summaryrefslogtreecommitdiffstats
path: root/Documentation/hwmon
Commit message (Collapse)AuthorAgeFilesLines
* hwmon: (ina3221) Read channel input source info from DTNicolin Chen2018-10-101-0/+2
| | | | | | | | | | | | | | | | | | | | | | An ina3221 chip has three input ports. Each port is used to measure the voltage and current of its input source. The DT binding now has defined bindings for their input sources, so the driver should read these information and handle accordingly. This patch adds a new structure of input source specific information including input source label, shunt resistor value and its connection status. It exposes these labels via in[123]_label sysfs nodes upon available, and also disables those channels where there are no input source being connected. Meanwhile, it also adds in[123]_enable sysfs nodes for users to get control of three channels, and returns -ENODATA code for any sensor read according to hwmon ABI. Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Add MAX31725/6 supportKun Yi2018-10-101-3/+3
| | | | | | | | | | | | | MAX31725/MAX31726 are local temperature sensors with +/- 0.5 degree Celsius accuracy and 16-bit (0.00390625 degrees Celsius) resolution. They have a register mapping and encoding compatible with the lm75 series drivers. Address scan and extended temperature range are not supported by this patch. Tested on real hardware and verified temperature readings are correct. Signed-off-by: Kun Yi <kunyi@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (mc13783-adc) Use nxp.com URLsFabio Estevam2018-10-101-2/+2
| | | | | | | | | | Use the nxp.com URLs for the MC13783 and MC13892 datasheets. The original URLs are still valid, but the nxp.com one is shorter and more up-to-date. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (mc13783-adc) Remove the mention to 'Atlas'Fabio Estevam2018-10-101-2/+2
| | | | | | | | | | 'Atlas' was an internal name for the MC13783 PMIC only and does not apply to MC13892. To avoid confusion, remove the 'Atlas' term from the description. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* drivers: hwmon: (pmbus/ltc2978) Add support for LTM4686 uModuleMichael Hennerich2018-10-101-0/+5
| | | | | | | | | | This patch adds support for LTM4686 Ultrathin Dual 10A or Single 20A uModule Regulator with Digital Power System Management. Datasheet: http://www.analog.com/ltm4686 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (ina2xx) fix sysfs shunt resistor read accessLothar Felten2018-08-261-1/+1
| | | | | | | | | | fix the sysfs shunt resistor read access: return the shunt resistor value, not the calibration register contents. update email address Signed-off-by: Lothar Felten <lothar.felten@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* Merge tag 'armsoc-drivers' of ↵Linus Torvalds2018-08-231-0/+22
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Some of the larger changes this merge window: - Removal of drivers for Exynos5440, a Samsung SoC that never saw widespread use. - Uniphier support for USB3 and SPI reset handling - Syste control and SRAM drivers and bindings for Allwinner platforms - Qualcomm AOSS (Always-on subsystem) reset controller drivers - Raspberry Pi hwmon driver for voltage - Mediatek pwrap (pmic) support for MT6797 SoC" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (52 commits) drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests soc: fsl: cleanup Kconfig menu soc: fsl: dpio: Convert DPIO documentation to .rst staging: fsl-mc: Remove remaining files staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl staging: fsl-dpaa2: eth: move generic FD defines to DPIO soc: fsl: qe: gpio: Add qe_gpio_set_multiple usb: host: exynos: Remove support for Exynos5440 clk: samsung: Remove support for Exynos5440 soc: sunxi: Add the A13, A23 and H3 system control compatibles reset: uniphier: add reset control support for SPI cpufreq: exynos: Remove support for Exynos5440 ata: ahci-platform: Remove support for Exynos5440 soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCs soc: mediatek: pwrap: add pwrap driver for mt6797 SoCs soc: mediatek: pwrap: fix cipher init setting error dt-bindings: pwrap: mediatek: add pwrap support for MT6797 reset: uniphier: add USB3 core reset control dt-bindings: reset: uniphier: add USB3 core reset support ...
