summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot
Commit message (Collapse)AuthorAgeFilesLines
...
| | * | | | | | | ARM: dts: rockchip: Add 'arm,pl330-periph-burst' for dmacSugar Zhang2020-07-185-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch Add the quirk to specify to use burst transfer for better compatible and higher performance. Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Link: https://lore.kernel.org/r/1593439866-68459-1-git-send-email-sugar.zhang@rock-chips.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * | | | | | | ARM: dts: rockchip: Add marvell BT irq configAbhishek Pandit-Subedi2020-06-171-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Veyron Jaq and Mighty both use the Marvel 8897 WiFi+BT chip. Add wakeup and pinctrl block to devicetree so the btmrvl driver can correctly configure the wakeup interrupt. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200612130219.v2.1.I66864be898aa835ccb66b6cd5220d0b082338a81@changeid Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * | | | | | | ARM: dts: rockchip: rename label and nodename pinctrl subnodes that end with ↵Johan Jonker2020-06-1710-23/+23
| | |/ / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gpio A test with the command below gives for example this error: arch/arm/boot/dts/rk3288-tinker.dt.yaml: tsadc: otp-gpio: {'phandle': [[54]], 'rockchip,pins': [[0, 10, 0, 118]]} is not of type 'array' 'gpio' is a sort of reserved nodename and should not be used for pinctrl in combination with 'rockchip,pins', so change nodes that end with 'gpio' to end with 'pin' or 'pins'. make ARCH=arm dtbs_check DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/ dtschema/schemas/gpio/gpio.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20200524160636.16547-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| * | | | | | | ARM: dts: mmp3-dell-ariel: Enable the GPULubomir Rintel2020-07-221-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the 2D (GC300) and the 3D (GC2000) GPUs cores. Link: https://lore.kernel.org/r/20200718205019.184927-14-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | | | | | ARM: dts: mmp3: Add the GPULubomir Rintel2020-07-221-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's a GC2000 3D core accompanied by a GC300 2D core. Link: https://lore.kernel.org/r/20200718205019.184927-13-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | | | | | ARM: dts: mmp2-olpc-xo-1-75: Enable the GPULubomir Rintel2020-07-221-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the 3D + 2D (GC860) GPU core. Link: https://lore.kernel.org/r/20200718205019.184927-12-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | | | | | ARM: dts: mmp2: Add the GPULubomir Rintel2020-07-221-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's a GC860 2D + 3D core. Link: https://lore.kernel.org/r/20200718205019.184927-11-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | | | | | ARM: dts: mmp2-olpc-xo-1-75: Enable audio supportLubomir Rintel2020-07-221-18/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This enables the audio SRAM, DMA engine, I2S interface, and codec, hooks them together and adds a audio-graph-card instance. It also removes the jack gpios from the gpio-keys instance, because the audio jack driver registers an input device. Link: https://lore.kernel.org/r/20200718205019.184927-10-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | | | | | ARM: dts: mmp2: Add SSPA nodesLubomir Rintel2020-07-221-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two I2S-capable audio serial port blocks. Link: https://lore.kernel.org/r/20200718205019.184927-9-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | | | | | ARM: dts: mmp2: Add Audio Clock controllerLubomir Rintel2020-07-221-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This device generates the audio codec master clock and bit clock. Link: https://lore.kernel.org/r/20200718205019.184927-8-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | | | | | ARM: dts: mmp2: Add DMA nodesLubomir Rintel2020-07-221-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a 16-channel peripheral DMA controller along with two-channel audio DMA engines. Link: https://lore.kernel.org/r/20200718205019.184927-7-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | | | | | ARM: dts: mmp2: Add Audio SRAMLubomir Rintel2020-07-221-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This memory is region is where the two-channel audio DMA can pump sound samples into the SSPA's internal FIFO. Link: https://lore.kernel.org/r/20200718205019.184927-6-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | | | | | ARM: dts: mmp2: Extend the MPMU reg rangeLubomir Rintel2020-07-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ACGR register is at the offset of 0x1024, beyond the 4k originally assigned to the MPMU range. Link: https://lore.kernel.org/r/20200718205019.184927-5-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | | | | | ARM: dts: mmp2: Add #power-domain-cells to /clocksLubomir Rintel2020-07-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The power management unit, described by the soc_clocks node, controls the power to the peripherals by the means of power domains with a single cell -- the domain number. Link: https://lore.kernel.org/r/20200718205019.184927-4-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | | | | | ARM: dts: mmp2-olpc-xo-1-75: Delete #address-cells from ssp3Lubomir Rintel2020-07-221-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On the XO-1.75, this node represents a bus interface that operates in slave mode and thus is only able to accommodate a single subnode; no address cells are necessary. The Documentation/devicetree/bindings/spi/spi-controller.yaml binding prefers that we drop the property instead of setting it to zero. This fixes a DT validation error: arch/arm/boot/dts/mmp2-olpc-xo-1-75.dt.yaml: spi@d4037000: { ... } is valid under each of {'required': ['spi-slave']}, {'required': ['#address-cells']} We also need to drop #size-cells: arch/arm/boot/dts/mmp2-olpc-xo-1-75.dt.yaml: spi@d4037000: '#address-cells' is a dependency of '#size-cells' Link: https://lore.kernel.org/r/20200718205019.184927-3-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | | | | | ARM: dts: mmp2-olpc-xo-1-75: Fix camera I2C node validationLubomir Rintel2020-07-221-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mmp2-olpc-xo-1-75.dt.yaml: camera_i2c: $nodename:0: 'camera_i2c' does not match '^i2c(@.*)?' mmp2-olpc-xo-1-75.dt.yaml: camera_i2c: 'sda-gpios' is a required property mmp2-olpc-xo-1-75.dt.yaml: camera_i2c: 'scl-gpios' is a required property The "gpios" property actually was documented as deprecated, but got dropped in commit 0175ce4a58d6 ("dt-bindings: i2c: Convert i2c-gpio binding to json-schema"). It's probably best kept forgotten though. Link: https://lore.kernel.org/r/20200718205019.184927-2-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | | | | | Merge tag 'ux500-dts-for-v5.9-1' of ↵Arnd Bergmann2020-07-225-5/+62
| |\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt Ux500 DTS changes for the v5.9 kernel series: - Add touchkey to the Samsung Golden. - Fix up the supply nodes for the AB8500 PWM devices. - Fix up the cache controller node names. - Fix the Samsing Skomer accelerometer mounting matrix. * tag 'ux500-dts-for-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: dts: ux500-skomer: Correct accel mounting matrix ARM: dts: ste: Align L2 cache-controller nodename with dtschema ARM: dts: ux500: Supply nodes for the other 2 AB8500 PWM devices ARM: dts: ux500: samsung-golden: Add touchkey Link: https://lore.kernel.org/r/CACRpkdZZgZ1LeOK5zFj5Z6Mh=RVz37hZ-7Z4DQNGC1uaiEVTeA@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * | | | | | | ARM: dts: ux500-skomer: Correct accel mounting matrixLinus Walleij2020-07-201-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This corrects the mounting matrix for the BMA254 accelerometer to what makes PostmarketOS actually orient the screen the right way on this device. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20200719201603.3610389-1-linus.walleij@linaro.org
| | * | | | | | | ARM: dts: ste: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski2020-07-072-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix dtschema validator warnings like: l2-cache: $nodename:0: 'l2-cache' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200626080552.3627-1-krzk@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| | * | | | | | | ARM: dts: ux500: Supply nodes for the other 2 AB8500 PWM devicesLee Jones2020-07-071-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As per 'struct mfd_cell ab8500_devs[]' there are not 1, but 3 PWM devices on the AB8500. Until now, each of them have referenced the same Device Tree node. This change ensures each device has their own. Due to recent `dtc` checks [0], nodes cannot share the same node name, so we are forced to rename the affected nodes by appending their associated numeric 'bank ID'. [0] ste-ab8500.dtsi:210.16-214.7: ERROR (duplicate_node_names): /soc/prcmu@80157000/ab8500/ab8500-pwm: Duplicate node name Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200622083432.1491715-1-lee.jones@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| | * | | | | | | ARM: dts: ux500: samsung-golden: Add touchkeyNick Reitemeyer2020-07-071-0/+45
| | |/ / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds support for the back and menu keys on golden. Signed-off-by: Nick Reitemeyer <nick.reitemeyer@web.de> Tested-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20200621193822.133683-2-nick.reitemeyer@web.de Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | | | | | Merge tag 'stm32-dt-for-v5.9-1' of ↵Arnd Bergmann2020-07-2217-94/+496
| |\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.9, round 1 Highlights: ---------- MCU part: -Enable stmpe811 on stm32f429 -Enable l3gd20-gyro on stm32f429 -Enable panel-ilitek-9341 on stm32f429 -Fixes for yaml validation (leds, nodes names, remove useless bindings ...) -Add stm32xxx compatibles for syscon nodes MPU part: -Add support for usb role switch to dwc2 -Add stm32xxx compatibles for syscon nodes -Update uart4 pin configuration for low power mode used by dkx and ed1 ST boards -Fix uart nodes ordering and uart7_pins_a comments -Add the support of uart instances available on STM32MP157 boards: - usart3 on stm32mp157c-ev1, stm32mp157a-dk1, and stm32mp157c-dk2 - uart7 on stm32mp157a-dk1 and stm32mp157c-dk2 - usart2 on stm32mp157c-dk2 -Configure I2C5 on stm32mp15 DK boards * tag 'stm32-dt-for-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (38 commits) ARM: dts: stm32: enable usb-role-switch on USB OTG on stm32mp15xx-dkx ARM: dts: stm32: Add compatibles