apc_activity = SCIC_SDS_APC_SKIP_PHY; + } + } + } + + /* + * Check to see if the start timer operations should instead map to an + * add phy operation. This is caused because we have been waiting to + * add a phy to a port but could not becuase the automatic port + * configuration engine had a choice of possible ports for the phy. + * Since we have gone through a timeout we are going to restrict the + * choice to the smallest possible port. */ + if ( + (start_timer == false) + && (apc_activity == SCIC_SDS_APC_START_TIMER) + ) { + apc_activity = SCIC_SDS_APC_ADD_PHY; + } + + switch (apc_activity) { + case SCIC_SDS_APC_ADD_PHY: + status = sci_port_add_phy(iport, iphy); + + if (status == SCI_SUCCESS) { + port_agent->phy_configured_mask |= (1 << iphy->phy_index); + } + break; + + case SCIC_SDS_APC_START_TIMER: + /* + * This can occur for either a link down event, or a link + * up event where we cannot yet tell the port to which a + * phy belongs. + */ + if (port_agent->timer_pending) + sci_del_timer(&port_agent->timer); + + port_agent->timer_pending = true; + sci_mod_timer(&port_agent->timer, + SCIC_SDS_APC_WAIT_LINK_UP_NOTIFICATION); + break; + + case SCIC_SDS_APC_SKIP_PHY: + default: + /* do nothing the PHY can not be made part of a port at this time. */ + break; + } +} + +/** + * sci_apc_agent_link_up - handle apc link up events + * @scic: This is the controller object that receives the link up + * notification. + * @sci_port: This is the port object associated with the phy. If the is no + * associated port this is an NULL. + * @sci_phy: This is the phy object which has gone link up. + * + * This method handles the automatic port configuration for link up + * notifications. Is it possible to get a link down notification from a phy + * that has no assocoated port? + */ +static void sci_apc_agent_link_up(struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent, + struct isci_port *iport, + struct isci_phy *iphy) +{ + u8 phy_index = iphy->phy_index; + + if (!iport) { + /* the phy is not the part of this port */ + port_agent->phy_ready_mask |= 1 << phy_index; + sci_apc_agent_configure_ports(ihost, port_agent, iphy, true); + } else { + /* the phy is already the part of the port */ + u32 port_state = iport->sm.current_state_id; + + /* if the PORT'S state is resetting then the link up is from + * port hard reset in this case, we need to tell the port + * that link up is recieved + */ + BUG_ON(port_state != SCI_PORT_RESETTING); + port_agent->phy_ready_mask |= 1 << phy_index; + sci_port_link_up(iport, iphy); + } +} + +/** + * + * @controller: This is the controller object that receives the link down + * notification. + * @iport: This is the port object associated with the phy. If the is no + * associated port this is an NULL. + * @iphy: This is the phy object which has gone link down. + * + * This method handles the automatic port configuration link down + * notifications. not associated with a port there is no action taken. Is it + * possible to get a link down notification from a phy that has no assocoated + * port? + */ +static void sci_apc_agent_link_down( + struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent, + struct isci_port *iport, + struct isci_phy *iphy) +{ + port_agent->phy_ready_mask &= ~(1 << iphy->phy_index); + + if (!iport) + return; + if (port_agent->phy_configured_mask & (1 << iphy->phy_index)) { + enum sci_status status; + + status = sci_port_remove_phy(iport, iphy); + + if (status == SCI_SUCCESS) + port_agent->phy_configured_mask &= ~(1 << iphy->phy_index); + } +} + +/* configure the phys into ports when the timer fires */ +static void apc_agent_timeout(unsigned long data) +{ + u32 index; + struct sci_timer *tmr = (struct sci_timer *)data; + struct sci_port_configuration_agent *port_agent; + struct isci_host *ihost; + unsigned long flags; + u16 configure_phy_mask; + + port_agent = container_of(tmr, typeof(*port_agent), timer); + ihost = container_of(port_agent, typeof(*ihost), port_agent); + + spin_lock_irqsave(&ihost->scic_lock, flags); + + if (tmr->cancel) + goto done; + + port_agent->timer_pending = false; + + configure_phy_mask = ~port_agent->phy_configured_mask & port_agent->phy_ready_mask; + + if (!configure_phy_mask) + return; + + for (index = 0; index < SCI_MAX_PHYS; index++) { + if ((configure_phy_mask & (1 << index)) == 0) + continue; + + sci_apc_agent_configure_ports(ihost, port_agent, + &ihost->phys[index], false); + } + +done: + spin_unlock_irqrestore(&ihost->scic_lock, flags); +} + +/* + * ****************************************************************************** + * Public port configuration agent routines + * ****************************************************************************** */ + +/** + * + * + * This method will construct the port configuration agent for operation. This + * call is universal for both manual port configuration and automatic port + * configuration modes. + */ +void sci_port_configuration_agent_construct( + struct sci_port_configuration_agent *port_agent) +{ + u32 index; + + port_agent->phy_configured_mask = 0x00; + port_agent->phy_ready_mask = 0x00; + + port_agent->link_up_handler = NULL; + port_agent->link_down_handler = NULL; + + port_agent->timer_pending = false; + + for (index = 0; index < SCI_MAX_PORTS; index++) { + port_agent->phy_valid_port_range[index].min_index = 0; + port_agent->phy_valid_port_range[index].max_index = 0; + } +} + +enum sci_status sci_port_configuration_agent_initialize( + struct isci_host *ihost, + struct sci_port_configuration_agent *port_agent) +{ + enum sci_status status; + enum sci_port_configuration_mode mode; + + mode = ihost->oem_parameters.controller.mode_type; + + if (mode == SCIC_PORT_MANUAL_CONFIGURATION_MODE) { + status = sci_mpc_agent_validate_phy_configuration( + ihost, port_agent); + + port_agent->link_up_handler = sci_mpc_agent_link_up; + port_agent->link_down_handler = sci_mpc_agent_link_down; + + sci_init_timer(&port_agent->timer, mpc_agent_timeout); + } else { + status = sci_apc_agent_validate_phy_configuration( + ihost, port_agent); + + port_agent->link_up_handler = sci_apc_agent_link_up; + port_agent->link_down_handler = sci_apc_agent_link_down; + + sci_init_timer(&port_agent->timer, apc_agent_timeout); + } + + return status; +} diff --git a/drivers/scsi/isci/probe_roms.c b/drivers/scsi/isci/probe_roms.c new file mode 100644 index 000000000000..b5f4341de243 --- /dev/null +++ b/drivers/scsi/isci/probe_roms.c @@ -0,0 +1,243 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + */ + +/* probe_roms - scan for oem parameters */ + +#include <linux/kernel.h> +#include <linux/firmware.h> +#include <linux/uaccess.h> +#include <linux/efi.h> +#include <asm/probe_roms.h> + +#include "isci.h" +#include "task.h" +#include "probe_roms.h" + +static efi_char16_t isci_efivar_name[] = { + 'R', 's', 't', 'S', 'c', 'u', 'O' +}; + +struct isci_orom *isci_request_oprom(struct pci_dev *pdev) +{ + void __iomem *oprom = pci_map_biosrom(pdev); + struct isci_orom *rom = NULL; + size_t len, i; + int j; + char oem_sig[4]; + struct isci_oem_hdr oem_hdr; + u8 *tmp, sum; + + if (!oprom) + return NULL; + + len = pci_biosrom_size(pdev); + rom = devm_kzalloc(&pdev->dev, sizeof(*rom), GFP_KERNEL); + if (!rom) { + dev_warn(&pdev->dev, + "Unable to allocate memory for orom\n"); + return NULL; + } + + for (i = 0; i < len && rom; i += ISCI_OEM_SIG_SIZE) { + memcpy_fromio(oem_sig, oprom + i, ISCI_OEM_SIG_SIZE); + + /* we think we found the OEM table */ + if (memcmp(oem_sig, ISCI_OEM_SIG, ISCI_OEM_SIG_SIZE) == 0) { + size_t copy_len; + + memcpy_fromio(&oem_hdr, oprom + i, sizeof(oem_hdr)); + + copy_len = min(oem_hdr.len - sizeof(oem_hdr), + sizeof(*rom)); + + memcpy_fromio(rom, + oprom + i + sizeof(oem_hdr), + copy_len); + + /* calculate checksum */ + tmp = (u8 *)&oem_hdr; + for (j = 0, sum = 0; j < sizeof(oem_hdr); j++, tmp++) + sum += *tmp; + + tmp = (u8 *)rom; + for (j = 0; j < sizeof(*rom); j++, tmp++) + sum += *tmp; + + if (sum != 0) { + dev_warn(&pdev->dev, + "OEM table checksum failed\n"); + continue; + } + + /* keep going if that's not the oem param table */ + if (memcmp(rom->hdr.signature, + ISCI_ROM_SIG, + ISCI_ROM_SIG_SIZE) != 0) + continue; + + dev_info(&pdev->dev, + "OEM parameter table found in OROM\n"); + break; + } + } + + if (i >= len) { + dev_err(&pdev->dev, "oprom parse error\n"); + devm_kfree(&pdev->dev, rom); + rom = NULL; + } + pci_unmap_biosrom(oprom); + + return rom; +} + +enum sci_status isci_parse_oem_parameters(struct sci_oem_params *oem, + struct isci_orom *orom, int scu_index) +{ + /* check for valid inputs */ + if (scu_index < 0 || scu_index >= SCI_MAX_CONTROLLERS || + scu_index > orom->hdr.num_elements || !oem) + return -EINVAL; + + *oem = orom->ctrl[scu_index]; + return 0; +} + +struct isci_orom *isci_request_firmware(struct pci_dev *pdev, const struct firmware *fw) +{ + struct isci_orom *orom = NULL, *data; + int i, j; + + if (request_firmware(&fw, ISCI_FW_NAME, &pdev->dev) != 0) + return NULL; + + if (fw->size < sizeof(*orom)) + goto out; + + data = (struct isci_orom *)fw->data; + + if (strncmp(ISCI_ROM_SIG, data->hdr.signature, + strlen(ISCI_ROM_SIG)) != 0) + goto out; + + orom = devm_kzalloc(&pdev->dev, fw->size, GFP_KERNEL); + if (!orom) + goto out; + + memcpy(orom, fw->data, fw->size); + + if (is_c0(pdev)) + goto out; + + /* + * deprecated: override default amp_control for pre-preproduction + * silicon revisions + */ + for (i = 0; i < ARRAY_SIZE(orom->ctrl); i++) + for (j = 0; j < ARRAY_SIZE(orom->ctrl[i].phys); j++) { + orom->ctrl[i].phys[j].afe_tx_amp_control0 = 0xe7c03; + orom->ctrl[i].phys[j].afe_tx_amp_control1 = 0xe7c03; + orom->ctrl[i].phys[j].afe_tx_amp_control2 = 0xe7c03; + orom->ctrl[i].phys[j].afe_tx_amp_control3 = 0xe7c03; + } + out: + release_firmware(fw); + + return orom; +} + +static struct efi *get_efi(void) +{ +#ifdef CONFIG_EFI + return &efi; +#else + return NULL; +#endif +} + +struct isci_orom *isci_get_efi_var(struct pci_dev *pdev) +{ + efi_status_t status; + struct isci_orom *rom; + struct isci_oem_hdr *oem_hdr; + u8 *tmp, sum; + int j; + unsigned long data_len; + u8 *efi_data; + u32 efi_attrib = 0; + + data_len = 1024; + efi_data = devm_kzalloc(&pdev->dev, data_len, GFP_KERNEL); + if (!efi_data) { + dev_warn(&pdev->dev, + "Unable to allocate memory for EFI data\n"); + return NULL; + } + + rom = (struct isci_orom *)(efi_data + sizeof(struct isci_oem_hdr)); + + if (get_efi()) + status = get_efi()->get_variable(isci_efivar_name, + &ISCI_EFI_VENDOR_GUID, + &efi_attrib, + &data_len, + efi_data); + else + status = EFI_NOT_FOUND; + + if (status != EFI_SUCCESS) { + dev_warn(&pdev->dev, + "Unable to obtain EFI var data for OEM parms\n"); + return NULL; + } + + oem_hdr = (struct isci_oem_hdr *)efi_data; + + if (memcmp(oem_hdr->sig, ISCI_OEM_SIG, ISCI_OEM_SIG_SIZE) != 0) { + dev_warn(&pdev->dev, + "Invalid OEM header signature\n"); + return NULL; + } + + /* calculate checksum */ + tmp = (u8 *)efi_data; + for (j = 0, sum = 0; j < (sizeof(*oem_hdr) + sizeof(*rom)); j++, tmp++) + sum += *tmp; + + if (sum != 0) { + dev_warn(&pdev->dev, + "OEM table checksum failed\n"); + return NULL; + } + + if (memcmp(rom->hdr.signature, + ISCI_ROM_SIG, + ISCI_ROM_SIG_SIZE) != 0) { + dev_warn(&pdev->dev, + "Invalid OEM table signature\n"); + return NULL; + } + + return rom; +} diff --git a/drivers/scsi/isci/probe_roms.h b/drivers/scsi/isci/probe_roms.h new file mode 100644 index 000000000000..dc007e692f4e --- /dev/null +++ b/drivers/scsi/isci/probe_roms.h @@ -0,0 +1,249 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef _ISCI_PROBE_ROMS_H_ +#define _ISCI_PROBE_ROMS_H_ + +#ifdef __KERNEL__ +#include <linux/firmware.h> +#include <linux/pci.h> +#include <linux/efi.h> +#include "isci.h" + +#define SCIC_SDS_PARM_NO_SPEED 0 + +/* generation 1 (i.e. 1.5 Gb/s) */ +#define SCIC_SDS_PARM_GEN1_SPEED 1 + +/* generation 2 (i.e. 3.0 Gb/s) */ +#define SCIC_SDS_PARM_GEN2_SPEED 2 + +/* generation 3 (i.e. 6.0 Gb/s) */ +#define SCIC_SDS_PARM_GEN3_SPEED 3 +#define SCIC_SDS_PARM_MAX_SPEED SCIC_SDS_PARM_GEN3_SPEED + +/* parameters that can be set by module parameters */ +struct sci_user_parameters { + struct sci_phy_user_params { + /** + * This field specifies the NOTIFY (ENABLE SPIN UP) primitive + * insertion frequency for this phy index. + */ + u32 notify_enable_spin_up_insertion_frequency; + + /** + * This method specifies the number of transmitted DWORDs within which + * to transmit a single ALIGN primitive. This value applies regardless + * of what type of device is attached or connection state. A value of + * 0 indicates that no ALIGN primitives will be inserted. + */ + u16 align_insertion_frequency; + + /** + * This method specifies the number of transmitted DWORDs within which + * to transmit 2 ALIGN primitives. This applies for SAS connections + * only. A minimum value of 3 is required for this field. + */ + u16 in_connection_align_insertion_frequency; + + /** + * This field indicates the maximum speed generation to be utilized + * by phys in the supplied port. + * - A value of 1 indicates generation 1 (i.e. 1.5 Gb/s). + * - A value of 2 indicates generation 2 (i.e. 3.0 Gb/s). + * - A value of 3 indicates generation 3 (i.e. 6.0 Gb/s). + */ + u8 max_speed_generation; + + } phys[SCI_MAX_PHYS]; + + /** + * This field specifies the maximum number of direct attached devices + * that can have power supplied to them simultaneously. + */ + u8 max_number_concurrent_device_spin_up; + + /** + * This field specifies the number of seconds to allow a phy to consume + * power before yielding to another phy. + * + */ + u8 phy_spin_up_delay_interval; + + /** + * These timer values specifies how long a link will remain open with no + * activity in increments of a microsecond, it can be in increments of + * 100 microseconds if the upper most bit is set. + * + */ + u16 stp_inactivity_timeout; + u16 ssp_inactivity_timeout; + + /** + * These timer values specifies how long a link will remain open in increments + * of 100 microseconds. + * + */ + u16 stp_max_occupancy_timeout; + u16 ssp_max_occupancy_timeout; + + /** + * This timer value specifies how long a link will remain open with no + * outbound traffic in increments of a microsecond. + * + */ + u8 no_outbound_task_timeout; + +}; + +#define SCIC_SDS_PARM_PHY_MASK_MIN 0x0 +#define SCIC_SDS_PARM_PHY_MASK_MAX 0xF +#define MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT 4 + +struct sci_oem_params; +int sci_oem_parameters_validate(struct sci_oem_params *oem); + +struct isci_orom; +struct isci_orom *isci_request_oprom(struct pci_dev *pdev); +enum sci_status isci_parse_oem_parameters(struct sci_oem_params *oem, + struct isci_orom *orom, int scu_index); +struct isci_orom *isci_request_firmware(struct pci_dev *pdev, const struct firmware *fw); +struct isci_orom *isci_get_efi_var(struct pci_dev *pdev); + +struct isci_oem_hdr { + u8 sig[4]; + u8 rev_major; + u8 rev_minor; + u16 len; + u8 checksum; + u8 reserved1; + u16 reserved2; +} __attribute__ ((packed)); + +#else +#define SCI_MAX_PORTS 4 +#define SCI_MAX_PHYS 4 +#define SCI_MAX_CONTROLLERS 2 +#endif + +#define ISCI_FW_NAME "isci/isci_firmware.bin" + +#define ROMSIGNATURE 0xaa55 + +#define ISCI_OEM_SIG "$OEM" +#define ISCI_OEM_SIG_SIZE 4 +#define ISCI_ROM_SIG "ISCUOEMB" +#define ISCI_ROM_SIG_SIZE 8 + +#define ISCI_EFI_VENDOR_GUID \ + EFI_GUID(0x193dfefa, 0xa445, 0x4302, 0x99, 0xd8, 0xef, 0x3a, 0xad, \ + 0x1a, 0x04, 0xc6) +#define ISCI_EFI_VAR_NAME "RstScuO" + +/* Allowed PORT configuration modes APC Automatic PORT configuration mode is + * defined by the OEM configuration parameters providing no PHY_MASK parameters + * for any PORT. i.e. There are no phys assigned to any of the ports at start. + * MPC Manual PORT configuration mode is defined by the OEM configuration + * parameters providing a PHY_MASK value for any PORT. It is assumed that any + * PORT with no PHY_MASK is an invalid port and not all PHYs must be assigned. + * A PORT_PHY mask that assigns just a single PHY to a port and no other PHYs + * being assigned is sufficient to declare manual PORT configuration. + */ +enum sci_port_configuration_mode { + SCIC_PORT_MANUAL_CONFIGURATION_MODE = 0, + SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE = 1 +}; + +struct sci_bios_oem_param_block_hdr { + uint8_t signature[ISCI_ROM_SIG_SIZE]; + uint16_t total_block_length; + uint8_t hdr_length; + uint8_t version; + uint8_t preboot_source; + uint8_t num_elements; + uint16_t element_length; + uint8_t reserved[8]; +} __attribute__ ((packed)); + +struct sci_oem_params { + struct { + uint8_t mode_type; + uint8_t max_concurrent_dev_spin_up; + uint8_t do_enable_ssc; + uint8_t reserved; + } controller; + + struct { + uint8_t phy_mask; + } ports[SCI_MAX_PORTS]; + + struct sci_phy_oem_params { + struct { + uint32_t high; + uint32_t low; + } sas_address; + + uint32_t afe_tx_amp_control0; + uint32_t afe_tx_amp_control1; + uint32_t afe_tx_amp_control2; + uint32_t afe_tx_amp_control3; + } phys[SCI_MAX_PHYS]; +} __attribute__ ((packed)); + +struct isci_orom { + struct sci_bios_oem_param_block_hdr hdr; + struct sci_oem_params ctrl[SCI_MAX_CONTROLLERS]; +} __attribute__ ((packed)); + +#endif diff --git a/drivers/scsi/isci/registers.h b/drivers/scsi/isci/registers.h new file mode 100644 index 000000000000..9b266c7428e8 --- /dev/null +++ b/drivers/scsi/isci/registers.h @@ -0,0 +1,1934 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCU_REGISTERS_H_ +#define _SCU_REGISTERS_H_ + +/** + * This file contains the constants and structures for the SCU memory mapped + * registers. + * + * + */ + +#define SCU_VIIT_ENTRY_ID_MASK (0xC0000000) +#define SCU_VIIT_ENTRY_ID_SHIFT (30) + +#define SCU_VIIT_ENTRY_FUNCTION_MASK (0x0FF00000) +#define SCU_VIIT_ENTRY_FUNCTION_SHIFT (20) + +#define SCU_VIIT_ENTRY_IPPTMODE_MASK (0x0001F800) +#define SCU_VIIT_ENTRY_IPPTMODE_SHIFT (12) + +#define SCU_VIIT_ENTRY_LPVIE_MASK (0x00000F00) +#define SCU_VIIT_ENTRY_LPVIE_SHIFT (8) + +#define SCU_VIIT_ENTRY_STATUS_MASK (0x000000FF) +#define SCU_VIIT_ENTRY_STATUS_SHIFT (0) + +#define SCU_VIIT_ENTRY_ID_INVALID (0 << SCU_VIIT_ENTRY_ID_SHIFT) +#define SCU_VIIT_ENTRY_ID_VIIT (1 << SCU_VIIT_ENTRY_ID_SHIFT) +#define SCU_VIIT_ENTRY_ID_IIT (2 << SCU_VIIT_ENTRY_ID_SHIFT) +#define SCU_VIIT_ENTRY_ID_VIRT_EXP (3 << SCU_VIIT_ENTRY_ID_SHIFT) + +#define SCU_VIIT_IPPT_SSP_INITIATOR (0x01 << SCU_VIIT_ENTRY_IPPTMODE_SHIFT) +#define SCU_VIIT_IPPT_SMP_INITIATOR (0x02 << SCU_VIIT_ENTRY_IPPTMODE_SHIFT) +#define SCU_VIIT_IPPT_STP_INITIATOR (0x04 << SCU_VIIT_ENTRY_IPPTMODE_SHIFT) +#define SCU_VIIT_IPPT_INITIATOR \ + (\ + SCU_VIIT_IPPT_SSP_INITIATOR \ + | SCU_VIIT_IPPT_SMP_INITIATOR \ + | SCU_VIIT_IPPT_STP_INITIATOR \ + ) + +#define SCU_VIIT_STATUS_RNC_VALID (0x01 << SCU_VIIT_ENTRY_STATUS_SHIFT) +#define SCU_VIIT_STATUS_ADDRESS_VALID (0x02 << SCU_VIIT_ENTRY_STATUS_SHIFT) +#define SCU_VIIT_STATUS_RNI_VALID (0x04 << SCU_VIIT_ENTRY_STATUS_SHIFT) +#define SCU_VIIT_STATUS_ALL_VALID \ + (\ + SCU_VIIT_STATUS_RNC_VALID \ + | SCU_VIIT_STATUS_ADDRESS_VALID \ + | SCU_VIIT_STATUS_RNI_VALID \ + ) + +#define SCU_VIIT_IPPT_SMP_TARGET (0x10 << SCU_VIIT_ENTRY_IPPTMODE_SHIFT) + +/** + * struct scu_viit_entry - This is the SCU Virtual Initiator Table Entry + * + * + */ +struct scu_viit_entry { + /** + * This must be encoded as to the type of initiator that is being constructed + * for this port. + */ + u32 status; + + /** + * Virtual initiator high SAS Address + */ + u32 initiator_sas_address_hi; + + /** + * Virtual initiator low SAS Address + */ + u32 initiator_sas_address_lo; + + /** + * This must be 0 + */ + u32 reserved; + +}; + + +/* IIT Status Defines */ +#define SCU_IIT_ENTRY_ID_MASK (0xC0000000) +#define SCU_IIT_ENTRY_ID_SHIFT (30) + +#define SCU_IIT_ENTRY_STATUS_UPDATE_MASK (0x20000000) +#define SCU_IIT_ENTRY_STATUS_UPDATE_SHIFT (29) + +#define SCU_IIT_ENTRY_LPI_MASK (0x00000F00) +#define SCU_IIT_ENTRY_LPI_SHIFT (8) + +#define SCU_IIT_ENTRY_STATUS_MASK (0x000000FF) +#define SCU_IIT_ENTRY_STATUS_SHIFT (0) + +/* IIT Remote Initiator Defines */ +#define SCU_IIT_ENTRY_REMOTE_TAG_MASK (0x0000FFFF) +#define SCU_IIT_ENTRY_REMOTE_TAG_SHIFT (0) + +#define SCU_IIT_ENTRY_REMOTE_RNC_MASK (0x0FFF0000) +#define SCU_IIT_ENTRY_REMOTE_RNC_SHIFT (16) + +#define SCU_IIT_ENTRY_ID_INVALID (0 << SCU_IIT_ENTRY_ID_SHIFT) +#define SCU_IIT_ENTRY_ID_VIIT (1 << SCU_IIT_ENTRY_ID_SHIFT) +#define SCU_IIT_ENTRY_ID_IIT (2 << SCU_IIT_ENTRY_ID_SHIFT) +#define SCU_IIT_ENTRY_ID_VIRT_EXP (3 << SCU_IIT_ENTRY_ID_SHIFT) + +/** + * struct scu_iit_entry - This will be implemented later when we support + * virtual functions + * + * + */ +struct scu_iit_entry { + u32 status; + u32 remote_initiator_sas_address_hi; + u32 remote_initiator_sas_address_lo; + u32 remote_initiator; + +}; + +/* Generate a value for an SCU register */ +#define SCU_GEN_VALUE(name, value) \ + (((value) << name ## _SHIFT) & (name ## _MASK)) + +/* + * Generate a bit value for an SCU register + * Make sure that the register MASK is just a single bit */ +#define SCU_GEN_BIT(name) \ + SCU_GEN_VALUE(name, ((u32)1)) + +#define SCU_SET_BIT(name, reg_value) \ + ((reg_value) | SCU_GEN_BIT(name)) + +#define SCU_CLEAR_BIT(name, reg_value) \ + ((reg_value)$ ~(SCU_GEN_BIT(name))) + +/* + * ***************************************************************************** + * Unions for bitfield definitions of SCU Registers + * SMU Post Context Port + * ***************************************************************************** */ +#define SMU_POST_CONTEXT_PORT_CONTEXT_INDEX_SHIFT (0) +#define SMU_POST_CONTEXT_PORT_CONTEXT_INDEX_MASK (0x00000FFF) +#define SMU_POST_CONTEXT_PORT_LOGICAL_PORT_INDEX_SHIFT (12) +#define SMU_POST_CONTEXT_PORT_LOGICAL_PORT_INDEX_MASK (0x0000F000) +#define SMU_POST_CONTEXT_PORT_PROTOCOL_ENGINE_SHIFT (16) +#define SMU_POST_CONTEXT_PORT_PROTOCOL_ENGINE_MASK (0x00030000) +#define SMU_POST_CONTEXT_PORT_COMMAND_CONTEXT_SHIFT (18) +#define SMU_POST_CONTEXT_PORT_COMMAND_CONTEXT_MASK (0x00FC0000) +#define SMU_POST_CONTEXT_PORT_RESERVED_MASK (0xFF000000) + +#define SMU_PCP_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_POST_CONTEXT_PORT_ ## name, value) + +/* ***************************************************************************** */ +#define SMU_INTERRUPT_STATUS_COMPLETION_SHIFT (31) +#define SMU_INTERRUPT_STATUS_COMPLETION_MASK (0x80000000) +#define SMU_INTERRUPT_STATUS_QUEUE_SUSPEND_SHIFT (1) +#define SMU_INTERRUPT_STATUS_QUEUE_SUSPEND_MASK (0x00000002) +#define SMU_INTERRUPT_STATUS_QUEUE_ERROR_SHIFT (0) +#define SMU_INTERRUPT_STATUS_QUEUE_ERROR_MASK (0x00000001) +#define SMU_INTERRUPT_STATUS_RESERVED_MASK (0x7FFFFFFC) + +#define SMU_ISR_GEN_BIT(name) \ + SCU_GEN_BIT(SMU_INTERRUPT_STATUS_ ## name) + +#define SMU_ISR_QUEUE_ERROR SMU_ISR_GEN_BIT(QUEUE_ERROR) +#define SMU_ISR_QUEUE_SUSPEND SMU_ISR_GEN_BIT(QUEUE_SUSPEND) +#define SMU_ISR_COMPLETION SMU_ISR_GEN_BIT(COMPLETION) + +/* ***************************************************************************** */ +#define SMU_INTERRUPT_MASK_COMPLETION_SHIFT (31) +#define SMU_INTERRUPT_MASK_COMPLETION_MASK (0x80000000) +#define SMU_INTERRUPT_MASK_QUEUE_SUSPEND_SHIFT (1) +#define SMU_INTERRUPT_MASK_QUEUE_SUSPEND_MASK (0x00000002) +#define SMU_INTERRUPT_MASK_QUEUE_ERROR_SHIFT (0) +#define SMU_INTERRUPT_MASK_QUEUE_ERROR_MASK (0x00000001) +#define SMU_INTERRUPT_MASK_RESERVED_MASK (0x7FFFFFFC) + +#define SMU_IMR_GEN_BIT(name) \ + SCU_GEN_BIT(SMU_INTERRUPT_MASK_ ## name) + +#define SMU_IMR_QUEUE_ERROR SMU_IMR_GEN_BIT(QUEUE_ERROR) +#define SMU_IMR_QUEUE_SUSPEND SMU_IMR_GEN_BIT(QUEUE_SUSPEND) +#define SMU_IMR_COMPLETION SMU_IMR_GEN_BIT(COMPLETION) + +/* ***************************************************************************** */ +#define SMU_INTERRUPT_COALESCING_CONTROL_TIMER_SHIFT (0) +#define SMU_INTERRUPT_COALESCING_CONTROL_TIMER_MASK (0x0000001F) +#define SMU_INTERRUPT_COALESCING_CONTROL_NUMBER_SHIFT (8) +#define SMU_INTERRUPT_COALESCING_CONTROL_NUMBER_MASK (0x0000FF00) +#define SMU_INTERRUPT_COALESCING_CONTROL_RESERVED_MASK (0xFFFF00E0) + +#define SMU_ICC_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_INTERRUPT_COALESCING_CONTROL_ ## name, value) + +/* ***************************************************************************** */ +#define SMU_TASK_CONTEXT_RANGE_START_SHIFT (0) +#define SMU_TASK_CONTEXT_RANGE_START_MASK (0x00000FFF) +#define SMU_TASK_CONTEXT_RANGE_ENDING_SHIFT (16) +#define SMU_TASK_CONTEXT_RANGE_ENDING_MASK (0x0FFF0000) +#define SMU_TASK_CONTEXT_RANGE_ENABLE_SHIFT (31) +#define SMU_TASK_CONTEXT_RANGE_ENABLE_MASK (0x80000000) +#define SMU_TASK_CONTEXT_RANGE_RESERVED_MASK (0x7000F000) + +#define SMU_TCR_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_TASK_CONTEXT_RANGE_ ## name, value) + +#define SMU_TCR_GEN_BIT(name, value) \ + SCU_GEN_BIT(SMU_TASK_CONTEXT_RANGE_ ## name) + +/* ***************************************************************************** */ + +#define SMU_COMPLETION_QUEUE_PUT_POINTER_SHIFT (0) +#define SMU_COMPLETION_QUEUE_PUT_POINTER_MASK (0x00003FFF) +#define SMU_COMPLETION_QUEUE_PUT_CYCLE_BIT_SHIFT (15) +#define SMU_COMPLETION_QUEUE_PUT_CYCLE_BIT_MASK (0x00008000) +#define SMU_COMPLETION_QUEUE_PUT_EVENT_POINTER_SHIFT (16) +#define SMU_COMPLETION_QUEUE_PUT_EVENT_POINTER_MASK (0x03FF0000) +#define SMU_COMPLETION_QUEUE_PUT_EVENT_CYCLE_BIT_SHIFT (26) +#define SMU_COMPLETION_QUEUE_PUT_EVENT_CYCLE_BIT_MASK (0x04000000) +#define SMU_COMPLETION_QUEUE_PUT_RESERVED_MASK (0xF8004000) + +#define SMU_CQPR_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_COMPLETION_QUEUE_PUT_ ## name, value) + +#define SMU_CQPR_GEN_BIT(name) \ + SCU_GEN_BIT(SMU_COMPLETION_QUEUE_PUT_ ## name) + +/* ***************************************************************************** */ + +#define SMU_COMPLETION_QUEUE_GET_POINTER_SHIFT (0) +#define SMU_COMPLETION_QUEUE_GET_POINTER_MASK (0x00003FFF) +#define SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_SHIFT (15) +#define SMU_COMPLETION_QUEUE_GET_CYCLE_BIT_MASK (0x00008000) +#define SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_SHIFT (16) +#define SMU_COMPLETION_QUEUE_GET_EVENT_POINTER_MASK (0x03FF0000) +#define SMU_COMPLETION_QUEUE_GET_EVENT_CYCLE_BIT_SHIFT (26) +#define SMU_COMPLETION_QUEUE_GET_EVENT_CYCLE_BIT_MASK (0x04000000) +#define SMU_COMPLETION_QUEUE_GET_ENABLE_SHIFT (30) +#define SMU_COMPLETION_QUEUE_GET_ENABLE_MASK (0x40000000) +#define SMU_COMPLETION_QUEUE_GET_EVENT_ENABLE_SHIFT (31) +#define SMU_COMPLETION_QUEUE_GET_EVENT_ENABLE_MASK (0x80000000) +#define SMU_COMPLETION_QUEUE_GET_RESERVED_MASK (0x38004000) + +#define SMU_CQGR_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_COMPLETION_QUEUE_GET_ ## name, value) + +#define SMU_CQGR_GEN_BIT(name) \ + SCU_GEN_BIT(SMU_COMPLETION_QUEUE_GET_ ## name) + +#define SMU_CQGR_CYCLE_BIT \ + SMU_CQGR_GEN_BIT(CYCLE_BIT) + +#define SMU_CQGR_EVENT_CYCLE_BIT \ + SMU_CQGR_GEN_BIT(EVENT_CYCLE_BIT) + +#define SMU_CQGR_GET_POINTER_SET(value) \ + SMU_CQGR_GEN_VAL(POINTER, value) + + +/* ***************************************************************************** */ +#define SMU_COMPLETION_QUEUE_CONTROL_QUEUE_LIMIT_SHIFT (0) +#define SMU_COMPLETION_QUEUE_CONTROL_QUEUE_LIMIT_MASK (0x00003FFF) +#define SMU_COMPLETION_QUEUE_CONTROL_EVENT_LIMIT_SHIFT (16) +#define SMU_COMPLETION_QUEUE_CONTROL_EVENT_LIMIT_MASK (0x03FF0000) +#define SMU_COMPLETION_QUEUE_CONTROL_RESERVED_MASK (0xFC00C000) + +#define SMU_CQC_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_COMPLETION_QUEUE_CONTROL_ ## name, value) + +#define SMU_CQC_QUEUE_LIMIT_SET(value) \ + SMU_CQC_GEN_VAL(QUEUE_LIMIT, value) + +#define SMU_CQC_EVENT_LIMIT_SET(value) \ + SMU_CQC_GEN_VAL(EVENT_LIMIT, value) + + +/* ***************************************************************************** */ +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_SHIFT (0) +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_MASK (0x00000FFF) +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT (12) +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_MASK (0x00007000) +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_SHIFT (15) +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_MASK (0x07FF8000) +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_PEG_SHIFT (27) +#define SMU_DEVICE_CONTEXT_CAPACITY_MAX_PEG_MASK (0x08000000) +#define SMU_DEVICE_CONTEXT_CAPACITY_RESERVED_MASK (0xF0000000) + +#define SMU_DCC_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_DEVICE_CONTEXT_CAPACITY_ ## name, value) + +#define SMU_DCC_GET_MAX_PEG(value) \ + (\ + ((value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_PEG_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT \ + ) + +#define SMU_DCC_GET_MAX_LP(value) \ + (\ + ((value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_LP_SHIFT \ + ) + +#define SMU_DCC_GET_MAX_TC(value) \ + (\ + ((value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_TC_SHIFT \ + ) + +#define SMU_DCC_GET_MAX_RNC(value) \ + (\ + ((value) & SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_MASK) \ + >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_SHIFT \ + ) + +/* -------------------------------------------------------------------------- */ + +#define SMU_CONTROL_STATUS_TASK_CONTEXT_RANGE_ENABLE_SHIFT (0) +#define SMU_CONTROL_STATUS_TASK_CONTEXT_RANGE_ENABLE_MASK (0x00000001) +#define SMU_CONTROL_STATUS_COMPLETION_BYTE_SWAP_ENABLE_SHIFT (1) +#define SMU_CONTROL_STATUS_COMPLETION_BYTE_SWAP_ENABLE_MASK (0x00000002) +#define SMU_CONTROL_STATUS_CONTEXT_RAM_INIT_COMPLETED_SHIFT (16) +#define SMU_CONTROL_STATUS_CONTEXT_RAM_INIT_COMPLETED_MASK (0x00010000) +#define SMU_CONTROL_STATUS_SCHEDULER_RAM_INIT_COMPLETED_SHIFT (17) +#define SMU_CONTROL_STATUS_SCHEDULER_RAM_INIT_COMPLETED_MASK (0x00020000) +#define SMU_CONTROL_STATUS_RESERVED_MASK (0xFFFCFFFC) + +#define SMU_SMUCSR_GEN_BIT(name) \ + SCU_GEN_BIT(SMU_CONTROL_STATUS_ ## name) + +#define SMU_SMUCSR_SCHEDULER_RAM_INIT_COMPLETED \ + (SMU_SMUCSR_GEN_BIT(SCHEDULER_RAM_INIT_COMPLETED)) + +#define SMU_SMUCSR_CONTEXT_RAM_INIT_COMPLETED \ + (SMU_SMUCSR_GEN_BIT(CONTEXT_RAM_INIT_COMPLETED)) + +#define SCU_RAM_INIT_COMPLETED \ + (\ + SMU_SMUCSR_CONTEXT_RAM_INIT_COMPLETED \ + | SMU_SMUCSR_SCHEDULER_RAM_INIT_COMPLETED \ + ) + +/* -------------------------------------------------------------------------- */ + +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE0_SHIFT (0) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE0_MASK (0x00000001) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE1_SHIFT (1) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE1_MASK (0x00000002) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE2_SHIFT (2) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE2_MASK (0x00000004) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE3_SHIFT (3) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_PE3_MASK (0x00000008) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE0_SHIFT (8) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE0_MASK (0x00000100) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE1_SHIFT (9) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE1_MASK (0x00000200) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE2_SHIFT (10) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE2_MASK (0x00000400) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE3_SHIFT (11) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_PE3_MASK (0x00000800) + +#define SMU_RESET_PROTOCOL_ENGINE(peg, pe) \ + ((1 << (pe)) << ((peg) * 8)) + +#define SMU_RESET_PEG_PROTOCOL_ENGINES(peg) \ + (\ + SMU_RESET_PROTOCOL_ENGINE(peg, 0) \ + | SMU_RESET_PROTOCOL_ENGINE(peg, 1) \ + | SMU_RESET_PROTOCOL_ENGINE(peg, 2) \ + | SMU_RESET_PROTOCOL_ENGINE(peg, 3) \ + ) + +#define SMU_RESET_ALL_PROTOCOL_ENGINES() \ + (\ + SMU_RESET_PEG_PROTOCOL_ENGINES(0) \ + | SMU_RESET_PEG_PROTOCOL_ENGINES(1) \ + ) + +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG0_LP0_SHIFT (16) +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG0_LP0_MASK (0x00010000) +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG0_LP2_SHIFT (17) +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG0_LP2_MASK (0x00020000) +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG1_LP0_SHIFT (18) +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG1_LP0_MASK (0x00040000) +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG1_LP2_SHIFT (19) +#define SMU_SOFTRESET_CONTROL_RESET_WIDE_PORT_PEG1_LP2_MASK (0x00080000) + +#define SMU_RESET_WIDE_PORT_QUEUE(peg, wide_port) \ + ((1 << ((wide_port) / 2)) << ((peg) * 2) << 16) + +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_SHIFT (20) +#define SMU_SOFTRESET_CONTROL_RESET_PEG0_MASK (0x00100000) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_SHIFT (21) +#define SMU_SOFTRESET_CONTROL_RESET_PEG1_MASK (0x00200000) +#define SMU_SOFTRESET_CONTROL_RESET_SCU_SHIFT (22) +#define SMU_SOFTRESET_CONTROL_RESET_SCU_MASK (0x00400000) + +/* + * It seems to make sense that if you are going to reset the protocol + * engine group that you would also reset all of the protocol engines */ +#define SMU_RESET_PROTOCOL_ENGINE_GROUP(peg) \ + (\ + (1 << ((peg) + 20)) \ + | SMU_RESET_WIDE_PORT_QUEUE(peg, 0) \ + | SMU_RESET_WIDE_PORT_QUEUE(peg, 1) \ + | SMU_RESET_PEG_PROTOCOL_ENGINES(peg) \ + ) + +#define SMU_RESET_ALL_PROTOCOL_ENGINE_GROUPS() \ + (\ + SMU_RESET_PROTOCOL_ENGINE_GROUP(0) \ + | SMU_RESET_PROTOCOL_ENGINE_GROUP(1) \ + ) + +#define SMU_RESET_SCU() (0xFFFFFFFF) + + + +/* ***************************************************************************** */ +#define SMU_TASK_CONTEXT_ASSIGNMENT_STARTING_SHIFT (0) +#define SMU_TASK_CONTEXT_ASSIGNMENT_STARTING_MASK (0x00000FFF) +#define SMU_TASK_CONTEXT_ASSIGNMENT_ENDING_SHIFT (16) +#define SMU_TASK_CONTEXT_ASSIGNMENT_ENDING_MASK (0x0FFF0000) +#define SMU_TASK_CONTEXT_ASSIGNMENT_RANGE_CHECK_ENABLE_SHIFT (31) +#define SMU_TASK_CONTEXT_ASSIGNMENT_RANGE_CHECK_ENABLE_MASK (0x80000000) +#define SMU_TASK_CONTEXT_ASSIGNMENT_RESERVED_MASK (0x7000F000) + +#define SMU_TCA_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_TASK_CONTEXT_ASSIGNMENT_ ## name, value) + +#define SMU_TCA_GEN_BIT(name) \ + SCU_GEN_BIT(SMU_TASK_CONTEXT_ASSIGNMENT_ ## name) + +/* ***************************************************************************** */ +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_CONTROL_QUEUE_SIZE_SHIFT (0) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_CONTROL_QUEUE_SIZE_MASK (0x00000FFF) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_CONTROL_RESERVED_MASK (0xFFFFF000) + +#define SCU_UFQC_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SDMA_UNSOLICITED_FRAME_QUEUE_CONTROL_ ## name, value) + +#define SCU_UFQC_QUEUE_SIZE_SET(value) \ + SCU_UFQC_GEN_VAL(QUEUE_SIZE, value) + +/* ***************************************************************************** */ +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_POINTER_SHIFT (0) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_POINTER_MASK (0x00000FFF) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_CYCLE_BIT_SHIFT (12) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_CYCLE_BIT_MASK (0x00001000) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_RESERVED_MASK (0xFFFFE000) + +#define SCU_UFQPP_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_ ## name, value) + +#define SCU_UFQPP_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SDMA_UNSOLICITED_FRAME_QUEUE_PUT_ ## name) + +/* + * ***************************************************************************** + * * SDMA Registers + * ***************************************************************************** */ +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_POINTER_SHIFT (0) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_POINTER_MASK (0x00000FFF) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_CYCLE_BIT_SHIFT (12) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_CYCLE_BIT_MASK (12) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_ENABLE_BIT_SHIFT (31) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_ENABLE_BIT_MASK (0x80000000) +#define SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_RESERVED_MASK (0x7FFFE000) + +#define SCU_UFQGP_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_ ## name, value) + +#define SCU_UFQGP_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SDMA_UNSOLICITED_FRAME_QUEUE_GET_ ## name) + +#define SCU_UFQGP_CYCLE_BIT(value) \ + SCU_UFQGP_GEN_BIT(CYCLE_BIT, value) + +#define SCU_UFQGP_GET_POINTER(value) \ + SCU_UFQGP_GEN_VALUE(POINTER, value) + +#define SCU_UFQGP_ENABLE(value) \ + (SCU_UFQGP_GEN_BIT(ENABLE) | value) + +#define SCU_UFQGP_DISABLE(value) \ + (~SCU_UFQGP_GEN_BIT(ENABLE) & value) + +#define SCU_UFQGP_VALUE(bit, value) \ + (SCU_UFQGP_CYCLE_BIT(bit) | SCU_UFQGP_GET_POINTER(value)) + +/* ***************************************************************************** */ +#define SCU_PDMA_CONFIGURATION_ADDRESS_MODIFIER_SHIFT (0) +#define SCU_PDMA_CONFIGURATION_ADDRESS_MODIFIER_MASK (0x0000FFFF) +#define SCU_PDMA_CONFIGURATION_PCI_RELAXED_ORDERING_ENABLE_SHIFT (16) +#define SCU_PDMA_CONFIGURATION_PCI_RELAXED_ORDERING_ENABLE_MASK (0x00010000) +#define SCU_PDMA_CONFIGURATION_PCI_NO_SNOOP_ENABLE_SHIFT (17) +#define SCU_PDMA_CONFIGURATION_PCI_NO_SNOOP_ENABLE_MASK (0x00020000) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_BYTE_SWAP_SHIFT (18) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_BYTE_SWAP_MASK (0x00040000) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_SGL_FETCH_SHIFT (19) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_SGL_FETCH_MASK (0x00080000) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_RX_HEADER_RAM_WRITE_SHIFT (20) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_RX_HEADER_RAM_WRITE_MASK (0x00100000) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_UF_ADDRESS_FETCH_SHIFT (21) +#define SCU_PDMA_CONFIGURATION_BIG_ENDIAN_CONTROL_XPI_UF_ADDRESS_FETCH_MASK (0x00200000) +#define SCU_PDMA_CONFIGURATION_ADDRESS_MODIFIER_SELECT_SHIFT (22) +#define SCU_PDMA_CONFIGURATION_ADDRESS_MODIFIER_SELECT_MASK (0x00400000) +#define SCU_PDMA_CONFIGURATION_RESERVED_MASK (0xFF800000) + +#define SCU_PDMACR_GEN_VALUE(name, value) \ + SCU_GEN_VALUE(SCU_PDMA_CONFIGURATION_ ## name, value) + +#define SCU_PDMACR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_PDMA_CONFIGURATION_ ## name) + +#define SCU_PDMACR_BE_GEN_BIT(name) \ + SCU_PCMACR_GEN_BIT(BIG_ENDIAN_CONTROL_ ## name) + +/* ***************************************************************************** */ +#define SCU_CDMA_CONFIGURATION_PCI_RELAXED_ORDERING_ENABLE_SHIFT (8) +#define SCU_CDMA_CONFIGURATION_PCI_RELAXED_ORDERING_ENABLE_MASK (0x00000100) + +#define SCU_CDMACR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_CDMA_CONFIGURATION_ ## name) + +/* + * ***************************************************************************** + * * SCU Link Layer Registers + * ***************************************************************************** */ +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_TIMEOUT_SHIFT (0) +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_TIMEOUT_MASK (0x000000FF) +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_LOCK_TIME_SHIFT (8) +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_LOCK_TIME_MASK (0x0000FF00) +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_RATE_CHANGE_DELAY_SHIFT (16) +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_RATE_CHANGE_DELAY_MASK (0x00FF0000) +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_DWORD_SYNC_TIMEOUT_SHIFT (24) +#define SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_DWORD_SYNC_TIMEOUT_MASK (0xFF000000) +#define SCU_LINK_LAYER_SPEED_NECGOIATION_TIMER_VALUES_REQUIRED_MASK (0x00000000) +#define SCU_LINK_LAYER_SPEED_NECGOIATION_TIMER_VALUES_DEFAULT_MASK (0x7D00676F) +#define SCU_LINK_LAYER_SPEED_NECGOIATION_TIMER_VALUES_RESERVED_MASK (0x00FF0000) + +#define SCU_SAS_SPDTOV_GEN_VALUE(name, value) \ + SCU_GEN_VALUE(SCU_LINK_LAYER_SPEED_NEGOTIATION_TIMER_VALUES_ ## name, value) + + +#define SCU_LINK_STATUS_DWORD_SYNC_AQUIRED_SHIFT (2) +#define SCU_LINK_STATUS_DWORD_SYNC_AQUIRED_MASK (0x00000004) +#define SCU_LINK_STATUS_TRANSMIT_PORT_SELECTION_DONE_SHIFT (4) +#define SCU_LINK_STATUS_TRANSMIT_PORT_SELECTION_DONE_MASK (0x00000010) +#define SCU_LINK_STATUS_RECEIVER_CREDIT_EXHAUSTED_SHIFT (5) +#define SCU_LINK_STATUS_RECEIVER_CREDIT_EXHAUSTED_MASK (0x00000020) +#define SCU_LINK_STATUS_RESERVED_MASK (0xFFFFFFCD) + +#define SCU_SAS_LLSTA_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_LINK_STATUS_ ## name) + + +/* TODO: Where is the SATA_PSELTOV register? */ + +/* + * ***************************************************************************** + * * SCU SAS Maximum Arbitration Wait Time Timeout Register + * ***************************************************************************** */ +#define SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_VALUE_SHIFT (0) +#define SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_VALUE_MASK (0x00007FFF) +#define SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_SCALE_SHIFT (15) +#define SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_SCALE_MASK (0x00008000) + +#define SCU_SAS_MAWTTOV_GEN_VALUE(name, value) \ + SCU_GEN_VALUE(SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_ ## name, value) + +#define SCU_SAS_MAWTTOV_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SAS_MAX_ARBITRATION_WAIT_TIME_TIMEOUT_ ## name) + + +/* + * TODO: Where is the SAS_LNKTOV regsiter? + * TODO: Where is the SAS_PHYTOV register? */ + +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SMP_TARGET_SHIFT (1) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SMP_TARGET_MASK (0x00000002) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_STP_TARGET_SHIFT (2) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_STP_TARGET_MASK (0x00000004) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SSP_TARGET_SHIFT (3) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SSP_TARGET_MASK (0x00000008) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_DA_SATA_HOST_SHIFT (8) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_DA_SATA_HOST_MASK (0x00000100) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SMP_INITIATOR_SHIFT (9) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SMP_INITIATOR_MASK (0x00000200) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_STP_INITIATOR_SHIFT (10) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_STP_INITIATOR_MASK (0x00000400) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SSP_INITIATOR_SHIFT (11) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_SSP_INITIATOR_MASK (0x00000800) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_REASON_CODE_SHIFT (16) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_REASON_CODE_MASK (0x000F0000) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_ADDRESS_FRAME_TYPE_SHIFT (24) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_ADDRESS_FRAME_TYPE_MASK (0x0F000000) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_DEVICE_TYPE_SHIFT (28) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_DEVICE_TYPE_MASK (0x70000000) +#define SCU_SAS_TRANSMIT_IDENTIFICATION_RESERVED_MASK (0x80F0F1F1) + +#define SCU_SAS_TIID_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SAS_TRANSMIT_IDENTIFICATION_ ## name, value) + +#define SCU_SAS_TIID_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SAS_TRANSMIT_IDENTIFICATION_ ## name) + +/* SAS Identify Frame PHY Identifier Register */ +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_BREAK_REPLY_CAPABLE_SHIFT (16) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_BREAK_REPLY_CAPABLE_MASK (0x00010000) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_REQUESTED_INSIDE_ZPSDS_SHIFT (17) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_REQUESTED_INSIDE_ZPSDS_MASK (0x00020000) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_INSIDE_ZPSDS_PERSISTENT_SHIFT (18) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_INSIDE_ZPSDS_PERSISTENT_MASK (0x00040000) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_ID_SHIFT (24) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_ID_MASK (0xFF000000) +#define SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_RESERVED_MASK (0x00F800FF) + +#define SCU_SAS_TIPID_GEN_VALUE(name, value) \ + SCU_GEN_VALUE(SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_ ## name, value) + +#define SCU_SAS_TIPID_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_LINK_LAYER_IDENTIFY_FRAME_PHY_IDENTIFIER_ ## name) + + +#define SCU_SAS_PHY_CONFIGURATION_TX_PARITY_CHECK_SHIFT (4) +#define SCU_SAS_PHY_CONFIGURATION_TX_PARITY_CHECK_MASK (0x00000010) +#define SCU_SAS_PHY_CONFIGURATION_TX_BAD_CRC_SHIFT (6) +#define SCU_SAS_PHY_CONFIGURATION_TX_BAD_CRC_MASK (0x00000040) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_SCRAMBLER_SHIFT (7) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_SCRAMBLER_MASK (0x00000080) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_DESCRAMBLER_SHIFT (8) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_DESCRAMBLER_MASK (0x00000100) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_CREDIT_INSERTION_SHIFT (9) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_CREDIT_INSERTION_MASK (0x00000200) +#define SCU_SAS_PHY_CONFIGURATION_SUSPEND_PROTOCOL_ENGINE_SHIFT (11) +#define SCU_SAS_PHY_CONFIGURATION_SUSPEND_PROTOCOL_ENGINE_MASK (0x00000800) +#define SCU_SAS_PHY_CONFIGURATION_SATA_SPINUP_HOLD_SHIFT (12) +#define SCU_SAS_PHY_CONFIGURATION_SATA_SPINUP_HOLD_MASK (0x00001000) +#define SCU_SAS_PHY_CONFIGURATION_TRANSMIT_PORT_SELECTION_SIGNAL_SHIFT (13) +#define SCU_SAS_PHY_CONFIGURATION_TRANSMIT_PORT_SELECTION_SIGNAL_MASK (0x00002000) +#define SCU_SAS_PHY_CONFIGURATION_HARD_RESET_SHIFT (14) +#define SCU_SAS_PHY_CONFIGURATION_HARD_RESET_MASK (0x00004000) +#define SCU_SAS_PHY_CONFIGURATION_OOB_ENABLE_SHIFT (15) +#define SCU_SAS_PHY_CONFIGURATION_OOB_ENABLE_MASK (0x00008000) +#define SCU_SAS_PHY_CONFIGURATION_ENABLE_FRAME_TX_INSERT_ALIGN_SHIFT (23) +#define SCU_SAS_PHY_CONFIGURATION_ENABLE_FRAME_TX_INSERT_ALIGN_MASK (0x00800000) +#define SCU_SAS_PHY_CONFIGURATION_FORWARD_IDENTIFY_FRAME_SHIFT (27) +#define SCU_SAS_PHY_CONFIGURATION_FORWARD_IDENTIFY_FRAME_MASK (0x08000000) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_BYTE_TRANSPOSE_STP_FRAME_SHIFT (28) +#define SCU_SAS_PHY_CONFIGURATION_DISABLE_BYTE_TRANSPOSE_STP_FRAME_MASK (0x10000000) +#define SCU_SAS_PHY_CONFIGURATION_OOB_RESET_SHIFT (29) +#define SCU_SAS_PHY_CONFIGURATION_OOB_RESET_MASK (0x20000000) +#define SCU_SAS_PHY_CONFIGURATION_THREE_IAF_ENABLE_SHIFT (30) +#define SCU_SAS_PHY_CONFIGURATION_THREE_IAF_ENABLE_MASK (0x40000000) +#define SCU_SAS_PHY_CONFIGURATION_OOB_ALIGN0_ENABLE_SHIFT (31) +#define SCU_SAS_PHY_CONFIGURATION_OOB_ALIGN0_ENABLE_MASK (0x80000000) +#define SCU_SAS_PHY_CONFIGURATION_REQUIRED_MASK (0x0100000F) +#define SCU_SAS_PHY_CONFIGURATION_DEFAULT_MASK (0x4180100F) +#define SCU_SAS_PHY_CONFIGURATION_RESERVED_MASK (0x00000000) + +#define SCU_SAS_PCFG_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SAS_PHY_CONFIGURATION_ ## name) + +#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_GENERAL_SHIFT (0) +#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_GENERAL_MASK (0x000007FF) +#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_CONNECTED_SHIFT (16) +#define SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_CONNECTED_MASK (0x00ff0000) + +#define SCU_ALIGN_INSERTION_FREQUENCY_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_LINK_LAYER_ALIGN_INSERTION_FREQUENCY_##name, value) + +#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_COUNT_SHIFT (0) +#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_COUNT_MASK (0x0003FFFF) +#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_ENABLE_SHIFT (31) +#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_ENABLE_MASK (0x80000000) +#define SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_RESERVED_MASK (0x7FFC0000) + +#define SCU_ENSPINUP_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_ ## name, value) + +#define SCU_ENSPINUP_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_LINK_LAYER_ENABLE_SPINUP_CONTROL_ ## name) + + +#define SCU_LINK_LAYER_PHY_CAPABILITIES_TXSSCTYPE_SHIFT (1) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_TXSSCTYPE_MASK (0x00000002) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_RLLRATE_SHIFT (4) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_RLLRATE_MASK (0x000000F0) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO15GBPS_SHIFT (8) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO15GBPS_MASK (0x00000100) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW15GBPS_SHIFT (9) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW15GBPS_MASK (0x00000201) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO30GBPS_SHIFT (10) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO30GBPS_MASK (0x00000401) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW30GBPS_SHIFT (11) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW30GBPS_MASK (0x00000801) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO60GBPS_SHIFT (12) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SWO60GBPS_MASK (0x00001001) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW60GBPS_SHIFT (13) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_SW60GBPS_MASK (0x00002001) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_EVEN_PARITY_SHIFT (31) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_EVEN_PARITY_MASK (0x80000000) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_DEFAULT_MASK (0x00003F01) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_REQUIRED_MASK (0x00000001) +#define SCU_LINK_LAYER_PHY_CAPABILITIES_RESERVED_MASK (0x7FFFC00D) + +#define SCU_SAS_PHYCAP_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_LINK_LAYER_PHY_CAPABILITIES_ ## name, value) + +#define SCU_SAS_PHYCAP_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_LINK_LAYER_PHY_CAPABILITIES_ ## name) + + +#define SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_VIRTUAL_EXPANDER_PHY_ZONE_GROUP_SHIFT (0) +#define SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_VIRTUAL_EXPANDER_PHY_ZONE_GROUP_MASK (0x000000FF) +#define SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_INSIDE_SOURCE_ZONE_GROUP_SHIFT (31) +#define SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_INSIDE_SOURCE_ZONE_GROUP_MASK (0x80000000) +#define SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_RESERVED_MASK (0x7FFFFF00) + +#define SCU_PSZGCR_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_ ## name, value) + +#define SCU_PSZGCR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_LINK_LAYER_PHY_SOURCE_ZONE_GROUP_CONTROL_ ## name) + +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE0_LOCKED_SHIFT (1) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE0_LOCKED_MASK (0x00000002) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE0_UPDATING_SHIFT (2) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE0_UPDATING_MASK (0x00000004) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE1_LOCKED_SHIFT (4) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE1_LOCKED_MASK (0x00000010) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE1_UPDATING_SHIFT (5) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZONE1_UPDATING_MASK (0x00000020) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE0_SHIFT (16) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE0_MASK (0x00030000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE0_SHIFT (19) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE0_MASK (0x00080000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE1_SHIFT (20) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE1_MASK (0x00300000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE1_SHIFT (23) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE1_MASK (0x00800000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE2_SHIFT (24) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE2_MASK (0x03000000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE2_SHIFT (27) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE2_MASK (0x08000000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE3_SHIFT (28) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ZPT_ASSOCIATION_PE3_MASK (0x30000000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE3_SHIFT (31) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_AIP_ENABLE_PE3_MASK (0x80000000) +#define SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_RESERVED_MASK (0x4444FFC9) + +#define SCU_PEG_SCUVZECR_GEN_VAL(name, val) \ + SCU_GEN_VALUE(SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ ## name, val) + +#define SCU_PEG_SCUVZECR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_PROTOCOL_ENGINE_GROUP_VIRTUAL_ZONING_EXPANDER_CONTROL_ ## name) + + +/* + * ***************************************************************************** + * * Port Task Scheduler registers shift and mask values + * ***************************************************************************** */ +#define SCU_PTSG_CONTROL_IT_NEXUS_TIMEOUT_SHIFT (0) +#define SCU_PTSG_CONTROL_IT_NEXUS_TIMEOUT_MASK (0x0000FFFF) +#define SCU_PTSG_CONTROL_TASK_TIMEOUT_SHIFT (16) +#define SCU_PTSG_CONTROL_TASK_TIMEOUT_MASK (0x00FF0000) +#define SCU_PTSG_CONTROL_PTSG_ENABLE_SHIFT (24) +#define SCU_PTSG_CONTROL_PTSG_ENABLE_MASK (0x01000000) +#define SCU_PTSG_CONTROL_ETM_ENABLE_SHIFT (25) +#define SCU_PTSG_CONTROL_ETM_ENABLE_MASK (0x02000000) +#define SCU_PTSG_CONTROL_DEFAULT_MASK (0x00020002) +#define SCU_PTSG_CONTROL_REQUIRED_MASK (0x00000000) +#define SCU_PTSG_CONTROL_RESERVED_MASK (0xFC000000) + +#define SCU_PTSGCR_GEN_VAL(name, val) \ + SCU_GEN_VALUE(SCU_PTSG_CONTROL_ ## name, val) + +#define SCU_PTSGCR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_PTSG_CONTROL_ ## name) + + +/* ***************************************************************************** */ +#define SCU_PTSG_REAL_TIME_CLOCK_SHIFT (0) +#define SCU_PTSG_REAL_TIME_CLOCK_MASK (0x0000FFFF) +#define SCU_PTSG_REAL_TIME_CLOCK_RESERVED_MASK (0xFFFF0000) + +#define SCU_RTCR_GEN_VAL(name, val) \ + SCU_GEN_VALUE(SCU_PTSG_ ## name, val) + + +#define SCU_PTSG_REAL_TIME_CLOCK_CONTROL_PRESCALER_VALUE_SHIFT (0) +#define SCU_PTSG_REAL_TIME_CLOCK_CONTROL_PRESCALER_VALUE_MASK (0x00FFFFFF) +#define SCU_PTSG_REAL_TIME_CLOCK_CONTROL_RESERVED_MASK (0xFF000000) + +#define SCU_RTCCR_GEN_VAL(name, val) \ + SCU_GEN_VALUE(SCU_PTSG_REAL_TIME_CLOCK_CONTROL_ ## name, val) + + +#define SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_SUSPEND_SHIFT (0) +#define SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_SUSPEND_MASK (0x00000001) +#define SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_ENABLE_SHIFT (1) +#define SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_ENABLE_MASK (0x00000002) +#define SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_RESERVED_MASK (0xFFFFFFFC) + +#define SCU_PTSxCR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_PTSG_PORT_TASK_SCHEDULER_CONTROL_ ## name) + + +#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_NEXT_RN_VALID_SHIFT (0) +#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_NEXT_RN_VALID_MASK (0x00000001) +#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_ACTIVE_RNSC_LIST_VALID_SHIFT (1) +#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_ACTIVE_RNSC_LIST_VALID_MASK (0x00000002) +#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_PTS_SUSPENDED_SHIFT (2) +#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_PTS_SUSPENDED_MASK (0x00000004) +#define SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_RESERVED_MASK (0xFFFFFFF8) + +#define SCU_PTSxSR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_PTSG_PORT_TASK_SCHEDULER_STATUS_ ## name) + + +/* + * ***************************************************************************** + * * SGPIO Register shift and mask values + * ***************************************************************************** */ +#define SCU_SGPIO_CONTROL_SGPIO_ENABLE_SHIFT (0) +#define SCU_SGPIO_CONTROL_SGPIO_ENABLE_MASK (0x00000001) +#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_CLOCK_SELECT_SHIFT (1) +#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_CLOCK_SELECT_MASK (0x00000002) +#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_SHIFT_WIDTH_SELECT_SHIFT (2) +#define SCU_SGPIO_CONTROL_SGPIO_SERIAL_SHIFT_WIDTH_SELECT_MASK (0x00000004) +#define SCU_SGPIO_CONTROL_SGPIO_TEST_BIT_SHIFT (15) +#define SCU_SGPIO_CONTROL_SGPIO_TEST_BIT_MASK (0x00008000) +#define SCU_SGPIO_CONTROL_SGPIO_RESERVED_MASK (0xFFFF7FF8) + +#define SCU_SGICRx_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SGPIO_CONTROL_SGPIO_ ## name) + +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R0_SHIFT (0) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R0_MASK (0x0000000F) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R1_SHIFT (4) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R1_MASK (0x000000F0) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R2_SHIFT (8) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R2_MASK (0x00000F00) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R3_SHIFT (12) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_R3_MASK (0x0000F000) +#define SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_RESERVED_MASK (0xFFFF0000) + +#define SCU_SGPBRx_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SGPIO_PROGRAMMABLE_BLINK_REGISTER_ ## name, value) + +#define SCU_SGPIO_START_DRIVE_LOWER_R0_SHIFT (0) +#define SCU_SGPIO_START_DRIVE_LOWER_R0_MASK (0x00000003) +#define SCU_SGPIO_START_DRIVE_LOWER_R1_SHIFT (4) +#define SCU_SGPIO_START_DRIVE_LOWER_R1_MASK (0x00000030) +#define SCU_SGPIO_START_DRIVE_LOWER_R2_SHIFT (8) +#define SCU_SGPIO_START_DRIVE_LOWER_R2_MASK (0x00000300) +#define SCU_SGPIO_START_DRIVE_LOWER_R3_SHIFT (12) +#define SCU_SGPIO_START_DRIVE_LOWER_R3_MASK (0x00003000) +#define SCU_SGPIO_START_DRIVE_LOWER_RESERVED_MASK (0xFFFF8888) + +#define SCU_SGSDLRx_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SGPIO_START_DRIVE_LOWER_ ## name, value) + +#define SCU_SGPIO_START_DRIVE_UPPER_R0_SHIFT (0) +#define SCU_SGPIO_START_DRIVE_UPPER_R0_MASK (0x00000003) +#define SCU_SGPIO_START_DRIVE_UPPER_R1_SHIFT (4) +#define SCU_SGPIO_START_DRIVE_UPPER_R1_MASK (0x00000030) +#define SCU_SGPIO_START_DRIVE_UPPER_R2_SHIFT (8) +#define SCU_SGPIO_START_DRIVE_UPPER_R2_MASK (0x00000300) +#define SCU_SGPIO_START_DRIVE_UPPER_R3_SHIFT (12) +#define SCU_SGPIO_START_DRIVE_UPPER_R3_MASK (0x00003000) +#define SCU_SGPIO_START_DRIVE_UPPER_RESERVED_MASK (0xFFFF8888) + +#define SCU_SGSDURx_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SGPIO_START_DRIVE_LOWER_ ## name, value) + +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D0_SHIFT (0) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D0_MASK (0x00000003) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D1_SHIFT (4) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D1_MASK (0x00000030) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D2_SHIFT (8) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D2_MASK (0x00000300) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D3_SHIFT (12) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_D3_MASK (0x00003000) +#define SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_RESERVED_MASK (0xFFFF8888) + +#define SCU_SGSIDLRx_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_ ## name, value) + +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D0_SHIFT (0) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D0_MASK (0x00000003) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D1_SHIFT (4) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D1_MASK (0x00000030) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D2_SHIFT (8) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D2_MASK (0x00000300) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D3_SHIFT (12) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_D3_MASK (0x00003000) +#define SCU_SGPIO_SERIAL_INPUT_DATA_UPPER_RESERVED_MASK (0xFFFF8888) + +#define SCU_SGSIDURx_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SGPIO_SERIAL_INPUT_DATA_LOWER_ ## name, value) + +#define SCU_SGPIO_VENDOR_SPECIFIC_CODE_SHIFT (0) +#define SCU_SGPIO_VENDOR_SPECIFIC_CODE_MASK (0x0000000F) +#define SCU_SGPIO_VENDOR_SPECIFIC_CODE_RESERVED_MASK (0xFFFFFFF0) + +#define SCU_SGVSCR_GEN_VAL(value) \ + SCU_GEN_VALUE(SCU_SGPIO_VENDOR_SPECIFIC_CODE ## name, value) + +#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA0_SHIFT (0) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA0_MASK (0x00000003) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA0_SHIFT (2) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA0_MASK (0x00000004) +#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA0_SHIFT (3) +#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA0_MASK (0x00000008) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA1_SHIFT (4) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA1_MASK (0x00000030) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA1_SHIFT (6) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA1_MASK (0x00000040) +#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA1_SHIFT (7) +#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA1_MASK (0x00000080) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA2_SHIFT (8) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INPUT_DATA2_MASK (0x00000300) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA2_SHIFT (10) +#define SCU_SGPIO_OUPUT_DATA_SELECT_INVERT_INPUT_DATA2_MASK (0x00000400) +#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA2_SHIFT (11) +#define SCU_SGPIO_OUPUT_DATA_SELECT_JOG_ENABLE_DATA2_MASK (0x00000800) +#define SCU_SGPIO_OUPUT_DATA_SELECT_RESERVED_MASK (0xFFFFF000) + +#define SCU_SGODSR_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SGPIO_OUPUT_DATA_SELECT_ ## name, value) + +#define SCU_SGODSR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SGPIO_OUPUT_DATA_SELECT_ ## name) + +/* + * ***************************************************************************** + * * SMU Registers + * ***************************************************************************** */ + +/* + * ---------------------------------------------------------------------------- + * SMU Registers + * These registers are based off of BAR0 + * + * To calculate the offset for other functions use + * BAR0 + FN# * SystemPageSize * 2 + * + * The TCA is only accessable from FN#0 (Physical Function) and each + * is programmed by (BAR0 + SCU_SMU_TCA_OFFSET + (FN# * 0x04)) or + * TCA0 for FN#0 is at BAR0 + 0x0400 + * TCA1 for FN#1 is at BAR0 + 0x0404 + * etc. + * ---------------------------------------------------------------------------- + * Accessable to all FN#s */ +#define SCU_SMU_PCP_OFFSET 0x0000 +#define SCU_SMU_AMR_OFFSET 0x0004 +#define SCU_SMU_ISR_OFFSET 0x0010 +#define SCU_SMU_IMR_OFFSET 0x0014 +#define SCU_SMU_ICC_OFFSET 0x0018 +#define SCU_SMU_HTTLBAR_OFFSET 0x0020 +#define SCU_SMU_HTTUBAR_OFFSET 0x0024 +#define SCU_SMU_TCR_OFFSET 0x0028 +#define SCU_SMU_CQLBAR_OFFSET 0x0030 +#define SCU_SMU_CQUBAR_OFFSET 0x0034 +#define SCU_SMU_CQPR_OFFSET 0x0040 +#define SCU_SMU_CQGR_OFFSET 0x0044 +#define SCU_SMU_CQC_OFFSET 0x0048 +/* Accessable to FN#0 only */ +#define SCU_SMU_RNCLBAR_OFFSET 0x0080 +#define SCU_SMU_RNCUBAR_OFFSET 0x0084 +#define SCU_SMU_DCC_OFFSET 0x0090 +#define SCU_SMU_DFC_OFFSET 0x0094 +#define SCU_SMU_SMUCSR_OFFSET 0x0098 +#define SCU_SMU_SCUSRCR_OFFSET 0x009C +#define SCU_SMU_SMAW_OFFSET 0x00A0 +#define SCU_SMU_SMDW_OFFSET 0x00A4 +/* Accessable to FN#0 only */ +#define SCU_SMU_TCA_OFFSET 0x0400 +/* Accessable to all FN#s */ +#define SCU_SMU_MT_MLAR0_OFFSET 0x2000 +#define SCU_SMU_MT_MUAR0_OFFSET 0x2004 +#define SCU_SMU_MT_MDR0_OFFSET 0x2008 +#define SCU_SMU_MT_VCR0_OFFSET 0x200C +#define SCU_SMU_MT_MLAR1_OFFSET 0x2010 +#define SCU_SMU_MT_MUAR1_OFFSET 0x2014 +#define SCU_SMU_MT_MDR1_OFFSET 0x2018 +#define SCU_SMU_MT_VCR1_OFFSET 0x201C +#define SCU_SMU_MPBA_OFFSET 0x3000 + +/** + * struct smu_registers - These are the SMU registers + * + * + */ +struct smu_registers { +/* 0x0000 PCP */ + u32 post_context_port; +/* 0x0004 AMR */ + u32 address_modifier; + u32 reserved_08; + u32 reserved_0C; +/* 0x0010 ISR */ + u32 interrupt_status; +/* 0x0014 IMR */ + u32 interrupt_mask; +/* 0x0018 ICC */ + u32 interrupt_coalesce_control; + u32 reserved_1C; +/* 0x0020 HTTLBAR */ + u32 host_task_table_lower; +/* 0x0024 HTTUBAR */ + u32 host_task_table_upper; +/* 0x0028 TCR */ + u32 task_context_range; + u32 reserved_2C; +/* 0x0030 CQLBAR */ + u32 completion_queue_lower; +/* 0x0034 CQUBAR */ + u32 completion_queue_upper; + u32 reserved_38; + u32 reserved_3C; +/* 0x0040 CQPR */ + u32 completion_queue_put; +/* 0x0044 CQGR */ + u32 completion_queue_get; +/* 0x0048 CQC */ + u32 completion_queue_control; + u32 reserved_4C; + u32 reserved_5x[4]; + u32 reserved_6x[4]; + u32 reserved_7x[4]; +/* + * Accessable to FN#0 only + * 0x0080 RNCLBAR */ + u32 remote_node_context_lower; +/* 0x0084 RNCUBAR */ + u32 remote_node_context_upper; + u32 reserved_88; + u32 reserved_8C; +/* 0x0090 DCC */ + u32 device_context_capacity; +/* 0x0094 DFC */ + u32 device_function_capacity; +/* 0x0098 SMUCSR */ + u32 control_status; +/* 0x009C SCUSRCR */ + u32 soft_reset_control; +/* 0x00A0 SMAW */ + u32 mmr_address_window; +/* 0x00A4 SMDW */ + u32 mmr_data_window; + u32 reserved_A8; + u32 reserved_AC; +/* A whole bunch of reserved space */ + u32 reserved_Bx[4]; + u32 reserved_Cx[4]; + u32 reserved_Dx[4]; + u32 reserved_Ex[4]; + u32 reserved_Fx[4]; + u32 reserved_1xx[64]; + u32 reserved_2xx[64]; + u32 reserved_3xx[64]; +/* + * Accessable to FN#0 only + * 0x0400 TCA */ + u32 task_context_assignment[256]; +/* MSI-X registers not included */ +}; + +/* + * ***************************************************************************** + * SDMA Registers + * ***************************************************************************** */ +#define SCU_SDMA_BASE 0x6000 +#define SCU_SDMA_PUFATLHAR_OFFSET 0x0000 +#define SCU_SDMA_PUFATUHAR_OFFSET 0x0004 +#define SCU_SDMA_UFLHBAR_OFFSET 0x0008 +#define SCU_SDMA_UFUHBAR_OFFSET 0x000C +#define SCU_SDMA_UFQC_OFFSET 0x0010 +#define SCU_SDMA_UFQPP_OFFSET 0x0014 +#define SCU_SDMA_UFQGP_OFFSET 0x0018 +#define SCU_SDMA_PDMACR_OFFSET 0x001C +#define SCU_SDMA_CDMACR_OFFSET 0x0080 + +/** + * struct scu_sdma_registers - These are the SCU SDMA Registers + * + * + */ +struct scu_sdma_registers { +/* 0x0000 PUFATLHAR */ + u32 uf_address_table_lower; +/* 0x0004 PUFATUHAR */ + u32 uf_address_table_upper; +/* 0x0008 UFLHBAR */ + u32 uf_header_base_address_lower; +/* 0x000C UFUHBAR */ + u32 uf_header_base_address_upper; +/* 0x0010 UFQC */ + u32 unsolicited_frame_queue_control; +/* 0x0014 UFQPP */ + u32 unsolicited_frame_put_pointer; +/* 0x0018 UFQGP */ + u32 unsolicited_frame_get_pointer; +/* 0x001C PDMACR */ + u32 pdma_configuration; +/* Reserved until offset 0x80 */ + u32 reserved_0020_007C[0x18]; +/* 0x0080 CDMACR */ + u32 cdma_configuration; +/* Remainder SDMA register space */ + u32 reserved_0084_0400[0xDF]; + +}; + +/* + * ***************************************************************************** + * * SCU Link Registers + * ***************************************************************************** */ +#define SCU_PEG0_OFFSET 0x0000 +#define SCU_PEG1_OFFSET 0x8000 + +#define SCU_TL0_OFFSET 0x0000 +#define SCU_TL1_OFFSET 0x0400 +#define SCU_TL2_OFFSET 0x0800 +#define SCU_TL3_OFFSET 0x0C00 + +#define SCU_LL_OFFSET 0x0080 +#define SCU_LL0_OFFSET (SCU_TL0_OFFSET + SCU_LL_OFFSET) +#define SCU_LL1_OFFSET (SCU_TL1_OFFSET + SCU_LL_OFFSET) +#define SCU_LL2_OFFSET (SCU_TL2_OFFSET + SCU_LL_OFFSET) +#define SCU_LL3_OFFSET (SCU_TL3_OFFSET + SCU_LL_OFFSET) + +/* Transport Layer Offsets (PEG + TL) */ +#define SCU_TLCR_OFFSET 0x0000 +#define SCU_TLADTR_OFFSET 0x0004 +#define SCU_TLTTMR_OFFSET 0x0008 +#define SCU_TLEECR0_OFFSET 0x000C +#define SCU_STPTLDARNI_OFFSET 0x0010 + + +#define SCU_TLCR_HASH_SAS_CHECKING_ENABLE_SHIFT (0) +#define SCU_TLCR_HASH_SAS_CHECKING_ENABLE_MASK (0x00000001) +#define SCU_TLCR_CLEAR_TCI_NCQ_MAPPING_TABLE_SHIFT (1) +#define SCU_TLCR_CLEAR_TCI_NCQ_MAPPING_TABLE_MASK (0x00000002) +#define SCU_TLCR_STP_WRITE_DATA_PREFETCH_SHIFT (3) +#define SCU_TLCR_STP_WRITE_DATA_PREFETCH_MASK (0x00000008) +#define SCU_TLCR_CMD_NAK_STATUS_CODE_SHIFT (4) +#define SCU_TLCR_CMD_NAK_STATUS_CODE_MASK (0x00000010) +#define SCU_TLCR_RESERVED_MASK (0xFFFFFFEB) + +#define SCU_TLCR_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_TLCR_ ## name) + +/** + * struct scu_transport_layer_registers - These are the SCU Transport Layer + * registers + * + * + */ +struct scu_transport_layer_registers { + /* 0x0000 TLCR */ + u32 control; + /* 0x0004 TLADTR */ + u32 arbitration_delay_timer; + /* 0x0008 TLTTMR */ + u32 timer_test_mode; + /* 0x000C reserved */ + u32 reserved_0C; + /* 0x0010 STPTLDARNI */ + u32 stp_rni; + /* 0x0014 TLFEWPORCTRL */ + u32 tlfe_wpo_read_control; + /* 0x0018 TLFEWPORDATA */ + u32 tlfe_wpo_read_data; + /* 0x001C RXTLSSCSR1 */ + u32 rxtl_single_step_control_status_1; + /* 0x0020 RXTLSSCSR2 */ + u32 rxtl_single_step_control_status_2; + /* 0x0024 AWTRDDCR */ + u32 tlfe_awt_retry_delay_debug_control; + /* Remainder of TL memory space */ + u32 reserved_0028_007F[0x16]; + +}; + +/* Protocol Engine Group Registers */ +#define SCU_SCUVZECRx_OFFSET 0x1080 + +/* Link Layer Offsets (PEG + TL + LL) */ +#define SCU_SAS_SPDTOV_OFFSET 0x0000 +#define SCU_SAS_LLSTA_OFFSET 0x0004 +#define SCU_SATA_PSELTOV_OFFSET 0x0008 +#define SCU_SAS_TIMETOV_OFFSET 0x0010 +#define SCU_SAS_LOSTOT_OFFSET 0x0014 +#define SCU_SAS_LNKTOV_OFFSET 0x0018 +#define SCU_SAS_PHYTOV_OFFSET 0x001C +#define SCU_SAS_AFERCNT_OFFSET 0x0020 +#define SCU_SAS_WERCNT_OFFSET 0x0024 +#define SCU_SAS_TIID_OFFSET 0x0028 +#define SCU_SAS_TIDNH_OFFSET 0x002C +#define SCU_SAS_TIDNL_OFFSET 0x0030 +#define SCU_SAS_TISSAH_OFFSET 0x0034 +#define SCU_SAS_TISSAL_OFFSET 0x0038 +#define SCU_SAS_TIPID_OFFSET 0x003C +#define SCU_SAS_TIRES2_OFFSET 0x0040 +#define SCU_SAS_ADRSTA_OFFSET 0x0044 +#define SCU_SAS_MAWTTOV_OFFSET 0x0048 +#define SCU_SAS_FRPLDFIL_OFFSET 0x0054 +#define SCU_SAS_RFCNT_OFFSET 0x0060 +#define SCU_SAS_TFCNT_OFFSET 0x0064 +#define SCU_SAS_RFDCNT_OFFSET 0x0068 +#define SCU_SAS_TFDCNT_OFFSET 0x006C +#define SCU_SAS_LERCNT_OFFSET 0x0070 +#define SCU_SAS_RDISERRCNT_OFFSET 0x0074 +#define SCU_SAS_CRERCNT_OFFSET 0x0078 +#define SCU_STPCTL_OFFSET 0x007C +#define SCU_SAS_PCFG_OFFSET 0x0080 +#define SCU_SAS_CLKSM_OFFSET 0x0084 +#define SCU_SAS_TXCOMWAKE_OFFSET 0x0088 +#define SCU_SAS_TXCOMINIT_OFFSET 0x008C +#define SCU_SAS_TXCOMSAS_OFFSET 0x0090 +#define SCU_SAS_COMINIT_OFFSET 0x0094 +#define SCU_SAS_COMWAKE_OFFSET 0x0098 +#define SCU_SAS_COMSAS_OFFSET 0x009C +#define SCU_SAS_SFERCNT_OFFSET 0x00A0 +#define SCU_SAS_CDFERCNT_OFFSET 0x00A4 +#define SCU_SAS_DNFERCNT_OFFSET 0x00A8 +#define SCU_SAS_PRSTERCNT_OFFSET 0x00AC +#define SCU_SAS_CNTCTL_OFFSET 0x00B0 +#define SCU_SAS_SSPTOV_OFFSET 0x00B4 +#define SCU_FTCTL_OFFSET 0x00B8 +#define SCU_FRCTL_OFFSET 0x00BC +#define SCU_FTWMRK_OFFSET 0x00C0 +#define SCU_ENSPINUP_OFFSET 0x00C4 +#define SCU_SAS_TRNTOV_OFFSET 0x00C8 +#define SCU_SAS_PHYCAP_OFFSET 0x00CC +#define SCU_SAS_PHYCTL_OFFSET 0x00D0 +#define SCU_SAS_LLCTL_OFFSET 0x00D8 +#define SCU_AFE_XCVRCR_OFFSET 0x00DC +#define SCU_AFE_LUTCR_OFFSET 0x00E0 + +#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_SHIFT (0) +#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_MASK (0x00000003) +#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1 (0) +#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN2 (1) +#define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN3 (2) +#define SCU_SAS_LINK_LAYER_CONTROL_BROADCAST_PRIMITIVE_SHIFT (2) +#define SCU_SAS_LINK_LAYER_CONTROL_BROADCAST_PRIMITIVE_MASK (0x000003FC) +#define SCU_SAS_LINK_LAYER_CONTROL_CLOSE_NO_ACTIVE_TASK_DISABLE_SHIFT (16) +#define SCU_SAS_LINK_LAYER_CONTROL_CLOSE_NO_ACTIVE_TASK_DISABLE_MASK (0x00010000) +#define SCU_SAS_LINK_LAYER_CONTROL_CLOSE_NO_OUTBOUND_TASK_DISABLE_SHIFT (17) +#define SCU_SAS_LINK_LAYER_CONTROL_CLOSE_NO_OUTBOUND_TASK_DISABLE_MASK (0x00020000) +#define SCU_SAS_LINK_LAYER_CONTROL_NO_OUTBOUND_TASK_TIMEOUT_SHIFT (24) +#define SCU_SAS_LINK_LAYER_CONTROL_NO_OUTBOUND_TASK_TIMEOUT_MASK (0xFF000000) +#define SCU_SAS_LINK_LAYER_CONTROL_RESERVED (0x00FCFC00) + +#define SCU_SAS_LLCTL_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SAS_LINK_LAYER_CONTROL_ ## name, value) + +#define SCU_SAS_LLCTL_GEN_BIT(name) \ + SCU_GEN_BIT(SCU_SAS_LINK_LAYER_CONTROL_ ## name) + + +/* #define SCU_FRXHECR_DCNT_OFFSET 0x00B0 */ +#define SCU_PSZGCR_OFFSET 0x00E4 +#define SCU_SAS_RECPHYCAP_OFFSET 0x00E8 +/* #define SCU_TX_LUTSEL_OFFSET 0x00B8 */ + +#define SCU_SAS_PTxC_OFFSET 0x00D4 /* Same offset as SAS_TCTSTM */ + +/** + * struct scu_link_layer_registers - SCU Link Layer Registers + * + * + */ +struct scu_link_layer_registers { +/* 0x0000 SAS_SPDTOV */ + u32 speed_negotiation_timers; +/* 0x0004 SAS_LLSTA */ + u32 link_layer_status; +/* 0x0008 SATA_PSELTOV */ + u32 port_selector_timeout; + u32 reserved0C; +/* 0x0010 SAS_TIMETOV */ + u32 timeout_unit_value; +/* 0x0014 SAS_RCDTOV */ + u32 rcd_timeout; +/* 0x0018 SAS_LNKTOV */ + u32 link_timer_timeouts; +/* 0x001C SAS_PHYTOV */ + u32 sas_phy_timeouts; +/* 0x0020 SAS_AFERCNT */ + u32 received_address_frame_error_counter; +/* 0x0024 SAS_WERCNT */ + u32 invalid_dword_counter; +/* 0x0028 SAS_TIID */ + u32 transmit_identification; +/* 0x002C SAS_TIDNH */ + u32 sas_device_name_high; +/* 0x0030 SAS_TIDNL */ + u32 sas_device_name_low; +/* 0x0034 SAS_TISSAH */ + u32 source_sas_address_high; +/* 0x0038 SAS_TISSAL */ + u32 source_sas_address_low; +/* 0x003C SAS_TIPID */ + u32 identify_frame_phy_id; +/* 0x0040 SAS_TIRES2 */ + u32 identify_frame_reserved; +/* 0x0044 SAS_ADRSTA */ + u32 received_address_frame; +/* 0x0048 SAS_MAWTTOV */ + u32 maximum_arbitration_wait_timer_timeout; +/* 0x004C SAS_PTxC */ + u32 transmit_primitive; +/* 0x0050 SAS_RORES */ + u32 error_counter_event_notification_control; +/* 0x0054 SAS_FRPLDFIL */ + u32 frxq_payload_fill_threshold; +/* 0x0058 SAS_LLHANG_TOT */ + u32 link_layer_hang_detection_timeout; + u32 reserved_5C; +/* 0x0060 SAS_RFCNT */ + u32 received_frame_count; +/* 0x0064 SAS_TFCNT */ + u32 transmit_frame_count; +/* 0x0068 SAS_RFDCNT */ + u32 received_dword_count; +/* 0x006C SAS_TFDCNT */ + u32 transmit_dword_count; +/* 0x0070 SAS_LERCNT */ + u32 loss_of_sync_error_count; +/* 0x0074 SAS_RDISERRCNT */ + u32 running_disparity_error_count; +/* 0x0078 SAS_CRERCNT */ + u32 received_frame_crc_error_count; +/* 0x007C STPCTL */ + u32 stp_control; +/* 0x0080 SAS_PCFG */ + u32 phy_configuration; +/* 0x0084 SAS_CLKSM */ + u32 clock_skew_management; +/* 0x0088 SAS_TXCOMWAKE */ + u32 transmit_comwake_signal; +/* 0x008C SAS_TXCOMINIT */ + u32 transmit_cominit_signal; +/* 0x0090 SAS_TXCOMSAS */ + u32 transmit_comsas_signal; +/* 0x0094 SAS_COMINIT */ + u32 cominit_control; +/* 0x0098 SAS_COMWAKE */ + u32 comwake_control; +/* 0x009C SAS_COMSAS */ + u32 comsas_control; +/* 0x00A0 SAS_SFERCNT */ + u32 received_short_frame_count; +/* 0x00A4 SAS_CDFERCNT */ + u32 received_frame_without_credit_count; +/* 0x00A8 SAS_DNFERCNT */ + u32 received_frame_after_done_count; +/* 0x00AC SAS_PRSTERCNT */ + u32 phy_reset_problem_count; +/* 0x00B0 SAS_CNTCTL */ + u32 counter_control; +/* 0x00B4 SAS_SSPTOV */ + u32 ssp_timer_timeout_values; +/* 0x00B8 FTCTL */ + u32 ftx_control; +/* 0x00BC FRCTL */ + u32 frx_control; +/* 0x00C0 FTWMRK */ + u32 ftx_watermark; +/* 0x00C4 ENSPINUP */ + u32 notify_enable_spinup_control; +/* 0x00C8 SAS_TRNTOV */ + u32 sas_training_sequence_timer_values; +/* 0x00CC SAS_PHYCAP */ + u32 phy_capabilities; +/* 0x00D0 SAS_PHYCTL */ + u32 phy_control; + u32 reserved_d4; +/* 0x00D8 LLCTL */ + u32 link_layer_control; +/* 0x00DC AFE_XCVRCR */ + u32 afe_xcvr_control; +/* 0x00E0 AFE_LUTCR */ + u32 afe_lookup_table_control; +/* 0x00E4 PSZGCR */ + u32 phy_source_zone_group_control; +/* 0x00E8 SAS_RECPHYCAP */ + u32 receive_phycap; + u32 reserved_ec; +/* 0x00F0 SNAFERXRSTCTL */ + u32 speed_negotiation_afe_rx_reset_control; +/* 0x00F4 SAS_SSIPMCTL */ + u32 power_management_control; +/* 0x00F8 SAS_PSPREQ_PRIM */ + u32 sas_pm_partial_request_primitive; +/* 0x00FC SAS_PSSREQ_PRIM */ + u32 sas_pm_slumber_request_primitive; +/* 0x0100 SAS_PPSACK_PRIM */ + u32 sas_pm_ack_primitive_register; +/* 0x0104 SAS_PSNAK_PRIM */ + u32 sas_pm_nak_primitive_register; +/* 0x0108 SAS_SSIPMTOV */ + u32 sas_primitive_timeout; + u32 reserved_10c; +/* 0x0110 - 0x011C PLAPRDCTRLxREG */ + u32 pla_product_control[4]; +/* 0x0120 PLAPRDSUMREG */ + u32 pla_product_sum; +/* 0x0124 PLACONTROLREG */ + u32 pla_control; +/* Remainder of memory space 896 bytes */ + u32 reserved_0128_037f[0x96]; + +}; + +/* + * 0x00D4 // Same offset as SAS_TCTSTM SAS_PTxC + * u32 primitive_transmit_control; */ + +/* + * ---------------------------------------------------------------------------- + * SGPIO + * ---------------------------------------------------------------------------- */ +#define SCU_SGPIO_OFFSET 0x1400 + +/* #define SCU_SGPIO_OFFSET 0x6000 // later moves to 0x1400 see HSD 652625 */ +#define SCU_SGPIO_SGICR_OFFSET 0x0000 +#define SCU_SGPIO_SGPBR_OFFSET 0x0004 +#define SCU_SGPIO_SGSDLR_OFFSET 0x0008 +#define SCU_SGPIO_SGSDUR_OFFSET 0x000C +#define SCU_SGPIO_SGSIDLR_OFFSET 0x0010 +#define SCU_SGPIO_SGSIDUR_OFFSET 0x0014 +#define SCU_SGPIO_SGVSCR_OFFSET 0x0018 +/* Address from 0x0820 to 0x083C */ +#define SCU_SGPIO_SGODSR_OFFSET 0x0020 + +/** + * struct scu_sgpio_registers - SCU SGPIO Registers + * + * + */ +struct scu_sgpio_registers { +/* 0x0000 SGPIO_SGICR */ + u32 interface_control; +/* 0x0004 SGPIO_SGPBR */ + u32 blink_rate; +/* 0x0008 SGPIO_SGSDLR */ + u32 start_drive_lower; +/* 0x000C SGPIO_SGSDUR */ + u32 start_drive_upper; +/* 0x0010 SGPIO_SGSIDLR */ + u32 serial_input_lower; +/* 0x0014 SGPIO_SGSIDUR */ + u32 serial_input_upper; +/* 0x0018 SGPIO_SGVSCR */ + u32 vendor_specific_code; +/* 0x0020 SGPIO_SGODSR */ + u32 ouput_data_select[8]; +/* Remainder of memory space 256 bytes */ + u32 reserved_1444_14ff[0x31]; + +}; + +/* + * ***************************************************************************** + * * Defines for VIIT entry offsets + * * Access additional entries by SCU_VIIT_BASE + index * 0x10 + * ***************************************************************************** */ +#define SCU_VIIT_BASE 0x1c00 + +struct scu_viit_registers { + u32 registers[256]; +}; + +/* + * ***************************************************************************** + * * SCU PORT TASK SCHEDULER REGISTERS + * ***************************************************************************** */ + +#define SCU_PTSG_BASE 0x1000 + +#define SCU_PTSG_PTSGCR_OFFSET 0x0000 +#define SCU_PTSG_RTCR_OFFSET 0x0004 +#define SCU_PTSG_RTCCR_OFFSET 0x0008 +#define SCU_PTSG_PTS0CR_OFFSET 0x0010 +#define SCU_PTSG_PTS0SR_OFFSET 0x0014 +#define SCU_PTSG_PTS1CR_OFFSET 0x0018 +#define SCU_PTSG_PTS1SR_OFFSET 0x001C +#define SCU_PTSG_PTS2CR_OFFSET 0x0020 +#define SCU_PTSG_PTS2SR_OFFSET 0x0024 +#define SCU_PTSG_PTS3CR_OFFSET 0x0028 +#define SCU_PTSG_PTS3SR_OFFSET 0x002C +#define SCU_PTSG_PCSPE0CR_OFFSET 0x0030 +#define SCU_PTSG_PCSPE1CR_OFFSET 0x0034 +#define SCU_PTSG_PCSPE2CR_OFFSET 0x0038 +#define SCU_PTSG_PCSPE3CR_OFFSET 0x003C +#define SCU_PTSG_ETMTSCCR_OFFSET 0x0040 +#define SCU_PTSG_ETMRNSCCR_OFFSET 0x0044 + +/** + * struct scu_port_task_scheduler_registers - These are the control/stats pairs + * for each Port Task Scheduler. + * + * + */ +struct scu_port_task_scheduler_registers { + u32 control; + u32 status; +}; + +/** + * struct scu_port_task_scheduler_group_registers - These are the PORT Task + * Scheduler registers + * + * + */ +struct scu_port_task_scheduler_group_registers { +/* 0x0000 PTSGCR */ + u32 control; +/* 0x0004 RTCR */ + u32 real_time_clock; +/* 0x0008 RTCCR */ + u32 real_time_clock_control; +/* 0x000C */ + u32 reserved_0C; +/* + * 0x0010 PTS0CR + * 0x0014 PTS0SR + * 0x0018 PTS1CR + * 0x001C PTS1SR + * 0x0020 PTS2CR + * 0x0024 PTS2SR + * 0x0028 PTS3CR + * 0x002C PTS3SR */ + struct scu_port_task_scheduler_registers port[4]; +/* + * 0x0030 PCSPE0CR + * 0x0034 PCSPE1CR + * 0x0038 PCSPE2CR + * 0x003C PCSPE3CR */ + u32 protocol_engine[4]; +/* 0x0040 ETMTSCCR */ + u32 tc_scanning_interval_control; +/* 0x0044 ETMRNSCCR */ + u32 rnc_scanning_interval_control; +/* Remainder of memory space 128 bytes */ + u32 reserved_1048_107f[0x0E]; + +}; + +#define SCU_PTSG_SCUVZECR_OFFSET 0x003C + +/* + * ***************************************************************************** + * * AFE REGISTERS + * ***************************************************************************** */ +#define SCU_AFE_MMR_BASE 0xE000 + +/* + * AFE 0 is at offset 0x0800 + * AFE 1 is at offset 0x0900 + * AFE 2 is at offset 0x0a00 + * AFE 3 is at offset 0x0b00 */ +struct scu_afe_transceiver { + /* 0x0000 AFE_XCVR_CTRL0 */ + u32 afe_xcvr_control0; + /* 0x0004 AFE_XCVR_CTRL1 */ + u32 afe_xcvr_control1; + /* 0x0008 */ + u32 reserved_0008; + /* 0x000c afe_dfx_rx_control0 */ + u32 afe_dfx_rx_control0; + /* 0x0010 AFE_DFX_RX_CTRL1 */ + u32 afe_dfx_rx_control1; + /* 0x0014 */ + u32 reserved_0014; + /* 0x0018 AFE_DFX_RX_STS0 */ + u32 afe_dfx_rx_status0; + /* 0x001c AFE_DFX_RX_STS1 */ + u32 afe_dfx_rx_status1; + /* 0x0020 */ + u32 reserved_0020; + /* 0x0024 AFE_TX_CTRL */ + u32 afe_tx_control; + /* 0x0028 AFE_TX_AMP_CTRL0 */ + u32 afe_tx_amp_control0; + /* 0x002c AFE_TX_AMP_CTRL1 */ + u32 afe_tx_amp_control1; + /* 0x0030 AFE_TX_AMP_CTRL2 */ + u32 afe_tx_amp_control2; + /* 0x0034 AFE_TX_AMP_CTRL3 */ + u32 afe_tx_amp_control3; + /* 0x0038 afe_tx_ssc_control */ + u32 afe_tx_ssc_control; + /* 0x003c */ + u32 reserved_003c; + /* 0x0040 AFE_RX_SSC_CTRL0 */ + u32 afe_rx_ssc_control0; + /* 0x0044 AFE_RX_SSC_CTRL1 */ + u32 afe_rx_ssc_control1; + /* 0x0048 AFE_RX_SSC_CTRL2 */ + u32 afe_rx_ssc_control2; + /* 0x004c AFE_RX_EQ_STS0 */ + u32 afe_rx_eq_status0; + /* 0x0050 AFE_RX_EQ_STS1 */ + u32 afe_rx_eq_status1; + /* 0x0054 AFE_RX_CDR_STS */ + u32 afe_rx_cdr_status; + /* 0x0058 */ + u32 reserved_0058; + /* 0x005c AFE_CHAN_CTRL */ + u32 afe_channel_control; + /* 0x0060-0x006c */ + u32 reserved_0060_006c[0x04]; + /* 0x0070 AFE_XCVR_EC_STS0 */ + u32 afe_xcvr_error_capture_status0; + /* 0x0074 AFE_XCVR_EC_STS1 */ + u32 afe_xcvr_error_capture_status1; + /* 0x0078 AFE_XCVR_EC_STS2 */ + u32 afe_xcvr_error_capture_status2; + /* 0x007c afe_xcvr_ec_status3 */ + u32 afe_xcvr_error_capture_status3; + /* 0x0080 AFE_XCVR_EC_STS4 */ + u32 afe_xcvr_error_capture_status4; + /* 0x0084 AFE_XCVR_EC_STS5 */ + u32 afe_xcvr_error_capture_status5; + /* 0x0088-0x00fc */ + u32 reserved_008c_00fc[0x1e]; +}; + +/** + * struct scu_afe_registers - AFE Regsiters + * + * + */ +/* Uaoa AFE registers */ +struct scu_afe_registers { + /* 0Xe000 AFE_BIAS_CTRL */ + u32 afe_bias_control; + u32 reserved_0004; + /* 0x0008 AFE_PLL_CTRL0 */ + u32 afe_pll_control0; + /* 0x000c AFE_PLL_CTRL1 */ + u32 afe_pll_control1; + /* 0x0010 AFE_PLL_CTRL2 */ + u32 afe_pll_control2; + /* 0x0014 AFE_CB_STS */ + u32 afe_common_block_status; + /* 0x0018-0x007c */ + u32 reserved_18_7c[0x1a]; + /* 0x0080 AFE_PMSN_MCTRL0 */ + u32 afe_pmsn_master_control0; + /* 0x0084 AFE_PMSN_MCTRL1 */ + u32 afe_pmsn_master_control1; + /* 0x0088 AFE_PMSN_MCTRL2 */ + u32 afe_pmsn_master_control2; + /* 0x008C-0x00fc */ + u32 reserved_008c_00fc[0x1D]; + /* 0x0100 AFE_DFX_MST_CTRL0 */ + u32 afe_dfx_master_control0; + /* 0x0104 AFE_DFX_MST_CTRL1 */ + u32 afe_dfx_master_control1; + /* 0x0108 AFE_DFX_DCL_CTRL */ + u32 afe_dfx_dcl_control; + /* 0x010c AFE_DFX_DMON_CTRL */ + u32 afe_dfx_digital_monitor_control; + /* 0x0110 AFE_DFX_AMONP_CTRL */ + u32 afe_dfx_analog_p_monitor_control; + /* 0x0114 AFE_DFX_AMONN_CTRL */ + u32 afe_dfx_analog_n_monitor_control; + /* 0x0118 AFE_DFX_NTL_STS */ + u32 afe_dfx_ntl_status; + /* 0x011c AFE_DFX_FIFO_STS0 */ + u32 afe_dfx_fifo_status0; + /* 0x0120 AFE_DFX_FIFO_STS1 */ + u32 afe_dfx_fifo_status1; + /* 0x0124 AFE_DFX_MPAT_CTRL */ + u32 afe_dfx_master_pattern_control; + /* 0x0128 AFE_DFX_P0_CTRL */ + u32 afe_dfx_p0_control; + /* 0x012c-0x01a8 AFE_DFX_P0_DRx */ + u32 afe_dfx_p0_data[32]; + /* 0x01ac */ + u32 reserved_01ac; + /* 0x01b0-0x020c AFE_DFX_P0_IRx */ + u32 afe_dfx_p0_instruction[24]; + /* 0x0210 */ + u32 reserved_0210; + /* 0x0214 AFE_DFX_P1_CTRL */ + u32 afe_dfx_p1_control; + /* 0x0218-0x245 AFE_DFX_P1_DRx */ + u32 afe_dfx_p1_data[16]; + /* 0x0258-0x029c */ + u32 reserved_0258_029c[0x12]; + /* 0x02a0-0x02bc AFE_DFX_P1_IRx */ + u32 afe_dfx_p1_instruction[8]; + /* 0x02c0-0x2fc */ + u32 reserved_02c0_02fc[0x10]; + /* 0x0300 AFE_DFX_TX_PMSN_CTRL */ + u32 afe_dfx_tx_pmsn_control; + /* 0x0304 AFE_DFX_RX_PMSN_CTRL */ + u32 afe_dfx_rx_pmsn_control; + u32 reserved_0308; + /* 0x030c AFE_DFX_NOA_CTRL0 */ + u32 afe_dfx_noa_control0; + /* 0x0310 AFE_DFX_NOA_CTRL1 */ + u32 afe_dfx_noa_control1; + /* 0x0314 AFE_DFX_NOA_CTRL2 */ + u32 afe_dfx_noa_control2; + /* 0x0318 AFE_DFX_NOA_CTRL3 */ + u32 afe_dfx_noa_control3; + /* 0x031c AFE_DFX_NOA_CTRL4 */ + u32 afe_dfx_noa_control4; + /* 0x0320 AFE_DFX_NOA_CTRL5 */ + u32 afe_dfx_noa_control5; + /* 0x0324 AFE_DFX_NOA_CTRL6 */ + u32 afe_dfx_noa_control6; + /* 0x0328 AFE_DFX_NOA_CTRL7 */ + u32 afe_dfx_noa_control7; + /* 0x032c-0x07fc */ + u32 reserved_032c_07fc[0x135]; + + /* 0x0800-0x0bfc */ + struct scu_afe_transceiver scu_afe_xcvr[4]; + + /* 0x0c00-0x0ffc */ + u32 reserved_0c00_0ffc[0x0100]; +}; + +struct scu_protocol_engine_group_registers { + u32 table[0xE0]; +}; + + +struct scu_viit_iit { + u32 table[256]; +}; + +/** + * Placeholder for the ZONE Partition Table information ZONING will not be + * included in the 1.1 release. + * + * + */ +struct scu_zone_partition_table { + u32 table[2048]; +}; + +/** + * Placeholder for the CRAM register since I am not sure if we need to + * read/write to these registers as yet. + * + * + */ +struct scu_completion_ram { + u32 ram[128]; +}; + +/** + * Placeholder for the FBRAM registers since I am not sure if we need to + * read/write to these registers as yet. + * + * + */ +struct scu_frame_buffer_ram { + u32 ram[128]; +}; + +#define scu_scratch_ram_SIZE_IN_DWORDS 256 + +/** + * Placeholder for the scratch RAM registers. + * + * + */ +struct scu_scratch_ram { + u32 ram[scu_scratch_ram_SIZE_IN_DWORDS]; +}; + +/** + * Placeholder since I am not yet sure what these registers are here for. + * + * + */ +struct noa_protocol_engine_partition { + u32 reserved[64]; +}; + +/** + * Placeholder since I am not yet sure what these registers are here for. + * + * + */ +struct noa_hub_partition { + u32 reserved[64]; +}; + +/** + * Placeholder since I am not yet sure what these registers are here for. + * + * + */ +struct noa_host_interface_partition { + u32 reserved[64]; +}; + +/** + * struct transport_link_layer_pair - The SCU Hardware pairs up the TL + * registers with the LL registers so we must place them adjcent to make the + * array of registers in the PEG. + * + * + */ +struct transport_link_layer_pair { + struct scu_transport_layer_registers tl; + struct scu_link_layer_registers ll; +}; + +/** + * struct scu_peg_registers - SCU Protocol Engine Memory mapped register space. + * These registers are unique to each protocol engine group. There can be + * at most two PEG for a single SCU part. + * + * + */ +struct scu_peg_registers { + struct transport_link_layer_pair pe[4]; + struct scu_port_task_scheduler_group_registers ptsg; + struct scu_protocol_engine_group_registers peg; + struct scu_sgpio_registers sgpio; + u32 reserved_01500_1BFF[0x1C0]; + struct scu_viit_entry viit[64]; + struct scu_zone_partition_table zpt0; + struct scu_zone_partition_table zpt1; +}; + +/** + * struct scu_registers - SCU regsiters including both PEG registers if we turn + * on that compile option. All of these registers are in the memory mapped + * space returned from BAR1. + * + * + */ +struct scu_registers { + /* 0x0000 - PEG 0 */ + struct scu_peg_registers peg0; + + /* 0x6000 - SDMA and Miscellaneous */ + struct scu_sdma_registers sdma; + struct scu_completion_ram cram; + struct scu_frame_buffer_ram fbram; + u32 reserved_6800_69FF[0x80]; + struct noa_protocol_engine_partition noa_pe; + struct noa_hub_partition noa_hub; + struct noa_host_interface_partition noa_if; + u32 reserved_6d00_7fff[0x4c0]; + + /* 0x8000 - PEG 1 */ + struct scu_peg_registers peg1; + + /* 0xE000 - AFE Registers */ + struct scu_afe_registers afe; + + /* 0xF000 - reserved */ + u32 reserved_f000_211fff[0x80c00]; + + /* 0x212000 - scratch RAM */ + struct scu_scratch_ram scratch_ram; +}; + +#endif /* _SCU_REGISTERS_HEADER_ */ diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c new file mode 100644 index 000000000000..b6e6368c2665 --- /dev/null +++ b/drivers/scsi/isci/remote_device.c @@ -0,0 +1,1501 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include <scsi/sas.h> +#include "isci.h" +#include "port.h" +#include "remote_device.h" +#include "request.h" +#include "remote_node_context.h" +#include "scu_event_codes.h" +#include "task.h" + +/** + * isci_remote_device_not_ready() - This function is called by the ihost when + * the remote device is not ready. We mark the isci device as ready (not + * "ready_for_io") and signal the waiting proccess. + * @isci_host: This parameter specifies the isci host object. + * @isci_device: This parameter specifies the remote device + * + * sci_lock is held on entrance to this function. + */ +static void isci_remote_device_not_ready(struct isci_host *ihost, + struct isci_remote_device *idev, u32 reason) +{ + struct isci_request *ireq; + + dev_dbg(&ihost->pdev->dev, + "%s: isci_device = %p\n", __func__, idev); + + switch (reason) { + case SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED: + set_bit(IDEV_GONE, &idev->flags); + break; + case SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED: + set_bit(IDEV_IO_NCQERROR, &idev->flags); + + /* Kill all outstanding requests for the device. */ + list_for_each_entry(ireq, &idev->reqs_in_process, dev_node) { + + dev_dbg(&ihost->pdev->dev, + "%s: isci_device = %p request = %p\n", + __func__, idev, ireq); + + sci_controller_terminate_request(ihost, + idev, + ireq); + } + /* Fall through into the default case... */ + default: + clear_bit(IDEV_IO_READY, &idev->flags); + break; + } +} + +/** + * isci_remote_device_ready() - This function is called by the ihost when the + * remote device is ready. We mark the isci device as ready and signal the + * waiting proccess. + * @ihost: our valid isci_host + * @idev: remote device + * + */ +static void isci_remote_device_ready(struct isci_host *ihost, struct isci_remote_device *idev) +{ + dev_dbg(&ihost->pdev->dev, + "%s: idev = %p\n", __func__, idev); + + clear_bit(IDEV_IO_NCQERROR, &idev->flags); + set_bit(IDEV_IO_READY, &idev->flags); + if (test_and_clear_bit(IDEV_START_PENDING, &idev->flags)) + wake_up(&ihost->eventq); +} + +/* called once the remote node context is ready to be freed. + * The remote device can now report that its stop operation is complete. none + */ +static void rnc_destruct_done(void *_dev) +{ + struct isci_remote_device *idev = _dev; + + BUG_ON(idev->started_request_count != 0); + sci_change_state(&idev->sm, SCI_DEV_STOPPED); +} + +static enum sci_status sci_remote_device_terminate_requests(struct isci_remote_device *idev) +{ + struct isci_host *ihost = idev->owning_port->owning_controller; + enum sci_status status = SCI_SUCCESS; + u32 i; + + for (i = 0; i < SCI_MAX_IO_REQUESTS; i++) { + struct isci_request *ireq = ihost->reqs[i]; + enum sci_status s; + + if (!test_bit(IREQ_ACTIVE, &ireq->flags) || + ireq->target_device != idev) + continue; + + s = sci_controller_terminate_request(ihost, idev, ireq); + if (s != SCI_SUCCESS) + status = s; + } + + return status; +} + +enum sci_status sci_remote_device_stop(struct isci_remote_device *idev, + u32 timeout) +{ + struct sci_base_state_machine *sm = &idev->sm; + enum sci_remote_device_states state = sm->current_state_id; + + switch (state) { + case SCI_DEV_INITIAL: + case SCI_DEV_FAILED: + case SCI_DEV_FINAL: + default: + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", + __func__, state); + return SCI_FAILURE_INVALID_STATE; + case SCI_DEV_STOPPED: + return SCI_SUCCESS; + case SCI_DEV_STARTING: + /* device not started so there had better be no requests */ + BUG_ON(idev->started_request_count != 0); + sci_remote_node_context_destruct(&idev->rnc, + rnc_destruct_done, idev); + /* Transition to the stopping state and wait for the + * remote node to complete being posted and invalidated. + */ + sci_change_state(sm, SCI_DEV_STOPPING); + return SCI_SUCCESS; + case SCI_DEV_READY: + case SCI_STP_DEV_IDLE: + case SCI_STP_DEV_CMD: + case SCI_STP_DEV_NCQ: + case SCI_STP_DEV_NCQ_ERROR: + case SCI_STP_DEV_AWAIT_RESET: + case SCI_SMP_DEV_IDLE: + case SCI_SMP_DEV_CMD: + sci_change_state(sm, SCI_DEV_STOPPING); + if (idev->started_request_count == 0) { + sci_remote_node_context_destruct(&idev->rnc, + rnc_destruct_done, idev); + return SCI_SUCCESS; + } else + return sci_remote_device_terminate_requests(idev); + break; + case SCI_DEV_STOPPING: + /* All requests should have been terminated, but if there is an + * attempt to stop a device already in the stopping state, then + * try again to terminate. + */ + return sci_remote_device_terminate_requests(idev); + case SCI_DEV_RESETTING: + sci_change_state(sm, SCI_DEV_STOPPING); + return SCI_SUCCESS; + } +} + +enum sci_status sci_remote_device_reset(struct isci_remote_device *idev) +{ + struct sci_base_state_machine *sm = &idev->sm; + enum sci_remote_device_states state = sm->current_state_id; + + switch (state) { + case SCI_DEV_INITIAL: + case SCI_DEV_STOPPED: + case SCI_DEV_STARTING: + case SCI_SMP_DEV_IDLE: + case SCI_SMP_DEV_CMD: + case SCI_DEV_STOPPING: + case SCI_DEV_FAILED: + case SCI_DEV_RESETTING: + case SCI_DEV_FINAL: + default: + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", + __func__, state); + return SCI_FAILURE_INVALID_STATE; + case SCI_DEV_READY: + case SCI_STP_DEV_IDLE: + case SCI_STP_DEV_CMD: + case SCI_STP_DEV_NCQ: + case SCI_STP_DEV_NCQ_ERROR: + case SCI_STP_DEV_AWAIT_RESET: + sci_change_state(sm, SCI_DEV_RESETTING); + return SCI_SUCCESS; + } +} + +enum sci_status sci_remote_device_reset_complete(struct isci_remote_device *idev) +{ + struct sci_base_state_machine *sm = &idev->sm; + enum sci_remote_device_states state = sm->current_state_id; + + if (state != SCI_DEV_RESETTING) { + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", + __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + sci_change_state(sm, SCI_DEV_READY); + return SCI_SUCCESS; +} + +enum sci_status sci_remote_device_suspend(struct isci_remote_device *idev, + u32 suspend_type) +{ + struct sci_base_state_machine *sm = &idev->sm; + enum sci_remote_device_states state = sm->current_state_id; + + if (state != SCI_STP_DEV_CMD) { + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", + __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + return sci_remote_node_context_suspend(&idev->rnc, + suspend_type, NULL, NULL); +} + +enum sci_status sci_remote_device_frame_handler(struct isci_remote_device *idev, + u32 frame_index) +{ + struct sci_base_state_machine *sm = &idev->sm; + enum sci_remote_device_states state = sm->current_state_id; + struct isci_host *ihost = idev->owning_port->owning_controller; + enum sci_status status; + + switch (state) { + case SCI_DEV_INITIAL: + case SCI_DEV_STOPPED: + case SCI_DEV_STARTING: + case SCI_STP_DEV_IDLE: + case SCI_SMP_DEV_IDLE: + case SCI_DEV_FINAL: + default: + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", + __func__, state); + /* Return the frame back to the controller */ + sci_controller_release_frame(ihost, frame_index); + return SCI_FAILURE_INVALID_STATE; + case SCI_DEV_READY: + case SCI_STP_DEV_NCQ_ERROR: + case SCI_STP_DEV_AWAIT_RESET: + case SCI_DEV_STOPPING: + case SCI_DEV_FAILED: + case SCI_DEV_RESETTING: { + struct isci_request *ireq; + struct ssp_frame_hdr hdr; + void *frame_header; + ssize_t word_cnt; + + status = sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + &frame_header); + if (status != SCI_SUCCESS) + return status; + + word_cnt = sizeof(hdr) / sizeof(u32); + sci_swab32_cpy(&hdr, frame_header, word_cnt); + + ireq = sci_request_by_tag(ihost, be16_to_cpu(hdr.tag)); + if (ireq && ireq->target_device == idev) { + /* The IO request is now in charge of releasing the frame */ + status = sci_io_request_frame_handler(ireq, frame_index); + } else { + /* We could not map this tag to a valid IO + * request Just toss the frame and continue + */ + sci_controller_release_frame(ihost, frame_index); + } + break; + } + case SCI_STP_DEV_NCQ: { + struct dev_to_host_fis *hdr; + + status = sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + (void **)&hdr); + if (status != SCI_SUCCESS) + return status; + + if (hdr->fis_type == FIS_SETDEVBITS && + (hdr->status & ATA_ERR)) { + idev->not_ready_reason = SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED; + + /* TODO Check sactive and complete associated IO if any. */ + sci_change_state(sm, SCI_STP_DEV_NCQ_ERROR); + } else if (hdr->fis_type == FIS_REGD2H && + (hdr->status & ATA_ERR)) { + /* + * Some devices return D2H FIS when an NCQ error is detected. + * Treat this like an SDB error FIS ready reason. + */ + idev->not_ready_reason = SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED; + sci_change_state(&idev->sm, SCI_STP_DEV_NCQ_ERROR); + } else + status = SCI_FAILURE; + + sci_controller_release_frame(ihost, frame_index); + break; + } + case SCI_STP_DEV_CMD: + case SCI_SMP_DEV_CMD: + /* The device does not process any UF received from the hardware while + * in this state. All unsolicited frames are forwarded to the io request + * object. + */ + status = sci_io_request_frame_handler(idev->working_request, frame_index); + break; + } + + return status; +} + +static bool is_remote_device_ready(struct isci_remote_device *idev) +{ + + struct sci_base_state_machine *sm = &idev->sm; + enum sci_remote_device_states state = sm->current_state_id; + + switch (state) { + case SCI_DEV_READY: + case SCI_STP_DEV_IDLE: + case SCI_STP_DEV_CMD: + case SCI_STP_DEV_NCQ: + case SCI_STP_DEV_NCQ_ERROR: + case SCI_STP_DEV_AWAIT_RESET: + case SCI_SMP_DEV_IDLE: + case SCI_SMP_DEV_CMD: + return true; + default: + return false; + } +} + +enum sci_status sci_remote_device_event_handler(struct isci_remote_device *idev, + u32 event_code) +{ + struct sci_base_state_machine *sm = &idev->sm; + enum sci_remote_device_states state = sm->current_state_id; + enum sci_status status; + + switch (scu_get_event_type(event_code)) { + case SCU_EVENT_TYPE_RNC_OPS_MISC: + case SCU_EVENT_TYPE_RNC_SUSPEND_TX: + case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: + status = sci_remote_node_context_event_handler(&idev->rnc, event_code); + break; + case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT: + if (scu_get_event_code(event_code) == SCU_EVENT_IT_NEXUS_TIMEOUT) { + status = SCI_SUCCESS; + + /* Suspend the associated RNC */ + sci_remote_node_context_suspend(&idev->rnc, + SCI_SOFTWARE_SUSPENSION, + NULL, NULL); + + dev_dbg(scirdev_to_dev(idev), + "%s: device: %p event code: %x: %s\n", + __func__, idev, event_code, + is_remote_device_ready(idev) + ? "I_T_Nexus_Timeout event" + : "I_T_Nexus_Timeout event in wrong state"); + + break; + } + /* Else, fall through and treat as unhandled... */ + default: + dev_dbg(scirdev_to_dev(idev), + "%s: device: %p event code: %x: %s\n", + __func__, idev, event_code, + is_remote_device_ready(idev) + ? "unexpected event" + : "unexpected event in wrong state"); + status = SCI_FAILURE_INVALID_STATE; + break; + } + + if (status != SCI_SUCCESS) + return status; + + if (state == SCI_STP_DEV_IDLE) { + + /* We pick up suspension events to handle specifically to this + * state. We resume the RNC right away. + */ + if (scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX || + scu_get_event_type(event_code) == SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX) + status = sci_remote_node_context_resume(&idev->rnc, NULL, NULL); + } + + return status; +} + +static void sci_remote_device_start_request(struct isci_remote_device *idev, + struct isci_request *ireq, + enum sci_status status) +{ + struct isci_port *iport = idev->owning_port; + + /* cleanup requests that failed after starting on the port */ + if (status != SCI_SUCCESS) + sci_port_complete_io(iport, idev, ireq); + else { + kref_get(&idev->kref); + idev->started_request_count++; + } +} + +enum sci_status sci_remote_device_start_io(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq) +{ + struct sci_base_state_machine *sm = &idev->sm; + enum sci_remote_device_states state = sm->current_state_id; + struct isci_port *iport = idev->owning_port; + enum sci_status status; + + switch (state) { + case SCI_DEV_INITIAL: + case SCI_DEV_STOPPED: + case SCI_DEV_STARTING: + case SCI_STP_DEV_NCQ_ERROR: + case SCI_DEV_STOPPING: + case SCI_DEV_FAILED: + case SCI_DEV_RESETTING: + case SCI_DEV_FINAL: + default: + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", + __func__, state); + return SCI_FAILURE_INVALID_STATE; + case SCI_DEV_READY: + /* attempt to start an io request for this device object. The remote + * device object will issue the start request for the io and if + * successful it will start the request for the port object then + * increment its own request count. + */ + status = sci_port_start_io(iport, idev, ireq); + if (status != SCI_SUCCESS) + return status; + + status = sci_remote_node_context_start_io(&idev->rnc, ireq); + if (status != SCI_SUCCESS) + break; + + status = sci_request_start(ireq); + break; + case SCI_STP_DEV_IDLE: { + /* handle the start io operation for a sata device that is in + * the command idle state. - Evalute the type of IO request to + * be started - If its an NCQ request change to NCQ substate - + * If its any other command change to the CMD substate + * + * If this is a softreset we may want to have a different + * substate. + */ + enum sci_remote_device_states new_state; + struct sas_task *task = isci_request_access_task(ireq); + + status = sci_port_start_io(iport, idev, ireq); + if (status != SCI_SUCCESS) + return status; + + status = sci_remote_node_context_start_io(&idev->rnc, ireq); + if (status != SCI_SUCCESS) + break; + + status = sci_request_start(ireq); + if (status != SCI_SUCCESS) + break; + + if (task->ata_task.use_ncq) + new_state = SCI_STP_DEV_NCQ; + else { + idev->working_request = ireq; + new_state = SCI_STP_DEV_CMD; + } + sci_change_state(sm, new_state); + break; + } + case SCI_STP_DEV_NCQ: { + struct sas_task *task = isci_request_access_task(ireq); + + if (task->ata_task.use_ncq) { + status = sci_port_start_io(iport, idev, ireq); + if (status != SCI_SUCCESS) + return status; + + status = sci_remote_node_context_start_io(&idev->rnc, ireq); + if (status != SCI_SUCCESS) + break; + + status = sci_request_start(ireq); + } else + return SCI_FAILURE_INVALID_STATE; + break; + } + case SCI_STP_DEV_AWAIT_RESET: + return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; + case SCI_SMP_DEV_IDLE: + status = sci_port_start_io(iport, idev, ireq); + if (status != SCI_SUCCESS) + return status; + + status = sci_remote_node_context_start_io(&idev->rnc, ireq); + if (status != SCI_SUCCESS) + break; + + status = sci_request_start(ireq); + if (status != SCI_SUCCESS) + break; + + idev->working_request = ireq; + sci_change_state(&idev->sm, SCI_SMP_DEV_CMD); + break; + case SCI_STP_DEV_CMD: + case SCI_SMP_DEV_CMD: + /* device is already handling a command it can not accept new commands + * until this one is complete. + */ + return SCI_FAILURE_INVALID_STATE; + } + + sci_remote_device_start_request(idev, ireq, status); + return status; +} + +static enum sci_status common_complete_io(struct isci_port *iport, + struct isci_remote_device *idev, + struct isci_request *ireq) +{ + enum sci_status status; + + status = sci_request_complete(ireq); + if (status != SCI_SUCCESS) + return status; + + status = sci_port_complete_io(iport, idev, ireq); + if (status != SCI_SUCCESS) + return status; + + sci_remote_device_decrement_request_count(idev); + return status; +} + +enum sci_status sci_remote_device_complete_io(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq) +{ + struct sci_base_state_machine *sm = &idev->sm; + enum sci_remote_device_states state = sm->current_state_id; + struct isci_port *iport = idev->owning_port; + enum sci_status status; + + switch (state) { + case SCI_DEV_INITIAL: + case SCI_DEV_STOPPED: + case SCI_DEV_STARTING: + case SCI_STP_DEV_IDLE: + case SCI_SMP_DEV_IDLE: + case SCI_DEV_FAILED: + case SCI_DEV_FINAL: + default: + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", + __func__, state); + return SCI_FAILURE_INVALID_STATE; + case SCI_DEV_READY: + case SCI_STP_DEV_AWAIT_RESET: + case SCI_DEV_RESETTING: + status = common_complete_io(iport, idev, ireq); + break; + case SCI_STP_DEV_CMD: + case SCI_STP_DEV_NCQ: + case SCI_STP_DEV_NCQ_ERROR: + status = common_complete_io(iport, idev, ireq); + if (status != SCI_SUCCESS) + break; + + if (ireq->sci_status == SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { + /* This request causes hardware error, device needs to be Lun Reset. + * So here we force the state machine to IDLE state so the rest IOs + * can reach RNC state handler, these IOs will be completed by RNC with + * status of "DEVICE_RESET_REQUIRED", instead of "INVALID STATE". + */ + sci_change_state(sm, SCI_STP_DEV_AWAIT_RESET); + } else if (idev->started_request_count == 0) + sci_change_state(sm, SCI_STP_DEV_IDLE); + break; + case SCI_SMP_DEV_CMD: + status = common_complete_io(iport, idev, ireq); + if (status != SCI_SUCCESS) + break; + sci_change_state(sm, SCI_SMP_DEV_IDLE); + break; + case SCI_DEV_STOPPING: + status = common_complete_io(iport, idev, ireq); + if (status != SCI_SUCCESS) + break; + + if (idev->started_request_count == 0) + sci_remote_node_context_destruct(&idev->rnc, + rnc_destruct_done, + idev); + break; + } + + if (status != SCI_SUCCESS) + dev_err(scirdev_to_dev(idev), + "%s: Port:0x%p Device:0x%p Request:0x%p Status:0x%x " + "could not complete\n", __func__, iport, + idev, ireq, status); + else + isci_put_device(idev); + + return status; +} + +static void sci_remote_device_continue_request(void *dev) +{ + struct isci_remote_device *idev = dev; + + /* we need to check if this request is still valid to continue. */ + if (idev->working_request) + sci_controller_continue_io(idev->working_request); +} + +enum sci_status sci_remote_device_start_task(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq) +{ + struct sci_base_state_machine *sm = &idev->sm; + enum sci_remote_device_states state = sm->current_state_id; + struct isci_port *iport = idev->owning_port; + enum sci_status status; + + switch (state) { + case SCI_DEV_INITIAL: + case SCI_DEV_STOPPED: + case SCI_DEV_STARTING: + case SCI_SMP_DEV_IDLE: + case SCI_SMP_DEV_CMD: + case SCI_DEV_STOPPING: + case SCI_DEV_FAILED: + case SCI_DEV_RESETTING: + case SCI_DEV_FINAL: + default: + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", + __func__, state); + return SCI_FAILURE_INVALID_STATE; + case SCI_STP_DEV_IDLE: + case SCI_STP_DEV_CMD: + case SCI_STP_DEV_NCQ: + case SCI_STP_DEV_NCQ_ERROR: + case SCI_STP_DEV_AWAIT_RESET: + status = sci_port_start_io(iport, idev, ireq); + if (status != SCI_SUCCESS) + return status; + + status = sci_remote_node_context_start_task(&idev->rnc, ireq); + if (status != SCI_SUCCESS) + goto out; + + status = sci_request_start(ireq); + if (status != SCI_SUCCESS) + goto out; + + /* Note: If the remote device state is not IDLE this will + * replace the request that probably resulted in the task + * management request. + */ + idev->working_request = ireq; + sci_change_state(sm, SCI_STP_DEV_CMD); + + /* The remote node context must cleanup the TCi to NCQ mapping + * table. The only way to do this correctly is to either write + * to the TLCR register or to invalidate and repost the RNC. In + * either case the remote node context state machine will take + * the correct action when the remote node context is suspended + * and later resumed. + */ + sci_remote_node_context_suspend(&idev->rnc, + SCI_SOFTWARE_SUSPENSION, NULL, NULL); + sci_remote_node_context_resume(&idev->rnc, + sci_remote_device_continue_request, + idev); + + out: + sci_remote_device_start_request(idev, ireq, status); + /* We need to let the controller start request handler know that + * it can't post TC yet. We will provide a callback function to + * post TC when RNC gets resumed. + */ + return SCI_FAILURE_RESET_DEVICE_PARTIAL_SUCCESS; + case SCI_DEV_READY: + status = sci_port_start_io(iport, idev, ireq); + if (status != SCI_SUCCESS) + return status; + + status = sci_remote_node_context_start_task(&idev->rnc, ireq); + if (status != SCI_SUCCESS) + break; + + status = sci_request_start(ireq); + break; + } + sci_remote_device_start_request(idev, ireq, status); + + return status; +} + +void sci_remote_device_post_request(struct isci_remote_device *idev, u32 request) +{ + struct isci_port *iport = idev->owning_port; + u32 context; + + context = request | + (ISCI_PEG << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (iport->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | + idev->rnc.remote_node_index; + + sci_controller_post_request(iport->owning_controller, context); +} + +/* called once the remote node context has transisitioned to a + * ready state. This is the indication that the remote device object can also + * transition to ready. + */ +static void remote_device_resume_done(void *_dev) +{ + struct isci_remote_device *idev = _dev; + + if (is_remote_device_ready(idev)) + return; + + /* go 'ready' if we are not already in a ready state */ + sci_change_state(&idev->sm, SCI_DEV_READY); +} + +static void sci_stp_remote_device_ready_idle_substate_resume_complete_handler(void *_dev) +{ + struct isci_remote_device *idev = _dev; + struct isci_host *ihost = idev->owning_port->owning_controller; + + /* For NCQ operation we do not issue a isci_remote_device_not_ready(). + * As a result, avoid sending the ready notification. + */ + if (idev->sm.previous_state_id != SCI_STP_DEV_NCQ) + isci_remote_device_ready(ihost, idev); +} + +static void sci_remote_device_initial_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + + /* Initial state is a transitional state to the stopped state */ + sci_change_state(&idev->sm, SCI_DEV_STOPPED); +} + +/** + * sci_remote_device_destruct() - free remote node context and destruct + * @remote_device: This parameter specifies the remote device to be destructed. + * + * Remote device objects are a limited resource. As such, they must be + * protected. Thus calls to construct and destruct are mutually exclusive and + * non-reentrant. The return value shall indicate if the device was + * successfully destructed or if some failure occurred. enum sci_status This value + * is returned if the device is successfully destructed. + * SCI_FAILURE_INVALID_REMOTE_DEVICE This value is returned if the supplied + * device isn't valid (e.g. it's already been destoryed, the handle isn't + * valid, etc.). + */ +static enum sci_status sci_remote_device_destruct(struct isci_remote_device *idev) +{ + struct sci_base_state_machine *sm = &idev->sm; + enum sci_remote_device_states state = sm->current_state_id; + struct isci_host *ihost; + + if (state != SCI_DEV_STOPPED) { + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", + __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + ihost = idev->owning_port->owning_controller; + sci_controller_free_remote_node_context(ihost, idev, + idev->rnc.remote_node_index); + idev->rnc.remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; + sci_change_state(sm, SCI_DEV_FINAL); + + return SCI_SUCCESS; +} + +/** + * isci_remote_device_deconstruct() - This function frees an isci_remote_device. + * @ihost: This parameter specifies the isci host object. + * @idev: This parameter specifies the remote device to be freed. + * + */ +static void isci_remote_device_deconstruct(struct isci_host *ihost, struct isci_remote_device *idev) +{ + dev_dbg(&ihost->pdev->dev, + "%s: isci_device = %p\n", __func__, idev); + + /* There should not be any outstanding io's. All paths to + * here should go through isci_remote_device_nuke_requests. + * If we hit this condition, we will need a way to complete + * io requests in process */ + BUG_ON(!list_empty(&idev->reqs_in_process)); + + sci_remote_device_destruct(idev); + list_del_init(&idev->node); + isci_put_device(idev); +} + +static void sci_remote_device_stopped_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + struct isci_host *ihost = idev->owning_port->owning_controller; + u32 prev_state; + + /* If we are entering from the stopping state let the SCI User know that + * the stop operation has completed. + */ + prev_state = idev->sm.previous_state_id; + if (prev_state == SCI_DEV_STOPPING) + isci_remote_device_deconstruct(ihost, idev); + + sci_controller_remote_device_stopped(ihost, idev); +} + +static void sci_remote_device_starting_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + struct isci_host *ihost = idev->owning_port->owning_controller; + + isci_remote_device_not_ready(ihost, idev, + SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED); +} + +static void sci_remote_device_ready_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + struct isci_host *ihost = idev->owning_port->owning_controller; + struct domain_device *dev = idev->domain_dev; + + if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_SATA)) { + sci_change_state(&idev->sm, SCI_STP_DEV_IDLE); + } else if (dev_is_expander(dev)) { + sci_change_state(&idev->sm, SCI_SMP_DEV_IDLE); + } else + isci_remote_device_ready(ihost, idev); +} + +static void sci_remote_device_ready_state_exit(struct sci_base_state_machine *sm) +{ + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + struct domain_device *dev = idev->domain_dev; + + if (dev->dev_type == SAS_END_DEV) { + struct isci_host *ihost = idev->owning_port->owning_controller; + + isci_remote_device_not_ready(ihost, idev, + SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED); + } +} + +static void sci_remote_device_resetting_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + + sci_remote_node_context_suspend( + &idev->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); +} + +static void sci_remote_device_resetting_state_exit(struct sci_base_state_machine *sm) +{ + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + + sci_remote_node_context_resume(&idev->rnc, NULL, NULL); +} + +static void sci_stp_remote_device_ready_idle_substate_enter(struct sci_base_state_machine *sm) +{ + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + + idev->working_request = NULL; + if (sci_remote_node_context_is_ready(&idev->rnc)) { + /* + * Since the RNC is ready, it's alright to finish completion + * processing (e.g. signal the remote device is ready). */ + sci_stp_remote_device_ready_idle_substate_resume_complete_handler(idev); + } else { + sci_remote_node_context_resume(&idev->rnc, + sci_stp_remote_device_ready_idle_substate_resume_complete_handler, + idev); + } +} + +static void sci_stp_remote_device_ready_cmd_substate_enter(struct sci_base_state_machine *sm) +{ + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + struct isci_host *ihost = idev->owning_port->owning_controller; + + BUG_ON(idev->working_request == NULL); + + isci_remote_device_not_ready(ihost, idev, + SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED); +} + +static void sci_stp_remote_device_ready_ncq_error_substate_enter(struct sci_base_state_machine *sm) +{ + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + struct isci_host *ihost = idev->owning_port->owning_controller; + + if (idev->not_ready_reason == SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED) + isci_remote_device_not_ready(ihost, idev, + idev->not_ready_reason); +} + +static void sci_smp_remote_device_ready_idle_substate_enter(struct sci_base_state_machine *sm) +{ + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + struct isci_host *ihost = idev->owning_port->owning_controller; + + isci_remote_device_ready(ihost, idev); +} + +static void sci_smp_remote_device_ready_cmd_substate_enter(struct sci_base_state_machine *sm) +{ + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + struct isci_host *ihost = idev->owning_port->owning_controller; + + BUG_ON(idev->working_request == NULL); + + isci_remote_device_not_ready(ihost, idev, + SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED); +} + +static void sci_smp_remote_device_ready_cmd_substate_exit(struct sci_base_state_machine *sm) +{ + struct isci_remote_device *idev = container_of(sm, typeof(*idev), sm); + + idev->working_request = NULL; +} + +static const struct sci_base_state sci_remote_device_state_table[] = { + [SCI_DEV_INITIAL] = { + .enter_state = sci_remote_device_initial_state_enter, + }, + [SCI_DEV_STOPPED] = { + .enter_state = sci_remote_device_stopped_state_enter, + }, + [SCI_DEV_STARTING] = { + .enter_state = sci_remote_device_starting_state_enter, + }, + [SCI_DEV_READY] = { + .enter_state = sci_remote_device_ready_state_enter, + .exit_state = sci_remote_device_ready_state_exit + }, + [SCI_STP_DEV_IDLE] = { + .enter_state = sci_stp_remote_device_ready_idle_substate_enter, + }, + [SCI_STP_DEV_CMD] = { + .enter_state = sci_stp_remote_device_ready_cmd_substate_enter, + }, + [SCI_STP_DEV_NCQ] = { }, + [SCI_STP_DEV_NCQ_ERROR] = { + .enter_state = sci_stp_remote_device_ready_ncq_error_substate_enter, + }, + [SCI_STP_DEV_AWAIT_RESET] = { }, + [SCI_SMP_DEV_IDLE] = { + .enter_state = sci_smp_remote_device_ready_idle_substate_enter, + }, + [SCI_SMP_DEV_CMD] = { + .enter_state = sci_smp_remote_device_ready_cmd_substate_enter, + .exit_state = sci_smp_remote_device_ready_cmd_substate_exit, + }, + [SCI_DEV_STOPPING] = { }, + [SCI_DEV_FAILED] = { }, + [SCI_DEV_RESETTING] = { + .enter_state = sci_remote_device_resetting_state_enter, + .exit_state = sci_remote_device_resetting_state_exit + }, + [SCI_DEV_FINAL] = { }, +}; + +/** + * sci_remote_device_construct() - common construction + * @sci_port: SAS/SATA port through which this device is accessed. + * @sci_dev: remote device to construct + * + * This routine just performs benign initialization and does not + * allocate the remote_node_context which is left to + * sci_remote_device_[de]a_construct(). sci_remote_device_destruct() + * frees the remote_node_context(s) for the device. + */ +static void sci_remote_device_construct(struct isci_port *iport, + struct isci_remote_device *idev) +{ + idev->owning_port = iport; + idev->started_request_count = 0; + + sci_init_sm(&idev->sm, sci_remote_device_state_table, SCI_DEV_INITIAL); + + sci_remote_node_context_construct(&idev->rnc, + SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); +} + +/** + * sci_remote_device_da_construct() - construct direct attached device. + * + * The information (e.g. IAF, Signature FIS, etc.) necessary to build + * the device is known to the SCI Core since it is contained in the + * sci_phy object. Remote node context(s) is/are a global resource + * allocated by this routine, freed by sci_remote_device_destruct(). + * + * Returns: + * SCI_FAILURE_DEVICE_EXISTS - device has already been constructed. + * SCI_FAILURE_UNSUPPORTED_PROTOCOL - e.g. sas device attached to + * sata-only controller instance. + * SCI_FAILURE_INSUFFICIENT_RESOURCES - remote node contexts exhausted. + */ +static enum sci_status sci_remote_device_da_construct(struct isci_port *iport, + struct isci_remote_device *idev) +{ + enum sci_status status; + struct domain_device *dev = idev->domain_dev; + + sci_remote_device_construct(iport, idev); + + /* + * This information is request to determine how many remote node context + * entries will be needed to store the remote node. + */ + idev->is_direct_attached = true; + status = sci_controller_allocate_remote_node_context(iport->owning_controller, + idev, + &idev->rnc.remote_node_index); + + if (status != SCI_SUCCESS) + return status; + + if (dev->dev_type == SAS_END_DEV || dev->dev_type == SATA_DEV || + (dev->tproto & SAS_PROTOCOL_STP) || dev_is_expander(dev)) + /* pass */; + else + return SCI_FAILURE_UNSUPPORTED_PROTOCOL; + + idev->connection_rate = sci_port_get_max_allowed_speed(iport); + + /* / @todo Should I assign the port width by reading all of the phys on the port? */ + idev->device_port_width = 1; + + return SCI_SUCCESS; +} + +/** + * sci_remote_device_ea_construct() - construct expander attached device + * + * Remote node context(s) is/are a global resource allocated by this + * routine, freed by sci_remote_device_destruct(). + * + * Returns: + * SCI_FAILURE_DEVICE_EXISTS - device has already been constructed. + * SCI_FAILURE_UNSUPPORTED_PROTOCOL - e.g. sas device attached to + * sata-only controller instance. + * SCI_FAILURE_INSUFFICIENT_RESOURCES - remote node contexts exhausted. + */ +static enum sci_status sci_remote_device_ea_construct(struct isci_port *iport, + struct isci_remote_device *idev) +{ + struct domain_device *dev = idev->domain_dev; + enum sci_status status; + + sci_remote_device_construct(iport, idev); + + status = sci_controller_allocate_remote_node_context(iport->owning_controller, + idev, + &idev->rnc.remote_node_index); + if (status != SCI_SUCCESS) + return status; + + if (dev->dev_type == SAS_END_DEV || dev->dev_type == SATA_DEV || + (dev->tproto & SAS_PROTOCOL_STP) || dev_is_expander(dev)) + /* pass */; + else + return SCI_FAILURE_UNSUPPORTED_PROTOCOL; + + /* + * For SAS-2 the physical link rate is actually a logical link + * rate that incorporates multiplexing. The SCU doesn't + * incorporate multiplexing and for the purposes of the + * connection the logical link rate is that same as the + * physical. Furthermore, the SAS-2 and SAS-1.1 fields overlay + * one another, so this code works for both situations. */ + idev->connection_rate = min_t(u16, sci_port_get_max_allowed_speed(iport), + dev->linkrate); + + /* / @todo Should I assign the port width by reading all of the phys on the port? */ + idev->device_port_width = 1; + + return SCI_SUCCESS; +} + +/** + * sci_remote_device_start() - This method will start the supplied remote + * device. This method enables normal IO requests to flow through to the + * remote device. + * @remote_device: This parameter specifies the device to be started. + * @timeout: This parameter specifies the number of milliseconds in which the + * start operation should complete. + * + * An indication of whether the device was successfully started. SCI_SUCCESS + * This value is returned if the device was successfully started. + * SCI_FAILURE_INVALID_PHY This value is returned if the user attempts to start + * the device when there have been no phys added to it. + */ +static enum sci_status sci_remote_device_start(struct isci_remote_device *idev, + u32 timeout) +{ + struct sci_base_state_machine *sm = &idev->sm; + enum sci_remote_device_states state = sm->current_state_id; + enum sci_status status; + + if (state != SCI_DEV_STOPPED) { + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", + __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + status = sci_remote_node_context_resume(&idev->rnc, + remote_device_resume_done, + idev); + if (status != SCI_SUCCESS) + return status; + + sci_change_state(sm, SCI_DEV_STARTING); + + return SCI_SUCCESS; +} + +static enum sci_status isci_remote_device_construct(struct isci_port *iport, + struct isci_remote_device *idev) +{ + struct isci_host *ihost = iport->isci_host; + struct domain_device *dev = idev->domain_dev; + enum sci_status status; + + if (dev->parent && dev_is_expander(dev->parent)) + status = sci_remote_device_ea_construct(iport, idev); + else + status = sci_remote_device_da_construct(iport, idev); + + if (status != SCI_SUCCESS) { + dev_dbg(&ihost->pdev->dev, "%s: construct failed: %d\n", + __func__, status); + + return status; + } + + /* start the device. */ + status = sci_remote_device_start(idev, ISCI_REMOTE_DEVICE_START_TIMEOUT); + + if (status != SCI_SUCCESS) + dev_warn(&ihost->pdev->dev, "remote device start failed: %d\n", + status); + + return status; +} + +void isci_remote_device_nuke_requests(struct isci_host *ihost, struct isci_remote_device *idev) +{ + DECLARE_COMPLETION_ONSTACK(aborted_task_completion); + + dev_dbg(&ihost->pdev->dev, + "%s: idev = %p\n", __func__, idev); + + /* Cleanup all requests pending for this device. */ + isci_terminate_pending_requests(ihost, idev); + + dev_dbg(&ihost->pdev->dev, + "%s: idev = %p, done\n", __func__, idev); +} + +/** + * This function builds the isci_remote_device when a libsas dev_found message + * is received. + * @isci_host: This parameter specifies the isci host object. + * @port: This parameter specifies the isci_port conected to this device. + * + * pointer to new isci_remote_device. + */ +static struct isci_remote_device * +isci_remote_device_alloc(struct isci_host *ihost, struct isci_port *iport) +{ + struct isci_remote_device *idev; + int i; + + for (i = 0; i < SCI_MAX_REMOTE_DEVICES; i++) { + idev = &ihost->devices[i]; + if (!test_and_set_bit(IDEV_ALLOCATED, &idev->flags)) + break; + } + + if (i >= SCI_MAX_REMOTE_DEVICES) { + dev_warn(&ihost->pdev->dev, "%s: failed\n", __func__); + return NULL; + } + + if (WARN_ONCE(!list_empty(&idev->reqs_in_process), "found requests in process\n")) + return NULL; + + if (WARN_ONCE(!list_empty(&idev->node), "found non-idle remote device\n")) + return NULL; + + return idev; +} + +void isci_remote_device_release(struct kref *kref) +{ + struct isci_remote_device *idev = container_of(kref, typeof(*idev), kref); + struct isci_host *ihost = idev->isci_port->isci_host; + + idev->domain_dev = NULL; + idev->isci_port = NULL; + clear_bit(IDEV_START_PENDING, &idev->flags); + clear_bit(IDEV_STOP_PENDING, &idev->flags); + clear_bit(IDEV_IO_READY, &idev->flags); + clear_bit(IDEV_GONE, &idev->flags); + clear_bit(IDEV_EH, &idev->flags); + smp_mb__before_clear_bit(); + clear_bit(IDEV_ALLOCATED, &idev->flags); + wake_up(&ihost->eventq); +} + +/** + * isci_remote_device_stop() - This function is called internally to stop the + * remote device. + * @isci_host: This parameter specifies the isci host object. + * @isci_device: This parameter specifies the remote device. + * + * The status of the ihost request to stop. + */ +enum sci_status isci_remote_device_stop(struct isci_host *ihost, struct isci_remote_device *idev) +{ + enum sci_status status; + unsigned long flags; + + dev_dbg(&ihost->pdev->dev, + "%s: isci_device = %p\n", __func__, idev); + + spin_lock_irqsave(&ihost->scic_lock, flags); + idev->domain_dev->lldd_dev = NULL; /* disable new lookups */ + set_bit(IDEV_GONE, &idev->flags); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + /* Kill all outstanding requests. */ + isci_remote_device_nuke_requests(ihost, idev); + + set_bit(IDEV_STOP_PENDING, &idev->flags); + + spin_lock_irqsave(&ihost->scic_lock, flags); + status = sci_remote_device_stop(idev, 50); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + /* Wait for the stop complete callback. */ + if (WARN_ONCE(status != SCI_SUCCESS, "failed to stop device\n")) + /* nothing to wait for */; + else + wait_for_device_stop(ihost, idev); + + return status; +} + +/** + * isci_remote_device_gone() - This function is called by libsas when a domain + * device is removed. + * @domain_device: This parameter specifies the libsas domain device. + * + */ +void isci_remote_device_gone(struct domain_device *dev) +{ + struct isci_host *ihost = dev_to_ihost(dev); + struct isci_remote_device *idev = dev->lldd_dev; + + dev_dbg(&ihost->pdev->dev, + "%s: domain_device = %p, isci_device = %p, isci_port = %p\n", + __func__, dev, idev, idev->isci_port); + + isci_remote_device_stop(ihost, idev); +} + + +/** + * isci_remote_device_found() - This function is called by libsas when a remote + * device is discovered. A remote device object is created and started. the + * function then sleeps until the sci core device started message is + * received. + * @domain_device: This parameter specifies the libsas domain device. + * + * status, zero indicates success. + */ +int isci_remote_device_found(struct domain_device *domain_dev) +{ + struct isci_host *isci_host = dev_to_ihost(domain_dev); + struct isci_port *isci_port; + struct isci_phy *isci_phy; + struct asd_sas_port *sas_port; + struct asd_sas_phy *sas_phy; + struct isci_remote_device *isci_device; + enum sci_status status; + + dev_dbg(&isci_host->pdev->dev, + "%s: domain_device = %p\n", __func__, domain_dev); + + wait_for_start(isci_host); + + sas_port = domain_dev->port; + sas_phy = list_first_entry(&sas_port->phy_list, struct asd_sas_phy, + port_phy_el); + isci_phy = to_iphy(sas_phy); + isci_port = isci_phy->isci_port; + + /* we are being called for a device on this port, + * so it has to come up eventually + */ + wait_for_completion(&isci_port->start_complete); + + if ((isci_stopping == isci_port_get_state(isci_port)) || + (isci_stopped == isci_port_get_state(isci_port))) + return -ENODEV; + + isci_device = isci_remote_device_alloc(isci_host, isci_port); + if (!isci_device) + return -ENODEV; + + kref_init(&isci_device->kref); + INIT_LIST_HEAD(&isci_device->node); + + spin_lock_irq(&isci_host->scic_lock); + isci_device->domain_dev = domain_dev; + isci_device->isci_port = isci_port; + list_add_tail(&isci_device->node, &isci_port->remote_dev_list); + + set_bit(IDEV_START_PENDING, &isci_device->flags); + status = isci_remote_device_construct(isci_port, isci_device); + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device = %p\n", + __func__, isci_device); + + if (status == SCI_SUCCESS) { + /* device came up, advertise it to the world */ + domain_dev->lldd_dev = isci_device; + } else + isci_put_device(isci_device); + spin_unlock_irq(&isci_host->scic_lock); + + /* wait for the device ready callback. */ + wait_for_device_start(isci_host, isci_device); + + return status == SCI_SUCCESS ? 