summaryrefslogtreecommitdiffstats
path: root/arch/mips/ath79
Commit message (Collapse)AuthorAgeFilesLines
* MIPS: ath79: Fix the ar913x reference clock rateAlban Bedel2016-04-031-37/+1
| | | | | | | | | | | | | | The reference clock on ar913x is at 40MHz and not 5MHz. The current implementation use the wrong reference rate because it doesn't take the PLL divider in account. But if we fix the code to use the divider it becomes identical with the implementation for ar724x, so just drop the broken ar913x implementation. Signed-off-by: Alban Bedel <albeu@free.fr> Tested-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12871/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath79: Fix the ar724x clock calculationWeijie Gao2016-04-031-3/+3
| | | | | | | | | | | | | | | | | | | According to the AR7242 datasheet section 2.8, AR724X CPUs use a 40MHz input clock as the REF_CLK instead of 5MHz. The correct CPU PLL calculation procedure is as follows: CPU_PLL = (FB * REF_CLK) / REF_DIV / 2. This patch is compatible with the current calculation procedure with default FB and REF_DIV values. Tested on AR7240, AR7241 and AR7242. Signed-off-by: Weijie Gao <hackpascal@gmail.com> Signed-off-by: Alban Bedel <albeu@free.fr> (Fixed the commit log message) Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12870/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* irqchip/ath79-cpu: Move the CPU IRQ driver from arch/mips/ath79/Alban Bedel2016-02-171-75/+6
| | | | | | | Signed-off-by: Alban Bedel <albeu@free.fr> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1453553867-27003-2-git-send-email-albeu@free.fr Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* irqchip/ath79-misc: Move the MISC driver from arch/mips/ath79/Alban Bedel2016-02-171-148/+15
| | | | | | | | | | | | | The driver stays the same but the initialization changes a bit. For OF boards we now get the memory map from the OF node and use a linear mapping instead of the legacy mapping. For legacy boards we still use a legacy mapping and just pass down all the parameters from the board init code. Signed-off-by: Alban Bedel <albeu@free.fr> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1453553867-27003-1-git-send-email-albeu@free.fr Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* MIPS: ath79: Remove some unused code from setup.cAlban Bedel2016-01-041-10/+1
| | | | | | | | | | | | | | Remove the unused defines for the reference clocks rate and the useless machine init function. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11505/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath79: Allow using ath79_ddr_wb_flush() from driversAlban Bedel2016-01-041-1/+0
| | | | | | | | | | | | | | | | | | Move the declaration of ath79_ddr_wb_flush() to asm/mach-ath79/ath79.h to allow using it from drivers. This is needed to move the CPU IRQ driver to drivers/irqchip. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alexander Couzens <lynxis@fe80.eu> Cc: Joel Porquet <joel@porquet.org> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11502/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath79: Prepare moving the MISC driver to drivers/irqchipAlban Bedel2016-01-041-30/+28
| | | | | | | | | | | | | | | | | | | To prepare moving out of the arch directory rework the MISC implementation to use irq domains instead of hard coded IRQ numbers. Also remove the uses of the ath79_reset_base global pointer in the IRQ methods. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alexander Couzens <lynxis@fe80.eu> Cc: Joel Porquet <joel@porquet.org> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11506/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath79: Remove useless #ifdef CONFIG_IRQCHIPAlban Bedel2016-01-041-3/+0
| | | | | | | | | | | | | | | | IRQCHIP is always enabled, so the #ifdef can just be removed. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alexander Couzens <lynxis@fe80.eu> Cc: Joel Porquet <joel@porquet.org> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11504/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath79: Add a machine entry for booting OF machinesAlban Bedel2015-11-201-0/+5
| | | | | | | | | | | | | | | | | | As I'm using a board with a broken old bootloader I hardcoded the mips_machtype and did't notice that the machine entry was still missing. [ralf@linux-mips.org: Fixed spelling message noticed by Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>.] Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11503/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath79: Fix the DDR control initialization on ar71xx and ar934xAlban Bedel2015-11-201-1/+1