for syscon for stm32mp151 ARM: dts: stm32: Add compatibles for syscon for stm32h743 ARM: dts: stm32: Add compatibles for syscon for stm32f746 ARM: dts: stm32: Add compatibles for syscon for stm32f426 dt-bindings: arm: stm32: Add compatibles for syscon nodes ARM: dts: stm32: Fix spi4 pins in stm32mp15-pinctrl ARM: dts: stm32: configure i2c5 support on stm32mp15xx-dkx ARM: dts: stm32: add usart2 node to stm32mp157c-dk2 ARM: dts: stm32: add uart7 support to stm32mp15xx-dkx boards ARM: dts: stm32: add usart3 node to stm32mp157c-ev1 ARM: dts: stm32: add usart3 node to stm32mp15xx-dkx boards ARM: dts: stm32: add usart2, usart3 and uart7 pins in stm32mp15-pinctrl ARM: dts: stm32: cosmetic updates in stm32mp15-pinctrl ARM: dts: stm32: fix uart7_pins_a comments in stm32mp15-pinctrl ARM: dts: stm32: fix uart nodes ordering in stm32mp15-pinctrl ARM: dts: stm32: Update UART4 pin states on stm32mp15xx-dkx ARM: dts: stm32: Update pin states for uart4 on stm32mp157c-ed1 ARM: dts: stm32: update uart4 pin configuration for low power on stm32mp157 dt-bindings: usb: dwc2: Fix issues for stm32mp15x SoC ... Link: https://lore.kernel.org/r/8a9bb27b-fc08-126a-11f7-01354e8577e1@st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * | | | | | | ARM: dts: stm32: enable usb-role-switch on USB OTG on stm32mp15xx-dkxAmelie Delaunay2020-07-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that USB OTG driver supports usb role switch by overriding PHY input signals (A-Valid, B-Valid and Vbus-Valid), enable it on stm32mp15xx-dkx. dr_mode needn't to be forced to Peripheral anymore, it is set to OTG in SoC device tree. USB role (USB_ROLE_NONE, USB_ROLE_DEVICE, USB_ROLE_HOST) will be provided by STUSB1600 Type-C controller driver. This patch depends on "Add STUSB160x Type-C port controller support" series, which is under review. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| | * | | | | | | ARM: dts: stm32: Add compatibles for syscon for stm32mp151Benjamin Gaignard2020-07-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Syscon nodes needs at least 2 compatibles to be compliant why yaml documentation. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| | * | | | | | | ARM: dts: stm32: Add compatibles for syscon for stm32h743Benjamin Gaignard2020-07-211-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Syscon nodes needs at least 2 compatibles to be compliant why yaml documentation. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| | * | | | | | | ARM: dts: stm32: Add compatibles for syscon for stm32f746Benjamin Gaignard2020-07-211-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Syscon nodes needs at least 2 compatibles to be compliant why yaml documentation. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| | * | | | | | | ARM: dts: stm32: Add compatibles for syscon for stm32f426Benjamin Gaignard2020-07-211-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Syscon nodes needs at least 2 compatibles to be compliant why yaml documentation. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| | * | | | | | | ARM: dts: stm32: Fix spi4 pins in stm32mp15-pinctrlPatrick Delaunay2020-07-211-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move spi4_pins_a nodes from pinctrl_z to pinctrl as the associated pins are not in BANK Z. Fixes: 498a7014989d ("ARM: dts: stm32: Add missing pinctrl entries for STM32MP15") Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| | * | | | | | | ARM: dts: stm32: configure i2c5 support on stm32mp15xx-dkxFabrice Gasnier2020-07-211-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Configure I2C5 on stm32mp15 DK boards. It's available and can be used on: - Arduino connector - GPIO expansion connector Keep it disabled by default, so the pins are kept in their initial state to lower power consumption. This way they can also be used as GPIO. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alain Volmat <alain.volmat@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| | * | | | | | | ARM: dts: stm32: add usart2 node to stm32mp157c-dk2Erwan Le Ray2020-07-211-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds the usart2 node to stm32mp157c-dk2 board. usart2 pins are connected to Bluetooth component. usart2 is disabled by default. Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| | * | | | | | | ARM: dts: stm32: add uart7 support to stm32mp15xx-dkx boardsErwan Le Ray2020-07-213-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds uart7 node to stm32mp15xx-dkx and uart7 alias to stm32mp157a-dk1 and stm32mp157c-dk2 boards. uart7 pins are connected to Arduino connector. uart7 is disabled by default. Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| | * | | | | | | ARM: dts: stm32: add usart3 node to stm32mp157c-ev1Erwan Le Ray2020-07-211-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds the usart3 node to stm32mp157c-ev1 board. usart3 pins are connected to GPIO Expansion connector. usart3 is disabled by default. Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| | * | | | | | | ARM: dts: stm32: add usart3 node to stm32mp15xx-dkx boardsErwan Le Ray2020-07-213-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds usart3 node to stm32mp15xx-dkx and usart3 alias to stm32mp157a-dk1 and stm32mp157c-dk2 boards. usart3 pins are connected to GPIO Expansion connector. usart3 is disabled by default. Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| | * | | | | | | ARM: dts: stm32: add usart2, usart3 and uart7 pins in stm32mp15-pinctrlErwan Le Ray2020-07-211-0/+138
