diff options
Diffstat (limited to 'net/mac80211/rx.c')
-rw-r--r-- | net/mac80211/rx.c | 522 |
1 files changed, 342 insertions, 180 deletions
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index fa0f37e4afe4..c0368152b721 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -538,20 +538,12 @@ static void ieee80211_release_reorder_frame(struct ieee80211_hw *hw, int index, struct sk_buff_head *frames) { - struct ieee80211_supported_band *sband; - struct ieee80211_rate *rate = NULL; struct sk_buff *skb = tid_agg_rx->reorder_buf[index]; - struct ieee80211_rx_status *status; if (!skb) goto no_frame; - status = IEEE80211_SKB_RXCB(skb); - - /* release the reordered frames to stack */ - sband = hw->wiphy->bands[status->band]; - if (!(status->flag & RX_FLAG_HT)) - rate = &sband->bitrates[status->rate_idx]; + /* release the frame from the reorder ring buffer */ tid_agg_rx->stored_mpdu_num--; tid_agg_rx->reorder_buf[index] = NULL; __skb_queue_tail(frames, skb); @@ -580,9 +572,78 @@ static void ieee80211_release_reorder_frames(struct ieee80211_hw *hw, * frames that have not yet been received are assumed to be lost and the skb * can be released for processing. This may also release other skb's from the * reorder buffer if there are no additional gaps between the frames. + * + * Callers must hold tid_agg_rx->reorder_lock. */ #define HT_RX_REORDER_BUF_TIMEOUT (HZ / 10) +static void ieee80211_sta_reorder_release(struct ieee80211_hw *hw, + struct tid_ampdu_rx *tid_agg_rx, + struct sk_buff_head *frames) +{ + int index, j; + + /* release the buffer until next missing frame */ + index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) % + tid_agg_rx->buf_size; + if (!tid_agg_rx->reorder_buf[index] && + tid_agg_rx->stored_mpdu_num > 1) { + /* + * No buffers ready to be released, but check whether any + * frames in the reorder buffer have timed out. + */ + int skipped = 1; + for (j = (index + 1) % tid_agg_rx->buf_size; j != index; + j = (j + 1) % tid_agg_rx->buf_size) { + if (!tid_agg_rx->reorder_buf[j]) { + skipped++; + continue; + } + if (!time_after(jiffies, tid_agg_rx->reorder_time[j] + + HT_RX_REORDER_BUF_TIMEOUT)) + goto set_release_timer; + +#ifdef CONFIG_MAC80211_HT_DEBUG + if (net_ratelimit()) + wiphy_debug(hw->wiphy, + "release an RX reorder frame due to timeout on earlier frames\n"); +#endif + ieee80211_release_reorder_frame(hw, tid_agg_rx, + j, frames); + + /* + * Increment the head seq# also for the skipped slots. + */ + tid_agg_rx->head_seq_num = + (tid_agg_rx->head_seq_num + skipped) & SEQ_MASK; + skipped = 0; + } + } else while (tid_agg_rx->reorder_buf[index]) { + ieee80211_release_reorder_frame(hw, tid_agg_rx, index, frames); + index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) % + tid_agg_rx->buf_size; + } + + if (tid_agg_rx->stored_mpdu_num) { + j = index = seq_sub(tid_agg_rx->head_seq_num, + tid_agg_rx->ssn) % tid_agg_rx->buf_size; + + for (; j != (index - 1) % tid_agg_rx->buf_size; + j = (j + 1) % tid_agg_rx->buf_size) { + if (tid_agg_rx->reorder_buf[j]) + break; + } + + set_release_timer: + + mod_timer(&tid_agg_rx->reorder_timer, + tid_agg_rx->reorder_time[j] + + HT_RX_REORDER_BUF_TIMEOUT); + } else { + del_timer(&tid_agg_rx->reorder_timer); + } +} + /* * As this function belongs to the RX path it must be under * rcu_read_lock protection. It returns false if the frame @@ -598,14 +659,16 @@ static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw, u16 mpdu_seq_num = (sc & IEEE80211_SCTL_SEQ) >> 4; u16 head_seq_num, buf_size; int index; + bool ret = true; buf_size = tid_agg_rx->buf_size; head_seq_num = tid_agg_rx->head_seq_num; + spin_lock(&tid_agg_rx->reorder_lock); /* frame with out of date sequence number */ if (seq_less(mpdu_seq_num, head_seq_num)) { dev_kfree_skb(skb); - return true; + goto out; } /* @@ -626,7 +689,7 @@ static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw, /* check if we already stored this frame */ if (tid_agg_rx->reorder_buf[index]) { dev_kfree_skb(skb); - return true; + goto out; } /* @@ -636,58 +699,19 @@ static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw, if (mpdu_seq_num == tid_agg_rx->head_seq_num && tid_agg_rx->stored_mpdu_num == 0) { tid_agg_rx->head_seq_num = seq_inc(tid_agg_rx->head_seq_num); - return false; + ret = false; + goto out; } /* put the frame in the reordering buffer */ tid_agg_rx->reorder_buf[index] = skb; tid_agg_rx->reorder_time[index] = jiffies; tid_agg_rx->stored_mpdu_num++; - /* release the buffer until next missing frame */ - index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) % - tid_agg_rx->buf_size; - if (!tid_agg_rx->reorder_buf[index] && - tid_agg_rx->stored_mpdu_num > 1) { - /* - * No buffers ready to be released, but check whether any - * frames in the reorder buffer have timed out. - */ - int j; - int skipped = 1; - for (j = (index + 1) % tid_agg_rx->buf_size; j != index; - j = (j + 1) % tid_agg_rx->buf_size) { - if (!tid_agg_rx->reorder_buf[j]) { - skipped++; - continue; - } - if (!time_after(jiffies, tid_agg_rx->reorder_time[j] + - HT_RX_REORDER_BUF_TIMEOUT)) - break; - -#ifdef CONFIG_MAC80211_HT_DEBUG - if (net_ratelimit()) - printk(KERN_DEBUG "%s: release an RX reorder " - "frame due to timeout on earlier " - "frames\n", - wiphy_name(hw->wiphy)); -#endif - ieee80211_release_reorder_frame(hw, tid_agg_rx, - j, frames); - - /* - * Increment the head seq# also for the skipped slots. - */ - tid_agg_rx->head_seq_num = - (tid_agg_rx->head_seq_num + skipped) & SEQ_MASK; - skipped = 0; - } - } else while (tid_agg_rx->reorder_buf[index]) { - ieee80211_release_reorder_frame(hw, tid_agg_rx, index, frames); - index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) % - tid_agg_rx->buf_size; - } + ieee80211_sta_reorder_release(hw, tid_agg_rx, frames); - return true; + out: + spin_unlock(&tid_agg_rx->reorder_lock); + return ret; } /* @@ -873,6 +897,9 @@ ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx) if (!is_multicast_ether_addr(hdr->addr1) && stakey) { rx->key = stakey; + if ((status->flag & RX_FLAG_DECRYPTED) && + (status->flag & RX_FLAG_IV_STRIPPED)) + return RX_CONTINUE; /* Skip decryption if the frame is not protected. */ if (!ieee80211_has_protected(fc)) return RX_CONTINUE; @@ -935,7 +962,8 @@ ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx) * pairwise or station-to-station keys, but for WEP we allow * using a key index as well. */ - if (rx->key && rx->key->conf.alg != ALG_WEP && + if (rx->key && rx->key->conf.cipher != WLAN_CIPHER_SUITE_WEP40 && + rx->key->conf.cipher != WLAN_CIPHER_SUITE_WEP104 && !is_multicast_ether_addr(hdr->addr1)) rx->key = NULL; } @@ -951,8 +979,9 @@ ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx) return RX_DROP_UNUSABLE; /* the hdr variable is invalid now! */ - switch (rx->key->conf.alg) { - case ALG_WEP: + switch (rx->key->conf.cipher) { + case WLAN_CIPHER_SUITE_WEP40: + case WLAN_CIPHER_SUITE_WEP104: /* Check for weak IVs if possible */ if (rx->sta && ieee80211_is_data(fc) && (!(status->flag & RX_FLAG_IV_STRIPPED) || @@ -962,15 +991,21 @@ ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx) result = ieee80211_crypto_wep_decrypt(rx); break; - case ALG_TKIP: + case WLAN_CIPHER_SUITE_TKIP: result = ieee80211_crypto_tkip_decrypt(rx); break; - case ALG_CCMP: + case WLAN_CIPHER_SUITE_CCMP: result = ieee80211_crypto_ccmp_decrypt(rx); break; - case ALG_AES_CMAC: + case WLAN_CIPHER_SUITE_AES_CMAC: result = ieee80211_crypto_aes_cmac_decrypt(rx); break; + default: + /* + * We can reach here only with HW-only algorithms + * but why didn't it decrypt the frame?! + */ + return RX_DROP_UNUSABLE; } /* either the frame has been decrypted or will be dropped */ @@ -1265,7 +1300,7 @@ ieee80211_rx_h_defragment(struct ieee80211_rx_data *rx) /* This is the first fragment of a new frame. */ entry = ieee80211_reassemble_add(rx->sdata, frag, seq, rx->queue, &(rx->skb)); - if (rx->key && rx->key->conf.alg == ALG_CCMP && + if (rx->key && rx->key->conf.cipher == WLAN_CIPHER_SUITE_CCMP && ieee80211_has_protected(fc)) { int queue = ieee80211_is_mgmt(fc) ? NUM_RX_DATA_QUEUES : rx->queue; @@ -1294,7 +1329,7 @@ ieee80211_rx_h_defragment(struct ieee80211_rx_data *rx) int i; u8 pn[CCMP_PN_LEN], *rpn; int queue; - if (!rx->key || rx->key->conf.alg != ALG_CCMP) + if (!rx->key || rx->key->conf.cipher != WLAN_CIPHER_SUITE_CCMP) return RX_DROP_UNUSABLE; memcpy(pn, entry->last_pn, CCMP_PN_LEN); for (i = CCMP_PN_LEN - 1; i >= 0; i--) { @@ -1492,7 +1527,7 @@ static bool ieee80211_frame_allowed(struct ieee80211_rx_data *rx, __le16 fc) * Allow EAPOL frames to us/the PAE group address regardless * of whether the frame was encrypted or not. */ - if (ehdr->h_proto == htons(ETH_P_PAE) && + if (ehdr->h_proto == rx->sdata->control_port_protocol && (compare_ether_addr(ehdr->h_dest, rx->sdata->vif.addr) == 0 || compare_ether_addr(ehdr->h_dest, pae_group_addr) == 0)) return true; @@ -1909,13 +1944,36 @@ static void ieee80211_process_sa_query_req(struct ieee80211_sub_if_data *sdata, } static ieee80211_rx_result debug_noinline +ieee80211_rx_h_mgmt_check(struct ieee80211_rx_data *rx) +{ + struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *) rx->skb->data; + + /* + * From here on, look only at management frames. + * Data and control frames are already handled, + * and unknown (reserved) frames are useless. + */ + if (rx->skb->len < 24) + return RX_DROP_MONITOR; + + if (!ieee80211_is_mgmt(mgmt->frame_control)) + return RX_DROP_MONITOR; + + if (!