summaryrefslogtreecommitdiffstats
path: root/arch/s390/kernel
Commit message (Collapse)AuthorAgeFilesLines
* [S390] facility detection: remove unused variableHeiko Carstens2010-10-291-2/+0
| | | | | | | | arch/s390/kernel/early.c: In function 'setup_hpage': arch/s390/kernel/early.c:285:15: warning: unused variable 'facilities' Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] topology: fix cpu masks for topology=off caseHeiko Carstens2010-10-291-2/+4
| | | | | | | | | | | | | Fix cpu masks for 'topology=off' case. Folding of the scheduling domains happen in such a way that everything belongs to the MC domain instead of the CPU doimain. This should fix a performance regression introduced with eafd2b6d "[S390] topology: use default MC domain initializer" and also makes sure we have the same behavious as if CONFIG_SCHED_MC was not selected at all. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] topology: add SCHED_MC config optionHeiko Carstens2010-10-291-0/+2
| | | | | | | | | | This allows us to easily check for performance differences seen with !CONFIG_SCHED_MC and topology=off. Actually there shouldn't be any (besides a small overhead because of additional code). Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] Add z196 machine type to setup_hwcapsHeiko Carstens2010-10-291-0/+3
| | | | | | | Add machine type for zEnterprise 196 to elf platform detection. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* ptrace: change signature of arch_ptrace()Namhyung Kim2010-10-271-1/+2
| | | | | | | | | | | | | | | Fix up the arguments to arch_ptrace() to take account of the fact that @addr and @data are now unsigned long rather than long as of a preceding patch in this series. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: <linux-arch@vger.kernel.org> Acked-by: Roland McGrath <roland@redhat.com> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [S390] topology: export cpu topology via proc/sysinfoHeiko Carstens2010-10-252-3/+34
| | | | | | | | | | | | | | | | | Export the cpu configuration topology via sysinfo. Two new lines are introduced: CPU Topology HW: 0 0 0 4 6 4 CPU Topology SW: 0 0 0 0 4 24 The HW line describes the cpu topology nesting levels when the maximum nesting level is used to get the corresponding SYSIB. The SW line describes what Linux is actually using. In this case it supports only two levels (CONFIG_SCHED_BOOK off) and therefore the hardware folded the two lower levels in the SYSIB response block. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] topology: move topology sysinfo codeHeiko Carstens2010-10-251-54/+21
| | | | | | | | Move the topology sysinfo SYSIB definitions to the proper place in asm/sysinfo.h where they should be. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] topology: clean up facility detectionHeiko Carstens2010-10-252-9/+7
| | | | | | | | Move cpu topology facility detection to early setup code where it should be. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] cleanup facility list handlingMartin Schwidefsky2010-10-255-32/+40
| | | | | | | Store the facility list once at system startup with stfl/stfle and reuse the result for all facility tests. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] topology: change defaultHeiko Carstens2010-10-251-3/+3
| | | | | | | | | Switch default value of the kernel parameter 'topology' from off to on. Various performance measurements have finally shown that there are no (known) regressions anywhere. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] smp: use correct cpu address in print_cpu_info()Heiko Carstens2010-10-251-1/+1
| | | | | | | | | | | | | | Up to now print_cpu_info() uses the cpu address stored in it's local lowcore to print a message to the console. The cpu address in the lowcore is (in this case) however not the physical cpu address of the local cpu. It's the address of the cpu that issued the sigp restart which started the local cpu. Fix this by using the store cpu address instruction instead. It's not that anybody really cares since this is broken since more than ten years... Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] remove ieee_instruction_pointer from thread_structMartin Schwidefsky2010-10-252-3/+1