| | | | | | | | | | | | | | | | | The DDR control initialization needs to know the SoC type, however ath79_detect_sys_type() was called after ath79_ddr_ctrl_init(). Reverse the order to fix the DDR control initialization on ar71xx and ar934x. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: Felix Fietkau <nbd@openwrt.org> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> CC: stable@vger.kernel.org # v4.2+ Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11500/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ATH79: Add irq chip ar7240-misc-intcAlexander Couzens2015-09-221-0/+10
| | | | | | | | | | | | | | | | | | | | | | The ar7240 misc irq chip use ack handler instead of ack_mask handler. All new ath79 chips use the ar7240 misc irq chip Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Acked-by: Alban Bedel <albeu@free.fr> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: devicetree@vger.kernel.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11164/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ATH79: Set missing irq ack handler for ar7100-misc-intc irq chipAlexander Couzens2015-09-221-2/+10
| | | | | | | | | | | | | | | | | | | | | The irq ack handler was forgotten while introducing OF support. Only ar71xx and ar933x based devices require it. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Acked-by: Alban Bedel <albeu@free.fr> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: devicetree@vger.kernel.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11163/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* genirq: Remove irq argument from irq flow handlersThomas Gleixner2015-09-161-4/+4
| | | | | | | | | | | | | | Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
* MIPS: ath79: Move the GPIO driver to drivers/gpioAlban Bedel2015-09-032-237/+1
| | | | | | | | | | | | | | GPIO drivers should be in drivers/gpio Signed-off-by: Alban Bedel <albeu@free.fr> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10597/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Ath79: Remove the unused GPIO function APIAlban Bedel2015-09-032-46/+0
| | | | | | | | | | | | | | | | | To prepare moving the GPIO driver to drivers/gpio remove the platform specific pinmux API. As it is not used by any board, and such functionality should better be implemented using the pinmux subsystem just removing it seems to be the best option. Signed-off-by: Alban Bedel <albeu@free.fr> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10596/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath91: Remove pointless irqdisable/enableThomas Gleixner2015-08-261-16/+2
| | | | | | | | | | | | | | | | | | | | | | The various interrupt flow handlers in ath79 are cascading interrupt handlers. They all have a disable_irq_nosync()/enable_irq() pair around the generic_handle_irq() call. The value of this disable/enable is zero because its a complete noop: disable_irq_nosync() merily increments the disable count without actually masking the interrupt. enable_irq() soleley decrements the disable count without touching the interrupt chip. The interrupt cannot arrive again because the complete call chain runs with interrupts disabled. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: LKML <linux-kernel@vger.kernel.org> Cc: Jiang Liu <jiang.liu@linux.intel.com> Patchwork: https://patchwork.linux-mips.org/patch/10703/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath79: irq: IRQCHIP_DECLARE moved to linux/irqchip.hAlban Bedel2015-08-261-1/+0
| | | | | | | | | | | | | | Remove the ugly cross tree include now that IRQCHIP_DECLARE moved to linux/irqchip.h. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10633/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Export get_c0_perfcount_int()Felix Fietkau2015-08-031-0/+1
| | | | | | | | | | | | | | get_c0_perfcount_int is tested from oprofile code. If oprofile is compiled as module, get_c0_perfcount_int needs to be exported, otherwise it cannot be resolved. Fixes: a669efc4a3b4 ("MIPS: Add hook to get C0 performance counter interrupt") Cc: stable@vger.kernel.org # v3.19+ Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: linux-mips@linux-mips.org Cc: abrestic@chromium.org Patchwork: https://patchwork.linux-mips.org/patch/10763/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Add basic support for the TL-WR1043ND version 1Alban Bedel2015-06-211-0/+12
| | | | | | | | | | Add a DTS for TL-WR1043ND version 1 and allow to have it built in the kernel to circumvent the broken u-boot found on these boards. Currently only the UART, LEDs and buttons are supported. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath79: Add OF support to the GPIO driverAlban Bedel2015-06-212-22/+108
| | | | | | | | | Replace the simple GPIO chip registration by a platform driver and make ath79_gpio_init() just register the device. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath79: Add OF support to the clocksAlban Bedel2015-06-211-19/+44
