summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/kernel/process.c
Commit message (Collapse)AuthorAgeFilesLines
* powerpc/64s: Avoid cpabort in context switch when possibleNicholas Piggin2017-06-151-1/+26
| | | | | | | | | | | | | | | | | The ISA v3.0B copy-paste facility only requires cpabort when switching to a process that has foreign real addresses mapped (direct access to accelerators), to clear a potential copy buffer filled by a previous thread. There is no accelerator driver implemented yet, so cpabort can be removed. It can be be re-added when a driver is implemented. POWER9 DD1 requires the copy buffer to always be cleared on context switch, but if accelerators are not in use, then an unpaired copy from a dummy region is sufficient to clear data out of the copy buffer. This increases context switch performance by about 5% on POWER9. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/64s: Leave interrupts hard enabled in context switch for radixNicholas Piggin2017-06-151-6/+8
| | | | | | | | | | | | | | | Commit 4387e9ff25 ("[POWERPC] Fix PMU + soft interrupt disable bug") hard disabled interrupts over the low level context switch, because the SLB management can't cope with a PMU interrupt accesing the stack in that window. Radix based kernel mapping does not use the SLB so it does not require interrupts hard disabled here. This is worth 1-2% in context switch performance on POWER9. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/64: Avoid restore_math call if possible in syscall exitNicholas Piggin2017-06-151-0/+4
| | | | | | | | | | | | | | | | | | | | | | The syscall exit code that branches to restore_math is quite heavy on Book3S, consisting of 2 mtmsr instructions. Threads that don't use both FP and vector can get caught here if the kernel ever uses FP or vector. Lazy-FP/vec context switching also trips this case. So check for lazy FP and vector before switching RI for restore_math. Move most of this case out of line. For threads that do want to restore math registers, the MSR switches are still suboptimal. Future direction may be to use a soft-RI bit to avoid MSR switches in kernel (similar to soft-EE), but for now at least the no-restore POWER9 context switch rate increases by about 5% due to sched_yield(2) return performance. I haven't constructed a test to measure the syscall cost. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/tm: Fix FP and VMX register corruptionMichael Neuling2017-05-151-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit dc3106690b20 ("powerpc: tm: Always use fp_state and vr_state to store live registers"), a section of code was removed that copied the current state to checkpointed state. That code should not have been removed. When an FP (Floating Point) unavailable is taken inside a transaction, we need to abort the transaction. This is because at the time of the tbegin, the FP state is bogus so the state stored in the checkpointed registers is incorrect. To fix this, we treclaim (to get the checkpointed GPRs) and then copy the thread_struct FP live state into the checkpointed state. We then trecheckpoint so that the FP state is correctly restored into the CPU. The copying of the FP registers from live to checkpointed is what was missing. This simplifies the logic slightly from the original patch. tm_reclaim_thread() will now always write the checkpointed FP state. Either the checkpointed FP state will be written as part of the actual treclaim (in tm.S), or it'll be a copy of the live state. Which one we use is based on MSR[FP] from userspace. Similarly for VMX. Fixes: dc3106690b20 ("powerpc: tm: Always use fp_state and vr_state to store live registers") Cc: stable@vger.kernel.org # 4.9+ Signed-off-by: Michael Neuling <mikey@neuling.org> Reviewed-by: cyrilbur@gmail.com Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar2017-03-021-0/+1
| | | | | | | | | | | | | | | | | | | | <linux/sched/task_stack.h> We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task_stack.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar2017-03-021-0/+1
| | | | | | | | | | | | | | | | | | | | <linux/sched/task.h> We are going to split <linux/sched/task.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar2017-03-021-0/+1
| | | | | | | | | | | | | | | | | | | | <linux/sched/debug.h> We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/debug.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* Merge tag 'powerpc-4.11-2' of ↵Linus Torvalds2017-03-011-0/+22
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc updates from Michael Ellerman: "Highlights include: - an update of the disassembly code used by xmon to the latest versions in binutils. We've received permission from all the authors of the relevant binutils changes to relicense their changes to the relevant files from GPLv3 to GPLv2, for inclusion in Linux. Thanks to Peter Bergner for doing the leg work to get permission from everyone. - addition of the "architected" Power9 CPU table entry, allowing us to boot in Power9 architected mode under a hypervisor. - updates to the Power9 PMU code. - implementation of clear_bit_unlock_is_negative_byte() to optimise unlock_page(). - Freescale updates from Scott: "Highlights include 8xx breakpoints and perf, t1042rdb display support, and board updates." Thanks to: Al Viro, Andrew Donnellan, Aneesh Kumar K.V, Balbir Singh, Douglas Miller, Frédéric Weisbecker, Gavin Shan, Madhavan Srinivasan, Michael Roth, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Peter Bergner, Paul E. McKenney, Rashmica Gupta, Russell Currey, Sahil Mehta, Stewart Smith" * tag 'powerpc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (48 commits) powerpc: Remove leftover cputime_to_nsecs call causing build error powerpc/mm/hash: Always clear UPRT and Host Radix bits when setting up CPU powerpc/optprobes: Fix TOC handling in optprobes trampoline powerpc/pseries: Advertise Hot Plug Event support to firmware cxl: fix nested locking hang during EEH hotplug powerpc/xmon: Dump memory in CPU endian format powerpc/pseries: Revert 'Auto-online hotplugged memory' powerpc/powernv: Make PCI non-optional powerpc/64: Implement clear_bit_unlock_is_negative_byte() powerpc/powernv: Remove unused variable in pnv_pci_sriov_disable() powerpc/kernel: Remove error message in pcibios_setup_phb_resources() powerpc/mm: Fix typo in set_pte_at() pci/hotplug/pnv-php: Disable MSI and PCI device properly pci/hotplug/pnv-php: Disable surprise hotplug capability on conflicts pci/hotplug/pnv-php: Remove WARN_ON() in pnv_php_put_slot() powerpc: Add POWER9 architected mode to cputable powerpc/perf: use is_kernel_addr macro in perf_get_misc_flags() powerpc/perf: Avoid FAB_*_MATCH checks for power9 powerpc/perf: Add restrictions to PMC5 in power9 DD1 powerpc/perf: Use Instruction Counter value ...