| | | | | | | | | The ieee_instruction_pointer can not be read from user space anymore since git commit 613e1def6b52c399a8b72a5e11bc2e57d2546fb8, the ptrace interface always returns zero. Remove it from the thread_struct. It is still present in the user_regs_struct for compatability reasons. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] cleanup system call parameter setupMartin Schwidefsky2010-10-252-5/+5
| | | | | | | | Do the setup of the stack overflow argument for the sixth system call parameter right before the branch to the system call function. That simplifies the system call parameter access code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] cleanup lowcore access from external interruptsMartin Schwidefsky2010-10-258-18/+26
| | | | | | | Read external interrupts parameters from the lowcore in the first level interrupt handler in entry[64].S. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] cleanup lowcore access from program checksMartin Schwidefsky2010-10-255-150/+96
| | | | | | | | | Read all required fields for program checks from the lowcore in the first level interrupt handler in entry[64].S. If the context that caused the fault was enabled for interrupts we can now re-enable the irqs in entry[64].S. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] Add config option for z196 code generation.Heiko Carstens2010-10-251-2/+6
| | | | | | | | Add a kernel config option for the IBM zEnterprise 196. This will produce faster code on newer compilers using the -march=z196 option. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] sysinfo: display capacity adjustment indicatorHeiko Carstens2010-10-251-0/+7
| | | | | | | | Display machine capacity adjustment indicator and capacity change reason if available in /proc/sysinfo. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] add z196 instructions to kernel disassemblerMartin Schwidefsky2010-10-251-13/+132
| | | | | | Add the new instructions introduced with z196 to the kernel disassembler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] add support for nonquiescing sskeMartin Schwidefsky2010-10-252-2/+4
| | | | | | | | Improve performance of the sske operation by using the nonquiescing variant if the affected page has no mappings established. On machines with no support for the new sske variant the mask bit will be ignored. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] cpu hotplug/idle: move cpu_die call to enabled contextHeiko Carstens2010-10-251-5/+5
| | | | | | | | | | | | | | | | There is no difference if cpu_die is called from enabled or disabled context. Except that the fast_gup code might be called via cpu_die -> idle_task_exit -> __mm_drop -> crst_table_free. Which in turn grabs and releases a spinlock using the _bh ops, which is not allowed in irq disabled context, since spin_unlock_bh will unconditionally enable interrupts again. To get rid of the warning emitted by the softirq code just move the code to enabled context. In this case this doesn't fix a bug, we just get rid of a warning. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds2010-10-221-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: vfs: make no_llseek the default vfs: don't use BKL in default_llseek llseek: automatically add .llseek fop libfs: use generic_file_llseek for simple_attr mac80211: disallow seeks in minstrel debug code lirc: make chardev nonseekable viotape: use noop_llseek raw: use explicit llseek file operations ibmasmfs: use generic_file_llseek spufs: use llseek in all file operations arm/omap: use generic_file_llseek in iommu_debug lkdtm: use generic_file_llseek in debugfs net/wireless: use generic_file_llseek in debugfs drm: use noop_llseek
| * llseek: automatically add .llseek fopArnd Bergmann2010-10-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-irqflagsLinus Torvalds2010-10-211-2/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-irqflags: Fix IRQ flag handling naming MIPS: Add missing #inclusions of <linux/irq.h> smc91x: Add missing #inclusion of <linux/irq.h> Drop a couple of unnecessary asm/system.h inclusions SH: Add missing consts to sys_execve() declaration Blackfin: Rename IRQ flags handling functions Blackfin: Add missing dep to asm/irqflags.h Blackfin: Rename DES PC2() symbol to avoid collision Blackfin: Split the BF532 BFIN_*_FIO_FLAG() functions to their own header Blackfin: Split PLL code from mach-specific cdef headers
