summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/boot
Commit message (Collapse)AuthorAgeFilesLines
* powerpc/boot: Specify ABI v2 when building an LE boot wrapperBenjamin Herrenschmidt2015-09-161-0/+3
| | | | | | | | | | The kernel does it, not the boot wrapper, which breaks with some cross compilers that still default to ABI v1. Fixes: 147c05168fc8 ("powerpc/boot: Add support for 64bit little endian wrapper") Cc: stable@vger.kernel.org # v3.16+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/t1023rdb/dts: set ifc nand chip select from 2 to 1Jaiprakash Singh2015-08-171-1/+1
| | | | | | | | | | IFC NAND chip select is wrongly mapped to 2 in reg property of NAND node. Due to this kernel is not able probe NAND flash. Set chip select to 1 in reg property. Signed-off-by: Jaiprakash Singh <b44839@freescale.com> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* powerpc/mpc85xx:Add SCFG device tree support of T104xWang Dongsheng2015-08-171-0/+5
| | | | | Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* powerpc/fsl-booke: Add T1040D4RDB/T1042D4RDB board supportPriyanka Jain2015-08-173-0/+304
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | T1040D4RDB/T1042D4RDB are Freescale Reference Design Board which can support T1040/T1042 QorIQ Power Architecture™ processor respectively T1040D4RDB/T1042D4RDB board Overview ------------------------------------- - SERDES Connections, 8 lanes supporting: - PCI - SGMII - SATA 2.0 - QSGMII(only for T1040D4RDB) - DDR Controller - Supports rates of up to 1600 MHz data-rate - Supports one DDR4 UDIMM -IFC/Local Bus - NAND flash: 1GB 8-bit NAND flash - NOR: 128MB 16-bit NOR Flash - Ethernet - Two on-board RGMII 10/100/1G ethernet ports. - PHY #0 remains powered up during deep-sleep - CPLD - Clocks - System and DDR clock (SYSCLK, “DDRCLK”) - SERDES clocks - Power Supplies - USB - Supports two USB 2.0 ports with integrated PHYs - Two type A ports with 5V@1.5A per port. - SDHC - SDHC/SDXC connector - SPI - On-board 64MB SPI flash - I2C - Devices connected: EEPROM, thermal monitor, VID controller - Other IO - Two Serial ports - ProfiBus port Add support for T1040/T1042D4RDB board: -add device tree -Add entry in corenet_generic.c Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* powerpc: Add a vga alias node for P1022Jason Jin2015-08-172-1/+3
| | | | | | | | | | | | | | | In u-boot, when set the video as console, the name 'vga' is used as a general name for the video device, during the fdt_fixup_stdout process, the 'vga' name is used to search in the dtb to setup the 'linux,stdout-path' node. Though the P1022 DIU is not VGA-compatible device, to meet the 'vga' name used in u-boot, the vga alias node is added for P1022 in this patch. At the same time, a display alias is also added so that no other components grow dependencies on the vga alias node. Signed-off-by: Jason Jin <Jason.Jin@freescale.com> Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* powerpc/t1023rdb: add ina220 current sensor nodeShengzhou Liu2015-08-071-0/+11
| | | | | | | Add support for INA220 current sensor. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* powerpc/t1024rdb: add ina220 current sensor nodeShengzhou Liu2015-08-071-0/+6
| | | | | | | Add support for INA220 current sensor. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* Merge tag 'devicetree-for-linus' of ↵Linus Torvalds2015-07-012-0/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux Pull devicetree updates from Grant Likely: "A whole lot of bug fixes. Nothing stands out here except the ability to enable CONFIG_OF on every architecture, and an import of a newer version of dtc" * tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: (22 commits) of/irq: Rename "intc_desc" to "of_intc_desc" to fix OF on sh of/irq: Fix pSeries boot failure Documentation: DT: Fix a typo in the filename "lantiq,<chip>-pinumx.txt" of: define of_find_node_by_phandle for !CONFIG_OF of/address: use atomic allocation in pci_register_io_range() of: Add vendor prefix for Zodiac Inflight Innovations dt/fdt: add empty versions of early_init_dt_*_memory_arch of: clean-up unnecessary libfdt include paths of: make unittest select OF_EARLY_FLATTREE instead of depend on it of: make CONFIG_OF user selectable MIPS: prepare for user enabling of CONFIG_OF of/fdt: fix argument name and add comments of unflatten_dt_node() of: return NUMA_NO_NODE from fallback of_node_to_nid() tps6507x.txt: Remove executable permission of/overlay: Grammar s/an negative/a negative/ of/fdt: Make fdt blob input parameters of unflatten functions const of: add helper function to retrive match data of: Grammar s/property exist/property exists/ of: Move OF flags to be visible even when !CONFIG_OF scripts/dtc: Update to upstream version 9d3649bd3be245c9 ...
