diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/mfd/mc13783.h | 2 | ||||
| -rw-r--r-- | include/linux/regulator/consumer.h | 4 | ||||
| -rw-r--r-- | include/linux/regulator/driver.h | 6 | ||||
| -rw-r--r-- | include/linux/regulator/fixed.h | 2 | ||||
| -rw-r--r-- | include/linux/regulator/max8649.h | 44 |
5 files changed, 57 insertions, 1 deletions
diff --git a/include/linux/mfd/mc13783.h b/include/linux/mfd/mc13783.h index 35680409b8cf..94cb51a64037 100644 --- a/include/linux/mfd/mc13783.h +++ b/include/linux/mfd/mc13783.h @@ -108,6 +108,8 @@ int mc13783_adc_do_conversion(struct mc13783 *mc13783, unsigned int mode, #define MC13783_REGU_V2 28 #define MC13783_REGU_V3 29 #define MC13783_REGU_V4 30 +#define MC13783_REGU_PWGT1SPI 31 +#define MC13783_REGU_PWGT2SPI 32 #define MC13783_IRQ_ADCDONE 0 #define MC13783_IRQ_ADCBISDONE 1 diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 030d92255c7a..28c9fd020d39 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -89,8 +89,9 @@ * REGULATION_OUT Regulator output is out of regulation. * FAIL Regulator output has failed. * OVER_TEMP Regulator over temp. - * FORCE_DISABLE Regulator shut down by software. + * FORCE_DISABLE Regulator forcibly shut down by software. * VOLTAGE_CHANGE Regulator voltage changed. + * DISABLE Regulator was disabled. * * NOTE: These events can be OR'ed together when passed into handler. */ @@ -102,6 +103,7 @@ #define REGULATOR_EVENT_OVER_TEMP 0x10 #define REGULATOR_EVENT_FORCE_DISABLE 0x20 #define REGULATOR_EVENT_VOLTAGE_CHANGE 0x40 +#define REGULATOR_EVENT_DISABLE 0x80 struct regulator; diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 31f2055eae28..592cd7c642c2 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -58,6 +58,9 @@ enum regulator_status { * @get_optimum_mode: Get the most efficient operating mode for the regulator * when running with the specified parameters. * + * @enable_time: Time taken for the regulator voltage output voltage to + * stabalise after being enabled, in microseconds. + * * @set_suspend_voltage: Set the voltage for the regulator when the system * is suspended. * @set_suspend_enable: Mark the regulator as enabled when the system is @@ -93,6 +96,9 @@ struct regulator_ops { int (*set_mode) (struct regulator_dev *, unsigned int mode); unsigned int (*get_mode) (struct regulator_dev *); + /* Time taken to enable the regulator */ + int (*enable_time) (struct regulator_dev *); + /* report regulator status ... most other accessors report * control inputs, this reports results of combining inputs * from Linux (and other sources) with the actual load. diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h index e94a4a1c7c8a..ffd7d508e726 100644 --- a/include/linux/regulator/fixed.h +++ b/include/linux/regulator/fixed.h @@ -25,6 +25,7 @@ struct regulator_init_data; * @microvolts: Output voltage of regulator * @gpio: GPIO to use for enable control * set to -EINVAL if not used + * @startup_delay: Start-up time in microseconds * @enable_high: Polarity of enable GPIO * 1 = Active high, 0 = Active low * @enabled_at_boot: Whether regulator has been enabled at @@ -41,6 +42,7 @@ struct fixed_voltage_config { const char *supply_name; int microvolts; int gpio; + unsigned startup_delay; unsigned enable_high:1; unsigned enabled_at_boot:1; struct regulator_init_data *init_data; diff --git a/include/linux/regulator/max8649.h b/include/linux/regulator/max8649.h new file mode 100644 index 000000000000..417d14ecd5cb --- /dev/null +++ b/include/linux/regulator/max8649.h @@ -0,0 +1,44 @@ +/* + * Interface of Maxim max8649 + * + * Copyright (C) 2009-2010 Marvell International Ltd. + * Haojian Zhuang <haojian.zhuang@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_REGULATOR_MAX8649_H +#define __LINUX_REGULATOR_MAX8649_H + +#include <linux/regulator/machine.h> + +enum { + MAX8649_EXTCLK_26MHZ = 0, + MAX8649_EXTCLK_13MHZ, + MAX8649_EXTCLK_19MHZ, /* 19.2MHz */ +}; + +enum { + MAX8649_RAMP_32MV = 0, + MAX8649_RAMP_16MV, + MAX8649_RAMP_8MV, + MAX8649_RAMP_4MV, + MAX8649_RAMP_2MV, + MAX8649_RAMP_1MV, + MAX8649_RAMP_0_5MV, + MAX8649_RAMP_0_25MV, +}; + +struct max8649_platform_data { + struct regulator_init_data *regulator; + + unsigned mode:2; /* bit[1:0] = VID1,VID0 */ + unsigned extclk_freq:2; + unsigned extclk:1; + unsigned ramp_timing:3; + unsigned ramp_down:1; +}; + +#endif /* __LINUX_REGULATOR_MAX8649_H */ |