| * | Fix IRQ flag handling namingDavid Howells2010-10-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the IRQ flag handling naming. In linux/irqflags.h under one configuration, it maps: local_irq_enable() -> raw_local_irq_enable() local_irq_disable() -> raw_local_irq_disable() local_irq_save() -> raw_local_irq_save() ... and under the other configuration, it maps: raw_local_irq_enable() -> local_irq_enable() raw_local_irq_disable() -> local_irq_disable() raw_local_irq_save() -> local_irq_save() ... This is quite confusing. There should be one set of names expected of the arch, and this should be wrapped to give another set of names that are expected by users of this facility. Change this to have the arch provide: flags = arch_local_save_flags() flags = arch_local_irq_save() arch_local_irq_restore(flags) arch_local_irq_disable() arch_local_irq_enable() arch_irqs_disabled_flags(flags) arch_irqs_disabled() arch_safe_halt() Then linux/irqflags.h wraps these to provide: raw_local_save_flags(flags) raw_local_irq_save(flags) raw_local_irq_restore(flags) raw_local_irq_disable() raw_local_irq_enable() raw_irqs_disabled_flags(flags) raw_irqs_disabled() raw_safe_halt() with type checking on the flags 'arguments', and then wraps those to provide: local_save_flags(flags) local_irq_save(flags) local_irq_restore(flags) local_irq_disable() local_irq_enable() irqs_disabled_flags(flags) irqs_disabled() safe_halt() with tracing included if enabled. The arch functions can now all be inline functions rather than some of them having to be macros. Signed-off-by: David Howells <dhowells@redhat.com> [X86, FRV, MN10300] Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [Tile] Signed-off-by: Michal Simek <monstr@monstr.eu> [Microblaze] Tested-by: Catalin Marinas <catalin.marinas@arm.com> [ARM] Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [AVR] Acked-by: Tony Luck <tony.luck@intel.com> [IA-64] Acked-by: Hirokazu Takata <takata@linux-m32r.org> [M32R] Acked-by: Greg Ungerer <gerg@uclinux.org> [M68K/M68KNOMMU] Acked-by: Ralf Baechle <ralf@linux-mips.org> [MIPS] Acked-by: Kyle McMartin <kyle@mcmartin.ca> [PA-RISC] Acked-by: Paul Mackerras <paulus@samba.org> [PowerPC] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [S390] Acked-by: Chen Liqin <liqin.chen@sunplusct.com> [Score] Acked-by: Matt Fleming <matt@console-pimps.org> [SH] Acked-by: David S. Miller <davem@davemloft.net> [Sparc] Acked-by: Chris Zankel <chris@zankel.net> [Xtensa] Reviewed-by: Richard Henderson <rth@twiddle.net> [Alpha] Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> [H8300] Cc: starvik@axis.com [CRIS] Cc: jesper.nilsson@axis.com [CRIS] Cc: linux-cris-kernel@axis.com
* | | Merge branch 'linus' into sched/coreIngo Molnar2010-10-141-2/+1
|\| | | | | | | | | | | | | | | | | Merge reason: update from -rc5 to -almost-final Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * | modules: Fix module_bug_list list corruption raceLinus Torvalds2010-10-051-2/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With all the recent module loading cleanups, we've minimized the code that sits under module_mutex, fixing various deadlocks and making it possible to do most of the module loading in parallel. However, that whole conversion totally missed the rather obscure code that adds a new module to the list for BUG() handling. That code was doubly obscure because (a) the code itself lives in lib/bugs.c (for dubious reasons) and (b) it gets called from the architecture-specific "module_finalize()" rather than from generic code. Calling it from arch-specific code makes no sense what-so-ever to begin with, and is now actively wrong since that code isn't protected by the module loading lock any more. So this commit moves the "module_bug_{finalize,cleanup}()" calls away from the arch-specific code, and into the generic code - and in the process protects it with the module_mutex so that the list operations are now safe. Future fixups: - move the module list handling code into kernel/module.c where it belongs. - get rid of 'module_bug_list' and just use the regular list of modules (called 'modules' - imagine that) that we already create and maintain for other reasons. Reported-and-tested-by: Thomas Gleixner <tglx@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Adrian Bunk <bunk@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* / topology, s390: Add z11 cpu topology supportHeiko Carstens2010-09-091-57/+93
|/ | | | | | | | | | Use the extended cpu topology information that z11 machines provide to improve the scheduler's decision making. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20100831082844.604956770@de.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* [S390] fix tlb flushing vs. concurrent /proc accessesMartin Schwidefsky2010-08-241-0/+2
