summaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/linux/ieee80211.h40
-rw-r--r--include/linux/mmc/sdio_ids.h1
-rw-r--r--include/linux/wl12xx.h24
-rw-r--r--include/net/cfg80211.h47
-rw-r--r--include/net/mac80211.h49
-rw-r--r--include/net/nfc/digital.h7
-rw-r--r--include/net/nfc/nfc.h3
-rw-r--r--include/net/regulatory.h21
-rw-r--r--include/uapi/linux/nfc.h9
-rw-r--r--include/uapi/linux/nl80211.h48
10 files changed, 144 insertions, 105 deletions
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 5f349355ee54..f194ccb8539c 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -154,6 +154,10 @@ static inline u16 ieee80211_sn_sub(u16 sn1, u16 sn2)
802.11e clarifies the figure in section 7.1.2. The frame body is
up to 2304 octets long (maximum MSDU size) plus any crypt overhead. */
#define IEEE80211_MAX_DATA_LEN 2304
+/* 802.11ad extends maximum MSDU size for DMG (freq > 40Ghz) networks
+ * to 7920 bytes, see 8.2.3 General frame format
+ */
+#define IEEE80211_MAX_DATA_LEN_DMG 7920
/* 30 byte 4 addr hdr, 2 byte QoS, 2304 byte MSDU, 12 byte crypt, 4 byte FCS */
#define IEEE80211_MAX_FRAME_LEN 2352
@@ -2308,42 +2312,6 @@ static inline bool ieee80211_is_public_action(struct ieee80211_hdr *hdr,
}
/**
- * ieee80211_dsss_chan_to_freq - get channel center frequency
- * @channel: the DSSS channel
- *
- * Convert IEEE802.11 DSSS channel to the center frequency (MHz).
- * Ref IEEE 802.11-2007 section 15.6
- */
-static inline int ieee80211_dsss_chan_to_freq(int channel)
-{
- if ((channel > 0) && (channel < 14))
- return 2407 + (channel * 5);
- else if (channel == 14)
- return 2484;
- else
- return -1;
-}
-
-/**
- * ieee80211_freq_to_dsss_chan - get channel
- * @freq: the frequency
- *
- * Convert frequency (MHz) to IEEE802.11 DSSS channel
- * Ref IEEE 802.11-2007 section 15.6
- *
- * This routine selects the channel with the closest center frequency.
- */
-static inline int ieee80211_freq_to_dsss_chan(int freq)
-{
- if ((freq >= 2410) && (freq < 2475))
- return (freq - 2405) / 5;
- else if ((freq >= 2482) && (freq < 2487))
- return 14;
- else
- return -1;
-}
-
-/**
* ieee80211_tu_to_usec - convert time units (TU) to microseconds
* @tu: the TUs
*/
diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
index d8836623f36a..0f01fe065424 100644
--- a/include/linux/mmc/sdio_ids.h
+++ b/include/linux/mmc/sdio_ids.h
@@ -31,6 +31,7 @@
#define SDIO_DEVICE_ID_BROADCOM_4334 0x4334
#define SDIO_DEVICE_ID_BROADCOM_4335_4339 0x4335
#define SDIO_DEVICE_ID_BROADCOM_43362 43362
+#define SDIO_DEVICE_ID_BROADCOM_4354 0x4354
#define SDIO_VENDOR_ID_INTEL 0x0089
#define SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX 0x1402
diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h
index a54fe82e704b..a9c723be1acf 100644
--- a/include/linux/wl12xx.h
+++ b/include/linux/wl12xx.h
@@ -48,11 +48,15 @@ enum {
WL12XX_TCXOCLOCK_33_6 = 7, /* 33.6 MHz */
};
-struct wl12xx_platform_data {
- void (*set_power)(bool enable);
+struct wl1251_platform_data {
+ int power_gpio;
/* SDIO only: IRQ number if WLAN_IRQ line is used, 0 for SDIO IRQs */
int irq;
bool use_eeprom;
+};
+
+struct wl12xx_platform_data {
+ int irq;
int board_ref_clock;
int board_tcxo_clock;