| * powerpc/8xx: Implement hw_breakpointChristophe Leroy2017-01-251-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements HW breakpoint on the 8xx. The 8xx has capability to manage HW breakpoints, which is slightly different than BOOK3S: 1/ The breakpoint match doesn't trigger a DSI exception but a dedicated data breakpoint exception. 2/ The breakpoint happens after the instruction has completed, no need to single step or emulate the instruction, 3/ Matched address is not set in DAR but in BAR, 4/ DABR register doesn't exist, instead we have registers LCTRL1, LCTRL2 and CMPx registers, 5/ The match on one comparator is not on a double word but on a single word. The patch does: 1/ Prepare the dedicated registers in call to __set_dabr(). In order to emulate the double word handling of BOOK3S, comparator E is set to DABR address value and comparator F to address + 4. Then breakpoint 1 is set to match comparator E or F, 2/ Skip the singlestepping stage when compiled for CONFIG_PPC_8xx, 3/ Implement the exception. In that exception, the matched address is taken from SPRN_BAR and manage as if it was from SPRN_DAR. 4/ I/D TLB error exception routines perform a tlbie on bad TLBs. That tlbie triggers the breakpoint exception when performed on the breakpoint address. For this reason, the routine returns if the match is from one of those two tlbie. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <oss@buserror.net>
* | powerpc: Revert the initial stack protector supportMichael Ellerman2017-01-241-6/+0
|/ | | | | | | | | | | | | | | | Unfortunately the stack protector support we merged recently only works on some toolchains. If the toolchain is built without glibc support everything works fine, but if glibc is built then it leads to a panic at boot. The solution is not rc5 material, so revert the support for now. This reverts commits: 6533b7c16ee5 ("powerpc: Initial stack protector (-fstack-protector) support") 902e06eb86cd ("powerpc/32: Change the stack protector canary value per task") Fixes: 6533b7c16ee5 ("powerpc: Initial stack protector (-fstack-protector) support") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* Merge tag 'powerpc-4.10-1' of ↵Linus Torvalds2016-12-161-18/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights include: - Support for the kexec_file_load() syscall, which is a prereq for secure and trusted boot. - Prevent kernel execution of userspace on P9 Radix (similar to SMEP/PXN). - Sort the exception tables at build time, to save time at boot, and store them as relative offsets to save space in the kernel image & memory. - Allow building the kernel with thin archives, which should allow us to build an allyesconfig once some other fixes land. - Build fixes to allow us to correctly rebuild when changing the kernel endian from big to little or vice versa. - Plumbing so that we can avoid doing a full mm TLB flush on P9 Radix. - Initial stack protector support (-fstack-protector). - Support for dumping the radix (aka. Linux) and hash page tables via debugfs. - Fix an oops in cxl coredump generation when cxl_get_fd() is used. - Freescale updates from Scott: "Highlights include 8xx hugepage support, qbman fixes/cleanup, device tree updates, and some misc cleanup." - Many and varied fixes and minor enhancements as always. Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anshuman Khandual, Anton Blanchard, Balbir Singh, Bartlomiej Zolnierkiewicz, Christophe Jaillet, Christophe Leroy, Denis Kirjanov, Elimar Riesebieter, Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff Levand, Jack Miller, Johan Hovold, Lars-Peter Clausen, Libin, Madhavan Srinivasan, Michael Neuling, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Pan Xinhui, Peter Senna Tschudin, Rashmica Gupta, Rui Teng, Russell Currey, Scott Wood, Simon Guo, Suraj Jitindar Singh, Thiago Jung Bauermann, Tobias Klauser, Vaibhav Jain" [ And thanks to Michael, who took time off from a new baby to get this pull request done. - Linus ] * tag 'powerpc-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (174 commits) powerpc/fsl/dts: add FMan node for t1042d4rdb powerpc/fsl/dts: add sg_2500_aqr105_phy4 alias on t1024rdb powerpc/fsl/dts: add QMan and BMan nodes on t1024 powerpc/fsl/dts: add QMan and BMan nodes on t1023 soc/fsl/qman: test: use DEFINE_SPINLOCK() powerpc/fsl-lbc: use DEFINE_SPINLOCK() powerpc/8xx: Implement support of hugepages powerpc: get hugetlbpage handling more generic powerpc: port 64 bits pgtable_cache to 32 bits powerpc/boot: Request no dynamic linker for boot wrapper soc/fsl/bman: Use resource_size instead of computation soc/fsl/qe: use builtin_platform_driver powerpc/fsl_pmc: use builtin_platform_driver powerpc/83xx/suspend: use builtin_platform_driver powerpc/ftrace: Fix the comments for ftrace_modify_code powerpc/perf: macros for power9 format encoding powerpc/perf: power9 raw event format encoding powerpc/perf: update attribute_group data structure powerpc/perf: factor out the event format field powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown ...
