summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-sunxi
Commit message (Collapse)AuthorAgeFilesLines
* ARM: sunxi: Support the Nextthing GR8Maxime Ripard2016-09-081-0/+1
| | | | | | | | | | | The GR8 is an SoC made by Nextthing Co, loosely based on the sun5i family. It has a number of new controllers compared to the A10s and A13 (SPDIF, I2S), but some controllers missing too (Ethernet, less I2C, less UARTs). Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sunxi: enable big-endianMichael Weiser2016-08-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | With previous fixes to stmmac, sun4i-emac and sun4i-mmc at least the Cubieboard2 incarnation of sunxi works correctly in big-endian mode. Allow the selection of big-endian. Tested using a Cubieboard2 DualCard and the following hardware-components: - GMAC (stmmac) - EMAC (sun4i-emac) - SATA - SPI - UART - security system - touchscreen controller hwmon functionality - pinctrl (custom interrupt for SPI ethernet controller) - watchdog as reset controller - onboard RTC - DS1307 I2C RTC - sound codec and with this indirectly the DMA engine Signed-off-by: Michael Weiser <michael.weiser@gmx.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIBLinus Walleij2016-06-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | This replaces: - "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can now be selected directly. - "select ARCH_WANT_OPTIONAL_GPIOLIB" with no dependency: GPIOLIB is now selectable by everyone, so we need not declare our intent to select it. When ordering the symbols the following rationale was used: if the selects were in alphabetical order, I moved select GPIOLIB to be in alphabetical order, but if the selects were not maintained in alphabetical order, I just replaced "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB". Cc: Michael Büsch <m@bues.ch> Cc: arm@kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
* cpufreq: sunxi: Use generic platdev driverViresh Kumar2016-04-251-9/+0
| | | | | | | | | The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform device now, reuse that and remove similar code from platform code. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* ARM: sunxi: Introduce Allwinner for A83T supportVishnu Patekar2016-02-051-0/+1
| | | | | | | | | | | | | | Allwinner A83T is octa-core cortex-a7 based SoC. It's clock control unit and prcm, pinmux are different from previous sun8i series. Its processor cores are arragned in two clusters 4 cores each, similar to A80. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> [maxime: Removed the clock protection code] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: use "depends on" for SoC configs instead of "if" after promptMasahiro Yamada2015-12-011-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many ARM sub-architectures use prompts followed by "if" conditional, but it is wrong. Please notice the difference between config ARCH_FOO bool "Foo SoCs" if ARCH_MULTI_V7 and config ARCH_FOO bool "Foo SoCs" depends on ARCH_MULTI_V7 These two are *not* equivalent! In the former statement, it is not ARCH_FOO, but its prompt that depends on ARCH_MULTI_V7. So, it is completely valid that ARCH_FOO is selected by another, but ARCH_MULTI_V7 is still disabled. As it is not unmet dependency, Kconfig never warns. This is probably not what you want. The former should be used only when you need to do so, and you really understand what you are doing. (In most cases, it should be wrong!) For enabling/disabling sub-architectures, the latter is always correct. As a good side effect, this commit fixes some entries over 80 columns (mach-imx, mach-integrator, mach-mbevu). [Arnd: I note that there is not really a bug here, according to the discussion that followed, but I can see value in being consistent and in making the lines shorter] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Jun Nie <jun.nie@linaro.org> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Krzysztof Halasa <khc@piap.pl> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* ARM: use const and __initconst for smp_operationsMasahiro Yamada2015-12-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | These smp_operations structures are not over-written, so add "const" qualifier and replace __initdata with __initconst. Also, add "static" where it is possible. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> # qcom part Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Wei Xu <xuwei5@hisilicon.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Merge tag 'armsoc-soc' of ↵Linus Torvalds2015-11-101-1/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "New and/or improved SoC support for this release: Marvell Berlin: - Enable standard DT-based cpufreq - Add CPU hotplug support Freescale: - Ethernet init for i.MX7D - Suspend/resume support for i.MX6UL Allwinner: - Support for R8 chipset (used on NTC's $9 C.H.I.P board) Mediatek: - SMP support for some platforms Uniphier: - L2 support - Cleaned up SMP support, etc. plus a handful of other patches around above functionality, and a few other smaller changes" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits) ARM: uniphier: rework SMP operations to use trampoline code ARM: uniphier: add outer cache support Documentation: EXYNOS: Update bootloader interface on exynos542x ARM: mvebu: add broken-idle option ARM: orion5x: use mac_pton() helper ARM: at91: pm: at91_pm_suspend_in_sram() must be 8-byte aligned ARM: sunxi: Add R8 support ARM: digicolor: select pinctrl/gpio driver arm: berlin: add CPU hotplug support arm: berlin: use non-self-cleared reset register to reset cpu ARM: mediatek: add smp bringup code ARM: mediatek: enable gpt6 on boot up to make arch timer working soc: mediatek: Fix random hang up issue while kernel init soc: ti: qmss: make acc queue support optional in the driver soc: ti: add firmware file name as part of the driver Documentation: dt: soc: Add description for knav qmss driver ARM: S3C64XX: Use PWM lookup table for mach-smartq ARM: S3C64XX: Use PWM lookup table for mach-hmt ARM: S3C64XX: Use PWM lookup table for mach-crag6410 ARM: S3C64XX: Use PWM lookup table for smdk6410 ...