unsigned long platform_quirks;
@@ -68,6 +72,10 @@ int wl12xx_set_platform_data(const struct wl12xx_platform_data *data);
struct wl12xx_platform_data *wl12xx_get_platform_data(void);
+int wl1251_set_platform_data(const struct wl1251_platform_data *data);
+
+struct wl1251_platform_data *wl1251_get_platform_data(void);
+
#else
static inline
@@ -82,6 +90,18 @@ struct wl12xx_platform_data *wl12xx_get_platform_data(void)
return ERR_PTR(-ENODATA);
}
+static inline
+int wl1251_set_platform_data(const struct wl1251_platform_data *data)
+{
+ return -ENOSYS;
+}
+
+static inline
+struct wl1251_platform_data *wl1251_get_platform_data(void)
+{
+ return ERR_PTR(-ENODATA);
+}
+
#endif
#endif
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 9f90554e88c4..f3539a15c411 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -151,6 +151,7 @@ enum ieee80211_channel_flags {
* @dfs_state: current state of this channel. Only relevant if radar is required
* on this channel.
* @dfs_state_entered: timestamp (jiffies) when the dfs state was entered.
+ * @dfs_cac_ms: DFS CAC time in milliseconds, this is valid for DFS channels.
*/
struct ieee80211_channel {
enum ieee80211_band band;
@@ -165,6 +166,7 @@ struct ieee80211_channel {
int orig_mag, orig_mpwr;
enum nl80211_dfs_state dfs_state;
unsigned long dfs_state_entered;
+ unsigned int dfs_cac_ms;
};
/**
@@ -2206,7 +2208,12 @@ struct cfg80211_qos_map {
* @set_cqm_txe_config: Configure connection quality monitor TX error
* thresholds.
* @sched_scan_start: Tell the driver to start a scheduled scan.
- * @sched_scan_stop: Tell the driver to stop an ongoing scheduled scan.
+ * @sched_scan_stop: Tell the driver to stop an ongoing scheduled scan. This
+ * call must stop the scheduled scan and be ready for starting a new one
+ * before it returns, i.e. @sched_scan_start may be called immediately
+ * after that again and should not fail in that case. The driver should
+ * not call cfg80211_sched_scan_stopped() for a requested stop (when this
+ * method returns 0.)
*
* @mgmt_frame_register: Notify driver that a management frame type was
* registered. Note that this callback may not sleep, and cannot run
@@ -2465,7 +2472,8 @@ struct cfg80211_ops {
int (*tdls_mgmt)(struct wiphy *wiphy, struct net_device *dev,
u8 *peer, u8 action_code, u8 dialog_token,
- u16 status_code, const u8 *buf, size_t len);
+ u16 status_code, u32 peer_capability,
+ const u8 *buf, size_t len);
int (*tdls_oper)(struct wiphy *wiphy, struct net_device *dev,
u8 *peer, enum nl80211_tdls_operation oper);
@@ -2497,7 +2505,8 @@ struct cfg80211_ops {
int (*start_radar_detection)(struct wiphy *wiphy,
struct net_device *dev,
- struct cfg80211_chan_def *chandef);
+ struct cfg80211_chan_def *chandef,
+ u32 cac_time_ms);
int (*update_ft_ies)(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_update_ft_ies_params *ftie);
int (*crit_proto_start)(struct wiphy *wiphy,
@@ -2610,9 +2619,12 @@ struct ieee80211_iface_limit {
* only in special cases.
* @radar_detect_widths: bitmap of channel widths supported for radar detection
*
- * These examples can be expressed as follows:
+ * With this structure the driver can describe which interface
+ * combinations it supports concurrently.
