summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* [media] af9033: add IT9135 tuner config "38" init tableAntti Palosaari2013-03-212-0/+220
| | | | | | | Dumped out from the Windows driver version 12.07.06.1 Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] af9035: change dual mode boolean to bit fieldAntti Palosaari2013-03-211-1/+9
| | | | | | | | | | | For some reason there seems to be value 0x03 in eeprom for dual mode (and 0x00 for single mode). Boolean is not always 1 bit wide - it could be 8 bit wide too. Storing number 0x03 to boolean causes driver to thing there is 4 tuners in some cases :o Add also some comments regarding to eeprom. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] af9035: enable remote controller for IT9135 tooAntti Palosaari2013-03-211-4/+0
| | | | | | | There is no difference towards AF9035 remote controller, so enable it. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] af9035: set demod TS mode config in read_config()Antti Palosaari2013-03-211-5/+2
| | | | | Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] af9035: use already detected eeprom base addrAntti Palosaari2013-03-211-9/+9
| | | | | | | | eeprom memory mapped base address is detected at the very first. Use it everywhere. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] af9035: select firmware loader according to firmwareAntti Palosaari2013-03-211-5/+5
| | | | | | | | AF9035 and IT9135 supports two different firmware format. Select correct loader according to first byte of firmware file. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] it913x: remove demod init reg tablesAntti Palosaari2013-03-212-219/+0
| | | | | | | These are demod inits and are already done by af9033 demod driver. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] af9033: add IT9135 demod reg init tablesAntti Palosaari2013-03-212-1/+214
| | | | | | | Dumped out from Windows driver version 12.07.06.1, 07/06/2012. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] it913x: use dev_foo() loggingAntti Palosaari2013-03-211-5/+11
| | | | | Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] it913x: include tuner IDs from af9033.hAntti Palosaari2013-03-212-21/+13
| | | | | Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] it913x: remove unused variablesAntti Palosaari2013-03-212-24/+2
| | | | | Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] it913x: get rid of it913x config structAntti Palosaari2013-03-213-48/+30
| | | | | | | We don't need it. Tuner ID and device address are enough. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] it913x: tuner power up routinesAntti Palosaari2013-03-211-4/+8
| | | | | | | | | Copy forgotten power up registers from it913x-fe driver. Remove two demod registers as those are already written by af9033 driver. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] it913x: rename functions and variablesAntti Palosaari2013-03-211-34/+38
| | | | | Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] it913x: merge it913x_fe_suspend() to it913x_fe_sleep()Antti Palosaari2013-03-211-31/+1
| | | | | Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] it913x: merge it913x_fe_start() to it913x_init_tuner()Antti Palosaari2013-03-211-120/+45
| | | | | | | Merge those functions to one and disable sleep. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] af9035: IT9135 dual tuner related changesAntti Palosaari2013-03-212-102/+102
| | | | | | | Now it supports IT9135 based dual tuner devices. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] af9033: IT9135 v2 supported related changesAntti Palosaari2013-03-211-3/+28
| | | | | Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] af9035: basic support for IT9135 v2 chipsAntti Palosaari2013-03-211-13/+30
| | | | | Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] af9035: merge af9035 and it9135 eeprom read routinesAntti Palosaari2013-03-212-93/+73
| | | | | Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] af9035: USB1.1 support (== PID filters)Antti Palosaari2013-03-211-3/+82
| | | | | Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] af9035: constify clock tablesAntti Palosaari2013-03-211-2/+2
| | | | | Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] af9035: [0ccd:0099] TerraTec Cinergy T Stick Dual RC (rev. 2)Antti Palosaari2013-03-211-1/+41
| | | | | | | | That same USB ID is used both AF9015 and AF9035 driver. iManufacturer is only thing we can select correct driver without a I/O. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] af9015: reject device TerraTec Cinergy T Stick Dual RC (rev. 2)Antti Palosaari2013-03-211-1/+39
| | | | | | | | That same USB ID is used both AF9015 and AF9035 driver. iManufacturer is only thing we can select correct driver without a I/O. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] af9035: fix af9033 demod sampling frequencyAntti Palosaari2013-03-211-0/+1
| | | | | | | | ADC needs to be also multiplied to 2 as it9135. Fixes bug I introduced few commits ago. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] af9035: add auto configuration heuristic for it9135Antti Palosaari2013-03-212-34/+88