| * hwmon: Add support for RPi voltage sensorStefan Wahren2018-07-091-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | Currently there is no easy way to detect undervoltage conditions on a remote Raspberry Pi. This hwmon driver retrieves the state of the undervoltage sensor via mailbox interface. The handling based on Noralf's modifications to the downstream firmware driver. In case of an undervoltage condition only an entry is written to the kernel log. CC: "Noralf Trønnes" <noralf@tronnes.org> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Guenter Roeck <linux@roeck-us.net>
* | Merge tag 'powerpc-4.19-1' of ↵Linus Torvalds2018-08-171-2/+41
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - A fix for a bug in our page table fragment allocator, where a page table page could be freed and reallocated for something else while still in use, leading to memory corruption etc. The fix reuses pt_mm in struct page (x86 only) for a powerpc only refcount. - Fixes to our pkey support. Several are user-visible changes, but bring us in to line with x86 behaviour and/or fix outright bugs. Thanks to Florian Weimer for reporting many of these. - A series to improve the hvc driver & related OPAL console code, which have been seen to cause hardlockups at times. The hvc driver changes in particular have been in linux-next for ~month. - Increase our MAX_PHYSMEM_BITS to 128TB when SPARSEMEM_VMEMMAP=y. - Remove Power8 DD1 and Power9 DD1 support, neither chip should be in use anywhere other than as a paper weight. - An optimised memcmp implementation using Power7-or-later VMX instructions - Support for barrier_nospec on some NXP CPUs. - Support for flushing the count cache on context switch on some IBM CPUs (controlled by firmware), as a Spectre v2 mitigation. - A series to enhance the information we print on unhandled signals to bring it into line with other arches, including showing the offending VMA and dumping the instructions around the fault. Thanks to: Aaro Koskinen, Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Alexey Spirkov, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Bartosz Golaszewski, Benjamin Herrenschmidt, Bharat Bhushan, Bjoern Noetel, Boqun Feng, Breno Leitao, Bryant G. Ly, Camelia Groza, Christophe Leroy, Christoph Hellwig, Cyril Bur, Dan Carpenter, Daniel Klamt, Darren Stevens, Dave Young, David Gibson, Diana Craciun, Finn Thain, Florian Weimer, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geoff Levand, Guenter Roeck, Gustavo Romero, Haren Myneni, Hari Bathini, Joel Stanley, Jonathan Neuschäfer, Kees Cook, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Mathieu Malaterre, Mauro S. M. Rodrigues, Michael Hanselmann, Michael Neuling, Michael Schmitz, Mukesh Ojha, Murilo Opsfelder Araujo, Nicholas Piggin, Parth Y Shah, Paul Mackerras, Paul Menzel, Ram Pai, Randy Dunlap, Rashmica Gupta, Reza Arbab, Rodrigo R. Galvao, Russell Currey, Sam Bobroff, Scott Wood, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stan Johnson, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, Venkat Rao, zhong jiang" * tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (234 commits) powerpc/mm/book3s/radix: Add mapping statistics powerpc/uaccess: Enable get_user(u64, *p) on 32-bit powerpc/mm/hash: Remove unnecessary do { } while(0) loop powerpc/64s: move machine check SLB flushing to mm/slb.c powerpc/powernv/idle: Fix build error powerpc/mm/tlbflush: update the mmu_gather page size while iterating address range powerpc/mm: remove warning about ‘type’ being set powerpc/32: Include setup.h header file to fix warnings powerpc: Move `path` variable inside DEBUG_PROM powerpc/powermac: Make some functions static powerpc/powermac: Remove variable x that's never read cxl: remove a dead branch powerpc/powermac: Add missing include of header pmac.h powerpc/kexec: Use common error handling code in setup_new_fdt() powerpc/xmon: Add address lookup for percpu symbols powerpc/mm: remove huge_pte_offset_and_shift() prototype powerpc/lib: Use patch_site to patch copy_32 functions once cache is enabled powerpc/pseries: Fix endianness while restoring of r3 in MCE handler. powerpc/fadump: merge adjacent memory ranges to reduce PT_LOAD segements powerpc/fadump: handle crash memory ranges array index overflow ...