*
- * Allow #STA <= 1, #AP <= 1, matching BI, channels = 1, 2 total:
+ * Examples:
+ *
+ * 1. Allow #STA <= 1, #AP <= 1, matching BI, channels = 1, 2 total:
*
* struct ieee80211_iface_limit limits1[] = {
* { .max = 1, .types = BIT(NL80211_IFTYPE_STATION), },
@@ -2626,7 +2638,7 @@ struct ieee80211_iface_limit {
* };
*
*
- * Allow #{AP, P2P-GO} <= 8, channels = 1, 8 total:
+ * 2. Allow #{AP, P2P-GO} <= 8, channels = 1, 8 total:
*
* struct ieee80211_iface_limit limits2[] = {
* { .max = 8, .types = BIT(NL80211_IFTYPE_AP) |
@@ -2640,7 +2652,8 @@ struct ieee80211_iface_limit {
* };
*
*
- * Allow #STA <= 1, #{P2P-client,P2P-GO} <= 3 on two channels, 4 total.
+ * 3. Allow #STA <= 1, #{P2P-client,P2P-GO} <= 3 on two channels, 4 total.
+ *
* This allows for an infrastructure connection and three P2P connections.
*
* struct ieee80211_iface_limit limits3[] = {
@@ -2790,7 +2803,7 @@ struct wiphy_vendor_command {
* @perm_addr: permanent MAC address of this device
* @addr_mask: If the device supports multiple MAC addresses by masking,
* set this to a mask with variable bits set to 1, e.g. if the last
- * four bits are variable then set it to 00:...:00:0f. The actual
+ * four bits are variable then set it to 00-00-00-00-00-0f. The actual
* variable bits shall be determined by the interfaces added, with
* interfaces not matching the mask being rejected to be brought up.
* @n_addresses: number of addresses in @addresses.
@@ -3170,6 +3183,7 @@ struct cfg80211_cached_keys;
* @p2p_started: true if this is a P2P Device that has been started
* @cac_started: true if DFS channel availability check has been started
* @cac_start_time: timestamp (jiffies) when the dfs state was entered.
+ * @cac_time_ms: CAC time in ms
* @ps: powersave mode is enabled
* @ps_timeout: dynamic powersave timeout
* @ap_unexpected_nlportid: (private) netlink port ID of application
@@ -3225,6 +3239,7 @@ struct wireless_dev {
bool cac_started;
unsigned long cac_start_time;
+ unsigned int cac_time_ms;
#ifdef CONFIG_CFG80211_WEXT
/* wext data */
@@ -3657,7 +3672,7 @@ void cfg80211_sched_scan_stopped(struct wiphy *wiphy);
* cfg80211_inform_bss_width_frame - inform cfg80211 of a received BSS frame
*
* @wiphy: the wiphy reporting the BSS
- * @channel: The channel the frame was received on
+ * @rx_channel: The channel the frame was received on
* @scan_width: width of the control channel
* @mgmt: the management frame (probe response or beacon)
* @len: length of the management frame
@@ -3672,18 +3687,18 @@ void cfg80211_sched_scan_stopped(struct wiphy *wiphy);
*/
struct cfg80211_bss * __must_check
cfg80211_inform_bss_width_frame(struct wiphy *wiphy,
- struct ieee80211_channel *channel,
+ struct ieee80211_channel *rx_channel,
enum nl80211_bss_scan_width scan_width,
struct ieee80211_mgmt *mgmt, size_t len,
s32 signal, gfp_t gfp);
static inline struct cfg80211_bss * __must_check
cfg80211_inform_bss_frame(struct wiphy *wiphy,
- struct ieee80211_channel *channel,
+ struct ieee80211_channel *rx_channel,
struct ieee80211_mgmt *mgmt, size_t len,
s32 signal, gfp_t gfp)
{
- return cfg80211_inform_bss_width_frame(wiphy, channel,
+ return cfg80211_inform_bss_width_frame(wiphy, rx_channel,
NL80211_BSS_CHAN_WIDTH_20,
mgmt, len, signal, gfp);
}
