summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/boot/dts/mpc836x_mds.dts
Commit message (Collapse)AuthorAgeFilesLines
* powerpc: drop MPC836x_MDS platform supportPaul Gortmaker2023-04-201-481/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This 2006 era Modular Development System (MDS) has, at its core component, a full length card with a PCI edge. No case. Serial and network connectors were on card, so it could optionally be fitted with plastic stand-offs and run stand-alone off a power brick. This is very similar to the MPC834x_MDS removed in the prior commit, but with this board variant as an evolutionary step. DDR2 was now an option, and the card edge was revised down to PCI-32 as PCI-64 never got traction. But overall the form factor and design goals were unchanged. Like all the MDS systems, it was meant as a vehicle to get the CPU out early to hardware OEMs so software and board development could take place in parallel. To that end, the BGA CPU was held in place with a mechanical spring loaded pressure assembly (vs. solder) so that early rev silicon could be replaced in the field. Not for COTS deployment! These were made in limited numbers and availability preference was given to partners who were planning to make their own boards. Given that the whole reason for existence was to assist in enabling new board designs [not happening for 10+ years], and that they weren't generally available, and that the hardware wasn't really hobbyist friendly even for retro computing, it makes sense to retire the support for this particular platform. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Li Yang <leoyang.li@nxp.com> [mpe: Drop stale reference to MPC836x_MDS in arch/powerpc/boot/Makefile] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230220115913.25811-3-paul.gortmaker@windriver.com
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner2019-05-301-5/+1
| | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc/boot/dts: Remove leading 0x and 0s from bindings notationMathieu Malaterre2018-01-211-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" and: Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} + For simplicity, two sed expressions were used to solve each warnings separately. To make the regex expression more robust a few other issues were resolved, namely setting unit-address to lower case, and adding a whitespace before the the opening curly brace: https://elinux.org/Device_Tree_Linux#Linux_conventions This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation") Reported-by: David Daney <ddaney@caviumnetworks.com> Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* dt/bindings: Remove all references to device_type "ethernet-phy"Grant Likely2014-01-161-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | The device_type property is deprecated for the flattened device tree and the value "ethernet-phy" has never been defined as having a useful meaning. Neither the kernel nor u-boot depend on it. It should never have appeared in PHY bindings. This patch removes all references to "ethernet-phy" as a device_type value from the documentation and the .dts files. This patch was generated mechanically with the following command and then verified by looking at the diff. sed -i '/"ethernet-phy"/d' `git grep -l '"ethernet-phy"'` Signed-off-by: Grant Likely <grant.likely@linaro.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/83xx: mpc836x - fix failed phy detection for ucc ethernet on MDSPaul Gortmaker2012-03-161-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mpc836x_mds platform has been broken since the commit 6fe3264945ee63292cdfb27b6e95bc52c603bb09 "netdev/phy: Use mdiobus_read() so that proper locks are taken" which caused the fsl_pq_mdio TBI autoprobe to oops. The oops was "fixed" in commit 28d8ea2d568534026ccda3e8936f5ea1e04a86a1 "fsl_pq_mdio: Clean up tbi address configuration" by simply removing the the autoscan code, and making tbi nodes mandatory. Some of the newer reference platforms were updated to have tbi nodes in 220669495bf8b68130a8218607147c7b74c28d2b "powerpc: Add TBI PHY node to first MDIO bus" but the older mpc836x didn't get one and hence was just failing with -EBUSY as follows: fsl-pq_mdio: probe of e0102120.mdio failed with error -16 ... net eth0: Could not attach to PHY eth0: Cannot initialize PHY, aborting. Add a TBI node and use the 1st free address for it. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl: update compatiable on fsl 16550 uart nodesKumar Gala2012-01-041-2/+2
| | | | | | | | The Freescale serial port's are pretty much a 16550, however there are some FSL specific bugs and features. Add a "fsl,ns16550" compatiable string to allow code to handle those FSL specific issues. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/83xx: Add power management support for MPC83xx QE boardsAnton Vorontsov2009-11-111-0/+9
| | | | | | | | Simply add power management controller nodes and sleep properties. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/qe: add new qe properties for QE based chipsHaiying Wang2009-05-191-0/+2
| | | | | | | | Add fsl,qe-num-riscs and fsl,qe-num-snums to all the devices trees which have qe node. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl: Remove cell-index from PCI nodesKumar Gala2009-05-191-1/+0
| | | | | | | | The cell-index property isn't used on PCI nodes and is ill defined. Remove it for now and if someone comes up with a good reason and consistent definition for it we can add it back Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/83xx: Add USB Host/Gadget support for MPC8360E-MDS boardsAnton Vorontsov2008-12-301-2/+41