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds usart2_pins_c, usart3_pins_b, usart3_pins_c and uart7_pins_c pins configurations in stm32mp15-pinctrl. - usart2_pins_c pins are connected to Bluetooth chip on dk2 board. - usart3_pins_b pins are connected to GPIO expansion connector on evx board. - usart3_pins_c pins are connected to GPIO expansion connector on dkx board. - uart7_pins_c pins are connected to Arduino Uno connector on dkx board. Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| | * | | | | | | ARM: dts: stm32: cosmetic updates in stm32mp15-pinctrlPatrick Delaunay2020-07-211-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use tabs where possible and remove multiple blanks lines. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| | * | | | | | | ARM: dts: stm32: fix uart7_pins_a comments in stm32mp15-pinctrlErwan Le Ray2020-06-151-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix uart7_pins_a comments to indicate UART7 pins instead of UART4 pins. Fixes: bf4b5f379fed ("ARM: dts: stm32: Add missing pinctrl definitions for STM32MP157") Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| | * | | | | | | ARM: dts: stm32: fix uart nodes ordering in stm32mp15-pinctrlErwan Le Ray2020-06-151-61/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix usart and uart nodes ordering. Several usart nodes didn't respect expecting ordering. Fixes: 077e0638fc83 ("ARM: dts: stm32: Add alternate pinmux for USART2 pins on stm32mp15") Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| | * | | | | | | ARM: dts: stm32: Update UART4 pin states on stm32mp15xx-dkxErwan Le Ray2020-06-151-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add sleep and idle states to uart4 pin configuration. Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| | * | | | | | | ARM: dts: stm32: Update pin states for uart4 on stm32mp157c-ed1Erwan Le Ray2020-06-151-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add sleep and idle states to uart4 pin configuration. Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| | * | | | | | | ARM: dts: stm32: update uart4 pin configuration for low power on stm32mp157Erwan Le Ray2020-06-151-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sleep pin configuration is refined for low power modes: - "sleep" (no wakeup & console suspend enabled): put pins in analog state to optimize power - "idle" (wakeup capability): keep Rx pin in alternate function Signed-off-by: Bich Hemon <bich.hemon@st.com> Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| | * | | | | | | ARM: dts: stm32: update led nodes names for stm32f746-evalBenjamin Gaignard2020-06-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update led nodes names to be aligned with yaml description Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| | * | | | | | | ARM: dts: stm32: Add missing #address and #size cells on spi node for stm32mp151Benjamin Gaignard2020-06-151-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the missing #address-cells and #size-cells to spi node. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| | * | | | | | | ARM: dts: stm32: Update nodes names for stm32h743 pinctrlBenjamin Gaignard2020-06-151-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the nodes names to be aligned with yaml description Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| | * | | | | | | ARM: dts: stm32: remove useless interrupt-names property on stm32f743Benjamin Gaignard2020-06-151-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Driver doesn't use interrupt's name to get it so remove it from the node. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| | * | | | | | | ARM: dts: stm32: update led nodes names for stm32f746-evalBenjamin Gaignard2020-06-151-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update led nodes names to be aligned with yaml description Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| | * | | | | | | ARM: dts: stm32: update led nodes names for stm32f769-discoBenjamin Gaignard2020-06-151-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update led nodes names to be aligned with yaml description Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| | * | | | | | | ARM: dts: stm32: update led nodes names for stm32f429-evalBenjamin Gaignard2020-06-151-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update led nodes names to be aligned with yaml description Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| | * | | | | | | ARM: dts: stm32: remove useless interrupt-names property on stm32f746Benjamin Gaignard2020-06-151-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Driver doesn't use interrupt's name to get it so remove it from the node. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| | * | | | | | | ARM: dts: stm32: update led nodes names for stm32f469-discoBenjamin Gaignard2020-06-151-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update led nodes names to be aligned with yaml description Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| | * | | | | | | ARM: dts: stm32: update led nodes names for stm32f249-discoBenjamin Gaignard2020-06-151-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update led nodes names to be aligned with yaml description Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-04-24 11:12:34 +0000