@@ -3692,7 +3707,7 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy,
* cfg80211_inform_bss - inform cfg80211 of a new BSS
*
* @wiphy: the wiphy reporting the BSS
- * @channel: The channel the frame was received on
+ * @rx_channel: The channel the frame was received on
* @scan_width: width of the control channel
* @bssid: the BSSID of the BSS
* @tsf: the TSF sent by the peer in the beacon/probe response (or 0)
@@ -3711,7 +3726,7 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy,
*/
struct cfg80211_bss * __must_check
cfg80211_inform_bss_width(struct wiphy *wiphy,
- struct ieee80211_channel *channel,
+ struct ieee80211_channel *rx_channel,
enum nl80211_bss_scan_width scan_width,
const u8 *bssid, u64 tsf, u16 capability,
u16 beacon_interval, const u8 *ie, size_t ielen,
@@ -3719,12 +3734,12 @@ cfg80211_inform_bss_width(struct wiphy *wiphy,
static inline struct cfg80211_bss * __must_check
cfg80211_inform_bss(struct wiphy *wiphy,
- struct ieee80211_channel *channel,
+ struct ieee80211_channel *rx_channel,
const u8 *bssid, u64 tsf, u16 capability,
u16 beacon_interval, const u8 *ie, size_t ielen,
s32 signal, gfp_t gfp)
{
- return cfg80211_inform_bss_width(wiphy, channel,
+ return cfg80211_inform_bss_width(wiphy, rx_channel,
NL80211_BSS_CHAN_WIDTH_20,
bssid, tsf, capability,
beacon_interval, ie, ielen, signal,
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 4f0f29dce0aa..2de7ff42ff3a 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -66,10 +66,6 @@
*
* Secondly, when the hardware handles fragmentation, the frame handed to
* the driver from mac80211 is the MSDU, not the MPDU.
- *
- * Finally, for received frames, the driver is able to indicate that it has
- * filled a radiotap header and put that in front of the frame; if it does
- * not do so then mac80211 may add this under certain circumstances.
*/
/**
@@ -701,11 +697,11 @@ struct ieee80211_tx_info {
} control;
struct {
struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES];
- int ack_signal;
+ s32 ack_signal;
u8 ampdu_ack_len;
u8 ampdu_len;
u8 antenna;
- /* 21 bytes free */
+ void *status_driver_data[21 / sizeof(void *)];
} status;
struct {
struct ieee80211_tx_rate driver_rates[
@@ -881,11 +877,13 @@ enum mac80211_rx_flags {
* @RX_VHT_FLAG_80MHZ: 80 MHz was used
* @RX_VHT_FLAG_80P80MHZ: 80+80 MHz was used
* @RX_VHT_FLAG_160MHZ: 160 MHz was used
+ * @RX_VHT_FLAG_BF: packet was beamformed
*/
enum mac80211_rx_vht_flags {
RX_VHT_FLAG_80MHZ = BIT(0),
RX_VHT_FLAG_80P80MHZ = BIT(1),
RX_VHT_FLAG_160MHZ = BIT(2),
+ RX_VHT_FLAG_BF = BIT(3),
};
/**
@@ -1507,8 +1505,6 @@ struct ieee80211_tx_control {
* @IEEE80211_HW_CONNECTION_MONITOR:
* The hardware performs its own connection monitoring, including
* periodic keep-alives to the AP and probing the AP on beacon loss.
- * When this flag is set, signaling beacon-loss will cause an immediate
- * change to disassociated state.
*
* @IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC:
* This device needs to get data from beacon before association (i.e.
@@ -1644,10 +1640,6 @@ enum ieee80211_hw_flags {
* the hw can report back.
* @max_rate_tries: maximum number of tries for each stage
*
- * @napi_weight: weight used for NAPI polling. You must specify an
- * appropriate value here if a napi_poll operation is provided
- * by your driver.
