1 files changed, 60 insertions, 60 deletions

diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index e3bbdd537b90..20fe5ef6abc5 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -617,7 +617,7 @@ static void hci_init2_req(struct hci_request *req, unsigned long opt)
 		 */
 		hdev->max_page = 0x01;
 
-		if (test_bit(HCI_SSP_ENABLED, &hdev->dev_flags)) {
+		if (hci_dev_test_flag(hdev, HCI_SSP_ENABLED)) {
 			u8 mode = 0x01;
 
 			hci_req_add(req, HCI_OP_WRITE_SSP_MODE,
@@ -656,7 +656,7 @@ static void hci_init2_req(struct hci_request *req, unsigned long opt)
 			    sizeof(cp), &cp);
 	}
 
-	if (test_bit(HCI_LINK_SECURITY, &hdev->dev_flags)) {
+	if (hci_dev_test_flag(hdev, HCI_LINK_SECURITY)) {
 		u8 enable = 1;
 		hci_req_add(req, HCI_OP_WRITE_AUTH_ENABLE, sizeof(enable),
 			    &enable);
@@ -693,7 +693,7 @@ static void hci_set_le_support(struct hci_request *req)
 
 	memset(&cp, 0, sizeof(cp));
 
-	if (test_bit(HCI_LE_ENABLED, &hdev->dev_flags)) {
+	if (hci_dev_test_flag(hdev, HCI_LE_ENABLED)) {
 		cp.le = 0x01;
 		cp.simul = 0x00;
 	}
@@ -881,7 +881,7 @@ static void hci_init4_req(struct hci_request *req, unsigned long opt)
 		hci_req_add(req, HCI_OP_READ_SYNC_TRAIN_PARAMS, 0, NULL);
 
 	/* Enable Secure Connections if supported and configured */
-	if (test_bit(HCI_SSP_ENABLED, &hdev->dev_flags) &&
+	if (hci_dev_test_flag(hdev, HCI_SSP_ENABLED) &&
 	    bredr_sc_enabled(hdev)) {
 		u8 support = 0x01;
 
@@ -901,7 +901,7 @@ static int __hci_init(struct hci_dev *hdev)
 	/* The Device Under Test (DUT) mode is special and available for
 	 * all controller types. So just create it early on.
 	 */
-	if (test_bit(HCI_SETUP, &hdev->dev_flags)) {
+	if (hci_dev_test_flag(hdev, HCI_SETUP)) {
 		debugfs_create_file("dut_mode", 0644, hdev->debugfs, hdev,
 				    &dut_mode_fops);
 	}
@@ -937,8 +937,8 @@ static int __hci_init(struct hci_dev *hdev)
 	 * So only when in setup phase or config phase, create the debugfs
 	 * entries and register the SMP channels.
 	 */
-	if (!test_bit(HCI_SETUP, &hdev->dev_flags) &&
-	    !test_bit(HCI_CONFIG, &hdev->dev_flags))
+	if (!hci_dev_test_flag(hdev, HCI_SETUP) &&
+	    !hci_dev_test_flag(hdev, HCI_CONFIG))
 		return 0;
 
 	hci_debugfs_create_common(hdev);
@@ -1300,12 +1300,12 @@ int hci_inquiry(void __user *arg)
 	if (!hdev)
 		return -ENODEV;
 
-	if (test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) {
+	if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) {
 		err = -EBUSY;
 		goto done;
 	}
 
-	if (test_bit(HCI_UNCONFIGURED, &hdev->dev_flags)) {
+	if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) {
 		err = -EOPNOTSUPP;
 		goto done;
 	}
@@ -1315,7 +1315,7 @@ int hci_inquiry(void __user *arg)
 		goto done;
 	}
 
-	if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) {
+	if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) {
 		err = -EOPNOTSUPP;
 		goto done;
 	}
@@ -1387,17 +1387,17 @@ static int hci_dev_do_open(struct hci_dev *hdev)
 
 	hci_req_lock(hdev);
 
-	if (test_bit(HCI_UNREGISTER, &hdev->dev_flags)) {
+	if (hci_dev_test_flag(hdev, HCI_UNREGISTER)) {
 		ret = -ENODEV;
 		goto done;
 	}
 