| * ARM: sunxi: Add R8 supportMaxime Ripard2015-10-171-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The R8 is a new Allwinner SoC based on the A13. While both are very similar, there's still a few differences. Introduce a new compatible to deal with them. In order to have a consistent naming, instead of mentioning the Allwinner A series as the machine name, switch to sun4i/sun5i like what is done for the other families. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
* | clocksource: cosmetic: Drop OF 'dependency' from symbolsMarc Zyngier2015-10-011-1/+1
|/ | | | | | | | | | | | | Seeing the 'of' characters in a symbol that is being called from ACPI seems to freak out people. So let's do a bit of pointless renaming so that these folks do feel at home. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* Merge tag 'sunxi-late-for-4.2' of ↵Kevin Hilman2015-07-092-2/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes Merge "Allwinner late changes for 4.2" from Maxime Ripard: Allwinner late changes for 4.2 A bunch of defconfig changes, and some patches to make the Allwinner H3 and A33 boot properly. * tag 'sunxi-late-for-4.2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: sunxi: Enable simplefb in the defconfig ARM: Remove deprecated symbol from defconfig files ARM: sunxi: Add Machine support for A33 ARM: sunxi: Introduce Allwinner H3 support Documentation: sunxi: Update Allwinner SoC documentation
| * ARM: sunxi: Add Machine support for A33Vishnu Patekar2015-07-051-0/+1
| | | | | | | | | | | | | | | | | | | | Add machine support for the Allwinner A33 quad core cortex-a7 based SoC, which is similar to the A23 SoC. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Chen-Yu Tsai <wens@csie.org>
| * ARM: sunxi: Introduce Allwinner H3 supportJens Kuske2015-07-052-2/+4
| | | | | | | | | | | | | | | | The Allwinner H3 is a quad-core Cortex-A7-based SoC. It is very similar to other sun8i family SoCs like the A23. Signed-off-by: Jens Kuske <jenskuske@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* | ARM: sun8i: Add SMP support for the Allwinner A23Chen-Yu Tsai2015-04-271-0/+69
|/ | | | | | | | | The A23 is a dual Cortex-A7. Add the logic to use the IPs used to control the CPU configuration and the CPU power so that we can bring up secondary CPUs at boot. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sunxi: Have ARCH_SUNXI select RESET_CONTROLLER for clock driver usageChen-Yu Tsai2015-02-231-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | As the sunxi usb clocks all contain a reset controller, it is not possible to build the sunxi clock driver without RESET_CONTROLLER enabled. Doing so results in an undefined symbol error: drivers/built-in.o: In function `sunxi_gates_clk_setup': linux/drivers/clk/sunxi/clk-sunxi.c:1071: undefined reference to `reset_controller_register' This is possible if building a minimal kernel without PHY_SUN4I_USB. The dependency issue is made visible at compile time instead of link time by the new A80 mmc clocks, which also use a reset control itself. This patch makes ARCH_SUNXI select ARCH_HAS_RESET_CONTROLLER and RESET_CONTROLLER. Fixes: 559482d1f950 ARM: sunxi: Split the various SoCs support in Kconfig Cc: <stable@vger.kernel.org> # 3.16+ Reported-by: Lourens Rozema <ik@lourensrozema.nl> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sunxi: Register cpufreq-dt for sun[45678]iChen-Yu Tsai2015-01-071-0/+10