- *
* @max_rx_aggregation_subframes: maximum buffer size (number of
* sub-frames) to be used for A-MPDU block ack receiver
* aggregation.
@@ -1701,7 +1693,6 @@ struct ieee80211_hw {
int vif_data_size;
int sta_data_size;
int chanctx_data_size;
- int napi_weight;
u16 queues;
u16 max_listen_interval;
s8 max_signal;
@@ -2471,6 +2462,7 @@ enum ieee80211_roc_type {
* This process will continue until sched_scan_stop is called.
*
* @sched_scan_stop: Tell the hardware to stop an ongoing scheduled scan.
+ * In this case, ieee80211_sched_scan_stopped() must not be called.
*
* @sw_scan_start: Notifier function that is called just before a software scan
* is started. Can be NULL, if the driver doesn't need this notification.
@@ -2624,8 +2616,6 @@ enum ieee80211_roc_type {
* callback. They must then call ieee80211_chswitch_done() to indicate
* completion of the channel switch.
*
- * @napi_poll: Poll Rx queue for incoming data frames.
- *
* @set_antenna: Set antenna configuration (tx_ant, rx_ant) on the device.
* Parameters are bitmaps of allowed antennas to use for TX/RX. Drivers may
* reject TX/RX mask combinations they cannot support by returning -EINVAL
@@ -2820,7 +2810,7 @@ struct ieee80211_ops {
struct ieee80211_vif *vif,
struct cfg80211_sched_scan_request *req,
struct ieee80211_sched_scan_ies *ies);
- void (*sched_scan_stop)(struct ieee80211_hw *hw,
+ int (*sched_scan_stop)(struct ieee80211_hw *hw,
struct ieee80211_vif *vif);
void (*sw_scan_start)(struct ieee80211_hw *hw);
void (*sw_scan_complete)(struct ieee80211_hw *hw);
@@ -2884,7 +2874,6 @@ struct ieee80211_ops {
void (*flush)(struct ieee80211_hw *hw, u32 queues, bool drop);
void (*channel_switch)(struct ieee80211_hw *hw,
struct ieee80211_channel_switch *ch_switch);
- int (*napi_poll)(struct ieee80211_hw *hw, int budget);
int (*set_antenna)(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant);
int (*get_antenna)(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant);
@@ -3166,21 +3155,21 @@ void ieee80211_free_hw(struct ieee80211_hw *hw);
*/
void ieee80211_restart_hw(struct ieee80211_hw *hw);
-/** ieee80211_napi_schedule - schedule NAPI poll
- *
- * Use this function to schedule NAPI polling on a device.
- *
- * @hw: the hardware to start polling
- */
-void ieee80211_napi_schedule(struct ieee80211_hw *hw);
-
-/** ieee80211_napi_complete - complete NAPI polling
- *
- * Use this function to finish NAPI polling on a device.
+/**
+ * ieee80211_napi_add - initialize mac80211 NAPI context
+ * @hw: the hardware to initialize the NAPI context on
+ * @napi: the NAPI context to initialize
+ * @napi_dev: dummy NAPI netdevice, here to not waste the space if the
+ * driver doesn't use NAPI
+ * @poll: poll function
+ * @weight: default weight
*
- * @hw: the hardware to stop polling
+ * See also netif_napi_add().