0 : -ENODEV; +} +/** + * isci_device_is_reset_pending() - This function will check if there is any + * pending reset condition on the device. + * @request: This parameter is the isci_device object. + * + * true if there is a reset pending for the device. + */ +bool isci_device_is_reset_pending( + struct isci_host *isci_host, + struct isci_remote_device *isci_device) +{ + struct isci_request *isci_request; + struct isci_request *tmp_req; + bool reset_is_pending = false; + unsigned long flags; + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device = %p\n", __func__, isci_device); + + spin_lock_irqsave(&isci_host->scic_lock, flags); + + /* Check for reset on all pending requests. */ + list_for_each_entry_safe(isci_request, tmp_req, + &isci_device->reqs_in_process, dev_node) { + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device = %p request = %p\n", + __func__, isci_device, isci_request); + + if (isci_request->ttype == io_task) { + struct sas_task *task = isci_request_access_task( + isci_request); + + spin_lock(&task->task_state_lock); + if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET) + reset_is_pending = true; + spin_unlock(&task->task_state_lock); + } + } + + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device = %p reset_is_pending = %d\n", + __func__, isci_device, reset_is_pending); + + return reset_is_pending; +} + +/** + * isci_device_clear_reset_pending() - This function will clear if any pending + * reset condition flags on the device. + * @request: This parameter is the isci_device object. + * + * true if there is a reset pending for the device. + */ +void isci_device_clear_reset_pending(struct isci_host *ihost, struct isci_remote_device *idev) +{ + struct isci_request *isci_request; + struct isci_request *tmp_req; + unsigned long flags = 0; + + dev_dbg(&ihost->pdev->dev, "%s: idev=%p, ihost=%p\n", + __func__, idev, ihost); + + spin_lock_irqsave(&ihost->scic_lock, flags); + + /* Clear reset pending on all pending requests. */ + list_for_each_entry_safe(isci_request, tmp_req, + &idev->reqs_in_process, dev_node) { + dev_dbg(&ihost->pdev->dev, "%s: idev = %p request = %p\n", + __func__, idev, isci_request); + + if (isci_request->ttype == io_task) { + + unsigned long flags2; + struct sas_task *task = isci_request_access_task( + isci_request); + + spin_lock_irqsave(&task->task_state_lock, flags2); + task->task_state_flags &= ~SAS_TASK_NEED_DEV_RESET; + spin_unlock_irqrestore(&task->task_state_lock, flags2); + } + } + spin_unlock_irqrestore(&ihost->scic_lock, flags); +} diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h new file mode 100644 index 000000000000..57ccfc3d6ad3 --- /dev/null +++ b/drivers/scsi/isci/remote_device.h @@ -0,0 +1,352 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _ISCI_REMOTE_DEVICE_H_ +#define _ISCI_REMOTE_DEVICE_H_ +#include <scsi/libsas.h> +#include <linux/kref.h> +#include "scu_remote_node_context.h" +#include "remote_node_context.h" +#include "port.h" + +enum sci_remote_device_not_ready_reason_code { + SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED, + SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED, + SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED, + SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED, + SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED, + SCIC_REMOTE_DEVICE_NOT_READY_REASON_CODE_MAX +}; + +/** + * isci_remote_device - isci representation of a sas expander / end point + * @device_port_width: hw setting for number of simultaneous connections + * @connection_rate: per-taskcontext connection rate for this device + * @working_request: SATA requests have no tag we for unaccelerated + * protocols we need a method to associate unsolicited + * frames with a pending request + */ +struct isci_remote_device { + #define IDEV_START_PENDING 0 + #define IDEV_STOP_PENDING 1 + #define IDEV_ALLOCATED 2 + #define IDEV_EH 3 + #define IDEV_GONE 4 + #define IDEV_IO_READY 5 + #define IDEV_IO_NCQERROR 6 + unsigned long flags; + struct kref kref; + struct isci_port *isci_port; + struct domain_device *domain_dev; + struct list_head node; + struct list_head reqs_in_process; + struct sci_base_state_machine sm; + u32 device_port_width; + enum sas_linkrate connection_rate; + bool is_direct_attached; + struct isci_port *owning_port; + struct sci_remote_node_context rnc; + /* XXX unify with device reference counting and delete */ + u32 started_request_count; + struct isci_request *working_request; + u32 not_ready_reason; +}; + +#define ISCI_REMOTE_DEVICE_START_TIMEOUT 5000 + +/* device reference routines must be called under sci_lock */ +static inline struct isci_remote_device *isci_lookup_device(struct domain_device *dev) +{ + struct isci_remote_device *idev = dev->lldd_dev; + + if (idev && !test_bit(IDEV_GONE, &idev->flags)) { + kref_get(&idev->kref); + return idev; + } + + return NULL; +} + +void isci_remote_device_release(struct kref *kref); +static inline void isci_put_device(struct isci_remote_device *idev) +{ + if (idev) + kref_put(&idev->kref, isci_remote_device_release); +} + +enum sci_status isci_remote_device_stop(struct isci_host *ihost, + struct isci_remote_device *idev); +void isci_remote_device_nuke_requests(struct isci_host *ihost, + struct isci_remote_device *idev); +void isci_remote_device_gone(struct domain_device *domain_dev); +int isci_remote_device_found(struct domain_device *domain_dev); +bool isci_device_is_reset_pending(struct isci_host *ihost, + struct isci_remote_device *idev); +void isci_device_clear_reset_pending(struct isci_host *ihost, + struct isci_remote_device *idev); +/** + * sci_remote_device_stop() - This method will stop both transmission and + * reception of link activity for the supplied remote device. This method + * disables normal IO requests from flowing through to the remote device. + * @remote_device: This parameter specifies the device to be stopped. + * @timeout: This parameter specifies the number of milliseconds in which the + * stop operation should complete. + * + * An indication of whether the device was successfully stopped. SCI_SUCCESS + * This value is returned if the transmission and reception for the device was + * successfully stopped. + */ +enum sci_status sci_remote_device_stop( + struct isci_remote_device *idev, + u32 timeout); + +/** + * sci_remote_device_reset() - This method will reset the device making it + * ready for operation. This method must be called anytime the device is + * reset either through a SMP phy control or a port hard reset request. + * @remote_device: This parameter specifies the device to be reset. + * + * This method does not actually cause the device hardware to be reset. This + * method resets the software object so that it will be operational after a + * device hardware reset completes. An indication of whether the device reset + * was accepted. SCI_SUCCESS This value is returned if the device reset is + * started. + */ +enum sci_status sci_remote_device_reset( + struct isci_remote_device *idev); + +/** + * sci_remote_device_reset_complete() - This method informs the device object + * that the reset operation is complete and the device can resume operation + * again. + * @remote_device: This parameter specifies the device which is to be informed + * of the reset complete operation. + * + * An indication that the device is resuming operation. SCI_SUCCESS the device + * is resuming operation. + */ +enum sci_status sci_remote_device_reset_complete( + struct isci_remote_device *idev); + +/** + * enum sci_remote_device_states - This enumeration depicts all the states + * for the common remote device state machine. + * + * + */ +enum sci_remote_device_states { + /** + * Simply the initial state for the base remote device state machine. + */ + SCI_DEV_INITIAL, + + /** + * This state indicates that the remote device has successfully been + * stopped. In this state no new IO operations are permitted. + * This state is entered from the INITIAL state. + * This state is entered from the STOPPING state. + */ + SCI_DEV_STOPPED, + + /** + * This state indicates the the remote device is in the process of + * becoming ready (i.e. starting). In this state no new IO operations + * are permitted. + * This state is entered from the STOPPED state. + */ + SCI_DEV_STARTING, + + /** + * This state indicates the remote device is now ready. Thus, the user + * is able to perform IO operations on the remote device. + * This state is entered from the STARTING state. + */ + SCI_DEV_READY, + + /** + * This is the idle substate for the stp remote device. When there are no + * active IO for the device it is is in this state. + */ + SCI_STP_DEV_IDLE, + + /** + * This is the command state for for the STP remote device. This state is + * entered when the device is processing a non-NCQ command. The device object + * will fail any new start IO requests until this command is complete. + */ + SCI_STP_DEV_CMD, + + /** + * This is the NCQ state for the STP remote device. This state is entered + * when the device is processing an NCQ reuqest. It will remain in this state + * so long as there is one or more NCQ requests being processed. + */ + SCI_STP_DEV_NCQ, + + /** + * This is the NCQ error state for the STP remote device. This state is + * entered when an SDB error FIS is received by the device object while in the + * NCQ state. The device object will only accept a READ LOG command while in + * this state. + */ + SCI_STP_DEV_NCQ_ERROR, + + /** + * This is the READY substate indicates the device is waiting for the RESET task + * coming to be recovered from certain hardware specific error. + */ + SCI_STP_DEV_AWAIT_RESET, + + /** + * This is the ready operational substate for the remote device. This is the + * normal operational state for a remote device. + */ + SCI_SMP_DEV_IDLE, + + /** + * This is the suspended state for the remote device. This is the state that + * the device is placed in when a RNC suspend is received by the SCU hardware. + */ + SCI_SMP_DEV_CMD, + + /** + * This state indicates that the remote device is in the process of + * stopping. In this state no new IO operations are permitted, but + * existing IO operations are allowed to complete. + * This state is entered from the READY state. + * This state is entered from the FAILED state. + */ + SCI_DEV_STOPPING, + + /** + * This state indicates that the remote device has failed. + * In this state no new IO operations are permitted. + * This state is entered from the INITIALIZING state. + * This state is entered from the READY state. + */ + SCI_DEV_FAILED, + + /** + * This state indicates the device is being reset. + * In this state no new IO operations are permitted. + * This state is entered from the READY state. + */ + SCI_DEV_RESETTING, + + /** + * Simply the final state for the base remote device state machine. + */ + SCI_DEV_FINAL, +}; + +static inline struct isci_remote_device *rnc_to_dev(struct sci_remote_node_context *rnc) +{ + struct isci_remote_device *idev; + + idev = container_of(rnc, typeof(*idev), rnc); + + return idev; +} + +static inline bool dev_is_expander(struct domain_device *dev) +{ + return dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV; +} + +static inline void sci_remote_device_decrement_request_count(struct isci_remote_device *idev) +{ + /* XXX delete this voodoo when converting to the top-level device + * reference count + */ + if (WARN_ONCE(idev->started_request_count == 0, + "%s: tried to decrement started_request_count past 0!?", + __func__)) + /* pass */; + else + idev->started_request_count--; +} + +enum sci_status sci_remote_device_frame_handler( + struct isci_remote_device *idev, + u32 frame_index); + +enum sci_status sci_remote_device_event_handler( + struct isci_remote_device *idev, + u32 event_code); + +enum sci_status sci_remote_device_start_io( + struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq); + +enum sci_status sci_remote_device_start_task( + struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq); + +enum sci_status sci_remote_device_complete_io( + struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq); + +enum sci_status sci_remote_device_suspend( + struct isci_remote_device *idev, + u32 suspend_type); + +void sci_remote_device_post_request( + struct isci_remote_device *idev, + u32 request); + +#endif /* !defined(_ISCI_REMOTE_DEVICE_H_) */ diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c new file mode 100644 index 000000000000..748e8339d1ec --- /dev/null +++ b/drivers/scsi/isci/remote_node_context.c @@ -0,0 +1,627 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "host.h" +#include "isci.h" +#include "remote_device.h" +#include "remote_node_context.h" +#include "scu_event_codes.h" +#include "scu_task_context.h" + + +/** + * + * @sci_rnc: The RNC for which the is posted request is being made. + * + * This method will return true if the RNC is not in the initial state. In all + * other states the RNC is considered active and this will return true. The + * destroy request of the state machine drives the RNC back to the initial + * state. If the state machine changes then this routine will also have to be + * changed. bool true if the state machine is not in the initial state false if + * the state machine is in the initial state + */ + +/** + * + * @sci_rnc: The state of the remote node context object to check. + * + * This method will return true if the remote node context is in a READY state + * otherwise it will return false bool true if the remote node context is in + * the ready state. false if the remote node context is not in the ready state. + */ +bool sci_remote_node_context_is_ready( + struct sci_remote_node_context *sci_rnc) +{ + u32 current_state = sci_rnc->sm.current_state_id; + + if (current_state == SCI_RNC_READY) { + return true; + } + + return false; +} + +static union scu_remote_node_context *sci_rnc_by_id(struct isci_host *ihost, u16 id) +{ + if (id < ihost->remote_node_entries && + ihost->device_table[id]) + return &ihost->remote_node_context_table[id]; + + return NULL; +} + +static void sci_remote_node_context_construct_buffer(struct sci_remote_node_context *sci_rnc) +{ + struct isci_remote_device *idev = rnc_to_dev(sci_rnc); + struct domain_device *dev = idev->domain_dev; + int rni = sci_rnc->remote_node_index; + union scu_remote_node_context *rnc; + struct isci_host *ihost; + __le64 sas_addr; + + ihost = idev->owning_port->owning_controller; + rnc = sci_rnc_by_id(ihost, rni); + + memset(rnc, 0, sizeof(union scu_remote_node_context) + * sci_remote_device_node_count(idev)); + + rnc->ssp.remote_node_index = rni; + rnc->ssp.remote_node_port_width = idev->device_port_width; + rnc->ssp.logical_port_index = idev->owning_port->physical_port_index; + + /* sas address is __be64, context ram format is __le64 */ + sas_addr = cpu_to_le64(SAS_ADDR(dev->sas_addr)); + rnc->ssp.remote_sas_address_hi = upper_32_bits(sas_addr); + rnc->ssp.remote_sas_address_lo = lower_32_bits(sas_addr); + + rnc->ssp.nexus_loss_timer_enable = true; + rnc->ssp.check_bit = false; + rnc->ssp.is_valid = false; + rnc->ssp.is_remote_node_context = true; + rnc->ssp.function_number = 0; + + rnc->ssp.arbitration_wait_time = 0; + + if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { + rnc->ssp.connection_occupancy_timeout = + ihost->user_parameters.stp_max_occupancy_timeout; + rnc->ssp.connection_inactivity_timeout = + ihost->user_parameters.stp_inactivity_timeout; + } else { + rnc->ssp.connection_occupancy_timeout = + ihost->user_parameters.ssp_max_occupancy_timeout; + rnc->ssp.connection_inactivity_timeout = + ihost->user_parameters.ssp_inactivity_timeout; + } + + rnc->ssp.initial_arbitration_wait_time = 0; + + /* Open Address Frame Parameters */ + rnc->ssp.oaf_connection_rate = idev->connection_rate; + rnc->ssp.oaf_features = 0; + rnc->ssp.oaf_source_zone_group = 0; + rnc->ssp.oaf_more_compatibility_features = 0; +} + +/** + * + * @sci_rnc: + * @callback: + * @callback_parameter: + * + * This method will setup the remote node context object so it will transition + * to its ready state. If the remote node context is already setup to + * transition to its final state then this function does nothing. none + */ +static void sci_remote_node_context_setup_to_resume( + struct sci_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, + void *callback_parameter) +{ + if (sci_rnc->destination_state != SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL) { + sci_rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY; + sci_rnc->user_callback = callback; + sci_rnc->user_cookie = callback_parameter; + } +} + +static void sci_remote_node_context_setup_to_destory( + struct sci_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, + void *callback_parameter) +{ + sci_rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL; + sci_rnc->user_callback = callback; + sci_rnc->user_cookie = callback_parameter; +} + +/** + * + * + * This method just calls the user callback function and then resets the + * callback. + */ +static void sci_remote_node_context_notify_user( + struct sci_remote_node_context *rnc) +{ + if (rnc->user_callback != NULL) { + (*rnc->user_callback)(rnc->user_cookie); + + rnc->user_callback = NULL; + rnc->user_cookie = NULL; + } +} + +static void sci_remote_node_context_continue_state_transitions(struct sci_remote_node_context *rnc) +{ + if (rnc->destination_state == SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY) + sci_remote_node_context_resume(rnc, rnc->user_callback, + rnc->user_cookie); +} + +static void sci_remote_node_context_validate_context_buffer(struct sci_remote_node_context *sci_rnc) +{ + union scu_remote_node_context *rnc_buffer; + struct isci_remote_device *idev = rnc_to_dev(sci_rnc); + struct domain_device *dev = idev->domain_dev; + struct isci_host *ihost = idev->owning_port->owning_controller; + + rnc_buffer = sci_rnc_by_id(ihost, sci_rnc->remote_node_index); + + rnc_buffer->ssp.is_valid = true; + + if (!idev->is_direct_attached && + (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP))) { + sci_remote_device_post_request(idev, SCU_CONTEXT_COMMAND_POST_RNC_96); + } else { + sci_remote_device_post_request(idev, SCU_CONTEXT_COMMAND_POST_RNC_32); + + if (idev->is_direct_attached) + sci_port_setup_transports(idev->owning_port, + sci_rnc->remote_node_index); + } +} + +static void sci_remote_node_context_invalidate_context_buffer(struct sci_remote_node_context *sci_rnc) +{ + union scu_remote_node_context *rnc_buffer; + struct isci_remote_device *idev = rnc_to_dev(sci_rnc); + struct isci_host *ihost = idev->owning_port->owning_controller; + + rnc_buffer = sci_rnc_by_id(ihost, sci_rnc->remote_node_index); + + rnc_buffer->ssp.is_valid = false; + + sci_remote_device_post_request(rnc_to_dev(sci_rnc), + SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE); +} + +static void sci_remote_node_context_initial_state_enter(struct sci_base_state_machine *sm) +{ + struct sci_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); + + /* Check to see if we have gotten back to the initial state because + * someone requested to destroy the remote node context object. + */ + if (sm->previous_state_id == SCI_RNC_INVALIDATING) { + rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED; + sci_remote_node_context_notify_user(rnc); + } +} + +static void sci_remote_node_context_posting_state_enter(struct sci_base_state_machine *sm) +{ + struct sci_remote_node_context *sci_rnc = container_of(sm, typeof(*sci_rnc), sm); + + sci_remote_node_context_validate_context_buffer(sci_rnc); +} + +static void sci_remote_node_context_invalidating_state_enter(struct sci_base_state_machine *sm) +{ + struct sci_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); + + sci_remote_node_context_invalidate_context_buffer(rnc); +} + +static void sci_remote_node_context_resuming_state_enter(struct sci_base_state_machine *sm) +{ + struct sci_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); + struct isci_remote_device *idev; + struct domain_device *dev; + + idev = rnc_to_dev(rnc); + dev = idev->domain_dev; + + /* + * For direct attached SATA devices we need to clear the TLCR + * NCQ to TCi tag mapping on the phy and in cases where we + * resume because of a target reset we also need to update + * the STPTLDARNI register with the RNi of the device + */ + if ((dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) && + idev->is_direct_attached) + sci_port_setup_transports(idev->owning_port, + rnc->remote_node_index); + + sci_remote_device_post_request(idev, SCU_CONTEXT_COMMAND_POST_RNC_RESUME); +} + +static void sci_remote_node_context_ready_state_enter(struct sci_base_state_machine *sm) +{ + struct sci_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); + + rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED; + + if (rnc->user_callback) + sci_remote_node_context_notify_user(rnc); +} + +static void sci_remote_node_context_tx_suspended_state_enter(struct sci_base_state_machine *sm) +{ + struct sci_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); + + sci_remote_node_context_continue_state_transitions(rnc); +} + +static void sci_remote_node_context_tx_rx_suspended_state_enter(struct sci_base_state_machine *sm) +{ + struct sci_remote_node_context *rnc = container_of(sm, typeof(*rnc), sm); + + sci_remote_node_context_continue_state_transitions(rnc); +} + +static const struct sci_base_state sci_remote_node_context_state_table[] = { + [SCI_RNC_INITIAL] = { + .enter_state = sci_remote_node_context_initial_state_enter, + }, + [SCI_RNC_POSTING] = { + .enter_state = sci_remote_node_context_posting_state_enter, + }, + [SCI_RNC_INVALIDATING] = { + .enter_state = sci_remote_node_context_invalidating_state_enter, + }, + [SCI_RNC_RESUMING] = { + .enter_state = sci_remote_node_context_resuming_state_enter, + }, + [SCI_RNC_READY] = { + .enter_state = sci_remote_node_context_ready_state_enter, + }, + [SCI_RNC_TX_SUSPENDED] = { + .enter_state = sci_remote_node_context_tx_suspended_state_enter, + }, + [SCI_RNC_TX_RX_SUSPENDED] = { + .enter_state = sci_remote_node_context_tx_rx_suspended_state_enter, + }, + [SCI_RNC_AWAIT_SUSPENSION] = { }, +}; + +void sci_remote_node_context_construct(struct sci_remote_node_context *rnc, + u16 remote_node_index) +{ + memset(rnc, 0, sizeof(struct sci_remote_node_context)); + + rnc->remote_node_index = remote_node_index; + rnc->destination_state = SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED; + + sci_init_sm(&rnc->sm, sci_remote_node_context_state_table, SCI_RNC_INITIAL); +} + +enum sci_status sci_remote_node_context_event_handler(struct sci_remote_node_context *sci_rnc, + u32 event_code) +{ + enum scis_sds_remote_node_context_states state; + + state = sci_rnc->sm.current_state_id; + switch (state) { + case SCI_RNC_POSTING: + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_POST_RNC_COMPLETE: + sci_change_state(&sci_rnc->sm, SCI_RNC_READY); + break; + default: + goto out; + } + break; + case SCI_RNC_INVALIDATING: + if (scu_get_event_code(event_code) == SCU_EVENT_POST_RNC_INVALIDATE_COMPLETE) { + if (sci_rnc->destination_state == SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL) + state = SCI_RNC_INITIAL; + else + state = SCI_RNC_POSTING; + sci_change_state(&sci_rnc->sm, state); + } else { + switch (scu_get_event_type(event_code)) { + case SCU_EVENT_TYPE_RNC_SUSPEND_TX: + case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: + /* We really dont care if the hardware is going to suspend + * the device since it's being invalidated anyway */ + dev_dbg(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: SCIC Remote Node Context 0x%p was " + "suspeneded by hardware while being " + "invalidated.\n", __func__, sci_rnc); + break; + default: + goto out; + } + } + break; + case SCI_RNC_RESUMING: + if (scu_get_event_code(event_code) == SCU_EVENT_POST_RCN_RELEASE) { + sci_change_state(&sci_rnc->sm, SCI_RNC_READY); + } else { + switch (scu_get_event_type(event_code)) { + case SCU_EVENT_TYPE_RNC_SUSPEND_TX: + case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: + /* We really dont care if the hardware is going to suspend + * the device since it's being resumed anyway */ + dev_dbg(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: SCIC Remote Node Context 0x%p was " + "suspeneded by hardware while being resumed.\n", + __func__, sci_rnc); + break; + default: + goto out; + } + } + break; + case SCI_RNC_READY: + switch (scu_get_event_type(event_code)) { + case SCU_EVENT_TL_RNC_SUSPEND_TX: + sci_change_state(&sci_rnc->sm, SCI_RNC_TX_SUSPENDED); + sci_rnc->suspension_code = scu_get_event_specifier(event_code); + break; + case SCU_EVENT_TL_RNC_SUSPEND_TX_RX: + sci_change_state(&sci_rnc->sm, SCI_RNC_TX_RX_SUSPENDED); + sci_rnc->suspension_code = scu_get_event_specifier(event_code); + break; + default: + goto out; + } + break; + case SCI_RNC_AWAIT_SUSPENSION: + switch (scu_get_event_type(event_code)) { + case SCU_EVENT_TL_RNC_SUSPEND_TX: + sci_change_state(&sci_rnc->sm, SCI_RNC_TX_SUSPENDED); + sci_rnc->suspension_code = scu_get_event_specifier(event_code); + break; + case SCU_EVENT_TL_RNC_SUSPEND_TX_RX: + sci_change_state(&sci_rnc->sm, SCI_RNC_TX_RX_SUSPENDED); + sci_rnc->suspension_code = scu_get_event_specifier(event_code); + break; + default: + goto out; + } + break; + default: + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: invalid state %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + return SCI_SUCCESS; + + out: + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: code: %#x state: %d\n", __func__, event_code, state); + return SCI_FAILURE; + +} + +enum sci_status sci_remote_node_context_destruct(struct sci_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback cb_fn, + void *cb_p) +{ + enum scis_sds_remote_node_context_states state; + + state = sci_rnc->sm.current_state_id; + switch (state) { + case SCI_RNC_INVALIDATING: + sci_remote_node_context_setup_to_destory(sci_rnc, cb_fn, cb_p); + return SCI_SUCCESS; + case SCI_RNC_POSTING: + case SCI_RNC_RESUMING: + case SCI_RNC_READY: + case SCI_RNC_TX_SUSPENDED: + case SCI_RNC_TX_RX_SUSPENDED: + case SCI_RNC_AWAIT_SUSPENSION: + sci_remote_node_context_setup_to_destory(sci_rnc, cb_fn, cb_p); + sci_change_state(&sci_rnc->sm, SCI_RNC_INVALIDATING); + return SCI_SUCCESS; + case SCI_RNC_INITIAL: + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: invalid state %d\n", __func__, state); + /* We have decided that the destruct request on the remote node context + * can not fail since it is either in the initial/destroyed state or is + * can be destroyed. + */ + return SCI_SUCCESS; + default: + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: invalid state %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } +} + +enum sci_status sci_remote_node_context_suspend(struct sci_remote_node_context *sci_rnc, + u32 suspend_type, + scics_sds_remote_node_context_callback cb_fn, + void *cb_p) +{ + enum scis_sds_remote_node_context_states state; + + state = sci_rnc->sm.current_state_id; + if (state != SCI_RNC_READY) { + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: invalid state %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + sci_rnc->user_callback = cb_fn; + sci_rnc->user_cookie = cb_p; + sci_rnc->suspension_code = suspend_type; + + if (suspend_type == SCI_SOFTWARE_SUSPENSION) { + sci_remote_device_post_request(rnc_to_dev(sci_rnc), + SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX); + } + + sci_change_state(&sci_rnc->sm, SCI_RNC_AWAIT_SUSPENSION); + return SCI_SUCCESS; +} + +enum sci_status sci_remote_node_context_resume(struct sci_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback cb_fn, + void *cb_p) +{ + enum scis_sds_remote_node_context_states state; + + state = sci_rnc->sm.current_state_id; + switch (state) { + case SCI_RNC_INITIAL: + if (sci_rnc->remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) + return SCI_FAILURE_INVALID_STATE; + + sci_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p); + sci_remote_node_context_construct_buffer(sci_rnc); + sci_change_state(&sci_rnc->sm, SCI_RNC_POSTING); + return SCI_SUCCESS; + case SCI_RNC_POSTING: + case SCI_RNC_INVALIDATING: + case SCI_RNC_RESUMING: + if (sci_rnc->destination_state != SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY) + return SCI_FAILURE_INVALID_STATE; + + sci_rnc->user_callback = cb_fn; + sci_rnc->user_cookie = cb_p; + return SCI_SUCCESS; + case SCI_RNC_TX_SUSPENDED: { + struct isci_remote_device *idev = rnc_to_dev(sci_rnc); + struct domain_device *dev = idev->domain_dev; + + sci_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p); + + /* TODO: consider adding a resume action of NONE, INVALIDATE, WRITE_TLCR */ + if (dev->dev_type == SAS_END_DEV || dev_is_expander(dev)) + sci_change_state(&sci_rnc->sm, SCI_RNC_RESUMING); + else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { + if (idev->is_direct_attached) { + /* @todo Fix this since I am being silly in writing to the STPTLDARNI register. */ + sci_change_state(&sci_rnc->sm, SCI_RNC_RESUMING); + } else { + sci_change_state(&sci_rnc->sm, SCI_RNC_INVALIDATING); + } + } else + return SCI_FAILURE; + return SCI_SUCCESS; + } + case SCI_RNC_TX_RX_SUSPENDED: + sci_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p); + sci_change_state(&sci_rnc->sm, SCI_RNC_RESUMING); + return SCI_FAILURE_INVALID_STATE; + case SCI_RNC_AWAIT_SUSPENSION: + sci_remote_node_context_setup_to_resume(sci_rnc, cb_fn, cb_p); + return SCI_SUCCESS; + default: + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: invalid state %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } +} + +enum sci_status sci_remote_node_context_start_io(struct sci_remote_node_context *sci_rnc, + struct isci_request *ireq) +{ + enum scis_sds_remote_node_context_states state; + + state = sci_rnc->sm.current_state_id; + + switch (state) { + case SCI_RNC_READY: + return SCI_SUCCESS; + case SCI_RNC_TX_SUSPENDED: + case SCI_RNC_TX_RX_SUSPENDED: + case SCI_RNC_AWAIT_SUSPENSION: + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: invalid state %d\n", __func__, state); + return SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; + default: + break; + } + dev_dbg(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: requested to start IO while still resuming, %d\n", + __func__, state); + return SCI_FAILURE_INVALID_STATE; +} + +enum sci_status sci_remote_node_context_start_task(struct sci_remote_node_context *sci_rnc, + struct isci_request *ireq) +{ + enum scis_sds_remote_node_context_states state; + + state = sci_rnc->sm.current_state_id; + switch (state) { + case SCI_RNC_RESUMING: + case SCI_RNC_READY: + case SCI_RNC_AWAIT_SUSPENSION: + return SCI_SUCCESS; + case SCI_RNC_TX_SUSPENDED: + case SCI_RNC_TX_RX_SUSPENDED: + sci_remote_node_context_resume(sci_rnc, NULL, NULL); + return SCI_SUCCESS; + default: + dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)), + "%s: invalid state %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } +} diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h new file mode 100644 index 000000000000..41580ad12520 --- /dev/null +++ b/drivers/scsi/isci/remote_node_context.h @@ -0,0 +1,224 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_SDS_REMOTE_NODE_CONTEXT_H_ +#define _SCIC_SDS_REMOTE_NODE_CONTEXT_H_ + +/** + * This file contains the structures, constants, and prototypes associated with + * the remote node context in the silicon. It exists to model and manage + * the remote node context in the silicon. + * + * + */ + +#include "isci.h" + +/** + * + * + * This constant represents an invalid remote device id, it is used to program + * the STPDARNI register so the driver knows when it has received a SIGNATURE + * FIS from the SCU. + */ +#define SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX 0x0FFF + +#define SCU_HARDWARE_SUSPENSION (0) +#define SCI_SOFTWARE_SUSPENSION (1) + +struct isci_request; +struct isci_remote_device; +struct sci_remote_node_context; + +typedef void (*scics_sds_remote_node_context_callback)(void *); + +/** + * This is the enumeration of the remote node context states. + */ +enum scis_sds_remote_node_context_states { + /** + * This state is the initial state for a remote node context. On a resume + * request the remote node context will transition to the posting state. + */ + SCI_RNC_INITIAL, + + /** + * This is a transition state that posts the RNi to the hardware. Once the RNC + * is posted the remote node context will be made ready. + */ + SCI_RNC_POSTING, + + /** + * This is a transition state that will post an RNC invalidate to the + * hardware. Once the invalidate is complete the remote node context will + * transition to the posting state. + */ + SCI_RNC_INVALIDATING, + + /** + * This is a transition state that will post an RNC resume to the hardare. + * Once the event notification of resume complete is received the remote node + * context will transition to the ready state. + */ + SCI_RNC_RESUMING, + + /** + * This is the state that the remote node context must be in to accept io + * request operations. + */ + SCI_RNC_READY, + + /** + * This is the state that the remote node context transitions to when it gets + * a TX suspend notification from the hardware. + */ + SCI_RNC_TX_SUSPENDED, + + /** + * This is the state that the remote node context transitions to when it gets + * a TX RX suspend notification from the hardware. + */ + SCI_RNC_TX_RX_SUSPENDED, + + /** + * This state is a wait state for the remote node context that waits for a + * suspend notification from the hardware. This state is entered when either + * there is a request to supend the remote node context or when there is a TC + * completion where the remote node will be suspended by the hardware. + */ + SCI_RNC_AWAIT_SUSPENSION +}; + +/** + * + * + * This enumeration is used to define the end destination state for the remote + * node context. + */ +enum sci_remote_node_context_destination_state { + SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_UNSPECIFIED, + SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_READY, + SCIC_SDS_REMOTE_NODE_DESTINATION_STATE_FINAL +}; + +/** + * struct sci_remote_node_context - This structure contains the data + * associated with the remote node context object. The remote node context + * (RNC) object models the the remote device information necessary to manage + * the silicon RNC. + */ +struct sci_remote_node_context { + /** + * This field indicates the remote node index (RNI) associated with + * this RNC. + */ + u16 remote_node_index; + + /** + * This field is the recored suspension code or the reason for the remote node + * context suspension. + */ + u32 suspension_code; + + /** + * This field is true if the remote node context is resuming from its current + * state. This can cause an automatic resume on receiving a suspension + * notification. + */ + enum sci_remote_node_context_destination_state destination_state; + + /** + * This field contains the callback function that the user requested to be + * called when the requested state transition is complete. + */ + scics_sds_remote_node_context_callback user_callback; + + /** + * This field contains the parameter that is called when the user requested + * state transition is completed. + */ + void *user_cookie; + + /** + * This field contains the data for the object's state machine. + */ + struct sci_base_state_machine sm; +}; + +void sci_remote_node_context_construct(struct sci_remote_node_context *rnc, + u16 remote_node_index); + + +bool sci_remote_node_context_is_ready( + struct sci_remote_node_context *sci_rnc); + +enum sci_status sci_remote_node_context_event_handler(struct sci_remote_node_context *sci_rnc, + u32 event_code); +enum sci_status sci_remote_node_context_destruct(struct sci_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback callback, + void *callback_parameter); +enum sci_status sci_remote_node_context_suspend(struct sci_remote_node_context *sci_rnc, + u32 suspend_type, + scics_sds_remote_node_context_callback cb_fn, + void *cb_p); +enum sci_status sci_remote_node_context_resume(struct sci_remote_node_context *sci_rnc, + scics_sds_remote_node_context_callback cb_fn, + void *cb_p); +enum sci_status sci_remote_node_context_start_task(struct sci_remote_node_context *sci_rnc, + struct isci_request *ireq); +enum sci_status sci_remote_node_context_start_io(struct sci_remote_node_context *sci_rnc, + struct isci_request *ireq); + +#endif /* _SCIC_SDS_REMOTE_NODE_CONTEXT_H_ */ diff --git a/drivers/scsi/isci/remote_node_table.c b/drivers/scsi/isci/remote_node_table.c new file mode 100644 index 000000000000..301b3141945e --- /dev/null +++ b/drivers/scsi/isci/remote_node_table.c @@ -0,0 +1,598 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * This file contains the implementation of the SCIC_SDS_REMOTE_NODE_TABLE + * public, protected, and private methods. + * + * + */ +#include "remote_node_table.h" +#include "remote_node_context.h" + +/** + * + * @remote_node_table: This is the remote node index table from which the + * selection will be made. + * @group_table_index: This is the index to the group table from which to + * search for an available selection. + * + * This routine will find the bit position in absolute bit terms of the next 32 + * + bit position. If there are available bits in the first u32 then it is + * just bit position. u32 This is the absolute bit position for an available + * group. + */ +static u32 sci_remote_node_table_get_group_index( + struct sci_remote_node_table *remote_node_table, + u32 group_table_index) +{ + u32 dword_index; + u32 *group_table; + u32 bit_index; + + group_table = remote_node_table->remote_node_groups[group_table_index]; + + for (dword_index = 0; dword_index < remote_node_table->group_array_size; dword_index++) { + if (group_table[dword_index] != 0) { + for (bit_index = 0; bit_index < 32; bit_index++) { + if ((group_table[dword_index] & (1 << bit_index)) != 0) { + return (dword_index * 32) + bit_index; + } + } + } + } + + return SCIC_SDS_REMOTE_NODE_TABLE_INVALID_INDEX; +} + +/** + * + * @out]: remote_node_table This the remote node table in which to clear the + * selector. + * @set_index: This is the remote node selector in which the change will be + * made. + * @group_index: This is the bit index in the table to be modified. + * + * This method will clear the group index entry in the specified group index + * table. none + */ +static void sci_remote_node_table_clear_group_index( + struct sci_remote_node_table *remote_node_table, + u32 group_table_index, + u32 group_index) +{ + u32 dword_index; + u32 bit_index; + u32 *group_table; + + BUG_ON(group_table_index >= SCU_STP_REMOTE_NODE_COUNT); + BUG_ON(group_index >= (u32)(remote_node_table->group_array_size * 32)); + + dword_index = group_index / 32; + bit_index = group_index % 32; + group_table = remote_node_table->remote_node_groups[group_table_index]; + + group_table[dword_index] = group_table[dword_index] & ~(1 << bit_index); +} + +/** + * + * @out]: remote_node_table This the remote node table in which to set the + * selector. + * @group_table_index: This is the remote node selector in which the change + * will be made. + * @group_index: This is the bit position in the table to be modified. + * + * This method will set the group index bit entry in the specified gropu index + * table. none + */ +static void sci_remote_node_table_set_group_index( + struct sci_remote_node_table *remote_node_table, + u32 group_table_index, + u32 group_index) +{ + u32 dword_index; + u32 bit_index; + u32 *group_table; + + BUG_ON(group_table_index >= SCU_STP_REMOTE_NODE_COUNT); + BUG_ON(group_index >= (u32)(remote_node_table->group_array_size * 32)); + + dword_index = group_index / 32; + bit_index = group_index % 32; + group_table = remote_node_table->remote_node_groups[group_table_index]; + + group_table[dword_index] = group_table[dword_index] | (1 << bit_index); +} + +/** + * + * @out]: remote_node_table This is the remote node table in which to modify + * the remote node availability. + * @remote_node_index: This is the remote node index that is being returned to + * the table. + * + * This method will set the remote to available in the remote node allocation + * table. none + */ +static void sci_remote_node_table_set_node_index( + struct sci_remote_node_table *remote_node_table, + u32 remote_node_index) +{ + u32 dword_location; + u32 dword_remainder; + u32 slot_normalized; + u32 slot_position; + + BUG_ON( + (remote_node_table->available_nodes_array_size * SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD) + <= (remote_node_index / SCU_STP_REMOTE_NODE_COUNT) + ); + + dword_location = remote_node_index / SCIC_SDS_REMOTE_NODES_PER_DWORD; + dword_remainder = remote_node_index % SCIC_SDS_REMOTE_NODES_PER_DWORD; + slot_normalized = (dword_remainder / SCU_STP_REMOTE_NODE_COUNT) * sizeof(u32); + slot_position = remote_node_index % SCU_STP_REMOTE_NODE_COUNT; + + remote_node_table->available_remote_nodes[dword_location] |= + 1 << (slot_normalized + slot_position); +} + +/** + * + * @out]: remote_node_table This is the remote node table from which to clear + * the available remote node bit. + * @remote_node_index: This is the remote node index which is to be cleared + * from the table. + * + * This method clears the remote node index from the table of available remote + * nodes. none + */ +static void sci_remote_node_table_clear_node_index( + struct sci_remote_node_table *remote_node_table, + u32 remote_node_index) +{ + u32 dword_location; + u32 dword_remainder; + u32 slot_position; + u32 slot_normalized; + + BUG_ON( + (remote_node_table->available_nodes_array_size * SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD) + <= (remote_node_index / SCU_STP_REMOTE_NODE_COUNT) + ); + + dword_location = remote_node_index / SCIC_SDS_REMOTE_NODES_PER_DWORD; + dword_remainder = remote_node_index % SCIC_SDS_REMOTE_NODES_PER_DWORD; + slot_normalized = (dword_remainder / SCU_STP_REMOTE_NODE_COUNT) * sizeof(u32); + slot_position = remote_node_index % SCU_STP_REMOTE_NODE_COUNT; + + remote_node_table->available_remote_nodes[dword_location] &= + ~(1 << (slot_normalized + slot_position)); +} + +/** + * + * @out]: remote_node_table The remote node table from which the slot will be + * cleared. + * @group_index: The index for the slot that is to be cleared. + * + * This method clears the entire table slot at the specified slot index. none + */ +static void sci_remote_node_table_clear_group( + struct sci_remote_node_table *remote_node_table, + u32 group_index) +{ + u32 dword_location; + u32 dword_remainder; + u32 dword_value; + + BUG_ON( + (remote_node_table->available_nodes_array_size * SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD) + <= (group_index / SCU_STP_REMOTE_NODE_COUNT) + ); + + dword_location = group_index / SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; + dword_remainder = group_index % SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; + + dword_value = remote_node_table->available_remote_nodes[dword_location]; + dword_value &= ~(SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE << (dword_remainder * 4)); + remote_node_table->available_remote_nodes[dword_location] = dword_value; +} + +/** + * + * @remote_node_table: + * + * THis method sets an entire remote node group in the remote node table. + */ +static void sci_remote_node_table_set_group( + struct sci_remote_node_table *remote_node_table, + u32 group_index) +{ + u32 dword_location; + u32 dword_remainder; + u32 dword_value; + + BUG_ON( + (remote_node_table->available_nodes_array_size * SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD) + <= (group_index / SCU_STP_REMOTE_NODE_COUNT) + ); + + dword_location = group_index / SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; + dword_remainder = group_index % SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; + + dword_value = remote_node_table->available_remote_nodes[dword_location]; + dword_value |= (SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE << (dword_remainder * 4)); + remote_node_table->available_remote_nodes[dword_location] = dword_value; +} + +/** + * + * @remote_node_table: This is the remote node table that for which the group + * value is to be returned. + * @group_index: This is the group index to use to find the group value. + * + * This method will return the group value for the specified group index. The + * bit values at the specified remote node group index. + */ +static u8 sci_remote_node_table_get_group_value( + struct sci_remote_node_table *remote_node_table, + u32 group_index) +{ + u32 dword_location; + u32 dword_remainder; + u32 dword_value; + + dword_location = group_index / SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; + dword_remainder = group_index % SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; + + dword_value = remote_node_table->available_remote_nodes[dword_location]; + dword_value &= (SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE << (dword_remainder * 4)); + dword_value = dword_value >> (dword_remainder * 4); + + return (u8)dword_value; +} + +/** + * + * @out]: remote_node_table The remote that which is to be initialized. + * @remote_node_entries: The number of entries to put in the table. + * + * This method will initialize the remote node table for use. none + */ +void sci_remote_node_table_initialize( + struct sci_remote_node_table *remote_node_table, + u32 remote_node_entries) +{ + u32 index; + + /* + * Initialize the raw data we could improve the speed by only initializing + * those entries that we are actually going to be used */ + memset( + remote_node_table->available_remote_nodes, + 0x00, + sizeof(remote_node_table->available_remote_nodes) + ); + + memset( + remote_node_table->remote_node_groups, + 0x00, + sizeof(remote_node_table->remote_node_groups) + ); + + /* Initialize the available remote node sets */ + remote_node_table->available_nodes_array_size = (u16) + (remote_node_entries / SCIC_SDS_REMOTE_NODES_PER_DWORD) + + ((remote_node_entries % SCIC_SDS_REMOTE_NODES_PER_DWORD) != 0); + + + /* Initialize each full DWORD to a FULL SET of remote nodes */ + for (index = 0; index < remote_node_entries; index++) { + sci_remote_node_table_set_node_index(remote_node_table, index); + } + + remote_node_table->group_array_size = (u16) + (remote_node_entries / (SCU_STP_REMOTE_NODE_COUNT * 32)) + + ((remote_node_entries % (SCU_STP_REMOTE_NODE_COUNT * 32)) != 0); + + for (index = 0; index < (remote_node_entries / SCU_STP_REMOTE_NODE_COUNT); index++) { + /* + * These are all guaranteed to be full slot values so fill them in the + * available sets of 3 remote nodes */ + sci_remote_node_table_set_group_index(remote_node_table, 2, index); + } + + /* Now fill in any remainders that we may find */ + if ((remote_node_entries % SCU_STP_REMOTE_NODE_COUNT) == 2) { + sci_remote_node_table_set_group_index(remote_node_table, 1, index); + } else if ((remote_node_entries % SCU_STP_REMOTE_NODE_COUNT) == 1) { + sci_remote_node_table_set_group_index(remote_node_table, 0, index); + } +} + +/** + * + * @out]: remote_node_table The remote node table from which to allocate a + * remote node. + * @table_index: The group index that is to be used for the search. + * + * This method will allocate a single RNi from the remote node table. The + * table index will determine from which remote node group table to search. + * This search may fail and another group node table can be specified. The + * function is designed to allow a serach of the available single remote node + * group up to the triple remote node group. If an entry is found in the + * specified table the remote node is removed and the remote node groups are + * updated. The RNi value or an invalid remote node context if an RNi can not + * be found. + */ +static u16 sci_remote_node_table_allocate_single_remote_node( + struct sci_remote_node_table *remote_node_table, + u32 group_table_index) +{ + u8 index; + u8 group_value; + u32 group_index; + u16 remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; + + group_index = sci_remote_node_table_get_group_index( + remote_node_table, group_table_index); + + /* We could not find an available slot in the table selector 0 */ + if (group_index != SCIC_SDS_REMOTE_NODE_TABLE_INVALID_INDEX) { + group_value = sci_remote_node_table_get_group_value( + remote_node_table, group_index); + + for (index = 0; index < SCU_STP_REMOTE_NODE_COUNT; index++) { + if (((1 << index) & group_value) != 0) { + /* We have selected a bit now clear it */ + remote_node_index = (u16)(group_index * SCU_STP_REMOTE_NODE_COUNT + + index); + + sci_remote_node_table_clear_group_index( + remote_node_table, group_table_index, group_index + ); + + sci_remote_node_table_clear_node_index( + remote_node_table, remote_node_index + ); + + if (group_table_index > 0) { + sci_remote_node_table_set_group_index( + remote_node_table, group_table_index - 1, group_index + ); + } + + break; + } + } + } + + return remote_node_index; +} + +/** + * + * @remote_node_table: This is the remote node table from which to allocate the + * remote node entries. + * @group_table_index: THis is the group table index which must equal two (2) + * for this operation. + * + * This method will allocate three consecutive remote node context entries. If + * there are no remaining triple entries the function will return a failure. + * The remote node index that represents three consecutive remote node entries + * or an invalid remote node context if none can be found. + */ +static u16 sci_remote_node_table_allocate_triple_remote_node( + struct sci_remote_node_table *remote_node_table, + u32 group_table_index) +{ + u32 group_index; + u16 remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; + + group_index = sci_remote_node_table_get_group_index( + remote_node_table, group_table_index); + + if (group_index != SCIC_SDS_REMOTE_NODE_TABLE_INVALID_INDEX) { + remote_node_index = (u16)group_index * SCU_STP_REMOTE_NODE_COUNT; + + sci_remote_node_table_clear_group_index( + remote_node_table, group_table_index, group_index + ); + + sci_remote_node_table_clear_group( + remote_node_table, group_index + ); + } + + return remote_node_index; +} + +/** + * + * @remote_node_table: This is the remote node table from which the remote node + * allocation is to take place. + * @remote_node_count: This is ther remote node count which is one of + * SCU_SSP_REMOTE_NODE_COUNT(1) or SCU_STP_REMOTE_NODE_COUNT(3). + * + * This method will allocate a remote node that mataches the remote node count + * specified by the caller. Valid values for remote node count is + * SCU_SSP_REMOTE_NODE_COUNT(1) or SCU_STP_REMOTE_NODE_COUNT(3). u16 This is + * the remote node index that is returned or an invalid remote node context. + */ +u16 sci_remote_node_table_allocate_remote_node( + struct sci_remote_node_table *remote_node_table, + u32 remote_node_count) +{ + u16 remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; + + if (remote_node_count == SCU_SSP_REMOTE_NODE_COUNT) { + remote_node_index = + sci_remote_node_table_allocate_single_remote_node( + remote_node_table, 0); + + if (remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { + remote_node_index = + sci_remote_node_table_allocate_single_remote_node( + remote_node_table, 1); + } + + if (remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { + remote_node_index = + sci_remote_node_table_allocate_single_remote_node( + remote_node_table, 2); + } + } else if (remote_node_count == SCU_STP_REMOTE_NODE_COUNT) { + remote_node_index = + sci_remote_node_table_allocate_triple_remote_node( + remote_node_table, 2); + } + + return remote_node_index; +} + +/** + * + * @remote_node_table: + * + * This method will free a single remote node index back to the remote node + * table. This routine will update the remote node groups + */ +static void sci_remote_node_table_release_single_remote_node( + struct sci_remote_node_table *remote_node_table, + u16 remote_node_index) +{ + u32 group_index; + u8 group_value; + + group_index = remote_node_index / SCU_STP_REMOTE_NODE_COUNT; + + group_value = sci_remote_node_table_get_group_value(remote_node_table, group_index); + + /* + * Assert that we are not trying to add an entry to a slot that is already + * full. */ + BUG_ON(group_value == SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE); + + if (group_value == 0x00) { + /* + * There are no entries in this slot so it must be added to the single + * slot table. */ + sci_remote_node_table_set_group_index(remote_node_table, 0, group_index); + } else if ((group_value & (group_value - 1)) == 0) { + /* + * There is only one entry in this slot so it must be moved from the + * single slot table to the dual slot table */ + sci_remote_node_table_clear_group_index(remote_node_table, 0, group_index); + sci_remote_node_table_set_group_index(remote_node_table, 1, group_index); + } else { + /* + * There are two entries in the slot so it must be moved from the dual + * slot table to the tripple slot table. */ + sci_remote_node_table_clear_group_index(remote_node_table, 1, group_index); + sci_remote_node_table_set_group_index(remote_node_table, 2, group_index); + } + + sci_remote_node_table_set_node_index(remote_node_table, remote_node_index); +} + +/** + * + * @remote_node_table: This is the remote node table to which the remote node + * index is to be freed. + * + * This method will release a group of three consecutive remote nodes back to + * the free remote nodes. + */ +static void sci_remote_node_table_release_triple_remote_node( + struct sci_remote_node_table *remote_node_table, + u16 remote_node_index) +{ + u32 group_index; + + group_index = remote_node_index / SCU_STP_REMOTE_NODE_COUNT; + + sci_remote_node_table_set_group_index( + remote_node_table, 2, group_index + ); + + sci_remote_node_table_set_group(remote_node_table, group_index); +} + +/** + * + * @remote_node_table: The remote node table to which the remote node index is + * to be freed. + * @remote_node_count: This is the count of consecutive remote nodes that are + * to be freed. + * + * This method will release the remote node index back into the remote node + * table free pool. + */ +void sci_remote_node_table_release_remote_node_index( + struct sci_remote_node_table *remote_node_table, + u32 remote_node_count, + u16 remote_node_index) +{ + if (remote_node_count == SCU_SSP_REMOTE_NODE_COUNT) { + sci_remote_node_table_release_single_remote_node( + remote_node_table, remote_node_index); + } else if (remote_node_count == SCU_STP_REMOTE_NODE_COUNT) { + sci_remote_node_table_release_triple_remote_node( + remote_node_table, remote_node_index); + } +} + diff --git a/drivers/scsi/isci/remote_node_table.h b/drivers/scsi/isci/remote_node_table.h new file mode 100644 index 000000000000..721ab982d2ac --- /dev/null +++ b/drivers/scsi/isci/remote_node_table.h @@ -0,0 +1,188 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_SDS_REMOTE_NODE_TABLE_H_ +#define _SCIC_SDS_REMOTE_NODE_TABLE_H_ + +#include "isci.h" + +/** + * + * + * Remote node sets are sets of remote node index in the remtoe node table The + * SCU hardware requires that STP remote node entries take three consecutive + * remote node index so the table is arranged in sets of three. The bits are + * used as 0111 0111 to make a byte and the bits define the set of three remote + * nodes to use as a sequence. + */ +#define SCIC_SDS_REMOTE_NODE_SETS_PER_BYTE 2 + +/** + * + * + * Since the remote node table is organized as DWORDS take the remote node sets + * in bytes and represent them in DWORDs. The lowest ordered bits are the ones + * used in case full DWORD is not being used. i.e. 0000 0000 0000 0000 0111 + * 0111 0111 0111 // if only a single WORD is in use in the DWORD. + */ +#define SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD \ + (sizeof(u32) * SCIC_SDS_REMOTE_NODE_SETS_PER_BYTE) +/** + * + * + * This is a count of the numeber of remote nodes that can be represented in a + * byte + */ +#define SCIC_SDS_REMOTE_NODES_PER_BYTE \ + (SCU_STP_REMOTE_NODE_COUNT * SCIC_SDS_REMOTE_NODE_SETS_PER_BYTE) + +/** + * + * + * This is a count of the number of remote nodes that can be represented in a + * DWROD + */ +#define SCIC_SDS_REMOTE_NODES_PER_DWORD \ + (sizeof(u32) * SCIC_SDS_REMOTE_NODES_PER_BYTE) + +/** + * + * + * This is the number of bits in a remote node group + */ +#define SCIC_SDS_REMOTE_NODES_BITS_PER_GROUP 4 + +#define SCIC_SDS_REMOTE_NODE_TABLE_INVALID_INDEX (0xFFFFFFFF) +#define SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE (0x07) +#define SCIC_SDS_REMOTE_NODE_TABLE_EMPTY_SLOT_VALUE (0x00) + +/** + * + * + * Expander attached sata remote node count + */ +#define SCU_STP_REMOTE_NODE_COUNT 3 + +/** + * + * + * Expander or direct attached ssp remote node count + */ +#define SCU_SSP_REMOTE_NODE_COUNT 1 + +/** + * + * + * Direct attached STP remote node count + */ +#define SCU_SATA_REMOTE_NODE_COUNT 1 + +/** + * struct sci_remote_node_table - + * + * + */ +struct sci_remote_node_table { + /** + * This field contains the array size in dwords + */ + u16 available_nodes_array_size; + + /** + * This field contains the array size of the + */ + u16 group_array_size; + + /** + * This field is the array of available remote node entries in bits. + * Because of the way STP remote node data is allocated on the SCU hardware + * the remote nodes must occupy three consecutive remote node context + * entries. For ease of allocation and de-allocation we have broken the + * sets of three into a single nibble. When the STP RNi is allocated all + * of the bits in the nibble are cleared. This math results in a table size + * of MAX_REMOTE_NODES / CONSECUTIVE RNi ENTRIES for STP / 2 entries per byte. + */ + u32 available_remote_nodes[ + (SCI_MAX_REMOTE_DEVICES / SCIC_SDS_REMOTE_NODES_PER_DWORD) + + ((SCI_MAX_REMOTE_DEVICES % SCIC_SDS_REMOTE_NODES_PER_DWORD) != 0)]; + + /** + * This field is the nibble selector for the above table. There are three + * possible selectors each for fast lookup when trying to find one, two or + * three remote node entries. + */ + u32 remote_node_groups[ + SCU_STP_REMOTE_NODE_COUNT][ + (SCI_MAX_REMOTE_DEVICES / (32 * SCU_STP_REMOTE_NODE_COUNT)) + + ((SCI_MAX_REMOTE_DEVICES % (32 * SCU_STP_REMOTE_NODE_COUNT)) != 0)]; + +}; + +/* --------------------------------------------------------------------------- */ + +void sci_remote_node_table_initialize( + struct sci_remote_node_table *remote_node_table, + u32 remote_node_entries); + +u16 sci_remote_node_table_allocate_remote_node( + struct sci_remote_node_table *remote_node_table, + u32 remote_node_count); + +void sci_remote_node_table_release_remote_node_index( + struct sci_remote_node_table *remote_node_table, + u32 remote_node_count, + u16 remote_node_index); + +#endif /* _SCIC_SDS_REMOTE_NODE_TABLE_H_ */ diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c new file mode 100644 index 000000000000..a46e07ac789f --- /dev/null +++ b/drivers/scsi/isci/request.c @@ -0,0 +1,3391 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "isci.h" +#include "task.h" +#include "request.h" +#include "scu_completion_codes.h" +#include "scu_event_codes.h" +#include "sas.h" + +static struct scu_sgl_element_pair *to_sgl_element_pair(struct isci_request *ireq, + int idx) +{ + if (idx == 0) + return &ireq->tc->sgl_pair_ab; + else if (idx == 1) + return &ireq->tc->sgl_pair_cd; + else if (idx < 0) + return NULL; + else + return &ireq->sg_table[idx - 2]; +} + +static dma_addr_t to_sgl_element_pair_dma(struct isci_host *ihost, + struct isci_request *ireq, u32 idx) +{ + u32 offset; + + if (idx == 0) { + offset = (void *) &ireq->tc->sgl_pair_ab - + (void *) &ihost->task_context_table[0]; + return ihost->task_context_dma + offset; + } else if (idx == 1) { + offset = (void *) &ireq->tc->sgl_pair_cd - + (void *) &ihost->task_context_table[0]; + return ihost->task_context_dma + offset; + } + + return sci_io_request_get_dma_addr(ireq, &ireq->sg_table[idx - 2]); +} + +static void init_sgl_element(struct scu_sgl_element *e, struct scatterlist *sg) +{ + e->length = sg_dma_len(sg); + e->address_upper = upper_32_bits(sg_dma_address(sg)); + e->address_lower = lower_32_bits(sg_dma_address(sg)); + e->address_modifier = 0; +} + +static void sci_request_build_sgl(struct isci_request *ireq) +{ + struct isci_host *ihost = ireq->isci_host; + struct sas_task *task = isci_request_access_task(ireq); + struct scatterlist *sg = NULL; + dma_addr_t dma_addr; + u32 sg_idx = 0; + struct scu_sgl_element_pair *scu_sg = NULL; + struct scu_sgl_element_pair *prev_sg = NULL; + + if (task->num_scatter > 0) { + sg = task->scatter; + + while (sg) { + scu_sg = to_sgl_element_pair(ireq, sg_idx); + init_sgl_element(&scu_sg->A, sg); + sg = sg_next(sg); + if (sg) { + init_sgl_element(&scu_sg->B, sg); + sg = sg_next(sg); + } else + memset(&scu_sg->B, 0, sizeof(scu_sg->B)); + + if (prev_sg) { + dma_addr = to_sgl_element_pair_dma(ihost, + ireq, + sg_idx); + + prev_sg->next_pair_upper = + upper_32_bits(dma_addr); + prev_sg->next_pair_lower = + lower_32_bits(dma_addr); + } + + prev_sg = scu_sg; + sg_idx++; + } + } else { /* handle when no sg */ + scu_sg = to_sgl_element_pair(ireq, sg_idx); + + dma_addr = dma_map_single(&ihost->pdev->dev, + task->scatter, + task->total_xfer_len, + task->data_dir); + + ireq->zero_scatter_daddr = dma_addr; + + scu_sg->A.length = task->total_xfer_len; + scu_sg->A.address_upper = upper_32_bits(dma_addr); + scu_sg->A.address_lower = lower_32_bits(dma_addr); + } + + if (scu_sg) { + scu_sg->next_pair_upper = 0; + scu_sg->next_pair_lower = 0; + } +} + +static void sci_io_request_build_ssp_command_iu(struct isci_request *ireq) +{ + struct ssp_cmd_iu *cmd_iu; + struct sas_task *task = isci_request_access_task(ireq); + + cmd_iu = &ireq->ssp.cmd; + + memcpy(cmd_iu->LUN, task->ssp_task.LUN, 8); + cmd_iu->add_cdb_len = 0; + cmd_iu->_r_a = 0; + cmd_iu->_r_b = 0; + cmd_iu->en_fburst = 0; /* unsupported */ + cmd_iu->task_prio = task->ssp_task.task_prio; + cmd_iu->task_attr = task->ssp_task.task_attr; + cmd_iu->_r_c = 0; + + sci_swab32_cpy(&cmd_iu->cdb, task->ssp_task.cdb, + sizeof(task->ssp_task.cdb) / sizeof(u32)); +} + +static void sci_task_request_build_ssp_task_iu(struct isci_request *ireq) +{ + struct ssp_task_iu *task_iu; + struct sas_task *task = isci_request_access_task(ireq); + struct isci_tmf *isci_tmf = isci_request_access_tmf(ireq); + + task_iu = &ireq->ssp.tmf; + + memset(task_iu, 0, sizeof(struct ssp_task_iu)); + + memcpy(task_iu->LUN, task->ssp_task.LUN, 8); + + task_iu->task_func = isci_tmf->tmf_code; + task_iu->task_tag = + (ireq->ttype == tmf_task) ? + isci_tmf->io_tag : + SCI_CONTROLLER_INVALID_IO_TAG; +} + +/** + * This method is will fill in the SCU Task Context for any type of SSP request. + * @sci_req: + * @task_context: + * + */ +static void scu_ssp_reqeust_construct_task_context( + struct isci_request *ireq, + struct scu_task_context *task_context) +{ + dma_addr_t dma_addr; + struct isci_remote_device *idev; + struct isci_port *iport; + + idev = ireq->target_device; + iport = idev->owning_port; + + /* Fill in the TC with the its required data */ + task_context->abort = 0; + task_context->priority = 0; + task_context->initiator_request = 1; + task_context->connection_rate = idev->connection_rate; + task_context->protocol_engine_index = ISCI_PEG; + task_context->logical_port_index = iport->physical_port_index; + task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SSP; + task_context->valid = SCU_TASK_CONTEXT_VALID; + task_context->context_type = SCU_TASK_CONTEXT_TYPE; + + task_context->remote_node_index = idev->rnc.remote_node_index; + task_context->command_code = 0; + + task_context->link_layer_control = 0; + task_context->do_not_dma_ssp_good_response = 1; + task_context->strict_ordering = 0; + task_context->control_frame = 0; + task_context->timeout_enable = 0; + task_context->block_guard_enable = 0; + + task_context->address_modifier = 0; + + /* task_context->type.ssp.tag = ireq->io_tag; */ + task_context->task_phase = 0x01; + + ireq->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + (ISCI_PEG << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (iport->physical_port_index << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | + ISCI_TAG_TCI(ireq->io_tag)); + + /* + * Copy the physical address for the command buffer to the + * SCU Task Context + */ + dma_addr = sci_io_request_get_dma_addr(ireq, &ireq->ssp.cmd); + + task_context->command_iu_upper = upper_32_bits(dma_addr); + task_context->command_iu_lower = lower_32_bits(dma_addr); + + /* + * Copy the physical address for the response buffer to the + * SCU Task Context + */ + dma_addr = sci_io_request_get_dma_addr(ireq, &ireq->ssp.rsp); + + task_context->response_iu_upper = upper_32_bits(dma_addr); + task_context->response_iu_lower = lower_32_bits(dma_addr); +} + +/** + * This method is will fill in the SCU Task Context for a SSP IO request. + * @sci_req: + * + */ +static void scu_ssp_io_request_construct_task_context(struct isci_request *ireq, + enum dma_data_direction dir, + u32 len) +{ + struct scu_task_context *task_context = ireq->tc; + + scu_ssp_reqeust_construct_task_context(ireq, task_context); + + task_context->ssp_command_iu_length = + sizeof(struct ssp_cmd_iu) / sizeof(u32); + task_context->type.ssp.frame_type = SSP_COMMAND; + + switch (dir) { + case DMA_FROM_DEVICE: + case DMA_NONE: + default: + task_context->task_type = SCU_TASK_TYPE_IOREAD; + break; + case DMA_TO_DEVICE: + task_context->task_type = SCU_TASK_TYPE_IOWRITE; + break; + } + + task_context->transfer_length_bytes = len; + + if (task_context->transfer_length_bytes > 0) + sci_request_build_sgl(ireq); +} + +/** + * This method will fill in the SCU Task Context for a SSP Task request. The + * following important settings are utilized: -# priority == + * SCU_TASK_PRIORITY_HIGH. This ensures that the task request is issued + * ahead of other task destined for the same Remote Node. -# task_type == + * SCU_TASK_TYPE_IOREAD. This simply indicates that a normal request type + * (i.e. non-raw frame) is being utilized to perform task management. -# + * control_frame == 1. This ensures that the proper endianess is set so + * that the bytes are transmitted in the right order for a task frame. + * @sci_req: This parameter specifies the task request object being + * constructed. + * + */ +static void scu_ssp_task_request_construct_task_context(struct isci_request *ireq) +{ + struct scu_task_context *task_context = ireq->tc; + + scu_ssp_reqeust_construct_task_context(ireq, task_context); + + task_context->control_frame = 1; + task_context->priority = SCU_TASK_PRIORITY_HIGH; + task_context->task_type = SCU_TASK_TYPE_RAW_FRAME; + task_context->transfer_length_bytes = 0; + task_context->type.ssp.frame_type = SSP_TASK; + task_context->ssp_command_iu_length = + sizeof(struct ssp_task_iu) / sizeof(u32); +} + +/** + * This method is will fill in the SCU Task Context for any type of SATA + * request. This is called from the various SATA constructors. + * @sci_req: The general IO request object which is to be used in + * constructing the SCU task context. + * @task_context: The buffer pointer for the SCU task context which is being + * constructed. + * + * The general io request construction is complete. The buffer assignment for + * the command buffer is complete. none Revisit task context construction to + * determine what is common for SSP/SMP/STP task context structures. + */ +static void scu_sata_reqeust_construct_task_context( + struct isci_request *ireq, + struct scu_task_context *task_context) +{ + dma_addr_t dma_addr; + struct isci_remote_device *idev; + struct isci_port *iport; + + idev = ireq->target_device; + iport = idev->owning_port; + + /* Fill in the TC with the its required data */ + task_context->abort = 0; + task_context->priority = SCU_TASK_PRIORITY_NORMAL; + task_context->initiator_request = 1; + task_context->connection_rate = idev->connection_rate; + task_context->protocol_engine_index = ISCI_PEG; + task_context->logical_port_index = iport->physical_port_index; + task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_STP; + task_context->valid = SCU_TASK_CONTEXT_VALID; + task_context->context_type = SCU_TASK_CONTEXT_TYPE; + + task_context->remote_node_index = idev->rnc.remote_node_index; + task_context->command_code = 0; + + task_context->link_layer_control = 0; + task_context->do_not_dma_ssp_good_response = 1; + task_context->strict_ordering = 0; + task_context->control_frame = 0; + task_context->timeout_enable = 0; + task_context->block_guard_enable = 0; + + task_context->address_modifier = 0; + task_context->task_phase = 0x01; + + task_context->ssp_command_iu_length = + (sizeof(struct host_to_dev_fis) - sizeof(u32)) / sizeof(u32); + + /* Set the first word of the H2D REG FIS */ + task_context->type.words[0] = *(u32 *)&ireq->stp.cmd; + + ireq->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + (ISCI_PEG << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (iport->physical_port_index << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | + ISCI_TAG_TCI(ireq->io_tag)); + /* + * Copy the physical address for the command buffer to the SCU Task + * Context. We must offset the command buffer by 4 bytes because the + * first 4 bytes are transfered in the body of the TC. + */ + dma_addr = sci_io_request_get_dma_addr(ireq, + ((char *) &ireq->stp.cmd) + + sizeof(u32)); + + task_context->command_iu_upper = upper_32_bits(dma_addr); + task_context->command_iu_lower = lower_32_bits(dma_addr); + + /* SATA Requests do not have a response buffer */ + task_context->response_iu_upper = 0; + task_context->response_iu_lower = 0; +} + +static void scu_stp_raw_request_construct_task_context(struct isci_request *ireq) +{ + struct scu_task_context *task_context = ireq->tc; + + scu_sata_reqeust_construct_task_context(ireq, task_context); + + task_context->control_frame = 0; + task_context->priority = SCU_TASK_PRIORITY_NORMAL; + task_context->task_type = SCU_TASK_TYPE_SATA_RAW_FRAME; + task_context->type.stp.fis_type = FIS_REGH2D; + task_context->transfer_length_bytes = sizeof(struct host_to_dev_fis) - sizeof(u32); +} + +static enum sci_status sci_stp_pio_request_construct(struct isci_request *ireq, + bool copy_rx_frame) +{ + struct isci_stp_request *stp_req = &ireq->stp.req; + + scu_stp_raw_request_construct_task_context(ireq); + + stp_req->status = 0; + stp_req->sgl.offset = 0; + stp_req->sgl.set = SCU_SGL_ELEMENT_PAIR_A; + + if (copy_rx_frame) { + sci_request_build_sgl(ireq); + stp_req->sgl.index = 0; + } else { + /* The user does not want the data copied to the SGL buffer location */ + stp_req->sgl.index = -1; + } + + return SCI_SUCCESS; +} + +/** + * + * @sci_req: This parameter specifies the request to be constructed as an + * optimized request. + * @optimized_task_type: This parameter specifies whether the request is to be + * an UDMA request or a NCQ request. - A value of 0 indicates UDMA. - A + * value of 1 indicates NCQ. + * + * This method will perform request construction common to all types of STP + * requests that are optimized by the silicon (i.e. UDMA, NCQ). This method + * returns an indication as to whether the construction was successful. + */ +static void sci_stp_optimized_request_construct(struct isci_request *ireq, + u8 optimized_task_type, + u32 len, + enum dma_data_direction dir) +{ + struct scu_task_context *task_context = ireq->tc; + + /* Build the STP task context structure */ + scu_sata_reqeust_construct_task_context(ireq, task_context); + + /* Copy over the SGL elements */ + sci_request_build_sgl(ireq); + + /* Copy over the number of bytes to be transfered */ + task_context->transfer_length_bytes = len; + + if (dir == DMA_TO_DEVICE) { + /* + * The difference between the DMA IN and DMA OUT request task type + * values are consistent with the difference between FPDMA READ + * and FPDMA WRITE values. Add the supplied task type parameter + * to this difference to set the task type properly for this + * DATA OUT (WRITE) case. */ + task_context->task_type = optimized_task_type + (SCU_TASK_TYPE_DMA_OUT + - SCU_TASK_TYPE_DMA_IN); + } else { + /* + * For the DATA IN (READ) case, simply save the supplied + * optimized task type. */ + task_context->task_type = optimized_task_type; + } +} + + + +static enum sci_status +sci_io_request_construct_sata(struct isci_request *ireq, + u32 len, + enum dma_data_direction dir, + bool copy) +{ + enum sci_status status = SCI_SUCCESS; + struct sas_task *task = isci_request_access_task(ireq); + + /* check for management protocols */ + if (ireq->ttype == tmf_task) { + struct isci_tmf *tmf = isci_request_access_tmf(ireq); + + if (tmf->tmf_code == isci_tmf_sata_srst_high || + tmf->tmf_code == isci_tmf_sata_srst_low) { + scu_stp_raw_request_construct_task_context(ireq); + return SCI_SUCCESS; + } else { + dev_err(&ireq->owning_controller->pdev->dev, + "%s: Request 0x%p received un-handled SAT " + "management protocol 0x%x.\n", + __func__, ireq, tmf->tmf_code); + + return SCI_FAILURE; + } + } + + if (!sas_protocol_ata(task->task_proto)) { + dev_err(&ireq->owning_controller->pdev->dev, + "%s: Non-ATA protocol in SATA path: 0x%x\n", + __func__, + task->task_proto); + return SCI_FAILURE; + + } + + /* non data */ + if (task->data_dir == DMA_NONE) { + scu_stp_raw_request_construct_task_context(ireq); + return SCI_SUCCESS; + } + + /* NCQ */ + if (task->ata_task.use_ncq) { + sci_stp_optimized_request_construct(ireq, + SCU_TASK_TYPE_FPDMAQ_READ, + len, dir); + return SCI_SUCCESS; + } + + /* DMA */ + if (task->ata_task.dma_xfer) { + sci_stp_optimized_request_construct(ireq, + SCU_TASK_TYPE_DMA_IN, + len, dir); + return SCI_SUCCESS; + } else /* PIO */ + return sci_stp_pio_request_construct(ireq, copy); + + return status; +} + +static enum sci_status sci_io_request_construct_basic_ssp(struct isci_request *ireq) +{ + struct sas_task *task = isci_request_access_task(ireq); + + ireq->protocol = SCIC_SSP_PROTOCOL; + + scu_ssp_io_request_construct_task_context(ireq, + task->data_dir, + task->total_xfer_len); + + sci_io_request_build_ssp_command_iu(ireq); + + sci_change_state(&ireq->sm, SCI_REQ_CONSTRUCTED); + + return SCI_SUCCESS; +} + +enum sci_status sci_task_request_construct_ssp( + struct isci_request *ireq) +{ + /* Construct the SSP Task SCU Task Context */ + scu_ssp_task_request_construct_task_context(ireq); + + /* Fill in the SSP Task IU */ + sci_task_request_build_ssp_task_iu(ireq); + + sci_change_state(&ireq->sm, SCI_REQ_CONSTRUCTED); + + return SCI_SUCCESS; +} + +static enum sci_status sci_io_request_construct_basic_sata(struct isci_request *ireq) +{ + enum sci_status status; + bool copy = false; + struct sas_task *task = isci_request_access_task(ireq); + + ireq->protocol = SCIC_STP_PROTOCOL; + + copy = (task->data_dir == DMA_NONE) ? false : true; + + status = sci_io_request_construct_sata(ireq, + task->total_xfer_len, + task->data_dir, + copy); + + if (status == SCI_SUCCESS) + sci_change_state(&ireq->sm, SCI_REQ_CONSTRUCTED); + + return status; +} + +enum sci_status sci_task_request_construct_sata(struct isci_request *ireq) +{ + enum sci_status status = SCI_SUCCESS; + + /* check for management protocols */ + if (ireq->ttype == tmf_task) { + struct isci_tmf *tmf = isci_request_access_tmf(ireq); + + if (tmf->tmf_code == isci_tmf_sata_srst_high || + tmf->tmf_code == isci_tmf_sata_srst_low) { + scu_stp_raw_request_construct_task_context(ireq); + } else { + dev_err(&ireq->owning_controller->pdev->dev, + "%s: Request 0x%p received un-handled SAT " + "Protocol 0x%x.\n", + __func__, ireq, tmf->tmf_code); + + return SCI_FAILURE; + } + } + + if (status != SCI_SUCCESS) + return status; + sci_change_state(&ireq->sm, SCI_REQ_CONSTRUCTED); + + return status; +} + +/** + * sci_req_tx_bytes - bytes transferred when reply underruns request + * @sci_req: request that was terminated early + */ +#define SCU_TASK_CONTEXT_SRAM 0x200000 +static u32 sci_req_tx_bytes(struct isci_request *ireq) +{ + struct isci_host *ihost = ireq->owning_controller; + u32 ret_val = 0; + + if (readl(&ihost->smu_registers->address_modifier) == 0) { + void __iomem *scu_reg_base = ihost->scu_registers; + + /* get the bytes of data from the Address == BAR1 + 20002Ch + (256*TCi) where + * BAR1 is the scu_registers + * 0x20002C = 0x200000 + 0x2c + * = start of task context SRAM + offset of (type.ssp.data_offset) + * TCi is the io_tag of struct sci_request + */ + ret_val = readl(scu_reg_base + + (SCU_TASK_CONTEXT_SRAM + offsetof(struct scu_task_context, type.ssp.data_offset)) + + ((sizeof(struct scu_task_context)) * ISCI_TAG_TCI(ireq->io_tag))); + } + + return ret_val; +} + +enum sci_status sci_request_start(struct isci_request *ireq) +{ + enum sci_base_request_states state; + struct scu_task_context *tc = ireq->tc; + struct isci_host *ihost = ireq->owning_controller; + + state = ireq->sm.current_state_id; + if (state != SCI_REQ_CONSTRUCTED) { + dev_warn(&ihost->pdev->dev, + "%s: SCIC IO Request requested to start while in wrong " + "state %d\n", __func__, state); + return SCI_FAILURE_INVALID_STATE; + } + + tc->task_index = ISCI_TAG_TCI(ireq->io_tag); + + switch (tc->protocol_type) { + case SCU_TASK_CONTEXT_PROTOCOL_SMP: + case SCU_TASK_CONTEXT_PROTOCOL_SSP: + /* SSP/SMP Frame */ + tc->type.ssp.tag = ireq->io_tag; + tc->type.ssp.target_port_transfer_tag = 0xFFFF; + break; + + case SCU_TASK_CONTEXT_PROTOCOL_STP: + /* STP/SATA Frame + * tc->type.stp.ncq_tag = ireq->ncq_tag; + */ + break; + + case SCU_TASK_CONTEXT_PROTOCOL_NONE: + /* / @todo When do we set no protocol type? */ + break; + + default: + /* This should never happen since we build the IO + * requests */ + break; + } + + /* Add to the post_context the io tag value */ + ireq->post_context |= ISCI_TAG_TCI(ireq->io_tag); + + /* Everything is good go ahead and change state */ + sci_change_state(&ireq->sm, SCI_REQ_STARTED); + + return SCI_SUCCESS; +} + +enum sci_status +sci_io_request_terminate(struct isci_request *ireq) +{ + enum sci_base_request_states state; + + state = ireq->sm.current_state_id; + + switch (state) { + case SCI_REQ_CONSTRUCTED: + ireq->scu_status = SCU_TASK_DONE_TASK_ABORT; + ireq->sci_status = SCI_FAILURE_IO_TERMINATED; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + return SCI_SUCCESS; + case SCI_REQ_STARTED: + case SCI_REQ_TASK_WAIT_TC_COMP: + case SCI_REQ_SMP_WAIT_RESP: + case SCI_REQ_SMP_WAIT_TC_COMP: + case SCI_REQ_STP_UDMA_WAIT_TC_COMP: + case SCI_REQ_STP_UDMA_WAIT_D2H: + case SCI_REQ_STP_NON_DATA_WAIT_H2D: + case SCI_REQ_STP_NON_DATA_WAIT_D2H: + case SCI_REQ_STP_PIO_WAIT_H2D: + case SCI_REQ_STP_PIO_WAIT_FRAME: + case SCI_REQ_STP_PIO_DATA_IN: + case SCI_REQ_STP_PIO_DATA_OUT: + case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED: + case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG: + case SCI_REQ_STP_SOFT_RESET_WAIT_D2H: + sci_change_state(&ireq->sm, SCI_REQ_ABORTING); + return SCI_SUCCESS; + case SCI_REQ_TASK_WAIT_TC_RESP: + sci_change_state(&ireq->sm, SCI_REQ_ABORTING); + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + return SCI_SUCCESS; + case SCI_REQ_ABORTING: + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + return SCI_SUCCESS; + case SCI_REQ_COMPLETED: + default: + dev_warn(&ireq->owning_controller->pdev->dev, + "%s: SCIC IO Request requested to abort while in wrong " + "state %d\n", + __func__, + ireq->sm.current_state_id); + break; + } + + return SCI_FAILURE_INVALID_STATE; +} + +enum sci_status sci_request_complete(struct isci_request *ireq) +{ + enum sci_base_request_states state; + struct isci_host *ihost = ireq->owning_controller; + + state = ireq->sm.current_state_id; + if (WARN_ONCE(state != SCI_REQ_COMPLETED, + "isci: request completion from wrong state (%d)\n", state)) + return SCI_FAILURE_INVALID_STATE; + + if (ireq->saved_rx_frame_index != SCU_INVALID_FRAME_INDEX) + sci_controller_release_frame(ihost, + ireq->saved_rx_frame_index); + + /* XXX can we just stop the machine and remove the 'final' state? */ + sci_change_state(&ireq->sm, SCI_REQ_FINAL); + return SCI_SUCCESS; +} + +enum sci_status sci_io_request_event_handler(struct isci_request *ireq, + u32 event_code) +{ + enum sci_base_request_states state; + struct isci_host *ihost = ireq->owning_controller; + + state = ireq->sm.current_state_id; + + if (state != SCI_REQ_STP_PIO_DATA_IN) { + dev_warn(&ihost->pdev->dev, "%s: (%x) in wrong state %d\n", + __func__, event_code, state); + + return SCI_FAILURE_INVALID_STATE; + } + + switch (scu_get_event_specifier(event_code)) { + case SCU_TASK_DONE_CRC_ERR << SCU_EVENT_SPECIFIC_CODE_SHIFT: + /* We are waiting for data and the SCU has R_ERR the data frame. + * Go back to waiting for the D2H Register FIS + */ + sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_WAIT_FRAME); + return SCI_SUCCESS; + default: + dev_err(&ihost->pdev->dev, + "%s: pio request unexpected event %#x\n", + __func__, event_code); + + /* TODO Should we fail the PIO request when we get an + * unexpected event? + */ + return SCI_FAILURE; + } +} + +/* + * This function copies response data for requests returning response data + * instead of sense data. + * @sci_req: This parameter specifies the request object for which to copy + * the response data. + */ +static void sci_io_request_copy_response(struct isci_request *ireq) +{ + void *resp_buf; + u32 len; + struct ssp_response_iu *ssp_response; + struct isci_tmf *isci_tmf = isci_request_access_tmf(ireq); + + ssp_response = &ireq->ssp.rsp; + + resp_buf = &isci_tmf->resp.resp_iu; + + len = min_t(u32, + SSP_RESP_IU_MAX_SIZE, + be32_to_cpu(ssp_response->response_data_len)); + + memcpy(resp_buf, ssp_response->resp_data, len); +} + +static enum sci_status +request_started_state_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + struct ssp_response_iu *resp_iu; + u8 datapres; + + /* TODO: Any SDMA return code of other than 0 is bad decode 0x003C0000 + * to determine SDMA status + */ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + break; + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_EARLY_RESP): { + /* There are times when the SCU hardware will return an early + * response because the io request specified more data than is + * returned by the target device (mode pages, inquiry data, + * etc.). We must check the response stats to see if this is + * truly a failed request or a good request that just got + * completed early. + */ + struct ssp_response_iu *resp = &ireq->ssp.rsp; + ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32); + + sci_swab32_cpy(&ireq->ssp.rsp, + &ireq->ssp.rsp, + word_cnt); + + if (resp->status == 0) { + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS_IO_DONE_EARLY; + } else { + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; + } + break; + } + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CHECK_RESPONSE): { + ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32); + + sci_swab32_cpy(&ireq->ssp.rsp, + &ireq->ssp.rsp, + word_cnt); + + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; + break; + } + + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_RESP_LEN_ERR): + /* TODO With TASK_DONE_RESP_LEN_ERR is the response frame + * guaranteed to be received before this completion status is + * posted? + */ + resp_iu = &ireq->ssp.rsp; + datapres = resp_iu->datapres; + + if (datapres == 1 || datapres == 2) { + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; + } else { + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + } + break; + /* only stp device gets suspended. */ + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_ACK_NAK_TO): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_PERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_NAK_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_DATA_LEN_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_ABORT_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_XR_WD_LEN): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_MAX_PLD_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_RESP): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_SDBFIS): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SDB_ERR): + if (ireq->protocol == SCIC_STP_PROTOCOL) { + ireq->scu_status = SCU_GET_COMPLETION_TL_STATUS(completion_code) >> + SCU_COMPLETION_TL_STATUS_SHIFT; + ireq->sci_status = SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; + } else { + ireq->scu_status = SCU_GET_COMPLETION_TL_STATUS(completion_code) >> + SCU_COMPLETION_TL_STATUS_SHIFT; + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + } + break; + + /* both stp/ssp device gets suspended */ + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LF_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_WRONG_DESTINATION): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_3): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_BAD_DESTINATION): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_ZONE_VIOLATION): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED): + ireq->scu_status = SCU_GET_COMPLETION_TL_STATUS(completion_code) >> + SCU_COMPLETION_TL_STATUS_SHIFT; + ireq->sci_status = SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED; + break; + + /* neither ssp nor stp gets suspended. */ + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_NAK_CMD_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_XR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_XR_IU_LEN_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SDMA_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_OFFSET_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_EXCESS_DATA): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_RESP_TO_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_UFI_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_FRM_TYPE_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_LL_RX_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_DATA): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_OPEN_FAIL): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_VIIT_ENTRY_NV): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_IIT_ENTRY_NV): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_RNCNV_OUTBOUND): + default: + ireq->scu_status = SCU_GET_COMPLETION_TL_STATUS(completion_code) >> + SCU_COMPLETION_TL_STATUS_SHIFT; + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + break; + } + + /* + * TODO: This is probably wrong for ACK/NAK timeout conditions + */ + + /* In all cases we will treat this as the completion of the IO req. */ + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + return SCI_SUCCESS; +} + +static enum sci_status +request_aborting_state_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case (SCU_TASK_DONE_GOOD << SCU_COMPLETION_TL_STATUS_SHIFT): + case (SCU_TASK_DONE_TASK_ABORT << SCU_COMPLETION_TL_STATUS_SHIFT): + ireq->scu_status = SCU_TASK_DONE_TASK_ABORT; + ireq->sci_status = SCI_FAILURE_IO_TERMINATED; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + + default: + /* Unless we get some strange error wait for the task abort to complete + * TODO: Should there be a state change for this completion? + */ + break; + } + + return SCI_SUCCESS; +} + +static enum sci_status ssp_task_request_await_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + sci_change_state(&ireq->sm, SCI_REQ_TASK_WAIT_TC_RESP); + break; + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_ACK_NAK_TO): + /* Currently, the decision is to simply allow the task request + * to timeout if the task IU wasn't received successfully. + * There is a potential for receiving multiple task responses if + * we decide to send the task IU again. + */ + dev_warn(&ireq->owning_controller->pdev->dev, + "%s: TaskRequest:0x%p CompletionCode:%x - " + "ACK/NAK timeout\n", __func__, ireq, + completion_code); + + sci_change_state(&ireq->sm, SCI_REQ_TASK_WAIT_TC_RESP); + break; + default: + /* + * All other completion status cause the IO to be complete. + * If a NAK was received, then it is up to the user to retry + * the request. + */ + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + } + + return SCI_SUCCESS; +} + +static enum sci_status +smp_request_await_response_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + /* In the AWAIT RESPONSE state, any TC completion is + * unexpected. but if the TC has success status, we + * complete the IO anyway. + */ + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_RESP_TO_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_UFI_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_FRM_TYPE_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_LL_RX_ERR): + /* These status has been seen in a specific LSI + * expander, which sometimes is not able to send smp + * response within 2 ms. This causes our hardware break + * the connection and set TC completion with one of + * these SMP_XXX_XX_ERR status. For these type of error, + * we ask ihost user to retry the request. + */ + ireq->scu_status = SCU_TASK_DONE_SMP_RESP_TO_ERR; + ireq->sci_status = SCI_FAILURE_RETRY_REQUIRED; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + default: + /* All other completion status cause the IO to be complete. If a NAK + * was received, then it is up to the user to retry the request + */ + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + } + + return SCI_SUCCESS; +} + +static enum sci_status +smp_request_await_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + default: + /* All other completion status cause the IO to be + * complete. If a NAK was received, then it is up to + * the user to retry the request. + */ + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + } + + return SCI_SUCCESS; +} + +static struct scu_sgl_element *pio_sgl_next(struct isci_stp_request *stp_req) +{ + struct scu_sgl_element *sgl; + struct scu_sgl_element_pair *sgl_pair; + struct isci_request *ireq = to_ireq(stp_req); + struct isci_stp_pio_sgl *pio_sgl = &stp_req->sgl; + + sgl_pair = to_sgl_element_pair(ireq, pio_sgl->index); + if (!sgl_pair) + sgl = NULL; + else if (pio_sgl->set == SCU_SGL_ELEMENT_PAIR_A) { + if (sgl_pair->B.address_lower == 0 && + sgl_pair->B.address_upper == 0) { + sgl = NULL; + } else { + pio_sgl->set = SCU_SGL_ELEMENT_PAIR_B; + sgl = &sgl_pair->B; + } + } else { + if (sgl_pair->next_pair_lower == 0 && + sgl_pair->next_pair_upper == 0) { + sgl = NULL; + } else { + pio_sgl->index++; + pio_sgl->set = SCU_SGL_ELEMENT_PAIR_A; + sgl_pair = to_sgl_element_pair(ireq, pio_sgl->index); + sgl = &sgl_pair->A; + } + } + + return sgl; +} + +static enum sci_status +stp_request_non_data_await_h2d_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + sci_change_state(&ireq->sm, SCI_REQ_STP_NON_DATA_WAIT_D2H); + break; + + default: + /* All other completion status cause the IO to be + * complete. If a NAK was received, then it is up to + * the user to retry the request. + */ + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + } + + return SCI_SUCCESS; +} + +#define SCU_MAX_FRAME_BUFFER_SIZE 0x400 /* 1K is the maximum SCU frame data payload */ + +/* transmit DATA_FIS from (current sgl + offset) for input + * parameter length. current sgl and offset is alreay stored in the IO request + */ +static enum sci_status sci_stp_request_pio_data_out_trasmit_data_frame( + struct isci_request *ireq, + u32 length) +{ + struct isci_stp_request *stp_req = &ireq->stp.req; + struct scu_task_context *task_context = ireq->tc; + struct scu_sgl_element_pair *sgl_pair; + struct scu_sgl_element *current_sgl; + + /* Recycle the TC and reconstruct it for sending out DATA FIS containing + * for the data from current_sgl+offset for the input length + */ + sgl_pair = to_sgl_element_pair(ireq, stp_req->sgl.index); + if (stp_req->sgl.set == SCU_SGL_ELEMENT_PAIR_A) + current_sgl = &sgl_pair->A; + else + current_sgl = &sgl_pair->B; + + /* update the TC */ + task_context->command_iu_upper = current_sgl->address_upper; + task_context->command_iu_lower = current_sgl->address_lower; + task_context->transfer_length_bytes = length; + task_context->type.stp.fis_type = FIS_DATA; + + /* send the new TC out. */ + return sci_controller_continue_io(ireq); +} + +static enum sci_status sci_stp_request_pio_data_out_transmit_data(struct isci_request *ireq) +{ + struct isci_stp_request *stp_req = &ireq->stp.req; + struct scu_sgl_element_pair *sgl_pair; + struct scu_sgl_element *sgl; + enum sci_status status; + u32 offset; + u32 len = 0; + + offset = stp_req->sgl.offset; + sgl_pair = to_sgl_element_pair(ireq, stp_req->sgl.index); + if (WARN_ONCE(!sgl_pair, "%s: null sgl element", __func__)) + return SCI_FAILURE; + + if (stp_req->sgl.set == SCU_SGL_ELEMENT_PAIR_A) { + sgl = &sgl_pair->A; + len = sgl_pair->A.length - offset; + } else { + sgl = &sgl_pair->B; + len = sgl_pair->B.length - offset; + } + + if (stp_req->pio_len == 0) + return SCI_SUCCESS; + + if (stp_req->pio_len >= len) { + status = sci_stp_request_pio_data_out_trasmit_data_frame(ireq, len); + if (status != SCI_SUCCESS) + return status; + stp_req->pio_len -= len; + + /* update the current sgl, offset and save for future */ + sgl = pio_sgl_next(stp_req); + offset = 0; + } else if (stp_req->pio_len < len) { + sci_stp_request_pio_data_out_trasmit_data_frame(ireq, stp_req->pio_len); + + /* Sgl offset will be adjusted and saved for future */ + offset += stp_req->pio_len; + sgl->address_lower += stp_req->pio_len; + stp_req->pio_len = 0; + } + + stp_req->sgl.offset = offset; + + return status; +} + +/** + * + * @stp_request: The request that is used for the SGL processing. + * @data_buffer: The buffer of data to be copied. + * @length: The length of the data transfer. + * + * Copy the data from the buffer for the length specified to the IO reqeust SGL + * specified data region. enum sci_status + */ +static enum sci_status +sci_stp_request_pio_data_in_copy_data_buffer(struct isci_stp_request *stp_req, + u8 *data_buf, u32 len) +{ + struct isci_request *ireq; + u8 *src_addr; + int copy_len; + struct sas_task *task; + struct scatterlist *sg; + void *kaddr; + int total_len = len; + + ireq = to_ireq(stp_req); + task = isci_request_access_task(ireq); + src_addr = data_buf; + + if (task->num_scatter > 0) { + sg = task->scatter; + + while (total_len > 0) { + struct page *page = sg_page(sg); + + copy_len = min_t(int, total_len, sg_dma_len(sg)); + kaddr = kmap_atomic(page, KM_IRQ0); + memcpy(kaddr + sg->offset, src_addr, copy_len); + kunmap_atomic(kaddr, KM_IRQ0); + total_len -= copy_len; + src_addr += copy_len; + sg = sg_next(sg); + } + } else { + BUG_ON(task->total_xfer_len < total_len); + memcpy(task->scatter, src_addr, total_len); + } + + return SCI_SUCCESS; +} + +/** + * + * @sci_req: The PIO DATA IN request that is to receive the data. + * @data_buffer: The buffer to copy from. + * + * Copy the data buffer to the io request data region. enum sci_status + */ +static enum sci_status sci_stp_request_pio_data_in_copy_data( + struct isci_stp_request *stp_req, + u8 *data_buffer) +{ + enum sci_status status; + + /* + * If there is less than 1K remaining in the transfer request + * copy just the data for the transfer */ + if (stp_req->pio_len < SCU_MAX_FRAME_BUFFER_SIZE) { + status = sci_stp_request_pio_data_in_copy_data_buffer( + stp_req, data_buffer, stp_req->pio_len); + + if (status == SCI_SUCCESS) + stp_req->pio_len = 0; + } else { + /* We are transfering the whole frame so copy */ + status = sci_stp_request_pio_data_in_copy_data_buffer( + stp_req, data_buffer, SCU_MAX_FRAME_BUFFER_SIZE); + + if (status == SCI_SUCCESS) + stp_req->pio_len -= SCU_MAX_FRAME_BUFFER_SIZE; + } + + return status; +} + +static enum sci_status +stp_request_pio_await_h2d_completion_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + enum sci_status status = SCI_SUCCESS; + + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_WAIT_FRAME); + break; + + default: + /* All other completion status cause the IO to be + * complete. If a NAK was received, then it is up to + * the user to retry the request. + */ + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + } + + return status; +} + +static enum sci_status +pio_data_out_tx_done_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + enum sci_status status = SCI_SUCCESS; + bool all_frames_transferred = false; + struct isci_stp_request *stp_req = &ireq->stp.req; + + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + /* Transmit data */ + if (stp_req->pio_len != 0) { + status = sci_stp_request_pio_data_out_transmit_data(ireq); + if (status == SCI_SUCCESS) { + if (stp_req->pio_len == 0) + all_frames_transferred = true; + } + } else if (stp_req->pio_len == 0) { + /* + * this will happen if the all data is written at the + * first time after the pio setup fis is received + */ + all_frames_transferred = true; + } + + /* all data transferred. */ + if (all_frames_transferred) { + /* + * Change the state to SCI_REQ_STP_PIO_DATA_IN + * and wait for PIO_SETUP fis / or D2H REg fis. */ + sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_WAIT_FRAME); + } + break; + + default: + /* + * All other completion status cause the IO to be complete. + * If a NAK was received, then it is up to the user to retry + * the request. + */ + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + } + + return status; +} + +static enum sci_status sci_stp_request_udma_general_frame_handler(struct isci_request *ireq, + u32 frame_index) +{ + struct isci_host *ihost = ireq->owning_controller; + struct dev_to_host_fis *frame_header; + enum sci_status status; + u32 *frame_buffer; + + status = sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + (void **)&frame_header); + + if ((status == SCI_SUCCESS) && + (frame_header->fis_type == FIS_REGD2H)) { + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, + frame_index, + (void **)&frame_buffer); + + sci_controller_copy_sata_response(&ireq->stp.rsp, + frame_header, + frame_buffer); + } + + sci_controller_release_frame(ihost, frame_index); + + return status; +} + +enum sci_status +sci_io_request_frame_handler(struct isci_request *ireq, + u32 frame_index) +{ + struct isci_host *ihost = ireq->owning_controller; + struct isci_stp_request *stp_req = &ireq->stp.req; + enum sci_base_request_states state; + enum sci_status status; + ssize_t word_cnt; + + state = ireq->sm.current_state_id; + switch (state) { + case SCI_REQ_STARTED: { + struct ssp_frame_hdr ssp_hdr; + void *frame_header; + + sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + &frame_header); + + word_cnt = sizeof(struct ssp_frame_hdr) / sizeof(u32); + sci_swab32_cpy(&ssp_hdr, frame_header, word_cnt); + + if (ssp_hdr.frame_type == SSP_RESPONSE) { + struct ssp_response_iu *resp_iu; + ssize_t word_cnt = SSP_RESP_IU_MAX_SIZE / sizeof(u32); + + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, + frame_index, + (void **)&resp_iu); + + sci_swab32_cpy(&ireq->ssp.rsp, resp_iu, word_cnt); + + resp_iu = &ireq->ssp.rsp; + + if (resp_iu->datapres == 0x01 || + resp_iu->datapres == 0x02) { + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + } else { + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + } + } else { + /* not a response frame, why did it get forwarded? */ + dev_err(&ihost->pdev->dev, + "%s: SCIC IO Request 0x%p received unexpected " + "frame %d type 0x%02x\n", __func__, ireq, + frame_index, ssp_hdr.frame_type); + } + + /* + * In any case we are done with this frame buffer return it to + * the controller + */ + sci_controller_release_frame(ihost, frame_index); + + return SCI_SUCCESS; + } + + case SCI_REQ_TASK_WAIT_TC_RESP: + sci_io_request_copy_response(ireq); + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + sci_controller_release_frame(ihost, frame_index); + return SCI_SUCCESS; + + case SCI_REQ_SMP_WAIT_RESP: { + struct smp_resp *rsp_hdr = &ireq->smp.rsp; + void *frame_header; + + sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + &frame_header); + + /* byte swap the header. */ + word_cnt = SMP_RESP_HDR_SZ / sizeof(u32); + sci_swab32_cpy(rsp_hdr, frame_header, word_cnt); + + if (rsp_hdr->frame_type == SMP_RESPONSE) { + void *smp_resp; + + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, + frame_index, + &smp_resp); + + word_cnt = (sizeof(struct smp_resp) - SMP_RESP_HDR_SZ) / + sizeof(u32); + + sci_swab32_cpy(((u8 *) rsp_hdr) + SMP_RESP_HDR_SZ, + smp_resp, word_cnt); + + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + sci_change_state(&ireq->sm, SCI_REQ_SMP_WAIT_TC_COMP); + } else { + /* + * This was not a response frame why did it get + * forwarded? + */ + dev_err(&ihost->pdev->dev, + "%s: SCIC SMP Request 0x%p received unexpected " + "frame %d type 0x%02x\n", + __func__, + ireq, + frame_index, + rsp_hdr->frame_type); + + ireq->scu_status = SCU_TASK_DONE_SMP_FRM_TYPE_ERR; + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + } + + sci_controller_release_frame(ihost, frame_index); + + return SCI_SUCCESS; + } + + case SCI_REQ_STP_UDMA_WAIT_TC_COMP: + return sci_stp_request_udma_general_frame_handler(ireq, + frame_index); + + case SCI_REQ_STP_UDMA_WAIT_D2H: + /* Use the general frame handler to copy the resposne data */ + status = sci_stp_request_udma_general_frame_handler(ireq, frame_index); + + if (status != SCI_SUCCESS) + return status; + + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + return SCI_SUCCESS; + + case SCI_REQ_STP_NON_DATA_WAIT_D2H: { + struct dev_to_host_fis *frame_header; + u32 *frame_buffer; + + status = sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + (void **)&frame_header); + + if (status != SCI_SUCCESS) { + dev_err(&ihost->pdev->dev, + "%s: SCIC IO Request 0x%p could not get frame " + "header for frame index %d, status %x\n", + __func__, + stp_req, + frame_index, + status); + + return status; + } + + switch (frame_header->fis_type) { + case FIS_REGD2H: + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, + frame_index, + (void **)&frame_buffer); + + sci_controller_copy_sata_response(&ireq->stp.rsp, + frame_header, + frame_buffer); + + /* The command has completed with error */ + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; + break; + + default: + dev_warn(&ihost->pdev->dev, + "%s: IO Request:0x%p Frame Id:%d protocol " + "violation occurred\n", __func__, stp_req, + frame_index); + + ireq->scu_status = SCU_TASK_DONE_UNEXP_FIS; + ireq->sci_status = SCI_FAILURE_PROTOCOL_VIOLATION; + break; + } + + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + + /* Frame has been decoded return it to the controller */ + sci_controller_release_frame(ihost, frame_index); + + return status; + } + + case SCI_REQ_STP_PIO_WAIT_FRAME: { + struct sas_task *task = isci_request_access_task(ireq); + struct dev_to_host_fis *frame_header; + u32 *frame_buffer; + + status = sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + (void **)&frame_header); + + if (status != SCI_SUCCESS) { + dev_err(&ihost->pdev->dev, + "%s: SCIC IO Request 0x%p could not get frame " + "header for frame index %d, status %x\n", + __func__, stp_req, frame_index, status); + return status; + } + + switch (frame_header->fis_type) { + case FIS_PIO_SETUP: + /* Get from the frame buffer the PIO Setup Data */ + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, + frame_index, + (void **)&frame_buffer); + + /* Get the data from the PIO Setup The SCU Hardware + * returns first word in the frame_header and the rest + * of the data is in the frame buffer so we need to + * back up one dword + */ + + /* transfer_count: first 16bits in the 4th dword */ + stp_req->pio_len = frame_buffer[3] & 0xffff; + + /* status: 4th byte in the 3rd dword */ + stp_req->status = (frame_buffer[2] >> 24) & 0xff; + + sci_controller_copy_sata_response(&ireq->stp.rsp, + frame_header, + frame_buffer); + + ireq->stp.rsp.status = stp_req->status; + + /* The next state is dependent on whether the + * request was PIO Data-in or Data out + */ + if (task->data_dir == DMA_FROM_DEVICE) { + sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_DATA_IN); + } else if (task->data_dir == DMA_TO_DEVICE) { + /* Transmit data */ + status = sci_stp_request_pio_data_out_transmit_data(ireq); + if (status != SCI_SUCCESS) + break; + sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_DATA_OUT); + } + break; + + case FIS_SETDEVBITS: + sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_WAIT_FRAME); + break; + + case FIS_REGD2H: + if (frame_header->status & ATA_BUSY) { + /* + * Now why is the drive sending a D2H Register + * FIS when it is still busy? Do nothing since + * we are still in the right state. + */ + dev_dbg(&ihost->pdev->dev, + "%s: SCIC PIO Request 0x%p received " + "D2H Register FIS with BSY status " + "0x%x\n", + __func__, + stp_req, + frame_header->status); + break; + } + + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, + frame_index, + (void **)&frame_buffer); + + sci_controller_copy_sata_response(&ireq->stp.req, + frame_header, + frame_buffer); + + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + + default: + /* FIXME: what do we do here? */ + break; + } + + /* Frame is decoded return it to the controller */ + sci_controller_release_frame(ihost, frame_index); + + return status; + } + + case SCI_REQ_STP_PIO_DATA_IN: { + struct dev_to_host_fis *frame_header; + struct sata_fis_data *frame_buffer; + + status = sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + (void **)&frame_header); + + if (status != SCI_SUCCESS) { + dev_err(&ihost->pdev->dev, + "%s: SCIC IO Request 0x%p could not get frame " + "header for frame index %d, status %x\n", + __func__, + stp_req, + frame_index, + status); + return status; + } + + if (frame_header->fis_type != FIS_DATA) { + dev_err(&ihost->pdev->dev, + "%s: SCIC PIO Request 0x%p received frame %d " + "with fis type 0x%02x when expecting a data " + "fis.\n", + __func__, + stp_req, + frame_index, + frame_header->fis_type); + + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_FAILURE_IO_REQUIRES_SCSI_ABORT; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + + /* Frame is decoded return it to the controller */ + sci_controller_release_frame(ihost, frame_index); + return status; + } + + if (stp_req->sgl.index < 0) { + ireq->saved_rx_frame_index = frame_index; + stp_req->pio_len = 0; + } else { + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, + frame_index, + (void **)&frame_buffer); + + status = sci_stp_request_pio_data_in_copy_data(stp_req, + (u8 *)frame_buffer); + + /* Frame is decoded return it to the controller */ + sci_controller_release_frame(ihost, frame_index); + } + + /* Check for the end of the transfer, are there more + * bytes remaining for this data transfer + */ + if (status != SCI_SUCCESS || stp_req->pio_len != 0) + return status; + + if ((stp_req->status & ATA_BUSY) == 0) { + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + } else { + sci_change_state(&ireq->sm, SCI_REQ_STP_PIO_WAIT_FRAME); + } + return status; + } + + case SCI_REQ_STP_SOFT_RESET_WAIT_D2H: { + struct dev_to_host_fis *frame_header; + u32 *frame_buffer; + + status = sci_unsolicited_frame_control_get_header(&ihost->uf_control, + frame_index, + (void **)&frame_header); + if (status != SCI_SUCCESS) { + dev_err(&ihost->pdev->dev, + "%s: SCIC IO Request 0x%p could not get frame " + "header for frame index %d, status %x\n", + __func__, + stp_req, + frame_index, + status); + return status; + } + + switch (frame_header->fis_type) { + case FIS_REGD2H: + sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, + frame_index, + (void **)&frame_buffer); + + sci_controller_copy_sata_response(&ireq->stp.rsp, + frame_header, + frame_buffer); + + /* The command has completed with error */ + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; + break; + + default: + dev_warn(&ihost->pdev->dev, + "%s: IO Request:0x%p Frame Id:%d protocol " + "violation occurred\n", + __func__, + stp_req, + frame_index); + + ireq->scu_status = SCU_TASK_DONE_UNEXP_FIS; + ireq->sci_status = SCI_FAILURE_PROTOCOL_VIOLATION; + break; + } + + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + + /* Frame has been decoded return it to the controller */ + sci_controller_release_frame(ihost, frame_index); + + return status; + } + case SCI_REQ_ABORTING: + /* + * TODO: Is it even possible to get an unsolicited frame in the + * aborting state? + */ + sci_controller_release_frame(ihost, frame_index); + return SCI_SUCCESS; + + default: + dev_warn(&ihost->pdev->dev, + "%s: SCIC IO Request given unexpected frame %x while " + "in state %d\n", + __func__, + frame_index, + state); + + sci_controller_release_frame(ihost, frame_index); + return SCI_FAILURE_INVALID_STATE; + } +} + +static enum sci_status stp_request_udma_await_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + enum sci_status status = SCI_SUCCESS; + + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_FIS): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR): + /* We must check ther response buffer to see if the D2H + * Register FIS was received before we got the TC + * completion. + */ + if (ireq->stp.rsp.fis_type == FIS_REGD2H) { + sci_remote_device_suspend(ireq->target_device, + SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code))); + + ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; + ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + } else { + /* If we have an error completion status for the + * TC then we can expect a D2H register FIS from + * the device so we must change state to wait + * for it + */ + sci_change_state(&ireq->sm, SCI_REQ_STP_UDMA_WAIT_D2H); + } + break; + + /* TODO Check to see if any of these completion status need to + * wait for the device to host register fis. + */ + /* TODO We can retry the command for SCU_TASK_DONE_CMD_LL_R_ERR + * - this comes only for B0 + */ + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_INV_FIS_LEN): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_MAX_PLD_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_R_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CMD_LL_R_ERR): + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CRC_ERR): + sci_remote_device_suspend(ireq->target_device, + SCU_EVENT_SPECIFIC(SCU_NORMALIZE_COMPLETION_STATUS(completion_code))); + /* Fall through to the default case */ + default: + /* All other completion status cause the IO to be complete. */ + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + } + + return status; +} + +static enum sci_status +stp_request_soft_reset_await_h2d_asserted_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + sci_change_state(&ireq->sm, SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG); + break; + + default: + /* + * All other completion status cause the IO to be complete. + * If a NAK was received, then it is up to the user to retry + * the request. + */ + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + } + + return SCI_SUCCESS; +} + +static enum sci_status +stp_request_soft_reset_await_h2d_diagnostic_tc_event(struct isci_request *ireq, + u32 completion_code) +{ + switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { + case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): + ireq->scu_status = SCU_TASK_DONE_GOOD; + ireq->sci_status = SCI_SUCCESS; + sci_change_state(&ireq->sm, SCI_REQ_STP_SOFT_RESET_WAIT_D2H); + break; + + default: + /* All other completion status cause the IO to be complete. If + * a NAK was received, then it is up to the user to retry the + * request. + */ + ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); + ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; + sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); + break; + } + + return SCI_SUCCESS; +} + +enum sci_status +sci_io_request_tc_completion(struct isci_request *ireq, + u32 completion_code) +{ + enum sci_base_request_states state; + struct isci_host *ihost = ireq->owning_controller; + + state = ireq->sm.current_state_id; + + switch (state) { + case SCI_REQ_STARTED: + return request_started_state_tc_event(ireq, completion_code); + + case SCI_REQ_TASK_WAIT_TC_COMP: + return ssp_task_request_await_tc_event(ireq, + completion_code); + + case SCI_REQ_SMP_WAIT_RESP: + return smp_request_await_response_tc_event(ireq, + completion_code); + + case SCI_REQ_SMP_WAIT_TC_COMP: + return smp_request_await_tc_event(ireq, completion_code); + + case SCI_REQ_STP_UDMA_WAIT_TC_COMP: + return stp_request_udma_await_tc_event(ireq, + completion_code); + + case SCI_REQ_STP_NON_DATA_WAIT_H2D: + return stp_request_non_data_await_h2d_tc_event(ireq, + completion_code); + + case SCI_REQ_STP_PIO_WAIT_H2D: + return stp_request_pio_await_h2d_completion_tc_event(ireq, + completion_code); + + case SCI_REQ_STP_PIO_DATA_OUT: + return pio_data_out_tx_done_tc_event(ireq, completion_code); + + case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED: + return stp_request_soft_reset_await_h2d_asserted_tc_event(ireq, + completion_code); + + case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG: + return stp_request_soft_reset_await_h2d_diagnostic_tc_event(ireq, + completion_code); + + case SCI_REQ_ABORTING: + return request_aborting_state_tc_event(ireq, + completion_code); + + default: + dev_warn(&ihost->pdev->dev, + "%s: SCIC IO Request given task completion " + "notification %x while in wrong state %d\n", + __func__, + completion_code, + state); + return SCI_FAILURE_INVALID_STATE; + } +} + +/** + * isci_request_process_response_iu() - This function sets the status and + * response iu, in the task struct, from the request object for the upper + * layer driver. + * @sas_task: This parameter is the task struct from the upper layer driver. + * @resp_iu: This parameter points to the response iu of the completed request. + * @dev: This parameter specifies the linux device struct. + * + * none. + */ +static void isci_request_process_response_iu( + struct sas_task *task, + struct ssp_response_iu *resp_iu, + struct device *dev) +{ + dev_dbg(dev, + "%s: resp_iu = %p " + "resp_iu->status = 0x%x,\nresp_iu->datapres = %d " + "resp_iu->response_data_len = %x, " + "resp_iu->sense_data_len = %x\nrepsonse data: ", + __func__, + resp_iu, + resp_iu->status, + resp_iu->datapres, + resp_iu->response_data_len, + resp_iu->sense_data_len); + + task->task_status.stat = resp_iu->status; + + /* libsas updates the task status fields based on the response iu. */ + sas_ssp_task_response(dev, task, resp_iu); +} + +/** + * isci_request_set_open_reject_status() - This function prepares the I/O + * completion for OPEN_REJECT conditions. + * @request: This parameter is the completed isci_request object. + * @response_ptr: This parameter specifies the service response for the I/O. + * @status_ptr: This parameter specifies the exec status for the I/O. + * @complete_to_host_ptr: This parameter specifies the action to be taken by + * the LLDD with respect to completing this request or forcing an abort + * condition on the I/O. + * @open_rej_reason: This parameter specifies the encoded reason for the + * abandon-class reject. + * + * none. + */ +static void isci_request_set_open_reject_status( + struct isci_request *request, + struct sas_task *task, + enum service_response *response_ptr, + enum exec_status *status_ptr, + enum isci_completion_selection *complete_to_host_ptr, + enum sas_open_rej_reason open_rej_reason) +{ + /* Task in the target is done. */ + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + *response_ptr = SAS_TASK_UNDELIVERED; + *status_ptr = SAS_OPEN_REJECT; + *complete_to_host_ptr = isci_perform_normal_io_completion; + task->task_status.open_rej_reason = open_rej_reason; +} + +/** + * isci_request_handle_controller_specific_errors() - This function decodes + * controller-specific I/O completion error conditions. + * @request: This parameter is the completed isci_request object. + * @response_ptr: This parameter specifies the service response for the I/O. + * @status_ptr: This parameter specifies the exec status for the I/O. + * @complete_to_host_ptr: This parameter specifies the action to be taken by + * the LLDD with respect to completing this request or forcing an abort + * condition on the I/O. + * + * none. + */ +static void isci_request_handle_controller_specific_errors( + struct isci_remote_device *idev, + struct isci_request *request, + struct sas_task *task, + enum service_response *response_ptr, + enum exec_status *status_ptr, + enum isci_completion_selection *complete_to_host_ptr) +{ + unsigned int cstatus; + + cstatus = request->scu_status; + + dev_dbg(&request->isci_host->pdev->dev, + "%s: %p SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR " + "- controller status = 0x%x\n", + __func__, request, cstatus); + + /* Decode the controller-specific errors; most + * important is to recognize those conditions in which + * the target may still have a task outstanding that + * must be aborted. + * + * Note that there are SCU completion codes being + * named in the decode below for which SCIC has already + * done work to handle them in a way other than as + * a controller-specific completion code; these are left + * in the decode below for completeness sake. + */ + switch (cstatus) { + case SCU_TASK_DONE_DMASETUP_DIRERR: + /* Also SCU_TASK_DONE_SMP_FRM_TYPE_ERR: */ + case SCU_TASK_DONE_XFERCNT_ERR: + /* Also SCU_TASK_DONE_SMP_UFI_ERR: */ + if (task->task_proto == SAS_PROTOCOL_SMP) { + /* SCU_TASK_DONE_SMP_UFI_ERR == Task Done. */ + *response_ptr = SAS_TASK_COMPLETE; + + /* See if the device has been/is being stopped. Note + * that we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + if (!idev) + *status_ptr = SAS_DEVICE_UNKNOWN; + else + *status_ptr = SAS_ABORTED_TASK; + + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + + *complete_to_host_ptr = + isci_perform_normal_io_completion; + } else { + /* Task in the target is not done. */ + *response_ptr = SAS_TASK_UNDELIVERED; + + if (!idev) + *status_ptr = SAS_DEVICE_UNKNOWN; + else + *status_ptr = SAM_STAT_TASK_ABORTED; + + clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + + *complete_to_host_ptr = + isci_perform_error_io_completion; + } + + break; + + case SCU_TASK_DONE_CRC_ERR: + case SCU_TASK_DONE_NAK_CMD_ERR: + case SCU_TASK_DONE_EXCESS_DATA: + case SCU_TASK_DONE_UNEXP_FIS: + /* Also SCU_TASK_DONE_UNEXP_RESP: */ + case SCU_TASK_DONE_VIIT_ENTRY_NV: /* TODO - conditions? */ + case SCU_TASK_DONE_IIT_ENTRY_NV: /* TODO - conditions? */ + case SCU_TASK_DONE_RNCNV_OUTBOUND: /* TODO - conditions? */ + /* These are conditions in which the target + * has completed the task, so that no cleanup + * is necessary. + */ + *response_ptr = SAS_TASK_COMPLETE; + + /* See if the device has been/is being stopped. Note + * that we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + if (!idev) + *status_ptr = SAS_DEVICE_UNKNOWN; + else + *status_ptr = SAS_ABORTED_TASK; + + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + + *complete_to_host_ptr = isci_perform_normal_io_completion; + break; + + + /* Note that the only open reject completion codes seen here will be + * abandon-class codes; all others are automatically retried in the SCU. + */ + case SCU_TASK_OPEN_REJECT_WRONG_DESTINATION: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_WRONG_DEST); + break; + + case SCU_TASK_OPEN_REJECT_ZONE_VIOLATION: + + /* Note - the return of AB0 will change when + * libsas implements detection of zone violations. + */ + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_RESV_AB0); + break; + + case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_RESV_AB1); + break; + + case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_RESV_AB2); + break; + + case SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_3: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_RESV_AB3); + break; + + case SCU_TASK_OPEN_REJECT_BAD_DESTINATION: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_BAD_DEST); + break; + + case SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_STP_NORES); + break; + + case SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_EPROTO); + break; + + case SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED: + + isci_request_set_open_reject_status( + request, task, response_ptr, status_ptr, + complete_to_host_ptr, SAS_OREJ_CONN_RATE); + break; + + case SCU_TASK_DONE_LL_R_ERR: + /* Also SCU_TASK_DONE_ACK_NAK_TO: */ + case SCU_TASK_DONE_LL_PERR: + case SCU_TASK_DONE_LL_SY_TERM: + /* Also SCU_TASK_DONE_NAK_ERR:*/ + case SCU_TASK_DONE_LL_LF_TERM: + /* Also SCU_TASK_DONE_DATA_LEN_ERR: */ + case SCU_TASK_DONE_LL_ABORT_ERR: + case SCU_TASK_DONE_SEQ_INV_TYPE: + /* Also SCU_TASK_DONE_UNEXP_XR: */ + case SCU_TASK_DONE_XR_IU_LEN_ERR: + case SCU_TASK_DONE_INV_FIS_LEN: + /* Also SCU_TASK_DONE_XR_WD_LEN: */ + case SCU_TASK_DONE_SDMA_ERR: + case SCU_TASK_DONE_OFFSET_ERR: + case SCU_TASK_DONE_MAX_PLD_ERR: + case SCU_TASK_DONE_LF_ERR: + case SCU_TASK_DONE_SMP_RESP_TO_ERR: /* Escalate to dev reset? */ + case SCU_TASK_DONE_SMP_LL_RX_ERR: + case SCU_TASK_DONE_UNEXP_DATA: + case SCU_TASK_DONE_UNEXP_SDBFIS: + case SCU_TASK_DONE_REG_ERR: + case SCU_TASK_DONE_SDB_ERR: + case SCU_TASK_DONE_TASK_ABORT: + default: + /* Task in the target is not done. */ + *response_ptr = SAS_TASK_UNDELIVERED; + *status_ptr = SAM_STAT_TASK_ABORTED; + + if (task->task_proto == SAS_PROTOCOL_SMP) { + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + + *complete_to_host_ptr = isci_perform_normal_io_completion; + } else { + clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + + *complete_to_host_ptr = isci_perform_error_io_completion; + } + break; + } +} + +/** + * isci_task_save_for_upper_layer_completion() - This function saves the + * request for later completion to the upper layer driver. + * @host: This parameter is a pointer to the host on which the the request + * should be queued (either as an error or success). + * @request: This parameter is the completed request. + * @response: This parameter is the response code for the completed task. + * @status: This parameter is the status code for the completed task. + * + * none. + */ +static void isci_task_save_for_upper_layer_completion( + struct isci_host *host, + struct isci_request *request, + enum service_response response, + enum exec_status status, + enum isci_completion_selection task_notification_selection) +{ + struct sas_task *task = isci_request_access_task(request); + + task_notification_selection + = isci_task_set_completion_status(task, response, status, + task_notification_selection); + + /* Tasks aborted specifically by a call to the lldd_abort_task + * function should not be completed to the host in the regular path. + */ + switch (task_notification_selection) { + + case isci_perform_normal_io_completion: + + /* Normal notification (task_done) */ + dev_dbg(&host->pdev->dev, + "%s: Normal - task = %p, response=%d (%d), status=%d (%d)\n", + __func__, + task, + task->task_status.resp, response, + task->task_status.stat, status); + /* Add to the completed list. */ + list_add(&request->completed_node, + &host->requests_to_complete); + + /* Take the request off the device's pending request list. */ + list_del_init(&request->dev_node); + break; + + case isci_perform_aborted_io_completion: + /* No notification to libsas because this request is + * already in the abort path. + */ + dev_dbg(&host->pdev->dev, + "%s: Aborted - task = %p, response=%d (%d), status=%d (%d)\n", + __func__, + task, + task->task_status.resp, response, + task->task_status.stat, status); + + /* Wake up whatever process was waiting for this + * request to complete. + */ + WARN_ON(request->io_request_completion == NULL); + + if (request->io_request_completion != NULL) { + + /* Signal whoever is waiting that this + * request is complete. + */ + complete(request->io_request_completion); + } + break; + + case isci_perform_error_io_completion: + /* Use sas_task_abort */ + dev_dbg(&host->pdev->dev, + "%s: Error - task = %p, response=%d (%d), status=%d (%d)\n", + __func__, + task, + task->task_status.resp, response, + task->task_status.stat, status); + /* Add to the aborted list. */ + list_add(&request->completed_node, + &host->requests_to_errorback); + break; + + default: + dev_dbg(&host->pdev->dev, + "%s: Unknown - task = %p, response=%d (%d), status=%d (%d)\n", + __func__, + task, + task->task_status.resp, response, + task->task_status.stat, status); + + /* Add to the error to libsas list. */ + list_add(&request->completed_node, + &host->requests_to_errorback); + break; + } +} + +static void isci_request_process_stp_response(struct sas_task *task, + void *response_buffer) +{ + struct dev_to_host_fis *d2h_reg_fis = response_buffer; + struct task_status_struct *ts = &task->task_status; + struct ata_task_resp *resp = (void *)&ts->buf[0]; + + resp->frame_len = le16_to_cpu(*(__le16 *)(response_buffer + 6)); + memcpy(&resp->ending_fis[0], response_buffer + 16, 24); + ts->buf_valid_size = sizeof(*resp); + + /** + * If the device fault bit is set in the status register, then + * set the sense data and return. + */ + if (d2h_reg_fis->status & ATA_DF) + ts->stat = SAS_PROTO_RESPONSE; + else + ts->stat = SAM_STAT_GOOD; + + ts->resp = SAS_TASK_COMPLETE; +} + +static void isci_request_io_request_complete(struct isci_host *ihost, + struct isci_request *request, + enum sci_io_status completion_status) +{ + struct sas_task *task = isci_request_access_task(request); + struct ssp_response_iu *resp_iu; + void *resp_buf; + unsigned long task_flags; + struct isci_remote_device *idev = isci_lookup_device(task->dev); + enum service_response response = SAS_TASK_UNDELIVERED; + enum exec_status status = SAS_ABORTED_TASK; + enum isci_request_status request_status; + enum isci_completion_selection complete_to_host + = isci_perform_normal_io_completion; + + dev_dbg(&ihost->pdev->dev, + "%s: request = %p, task = %p,\n" + "task->data_dir = %d completion_status = 0x%x\n", + __func__, + request, + task, + task->data_dir, + completion_status); + + spin_lock(&request->state_lock); + request_status = request->status; + + /* Decode the request status. Note that if the request has been + * aborted by a task management function, we don't care + * what the status is. + */ + switch (request_status) { + + case aborted: + /* "aborted" indicates that the request was aborted by a task + * management function, since once a task management request is + * perfomed by the device, the request only completes because + * of the subsequent driver terminate. + * + * Aborted also means an external thread is explicitly managing + * this request, so that we do not complete it up the stack. + * + * The target is still there (since the TMF was successful). + */ + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + response = SAS_TASK_COMPLETE; + + /* See if the device has been/is being stopped. Note + * that we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + if (!idev) + status = SAS_DEVICE_UNKNOWN; + else + status = SAS_ABORTED_TASK; + + complete_to_host = isci_perform_aborted_io_completion; + /* This was an aborted request. */ + + spin_unlock(&request->state_lock); + break; + + case aborting: + /* aborting means that the task management function tried and + * failed to abort the request. We need to note the request + * as SAS_TASK_UNDELIVERED, so that the scsi mid layer marks the + * target as down. + * + * Aborting also means an external thread is explicitly managing + * this request, so that we do not complete it up the stack. + */ + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + response = SAS_TASK_UNDELIVERED; + + if (!idev) + /* The device has been /is being stopped. Note that + * we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + status = SAS_DEVICE_UNKNOWN; + else + status = SAS_PHY_DOWN; + + complete_to_host = isci_perform_aborted_io_completion; + + /* This was an aborted request. */ + + spin_unlock(&request->state_lock); + break; + + case terminating: + + /* This was an terminated request. This happens when + * the I/O is being terminated because of an action on + * the device (reset, tear down, etc.), and the I/O needs + * to be completed up the stack. + */ + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + response = SAS_TASK_UNDELIVERED; + + /* See if the device has been/is being stopped. Note + * that we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + if (!idev) + status = SAS_DEVICE_UNKNOWN; + else + status = SAS_ABORTED_TASK; + + complete_to_host = isci_perform_aborted_io_completion; + + /* This was a terminated request. */ + + spin_unlock(&request->state_lock); + break; + + case dead: + /* This was a terminated request that timed-out during the + * termination process. There is no task to complete to + * libsas. + */ + complete_to_host = isci_perform_normal_io_completion; + spin_unlock(&request->state_lock); + break; + + default: + + /* The request is done from an SCU HW perspective. */ + request->status = completed; + + spin_unlock(&request->state_lock); + + /* This is an active request being completed from the core. */ + switch (completion_status) { + + case SCI_IO_FAILURE_RESPONSE_VALID: + dev_dbg(&ihost->pdev->dev, + "%s: SCI_IO_FAILURE_RESPONSE_VALID (%p/%p)\n", + __func__, + request, + task); + + if (sas_protocol_ata(task->task_proto)) { + resp_buf = &request->stp.rsp; + isci_request_process_stp_response(task, + resp_buf); + } else if (SAS_PROTOCOL_SSP == task->task_proto) { + + /* crack the iu response buffer. */ + resp_iu = &request->ssp.rsp; + isci_request_process_response_iu(task, resp_iu, + &ihost->pdev->dev); + + } else if (SAS_PROTOCOL_SMP == task->task_proto) { + + dev_err(&ihost->pdev->dev, + "%s: SCI_IO_FAILURE_RESPONSE_VALID: " + "SAS_PROTOCOL_SMP protocol\n", + __func__); + + } else + dev_err(&ihost->pdev->dev, + "%s: unknown protocol\n", __func__); + + /* use the task status set in the task struct by the + * isci_request_process_response_iu call. + */ + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + response = task->task_status.resp; + status = task->task_status.stat; + break; + + case SCI_IO_SUCCESS: + case SCI_IO_SUCCESS_IO_DONE_EARLY: + + response = SAS_TASK_COMPLETE; + status = SAM_STAT_GOOD; + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + + if (task->task_proto == SAS_PROTOCOL_SMP) { + void *rsp = &request->smp.rsp; + + dev_dbg(&ihost->pdev->dev, + "%s: SMP protocol completion\n", + __func__); + + sg_copy_from_buffer( + &task->smp_task.smp_resp, 1, + rsp, sizeof(struct smp_resp)); + } else if (completion_status + == SCI_IO_SUCCESS_IO_DONE_EARLY) { + + /* This was an SSP / STP / SATA transfer. + * There is a possibility that less data than + * the maximum was transferred. + */ + u32 transferred_length = sci_req_tx_bytes(request); + + task->task_status.residual + = task->total_xfer_len - transferred_length; + + /* If there were residual bytes, call this an + * underrun. + */ + if (task->task_status.residual != 0) + status = SAS_DATA_UNDERRUN; + + dev_dbg(&ihost->pdev->dev, + "%s: SCI_IO_SUCCESS_IO_DONE_EARLY %d\n", + __func__, + status); + + } else + dev_dbg(&ihost->pdev->dev, + "%s: SCI_IO_SUCCESS\n", + __func__); + + break; + + case SCI_IO_FAILURE_TERMINATED: + dev_dbg(&ihost->pdev->dev, + "%s: SCI_IO_FAILURE_TERMINATED (%p/%p)\n", + __func__, + request, + task); + + /* The request was terminated explicitly. No handling + * is needed in the SCSI error handler path. + */ + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + response = SAS_TASK_UNDELIVERED; + + /* See if the device has been/is being stopped. Note + * that we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + if (!idev) + status = SAS_DEVICE_UNKNOWN; + else + status = SAS_ABORTED_TASK; + + complete_to_host = isci_perform_normal_io_completion; + break; + + case SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR: + + isci_request_handle_controller_specific_errors( + idev, request, task, &response, &status, + &complete_to_host); + + break; + + case SCI_IO_FAILURE_REMOTE_DEVICE_RESET_REQUIRED: + /* This is a special case, in that the I/O completion + * is telling us that the device needs a reset. + * In order for the device reset condition to be + * noticed, the I/O has to be handled in the error + * handler. Set the reset flag and cause the + * SCSI error thread to be scheduled. + */ + spin_lock_irqsave(&task->task_state_lock, task_flags); + task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; + spin_unlock_irqrestore(&task->task_state_lock, task_flags); + + /* Fail the I/O. */ + response = SAS_TASK_UNDELIVERED; + status = SAM_STAT_TASK_ABORTED; + + complete_to_host = isci_perform_error_io_completion; + clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + break; + + case SCI_FAILURE_RETRY_REQUIRED: + + /* Fail the I/O so it can be retried. */ + response = SAS_TASK_UNDELIVERED; + if (!idev) + status = SAS_DEVICE_UNKNOWN; + else + status = SAS_ABORTED_TASK; + + complete_to_host = isci_perform_normal_io_completion; + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + break; + + + default: + /* Catch any otherwise unhandled error codes here. */ + dev_dbg(&ihost->pdev->dev, + "%s: invalid completion code: 0x%x - " + "isci_request = %p\n", + __func__, completion_status, request); + + response = SAS_TASK_UNDELIVERED; + + /* See if the device has been/is being stopped. Note + * that we ignore the quiesce state, since we are + * concerned about the actual device state. + */ + if (!idev) + status = SAS_DEVICE_UNKNOWN; + else + status = SAS_ABORTED_TASK; + + if (SAS_PROTOCOL_SMP == task->task_proto) { + set_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + complete_to_host = isci_perform_normal_io_completion; + } else { + clear_bit(IREQ_COMPLETE_IN_TARGET, &request->flags); + complete_to_host = isci_perform_error_io_completion; + } + break; + } + break; + } + + switch (task->task_proto) { + case SAS_PROTOCOL_SSP: + if (task->data_dir == DMA_NONE) + break; + if (task->num_scatter == 0) + /* 0 indicates a single dma address */ + dma_unmap_single(&ihost->pdev->dev, + request->zero_scatter_daddr, + task->total_xfer_len, task->data_dir); + else /* unmap the sgl dma addresses */ + dma_unmap_sg(&ihost->pdev->dev, task->scatter, + request->num_sg_entries, task->data_dir); + break; + case SAS_PROTOCOL_SMP: { + struct scatterlist *sg = &task->smp_task.smp_req; + struct smp_req *smp_req; + void *kaddr; + + dma_unmap_sg(&ihost->pdev->dev, sg, 1, DMA_TO_DEVICE); + + /* need to swab it back in case the command buffer is re-used */ + kaddr = kmap_atomic(sg_page(sg), KM_IRQ0); + smp_req = kaddr + sg->offset; + sci_swab32_cpy(smp_req, smp_req, sg->length / sizeof(u32)); + kunmap_atomic(kaddr, KM_IRQ0); + break; + } + default: + break; + } + + /* Put the completed request on the correct list */ + isci_task_save_for_upper_layer_completion(ihost, request, response, + status, complete_to_host + ); + + /* complete the io request to the core. */ + sci_controller_complete_io(ihost, request->target_device, request); + isci_put_device(idev); + + /* set terminated handle so it cannot be completed or + * terminated again, and to cause any calls into abort + * task to recognize the already completed case. + */ + set_bit(IREQ_TERMINATED, &request->flags); +} + +static void sci_request_started_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); + struct domain_device *dev = ireq->target_device->domain_dev; + struct sas_task *task; + + /* XXX as hch said always creating an internal sas_task for tmf + * requests would simplify the driver + */ + task = ireq->ttype == io_task ? isci_request_access_task(ireq) : NULL; + + /* all unaccelerated request types (non ssp or ncq) handled with + * substates + */ + if (!task && dev->dev_type == SAS_END_DEV) { + sci_change_state(sm, SCI_REQ_TASK_WAIT_TC_COMP); + } else if (!task && + (isci_request_access_tmf(ireq)->tmf_code == isci_tmf_sata_srst_high || + isci_request_access_tmf(ireq)->tmf_code == isci_tmf_sata_srst_low)) { + sci_change_state(sm, SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED); + } else if (task && task->task_proto == SAS_PROTOCOL_SMP) { + sci_change_state(sm, SCI_REQ_SMP_WAIT_RESP); + } else if (task && sas_protocol_ata(task->task_proto) && + !task->ata_task.use_ncq) { + u32 state; + + if (task->data_dir == DMA_NONE) + state = SCI_REQ_STP_NON_DATA_WAIT_H2D; + else if (task->ata_task.dma_xfer) + state = SCI_REQ_STP_UDMA_WAIT_TC_COMP; + else /* PIO */ + state = SCI_REQ_STP_PIO_WAIT_H2D; + + sci_change_state(sm, state); + } +} + +static void sci_request_completed_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); + struct isci_host *ihost = ireq->owning_controller; + + /* Tell the SCI_USER that the IO request is complete */ + if (!test_bit(IREQ_TMF, &ireq->flags)) + isci_request_io_request_complete(ihost, ireq, + ireq->sci_status); + else + isci_task_request_complete(ihost, ireq, ireq->sci_status); +} + +static void sci_request_aborting_state_enter(struct sci_base_state_machine *sm) +{ + struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); + + /* Setting the abort bit in the Task Context is required by the silicon. */ + ireq->tc->abort = 1; +} + +static void sci_stp_request_started_non_data_await_h2d_completion_enter(struct sci_base_state_machine *sm) +{ + struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); + + ireq->target_device->working_request = ireq; +} + +static void sci_stp_request_started_pio_await_h2d_completion_enter(struct sci_base_state_machine *sm) +{ + struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); + + ireq->target_device->working_request = ireq; +} + +static void sci_stp_request_started_soft_reset_await_h2d_asserted_completion_enter(struct sci_base_state_machine *sm) +{ + struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); + + ireq->target_device->working_request = ireq; +} + +static void sci_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter(struct sci_base_state_machine *sm) +{ + struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); + struct scu_task_context *tc = ireq->tc; + struct host_to_dev_fis *h2d_fis; + enum sci_status status; + + /* Clear the SRST bit */ + h2d_fis = &ireq->stp.cmd; + h2d_fis->control = 0; + + /* Clear the TC control bit */ + tc->control_frame = 0; + + status = sci_controller_continue_io(ireq); + WARN_ONCE(status != SCI_SUCCESS, "isci: continue io failure\n"); +} + +static const struct sci_base_state sci_request_state_table[] = { + [SCI_REQ_INIT] = { }, + [SCI_REQ_CONSTRUCTED] = { }, + [SCI_REQ_STARTED] = { + .enter_state = sci_request_started_state_enter, + }, + [SCI_REQ_STP_NON_DATA_WAIT_H2D] = { + .enter_state = sci_stp_request_started_non_data_await_h2d_completion_enter, + }, + [SCI_REQ_STP_NON_DATA_WAIT_D2H] = { }, + [SCI_REQ_STP_PIO_WAIT_H2D] = { + .enter_state = sci_stp_request_started_pio_await_h2d_completion_enter, + }, + [SCI_REQ_STP_PIO_WAIT_FRAME] = { }, + [SCI_REQ_STP_PIO_DATA_IN] = { }, + [SCI_REQ_STP_PIO_DATA_OUT] = { }, + [SCI_REQ_STP_UDMA_WAIT_TC_COMP] = { }, + [SCI_REQ_STP_UDMA_WAIT_D2H] = { }, + [SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED] = { + .enter_state = sci_stp_request_started_soft_reset_await_h2d_asserted_completion_enter, + }, + [SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG] = { + .enter_state = sci_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter, + }, + [SCI_REQ_STP_SOFT_RESET_WAIT_D2H] = { }, + [SCI_REQ_TASK_WAIT_TC_COMP] = { }, + [SCI_REQ_TASK_WAIT_TC_RESP] = { }, + [SCI_REQ_SMP_WAIT_RESP] = { }, + [SCI_REQ_SMP_WAIT_TC_COMP] = { }, + [SCI_REQ_COMPLETED] = { + .enter_state = sci_request_completed_state_enter, + }, + [SCI_REQ_ABORTING] = { + .enter_state = sci_request_aborting_state_enter, + }, + [SCI_REQ_FINAL] = { }, +}; + +static void +sci_general_request_construct(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq) +{ + sci_init_sm(&ireq->sm, sci_request_state_table, SCI_REQ_INIT); + + ireq->target_device = idev; + ireq->protocol = SCIC_NO_PROTOCOL; + ireq->saved_rx_frame_index = SCU_INVALID_FRAME_INDEX; + + ireq->sci_status = SCI_SUCCESS; + ireq->scu_status = 0; + ireq->post_context = 0xFFFFFFFF; +} + +static enum sci_status +sci_io_request_construct(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *ireq) +{ + struct domain_device *dev = idev->domain_dev; + enum sci_status status = SCI_SUCCESS; + + /* Build the common part of the request */ + sci_general_request_construct(ihost, idev, ireq); + + if (idev->rnc.remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) + return SCI_FAILURE_INVALID_REMOTE_DEVICE; + + if (dev->dev_type == SAS_END_DEV) + /* pass */; + else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) + memset(&ireq->stp.cmd, 0, sizeof(ireq->stp.cmd)); + else if (dev_is_expander(dev)) + /* pass */; + else + return SCI_FAILURE_UNSUPPORTED_PROTOCOL; + + memset(ireq->tc, 0, offsetof(struct scu_task_context, sgl_pair_ab)); + + return status; +} + +enum sci_status sci_task_request_construct(struct isci_host *ihost, + struct isci_remote_device *idev, + u16 io_tag, struct isci_request *ireq) +{ + struct domain_device *dev = idev->domain_dev; + enum sci_status status = SCI_SUCCESS; + + /* Build the common part of the request */ + sci_general_request_construct(ihost, idev, ireq); + + if (dev->dev_type == SAS_END_DEV || + dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { + set_bit(IREQ_TMF, &ireq->flags); + memset(ireq->tc, 0, sizeof(struct scu_task_context)); + } else + status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; + + return status; +} + +static enum sci_status isci_request_ssp_request_construct( + struct isci_request *request) +{ + enum sci_status status; + + dev_dbg(&request->isci_host->pdev->dev, + "%s: request = %p\n", + __func__, + request); + status = sci_io_request_construct_basic_ssp(request); + return status; +} + +static enum sci_status isci_request_stp_request_construct(struct isci_request *ireq) +{ + struct sas_task *task = isci_request_access_task(ireq); + struct host_to_dev_fis *fis = &ireq->stp.cmd; + struct ata_queued_cmd *qc = task->uldd_task; + enum sci_status status; + + dev_dbg(&ireq->isci_host->pdev->dev, + "%s: ireq = %p\n", + __func__, + ireq); + + memcpy(fis, &task->ata_task.fis, sizeof(struct host_to_dev_fis)); + if (!task->ata_task.device_control_reg_update) + fis->flags |= 0x80; + fis->flags &= 0xF0; + + status = sci_io_request_construct_basic_sata(ireq); + + if (qc && (qc->tf.command == ATA_CMD_FPDMA_WRITE || + qc->tf.command == ATA_CMD_FPDMA_READ)) { + fis->sector_count = qc->tag << 3; + ireq->tc->type.stp.ncq_tag = qc->tag; + } + + return status; +} + +static enum sci_status +sci_io_request_construct_smp(struct device *dev, + struct isci_request *ireq, + struct sas_task *task) +{ + struct scatterlist *sg = &task->smp_task.smp_req; + struct isci_remote_device *idev; + struct scu_task_context *task_context; + struct isci_port *iport; + struct smp_req *smp_req; + void *kaddr; + u8 req_len; + u32 cmd; + + kaddr = kmap_atomic(sg_page(sg), KM_IRQ0); + smp_req = kaddr + sg->offset; + /* + * Look at the SMP requests' header fields; for certain SAS 1.x SMP + * functions under SAS 2.0, a zero request length really indicates + * a non-zero default length. + */ + if (smp_req->req_len == 0) { + switch (smp_req->func) { + case SMP_DISCOVER: + case SMP_REPORT_PHY_ERR_LOG: + case SMP_REPORT_PHY_SATA: + case SMP_REPORT_ROUTE_INFO: + smp_req->req_len = 2; + break; + case SMP_CONF_ROUTE_INFO: + case SMP_PHY_CONTROL: + case SMP_PHY_TEST_FUNCTION: + smp_req->req_len = 9; + break; + /* Default - zero is a valid default for 2.0. */ + } + } + req_len = smp_req->req_len; + sci_swab32_cpy(smp_req, smp_req, sg->length / sizeof(u32)); + cmd = *(u32 *) smp_req; + kunmap_atomic(kaddr, KM_IRQ0); + + if (!dma_map_sg(dev, sg, 1, DMA_TO_DEVICE)) + return SCI_FAILURE; + + ireq->protocol = SCIC_SMP_PROTOCOL; + + /* byte swap the smp request. */ + + task_context = ireq->tc; + + idev = ireq->target_device; + iport = idev->owning_port; + + /* + * Fill in the TC with the its required data + * 00h + */ + task_context->priority = 0; + task_context->initiator_request = 1; + task_context->connection_rate = idev->connection_rate; + task_context->protocol_engine_index = ISCI_PEG; + task_context->logical_port_index = iport->physical_port_index; + task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SMP; + task_context->abort = 0; + task_context->valid = SCU_TASK_CONTEXT_VALID; + task_context->context_type = SCU_TASK_CONTEXT_TYPE; + + /* 04h */ + task_context->remote_node_index = idev->rnc.remote_node_index; + task_context->command_code = 0; + task_context->task_type = SCU_TASK_TYPE_SMP_REQUEST; + + /* 08h */ + task_context->link_layer_control = 0; + task_context->do_not_dma_ssp_good_response = 1; + task_context->strict_ordering = 0; + task_context->control_frame = 1; + task_context->timeout_enable = 0; + task_context->block_guard_enable = 0; + + /* 0ch */ + task_context->address_modifier = 0; + + /* 10h */ + task_context->ssp_command_iu_length = req_len; + + /* 14h */ + task_context->transfer_length_bytes = 0; + + /* + * 18h ~ 30h, protocol specific + * since commandIU has been build by framework at this point, we just + * copy the frist DWord from command IU to this location. */ + memcpy(&task_context->type.smp, &cmd, sizeof(u32)); + + /* + * 40h + * "For SMP you could program it to zero. We would prefer that way + * so that done code will be consistent." - Venki + */ + task_context->task_phase = 0; + + ireq->post_context = (SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC | + (ISCI_PEG << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) | + (iport->physical_port_index << + SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) | + ISCI_TAG_TCI(ireq->io_tag)); + /* + * Copy the physical address for the command buffer to the SCU Task + * Context command buffer should not contain command header. + */ + task_context->command_iu_upper = upper_32_bits(sg_dma_address(sg)); + task_context->command_iu_lower = lower_32_bits(sg_dma_address(sg) + sizeof(u32)); + + /* SMP response comes as UF, so no need to set response IU address. */ + task_context->response_iu_upper = 0; + task_context->response_iu_lower = 0; + + sci_change_state(&ireq->sm, SCI_REQ_CONSTRUCTED); + + return SCI_SUCCESS; +} + +/* + * isci_smp_request_build() - This function builds the smp request. + * @ireq: This parameter points to the isci_request allocated in the + * request construct function. + * + * SCI_SUCCESS on successfull completion, or specific failure code. + */ +static enum sci_status isci_smp_request_build(struct isci_request *ireq) +{ + struct sas_task *task = isci_request_access_task(ireq); + struct device *dev = &ireq->isci_host->pdev->dev; + enum sci_status status = SCI_FAILURE; + + status = sci_io_request_construct_smp(dev, ireq, task); + if (status != SCI_SUCCESS) + dev_dbg(&ireq->isci_host->pdev->dev, + "%s: failed with status = %d\n", + __func__, + status); + + return status; +} + +/** + * isci_io_request_build() - This function builds the io request object. + * @ihost: This parameter specifies the ISCI host object + * @request: This parameter points to the isci_request object allocated in the + * request construct function. + * @sci_device: This parameter is the handle for the sci core's remote device + * object that is the destination for this request. + * + * SCI_SUCCESS on successfull completion, or specific failure code. + */ +static enum sci_status isci_io_request_build(struct isci_host *ihost, + struct isci_request *request, + struct isci_remote_device *idev) +{ + enum sci_status status = SCI_SUCCESS; + struct sas_task *task = isci_request_access_task(request); + + dev_dbg(&ihost->pdev->dev, + "%s: idev = 0x%p; request = %p, " + "num_scatter = %d\n", + __func__, + idev, + request, + task->num_scatter); + + /* map the sgl addresses, if present. + * libata does the mapping for sata devices + * before we get the request. + */ + if (task->num_scatter && + !sas_protocol_ata(task->task_proto) && + !(SAS_PROTOCOL_SMP & task->task_proto)) { + + request->num_sg_entries = dma_map_sg( + &ihost->pdev->dev, + task->scatter, + task->num_scatter, + task->data_dir + ); + + if (request->num_sg_entries == 0) + return SCI_FAILURE_INSUFFICIENT_RESOURCES; + } + + status = sci_io_request_construct(ihost, idev, request); + + if (status != SCI_SUCCESS) { + dev_dbg(&ihost->pdev->dev, + "%s: failed request construct\n", + __func__); + return SCI_FAILURE; + } + + switch (task->task_proto) { + case SAS_PROTOCOL_SMP: + status = isci_smp_request_build(request); + break; + case SAS_PROTOCOL_SSP: + status = isci_request_ssp_request_construct(request); + break; + case SAS_PROTOCOL_SATA: + case SAS_PROTOCOL_STP: + case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: + status = isci_request_stp_request_construct(request); + break; + default: + dev_dbg(&ihost->pdev->dev, + "%s: unknown protocol\n", __func__); + return SCI_FAILURE; + } + + return SCI_SUCCESS; +} + +static struct isci_request *isci_request_from_tag(struct isci_host *ihost, u16 tag) +{ + struct isci_request *ireq; + + ireq = ihost->reqs[ISCI_TAG_TCI(tag)]; + ireq->io_tag = tag; + ireq->io_request_completion = NULL; + ireq->flags = 0; + ireq->num_sg_entries = 0; + INIT_LIST_HEAD(&ireq->completed_node); + INIT_LIST_HEAD(&ireq->dev_node); + isci_request_change_state(ireq, allocated); + + return ireq; +} + +static struct isci_request *isci_io_request_from_tag(struct isci_host *ihost, + struct sas_task *task, + u16 tag) +{ + struct isci_request *ireq; + + ireq = isci_request_from_tag(ihost, tag); + ireq->ttype_ptr.io_task_ptr = task; + ireq->ttype = io_task; + task->lldd_task = ireq; + + return ireq; +} + +struct isci_request *isci_tmf_request_from_tag(struct isci_host *ihost, + struct isci_tmf *isci_tmf, + u16 tag) +{ + struct isci_request *ireq; + + ireq = isci_request_from_tag(ihost, tag); + ireq->ttype_ptr.tmf_task_ptr = isci_tmf; + ireq->ttype = tmf_task; + + return ireq; +} + +int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *idev, + struct sas_task *task, u16 tag) +{ + enum sci_status status = SCI_FAILURE_UNSUPPORTED_PROTOCOL; + struct isci_request *ireq; + unsigned long flags; + int ret = 0; + + /* do common allocation and init of request object. */ + ireq = isci_io_request_from_tag(ihost, task, tag); + + status = isci_io_request_build(ihost, ireq, idev); + if (status != SCI_SUCCESS) { + dev_dbg(&ihost->pdev->dev, + "%s: request_construct failed - status = 0x%x\n", + __func__, + status); + return status; + } + + spin_lock_irqsave(&ihost->scic_lock, flags); + + if (test_bit(IDEV_IO_NCQERROR, &idev->flags)) { + + if (isci_task_is_ncq_recovery(task)) { + + /* The device is in an NCQ recovery state. Issue the + * request on the task side. Note that it will + * complete on the I/O request side because the + * request was built that way (ie. + * ireq->is_task_management_request is false). + */ + status = sci_controller_start_task(ihost, + idev, + ireq); + } else { + status = SCI_FAILURE; + } + } else { + /* send the request, let the core assign the IO TAG. */ + status = sci_controller_start_io(ihost, idev, + ireq); + } + + if (status != SCI_SUCCESS && + status != SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { + dev_dbg(&ihost->pdev->dev, + "%s: failed request start (0x%x)\n", + __func__, status); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + return status; + } + + /* Either I/O started OK, or the core has signaled that + * the device needs a target reset. + * + * In either case, hold onto the I/O for later. + * + * Update it's status and add it to the list in the + * remote device object. + */ + list_add(&ireq->dev_node, &idev->reqs_in_process); + + if (status == SCI_SUCCESS) { + isci_request_change_state(ireq, started); + } else { + /* The request did not really start in the + * hardware, so clear the request handle + * here so no terminations will be done. + */ + set_bit(IREQ_TERMINATED, &ireq->flags); + isci_request_change_state(ireq, completed); + } + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + if (status == + SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { + /* Signal libsas that we need the SCSI error + * handler thread to work on this I/O and that + * we want a device reset. + */ + spin_lock_irqsave(&task->task_state_lock, flags); + task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + /* Cause this task to be scheduled in the SCSI error + * handler thread. + */ + isci_execpath_callback(ihost, task, + sas_task_abort); + + /* Change the status, since we are holding + * the I/O until it is managed by the SCSI + * error handler. + */ + status = SCI_SUCCESS; + } + + return ret; +} diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h new file mode 100644 index 000000000000..7a1d5a9778eb --- /dev/null +++ b/drivers/scsi/isci/request.h @@ -0,0 +1,448 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _ISCI_REQUEST_H_ +#define _ISCI_REQUEST_H_ + +#include "isci.h" +#include "host.h" +#include "scu_task_context.h" + +/** + * struct isci_request_status - This enum defines the possible states of an I/O + * request. + * + * + */ +enum isci_request_status { + unallocated = 0x00, + allocated = 0x01, + started = 0x02, + completed = 0x03, + aborting = 0x04, + aborted = 0x05, + terminating = 0x06, + dead = 0x07 +}; + +enum task_type { + io_task = 0, + tmf_task = 1 +}; + +enum sci_request_protocol { + SCIC_NO_PROTOCOL, + SCIC_SMP_PROTOCOL, + SCIC_SSP_PROTOCOL, + SCIC_STP_PROTOCOL +}; /* XXX remove me, use sas_task.{dev|task_proto} instead */; + +/** + * isci_stp_request - extra request infrastructure to handle pio/atapi protocol + * @pio_len - number of bytes requested at PIO setup + * @status - pio setup ending status value to tell us if we need + * to wait for another fis or if the transfer is complete. Upon + * receipt of a d2h fis this will be the status field of that fis. + * @sgl - track pio transfer progress as we iterate through the sgl + * @device_cdb_len - atapi device advertises it's transfer constraints at setup + */ +struct isci_stp_request { + u32 pio_len; + u8 status; + + struct isci_stp_pio_sgl { + int index; + u8 set; + u32 offset; + } sgl; + u32 device_cdb_len; +}; + +struct isci_request { + enum isci_request_status status; + #define IREQ_COMPLETE_IN_TARGET 0 + #define IREQ_TERMINATED 1 + #define IREQ_TMF 2 + #define IREQ_ACTIVE 3 + unsigned long flags; + /* XXX kill ttype and ttype_ptr, allocate full sas_task */ + enum task_type ttype; + union ttype_ptr_union { + struct sas_task *io_task_ptr; /* When ttype==io_task */ + struct isci_tmf *tmf_task_ptr; /* When ttype==tmf_task */ + } ttype_ptr; + struct isci_host *isci_host; + /* For use in the requests_to_{complete|abort} lists: */ + struct list_head completed_node; + /* For use in the reqs_in_process list: */ + struct list_head dev_node; + spinlock_t state_lock; + dma_addr_t request_daddr; + dma_addr_t zero_scatter_daddr; + unsigned int num_sg_entries; + /* Note: "io_request_completion" is completed in two different ways + * depending on whether this is a TMF or regular request. + * - TMF requests are completed in the thread that started them; + * - regular requests are completed in the request completion callback + * function. + * This difference in operation allows the aborter of a TMF request + * to be sure that once the TMF request completes, the I/O that the + * TMF was aborting is guaranteed to have completed. + * + * XXX kill io_request_completion + */ + struct completion *io_request_completion; + struct sci_base_state_machine sm; + struct isci_host *owning_controller; + struct isci_remote_device *target_device; + u16 io_tag; + enum sci_request_protocol protocol; + u32 scu_status; /* hardware result */ + u32 sci_status; /* upper layer disposition */ + u32 post_context; + struct scu_task_context *tc; + /* could be larger with sg chaining */ + #define SCU_SGL_SIZE ((SCI_MAX_SCATTER_GATHER_ELEMENTS + 1) / 2) + struct scu_sgl_element_pair sg_table[SCU_SGL_SIZE] __attribute__ ((aligned(32))); + /* This field is a pointer to the stored rx frame data. It is used in + * STP internal requests and SMP response frames. If this field is + * non-NULL the saved frame must be released on IO request completion. + */ + u32 saved_rx_frame_index; + + union { + struct { + union { + struct ssp_cmd_iu cmd; + struct ssp_task_iu tmf; + }; + union { + struct ssp_response_iu rsp; + u8 rsp_buf[SSP_RESP_IU_MAX_SIZE]; + }; + } ssp; + struct { + struct smp_resp rsp; + } smp; + struct { + struct isci_stp_request req; + struct host_to_dev_fis cmd; + struct dev_to_host_fis rsp; + } stp; + }; +}; + +static inline struct isci_request *to_ireq(struct isci_stp_request *stp_req) +{ + struct isci_request *ireq; + + ireq = container_of(stp_req, typeof(*ireq), stp.req); + return ireq; +} + +/** + * enum sci_base_request_states - This enumeration depicts all the states for + * the common request state machine. + * + * + */ +enum sci_base_request_states { + /* + * Simply the initial state for the base request state machine. + */ + SCI_REQ_INIT, + + /* + * This state indicates that the request has been constructed. + * This state is entered from the INITIAL state. + */ + SCI_REQ_CONSTRUCTED, + + /* + * This state indicates that the request has been started. This state + * is entered from the CONSTRUCTED state. + */ + SCI_REQ_STARTED, + + SCI_REQ_STP_UDMA_WAIT_TC_COMP, + SCI_REQ_STP_UDMA_WAIT_D2H, + + SCI_REQ_STP_NON_DATA_WAIT_H2D, + SCI_REQ_STP_NON_DATA_WAIT_D2H, + + SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED, + SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG, + SCI_REQ_STP_SOFT_RESET_WAIT_D2H, + + /* + * While in this state the IO request object is waiting for the TC + * completion notification for the H2D Register FIS + */ + SCI_REQ_STP_PIO_WAIT_H2D, + + /* + * While in this state the IO request object is waiting for either a + * PIO Setup FIS or a D2H register FIS. The type of frame received is + * based on the result of the prior frame and line conditions. + */ + SCI_REQ_STP_PIO_WAIT_FRAME, + + /* + * While in this state the IO request object is waiting for a DATA + * frame from the device. + */ + SCI_REQ_STP_PIO_DATA_IN, + + /* + * While in this state the IO request object is waiting to transmit + * the next data frame to the device. + */ + SCI_REQ_STP_PIO_DATA_OUT, + + /* + * The AWAIT_TC_COMPLETION sub-state indicates that the started raw + * task management request is waiting for the transmission of the + * initial frame (i.e. command, task, etc.). + */ + SCI_REQ_TASK_WAIT_TC_COMP, + + /* + * This sub-state indicates that the started task management request + * is waiting for the reception of an unsolicited frame + * (i.e. response IU). + */ + SCI_REQ_TASK_WAIT_TC_RESP, + + /* + * This sub-state indicates that the started task management request + * is waiting for the reception of an unsolicited frame + * (i.e. response IU). + */ + SCI_REQ_SMP_WAIT_RESP, + + /* + * The AWAIT_TC_COMPLETION sub-state indicates that the started SMP + * request is waiting for the transmission of the initial frame + * (i.e. command, task, etc.). + */ + SCI_REQ_SMP_WAIT_TC_COMP, + + /* + * This state indicates that the request has completed. + * This state is entered from the STARTED state. This state is entered + * from the ABORTING state. + */ + SCI_REQ_COMPLETED, + + /* + * This state indicates that the request is in the process of being + * terminated/aborted. + * This state is entered from the CONSTRUCTED state. + * This state is entered from the STARTED state. + */ + SCI_REQ_ABORTING, + + /* + * Simply the final state for the base request state machine. + */ + SCI_REQ_FINAL, +}; + +enum sci_status sci_request_start(struct isci_request *ireq); +enum sci_status sci_io_request_terminate(struct isci_request *ireq); +enum sci_status +sci_io_request_event_handler(struct isci_request *ireq, + u32 event_code); +enum sci_status +sci_io_request_frame_handler(struct isci_request *ireq, + u32 frame_index); +enum sci_status +sci_task_request_terminate(struct isci_request *ireq); +extern enum sci_status +sci_request_complete(struct isci_request *ireq); +extern enum sci_status +sci_io_request_tc_completion(struct isci_request *ireq, u32 code); + +/* XXX open code in caller */ +static inline dma_addr_t +sci_io_request_get_dma_addr(struct isci_request *ireq, void *virt_addr) +{ + + char *requested_addr = (char *)virt_addr; + char *base_addr = (char *)ireq; + + BUG_ON(requested_addr < base_addr); + BUG_ON((requested_addr - base_addr) >= sizeof(*ireq)); + + return ireq->request_daddr + (requested_addr - base_addr); +} + +/** + * isci_request_change_state() - This function sets the status of the request + * object. + * @request: This parameter points to the isci_request object + * @status: This Parameter is the new status of the object + * + */ +static inline enum isci_request_status +isci_request_change_state(struct isci_request *isci_request, + enum isci_request_status status) +{ + enum isci_request_status old_state; + unsigned long flags; + + dev_dbg(&isci_request->isci_host->pdev->dev, + "%s: isci_request = %p, state = 0x%x\n", + __func__, + isci_request, + status); + + BUG_ON(isci_request == NULL); + + spin_lock_irqsave(&isci_request->state_lock, flags); + old_state = isci_request->status; + isci_request->status = status; + spin_unlock_irqrestore(&isci_request->state_lock, flags); + + return old_state; +} + +/** + * isci_request_change_started_to_newstate() - This function sets the status of + * the request object. + * @request: This parameter points to the isci_request object + * @status: This Parameter is the new status of the object + * + * state previous to any change. + */ +static inline enum isci_request_status +isci_request_change_started_to_newstate(struct isci_request *isci_request, + struct completion *completion_ptr, + enum isci_request_status newstate) +{ + enum isci_request_status old_state; + unsigned long flags; + + spin_lock_irqsave(&isci_request->state_lock, flags); + + old_state = isci_request->status; + + if (old_state == started || old_state == aborting) { + BUG_ON(isci_request->io_request_completion != NULL); + + isci_request->io_request_completion = completion_ptr; + isci_request->status = newstate; + } + + spin_unlock_irqrestore(&isci_request->state_lock, flags); + + dev_dbg(&isci_request->isci_host->pdev->dev, + "%s: isci_request = %p, old_state = 0x%x\n", + __func__, + isci_request, + old_state); + + return old_state; +} + +/** + * isci_request_change_started_to_aborted() - This function sets the status of + * the request object. + * @request: This parameter points to the isci_request object + * @completion_ptr: This parameter is saved as the kernel completion structure + * signalled when the old request completes. + * + * state previous to any change. + */ +static inline enum isci_request_status +isci_request_change_started_to_aborted(struct isci_request *isci_request, + struct completion *completion_ptr) +{ + return isci_request_change_started_to_newstate(isci_request, + completion_ptr, + aborted); +} + +#define isci_request_access_task(req) ((req)->ttype_ptr.io_task_ptr) + +#define isci_request_access_tmf(req) ((req)->ttype_ptr.tmf_task_ptr) + +struct isci_request *isci_tmf_request_from_tag(struct isci_host *ihost, + struct isci_tmf *isci_tmf, + u16 tag); +int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *idev, + struct sas_task *task, u16 tag); +void isci_terminate_pending_requests(struct isci_host *ihost, + struct isci_remote_device *idev); +enum sci_status +sci_task_request_construct(struct isci_host *ihost, + struct isci_remote_device *idev, + u16 io_tag, + struct isci_request *ireq); +enum sci_status +sci_task_request_construct_ssp(struct isci_request *ireq); +enum sci_status +sci_task_request_construct_sata(struct isci_request *ireq); +void sci_smp_request_copy_response(struct isci_request *ireq); + +static inline int isci_task_is_ncq_recovery(struct sas_task *task) +{ + return (sas_protocol_ata(task->task_proto) && + task->ata_task.fis.command == ATA_CMD_READ_LOG_EXT && + task->ata_task.fis.lbal == ATA_LOG_SATA_NCQ); + +} + +#endif /* !defined(_ISCI_REQUEST_H_) */ diff --git a/drivers/scsi/isci/sas.h b/drivers/scsi/isci/sas.h new file mode 100644 index 000000000000..462b15174d3f --- /dev/null +++ b/drivers/scsi/isci/sas.h @@ -0,0 +1,219 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCI_SAS_H_ +#define _SCI_SAS_H_ + +#include <linux/kernel.h> + +/* + * SATA FIS Types These constants depict the various SATA FIS types devined in + * the serial ATA specification. + * XXX: This needs to go into <scsi/sas.h> + */ +#define FIS_REGH2D 0x27 +#define FIS_REGD2H 0x34 +#define FIS_SETDEVBITS 0xA1 +#define FIS_DMA_ACTIVATE 0x39 +#define FIS_DMA_SETUP 0x41 +#define FIS_BIST_ACTIVATE 0x58 +#define FIS_PIO_SETUP 0x5F +#define FIS_DATA 0x46 + +/**************************************************************************/ +#define SSP_RESP_IU_MAX_SIZE 280 + +/* + * contents of the SSP COMMAND INFORMATION UNIT. + * For specific information on each of these individual fields please + * reference the SAS specification SSP transport layer section. + * XXX: This needs to go into <scsi/sas.h> + */ +struct ssp_cmd_iu { + u8 LUN[8]; + u8 add_cdb_len:6; + u8 _r_a:2; + u8 _r_b; + u8 en_fburst:1; + u8 task_prio:4; + u8 task_attr:3; + u8 _r_c; + + u8 cdb[16]; +} __packed; + +/* + * contents of the SSP TASK INFORMATION UNIT. + * For specific information on each of these individual fields please + * reference the SAS specification SSP transport layer section. + * XXX: This needs to go into <scsi/sas.h> + */ +struct ssp_task_iu { + u8 LUN[8]; + u8 _r_a; + u8 task_func; + u8 _r_b[4]; + u16 task_tag; + u8 _r_c[12]; +} __packed; + + +/* + * struct smp_req_phy_id - This structure defines the contents of + * an SMP Request that is comprised of the struct smp_request_header and a + * phy identifier. + * Examples: SMP_REQUEST_DISCOVER, SMP_REQUEST_REPORT_PHY_SATA. + * + * For specific information on each of these individual fields please reference + * the SAS specification. + */ +struct smp_req_phy_id { + u8 _r_a[4]; /* bytes 4-7 */ + + u8 ign_zone_grp:1; /* byte 8 */ + u8 _r_b:7; + + u8 phy_id; /* byte 9 */ + u8 _r_c; /* byte 10 */ + u8 _r_d; /* byte 11 */ +} __packed; + +/* + * struct smp_req_config_route_info - This structure defines the + * contents of an SMP Configure Route Information request. + * + * For specific information on each of these individual fields please reference + * the SAS specification. + */ +struct smp_req_conf_rtinfo { + u16 exp_change_cnt; /* bytes 4-5 */ + u8 exp_rt_idx_hi; /* byte 6 */ + u8 exp_rt_idx; /* byte 7 */ + + u8 _r_a; /* byte 8 */ + u8 phy_id; /* byte 9 */ + u16 _r_b; /* bytes 10-11 */ + + u8 _r_c:7; /* byte 12 */ + u8 dis_rt_entry:1; + u8 _r_d[3]; /* bytes 13-15 */ + + u8 rt_sas_addr[8]; /* bytes 16-23 */ + u8 _r_e[16]; /* bytes 24-39 */ +} __packed; + +/* + * struct smp_req_phycntl - This structure defines the contents of an + * SMP Phy Controller request. + * + * For specific information on each of these individual fields please reference + * the SAS specification. + */ +struct smp_req_phycntl { + u16 exp_change_cnt; /* byte 4-5 */ + + u8 _r_a[3]; /* bytes 6-8 */ + + u8 phy_id; /* byte 9 */ + u8 phy_op; /* byte 10 */ + + u8 upd_pathway:1; /* byte 11 */ + u8 _r_b:7; + + u8 _r_c[12]; /* byte 12-23 */ + + u8 att_dev_name[8]; /* byte 24-31 */ + + u8 _r_d:4; /* byte 32 */ + u8 min_linkrate:4; + + u8 _r_e:4; /* byte 33 */ + u8 max_linkrate:4; + + u8 _r_f[2]; /* byte 34-35 */ + + u8 pathway:4; /* byte 36 */ + u8 _r_g:4; + + u8 _r_h[3]; /* bytes 37-39 */ +} __packed; + +/* + * struct smp_req - This structure simply unionizes the existing request + * structures into a common request type. + * + * XXX: This data structure may need to go to scsi/sas.h + */ +struct smp_req { + u8 type; /* byte 0 */ + u8 func; /* byte 1 */ + u8 alloc_resp_len; /* byte 2 */ + u8 req_len; /* byte 3 */ + u8 req_data[0]; +} __packed; + +#define SMP_RESP_HDR_SZ 4 + +/* + * struct sci_sas_address - This structure depicts how a SAS address is + * represented by SCI. + * XXX convert this to u8 [SAS_ADDR_SIZE] like the rest of libsas + * + */ +struct sci_sas_address { + u32 high; + u32 low; +}; +#endif diff --git a/drivers/scsi/isci/scu_completion_codes.h b/drivers/scsi/isci/scu_completion_codes.h new file mode 100644 index 000000000000..c8b329c695f9 --- /dev/null +++ b/drivers/scsi/isci/scu_completion_codes.h @@ -0,0 +1,283 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCU_COMPLETION_CODES_HEADER_ +#define _SCU_COMPLETION_CODES_HEADER_ + +/** + * This file contains the constants and macros for the SCU hardware completion + * codes. + * + * + */ + +#define SCU_COMPLETION_TYPE_SHIFT 28 +#define SCU_COMPLETION_TYPE_MASK 0x70000000 + +/** + * SCU_COMPLETION_TYPE() - + * + * This macro constructs an SCU completion type + */ +#define SCU_COMPLETION_TYPE(type) \ + ((u32)(type) << SCU_COMPLETION_TYPE_SHIFT) + +/** + * SCU_COMPLETION_TYPE() - + * + * These macros contain the SCU completion types SCU_COMPLETION_TYPE + */ +#define SCU_COMPLETION_TYPE_TASK SCU_COMPLETION_TYPE(0) +#define SCU_COMPLETION_TYPE_SDMA SCU_COMPLETION_TYPE(1) +#define SCU_COMPLETION_TYPE_UFI SCU_COMPLETION_TYPE(2) +#define SCU_COMPLETION_TYPE_EVENT SCU_COMPLETION_TYPE(3) +#define SCU_COMPLETION_TYPE_NOTIFY SCU_COMPLETION_TYPE(4) + +/** + * + * + * These constants provide the shift and mask values for the various parts of + * an SCU completion code. + */ +#define SCU_COMPLETION_STATUS_MASK 0x0FFC0000 +#define SCU_COMPLETION_TL_STATUS_MASK 0x0FC00000 +#define SCU_COMPLETION_TL_STATUS_SHIFT 22 +#define SCU_COMPLETION_SDMA_STATUS_MASK 0x003C0000 +#define SCU_COMPLETION_PEG_MASK 0x00010000 +#define SCU_COMPLETION_PORT_MASK 0x00007000 +#define SCU_COMPLETION_PE_MASK SCU_COMPLETION_PORT_MASK +#define SCU_COMPLETION_PE_SHIFT 12 +#define SCU_COMPLETION_INDEX_MASK 0x00000FFF + +/** + * SCU_GET_COMPLETION_TYPE() - + * + * This macro returns the SCU completion type. + */ +#define SCU_GET_COMPLETION_TYPE(completion_code) \ + ((completion_code) & SCU_COMPLETION_TYPE_MASK) + +/** + * SCU_GET_COMPLETION_STATUS() - + * + * This macro returns the SCU completion status. + */ +#define SCU_GET_COMPLETION_STATUS(completion_code) \ + ((completion_code) & SCU_COMPLETION_STATUS_MASK) + +/** + * SCU_GET_COMPLETION_TL_STATUS() - + * + * This macro returns the transport layer completion status. + */ +#define SCU_GET_COMPLETION_TL_STATUS(completion_code) \ + ((completion_code) & SCU_COMPLETION_TL_STATUS_MASK) + +/** + * SCU_MAKE_COMPLETION_STATUS() - + * + * This macro takes a completion code and performs the shift and mask + * operations to turn it into a completion code that can be compared to a + * SCU_GET_COMPLETION_TL_STATUS. + */ +#define SCU_MAKE_COMPLETION_STATUS(completion_code) \ + ((u32)(completion_code) << SCU_COMPLETION_TL_STATUS_SHIFT) + +/** + * SCU_NORMALIZE_COMPLETION_STATUS() - + * + * This macro takes a SCU_GET_COMPLETION_TL_STATUS and normalizes it for a + * return code. + */ +#define SCU_NORMALIZE_COMPLETION_STATUS(completion_code) \ + (\ + ((completion_code) & SCU_COMPLETION_TL_STATUS_MASK) \ + >> SCU_COMPLETION_TL_STATUS_SHIFT \ + ) + +/** + * SCU_GET_COMPLETION_SDMA_STATUS() - + * + * This macro returns the SDMA completion status. + */ +#define SCU_GET_COMPLETION_SDMA_STATUS(completion_code) \ + ((completion_code) & SCU_COMPLETION_SDMA_STATUS_MASK) + +/** + * SCU_GET_COMPLETION_PEG() - + * + * This macro returns the Protocol Engine Group from the completion code. + */ +#define SCU_GET_COMPLETION_PEG(completion_code) \ + ((completion_code) & SCU_COMPLETION_PEG_MASK) + +/** + * SCU_GET_COMPLETION_PORT() - + * + * This macro reuturns the logical port index from the completion code. + */ +#define SCU_GET_COMPLETION_PORT(completion_code) \ + ((completion_code) & SCU_COMPLETION_PORT_MASK) + +/** + * SCU_GET_PROTOCOL_ENGINE_INDEX() - + * + * This macro returns the PE index from the completion code. + */ +#define SCU_GET_PROTOCOL_ENGINE_INDEX(completion_code) \ + (((completion_code) & SCU_COMPLETION_PE_MASK) >> SCU_COMPLETION_PE_SHIFT) + +/** + * SCU_GET_COMPLETION_INDEX() - + * + * This macro returns the index of the completion which is either a TCi or an + * RNi depending on the completion type. + */ +#define SCU_GET_COMPLETION_INDEX(completion_code) \ + ((completion_code) & SCU_COMPLETION_INDEX_MASK) + +#define SCU_UNSOLICITED_FRAME_MASK 0x0FFF0000 +#define SCU_UNSOLICITED_FRAME_SHIFT 16 + +/** + * SCU_GET_FRAME_INDEX() - + * + * This macro returns a normalized frame index from an unsolicited frame + * completion. + */ +#define SCU_GET_FRAME_INDEX(completion_code) \ + (\ + ((completion_code) & SCU_UNSOLICITED_FRAME_MASK) \ + >> SCU_UNSOLICITED_FRAME_SHIFT \ + ) + +#define SCU_UNSOLICITED_FRAME_ERROR_MASK 0x00008000 + +/** + * SCU_GET_FRAME_ERROR() - + * + * This macro returns a zero (0) value if there is no frame error otherwise it + * returns non-zero (!0). + */ +#define SCU_GET_FRAME_ERROR(completion_code) \ + ((completion_code) & SCU_UNSOLICITED_FRAME_ERROR_MASK) + +/** + * + * + * These constants represent normalized completion codes which must be shifted + * 18 bits to match it with the hardware completion code. In a 16-bit compiler, + * immediate constants are 16-bit values (the size of an int). If we shift + * those by 18 bits, we completely lose the value. To ensure the value is a + * 32-bit value like we want, each immediate value must be cast to a u32. + */ +#define SCU_TASK_DONE_GOOD ((u32)0x00) +#define SCU_TASK_DONE_CRC_ERR ((u32)0x14) +#define SCU_TASK_DONE_CHECK_RESPONSE ((u32)0x14) +#define SCU_TASK_DONE_GEN_RESPONSE ((u32)0x15) +#define SCU_TASK_DONE_NAK_CMD_ERR ((u32)0x16) +#define SCU_TASK_DONE_CMD_LL_R_ERR ((u32)0x16) +#define SCU_TASK_DONE_LL_R_ERR ((u32)0x17) +#define SCU_TASK_DONE_ACK_NAK_TO ((u32)0x17) +#define SCU_TASK_DONE_LL_PERR ((u32)0x18) +#define SCU_TASK_DONE_LL_SY_TERM ((u32)0x19) +#define SCU_TASK_DONE_NAK_ERR ((u32)0x19) +#define SCU_TASK_DONE_LL_LF_TERM ((u32)0x1A) +#define SCU_TASK_DONE_DATA_LEN_ERR ((u32)0x1A) +#define SCU_TASK_DONE_LL_CL_TERM ((u32)0x1B) +#define SCU_TASK_DONE_LL_ABORT_ERR ((u32)0x1B) +#define SCU_TASK_DONE_SEQ_INV_TYPE ((u32)0x1C) +#define SCU_TASK_DONE_UNEXP_XR ((u32)0x1C) +#define SCU_TASK_DONE_INV_FIS_TYPE ((u32)0x1D) +#define SCU_TASK_DONE_XR_IU_LEN_ERR ((u32)0x1D) +#define SCU_TASK_DONE_INV_FIS_LEN ((u32)0x1E) +#define SCU_TASK_DONE_XR_WD_LEN ((u32)0x1E) +#define SCU_TASK_DONE_SDMA_ERR ((u32)0x1F) +#define SCU_TASK_DONE_OFFSET_ERR ((u32)0x20) +#define SCU_TASK_DONE_MAX_PLD_ERR ((u32)0x21) +#define SCU_TASK_DONE_EXCESS_DATA ((u32)0x22) +#define SCU_TASK_DONE_LF_ERR ((u32)0x23) +#define SCU_TASK_DONE_UNEXP_FIS ((u32)0x24) +#define SCU_TASK_DONE_UNEXP_RESP ((u32)0x24) +#define SCU_TASK_DONE_EARLY_RESP ((u32)0x25) +#define SCU_TASK_DONE_SMP_RESP_TO_ERR ((u32)0x26) +#define SCU_TASK_DONE_DMASETUP_DIRERR ((u32)0x27) +#define SCU_TASK_DONE_SMP_UFI_ERR ((u32)0x27) +#define SCU_TASK_DONE_XFERCNT_ERR ((u32)0x28) +#define SCU_TASK_DONE_SMP_FRM_TYPE_ERR ((u32)0x28) +#define SCU_TASK_DONE_SMP_LL_RX_ERR ((u32)0x29) +#define SCU_TASK_DONE_RESP_LEN_ERR ((u32)0x2A) +#define SCU_TASK_DONE_UNEXP_DATA ((u32)0x2B) +#define SCU_TASK_DONE_OPEN_FAIL ((u32)0x2C) +#define SCU_TASK_DONE_UNEXP_SDBFIS ((u32)0x2D) +#define SCU_TASK_DONE_REG_ERR ((u32)0x2E) +#define SCU_TASK_DONE_SDB_ERR ((u32)0x2F) +#define SCU_TASK_DONE_TASK_ABORT ((u32)0x30) +#define SCU_TASK_DONE_CMD_SDMA_ERR ((U32)0x32) +#define SCU_TASK_DONE_CMD_LL_ABORT_ERR ((U32)0x33) +#define SCU_TASK_OPEN_REJECT_WRONG_DESTINATION ((u32)0x34) +#define SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1 ((u32)0x35) +#define SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2 ((u32)0x36) +#define SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_3 ((u32)0x37) +#define SCU_TASK_OPEN_REJECT_BAD_DESTINATION ((u32)0x38) +#define SCU_TASK_OPEN_REJECT_ZONE_VIOLATION ((u32)0x39) +#define SCU_TASK_DONE_VIIT_ENTRY_NV ((u32)0x3A) +#define SCU_TASK_DONE_IIT_ENTRY_NV ((u32)0x3B) +#define SCU_TASK_DONE_RNCNV_OUTBOUND ((u32)0x3C) +#define SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY ((u32)0x3D) +#define SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED ((u32)0x3E) +#define SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED ((u32)0x3F) + +#endif /* _SCU_COMPLETION_CODES_HEADER_ */ diff --git a/drivers/scsi/isci/scu_event_codes.h b/drivers/scsi/isci/scu_event_codes.h new file mode 100644 index 000000000000..36a945ad5722 --- /dev/null +++ b/drivers/scsi/isci/scu_event_codes.h @@ -0,0 +1,336 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __SCU_EVENT_CODES_HEADER__ +#define __SCU_EVENT_CODES_HEADER__ + +/** + * This file contains the constants and macros for the SCU event codes. + * + * + */ + +#define SCU_EVENT_TYPE_CODE_SHIFT 24 +#define SCU_EVENT_TYPE_CODE_MASK 