| | | | | | | | | On sun[45678]i, we have one cluster of identical cores sharing a clock, which is ideal for using cpufreq-dt. Register a platform device for cpufreq-dt. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sunxi: Add "allwinner,sun6i-a31s" to mach-sunxiHans de Goede2015-01-052-1/+2
| | | | | | | | | | So far the A31s is 100% compatible with the A31, still lets do the same as what we've done for the A13 / A10s and give it its own compatible string, in case we need to differentiate later. Signed-off-by: Hans de Goede <hdegoede@redhat.com> [Maxime: Removed unusude CPU_OF_DECLARE_METHOD] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sunxi: make sun6i SMP ops staticEmilio López2014-11-161-1/+1
| | | | | | | | The sun6i SMP ops are currently not marked as static, as reported by sparse. Let's mark it as such. Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sunxi: Select ARCH_HAS_RESET_CONTROLLER and RESET_CONTROLLER for sun9iChen-Yu Tsai2014-10-201-0/+2
| | | | | | | The A80 SoC has reset controls matching bus clock gates. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sunxi: Introduce Allwinner A80 supportChen-Yu Tsai2014-10-202-0/+14
| | | | | | | | | | The Allwinner A80 is a new Cortex octo-core A7/A15 big.LITTLE SoC. While it's processor cores and interconnecting bus are new, it re-uses many peripherals found in earlier Allwinner SoCs. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Andreas Färber <afaerber@suse.de>
* ARM: sunxi: Remove sun4i reboot code from mach directoryMaxime Ripard2014-09-111-76/+0
| | | | | | | | | | Now that the restart code has been merged in the watchdog driver, we don't need the restart code in the mach-sunxi directory anymore. Remove it entirely. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Merge tag 'soc-for-3.17' of ↵Linus Torvalds2014-08-082-0/+17
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "This is the bulk of new SoC enablement and other platform changes for 3.17: - Samsung S5PV210 has been converted to DT and multiplatform - Clock drivers and bindings for some of the lower-end i.MX 1/2 platforms - Kirkwood, one of the popular Marvell platforms, is folded into the mvebu platform code, removing mach-kirkwood - Hwmod data for TI AM43xx and DRA7 platforms - More additions of Renesas shmobile platform support - Removal of plat-samsung contents that can be removed with S5PV210 being multiplatform/DT-enabled and the other two old platforms being removed New platforms (most with only basic support right now): - Hisilicon X5HD2 settop box chipset is introduced - Mediatek MT6589 (mobile chipset) is introduced - Broadcom BCM7xxx settop box chipset is introduced + as usual a lot other pieces all over the platform code" * tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (240 commits) ARM: hisi: remove smp from machine descriptor power: reset: move hisilicon reboot code ARM: dts: Add hix5hd2-dkb dts file. ARM: debug: Rename Hi3716 to HIX5HD2 ARM: hisi: enable hix5hd2 SoC ARM: hisi: add ARCH_HISI MAINTAINERS: add entry for Broadcom ARM STB architecture ARM: brcmstb: select GISB arbiter and interrupt drivers ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs ARM: configs: enable SMP in bcm_defconfig ARM: add SMP support for Broadcom mobile SoCs Documentation: arm: misc updates to Marvell EBU SoC status Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC ARM: mvebu: fix build without platforms selected ARM: mvebu: add cpuidle support for Armada 38x ARM: mvebu: add cpuidle support for Armada 370 cpuidle: mvebu: add Armada 38x support cpuidle: mvebu: add Armada 370 support cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7 ARM: mvebu: export the SCU address ...