| | | | | | | | Detect automatically multiple chip versions and select configuration according to that. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] af9035: add support for 1st gen it9135Antti Palosaari2013-03-213-1/+25
| | | | | Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] af9033: support for it913x tunersAntti Palosaari2013-03-212-13/+36
| | | | | | | Add support for tuners integrated to the IT9135 and IT9137. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] ITE IT913X silicon tuner driverAntti Palosaari2013-03-215-0/+1514
| | | | | | | | It is tuner driver for tuner integrated to the ITE IT9135 and IT9137 chips. I split it out from the current it913x-fe driver. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] media/rc/imon.c: avoid flooding syslog with "unknown keypress" when ↵Kevin Baradon2013-03-211-11/+0
| | | | | | | | | | | | | | | | | | keypad is pressed My 15c2:0036 device floods syslog when a keypad key is pressed: Feb 18 19:00:57 homeserver kernel: imon 5-1:1.0: imon_incoming_packet: unknown keypress, code 0x100fff2 Feb 18 19:00:57 homeserver kernel: imon 5-1:1.0: imon_incoming_packet: unknown keypress, code 0x100fef2 Feb 18 19:00:57 homeserver kernel: imon 5-1:1.0: imon_incoming_packet: unknown keypress, code 0x100fff2 Feb 18 19:00:57 homeserver kernel: imon 5-1:1.0: imon_incoming_packet: unknown keypress, code 0x100fff2 Feb 18 19:00:57 homeserver kernel: imon 5-1:1.0: imon_incoming_packet: unknown keypress, code 0x100fff2 This patch removes those messages from imon, following suggestion from Mauro. Unknown keys shall be correctly handled by rc/input layer. Signed-off-by: Kevin Baradon <kevin.baradon@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] media/rc/imon.c: make send_packet() delay larger for 15c2:0036Kevin Baradon2013-03-211-4/+13
| | | | | | | | | | | | | | Some imon devices (like 15c2:0036) need a higher delay between send_packet calls. Default value is still 5ms to avoid regressions on already working hardware. Also use interruptible wait to avoid load average going too high (and let caller handle signals). Signed-off-by: Kevin Baradon <kevin.baradon@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] Corrected Oops on omap_vout when no manager is connectedFederico Fuga2013-03-211-4/+10
| | | | | | | | | | | | | | If no manager is connected to the vout device, the omapvid_init() function fails. No error condition is checked, and the device is started. Later on, when irq is serviced, a NULL pointer dereference occurs. Also, the isr routine must be registered only if no error occurs, otherwise the isr triggers without the proper setup, and the kernel oops again. To prevent this, the error condition is checked, and the streamon function exits with error. Also the isr registration call is moved after the setup procedure is completed. Reviewed-by: Prabhakar Lad <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] xc5000: fix incorrect debug printnkDmitri Belimov2013-03-211-7/+13
| | | | | | | | | | | | | | | | I found very small bug in xc5000 source. When set option debug=1 and listen a radio we see in dmesg xc5000: xc_SetTVStandard() Standard = M/N-NTSC/PAL-BTSC at all times. However, it should be, instead "FM Radio-INPUT1_MONO". That happens because xc5000_set_radio_freq() gets the correct value for VideoMode and AudioMode for radio and calls xc_SetTVStandard() where name of standard comes from the incorrect place priv->video_standard. This incorrect debug message makes debugging a little difficult. Signed-off-by: Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] soc_camera: remove two outdated selectsPaul Bolle2013-03-211-2/+0
| | | | | | | | | | | | | | | | | Release v2.6.30 removed the MT9M001_PCA9536_SWITCH and MT9V022_PCA9536_SWITCH Kconfig symbols, in commits 36034dc325ecab63c8cfb992fbf9a1a8e94738a2 ("V4L/DVB (11032): mt9m001: allow setting of bus width from board code") and e958e27adeade7fa085dd396a8a0dfaef7e338c1 ("V4L/DVB (11033): mt9v022: allow setting of bus width from board code"). These two commits removed all gpio related code from these two drivers. But they skipped removing their two selects of GPIO_PCA953X. Remove these now as they are outdated. Their dependencies can never evaluate to true anyhow. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] sh_vou: Use module_platform_driver_probe macroSachin Kamat2013-03-211-12/+1
| | | | | | | | | module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] sh_veu: Use module_platform_driver_probe macroSachin Kamat2013-03-211-12/+1
| | | | | | | | | module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] soc_camera/mx1_camera: Use module_platform_driver_probe macroSachin Kamat2013-03-211-12/+1
| | | | | | | | | module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] sh_veu.c: Convert to devm_ioremap_resource()Sachin Kamat2013-03-211-3/+4
| | | | | | | | | Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] soc_camera/pxa_camera: Convert to devm_ioremap_resource()Sachin Kamat2013-03-211-3/+5
| | | | | | | | | Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] soc_camera/sh_mobile_csi2: Convert to devm_ioremap_resource()Sachin Kamat2013-03-211-5/+4
| | | | | | | | | | | Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages; so all explicit error messages can be removed from the failure code paths. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] soc_camera/sh_mobile_ceu_camera: Convert to devm_ioremap_resource()Sachin Kamat2013-03-211-5/+4
| | | | | | | | | | | Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages; so all explicit error messages can be removed from the failure code paths. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] mt9v022 driver: send valid HORIZONTAL_BLANKING values to mt9v024 soc ↵Andrei Andreyanau2013-03-211-5/+14
| | | | | | | | | | | | | | | camera This patch fixes the issue that appears when mt9v024 camera is used with the mt9v022 soc camera driver. The minimum total row time is 690 columns (horizontal width + horizontal blanking). The minimum horizontal blanking is 61. Thus, when the window width is set below 627, horizontal blanking must be increased. For the mt9v024 camera the values above are correct and for the mt9v022 camera the correct values are in the existing kernel driver. Signed-off-by: Andrei Andreyanau <a.andreyanau@sam-solutions.net> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] mt9m111: fix Oops - initialise context before dereferencingGuennadi Liakhovetski2013-03-211-2/+3
| | | | | | | | | | | | A recent commit "[media] soc-camera: Push probe-time power management to drivers" causes an Oops during mt9m111 driver probing because its .ctx private data field is now dereferenced before it is initialised. Fix this by initialising the field earlier. Reported-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] soc-camera: mt9m111: Fix auto-exposure controlBenoît Thébaudeau2013-03-211-2/+2
| | | | | | | | | | | | | | | | Commit f9bd5843658e18a7097fc7258c60fb840109eaa8 changed V4L2_CID_EXPOSURE_AUTO from boolean to enum, and commit af8425c54beb3c32cbb503a379132b3975535289 changed the creation of this control into a menu for the mt9m111. However, mt9m111_set_autoexposure() is still interpreting the value set for this control as a boolean, which also conflicts with the default value of this control set to V4L2_EXPOSURE_AUTO (0). This patch makes mt9m111_set_autoexposure() interpret the value set for V4L2_CID_EXPOSURE_AUTO as defined by enum v4l2_exposure_auto_type. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Tested-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] ts2020: use customise option correctlyPaul Bolle2013-03-211-1/+1
| | | | | | | | | | The Kconfig entry for "TS2020 based tuners" defaults to modular if DVB_FE_CUSTOMISE is set. But that Kconfig symbol was replaced with MEDIA_SUBDRV_AUTOSELECT as of v3.7. So use the new symbol. And negate the logic, so we are in line with all the similar entries in this file. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] media: tvp514x: enable TVP514X for media controller based usageManjunath Hadli2013-03-211-9/+154
| | | | | | | | | | | add support for TVP514x as a media entity and support for pad operations. The decoder supports 1 output pad. The default format code was V4L2_MBUS_FMT_YUYV10_2X10 changed it to V4L2_MBUS_FMT_UYVY8_2X8. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] media: add support for decoder as one of media entity typesManjunath Hadli2013-03-212-0/+12
| | | | | | | | | | | | A lot of SOCs including Texas Instruments Davinci family mainly use video decoders as input devices. This patch adds a flag 'MEDIA_ENT_T_V4L2_SUBDEV_DECODER' media entity type for decoder's. Along side updates the documentation for this media entity type. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] media: ths7353: add support for ths7353 video amplifierLad, Prabhakar2013-03-214-62/+340
| | | | | | | | | | | | | | | The patch adds support for THS7353 video amplifier. The the THS7353 amplifier is very much similar to the existing THS7303 video amplifier driver. This patch appropriately makes changes to the existing ths7303 driver and adds support for the THS7353. This patch also adds V4L2_IDENT_THS7353 for the THS7353 chip and appropriate changes to Kconfig file for building. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Martin Bugge <marbugge@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] davinci_vpfe: Use module_platform_driver macroSachin Kamat2013-03-211-19/+1
| | | | | | | | | module_platform_driver() eliminates the boilerplate and simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] Drivers: staging: media: davinci_vpfe: Use resource_size functionAlexandru Gheorghiu2013-03-211-2/+1
| | | | | | | | | Use resource_size function on resource object instead of explicit computation. Signed-off-by: Alexandru Gheorghiu <gheorghiuandru@gmail.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 15:40:49 +0000