| | | | | | | | Allow using the SoC clocks in the device tree. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath79: Add OF support to the IRQ controllersAlban Bedel2015-06-211-1/+86
| | | | | | | | | Add OF support for the CPU and MISC interrupt controllers of most supported ATH79 devices. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath79: Add basic device tree supportAlban Bedel2015-06-212-1/+27
| | | | | | | | Add the bare minimum to load a device tree. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath79: Use the common clk APIAlban Bedel2015-06-211-27/+2
| | | | | | | | | | | | | | | | | | Make the code simpler and open the way for device tree clocks. [ralf@linux-mips.org: Resolved conflict with 2a552da6 (MIPS/IRQCHIP: Move irq_chip from arch/mips to drivers/irqchip.)] Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9774/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath79: Improve the DDR controller interfaceAlban Bedel2015-06-214-113/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The DDR controller need to be used by the IRQ controller to flush the write buffer of some devices before running the IRQ handler. It is also used by the PCI controller to setup the PCI memory windows. The current interface used to access the DDR controller doesn't provides any useful abstraction and simply rely on a shared global pointer. Replace this by a simple API to setup the PCI memory windows and use the write buffer flush independently of the SoC type. That remove the need for the shared global pointer, simplify the IRQ handler code. [ralf@linux-mips.org: Folded in Alban Bedel's follup fix.] Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9773/ Patchwork: http://patchwork.linux-mips.org/patch/10543/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath79: Correctly name the defines for the PLL_FB registerAlban Bedel2015-06-211-3/+3
| | | | | | | | | | | | | | | | | | This register is named PLL_FB and is not a divider but a multiplier. To make things less confusing rename the ARxxxx_PLL_DIV_SHIFT and ARxxxx_PLL_DIV_MASK macros to ARxxxx_PLL_FB_SHIFT and ARxxxx_PLL_FB_MASK. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9772/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath79: Add a missing new line in log messageAlban Bedel2015-06-021-1/+1
| | | | | | | | | | | | | | | The memory setup log is missing a new line. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9771/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath79: fix build problem if CONFIG_BLK_DEV_INITRD is not setLaurent Fasnacht2015-05-291-0/+3
| | | | | | | | | | | initrd_start is defined in init/do_mounts_initrd.c, which is only included in kernel if CONFIG_BLK_DEV_INITRD=y. Signed-off-by: Laurent Fasnacht <l@libres.ch> Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10198/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath79: Increase max memory limit to 256MByteHelmut Schaa2015-04-011-1/+1
| | | | | | | | | | | At least QCA955x can handle up to 256MBytes. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Cc: linux-mips@linux-mips.org Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Patchwork: https://patchwork.linux-mips.org/patch/8738/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath79: Read the initrd address from the firmware environmentAlban Bedel2014-11-241-0/+8
| | | | | | | | | | Allow loading an initrd passed by the firmware. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8354/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath79: Use the firmware lib to parse the kernel command lineAlban Bedel2014-11-241-28/+2
| | | | | | | | | | | | No need to duplicate code that is available in the firmware library. It also give us access to the firmware environment which is needed to read the initrd address and size. Signed-off-by: Alban Bedel <albeu@free.fr> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8353/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Add hook to get C0 performance counter interruptAndrew Bresticker2014-11-242-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The hardware perf event driver and oprofile interpret the global cp0_perfcount_irq differently: in the hardware perf event driver it is an offset from MIPS_CPU_IRQ_BASE and in oprofile it is the actual IRQ number. This still works most of the time since MIPS_CPU_IRQ_BASE is usually 0, but is clearly wrong. Since the performance counter interrupt may vary from platform to platform like the C0 timer interrupt, add the optional get_c0_perfcount_int hook which returns the IRQ number of the performance counter. The hook should return < 0 if the performance counter interrupt is shared with the timer. If the hook is not present, the CPU vector reported in C0_IntCtl (cp0_perfcount_irq) is used. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Tested-by: Qais Yousef <qais.yousef@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Jeffrey Deans <jeffrey.deans@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: John Crispin <blogic@openwrt.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7805/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath79: Fix compilation error when CONFIG_PCI is disabledStefan Hengelein2014-10-221-1/+1