| * powerpc: Initial stack protector (-fstack-protector) supportChristophe Leroy2016-11-231-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | Partialy copied from commit c743f38013aef ("ARM: initial stack protector (-fstack-protector) support") This is the very basic stuff without the changing canary upon task switch yet. Just the Kconfig option and a constant canary value initialized at boot time. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * powerpc: Revert Load Monitor Register SupportMichael Neuling2016-11-141-18/+0
| | | | | | | | | | | | | | | | | | | | | | Load monitored is no longer supported on POWER9 so let's remove the code. This reverts commit bd3ea317fddf ("powerpc: Load Monitor Register Support"). Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* | powerpc/oops: Fix missing pr_cont()s in instruction dumpAndrew Donnellan2016-11-121-5/+5
| | | | | | | | | | | | | | | | | | | | Since the KERN_CONT changes, the current code in show_instructions() prints out a whole bunch of unnecessary newlines. Change occurrences of printk("\n") to pr_cont("\n"). While we're here, change all the other cases of printk(KERN_CONT ...) to pr_cont() as well. Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* | powerpc/oops: Fix missing pr_cont()s in show_regs()Michael Ellerman2016-11-121-8/+8
| | | | | | | | | | | | | | | | | | Fix up our oops output by converting continuation lines to use pr_cont(). Some of these are dubious, eg. printing a continuation line which starts with a newline, but seem to work OK for now. This whole function needs a rewrite in the next release. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* | powerpc/oops: Fix missing pr_cont()s in print_msr_bits() et. al.Michael Ellerman2016-11-121-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the KERN_CONT changes these are being horribly split across lines, for example: MSR: 8000000000009033 < SF,EE ,ME,IR ,DR,RI ,LE> So fix it by using pr_cont() where appropriate. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* | powerpc/oops: Fix missing pr_cont()s in show_stack()Michael Ellerman2016-11-121-3/+3
|/ | | | | | | | | Previously we got away with printing the stack trace in multiple pieces and it usually looked right. But since commit 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines"), KERN_CONT is now required when printing continuation lines. Use pr_cont() as appropriate. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/process: Fix CONFIG_ALIVEC typo in restore_tm_state()Valentin Rothberg2016-10-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | It should be ALTIVEC, not ALIVEC. Cyril explains: If a thread performs a transaction with altivec and then gets preempted for whatever reason, this bug may cause the kernel to not re-enable altivec when that thread runs again. This will result in an altivec unavailable fault, when that fault happens inside a user transaction the kernel has no choice but to enable altivec and doom the transaction. The result is that transactions using altivec may get aborted more often than they should. The difficulty in catching this with a selftest is my deliberate use of the word may above. Optimisations to avoid FPU/altivec/VSX faults mean that the kernel will always leave them on for 255 switches. This code prevents the kernel turning it off if it got to the 256th switch (and userspace was transactional). Fixes: dc16b553c949 ("powerpc: Always restore FPU/VEC/VSX if hardware transactional memory in use") Reviewed-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc: tm: Enable transactional memory (TM) lazily for userspaceCyril Bur2016-10-041-5/+23
| | | | | | | | | | | | | | | Currently the MSR TM bit is always set if the hardware is TM capable. This adds extra overhead as it means the TM SPRS (TFHAR, TEXASR and TFAIR) must be swapped for each process regardless of if they use TM. For processes that don't use TM the TM MSR bit can be turned off allowing the kernel to avoid the expensive swap of the TM registers. A TM unavailable exception will occur if a thread does use TM and the kernel will enable MSR_TM and leave it so for some time afterwards. Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc: tm: Rename transct_(*) to ck(\1)_stateCyril Bur2016-10-041-2/+2
| | | | | | | | Make the structures being used for checkpointed state named consistently with the pt_regs/ckpt_regs. Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc: tm: Always use fp_state and vr_state to store live registersCyril Bur2016-10-041-61/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is currently an inconsistency as to how the entire CPU register state is saved and restored when a thread uses transactional memory (TM). Using transactional memory results in the CPU having duplicated (almost) all of its register state. This duplication results in a set of registers which can be considered 'live', those being currently modified by the instructions being executed and another set that is frozen at a point in time. On context switch, both sets of state have to be saved and (later) restored. These two states are often called a variety of different things. Common terms for the state which only exists after the CPU has entered a transaction (performed a TBEGIN instruction) in hardware are 'transactional' or 'speculative'. Between a TBEGIN and a TEND or TABORT (or an event that causes the hardware to abort), regardless of the use of TSUSPEND the transactional state can be referred to as the