summaryrefslogtreecommitdiffstats
path: root/arch
Commit message (Collapse)AuthorAgeFilesLines
* powerpc/85xx: mpc8548cds - Add RapidIO node to dtschenhui zhao2012-03-163-0/+24
| | | | | | | | Enable RapidIO and add rapidio and rmu nodes to dts. Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: mpc8548cds - Add NOR flash node to dtschenhui zhao2012-03-161-1/+39
| | | | | | Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: mpc85xxcds - Fix PCI I/O space resource of PCI bridgechenhui zhao2012-03-161-2/+29
| | | | | | | | | | | | | | | | | | There is a PCI bridge(Tsi310) between the MPC8548 and a VIA southbridge chip. The bootloader sets the PCI bridge to open a window from 0x0000 to 0x1fff on the PCI I/O space. But the kernel can't set the I/O resource. In the routine pci_read_bridge_io(), if the base which is read from PCI_IO_BASE is equal to zero, the routine don't set the I/O resource of the child bus. To allow the legacy I/O space on the VIA southbridge to be accessed, use the fixup to fix the PCI I/O space of the PCI bridge. Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Add Quicc Engine support for p1025rdbZhicheng Fan2012-03-161-1/+76
| | | | | | Signed-off-by: Zhicheng Fan <b32736@freescale.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Abstract common define of signal multiplex control for qeZhicheng Fan2012-03-162-21/+20
| | | | | | | | The mpc85xx_rdb and mpc85xx_mds have commom define of signal multiplex for qe, so they need to go in common header, the patch abstract them to fsl_guts.h Signed-off-by: Zhicheng Fan <b32736@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: allow CONFIG_PHYS_64BIT to be selectableTimur Tabi2012-03-163-1/+2
| | | | | | | | | | | | | | | | | | Remove the "select PHYS_64BIT" from the Kconfig entry for the P1022DS, so that large physical address support is a selectable option for non-CoreNet reference boards. The option is enabled in mpc85xx_[smp_]defconfig so that the default is unchanged. However, now it can be deselected. The P1022DS had this option defined because the default device tree for this board uses 36-bit addresses. This had the side-effect of forcing this option on for all boards that use mpc85xx_[smp_]defconfig. Some users may want to disable this feature to create an optimized configuration for boards with <= 2GB of RAM. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: l2sram - Add compatible entry for mpc8548 L2 controllerchenhui zhao2012-03-161-0/+3
| | | | | | Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/dts: fix the compatible string of sec 4.0Liu Shuo2012-03-161-5/+5
| | | | | | | | | Fix the compatible string of sec 4.0 to match with CAAM driver according to Documentation/devicetree/bindings/crypto/fsl-sec4.txt Signed-off-by: Liu Shuo <shuo.liu@freescale.com> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Add missing config option for CACHE SRAM codeClaudiu Manoil2012-03-161-0/+9
| | | | | | | | | | | fsl_85xx_l2ctlr.o and fsl_85xx_cache_sram.o are built only if CONFIG_FSL_85XX_CACHE_SRAM is defined. The driver that qualifies and wants to make use of the CACHE SRAM's exported API (i.e. a freescale net driver) should (be able to) select this config option. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Fix compiler error with THIS_MODULE and relatedClaudiu Manoil2012-03-162-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CC arch/powerpc/sysdev/fsl_85xx_l2ctlr.o arch/powerpc/sysdev/fsl_85xx_l2ctlr.c:209:13: error: 'THIS_MODULE' undeclared here (not in a function) arch/powerpc/sysdev/fsl_85xx_l2ctlr.c:229:20: error: expected declaration specifiers or '...' before string constant cc1: warnings being treated as errors arch/powerpc/sysdev/fsl_85xx_l2ctlr.c:229:1: error: data definition has no type or storage class arch/powerpc/sysdev/fsl_85xx_l2ctlr.c:229:1: error: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' arch/powerpc/sysdev/fsl_85xx_l2ctlr.c:229:20: error: function declaration isn't a prototype arch/powerpc/sysdev/fsl_85xx_l2ctlr.c:230:16: error: expected declaration specifiers or '...' before string constant arch/powerpc/sysdev/fsl_85xx_l2ctlr.c:230:1: error: data definition has no type or storage class arch/powerpc/sysdev/fsl_85xx_l2ctlr.c:230:1: error: type defaults to 'int' in declaration of 'MODULE_LICENSE' arch/powerpc/sysdev/fsl_85xx_l2ctlr.c:230:16: error: function declaration isn't a prototype make[1]: *** [arch/powerpc/sysdev/fsl_85xx_l2ctlr.o] Error 1 ... CC arch/powerpc/sysdev/fsl_85xx_cache_sram.o cc1: warnings being treated as errors arch/powerpc/sysdev/fsl_85xx_cache_sram.c:69:1: error: data definition has no type or storage class arch/powerpc/sysdev/fsl_85xx_cache_sram.c:69:1: error: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' arch/powerpc/sysdev/fsl_85xx_cache_sram.c:69:1: error: parameter names (without types) in