| | | | | | | | | | | | | | | | | | | | - Update the device tree per QE USB bindings; - Add timer (FSL GTM) node; - Add gpio-controller node for BCSR13 bank (GPIOs on that bank are used to control the USB transceiver); - Set up other BCSR registers; - Configure the QE Par IO. The work is loosely based on Li Yang's patch[1], which was used to support peripheral mode only. [1] http://ozlabs.org/pipermail/linuxppc-dev/2008-August/061357.html The s-o-b line of the original patch preserved here. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: Remove device_type = "board_control" properties in .dts filesAnton Vorontsov2008-10-201-1/+1
| | | | | | | | | | | | | We don't want to encourage the bogus device_type usage. The device type isn't used in the code, so we can simply remove it from the documentation and dts files. Boards should specify proper compatible entries instead. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: 83xx: pci: Remove need for get_immrbase from mpc83xx_add_bridge.John Rigby2008-10-131-1/+2
| | | | | | | | | | | | | | | | | | | Modify mpc83xx_add_bridge to get config space register base address from the device tree instead of immr + hardcoded offset. 83xx pci nodes have this change: register properties now contain two address length tuples: First is the pci bridge register base, this has always been there. Second is the config base, this is new. This is documented in dts-bindings/fsl/83xx-512x-pci.txt The changes accomplish these things: mpc83xx_add_bridge no longer needs to call get_immrbase it uses hard coded addresses if the second register value is missing Signed-off-by: John Rigby <jrigby@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/83xx: Add missing cell-index to dma-channel device nodesKumar Gala2008-09-231-0/+4
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/83xx: mpc836x_mds: add support for the nor flashAnton Vorontsov2008-09-161-3/+20
| | | | | | | | | | This patch adds the localbus node, moves the bcsr node into the localbus node, and adds the flash node. Also enable MTD support in the defconfig. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl: proliferate simple-bus compatibility to soc nodesKim Phillips2008-07-291-0/+1
| | | | | | | | | | | | | | | add simple-bus compatible property to soc nodes for 83xx/85xx platforms that were missing them. Add same to platform probe code. This fixes SoC device drivers (such as talitos) to succeed in matching devices present in the soc node. also update mpc836x_rdk dts to new SEC bindings (overlooked in commit 3fd4473: powerpc/fsl: update crypto node definition and device tree instances). Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl: update crypto node definition and device tree instancesKim Phillips2008-07-141-8/+5
| | | | | | | | | | delete obsolete device-type property, delete model property (use compatible property instead), prepend "fsl," to Freescale specific properties. Add nodes to device trees that are missing them, and fix broken property values in other trees. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: Add dma nodes to 83xx, 85xx and 86xx boardsKumar Gala2008-06-271-0/+35
| | | | | | | | | Added DMA nodes for the elo/elo-plus DMA engines. Renamed the interrupt controller alias in mpc832x_rdb.dts to ipic so that its the same as all the other boards. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] QE: UCC nodes cleanupAnton Vorontsov2008-04-171-4/+0
| | | | | | | | | | | | - get rid of `model = "UCC"' in the ucc nodes It isn't used anywhere, so remove it. If we'll ever need something like this, we'll use compatible property instead. - replace last occurrences of device-id with cell-index. Drivers are modified for backward compatibility's sake. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.Paul Gortmaker2008-01-281-129/+131
| | | | | | | | | | | | | | | | | | | | | | | This patch converts the remaining 83xx boards to the dts-v1 format. This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx, mpc8349emitxgp and the mpc836x_mds. The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already dts-v1 and only undergo minor changes for the sake of formatting consistency across the whole group of boards; i.e. the idea being that you can do a "diff -u board_A.dts board_B.dts" and see something meaningful. The general rule I've applied is that entries for values normally parsed by humans are left in decimal (i.e. IRQ, cache size, clock rates, basic counts and indexes) and all other data (i.e. reg and ranges, IRQ flags etc.) remain in hex. I've used dtc to confirm that the output prior to this changeset matches the output after this changeset is applied for all boards. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] QE: Explicitly set address-cells and size cells for muramPaul Gortmaker2008-01-281-1/+3
| | | | | | | | | | | | | | | | | Currently there are several dts that don't specify address or size cells for the muram. This causes dtc to use default values, one of which is an address-cells of two, and this breaks the parsing of the muram ranges, which is assuming an address-cells of one. For example: Warning (reg_format): "reg" property in /qe@e0100000/muram@10000/data-only@0 has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1) Explicitly setting the address and size cells gets it parsed properly and gets rid of the four dtc warnings. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] fsl_spi: stop using device_type = "spi"Anton Vorontsov2008-01-281-4/+4