-	if (!test_bit(HCI_SETUP, &hdev->dev_flags) &&
-	    !test_bit(HCI_CONFIG, &hdev->dev_flags)) {
+	if (!hci_dev_test_flag(hdev, HCI_SETUP) &&
+	    !hci_dev_test_flag(hdev, HCI_CONFIG)) {
 		/* Check for rfkill but allow the HCI setup stage to
 		 * proceed (which in itself doesn't cause any RF activity).
 		 */
-		if (test_bit(HCI_RFKILLED, &hdev->dev_flags)) {
+		if (hci_dev_test_flag(hdev, HCI_RFKILLED)) {
 			ret = -ERFKILL;
 			goto done;
 		}
@@ -1414,7 +1414,7 @@ static int hci_dev_do_open(struct hci_dev *hdev)
 		 * This check is only valid for BR/EDR controllers
 		 * since AMP controllers do not have an address.
 		 */
-		if (!test_bit(HCI_USER_CHANNEL, &hdev->dev_flags) &&
+		if (!hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
 		    hdev->dev_type == HCI_BREDR &&
 		    !bacmp(&hdev->bdaddr, BDADDR_ANY) &&
 		    !bacmp(&hdev->static_addr, BDADDR_ANY)) {
@@ -1436,7 +1436,7 @@ static int hci_dev_do_open(struct hci_dev *hdev)
 	atomic_set(&hdev->cmd_cnt, 1);
 	set_bit(HCI_INIT, &hdev->flags);
 
-	if (test_bit(HCI_SETUP, &hdev->dev_flags)) {
+	if (hci_dev_test_flag(hdev, HCI_SETUP)) {
 		if (hdev->setup)
 			ret = hdev->setup(hdev);
 
@@ -1458,11 +1458,11 @@ static int hci_dev_do_open(struct hci_dev *hdev)
 		 * also the original Bluetooth public device address
 		 * will be read using the Read BD Address command.
 		 */
-		if (test_bit(HCI_UNCONFIGURED, &hdev->dev_flags))
+		if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED))
 			ret = __hci_unconf_init(hdev);
 	}
 
-	if (test_bit(HCI_CONFIG, &hdev->dev_flags)) {
+	if (hci_dev_test_flag(hdev, HCI_CONFIG)) {
 		/* If public address change is configured, ensure that
 		 * the address gets programmed. If the driver does not
 		 * support changing the public address, fail the power
@@ -1476,8 +1476,8 @@ static int hci_dev_do_open(struct hci_dev *hdev)
 	}
 
 	if (!ret) {
-		if (!test_bit(HCI_UNCONFIGURED, &hdev->dev_flags) &&
-		    !test_bit(HCI_USER_CHANNEL, &hdev->dev_flags))
+		if (!hci_dev_test_flag(hdev, HCI_UNCONFIGURED) &&
+		    !hci_dev_test_flag(hdev, HCI_USER_CHANNEL))
 			ret = __hci_init(hdev);
 	}
 
@@ -1488,10 +1488,10 @@ static int hci_dev_do_open(struct hci_dev *hdev)
 		set_bit(HCI_RPA_EXPIRED, &hdev->dev_flags);
 		set_bit(HCI_UP, &hdev->flags);
 		hci_notify(hdev, HCI_DEV_UP);
-		if (!test_bit(HCI_SETUP, &hdev->dev_flags) &&
-		    !test_bit(HCI_CONFIG, &hdev->dev_flags) &&
-		    !test_bit(HCI_UNCONFIGURED, &hdev->dev_flags) &&
-		    !test_bit(HCI_USER_CHANNEL, &hdev->dev_flags) &&
+		if (!hci_dev_test_flag(hdev, HCI_SETUP) &&
+		    !hci_dev_test_flag(hdev, HCI_CONFIG) &&
+		    !hci_dev_test_flag(hdev, HCI_UNCONFIGURED) &&
+		    !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
 		    hdev->dev_type == HCI_BREDR) {
 			hci_dev_lock(hdev);
 			mgmt_powered(hdev, 1);
@@ -1543,8 +1543,8 @@ int hci_dev_open(__u16 dev)
 	 * HCI_USER_CHANNEL will be set first before attempting to
 	 * open the device.
 	 */
-	if (test_bit(HCI_UNCONFIGURED, &hdev->dev_flags) &&
-	    !test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) {
+	if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED) &&
+	    !hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) {
 		err = -EOPNOTSUPP;
 		goto done;
 	}
@@ -1569,8 +1569,8 @@ int hci_dev_open(__u16 dev)
 	 * is in use this bit will be cleared again and userspace has
 	 * to explicitly enable it.
 	 */
-	if (!test_bit(HCI_USER_CHANNEL, &hdev->dev_flags) &&
-	    !test_bit(HCI_MGMT, &hdev->dev_flags))
+	if (!hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
+	    !hci_dev_test_flag(hdev, HCI_MGMT))
 		set_bit(HCI_BONDABLE, &hdev->dev_flags);
 