live state. The second state is often to referred to as the 'checkpointed' state and is a duplication of the live state when the TBEGIN instruction is executed. This state is kept in the hardware and will be rolled back to on transaction failure. Currently all the registers stored in pt_regs are ALWAYS the live registers, that is, when a thread has transactional registers their values are stored in pt_regs and the checkpointed state is in ckpt_regs. A strange opposite is true for fp_state/vr_state. When a thread is non transactional fp_state/vr_state holds the live registers. When a thread has initiated a transaction fp_state/vr_state holds the checkpointed state and transact_fp/transact_vr become the structure which holds the live state (at this point it is a transactional state). This method creates confusion as to where the live state is, in some circumstances it requires extra work to determine where to put the live state and prevents the use of common functions designed (probably before TM) to save the live state. With this patch pt_regs, fp_state and vr_state all represent the same thing and the other structures [pending rename] are for checkpointed state. Acked-by: Simon Guo <wei.guo.simon@gmail.com> Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc: Never giveup a reclaimed thread when enabling kernel {fp, altivec, vsx}Cyril Bur2016-10-041-3/+36
| | | | | | | | | | | | | | | | | | | After a thread is reclaimed from its active or suspended transactional state the checkpointed state exists on CPU, this state (along with the live/transactional state) has been saved in its entirety by the reclaiming process. There exists a sequence of events that would cause the kernel to call one of enable_kernel_fp(), enable_kernel_altivec() or enable_kernel_vsx() after a thread has been reclaimed. These functions save away any user state on the CPU so that the kernel can use the registers. Not only is this saving away unnecessary at this point, it is actually incorrect. It causes a save of the checkpointed state to the live structures within the thread struct thus destroying the true live state for that thread. Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc: Return the new MSR from msr_check_and_set()Cyril Bur2016-10-041-1/+3
| | | | | | | | | | msr_check_and_set() always performs a mfmsr() to determine if it needs to perform an mtmsr(), as mfmsr() can be a costly operation msr_check_and_set() could return the MSR now on the CPU to avoid callers of msr_check_and_set having to make their own mfmsr() call. Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc: Add check_if_tm_restore_required() to giveup_all()Cyril Bur2016-10-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | giveup_all() causes FPU/VMX/VSX facilities to be disabled in a threads MSR. If the thread performing the giveup was transactional, the kernel must record which facilities were in use before the giveup as the thread must have these facilities re-enabled on return to userspace. >From process.c: /* * This is called if we are on the way out to userspace and the * TIF_RESTORE_TM flag is set. It checks if we need to reload * FP and/or vector state and does so if necessary. * If userspace is inside a transaction (whether active or * suspended) and FP/VMX/VSX instructions have ever been enabled * inside that transaction, then we have to keep them enabled * and keep the FP/VMX/VSX state loaded while ever the transaction * continues. The reason is that if we didn't, and subsequently * got a FP/VMX/VSX unavailable interrupt inside a transaction, * we don't know whether it's the same transaction, and thus we * don't know which of the checkpointed state and the transactional * state to use. */ Calling check_if_tm_restore_required() will set TIF_RESTORE_TM and save the MSR if needed. Fixes: c208505 ("powerpc: create giveup_all()") Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc: Always restore FPU/VEC/VSX if hardware transactional memory in useCyril Bur2016-10-041-3/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Comment from arch/powerpc/kernel/process.c:967: If userspace is inside a transaction (whether active or suspended) and FP/VMX/VSX instructions have ever been enabled inside that transaction, then we have to keep them enabled and keep the FP/VMX/VSX state loaded while ever the transaction continues. The reason is that if we didn't, and subsequently got a FP/VMX/VSX unavailable interrupt inside a transaction, we don't know whether it's the same transaction, and thus we don't know which of the checkpointed state and the ransactional state to use. restore_math() restore_fp() and restore_altivec() currently may not restore the registers. It doesn't appear that this is more serious than a performance penalty. If the math registers aren't restored the userspace thread will still be run with the facility disabled. Userspace will not be able to read invalid values. On the first access it will take an facility unavailable exception and the kernel will detected an active transaction, at which point it will abort the transaction. There is the possibility for a pathological case preventing any progress by transactions, however, transactions are never guaranteed to make progress. Fixes: 70fe3d9 ("powerpc: Restore FPU/VEC/VSX if previously used") Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/sparse: Add more assembler prototypesDaniel Axtens2016-09-131-0/+1