| * libfdt: add fdt type definitionsRob Herring2015-04-292-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | In preparation for libfdt/dtc update, add the new fdt specific types. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org
* | Merge tag 'powerpc-4.2-1' of ↵Linus Torvalds2015-06-2434-38/+2117
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc updates from Michael Ellerman: - disable the 32-bit vdso when building LE, so we can build with a 64-bit only toolchain. - EEH fixes from Gavin & Richard. - enable the sys_kcmp syscall from Laurent. - sysfs control for fastsleep workaround from Shreyas. - expose OPAL events as an irq chip by Alistair. - MSI ops moved to pci_controller_ops by Daniel. - fix for kernel to userspace backtraces for perf from Anton. - merge pseries and pseries_le defconfigs from Cyril. - CXL in-kernel API from Mikey. - OPAL prd driver from Jeremy. - fix for DSCR handling & tests from Anshuman. - Powernv flash mtd driver from Cyril. - dynamic DMA Window support on powernv from Alexey. - LLVM clang fixes & workarounds from Anton. - reworked version of the patch to abort syscalls when transactional. - fix the swap encoding to support 4TB, from Aneesh. - various fixes as usual. - Freescale updates from Scott: Highlights include more 8xx optimizations, an e6500 hugetlb optimization, QMan device tree nodes, t1024/t1023 support, and various fixes and cleanup. * tag 'powerpc-4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (180 commits) cxl: Fix typo in debug print cxl: Add CXL_KERNEL_API config option powerpc/powernv: Fix wrong IOMMU table in pnv_ioda_setup_bus_dma() powerpc/mm: Change the swap encoding in pte. powerpc/mm: PTE_RPN_MAX is not used, remove the same powerpc/tm: Abort syscalls in active transactions powerpc/iommu/ioda2: Enable compile with IOV=on and IOMMU_API=off powerpc/include: Add opal-prd to installed uapi headers powerpc/powernv: fix construction of opal PRD messages powerpc/powernv: Increase opal-irqchip initcall priority powerpc: Make doorbell check preemption safe powerpc/powernv: pnv_init_idle_states() should only run on powernv macintosh/nvram: Remove as unused powerpc: Don't use gcc specific options on clang powerpc: Don't use -mno-strict-align on clang powerpc: Only use -mtraceback=no, -mno-string and -msoft-float if toolchain supports it powerpc: Only use -mabi=altivec if toolchain supports it powerpc: Fix duplicate const clang warning in user access code vfio: powerpc/spapr: Support Dynamic DMA windows vfio: powerpc/spapr: Register memory and define IOMMU v2 ...