| * Merge tag 'exynos-cpuidle' of ↵Olof Johansson2014-07-191-0/+77
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc Merge "Samsung exynos cpuidle update for v3.17" from Kukjin Kim: - add callbacks exynos_suspend() and exynos_powered_up() for support cpuidle through mcpm - skip exynos_cpuidle for exynos5420 because is uses cpuidle-big-liggle generic cpuidle driver - add generic functions to calculate cpu number is used for pmu and this is required for exynos5420 multi-cluster - add of_device_id structure for big.LITTLE cpuidle and add "samsung,exynos5420" compatible string for exynos5420 * tag 'exynos-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: populate suspend and powered_up callbacks for mcpm ARM: EXYNOS: do not allow cpuidle registration for exynos5420 cpuidle: big.LITTLE: init driver for exynos5420 cpuidle: big.LITTLE: Add ARCH_EXYNOS entry in config ARM: EXYNOS: add generic function to calculate cpu number cpuidle: big.LITTLE: add of_device_id structure + Linux 3.16-rc5 Signed-off-by: Olof Johansson <olof@lixom.net>
| * | ARM: sunxi: select MFD_SUN6I_PRCM when sun8i arch support is enabledChen-Yu Tsai2014-07-071-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Select the MFD_SUN6I_PRCM option when sun8i arch is enabled in order to get the PRCM (Power/Reset/Clock Management) related drivers compiled. Also select ARCH_HAS_RESET_CONTROLLER and RESET_CONTROLLER to make sure the reset controller drivers are compiled. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * | ARM: sunxi: Introduce Allwinner A23 supportChen-Yu Tsai2014-06-232-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | The Allwinner A23 is a dual-core Cortex-A7-based SoC. It re-uses most of the IPs found in previous SoCs, notably the A31. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* | | Merge tag 'pinctrl-v3.17-1' of ↵Linus Torvalds2014-08-071-1/+0
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl updates from Linus Walleij: "This is the bulk pin control changes for the v3.17 merge development cycle: - get rid of the .disable() callback from the driver callback vtable. This callback was abused and counterintuitive since a pin or group of pins can be said to always be in some setting, and never really disabled. We now only enable a certain muxing, and move between some certain muxings, we never "disable" a mux setting - some janitorial moving the MSM, Samsung and Nomadik and drivers to their own subdirectories for a clearer view in the subsystem. This will continue - kill off the use of the return value from gpiochip_remove(), this will be done in parallel in the GPIO subsystem and hopefully not trigger too many unchecked return value warnings before we get rid of this altogether - a huge set of changes and improvements to the Allwinner sunxi drivers especially for their latest A23 and A31 SoCs, and some ground work for the new sun8i platform family - a large set of Rockchip driver improvements adding support for the RK3288 SoC - advances in migration of older Freescale platforms to pin control, especially i.MX1 - Samsung and Exynos improvements - support for the Qualcomm MSM8960 SoC - use the gpiolib irqchip helpers for the ST SPEAr and Intel Baytrail drivers - a bunch of nice janitorial work done with cppcheck" * tag 'pinctrl-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (61 commits) pinctrl: baytrail: Convert to use gpiolib irqchip pinctrl: sunxi: number gpio ranges starting from 0 pinctrl: sunxi: use gpiolib API to mark a GPIO used as an IRQ pinctrl: rockchip: add drive-strength control for rk3288 pinctrl: rockchip: add separate type for rk3288 pinctrl: rockchip: set is_generic in pinconf_ops pinctrl: msm: drop negativity check on unsigned value pinctrl: remove all usage of gpio_remove ret val in driver/pinctl pinctrl: qcom: Make muxing of gpio function explicit pinctrl: nomadik: move all Nomadik drivers to subdir pinctrl: samsung: Group all drivers in a sub-dir sh-pfc: sh73a0: Introduce the use of devm_regulator_register sh-pfc: Add renesas,pfc-r8a7791 to binding documentation pinctrl: msm: move all qualcomm drivers to subdir pinctrl: msm: Add msm8960 definitions pinctrl: samsung: Allow pin value to be initialized using pinfunc pinctrl: samsung: Allow grouping multiple pinmux/pinconf nodes pinctrl: exynos: Consolidate irq_chips of GPIO and WKUP EINTs pinctrl: samsung: Handle GPIO request and free using pinctrl helpers pinctrl: samsung: Decouple direction setting from pinctrl ...