0x0F000000 + +#define SCU_EVENT_SPECIFIC_CODE_SHIFT 18 +#define SCU_EVENT_SPECIFIC_CODE_MASK 0x00FC0000 + +#define SCU_EVENT_CODE_MASK \ + (SCU_EVENT_TYPE_CODE_MASK | SCU_EVENT_SPECIFIC_CODE_MASK) + +/** + * SCU_EVENT_TYPE() - + * + * This macro constructs an SCU event type from the type value. + */ +#define SCU_EVENT_TYPE(type) \ + ((u32)(type) << SCU_EVENT_TYPE_CODE_SHIFT) + +/** + * SCU_EVENT_SPECIFIC() - + * + * This macro constructs an SCU event specifier from the code value. + */ +#define SCU_EVENT_SPECIFIC(code) \ + ((u32)(code) << SCU_EVENT_SPECIFIC_CODE_SHIFT) + +/** + * SCU_EVENT_MESSAGE() - + * + * This macro constructs a combines an SCU event type and SCU event specifier + * from the type and code values. + */ +#define SCU_EVENT_MESSAGE(type, code) \ + ((type) | SCU_EVENT_SPECIFIC(code)) + +/** + * SCU_EVENT_TYPE() - + * + * SCU_EVENT_TYPES + */ +#define SCU_EVENT_TYPE_SMU_COMMAND_ERROR SCU_EVENT_TYPE(0x08) +#define SCU_EVENT_TYPE_SMU_PCQ_ERROR SCU_EVENT_TYPE(0x09) +#define SCU_EVENT_TYPE_SMU_ERROR SCU_EVENT_TYPE(0x00) +#define SCU_EVENT_TYPE_TRANSPORT_ERROR SCU_EVENT_TYPE(0x01) +#define SCU_EVENT_TYPE_BROADCAST_CHANGE SCU_EVENT_TYPE(0x02) +#define SCU_EVENT_TYPE_OSSP_EVENT SCU_EVENT_TYPE(0x03) +#define SCU_EVENT_TYPE_FATAL_MEMORY_ERROR SCU_EVENT_TYPE(0x0F) +#define SCU_EVENT_TYPE_RNC_SUSPEND_TX SCU_EVENT_TYPE(0x04) +#define SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX SCU_EVENT_TYPE(0x05) +#define SCU_EVENT_TYPE_RNC_OPS_MISC SCU_EVENT_TYPE(0x06) +#define SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT SCU_EVENT_TYPE(0x07) +#define SCU_EVENT_TYPE_ERR_CNT_EVENT SCU_EVENT_TYPE(0x0A) + +/** + * + * + * SCU_EVENT_SPECIFIERS + */ +#define SCU_EVENT_SPECIFIER_DRIVER_SUSPEND 0x20 +#define SCU_EVENT_SPECIFIER_RNC_RELEASE 0x00 + +/** + * + * + * SMU_COMMAND_EVENTS + */ +#define SCU_EVENT_INVALID_CONTEXT_COMMAND \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_COMMAND_ERROR, 0x00) + +/** + * + * + * SMU_PCQ_EVENTS + */ +#define SCU_EVENT_UNCORRECTABLE_PCQ_ERROR \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_PCQ_ERROR, 0x00) + +/** + * + * + * SMU_EVENTS + */ +#define SCU_EVENT_UNCORRECTABLE_REGISTER_WRITE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_ERROR, 0x02) +#define SCU_EVENT_UNCORRECTABLE_REGISTER_READ \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_ERROR, 0x03) +#define SCU_EVENT_PCIE_INTERFACE_ERROR \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_ERROR, 0x04) +#define SCU_EVENT_FUNCTION_LEVEL_RESET \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_SMU_ERROR, 0x05) + +/** + * + * + * TRANSPORT_LEVEL_ERRORS + */ +#define SCU_EVENT_ACK_NAK_TIMEOUT_ERROR \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_TRANSPORT_ERROR, 0x00) + +/** + * + * + * BROADCAST_CHANGE_EVENTS + */ +#define SCU_EVENT_BROADCAST_CHANGE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x01) +#define SCU_EVENT_BROADCAST_RESERVED0 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x02) +#define SCU_EVENT_BROADCAST_RESERVED1 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x03) +#define SCU_EVENT_BROADCAST_SES \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x04) +#define SCU_EVENT_BROADCAST_EXPANDER \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x05) +#define SCU_EVENT_BROADCAST_AEN \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x06) +#define SCU_EVENT_BROADCAST_RESERVED3 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x07) +#define SCU_EVENT_BROADCAST_RESERVED4 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x08) +#define SCU_EVENT_PE_SUSPENDED \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_BROADCAST_CHANGE, 0x09) + +/** + * + * + * OSSP_EVENTS + */ +#define SCU_EVENT_PORT_SELECTOR_DETECTED \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x10) +#define SCU_EVENT_SENT_PORT_SELECTION \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x11) +#define SCU_EVENT_HARD_RESET_TRANSMITTED \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x12) +#define SCU_EVENT_HARD_RESET_RECEIVED \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x13) +#define SCU_EVENT_RECEIVED_IDENTIFY_TIMEOUT \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x15) +#define SCU_EVENT_LINK_FAILURE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x16) +#define SCU_EVENT_SATA_SPINUP_HOLD \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x17) +#define SCU_EVENT_SAS_15_SSC \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x18) +#define SCU_EVENT_SAS_15 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x19) +#define SCU_EVENT_SAS_30_SSC \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1A) +#define SCU_EVENT_SAS_30 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1B) +#define SCU_EVENT_SAS_60_SSC \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1C) +#define SCU_EVENT_SAS_60 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1D) +#define SCU_EVENT_SATA_15_SSC \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1E) +#define SCU_EVENT_SATA_15 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x1F) +#define SCU_EVENT_SATA_30_SSC \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x20) +#define SCU_EVENT_SATA_30 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x21) +#define SCU_EVENT_SATA_60_SSC \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x22) +#define SCU_EVENT_SATA_60 \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x23) +#define SCU_EVENT_SAS_PHY_DETECTED \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x24) +#define SCU_EVENT_SATA_PHY_DETECTED \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_OSSP_EVENT, 0x25) + +/** + * + * + * FATAL_INTERNAL_MEMORY_ERROR_EVENTS + */ +#define SCU_EVENT_TSC_RNSC_UNCORRECTABLE_ERROR \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_FATAL_MEMORY_ERROR, 0x00) +#define SCU_EVENT_TC_RNC_UNCORRECTABLE_ERROR \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_FATAL_MEMORY_ERROR, 0x01) +#define SCU_EVENT_ZPT_UNCORRECTABLE_ERROR \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_FATAL_MEMORY_ERROR, 0x02) + +/** + * + * + * REMOTE_NODE_SUSPEND_EVENTS + */ +#define SCU_EVENT_TL_RNC_SUSPEND_TX \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_SUSPEND_TX, 0x00) +#define SCU_EVENT_TL_RNC_SUSPEND_TX_RX \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX, 0x00) +#define SCU_EVENT_DRIVER_POST_RNC_SUSPEND_TX \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_SUSPEND_TX, 0x20) +#define SCU_EVENT_DRIVER_POST_RNC_SUSPEND_TX_RX \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX, 0x20) + +/** + * + * + * REMOTE_NODE_MISC_EVENTS + */ +#define SCU_EVENT_POST_RCN_RELEASE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_OPS_MISC, SCU_EVENT_SPECIFIER_RNC_RELEASE) +#define SCU_EVENT_POST_IT_NEXUS_LOSS_TIMER_ENABLE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_OPS_MISC, 0x01) +#define SCU_EVENT_POST_IT_NEXUS_LOSS_TIMER_DISABLE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_OPS_MISC, 0x02) +#define SCU_EVENT_POST_RNC_COMPLETE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_OPS_MISC, 0x03) +#define SCU_EVENT_POST_RNC_INVALIDATE_COMPLETE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_RNC_OPS_MISC, 0x04) + +/** + * + * + * ERROR_COUNT_EVENT + */ +#define SCU_EVENT_RX_CREDIT_BLOCKED_RECEIVED \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_ERR_CNT_EVENT, 0x00) +#define SCU_EVENT_TX_DONE_CREDIT_TIMEOUT \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_ERR_CNT_EVENT, 0x01) +#define SCU_EVENT_RX_DONE_CREDIT_TIMEOUT \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_ERR_CNT_EVENT, 0x02) + +/** + * scu_get_event_type() - + * + * This macro returns the SCU event type from the event code. + */ +#define scu_get_event_type(event_code) \ + ((event_code) & SCU_EVENT_TYPE_CODE_MASK) + +/** + * scu_get_event_specifier() - + * + * This macro returns the SCU event specifier from the event code. + */ +#define scu_get_event_specifier(event_code) \ + ((event_code) & SCU_EVENT_SPECIFIC_CODE_MASK) + +/** + * scu_get_event_code() - + * + * This macro returns the combined SCU event type and SCU event specifier from + * the event code. + */ +#define scu_get_event_code(event_code) \ + ((event_code) & SCU_EVENT_CODE_MASK) + + +/** + * + * + * PTS_SCHEDULE_EVENT + */ +#define SCU_EVENT_SMP_RESPONSE_NO_PE \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT, 0x00) +#define SCU_EVENT_SPECIFIC_SMP_RESPONSE_NO_PE \ + scu_get_event_specifier(SCU_EVENT_SMP_RESPONSE_NO_PE) + +#define SCU_EVENT_TASK_TIMEOUT \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT, 0x01) +#define SCU_EVENT_SPECIFIC_TASK_TIMEOUT \ + scu_get_event_specifier(SCU_EVENT_TASK_TIMEOUT) + +#define SCU_EVENT_IT_NEXUS_TIMEOUT \ + SCU_EVENT_MESSAGE(SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT, 0x02) +#define SCU_EVENT_SPECIFIC_IT_NEXUS_TIMEOUT \ + scu_get_event_specifier(SCU_EVENT_IT_NEXUS_TIMEOUT) + + +#endif /* __SCU_EVENT_CODES_HEADER__ */ diff --git a/drivers/scsi/isci/scu_remote_node_context.h b/drivers/scsi/isci/scu_remote_node_context.h new file mode 100644 index 000000000000..33745adc826b --- /dev/null +++ b/drivers/scsi/isci/scu_remote_node_context.h @@ -0,0 +1,229 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __SCU_REMOTE_NODE_CONTEXT_HEADER__ +#define __SCU_REMOTE_NODE_CONTEXT_HEADER__ + +/** + * This file contains the structures and constatns used by the SCU hardware to + * describe a remote node context. + * + * + */ + +/** + * struct ssp_remote_node_context - This structure contains the SCU hardware + * definition for an SSP remote node. + * + * + */ +struct ssp_remote_node_context { + /* WORD 0 */ + + /** + * This field is the remote node index assigned for this remote node. All + * remote nodes must have a unique remote node index. The value of the remote + * node index can not exceed the maximum number of remote nodes reported in + * the SCU device context capacity register. + */ + u32 remote_node_index:12; + u32 reserved0_1:4; + + /** + * This field tells the SCU hardware how many simultaneous connections that + * this remote node will support. + */ + u32 remote_node_port_width:4; + + /** + * This field tells the SCU hardware which logical port to associate with this + * remote node. + */ + u32 logical_port_index:3; + u32 reserved0_2:5; + + /** + * This field will enable the I_T nexus loss timer for this remote node. + */ + u32 nexus_loss_timer_enable:1; + + /** + * This field is the for driver debug only and is not used. + */ + u32 check_bit:1; + + /** + * This field must be set to true when the hardware DMAs the remote node + * context to the hardware SRAM. When the remote node is being invalidated + * this field must be set to false. + */ + u32 is_valid:1; + + /** + * This field must be set to true. + */ + u32 is_remote_node_context:1; + + /* WORD 1 - 2 */ + + /** + * This is the low word of the remote device SAS Address + */ + u32 remote_sas_address_lo; + + /** + * This field is the high word of the remote device SAS Address + */ + u32 remote_sas_address_hi; + + /* WORD 3 */ + /** + * This field reprensets the function number assigned to this remote device. + * This value must match the virtual function number that is being used to + * communicate to the device. + */ + u32 function_number:8; + u32 reserved3_1:8; + + /** + * This field provides the driver a way to cheat on the arbitration wait time + * for this remote node. + */ + u32 arbitration_wait_time:16; + + /* WORD 4 */ + /** + * This field tells the SCU hardware how long this device may occupy the + * connection before it must be closed. + */ + u32 connection_occupancy_timeout:16; + + /** + * This field tells the SCU hardware how long to maintain a connection when + * there are no frames being transmitted on the link. + */ + u32 connection_inactivity_timeout:16; + + /* WORD 5 */ + /** + * This field allows the driver to cheat on the arbitration wait time for this + * remote node. + */ + u32 initial_arbitration_wait_time:16; + + /** + * This field is tells the hardware what to program for the connection rate in + * the open address frame. See the SAS spec for valid values. + */ + u32 oaf_connection_rate:4; + + /** + * This field tells the SCU hardware what to program for the features in the + * open address frame. See the SAS spec for valid values. + */ + u32 oaf_features:4; + + /** + * This field tells the SCU hardware what to use for the source zone group in + * the open address frame. See the SAS spec for more details on zoning. + */ + u32 oaf_source_zone_group:8; + + /* WORD 6 */ + /** + * This field tells the SCU hardware what to use as the more capibilities in + * the open address frame. See the SAS Spec for details. + */ + u32 oaf_more_compatibility_features; + + /* WORD 7 */ + u32 reserved7; + +}; + +/** + * struct stp_remote_node_context - This structure contains the SCU hardware + * definition for a STP remote node. + * + * STP Targets are not yet supported so this definition is a placeholder until + * we do support them. + */ +struct stp_remote_node_context { + /** + * Placeholder data for the STP remote node. + */ + u32 data[8]; + +}; + +/** + * This union combines the SAS and SATA remote node definitions. + * + * union scu_remote_node_context + */ +union scu_remote_node_context { + /** + * SSP Remote Node + */ + struct ssp_remote_node_context ssp; + + /** + * STP Remote Node + */ + struct stp_remote_node_context stp; + +}; + +#endif /* __SCU_REMOTE_NODE_CONTEXT_HEADER__ */ diff --git a/drivers/scsi/isci/scu_task_context.h b/drivers/scsi/isci/scu_task_context.h new file mode 100644 index 000000000000..7df87d923285 --- /dev/null +++ b/drivers/scsi/isci/scu_task_context.h @@ -0,0 +1,942 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCU_TASK_CONTEXT_H_ +#define _SCU_TASK_CONTEXT_H_ + +/** + * This file contains the structures and constants for the SCU hardware task + * context. + * + * + */ + + +/** + * enum scu_ssp_task_type - This enumberation defines the various SSP task + * types the SCU hardware will accept. The definition for the various task + * types the SCU hardware will accept can be found in the DS specification. + * + * + */ +typedef enum { + SCU_TASK_TYPE_IOREAD, /* /< IO READ direction or no direction */ + SCU_TASK_TYPE_IOWRITE, /* /< IO Write direction */ + SCU_TASK_TYPE_SMP_REQUEST, /* /< SMP Request type */ + SCU_TASK_TYPE_RESPONSE, /* /< Driver generated response frame (targt mode) */ + SCU_TASK_TYPE_RAW_FRAME, /* /< Raw frame request type */ + SCU_TASK_TYPE_PRIMITIVE /* /< Request for a primitive to be transmitted */ +} scu_ssp_task_type; + +/** + * enum scu_sata_task_type - This enumeration defines the various SATA task + * types the SCU hardware will accept. The definition for the various task + * types the SCU hardware will accept can be found in the DS specification. + * + * + */ +typedef enum { + SCU_TASK_TYPE_DMA_IN, /* /< Read request */ + SCU_TASK_TYPE_FPDMAQ_READ, /* /< NCQ read request */ + SCU_TASK_TYPE_PACKET_DMA_IN, /* /< Packet read request */ + SCU_TASK_TYPE_SATA_RAW_FRAME, /* /< Raw frame request */ + RESERVED_4, + RESERVED_5, + RESERVED_6, + RESERVED_7, + SCU_TASK_TYPE_DMA_OUT, /* /< Write request */ + SCU_TASK_TYPE_FPDMAQ_WRITE, /* /< NCQ write Request */ + SCU_TASK_TYPE_PACKET_DMA_OUT /* /< Packet write request */ +} scu_sata_task_type; + + +/** + * + * + * SCU_CONTEXT_TYPE + */ +#define SCU_TASK_CONTEXT_TYPE 0 +#define SCU_RNC_CONTEXT_TYPE 1 + +/** + * + * + * SCU_TASK_CONTEXT_VALIDITY + */ +#define SCU_TASK_CONTEXT_INVALID 0 +#define SCU_TASK_CONTEXT_VALID 1 + +/** + * + * + * SCU_COMMAND_CODE + */ +#define SCU_COMMAND_CODE_INITIATOR_NEW_TASK 0 +#define SCU_COMMAND_CODE_ACTIVE_TASK 1 +#define SCU_COMMAND_CODE_PRIMITIVE_SEQ_TASK 2 +#define SCU_COMMAND_CODE_TARGET_RAW_FRAMES 3 + +/** + * + * + * SCU_TASK_PRIORITY + */ +/** + * + * + * This priority is used when there is no priority request for this request. + */ +#define SCU_TASK_PRIORITY_NORMAL 0 + +/** + * + * + * This priority indicates that the task should be scheduled to the head of the + * queue. The task will NOT be executed if the TX is suspended for the remote + * node. + */ +#define SCU_TASK_PRIORITY_HEAD_OF_Q 1 + +/** + * + * + * This priority indicates that the task will be executed before all + * SCU_TASK_PRIORITY_NORMAL and SCU_TASK_PRIORITY_HEAD_OF_Q tasks. The task + * WILL be executed if the TX is suspended for the remote node. + */ +#define SCU_TASK_PRIORITY_HIGH 2 + +/** + * + * + * This task priority is reserved and should not be used. + */ +#define SCU_TASK_PRIORITY_RESERVED 3 + +#define SCU_TASK_INITIATOR_MODE 1 +#define SCU_TASK_TARGET_MODE 0 + +#define SCU_TASK_REGULAR 0 +#define SCU_TASK_ABORTED 1 + +/* direction bit defintion */ +/** + * + * + * SATA_DIRECTION + */ +#define SCU_SATA_WRITE_DATA_DIRECTION 0 +#define SCU_SATA_READ_DATA_DIRECTION 1 + +/** + * + * + * SCU_COMMAND_CONTEXT_MACROS These macros provide the mask and shift + * operations to construct the various SCU commands + */ +#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_SHIFT 21 +#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_MASK 0x00E00000 +#define scu_get_command_request_type(x) \ + ((x) & SCU_CONTEXT_COMMAND_REQUEST_TYPE_MASK) + +#define SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_SHIFT 18 +#define SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_MASK 0x001C0000 +#define scu_get_command_request_subtype(x) \ + ((x) & SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_MASK) + +#define SCU_CONTEXT_COMMAND_REQUEST_FULLTYPE_MASK \ + (\ + SCU_CONTEXT_COMMAND_REQUEST_TYPE_MASK \ + | SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_MASK \ + ) +#define scu_get_command_request_full_type(x) \ + ((x) & SCU_CONTEXT_COMMAND_REQUEST_FULLTYPE_MASK) + +#define SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT 16 +#define SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_MASK 0x00010000 +#define scu_get_command_protocl_engine_group(x) \ + ((x) & SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_MASK) + +#define SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT 12 +#define SCU_CONTEXT_COMMAND_LOGICAL_PORT_MASK 0x00007000 +#define scu_get_command_reqeust_logical_port(x) \ + ((x) & SCU_CONTEXT_COMMAND_LOGICAL_PORT_MASK) + + +#define MAKE_SCU_CONTEXT_COMMAND_TYPE(type) \ + ((u32)(type) << SCU_CONTEXT_COMMAND_REQUEST_TYPE_SHIFT) + +/** + * MAKE_SCU_CONTEXT_COMMAND_TYPE() - + * + * SCU_COMMAND_TYPES These constants provide the grouping of the different SCU + * command types. + */ +#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC MAKE_SCU_CONTEXT_COMMAND_TYPE(0) +#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC MAKE_SCU_CONTEXT_COMMAND_TYPE(1) +#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC MAKE_SCU_CONTEXT_COMMAND_TYPE(2) +#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC MAKE_SCU_CONTEXT_COMMAND_TYPE(3) +#define SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC MAKE_SCU_CONTEXT_COMMAND_TYPE(6) + +#define MAKE_SCU_CONTEXT_COMMAND_REQUEST(type, command) \ + ((type) | ((command) << SCU_CONTEXT_COMMAND_REQUEST_SUBTYPE_SHIFT)) + +/** + * + * + * SCU_REQUEST_TYPES These constants are the various request types that can be + * posted to the SCU hardware. + */ +#define SCU_CONTEXT_COMMAND_REQUST_POST_TC \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC, 0)) + +#define SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC, 1)) + +#define SCU_CONTEXT_COMMAND_REQUST_DUMP_TC \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_TC, 0)) + +#define SCU_CONTEXT_COMMAND_POST_RNC_32 \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC, 0)) + +#define SCU_CONTEXT_COMMAND_POST_RNC_96 \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC, 1)) + +#define SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_RNC, 2)) + +#define SCU_CONTEXT_COMMAND_DUMP_RNC_32 \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC, 0)) + +#define SCU_CONTEXT_COMMAND_DUMP_RNC_96 \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_DUMP_RNC, 1)) + +#define SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 0)) + +#define SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX_RX \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 1)) + +#define SCU_CONTEXT_COMMAND_POST_RNC_RESUME \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 2)) + +#define SCU_CONTEXT_IT_NEXUS_LOSS_TIMER_ENABLE \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 3)) + +#define SCU_CONTEXT_IT_NEXUS_LOSS_TIMER_DISABLE \ + (MAKE_SCU_CONTEXT_COMMAND_REQUEST(SCU_CONTEXT_COMMAND_REQUEST_TYPE_OTHER_RNC, 4)) + +/** + * + * + * SCU_TASK_CONTEXT_PROTOCOL SCU Task context protocol types this is uesd to + * program the SCU Task context protocol field in word 0x00. + */ +#define SCU_TASK_CONTEXT_PROTOCOL_SMP 0x00 +#define SCU_TASK_CONTEXT_PROTOCOL_SSP 0x01 +#define SCU_TASK_CONTEXT_PROTOCOL_STP 0x02 +#define SCU_TASK_CONTEXT_PROTOCOL_NONE 0x07 + +/** + * struct ssp_task_context - This is the SCU hardware definition for an SSP + * request. + * + * + */ +struct ssp_task_context { + /* OFFSET 0x18 */ + u32 reserved00:24; + u32 frame_type:8; + + /* OFFSET 0x1C */ + u32 reserved01; + + /* OFFSET 0x20 */ + u32 fill_bytes:2; + u32 reserved02:6; + u32 changing_data_pointer:1; + u32 retransmit:1; + u32 retry_data_frame:1; + u32 tlr_control:2; + u32 reserved03:19; + + /* OFFSET 0x24 */ + u32 uiRsvd4; + + /* OFFSET 0x28 */ + u32 target_port_transfer_tag:16; + u32 tag:16; + + /* OFFSET 0x2C */ + u32 data_offset; +}; + +/** + * struct stp_task_context - This is the SCU hardware definition for an STP + * request. + * + * + */ +struct stp_task_context { + /* OFFSET 0x18 */ + u32 fis_type:8; + u32 pm_port:4; + u32 reserved0:3; + u32 control:1; + u32 command:8; + u32 features:8; + + /* OFFSET 0x1C */ + u32 reserved1; + + /* OFFSET 0x20 */ + u32 reserved2; + + /* OFFSET 0x24 */ + u32 reserved3; + + /* OFFSET 0x28 */ + u32 ncq_tag:5; + u32 reserved4:27; + + /* OFFSET 0x2C */ + u32 data_offset; /* TODO: What is this used for? */ +}; + +/** + * struct smp_task_context - This is the SCU hardware definition for an SMP + * request. + * + * + */ +struct smp_task_context { + /* OFFSET 0x18 */ + u32 response_length:8; + u32 function_result:8; + u32 function:8; + u32 frame_type:8; + + /* OFFSET 0x1C */ + u32 smp_response_ufi:12; + u32 reserved1:20; + + /* OFFSET 0x20 */ + u32 reserved2; + + /* OFFSET 0x24 */ + u32 reserved3; + + /* OFFSET 0x28 */ + u32 reserved4; + + /* OFFSET 0x2C */ + u32 reserved5; +}; + +/** + * struct primitive_task_context - This is the SCU hardware definition used + * when the driver wants to send a primitive on the link. + * + * + */ +struct primitive_task_context { + /* OFFSET 0x18 */ + /** + * This field is the control word and it must be 0. + */ + u32 control; /* /< must be set to 0 */ + + /* OFFSET 0x1C */ + /** + * This field specifies the primitive that is to be transmitted. + */ + u32 sequence; + + /* OFFSET 0x20 */ + u32 reserved0; + + /* OFFSET 0x24 */ + u32 reserved1; + + /* OFFSET 0x28 */ + u32 reserved2; + + /* OFFSET 0x2C */ + u32 reserved3; +}; + +/** + * The union of the protocols that can be selected in the SCU task context + * field. + * + * protocol_context + */ +union protocol_context { + struct ssp_task_context ssp; + struct stp_task_context stp; + struct smp_task_context smp; + struct primitive_task_context primitive; + u32 words[6]; +}; + +/** + * struct scu_sgl_element - This structure represents a single SCU defined SGL + * element. SCU SGLs contain a 64 bit address with the maximum data transfer + * being 24 bits in size. The SGL can not cross a 4GB boundary. + * + * struct scu_sgl_element + */ +struct scu_sgl_element { + /** + * This field is the upper 32 bits of the 64 bit physical address. + */ + u32 address_upper; + + /** + * This field is the lower 32 bits of the 64 bit physical address. + */ + u32 address_lower; + + /** + * This field is the number of bytes to transfer. + */ + u32 length:24; + + /** + * This field is the address modifier to be used when a virtual function is + * requesting a data transfer. + */ + u32 address_modifier:8; + +}; + +#define SCU_SGL_ELEMENT_PAIR_A 0 +#define SCU_SGL_ELEMENT_PAIR_B 1 + +/** + * struct scu_sgl_element_pair - This structure is the SCU hardware definition + * of a pair of SGL elements. The SCU hardware always works on SGL pairs. + * They are refered to in the DS specification as SGL A and SGL B. Each SGL + * pair is followed by the address of the next pair. + * + * + */ +struct scu_sgl_element_pair { + /* OFFSET 0x60-0x68 */ + /** + * This field is the SGL element A of the SGL pair. + */ + struct scu_sgl_element A; + + /* OFFSET 0x6C-0x74 */ + /** + * This field is the SGL element B of the SGL pair. + */ + struct scu_sgl_element B; + + /* OFFSET 0x78-0x7C */ + /** + * This field is the upper 32 bits of the 64 bit address to the next SGL + * element pair. + */ + u32 next_pair_upper; + + /** + * This field is the lower 32 bits of the 64 bit address to the next SGL + * element pair. + */ + u32 next_pair_lower; + +}; + +/** + * struct transport_snapshot - This structure is the SCU hardware scratch area + * for the task context. This is set to 0 by the driver but can be read by + * issuing a dump TC request to the SCU. + * + * + */ +struct transport_snapshot { + /* OFFSET 0x48 */ + u32 xfer_rdy_write_data_length; + + /* OFFSET 0x4C */ + u32 data_offset; + + /* OFFSET 0x50 */ + u32 data_transfer_size:24; + u32 reserved_50_0:8; + + /* OFFSET 0x54 */ + u32 next_initiator_write_data_offset; + + /* OFFSET 0x58 */ + u32 next_initiator_write_data_xfer_size:24; + u32 reserved_58_0:8; +}; + +/** + * struct scu_task_context - This structure defines the contents of the SCU + * silicon task context. It lays out all of the fields according to the + * expected order and location for the Storage Controller unit. + * + * + */ +struct scu_task_context { + /* OFFSET 0x00 ------ */ + /** + * This field must be encoded to one of the valid SCU task priority values + * - SCU_TASK_PRIORITY_NORMAL + * - SCU_TASK_PRIORITY_HEAD_OF_Q + * - SCU_TASK_PRIORITY_HIGH + */ + u32 priority:2; + + /** + * This field must be set to true if this is an initiator generated request. + * Until target mode is supported all task requests are initiator requests. + */ + u32 initiator_request:1; + + /** + * This field must be set to one of the valid connection rates valid values + * are 0x8, 0x9, and 0xA. + */ + u32 connection_rate:4; + + /** + * This field muse be programed when generating an SMP response since the SMP + * connection remains open until the SMP response is generated. + */ + u32 protocol_engine_index:3; + + /** + * This field must contain the logical port for the task request. + */ + u32 logical_port_index:3; + + /** + * This field must be set to one of the SCU_TASK_CONTEXT_PROTOCOL values + * - SCU_TASK_CONTEXT_PROTOCOL_SMP + * - SCU_TASK_CONTEXT_PROTOCOL_SSP + * - SCU_TASK_CONTEXT_PROTOCOL_STP + * - SCU_TASK_CONTEXT_PROTOCOL_NONE + */ + u32 protocol_type:3; + + /** + * This filed must be set to the TCi allocated for this task + */ + u32 task_index:12; + + /** + * This field is reserved and must be set to 0x00 + */ + u32 reserved_00_0:1; + + /** + * For a normal task request this must be set to 0. If this is an abort of + * this task request it must be set to 1. + */ + u32 abort:1; + + /** + * This field must be set to true for the SCU hardware to process the task. + */ + u32 valid:1; + + /** + * This field must be set to SCU_TASK_CONTEXT_TYPE + */ + u32 context_type:1; + + /* OFFSET 0x04 */ + /** + * This field contains the RNi that is the target of this request. + */ + u32 remote_node_index:12; + + /** + * This field is programmed if this is a mirrored request, which we are not + * using, in which case it is the RNi for the mirrored target. + */ + u32 mirrored_node_index:12; + + /** + * This field is programmed with the direction of the SATA reqeust + * - SCU_SATA_WRITE_DATA_DIRECTION + * - SCU_SATA_READ_DATA_DIRECTION + */ + u32 sata_direction:1; + + /** + * This field is programmsed with one of the following SCU_COMMAND_CODE + * - SCU_COMMAND_CODE_INITIATOR_NEW_TASK + * - SCU_COMMAND_CODE_ACTIVE_TASK + * - SCU_COMMAND_CODE_PRIMITIVE_SEQ_TASK + * - SCU_COMMAND_CODE_TARGET_RAW_FRAMES + */ + u32 command_code:2; + + /** + * This field is set to true if the remote node should be suspended. + * This bit is only valid for SSP & SMP target devices. + */ + u32 suspend_node:1; + + /** + * This field is programmed with one of the following command type codes + * + * For SAS requests use the scu_ssp_task_type + * - SCU_TASK_TYPE_IOREAD + * - SCU_TASK_TYPE_IOWRITE + * - SCU_TASK_TYPE_SMP_REQUEST + * - SCU_TASK_TYPE_RESPONSE + * - SCU_TASK_TYPE_RAW_FRAME + * - SCU_TASK_TYPE_PRIMITIVE + * + * For SATA requests use the scu_sata_task_type + * - SCU_TASK_TYPE_DMA_IN + * - SCU_TASK_TYPE_FPDMAQ_READ + * - SCU_TASK_TYPE_PACKET_DMA_IN + * - SCU_TASK_TYPE_SATA_RAW_FRAME + * - SCU_TASK_TYPE_DMA_OUT + * - SCU_TASK_TYPE_FPDMAQ_WRITE + * - SCU_TASK_TYPE_PACKET_DMA_OUT + */ + u32 task_type:4; + + /* OFFSET 0x08 */ + /** + * This field is reserved and the must be set to 0x00 + */ + u32 link_layer_control:8; /* presently all reserved */ + + /** + * This field is set to true when TLR is to be enabled + */ + u32 ssp_tlr_enable:1; + + /** + * This is field specifies if the SCU DMAs a response frame to host + * memory for good response frames when operating in target mode. + */ + u32 dma_ssp_target_good_response:1; + + /** + * This field indicates if the SCU should DMA the response frame to + * host memory. + */ + u32 do_not_dma_ssp_good_response:1; + + /** + * This field is set to true when strict ordering is to be enabled + */ + u32 strict_ordering:1; + + /** + * This field indicates the type of endianess to be utilized for the + * frame. command, task, and response frames utilized control_frame + * set to 1. + */ + u32 control_frame:1; + + /** + * This field is reserved and the driver should set to 0x00 + */ + u32 tl_control_reserved:3; + + /** + * This field is set to true when the SCU hardware task timeout control is to + * be enabled + */ + u32 timeout_enable:1; + + /** + * This field is reserved and the driver should set it to 0x00 + */ + u32 pts_control_reserved:7; + + /** + * This field should be set to true when block guard is to be enabled + */ + u32 block_guard_enable:1; + + /** + * This field is reserved and the driver should set to 0x00 + */ + u32 sdma_control_reserved:7; + + /* OFFSET 0x0C */ + /** + * This field is the address modifier for this io request it should be + * programmed with the virtual function that is making the request. + */ + u32 address_modifier:16; + + /** + * @todo What we support mirrored SMP response frame? + */ + u32 mirrored_protocol_engine:3; /* mirrored protocol Engine Index */ + + /** + * If this is a mirrored request the logical port index for the mirrored RNi + * must be programmed. + */ + u32 mirrored_logical_port:4; /* mirrored local port index */ + + /** + * This field is reserved and the driver must set it to 0x00 + */ + u32 reserved_0C_0:8; + + /** + * This field must be set to true if the mirrored request processing is to be + * enabled. + */ + u32 mirror_request_enable:1; /* Mirrored request Enable */ + + /* OFFSET 0x10 */ + /** + * This field is the command iu length in dwords + */ + u32 ssp_command_iu_length:8; + + /** + * This is the target TLR enable bit it must be set to 0 when creatning the + * task context. + */ + u32 xfer_ready_tlr_enable:1; + + /** + * This field is reserved and the driver must set it to 0x00 + */ + u32 reserved_10_0:7; + + /** + * This is the maximum burst size that the SCU hardware will send in one + * connection its value is (N x 512) and N must be a multiple of 2. If the + * value is 0x00 then maximum burst size is disabled. + */ + u32 ssp_max_burst_size:16; + + /* OFFSET 0x14 */ + /** + * This filed is set to the number of bytes to be transfered in the request. + */ + u32 transfer_length_bytes:24; /* In terms of bytes */ + + /** + * This field is reserved and the driver should set it to 0x00 + */ + u32 reserved_14_0:8; + + /* OFFSET 0x18-0x2C */ + /** + * This union provides for the protocol specif part of the SCU Task Context. + */ + union protocol_context type; + + /* OFFSET 0x30-0x34 */ + /** + * This field is the upper 32 bits of the 64 bit physical address of the + * command iu buffer + */ + u32 command_iu_upper; + + /** + * This field is the lower 32 bits of the 64 bit physical address of the + * command iu buffer + */ + u32 command_iu_lower; + + /* OFFSET 0x38-0x3C */ + /** + * This field is the upper 32 bits of the 64 bit physical address of the + * response iu buffer + */ + u32 response_iu_upper; + + /** + * This field is the lower 32 bits of the 64 bit physical address of the + * response iu buffer + */ + u32 response_iu_lower; + + /* OFFSET 0x40 */ + /** + * This field is set to the task phase of the SCU hardware. The driver must + * set this to 0x01 + */ + u32 task_phase:8; + + /** + * This field is set to the transport layer task status. The driver must set + * this to 0x00 + */ + u32 task_status:8; + + /** + * This field is used during initiator write TLR + */ + u32 previous_extended_tag:4; + + /** + * This field is set the maximum number of retries for a STP non-data FIS + */ + u32 stp_retry_count:2; + + /** + * This field is reserved and the driver must set it to 0x00 + */ + u32 reserved_40_1:2; + + /** + * This field is used by the SCU TL to determine when to take a snapshot when + * tranmitting read data frames. + * - 0x00 The entire IO + * - 0x01 32k + * - 0x02 64k + * - 0x04 128k + * - 0x08 256k + */ + u32 ssp_tlr_threshold:4; + + /** + * This field is reserved and the driver must set it to 0x00 + */ + u32 reserved_40_2:4; + + /* OFFSET 0x44 */ + u32 write_data_length; /* read only set to 0 */ + + /* OFFSET 0x48-0x58 */ + struct transport_snapshot snapshot; /* read only set to 0 */ + + /* OFFSET 0x5C */ + u32 block_protection_enable:1; + u32 block_size:2; + u32 block_protection_function:2; + u32 reserved_5C_0:9; + u32 active_sgl_element:2; /* read only set to 0 */ + u32 sgl_exhausted:1; /* read only set to 0 */ + u32 payload_data_transfer_error:4; /* read only set to 0 */ + u32 frame_buffer_offset:11; /* read only set to 0 */ + + /* OFFSET 0x60-0x7C */ + /** + * This field is the first SGL element pair found in the TC data structure. + */ + struct scu_sgl_element_pair sgl_pair_ab; + /* OFFSET 0x80-0x9C */ + /** + * This field is the second SGL element pair found in the TC data structure. + */ + struct scu_sgl_element_pair sgl_pair_cd; + + /* OFFSET 0xA0-BC */ + struct scu_sgl_element_pair sgl_snapshot_ac; + + /* OFFSET 0xC0 */ + u32 active_sgl_element_pair; /* read only set to 0 */ + + /* OFFSET 0xC4-0xCC */ + u32 reserved_C4_CC[3]; + + /* OFFSET 0xD0 */ + u32 intermediate_crc_value:16; + u32 initial_crc_seed:16; + + /* OFFSET 0xD4 */ + u32 application_tag_for_verify:16; + u32 application_tag_for_generate:16; + + /* OFFSET 0xD8 */ + u32 reference_tag_seed_for_verify_function; + + /* OFFSET 0xDC */ + u32 reserved_DC; + + /* OFFSET 0xE0 */ + u32 reserved_E0_0:16; + u32 application_tag_mask_for_generate:16; + + /* OFFSET 0xE4 */ + u32 block_protection_control:16; + u32 application_tag_mask_for_verify:16; + + /* OFFSET 0xE8 */ + u32 block_protection_error:8; + u32 reserved_E8_0:24; + + /* OFFSET 0xEC */ + u32 reference_tag_seed_for_verify; + + /* OFFSET 0xF0 */ + u32 intermediate_crc_valid_snapshot:16; + u32 reserved_F0_0:16; + + /* OFFSET 0xF4 */ + u32 reference_tag_seed_for_verify_function_snapshot; + + /* OFFSET 0xF8 */ + u32 snapshot_of_reserved_dword_DC_of_tc; + + /* OFFSET 0xFC */ + u32 reference_tag_seed_for_generate_function_snapshot; + +}; + +#endif /* _SCU_TASK_CONTEXT_H_ */ diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c new file mode 100644 index 000000000000..d6bcdd013dc9 --- /dev/null +++ b/drivers/scsi/isci/task.c @@ -0,0 +1,1676 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/completion.h> +#include <linux/irqflags.h> +#include "sas.h" +#include <scsi/libsas.h> +#include "remote_device.h" +#include "remote_node_context.h" +#include "isci.h" +#include "request.h" +#include "task.h" +#include "host.h" + +/** +* isci_task_refuse() - complete the request to the upper layer driver in +* the case where an I/O needs to be completed back in the submit path. +* @ihost: host on which the the request was queued +* @task: request to complete +* @response: response code for the completed task. +* @status: status code for the completed task. +* +*/ +static void isci_task_refuse(struct isci_host *ihost, struct sas_task *task, + enum service_response response, + enum exec_status status) + +{ + enum isci_completion_selection disposition; + + disposition = isci_perform_normal_io_completion; + disposition = isci_task_set_completion_status(task, response, status, + disposition); + + /* Tasks aborted specifically by a call to the lldd_abort_task + * function should not be completed to the host in the regular path. + */ + switch (disposition) { + case isci_perform_normal_io_completion: + /* Normal notification (task_done) */ + dev_dbg(&ihost->pdev->dev, + "%s: Normal - task = %p, response=%d, " + "status=%d\n", + __func__, task, response, status); + + task->lldd_task = NULL; + + isci_execpath_callback(ihost, task, task->task_done); + break; + + case isci_perform_aborted_io_completion: + /* + * No notification because this request is already in the + * abort path. + */ + dev_dbg(&ihost->pdev->dev, + "%s: Aborted - task = %p, response=%d, " + "status=%d\n", + __func__, task, response, status); + break; + + case isci_perform_error_io_completion: + /* Use sas_task_abort */ + dev_dbg(&ihost->pdev->dev, + "%s: Error - task = %p, response=%d, " + "status=%d\n", + __func__, task, response, status); + + isci_execpath_callback(ihost, task, sas_task_abort); + break; + + default: + dev_dbg(&ihost->pdev->dev, + "%s: isci task notification default case!", + __func__); + sas_task_abort(task); + break; + } +} + +#define for_each_sas_task(num, task) \ + for (; num > 0; num--,\ + task = list_entry(task->list.next, struct sas_task, list)) + + +static inline int isci_device_io_ready(struct isci_remote_device *idev, + struct sas_task *task) +{ + return idev ? test_bit(IDEV_IO_READY, &idev->flags) || + (test_bit(IDEV_IO_NCQERROR, &idev->flags) && + isci_task_is_ncq_recovery(task)) + : 0; +} +/** + * isci_task_execute_task() - This function is one of the SAS Domain Template + * functions. This function is called by libsas to send a task down to + * hardware. + * @task: This parameter specifies the SAS task to send. + * @num: This parameter specifies the number of tasks to queue. + * @gfp_flags: This parameter specifies the context of this call. + * + * status, zero indicates success. + */ +int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) +{ + struct isci_host *ihost = dev_to_ihost(task->dev); + struct isci_remote_device *idev; + unsigned long flags; + bool io_ready; + u16 tag; + + dev_dbg(&ihost->pdev->dev, "%s: num=%d\n", __func__, num); + + for_each_sas_task(num, task) { + enum sci_status status = SCI_FAILURE; + + spin_lock_irqsave(&ihost->scic_lock, flags); + idev = isci_lookup_device(task->dev); + io_ready = isci_device_io_ready(idev, task); + tag = isci_alloc_tag(ihost); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + dev_dbg(&ihost->pdev->dev, + "task: %p, num: %d dev: %p idev: %p:%#lx cmd = %p\n", + task, num, task->dev, idev, idev ? idev->flags : 0, + task->uldd_task); + + if (!idev) { + isci_task_refuse(ihost, task, SAS_TASK_UNDELIVERED, + SAS_DEVICE_UNKNOWN); + } else if (!io_ready || tag == SCI_CONTROLLER_INVALID_IO_TAG) { + /* Indicate QUEUE_FULL so that the scsi midlayer + * retries. + */ + isci_task_refuse(ihost, task, SAS_TASK_COMPLETE, + SAS_QUEUE_FULL); + } else { + /* There is a device and it's ready for I/O. */ + spin_lock_irqsave(&task->task_state_lock, flags); + + if (task->task_state_flags & SAS_TASK_STATE_ABORTED) { + /* The I/O was aborted. */ + spin_unlock_irqrestore(&task->task_state_lock, + flags); + + isci_task_refuse(ihost, task, + SAS_TASK_UNDELIVERED, + SAM_STAT_TASK_ABORTED); + } else { + task->task_state_flags |= SAS_TASK_AT_INITIATOR; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + /* build and send the request. */ + status = isci_request_execute(ihost, idev, task, tag); + + if (status != SCI_SUCCESS) { + + spin_lock_irqsave(&task->task_state_lock, flags); + /* Did not really start this command. */ + task->task_state_flags &= ~SAS_TASK_AT_INITIATOR; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + /* Indicate QUEUE_FULL so that the scsi + * midlayer retries. if the request + * failed for remote device reasons, + * it gets returned as + * SAS_TASK_UNDELIVERED next time + * through. + */ + isci_task_refuse(ihost, task, + SAS_TASK_COMPLETE, + SAS_QUEUE_FULL); + } + } + } + if (status != SCI_SUCCESS && tag != SCI_CONTROLLER_INVALID_IO_TAG) { + spin_lock_irqsave(&ihost->scic_lock, flags); + /* command never hit the device, so just free + * the tci and skip the sequence increment + */ + isci_tci_free(ihost, ISCI_TAG_TCI(tag)); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + } + isci_put_device(idev); + } + return 0; +} + +static enum sci_status isci_sata_management_task_request_build(struct isci_request *ireq) +{ + struct isci_tmf *isci_tmf; + enum sci_status status; + + if (tmf_task != ireq->ttype) + return SCI_FAILURE; + + isci_tmf = isci_request_access_tmf(ireq); + + switch (isci_tmf->tmf_code) { + + case isci_tmf_sata_srst_high: + case isci_tmf_sata_srst_low: { + struct host_to_dev_fis *fis = &ireq->stp.cmd; + + memset(fis, 0, sizeof(*fis)); + + fis->fis_type = 0x27; + fis->flags &= ~0x80; + fis->flags &= 0xF0; + if (isci_tmf->tmf_code == isci_tmf_sata_srst_high) + fis->control |= ATA_SRST; + else + fis->control &= ~ATA_SRST; + break; + } + /* other management commnd go here... */ + default: + return SCI_FAILURE; + } + + /* core builds the protocol specific request + * based on the h2d fis. + */ + status = sci_task_request_construct_sata(ireq); + + return status; +} + +static struct isci_request *isci_task_request_build(struct isci_host *ihost, + struct isci_remote_device *idev, + u16 tag, struct isci_tmf *isci_tmf) +{ + enum sci_status status = SCI_FAILURE; + struct isci_request *ireq = NULL; + struct domain_device *dev; + + dev_dbg(&ihost->pdev->dev, + "%s: isci_tmf = %p\n", __func__, isci_tmf); + + dev = idev->domain_dev; + + /* do common allocation and init of request object. */ + ireq = isci_tmf_request_from_tag(ihost, isci_tmf, tag); + if (!ireq) + return NULL; + + /* let the core do it's construct. */ + status = sci_task_request_construct(ihost, idev, tag, + ireq); + + if (status != SCI_SUCCESS) { + dev_warn(&ihost->pdev->dev, + "%s: sci_task_request_construct failed - " + "status = 0x%x\n", + __func__, + status); + return NULL; + } + + /* XXX convert to get this from task->tproto like other drivers */ + if (dev->dev_type == SAS_END_DEV) { + isci_tmf->proto = SAS_PROTOCOL_SSP; + status = sci_task_request_construct_ssp(ireq); + if (status != SCI_SUCCESS) + return NULL; + } + + if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { + isci_tmf->proto = SAS_PROTOCOL_SATA; + status = isci_sata_management_task_request_build(ireq); + + if (status != SCI_SUCCESS) + return NULL; + } + return ireq; +} + +static int isci_task_execute_tmf(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_tmf *tmf, unsigned long timeout_ms) +{ + DECLARE_COMPLETION_ONSTACK(completion); + enum sci_task_status status = SCI_TASK_FAILURE; + struct isci_request *ireq; + int ret = TMF_RESP_FUNC_FAILED; + unsigned long flags; + unsigned long timeleft; + u16 tag; + + spin_lock_irqsave(&ihost->scic_lock, flags); + tag = isci_alloc_tag(ihost); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + if (tag == SCI_CONTROLLER_INVALID_IO_TAG) + return ret; + + /* sanity check, return TMF_RESP_FUNC_FAILED + * if the device is not there and ready. + */ + if (!idev || + (!test_bit(IDEV_IO_READY, &idev->flags) && + !test_bit(IDEV_IO_NCQERROR, &idev->flags))) { + dev_dbg(&ihost->pdev->dev, + "%s: idev = %p not ready (%#lx)\n", + __func__, + idev, idev ? idev->flags : 0); + goto err_tci; + } else + dev_dbg(&ihost->pdev->dev, + "%s: idev = %p\n", + __func__, idev); + + /* Assign the pointer to the TMF's completion kernel wait structure. */ + tmf->complete = &completion; + + ireq = isci_task_request_build(ihost, idev, tag, tmf); + if (!ireq) + goto err_tci; + + spin_lock_irqsave(&ihost->scic_lock, flags); + + /* start the TMF io. */ + status = sci_controller_start_task(ihost, idev, ireq); + + if (status != SCI_TASK_SUCCESS) { + dev_dbg(&ihost->pdev->dev, + "%s: start_io failed - status = 0x%x, request = %p\n", + __func__, + status, + ireq); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + goto err_tci; + } + + if (tmf->cb_state_func != NULL) + tmf->cb_state_func(isci_tmf_started, tmf, tmf->cb_data); + + isci_request_change_state(ireq, started); + + /* add the request to the remote device request list. */ + list_add(&ireq->dev_node, &idev->reqs_in_process); + + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + /* Wait for the TMF to complete, or a timeout. */ + timeleft = wait_for_completion_timeout(&completion, + msecs_to_jiffies(timeout_ms)); + + if (timeleft == 0) { + spin_lock_irqsave(&ihost->scic_lock, flags); + + if (tmf->cb_state_func != NULL) + tmf->cb_state_func(isci_tmf_timed_out, tmf, tmf->cb_data); + + sci_controller_terminate_request(ihost, + idev, + ireq); + + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + wait_for_completion(tmf->complete); + } + + isci_print_tmf(tmf); + + if (tmf->status == SCI_SUCCESS) + ret = TMF_RESP_FUNC_COMPLETE; + else if (tmf->status == SCI_FAILURE_IO_RESPONSE_VALID) { + dev_dbg(&ihost->pdev->dev, + "%s: tmf.status == " + "SCI_FAILURE_IO_RESPONSE_VALID\n", + __func__); + ret = TMF_RESP_FUNC_COMPLETE; + } + /* Else - leave the default "failed" status alone. */ + + dev_dbg(&ihost->pdev->dev, + "%s: completed request = %p\n", + __func__, + ireq); + + return ret; + + err_tci: + spin_lock_irqsave(&ihost->scic_lock, flags); + isci_tci_free(ihost, ISCI_TAG_TCI(tag)); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + return ret; +} + +static void isci_task_build_tmf(struct isci_tmf *tmf, + enum isci_tmf_function_codes code, + void (*tmf_sent_cb)(enum isci_tmf_cb_state, + struct isci_tmf *, + void *), + void *cb_data) +{ + memset(tmf, 0, sizeof(*tmf)); + + tmf->tmf_code = code; + tmf->cb_state_func = tmf_sent_cb; + tmf->cb_data = cb_data; +} + +static void isci_task_build_abort_task_tmf(struct isci_tmf *tmf, + enum isci_tmf_function_codes code, + void (*tmf_sent_cb)(enum isci_tmf_cb_state, + struct isci_tmf *, + void *), + struct isci_request *old_request) +{ + isci_task_build_tmf(tmf, code, tmf_sent_cb, old_request); + tmf->io_tag = old_request->io_tag; +} + +/** + * isci_task_validate_request_to_abort() - This function checks the given I/O + * against the "started" state. If the request is still "started", it's + * state is changed to aborted. NOTE: isci_host->scic_lock MUST BE HELD + * BEFORE CALLING THIS FUNCTION. + * @isci_request: This parameter specifies the request object to control. + * @isci_host: This parameter specifies the ISCI host object + * @isci_device: This is the device to which the request is pending. + * @aborted_io_completion: This is a completion structure that will be added to + * the request in case it is changed to aborting; this completion is + * triggered when the request is fully completed. + * + * Either "started" on successful change of the task status to "aborted", or + * "unallocated" if the task cannot be controlled. + */ +static enum isci_request_status isci_task_validate_request_to_abort( + struct isci_request *isci_request, + struct isci_host *isci_host, + struct isci_remote_device *isci_device, + struct completion *aborted_io_completion) +{ + enum isci_request_status old_state = unallocated; + + /* Only abort the task if it's in the + * device's request_in_process list + */ + if (isci_request && !list_empty(&isci_request->dev_node)) { + old_state = isci_request_change_started_to_aborted( + isci_request, aborted_io_completion); + + } + + return old_state; +} + +/** +* isci_request_cleanup_completed_loiterer() - This function will take care of +* the final cleanup on any request which has been explicitly terminated. +* @isci_host: This parameter specifies the ISCI host object +* @isci_device: This is the device to which the request is pending. +* @isci_request: This parameter specifies the terminated request object. +* @task: This parameter is the libsas I/O request. +*/ +static void isci_request_cleanup_completed_loiterer( + struct isci_host *isci_host, + struct isci_remote_device *isci_device, + struct isci_request *isci_request, + struct sas_task *task) +{ + unsigned long flags; + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_device=%p, request=%p, task=%p\n", + __func__, isci_device, isci_request, task); + + if (task != NULL) { + + spin_lock_irqsave(&task->task_state_lock, flags); + task->lldd_task = NULL; + + task->task_state_flags &= ~SAS_TASK_NEED_DEV_RESET; + + isci_set_task_doneflags(task); + + /* If this task is not in the abort path, call task_done. */ + if (!(task->task_state_flags & SAS_TASK_STATE_ABORTED)) { + + spin_unlock_irqrestore(&task->task_state_lock, flags); + task->task_done(task); + } else + spin_unlock_irqrestore(&task->task_state_lock, flags); + } + + if (isci_request != NULL) { + spin_lock_irqsave(&isci_host->scic_lock, flags); + list_del_init(&isci_request->dev_node); + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + } +} + +/** + * isci_terminate_request_core() - This function will terminate the given + * request, and wait for it to complete. This function must only be called + * from a thread that can wait. Note that the request is terminated and + * completed (back to the host, if started there). + * @ihost: This SCU. + * @idev: The target. + * @isci_request: The I/O request to be terminated. + * + */ +static void isci_terminate_request_core(struct isci_host *ihost, + struct isci_remote_device *idev, + struct isci_request *isci_request) +{ + enum sci_status status = SCI_SUCCESS; + bool was_terminated = false; + bool needs_cleanup_handling = false; + enum isci_request_status request_status; + unsigned long flags; + unsigned long termination_completed = 1; + struct completion *io_request_completion; + struct sas_task *task; + + dev_dbg(&ihost->pdev->dev, + "%s: device = %p; request = %p\n", + __func__, idev, isci_request); + + spin_lock_irqsave(&ihost->scic_lock, flags); + + io_request_completion = isci_request->io_request_completion; + + task = (isci_request->ttype == io_task) + ? isci_request_access_task(isci_request) + : NULL; + + /* Note that we are not going to control + * the target to abort the request. + */ + set_bit(IREQ_COMPLETE_IN_TARGET, &isci_request->flags); + + /* Make sure the request wasn't just sitting around signalling + * device condition (if the request handle is NULL, then the + * request completed but needed additional handling here). + */ + if (!test_bit(IREQ_TERMINATED, &isci_request->flags)) { + was_terminated = true; + needs_cleanup_handling = true; + status = sci_controller_terminate_request(ihost, + idev, + isci_request); + } + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + /* + * The only time the request to terminate will + * fail is when the io request is completed and + * being aborted. + */ + if (status != SCI_SUCCESS) { + dev_dbg(&ihost->pdev->dev, + "%s: sci_controller_terminate_request" + " returned = 0x%x\n", + __func__, status); + + isci_request->io_request_completion = NULL; + + } else { + if (was_terminated) { + dev_dbg(&ihost->pdev->dev, + "%s: before completion wait (%p/%p)\n", + __func__, isci_request, io_request_completion); + + /* Wait here for the request to complete. */ + #define TERMINATION_TIMEOUT_MSEC 500 + termination_completed + = wait_for_completion_timeout( + io_request_completion, + msecs_to_jiffies(TERMINATION_TIMEOUT_MSEC)); + + if (!termination_completed) { + + /* The request to terminate has timed out. */ + spin_lock_irqsave(&ihost->scic_lock, + flags); + + /* Check for state changes. */ + if (!test_bit(IREQ_TERMINATED, &isci_request->flags)) { + + /* The best we can do is to have the + * request die a silent death if it + * ever really completes. + * + * Set the request state to "dead", + * and clear the task pointer so that + * an actual completion event callback + * doesn't do anything. + */ + isci_request->status = dead; + isci_request->io_request_completion + = NULL; + + if (isci_request->ttype == io_task) { + + /* Break links with the + * sas_task. + */ + isci_request->ttype_ptr.io_task_ptr + = NULL; + } + } else + termination_completed = 1; + + spin_unlock_irqrestore(&ihost->scic_lock, + flags); + + if (!termination_completed) { + + dev_dbg(&ihost->pdev->dev, + "%s: *** Timeout waiting for " + "termination(%p/%p)\n", + __func__, io_request_completion, + isci_request); + + /* The request can no longer be referenced + * safely since it may go away if the + * termination every really does complete. + */ + isci_request = NULL; + } + } + if (termination_completed) + dev_dbg(&ihost->pdev->dev, + "%s: after completion wait (%p/%p)\n", + __func__, isci_request, io_request_completion); + } + + if (termination_completed) { + + isci_request->io_request_completion = NULL; + + /* Peek at the status of the request. This will tell + * us if there was special handling on the request such that it + * needs to be detached and freed here. + */ + spin_lock_irqsave(&isci_request->state_lock, flags); + request_status = isci_request->status; + + if ((isci_request->ttype == io_task) /* TMFs are in their own thread */ + && ((request_status == aborted) + || (request_status == aborting) + || (request_status == terminating) + || (request_status == completed) + || (request_status == dead) + ) + ) { + + /* The completion routine won't free a request in + * the aborted/aborting/etc. states, so we do + * it here. + */ + needs_cleanup_handling = true; + } + spin_unlock_irqrestore(&isci_request->state_lock, flags); + + } + if (needs_cleanup_handling) + isci_request_cleanup_completed_loiterer( + ihost, idev, isci_request, task); + } +} + +/** + * isci_terminate_pending_requests() - This function will change the all of the + * requests on the given device's state to "aborting", will terminate the + * requests, and wait for them to complete. This function must only be + * called from a thread that can wait. Note that the requests are all + * terminated and completed (back to the host, if started there). + * @isci_host: This parameter specifies SCU. + * @idev: This parameter specifies the target. + * + */ +void isci_terminate_pending_requests(struct isci_host *ihost, + struct isci_remote_device *idev) +{ + struct completion request_completion; + enum isci_request_status old_state; + unsigned long flags; + LIST_HEAD(list); + + spin_lock_irqsave(&ihost->scic_lock, flags); + list_splice_init(&idev->reqs_in_process, &list); + + /* assumes that isci_terminate_request_core deletes from the list */ + while (!list_empty(&list)) { + struct isci_request *ireq = list_entry(list.next, typeof(*ireq), dev_node); + + /* Change state to "terminating" if it is currently + * "started". + */ + old_state = isci_request_change_started_to_newstate(ireq, + &request_completion, + terminating); + switch (old_state) { + case started: + case completed: + case aborting: + break; + default: + /* termination in progress, or otherwise dispositioned. + * We know the request was on 'list' so should be safe + * to move it back to reqs_in_process + */ + list_move(&ireq->dev_node, &idev->reqs_in_process); + ireq = NULL; + break; + } + + if (!ireq) + continue; + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + init_completion(&request_completion); + + dev_dbg(&ihost->pdev->dev, + "%s: idev=%p request=%p; task=%p old_state=%d\n", + __func__, idev, ireq, + ireq->ttype == io_task ? isci_request_access_task(ireq) : NULL, + old_state); + + /* If the old_state is started: + * This request was not already being aborted. If it had been, + * then the aborting I/O (ie. the TMF request) would not be in + * the aborting state, and thus would be terminated here. Note + * that since the TMF completion's call to the kernel function + * "complete()" does not happen until the pending I/O request + * terminate fully completes, we do not have to implement a + * special wait here for already aborting requests - the + * termination of the TMF request will force the request + * to finish it's already started terminate. + * + * If old_state == completed: + * This request completed from the SCU hardware perspective + * and now just needs cleaning up in terms of freeing the + * request and potentially calling up to libsas. + * + * If old_state == aborting: + * This request has already gone through a TMF timeout, but may + * not have been terminated; needs cleaning up at least. + */ + isci_terminate_request_core(ihost, idev, ireq); + spin_lock_irqsave(&ihost->scic_lock, flags); + } + spin_unlock_irqrestore(&ihost->scic_lock, flags); +} + +/** + * isci_task_send_lu_reset_sas() - This function is called by of the SAS Domain + * Template functions. + * @lun: This parameter specifies the lun to be reset. + * + * status, zero indicates success. + */ +static int isci_task_send_lu_reset_sas( + struct isci_host *isci_host, + struct isci_remote_device *isci_device, + u8 *lun) +{ + struct isci_tmf tmf; + int ret = TMF_RESP_FUNC_FAILED; + + dev_dbg(&isci_host->pdev->dev, + "%s: isci_host = %p, isci_device = %p\n", + __func__, isci_host, isci_device); + /* Send the LUN reset to the target. By the time the call returns, + * the TMF has fully exected in the target (in which case the return + * value is "TMF_RESP_FUNC_COMPLETE", or the request timed-out (or + * was otherwise unable to be executed ("TMF_RESP_FUNC_FAILED"). + */ + isci_task_build_tmf(&tmf, isci_tmf_ssp_lun_reset, NULL, NULL); + + #define ISCI_LU_RESET_TIMEOUT_MS 2000 /* 2 second timeout. */ + ret = isci_task_execute_tmf(isci_host, isci_device, &tmf, ISCI_LU_RESET_TIMEOUT_MS); + + if (ret == TMF_RESP_FUNC_COMPLETE) + dev_dbg(&isci_host->pdev->dev, + "%s: %p: TMF_LU_RESET passed\n", + __func__, isci_device); + else + dev_dbg(&isci_host->pdev->dev, + "%s: %p: TMF_LU_RESET failed (%x)\n", + __func__, isci_device, ret); + + return ret; +} + +static int isci_task_send_lu_reset_sata(struct isci_host *ihost, + struct isci_remote_device *idev, u8 *lun) +{ + int ret = TMF_RESP_FUNC_FAILED; + struct isci_tmf tmf; + + /* Send the soft reset to the target */ + #define ISCI_SRST_TIMEOUT_MS 25000 /* 25 second timeout. */ + isci_task_build_tmf(&tmf, isci_tmf_sata_srst_high, NULL, NULL); + + ret = isci_task_execute_tmf(ihost, idev, &tmf, ISCI_SRST_TIMEOUT_MS); + + if (ret != TMF_RESP_FUNC_COMPLETE) { + dev_dbg(&ihost->pdev->dev, + "%s: Assert SRST failed (%p) = %x", + __func__, idev, ret); + + /* Return the failure so that the LUN reset is escalated + * to a target reset. + */ + } + return ret; +} + +/** + * isci_task_lu_reset() - This function is one of the SAS Domain Template + * functions. This is one of the Task Management functoins called by libsas, + * to reset the given lun. Note the assumption that while this call is + * executing, no I/O will be sent by the host to the device. + * @lun: This parameter specifies the lun to be reset. + * + * status, zero indicates success. + */ +int isci_task_lu_reset(struct domain_device *domain_device, u8 *lun) +{ + struct isci_host *isci_host = dev_to_ihost(domain_device); + struct isci_remote_device *isci_device; + unsigned long flags; + int ret; + + spin_lock_irqsave(&isci_host->scic_lock, flags); + isci_device = isci_lookup_device(domain_device); + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + dev_dbg(&isci_host->pdev->dev, + "%s: domain_device=%p, isci_host=%p; isci_device=%p\n", + __func__, domain_device, isci_host, isci_device); + + if (isci_device) + set_bit(IDEV_EH, &isci_device->flags); + + /* If there is a device reset pending on any request in the + * device's list, fail this LUN reset request in order to + * escalate to the device reset. + */ + if (!isci_device || + isci_device_is_reset_pending(isci_host, isci_device)) { + dev_dbg(&isci_host->pdev->dev, + "%s: No dev (%p), or " + "RESET PENDING: domain_device=%p\n", + __func__, isci_device, domain_device); + ret = TMF_RESP_FUNC_FAILED; + goto out; + } + + /* Send the task management part of the reset. */ + if (sas_protocol_ata(domain_device->tproto)) { + ret = isci_task_send_lu_reset_sata(isci_host, isci_device, lun); + } else + ret = isci_task_send_lu_reset_sas(isci_host, isci_device, lun); + + /* If the LUN reset worked, all the I/O can now be terminated. */ + if (ret == TMF_RESP_FUNC_COMPLETE) + /* Terminate all I/O now. */ + isci_terminate_pending_requests(isci_host, + isci_device); + + out: + isci_put_device(isci_device); + return ret; +} + + +/* int (*lldd_clear_nexus_port)(struct asd_sas_port *); */ +int isci_task_clear_nexus_port(struct asd_sas_port *port) +{ + return TMF_RESP_FUNC_FAILED; +} + + + +int isci_task_clear_nexus_ha(struct sas_ha_struct *ha) +{ + return TMF_RESP_FUNC_FAILED; +} + +/* Task Management Functions. Must be called from process context. */ + +/** + * isci_abort_task_process_cb() - This is a helper function for the abort task + * TMF command. It manages the request state with respect to the successful + * transmission / completion of the abort task request. + * @cb_state: This parameter specifies when this function was called - after + * the TMF request has been started and after it has timed-out. + * @tmf: This parameter specifies the TMF in progress. + * + * + */ +static void isci_abort_task_process_cb( + enum isci_tmf_cb_state cb_state, + struct isci_tmf *tmf, + void *cb_data) +{ + struct isci_request *old_request; + + old_request = (struct isci_request *)cb_data; + + dev_dbg(&old_request->isci_host->pdev->dev, + "%s: tmf=%p, old_request=%p\n", + __func__, tmf, old_request); + + switch (cb_state) { + + case isci_tmf_started: + /* The TMF has been started. Nothing to do here, since the + * request state was already set to "aborted" by the abort + * task function. + */ + if ((old_request->status != aborted) + && (old_request->status != completed)) + dev_dbg(&old_request->isci_host->pdev->dev, + "%s: Bad request status (%d): tmf=%p, old_request=%p\n", + __func__, old_request->status, tmf, old_request); + break; + + case isci_tmf_timed_out: + + /* Set the task's state to "aborting", since the abort task + * function thread set it to "aborted" (above) in anticipation + * of the task management request working correctly. Since the + * timeout has now fired, the TMF request failed. We set the + * state such that the request completion will indicate the + * device is no longer present. + */ + isci_request_change_state(old_request, aborting); + break; + + default: + dev_dbg(&old_request->isci_host->pdev->dev, + "%s: Bad cb_state (%d): tmf=%p, old_request=%p\n", + __func__, cb_state, tmf, old_request); + break; + } +} + +/** + * isci_task_abort_task() - This function is one of the SAS Domain Template + * functions. This function is called by libsas to abort a specified task. + * @task: This parameter specifies the SAS task to abort. + * + * status, zero indicates success. + */ +int isci_task_abort_task(struct sas_task *task) +{ + struct isci_host *isci_host = dev_to_ihost(task->dev); + DECLARE_COMPLETION_ONSTACK(aborted_io_completion); + struct isci_request *old_request = NULL; + enum isci_request_status old_state; + struct isci_remote_device *isci_device = NULL; + struct isci_tmf tmf; + int ret = TMF_RESP_FUNC_FAILED; + unsigned long flags; + bool any_dev_reset = false; + + /* Get the isci_request reference from the task. Note that + * this check does not depend on the pending request list + * in the device, because tasks driving resets may land here + * after completion in the core. + */ + spin_lock_irqsave(&isci_host->scic_lock, flags); + spin_lock(&task->task_state_lock); + + old_request = task->lldd_task; + + /* If task is already done, the request isn't valid */ + if (!