summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-at91/at91sam9260_devices.c
Commit message (Collapse)AuthorAgeFilesLines
* [ARM] 5390/1: AT91: Watchdog fixesAndrew Victor2009-02-141-1/+1
| | | | | | | | | | | | | | | | | The recently merged AT91SAM9 watchdog driver uses the AT91SAM9X_WATCHDOG config variable, whereas the original version of the driver (and the platform support code) used AT91SAM9_WATCHDOG. This causes the watchdog platform_device to never be registered, and therefore the driver not to be initialized. This patch: - updates the platform support code to use AT91SAM9X_WATCHDOG. - includes <linux/io.h> to fix compile error (same fix as was applied to at91rm9200_wdt.c) - fixes comment regarding watchdog clock-rates in at91rm9200. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 5288/1: [AT91] Remove SMC configuration from devices.c filesAndrew Victor2008-12-011-37/+1
| | | | | | | | | | | | | In at91_add_device_nand(), do not configure the Static Memory controller with specific timing values. The *_devices.c files are board independent, and the SMC timing values are specific to the NAND devices that are installed on the board. The board-specific files are now responsible for configuring the Static Memory controller (if the don't want to leave it up to a bootloader). Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King2008-08-071-6/+6
| | | | | | This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Fix rename of at91_nand -> atmel_nandPieter du Preez2008-08-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Structs called at91_nand_data where renamed to atmel_nand_data and configs called *MTD_NAND_AT91* where renamed to *MTD_NAND_ATMEL*. This was unfortunately not done consistently, causing NAND chips not being initialised on several ARM boards. I am aware that the author of the original change did not rename MTD_NAND_AT91_BUSWIDTH to MTD_NAND_ATMEL_BUSWIDTH, for example. All *MTD_NAND_AT91* where renamed to *MTD_NAND_ATMEL* in order to keep naming consistency. This patch was only tested on a MACH_SAM9_L9260, as this is the only ARM board I have to my disposal. Before this patch: $ git-ls-files |xargs grep atmel_nand |wc -l 105 $ git-ls-files |xargs grep at91_nand |wc -l 4 $ git-ls-files |xargs grep MTD_NAND_ATMEL |wc -l 8 $ git-ls-files |xargs grep MTD_NAND_AT91 |wc -l 47 After this patch: $ git-ls-files |xargs grep atmel_nand |wc -l 109 $ git-ls-files |xargs grep at91_nand |wc -l 0 $ git-ls-files |xargs grep MTD_NAND_ATMEL |wc -l 55 $ git-ls-files |xargs grep MTD_NAND_AT91 |wc -l 0 Signed-off-by: Pieter du Preez <pdupreez@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* Merge branch 'linux-next' of git://git.infradead.org/~dedekind/ubi-2.6David Woodhouse2008-07-251-11/+33
|\
| * [ARM] 5130/4: Support for the at91sam9g20sedji gaouaou2008-07-101-11/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC. AT91sam9g20 is an evolution of the at91sam9260 with a faster clock speed. We created a new board for this device but based the chip support directly on 9260 files with little updates. Here is the chip page on Atmel wabsite: http://atmel.com/dyn/products/product_card.asp?part_id=4337 Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com> Signed-off-by: Justin Waters <justin.waters@timesys.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] at91: Fix NAND FLASH timings for at91sam9x evaluation kits.Patrice Vilchez2008-07-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | New timings are based on application note "NAND Flash Support on AT91SAM9 Microcontrollers" available at http://atmel.com/dyn/resources/prod_documents/doc6255.pdf). Signed-off-by: Patrice Vilchez <patrice.vilchez@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | [MTD] [NAND] rename at91_nand -> atmel_nand: internal symbolsHåvard Skinnemoen2008-06-071-4/+4
|/ | | | | | | This is basically s/at91_nand/atmel_nand/g with some manual inspection. Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [ARM] 4982/1: [AT91] Drop old-style UART initialization (Part 1)Andrew Victor2008-04-171-59/+4
| | | | | | | | | | | | | | | | All the SAM9 boards supported by mainline and the AT91 patches have been converted to the new-style UART initialization. Therefore drop support for the old at91_init_serial() interface for SAM9. at91_uarts[] array can also be marked as __initdata. The warning that no serial-console is defined moved from at91_set_serial_console() to at91_add_device_serial() since the whole point is the board-specific file is not calling at91_set_serial_console(). Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4909/1: [AT91] Timer/Counter Block platform_devicesAndrew Victor2008-04-041-0/+85
| | | | | | | | | | Register platform_devices for the Timer/Counter Block peripherals found on the AT91RM9200, SAM9 & CAP9 processors. Original patch from David Brownell. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4908/1: [AT91] RTT platform_device fixAndrew Victor2008-04-041-1/+1
| | | | | | | | | | | | | The RTT-as-RTC driver will search for the user-specified RTT peripheral via ID number (0 .. 1). Therefore if the processor only contains a single RTT peripheral, we need to set its platform_device.id to "0" instead of "-1". Also add the missing platform_device resource for the CAP9 processor. Bug reported by Sedji Gaouaou. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4904/1: [AT91] Pass ECC controller to NAND driverAndrew Victor2008-04-041-1/+6
| | | | | | | | On AT91 processors that include an ECC controller, pass its base address to the NAND driver via platform_device resources. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4902/1: [AT91] SAM9/CAP9 memory controller headerAndrew Victor2008-04-041-1/+1