| * | powerpc/mpc85xx: Add FSL QorIQ DPAA QMan support to device tree(s)Kumar Gala2015-06-0227-10/+995
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Geoff Thorpe <Geoff.Thorpe@freescale.com> Signed-off-by: Hai-Ying Wang <Haiying.Wang@freescale.com> Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> [Emil Medve: Sync with the upstream binding] Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> [Scott Wood: s/fsl,qman-channel-id/cell-index] Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Madalin-Cristian Bucur <madalin.bucur@freescale.com>
| * | powerpc/dts: Fix incorrect clock-names propertyIgal Liberman2015-06-021-2/+2
| | | | | | | | | | | | | | | Signed-off-by: Igal Liberman <Igal.Liberman@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | powerpc/fsl-booke: Add T1023 RDB board supportShengzhou Liu2015-06-021-0/+151
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | T1023RDB is a Freescale Reference Design Board that hosts T1023 SoC. T1023RDB board Overview ----------------------- - T1023 SoC integrating two 64-bit e5500 cores up to 1.4GHz - CoreNet fabric supporting coherent and noncoherent transactions with prioritization and bandwidth allocation - Memory: 2GB Micron MT40A512M8HX unbuffered 32-bit fixed DDR4 without ECC - Accelerator: DPAA components consist of FMan, BMan, QMan, DCE and SEC - Ethernet interfaces: - one 1G RGMII port on-board(RTL8211F PHY) - one 1G SGMII port on-board(RTL8211F PHY) - one 2.5G SGMII port on-board(AQR105 PHY) - PCIe: Two Mini-PCIe connectors on-board. - SerDes: 4 lanes up to 10.3125GHz - NOR: 128MB S29GL01GS110TFIV10 Spansion NOR Flash - NAND: 512MB S34MS04G200BFI000 Spansion NAND Flash - eSPI: 64MB S25FL512SAGMFI010 Spansion SPI flash - USB: one Type-A USB 2.0 port with internal PHY - eSDHC: support SD/MMC card and eMMC flash on-board - 256Kbit M24256 I2C EEPROM - RTC: Real-time clock DS1339 on I2C bus - UART: one serial port on-board with RJ45 connector - Debugging: JTAG/COP for T1023 debugging Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | powerpc/fsl-booke: Add T1024 RDB board supportShengzhou Liu2015-06-021-0/+185
| | | | | | | | | | | | | | | | | | | | | | | | | | | T1024RDB is a Freescale Reference Design Board that hosts the T1024 SoC. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> [scottwood: vendor prefix: s/at24/atmel/ and trimmed detailed board description with too-long lines] Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | powerpc/fsl-booke: Add T1024 QDS board supportShengzhou Liu2015-06-022-18/+269
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Freescale T1024/T1023 QorIQ Development System Board. T1024QDS is a high-performance computing evaluation, development and test platform for T1024 QorIQ Power Architecture processor. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> [scottwood: vendor prefix: s/at24/atmel/ and trimmed detailed board description with too-long lines] Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | powerpc/fsl-booke: Add device tree support for T1024/T1023 SoCShengzhou Liu2015-06-023-0/+517
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The T1024 SoC includes the following function and features: - Two 64-bit Power architecture e5500 cores, up to 1.4GHz - private 256KB L2 cache each core and shared 256KB CoreNet platform cache (CPC) - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support - Data Path Acceleration Architecture (DPAA) incorporating acceleration - Four MAC for 1G/2.5G/10G network interfaces (RGMII, SGMII, QSGMII, XFI) - High-speed peripheral interfaces - Three PCI Express 2.0 controllers - Additional peripheral interfaces - One SATA 2.0 controller - Two USB 2.0 controllers with integrated PHY - Enhanced secure digital host controller (SD/eSDHC/eMMC) - Enhanced serial peripheral interface (eSPI) - Four I2C controllers - Four 2-pin UARTs or two 4-pin UARTs - Integrated Flash Controller supporting NAND and NOR flash - Two 8-channel DMA engines - Multicore programmable interrupt controller (PIC) - LCD interface (DIU) with 12 bit dual data rate - QUICC Engine block supporting TDM, HDLC, and UART - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB) - Support for hardware virtualization and partitioning enforcement - QorIQ Platform's Trust Architecture 2.0 Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> [scottwood@freescale.com: whitespace fixes] Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | powerpc/dts: Unify B4 mux nodesIgal Liberman2015-06-023-26/+16