(task->task_state_flags & SAS_TASK_STATE_DONE) && + (task->task_state_flags & SAS_TASK_AT_INITIATOR) && + old_request) + isci_device = isci_lookup_device(task->dev); + + spin_unlock(&task->task_state_lock); + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + dev_dbg(&isci_host->pdev->dev, + "%s: task = %p\n", __func__, task); + + if (!isci_device || !old_request) + goto out; + + set_bit(IDEV_EH, &isci_device->flags); + + /* This version of the driver will fail abort requests for + * SATA/STP. Failing the abort request this way will cause the + * SCSI error handler thread to escalate to LUN reset + */ + if (sas_protocol_ata(task->task_proto)) { + dev_dbg(&isci_host->pdev->dev, + " task %p is for a STP/SATA device;" + " returning TMF_RESP_FUNC_FAILED\n" + " to cause a LUN reset...\n", task); + goto out; + } + + dev_dbg(&isci_host->pdev->dev, + "%s: old_request == %p\n", __func__, old_request); + + any_dev_reset = isci_device_is_reset_pending(isci_host, isci_device); + + spin_lock_irqsave(&task->task_state_lock, flags); + + any_dev_reset = any_dev_reset || (task->task_state_flags & SAS_TASK_NEED_DEV_RESET); + + /* If the extraction of the request reference from the task + * failed, then the request has been completed (or if there is a + * pending reset then this abort request function must be failed + * in order to escalate to the target reset). + */ + if ((old_request == NULL) || any_dev_reset) { + + /* If the device reset task flag is set, fail the task + * management request. Otherwise, the original request + * has completed. + */ + if (any_dev_reset) { + + /* Turn off the task's DONE to make sure this + * task is escalated to a target reset. + */ + task->task_state_flags &= ~SAS_TASK_STATE_DONE; + + /* Make the reset happen as soon as possible. */ + task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; + + spin_unlock_irqrestore(&task->task_state_lock, flags); + + /* Fail the task management request in order to + * escalate to the target reset. + */ + ret = TMF_RESP_FUNC_FAILED; + + dev_dbg(&isci_host->pdev->dev, + "%s: Failing task abort in order to " + "escalate to target reset because\n" + "SAS_TASK_NEED_DEV_RESET is set for " + "task %p on dev %p\n", + __func__, task, isci_device); + + + } else { + /* The request has already completed and there + * is nothing to do here other than to set the task + * done bit, and indicate that the task abort function + * was sucessful. + */ + isci_set_task_doneflags(task); + + spin_unlock_irqrestore(&task->task_state_lock, flags); + + ret = TMF_RESP_FUNC_COMPLETE; + + dev_dbg(&isci_host->pdev->dev, + "%s: abort task not needed for %p\n", + __func__, task); + } + goto out; + } else { + spin_unlock_irqrestore(&task->task_state_lock, flags); + } + + spin_lock_irqsave(&isci_host->scic_lock, flags); + + /* Check the request status and change to "aborted" if currently + * "starting"; if true then set the I/O kernel completion + * struct that will be triggered when the request completes. + */ + old_state = isci_task_validate_request_to_abort( + old_request, isci_host, isci_device, + &aborted_io_completion); + if ((old_state != started) && + (old_state != completed) && + (old_state != aborting)) { + + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + /* The request was already being handled by someone else (because + * they got to set the state away from started). + */ + dev_dbg(&isci_host->pdev->dev, + "%s: device = %p; old_request %p already being aborted\n", + __func__, + isci_device, old_request); + ret = TMF_RESP_FUNC_COMPLETE; + goto out; + } + if (task->task_proto == SAS_PROTOCOL_SMP || + test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags)) { + + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + dev_dbg(&isci_host->pdev->dev, + "%s: SMP request (%d)" + " or complete_in_target (%d), thus no TMF\n", + __func__, (task->task_proto == SAS_PROTOCOL_SMP), + test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags)); + + /* Set the state on the task. */ + isci_task_all_done(task); + + ret = TMF_RESP_FUNC_COMPLETE; + + /* Stopping and SMP devices are not sent a TMF, and are not + * reset, but the outstanding I/O request is terminated below. + */ + } else { + /* Fill in the tmf stucture */ + isci_task_build_abort_task_tmf(&tmf, isci_tmf_ssp_task_abort, + isci_abort_task_process_cb, + old_request); + + spin_unlock_irqrestore(&isci_host->scic_lock, flags); + + #define ISCI_ABORT_TASK_TIMEOUT_MS 500 /* half second timeout. */ + ret = isci_task_execute_tmf(isci_host, isci_device, &tmf, + ISCI_ABORT_TASK_TIMEOUT_MS); + + if (ret != TMF_RESP_FUNC_COMPLETE) + dev_dbg(&isci_host->pdev->dev, + "%s: isci_task_send_tmf failed\n", + __func__); + } + if (ret == TMF_RESP_FUNC_COMPLETE) { + set_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags); + + /* Clean up the request on our side, and wait for the aborted + * I/O to complete. + */ + isci_terminate_request_core(isci_host, isci_device, old_request); + } + + /* Make sure we do not leave a reference to aborted_io_completion */ + old_request->io_request_completion = NULL; + out: + isci_put_device(isci_device); + return ret; +} + +/** + * isci_task_abort_task_set() - This function is one of the SAS Domain Template + * functions. This is one of the Task Management functoins called by libsas, + * to abort all task for the given lun. + * @d_device: This parameter specifies the domain device associated with this + * request. + * @lun: This parameter specifies the lun associated with this request. + * + * status, zero indicates success. + */ +int isci_task_abort_task_set( + struct domain_device *d_device, + u8 *lun) +{ + return TMF_RESP_FUNC_FAILED; +} + + +/** + * isci_task_clear_aca() - This function is one of the SAS Domain Template + * functions. This is one of the Task Management functoins called by libsas. + * @d_device: This parameter specifies the domain device associated with this + * request. + * @lun: This parameter specifies the lun associated with this request. + * + * status, zero indicates success. + */ +int isci_task_clear_aca( + struct domain_device *d_device, + u8 *lun) +{ + return TMF_RESP_FUNC_FAILED; +} + + + +/** + * isci_task_clear_task_set() - This function is one of the SAS Domain Template + * functions. This is one of the Task Management functoins called by libsas. + * @d_device: This parameter specifies the domain device associated with this + * request. + * @lun: This parameter specifies the lun associated with this request. + * + * status, zero indicates success. + */ +int isci_task_clear_task_set( + struct domain_device *d_device, + u8 *lun) +{ + return TMF_RESP_FUNC_FAILED; +} + + +/** + * isci_task_query_task() - This function is implemented to cause libsas to + * correctly escalate the failed abort to a LUN or target reset (this is + * because sas_scsi_find_task libsas function does not correctly interpret + * all return codes from the abort task call). When TMF_RESP_FUNC_SUCC is + * returned, libsas turns this into a LUN reset; when FUNC_FAILED is + * returned, libsas will turn this into a target reset + * @task: This parameter specifies the sas task being queried. + * @lun: This parameter specifies the lun associated with this request. + * + * status, zero indicates success. + */ +int isci_task_query_task( + struct sas_task *task) +{ + /* See if there is a pending device reset for this device. */ + if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET) + return TMF_RESP_FUNC_FAILED; + else + return TMF_RESP_FUNC_SUCC; +} + +/* + * isci_task_request_complete() - This function is called by the sci core when + * an task request completes. + * @ihost: This parameter specifies the ISCI host object + * @ireq: This parameter is the completed isci_request object. + * @completion_status: This parameter specifies the completion status from the + * sci core. + * + * none. + */ +void +isci_task_request_complete(struct isci_host *ihost, + struct isci_request *ireq, + enum sci_task_status completion_status) +{ + struct isci_tmf *tmf = isci_request_access_tmf(ireq); + struct completion *tmf_complete; + + dev_dbg(&ihost->pdev->dev, + "%s: request = %p, status=%d\n", + __func__, ireq, completion_status); + + isci_request_change_state(ireq, completed); + + tmf->status = completion_status; + set_bit(IREQ_COMPLETE_IN_TARGET, &ireq->flags); + + if (tmf->proto == SAS_PROTOCOL_SSP) { + memcpy(&tmf->resp.resp_iu, + &ireq->ssp.rsp, + SSP_RESP_IU_MAX_SIZE); + } else if (tmf->proto == SAS_PROTOCOL_SATA) { + memcpy(&tmf->resp.d2h_fis, + &ireq->stp.rsp, + sizeof(struct dev_to_host_fis)); + } + + /* PRINT_TMF( ((struct isci_tmf *)request->task)); */ + tmf_complete = tmf->complete; + + sci_controller_complete_io(ihost, ireq->target_device, ireq); + /* set the 'terminated' flag handle to make sure it cannot be terminated + * or completed again. + */ + set_bit(IREQ_TERMINATED, &ireq->flags); + + isci_request_change_state(ireq, unallocated); + list_del_init(&ireq->dev_node); + + /* The task management part completes last. */ + complete(tmf_complete); +} + +static void isci_smp_task_timedout(unsigned long _task) +{ + struct sas_task *task = (void *) _task; + unsigned long flags; + + spin_lock_irqsave(&task->task_state_lock, flags); + if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) + task->task_state_flags |= SAS_TASK_STATE_ABORTED; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + complete(&task->completion); +} + +static void isci_smp_task_done(struct sas_task *task) +{ + if (!del_timer(&task->timer)) + return; + complete(&task->completion); +} + +static struct sas_task *isci_alloc_task(void) +{ + struct sas_task *task = kzalloc(sizeof(*task), GFP_KERNEL); + + if (task) { + INIT_LIST_HEAD(&task->list); + spin_lock_init(&task->task_state_lock); + task->task_state_flags = SAS_TASK_STATE_PENDING; + init_timer(&task->timer); + init_completion(&task->completion); + } + + return task; +} + +static void isci_free_task(struct isci_host *ihost, struct sas_task *task) +{ + if (task) { + BUG_ON(!list_empty(&task->list)); + kfree(task); + } +} + +static int isci_smp_execute_task(struct isci_host *ihost, + struct domain_device *dev, void *req, + int req_size, void *resp, int resp_size) +{ + int res, retry; + struct sas_task *task = NULL; + + for (retry = 0; retry < 3; retry++) { + task = isci_alloc_task(); + if (!task) + return -ENOMEM; + + task->dev = dev; + task->task_proto = dev->tproto; + sg_init_one(&task->smp_task.smp_req, req, req_size); + sg_init_one(&task->smp_task.smp_resp, resp, resp_size); + + task->task_done = isci_smp_task_done; + + task->timer.data = (unsigned long) task; + task->timer.function = isci_smp_task_timedout; + task->timer.expires = jiffies + 10*HZ; + add_timer(&task->timer); + + res = isci_task_execute_task(task, 1, GFP_KERNEL); + + if (res) { + del_timer(&task->timer); + dev_dbg(&ihost->pdev->dev, + "%s: executing SMP task failed:%d\n", + __func__, res); + goto ex_err; + } + + wait_for_completion(&task->completion); + res = -ECOMM; + if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) { + dev_dbg(&ihost->pdev->dev, + "%s: smp task timed out or aborted\n", + __func__); + isci_task_abort_task(task); + if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) { + dev_dbg(&ihost->pdev->dev, + "%s: SMP task aborted and not done\n", + __func__); + goto ex_err; + } + } + if (task->task_status.resp == SAS_TASK_COMPLETE && + task->task_status.stat == SAM_STAT_GOOD) { + res = 0; + break; + } + if (task->task_status.resp == SAS_TASK_COMPLETE && + task->task_status.stat == SAS_DATA_UNDERRUN) { + /* no error, but return the number of bytes of + * underrun */ + res = task->task_status.residual; + break; + } + if (task->task_status.resp == SAS_TASK_COMPLETE && + task->task_status.stat == SAS_DATA_OVERRUN) { + res = -EMSGSIZE; + break; + } else { + dev_dbg(&ihost->pdev->dev, + "%s: task to dev %016llx response: 0x%x " + "status 0x%x\n", __func__, + SAS_ADDR(dev->sas_addr), + task->task_status.resp, + task->task_status.stat); + isci_free_task(ihost, task); + task = NULL; + } + } +ex_err: + BUG_ON(retry == 3 && task != NULL); + isci_free_task(ihost, task); + return res; +} + +#define DISCOVER_REQ_SIZE 16 +#define DISCOVER_RESP_SIZE 56 + +int isci_smp_get_phy_attached_dev_type(struct isci_host *ihost, + struct domain_device *dev, + int phy_id, int *adt) +{ + struct smp_resp *disc_resp; + u8 *disc_req; + int res; + + disc_resp = kzalloc(DISCOVER_RESP_SIZE, GFP_KERNEL); + if (!disc_resp) + return -ENOMEM; + + disc_req = kzalloc(DISCOVER_REQ_SIZE, GFP_KERNEL); + if (disc_req) { + disc_req[0] = SMP_REQUEST; + disc_req[1] = SMP_DISCOVER; + disc_req[9] = phy_id; + } else { + kfree(disc_resp); + return -ENOMEM; + } + res = isci_smp_execute_task(ihost, dev, disc_req, DISCOVER_REQ_SIZE, + disc_resp, DISCOVER_RESP_SIZE); + if (!res) { + if (disc_resp->result != SMP_RESP_FUNC_ACC) + res = disc_resp->result; + else + *adt = disc_resp->disc.attached_dev_type; + } + kfree(disc_req); + kfree(disc_resp); + + return res; +} + +static void isci_wait_for_smp_phy_reset(struct isci_remote_device *idev, int phy_num) +{ + struct domain_device *dev = idev->domain_dev; + struct isci_port *iport = idev->isci_port; + struct isci_host *ihost = iport->isci_host; + int res, iteration = 0, attached_device_type; + #define STP_WAIT_MSECS 25000 + unsigned long tmo = msecs_to_jiffies(STP_WAIT_MSECS); + unsigned long deadline = jiffies + tmo; + enum { + SMP_PHYWAIT_PHYDOWN, + SMP_PHYWAIT_PHYUP, + SMP_PHYWAIT_DONE + } phy_state = SMP_PHYWAIT_PHYDOWN; + + /* While there is time, wait for the phy to go away and come back */ + while (time_is_after_jiffies(deadline) && phy_state != SMP_PHYWAIT_DONE) { + int event = atomic_read(&iport->event); + + ++iteration; + + tmo = wait_event_timeout(ihost->eventq, + event != atomic_read(&iport->event) || + !test_bit(IPORT_BCN_BLOCKED, &iport->flags), + tmo); + /* link down, stop polling */ + if (!test_bit(IPORT_BCN_BLOCKED, &iport->flags)) + break; + + dev_dbg(&ihost->pdev->dev, + "%s: iport %p, iteration %d," + " phase %d: time_remaining %lu, bcns = %d\n", + __func__, iport, iteration, phy_state, + tmo, test_bit(IPORT_BCN_PENDING, &iport->flags)); + + res = isci_smp_get_phy_attached_dev_type(ihost, dev, phy_num, + &attached_device_type); + tmo = deadline - jiffies; + + if (res) { + dev_dbg(&ihost->pdev->dev, + "%s: iteration %d, phase %d:" + " SMP error=%d, time_remaining=%lu\n", + __func__, iteration, phy_state, res, tmo); + break; + } + dev_dbg(&ihost->pdev->dev, + "%s: iport %p, iteration %d," + " phase %d: time_remaining %lu, bcns = %d, " + "attdevtype = %x\n", + __func__, iport, iteration, phy_state, + tmo, test_bit(IPORT_BCN_PENDING, &iport->flags), + attached_device_type); + + switch (phy_state) { + case SMP_PHYWAIT_PHYDOWN: + /* Has the device gone away? */ + if (!attached_device_type) + phy_state = SMP_PHYWAIT_PHYUP; + + break; + + case SMP_PHYWAIT_PHYUP: + /* Has the device come back? */ + if (attached_device_type) + phy_state = SMP_PHYWAIT_DONE; + break; + + case SMP_PHYWAIT_DONE: + break; + } + + } + dev_dbg(&ihost->pdev->dev, "%s: done\n", __func__); +} + +static int isci_reset_device(struct isci_host *ihost, + struct isci_remote_device *idev) +{ + struct sas_phy *phy = sas_find_local_phy(idev->domain_dev); + struct isci_port *iport = idev->isci_port; + enum sci_status status; + unsigned long flags; + int rc; + + dev_dbg(&ihost->pdev->dev, "%s: idev %p\n", __func__, idev); + + spin_lock_irqsave(&ihost->scic_lock, flags); + status = sci_remote_device_reset(idev); + if (status != SCI_SUCCESS) { + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + dev_dbg(&ihost->pdev->dev, + "%s: sci_remote_device_reset(%p) returned %d!\n", + __func__, idev, status); + + return TMF_RESP_FUNC_FAILED; + } + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + /* Make sure all pending requests are able to be fully terminated. */ + isci_device_clear_reset_pending(ihost, idev); + + /* If this is a device on an expander, disable BCN processing. */ + if (!scsi_is_sas_phy_local(phy)) + set_bit(IPORT_BCN_BLOCKED, &iport->flags); + + rc = sas_phy_reset(phy, true); + + /* Terminate in-progress I/O now. */ + isci_remote_device_nuke_requests(ihost, idev); + + /* Since all pending TCs have been cleaned, resume the RNC. */ + spin_lock_irqsave(&ihost->scic_lock, flags); + status = sci_remote_device_reset_complete(idev); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + /* If this is a device on an expander, bring the phy back up. */ + if (!scsi_is_sas_phy_local(phy)) { + /* A phy reset will cause the device to go away then reappear. + * Since libsas will take action on incoming BCNs (eg. remove + * a device going through an SMP phy-control driven reset), + * we need to wait until the phy comes back up before letting + * discovery proceed in libsas. + */ + isci_wait_for_smp_phy_reset(idev, phy->number); + + spin_lock_irqsave(&ihost->scic_lock, flags); + isci_port_bcn_enable(ihost, idev->isci_port); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + } + + if (status != SCI_SUCCESS) { + dev_dbg(&ihost->pdev->dev, + "%s: sci_remote_device_reset_complete(%p) " + "returned %d!\n", __func__, idev, status); + } + + dev_dbg(&ihost->pdev->dev, "%s: idev %p complete.\n", __func__, idev); + + return rc; +} + +int isci_task_I_T_nexus_reset(struct domain_device *dev) +{ + struct isci_host *ihost = dev_to_ihost(dev); + struct isci_remote_device *idev; + unsigned long flags; + int ret; + + spin_lock_irqsave(&ihost->scic_lock, flags); + idev = isci_lookup_device(dev); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + if (!idev || !test_bit(IDEV_EH, &idev->flags)) { + ret = TMF_RESP_FUNC_COMPLETE; + goto out; + } + + ret = isci_reset_device(ihost, idev); + out: + isci_put_device(idev); + return ret; +} + +int isci_bus_reset_handler(struct scsi_cmnd *cmd) +{ + struct domain_device *dev = sdev_to_domain_dev(cmd->device); + struct isci_host *ihost = dev_to_ihost(dev); + struct isci_remote_device *idev; + unsigned long flags; + int ret; + + spin_lock_irqsave(&ihost->scic_lock, flags); + idev = isci_lookup_device(dev); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + if (!idev) { + ret = TMF_RESP_FUNC_COMPLETE; + goto out; + } + + ret = isci_reset_device(ihost, idev); + out: + isci_put_device(idev); + return ret; +} diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h new file mode 100644 index 000000000000..4a7fa90287ef --- /dev/null +++ b/drivers/scsi/isci/task.h @@ -0,0 +1,367 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef _ISCI_TASK_H_ +#define _ISCI_TASK_H_ + +#include <scsi/sas_ata.h> +#include "host.h" + +struct isci_request; + +/** + * enum isci_tmf_cb_state - This enum defines the possible states in which the + * TMF callback function is invoked during the TMF execution process. + * + * + */ +enum isci_tmf_cb_state { + + isci_tmf_init_state = 0, + isci_tmf_started, + isci_tmf_timed_out +}; + +/** + * enum isci_tmf_function_codes - This enum defines the possible preparations + * of task management requests. + * + * + */ +enum isci_tmf_function_codes { + + isci_tmf_func_none = 0, + isci_tmf_ssp_task_abort = TMF_ABORT_TASK, + isci_tmf_ssp_lun_reset = TMF_LU_RESET, + isci_tmf_sata_srst_high = TMF_LU_RESET + 0x100, /* Non SCSI */ + isci_tmf_sata_srst_low = TMF_LU_RESET + 0x101 /* Non SCSI */ +}; +/** + * struct isci_tmf - This class represents the task management object which + * acts as an interface to libsas for processing task management requests + * + * + */ +struct isci_tmf { + + struct completion *complete; + enum sas_protocol proto; + union { + struct ssp_response_iu resp_iu; + struct dev_to_host_fis d2h_fis; + u8 rsp_buf[SSP_RESP_IU_MAX_SIZE]; + } resp; + unsigned char lun[8]; + u16 io_tag; + struct isci_remote_device *device; + enum isci_tmf_function_codes tmf_code; + int status; + + /* The optional callback function allows the user process to + * track the TMF transmit / timeout conditions. + */ + void (*cb_state_func)( + enum isci_tmf_cb_state, + struct isci_tmf *, void *); + void *cb_data; + +}; + +static inline void isci_print_tmf(struct isci_tmf *tmf) +{ + if (SAS_PROTOCOL_SATA == tmf->proto) + dev_dbg(&tmf->device->isci_port->isci_host->pdev->dev, + "%s: status = %x\n" + "tmf->resp.d2h_fis.status = %x\n" + "tmf->resp.d2h_fis.error = %x\n", + __func__, + tmf->status, + tmf->resp.d2h_fis.status, + tmf->resp.d2h_fis.error); + else + dev_dbg(&tmf->device->isci_port->isci_host->pdev->dev, + "%s: status = %x\n" + "tmf->resp.resp_iu.data_present = %x\n" + "tmf->resp.resp_iu.status = %x\n" + "tmf->resp.resp_iu.data_length = %x\n" + "tmf->resp.resp_iu.data[0] = %x\n" + "tmf->resp.resp_iu.data[1] = %x\n" + "tmf->resp.resp_iu.data[2] = %x\n" + "tmf->resp.resp_iu.data[3] = %x\n", + __func__, + tmf->status, + tmf->resp.resp_iu.datapres, + tmf->resp.resp_iu.status, + be32_to_cpu(tmf->resp.resp_iu.response_data_len), + tmf->resp.resp_iu.resp_data[0], + tmf->resp.resp_iu.resp_data[1], + tmf->resp.resp_iu.resp_data[2], + tmf->resp.resp_iu.resp_data[3]); +} + + +int isci_task_execute_task( + struct sas_task *task, + int num, + gfp_t gfp_flags); + +int isci_task_abort_task( + struct sas_task *task); + +int isci_task_abort_task_set( + struct domain_device *d_device, + u8 *lun); + +int isci_task_clear_aca( + struct domain_device *d_device, + u8 *lun); + +int isci_task_clear_task_set( + struct domain_device *d_device, + u8 *lun); + +int isci_task_query_task( + struct sas_task *task); + +int isci_task_lu_reset( + struct domain_device *d_device, + u8 *lun); + +int isci_task_clear_nexus_port( + struct asd_sas_port *port); + +int isci_task_clear_nexus_ha( + struct sas_ha_struct *ha); + +int isci_task_I_T_nexus_reset( + struct domain_device *d_device); + +void isci_task_request_complete( + struct isci_host *isci_host, + struct isci_request *request, + enum sci_task_status completion_status); + +u16 isci_task_ssp_request_get_io_tag_to_manage( + struct isci_request *request); + +u8 isci_task_ssp_request_get_function( + struct isci_request *request); + + +void *isci_task_ssp_request_get_response_data_address( + struct isci_request *request); + +u32 isci_task_ssp_request_get_response_data_length( + struct isci_request *request); + +int isci_queuecommand( + struct scsi_cmnd *scsi_cmd, + void (*donefunc)(struct scsi_cmnd *)); + +int isci_bus_reset_handler(struct scsi_cmnd *cmd); + +/** + * enum isci_completion_selection - This enum defines the possible actions to + * take with respect to a given request's notification back to libsas. + * + * + */ +enum isci_completion_selection { + + isci_perform_normal_io_completion, /* Normal notify (task_done) */ + isci_perform_aborted_io_completion, /* No notification. */ + isci_perform_error_io_completion /* Use sas_task_abort */ +}; + +static inline void isci_set_task_doneflags( + struct sas_task *task) +{ + /* Since no futher action will be taken on this task, + * make sure to mark it complete from the lldd perspective. + */ + task->task_state_flags |= SAS_TASK_STATE_DONE; + task->task_state_flags &= ~SAS_TASK_AT_INITIATOR; + task->task_state_flags &= ~SAS_TASK_STATE_PENDING; +} +/** + * isci_task_all_done() - This function clears the task bits to indicate the + * LLDD is done with the task. + * + * + */ +static inline void isci_task_all_done( + struct sas_task *task) +{ + unsigned long flags; + + /* Since no futher action will be taken on this task, + * make sure to mark it complete from the lldd perspective. + */ + spin_lock_irqsave(&task->task_state_lock, flags); + isci_set_task_doneflags(task); + spin_unlock_irqrestore(&task->task_state_lock, flags); +} + +/** + * isci_task_set_completion_status() - This function sets the completion status + * for the request. + * @task: This parameter is the completed request. + * @response: This parameter is the response code for the completed task. + * @status: This parameter is the status code for the completed task. + * +* @return The new notification mode for the request. +*/ +static inline enum isci_completion_selection +isci_task_set_completion_status( + struct sas_task *task, + enum service_response response, + enum exec_status status, + enum isci_completion_selection task_notification_selection) +{ + unsigned long flags; + + spin_lock_irqsave(&task->task_state_lock, flags); + + /* If a device reset is being indicated, make sure the I/O + * is in the error path. + */ + if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET) { + /* Fail the I/O to make sure it goes into the error path. */ + response = SAS_TASK_UNDELIVERED; + status = SAM_STAT_TASK_ABORTED; + + task_notification_selection = isci_perform_error_io_completion; + } + task->task_status.resp = response; + task->task_status.stat = status; + + switch (task_notification_selection) { + + case isci_perform_error_io_completion: + + if (task->task_proto == SAS_PROTOCOL_SMP) { + /* There is no error escalation in the SMP case. + * Convert to a normal completion to avoid the + * timeout in the discovery path and to let the + * next action take place quickly. + */ + task_notification_selection + = isci_perform_normal_io_completion; + + /* Fall through to the normal case... */ + } else { + /* Use sas_task_abort */ + /* Leave SAS_TASK_STATE_DONE clear + * Leave SAS_TASK_AT_INITIATOR set. + */ + break; + } + + case isci_perform_aborted_io_completion: + /* This path can occur with task-managed requests as well as + * requests terminated because of LUN or device resets. + */ + /* Fall through to the normal case... */ + case isci_perform_normal_io_completion: + /* Normal notification (task_done) */ + isci_set_task_doneflags(task); + break; + default: + WARN_ONCE(1, "unknown task_notification_selection: %d\n", + task_notification_selection); + break; + } + + spin_unlock_irqrestore(&task->task_state_lock, flags); + + return task_notification_selection; + +} +/** +* isci_execpath_callback() - This function is called from the task +* execute path when the task needs to callback libsas about the submit-time +* task failure. The callback occurs either through the task's done function +* or through sas_task_abort. In the case of regular non-discovery SATA/STP I/O +* requests, libsas takes the host lock before calling execute task. Therefore +* in this situation the host lock must be managed before calling the func. +* +* @ihost: This parameter is the controller to which the I/O request was sent. +* @task: This parameter is the I/O request. +* @func: This parameter is the function to call in the correct context. +* @status: This parameter is the status code for the completed task. +* +*/ +static inline void isci_execpath_callback(struct isci_host *ihost, + struct sas_task *task, + void (*func)(struct sas_task *)) +{ + struct domain_device *dev = task->dev; + + if (dev_is_sata(dev) && task->uldd_task) { + unsigned long flags; + + /* Since we are still in the submit path, and since + * libsas takes the host lock on behalf of SATA + * devices before I/O starts (in the non-discovery case), + * we need to unlock before we can call the callback function. + */ + raw_local_irq_save(flags); + spin_unlock(dev->sata_dev.ap->lock); + func(task); + spin_lock(dev->sata_dev.ap->lock); + raw_local_irq_restore(flags); + } else + func(task); +} +#endif /* !defined(_SCI_TASK_H_) */ diff --git a/drivers/scsi/isci/unsolicited_frame_control.c b/drivers/scsi/isci/unsolicited_frame_control.c new file mode 100644 index 000000000000..e9e1e2abacb9 --- /dev/null +++ b/drivers/scsi/isci/unsolicited_frame_control.c @@ -0,0 +1,225 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "host.h" +#include "unsolicited_frame_control.h" +#include "registers.h" + +int sci_unsolicited_frame_control_construct(struct isci_host *ihost) +{ + struct sci_unsolicited_frame_control *uf_control = &ihost->uf_control; + struct sci_unsolicited_frame *uf; + u32 buf_len, header_len, i; + dma_addr_t dma; + size_t size; + void *virt; + + /* + * Prepare all of the memory sizes for the UF headers, UF address + * table, and UF buffers themselves. + */ + buf_len = SCU_MAX_UNSOLICITED_FRAMES * SCU_UNSOLICITED_FRAME_BUFFER_SIZE; + header_len = SCU_MAX_UNSOLICITED_FRAMES * sizeof(struct scu_unsolicited_frame_header); + size = buf_len + header_len + SCU_MAX_UNSOLICITED_FRAMES * sizeof(dma_addr_t); + + /* + * The Unsolicited Frame buffers are set at the start of the UF + * memory descriptor entry. The headers and address table will be + * placed after the buffers. + */ + virt = dmam_alloc_coherent(&ihost->pdev->dev, size, &dma, GFP_KERNEL); + if (!virt) + return -ENOMEM; + + /* + * Program the location of the UF header table into the SCU. + * Notes: + * - The address must align on a 64-byte boundary. Guaranteed to be + * on 64-byte boundary already 1KB boundary for unsolicited frames. + * - Program unused header entries to overlap with the last + * unsolicited frame. The silicon will never DMA to these unused + * headers, since we program the UF address table pointers to + * NULL. + */ + uf_control->headers.physical_address = dma + buf_len; + uf_control->headers.array = virt + buf_len; + + /* + * Program the location of the UF address table into the SCU. + * Notes: + * - The address must align on a 64-bit boundary. Guaranteed to be on 64 + * byte boundary already due to above programming headers being on a + * 64-bit boundary and headers are on a 64-bytes in size. + */ + uf_control->address_table.physical_address = dma + buf_len + header_len; + uf_control->address_table.array = virt + buf_len + header_len; + uf_control->get = 0; + + /* + * UF buffer requirements are: + * - The last entry in the UF queue is not NULL. + * - There is a power of 2 number of entries (NULL or not-NULL) + * programmed into the queue. + * - Aligned on a 1KB boundary. */ + + /* + * Program the actual used UF buffers into the UF address table and + * the controller's array of UFs. + */ + for (i = 0; i < SCU_MAX_UNSOLICITED_FRAMES; i++) { + uf = &uf_control->buffers.array[i]; + + uf_control->address_table.array[i] = dma; + + uf->buffer = virt; + uf->header = &uf_control->headers.array[i]; + uf->state = UNSOLICITED_FRAME_EMPTY; + + /* + * Increment the address of the physical and virtual memory + * pointers. Everything is aligned on 1k boundary with an + * increment of 1k. + */ + virt += SCU_UNSOLICITED_FRAME_BUFFER_SIZE; + dma += SCU_UNSOLICITED_FRAME_BUFFER_SIZE; + } + + return 0; +} + +enum sci_status sci_unsolicited_frame_control_get_header(struct sci_unsolicited_frame_control *uf_control, + u32 frame_index, + void **frame_header) +{ + if (frame_index < SCU_MAX_UNSOLICITED_FRAMES) { + /* Skip the first word in the frame since this is a controll word used + * by the hardware. + */ + *frame_header = &uf_control->buffers.array[frame_index].header->data; + + return SCI_SUCCESS; + } + + return SCI_FAILURE_INVALID_PARAMETER_VALUE; +} + +enum sci_status sci_unsolicited_frame_control_get_buffer(struct sci_unsolicited_frame_control *uf_control, + u32 frame_index, + void **frame_buffer) +{ + if (frame_index < SCU_MAX_UNSOLICITED_FRAMES) { + *frame_buffer = uf_control->buffers.array[frame_index].buffer; + + return SCI_SUCCESS; + } + + return SCI_FAILURE_INVALID_PARAMETER_VALUE; +} + +bool sci_unsolicited_frame_control_release_frame(struct sci_unsolicited_frame_control *uf_control, + u32 frame_index) +{ + u32 frame_get; + u32 frame_cycle; + + frame_get = uf_control->get & (SCU_MAX_UNSOLICITED_FRAMES - 1); + frame_cycle = uf_control->get & SCU_MAX_UNSOLICITED_FRAMES; + + /* + * In the event there are NULL entries in the UF table, we need to + * advance the get pointer in order to find out if this frame should + * be released (i.e. update the get pointer) + */ + while (lower_32_bits(uf_control->address_table.array[frame_get]) == 0 && + upper_32_bits(uf_control->address_table.array[frame_get]) == 0 && + frame_get < SCU_MAX_UNSOLICITED_FRAMES) + frame_get++; + + /* + * The table has a NULL entry as it's last element. This is + * illegal. + */ + BUG_ON(frame_get >= SCU_MAX_UNSOLICITED_FRAMES); + if (frame_index >= SCU_MAX_UNSOLICITED_FRAMES) + return false; + + uf_control->buffers.array[frame_index].state = UNSOLICITED_FRAME_RELEASED; + + if (frame_get != frame_index) { + /* + * Frames remain in use until we advance the get pointer + * so there is nothing we can do here + */ + return false; + } + + /* + * The frame index is equal to the current get pointer so we + * can now free up all of the frame entries that + */ + while (uf_control->buffers.array[frame_get].state == UNSOLICITED_FRAME_RELEASED) { + uf_control->buffers.array[frame_get].state = UNSOLICITED_FRAME_EMPTY; + + if (frame_get+1 == SCU_MAX_UNSOLICITED_FRAMES-1) { + frame_cycle ^= SCU_MAX_UNSOLICITED_FRAMES; + frame_get = 0; + } else + frame_get++; + } + + uf_control->get = SCU_UFQGP_GEN_BIT(ENABLE_BIT) | frame_cycle | frame_get; + + return true; +} diff --git a/drivers/scsi/isci/unsolicited_frame_control.h b/drivers/scsi/isci/unsolicited_frame_control.h new file mode 100644 index 000000000000..31cb9506f52d --- /dev/null +++ b/drivers/scsi/isci/unsolicited_frame_control.h @@ -0,0 +1,278 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _SCIC_SDS_UNSOLICITED_FRAME_CONTROL_H_ +#define _SCIC_SDS_UNSOLICITED_FRAME_CONTROL_H_ + +#include "isci.h" + +#define SCU_UNSOLICITED_FRAME_HEADER_DATA_DWORDS 15 + +/** + * struct scu_unsolicited_frame_header - + * + * This structure delineates the format of an unsolicited frame header. The + * first DWORD are UF attributes defined by the silicon architecture. The data + * depicts actual header information received on the link. + */ +struct scu_unsolicited_frame_header { + /** + * This field indicates if there is an Initiator Index Table entry with + * which this header is associated. + */ + u32 iit_exists:1; + + /** + * This field simply indicates the protocol type (i.e. SSP, STP, SMP). + */ + u32 protocol_type:3; + + /** + * This field indicates if the frame is an address frame (IAF or OAF) + * or if it is a information unit frame. + */ + u32 is_address_frame:1; + + /** + * This field simply indicates the connection rate at which the frame + * was received. + */ + u32 connection_rate:4; + + u32 reserved:23; + + /** + * This field represents the actual header data received on the link. + */ + u32 data[SCU_UNSOLICITED_FRAME_HEADER_DATA_DWORDS]; + +}; + + + +/** + * enum unsolicited_frame_state - + * + * This enumeration represents the current unsolicited frame state. The + * controller object can not updtate the hardware unsolicited frame put pointer + * unless it has already processed the priror unsolicited frames. + */ +enum unsolicited_frame_state { + /** + * This state is when the frame is empty and not in use. It is + * different from the released state in that the hardware could DMA + * data to this frame buffer. + */ + UNSOLICITED_FRAME_EMPTY, + + /** + * This state is set when the frame buffer is in use by by some + * object in the system. + */ + UNSOLICITED_FRAME_IN_USE, + + /** + * This state is set when the frame is returned to the free pool + * but one or more frames prior to this one are still in use. + * Once all of the frame before this one are freed it will go to + * the empty state. + */ + UNSOLICITED_FRAME_RELEASED, + + UNSOLICITED_FRAME_MAX_STATES +}; + +/** + * struct sci_unsolicited_frame - + * + * This is the unsolicited frame data structure it acts as the container for + * the current frame state, frame header and frame buffer. + */ +struct sci_unsolicited_frame { + /** + * This field contains the current frame state + */ + enum unsolicited_frame_state state; + + /** + * This field points to the frame header data. + */ + struct scu_unsolicited_frame_header *header; + + /** + * This field points to the frame buffer data. + */ + void *buffer; + +}; + +/** + * struct sci_uf_header_array - + * + * This structure contains all of the unsolicited frame header information. + */ +struct sci_uf_header_array { + /** + * This field is represents a virtual pointer to the start + * address of the UF address table. The table contains + * 64-bit pointers as required by the hardware. + */ + struct scu_unsolicited_frame_header *array; + + /** + * This field specifies the physical address location for the UF + * buffer array. + */ + dma_addr_t physical_address; + +}; + +/** + * struct sci_uf_buffer_array - + * + * This structure contains all of the unsolicited frame buffer (actual payload) + * information. + */ +struct sci_uf_buffer_array { + /** + * This field is the unsolicited frame data its used to manage + * the data for the unsolicited frame requests. It also represents + * the virtual address location that corresponds to the + * physical_address field. + */ + struct sci_unsolicited_frame array[SCU_MAX_UNSOLICITED_FRAMES]; + + /** + * This field specifies the physical address location for the UF + * buffer array. + */ + dma_addr_t physical_address; +}; + +/** + * struct sci_uf_address_table_array - + * + * This object maintains all of the unsolicited frame address table specific + * data. The address table is a collection of 64-bit pointers that point to + * 1KB buffers into which the silicon will DMA unsolicited frames. + */ +struct sci_uf_address_table_array { + /** + * This field represents a virtual pointer that refers to the + * starting address of the UF address table. + * 64-bit pointers are required by the hardware. + */ + dma_addr_t *array; + + /** + * This field specifies the physical address location for the UF + * address table. + */ + dma_addr_t physical_address; + +}; + +/** + * struct sci_unsolicited_frame_control - + * + * This object contains all of the data necessary to handle unsolicited frames. + */ +struct sci_unsolicited_frame_control { + /** + * This field is the software copy of the unsolicited frame queue + * get pointer. The controller object writes this value to the + * hardware to let the hardware put more unsolicited frame entries. + */ + u32 get; + + /** + * This field contains all of the unsolicited frame header + * specific fields. + */ + struct sci_uf_header_array headers; + + /** + * This field contains all of the unsolicited frame buffer + * specific fields. + */ + struct sci_uf_buffer_array buffers; + + /** + * This field contains all of the unsolicited frame address table + * specific fields. + */ + struct sci_uf_address_table_array address_table; + +}; + +struct isci_host; + +int sci_unsolicited_frame_control_construct(struct isci_host *ihost); + +enum sci_status sci_unsolicited_frame_control_get_header( + struct sci_unsolicited_frame_control *uf_control, + u32 frame_index, + void **frame_header); + +enum sci_status sci_unsolicited_frame_control_get_buffer( + struct sci_unsolicited_frame_control *uf_control, + u32 frame_index, + void **frame_buffer); + +bool sci_unsolicited_frame_control_release_frame( + struct sci_unsolicited_frame_control *uf_control, + u32 frame_index); + +#endif /* _SCIC_SDS_UNSOLICITED_FRAME_CONTROL_H_ */ diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c index 795828b90f45..8945e201e42e 100644 --- a/drivers/spi/spi_s3c64xx.c +++ b/drivers/spi/spi_s3c64xx.c @@ -116,9 +116,7 @@ (((i)->fifo_lvl_mask + 1))) \ ? 1 : 0) -#define S3C64XX_SPI_ST_TX_DONE(v, i) ((((v) >> (i)->rx_lvl_offset) & \ - (((i)->fifo_lvl_mask + 1) << 1)) \ - ? 1 : 0) +#define S3C64XX_SPI_ST_TX_DONE(v, i) (((v) & (1 << (i)->tx_st_done)) ? 1 : 0) #define TX_FIFO_LVL(v, i) (((v) >> 6) & (i)->fifo_lvl_mask) #define RX_FIFO_LVL(v, i) (((v) >> (i)->rx_lvl_offset) & (i)->fifo_lvl_mask) diff --git a/drivers/staging/brcm80211/Kconfig b/drivers/staging/brcm80211/Kconfig index f4cf9b23481e..379cf16e89f7 100644 --- a/drivers/staging/brcm80211/Kconfig +++ b/drivers/staging/brcm80211/Kconfig @@ -7,6 +7,7 @@ config BRCMSMAC default n depends on PCI depends on WLAN && MAC80211 + depends on X86 || MIPS select BRCMUTIL select FW_LOADER select CRC_CCITT @@ -20,6 +21,7 @@ config BRCMFMAC default n depends on MMC depends on WLAN && CFG80211 + depends on X86 || MIPS select BRCMUTIL select FW_LOADER select WIRELESS_EXT diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig index 1502d80f6f78..20008a4376e8 100644 --- a/drivers/staging/comedi/Kconfig +++ b/drivers/staging/comedi/Kconfig @@ -2,6 +2,7 @@ config COMEDI tristate "Data acquisition support (comedi)" default N depends on m + depends on BROKEN || FRV || M32R || MN10300 || SUPERH || TILE || X86 ---help--- Enable support a wide range of data acquisition devices for Linux. @@ -160,6 +161,7 @@ config COMEDI_PCL730 config COMEDI_PCL812 tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216" + depends on VIRT_TO_BUS default N ---help--- Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink @@ -171,6 +173,7 @@ config COMEDI_PCL812 config COMEDI_PCL816 tristate "Advantech PCL-814 and PCL-816 ISA card support" + depends on VIRT_TO_BUS default N ---help--- Enable support for Advantech PCL-814 and PCL-816 ISA cards @@ -180,6 +183,7 @@ config COMEDI_PCL816 config COMEDI_PCL818 tristate "Advantech PCL-718 and PCL-818 ISA card support" + depends on VIRT_TO_BUS default N ---help--- Enable support for Advantech PCL-818 ISA cards @@ -269,6 +273,7 @@ config COMEDI_DAS800 config COMEDI_DAS1800 tristate "DAS1800 and compatible ISA card support" + depends on VIRT_TO_BUS select COMEDI_FC default N ---help--- @@ -340,6 +345,7 @@ config COMEDI_DT2817 config COMEDI_DT282X tristate "Data Translation DT2821 series and DT-EZ ISA card support" select COMEDI_FC + depends on VIRT_TO_BUS default N ---help--- Enable support for Data Translation DT2821 series including DT-EZ @@ -419,6 +425,7 @@ config COMEDI_ADQ12B config COMEDI_NI_AT_A2150 tristate "NI AT-A2150 ISA card support" depends on COMEDI_NI_COMMON + depends on VIRT_TO_BUS default N ---help--- Enable support for National Instruments AT-A2150 cards @@ -536,6 +543,7 @@ if COMEDI_PCI_DRIVERS && PCI config COMEDI_ADDI_APCI_035 tristate "ADDI-DATA APCI_035 support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_035 cards @@ -545,6 +553,7 @@ config COMEDI_ADDI_APCI_035 config COMEDI_ADDI_APCI_1032 tristate "ADDI-DATA APCI_1032 support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_1032 cards @@ -554,6 +563,7 @@ config COMEDI_ADDI_APCI_1032 config COMEDI_ADDI_APCI_1500 tristate "ADDI-DATA APCI_1500 support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_1500 cards @@ -563,6 +573,7 @@ config COMEDI_ADDI_APCI_1500 config COMEDI_ADDI_APCI_1516 tristate "ADDI-DATA APCI_1516 support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_1516 cards @@ -572,6 +583,7 @@ config COMEDI_ADDI_APCI_1516 config COMEDI_ADDI_APCI_1564 tristate "ADDI-DATA APCI_1564 support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_1564 cards @@ -581,6 +593,7 @@ config COMEDI_ADDI_APCI_1564 config COMEDI_ADDI_APCI_16XX tristate "ADDI-DATA APCI_16xx support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_16xx cards @@ -590,6 +603,7 @@ config COMEDI_ADDI_APCI_16XX config COMEDI_ADDI_APCI_2016 tristate "ADDI-DATA APCI_2016 support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_2016 cards @@ -599,6 +613,7 @@ config COMEDI_ADDI_APCI_2016 config COMEDI_ADDI_APCI_2032 tristate "ADDI-DATA APCI_2032 support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_2032 cards @@ -608,6 +623,7 @@ config COMEDI_ADDI_APCI_2032 config COMEDI_ADDI_APCI_2200 tristate "ADDI-DATA APCI_2200 support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_2200 cards @@ -617,6 +633,7 @@ config COMEDI_ADDI_APCI_2200 config COMEDI_ADDI_APCI_3001 tristate "ADDI-DATA APCI_3001 support" + depends on VIRT_TO_BUS select COMEDI_FC default N ---help--- @@ -627,6 +644,7 @@ config COMEDI_ADDI_APCI_3001 config COMEDI_ADDI_APCI_3120 tristate "ADDI-DATA APCI_3520 support" + depends on VIRT_TO_BUS select COMEDI_FC default N ---help--- @@ -637,6 +655,7 @@ config COMEDI_ADDI_APCI_3120 config COMEDI_ADDI_APCI_3501 tristate "ADDI-DATA APCI_3501 support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_3501 cards @@ -646,6 +665,7 @@ config COMEDI_ADDI_APCI_3501 config COMEDI_ADDI_APCI_3XXX tristate "ADDI-DATA APCI_3xxx support" + depends on VIRT_TO_BUS default N ---help--- Enable support for ADDI-DATA APCI_3xxx cards @@ -712,6 +732,7 @@ config COMEDI_ADL_PCI9111 config COMEDI_ADL_PCI9118 tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support" select COMEDI_FC + depends on VIRT_TO_BUS default N ---help--- Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards @@ -1287,6 +1308,7 @@ config COMEDI_NI_LABPC depends on COMEDI_MITE select COMEDI_8255 select COMEDI_FC + depends on VIRT_TO_BUS default N ---help--- Enable support for National Instruments Lab-PC and compatibles diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig index f96d5b5d5141..d329635fb5c4 100644 --- a/drivers/staging/iio/Kconfig +++ b/drivers/staging/iio/Kconfig @@ -4,7 +4,7 @@ menuconfig IIO tristate "Industrial I/O support" - depends on !S390 + depends on GENERIC_HARDIRQS help The industrial I/O subsystem provides a unified framework for drivers for many different types of embedded sensors using a diff --git a/drivers/staging/iio/accel/adis16204.h b/drivers/staging/iio/accel/adis16204.h index 5310a4297688..1690c0d15690 100644 --- a/drivers/staging/iio/accel/adis16204.h +++ b/drivers/staging/iio/accel/adis16204.h @@ -84,7 +84,6 @@ struct adis16204_state { int adis16204_set_irq(struct iio_dev *indio_dev, bool enable); -#ifdef CONFIG_IIO_RING_BUFFER enum adis16204_scan { ADIS16204_SCAN_SUPPLY, ADIS16204_SCAN_ACC_X, @@ -93,6 +92,7 @@ enum adis16204_scan { ADIS16204_SCAN_TEMP, }; +#ifdef CONFIG_IIO_RING_BUFFER void adis16204_remove_trigger(struct iio_dev *indio_dev); int adis16204_probe_trigger(struct iio_dev *indio_dev); diff --git a/drivers/staging/iio/accel/adis16209.h b/drivers/staging/iio/accel/adis16209.h index 58d08db6f9b5..3153cbee0957 100644 --- a/drivers/staging/iio/accel/adis16209.h +++ b/drivers/staging/iio/accel/adis16209.h @@ -121,8 +121,6 @@ struct adis16209_state { int adis16209_set_irq(struct iio_dev *indio_dev, bool enable); -#ifdef CONFIG_IIO_RING_BUFFER - #define ADIS16209_SCAN_SUPPLY 0 #define ADIS16209_SCAN_ACC_X 1 #define ADIS16209_SCAN_ACC_Y 2 @@ -132,6 +130,8 @@ int adis16209_set_irq(struct iio_dev *indio_dev, bool enable); #define ADIS16209_SCAN_INCLI_Y 6 #define ADIS16209_SCAN_ROT 7 +#ifdef CONFIG_IIO_RING_BUFFER + void adis16209_remove_trigger(struct iio_dev *indio_dev); int adis16209_probe_trigger(struct iio_dev *indio_dev); diff --git a/drivers/staging/iio/gyro/adis16260.h b/drivers/staging/iio/gyro/adis16260.h index 702dc982f62f..24bf70e4b29b 100644 --- a/drivers/staging/iio/gyro/adis16260.h +++ b/drivers/staging/iio/gyro/adis16260.h @@ -104,7 +104,6 @@ struct adis16260_state { int adis16260_set_irq(struct iio_dev *indio_dev, bool enable); -#ifdef CONFIG_IIO_RING_BUFFER /* At the moment triggers are only used for ring buffer * filling. This may change! */ @@ -115,6 +114,7 @@ int adis16260_set_irq(struct iio_dev *indio_dev, bool enable); #define ADIS16260_SCAN_TEMP 3 #define ADIS16260_SCAN_ANGL 4 +#ifdef CONFIG_IIO_RING_BUFFER void adis16260_remove_trigger(struct iio_dev *indio_dev); int adis16260_probe_trigger(struct iio_dev *indio_dev); diff --git a/drivers/staging/iio/imu/adis16400.h b/drivers/staging/iio/imu/adis16400.h index db184d11dfc0..e87715b9acc6 100644 --- a/drivers/staging/iio/imu/adis16400.h +++ b/drivers/staging/iio/imu/adis16400.h @@ -158,7 +158,6 @@ struct adis16400_state { int adis16400_set_irq(struct iio_dev *indio_dev, bool enable); -#ifdef CONFIG_IIO_RING_BUFFER /* At the moment triggers are only used for ring buffer * filling. This may change! */ @@ -182,6 +181,7 @@ int adis16400_set_irq(struct iio_dev *indio_dev, bool enable); #define ADIS16300_SCAN_INCLI_X 12 #define ADIS16300_SCAN_INCLI_Y 13 +#ifdef CONFIG_IIO_RING_BUFFER void adis16400_remove_trigger(struct iio_dev *indio_dev); int adis16400_probe_trigger(struct iio_dev *indio_dev); diff --git a/drivers/staging/lirc/lirc_imon.c b/drivers/staging/lirc/lirc_imon.c index 4039eda2a15b..4a9e563f40fa 100644 --- a/drivers/staging/lirc/lirc_imon.c +++ b/drivers/staging/lirc/lirc_imon.c @@ -672,8 +672,6 @@ static void imon_incoming_packet(struct imon_context *context, static void usb_rx_callback(struct urb *urb) { struct imon_context *context; - unsigned char *buf; - int len; int intfnum = 0; if (!urb) @@ -683,9 +681,6 @@ static void usb_rx_callback(struct urb *urb) if (!context) return; - buf = urb->transfer_buffer; - len = urb->actual_length; - switch (urb->status) { case -ENOENT: /* usbcore unlink successful! */ return; @@ -728,7 +723,6 @@ static int imon_probe(struct usb_interface *interface, int ir_ep_found = 0; int alloc_status = 0; int vfd_proto_6p = 0; - int code_length; struct imon_context *context = NULL; int i; u16 vendor, product; @@ -749,8 +743,6 @@ static int imon_probe(struct usb_interface *interface, else context->display = 1; - code_length = BUF_CHUNK_SIZE * 8; - usbdev = usb_get_dev(interface_to_usbdev(interface)); iface_desc = interface->cur_altsetting; num_endpts = iface_desc->desc.bNumEndpoints; @@ -856,7 +848,7 @@ static int imon_probe(struct usb_interface *interface, strcpy(driver->name, MOD_NAME); driver->minor = -1; - driver->code_length = sizeof(int) * 8; + driver->code_length = BUF_CHUNK_SIZE * 8; driver->sample_rate = 0; driver->features = LIRC_CAN_REC_MODE2; driver->data = context; diff --git a/drivers/staging/lirc/lirc_serial.c b/drivers/staging/lirc/lirc_serial.c index 4a3cca03224a..805df913bb6e 100644 --- a/drivers/staging/lirc/lirc_serial.c +++ b/drivers/staging/lirc/lirc_serial.c @@ -838,7 +838,23 @@ static int hardware_init_port(void) static int init_port(void) { - int i, nlow, nhigh; + int i, nlow, nhigh, result; + + result = request_irq(irq, irq_handler, + IRQF_DISABLED | (share_irq ? IRQF_SHARED : 0), + LIRC_DRIVER_NAME, (void *)&hardware); + + switch (result) { + case -EBUSY: + printk(KERN_ERR LIRC_DRIVER_NAME ": IRQ %d busy\n", irq); + return -EBUSY; + case -EINVAL: + printk(KERN_ERR LIRC_DRIVER_NAME + ": Bad irq number or handler\n"); + return -EINVAL; + default: + break; + }; /* Reserve io region. */ /* @@ -893,34 +909,17 @@ static int init_port(void) printk(KERN_INFO LIRC_DRIVER_NAME ": Manually using active " "%s receiver\n", sense ? "low" : "high"); + dprintk("Interrupt %d, port %04x obtained\n", irq, io); return 0; } static int set_use_inc(void *data) { - int result; unsigned long flags; /* initialize timestamp */ do_gettimeofday(&lasttv); - result = request_irq(irq, irq_handler, - IRQF_DISABLED | (share_irq ? IRQF_SHARED : 0), - LIRC_DRIVER_NAME, (void *)&hardware); - - switch (result) { - case -EBUSY: - printk(KERN_ERR LIRC_DRIVER_NAME ": IRQ %d busy\n", irq); - return -EBUSY; - case -EINVAL: - printk(KERN_ERR LIRC_DRIVER_NAME - ": Bad irq number or handler\n"); - return -EINVAL; - default: - dprintk("Interrupt %d, port %04x obtained\n", irq, io); - break; - } - spin_lock_irqsave(&hardware[type].lock, flags); /* Set DLAB 0. */ @@ -945,10 +944,6 @@ static void set_use_dec(void *data) soutp(UART_IER, sinp(UART_IER) & (~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI))); spin_unlock_irqrestore(&hardware[type].lock, flags); - - free_irq(irq, (void *)&hardware); - - dprintk("freed IRQ %d\n", irq); } static ssize_t lirc_write(struct file *file, const char *buf, @@ -1256,6 +1251,9 @@ exit_serial_exit: static void __exit lirc_serial_exit_module(void) { lirc_serial_exit(); + + free_irq(irq, (void *)&hardware); + if (iommap != 0) release_mem_region(iommap, 8 << ioshift); else diff --git a/drivers/staging/lirc/lirc_sir.c b/drivers/staging/lirc/lirc_sir.c index a7b46f24f24e..0d3864594b12 100644 --- a/drivers/staging/lirc/lirc_sir.c +++ b/drivers/staging/lirc/lirc_sir.c @@ -739,23 +739,16 @@ static void send_space(unsigned long len) static void send_pulse(unsigned long len) { long bytes_out = len / TIME_CONST; - long time_left; - time_left = (long)len - (long)bytes_out * (long)TIME_CONST; - if (bytes_out == 0) { + if (bytes_out == 0) bytes_out++; - time_left = 0; - } + while (bytes_out--) { outb(PULSE, io + UART_TX); /* FIXME treba seriozne cakanie z char/serial.c */ while (!(inb(io + UART_LSR) & UART_LSR_THRE)) ; } -#if 0 - if (time_left > 0) - safe_udelay(time_left); -#endif } #endif diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/lirc/lirc_zilog.c index dd6a57c3c3a3..4e051f6b52db 100644 --- a/drivers/staging/lirc/lirc_zilog.c +++ b/drivers/staging/lirc/lirc_zilog.c @@ -475,14 +475,14 @@ static int lirc_thread(void *arg) dprintk("poll thread started\n"); while (!kthread_should_stop()) { + set_current_state(TASK_INTERRUPTIBLE); + /* if device not opened, we can sleep half a second */ if (atomic_read(&ir->open_count) == 0) { schedule_timeout(HZ/2); continue; } - set_current_state(TASK_INTERRUPTIBLE); - /* * This is ~113*2 + 24 + jitter (2*repeat gap + code length). * We use this interval as the chip resets every time you poll diff --git a/drivers/staging/mei/init.c b/drivers/staging/mei/init.c index d1ffa32cd141..685fcf639644 100644 --- a/drivers/staging/mei/init.c +++ b/drivers/staging/mei/init.c @@ -189,7 +189,7 @@ int mei_hw_init(struct mei_device *dev) mutex_lock(&dev->device_lock); } - if (!err && !dev->recvd_msg) { + if (err <= 0 && !dev->recvd_msg) { dev->mei_state = MEI_DISABLED; dev_dbg(&dev->pdev->dev, "wait_event_interruptible_timeout failed" diff --git a/drivers/staging/mei/wd.c b/drivers/staging/mei/wd.c index 2564b038636a..fff53d0b5c6e 100644 --- a/drivers/staging/mei/wd.c +++ b/drivers/staging/mei/wd.c @@ -169,10 +169,15 @@ int mei_wd_stop(struct mei_device *dev, bool preserve) ret = wait_event_interruptible_timeout(dev->wait_stop_wd, dev->wd_stopped, 10 * HZ); mutex_lock(&dev->device_lock); - if (!dev->wd_stopped) - dev_dbg(&dev->pdev->dev, "stop wd failed to complete.\n"); - else - dev_dbg(&dev->pdev->dev, "stop wd complete.\n"); + if (dev->wd_stopped) { + dev_dbg(&dev->pdev->dev, "stop wd complete ret=%d.\n", ret); + ret = 0; + } else { + if (!ret) + ret = -ETIMEDOUT; + dev_warn(&dev->pdev->dev, + "stop wd failed to complete ret=%d.\n", ret); + } if (preserve) dev->wd_timeout = wd_timeout; diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c index dee2a2c909f5..70c2e7fa6664 100644 --- a/drivers/target/loopback/tcm_loop.c +++ b/drivers/target/loopback/tcm_loop.c @@ -386,7 +386,7 @@ static int tcm_loop_device_reset(struct scsi_cmnd *sc) */ se_cmd->se_tmr_req = core_tmr_alloc_req(se_cmd, (void *)tl_tmr, TMR_LUN_RESET); - if (!se_cmd->se_tmr_req) + if (IS_ERR(se_cmd->se_tmr_req)) goto release; /* * Locate the underlying TCM struct se_lun from sc->device->lun @@ -1017,6 +1017,7 @@ static int tcm_loop_make_nexus( struct se_portal_group *se_tpg; struct tcm_loop_hba *tl_hba = tl_tpg->tl_hba; struct tcm_loop_nexus *tl_nexus; + int ret = -ENOMEM; if (tl_tpg->tl_hba->tl_nexus) { printk(KERN_INFO "tl_tpg->tl_hba->tl_nexus already exists\n"); @@ -1033,8 +1034,10 @@ static int tcm_loop_make_nexus( * Initialize the struct se_session pointer */ tl_nexus->se_sess = transport_init_session(); - if (!tl_nexus->se_sess) + if (IS_ERR(tl_nexus->se_sess)) { + ret = PTR_ERR(tl_nexus->se_sess); goto out; + } /* * Since we are running in 'demo mode' this call with generate a * struct se_node_acl for the tcm_loop struct se_portal_group with the SCSI @@ -1060,7 +1063,7 @@ static int tcm_loop_make_nexus( out: kfree(tl_nexus); - return -ENOMEM; + return ret; } static int tcm_loop_drop_nexus( @@ -1140,7 +1143,7 @@ static ssize_t tcm_loop_tpg_store_nexus( * the fabric protocol_id set in tcm_loop_make_scsi_hba(), and call * tcm_loop_make_nexus() */ - if (strlen(page) > TL_WWN_ADDR_LEN) { + if (strlen(page) >= TL_WWN_ADDR_LEN) { printk(KERN_ERR "Emulated NAA Sas Address: %s, exceeds" " max: %d\n", page, TL_WWN_ADDR_LEN); return -EINVAL; @@ -1321,7 +1324,7 @@ struct se_wwn *tcm_loop_make_scsi_hba( return ERR_PTR(-EINVAL); check_len: - if (strlen(name) > TL_WWN_ADDR_LEN) { + if (strlen(name) >= TL_WWN_ADDR_LEN) { printk(KERN_ERR "Emulated NAA %s Address: %s, exceeds" " max: %d\n", name, tcm_loop_dump_proto_id(tl_hba), TL_WWN_ADDR_LEN); diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c index ee6fad979b50..25c1f49a7d8b 100644 --- a/drivers/target/target_core_configfs.c +++ b/drivers/target/target_core_configfs.c @@ -304,7 +304,7 @@ struct target_fabric_configfs *target_fabric_configfs_init( printk(KERN_ERR "Unable to locate passed fabric name\n"); return NULL; } - if (strlen(name) > TARGET_FABRIC_NAME_SIZE) { + if (strlen(name) >= TARGET_FABRIC_NAME_SIZE) { printk(KERN_ERR "Passed name: %s exceeds TARGET_FABRIC" "_NAME_SIZE\n", name); return NULL; @@ -312,7 +312,7 @@ struct target_fabric_configfs *target_fabric_configfs_init( tf = kzalloc(sizeof(struct target_fabric_configfs), GFP_KERNEL); if (!