diff options
Diffstat (limited to 'sound/soc/codecs/sgtl5000.c')
| -rw-r--r-- | sound/soc/codecs/sgtl5000.c | 56 |
1 files changed, 47 insertions, 9 deletions
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 3593a1496056..e673f6ceb521 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -948,7 +948,7 @@ static int sgtl5000_set_bias_level(struct snd_soc_codec *codec, case SND_SOC_BIAS_PREPARE: break; case SND_SOC_BIAS_STANDBY: - if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) { + if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_OFF) { ret = regulator_bulk_enable( ARRAY_SIZE(sgtl5000->supplies), sgtl5000->supplies); @@ -979,7 +979,6 @@ static int sgtl5000_set_bias_level(struct snd_soc_codec *codec, break; } - codec->dapm.bias_level = level; return 0; } @@ -1092,6 +1091,19 @@ static bool sgtl5000_readable(struct device *dev, unsigned int reg) } /* + * This precalculated table contains all (vag_val * 100 / lo_calcntrl) results + * to select an appropriate lo_vol_* in SGTL5000_CHIP_LINE_OUT_VOL + * The calculatation was done for all possible register values which + * is the array index and the following formula: 10^((idx−15)/40) * 100 + */ +static const u8 vol_quot_table[] = { + 42, 45, 47, 50, 53, 56, 60, 63, + 67, 71, 75, 79, 84, 89, 94, 100, + 106, 112, 119, 126, 133, 141, 150, 158, + 168, 178, 188, 200, 211, 224, 237, 251 +}; + +/* * sgtl5000 has 3 internal power supplies: * 1. VAG, normally set to vdda/2 * 2. charge pump, set to different value @@ -1111,6 +1123,10 @@ static int sgtl5000_set_power_regs(struct snd_soc_codec *codec) u16 ana_pwr; u16 lreg_ctrl; int vag; + int lo_vag; + int vol_quot; + int lo_vol; + size_t i; struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec); vdda = regulator_get_voltage(sgtl5000->supplies[VDDA].consumer); @@ -1198,23 +1214,45 @@ static int sgtl5000_set_power_regs(struct snd_soc_codec *codec) SGTL5000_ANA_GND_MASK, vag << SGTL5000_ANA_GND_SHIFT); /* set line out VAG to vddio / 2, in range (0.8v, 1.675v) */ - vag = vddio / 2; - if (vag <= SGTL5000_LINE_OUT_GND_BASE) - vag = 0; - else if (vag >= SGTL5000_LINE_OUT_GND_BASE + + lo_vag = vddio / 2; + if (lo_vag <= SGTL5000_LINE_OUT_GND_BASE) + lo_vag = 0; + else if (lo_vag >= SGTL5000_LINE_OUT_GND_BASE + SGTL5000_LINE_OUT_GND_STP * SGTL5000_LINE_OUT_GND_MAX) - vag = SGTL5000_LINE_OUT_GND_MAX; + lo_vag = SGTL5000_LINE_OUT_GND_MAX; else - vag = (vag - SGTL5000_LINE_OUT_GND_BASE) / + lo_vag = (lo_vag - SGTL5000_LINE_OUT_GND_BASE) / SGTL5000_LINE_OUT_GND_STP; snd_soc_update_bits(codec, SGTL5000_CHIP_LINE_OUT_CTRL, SGTL5000_LINE_OUT_CURRENT_MASK | SGTL5000_LINE_OUT_GND_MASK, - vag << SGTL5000_LINE_OUT_GND_SHIFT | + lo_vag << SGTL5000_LINE_OUT_GND_SHIFT | SGTL5000_LINE_OUT_CURRENT_360u << SGTL5000_LINE_OUT_CURRENT_SHIFT); + /* + * Set lineout output level in range (0..31) + * the same value is used for right and left channel + * + * Searching for a suitable index solving this formula: + * idx = 40 * log10(vag_val / lo_cagcntrl) + 15 + */ + vol_quot = (vag * 100) / lo_vag; + lo_vol = 0; + for (i = 0; i < ARRAY_SIZE(vol_quot_table); i++) { + if (vol_quot >= vol_quot_table[i]) + lo_vol = i; + else + break; + } + + snd_soc_update_bits(codec, SGTL5000_CHIP_LINE_OUT_VOL, + SGTL5000_LINE_OUT_VOL_RIGHT_MASK | + SGTL5000_LINE_OUT_VOL_LEFT_MASK, + lo_vol << SGTL5000_LINE_OUT_VOL_RIGHT_SHIFT | + lo_vol << SGTL5000_LINE_OUT_VOL_LEFT_SHIFT); + return 0; } |