| | | | | | | | | | | | | | | | | | When CONFIG_PCI is disabled, 'db120_pci_init()' had a different signature than when was enabled. Therefore, compilation failed when CONFIG_PCI was not present. arch/mips/ath79/mach-db120.c:132: error: too many arguments to function 'db120_pci_init' This error was found with vampyr. Signed-off-by: Stefan Hengelein <stefan.hengelein@fau.de> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: geert@linux-m68k.org Patchwork: https://patchwork.linux-mips.org/patch/8119/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* usb: host: remove selects of USB_ARCH_HAS_?HCIPaul Bolle2014-02-181-8/+0
| | | | | | | | | | USB_ARCH_HAS_EHCI, USB_ARCH_HAS_OHCI, and USB_ARCH_HAS_XHCI were just removed. Selecting them is a nop. The select statements for these symbols can be removed too. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mips: delete non-required instances of include <linux/init.h>Paul Gortmaker2014-01-241-1/+0
| | | | | | | | | | | None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6320/
* MIPS: ath79: Remove ar933x_uart_platform.h headerGabor Juhos2013-10-291-6/+0
| | | | | | | | | | | | | | | | | In commit 15ef17f622033455dcf03ae96256e474073a7b11 (tty: ar933x_uart: use the clk API to get the uart clock), the AR933x UART driver for has been converted to get the uart clock rate via the clock API and it does not use the platform data anymore. Remove the ar933x_uart_platform.h header file and get rid of the superfluous variable and initialization code in platform setup. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5832/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath79: Switch to the clkdev frameworkGabor Juhos2013-09-032-72/+54
| | | | | | | | | | | | | | | | | | | | | | | | | The ath79 code uses static clock devices and provides its own clk_{get,put} implementations. Change the code to use dynamically allocated clock devices and register the clocks within the clkdev framework. Additionally, remove the local clk_{get,put} implementation. The clkdev framework has a common implementation of those. Also move the call of ath79_clock_init() from plat_mem_init() to plat_time_init(). Otherwise it would not be possible to use memory allocation functions from ath79clock_init() becasuse the memory subsystem is not yet initialized when plat_mem_init() runs. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5780/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath79: Use local variables for clock ratesGabor Juhos2013-09-031-52/+106
| | | | | | | | | | | | | | Use local variables for ref, cpu, ddr and ahb rates in SoC specific clock init functions. The patch has no functional changes, it is an interim change in preparation of the next patch. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5781/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath79: Use ath79_get_sys_clk_rate to get basic clock ratesGabor Juhos2013-09-032-11/+12
| | | | | | | | | | | | | | | | | | | | Instead of accessing the rate field of the static clock devices directly, use the recently introduced helper function to get the rate of the basic clocks. The static ath79_{ahb,cpu,ddr,ref}_clk variables will be removed by a subsequent patch. The actual change is in preparation of that. Also move the clock frequency printing code into the plat_time_init function. We are getting the cpu clock rate there already so we can save an extra call of the helper. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5782/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath79: Use a helper function to get system clock ratesGabor Juhos2013-09-034-11/+25
| | | | | | | | | | | | The ath79 platform uses similar code to get the rate of various clocks during init. Separate the similar code into a new helper function and use that to avoid code duplication. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5778/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath79: Use local ref clock rate in ar934x_get_pll_freqGabor Juhos2013-09-031-2/+2
