diff options
Diffstat (limited to 'include/net/mac80211.h')
| -rw-r--r-- | include/net/mac80211.h | 44 |
1 files changed, 28 insertions, 16 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index d49928ba5d09..520eb4c5e5a2 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -852,6 +852,21 @@ struct ieee80211_channel_switch { }; /** + * enum ieee80211_vif_flags - virtual interface flags + * + * @IEEE80211_VIF_BEACON_FILTER: the device performs beacon filtering + * on this virtual interface to avoid unnecessary CPU wakeups + * @IEEE80211_VIF_SUPPORTS_CQM_RSSI: the device can do connection quality + * monitoring on this virtual interface -- i.e. it can monitor + * connection quality related parameters, such as the RSSI level and + * provide notifications if configured trigger levels are reached. + */ +enum ieee80211_vif_flags { + IEEE80211_VIF_BEACON_FILTER = BIT(0), + IEEE80211_VIF_SUPPORTS_CQM_RSSI = BIT(1), +}; + +/** * struct ieee80211_vif - per-interface data * * Data in this structure is continually present for driver @@ -863,6 +878,10 @@ struct ieee80211_channel_switch { * @addr: address of this interface * @p2p: indicates whether this AP or STA interface is a p2p * interface, i.e. a GO or p2p-sta respectively + * @driver_flags: flags/capabilities the driver has for this interface, + * these need to be set (or cleared) when the interface is added + * or, if supported by the driver, the interface type is changed + * at runtime, mac80211 will never touch this field * @drv_priv: data area for driver use, will always be aligned to * sizeof(void *). */ @@ -871,6 +890,7 @@ struct ieee80211_vif { struct ieee80211_bss_conf bss_conf; u8 addr[ETH_ALEN]; bool p2p; + u32 driver_flags; /* must be last */ u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *)))); }; @@ -1079,10 +1099,6 @@ enum sta_notify_cmd { * @IEEE80211_HW_MFP_CAPABLE: * Hardware supports management frame protection (MFP, IEEE 802.11w). * - * @IEEE80211_HW_BEACON_FILTER: - * Hardware supports dropping of irrelevant beacon frames to - * avoid waking up cpu. - * * @IEEE80211_HW_SUPPORTS_STATIC_SMPS: * Hardware supports static spatial multiplexing powersave, * ie. can turn off all but one chain even on HT connections @@ -1108,11 +1124,6 @@ enum sta_notify_cmd { * When this flag is set, signaling beacon-loss will cause an immediate * change to disassociated state. * - * @IEEE80211_HW_SUPPORTS_CQM_RSSI: - * Hardware can do connection quality monitoring - i.e. it can monitor - * connection quality related parameters, such as the RSSI level and - * provide notifications if configured trigger levels are reached. - * * @IEEE80211_HW_NEED_DTIM_PERIOD: * This device needs to know the DTIM period for the BSS before * associating. @@ -1150,13 +1161,13 @@ enum ieee80211_hw_flags { IEEE80211_HW_PS_NULLFUNC_STACK = 1<<11, IEEE80211_HW_SUPPORTS_DYNAMIC_PS = 1<<12, IEEE80211_HW_MFP_CAPABLE = 1<<13, - IEEE80211_HW_BEACON_FILTER = 1<<14, + /* reuse bit 14 */ IEEE80211_HW_SUPPORTS_STATIC_SMPS = 1<<15, IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS = 1<<16, IEEE80211_HW_SUPPORTS_UAPSD = 1<<17, IEEE80211_HW_REPORTS_TX_ACK_STATUS = 1<<18, IEEE80211_HW_CONNECTION_MONITOR = 1<<19, - IEEE80211_HW_SUPPORTS_CQM_RSSI = 1<<20, + /* reuse bit 20 */ IEEE80211_HW_SUPPORTS_PER_STA_GTK = 1<<21, IEEE80211_HW_AP_LINK_PS = 1<<22, IEEE80211_HW_TX_AMPDU_SETUP_IN_HW = 1<<23, @@ -1446,8 +1457,8 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb); * way the host will only receive beacons where some relevant information * (for example ERP protection or WMM settings) have changed. * - * Beacon filter support is advertised with the %IEEE80211_HW_BEACON_FILTER - * hardware capability. The driver needs to enable beacon filter support + * Beacon filter support is advertised with the %IEEE80211_VIF_BEACON_FILTER + * interface capability. The driver needs to enable beacon filter support * whenever power save is enabled, that is %IEEE80211_CONF_PS is set. When * power save is enabled, the stack will not check for beacon loss and the * driver needs to notify about loss of beacons with ieee80211_beacon_loss(). @@ -3316,7 +3327,7 @@ struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw, * * @vif: &struct ieee80211_vif pointer from the add_interface callback. * - * When beacon filtering is enabled with %IEEE80211_HW_BEACON_FILTER and + * When beacon filtering is enabled with %IEEE80211_VIF_BEACON_FILTER and * %IEEE80211_CONF_PS is set, the driver needs to inform whenever the * hardware is not receiving beacons with this function. */ @@ -3327,7 +3338,7 @@ void ieee80211_beacon_loss(struct ieee80211_vif *vif); * * @vif: &struct ieee80211_vif pointer from the add_interface callback. * - * When beacon filtering is enabled with %IEEE80211_HW_BEACON_FILTER, and + * When beacon filtering is enabled with %IEEE80211_VIF_BEACON_FILTER, and * %IEEE80211_CONF_PS and %IEEE80211_HW_CONNECTION_MONITOR are set, the driver * needs to inform if the connection to the AP has been lost. * @@ -3397,7 +3408,7 @@ void ieee80211_enable_dyn_ps(struct ieee80211_vif *vif); * @rssi_event: the RSSI trigger event type * @gfp: context flags * - * When the %IEEE80211_HW_SUPPORTS_CQM_RSSI is set, and a connection quality + * When the %IEEE80211_VIF_SUPPORTS_CQM_RSSI is set, and a connection quality * monitoring is configured with an rssi threshold, the driver will inform * whenever the rssi level reaches the threshold. */ @@ -3540,6 +3551,7 @@ struct ieee80211_tx_rate_control { bool rts, short_preamble; u8 max_rate_idx; u32 rate_idx_mask; + u8 rate_idx_mcs_mask[IEEE80211_HT_MCS_MASK_LEN]; bool bss; }; |