 	err = hci_dev_do_open(hdev);
@@ -1601,7 +1601,7 @@ static int hci_dev_do_close(struct hci_dev *hdev)
 {
 	BT_DBG("%s %p", hdev->name, hdev);
 
-	if (!test_bit(HCI_UNREGISTER, &hdev->dev_flags)) {
+	if (!hci_dev_test_flag(hdev, HCI_UNREGISTER)) {
 		/* Execute vendor specific shutdown routine */
 		if (hdev->shutdown)
 			hdev->shutdown(hdev);
@@ -1635,7 +1635,7 @@ static int hci_dev_do_close(struct hci_dev *hdev)
 	cancel_delayed_work_sync(&hdev->le_scan_disable);
 	cancel_delayed_work_sync(&hdev->le_scan_restart);
 
-	if (test_bit(HCI_MGMT, &hdev->dev_flags))
+	if (hci_dev_test_flag(hdev, HCI_MGMT))
 		cancel_delayed_work_sync(&hdev->rpa_expired);
 
 	/* Avoid potential lockdep warnings from the *_flush() calls by
@@ -1667,8 +1667,8 @@ static int hci_dev_do_close(struct hci_dev *hdev)
 	/* Reset device */
 	skb_queue_purge(&hdev->cmd_q);
 	atomic_set(&hdev->cmd_cnt, 1);
-	if (!test_bit(HCI_AUTO_OFF, &hdev->dev_flags) &&
-	    !test_bit(HCI_UNCONFIGURED, &hdev->dev_flags) &&
+	if (!hci_dev_test_flag(hdev, HCI_AUTO_OFF) &&
+	    !hci_dev_test_flag(hdev, HCI_UNCONFIGURED) &&
 	    test_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks)) {
 		set_bit(HCI_INIT, &hdev->flags);
 		__hci_req_sync(hdev, hci_reset_req, 0, HCI_CMD_TIMEOUT);
@@ -1723,7 +1723,7 @@ int hci_dev_close(__u16 dev)
 	if (!hdev)
 		return -ENODEV;
 
-	if (test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) {
+	if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) {
 		err = -EBUSY;
 		goto done;
 	}
@@ -1786,12 +1786,12 @@ int hci_dev_reset(__u16 dev)
 		goto done;
 	}
 
-	if (test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) {
+	if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) {
 		err = -EBUSY;
 		goto done;
 	}
 
-	if (test_bit(HCI_UNCONFIGURED, &hdev->dev_flags)) {
+	if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) {
 		err = -EOPNOTSUPP;
 		goto done;
 	}
@@ -1812,12 +1812,12 @@ int hci_dev_reset_stat(__u16 dev)
 	if (!hdev)
 		return -ENODEV;
 
-	if (test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) {
+	if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) {
 		ret = -EBUSY;
 		goto done;
 	}
 
-	if (test_bit(HCI_UNCONFIGURED, &hdev->dev_flags)) {
+	if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) {
 		ret = -EOPNOTSUPP;
 		goto done;
 	}
@@ -1851,14 +1851,14 @@ static void hci_update_scan_state(struct hci_dev *hdev, u8 scan)
 						    &hdev->dev_flags);
 	}
 
-	if (!test_bit(HCI_MGMT, &hdev->dev_flags))
+	if (!hci_dev_test_flag(hdev, HCI_MGMT))
 		return;
 
 	if (conn_changed || discov_changed) {
 		/* In case this was disabled through mgmt */
 		set_bit(HCI_BREDR_ENABLED, &hdev->dev_flags);
 