| * | hwmon: (ibmpowernv) Add attributes to enable/disable sensor groupsShilpasri G Bhat2018-07-311-2/+41
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OPAL firmware provides the facility for some groups of sensors to be enabled/disabled at runtime to give the user the option of using the system resources for collecting these sensors or not. For example, on POWER9 systems, the On Chip Controller (OCC) gathers various system and chip level sensors and maintains their values in main memory. This patch provides support for enabling/disabling the sensor groups like power, temperature, current and voltage. Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> [stewart@linux.vnet.ibm.com: Commit message] Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* | hwmon: Add NPCM7xx PWM and Fan driverTomer Maimon2018-07-081-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add Nuvoton BMC NPCM750/730/715/705 Pulse Width Modulation (PWM) and Fan tacho driver. The Nuvoton BMC NPCM750/730/715/705 supports 8 PWM controller outputs and 16 Fan controller inputs. The driver provides a sysfs entries through which the user can configure the duty-cycle value from 0(off) and 255(full speed) and read the fan tacho rpm value. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | hwmon: (pmbus/max34440) Add support for MAX34451.Kun Yi2018-07-081-4/+12
| | | | | | | | | | | | | | | | MAX34451 is a 16-Channel Voltage/Current Monitor and 12-Channel Sequencer. Signed-off-by: Kun Yi <kunyi@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | hwmon: Document the sensor enable attributeShilpasri G Bhat2018-07-081-0/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Document new ABI attributes: in[0-*]_enable fan[1-*]_enable temp[1-*]_enable curr[1-*]_enable power[1-*]_enable energy[1-*]_enable humidity[1-*]_enable Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> [groeck: Updated commit text, removed unnecessary details from ABI description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | hwmon: (mlxreg-fan) Add support for Mellanox FAN driverVadim Pasternak2018-07-081-0/+60
|/ | | | | | | | | | | | | | | | | | | Driver obtains PWM and tachometers registers location according to the system configuration and creates FAN/PWM hwmon objects and a cooling device. PWM and tachometers are controlled through the on-board programmable device, which exports its register map. This device could be attached to any bus type, for which register mapping is supported. Single instance is created with one PWM control, up to 12 tachometers and one cooling device. It could be as many instances as programmable device supports. Currently driver will be activated from the Mellanox platform driver: drivers/platform/x86/mlx-platform.c. For the future ARM based systems it could be activated from the ARM platform module. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* docs: Fix more broken referencesMauro Carvalho Chehab2018-06-151-1/+1
| | | | | | | | | | | | | | | | As we move stuff around, some doc references are broken. Fix some of them via this script: ./scripts/documentation-file-ref-check --fix Manually checked that produced results are valid. Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Jonathan Corbet <corbet@lwn.net>
* hwmon: (ltc2990) support all measurement modesTom Levens2018-05-211-9/+15
| | | | | | | | | | | | | | | | | | Updated version of the ltc2990 driver which supports all measurement modes (current, voltage, temperature) available in the chip. If devicetree is used, the mode must be specified with the property "lltc,meas-mode". The format and possible values of the property are described in the binding. If devicetree is not used, the mode of the chip will not be configured. Unless the chip is configured by another source, only the internal temperature and supply voltage will be measured. Signed-off-by: Tom Levens <tom.levens@cern.ch> Tested-By: mike.looijmans@topic.nl [groeck: Fixed compiler warning] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (core) check parent dev != NULL when chip != NULLLucas Magasweran2018-05-211-1/+2
| | | | | | | | | | hwmon_device_register_with_info() registration API requires a non-NULL parent device when chip is non-NULL. This commit adds a check and documents this requirement. Signed-off-by: Lucas Magasweran <lucas.magasweran@ieee.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm92) Add max6635 to lm92_id[]Alvaro G. M2018-03-221-1/+1
| | | | | | | | | Since autodetection of this chip was removed, it makes sense to add prefix max6635 so that the device can be instantiated by its actual name. Signed-off-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (pmbus/adm1275) Add support for ADM1272Guenter Roeck2018-03-221-8/+12
| | | | | | | The chip is quite similar to other chips in the series, but as usual it comes with its own quirks. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm92) Do not try to detect MAX6635Alvaro G. M2018-03-221-3/+1
