summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* hwmon: (w83627ehf) Fix broken driver initGuenter Roeck2011-11-061-3/+6
| | | | | | | | | | | | | | | | | Commit 2265cef2 (hwmon: (w83627ehf) Properly report PECI and AMD-SI sensor types) results in kernel panic if data->temp_label was not initialized. The problem was found with chip W83627DHG-P. Add check if data->temp->label was set before use. Based on incomplete patch by Alexander Beregalov. Reported-by: Alexander Beregalov <a.beregalov@gmail.com> Tested-by: Alexander Beregalov <a.beregalov@gmail.com> Cc: stable@kernel.org Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (coretemp) Fix for non-SMP buildsJean Delvare2011-11-061-2/+1
| | | | | | | | | | | | | | | The definition of TO_ATTR_NO in the non-SMP case is wrong. As the SMP definition resolves to the correct value, just use this for both cases. Without this fix the temperature attributes are named temp0_* instead of temp2_*, so libsensors won't pick them. Broken since kernel 3.0. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Phil Sutter <phil@nwl.cc> Cc: stable@kernel.org Acked-by: Durgadoss R <Durgadoss.r@intel.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
* Merge branch 'next/devel2' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds2011-11-0523-153/+651
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'next/devel2' of git://git.linaro.org/people/arnd/arm-soc: (30 commits) ARM: mmp: register internal sram bank ARM: mmp: register audio sram bank ARM: mmp: add sram allocator gpio/samsung: Complain loudly if we don't know the SoC ARM: S3C64XX: Fix SoC identification for S3C64xx devices ARM: S3C2443: Remove redundant s3c_register_clocks call for init_clocks ARM: S3C24XX: Add devname for hsmmc1 pclk ARM: S3C24XX: use clk_get_rate to init fclk in common_setup_clocks ARM: S3C2443: Accommodate cpufreq frequency scheme in armdiv ARM: S3C2443: handle unset armdiv values gracefully ARM: S3C2443: Add get_rate operation for clk_armdiv ARM: S3C2416: Add comment describing the armdiv/armclk ARM: S3C2443: Move clk_arm and clk_armdiv to common code ARM: S3C24XX: Add infrastructure to transmit armdiv to common code ARM: S3C2416: Add armdiv_mask constant ARM: EXYNOS4: Add support for M-5MOLS camera on Nuri board ARM: EXYNOS4: Enable MFC on ORIGEN ARM: SAMSUNG: Add support s3c2416-adc for S3C2416/S3C2450 ARM: SAMSUNG: Add support s3c2443-adc for S3C2443 ARM: SAMSUNG: Allow overriding of adc device name for S3C24XX ...
| * Merge branch 'pxa/devel' into next/devel2Arnd Bergmann2011-10-30256-1185/+1871
| |\ | | | | | | | | | | | | Conflicts: arch/arm/mach-s3c2416/s3c2416.c
| | * ARM: mmp: register internal sram bankLeo Yan2011-10-253-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MMP2 have the internal sram, this sram can be allocated for video, power management and secure processor. Now the sram usage is: 0xd1000000 ~ 0xd101ffff (128KB) : reserved for secure processor 0xd1020000 ~ 0xd1037fff (96KB) : for video and PM Register the internal sram's second half 96KB buffer, so that video and PM can dynamically alloc/free from it. Signed-off-by: Leo Yan <leoy@marvell.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
| | * ARM: mmp: register audio sram bankLeo Yan2011-10-253-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MMP platform has sram for the audio island; Add the device structure for the audio sram, and register the audio sram device at init phase. Signed-off-by: Leo Yan <leoy@marvell.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
| | * ARM: mmp: add sram allocatorLeo Yan2011-10-254-1/+205
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On mmp platform, there have two sram banks: audio sram and internal sram. The audio sram is mainly for audio; the internal sram is for video, wtm and power management. So add the sram allocator using genalloc to manage them. Every sram bank will register its own platform device info, after the sram allocator create the generic pool for the sram bank, the user module can use the pool's name to get the pool handler; then it can use the handler to alloc/free memory with genalloc APIs. Signed-off-by: Leo Yan <leoy@marvell.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
| * | Merge branch 'samsung/devel' into next/devel2Arnd Bergmann2011-10-2017-152/+419
| |\ \
| | * | gpio/samsung: Complain loudly if we don't know the SoCMark Brown2011-10-181-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we don't know the SoC type then we won't add any chips which is rather unfortunate as neither GPIO nor pinmux APIs will work, breaking lots of different subsystems. Logging at least provides a hint to the user as to what's gone wrong. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | ARM: S3C64XX: Fix SoC identification for S3C64xx devicesMark Brown2011-10-181-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The IS_SAMSUNG_CPU() macro works by comparing the CPU ID mask exactly with the CPU ID. This was failing for S3C64xx SoCs as in order to support identification of the exact device the mask covers both variants of the chip, meaning that the test would always fail on S3C6410 devices. This in turn caused the core GPIO subsystem to fail to identify the CPU and not support any GPIOs, crippling the system. As a minimally invasive fix change the test for the class to be done by checking each implementation and oring them together. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | ARM: S3C2443: Remove redundant s3c_register_clocks call for init_clocksAxel Lin2011-10-141-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit af337f3e633a198034a99450416257ddf2307497 "ARM: S3C2443: Move parts of the clock code to common clock file", the init_clocks array is moved to arch/arm/plat-s3c24xx/s3c2443-clock.c. Now we call s3c_register_clocks for init_clocks in s3c2443_common_init_clocks. Thus we can remove the empty init_clocks array here and remove the redundant s3c_register_clocks call for init_clocks in s3c2443_init_clocks. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | ARM: S3C24XX: Add devname for hsmmc1 pclkHeiko Stuebner2011-10-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | S3C2443 uses hsmmc1 as its only hsmmc device and for S3C2416/S3C2450 it's the second hsmmc channel with the same PCLKCON bit. The hsmmc-if clocks on both systems already got a devname, as did the hsmmc pclk for hsmmc0 on the S3C2416. So to make it possible to identify the hsmmc1 pclk on S3C2416 add the correct devname for it. The sclk name on S3C2443 also is s3c-sdhci.1. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | ARM: S3C24XX: use clk_get_rate to init fclk in common_setup_clocksHeiko Stuebner2011-10-144-26/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously the fclk rate was calculated by dividing the pll through the divider value of the armdiv. With a real armdiv clk in place it's possible to simply read its value, which does essentially the same. This change makes the whole fdiv_fn function pointers supplied to s3c2443_common_init_clocks and s3c2443_common_setup_clocks obsolete, so remove it too. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | ARM: S3C2443: Accommodate cpufreq frequency scheme in armdivHeiko Stuebner2011-10-141-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cpufreq uses frequencies in kHz and not Hz, so set_rate and round_rate would be called with a frequency of 266666000 instead of 266666666 but the clock functions check for rates smaller or equal to the targetrate. As the armdiv does not support steps this small we can accommodate this by simply also setting the last 3 digits of the calculated rate to zero. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | ARM: S3C2443: handle unset armdiv values gracefullyHeiko Stuebner2011-10-141-7/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The armdiv array may contain unset divider values. Check the relevant value to prevent division by zero errors. Also check for set nr_armdiv and armdivmask before meddling with clkdiv0. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | ARM: S3C2443: Add get_rate operation for clk_armdivHeiko Stuebner2011-10-141-0/+14
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | ARM: S3C2416: Add comment describing the armdiv/armclkHeiko St?bner2011-10-141-0/+8
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | ARM: S3C2443: Move clk_arm and clk_armdiv to common codeHeiko St?bner2011-10-142-83/+89
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The system-layout of the armdiv and armclk is common to S3C2443/S3C2416/S3C2450 and only differs in the array of possible dividers. Therefore it is possible to reuse the clock definitions for all of these SoCs. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | ARM: S3C24XX: Add infrastructure to transmit armdiv to common codeHeiko Stuebner2011-10-144-4/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is needed for making the armdiv clock common to S3C2443 and S3C2416/2450. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | ARM: S3C2416: Add armdiv_mask constantHeiko Stuebner2011-10-142-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The S3C2416/2450 has only 3 bits for the armdiv setting instead of the 4 bits of the S3C2443. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | ARM: EXYNOS4: Add support for M-5MOLS camera on Nuri boardSylwester Nawrocki2011-10-142-0/+160
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add voltage regulator and platform data definition for M-5MOLS sensor and MIPI-CSI receiver drivers. Add CAM power domain dependencies for FIMC device and set up camera port A GPIO. Configure I2C0 bus timings. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: HeungJun Kim <riverful.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | ARM: EXYNOS4: Enable MFC on ORIGENSachin Kamat2011-10-142-1/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables multi-format codec (MFC) support on ORIGEN board. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | ARM: SAMSUNG: Add support s3c2416-adc for S3C2416/S3C2450Heiko Stuebner2011-10-142-6/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ADC of the S3C2416/2450 SoC is 10 or 12 bit wide, has its source selection in the register base+0x18 and its width selection in bit 03 of the ADCCON register. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | ARM: SAMSUNG: Add support s3c2443-adc for S3C2443Heiko Stuebner2011-10-142-5/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The S3C2443-adc is 10 bit wide and has its mux-select in an extra register at base+0x18 Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | ARM: SAMSUNG: Allow overriding of adc device name for S3C24XXHeiko Stuebner2011-10-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The adc blocks of S3C2443 and S3C2416 contain quirks not present in the stock S3C24xx adc. Therefore allow them to alter the device name via s3c_adc_setname. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | ARM: SAMSUNG: Fix mux bit modification in s3c_adc_selectHeiko Stuebner2011-10-121-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mux bits in the adccon register should be cleared only if muxing is really done in ADCCON and not another register. This patch introduces a conditional for this. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | ARM: SAMSUNG: Add adc registers for S3C2443/S3C2416Heiko Stuebner2011-10-121-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The adc blocks of the S3C2443 and S3C2416 define some additional registers and bits. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | gpio/samsung: Move SoC specific codes within macroTushar Behera2011-10-121-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In drivers/gpio/gpio-samsung.c, there are certain structures and functions which are not getting used if the particular CPU is not selected. These code segments are moved under CPU specific macros to remove compilation warnings. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | gpio/samsung: Fix incorrect gpio pull up/down callback for EXYNOS4Thomas Abraham2011-10-121-12/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some of the gpio chips of exynos4 are assigned a default gpio config without the exynos4 specific pull up/down callbacks which resulted in incorrect setting of pull up/down configuration. Fix this by adding two new exynos4 specific entries in the array of default configs with set_pull and get_pull callbacks set to exynos4 specific callbacks The new default gpio configs can then be used for exynos4 gpio chips. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | ARM: S3C64XX: Enable TCM supportMark Brown2011-10-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The S3C64xx CPUs have TCMs so enable the kernel support for it on these systems. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | gpio/samsung: only register available gpio banksPeter Korsgaard2011-10-121-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Only register gpio banks provided by SoC instead of the maximum possible to lessen confusion, get rid of a warning from gpiolib and stop it from eating into the extra gpios for configs with S3C24XX_GPIO_EXTRA != 0. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | ARM: S3C2410: fix S3C_GPIO_SPACE #error message to match realityPeter Korsgaard2011-10-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | S3C_GPIO_SPACE cannont be NON-zero, not zero. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | ARM: EXYNOS4: Remove useless codes on NURI boardKukjin Kim2011-10-121-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The 'nuri_cm_devices' is defined but not used. Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | ARM: EXYNOS4: Register power domains on ORIGENSachin Kamat2011-10-121-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch registers all the available power domains on ORIGEN board. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | ARM: EXYNOS4: Enable regulator support for HDMI on ORIGENSachin Kamat2011-10-121-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the DC5V line is connected directly to the HDMI connector, "hdmi-en" regulator would become a dummy regulator on origen board (by defining REGULATOR_DUMMY in the kernel config file). Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| * | | Merge branch 'samsung/devel' of ↵Arnd Bergmann2011-10-20585-10354/+13442
| |\| | | | | | | | | | | | | | git+ssh://git.linaro.org/home/arndbergmann/public_git/arm-soc into next/devel2
* | | | Merge branch 'next/cleanup3' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds2011-11-05226-7214/+8025
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'next/cleanup3' of git://git.linaro.org/people/arnd/arm-soc: (79 commits) ARM: SAMSUNG: Move fimc plat. device from board files to plat-samsung ARM: SAMSUNG: Cleanup resources by using macro ARM: SAMSUNG: Cleanup plat-samsung/devs.c and devs.h ARM: S5P: To merge devs.c files to one devs.c ARM: S3C64XX: To merge devs.c files to one devs.c ARM: S3C24XX: To merge s3c24xx devs.c files to one devs.c ARM: S5P64X0: Add Power Management support ARM: S5P: Make the sleep code common for S5P series SoCs ARM: S5P: Make the common S5P PM code conditionally compile ARM: SAMSUNG: Move S5P header files to plat-samsung ARM: SAMSUNG: Move S3C24XX header files to plat-samsung ARM: SAMSUNG: Moving each SoC support header files ARM: SAMSUNG: Consolidate plat/pll.h ARM: SAMSUNG: Consolidate plat/pwm-clock.h ARM: SAMSUNG: Cleanup mach/clkdev.h ARM: SAMSUNG: remove sdhci default configuration setup platform helper ARM: EXYNOS4: Add FIMC device on SMDKV310 board ARM: EXYNOS4: Add header file protection macros ARM: EXYNOS4: Add usb ehci device to the SMDKV310 ARM: S3C2443: Add hsspi-clock from pclk and rename S3C2443 hsspi sclk ... Fix up conflicts in - arch/arm/mach-exynos4/{Kconfig,clock.c} ARM_CPU_SUSPEND, various random device tables (gah!) - drivers/gpio/Makefile sa1100 gpio added, samsung gpio drivers merged
