summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* bus: imx-weim: support CS GPR configurationShawn Guo2014-03-052-1/+85
| | | | | | | | | | | | | | | | | | | | | | | For imx50-weim and imx6q-weim type of devices, there might a WEIM CS space configuration register in General Purpose Register controller, e.g. IOMUXC_GPR1 on i.MX6Q. Depending on which configuration of the following 4 is chosen for given system, IOMUXC_GPR1[11:0] should be set up as 05, 033, 0113 or 01111 correspondingly. CS0(128M) CS1(0M) CS2(0M) CS3(0M) CS0(64M) CS1(64M) CS2(0M) CS3(0M) CS0(64M) CS1(32M) CS2(32M) CS3(0M) CS0(32M) CS1(32M) CS2(32M) CS3(32M) The patch creates a function for such type of devices, which scans 'ranges' property of WEIM node and build the GPR value incrementally. Thus the WEIM CS GPR can be set up automatically at boot time. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Philippe De Muyter <phdm@macqel.be> Tested-by: Philippe De Muyter <phdm@macqel.be>
* ARM: mach-imx: Kconfig: Remove IMX_HAVE_PLATFORM_IMX2_WDT from SOC_IMX53Fabio Estevam2014-03-051-1/+0
| | | | | | | | | | SOC_IMX53 is a device-tree only platform, so we don't need IMX_HAVE_PLATFORM_IMX2_WDT at all because this symbol only provides some code to help register imx2-wdt platform devices. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx_v6_v7_defconfig: Select CONFIG_DEBUG_FSFabio Estevam2014-03-051-0/+1
| | | | | | | | | | | CONFIG_DEBUG_FS is a very useful debug option as it allow us to access key data such as the clock tree, for example: mount -t debugfs debugfs /sys/kernel/debug cat /sys/kernel/debug/clk/clk_summary Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: mach-imx: Select CONFIG_SRAM at ARCH_MXC levelFabio Estevam2014-03-051-1/+1
| | | | | | | | | | | | | | | | | | | | Booting a mx6q system built with multi_v7_defconfig leads to the following error messages on boot: [ 0.037758] imx6q_ocram_suspend_init: ocram pool unavailable! [ 0.037768] imx6_pm_common_init: failed to initialize ocram suspend -19! This happens because CONFIG_SRAM is not selected by default in multi_v7_defconfig. Fix this by selecting CONFIG_SRAM at ARCH_MXC level, so that other SoCs could use the SRAM driver as well. As SRAM automatically selects GENERIC_ALLOCATOR, just drop it from the Kconfig entry. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx: add speed grading check for i.mx6 socAnson Huang2014-03-051-3/+23
| | | | | | | | | | | | | | | | The fuse map of speed_grading[1:0] defines the max speed of ARM, see below the definition: 2b'11: 1200000000Hz; 2b'10: 996000000Hz; 2b'01: 852000000Hz; -- i.MX6Q Only, exclusive with 996MHz. 2b'00: 792000000Hz; Need to remove all illegal setpoints according to fuse map. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx: avoid calling clk APIs in idle thread which may cause scheduleAnson Huang2014-03-051-6/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As clk_pllv3_wait_lock will call usleep_range, and the clk APIs mutex lock may be held when CPU entering idle, so calling clk APIs must be avoided in cpu idle thread, this is to avoid reschedule warning in cpu idle, just access register directly to achieve that. bad: scheduling from the idle thread! CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.0-rc1+ #657 Backtrace: [<80012188>] (dump_backtrace) from [<8001246c>] (show_stack+0x18/0x1c) r6:808c0038 r5:00000000 r4:808e5a1c r3:00000000 [<80012454>] (show_stack) from [<8064b2ec>] (dump_stack+0x84/0x9c) [<8064b268>] (dump_stack) from [<80055ee0>] (dequeue_task_idle+0x20/0x30) r5:808bef40 r4:bf7dff40 [<80055ec0>] (dequeue_task_idle) from [<8004f028>] (dequeue_task+0x30/0x50) r4:bf7dff40 r3:80055ec0 [<8004eff8>] (dequeue_task) from [<800503c0>] (deactivate_task+0x30/0x34) r4:bf7dff40 [<80050390>] (deactivate_task) from [<8064d8e4>] (__schedule+0x2c8/0x5c0) [<8064d61c>] (__schedule) from [<8064dc14>] (schedule+0x38/0x88) r10:80912964 r9:808c1e50 r8:808c0038 r7:808cbf30 r6:80e128ec r5:60000093 r4:80912968 [<8064dbdc>] (schedule) from [<8064dfec>] (schedule_preempt_disabled+0x10/0x14) [<8064dfdc>] (schedule_preempt_disabled) from [<8064ebc0>] (mutex_lock_nested+0x1c0/0x3c0) [<8064ea00>] (mutex_lock_nested) from [<804ae71c>] (clk_prepare_lock+0x44/0xe4) r10:806554cc r9:bf7df1bc r8:808cf4f8 r7:808cf544 r6:bf7df1b8 r5:808c0010 r4:80e69750 [<804ae6d8>] (clk_prepare_lock) from [<804af214>] (clk_get_rate+0x14/0x64) r6:bf7df1b8 r5:00000002 r4:bf017000 r3:80922ad0 [<804af200>] (clk_get_rate) from [<80025d30>] (imx6sl_set_wait_clk+0x18/0x20) r5:00000002 r4:00000001 [<80025d18>] (imx6sl_set_wait_clk) from [<80023454>] (imx6sl_enter_wait+0x20/0x48) [<80023434>] (imx6sl_enter_wait) from [<80477c24>] (cpuidle_enter_state+0x44/0xfc) r4:3c386e48 r3:80023434 [<80477be0>] (cpuidle_enter_state) from [<80477dd8>] (cpuidle_idle_call+0xfc/0x160) r8:808cf4f8 r7:00000001 r6:80e69534 r5:00000000 r4:bf7df1b8 [<80477cdc>] (cpuidle_idle_call) from [<8000f61c>] (arch_cpu_idle+0x10/0x50) r9:808c0000 r8:00000000 r7:80921a89 r6:808c8938 r5:808c899c r4:808c0000 [<8000f60c>] (arch_cpu_idle) from [<8006fa94>] (cpu_startup_entry+0x108/0x160) [<8006f98c>] (cpu_startup_entry) from [<806452ac>] (rest_init+0xb4/0xdc) r7:808afae0 [<806451f8>] (rest_init) from [<8086fb58>] (start_kernel+0x328/0x38c) r6:ffffffff r5:808c8880 r4:808c8a30 [<8086f830>] (start_kernel) from [<80008074>] (0x80008074) Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx6q: support ptp and rmii clock from padShawn Guo2014-03-052-1/+36
| | | | | | | | | | | | On imx6qdl, the ENET RMII and PTP clock can come from either internal ANATOP/CCM or external clock source through pad GPIO_16. But in case of the external clock source, bit IOMUXC_GPR1[21] needs to be cleared. The patch adds the support for systems that use an external clock source and distinguishes above two cases by checking if the PTP clock specified in device tree is the one coming from the internal ANATOP/CCM. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx6q: remove unneeded clk lookupsShawn Guo2014-03-051-6/+0
| | | | | | | | | | | Since commit (a94f8ec ARM: imx6q: remove board specific CLKO setup), a number of clk lookups in imx6q clock driver is no longer needed. Let's remove them. The cpu0 lookup is also removed since we are now running imx6 cpufreq driver and looking up clocks from device tree. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx_v6_v7_defconfig: Select CONFIG_MMC_UNSAFE_RESUMEFabio Estevam2014-03-051-0/+1
| | | | | | | | | | | PM subsystem treats mmc card as removed during suspend. If MMC is used to store the root file system, it is better to tell the kernel not to treat it as a removable media, so select CONFIG_MMC_UNSAFE_RESUME for such purpose. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx_v4_v5_defconfig: Select CONFIG_MMC_UNSAFE_RESUMEFabio Estevam2014-03-051-0/+1
| | | | | | | | | | | PM subsystem treats mmc card as removed during suspend. If MMC is used to store the root file system, it is better to tell the kernel not to treat it as a removable media, so select CONFIG_MMC_UNSAFE_RESUME for such purpose. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx: enable delaytimer on the imx timerSebastian Andrzej Siewior2014-03-051-0/+12
| | | | | | | | The imx can support timer-based delays, so implement this. Skips past jiffy calibration. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx: add always-on clock array for i.mx6sl to maintain correct usecountAnson Huang2014-03-051-0/+11
| | | | | | | | | | IPG, ARM and MMDC's clock should be enabled during kernel boot up, so we need to maintain their usecount, otherwise, they may be disabled unexpectedly if their children's clock are turned off, and caused their parent PLLs also get disabled, which is incorrect. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx: add suspend in ocram support for i.mx6slAnson Huang2014-03-053-4/+61
| | | | | | | | | i.MX6SL's suspend in ocram function is derived from i.MX6Q, it can lower the DDR IO power from ~10mA@1.2V to ~1mA@1.2V, measured on i.MX6SL EVK board, SH5. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx: add suspend in ocram support for i.mx6dlAnson Huang2014-03-051-1/+23
| | | | | | | | | i.MX6DL's suspend in ocram function is derived from i.MX6Q, it can lower the DDR IO power from ~26mA@1.5V to ~15mA@1.5V, measured on i.MX6DL SabreSD board, R25. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx: add suspend in ocram support for i.mx6qAnson Huang2014-03-057-11/+577
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When system enter suspend, we can set the DDR IO to high-Z state to save DDR IOs' power consumption, this operation can save many power(from ~26mA@1.5V to ~15mA@1.5V, measured on i.MX6Q SabreSD board, R25) of DDR IOs. To achieve that, we need to copy the suspend code to ocram and run the low level hardware related code(set DDR IOs to high-Z state) in ocram. If there is no ocram space available, then system will still do suspend in external DDR, hence no DDR IOs will be set to high-Z. The OCRAM usage layout is as below, ocram suspend region(4K currently): ======================== high address ====================== . . . ^ ^ ^ imx6_suspend code PM_INFO structure(imx6_cpu_pm_info) ======================== low address ======================= Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM i.MX: remove PWM platform supportSascha Hauer2014-03-0510-102/+0
