summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* [MIPS] Update defconfigs to 2.6.18-rc1.Ralf Baechle2006-07-1348-877/+2360
|
* [MIPS] IP27: Don't destroy interrupt routing information on shutdown irq.Ralf Baechle2006-07-131-2/+0
| | | | | | | This fixes the "not syncing: Could not identify cpu/level ..." panic when a PCI irq is requested the second time. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [MIPS] Avoid interprocessor function calls.Ralf Baechle2006-07-131-5/+30
| | | | | | | | On the 34K where multiple virtual processors are implemented in a single core and share a single TLB, interprocessor function calls are not needed to flush a cache, so avoid them. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* [PATCH] lockdep: annotate mm/slab.cArjan van de Ven2006-07-131-0/+32
| | | | | | | | | | | | | mm/slab.c uses nested locking when dealing with 'off-slab' caches, in that case it allocates the slab header from the (on-slab) kmalloc caches. Teach the lock validator about this by putting all on-slab caches into a separate class. this patch has no effect on non-lockdep kernels. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] lockdep: undo mm/slab.c annotationIngo Molnar2006-07-131-23/+10
| | | | | | | | | undo existing mm/slab.c lock-validator annotations, in preparation of a new, less intrusive annotation patch. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge commit master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 of HEADLinus Torvalds2006-07-136-231/+383
|\ | | | | | | | | | | | | | | | | | | | | * HEAD: [SPARC]: Fix OF register translations under sub-PCI busses. [SPARC64]: Refine Sabre wsync logic. [SERIAL] sunsu: Handle keyboard and mouse ports directly. [SPARC64]: Fix 2 bugs in sabre_irq_build() [SPARC64]: Update defconfig. [SPARC64]: Fix make headers_install [SPARC64]: of_device_register() error checking fix
| * [SPARC]: Fix OF register translations under sub-PCI busses.David S. Miller2006-07-132-204/+271
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is an implicit assumption in the code that ranges will translate to something that can fit in 2 32-bit cells, or a 64-bit value. For certain kinds of things below PCI this isn't necessarily true. Here is what the relevant OF device hierarchy looks like for one of the serial controllers on an Ultra5: Node 0xf005f1e0 ranges: 00000000.00000000.00000000.000001fe.01000000.00000000.01000000 01000000.00000000.00000000.000001fe.02000000.00000000.01000000 02000000.00000000.00000000.000001ff.00000000.00000001.00000000 03000000.00000000.00000000.000001ff.00000000.00000001.00000000 device_type: 'pci' model: 'SUNW,sabre' Node 0xf005f9d4 device_type: 'pci' model: 'SUNW,simba' Node 0xf0060d24 ranges: 00000010.00000000 82010810.00000000.f0000000 01000000 00000014.00000000 82010814.00000000.f1000000 00800000 name: 'ebus' Node 0xf0062dac reg: 00000014.003083f8.00000008 --> 0x1ff.f13083f8 device_type: 'serial' name: 'su' So the correct translation here is: 1) Match "su" register to second ranges entry of 'ebus', which translates into a PCI triplet "82010814.00000000.f1000000" of size 00800000, which gives us "82010814.00000000.f13083f8". 2) Pass-through "SUNW,simba" since it lacks ranges property 3) Match "82010814.00000000.f13083f8" to third ranges property of PCI controller node 'SUNW,sabre', and we arrive at the final physical MMIO address of "0x1fff13083f8". Due to the 2-cell assumption, we couldn't translate to a PCI 3-cell value, and we couldn't perform a pass-thru on it either. It was easiest to just stop splitting the ranges application operation between two methods, ->map and ->translate, and just let ->map do all the work. That way it would work purely on 32-bit cell arrays instead of having to "return" some value like a u64. It's still not %100 correct because the out-of-range check is still done using the 64 least significant bits of the range and address. But it does work for all the cases I've thrown at it so far. Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC64]: Refine Sabre wsync logic.David S. Miller2006-07-131-8/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | It is only needed when there is a PCI-PCI bridge sitting between the device and the PCI host controller which is not a Simba APB bridge. Add logic to handle two special cases: 1) device behind EBUS, which sits on PCI 2) PCI controller interrupts Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SERIAL] sunsu: Handle keyboard and mouse ports directly.David S. Miller2006-07-131-9/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sunsu_ports[] array exists merely to be able to easily use an integer index to get at the proper serial console port struct. We size this only for real ports, not for the keyboard and mouse, and thus keyboard and mouse port registration would fail. Fix this by dynamically allocating the port struct for the keyboard and mouse, instead of using the sunsu_ports[] array. Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC64]: Fix 2 bugs in sabre_irq_build()David S. Miller2006-07-131-4/+26
| | | | | | | | | | | | | | | | | | | | | | When installing the IRQ pre-handler, we were not setting up the second argument correctly. It should be a pointer to the sabre_irq_data, not the config space PIO address. Furthermore, we only need this pre-handler installed if the device sits behind a PCI bridge that is not Sabre or Simba/APB. Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC64]: Update defconfig.David S. Miller2006-07-131-8/+31
| | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC64]: Fix make headers_installDavid Woodhouse2006-07-131-1/+1
| | | | | | | | | | | | | | | | | | | | A minor typo in the include/asm-sparc64/Kbuild file prevents the make headers_install from building a useful tree of kernel headers for sparc64. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Tom "spot" Callaway <tcallawa@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC64]: of_device_register() error checking fixAndrew Morton2006-07-132-4/+8
| | | | | | | | | | | | | | | | | | | | device_create_file() can fail. This causes the sparc64 compile to fail when my fanatical __must_check patch is applied, due to -Werror. [ Added necessary identical fix for sparc32. -DaveM] Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | [PATCH] m68knommu: fix result type in get_user() macroGreg Ungerer2006-07-131-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | Keep the result holder variable the same type as the quantity we are retreiving in the get_user() macro - don't go through a pointer version of the user space address type. Using the address type causes problems if the address type was const (newer versions of gcc quite rightly error out for that condition). Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] i386: system.h: remove extra semicolons and fix orderChuck Ebbert2006-07-131-11/+10
|/ | | | | | | | | | | include/asm-i386/system.h has trailing semicolons in some of the macros that cause legitimate code to fail compilation, so remove them. Also remove extra blank lines within one group of macros. And put stts() and clts() back together; they got separated somehow. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge commit master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 of HEADLinus Torvalds2006-07-1232-158/+206
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * HEAD: [NET]: fix __sk_stream_mem_reclaim [Bluetooth] Fix deadlock in the L2CAP layer [Bluetooth] Let BT_HIDP depend on INPUT [Bluetooth] Avoid NULL pointer dereference with tty->driver [Bluetooth] Remaining transitions to use kzalloc() [WAN]: converting generic HDLC to use netif_dormant*() [IPV4]: Fix error handling for fib_insert_node call [NETROM] lockdep: fix false positive [ROSE] lockdep: fix false positive [AX.25]: Optimize AX.25 socket list lock [IPCOMP]: Fix truesize after decompression [IPV6]: Use ipv6_addr_src_scope for link address sorting. [TCP] tcp_highspeed: Fix AI updates. [MAINTAINERS]: Add proper entry for TC classifier [NETROM]: Drop lock before calling nr_destroy_socket [NETROM]: Fix locking order when establishing a NETROM circuit. [AX.25]: Fix locking of ax25 protocol function list. [IPV6]: order addresses by scope
| * [NET]: fix __sk_stream_mem_reclaimIan McDonald2006-07-121-9/+7
| | | | | | | | | | | | | | | | | | | | | | __sk_stream_mem_reclaim is only called by sk_stream_mem_reclaim. As such the check on sk->sk_forward_alloc is not needed and can be removed. Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [Bluetooth] Fix deadlock in the L2CAP layerMarcel Holtmann2006-07-121-9/+9
| | | | | | | | | | | | | | | | | | | | | | The Bluetooth L2CAP layer has 2 locks that are used in softirq context, (one spinlock and one rwlock, where the softirq usage is readlock) but where not all usages of the lock were _bh safe. The patch below corrects this. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