| * \ \ \ Merge branch 'depends/rmk/memory_h' into next/cleanup2Arnd Bergmann2011-11-01463-1662/+827
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are lots of conflicts between the omap and exynos cleanups and the memory.h remove series. Conflicts: arch/arm/mach-exynos4/mach-smdkc210.c arch/arm/mach-exynos4/mach-smdkv310.c arch/arm/mach-imx/mach-cpuimx27.c arch/arm/mach-omap1/board-ams-delta.c arch/arm/mach-omap1/board-generic.c arch/arm/mach-omap1/board-h2.c arch/arm/mach-omap1/board-h3.c arch/arm/mach-omap1/board-nokia770.c arch/arm/mach-omap1/board-osk.c arch/arm/mach-omap1/board-palmte.c arch/arm/mach-omap1/board-palmtt.c arch/arm/mach-omap1/board-palmz71.c arch/arm/mach-omap1/board-sx1.c arch/arm/mach-omap1/board-voiceblue.c arch/arm/mach-omap1/io.c arch/arm/mach-omap2/board-generic.c arch/arm/mach-omap2/io.c arch/arm/plat-omap/io.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * \ \ \ \ Merge branch 'omap/cleanup' into next/cleanup2Arnd Bergmann2011-10-31154-5540/+6353
| |\ \ \ \ \
| * | | | | | ARM: SAMSUNG: Move fimc plat. device from board files to plat-samsungSylwester Nawrocki2011-10-134-10/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the platform device definitions from boards code to plat-samsung to avoid multiple instances when multiple board support is compiled in. The boards should select at least S5P_DEV_FIMC0 to enable FIMC support. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| * | | | | | ARM: SAMSUNG: Cleanup resources by using macroKukjin Kim2011-10-063-582/+120
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch cleans up the Samsung resources in plat-samsung/devs.c by using defined helpers at <linux/ioport.h>. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| * | | | | | ARM: SAMSUNG: Cleanup plat-samsung/devs.c and devs.hKukjin Kim2011-10-0629-1605/+1058
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch merges each dev files to one devs.c file in plat-samsung directory and this help to keep it more easily to reduce plat- directories such as plat-s3c24xx and plat-s5p. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| * | | | | | ARM: S5P: To merge devs.c files to one devs.cKukjin Kim2011-10-0617-696/+468
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves regarding s5p dev files to one devs.c file in plat-samsung directory and this help to keep it more easily. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| * | | | | | ARM: S3C64XX: To merge devs.c files to one devs.cKukjin Kim2011-10-063-55/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves regarding s3c64xx dev files to one devs.c file in plat-samsung directory and this help to keep it more easily. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| * | | | | | ARM: S3C24XX: To merge s3c24xx devs.c files to one devs.cKukjin Kim2011-10-069-604/+609
| | |_|_|/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves regarding s3c24xx dev files to one devs.c file in plat-samsung directory and this is required to merge to plat-samsung. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| * | | | | ARM: S5P64X0: Add Power Management supportAbhilash Kesavan2011-10-0410-1/+472
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add suspend-to-ram support for SMDK6440/50 Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| * | | | | ARM: S5P: Make the sleep code common for S5P series SoCsAbhilash Kesavan2011-10-048-63/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sleep code for S5PV210 and EXYNOS4 are identical; moreover S5p64X0 and S5PC100 for which support will be added soon can use the same procedure. Create a common sleep code in the plat-s5p directory so that it can be re-used. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| * | | | | ARM: S5P: Make the common S5P PM code conditionally compileAbhilash Kesavan2011-10-044-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pave the way for adding PM support on S5P64X0, which is more similar to the S3C64XX series than the S5P series. Hence, the common pm code (containing dummy functions) should not be used for S5P64X0. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| * | | | | Merge branch 'next-samsung-board-2' into next-samsung-devel-2Kukjin Kim2011-10-0415-150/+251
| |\ \ \ \ \
| * \ \ \ \ \ Merge branch 'next-samsung-cleanup-2' into next-samsung-devel-2Kukjin Kim2011-10-0477-1159/+485
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/plat-s5p/include/plat/pll.h
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 16:32:40 +0000