(tf)) - return ERR_PTR(-ENOMEM); + return NULL; INIT_LIST_HEAD(&tf->tf_list); atomic_set(&tf->tf_access_cnt, 0); @@ -851,7 +851,7 @@ static ssize_t target_core_dev_wwn_store_attr_vpd_unit_serial( return -EOPNOTSUPP; } - if ((strlen(page) + 1) > INQUIRY_VPD_SERIAL_LEN) { + if (strlen(page) >= INQUIRY_VPD_SERIAL_LEN) { printk(KERN_ERR "Emulated VPD Unit Serial exceeds" " INQUIRY_VPD_SERIAL_LEN: %d\n", INQUIRY_VPD_SERIAL_LEN); return -EOVERFLOW; @@ -917,7 +917,7 @@ static ssize_t target_core_dev_wwn_show_attr_vpd_protocol_identifier( transport_dump_vpd_proto_id(vpd, buf, VPD_TMP_BUF_SIZE); - if ((len + strlen(buf) > PAGE_SIZE)) + if ((len + strlen(buf) >= PAGE_SIZE)) break; len += sprintf(page+len, "%s", buf); @@ -962,19 +962,19 @@ static ssize_t target_core_dev_wwn_show_attr_##_name( \ \ memset(buf, 0, VPD_TMP_BUF_SIZE); \ transport_dump_vpd_assoc(vpd, buf, VPD_TMP_BUF_SIZE); \ - if ((len + strlen(buf) > PAGE_SIZE)) \ + if ((len + strlen(buf) >= PAGE_SIZE)) \ break; \ len += sprintf(page+len, "%s", buf); \ \ memset(buf, 0, VPD_TMP_BUF_SIZE); \ transport_dump_vpd_ident_type(vpd, buf, VPD_TMP_BUF_SIZE); \ - if ((len + strlen(buf) > PAGE_SIZE)) \ + if ((len + strlen(buf) >= PAGE_SIZE)) \ break; \ len += sprintf(page+len, "%s", buf); \ \ memset(buf, 0, VPD_TMP_BUF_SIZE); \ transport_dump_vpd_ident(vpd, buf, VPD_TMP_BUF_SIZE); \ - if ((len + strlen(buf) > PAGE_SIZE)) \ + if ((len + strlen(buf) >= PAGE_SIZE)) \ break; \ len += sprintf(page+len, "%s", buf); \ } \ @@ -1299,7 +1299,7 @@ static ssize_t target_core_dev_pr_show_attr_res_pr_registered_i_pts( &i_buf[0] : "", pr_reg->pr_res_key, pr_reg->pr_res_generation); - if ((len + strlen(buf) > PAGE_SIZE)) + if ((len + strlen(buf) >= PAGE_SIZE)) break; len += sprintf(page+len, "%s", buf); @@ -1496,7 +1496,7 @@ static ssize_t target_core_dev_pr_store_attr_res_aptpl_metadata( ret = -ENOMEM; goto out; } - if (strlen(i_port) > PR_APTPL_MAX_IPORT_LEN) { + if (strlen(i_port) >= PR_APTPL_MAX_IPORT_LEN) { printk(KERN_ERR "APTPL metadata initiator_node=" " exceeds PR_APTPL_MAX_IPORT_LEN: %d\n", PR_APTPL_MAX_IPORT_LEN); @@ -1510,7 +1510,7 @@ static ssize_t target_core_dev_pr_store_attr_res_aptpl_metadata( ret = -ENOMEM; goto out; } - if (strlen(isid) > PR_REG_ISID_LEN) { + if (strlen(isid) >= PR_REG_ISID_LEN) { printk(KERN_ERR "APTPL metadata initiator_isid" "= exceeds PR_REG_ISID_LEN: %d\n", PR_REG_ISID_LEN); @@ -1571,7 +1571,7 @@ static ssize_t target_core_dev_pr_store_attr_res_aptpl_metadata( ret = -ENOMEM; goto out; } - if (strlen(t_port) > PR_APTPL_MAX_TPORT_LEN) { + if (strlen(t_port) >= PR_APTPL_MAX_TPORT_LEN) { printk(KERN_ERR "APTPL metadata target_node=" " exceeds PR_APTPL_MAX_TPORT_LEN: %d\n", PR_APTPL_MAX_TPORT_LEN); @@ -3052,7 +3052,7 @@ static struct config_group *target_core_call_addhbatotarget( int ret; memset(buf, 0, TARGET_CORE_NAME_MAX_LEN); - if (strlen(name) > TARGET_CORE_NAME_MAX_LEN) { + if (strlen(name) >= TARGET_CORE_NAME_MAX_LEN) { printk(KERN_ERR "Passed *name strlen(): %d exceeds" " TARGET_CORE_NAME_MAX_LEN: %d\n", (int)strlen(name), TARGET_CORE_NAME_MAX_LEN); diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index 8407f9ca2b31..ba698ea62bb2 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -192,7 +192,7 @@ int transport_get_lun_for_tmr( &SE_NODE_ACL(se_sess)->device_list[unpacked_lun]; if (deve->lun_flags & TRANSPORT_LUNFLAGS_INITIATOR_ACCESS) { se_lun = se_cmd->se_lun = se_tmr->tmr_lun = deve->se_lun; - dev = se_tmr->tmr_dev = se_lun->lun_se_dev; + dev = se_lun->lun_se_dev; se_cmd->pr_res_key = deve->pr_res_key; se_cmd->orig_fe_lun = unpacked_lun; se_cmd->se_orig_obj_ptr = SE_LUN(se_cmd)->lun_se_dev; @@ -216,6 +216,7 @@ int transport_get_lun_for_tmr( se_cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; return -1; } + se_tmr->tmr_dev = dev; spin_lock(&dev->se_tmr_lock); list_add_tail(&se_tmr->tmr_list, &dev->dev_tmr_list); @@ -1430,7 +1431,7 @@ struct se_lun_acl *core_dev_init_initiator_node_lun_acl( struct se_lun_acl *lacl; struct se_node_acl *nacl; - if (strlen(initiatorname) > TRANSPORT_IQN_LEN) { + if (strlen(initiatorname) >= TRANSPORT_IQN_LEN) { printk(KERN_ERR "%s InitiatorName exceeds maximum size.\n", TPG_TFO(tpg)->get_fabric_name()); *ret = -EOVERFLOW; diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index a79f518ca6e2..b662db3a320b 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -1916,7 +1916,7 @@ static int __core_scsi3_update_aptpl_buf( pr_reg->pr_res_mapped_lun); } - if ((len + strlen(tmp) > pr_aptpl_buf_len)) { + if ((len + strlen(tmp) >= pr_aptpl_buf_len)) { printk(KERN_ERR "Unable to update renaming" " APTPL metadata\n"); spin_unlock(&T10_RES(su_dev)->registration_lock); @@ -1934,7 +1934,7 @@ static int __core_scsi3_update_aptpl_buf( TPG_TFO(tpg)->tpg_get_tag(tpg), lun->lun_sep->sep_rtpi, lun->unpacked_lun, reg_count); - if ((len + strlen(tmp) > pr_aptpl_buf_len)) { + if ((len + strlen(tmp) >= pr_aptpl_buf_len)) { printk(KERN_ERR "Unable to update renaming" " APTPL metadata\n"); spin_unlock(&T10_RES(su_dev)->registration_lock); @@ -1986,7 +1986,7 @@ static int __core_scsi3_write_aptpl_to_file( memset(iov, 0, sizeof(struct iovec)); memset(path, 0, 512); - if (strlen(&wwn->unit_serial[0]) > 512) { + if (strlen(&wwn->unit_serial[0]) >= 512) { printk(KERN_ERR "WWN value for struct se_device does not fit" " into path buffer\n"); return -1; diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c index 59b8b9c5ad72..179063d81cdd 100644 --- a/drivers/target/target_core_tmr.c +++ b/drivers/target/target_core_tmr.c @@ -75,10 +75,16 @@ void core_tmr_release_req( { struct se_device *dev = tmr->tmr_dev; + if (!dev) { + kmem_cache_free(se_tmr_req_cache, tmr); + return; + } + spin_lock(&dev->se_tmr_lock); list_del(&tmr->tmr_list); - kmem_cache_free(se_tmr_req_cache, tmr); spin_unlock(&dev->se_tmr_lock); + + kmem_cache_free(se_tmr_req_cache, tmr); } static void core_tmr_handle_tas_abort( diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 4dafeb8b5638..4b9b7169bdd9 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -536,13 +536,13 @@ EXPORT_SYMBOL(transport_register_session); void transport_deregister_session_configfs(struct se_session *se_sess) { struct se_node_acl *se_nacl; - + unsigned long flags; /* * Used by struct se_node_acl's under ConfigFS to locate active struct se_session */ se_nacl = se_sess->se_node_acl; if ((se_nacl)) { - spin_lock_irq(&se_nacl->nacl_sess_lock); + spin_lock_irqsave(&se_nacl->nacl_sess_lock, flags); list_del(&se_sess->sess_acl_list); /* * If the session list is empty, then clear the pointer. @@ -556,7 +556,7 @@ void transport_deregister_session_configfs(struct se_session *se_sess) se_nacl->acl_sess_list.prev, struct se_session, sess_acl_list); } - spin_unlock_irq(&se_nacl->nacl_sess_lock); + spin_unlock_irqrestore(&se_nacl->nacl_sess_lock, flags); } } EXPORT_SYMBOL(transport_deregister_session_configfs); diff --git a/drivers/target/tcm_fc/tcm_fc.h b/drivers/target/tcm_fc/tcm_fc.h index defff32b7880..7b82f1b7fef8 100644 --- a/drivers/target/tcm_fc/tcm_fc.h +++ b/drivers/target/tcm_fc/tcm_fc.h @@ -144,7 +144,7 @@ enum ft_cmd_state { */ struct ft_cmd { enum ft_cmd_state state; - u16 lun; /* LUN from request */ + u32 lun; /* LUN from request */ struct ft_sess *sess; /* session held for cmd */ struct fc_seq *seq; /* sequence in exchange mgr */ struct se_cmd se_cmd; /* Local TCM I/O descriptor */ diff --git a/drivers/target/tcm_fc/tfc_cmd.c b/drivers/target/tcm_fc/tfc_cmd.c index c056a1132ae1..b2a106729d49 100644 --- a/drivers/target/tcm_fc/tfc_cmd.c +++ b/drivers/target/tcm_fc/tfc_cmd.c @@ -94,29 +94,6 @@ void ft_dump_cmd(struct ft_cmd *cmd, const char *caller) 16, 4, cmd->cdb, MAX_COMMAND_SIZE, 0); } -/* - * Get LUN from CDB. - */ -static int ft_get_lun_for_cmd(struct ft_cmd *cmd, u8 *lunp) -{ - u64 lun; - - lun = lunp[1]; - switch (lunp[0] >> 6) { - case 0: - break; - case 1: - lun |= (lunp[0] & 0x3f) << 8; - break; - default: - return -1; - } - if (lun >= TRANSPORT_MAX_LUNS_PER_TPG) - return -1; - cmd->lun = lun; - return transport_get_lun_for_cmd(&cmd->se_cmd, NULL, lun); -} - static void ft_queue_cmd(struct ft_sess *sess, struct ft_cmd *cmd) { struct se_queue_obj *qobj; @@ -418,6 +395,7 @@ static void ft_send_tm(struct ft_cmd *cmd) { struct se_tmr_req *tmr; struct fcp_cmnd *fcp; + struct ft_sess *sess; u8 tm_func; fcp = fc_frame_payload_get(cmd->req_frame, sizeof(*fcp)); @@ -425,13 +403,6 @@ static void ft_send_tm(struct ft_cmd *cmd) switch (fcp->fc_tm_flags) { case FCP_TMF_LUN_RESET: tm_func = TMR_LUN_RESET; - if (ft_get_lun_for_cmd(cmd, fcp->fc_lun) < 0) { - ft_dump_cmd(cmd, __func__); - transport_send_check_condition_and_sense(&cmd->se_cmd, - cmd->se_cmd.scsi_sense_reason, 0); - ft_sess_put(cmd->sess); - return; - } break; case FCP_TMF_TGT_RESET: tm_func = TMR_TARGET_WARM_RESET; @@ -463,6 +434,36 @@ static void ft_send_tm(struct ft_cmd *cmd) return; } cmd->se_cmd.se_tmr_req = tmr; + + switch (fcp->fc_tm_flags) { + case FCP_TMF_LUN_RESET: + cmd->lun = scsilun_to_int((struct scsi_lun *)fcp->fc_lun); + if (transport_get_lun_for_tmr(&cmd->se_cmd, cmd->lun) < 0) { + /* + * Make sure to clean up newly allocated TMR request + * since "unable to handle TMR request because failed + * to get to LUN" + */ + FT_TM_DBG("Failed to get LUN for TMR func %d, " + "se_cmd %p, unpacked_lun %d\n", + tm_func, &cmd->se_cmd, cmd->lun); + ft_dump_cmd(cmd, __func__); + sess = cmd->sess; + transport_send_check_condition_and_sense(&cmd->se_cmd, + cmd->se_cmd.scsi_sense_reason, 0); + transport_generic_free_cmd(&cmd->se_cmd, 0, 1, 0); + ft_sess_put(sess); + return; + } + break; + case FCP_TMF_TGT_RESET: + case FCP_TMF_CLR_TASK_SET: + case FCP_TMF_ABT_TASK_SET: + case FCP_TMF_CLR_ACA: + break; + default: + return; + } transport_generic_handle_tmr(&cmd->se_cmd); } @@ -635,7 +636,8 @@ static void ft_send_cmd(struct ft_cmd *cmd) fc_seq_exch(cmd->seq)->lp->tt.seq_set_resp(cmd->seq, ft_recv_seq, cmd); - ret = ft_get_lun_for_cmd(cmd, fcp->fc_lun); + cmd->lun = scsilun_to_int((struct scsi_lun *)fcp->fc_lun); + ret = transport_get_lun_for_cmd(&cmd->se_cmd, NULL, cmd->lun); if (ret < 0) { ft_dump_cmd(cmd, __func__); transport_send_check_condition_and_sense(&cmd->se_cmd, diff --git a/drivers/target/tcm_fc/tfc_io.c b/drivers/target/tcm_fc/tfc_io.c index 4c3c0efbe13f..8c4a24077d9d 100644 --- a/drivers/target/tcm_fc/tfc_io.c +++ b/drivers/target/tcm_fc/tfc_io.c @@ -203,7 +203,7 @@ int ft_queue_data_in(struct se_cmd *se_cmd) /* XXX For now, initiator will retry */ if (printk_ratelimit()) printk(KERN_ERR "%s: Failed to send frame %p, " - "xid <0x%x>, remaining <0x%x>, " + "xid <0x%x>, remaining %zu, " "lso_max <0x%x>\n", __func__, fp, ep->xid, remaining, lport->lso_max); diff --git a/drivers/target/tcm_fc/tfc_sess.c b/drivers/target/tcm_fc/tfc_sess.c index a3bd57f2ea32..7491e21cc6ae 100644 --- a/drivers/target/tcm_fc/tfc_sess.c +++ b/drivers/target/tcm_fc/tfc_sess.c @@ -229,7 +229,7 @@ static struct ft_sess *ft_sess_create(struct ft_tport *tport, u32 port_id, return NULL; sess->se_sess = transport_init_session(); - if (!sess->se_sess) { + if (IS_ERR(sess->se_sess)) { kfree(sess); return NULL; } @@ -332,7 +332,7 @@ void ft_sess_close(struct se_session *se_sess) lport = sess->tport->lport; port_id = sess->port_id; if (port_id == -1) { - mutex_lock(&ft_lport_lock); + mutex_unlock(&ft_lport_lock); return; } FT_SESS_DBG("port_id %x\n", port_id); diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 09e8c7d53af3..19b4ae052af8 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -875,7 +875,8 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm, *dp++ = last << 7 | first << 6 | 1; /* EA */ len--; } - memcpy(dp, skb_pull(dlci->skb, len), len); + memcpy(dp, dlci->skb->data, len); + skb_pull(dlci->skb, len); __gsm_data_queue(dlci, msg); if (last) dlci->skb = NULL; @@ -984,10 +985,22 @@ static void gsm_control_reply(struct gsm_mux *gsm, int cmd, u8 *data, */ static void gsm_process_modem(struct tty_struct *tty, struct gsm_dlci *dlci, - u32 modem) + u32 modem, int clen) { int mlines = 0; - u8 brk = modem >> 6; + u8 brk = 0; + + /* The modem status command can either contain one octet (v.24 signals) + or two octets (v.24 signals + break signals). The length field will + either be 2 or 3 respectively. This is specified in section + 5.4.6.3.7 of the 27.010 mux spec. */ + + if (clen == 2) + modem = modem & 0x7f; + else { + brk = modem & 0x7f; + modem = (modem >> 7) & 0x7f; + }; /* Flow control/ready to communicate */ if (modem & MDM_FC) { @@ -1061,7 +1074,7 @@ static void gsm_control_modem(struct gsm_mux *gsm, u8 *data, int clen) return; } tty = tty_port_tty_get(&dlci->port); - gsm_process_modem(tty, dlci, modem); + gsm_process_modem(tty, dlci, modem, clen); if (tty) { tty_wakeup(tty); tty_kref_put(tty); @@ -1482,12 +1495,13 @@ static void gsm_dlci_begin_close(struct gsm_dlci *dlci) * open we shovel the bits down it, if not we drop them. */ -static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int len) +static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int clen) { /* krefs .. */ struct tty_port *port = &dlci->port; struct tty_struct *tty = tty_port_tty_get(port); unsigned int modem = 0; + int len = clen; if (debug & 16) pr_debug("%d bytes for tty %p\n", len, tty); @@ -1507,7 +1521,7 @@ static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int len) if (len == 0) return; } - gsm_process_modem(tty, dlci, modem); + gsm_process_modem(tty, dlci, modem, clen); /* Line state will go via DLCI 0 controls only */ case 1: default: diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 0ad32888091c..c3954fbf6ac4 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1815,6 +1815,7 @@ do_it_again: /* FIXME: does n_tty_set_room need locking ? */ n_tty_set_room(tty); timeout = schedule_timeout(timeout); + BUG_ON(!tty->read_buf); continue; } __set_current_state(TASK_RUNNING); diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c index b40f7b90c81d..b4129f53fb1b 100644 --- a/drivers/tty/serial/8250.c +++ b/drivers/tty/serial/8250.c @@ -3318,6 +3318,7 @@ void serial8250_unregister_port(int line) uart->port.flags &= ~UPF_BOOT_AUTOCONF; uart->port.type = PORT_UNKNOWN; uart->port.dev = &serial8250_isa_devs->dev; + uart->capabilities = uart_config[uart->port.type].flags; uart_add_one_port(&serial8250_reg, &uart->port); } else { uart->port.dev = NULL; diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c index 4b4968a294b2..f41b4259ecdd 100644 --- a/drivers/tty/serial/8250_pci.c +++ b/drivers/tty/serial/8250_pci.c @@ -973,7 +973,7 @@ ce4100_serial_setup(struct serial_private *priv, static int pci_omegapci_setup(struct serial_private *priv, - struct pciserial_board *board, + const struct pciserial_board *board, struct uart_port *port, int idx) { return setup_port(priv, port, 2, idx * 8, 0); @@ -994,6 +994,15 @@ static int skip_tx_en_setup(struct serial_private *priv, return pci_default_setup(priv, board, port, idx); } +static int pci_eg20t_init(struct pci_dev *dev) +{ +#if defined(CONFIG_SERIAL_PCH_UART) || defined(CONFIG_SERIAL_PCH_UART_MODULE) + return -ENODEV; +#else + return 0; +#endif +} + /* This should be in linux/pci_ids.h */ #define PCI_VENDOR_ID_SBSMODULARIO 0x124B #define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B @@ -1446,6 +1455,56 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .init = pci_oxsemi_tornado_init, .setup = pci_default_setup, }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8811, + .init = pci_eg20t_init, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8812, + .init = pci_eg20t_init, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8813, + .init = pci_eg20t_init, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8814, + .init = pci_eg20t_init, + }, + { + .vendor = 0x10DB, + .device = 0x8027, + .init = pci_eg20t_init, + }, + { + .vendor = 0x10DB, + .device = 0x8028, + .init = pci_eg20t_init, + }, + { + .vendor = 0x10DB, + .device = 0x8029, + .init = pci_eg20t_init, + }, + { + .vendor = 0x10DB, + .device = 0x800C, + .init = pci_eg20t_init, + }, + { + .vendor = 0x10DB, + .device = 0x800D, + .init = pci_eg20t_init, + }, + { + .vendor = 0x10DB, + .device = 0x800D, + .init = pci_eg20t_init, + }, /* * Cronyx Omega PCI (PLX-chip based) */ diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 8dc0541feecc..f5f6831b0a64 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -50,6 +50,7 @@ #include <linux/dmaengine.h> #include <linux/dma-mapping.h> #include <linux/scatterlist.h> +#include <linux/delay.h> #include <asm/io.h> #include <asm/sizes.h> @@ -65,6 +66,30 @@ #define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE) #define UART_DUMMY_DR_RX (1 << 16) + +#define UART_WA_SAVE_NR 14 + +static void pl011_lockup_wa(unsigned long data); +static const u32 uart_wa_reg[UART_WA_SAVE_NR] = { + ST_UART011_DMAWM, + ST_UART011_TIMEOUT, + ST_UART011_LCRH_RX, + UART011_IBRD, + UART011_FBRD, + ST_UART011_LCRH_TX, + UART011_IFLS, + ST_UART011_XFCR, + ST_UART011_XON1, + ST_UART011_XON2, + ST_UART011_XOFF1, + ST_UART011_XOFF2, + UART011_CR, + UART011_IMSC +}; + +static u32 uart_wa_regdata[UART_WA_SAVE_NR]; +static DECLARE_TASKLET(pl011_lockup_tlet, pl011_lockup_wa, 0); + /* There is by now at least one vendor with differing details, so handle it */ struct vendor_data { unsigned int ifls; @@ -72,6 +97,7 @@ struct vendor_data { unsigned int lcrh_tx; unsigned int lcrh_rx; bool oversampling; + bool interrupt_may_hang; /* vendor-specific */ bool dma_threshold; }; @@ -90,9 +116,12 @@ static struct vendor_data vendor_st = { .lcrh_tx = ST_UART011_LCRH_TX, .lcrh_rx = ST_UART011_LCRH_RX, .oversampling = true, + .interrupt_may_hang = true, .dma_threshold = true, }; +static struct uart_amba_port *amba_ports[UART_NR]; + /* Deals with DMA transactions */ struct pl011_sgbuf { @@ -132,6 +161,7 @@ struct uart_amba_port { unsigned int lcrh_rx; /* vendor-specific */ bool autorts; char type[12]; + bool interrupt_may_hang; /* vendor-specific */ #ifdef CONFIG_DMA_ENGINE /* DMA stuff */ bool using_tx_dma; @@ -1008,6 +1038,68 @@ static inline bool pl011_dma_rx_running(struct uart_amba_port *uap) #endif +/* + * pl011_lockup_wa + * This workaround aims to break the deadlock situation + * when after long transfer over uart in hardware flow + * control, uart interrupt registers cannot be cleared. + * Hence uart transfer gets blocked. + * + * It is seen that during such deadlock condition ICR + * don't get cleared even on multiple write. This leads + * pass_counter to decrease and finally reach zero. This + * can be taken as trigger point to run this UART_BT_WA. + * + */ +static void pl011_lockup_wa(unsigned long data) +{ + struct uart_amba_port *uap = amba_ports[0]; + void __iomem *base = uap->port.membase; + struct circ_buf *xmit = &uap->port.state->xmit; + struct tty_struct *tty = uap->port.state->port.tty; + int buf_empty_retries = 200; + int loop; + + /* Stop HCI layer from submitting data for tx */ + tty->hw_stopped = 1; + while (!uart_circ_empty(xmit)) { + if (buf_empty_retries-- == 0) + break; + udelay(100); + } + + /* Backup registers */ + for (loop = 0; loop < UART_WA_SAVE_NR; loop++) + uart_wa_regdata[loop] = readl(base + uart_wa_reg[loop]); + + /* Disable UART so that FIFO data is flushed out */ + writew(0x00, uap->port.membase + UART011_CR); + + /* Soft reset UART module */ + if (uap->port.dev->platform_data) { + struct amba_pl011_data *plat; + + plat = uap->port.dev->platform_data; + if (plat->reset) + plat->reset(); + } + + /* Restore registers */ + for (loop = 0; loop < UART_WA_SAVE_NR; loop++) + writew(uart_wa_regdata[loop] , + uap->port.membase + uart_wa_reg[loop]); + + /* Initialise the old status of the modem signals */ + uap->old_status = readw(uap->port.membase + UART01x_FR) & + UART01x_FR_MODEM_ANY; + + if (readl(base + UART011_MIS) & 0x2) + printk(KERN_EMERG "UART_BT_WA: ***FAILED***\n"); + + /* Start Tx/Rx */ + tty->hw_stopped = 0; +} + static void pl011_stop_tx(struct uart_port *port) { struct uart_amba_port *uap = (struct uart_amba_port *)port; @@ -1158,8 +1250,11 @@ static irqreturn_t pl011_int(int irq, void *dev_id) if (status & UART011_TXIS) pl011_tx_chars(uap); - if (pass_counter-- == 0) + if (pass_counter-- == 0) { + if (uap->interrupt_may_hang) + tasklet_schedule(&pl011_lockup_tlet); break; + } status = readw(uap->port.membase + UART011_MIS); } while (status != 0); @@ -1339,6 +1434,14 @@ static int pl011_startup(struct uart_port *port) writew(uap->im, uap->port.membase + UART011_IMSC); spin_unlock_irq(&uap->port.lock); + if (uap->port.dev->platform_data) { + struct amba_pl011_data *plat; + + plat = uap->port.dev->platform_data; + if (plat->init) + plat->init(); + } + return 0; clk_dis: @@ -1394,6 +1497,15 @@ static void pl011_shutdown(struct uart_port *port) * Shut down the clock producer */ clk_disable(uap->clk); + + if (uap->port.dev->platform_data) { + struct amba_pl011_data *plat; + + plat = uap->port.dev->platform_data; + if (plat->exit) + plat->exit(); + } + } static void @@ -1700,6 +1812,14 @@ static int __init pl011_console_setup(struct console *co, char *options) if (!uap) return -ENODEV; + if (uap->port.dev->platform_data) { + struct amba_pl011_data *plat; + + plat = uap->port.dev->platform_data; + if (plat->init) + plat->init(); + } + uap->port.uartclk = clk_get_rate(uap->clk); if (options) @@ -1774,6 +1894,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) uap->lcrh_rx = vendor->lcrh_rx; uap->lcrh_tx = vendor->lcrh_tx; uap->fifosize = vendor->fifosize; + uap->interrupt_may_hang = vendor->interrupt_may_hang; uap->port.dev = &dev->dev; uap->port.mapbase = dev->res.start; uap->port.membase = base; diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 6d5d6e679fc7..af9b7814965a 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1709,12 +1709,13 @@ static int atmel_serial_resume(struct platform_device *pdev) static int __devinit atmel_serial_probe(struct platform_device *pdev) { struct atmel_uart_port *port; + struct atmel_uart_data *pdata = pdev->dev.platform_data; void *data; int ret; BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1)); - port = &atmel_ports[pdev->id]; + port = &atmel_ports[pdata->num]; port->backup_imr = 0; atmel_init_port(port, pdev); diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c index a1a0e55d0807..c0b68b9cad91 100644 --- a/drivers/tty/serial/bcm63xx_uart.c +++ b/drivers/tty/serial/bcm63xx_uart.c @@ -250,6 +250,20 @@ static void bcm_uart_do_rx(struct uart_port *port) /* get overrun/fifo empty information from ier * register */ iestat = bcm_uart_readl(port, UART_IR_REG); + + if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) { + unsigned int val; + + /* fifo reset is required to clear + * interrupt */ + val = bcm_uart_readl(port, UART_CTL_REG); + val |= UART_CTL_RSTRXFIFO_MASK; + bcm_uart_writel(port, val, UART_CTL_REG); + + port->icount.overrun++; + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY))) break; @@ -284,10 +298,6 @@ static void bcm_uart_do_rx(struct uart_port *port) if (uart_handle_sysrq_char(port, c)) continue; - if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) { - port->icount.overrun++; - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } if ((cstat & port->ignore_status_mask) == 0) tty_insert_flip_char(tty, c, flag); diff --git a/drivers/tty/serial/jsm/jsm_driver.c b/drivers/tty/serial/jsm/jsm_driver.c index 18f548449c63..96da17868cf3 100644 --- a/drivers/tty/serial/jsm/jsm_driver.c +++ b/drivers/tty/serial/jsm/jsm_driver.c @@ -125,7 +125,7 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device brd->bd_uart_offset = 0x200; brd->bd_dividend = 921600; - brd->re_map_membase = ioremap(brd->membase, 0x1000); + brd->re_map_membase = ioremap(brd->membase, pci_resource_len(pdev, 0)); if (!brd->re_map_membase) { dev_err(&pdev->dev, "card has no PCI Memory resources, " diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c index 1bd28450ca40..a764bf99743b 100644 --- a/drivers/tty/serial/mrst_max3110.c +++ b/drivers/tty/serial/mrst_max3110.c @@ -421,7 +421,6 @@ static int max3110_main_thread(void *_max) int ret = 0; struct circ_buf *xmit = &max->con_xmit; - init_waitqueue_head(wq); pr_info(PR_FMT "start main thread\n"); do { @@ -823,7 +822,7 @@ static int __devinit serial_m3110_probe(struct spi_device *spi) res = RC_TAG; ret = max3110_write_then_read(max, (u8 *)&res, (u8 *)&res, 2, 0); if (ret < 0 || res == 0 || res == 0xffff) { - printk(KERN_ERR "MAX3111 deemed not present (conf reg %04x)", + dev_dbg(&spi->dev, "MAX3111 deemed not present (conf reg %04x)", res); ret = -ENODEV; goto err_get_page; @@ -838,6 +837,8 @@ static int __devinit serial_m3110_probe(struct spi_device *spi) max->con_xmit.head = 0; max->con_xmit.tail = 0; + init_waitqueue_head(&max->wq); + max->main_thread = kthread_run(max3110_main_thread, max, "max3110_main"); if (IS_ERR(max->main_thread)) { diff --git a/drivers/tty/serial/s5pv210.c b/drivers/tty/serial/s5pv210.c index fb2619f93d84..dd194dc80ee9 100644 --- a/drivers/tty/serial/s5pv210.c +++ b/drivers/tty/serial/s5pv210.c @@ -30,7 +30,7 @@ static int s5pv210_serial_setsource(struct uart_port *port, struct s3c2410_uartcfg *cfg = port->dev->platform_data; unsigned long ucon = rd_regl(port, S3C2410_UCON); - if ((cfg->clocks_size) == 1) + if (cfg->flags & NO_NEED_CHECK_CLKSRC) return 0; if (strcmp(clk->name, "pclk") == 0) @@ -55,7 +55,7 @@ static int s5pv210_serial_getsource(struct uart_port *port, clk->divisor = 1; - if ((cfg->clocks_size) == 1) + if (cfg->flags & NO_NEED_CHECK_CLKSRC) return 0; switch (ucon & S5PV210_UCON_CLKMASK) { diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 5d01d32e2cf0..ef925d581713 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -555,7 +555,7 @@ static void tty_ldisc_flush_works(struct tty_struct *tty) static int tty_ldisc_wait_idle(struct tty_struct *tty) { int ret; - ret = wait_event_interruptible_timeout(tty_ldisc_idle, + ret = wait_event_timeout(tty_ldisc_idle, atomic_read(&tty->ldisc->users) == 1, 5 * HZ); if (ret < 0) return ret; @@ -763,6 +763,8 @@ static int tty_ldisc_reinit(struct tty_struct *tty, int ldisc) if (IS_ERR(ld)) return -1; + WARN_ON_ONCE(tty_ldisc_wait_idle(tty)); + tty_ldisc_close(tty, tty->ldisc); tty_ldisc_put(tty->ldisc); tty->ldisc = NULL; diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index e35a17687c05..34e3da5aa72a 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -375,7 +375,7 @@ static int usb_unbind_interface(struct device *dev) * Just re-enable it without affecting the endpoint toggles. */ usb_enable_interface(udev, intf, false); - } else if (!error && !intf->dev.power.in_suspend) { + } else if (!error && !intf->dev.power.is_prepared) { r = usb_set_interface(udev, intf->altsetting[0]. desc.bInterfaceNumber, 0); if (r < 0) @@ -960,7 +960,7 @@ void usb_rebind_intf(struct usb_interface *intf) } /* Try to rebind the interface */ - if (!intf->dev.power.in_suspend) { + if (!intf->dev.power.is_prepared) { intf->needs_binding = 0; rc = device_attach(&intf->dev); if (rc < 0) @@ -1107,7 +1107,7 @@ static int usb_resume_interface(struct usb_device *udev, if (intf->condition == USB_INTERFACE_UNBOUND) { /* Carry out a deferred switch to altsetting 0 */ - if (intf->needs_altsetting0 && !intf->dev.power.in_suspend) { + if (intf->needs_altsetting0 && !intf->dev.power.is_prepared) { usb_set_interface(udev, intf->altsetting[0]. desc.bInterfaceNumber, 0); intf->needs_altsetting0 = 0; @@ -1187,13 +1187,22 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg) for (i = n - 1; i >= 0; --i) { intf = udev->actconfig->interface[i]; status = usb_suspend_interface(udev, intf, msg); + + /* Ignore errors during system sleep transitions */ + if (!(msg.event & PM_EVENT_AUTO)) + status = 0; if (status != 0) break; } } - if (status == 0) + if (status == 0) { status = usb_suspend_device(udev, msg); + /* Again, ignore errors during system sleep transitions */ + if (!(msg.event & PM_EVENT_AUTO)) + status = 0; + } + /* If the suspend failed, resume interfaces that did get suspended */ if (status != 0) { msg.event ^= (PM_EVENT_SUSPEND | PM_EVENT_RESUME); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 90ae1753dda1..a428aa080a36 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1634,6 +1634,7 @@ void usb_disconnect(struct usb_device **pdev) { struct usb_device *udev = *pdev; int i; + struct usb_hcd *hcd = bus_to_hcd(udev->bus); if (!udev) { pr_debug ("%s nodev\n", __func__); @@ -1661,7 +1662,9 @@ void usb_disconnect(struct usb_device **pdev) * so that the hardware is now fully quiesced. */ dev_dbg (&udev->dev, "unregistering device\n"); + mutex_lock(hcd->bandwidth_mutex); usb_disable_device(udev, 0); + mutex_unlock(hcd->bandwidth_mutex); usb_hcd_synchronize_unlinks(udev); usb_remove_ep_devs(&udev->ep0); @@ -2362,6 +2365,10 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg) USB_DEVICE_REMOTE_WAKEUP, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); + + /* System sleep transitions should never fail */ + if (!(msg.event & PM_EVENT_AUTO)) + status = 0; } else { /* device has up to 10 msec to fully suspend */ dev_dbg(&udev->dev, "usb %ssuspend\n", @@ -2611,16 +2618,15 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg) struct usb_device *hdev = hub->hdev; unsigned port1; - /* fail if children aren't already suspended */ + /* Warn if children aren't already suspended */ for (port1 = 1; port1 <= hdev->maxchild; port1++) { struct usb_device *udev; udev = hdev->children [port1-1]; if (udev && udev->can_submit) { - if (!(msg.event & PM_EVENT_AUTO)) - dev_dbg(&intf->dev, "port %d nyet suspended\n", - port1); - return -EBUSY; + dev_warn(&intf->dev, "port %d nyet suspended\n", port1); + if (msg.event & PM_EVENT_AUTO) + return -EBUSY; } } diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 5701e857392b..0b5ec234c787 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1135,15 +1135,26 @@ void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf, * Deallocates hcd/hardware state for the endpoints (nuking all or most * pending urbs) and usbcore state for the interfaces, so that usbcore * must usb_set_configuration() before any interfaces could be used. + * + * Must be called with hcd->bandwidth_mutex held. */ void usb_disable_device(struct usb_device *dev, int skip_ep0) { int i; + struct usb_hcd *hcd = bus_to_hcd(dev->bus); /* getting rid of interfaces will disconnect * any drivers bound to them (a key side effect) */ if (dev->actconfig) { + /* + * FIXME: In order to avoid self-deadlock involving the + * bandwidth_mutex, we have to mark all the interfaces + * before unregistering any of them. + */ + for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++) + dev->actconfig->interface[i]->unregistering = 1; + for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++) { struct usb_interface *interface; @@ -1153,7 +1164,6 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) continue; dev_dbg(&dev->dev, "unregistering interface %s\n", dev_name(&interface->dev)); - interface->unregistering = 1; remove_intf_ep_devs(interface); device_del(&interface->dev); } @@ -1172,6 +1182,16 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__, skip_ep0 ? "non-ep0" : "all"); + if (hcd->driver->check_bandwidth) { + /* First pass: Cancel URBs, leave endpoint pointers intact. */ + for (i = skip_ep0; i < 16; ++i) { + usb_disable_endpoint(dev, i, false); + usb_disable_endpoint(dev, i + USB_DIR_IN, false); + } + /* Remove endpoints from the host controller internal state */ + usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL); + /* Second pass: remove endpoint pointers */ + } for (i = skip_ep0; i < 16; ++i) { usb_disable_endpoint(dev, i, true); usb_disable_endpoint(dev, i + USB_DIR_IN, true); @@ -1273,6 +1293,8 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) interface); return -EINVAL; } + if (iface->unregistering) + return -ENODEV; alt = usb_altnum_to_altsetting(iface, alternate); if (!alt) { @@ -1727,6 +1749,7 @@ free_interfaces: /* if it's already configured, clear out old state first. * getting rid of old interfaces means unbinding their drivers. */ + mutex_lock(hcd->bandwidth_mutex); if (dev->state != USB_STATE_ADDRESS) usb_disable_device(dev, 1); /* Skip ep0 */ @@ -1739,7 +1762,6 @@ free_interfaces: * host controller will not allow submissions to dropped endpoints. If * this call fails, the device state is unchanged. */ - mutex_lock(hcd->bandwidth_mutex); ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL); if (ret < 0) { mutex_unlock(hcd->bandwidth_mutex); diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 2cd9a60c7f3a..4e4833168087 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -46,7 +46,6 @@ #include <asm/system.h> #include <asm/unaligned.h> #include <asm/dma.h> -#include <asm/cacheflush.h> #include "fsl_usb2_udc.h" @@ -118,6 +117,17 @@ static void (*_fsl_writel)(u32 v, unsigned __iomem *p); #define fsl_readl(p) (*_fsl_readl)((p)) #define fsl_writel(v, p) (*_fsl_writel)((v), (p)) +static inline void fsl_set_accessors(struct fsl_usb2_platform_data *pdata) +{ + if (pdata->big_endian_mmio) { + _fsl_readl = _fsl_readl_be; + _fsl_writel = _fsl_writel_be; + } else { + _fsl_readl = _fsl_readl_le; + _fsl_writel = _fsl_writel_le; + } +} + static inline u32 cpu_to_hc32(const u32 x) { return udc_controller->pdata->big_endian_desc @@ -132,6 +142,8 @@ static inline u32 hc32_to_cpu(const u32 x) : le32_to_cpu((__force __le32)x); } #else /* !CONFIG_PPC32 */ +static inline void fsl_set_accessors(struct fsl_usb2_platform_data *pdata) {} + #define fsl_readl(addr) readl(addr) #define fsl_writel(val32, addr) writel(val32, addr) #define cpu_to_hc32(x) cpu_to_le32(x) @@ -1277,6 +1289,11 @@ static int ep0_prime_status(struct fsl_udc *udc, int direction) req->req.complete = NULL; req->dtd_count = 0; + req->req.dma = dma_map_single(ep->udc->gadget.dev.parent, + req->req.buf, req->req.length, + ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + req->mapped = 1; + if (fsl_req_to_dtd(req) == 0) fsl_queue_td(ep, req); else @@ -1348,9 +1365,6 @@ static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value, /* Fill in the reqest structure */ *((u16 *) req->req.buf) = cpu_to_le16(tmp); - /* flush cache for the req buffer */ - flush_dcache_range((u32)req->req.buf, (u32)req->req.buf + 8); - req->ep = ep; req->req.length = 2; req->req.status = -EINPROGRESS; @@ -1358,6 +1372,11 @@ static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value, req->req.complete = NULL; req->dtd_count = 0; + req->req.dma = dma_map_single(ep->udc->gadget.dev.parent, + req->req.buf, req->req.length, + ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + req->mapped = 1; + /* prime the data phase */ if ((fsl_req_to_dtd(req) == 0)) fsl_queue_td(ep, req); @@ -2354,7 +2373,6 @@ static int __init struct_udc_setup(struct fsl_udc *udc, struct fsl_req, req); /* allocate a small amount of memory to get valid address */ udc->status_req->req.buf = kmalloc(8, GFP_KERNEL); - udc->status_req->req.dma = virt_to_phys(udc->status_req->req.buf); udc->resume_state = USB_STATE_NOTATTACHED; udc->usb_state = USB_STATE_POWERED; @@ -2470,13 +2488,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev) } /* Set accessors only after pdata->init() ! */ - if (pdata->big_endian_mmio) { - _fsl_readl = _fsl_readl_be; - _fsl_writel = _fsl_writel_be; - } else { - _fsl_readl = _fsl_readl_le; - _fsl_writel = _fsl_writel_le; - } + fsl_set_accessors(pdata); #ifndef CONFIG_ARCH_MXC if (pdata->have_sysif_regs) diff --git a/drivers/usb/host/ehci-ath79.c b/drivers/usb/host/ehci-ath79.c index 98cc8a13169c..aa248c2f2c60 100644 --- a/drivers/usb/host/ehci-ath79.c +++ b/drivers/usb/host/ehci-ath79.c @@ -44,7 +44,6 @@ static int ehci_ath79_init(struct usb_hcd *hcd) struct ehci_hcd *ehci = hcd_to_ehci(hcd); struct platform_device *pdev = to_platform_device(hcd->self.controller); const struct platform_device_id *id; - int hclength; int ret; id = platform_get_device_id(pdev); @@ -53,20 +52,23 @@ static int ehci_ath79_init(struct usb_hcd *hcd) return -EINVAL; } - hclength = HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); switch (id->driver_data) { case EHCI_ATH79_IP_V1: ehci->has_synopsys_hc_bug = 1; ehci->caps = hcd->regs; - ehci->regs = hcd->regs + hclength; + ehci->regs = hcd->regs + + HC_LENGTH(ehci, + ehci_readl(ehci, &ehci->caps->hc_capbase)); break; case EHCI_ATH79_IP_V2: hcd->has_tt = 1; ehci->caps = hcd->regs + 0x100; - ehci->regs = hcd->regs + 0x100 + hclength; + ehci->regs = hcd->regs + 0x100 + + HC_LENGTH(ehci, + ehci_readl(ehci, &ehci->caps->hc_capbase)); break; default: diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index b435ed67dd5c..f8030ee928e8 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1,4 +1,8 @@ /* + * Enhanced Host Controller Interface (EHCI) driver for USB. + * + * Maintainer: Alan Stern <stern@rowland.harvard.edu> + * * Copyright (c) 2000-2004 by David Brownell * * This program is free software; you can redistribute it and/or modify it diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index c9e6e454c625..55d3d5859ac5 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -1555,7 +1555,7 @@ static void kill_transfer(struct usb_hcd *hcd, struct urb *urb, /* We need to forcefully reclaim the slot since some transfers never return, e.g. interrupt transfers and NAKed bulk transfers. */ - if (usb_pipebulk(urb->pipe)) { + if (usb_pipecontrol(urb->pipe) || usb_pipebulk(urb->pipe)) { skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG); skip_map |= (1 << qh->slot); reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, skip_map); diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 9aa10bdf3918..f9cf3f04b742 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1,5 +1,7 @@ /* - * OHCI HCD (Host Controller Driver) for USB. + * Open Host Controller Interface (OHCI) driver for USB. + * + * Maintainer: Alan Stern <stern@rowland.harvard.edu> * * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net> diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index db6f8b9c19b6..4586369dda00 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -2517,6 +2517,7 @@ static int __devinit r8a66597_probe(struct platform_device *pdev) INIT_LIST_HEAD(&r8a66597->child_device); hcd->rsrc_start = res->start; + hcd->has_tt = 1; ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | irq_trigger); if (ret != 0) { diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 0f8e1d29a858..fcb7f7efc86d 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1215,8 +1215,6 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet)); /* dig out max burst from ep companion desc */ max_packet = ep->ss_ep_comp.bMaxBurst; - if (!max_packet) - xhci_warn(xhci, "WARN no SS endpoint bMaxBurst\n"); ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_packet)); break; case USB_SPEED_HIGH: diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 17541d09eabb..cb16de213f64 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -29,6 +29,9 @@ #define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000 +#define PCI_VENDOR_ID_ETRON 0x1b6f +#define PCI_DEVICE_ID_ASROCK_P67 0x7023 + static const char hcd_name[] = "xhci_hcd"; /* called after powerup, by probe or system-pm "wakeup" */ @@ -134,6 +137,11 @@ static int xhci_pci_setup(struct usb_hcd *hcd) xhci->quirks |= XHCI_EP_LIMIT_QUIRK; xhci->limit_active_eps = 64; } + if (pdev->vendor == PCI_VENDOR_ID_ETRON && + pdev->device == PCI_DEVICE_ID_ASROCK_P67) { + xhci->quirks |= XHCI_RESET_ON_RESUME; + xhci_dbg(xhci, "QUIRK: Resetting on resume\n"); + } /* Make sure the HC is halted. */ retval = xhci_halt(xhci); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 800f417c7309..70cacbbe7fb9 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1733,6 +1733,7 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, frame->status = -EOVERFLOW; skip_td = true; break; + case COMP_DEV_ERR: case COMP_STALL: frame->status = -EPROTO; skip_td = true; @@ -1767,9 +1768,6 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, } } - if ((idx == urb_priv->length - 1) && *status == -EINPROGRESS) - *status = 0; - return finish_td(xhci, td, event_trb, event, ep, status, false); } @@ -1787,8 +1785,7 @@ static int skip_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, idx = urb_priv->td_cnt; frame = &td->urb->iso_frame_desc[idx]; - /* The transfer is partly done */ - *status = -EXDEV; + /* The transfer is partly done. */ frame->status = -EXDEV; /* calc actual length */ @@ -2016,6 +2013,10 @@ static int handle_tx_event(struct xhci_hcd *xhci, TRB_TO_SLOT_ID(le32_to_cpu(event->flags)), ep_index); goto cleanup; + case COMP_DEV_ERR: + xhci_warn(xhci, "WARN: detect an incompatible device"); + status = -EPROTO; + break; case COMP_MISSED_INT: /* * When encounter missed service error, one or more isoc tds @@ -2063,6 +2064,20 @@ static int handle_tx_event(struct xhci_hcd *xhci, /* Is this a TRB in the currently executing TD? */ event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue, td->last_trb, event_dma); + + /* + * Skip the Force Stopped Event. The event_trb(event_dma) of FSE + * is not in the current TD pointed by ep_ring->dequeue because + * that the hardware dequeue pointer still at the previous TRB + * of the current TD. The previous TRB maybe a Link TD or the + * last TRB of the previous TD. The command completion handle + * will take care the rest. + */ + if (!event_seg && trb_comp_code == COMP_STOP_INVAL) { + ret = 0; + goto cleanup; + } + if (!event_seg) { if (!ep->skip || !usb_endpoint_xfer_isoc(&td->urb->ep->desc)) { @@ -2158,6 +2173,11 @@ cleanup: urb->transfer_buffer_length, status); spin_unlock(&xhci->lock); + /* EHCI, UHCI, and OHCI always unconditionally set the + * urb->status of an isochronous endpoint to 0. + */ + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) + status = 0; usb_hcd_giveback_urb(bus_to_hcd(urb->dev->bus), urb, status); spin_lock(&xhci->lock); } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 06e7023258d0..f5fe1ac301ab 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -759,6 +759,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) msleep(100); spin_lock_irq(&xhci->lock); + if (xhci->quirks & XHCI_RESET_ON_RESUME) + hibernated = true; if (!hibernated) { /* step 1: restore register */ @@ -1401,6 +1403,7 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, u32 added_ctxs; unsigned int last_ctx; u32 new_add_flags, new_drop_flags, new_slot_info; + struct xhci_virt_device *virt_dev; int ret = 0; ret = xhci_check_args(hcd, udev, ep, 1, true, __func__); @@ -1425,11 +1428,25 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, return 0; } - in_ctx = xhci->devs[udev->slot_id]->in_ctx; - out_ctx = xhci->devs[udev->slot_id]->out_ctx; + virt_dev = xhci->devs[udev->slot_id]; + in_ctx = virt_dev->in_ctx; + out_ctx = virt_dev->out_ctx; ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); ep_index = xhci_get_endpoint_index(&ep->desc); ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index); + + /* If this endpoint is already in use, and the upper layers are trying + * to add it again without dropping it, reject the addition. + */ + if (virt_dev->eps[ep_index].ring && + !(le32_to_cpu(ctrl_ctx->drop_flags) & + xhci_get_endpoint_flag(&ep->desc))) { + xhci_warn(xhci, "Trying to add endpoint 0x%x " + "without dropping it.\n", + (unsigned int) ep->desc.bEndpointAddress); + return -EINVAL; + } + /* If the HCD has already noted the endpoint is enabled, * ignore this request. */ @@ -1445,8 +1462,7 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, * process context, not interrupt context (or so documenation * for usb_set_interface() and usb_set_configuration() claim). */ - if (xhci_endpoint_init(xhci, xhci->devs[udev->slot_id], - udev, ep, GFP_NOIO) < 0) { + if (xhci_endpoint_init(xhci, virt_dev, udev, ep, GFP_NOIO) < 0) { dev_dbg(&udev->dev, "%s - could not initialize ep %#x\n", __func__, ep->desc.bEndpointAddress); return -ENOMEM; @@ -1537,6 +1553,11 @@ static int xhci_configure_endpoint_result(struct xhci_hcd *xhci, "and endpoint is not disabled.\n"); ret = -EINVAL; break; + case COMP_DEV_ERR: + dev_warn(&udev->dev, "ERROR: Incompatible device for endpoint " + "configure command.\n"); + ret = -ENODEV; + break; case COMP_SUCCESS: dev_dbg(&udev->dev, "Successful Endpoint Configure command\n"); ret = 0; @@ -1571,6 +1592,11 @@ static int xhci_evaluate_context_result(struct xhci_hcd *xhci, xhci_dbg_ctx(xhci, virt_dev->out_ctx, 1); ret = -EINVAL; break; + case COMP_DEV_ERR: + dev_warn(&udev->dev, "ERROR: Incompatible device for evaluate " + "context command.\n"); + ret = -ENODEV; + break; case COMP_MEL_ERR: /* Max Exit Latency too large error */ dev_warn(&udev->dev, "WARN: Max Exit Latency too large\n"); @@ -2853,6 +2879,11 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) dev_warn(&udev->dev, "Device not responding to set address.\n"); ret = -EPROTO; break; + case COMP_DEV_ERR: + dev_warn(&udev->dev, "ERROR: Incompatible device for address " + "device command.\n"); + ret = -ENODEV; + break; case COMP_SUCCESS: xhci_dbg(xhci, "Successful Address Device command\n"); break; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 7d1ea3bf5e1f..d8bbf5ccb10d 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -874,6 +874,8 @@ struct xhci_transfer_event { #define COMP_PING_ERR 20 /* Event Ring is full */ #define COMP_ER_FULL 21 +/* Incompatible Device Error */ +#define COMP_DEV_ERR 22 /* Missed Service Error - HC couldn't service an isoc ep within interval */ #define COMP_MISSED_INT 23 /* Successfully stopped command ring */ @@ -1308,6 +1310,7 @@ struct xhci_hcd { */ #define XHCI_EP_LIMIT_QUIRK (1 << 5) #define XHCI_BROKEN_MSI (1 << 6) +#define XHCI_RESET_ON_RESUME (1 << 7) unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 0a50a35e1853..6aeb363e63e7 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1524,6 +1524,12 @@ static void musb_gadget_fifo_flush(struct usb_ep *ep) csr = musb_readw(epio, MUSB_TXCSR); if (csr & MUSB_TXCSR_FIFONOTEMPTY) { csr |= MUSB_TXCSR_FLUSHFIFO | MUSB_TXCSR_P_WZC_BITS; + /* + * Setting both TXPKTRDY and FLUSHFIFO makes controller + * to interrupt current FIFO loading, but not flushing + * the already loaded ones. + */ + csr &= ~MUSB_TXCSR_TXPKTRDY; musb_writew(epio, MUSB_TXCSR, csr); /* REVISIT may be inappropriate w/o FIFONOTEMPTY ... */ musb_writew(epio, MUSB_TXCSR, csr); diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 7295e316bdfc..8b2473fa0f47 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1575,7 +1575,7 @@ void musb_host_rx(struct musb *musb, u8 epnum) /* even if there was an error, we did the dma * for iso_frame_desc->length */ - if (d->status != EILSEQ && d->status != -EOVERFLOW) + if (d->status != -EILSEQ && d->status != -EOVERFLOW) d->status = 0; if (++qh->iso_idx >= urb->number_of_packets) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 162728977553..2e06b90aa1f8 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -179,6 +179,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_232RL_PID) }, { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) }, { USB_DEVICE(FTDI_VID, FTDI_4232H_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_232H_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) }, { USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) }, @@ -848,7 +849,8 @@ static const char *ftdi_chip_name[] = { [FT2232C] = "FT2232C", [FT232RL] = "FT232RL", [FT2232H] = "FT2232H", - [FT4232H] = "FT4232H" + [FT4232H] = "FT4232H", + [FT232H] = "FT232H" }; @@ -1168,6 +1170,7 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty, break; case FT2232H: /* FT2232H chip */ case FT4232H: /* FT4232H chip */ + case FT232H: /* FT232H chip */ if ((baud <= 12000000) & (baud >= 1200)) { div_value = ftdi_2232h_baud_to_divisor(baud); } else if (baud < 1200) { @@ -1429,9 +1432,12 @@ static void ftdi_determine_type(struct usb_serial_port *port) } else if (version < 0x600) { /* Assume it's an FT232BM (or FT245BM) */ priv->chip_type = FT232BM; - } else { - /* Assume it's an FT232R */ + } else if (version < 0x900) { + /* Assume it's an FT232RL */ priv->chip_type = FT232RL; + } else { + /* Assume it's an FT232H */ + priv->chip_type = FT232H; } dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]); } @@ -1559,7 +1565,8 @@ static int create_sysfs_attrs(struct usb_serial_port *port) priv->chip_type == FT2232C || priv->chip_type == FT232RL || priv->chip_type == FT2232H || - priv->chip_type == FT4232H)) { + priv->chip_type == FT4232H || + priv->chip_type == FT232H)) { retval = device_create_file(&port->dev, &dev_attr_latency_timer); } @@ -1580,7 +1587,8 @@ static void remove_sysfs_attrs(struct usb_serial_port *port) priv->chip_type == FT2232C || priv->chip_type == FT232RL || priv->chip_type == FT2232H || - priv->chip_type == FT4232H) { + priv->chip_type == FT4232H || + priv->chip_type == FT232H) { device_remove_file(&port->dev, &dev_attr_latency_timer); } } @@ -2212,6 +2220,7 @@ static int ftdi_tiocmget(struct tty_struct *tty) case FT232RL: case FT2232H: case FT4232H: + case FT232H: len = 2; break; default: diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 213fe3d61282..19584faa86f9 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -156,7 +156,8 @@ enum ftdi_chip_type { FT2232C = 4, FT232RL = 5, FT2232H = 6, - FT4232H = 7 + FT4232H = 7, + FT232H = 8 }; enum ftdi_sio_baudrate { diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index ab1fcdf3c378..19156d1049fe 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -22,6 +22,7 @@ #define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */ #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */ #define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */ +#define FTDI_232H_PID 0x6014 /* Single channel hi-speed device */ #define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ #define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */ diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index c6d92a530086..ea8445689c85 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -1745,6 +1745,7 @@ static int ti_download_firmware(struct ti_device *tdev) } if (fw_p->size > TI_FIRMWARE_BUF_SIZE) { dev_err(&dev->dev, "%s - firmware too large %zu\n", __func__, fw_p->size); + release_firmware(fw_p); return -ENOENT; } diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c index 5fc983c5b92c..cf03ad067147 100644 --- a/drivers/video/amba-clcd.c +++ b/drivers/video/amba-clcd.c @@ -447,6 +447,8 @@ static int clcdfb_register(struct clcd_fb *fb) goto out; } + fb->fb.device = &fb->dev->dev; + fb->fb.fix.mmio_start = fb->dev->res.start; fb->fb.fix.mmio_len = resource_size(&fb->dev->res); diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c index bedf5be27f05..0acc7d65aeaa 100644 --- a/drivers/video/fsl-diu-fb.c +++ b/drivers/video/fsl-diu-fb.c @@ -555,8 +555,6 @@ static void adjust_aoi_size_position(struct fb_var_screeninfo *var, static int fsl_diu_check_var(struct fb_var_screeninfo *var, struct fb_info *info) { - unsigned long htotal, vtotal; - pr_debug("check_var xres: %d\n", var->xres); pr_debug("check_var yres: %d\n", var->yres); @@ -635,20 +633,6 @@ static int fsl_diu_check_var(struct fb_var_screeninfo *var, break; } - /* If the pixclock is below the minimum spec'd value then set to - * refresh rate for 60Hz since this is supported by most monitors. - * Refer to Documentation/fb/ for calculations. - */ - if ((var->pixclock < MIN_PIX_CLK) || (var->pixclock > MAX_PIX_CLK)) { - htotal = var->xres + var->right_margin + var->hsync_len + - var->left_margin; - vtotal = var->yres + var->lower_margin + var->vsync_len + - var->upper_margin; - var->pixclock = (vtotal * htotal * 6UL) / 100UL; - var->pixclock = KHZ2PICOS(var->pixclock); - pr_debug("pixclock set for 60Hz refresh = %u ps\n", - var->pixclock); - } var->height = -1; var->width = -1; diff --git a/drivers/video/geode/gx1fb_core.c b/drivers/video/geode/gx1fb_core.c index c6b554f72c6d..5a5d0928df33 100644 --- a/drivers/video/geode/gx1fb_core.c +++ b/drivers/video/geode/gx1fb_core.c @@ -29,7 +29,7 @@ static int crt_option = 1; static char panel_option[32] = ""; /* Modes relevant to the GX1 (taken from modedb.c) */ -static const struct fb_videomode __initdata gx1_modedb[] = { +static const struct fb_videomode __devinitdata gx1_modedb[] = { /* 640x480-60 VESA */ { NULL, 60, 640, 480, 39682, 48, 16, 33, 10, 96, 2, 0, FB_VMODE_NONINTERLACED, FB_MODE_IS_VESA }, @@ -195,7 +195,7 @@ static int gx1fb_blank(int blank_mode, struct fb_info *info) return par->vid_ops->blank_display(info, blank_mode); } -static int __init gx1fb_map_video_memory(struct fb_info *info, struct pci_dev *dev) +static int __devinit gx1fb_map_video_memory(struct fb_info *info, struct pci_dev *dev) { struct geodefb_par *par = info->par; unsigned gx_base; @@ -268,7 +268,7 @@ static struct fb_ops gx1fb_ops = { .fb_imageblit = cfb_imageblit, }; -static struct fb_info * __init gx1fb_init_fbinfo(struct device *dev) +static struct fb_info * __devinit gx1fb_init_fbinfo(struct device *dev) { struct geodefb_par *par; struct fb_info *info; @@ -318,7 +318,7 @@ static struct fb_info * __init gx1fb_init_fbinfo(struct device *dev) return info; } -static int __init gx1fb_probe(struct pci_dev *pdev, const struct pci_device_id *id) +static int __devinit gx1fb_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct geodefb_par *par; struct fb_info *info; @@ -382,7 +382,7 @@ static int __init gx1fb_probe(struct pci_dev *pdev, const struct pci_device_id * return ret; } -static void gx1fb_remove(struct pci_dev *pdev) +static void __devexit gx1fb_remove(struct pci_dev *pdev) { struct fb_info *info = pci_get_drvdata(pdev); struct geodefb_par *par = info->par; @@ -441,7 +441,7 @@ static struct pci_driver gx1fb_driver = { .name = "gx1fb", .id_table = gx1fb_id_table, .probe = gx1fb_probe, - .remove = gx1fb_remove, + .remove = __devexit_p(gx1fb_remove), }; static int __init gx1fb_init(void) @@ -456,7 +456,7 @@ static int __init gx1fb_init(void) return pci_register_driver(&gx1fb_driver); } -static void __exit gx1fb_cleanup(void) +static void __devexit gx1fb_cleanup(void) { pci_unregister_driver(&gx1fb_driver); } diff --git a/drivers/video/hecubafb.c b/drivers/video/hecubafb.c index fbef15f7a218..614251a9af91 100644 --- a/drivers/video/hecubafb.c +++ b/drivers/video/hecubafb.c @@ -233,7 +233,7 @@ static int __devinit hecubafb_probe(struct platform_device *dev) videomemory = vzalloc(videomemorysize); if (!videomemory) - return retval; + goto err_videomem_alloc; info = framebuffer_alloc(sizeof(struct hecubafb_par), &dev->dev); if (!info) @@ -275,6 +275,7 @@ err_fbreg: framebuffer_release(info); err_fballoc: vfree(videomemory); +err_videomem_alloc: module_put(board->owner); return retval; } diff --git a/drivers/video/sh_mobile_meram.c b/drivers/video/sh_mobile_meram.c index 9170c82b495c..cc7d7329dc15 100644 --- a/drivers/video/sh_mobile_meram.c +++ b/drivers/video/sh_mobile_meram.c @@ -218,7 +218,7 @@ static inline void meram_get_next_icb_addr(struct sh_mobile_meram_info *pdata, icb_offset = 0xc0000000 | (cfg->current_reg << 23); *icb_addr_y = icb_offset | (cfg->icb[0].marker_icb << 24); - if ((*icb_addr_c) && is_nvcolor(cfg->pixelformat)) + if (is_nvcolor(cfg->pixelformat)) *icb_addr_c = icb_offset | (cfg->icb[1].marker_icb << 24); } diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c index 87f0be1e78b5..6294dca95500 100644 --- a/drivers/video/sm501fb.c +++ b/drivers/video/sm501fb.c @@ -1664,7 +1664,7 @@ static void sm501fb_stop(struct sm501fb_info *info) resource_size(info->regs_res)); } -static int sm501fb_init_fb(struct fb_info *fb, +static int __devinit sm501fb_init_fb(struct fb_info *fb, enum sm501_controller head, const char *fbname) { diff --git a/drivers/video/udlfb.c b/drivers/video/udlfb.c index 52b0f3e8ccac..816a4fda04f5 100644 --- a/drivers/video/udlfb.c +++ b/drivers/video/udlfb.c @@ -1233,8 +1233,12 @@ static int dlfb_setup_modes(struct dlfb_data *dev, if (dlfb_is_valid_mode(&info->monspecs.modedb[i], info)) fb_add_videomode(&info->monspecs.modedb[i], &info->modelist); - else /* if we've removed top/best mode */ - info->monspecs.misc &= ~FB_MISC_1ST_DETAIL; + else { + if (i == 0) + /* if we've removed top/best mode */ + info->monspecs.misc + &= ~FB_MISC_1ST_DETAIL; + } } default_vmode = fb_find_best_display(&info->monspecs, diff --git a/drivers/video/vesafb.c b/drivers/video/vesafb.c index a99bbe86db13..501b3406c6d5 100644 --- a/drivers/video/vesafb.c +++ b/drivers/video/vesafb.c @@ -175,6 +175,7 @@ static int vesafb_setcolreg(unsigned regno, unsigned red, unsigned green, static void vesafb_destroy(struct fb_info *info) { + fb_dealloc_cmap(&info->cmap); if (info->screen_base) iounmap(info->screen_base); release_mem_region(info->apertures->ranges[0].base, info->apertures->ranges[0].size); diff --git a/drivers/w1/masters/ds1wm.c b/drivers/w1/masters/ds1wm.c index ad57593d224a..a0c8965c1a79 100644 --- a/drivers/w1/masters/ds1wm.c +++ b/drivers/w1/masters/ds1wm.c @@ -109,6 +109,7 @@ struct ds1wm_data { /* byte to write that makes all intr disabled, */ /* considering active_state (IAS) (optimization) */ u8 int_en_reg_none; + unsigned int reset_recover_delay; /* see ds1wm.h */ }; static inline void ds1wm_write_register(struct ds1wm_data *ds1wm_data, u32 reg, @@ -187,6 +188,9 @@ static int ds1wm_reset(struct ds1wm_data *ds1wm_data) return 1; } + if (ds1wm_data->reset_recover_delay) + msleep(ds1wm_data->reset_recover_delay); + return 0; } @@ -490,6 +494,7 @@ static int ds1wm_probe(struct platform_device *pdev) } ds1wm_data->irq = res->start; ds1wm_data->int_en_reg_none = (plat->active_high ? DS1WM_INTEN_IAS : 0); + ds1wm_data->reset_recover_delay = plat->reset_recover_delay; if (res->flags & IORESOURCE_IRQ_HIGHEDGE) irq_set_irq_type(ds1wm_data->irq, IRQ_TYPE_EDGE_RISING); diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 022f9eb0b7bf..9536d386bb38 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -535,8 +535,7 @@ config I6300ESB_WDT config INTEL_SCU_WATCHDOG bool "Intel SCU Watchdog for Mobile Platforms" - depends on WATCHDOG - depends on INTEL_SCU_IPC + depends on X86_MRST ---help--- Hardware driver for the watchdog time built into the Intel SCU for Intel Mobile Platforms. diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c index 750bc5281d79..4ca5d40304b2 100644 --- a/drivers/watchdog/at32ap700x_wdt.c +++ b/drivers/watchdog/at32ap700x_wdt.c @@ -448,7 +448,7 @@ static void __exit at32_wdt_exit(void) } module_exit(at32_wdt_exit); -MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>"); +MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>"); MODULE_DESCRIPTION("Watchdog driver for Atmel AT32AP700X"); MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); diff --git a/drivers/watchdog/gef_wdt.c b/drivers/watchdog/gef_wdt.c index 29a7cd4b90c8..b146082bd85a 100644 --- a/drivers/watchdog/gef_wdt.c +++ b/drivers/watchdog/gef_wdt.c @@ -329,4 +329,4 @@ MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com>"); MODULE_DESCRIPTION("GE watchdog driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -MODULE_ALIAS("platform: gef_wdt"); +MODULE_ALIAS("platform:gef_wdt"); diff --git a/drivers/watchdog/intel_scu_watchdog.c b/drivers/watchdog/intel_scu_watchdog.c index 919bdd16136f..ba4386066a42 100644 --- a/drivers/watchdog/intel_scu_watchdog.c +++ b/drivers/watchdog/intel_scu_watchdog.c @@ -42,7 +42,6 @@ #include <linux/sched.h> #include <linux/signal.h> #include <linux/sfi.h> -#include <linux/types.h> #include <asm/irq.h> #include <asm/atomic.h> #include <asm/intel_scu_ipc.h> diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c index 1479dc4d6129..0430e093b1a0 100644 --- a/drivers/watchdog/mtx-1_wdt.c +++ b/drivers/watchdog/mtx-1_wdt.c @@ -66,23 +66,18 @@ static struct { int default_ticks; unsigned long inuse; unsigned gpio; - int gstate; + unsigned int gstate; } mtx1_wdt_device; static void mtx1_wdt_trigger(unsigned long unused) { - u32 tmp; - spin_lock(&mtx1_wdt_device.lock); if (mtx1_wdt_device.running) ticks--; /* toggle wdt gpio */ - mtx1_wdt_device.gstate = ~mtx1_wdt_device.gstate; - if (mtx1_wdt_device.gstate) - gpio_direction_output(mtx1_wdt_device.gpio, 1); - else - gpio_direction_input(mtx1_wdt_device.gpio); + mtx1_wdt_device.gstate = !mtx1_wdt_device.gstate; + gpio_set_value(mtx1_wdt_device.gpio, mtx1_wdt_device.gstate); if (mtx1_wdt_device.queue && ticks) mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL); @@ -105,7 +100,7 @@ static void mtx1_wdt_start(void) if (!mtx1_wdt_device.queue) { mtx1_wdt_device.queue = 1; mtx1_wdt_device.gstate = 1; - gpio_direction_output(mtx1_wdt_device.gpio, 1); + gpio_set_value(mtx1_wdt_device.gpio, 1); mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL); } mtx1_wdt_device.running++; @@ -120,7 +115,7 @@ static int mtx1_wdt_stop(void) if (mtx1_wdt_device.queue) { mtx1_wdt_device.queue = 0; mtx1_wdt_device.gstate = 0; - gpio_direction_output(mtx1_wdt_device.gpio, 0); + gpio_set_value(mtx1_wdt_device.gpio, 0); } ticks = mtx1_wdt_device.default_ticks; spin_unlock_irqrestore(&mtx1_wdt_device.lock, flags); @@ -214,6 +209,12 @@ static int __devinit mtx1_wdt_probe(struct platform_device *pdev) int ret; mtx1_wdt_device.gpio = pdev->resource[0].start; + ret = gpio_request_one(mtx1_wdt_device.gpio, + GPIOF_OUT_INIT_HIGH, "mtx1-wdt"); + if (ret < 0) { + dev_err(&pdev->dev, "failed to request gpio"); + return ret; + } spin_lock_init(&mtx1_wdt_device.lock); init_completion(&mtx1_wdt_device.stop); @@ -239,11 +240,13 @@ static int __devexit mtx1_wdt_remove(struct platform_device *pdev) mtx1_wdt_device.queue = 0; wait_for_completion(&mtx1_wdt_device.stop); } + + gpio_free(mtx1_wdt_device.gpio); misc_deregister(&mtx1_wdt_misc); return 0; } -static struct platform_driver mtx1_wdt = { +static struct platform_driver mtx1_wdt_driver = { .probe = mtx1_wdt_probe, .remove = __devexit_p(mtx1_wdt_remove), .driver.name = "mtx1-wdt", @@ -252,12 +255,12 @@ static struct platform_driver mtx1_wdt = { static int __init mtx1_wdt_init(void) { - return platform_driver_register(&mtx1_wdt); + return platform_driver_register(&mtx1_wdt_driver); } static void __exit mtx1_wdt_exit(void) { - platform_driver_unregister(&mtx1_wdt); + platform_driver_unregister(&mtx1_wdt_driver); } module_init(mtx1_wdt_init); diff --git a/drivers/watchdog/wm831x_wdt.c b/drivers/watchdog/wm831x_wdt.c index 8c4b2d5bb7da..871caea4e1c6 100644 --- a/drivers/watchdog/wm831x_wdt.c +++ b/drivers/watchdog/wm831x_wdt.c @@ -320,6 +320,11 @@ static int __devinit wm831x_wdt_probe(struct platform_device *pdev) struct wm831x_watchdog_pdata *pdata; int reg, ret; + if (wm831x) { + dev_err(&pdev->dev, "wm831x watchdog already registered\n"); + return -EBUSY; + } + wm831x = dev_get_drvdata(pdev->dev.parent); ret = wm831x_reg_read(wm831x, WM831X_WATCHDOG); diff --git a/drivers/xen/events.c b/drivers/xen/events.c index 553da68bd510..30df85d8fca8 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -395,9 +395,9 @@ static void unmask_evtchn(int port) static void xen_irq_init(unsigned irq) { struct irq_info *info; +#ifdef CONFIG_SMP struct irq_desc *desc = irq_to_desc(irq); -#ifdef CONFIG_SMP /* By default all event channels notify CPU#0. */ cpumask_copy(desc->irq_data.affinity, cpumask_of(0)); #endif |