| | | | | | | | As the i.MX pwm driver is devicetree only, remove the platform support for this device. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx: clk-vf610: Suppress duplicate const sparse warningLiu Ying2014-03-051-18/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There should be no duplicate const specifiers for those static constant character string arrays defined for clock mux options. Also, the arrays are only taken as the 5th argument for the imx_clk_mux() function, which is in the type of 'const char **parents'. So, let's remove the 2nd const specifier right after 'char'. This patch fixes these sparse warnings: arch/arm/mach-imx/clk-vf610.c:66:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:67:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:68:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:69:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:70:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:71:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:72:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:73:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:74:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:75:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:76:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:77:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:78:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:79:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:80:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:81:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:83:25: warning: duplicate const arch/arm/mach-imx/clk-vf610.c:84:25: warning: duplicate const Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx: clk-imx6sl: Suppress duplicate const sparse warningLiu Ying2014-03-051-21/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There should be no duplicate const specifiers for those static constant character string arrays defined for clock mux options. Also, the arrays are only taken as the 5th argument for the imx_clk_mux() function, which is in the type of 'const char **parents'. So, let's remove the 2nd const specifier right after 'char'. This patch fixes these sparse warnings: arch/arm/mach-imx/clk-imx6sl.c:21:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:22:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:23:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:24:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:25:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:26:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:27:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:28:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:29:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:30:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:31:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:32:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:33:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:34:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:35:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:36:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:37:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:38:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:39:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:40:25: warning: duplicate const arch/arm/mach-imx/clk-imx6sl.c:41:25: warning: duplicate const Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx: add select on ARCH_MXC for cpufreq supportJohn Tobias2014-03-051-3/+3
| | | | | | | | Move ARCH_HAS_CPUFREQ, ARCH_HAS_OPP and PM_OPP on ARCH_MXC so that the user can enable the cpufreq support for iMX6Q and/or iMX6SL. Signed-off-by: John Tobias <john.tobias.ph@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx_v6_v7_defconfig: Enable some drivers used on the cpuimx35.Denis Carikli2014-03-051-0/+2
| | | | | | | | | | | | | | The eukrea cpuimx35 has a pcf8563 RTC and a LCD gpio regulator. We enable the respective drivers in order to be able to use theses features with this configuration. Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM i.MX35: build in pinctrl support.Denis Carikli2014-03-051-1/+1