| | | | | | | | | | | | | | The AT91CAP9 processor includes the same Static Memory Controller (SMC) peripheral as the SAM9 processors, but replaces the SDRAM Controller with a DDR/SDR Controller (DDRSDRC). This patch splits the existing include/asm-arm/arch-at91/at91sam926x_mc.h into at91sam9_sdramc.h and at91sam9_smc.h. It also adds an at91cap9_ddrsdr.h for the DDRSDRC controller. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4758/1: [AT91] LEDsAndrew Victor2008-01-261-22/+0
| | | | | | | | | | | Move the LED initialization code out of the various *_devices.c files, and into leds.c. Also add support for NEW_LEDs. Patch from David Brownell. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4757/1: [AT91] UART initializationAndrew Victor2008-01-261-18/+97
| | | | | | | | | | | | | | | | Modify the UART initialization to allow the board-initialization code to specify which pins are connected, and which pins should therefore be initialized. The current at91_init_serial() will continue to work as-is, but is marked as "deprecated" and will be removed once the board-specific files has been updated to use the new interface. As in the AVR32 code, we assume that the TX and RX pins will always be initialized. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4755/1: [AT91] NAND updateAndrew Victor2008-01-261-2/+2
| | | | | | | | | | | | Map the complete memory region (SZ_256M) as is done on the other AT91 processors. The SMC_SMARTMEDIA bit should be set in the EBI controller to enable the hardware NAND logic. (Patch from Sascha Erlacher) Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4754/1: [AT91] SSC library supportAndrew Victor2008-01-261-0/+79
| | | | | | | | | | Core support of the Atmel SSC library for all Atmel AT91 processors. Based on David Brownell's initial patch for the AT91RM9200. Signed-off-by: Andrew Victor <linux@maxim.org.za> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4753/1: [AT91] Use DMA_BIT_MASKAndrew Victor2008-01-261-24/+46
| | | | | | | | | Replace hard-coded DMA mask (0xffffffff) with DMA_BIT_MASK(32) as defined in dma-mapping.h. Set "dma_mask" field for the UART platform_devices. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4752/1: [AT91] RTT, RTC and WDT peripherals on SAM9Andrew Victor2008-01-261-0/+47
| | | | | | | | | | | | | | | | | | Add platform_device and initialization for the RTT (Real Time Timer) and WDT (Watchdog) integrated in the Atmel AT91SAM9 processors. For SAM9263, register both RTT peripherals. [From: David Brownell <dbrownell@users.sourceforge.net>] Provide platform_resources for RTT peripherals [From: David Brownell <dbrownell@users.sourceforge.net>] Add support for RTC peripheral on AT91SAM9RL (same RTC peripherals as AT91RM9200) [From: David Brownell <dbrownell@users.sourceforge.net>] Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4650/1: AT91: New-style init of I2C, support for i2c-gpioAndrew Victor2007-11-261-3/+39
| | | | | | | | | | | | | | | | | The AT91 I2C driver is currently marked as "broken" due to hardware issues. This patch enables AT91-based platforms to also use the bitbanged GPIO for I2C. This updates platform setup logic (setting up an i2c-gpio device using the same pins as the i2c-at91 device, unless only the BROKEN driver is enabled). Also make use of the new-style initialization of I2C devices using i2c_register_board_info(). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4372/1: Define byte sizes in asm-arm/sizes.hAndrew Victor2007-05-111-3/+0
| | | | | | | | | | Define SZ_512, SZ_256 and SZ_16 in asm-arm/sizes.h. Remove the definitions from the at91*_devices.c files. (Dependent on ARM patch #4370/2) Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4289/1: AT91: SAM9260 NAND flash timingAndrew Victor2007-03-291-4/+4
| | | | | | | | | | | | Fix the NAND flash timings on the AT91SAM9260. The current timings lead to the detection of a number of bad blocks. These timings are now set the same as on the AT91SAM9263. Patch from Nicolas Ferre. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4150/1: AT91: LED updateAndrew Victor2007-02-081-0/+4
| | | | | | | | | | The GPIO pin setup should be handed by the platform-setup code, and not directly by the driver. Original patch from David Brownell. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4143/1: AT91: Prepare for AT91SAM9263 supportAndrew Victor2007-02-081-2/+2
| | | | | | | | | | | | | | | | | | | | | The Atmel AT91SAM9263 processor includes many more integrated peripherals than Atmel's previous ARM9-based AT91 processors, so this has necessitated a few changes to the core AT91 support. These changes are: * The system peripheral I/O region we remap has increased from 0xFFFA0000..0xFFFFFFFF to 0xFFF78000..0xFFFFFFFF. * The increased I/O region forces changes to entry-macro.S and debug-macro.S due to ARM's limited immediate offset addressing modes. * Maximum number of GPIO banks increases to 5. * 2 MMC controllers so the board-setup code needs to specify which controller it wishes to use when calling at91_add_device_mmc(). Original patch from Nicolas Ferre. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4124/1: Rename mach-at91rm9200 and arch-at91rm9200 directoriesAndrew Victor2007-02-081-0/+867
Now that Linux includes support for the Atmel AT91SAM9260 and AT91SAM9261 processors in addition to the original Atmel AT91RM9200 (with support for more AT91 processors pending), the "mach-at91rm9200" and "arch-at91rm9200" directories should be renamed to indicate their more generic nature. The following git commands should be run BEFORE applying this patch: git-mv arch/arm/mach-at91rm9200 arch/arm/mach-at91 git-mv include/asm-arm/arch-at91rm9200 include/asm-arm/arch-at91 Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 18:05:22 +0000