| |/ | | | | | | | | | | Signed-off-by: Igal Liberman <Igal.Liberman@freescale.com> Change-Id: Ic5f28f7b492b708f00a5ff74dda723ce5e1da0ba Signed-off-by: Scott Wood <scottwood@freescale.com>
* / powerpc/dts: add eSDHC compatible listYangbo Lu2015-06-015-0/+5
|/ | | | | | | | Add eSDHC compatible list for P2041/P3041/P4080/P5020/P5040. Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* powerpc: Remove the celleb supportMichael Ellerman2015-04-071-2/+0
| | | | | | | | | | | | | | | | | The celleb code has seen no actual development for ~7 years. We (maintainers) have no access to test hardware, and it is highly likely the code has bit-rotted. As far as we're aware the hardware was never widely available, and is certainly no longer available, and no one on the list has shown any interest in it over the years. So remove it. If anyone has one and cares please speak up. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Jeremy Kerr <jk@ozlabs.org>
* powerpc/t2080qds: fix rtc interruptShengzhou Liu2015-03-311-1/+1
| | | | | | | | RTC interrupt uses IRQ11 on T2080QDS. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> [scottwood@freescale.com: fix subject line] Signed-off-by: Scott Wood <scottwood@freescale.com>
* powerpc/mpc85xx: Add FSL QorIQ DPAA BMan support to device tree(s)Kumar Gala2015-03-2326-22/+899
| | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Geoff Thorpe <Geoff.Thorpe@freescale.com> Signed-off-by: Hai-Ying Wang <Haiying.Wang@freescale.com> Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> [Emil Medve: Sync with the upstream binding] Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* powerpc/dts: Remove B4860 emulator supportEmil Medve2015-03-231-223/+0
| | | | | | | Probably we should have not upstreamed this in the first place Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* powerpc/boot: don't clobber r6 and r7 in epapr bootJeremy Kerr2015-03-161-12/+12
| | | | | | | | | | | We use r6 and r7 for epapr boot, but the current pre-C init will clobber both of these. This change does a simple replacement, of r6 -> r12 and r7 -> r13, so that we hit platform init with these registers intact. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/boot: Fix stack corruption in epapr entry pointJeremy Kerr2015-03-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, a 64-bit little-endian zImage.epapr won't boot in epapr mode, as we never return from platform_init. Before entering C, we initialise our stack by setting r1 16 bytes below the end of the _bss_stack: stwu r0,-16(r1) /* establish a stack frame */ However, the called function will save the caller's lr in the caller's frame's lr save area, at -16(r1) to -32(r1). This means that writes to the fdt variable will corrupt the saved link register: 0000000020c06018 l O .bss 0000000000001000 _bss_stack 0000000020c07018 l O .bss 0000000000000008 fdt We'll need at least 32 bytes in the initial stack frame, to handle the LR save area. We bump this to 112 bytes, as that'll be the max required by ABIv1. Thanks to Alistair Popple for debugging help. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/boot/wrapper: use the pseries wrapper for zImage.epaprJeremy Kerr2015-03-161-1/+1
| | | | | | | | | | | | We'll likely be entering the zImage.epapr as BE, so include the pseries implementation of _zimage_start, which adds the endian fixup magic. Although the endian fixup won't work on Book III-E machines starting LE, the current entry point doesn't support LE anyway, so we shouldn't be breaking anything. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/boot/fdt: Add little-endian support to libfdt wrappersJeremy Kerr2015-03-162-6/+16