(rx->flags & IEEE80211_RX_RA_MATCH)) + return RX_DROP_MONITOR; + + if (ieee80211_drop_unencrypted_mgmt(rx)) + return RX_DROP_UNUSABLE; + + return RX_CONTINUE; +} + +static ieee80211_rx_result debug_noinline ieee80211_rx_h_action(struct ieee80211_rx_data *rx) { struct ieee80211_local *local = rx->local; struct ieee80211_sub_if_data *sdata = rx->sdata; struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *) rx->skb->data; - struct sk_buff *nskb; - struct ieee80211_rx_status *status; int len = rx->skb->len; if (!ieee80211_is_action(mgmt->frame_control)) @@ -1931,9 +1989,6 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) if (!(rx->flags & IEEE80211_RX_RA_MATCH)) return RX_DROP_UNUSABLE; - if (ieee80211_drop_unencrypted_mgmt(rx)) - return RX_DROP_UNUSABLE; - switch (mgmt->u.action.category) { case WLAN_CATEGORY_BACK: /* @@ -2024,17 +2079,36 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) goto queue; } + return RX_CONTINUE; + invalid: - /* - * For AP mode, hostapd is responsible for handling any action - * frames that we didn't handle, including returning unknown - * ones. For all other modes we will return them to the sender, - * setting the 0x80 bit in the action category, as required by - * 802.11-2007 7.3.1.11. - */ - if (sdata->vif.type == NL80211_IFTYPE_AP || - sdata->vif.type == NL80211_IFTYPE_AP_VLAN) - return RX_DROP_MONITOR; + rx->flags |= IEEE80211_MALFORMED_ACTION_FRM; + /* will return in the next handlers */ + return RX_CONTINUE; + + handled: + if (rx->sta) + rx->sta->rx_packets++; + dev_kfree_skb(rx->skb); + return RX_QUEUED; + + queue: + rx->skb->pkt_type = IEEE80211_SDATA_QUEUE_TYPE_FRAME; + skb_queue_tail(&sdata->skb_queue, rx->skb); + ieee80211_queue_work(&local->hw, &sdata->work); + if (rx->sta) + rx->sta->rx_packets++; + return RX_QUEUED; +} + +static ieee80211_rx_result debug_noinline +ieee80211_rx_h_userspace_mgmt(struct ieee80211_rx_data *rx) +{ + struct ieee80211_rx_status *status; + + /* skip known-bad action frames and return them in the next handler */ + if (rx->flags & IEEE80211_MALFORMED_ACTION_FRM) + return RX_CONTINUE; /* * Getting here means the kernel doesn't know how to handle @@ -2044,10 +2118,44 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) */ status = IEEE80211_SKB_RXCB(rx->skb); - if (cfg80211_rx_action(rx->sdata->dev, status->freq, - rx->skb->data, rx->skb->len, - GFP_ATOMIC)) - goto handled; + if (cfg80211_rx_mgmt(rx->sdata->dev, status->freq, + rx->skb->data, rx->skb->len, + GFP_ATOMIC)) { + if (rx->sta) + rx->sta->rx_packets++; + dev_kfree_skb(rx->skb); + return RX_QUEUED; + } + + + return RX_CONTINUE; +} + +static ieee80211_rx_result debug_noinline +ieee80211_rx_h_action_return(struct ieee80211_rx_data *rx) +{ + struct ieee80211_local *local = rx->local; + struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *) rx->skb->data; + struct sk_buff *nskb; + struct ieee80211_sub_if_data *sdata = rx->sdata; + + if (!ieee80211_is_action(mgmt->frame_control)) + return RX_CONTINUE; + + /* + * For AP mode, hostapd is responsible for handling any action + * frames that we didn't handle, including returning unknown + * ones. For all other modes we will return them to the sender, + * setting the 0x80 bit in the action category, as required by + * 802.11-2007 7.3.1.11. + * Newer versions of hostapd shall also use the management frame + * registration mechanisms, but older ones still use cooked + * monitor interfaces so push all frames there. + */ + if (!