| | | | | | | | | | | | | | | | | | | | shawn.guo: While at it, we drop 'select PINCTRL' from SOC_IMX35, since it's been covered by ARCH_MXC. Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King <linux@arm.linux.org.uk> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx_v6_v7_defconfig: Enable backlight gpio support.Denis Carikli2014-03-051-0/+1
| | | | | | | | | | | | The eukrea mbimxsd51 has a gpio backlight for its LCD display, so we turn that driver on. Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx: add cpuidle support for i.mx6slAnson Huang2014-03-056-0/+93
| | | | | | | | | | | | | | | | | | Add cpuidle support for i.MX6SL, currently only support two cpuidle levels(ARM wfi and WAIT mode), and add software workaround for WAIT mode errata as below: ERR005311 CCM: After exit from WAIT mode, unwanted interrupt(s) taken during WAIT mode entry process could cause cache memory corruption. Software workaround: To prevent this issue from occurring, software should ensure that the ARM to IPG clock ratio is less than 12:5 (that is < 2.4x), before entering WAIT mode. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx: AHB rate must be set to 132MHz on i.mx6slAnson Huang2014-03-051-1/+8
| | | | | | | | | | The reset value of AHB divider is 3, so current AHB rate is 99MHz which is not correct for kernel, need to ensure AHB rate is 132MHz in clk driver, as ipg is sourcing from AHB, and it should be 66MHz by default. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx: Use INT_MEM_CLK_LPM as the bit nameFabio Estevam2014-03-053-6/+6
| | | | | | | | Bit 17 of register CCM_CGPR is called INT_MEM_CLK_LPM as per the mx6 reference manual, so use this name instead. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx_v6_v7_defconfig: Select PCI supportFabio Estevam2014-03-051-0/+2
| | | | | | | | Let PCI driver be enabled by default. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* Merge tag 'kconfig-cleanup-for-3.15' into imx/socShawn Guo2014-03-0533-228/+12
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | - Remove common kconfig options required by multi-platform builds out of individual platforms as they are redundant. - Make SMP, CACHE_L2X0 and GPIO config options user visible on multi-platform builds as most platforms enable these options and all platforms can run with them enabled. - Make multi-platform v6 default to more optimal v6k rather than v6 - Remove the last bit of mach-virt and convert it to just a kconfig option. Conflicts: arch/arm/mach-omap2/Kconfig
| * ARM: virt: select ARM_AMBARob Herring2014-02-191-1/+2
| | | | | | | | | | | | | | | | Guests can use AMBA bus devices such as the PL011 uart, so enable the AMBA bus for mach-virt. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Russell King <linux@arm.linux.org.uk>
| * ARM: virt: make mach-virt just a kconfig optionRob Herring2014-02-195-55/+6
| | | | | | | | | | | | | | | | | | The mach code for mach-virt is no longer needed, so we can remove all of mach-virt except the kconfig entry. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
| * ARM: vt8500: enable V6K instead of plain V6Rob Herring2014-02-191-1/+0
| | | | | | | | | | | | | | | | | | The wm8750 is an ARM1176 which has all the V6K extensions except for SMP, so V6K should be selected instead. Dropping the select will use the default for ARCH_MULTI_V6 which is V6K. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Tony Prisk <linux@prisktech.co.nz>
| * ARM: cns3xxx: enable V6K instead of plain V6Rob Herring2014-02-191-1/+0
| | | | | | | | | | | | | | | | | | The cns3xxx is an ARM11MPCore which has all the V6K extensions, so V6K should be selected instead. Dropping the select will use the default for ARCH_MULTI_V6 which is V6K. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Anton Vorontsov <anton@enomsg.org>
| * ARM: bcm2835: enable V6K instead of plain V6Rob Herring2014-02-191-1/+0
| | | | | | | | | | | | | | | | | | The bcm2835 is an ARM1176 which has all the V6K extensions except for SMP, so V6K should be selected instead. Dropping the select will use the default for ARCH_MULTI_V6 which is V6K. Signed-off-by: Rob Herring <robh@kernel.org> Tested-by: Stephen Warren <swarren@wwwdotorg.org>
| * ARM: Select V6K instead of V6 by default for multi-platformRob Herring2014-02-194-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | MULTI_V6 should default to V6K as it is more optimal than V6. Any platform which is not V6K should select CPU_V6 which will enable the less optimal code paths. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Anton Vorontsov <anton@enomsg.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jamie Iles <jamie@jamieiles.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
