diff options
Diffstat (limited to 'include/linux/iio/adc/qcom-vadc-common.h')
| -rw-r--r-- | include/linux/iio/adc/qcom-vadc-common.h | 171 |
1 files changed, 171 insertions, 0 deletions
diff --git a/include/linux/iio/adc/qcom-vadc-common.h b/include/linux/iio/adc/qcom-vadc-common.h new file mode 100644 index 000000000000..58216124d89d --- /dev/null +++ b/include/linux/iio/adc/qcom-vadc-common.h @@ -0,0 +1,171 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Code shared between the different Qualcomm PMIC voltage ADCs + */ + +#ifndef QCOM_VADC_COMMON_H +#define QCOM_VADC_COMMON_H + +#include <linux/types.h> + +#define VADC_CONV_TIME_MIN_US 2000 +#define VADC_CONV_TIME_MAX_US 2100 + +/* Min ADC code represents 0V */ +#define VADC_MIN_ADC_CODE 0x6000 +/* Max ADC code represents full-scale range of 1.8V */ +#define VADC_MAX_ADC_CODE 0xa800 + +#define VADC_ABSOLUTE_RANGE_UV 625000 +#define VADC_RATIOMETRIC_RANGE 1800 + +#define VADC_DEF_PRESCALING 0 /* 1:1 */ +#define VADC_DEF_DECIMATION 0 /* 512 */ +#define VADC_DEF_HW_SETTLE_TIME 0 /* 0 us */ +#define VADC_DEF_AVG_SAMPLES 0 /* 1 sample */ +#define VADC_DEF_CALIB_TYPE VADC_CALIB_ABSOLUTE + +#define VADC_DECIMATION_MIN 512 +#define VADC_DECIMATION_MAX 4096 +#define ADC5_DEF_VBAT_PRESCALING 1 /* 1:3 */ +#define ADC5_DECIMATION_SHORT 250 +#define ADC5_DECIMATION_MEDIUM 420 +#define ADC5_DECIMATION_LONG 840 +/* Default decimation - 1024 for rev2, 840 for pmic5 */ +#define ADC5_DECIMATION_DEFAULT 2 +#define ADC5_DECIMATION_SAMPLES_MAX 3 + +#define VADC_HW_SETTLE_DELAY_MAX 10000 +#define VADC_HW_SETTLE_SAMPLES_MAX 16 +#define VADC_AVG_SAMPLES_MAX 512 +#define ADC5_AVG_SAMPLES_MAX 16 + +#define PMIC5_CHG_TEMP_SCALE_FACTOR 377500 +#define PMIC5_SMB_TEMP_CONSTANT 419400 +#define PMIC5_SMB_TEMP_SCALE_FACTOR 356 + +#define PMI_CHG_SCALE_1 -138890 +#define PMI_CHG_SCALE_2 391750000000LL + +#define VADC5_MAX_CODE 0x7fff +#define ADC5_FULL_SCALE_CODE 0x70e4 +#define ADC5_USR_DATA_CHECK 0x8000 + +#define R_PU_100K 100000 +#define RATIO_MAX_ADC7 BIT(14) + +/* + * VADC_CALIB_ABSOLUTE: uses the 625mV and 1.25V as reference channels. + * VADC_CALIB_RATIOMETRIC: uses the reference voltage (1.8V) and GND for + * calibration. + */ +enum vadc_calibration { + VADC_CALIB_ABSOLUTE = 0, + VADC_CALIB_RATIOMETRIC +}; + +/** + * struct vadc_linear_graph - Represent ADC characteristics. + * @dy: numerator slope to calculate the gain. + * @dx: denominator slope to calculate the gain. + * @gnd: A/D word of the ground reference used for the channel. + * + * Each ADC device has different offset and gain parameters which are + * computed to calibrate the device. + */ +struct vadc_linear_graph { + s32 dy; + s32 dx; + s32 gnd; +}; + +/** + * struct vadc_prescale_ratio - Represent scaling ratio for ADC input. + * @num: the inverse numerator of the gain applied to the input channel. + * @den: the inverse denominator of the gain applied to the input channel. + */ +struct vadc_prescale_ratio { + u32 num; + u32 den; +}; + +/** + * enum vadc_scale_fn_type - Scaling