| * | pinctrl: sunxi: Remove PINCTRL_SUNXIMaxime Ripard2014-07-111-1/+0
| |/ | | | | | | | | | | | | | | | | | | The PINCTRL_SUNXI configuration was kept only to deal with the introduction of per-machine symbols and the various pintrl drivers through different tree. Now that it's not useful anymore, we can just remove it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* / ARM: sunxi: Reintroduce the restart code for A10/A20 SoCsMaxime Ripard2014-07-041-0/+77
|/ | | | | | | | | | | | | | This partly reverts commits 553600502b84 (ARM: sunxi: Remove reset code from the platform) and 5e669ec583e2 (ARM: sunxi: Remove init_machine callback) for the sun4i, sun5i and sun7i families. This is needed because the watchdog counterpart of these commits was dropped, and didn't make it into 3.16. In order to still be able to reboot the board, we need to reintroduce that code. Of course, the long term view is still to get rid of that code in mach-sunxi. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
* ARM: sunxi: allow building without reset controllerArnd Bergmann2014-05-261-1/+2
| | | | | | | | | | The sunxi reset controller code is only used with sun6i (a31). After the platform has been split up into per-soc options, it's now possible to build it without the reset controller code, so the base platform init must not call into the reset driver if that is turned off at compile time. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* ARM: sunxi: Remove init_machine callbackMaxime Ripard2014-05-231-9/+0
| | | | | | | | | | The init_machine hook is now at its default value. We can remove it. Even though the sun4i and sun7i machines are nothing more than generic machines now, leave them in so that we won't have to add them back if needed, and so that the machine is still displayed in /proc/cpuinfo. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sunxi: Remove reset code from the platformMaxime Ripard2014-05-231-98/+0
| | | | | | | | | Now that reset is handled either by the watchdog driver for the sun4i, sun5i and sun7i, and by a driver of its own for sun6i, we can remove it from the platform code. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
* ARM: sun6i: Retire the smp field in A31 machineMaxime Ripard2014-05-173-24/+0
| | | | | | | Now that we can rely on the enable-method, remove the smp field declaration from A31 machine. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sun6i: Use CPU_METHOD_OF_DECLAREMaxime Ripard2014-05-171-0/+1
| | | | | | | | CPU_METHOD_OF_DECLARE allows to bind the smp_ops to a set of cpus through the enable-method property, instead of relying on the machine to define it. Switch to it to get closer to an empty machine. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sunxi: select MFD_SUN6I_PRCM when sun6i arch support is enabledBoris BREZILLON2014-05-151-0/+1
| | | | | | | | Select the MFD_SUN6I_PRCM option when sun6i arch is enabled in order to get the PRCM (Power/Reset/Clock Management) related drivers compiled. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sunxi: Split the various SoCs support in KconfigMaxime Ripard2014-05-041-7/+30
| | | | | | | This will allow to better isolate various options, and reduce the overall kernel size if we're interested in only one of the SoCs. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* Merge tag 'soc-3.15' of ↵Linus Torvalds2014-04-052-2/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC specific changes from Arnd Bergmann: "Lots of changes specific to one of the SoC families. Some that stick out are: - mach-qcom gains new features, most importantly SMP support for the newer chips (Stephen Boyd, Rohit Vaswani) - mvebu gains support for three new SoCs: Armada 375, 380 and 385 (Thomas Petazzoni and Free-electrons team) - SMP support for Rockchips (Heiko Stübner) - Lots of i.MX changes (Shawn Guo) - Added support for BCM5301x SoC (Hauke Mehrtens) - Multiplatform support for Marvell Kirkwood and Dove (Andrew Lunn and Sebastian Hesselbarth doing the final part of a long journey) - Unify davinci platforms and remove obsolete ones (Sekhar Nori, Arnd Bergmann)" * tag 'soc-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (126 commits) ARM: sunxi: Select HAVE_ARM_ARCH_TIMER ARM: cache-tauros2: remove ARMv6 code ARM: mvebu: don't select CONFIG_NEON ARM: davinci: fix DT booting with default defconfig ARM: configs: bcm_defconfig: enable bcm590xx regulator support ARM: davinci: remove tnetv107x support MAINTAINERS: Update ARM STi maintainers ARM: restrict BCM_KONA_UART to ARCH_BCM_MOBILE ARM: bcm21664: Add board support. ARM: sunxi: Add the new watchog compatibles to the reboot code ARM: enable ARM_HAS_SG_CHAIN for multiplatform ARM: davinci: remove da8xx_omapl_defconfig ARM: davinci: da8xx: fix multiple watchdog device registration ARM: davinci: add da8xx specific configs to davinci_all_defconfig ARM: davinci: enable da8xx build concurrently with older devices ARM: BCM5301X: workaround suppress fault ARM: BCM5301X: add early debugging support ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU ARM: mach-bcm: Remove GENERIC_TIME ARM: shmobile: APMU: Fix warnings due to improper printk formats ...