| | | | | | | | Another set of things that are only called from assembler and so need prototypes to keep sparse happy. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/ptrace: Fix coredump since ptrace TM changesCyril Bur2016-08-101-20/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 8d460f6156cd ("powerpc/process: Add the function flush_tmregs_to_thread") added flush_tmregs_to_thread() and included the assumption that it would only be called for a task which is not current. Although this is correct for ptrace, when generating a core dump, some of the routines which call flush_tmregs_to_thread() are called. This leads to a WARNing such as: Not expecting ptrace on self: TM regs may be incorrect ------------[ cut here ]------------ WARNING: CPU: 123 PID: 7727 at arch/powerpc/kernel/process.c:1088 flush_tmregs_to_thread+0x78/0x80 CPU: 123 PID: 7727 Comm: libvirtd Not tainted 4.8.0-rc1-gcc6x-g61e8a0d #1 task: c000000fe631b600 task.stack: c000000fe63b0000 NIP: c00000000001a1a8 LR: c00000000001a1a4 CTR: c000000000717780 REGS: c000000fe63b3420 TRAP: 0700 Not tainted (4.8.0-rc1-gcc6x-g61e8a0d) MSR: 900000010282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 28004222 XER: 20000000 ... NIP [c00000000001a1a8] flush_tmregs_to_thread+0x78/0x80 LR [c00000000001a1a4] flush_tmregs_to_thread+0x74/0x80 Call Trace: flush_tmregs_to_thread+0x74/0x80 (unreliable) vsr_get+0x64/0x1a0 elf_core_dump+0x604/0x1430 do_coredump+0x5fc/0x1200 get_signal+0x398/0x740 do_signal+0x54/0x2b0 do_notify_resume+0x98/0xb0 ret_from_except_lite+0x70/0x74 So fix flush_tmregs_to_thread() to detect the case where it is called on current, and a transaction is active, and in that case flush the TM regs to the thread_struct. This patch also moves flush_tmregs_to_thread() into ptrace.c as it is only called from that file. Fixes: 8d460f6156cd ("powerpc/process: Add the function flush_tmregs_to_thread") Signed-off-by: Cyril Bur <cyrilbur@gmail.com> [mpe: Flesh out change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/process: Add the function flush_tmregs_to_threadAnshuman Khandual2016-08-011-0/+20
| | | | | | | | | | | This patch creates a function flush_tmregs_to_thread which will then be used by subsequent patches in this series. The function checks for self tracing ptrace interface attempts while in the TM context and logs appropriate warning message. Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Simon Guo <wei.guo.simon@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc: Move cpu_has_feature() to a separate fileKevin Hao2016-08-011-0/+1
| | | | | | | | | | | | | | | | | We plan to use jump label for cpu_has_feature(). In order to implement this we need to include the linux/jump_label.h in asm/cputable.h. Unfortunately if we do that it leads to an include loop. The root of the problem seems to be that reg.h needs cputable.h (for CPU_FTRs), and then cputable.h via jump_label.h eventually pulls in hw_irq.h which needs reg.h (for MSR_EE). So move cpu_has_feature() to a separate file on its own. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> [mpe: Rename to cpu_has_feature.h and flesh out change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* Merge tag 'powerpc-4.7-5' into nextMichael Ellerman2016-07-151-0/+10
|\ | | | | | | | | Pull in the fixes we sent during 4.7, we have code we want to merge into next that depends on some of them.
| * powerpc/tm: Always reclaim in start_thread() for exec() class syscallsCyril Bur2016-06-271-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Userspace can quite legitimately perform an exec() syscall with a suspended transaction. exec() does not return to the old process, rather it load a new one and starts that, the expectation therefore is that the new process starts not in a transaction. Currently exec() is not treated any differently to any other syscall which creates problems. Firstly it could allow a new process to start with a suspended transaction for a binary that no longer exists. This means that the checkpointed state won't be valid and if the suspended transaction were ever to be resumed and subsequently aborted (a possibility which is exceedingly likely as exec()ing will likely doom the transaction) the new process will jump to invalid state. Secondly the incorrect attempt to keep the transactional state while still zeroing state for the new process creates at least two TM Bad Things. The first triggers on the rfid to return to userspace as start_thread() has given the new process a 'clean' MSR but the suspend will still be set in the hardware MSR. The second TM Bad Thing triggers in __switch_to() as the processor is still transactionally suspended but __switch_to() wants to zero the TM sprs for the new process. This is an example of the outcome of calling exec() with a suspended transaction. Note the first 700 is likely the first TM bad thing decsribed earlier only the kernel can't report it as we've loaded userspace registers. c000000000009980 is the rfid in fast_exception_return() Bad kernel stack pointer 3fffcfa1a370 at c000000000009980 Oops: Bad kernel stack pointer, sig: 6 [#1] CPU: 0 PID: 2006 Comm: tm-execed Not tainted NIP: c000000000009980 LR: 0000000000000000 CTR: 0000000000000000 REGS: c00000003ffefd40 TRAP: 0700 Not tainted MSR: 8000000300201031 <SF,ME,IR,DR,LE,TM[SE]> CR: 00000000 XER: 00000000 CFAR: c0000000000098b4 SOFTE: 0 PACATMSCRATCH: b00000010000d033 GPR00: 0000000000000000 00003fffcfa1a370 0000000000000000 0000000000000000 GPR04: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR12: 00003fff966611c0 