| | | | | | | | | | | | Maxim MAX663x family are mostly compatible with LM92, but they lack any identification register. Weakening the detect function would make it prone to false positives, and current one doesn't detect all chips. Therefore, the detect function for max6635 devices is removed in favor of explicit device instatiation. Signed-off-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (nct6775) Add support for NCT6796DGuenter Roeck2018-03-101-24/+32
| | | | | | | | | NCT6796D is mostly compatible to NCT6795D. It supports an additional pwm control and fan speed channel. While we are at it, update documentation for NCT6795D. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (sht3x) Update data sheet URLDanilo Bargen2018-03-101-1/+1
| | | | | | | | | | The previously used URL is dead. Sensirion provides permalinks for their product datasheets at https://www.sensirion.com/en/about-us/links/. Signed-off-by: Danilo Bargen <mail@dbrgn.ch> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (sht21) Update data sheet URLsDanilo Bargen2018-03-101-3/+3
| | | | | | | | | | The previously used URLs are dead. Sensirion provides permalinks for their product datasheets at https://www.sensirion.com/en/about-us/links/. Signed-off-by: Danilo Bargen <mail@dbrgn.ch> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (pmbus/max31785) Add dual tachometer supportAndrew Jeffery2018-01-021-3/+5
| | | | | | | | | | | | | | | | | | | | | The dual tachometer feature is implemented in hardware with a TACHSEL input to indicate the rotor under measurement, and exposed on the device by extending the READ_FAN_SPEED_1 word with two extra bytes*. The need to read the non-standard four-byte response leads to a cut-down implementation of i2c_smbus_xfer_emulated() included in the driver. Further, to expose the second rotor tachometer value to userspace the values are exposed through virtual pages. We re-route accesses to FAN_CONFIG_1_2 and READ_FAN_SPEED_1 on pages 23-28 (not defined by the hardware) to the same registers on pages 0-5, and with the latter command we extract the value from the second word of the four-byte response. * The documentation recommends the slower rotor be associated with TACHSEL=0, which corresponds to the first word of the response. The TACHSEL=0 measurement is used by the controller's closed-loop fan management to judge target fan rate. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (pmbus/max31785) Add fan controlAndrew Jeffery2018-01-021-0/+7
| | | | | | | | | | | The implementation makes use of the new fan control virtual registers exposed by the pmbus core. It mixes use of the default implementations with some overrides via the read/write handlers to handle FAN_COMMAND_1 on the MAX31785, whose definition breaks the value range into various control bands dependent on RPM or PWM mode. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (pmbus/lm25066) Drop support for LM25063Guenter Roeck2018-01-021-19/+1
| | | | | | LM25063 was never released. Drop support for it. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (w83773g) Add documentationLei YU2018-01-021-0/+33
| | | | | | | Add documentation for the w83773g driver. Signed-off-by: Lei YU <mine260309@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* pmbus: Add driver for Maxim MAX31785 Intelligent Fan ControllerAndrew Jeffery2017-11-051-0/+51
| | | | | | | | | | | | | | The Maxim MAX31785 is a PMBus device providing closed-loop, multi-channel fan management with temperature and remote voltage sensing. It supports various fan control features, including PWM frequency control, temperature hysteresis, dual tachometer measurements, and fan health monitoring. This patch presents a basic driver using only the existing features of the PMBus subsystem. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> [groeck: Modified description to clarify that fan control is not yet provided] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (sht15) Root out platform dataLinus Walleij2017-10-291-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | After finding out there are active users of this sensor I noticed: - It has a single PXA27x board file using the platform data - The platform data is only used to carry two GPIO pins, all other fields are unused - The driver does not use GPIO descriptors but the legacy GPIO API I saw we can swiftly fix this by: - Killing off the platform data entirely - Define a GPIO descriptor lookup table in the board file - Use the standard devm_gpiod_get() to grab the GPIO descriptors from either the device tree or the board file table. This compiles, but needs testing. Cc: arm@kernel.org Cc: Marco Franchi <marco.franchi@nxp.com> Cc: Davide Hug <d@videhug.ch> Cc: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Marco Franchi <marco.franchi@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (pmbus/lm25066) Add support for TI LM5066IXo Wang2017-08-301-2/+7