| * ARM: sunxi: Select HAVE_ARM_ARCH_TIMERMaxime Ripard2014-03-271-0/+1
| | | | | | | | | | | | | | | | | | In order for the architected timers support to be enabled in the kernel, this option has to be enabled. Otherwise, the architected timers driver won't be compiled in, and we will not get to use them. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
| * Merge tag 'sunxi-core-for-3.15' of https://github.com/mripard/linux into ↵Arnd Bergmann2014-03-171-2/+2
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | next/soc Merge "Allwinner core additions for 3.15" from Maxime Ripard: Just a minor commit to adjust the restart code to take into account the new compatibles * tag 'sunxi-core-for-3.15' of https://github.com/mripard/linux: ARM: sunxi: Add the new watchog compatibles to the reboot code Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * ARM: sunxi: Add the new watchog compatibles to the reboot codeMaxime Ripard2014-03-131-2/+2
| | | | | | | | | | | | | | | | | | | | | Now that the watchdog driver has new compatibles, we need to support them in the machine reboot code. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* | | Merge tag 'cleanup-3.15' of ↵Linus Torvalds2014-04-051-5/+0
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "These cleanup patches are mainly move stuff around and should all be harmless. They are mainly split out so that other branches can be based on top to avoid conflicts. Notable changes are: - We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no longer used (Uwe Kleine-König) - The Qualcomm MSM platform is split out into legacy mach-msm and new-style mach-qcom, to allow easier maintainance of the new hardware support without regressions (Kumar Gala) - A rework of some of the Kconfig logic to simplify multiplatform support (Rob Herring) - Samsung Exynos gets closer to supporting multiplatform (Sachin Kamat and others) - mach-bcm3528 gets merged into mach-bcm (Stephen Warren) - at91 gains some common clock framework support (Alexandre Belloni, Jean-Jacques Hiblot and other French people)" * tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits) ARM: hisi: select HAVE_ARM_SCU only for SMP ARM: efm32: allow uncompress debug output ARM: prima2: build reset code standalone ARM: at91: add PWM clock ARM: at91: move sam9261 SoC to common clk ARM: at91: prepare common clk transition for sam9261 SoC ARM: at91: updated the at91_dt_defconfig with support for the ADS7846 ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs ARM: at91: dt: Add at91sam9261 dt SoC support ARM: at91: switch sam9rl to common clock framework ARM: at91/dt: define main clk frequency of at91sam9rlek ARM: at91/dt: define at91sam9rl clocks ARM: at91: prepare common clk transition for sam9rl SoCs ARM: at91: prepare sam9 dt boards transition to common clk ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs ARM: at91: Add at91sam9rl DT SoC support ARM: at91: prepare at91sam9rl DT transition ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig ...