0000000000000000 0000000000000000 0000000000000000 NIP [c000000000009980] fast_exception_return+0xb0/0xb8 LR [0000000000000000] (null) Call Trace: Instruction dump: f84d0278 e9a100d8 7c7b03a6 e84101a0 7c4ff120 e8410170 7c5a03a6 e8010070 e8410080 e8610088 e8810090 e8210078 <4c000024> 48000000 e8610178 88ed023b Kernel BUG at c000000000043e80 [verbose debug info unavailable] Unexpected TM Bad Thing exception at c000000000043e80 (msr 0x201033) Oops: Unrecoverable exception, sig: 6 [#2] CPU: 0 PID: 2006 Comm: tm-execed Tainted: G D task: c0000000fbea6d80 ti: c00000003ffec000 task.ti: c0000000fb7ec000 NIP: c000000000043e80 LR: c000000000015a24 CTR: 0000000000000000 REGS: c00000003ffef7e0 TRAP: 0700 Tainted: G D MSR: 8000000300201033 <SF,ME,IR,DR,RI,LE,TM[SE]> CR: 28002828 XER: 00000000 CFAR: c000000000015a20 SOFTE: 0 PACATMSCRATCH: b00000010000d033 GPR00: 0000000000000000 c00000003ffefa60 c000000000db5500 c0000000fbead000 GPR04: 8000000300001033 2222222222222222 2222222222222222 00000000ff160000 GPR08: 0000000000000000 800000010000d033 c0000000fb7e3ea0 c00000000fe00004 GPR12: 0000000000002200 c00000000fe00000 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 c0000000fbea7410 00000000ff160000 GPR24: c0000000ffe1f600 c0000000fbea8700 c0000000fbea8700 c0000000fbead000 GPR28: c000000000e20198 c0000000fbea6d80 c0000000fbeab680 c0000000fbea6d80 NIP [c000000000043e80] tm_restore_sprs+0xc/0x1c LR [c000000000015a24] __switch_to+0x1f4/0x420 Call Trace: Instruction dump: 7c800164 4e800020 7c0022a6 f80304a8 7c0222a6 f80304b0 7c0122a6 f80304b8 4e800020 e80304a8 7c0023a6 e80304b0 <7c0223a6> e80304b8 7c0123a6 4e800020 This fixes CVE-2016-5828. Fixes: bc2a9408fa65 ("powerpc: Hook in new transactional memory code") Cc: stable@vger.kernel.org # v3.9+ Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* | powerpc: Load Monitor Register SupportJack Miller2016-06-211-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This enables new registers, LMRR and LMSER, that can trigger an EBB in userspace code when a monitored load (via the new ldmx instruction) loads memory from a monitored space. This facility is controlled by a new FSCR bit, LM. This patch disables the FSCR LM control bit on task init and enables that bit when a load monitor facility unavailable exception is taken for using it. On context switch, this bit is then used to determine whether the two relevant registers are saved and restored. This is done lazily for performance reasons. Signed-off-by: Jack Miller <jack@codezen.org> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* | powerpc: Improve FSCR init and context switchingMichael Neuling2016-06-211-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a few issues with FSCR init and switching. In commit 152d523e6307 ("powerpc: Create context switch helpers save_sprs() and restore_sprs()") we moved the setting of the FSCR register from inside an CPU_FTR_ARCH_207S section to inside just a CPU_FTR_ARCH_DSCR section. Hence we are setting FSCR on POWER6/7 where the FSCR doesn't exist. This is harmless but we shouldn't do it. Also, we can simplify the FSCR context switch. We don't need to go through the calculation involving dscr_inherit. We can just restore what we saved last time. We also set an initial value in INIT_THREAD, so that pid 1 which is cloned from that gets a sane value. Based on patch by Jack Miller. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* | powerpc: Various typo fixesMichael Ellerman2016-06-141-1/+1
| | | | | | | | | | Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* | powerpc: Avoid load hit store in __giveup_fpu() and __giveup_altivec()Anton Blanchard2016-06-141-4/+12
|/ | | | | | | | | | | | | | | | | | | | | In both __giveup_fpu() and __giveup_altivec() we make two modifications to tsk->thread.regs->msr. gcc decides to do a read/modify/write of each change, so we end up with a load hit store: ld r9,264(r10) rldicl r9,r9,50,1 rotldi r9,r9,14 std r9,264(r10) ... ld r9,264(r10) rldicl r9,r9,40,1 rotldi r9,r9,24 std r9,264(r10) Fix this by using a temporary. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* exit_thread: remove empty bodiesJiri Slaby2016-05-201-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Define HAVE_EXIT_THREAD for archs which want to do something in exit_thread. For others, let's define exit_thread as an empty inline. This is a cleanup before we change the prototype of exit_thread to accept a task parameter. [akpm@linux-foundation.org: fix mips] Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: "David S. Miller" <davem@davemloft.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Chris Zankel <chris@zankel.net> Cc: David Howells <dhowells@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Jonas Bonn <jonas@southpole.se> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mikael Starvik <starvik@axis.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@arm.linux.org.uk> Cc: Steven Miao <realmz6@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* powerpc/mm/radix: Use STD_MMU_64 to properly isolate hash related codeAneesh Kumar K.V2016-05-111-6/+9
| | | | | | | | | | We also use MMU_FTR_RADIX to branch out from code path specific to hash. No functionality change. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* Merge branch 'topic/livepatch' into nextMichael Ellerman2016-04-181-1/+5
|\ | | | | | | | | Merge the support for live patching on ppc64le using mprofile-kernel. This branch has also been merged into the livepatching tree for v4.7.