| * ARM: select MIGHT_HAVE_CACHE_L2X0 for V6 and V7 multi-platformRob Herring2014-02-1911-10/+1
| | | | | | | | | | | | | | | | | | | | Many V6 and V7 platforms have an L2x0 cache, so make CONFIG_MIGHT_HAVE_CACHE_L2X0 visible for V6 and V7 multi-platform builds. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
| * ARM: select HAVE_SMP for V7 multi-platformRob Herring2014-02-1919-19/+1
| | | | | | | | | | | | | | | | | | All V7 platforms can run SMP kernels, so make CONFIG_SMP visible for V7 multi-platform builds. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
| * ARM: centralize common multi-platform kconfig optionsRob Herring2014-02-1930-138/+2
| | | | | | | | | | | | | | | | | | | | | | | | Multi-platform requires various kconfig options to be selected, so platforms don't need to select them individually. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
* | Linux 3.14-rc4v3.14-rc4Linus Torvalds2014-02-231-1/+1
| |
* | Merge tag 'fixes-for-linus' of ↵Linus Torvalds2014-02-2326-48/+108
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A collection of fixes for ARM platforms. Most are fixes for DTS files, mostly from DT conversion on OMAP which is still finding a few issues here and there. There's a couple of small stale code removal patches that we usually queue for the next release instead, but they seemed harmless enough to bring in now. Also, a fix for backlight on some PXA platforms, and a cache configuration fix for Tegra, etc" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits) MAINTAINERS: add additional ARM BCM281xx/BCM11xxx maintainer ARM: tegra: only run PL310 init on systems with one ARM: tegra: Add head numbers to display controllers ARM: imx6: build pm-imx6q.c independently of CONFIG_PM ARM: tegra: fix RTC0 alias for Cardhu ARM: dove: dt: revert PMU interrupt controller node Documentation: dt: OMAP: Update Overo/Tobi ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi ARM: dts: omap3-tobi: Use the correct vendor prefix ARM: dts: omap3-tobi: Fix boot with OMAP36xx-based Overo ARM: OMAP2+: Remove legacy macros for zoom platforms ARM: OMAP2+: Remove MACH_NOKIA_N800 ARM: dts: N900: add missing compatible property ARM: dts: N9/N950: fix boot hang with 3.14-rc1 ARM: OMAP1: nokia770: enable tahvo-usb ARM: OMAP2+: gpmc: fix: DT ONENAND child nodes not probed when MTD_ONENAND is built as module ARM: OMAP2+: gpmc: fix: DT NAND child nodes not probed when MTD_NAND is built as module ARM: dts: omap3-gta04: Fix mmc1 properties. ARM: dts: omap3-gta04: Fix 'aux' gpio key flags. ARM: OMAP2+: add missing ARCH_HAS_OPP ...
| * | MAINTAINERS: add additional ARM BCM281xx/BCM11xxx maintainerMatt Porter2014-02-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add myself as an additional maintainer for the Broadcom mobile SoCs. Signed-off-by: Matt Porter <mporter@linaro.org> Acked-by: Christian Daudt <bcm@fixthebug.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | ARM: tegra: only run PL310 init on systems with oneStephen Warren2014-02-181-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix tegra_init_cache() to check whether the system has a PL310 cache before touching the PL310 registers. This prevents access to non-existent registers on Tegra114 and later. Note for stable kernels: In <= v3.12, the file to patch is arch/arm/mach-tegra/common.c. Cc: <stable@vger.kernel.org> # v3.9+ Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | ARM: tegra: Add head numbers to display controllersThierry Reding2014-02-183-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The number of the head specifies the index of the display controller unit and is required to properly configure outputs so that they receive video data from the correct source. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | Merge tag 'mvebu-dt-fixes-3.14' of git://git.infradead.org/linux-mvebu into ↵Olof Johansson2014-02-182-12/+2