| | | | | | | | | | For epapr-style boot, we may be little-endian. This change implements the proper conversion for fdt*_to_cpu and cpu_to_fdt*. We also need the full cpu_to_* and *_to_cpu macros for this. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/boot/fdt: Use unsigned long for pointer castsJeremy Kerr2015-03-161-3/+3
| | | | | | | | Now that the wrapper supports 64-bit builds, we see warnings when attempting to cast pointers to int. Use unsigned long instead. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/boot: drop planetcore_set_serial_speedArseny Solokha2015-03-162-36/+0
| | | | | | | | | Drop planetcore_set_serial_speed() which had no users since its inception in commit fec6047047fd ("[POWERPC] bootwrapper: Add PlanetCore firmware support") in 2007. Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/boot: Makefile cleanupMichal Marek2015-03-161-1/+1
| | | | | | | | The $(image-n) variable will never exist, because unset Kconfig options are '' and not 'n'. Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc: dts: pq3/85xx: Fix GPIO addressAlessio Igor Bogani2015-01-291-3/+3
| | | | | | | Fix the GPIO address in the device tree to match the documented location. Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by: Scott Wood <scottwood@freescale.com>
* powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA QManKumar Gala2015-01-293-0/+183
| | | | | | | | | | Change-Id: I16e63db731e55a3d60d4e147573c1af8718082d3 Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Geoff Thorpe <Geoff.Thorpe@freescale.com> Signed-off-by: Hai-Ying Wang <Haiying.Wang@freescale.com> [Emil Medve: Sync with the upstream binding] Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA BManKumar Gala2015-01-292-0/+131
| | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Geoff Thorpe <Geoff.Thorpe@freescale.com> Signed-off-by: Hai-Ying Wang <Haiying.Wang@freescale.com> [Emil Medve: Sync with the upstream binding] Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* powerpc/85xx: Add support for Emerson/Artesyn MVME2500.Alessio Igor Bogani2015-01-291-0/+280
| | | | | | | | | | | | | | | | | | | | | | Add support for the Artesyn MVME2500 Single Board Computer. The MVME2500 is a 6U form factor VME64 computer with: - A single Freescale QorIQ P2010 CPU - 1 GB of DDR3 onboard memory - Three Gigabit Ethernets - Five 16550 compatible UARTS - One USB 2.0 port, one SHDC socket and one SATA connector - One PCI/PCI eXpress Mezzanine Card (PMC/XMC) Slot - MultiProcessor Interrupt Controller (MPIC) - A DS1375T Real Time Clock (RTC) and 512 KB of Non-Volatile Memory - Two 64 KB EEPROMs - U-Boot in 16 SPI Flash This patch is based on linux-3.18 and has been boot tested. Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by: Scott Wood <scottwood@freescale.com>
* powerpc/mpc85xx: Add ranges to etsec2 nodesScott Wood2015-01-293-0/+3
| | | | | | | | | | | Commit 746c9e9f92dd "of/base: Fix PowerPC address parsing hack" limited the applicability of the workaround whereby a missing ranges is treated as an empty ranges. This workaround was hiding a bug in the etsec2 device tree nodes, which have children with reg, but did not have ranges. Signed-off-by: Scott Wood <scottwood@freescale.com> Reported-by: Alexander Graf <agraf@suse.de>
* powerpc/dts: Remove T4240 emulator supportEmil Medve2015-01-291-281/+0
| | | | | | | Probably we should have not upstreamed this in the first place Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* Merge remote-tracking branch 'scottwood/next' into nextMichael Ellerman2014-11-1821-418/+278
|\ | | | | | | | | | | | | | | Scott says: "Highlights include a bunch of 8xx optimizations, device tree bindings for Freescale BMan, QMan, and FMan datapath components, misc device tree updates, and inbound rio window support."