(rx->flags & IEEE80211_MALFORMED_ACTION_FRM) && + (sdata->vif.type == NL80211_IFTYPE_AP || + sdata->vif.type == NL80211_IFTYPE_AP_VLAN)) + return RX_DROP_MONITOR; /* do not return rejected action frames */ if (mgmt->u.action.category & 0x80) @@ -2066,20 +2174,8 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) ieee80211_tx_skb(rx->sdata, nskb); } - - handled: - if (rx->sta) - rx->sta->rx_packets++; dev_kfree_skb(rx->skb); return RX_QUEUED; - - queue: - rx->skb->pkt_type = IEEE80211_SDATA_QUEUE_TYPE_FRAME; - skb_queue_tail(&sdata->skb_queue, rx->skb); - ieee80211_queue_work(&local->hw, &sdata->work); - if (rx->sta) - rx->sta->rx_packets++; - return RX_QUEUED; } static ieee80211_rx_result debug_noinline @@ -2090,15 +2186,6 @@ ieee80211_rx_h_mgmt(struct ieee80211_rx_data *rx) struct ieee80211_mgmt *mgmt = (void *)rx->skb->data; __le16 stype; - if (!(rx->flags & IEEE80211_RX_RA_MATCH)) - return RX_DROP_MONITOR; - - if (rx->skb->len < 24) - return RX_DROP_MONITOR; - - if (ieee80211_drop_unencrypted_mgmt(rx)) - return RX_DROP_UNUSABLE; - rxs = ieee80211_work_rx_mgmt(rx->sdata, rx->skb); if (rxs != RX_CONTINUE) return rxs; @@ -2267,19 +2354,46 @@ static void ieee80211_rx_cooked_monitor(struct ieee80211_rx_data *rx, dev_kfree_skb(skb); } +static void ieee80211_rx_handlers_result(struct ieee80211_rx_data *rx, + ieee80211_rx_result res) +{ + switch (res) { + case RX_DROP_MONITOR: + I802_DEBUG_INC(rx->sdata->local->rx_handlers_drop); + if (rx->sta) + rx->sta->rx_dropped++; + /* fall through */ + case RX_CONTINUE: { + struct ieee80211_rate *rate = NULL; + struct ieee80211_supported_band *sband; + struct ieee80211_rx_status *status; + + status = IEEE80211_SKB_RXCB((rx->skb)); + + sband = rx->local->hw.wiphy->bands[status->band]; + if (!(status->flag & RX_FLAG_HT)) + rate = &sband->bitrates[status->rate_idx]; + + ieee80211_rx_cooked_monitor(rx, rate); + break; + } + case RX_DROP_UNUSABLE: + I802_DEBUG_INC(rx->sdata->local->rx_handlers_drop); + if (rx->sta) + rx->sta->rx_dropped++; + dev_kfree_skb(rx->skb); + break; + case RX_QUEUED: + I802_DEBUG_INC(rx->sdata->local->rx_handlers_queued); + break; + } +} -static void ieee80211_invoke_rx_handlers(struct ieee80211_sub_if_data *sdata, - struct ieee80211_rx_data *rx, - struct sk_buff *skb, - struct ieee80211_rate *rate) +static void ieee80211_rx_handlers(struct ieee80211_rx_data *rx, + struct sk_buff_head *frames) { - struct sk_buff_head reorder_release; ieee80211_rx_result res = RX_DROP_MONITOR; - - __skb_queue_head_init(&reorder_release); - - rx->skb = skb; - rx->sdata = sdata; + struct sk_buff *skb; #define CALL_RXH(rxh) \ do { \ @@ -2288,17 +2402,7 @@ static void ieee80211_invoke_rx_handlers(struct ieee80211_sub_if_data *sdata, goto rxh_next; \ } while (0); - /* - * NB: the rxh_next label works even if we jump - * to it from here because then the list will - * be empty, which is a trivial check - */ - CALL_RXH(ieee80211_rx_h_passive_scan) - CALL_RXH(ieee80211_rx_h_check) - - ieee80211_rx_reorder_ampdu(rx, &reorder_release); - - while ((skb = __skb_dequeue(&reorder_release))) { + while ((skb = __skb_dequeue(frames))) { /* * all the other fields are valid across frames * that belong to an aMPDU since they are on the @@ -2316,42 +2420,95 @@ static void ieee80211_invoke_rx_handlers(struct ieee80211_sub_if_data *sdata, CALL_RXH(ieee80211_rx_h_remove_qos_control) CALL_RXH(ieee80211_rx_h_amsdu) #ifdef CONFIG_MAC80211_MESH - if (ieee80211_vif_is_mesh(&sdata->vif)) + if (ieee80211_vif_is_mesh(&rx->sdata->vif)) CALL_RXH(ieee80211_rx_h_mesh_fwding); #endif CALL_RXH(ieee80211_rx_h_data) /* special treatment -- needs the queue */ - res = ieee80211_rx_h_ctrl(rx, &reorder_release); + res = ieee80211_rx_h_ctrl(rx, frames); if (res != RX_CONTINUE) goto rxh_next; + CALL_RXH(ieee80211_rx_h_mgmt_check) CALL_RXH(ieee80211_rx_h_action) + CALL_RXH(ieee80211_rx_h_userspace_mgmt) + CALL_RXH(ieee80211_rx_h_action_return) CALL_RXH(ieee80211_rx_h_mgmt) + rxh_next: + ieee80211_rx_handlers_result(rx, res); + #undef CALL_RXH + } +} + +static void ieee80211_invoke_rx_handlers(struct ieee80211_sub_if_data *sdata, + struct ieee80211_rx_data *rx, + struct sk_buff *skb) +{ + struct sk_buff_head reorder_release; + ieee80211_rx_result res = RX_DROP_MONITOR; + + __skb_queue_head_init(&reorder_release); + + rx->skb = skb; + rx->sdata = sdata; + +#define CALL_RXH(rxh) \ + do { \ + res = rxh(rx); \ + if (res != RX_CONTINUE) \ + goto rxh_next; \ + } while (0); + + CALL_RXH(ieee80211_rx_h_passive_scan) + CALL_RXH(ieee80211_rx_h_check) + + ieee80211_rx_reorder_ampdu(rx, &reorder_release); + + ieee80211_rx_handlers(rx, &reorder_release); + return; rxh_next: - switch (res) { - case RX_DROP_MONITOR: - I802_DEBUG_INC(sdata->local->rx_handlers_drop); - if (rx->sta) - rx->sta->rx_dropped++; - /* fall through */ - case RX_CONTINUE: - ieee80211_rx_cooked_monitor(rx, rate); - break; - case RX_DROP_UNUSABLE: - I802_DEBUG_INC(sdata->local->rx_handlers_drop); - if (rx->sta) - rx->sta->rx_dropped++; - dev_kfree_skb(rx->skb); - break; - case RX_QUEUED: - I802_DEBUG_INC(sdata->local->rx_handlers_queued); - break; - } - } + ieee80211_rx_handlers_result(rx, res); + +#undef CALL_RXH +} + +/* + * This function makes calls into the RX path. Therefore the + * caller must hold the sta_info->lock and everything has to + * be under rcu_read_lock protection as well. + */ +void ieee80211_release_reorder_timeout(struct sta_info *sta, int tid) +{ + struct sk_buff_head frames; + struct ieee80211_rx_data rx = { }; + struct tid_ampdu_rx *tid_agg_rx; + + tid_agg_rx = rcu_dereference(sta->ampdu_mlme.tid_rx[tid]); + if (!tid_agg_rx) + return; + + __skb_queue_head_init(&frames); + + /* construct rx struct */ + rx.sta = sta; + rx.sdata = sta->sdata; + rx.local = sta->local; + rx.queue = tid; + rx.flags |= IEEE80211_RX_RA_MATCH; + + if (unlikely(test_bit(SCAN_HW_SCANNING, &sta->local->scanning) || + test_bit(SCAN_OFF_CHANNEL, &sta->local->scanning))) + rx.flags |= IEEE80211_RX_IN_SCAN; + + spin_lock(&tid_agg_rx->reorder_lock); + ieee80211_sta_reorder_release(&sta->local->hw, tid_agg_rx, &frames); + spin_unlock(&tid_agg_rx->reorder_lock); + + ieee80211_rx_handlers(&rx, &frames); } /* main receive path */ @@ -2431,9 +2588,7 @@ static int prepare_for_handlers(struct ieee80211_sub_if_data *sdata, if (compare_ether_addr(sdata->u.wds.remote_addr, hdr->addr2)) return 0; break; - case NL80211_IFTYPE_MONITOR: - case NL80211_IFTYPE_UNSPECIFIED: - case __NL80211_IFTYPE_AFTER_LAST: + default: /* should never get here */ WARN_ON(1); break; @@ -2447,8 +2602,7 @@ static int prepare_for_handlers(struct ieee80211_sub_if_data *sdata, * be called with rcu_read_lock protection. */ static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw, - struct sk_buff *skb, - struct ieee80211_rate *rate) + struct sk_buff *skb) { struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); struct ieee80211_local *local = hw_to_local(hw); @@ -2550,13 +2704,12 @@ static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw, skb_new = skb_copy(skb, GFP_ATOMIC); if (!skb_new) { if (net_ratelimit()) - printk(KERN_DEBUG "%s: failed to copy " - "multicast frame for %s\n", - wiphy_name(local->hw.wiphy), - prev->name); + wiphy_debug(local->hw.wiphy, + "failed to copy multicast frame for %s\n", + prev->name); goto next; } - ieee80211_invoke_rx_handlers(prev, &rx, skb_new, rate); + ieee80211_invoke_rx_handlers(prev, &rx, skb_new); next: prev = sdata; } @@ -2572,7 +2725,7 @@ next: } } if (prev) - ieee80211_invoke_rx_handlers(prev, &rx, skb, rate); + ieee80211_invoke_rx_handlers(prev, &rx, skb); else dev_kfree_skb(skb); } @@ -2615,28 +2768,37 @@ void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb) if (WARN_ON(!local->started)) goto drop; - if (status->flag & RX_FLAG_HT) { + if (likely(!(status->flag & RX_FLAG_FAILED_PLCP_CRC))) { /* - * rate_idx is MCS index, which can be [0-76] as documented on: - * - * http://wireless.kernel.org/en/developers/Documentation/ieee80211/802.11n - * - * Anything else would be some sort of driver or hardware error. - * The driver should catch hardware errors. + * Validate the rate, unless a PLCP error means that + * we probably can't have a valid rate here anyway. */ - if (WARN((status->rate_idx < 0 || - status->rate_idx > 76), - "Rate marked as an HT rate but passed " - "status->rate_idx is not " - "an MCS index [0-76]: %d (0x%02x)\n", - status->rate_idx, - status->rate_idx)) - goto drop; - } else { - if (WARN_ON(status->rate_idx < 0 || - status->rate_idx >= sband->n_bitrates)) - goto drop; - rate = &sband->bitrates[status->rate_idx]; + + if (status->flag & RX_FLAG_HT) { + /* + * rate_idx is MCS index, which can be [0-76] + * as documented on: + * + * http://wireless.kernel.org/en/developers/Documentation/ieee80211/802.11n + * + * Anything else would be some sort of driver or + * hardware error. The driver should catch hardware + * errors. + */ + if (WARN((status->rate_idx < 0 || + status->rate_idx > 76), + "Rate marked as an HT rate but passed " + "status->rate_idx is not " + "an MCS index [0-76]: %d (0x%02x)\n", + status->rate_idx, + status->rate_idx)) + goto drop; + } else { + if (WARN_ON(status->rate_idx < 0 || + status->rate_idx >= sband->n_bitrates)) + goto drop; + rate = &sband->bitrates[status->rate_idx]; + } } /* @@ -2658,7 +2820,7 @@ void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb) return; } - __ieee80211_rx_handle_packet(hw, skb, rate); + __ieee80211_rx_handle_packet(hw, skb); rcu_read_unlock(); |