*/
-void ieee80211_napi_complete(struct ieee80211_hw *hw);
+void ieee80211_napi_add(struct ieee80211_hw *hw, struct napi_struct *napi,
+ struct net_device *napi_dev,
+ int (*poll)(struct napi_struct *, int),
+ int weight);
/**
* ieee80211_rx - receive frame
diff --git a/include/net/nfc/digital.h b/include/net/nfc/digital.h
index 81af21e9bcd4..7655cfe27c34 100644
--- a/include/net/nfc/digital.h
+++ b/include/net/nfc/digital.h
@@ -35,6 +35,7 @@ enum {
NFC_DIGITAL_RF_TECH_106A = 0,
NFC_DIGITAL_RF_TECH_212F,
NFC_DIGITAL_RF_TECH_424F,
+ NFC_DIGITAL_RF_TECH_ISO15693,
NFC_DIGITAL_RF_TECH_LAST,
};
@@ -50,6 +51,7 @@ enum {
NFC_DIGITAL_FRAMING_NFCA_T1T,
NFC_DIGITAL_FRAMING_NFCA_T2T,
+ NFC_DIGITAL_FRAMING_NFCA_T4T,
NFC_DIGITAL_FRAMING_NFCA_NFC_DEP,
NFC_DIGITAL_FRAMING_NFCF,
@@ -57,6 +59,9 @@ enum {
NFC_DIGITAL_FRAMING_NFCF_NFC_DEP,
NFC_DIGITAL_FRAMING_NFC_DEP_ACTIVATED,
+ NFC_DIGITAL_FRAMING_ISO15693_INVENTORY,
+ NFC_DIGITAL_FRAMING_ISO15693_T5T,
+
NFC_DIGITAL_FRAMING_LAST,
};
@@ -204,6 +209,8 @@ struct nfc_digital_dev {
u8 curr_rf_tech;
u8 curr_nfc_dep_pni;
+ u16 target_fsc;
+
int (*skb_check_crc)(struct sk_buff *skb);
void (*skb_add_crc)(struct sk_buff *skb);
};
diff --git a/include/net/nfc/nfc.h b/include/net/nfc/nfc.h
index e80894bca1d0..2e8b40c16274 100644
--- a/include/net/nfc/nfc.h
+++ b/include/net/nfc/nfc.h
@@ -111,6 +111,9 @@ struct nfc_target {
u8 sensf_res[NFC_SENSF_RES_MAXSIZE];
u8 hci_reader_gate;
u8 logical_idx;
+ u8 is_iso15693;
+ u8 iso15693_dsfid;
+ u8 iso15693_uid[NFC_ISO15693_UID_MAXSIZE];
};
/**
diff --git a/include/net/regulatory.h b/include/net/regulatory.h
index b07cdc9fa454..75fc1f5a948d 100644
--- a/include/net/regulatory.h
+++ b/include/net/regulatory.h
@@ -155,6 +155,7 @@ struct ieee80211_reg_rule {
struct ieee80211_freq_range freq_range;
struct ieee80211_power_rule power_rule;
u32 flags;
+ u32 dfs_cac_ms;
};
struct ieee80211_regdomain {
@@ -172,14 +173,18 @@ struct ieee80211_regdomain {
#define DBM_TO_MBM(gain) ((gain) * 100)
#define MBM_TO_DBM(gain) ((gain) / 100)
-#define REG_RULE(start, end, bw, gain, eirp, reg_flags) \
-{ \
- .freq_range.start_freq_khz = MHZ_TO_KHZ(start), \
- .freq_range.end_freq_khz = MHZ_TO_KHZ(end), \
- .freq_range.max_bandwidth_khz = MHZ_TO_KHZ(bw), \
- .power_rule.max_antenna_gain = DBI_TO_MBI(gain),\
- .power_rule.max_eirp = DBM_TO_MBM(eirp), \
- .flags = reg_flags, \
+#define REG_RULE_EXT(start, end, bw, gain, eirp, dfs_cac, reg_flags) \
+{ \
+ .freq_range.start_freq_khz = MHZ_TO_KHZ(start), \
+ .freq_range.end_freq_khz = MHZ_TO_KHZ(end), \
+ .freq_range.max_bandwidth_khz = MHZ_TO_KHZ(bw), \
+ .power_rule.max_antenna_gain = DBI_TO_MBI(gain), \
+ .power_rule.max_eirp = DBM_TO_MBM(eirp), \
+ .flags = reg_flags, \
+ .dfs_cac_ms = dfs_cac, \