| * powerpc/dts: Add node(s) for the platform PLLEmil Medve2014-11-072-0/+14
| | | | | | | | | | | | Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Change-Id: If76cd705a01813abe53396c1486bc13c4289ee92 Signed-off-by: Scott Wood <scottwood@freescale.com>
| * powerpc/dts: Factorize the clock control nodeEmil Medve2014-11-0714-368/+163
| | | | | | | | | | | | Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Change-Id: I25ce24a25862b4ca460164159867abefe00ccdd1 Signed-off-by: Scott Wood <scottwood@freescale.com>
| * powerpc: Add INA220 to device tree for supported boardsHongtao Jia2014-11-074-0/+72
| | | | | | | | | | | | | | Including: P3041DS P5020DS P5040DS B4QDS Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * powerpc: Add ADT7461 to device tree for supported boardsHongtao Jia2014-11-073-0/+29
| | | | | | | | | | | | | | Including: T104xRDB T208xQDS B4QDS Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * powerpc/mpc85xx: Remove SPI and NAND partition from bsc9131rdb.dtsiAshish Kumar2014-11-071-50/+0
| | | | | | | | | | | | | | | | | | | | | | * Run "mtdparts default" on u-boot to create dynamic partitions * Or use dynamic mtd partition with the help of bootargs in u-boot Append bootargs with: "mtdparts=ff800000.flash:1m(nand_uboot),512K(nand_dtb),8m(nand_kernel),-(fs);\ spiff707000.0:1m(spi_uboot),4m(spi_kernel),512k(spi_dtb),-(fs)'" Signed-off-by: Ashish Kumar <Ashish.Kumar@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* | powerpc/boot: Parse chosen/cmdline-timeout parameterSimon Kagstrom2014-11-103-6/+17
|/ | | | | | | | | | | | On some platforms a 5 second timeout during boot might be quite long, so make it configurable. Run the loop at least once to let the user stop the boot by holding a key pressed. If the timeout is set to 0, don't wait for input, which can be used as a workaround if the boot hangs on random data coming in on the serial port. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> [mpe: Changelog wording & whitespace] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* Merge branch 'for-linus' of ↵Linus Torvalds2014-10-117-4/+318
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc updates from Michael Ellerman: "Here's a first pull request for powerpc updates for 3.18. The bulk of the additions are for the "cxl" driver, for IBM's Coherent Accelerator Processor Interface (CAPI). Most of it's in drivers/misc, which Greg & Arnd maintain, Greg said he was happy for us to take it through our tree. There's the usual minor cleanups and fixes, including a bit of noise in drivers from some of those. A bunch of updates to our EEH code, which has been getting more testing. Several nice speedups from Anton, including 20% in clear_page(). And a bunch of updates for freescale from Scott" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (130 commits) cxl: Fix afu_read() not doing finish_wait() on signal or non-blocking cxl: Add documentation for userspace APIs cxl: Add driver to Kbuild and Makefiles cxl: Add userspace header file cxl: Driver code for powernv PCIe based cards for userspace access cxl: Add base builtin support powerpc/mm: Add hooks for cxl powerpc/opal: Add PHB to cxl mode call powerpc/mm: Add new hash_page_mm() powerpc/powerpc: Add new PCIe functions for allocating cxl interrupts cxl: Add new header for call backs and structs powerpc/powernv: Split out set MSI IRQ chip code powerpc/mm: Export mmu_kernel_ssize and mmu_linear_psize powerpc/msi: Improve IRQ bitmap allocator powerpc/cell: Make spu_flush_all_slbs() generic powerpc/cell: Move data segment faulting code out of cell platform powerpc/cell: Move spu_handle_mm_fault() out of cell platform powerpc/pseries: Use new defines when calling H_SET_MODE powerpc: Update contact info in Documentation files powerpc/perf/hv-24x7: Simplify catalog_read() ...
| * Merge branch 'next' of ↵Michael Ellerman2014-10-046-4/+313
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux.git Freescale updates from Scott (27 commits): "Highlights include DMA32 zone support (SATA, USB, etc now works on 64-bit FSL kernels), MSI changes, 8xx optimizations and cleanup, t104x board support, and PrPMC PCI enumeration."