| | | | | | | | | | The TI LM5066I hotswap controller is a more accurate version of the LM5066 device already supported. It has different measurement conversion coefficients than the LM5066, so it needs to be recognized as a different device. Signed-off-by: Xo Wang <xow@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* Documentation: hwmon: Document the IBM CFF power supplyEdward A. James2017-08-291-0/+54
| | | | | Signed-off-by: Edward A. James <eajames@us.ibm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (ftsteutates) Fix clearing alarm sysfs entriesThilo Cestonaro2017-08-131-0/+4
| | | | | | | | | | sysfs store functions should return the number of bytes written. Returning zero results in an endless loop. Fixes: 08426eda58e0 ("hwmon: Add driver for FTS BMC chip "Teutates"") Signed-off-by: Thilo Cestonaro <thilo.cestonaro@ts.fujitsu.com> [groeck: Clean up documentation change and description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (pmbus) move header file out of I2C realmWolfram Sang2017-06-111-1/+1
| | | | | | | | include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (ltc4245) move header file out of I2C realmWolfram Sang2017-06-111-1/+1
| | | | | | | | include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (ads1015) move header file out of I2C realmWolfram Sang2017-06-111-1/+1
| | | | | | | | include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (adt7475) temperature smoothingChris Packham2017-06-111-0/+4
| | | | | | | | | When enabled temperature smoothing allows ramping the fan speed over a configurable period of time instead of jumping to the new speed instantaneously. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (adt7475) fan stall preventionChris Packham2017-06-111-0/+5
| | | | | | | | | | | By default adt7475 will stop the fans (pwm duty cycle 0%) when the temperature drops past Tmin - hysteresis. Some systems want to keep the fans moving even when the temperature drops so add new sysfs attributes that configure the enhanced acoustics min 1-3 which allows the fans to run at the minimum configure pwm duty cycle. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (pmbus) Add client driver for IR35221Samuel Mendoza-Jonas2017-06-111-0/+87
| | | | | | | | | | IR35221 is a Digital DC-DC Multiphase Converter Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> [groeck: Preserve alphabetic order in Kconfig; add missing break statements (from Dan Carpenter); add missing error checks] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* drivers: hwmon: Support for ASPEED PWM/Fan tachJaghathiswari Rankappagounder Natarajan2017-04-101-0/+22
| | | | | | | | | | | | | | | The ASPEED AST2400/2500 PWM controller supports 8 PWM output ports. The ASPEED AST2400/2500 Fan tach controller supports 16 tachometer inputs. The device driver matches on the device tree node. The configuration values are read from the device tree and written to the respective registers. The driver provides a sysfs entries through which the user can configure the duty-cycle value (ranging from 0 to 100 percent) and read the fan tach rpm value. Signed-off-by: Jaghathiswari Rankappagounder Natarajan <jaghu@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* docs: hwmon: Fix typo "Microship" should be "Microchip"Chris Packham2017-04-021-1/+1
| | | | | Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* Merge tag 'docs-4.11' of git://git.lwn.net/linuxLinus Torvalds2017-02-221-4/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull documentation updates from Jonathan Corbet: "A slightly quieter cycle for documentation this time around. Three more DocBook template files have been converted to RST; only 21 to go. There are various build improvements and the usual array of documentation improvements and fixes" * tag 'docs-4.11' of git://git.lwn.net/linux: (44 commits) docs / driver-api: Fix structure references in device_link.rst PM / docs: Fix structure references in device.rst Add a target to check broken external links in the Documentation Documentation: Fix linux-api list typo Documentation: DocBook/Makefile comment typo Improve sparse documentation Documentation: make Makefile.sphinx no-ops quieter Documentation: DMA-ISA-LPC.txt Documentation: input: fix path to input code definitions docs: Remove the copyright year from conf.py docs: Fix a warning in the Korean HOWTO.rst translation PM / sleep / docs: Convert PM notifiers document to reST PM / core / docs: Convert sleep states API document to reST PM / core: Update kerneldoc comments in pm.h doc-rst: Fix recursive make invocation from macros doc-rst: Delete output of failed dot-SVG conversion doc-rst: Break shell command sequences on failure Documentation/sphinx: make targets independent of Sphinx work for HAVE_SPHINX=0 doc-rst: fixed cleandoc target when used with O=dir Documentation/sphinx: prevent generation of .pyc files in the source tree ...
