diff options
Diffstat (limited to 'include/asm-blackfin/mach-bf533/anomaly.h')
| -rw-r--r-- | include/asm-blackfin/mach-bf533/anomaly.h | 175 |
1 files changed, 175 insertions, 0 deletions
diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/include/asm-blackfin/mach-bf533/anomaly.h new file mode 100644 index 000000000000..a84d3909345e --- /dev/null +++ b/include/asm-blackfin/mach-bf533/anomaly.h @@ -0,0 +1,175 @@ +/* + * File: include/asm-blackfin/mach-bf533/anomaly.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* This file shoule be up to date with: + * - Revision U, May 17, 2006; ADSP-BF533 Blackfin Processor Anomaly List + * - Revision Y, May 17, 2006; ADSP-BF532 Blackfin Processor Anomaly List + * - Revision T, May 17, 2006; ADSP-BF531 Blackfin Processor Anomaly List + */ + +#ifndef _MACH_ANOMALY_H_ +#define _MACH_ANOMALY_H_ + +/* We do not support 0.1 or 0.2 silicon - sorry */ +#if (defined(CONFIG_BF_REV_0_1) || defined(CONFIG_BF_REV_0_2)) +#error Kernel will not work on BF533 Version 0.1 or 0.2 +#endif + +/* Issues that are common to 0.5, 0.4, and 0.3 silicon */ +#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_4) || defined(CONFIG_BF_REV_0_3)) +#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in + slot1 and store of a P register in slot 2 is not + supported */ +#define ANOMALY_05000105 /* Watchpoint Status Register (WPSTAT) bits are set on + every corresponding match */ +#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive + Channel DMA stops */ +#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR + registers. */ +#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out + upper bits*/ +#define ANOMALY_05000167 /* Turning Serial Ports on With External Frame Syncs */ +#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame + syncs */ +#define ANOMALY_05000208 /* VSTAT status bit in PLL_STAT register is not + functional */ +#define ANOMALY_05000219 /* NMI event at boot time results in unpredictable + state */ +#define ANOMALY_05000229 /* SPI Slave Boot Mode modifies registers */ +#define ANOMALY_05000272 /* Certain data cache write through modes fail for + VDDint <=0.9V */ +#define ANOMALY_05000273 /* Writes to Synchronous SDRAM memory may be lost */ +#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after + an edge is detected may clear interrupt */ +#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause + DMA system instability */ +#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is + not restored */ +#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic + control */ +#define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when + killed in a particular stage*/ +#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC + registers are interrupted */ +#define ANOMALY_05000311 /* Erroneous flag pin operations under specific sequences*/ + +#endif + +/* These issues only occur on 0.3 or 0.4 BF533 */ +#if (defined(CONFIG_BF_REV_0_4) || defined(CONFIG_BF_REV_0_3)) +#define ANOMALY_05000099 /* UART Line Status Register (UART_LSR) bits are not + updated at the same time. */ +#define ANOMALY_05000158 /* Boot fails when data cache enabled: Data from a Data + Cache Fill can be corrupted after or during + Instruction DMA if certain core stalls exist */ +#define ANOMALY_05000179 /* PPI_COUNT cannot be programmed to 0 in General + Purpose TX or RX modes */ +#define ANOMALY_05000198 /* Failing SYSTEM MMR accesses when stalled by + preceding memory read */ +#define ANOMALY_05000200 /* SPORT TFS and DT are incorrectly driven during + inactive channels in certain conditions */ +#define ANOMALY_05000202 /* Possible infinite stall with specific dual dag + situation */ +#define ANOMALY_05000215 /* UART TX Interrupt masked erroneously */ +#define ANOMALY_05000225 /* Incorrect pulse-width of UART start-bit */ +#define ANOMALY_05000227 /* Scratchpad memory bank reads may return incorrect + data*/ +#define ANOMALY_05000230 /* UART Receiver is less robust against Baudrate + Differences in certain Conditions */ +#define ANOMALY_05000231 /* UART STB bit incorrectly affects receiver setting */ +#define ANOMALY_05000242 /* DF bit in PLL_CTL register does not respond to + hardware reset */ +#define ANOMALY_05000244 /* With instruction cache enabled, a CSYNC or SSYNC or + IDLE around a Change of Control causes + unpredictable results */ +#define ANOMALY_05000245 /* Spurious Hardware Error from an access in the + shadow of a conditional branch */ +#define ANOMALY_05000246 /* Data CPLB's should prevent spurious hardware + errors */ +#define ANOMALY_05000253 /* Maximum external clock speed for Timers */ +#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event + interrupt not functional */ +#define ANOMALY_05000257 /* An interrupt or exception during short Hardware + loops may cause the instruction fetch unit to + malfunction */ +#define ANOMALY_05000258 /* Instruction Cache is corrupted when bit 9 and 12 of + the ICPLB Data registers differ */ +#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */ +#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */ +#define ANOMALY_05000262 /* Stores to data cache may be lost */ +#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB exception */ +#define ANOMALY_05000264 /* A Sync instruction (CSYNC, SSYNC) or an IDLE + instruction will cause an infinite stall in the + second to last instruction in a hardware loop */ +#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on + SPORT external receive and transmit clocks. */ +#define ANOMALY_05000269 /* High I/O activity causes the output voltage of the + internal voltage regulator (VDDint) to increase. */ +#define ANOMALY_05000270 /* High I/O activity causes the output voltage of the + internal voltage regulator (VDDint) to decrease */ +#endif + +/* These issues are only on 0.4 silicon */ +#if (defined(CONFIG_BF_REV_0_4)) +#define ANOMALY_05000234 /* Incorrect Revision Number in DSPID Register */ +#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel + (TDM) */ +#endif + +/* These issues are only on 0.3 silicon */ +#if defined(CONFIG_BF_REV_0_3) +#define ANOMALY_05000183 /* Timer Pin limitations for PPI TX Modes with + External Frame Syncs */ +#define ANOMALY_05000189 /* False Protection Exceptions caused by Speculative + Instruction or Data Fetches, or by Fetches at the + boundary of reserved memory space */ +#define ANOMALY_05000193 /* False Flag Pin Interrupts on Edge Sensitive Inputs + when polarity setting is changed */ +#define ANOMALY_05000194 /* Sport Restarting in specific modes may cause data + corruption */ +#define ANOMALY_05000199 /* DMA current address shows wrong value during carry + fix */ +#define ANOMALY_05000201 /* Receive frame sync not ignored during active + frames in sport MCM */ +#define ANOMALY_05000203 /* Specific sequence that can cause DMA error or DMA + stopping */ +#if defined(CONFIG_BF533) +#define ANOMALY_05000204 /* Incorrect data read with write-through cache and + allocate cache lines on reads only mode */ +#endif /* CONFIG_BF533 */ +#define ANOMALY_05000207 /* Recovery from "brown-out" condition */ +#define ANOMALY_05000209 /* Speed-Path in computational unit affects certain + instructions */ +#define ANOMALY_05000233 /* PPI_FS3 is not driven in 2 or 3 internal Frame + Sync Transmit Mode */ +#define ANOMALY_05000271 /* Spontaneous reset of Internal Voltage Regulator */ +#endif + +#endif /* _MACH_ANOMALY_H_ */ |