function to convert ADC code to + * physical scaled units for the channel. + * SCALE_DEFAULT: Default scaling to convert raw adc code to voltage (uV). + * SCALE_THERM_100K_PULLUP: Returns temperature in millidegC. + * Uses a mapping table with 100K pullup. + * SCALE_PMIC_THERM: Returns result in milli degree's Centigrade. + * SCALE_XOTHERM: Returns XO thermistor voltage in millidegC. + * SCALE_PMI_CHG_TEMP: Conversion for PMI CHG temp + * SCALE_HW_CALIB_DEFAULT: Default scaling to convert raw adc code to + * voltage (uV) with hardware applied offset/slope values to adc code. + * SCALE_HW_CALIB_THERM_100K_PULLUP: Returns temperature in millidegC using + * lookup table. The hardware applies offset/slope to adc code. + * SCALE_HW_CALIB_XOTHERM: Returns XO thermistor voltage in millidegC using + * 100k pullup. The hardware applies offset/slope to adc code. + * SCALE_HW_CALIB_THERM_100K_PU_PM7: Returns temperature in millidegC using + * lookup table for PMIC7. The hardware applies offset/slope to adc code. + * SCALE_HW_CALIB_PMIC_THERM: Returns result in milli degree's Centigrade. + * The hardware applies offset/slope to adc code. + * SCALE_HW_CALIB_PMIC_THERM: Returns result in milli degree's Centigrade. + * The hardware applies offset/slope to adc code. This is for PMIC7. + * SCALE_HW_CALIB_PM5_CHG_TEMP: Returns result in millidegrees for PMIC5 + * charger temperature. + * SCALE_HW_CALIB_PM5_SMB_TEMP: Returns result in millidegrees for PMIC5 + * SMB1390 temperature. + */ +enum vadc_scale_fn_type { + SCALE_DEFAULT = 0, + SCALE_THERM_100K_PULLUP, + SCALE_PMIC_THERM, + SCALE_XOTHERM, + SCALE_PMI_CHG_TEMP, + SCALE_HW_CALIB_DEFAULT, + SCALE_HW_CALIB_THERM_100K_PULLUP, + SCALE_HW_CALIB_XOTHERM, + SCALE_HW_CALIB_THERM_100K_PU_PM7, + SCALE_HW_CALIB_PMIC_THERM, + SCALE_HW_CALIB_PMIC_THERM_PM7, + SCALE_HW_CALIB_PM5_CHG_TEMP, + SCALE_HW_CALIB_PM5_SMB_TEMP, + SCALE_HW_CALIB_INVALID, +}; + +struct adc5_data { + const u32 full_scale_code_volt; + const u32 full_scale_code_cur; + const struct adc5_channels *adc_chans; + const struct iio_info *info; + unsigned int *decimation; + unsigned int *hw_settle_1; + unsigned int *hw_settle_2; +}; + +int qcom_vadc_scale(enum vadc_scale_fn_type scaletype, + const struct vadc_linear_graph *calib_graph, + const struct vadc_prescale_ratio *prescale, + bool absolute, + u16 adc_code, int *result_mdec); + +struct qcom_adc5_scale_type { + int (*scale_fn)(const struct vadc_prescale_ratio *prescale, + const struct adc5_data *data, u16 adc_code, int *result); +}; + +int qcom_adc5_hw_scale(enum vadc_scale_fn_type scaletype, + unsigned int prescale_ratio, + const struct adc5_data *data, + u16 adc_code, int *result_mdec); + +int qcom_adc5_prescaling_from_dt(u32 num, u32 den); + +int qcom_adc5_hw_settle_time_from_dt(u32 value, const unsigned int *hw_settle); + +int qcom_adc5_avg_samples_from_dt(u32 value); + +int qcom_adc5_decimation_from_dt(u32 value, const unsigned int *decimation); + +int qcom_vadc_decimation_from_dt(u32 value); + +#endif /* QCOM_VADC_COMMON_H */ |