| | | | | | | | | | | Also: - rename "fsl_spi" to "fsl,spi"; - add and use cell-index property, if found; - split probing code out of fsl_spi_init, thus we can call it for legacy device_type probing and new "compatible" probing. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ucc_geth: get rid of device_type for mdioAnton Vorontsov2008-01-281-2/+1
| | | | | | | | | device_type property is bogus, thus use proper compatible. Also change compatible property to "fsl,ucc-mdio". Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] QE: get rid of most device_types and modelAnton Vorontsov2008-01-281-4/+6
| | | | | | | | | | | Now we're searching for "fsl,qe", "fsl,qe-muram", "fsl,qe-muram-data" and "fsl,qe-ic". Unfortunately it's still impossible to remove device_type = "qe" from the existing device trees because older u-boots are looking for it. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] 83xx: USB device tree cleanupsLi Yang2008-01-231-1/+0
| | | | | | | Remove device_type = "usb" for 83xx SoC USB controller Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] ucc_geth: use rx-clock-name and tx-clock-name device tree propertiesTimur Tabi2007-12-141-4/+4
| | | | | | | | | | | | | Updates the ucc_geth device driver to check the new rx-clock-name and tx-clock-name properties first. If present, it uses the new function qe_clock_source() to obtain the clock source. Otherwise, it checks the deprecated rx-clock and tx-clock properties. Update the device trees for 832x, 836x, and 8568 to contain the new property names only. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] FSL: Added aliases node to device treesKumar Gala2007-12-121-3/+14
| | | | | | | | Added aliases nodes for kurobox, 83xx, 85xx, and 86xx platforms. This included added labels and cell-index properties for serial and pci nodes. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] FSL: enet device tree cleanupsKumar Gala2007-12-121-14/+4
| | | | | | | | | | | | | | * Removed address fields in ethernet nodes * Removed #address-cells, #size-cells from gianfar nodes * Added cell-index to gianfar and ucc ethernet nodes * Added enet[0..3] labels * Renamed compatible node for gianfar mdio to "fsl,gianfar-mdio" * Removed device_type = "mdio" The matching for gianfar mdio still supports the old "mdio"/"gianfar" combo but it is now considered deprecated. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] FSL: I2C device tree cleanupsKumar Gala2007-12-111-2/+2
| | | | | | | | * Removed device_type = "i2c" * Added missing second I2C controller on MPC8548 CDS, MPC8544 DS * Added #address-cells, #size-cells, and cell-index where missing Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] 8xxx: MDS board RTC fixesKim Phillips2007-11-201-0/+9
| | | | | | | | | Now the rtc class ds1374 driver has been added, remove the old rtc driver hookup code, add rtc node to device trees, and turn on the new driver in the defconfigs. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Move PCI nodes to be sibilings with SOC nodesKumar Gala2007-09-141-60/+59
| | | | | | | | | | | Updated the device trees to have the PCI nodes be at the same level as the SOC node. This is to make it so that the SOC nodes children address space is just on chip registers and not other bus memory as well. Also, for PCIe nodes added a P2P bridge to handle the virtual P2P bridge that exists in the PHB. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] DTS cleanupKumar Gala2007-09-141-4/+0
| | | | | | | | | | | | Removed the following cruft from .dts files: * 32-bit in cpu node -- doesn't exist in any spec and not used by kernel * removed built-in (chrp legacy) * Removed #interrupt-cells in places they don't need to be set * Fixed ranges on lite5200* * Removed clock-frequency from i8259 pic node, not sure where this came from * Removed big-endian from i8259 pic nodes, this was just bogus Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Update PCI nodes in the 83xx/85xx boards device treeRoy Zang2007-07-231-1/+1
| | | | | | | | | | | | | Updated the 83xx & 85xx device tree PCI related compartible property. Used the following compatible properties: PCI "fsl,mpc8349-pci" PCI "fsl,mpc8540-pci" PCI-X: "fsl,mpc8540-pcix" PCIe: "fsl,mpc8548-pcie" Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Fix MAC address entries for 83xx, 85xx, and 86xx device treesTimur Tabi2007-07-031-2/+14
| | | | | | | | | | | For the 83xx, 85xx, and 86xx device trees, add a "local-mac-address" property to every Ethernet node that didn't have one. Add a comment indicating that the "address" and/or "mac-address" properties are deprecated in DTS files and will be removed at a later time. Change all MAC address properties to have a zero MAC address value. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Replace undocumented interface properties in dts filesKim Phillips2007-05-021-2/+2
| | | | | | | phy-connection-type now supersedes the interface property. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Remove unused, undocumented #cpus property from cpus nodeStuart Yoder2007-03-091-1/+0
| | | | | | | | | The #cpus property is unused and undocumented and is therefore being removed. Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] 83xx: Updated and renamed MPC8360PB to MPC836x MDSKumar Gala2007-02-171-0/+363
The MPC836x PB board is really just one part of the MPC836x MDS. We currently name all other PB boards as MDS. Removed all references to PB and replaced with MDS. Additionally renamed the .dts to match the defconfig (mpc836x_mds*). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 14:41:10 +0000