| * [Bluetooth] Let BT_HIDP depend on INPUTMarcel Holtmann2006-07-121-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch lets BT_HIDP depend on instead of select INPUT. This fixes the following warning during an s390 build: net/bluetooth/hidp/Kconfig:4:warning: 'select' used by config symbol 'BT_HIDP' refer to undefined symbol 'INPUT' A dependency on INPUT also implies !S390 (and therefore makes the explicit dependency obsolete) since INPUT is not available on s390. The practical difference should be nearly zero, since INPUT is always set to y unless EMBEDDED=y (or S390=y). Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
| * [Bluetooth] Avoid NULL pointer dereference with tty->driverMarcel Holtmann2006-07-121-2/+2
| | | | | | | | | | | | This patch checks for tty->driver before trying to call flush_buffer(). Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
| * [Bluetooth] Remaining transitions to use kzalloc()Marcel Holtmann2006-07-127-25/+16
| | | | | | | | | | | | This patch makes the remaining transitions to use kzalloc(). Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
| * [WAN]: converting generic HDLC to use netif_dormant*()Krzysztof Halasa2006-07-127-70/+82
| | | | | | | | | | | | | | | | | | | | This patch converts generic HDLC (and WAN drivers using it) from hdlc_set_carrier() to netif_dormant*() interface. WAN hardware drivers should now use netif_carrier_on|off() like other network drivers. Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [IPV4]: Fix error handling for fib_insert_node callHerbert Xu2006-07-121-1/+1
| | | | | | | | | | | | | | | | The error handling around fib_insert_node was broken because we always zeroed the error before checking it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [NETROM] lockdep: fix false positiveRalf Baechle2006-07-121-0/+9
| | | | | | | | | | | | | | | | | | | | NETROM network devices are virtual network devices encapsulating NETROM frames into AX.25 which will be sent through an AX.25 device, so form a special "super class" of normal net devices; split their locks off into a separate class since they always nest. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [ROSE] lockdep: fix false positiveRalf Baechle2006-07-121-0/+9
| | | | | | | | | | | | | | | | | | | | ROSE network devices are virtual network devices encapsulating ROSE frames into AX.25 which will be sent through an AX.25 device, so form a special "super class" of normal net devices; split their locks off into a separate class since they always nest. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [AX.25]: Optimize AX.25 socket list lockRalf Baechle2006-07-123-13/+13
| | | | | | | | | | | | | | | | Right now all uses of the ax25_list_lock lock are _bh locks but knowing some code is only ever getting invoked from _bh context we can better. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [IPCOMP]: Fix truesize after decompressionHerbert Xu2006-07-122-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The truesize check has uncovered the fact that we forgot to update truesize after pskb_expand_head. Unfortunately pskb_expand_head can't update it for us because it's used in all sorts of different contexts, some of which would not allow truesize to be updated by itself. So the solution for now is to simply update it in IPComp. This patch also changes skb_put to __skb_put since we've just expanded tailroom by exactly that amount so we know it's there (but gcc does not). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [IPV6]: Use ipv6_addr_src_scope for link address sorting.YOSHIFUJI Hideaki2006-07-121-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the source address selection, the address must be sorted from global to node-local. But, ifp->scope is different from the scope for source address selection. 2001::1 fe80::1 ::1 ifp->scope 0 0x02 0x01 ipv6_addr_src_scope(&ifp->addr) 0x0e 0x02 0x01 So, we need to use ipv6_addr_src_scope(&ifp->addr) for sorting. And, for backward compatibility, addresses should be sorted from new one to old one. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [TCP] tcp_highspeed: Fix AI updates.Xiaoliang (David) Wei2006-07-121-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I think there is still a problem with the AIMD parameter update in HighSpeed TCP code. Line 125~138 of the code (net/ipv4/tcp_highspeed.c): /* Update AIMD parameters */ if (tp->snd_cwnd > hstcp_aimd_vals[ca->ai].cwnd) { while (tp->snd_cwnd > hstcp_aimd_vals[ca->ai].cwnd && ca->ai < HSTCP_AIMD_MAX - 1) ca->ai++; } else if (tp->snd_cwnd < hstcp_aimd_vals[ca->ai].cwnd) { while (tp->snd_cwnd > hstcp_aimd_vals[ca->ai].cwnd && ca->ai > 0) ca->ai--; In fact, the second part (decreasing ca->ai) never decreases since the while loop's inequality is in the reverse direction. This leads to unfairness with multiple flows (once a flow happens to enjoy a higher ca->ai, it keeps enjoying that even its cwnd decreases) Here is a tentative fix (I also added a comment, trying to keep the change clear): Acked-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [MAINTAINERS]: Add proper entry for TC classifierStephen Hemminger2006-07-122-2/+6
| | | | | | | | | | Acked-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [NETROM]: Drop lock before calling nr_destroy_socketRalf Baechle2006-07-121-1/+1
| | | | | | | | | | | | | | | | nr_destroy_socket takes the socket lock itself so it should better be called with the socket unlocked. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [NETROM]: Fix locking order when establishing a NETROM circuit.Ralf Baechle2006-07-121-6/+6
| | | | | | | | | | | | | | | | | | | | When establishing a new circuit in nr_rx_frame the locks are taken in a different order than in the rest of the stack. This should be harmless but triggers lockdep. Either way, reordering the code a little solves the issue. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [AX.25]: Fix locking of ax25 protocol function list.Ralf Baechle2006-07-121-9/+9
| | | | | | | | | | | | | | | | Delivery of AX.25 frame to the layer 3 protocols happens in softirq context so locking needs to be bh-proof. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [IPV6]: order addresses by scopeBrian Haley2006-07-121-3/+21
| | | | | | | | | | | | | | | | | | | | If IPv6 addresses are ordered by scope, then ipv6_dev_get_saddr() can break-out of the device addr_list for() loop when the candidate source address scope is less than the destination address scope. Signed-off-by: Brian Haley <brian.haley@hp.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge commit master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6 of HEADLinus Torvalds2006-07-1217-51/+118
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * HEAD: [PATCH] hwmon: Documentation update for abituguru [PATCH] hwmon: Fix for first generation Abit uGuru chips [PATCH] hwmon: New maintainer for w83791d [PATCH] pca9539: Honor the force parameter [PATCH] i2c-algo-bit: Wipe out dead code [PATCH] i2c: Handle i2c_add_adapter failure in i2c algorithm drivers [PATCH] i2c: New mailing list [PATCH] i2c-ite: Plan for removal [PATCH] i2c-powermac: Fix master_xfer return value [PATCH] scx200_acb: Fix the block transactions [PATCH] scx200_acb: Fix the state machine [PATCH] i2c-iop3xx: Avoid addressing self [PATCH] i2c: Fix 'ignore' module parameter handling in i2c-core
| * | [PATCH] hwmon: Documentation update for abituguruHans de Goede2006-07-121-2/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Documentation update for the new bank1_types module param. Also add what we know about different revisions of the uGuru and a note that the abituguru driver unfortunatly does not work with the latest and greatest motherboards, which have what I think is revision 4 of the uGuru. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | [PATCH] hwmon: Fix for first generation Abit uGuru chipsHans de Goede2006-07-121-2/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the abituguru driver is seeing some more widespread testing it has turned out that one the first generation of Abit uGuru motherboards, with uGuru revision 1, the autodetect bank1 sensor type code doesn't (always) work. This patch adds a module param to override the autodetect, and it adds validity checks for the value of the 2 other autodetection override module params. An example of howto use the new param can be found here: http://lm-sensors.org/wiki/Configurations/Abit/AN7 Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | [PATCH] hwmon: New maintainer for w83791dCharles Spirakis2006-07-121-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add Charles Spirakis as the maintainer for the w83791d sensor chip driver. Signed-off-by: Charles Spirakis <bezaur@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | [PATCH] pca9539: Honor the force parameterBen Gardner2006-07-121-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | The pca9539 driver doesn't honor the force parameter; it always does detection. This patch will skip detection if forced. Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | [PATCH] i2c-algo-bit: Wipe out dead codeUwe Bugla2006-07-121-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | i2c-algo-bit: Wipe out dead code Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | [PATCH] i2c: Handle i2c_add_adapter failure in i2c algorithm driversMark M. Hoffman2006-07-125-14/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Content-Disposition: inline; filename=i2c-algo-error-handling-fix.patch It is possible for i2c_add_adapter() to fail. Several I2C algorithm drivers ignore that fact. This (compile-tested only) patch fixes them. Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | [PATCH] i2c: New mailing listJean Delvare2006-07-122-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | We have a new mailing list dedicated to linux i2c: http://lists.lm-sensors.org/mailman/listinfo/i2c Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | [PATCH] i2c-ite: Plan for removalJean Delvare2006-07-121-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Plan the i2c-ite and i2c-algo-ite drivers for removal. These drivers never compiled since they were added to the kernel tree 5 years ago. Also see: http://marc.theaimsgroup.com/?l=linux-mips&m=115040510817448 Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | [PATCH] i2c-powermac: Fix master_xfer return valueJean Delvare2006-07-122-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the value returned by the i2c-powermac's master_xfer method. It should return the number of messages processed successfully, but instead returns the number of data bytes in the first (and only) processed message. Also explicitly mention the master_xfer convention so that future implementations get it right directly. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | [PATCH] scx200_acb: Fix the block transactionsJean Delvare2006-07-121-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The scx200_acb i2c bus driver pretends to support SMBus block transactions, but in fact it implements the more simple I2C block transactions. Additionally, it lacks sanity checks on the length of the block transactions, which could lead to a buffer overrun. This fixes an oops reported by Alexander Atanasov: http://marc.theaimsgroup.com/?l=linux-kernel&m=114970382125094 Thanks to Ben Gardner for fixing my bugs :) Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | [PATCH] scx200_acb: Fix the state machineThomas Andrews2006-07-121-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the scx200_acb state machine: * Nack was sent one byte too late on reads >= 2 bytes. * Stop bit was set one byte too late on reads. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | [PATCH] i2c-iop3xx: Avoid addressing selfPeter Milne2006-07-122-8/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Avoid addressing self when sending a slave address. Follows instruction in Intel 80331/80321 manuals. Ignoring this worked previously on 80321, but causes a hang on i2cdetect on 80331. Signed-off-by: Peter Milne <peter.milne@d-tacq.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | [PATCH] i2c: Fix 'ignore' module parameter handling in i2c-coreMark M. Hoffman2006-07-121-2/+2
| |/ | | | | | | | | | | | | | | | | This patch fixes a bug in the handling of 'ignore' module parameters of I2C client drivers. Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | Merge commit master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6 ↵Linus Torvalds2006-07-127-72/+19
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | of HEAD * HEAD: [PATCH] The scheduled unexport of insert_resource [PATCH] remove kernel/power/pm.c:pm_unregister_all() [PATCH] Driver core: bus.c cleanups [PATCH] Driver core: kernel-doc in drivers/base/core.c corrections [PATCH] Driver core: fix driver-core kernel-doc
| * | [PATCH] The scheduled unexport of insert_resourceAdrian Bunk2006-07-123-11/+1
| | | | | | | | | | | | | | | | | | | | | | | | Implement the scheduled unexport of insert_resource. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 05:20:59 +0000