| | | | | | | | | | | | | | | | The tlb flushing code uses the mm_users field of the mm_struct to decide if each page table entry needs to be flushed individually with IPTE or if a global flush for the mm_struct is sufficient after all page table updates have been done. The comment for mm_users says "How many users with user space?" but the /proc code increases mm_users after it found the process structure by pid without creating a new user process. Which makes mm_users useless for the decision between the two tlb flusing methods. The current code can be confused to not flush tlb entries by a concurrent access to /proc files if e.g. a fork is in progres. The solution for this problem is to make the tlb flushing logic independent from the mm_users field. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] s390: fix build error (sys_execve)Sebastian Ott2010-08-241-2/+2
| | | | | | | | | | | | | fix this build error: arch/s390/kernel/process.c:272: error: conflicting types for 'sys_execve' arch/s390/kernel/entry.h:45: error: previous declaration of 'sys_execve' was here make[1]: *** [arch/s390/kernel/process.o] Error 1 make: *** [arch/s390/kernel] Error 2 introduced by d7627467b7a8dd6944885290a03a07ceb28c10eb Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Make do_execve() take a const filename pointerDavid Howells2010-08-171-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Make do_execve() take a const filename pointer so that kernel_execve() compiles correctly on ARM: arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type This also requires the argv and envp arguments to be consted twice, once for the pointer array and once for the strings the array points to. This is because do_execve() passes a pointer to the filename (now const) to copy_strings_kernel(). A simpler alternative would be to cast the filename pointer in do_execve() when it's passed to copy_strings_kernel(). do_execve() may not change any of the strings it is passed as part of the argv or envp lists as they are some of them in .rodata, so marking these strings as const should be fine. Further kernel_execve() and sys_execve() need to be changed to match. This has been test built on x86_64, frv, arm and mips. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Mark arguments to certain syscalls as being constDavid Howells2010-08-134-12/+12
| | | | | | | | | | | | | | | | Mark arguments to certain system calls as being const where they should be but aren't. The list includes: (*) The filename arguments of various stat syscalls, execve(), various utimes syscalls and some mount syscalls. (*) The filename arguments of some syscall helpers relating to the above. (*) The buffer argument of various write syscalls. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [S390] wire up prlimit64 and fanotify* syscallsHeiko Carstens2010-08-132-0/+27
| | | | | Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] sys_personality: follow u_long to unsigned int conversionHeiko Carstens2010-08-133-4/+4
| | | | | | | | | | commit 485d527686850d68a0e9006dd9904f19f122485e "sys_personality: change sys_personality() to accept "unsigned int" instead of u_long" changed the syscall interface for sys_personality. Just follow the common code change in our arch code to avoid confusion. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] initrd: change default load addressHeiko Carstens2010-08-091-1/+1
| | | | | | | | | | | Change default load address of the initrd in case of IPL from reader. The new load address is directly behind the kernel image. This way we can see immediatly if there are any problems with the code which tries to rescue the initrd in case the bootmem bitmap would overlap with the initrd. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Merge branch 'timers-timekeeping-for-linus' of ↵Linus Torvalds2010-08-061-4/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-timekeeping-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: um: Fix read_persistent_clock fallout kgdb: Do not access xtime directly powerpc: Clean up obsolete code relating to decrementer and timebase powerpc: Rework VDSO gettimeofday to prevent time going backwards clocksource: Add __clocksource_updatefreq_hz/khz methods x86: Convert common clocksources to use clocksource_register_hz/khz timekeeping: Make xtime and wall_to_monotonic static hrtimer: Cleanup direct access to wall_to_monotonic um: Convert to use read_persistent_clock timkeeping: Fix update_vsyscall to provide wall_to_monotonic offset powerpc: Cleanup xtime usage powerpc: Simplify update_vsyscall time: Kill off CONFIG_GENERIC_TIME time: Implement timespec_add x86: Fix vtime/file timestamp inconsistencies Trivial conflicts in Documentation/feature-removal-schedule.txt Much less trivial conflicts in arch/powerpc/kernel/time.c resolved as per Thomas' earlier merge commit 47916be4e28c ("Merge branch 'powerpc.cherry-picks' into timers/clocksource")
| * timkeeping: Fix update_vsyscall to provide wall_to_monotonic offsetJohn Stultz2010-07-271-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | update_vsyscall() did not provide the wall_to_monotoinc offset, so arch specific implementations tend to reference wall_to_monotonic directly. This limits future cleanups in the timekeeping core, so this patch fixes the update_vsyscall interface to provide wall_to_monotonic, allowing wall_to_monotonic to be made static as planned in Documentation/feature-removal-schedule.txt Signed-off-by: John Stultz <johnstul@us.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Anton Blanchard <anton@samba.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Tony Luck <tony.luck@intel.com> LKML-Reference: <1279068988-21864-7-git-send-email-johnstul@us.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | [S390] etr: fix clock synchronization raceMartin Schwidefsky2010-07-271-6/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The etr events switch-to-local and sync-check disable the synchronous clock and schedule a work queue that tries to get the clock back into sync. If another switch-to-local or sync-check event occurs while the work queue function etr_work_fn still runs the eacr.es bit and the clock_sync_word can become inconsistent because check_sync_clock only uses the clock_sync_word to determine if the clock is in sync or not. The second pass of the etr_work_fn will reset the eacr.es bit but will leave the clock_sync_word intact. Fix this race by moving the reset of the eacr.es bit into the switch-to-local and sync-check functions and by checking the eacr.es bit as well to decide if the clock needs to be synced. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] Fix IRQ tracing in case of PERHeiko Carstens2010-07-272-4/+20
|/ | | | | | | | | | | | | In case user space is single stepped (PER) the program check handler claims too early that IRQs are enabled on the return path. Subsequent checks will notice that the IRQ mask in the PSW and what lockdep thinks the IRQ mask should be do not correlate and therefore will print a warning to the console and disable lockdep. Fix this by doing all the work within the correct context. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] kprobes: add parameter check to module_free()Hendrik Brueckner2010-06-081-2/+4
| | | | | | | | | | | When unregistering kprobes, kprobes calls module_free() and always passes NULL for the mod parameter. Add a check to prevent NULL pointer dereferences. See commit 740a8de0796dd12890b3c8ddcfabfcb528b78d40 for more details. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Merge branch 'for-35' of git://repo.or.cz/linux-kbuildLinus Torvalds2010-06-011-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-35' of git://repo.or.cz/linux-kbuild: (81 commits) kbuild: Revert part of e8d400a to resolve a conflict kbuild: Fix checking of scm-identifier variable gconfig: add support to show hidden options that have prompts menuconfig: add support to show hidden options which have prompts gconfig: remove show_debug option gconfig: remove dbg_print_ptype() and dbg_print_stype() kconfig: fix zconfdump() kconfig: some small fixes add random binaries to .gitignore kbuild: Include gen_initramfs_list.sh and the file list in the .d file kconfig: recalc symbol value before showing search results .gitignore: ignore *.lzo files headerdep: perlcritic warning scripts/Makefile.lib: Align the output of LZO kbuild: Generate modules.builtin in make modules_install Revert "kbuild: specify absolute paths for cscope" kbuild: Do not unnecessarily regenerate modules.builtin headers_install: use local file handles headers_check: fix perl warnings export_report: fix perl warnings ...