| * powerpc/livepatch: Add livepatch stack to struct thread_infoMichael Ellerman2016-04-141-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to support live patching we need to maintain an alternate stack of TOC & LR values. We use the base of the stack for this, and store the "live patch stack pointer" in struct thread_info. Unlike the other fields of thread_info, we can not statically initialise that value, so it must be done at run time. This patch just adds the code to support that, it is not enabled until the next patch which actually adds live patch support. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Balbir Singh <bsingharora@gmail.com>
* | powerpc: sparse: Include headers for __weak symbolsDaniel Axtens2016-04-121-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Sometimes when sparse warns about undefined symbols, it isn't because they should have 'static' added, it's because they're overriding __weak symbols defined elsewhere, and the header has been missed. Fix a few of them by adding appropriate headers. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* | powerpc/process: Fix altivec SPR not being savedOliver O'Halloran2016-03-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In save_sprs() in process.c contains the following test: if (cpu_has_feature(cpu_has_feature(CPU_FTR_ALTIVEC))) t->vrsave = mfspr(SPRN_VRSAVE); CPU feature with the mask 0x1 is CPU_FTR_COHERENT_ICACHE so the test is equivilent to: if (cpu_has_feature(CPU_FTR_ALTIVEC) && cpu_has_feature(CPU_FTR_COHERENT_ICACHE)) On CPUs without support for both (i.e G5) this results in vrsave not being saved between context switches. The vector register save/restore code doesn't use VRSAVE to determine which registers to save/restore, but the value of VRSAVE is used to determine if altivec is being used in several code paths. Fixes: 152d523e6307 ("powerpc: Create context switch helpers save_sprs() and restore_sprs()") Cc: stable@vger.kernel.org Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* | Merge tag 'powerpc-4.6-1' of ↵Linus Torvalds2016-03-191-17/+151
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "This was delayed a day or two by some build-breakage on old toolchains which we've now fixed. There's two PCI commits both acked by Bjorn. There's one commit to mm/hugepage.c which is (co)authored by Kirill. Highlights: - Restructure Linux PTE on Book3S/64 to Radix format from Paul Mackerras - Book3s 64 MMU cleanup in preparation for Radix MMU from Aneesh Kumar K.V - Add POWER9 cputable entry from Michael Neuling - FPU/Altivec/VSX save/restore optimisations from Cyril Bur - Add support for new ftrace ABI on ppc64le from Torsten Duwe Various cleanups & minor fixes from: - Adam Buchbinder, Andrew Donnellan, Balbir Singh, Christophe Leroy, Cyril Bur, Luis Henriques, Madhavan Srinivasan, Pan Xinhui, Russell Currey, Sukadev Bhattiprolu, Suraj Jitindar Singh. General: - atomics: Allow architectures to define their own __atomic_op_* helpers from Boqun Feng - Implement atomic{, 64}_*_return_* variants and acquire/release/ relaxed variants for (cmp)xchg from Boqun Feng - Add powernv_defconfig from Jeremy Kerr - Fix BUG_ON() reporting in real mode from Balbir Singh - Add xmon command to dump OPAL msglog from Andrew Donnellan - Add xmon command to dump process/task similar to ps(1) from Douglas Miller - Clean up memory hotplug failure paths from David Gibson pci/eeh: - Redesign SR-IOV on PowerNV to give absolute isolation between VFs from Wei Yang. - EEH Support for SRIOV VFs from Wei Yang and Gavin Shan. - PCI/IOV: Rename and export virtfn_{add, remove} from Wei Yang - PCI: Add pcibios_bus_add_device() weak function from Wei Yang - MAINTAINERS: Update EEH details and maintainership from Russell Currey cxl: - Support added to the CXL driver for running on both bare-metal and hypervisor systems, from Christophe Lombard and Frederic Barrat. - Ignore probes for virtual afu pci devices from Vaibhav Jain perf: - Export Power8 generic and cache events to sysfs from Sukadev Bhattiprolu - hv-24x7: Fix usage with chip events, display change in counter values, display domain indices in sysfs, eliminate domain suffix in event names, from Sukadev Bhattiprolu Freescale: - Updates from Scott: "Highlights include 8xx optimizations, 32-bit checksum optimizations, 86xx consolidation, e5500/e6500 cpu hotplug, more fman and other dt bits, and minor fixes/cleanup" * tag 'powerpc-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (179 commits) powerpc: Fix unrecoverable SLB miss during restore_math() powerpc/8xx: Fix do_mtspr_cpu6() build on older compilers powerpc/rcpm: Fix build break when SMP=n powerpc/book3e-64: Use hardcoded mttmr opcode powerpc/fsl/dts: Add "jedec,spi-nor" flash compatible powerpc/T104xRDB: add tdm riser card node to device tree powerpc32: PAGE_EXEC required for inittext powerpc/mpc85xx: Add pcsphy nodes to FManV3 device tree powerpc/mpc85xx: Add MDIO bus muxing support to the board device tree(s) powerpc/86xx: Introduce and use common dtsi powerpc/86xx: Update device tree powerpc/86xx: Move dts files to fsl directory powerpc/86xx: Switch to kconfig fragments approach powerpc/86xx: Update defconfigs powerpc/86xx: Consolidate common platform code powerpc32: Remove one insn in mulhdu powerpc32: small optimisation in flush_icache_range() powerpc: Simplify test in __dma_sync() powerpc32: move xxxxx_dcache_range() functions inline powerpc32: Remove clear_pages() and define clear_page() inline ...