}
+#define REG_RULE(start, end, bw, gain, eirp, reg_flags) \
+ REG_RULE_EXT(start, end, bw, gain, eirp, 0, reg_flags)
+
#endif
diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h
index 6ad6cc03ccd3..9789dc95b6a8 100644
--- a/include/uapi/linux/nfc.h
+++ b/include/uapi/linux/nfc.h
@@ -150,6 +150,8 @@ enum nfc_commands {
* @NFC_ATTR_SE_TYPE: Secure element type (UICC or EMBEDDED)
* @NFC_ATTR_FIRMWARE_DOWNLOAD_STATUS: Firmware download operation status
* @NFC_ATTR_APDU: Secure element APDU
+ * @NFC_ATTR_TARGET_ISO15693_DSFID: ISO 15693 Data Storage Format Identifier
+ * @NFC_ATTR_TARGET_ISO15693_UID: ISO 15693 Unique Identifier
*/
enum nfc_attrs {
NFC_ATTR_UNSPEC,
@@ -178,6 +180,8 @@ enum nfc_attrs {
NFC_ATTR_SE_AID,
NFC_ATTR_FIRMWARE_DOWNLOAD_STATUS,
NFC_ATTR_SE_APDU,
+ NFC_ATTR_TARGET_ISO15693_DSFID,
+ NFC_ATTR_TARGET_ISO15693_UID,
/* private: internal use only */
__NFC_ATTR_AFTER_LAST
};
@@ -200,6 +204,7 @@ enum nfc_sdp_attr {
#define NFC_SENSF_RES_MAXSIZE 18
#define NFC_GB_MAXSIZE 48
#define NFC_FIRMWARE_NAME_MAXSIZE 32
+#define NFC_ISO15693_UID_MAXSIZE 8
/* NFC protocols */
#define NFC_PROTO_JEWEL 1
@@ -208,8 +213,9 @@ enum nfc_sdp_attr {
#define NFC_PROTO_ISO14443 4
#define NFC_PROTO_NFC_DEP 5
#define NFC_PROTO_ISO14443_B 6
+#define NFC_PROTO_ISO15693 7
-#define NFC_PROTO_MAX 7
+#define NFC_PROTO_MAX 8
/* NFC communication modes */
#define NFC_COMM_ACTIVE 0
@@ -227,6 +233,7 @@ enum nfc_sdp_attr {
#define NFC_PROTO_ISO14443_MASK (1 << NFC_PROTO_ISO14443)
#define NFC_PROTO_NFC_DEP_MASK (1 << NFC_PROTO_NFC_DEP)
#define NFC_PROTO_ISO14443_B_MASK (1 << NFC_PROTO_ISO14443_B)
+#define NFC_PROTO_ISO15693_MASK (1 << NFC_PROTO_ISO15693)
/* NFC Secure Elements */
#define NFC_SE_UICC 0x1
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index a12e6cae5132..1ba9d626aa83 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -303,8 +303,9 @@
* passed, all channels allowed for the current regulatory domain
* are used. Extra IEs can also be passed from the userspace by
* using the %NL80211_ATTR_IE attribute.
- * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT
- * if scheduled scan is not running.
+ * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
+ * scheduled scan is not running. The caller may assume that as soon
+ * as the call returns, it is safe to start a new scheduled scan again.
* @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
* results available.
* @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has
@@ -1575,6 +1576,9 @@ enum nl80211_commands {
* advertise values that cannot always be met. In such cases, an attempt
* to add a new station entry with @NL80211_CMD_NEW_STATION may fail.
*
+ * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32.