| * Rename .data.nosave to .data..nosave.Denys Vlasenko2010-03-031-1/+1
| | | | | | | | | | Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
* | Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds2010-05-274-4/+7
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] fill out file list in s390 MAINTAINERS entry [S390] Add support for LZO-compressed kernels. [S390] cmm: get rid of CMM_PROC config option [S390] cmm: remove superfluous EXPORT_SYMBOLs plus cleanups [S390] dasd: unit check handling during internal cio I/O [S390] cio: unit check handling during internal I/O [S390] ccwgroup: add locking around drvdata access [S390] cio: remove stsch [S390] spp: remove KVM_AWARE_CMF config option [S390] kprobes: forbid probing of stnsm/stosm/epsw [S390] spp: fix compilation for CONFIG_32BIT [S390] atomic: implement atomic64_dec_if_positive [S390] cmm: fix crash on module unload
| * | [S390] spp: remove KVM_AWARE_CMF config optionHeiko Carstens2010-05-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This config option enables or disables three single instructions which aren't expensive. This is too fine grained. Besided that everybody who uses kvm would enable it anyway in order to debug performance problems. Just remove it. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | [S390] kprobes: forbid probing of stnsm/stosm/epswHeiko Carstens2010-05-261-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The probed instructions will be executed in a single stepped and irq disabled context. Therefore the results of stnsm, stosm and epsw would be wrong if probed. So let's just disallow probing of these functions. If really needed a fixup could be written for each of them, but I doubt it's worth it. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | [S390] spp: fix compilation for CONFIG_32BITHeiko Carstens2010-05-262-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | Fix build breakage for CONFIG_32BIT caused by cd3b70f5 "[S390] virtualization aware cpu measurement" Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | | s390: convert cpu notifier to return encapsulate errno valueAkinobu Mita2010-05-271-3/+3
|/ / | | | | | | | | | | | | | | | | | | | | By the previous modification, the cpu notifier can return encapsulate errno value. This converts the cpu notifiers for s390. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | sysfs: add struct file* to bin_attr callbacksChris Wright2010-05-211-6/+8
| | | | | | | | | | | | | | | | | | This allows bin_attr->read,write,mmap callbacks to check file specific data (such as inode owner) as part of any privilege validation. Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds2010-05-1916-573/+580
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (24 commits) [S390] drivers/s390/char: Use kmemdup [S390] drivers/s390/char: Use kstrdup [S390] debug: enable exception-trace debug facility [S390] s390_hypfs: Add new attributes [S390] qdio: remove API wrappers [S390] qdio: set correct bit in dsci [S390] qdio: dont convert timestamps to microseconds [S390] qdio: remove memset hack [S390] qdio: prevent starvation on PCI devices [S390] qdio: count number of qdio interrupts [S390] user space fault: report fault before calling do_exit [S390] topology: expose core identifier [S390] dasd: remove uid from devmap [S390] dasd: add dynamic pav toleration [S390] vdso: add missing vdso_install target [S390] vdso: remove redundant check for CONFIG_64BIT [S390] avoid default_llseek in s390 drivers [S390] vmcp: disallow modular build [S390] add breaking event address for user space [S390] virtualization aware cpu measurement ...
| * | [S390] debug: enable exception-trace debug facilityHeiko Carstens2010-05-171-18/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The exception-trace facility on x86 and other architectures prints traces to dmesg whenever a user space application crashes. s390 has such a feature since ages however it is called userprocess_debug and is enabled differently. This patch makes sure that whenever one of the two procfs files /proc/sys/kernel/userprocess_debug /proc/sys/debug/exception-trace is modified the contents of the second one changes as well. That way we keep backwards compatibilty but also support the same interface like other architectures do. Besides that the output of the traces is improved since it will now also contain the corresponding filename of the vma (when available) where the process caused a fault or trap. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | [S390] user space fault: report fault before calling do_exitHeiko Carstens2010-05-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Report user space faults before calling do_exit, since do_exit does not return and therefore we will never see the fault message on the console. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 04:43:15 +0000