| | * powerpc: dts: t208x: Change T208x USB controller versionNikhil Badola2014-09-161-2/+2
| | | | | | | | | | | | | | | | | | | | | Change USB controller version to 2.5 in compatible string for T2080/T2081 Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| | * powerpc/fsl-booke: Add initial T1042RDB_PI board supportPriyanka Jain2014-09-091-0/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | T1042RDB_PI is Freescale Reference Design Board supporting the T1042 QorIQ Power Architecture™ processor. T1042 is a reduced personality of T1040 SoC without Integrated 8-port Gigabit. The board is designed with low power features targeted for Printing Image Market. T1042RDB_PI is similar to T1040RDB board with few differences like it has video interface, supports T1042 personality only T1042RDB_PI board Overview ----------------------- - SERDES Connections, 8 lanes supporting: - PCI - SATA 2.0 - DDR Controller - Supports rates of up to 1600 MHz data-rate - Supports one DDR3LP UDIMM -IFC/Local Bus - NAND flash: 1GB 8-bit NAND flash - NOR: 128MB 16-bit NOR Flash - Ethernet - Two on-board RGMII 10/100/1G ethernet ports. - PHY #0 remains powered up during deep-sleep - CPLD - Clocks - System and DDR clock (SYSCLK, “DDRCLK”) - SERDES clocks - Power Supplies - USB - Supports two USB 2.0 ports with integrated PHYs - Two type A ports with 5V@1.5A per port. - SDHC - SDHC/SDXC connector - SPI - On-board 64MB SPI flash - I2C - Device connected: EEPROM, thermal monitor, VID controller, RTC - Other IO - Two Serial ports - ProfiBus port Add support for T1042RDB_PI board: -add device tree -Add entry in corenet_generic.c, as it is similar to other corenet platforms Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| | * powerpc/fsl-booke: Add initial T1040/T1042 RDB board supportPriyanka Jain2014-09-093-0/+252
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | T1040/T1042RDB is Freescale Reference Design Board. The board can support both T1040/T1042 QorIQ Power Architecture™ processor. T1040/T1042RDB board Overview ----------------------- - SERDES Connections, 8 lanes supporting: - PCI - SGMII - QSGMII - SATA 2.0 - DDR Controller - Supports rates of up to 1600 MHz data-rate - Supports one DDR3LP UDIMM -IFC/Local Bus - NAND flash: 1GB 8-bit NAND flash - NOR: 128MB 16-bit NOR Flash - Ethernet - Two on-board RGMII 10/100/1G ethernet ports. - PHY #0 remains powered up during deep-sleep - CPLD - Clocks - System and DDR clock (SYSCLK, “DDRCLK”) - SERDES clocks - Power Supplies - USB - Supports two USB 2.0 ports with integrated PHYs - Two type A ports with 5V@1.5A per port. - SDHC - SDHC/SDXC connector - SPI - On-board 64MB SPI flash - I2C - Devices connected: EEPROM, thermal monitor, VID controller - Other IO - Two Serial ports - ProfiBus port Add support for T1040/T1042 RDB board: -add device tree -add entry in Kconfig to build -Add entry in corenet_generic.c, as it is similar to other corenet platforms Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| | * powerpc: dts: t4240: Change T4240 USB controller versionNikhil Badola2014-09-031-2/+2
| | | | | | | | | | | | | | | | | | | | | Change USB controller version to 2.5 in compatible string for T4240 Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | powerpc/boot: Don't install zImage.* from make installTony Breeds2014-09-251-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | in commit 29f1aff2c (powerpc: Copy bootable images in the default install script) we changed to copying all the built boot targets based on the assumption that it's backwards compatible. It turns out that debian devived installkernel scripts will barf if not given exactly 4 args. This change reverts make install to just install the vmlinux (we can change the dfault in a seperate patch) and introduces a new make zInstall which works with a more flexible installkernel script. Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* | | Merge branch 'for-linus' of ↵Linus Torvalds2014-10-071-1/+1
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull "trivial tree" updates from Jiri Kosina: "Usual pile from trivial tree everyone is so eagerly waiting for" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Remove MN10300_PROC_MN2WS0038 mei: fix comments treewide: Fix typos in Kconfig kprobes: update jprobe_example.c for do_fork() change Documentation: change "&" to "and" in Documentation/applying-patches.txt Documentation: remove obsolete pcmcia-cs from Changes Documentation: update links in Changes Documentation: Docbook: Fix generated DocBook/kernel-api.xml score: Remove GENERIC_HAS_IOMAP gpio: fix 'CONFIG_GPIO_IRQCHIP' comments tty: doc: Fix grammar in serial/tty dma-debug: modify check_for_stack output treewide: fix errors in printk genirq: fix reference in devm_request_threaded_irq comment treewide: fix synchronize_rcu() in comments checkstack.pl: port to AArch64 doc: queue-sysfs: minor fixes init/do_mounts: better syntax description MIPS: fix comment spelling powerpc/simpleboot: fix comment ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 04:11:11 +0000