| * Documentation: fix spelling mistakes of "Celcius" -- > "Celsius"Colin Ian King2017-01-041-4/+4
| | | | | | | | | | | | Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
* | hwmon: Update documentation to clarify rules for the 'name' attributeGuenter Roeck2017-01-252-2/+7
| | | | | | | | | | | | | | | | | | Clarify that the name attribute must report a valid name, and the rules for valid names. Also clarify that the name parameter must be provided for all supported API functions. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | hwmon: (lm70) Add support for TI TMP122/124Florian Fainelli2017-01-211-2/+6
| | | | | | | | | | | | | | | | | | Add support for Texas Instruments TMP122/124 which are nearly identical to their TMP121/123 except that they also support programmable temperature thresholds. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* | hwmon: (sht21) Add Electronic Identification Code retrievalPeter A. Bigot2017-01-021-2/+3
|/ | | | | | | | Expose the per-chip unique identifier so it can be used to identify the sensor producing the measurements. Signed-off-by: Peter A. Bigot <pab@pabigot.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* Merge tag 'hwmon-for-linus-v4.10' of ↵Linus Torvalds2016-12-133-32/+93
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: - new drivers for TMP108 and TC654 - hwmon core code cleanup - coretemp driver cleanup - fix overflow issues in several drivers - minor fixes, cleanups and enhancements in various drivers * tag 'hwmon-for-linus-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (41 commits) hwmon: (g762) Fix overflows and crash seen when writing limit attributes hwmon: (emcw201) Fix overflows seen when writing into limit attributes hwmon: (emc2103) Fix overflows seen when temperature limit attributes hwmon: (lm85) Fix overflows seen when writing voltage limit attributes hwmon: (lm87) Fix overflow seen when writing voltage limit attributes hwmon: (nct7802) Fix overflows seen when writing into limit attributes hwmon: (adt7470) Fix overflows seen when writing into limit attributes hwmon: (adt7462) Fix overflows seen when writing into limit attributes hwmon: (adm1026) Fix overflows seen when writing into limit attributes hwmon: (adm1025) Fix overflows seen when writing voltage limits hwmon: (via-cputemp) Convert to hotplug state machine devicetree: hwmon: Add documentation for TMP108 driver. hwmon: Add Texas Instruments TMP108 temperature sensor driver. hwmon: (core) Simplify sysfs attribute name allocation hwmon: (core) Rename groups parameter in API to extra_groups hwmon: (core) Explain why at least two attribute groups are allocated hwmon: (core) Make is_visible callback truly mandatory hwmon: (core) Deprecate hwmon_device_register() hwmon: (core) Clarify use of chip attributes hwmon: (core) Add support for string attributes to new API ...
| * hwmon: Add Texas Instruments TMP108 temperature sensor driver.John Muir2016-12-091-0/+36
| | | | | | | | | | | | | | | | | | Add support for the TI TMP108 temperature sensor with some device configuration parameters. Signed-off-by: John Muir <john@jmuir.com> [groeck: Initialize of_match_table] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
| * hwmon: (core) Rename groups parameter in API to extra_groupsGuenter Roeck2016-12-091-11/+11
| | | | | | | | | | | | | | | | | | The 'groups' parameter of hwmon_device_register_with_info() and devm_hwmon_device_register_with_info() is only necessary if extra non-standard attributes need to be provided. Rename the parameter to extra_groups and clarify the documentation. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
| * hwmon: (core) Deprecate hwmon_device_register()Guenter Roeck2016-12-091-20/+14
| | | | | | | | | | | | | | | | | | | | | | Inform the user that hwmon_device_register() is deprecated, and suggest conversion to the newest API. Also remove hwmon_device_register() from the kernel API documentation. Note that hwmon_device_register() is not marked as __deprecated() since doing so might result in build errors. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
| * hwmon: (core) Clarify use of chip attributesGuenter Roeck2016-12-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Describing chip attributes as "attributes which apply to the entire chip" is confusing. Rephrase to "attributes which are not bound to a specific input or output". Also rename hwmon_chip_attr_templates[] to hwmon_chip_attrs[] to indicate that the respective strings strings are not templates but actual attribute names. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 18:31:44 +0000