| * | powerpc: Add the ability to save VSX without giving it upCyril Bur2016-03-021-12/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the ability to be able to save the VSX registers to the thread struct without giving up (disabling the facility) next time the process returns to userspace. This patch builds on a previous optimisation for the FPU and VEC registers in the thread copy path to avoid a possibly pointless reload of VSX state. Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * | powerpc: Add the ability to save Altivec without giving it upCyril Bur2016-03-021-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the ability to be able to save the VEC registers to the thread struct without giving up (disabling the facility) next time the process returns to userspace. This patch builds on a previous optimisation for the FPU registers in the thread copy path to avoid a possibly pointless reload of VEC state. Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * | powerpc: Add the ability to save FPU without giving it upCyril Bur2016-03-021-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the ability to be able to save the FPU registers to the thread struct without giving up (disabling the facility) next time the process returns to userspace. This patch optimises the thread copy path (as a result of a fork() or clone()) so that the parent thread can return to userspace with hot registers avoiding a possibly pointless reload of FPU register state. Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * | powerpc: Prepare for splitting giveup_{fpu, altivec, vsx} in twoCyril Bur2016-03-021-1/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This prepares for the decoupling of saving {fpu,altivec,vsx} registers and marking {fpu,altivec,vsx} as being unused by a thread. Currently giveup_{fpu,altivec,vsx}() does both however optimisations to task switching can be made if these two operations are decoupled. save_all() will permit the saving of registers to thread structs and leave threads MSR with bits enabled. This patch introduces no functional change. Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * | powerpc: Restore FPU/VEC/VSX if previously usedCyril Bur2016-03-021-11/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the FPU, VEC and VSX facilities are lazily loaded. This is not a problem unless a process is using these facilities. Modern versions of GCC are very good at automatically vectorising code, new and modernised workloads make use of floating point and vector facilities, even the kernel makes use of vectorised memcpy. All this combined greatly increases the cost of a syscall since the kernel uses the facilities sometimes even in syscall fast-path making it increasingly common for a thread to take an *_unavailable exception soon after a syscall, not to mention potentially taking all three. The obvious overcompensation to this problem is to simply always load all the facilities on every exit to userspace. Loading up all FPU, VEC and VSX registers every time can be expensive and if a workload does avoid using them, it should not be forced to incur this penalty. An 8bit counter is used to detect if the registers have been used in the past and the registers are always loaded until the value wraps to back to zero. Several versions of the assembly in entry_64.S were tested: 1. Always calling C. 2. Performing a common case check and then calling C. 3. A complex check in asm. After some benchmarking it was determined that avoiding C in the common case is a performance benefit (option 2). The full check in asm (option 3) greatly complicated that codepath for a negligible performance gain and the trade-off was deemed not worth it. Signed-off-by: Cyril Bur <cyrilbur@gmail.com> [mpe: Move load_vec in the struct to fill an existing hole, reword change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> fixup
| * | powerpc: Explicitly disable math features when copying threadCyril Bur2016-03-021-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently when threads get scheduled off they always giveup the FPU, Altivec (VMX) and Vector (VSX) units if they were using them. When they are scheduled back on a fault is then taken to enable each facility and load registers. As a result explicitly disabling FPU/VMX/VSX has not been necessary. Future changes and optimisations remove this mandatory giveup and fault which could cause calls such as clone() and fork() to copy threads and run them later with FPU/VMX/VSX enabled but no registers loaded. This patch starts the process of having MSR_{FP,VEC,VSX} mean that a threads registers are hot while not having MSR_{FP,VEC,VSX} means that the registers must be loaded. This allows for a smarter return to userspace. Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* / mm: ASLR: use get_random_long()Daniel Cashman2016-02-271-2/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace calls to get_random_int() followed by a cast to (unsigned long) with calls to get_random_long(). Also address shifting bug which, in case of x86 removed entropy mask for mmap_rnd_bits values > 31 bits. Signed-off-by: Daniel Cashman <dcashman@android.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: David S. Miller <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Nick Kralevich <nnk@google.com> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Mark Salyzyn <salyzyn@android.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge tag 'powerpc-4.4-3' into nextMichael Ellerman2015-12-141-0/+18
|\ | | | | | | | | | | | | | | | | | | Merge the two TM fixes we merged in 4.4. We are about to merge selftests for these, and without the fixes the selftests will oops. powerpc fixes for 4.4 #2 - tm: Block signal return from setting invalid MSR state from Michael Neuling - tm: Check for already reclaimed tasks from Michael Neuling
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-07 09:38:56 +0000