-		if (test_bit(HCI_LE_ENABLED, &hdev->dev_flags))
+		if (hci_dev_test_flag(hdev, HCI_LE_ENABLED))
 			mgmt_update_adv_data(hdev);
 
 		mgmt_new_settings(hdev);
@@ -1878,12 +1878,12 @@ int hci_dev_cmd(unsigned int cmd, void __user *arg)
 	if (!hdev)
 		return -ENODEV;
 
-	if (test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) {
+	if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) {
 		err = -EBUSY;
 		goto done;
 	}
 
-	if (test_bit(HCI_UNCONFIGURED, &hdev->dev_flags)) {
+	if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) {
 		err = -EOPNOTSUPP;
 		goto done;
 	}
@@ -1893,7 +1893,7 @@ int hci_dev_cmd(unsigned int cmd, void __user *arg)
 		goto done;
 	}
 
-	if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) {
+	if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) {
 		err = -EOPNOTSUPP;
 		goto done;
 	}
@@ -1997,7 +1997,7 @@ int hci_get_dev_list(void __user *arg)
 		 * is running, but in that case still indicate that the
 		 * device is actually down.
 		 */
-		if (test_bit(HCI_AUTO_OFF, &hdev->dev_flags))
+		if (hci_dev_test_flag(hdev, HCI_AUTO_OFF))
 			flags &= ~BIT(HCI_UP);
 
 		(dr + n)->dev_id  = hdev->id;
@@ -2035,7 +2035,7 @@ int hci_get_dev_info(void __user *arg)
 	 * is running, but in that case still indicate that the
 	 * device is actually down.
 	 */
-	if (test_bit(HCI_AUTO_OFF, &hdev->dev_flags))
+	if (hci_dev_test_flag(hdev, HCI_AUTO_OFF))
 		flags = hdev->flags & ~BIT(HCI_UP);
 	else
 		flags = hdev->flags;
@@ -2078,13 +2078,13 @@ static int hci_rfkill_set_block(void *data, bool blocked)
 
 	BT_DBG("%p name %s blocked %d", hdev, hdev->name, blocked);
 
-	if (test_bit(HCI_USER_CHANNEL, &hdev->dev_flags))
+	if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL))
 		return -EBUSY;
 
 	if (blocked) {
 		set_bit(HCI_RFKILLED, &hdev->dev_flags);
-		if (!test_bit(HCI_SETUP, &hdev->dev_flags) &&
-		    !test_bit(HCI_CONFIG, &hdev->dev_flags))
+		if (!hci_dev_test_flag(hdev, HCI_SETUP) &&
+		    !hci_dev_test_flag(hdev, HCI_CONFIG))
 			hci_dev_do_close(hdev);
 	} else {
 		clear_bit(HCI_RFKILLED, &hdev->dev_flags);
@@ -2116,14 +2116,14 @@ static void hci_power_on(struct work_struct *work)
 	 * ignored and they need to be checked now. If they are still
 	 * valid, it is important to turn the device back off.
 	 */
-	if (test_bit(HCI_RFKILLED, &hdev->dev_flags) ||
-	    test_bit(HCI_UNCONFIGURED, &hdev->dev_flags) ||
+	if (hci_dev_test_flag(hdev, HCI_RFKILLED) ||
+	    hci_dev_test_flag(hdev, HCI_UNCONFIGURED) ||
 	    (hdev->dev_type == HCI_BREDR &&
 	     !bacmp(&hdev->bdaddr, BDADDR_ANY) &&
 	     !bacmp(&hdev->static_addr, BDADDR_ANY))) {
 		clear_bit(HCI_AUTO_OFF, &hdev->dev_flags);
 		hci_dev_do_close(hdev);
-	} else if (test_bit(HCI_AUTO_OFF, &hdev->dev_flags)) {
+	} else if (hci_dev_test_flag(hdev, HCI_AUTO_OFF)) {
 		queue_delayed_work(hdev->req_workqueue, &hdev->power_off,
 				   HCI_AUTO_OFF_TIMEOUT);
 	}
@@ -2132,7 +2132,7 @@ static void hci_power_on(struct work_struct *work)
 		/* For unconfigured devices, set the HCI_RAW flag
 		 * so that userspace can easily identify them.
 		 */
-		if (test_bit(HCI_UNCONFIGURED, &hdev->dev_flags))
+		if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED))
 			set_bit(HCI_RAW, &hdev->flags);
 