+ * As specified in the &enum nl80211_tdls_peer_capability.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -1908,6 +1912,8 @@ enum nl80211_attrs {
NL80211_ATTR_MAX_AP_ASSOC_STA,
+ NL80211_ATTR_TDLS_PEER_CAPABILITY,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -2329,6 +2335,7 @@ enum nl80211_band_attr {
* @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel
* using this channel as the primary or any of the secondary channels
* isn't possible
+ * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
* @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
* currently defined
* @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -2347,6 +2354,7 @@ enum nl80211_frequency_attr {
NL80211_FREQUENCY_ATTR_NO_HT40_PLUS,
NL80211_FREQUENCY_ATTR_NO_80MHZ,
NL80211_FREQUENCY_ATTR_NO_160MHZ,
+ NL80211_FREQUENCY_ATTR_DFS_CAC_TIME,
/* keep last */
__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -2437,15 +2445,14 @@ enum nl80211_reg_type {
* in KHz. This is not a center a frequency but an actual regulatory
* band edge.
* @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
- * frequency range, in KHz. If not present or 0, maximum available
- * bandwidth should be calculated base on contiguous rules and wider
- * channels will be allowed to cross multiple contiguous/overlapping
- * frequency ranges.
+ * frequency range, in KHz.
* @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
* for a given frequency range. The value is in mBi (100 * dBi).
* If you don't have one then don't send this.
* @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
* a given frequency range. The value is in mBm (100 * dBm).
+ * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
+ * If not present or 0 default CAC time will be used.
* @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
* currently defined
* @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use
@@ -2461,6 +2468,8 @@ enum nl80211_reg_rule_attr {
NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
NL80211_ATTR_POWER_RULE_MAX_EIRP,
+ NL80211_ATTR_DFS_CAC_TIME,
+
/* keep last */
__NL80211_REG_RULE_ATTR_AFTER_LAST,
NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1
@@ -2511,6 +2520,9 @@ enum nl80211_sched_scan_match_attr {
* @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed,
* this includes probe requests or modes of operation that require
* beaconing.
+ * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
+ * base on contiguous rules and wider channels will be allowed to cross
+ * multiple contiguous/overlapping frequency ranges.
*/
enum nl80211_reg_rule_flags {
NL80211_RRF_NO_OFDM = 1<<0,
@@ -2522,6 +2534,7 @@ enum nl80211_reg_rule_flags {
NL80211_RRF_PTMP_ONLY = 1<<6,
NL80211_RRF_NO_IR = 1<<7,
__NL80211_RRF_NO_IBSS = 1<<8,
+ NL80211_RRF_AUTO_BW = 1<<11,
};
#define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR
@@ -3843,11 +3856,6 @@ enum nl80211_ap_sme_features {
* @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested
* to work properly to suppport receiving regulatory hints from
* cellular base stations.
- * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active
- * P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel
- * in the interface combinations, even when it's only used for scan
- * and remain-on-channel. This could be due to, for example, the
- * remain-on-channel implementation requiring a channel context.
* @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of
* equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station
* mode
@@ -3889,7 +3897,7 @@ enum nl80211_feature_flags {
NL80211_FEATURE_HT_IBSS = 1 << 1,
NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2,
NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3,
- NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4,
+ /* bit 4 is reserved - don't use */
NL80211_FEATURE_SAE = 1 << 5,
NL80211_FEATURE_LOW_PRIORITY_SCAN = 1 << 6,
NL80211_FEATURE_SCAN_FLUSH = 1 << 7,
@@ -4079,4 +4087,20 @@ struct nl80211_vendor_cmd_info {
__u32 subcmd;
};
+/**
+ * enum nl80211_tdls_peer_capability - TDLS peer flags.
+ *
+ * Used by tdls_mgmt() to determine which conditional elements need
+ * to be added to TDLS Setup frames.
+ *
+ * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable.
+ * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable.
+ * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable.
+ */
+enum nl80211_tdls_peer_capability {
+ NL80211_TDLS_PEER_HT = 1<<0,
+ NL80211_TDLS_PEER_VHT = 1<<1,
+ NL80211_TDLS_PEER_WMM = 1<<2,
+};
+
#endif /* __LINUX_NL80211_H */
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-26 15:30:35 +0000