| | | | | | | | | | | The reference clock rate is passed in the first argument of the function. Use that instead of the rate of the global ath79_ref_clk variable. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5779/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath79: Fix ar933x watchdog clockFelix Fietkau2013-09-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The watchdog device on the AR933x is connected to the AHB clock, however the current code uses the reference clock. Due to the wrong rate, the watchdog driver can't calculate correct register values for a given timeout value and the watchdog unexpectedly restarts the system. The code uses the wrong value since the initial commit 04225e1d227c8e68d685936ecf42ac175fec0e54 (MIPS: ath79: add AR933X specific clock init) The patch fixes the code to use the correct clock rate to avoid the problem. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5777/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Delete __cpuinit/__CPUINIT usage from MIPS codePaul Gortmaker2013-07-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 3747069b25e419f6b51395f48127e9812abc3596 upstream. The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. Here, we remove all the MIPS __cpuinit from C code and __CPUINIT from asm files. MIPS is interesting in this respect, because there are also uasm users hiding behind their own renamed versions of the __cpuinit macros. [1] https://lkml.org/lkml/2013/5/20/589 [ralf@linux-mips.org: Folded in Paul's followup fix.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5494/ Patchwork: https://patchwork.linux-mips.org/patch/5495/ Patchwork: https://patchwork.linux-mips.org/patch/5509/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath79: Fix argument for the ap136_pc_init functionMarkos Chandras2013-06-211-1/+1
| | | | | | | | | | | | | ap136_pci_init expects a u8 pointer as an argument. Fixes the following build problem on a randconfig: arch/mips/ath79/mach-ap136.c:151:2: error: too many arguments to function 'ap136_pci_init' Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5476/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Idle: Consolidate all declarations in <asm/idle.h>.Ralf Baechle2013-05-221-0/+1
| | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: ath79: make use of the new memory detection codeJohn Crispin2013-05-081-15/+1
| | | | | | | | | There is now a generic function for detecting memory size. Use this instead of the one found in the ath79 support. Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5149/
* Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds2013-03-031-6/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull watchdog updates from Wim Van Sebroeck: "This contains: - fixes and improvements - devicetree bindings - conversion to watchdog generic framework of the following drivers: - booke_wdt - bcm47xx_wdt.c - at91sam9_wdt - Removal of old STMP3xxx driver - Addition of following new drivers: - new driver for STMP3xxx and i.MX23/28 - Retu watchdog driver" * git://www.linux-watchdog.org/linux-watchdog: (30 commits) watchdog: sp805_wdt depends on ARM watchdog: davinci_wdt: update to devm_* API watchdog: davinci_wdt: use devm managed clk get watchdog: at91rm9200: add DT support watchdog: add timeout-sec property binding watchdog: at91sam9_wdt: Convert to use the watchdog framework watchdog: omap_wdt: Add option nowayout watchdog: core: dt: add support for the timeout-sec dt property watchdog: bcm47xx_wdt.c: add hard timer watchdog: bcm47xx_wdt.c: rename wdt_time to timeout watchdog: bcm47xx_wdt.c: rename ops methods watchdog: bcm47xx_wdt.c: use platform device watchdog: bcm47xx_wdt.c: convert to watchdog core api watchdog: Convert BookE watchdog driver to watchdog infrastructure watchdog: s3c2410_wdt: Use devm_* functions watchdog: remove old STMP3xxx driver watchdog: add new driver for STMP3xxx and i.MX23/28 rtc: stmp3xxx: add wdt-accessor function watchdog: introduce retu_wdt driver watchdog: intel_scu_watchdog: fix Kconfig dependency ...
| * watchdog: ath79_wdt: get register base from platform device's resourcesGabor Juhos2013-03-011-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ath79_wdt driver uses a fixed memory address currently. Although this is working with each currently supported SoCs, but this may change in the future. Additionally, the driver includes platform specific header files in order to be able to get the memory base of the watchdog device. The patch adds a memory resource to the platform device, and converts the driver to get the base address of the watchdog device from that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * MIPS: ath79: use dynamically allocated watchdog deviceGabor Juhos2013-03-011-6/+1
| | | | | | | | | | | | | | | | | | | | | | Remove the static watchdog device variable and use the 'platform_device_register_simple' helper to allocate and register the device in one step. This allows us to save a few bytes in the kernel image. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* | Merge branch 'mips-next-3.9' of ↵Ralf Baechle2013-02-2115-168/+682
|\ \ | | | | | | | | | git://git.linux-mips.org/pub/scm/john/linux-john into mips-for-linux-next
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 14:54:04 +0000