| * | ARM: select HAVE_SMP for V7 multi-platformRob Herring2014-02-191-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | All V7 platforms can run SMP kernels, so make CONFIG_SMP visible for V7 multi-platform builds. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
| * | ARM: centralize common multi-platform kconfig optionsRob Herring2014-02-191-4/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | Multi-platform requires various kconfig options to be selected, so platforms don't need to select them individually. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
* / ARM: sunxi: fix build for THUMB2_KERNELArnd Bergmann2014-03-223-11/+2
|/ | | | | | | | | | | | | | Building an SMP kernel for the sunxi platform with THUMB2 instructions fails with this error at the moment: headsmp.S:7: Error: Thumb encoding does not support an immediate here -- `msr cpsr_fsxc,#0xd3' Since the generic secondary_startup function already does the same thing in a safe way, we can just drop the private sunxi implementation and jump straight to secondary_startup. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
* Merge tag 'soc-for-linus' of ↵Linus Torvalds2014-01-236-0/+170
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "New core SoC-specific changes. New platforms: * Introduction of a vendor, Hisilicon, and one of their SoCs with some random numerical product name. * Introduction of EFM32, embedded platform from Silicon Labs (ARMv7m, i.e. !MMU). * Marvell Berlin series of SoCs, which include the one in Chromecast. * MOXA platform support, ARM9-based platform used mostly in industrial products * Support for Freescale's i.MX50 SoC. Other work: * Renesas work for new platforms and drivers, and conversion over to more multiplatform-friendly device registration schemes. * SMP support for Allwinner sunxi platforms. * ... plus a bunch of other stuff across various platforms" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (201 commits) ARM: tegra: fix tegra_powergate_sequence_power_up() inline ARM: msm_defconfig: Update for multi-platform ARM: msm: Move MSM's DT based hardware to multi-platform support ARM: msm: Only build timer.c if required ARM: msm: Only build clock.c on proc_comm based platforms ARM: ux500: Enable system suspend with WFI support ARM: ux500: turn on PRINTK_TIME in u8500_defconfig ARM: shmobile: r8a7790: Fix I2C controller names ARM: msm: Simplify ARCH_MSM_DT config ARM: msm: Add support for MSM8974 SoC ARM: sunxi: select ARM_PSCI MAINTAINERS: Update Allwinner sunXi maintainer files ARM: sunxi: Select RESET_CONTROLLER ARM: imx: improve the comment of CCM lpm SW workaround ARM: imx: improve status check of clock gate ARM: imx: add necessary interface for pfd ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100 ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support ARM: imx: Add cpu frequency scaling support ARM i.MX35: Add devicetree support. ...
| * ARM: sunxi: select ARM_PSCIZalan Blenessy2014-01-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | On Allwinner sun7i (A20) SoCs, the SMP operations are implemented in u-boot, and exposed to the kernel through PSCI. We thus need to enable PSCI support for Allwinner SoCs so that the kernel uses it to bring up the additionnal cores. Signed-off-by: Signed-off-by: Zalan Blenessy <zalan.blenessy@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * ARM: sunxi: Select RESET_CONTROLLERMaxime Ripard2014-01-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | The current code selects ARCH_HAS_RESET_CONTROLLER, that enables the RESET_CONTROLLER option by default, but doesn't select it, so a configuration might unselect it, leading to compilation error. Explictly select RESET_CONTROLLER so that we can't have this breakage anymore. Reported-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * ARM: sun6i: Add SMP support for the Allwinner A31Maxime Ripard2013-12-165-0/+156
| | | | | | | | | | | | | | | | The A31 is a quad Cortex-A7. Add the logic to use the IPs used to control the CPU configuration and the CPU power so that we can bring up secondary CPUs at boot. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * ARM: sunxi: Register the A31 reset IP in init_timeMaxime Ripard2013-11-221-0/+11
| | | | | | | | | | | | | | | | | | | | The A31 has a reset IP that maintains a few other IPs in reset by default. Among these IPs are the UARTs, and most notably the timers. We thus need to register the reset driver before initializing the timers so that the reset timer can use the reset framework. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
| * ARM: sunxi: Select ARCH_HAS_RESET_CONTROLLERMaxime Ripard2013-11-221-0/+1
| | | | | | | | | | | | | | | | The A31 has a reset controller, and we have to select this option to have access to the reset controller framework. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
* | clocksource: Add Allwinner SoCs HS timers driverMaxime Ripard2013-12-111-0/+1
|/ | | | | | | | | | | | | | | | | Most of the Allwinner SoCs (at this time, all but the A10) also have a High Speed timers that are not using the 24MHz oscillator as a source but rather the AHB clock running much faster. The IP is slightly different between the A10s/A13 and the one used in the A20/A31, since the latter have 4 timers available, while the former have only 2 of them. [dlezcano] : Fixed conflict with b788beda "Order Kconfig options alphabetically" Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 17:45:16 +0000