 		/* For fully configured devices, this will send
@@ -2147,7 +2147,7 @@ static void hci_power_on(struct work_struct *work)
 		/* When the controller is now configured, then it
 		 * is important to clear the HCI_RAW flag.
 		 */
-		if (!test_bit(HCI_UNCONFIGURED, &hdev->dev_flags))
+		if (!hci_dev_test_flag(hdev, HCI_UNCONFIGURED))
 			clear_bit(HCI_RAW, &hdev->flags);
 
 		/* Powering on the controller with HCI_CONFIG set only
@@ -2986,7 +2986,7 @@ static void le_scan_restart_work(struct work_struct *work)
 	BT_DBG("%s", hdev->name);
 
 	/* If controller is not scanning we are done. */
-	if (!test_bit(HCI_LE_SCAN, &hdev->dev_flags))
+	if (!hci_dev_test_flag(hdev, HCI_LE_SCAN))
 		return;
 
 	hci_req_init(&req, hdev);
@@ -3021,7 +3021,7 @@ void hci_copy_identity_address(struct hci_dev *hdev, bdaddr_t *bdaddr,
 {
 	if (test_bit(HCI_FORCE_STATIC_ADDR, &hdev->dbg_flags) ||
 	    !bacmp(&hdev->bdaddr, BDADDR_ANY) ||
-	    (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags) &&
+	    (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED) &&
 	     bacmp(&hdev->static_addr, BDADDR_ANY))) {
 		bacpy(bdaddr, &hdev->static_addr);
 		*bdaddr_type = ADDR_LE_DEV_RANDOM;
@@ -3251,8 +3251,8 @@ void hci_unregister_dev(struct hci_dev *hdev)
 	cancel_work_sync(&hdev->power_on);
 
 	if (!test_bit(HCI_INIT, &hdev->flags) &&
-	    !test_bit(HCI_SETUP, &hdev->dev_flags) &&
-	    !test_bit(HCI_CONFIG, &hdev->dev_flags)) {
+	    !hci_dev_test_flag(hdev, HCI_SETUP) &&
+	    !hci_dev_test_flag(hdev, HCI_CONFIG)) {
 		hci_dev_lock(hdev);
 		mgmt_index_removed(hdev);
 		hci_dev_unlock(hdev);
@@ -3926,7 +3926,7 @@ static inline int __get_blocks(struct hci_dev *hdev, struct sk_buff *skb)
 
 static void __check_timeout(struct hci_dev *hdev, unsigned int cnt)
 {
-	if (!test_bit(HCI_UNCONFIGURED, &hdev->dev_flags)) {
+	if (!hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) {
 		/* ACL tx timeout must be longer than maximum
 		 * link supervision timeout (40.9 seconds) */
 		if (!cnt && time_after(jiffies, hdev->acl_last_tx +
@@ -4109,7 +4109,7 @@ static void hci_sched_le(struct hci_dev *hdev)
 	if (!hci_conn_num(hdev, LE_LINK))
 		return;
 
-	if (!test_bit(HCI_UNCONFIGURED, &hdev->dev_flags)) {
+	if (!hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) {
 		/* LE tx timeout must be longer than maximum
 		 * link supervision timeout (40.9 seconds) */
 		if (!hdev->le_cnt && hdev->le_pkts &&
@@ -4157,7 +4157,7 @@ static void hci_tx_work(struct work_struct *work)
 	BT_DBG("%s acl %d sco %d le %d", hdev->name, hdev->acl_cnt,
 	       hdev->sco_cnt, hdev->le_cnt);
 
-	if (!test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) {
+	if (!hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) {
 		/* Schedule queues and send stuff to HCI driver */
 		hci_sched_acl(hdev);
 		hci_sched_sco(hdev);
@@ -4354,7 +4354,7 @@ static void hci_rx_work(struct work_struct *work)
 			hci_send_to_sock(hdev, skb);
 		}
 
-		if (test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) {
+		if (hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) {
 			kfree_skb(skb);
 			continue;
 		}