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fixes mvebu dt fixes for v3.14 - mvebu: add missing 'eth3' alias for mv78260 - dove: revert PMU interrupt controller node, wait for driver to land. * tag 'mvebu-dt-fixes-3.14' of git://git.infradead.org/linux-mvebu: ARM: dove: dt: revert PMU interrupt controller node ARM: mvebu: dt: add missing alias 'eth3' on Armada XP mv78260 Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | ARM: dove: dt: revert PMU interrupt controller nodeJason Cooper2014-02-181-11/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The corresponding driver didn't make it into v3.14, so we need to remove the node. Dove systems fail to boot with the node present and no driver. This node will be re-added when the driver makes it to mainline. Reported-by: Jean-Francois Moine <moinejf@free.fr> Tested-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| | * | ARM: mvebu: dt: add missing alias 'eth3' on Armada XP mv78260Willy Tarreau2014-02-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was correctly set on mv78460 but not on mv78260, resulting in my OpenBlocks AX3-4 retrieving only 3 of its 4 MAC addresses from the boot loader. Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| * | | ARM: imx6: build pm-imx6q.c independently of CONFIG_PMShawn Guo2014-02-182-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When building a kernel image with only CONFIG_CPU_IDLE but no CONFIG_PM, we will get the following link error. LD init/built-in.o arch/arm/mach-imx/built-in.o: In function `imx6q_enter_wait': platform-spi_imx.c:(.text+0x25c0): undefined reference to `imx6q_set_lpm' platform-spi_imx.c:(.text+0x25d4): undefined reference to `imx6q_set_lpm' arch/arm/mach-imx/built-in.o: In function `imx6q_cpuidle_init': platform-spi_imx.c:(.init.text+0x75d4): undefined reference to `imx6q_set_chicken_bit' make[1]: *** [vmlinux] Error 1 Since pm-imx6q.c has been a collection of library functions that access CCM low-power registers used by not only suspend but also cpuidle and other drivers, let's build pm-imx6q.c independently of CONFIG_PM to fix above error. Reported-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: stable@vger.kernel.org Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | Merge tag 'omap-for-v3.14/fixes-against-rc1' of ↵Olof Johansson2014-02-1815-30/+72
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps, mostly to deal with the 34xx vs 36xx SoC configuration for overo boards. * tag 'omap-for-v3.14/fixes-against-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: Documentation: dt: OMAP: Update Overo/Tobi ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/Tobi ARM: dts: omap3-tobi: Use the correct vendor prefix ARM: dts: omap3-tobi: Fix boot with OMAP36xx-based Overo ARM: OMAP2+: Remove legacy macros for zoom platforms ARM: OMAP2+: Remove MACH_NOKIA_N800 ARM: dts: N900: add missing compatible property ARM: dts: N9/N950: fix boot hang with 3.14-rc1 ARM: OMAP1: nokia770: enable tahvo-usb ARM: OMAP2+: gpmc: fix: DT ONENAND child nodes not probed when MTD_ONENAND is built as module ARM: OMAP2+: gpmc: fix: DT NAND child nodes not probed when MTD_NAND is built as module ARM: dts: omap3-gta04: Fix mmc1 properties. ARM: dts: omap3-gta04: Fix 'aux' gpio key flags. ARM: OMAP2+: add missing ARCH_HAS_OPP ARM: dts: am335x-evmsk: Fix mmc1 support ARM: DTS: am335x-evmsk: Correct audio clock frequency ARM: dts: omap3-gta04: Add EOC irq gpio line handling. Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | Documentation: dt: OMAP: Update Overo/TobiFlorian Vaussard2014-02-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the compatible string for Overo/Tobi to reflect the latest changes. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | ARM: dts: Add support for both OMAP35xx and OMAP36xx Overo/TobiFlorian Vaussard2014-02-134-7/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Unfortunatly the device tree for older OMAP35xx Overo cannot be used with newer OMAP36xx and vice-versa. To address this issue, move most of the Tobi DTS to a common include file, and create model-specific Tobi DTS. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Kevin Hilman <khilman@linaro.org> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | ARM: dts: omap3-tobi: Use the correct vendor prefixFlorian Vaussard2014-02-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Gumstix is the correct vendor for all Overo related products. Reported-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | ARM: dts: omap3-tobi: Fix boot with OMAP36xx-based OveroFlorian Vaussard2014-02-132-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tobi expansion board can be used with both OMAP35xx-based Overo, and OMAP36xx-based Overo. Currently the boot is broken with newer OMAP36xx-based Overo (Storm and alike). Fix include file and compatible string to be able to boot newer models. This will break older models. This will be addressed later. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Kevin Hilman <khilman@linaro.org> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-22 00:51:39 +0000