function declaration arch/powerpc/sysdev/fsl_85xx_cache_sram.c:80:1: error: data definition has no type or storage class arch/powerpc/sysdev/fsl_85xx_cache_sram.c:80:1: error: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' arch/powerpc/sysdev/fsl_85xx_cache_sram.c:80:1: error: parameter names (without types) in function declaration make[1]: *** [arch/powerpc/sysdev/fsl_85xx_cache_sram.o] Error 1 Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/83xx: mpc836x - fix failed phy detection for ucc ethernet on MDSPaul Gortmaker2012-03-161-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mpc836x_mds platform has been broken since the commit 6fe3264945ee63292cdfb27b6e95bc52c603bb09 "netdev/phy: Use mdiobus_read() so that proper locks are taken" which caused the fsl_pq_mdio TBI autoprobe to oops. The oops was "fixed" in commit 28d8ea2d568534026ccda3e8936f5ea1e04a86a1 "fsl_pq_mdio: Clean up tbi address configuration" by simply removing the the autoscan code, and making tbi nodes mandatory. Some of the newer reference platforms were updated to have tbi nodes in 220669495bf8b68130a8218607147c7b74c28d2b "powerpc: Add TBI PHY node to first MDIO bus" but the older mpc836x didn't get one and hence was just failing with -EBUSY as follows: fsl-pq_mdio: probe of e0102120.mdio failed with error -16 ... net eth0: Could not attach to PHY eth0: Cannot initialize PHY, aborting. Add a TBI node and use the 1st free address for it. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: p1022ds: enable monitor switching via pixis indirect modeTimur Tabi2012-03-161-22/+110
| | | | | | | | | | | | | | When the P1022's DIU video controller is active, the pixis must be accessed in "indirect" mode, which uses localbus chip select addresses. Switching between the DVI and LVDS monitor ports is handled by the pixis, so that switching needs to be done via indirect mode. This has the side-effect of no longer requiring U-Boot to enable the DIU. Now Linux can enable the DIU all by itself. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Board support for GE IMP3AMartyn Welch2012-03-165-0/+774
| | | | | | | | Initial board support for the GE IMP3A, a 3U compactPCI card with a p2020 processor. Signed-off-by: Martyn Welch <martyn.welch@ge.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: Move GE PIC driversMartyn Welch2012-03-1610-9/+11
| | | | | | | Move the GE PIC drivers to allow these to be used by non-86xx boards. Signed-off-by: Martyn Welch <martyn.welch@ge.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* gpio: Move GE GPIO driver to reside within GPIO subsystemMartyn Welch2012-03-165-173/+5
| | | | | | | | | | The GE GPIO driver provides basic support (set direction, read/write state) for the GPIO provided on some GE single board computers. This patch moves the driver from the 86xx specific platform directrory to the GPIO subsystem so that it can be used on non-86xx boards. Signed-off-by: Martyn Welch <martyn.welch@ge.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: Add GE FPGA config optionMartyn Welch2012-03-162-3/+11
| | | | | | | | | | | This patch adds the GE_FPGA configuration option. This is being carried out as ground work to allow the PIC and GPIO drivers to be move from the powerpc 86xx platform directory to more general locations to allow them to be used on non-86xx boards and to reduce churn when further boards using these drivers are added. Signed-off-by: Martyn Welch <martyn.welch@ge.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Add dts for p1020rdb-pc boardZhicheng Fan2012-03-165-0/+633
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | P1020RDB-PC Overview ------------------ 1Gbyte DDR3 SDRAM 32 Mbyte NAND flash 10 16Mbyte NOR flash 16 Mbyte SPI flash SD connector to interface with the SD memory card Real-time clock on I2C bus PCIe: - x1 PCIe slot - x1 mini-PCIe slot 10/100/1000 BaseT Ethernet ports: - eTSEC1, RGMII: one 10/100/1000 port using VitesseTM VSC7385 L2 switch - eTSEC2, SGMII: one 10/100/1000 port using VitesseTM VSC8221 - eTSEC3, RGMII: one 10/100/1000 port using AtherosTM AR8021 USB 2.0 port: - Two USB2.0 Type A receptacles - One USB2.0 signal to Mini PCIe slot Dual RJ45 UART ports: - DUART interface: supports two UARTs up to 115200 bps for console display Signed-off-by: Zhicheng Fan <b32736@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Add p1020rdb-pc platform supportZhicheng Fan2012-03-161-1/+23
| | | | | Signed-off-by: Zhicheng Fan <b32736@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: add P1020UTM-PC platform supportJerry Huang2012-03-161-0/+22
| | | | | | | | | | | | | | | | | | The p1020utm-pc has the similar feature as the p1020rdb. Therefore, p1020utm-pc use the same platform file as the p1/p2 rdb board. Overview of P1020UTM-PC platform: - DDR3 1GB - NOR flash 32MB - I2C EEPROM 256Kb - eTSEC1 (RGMII PHY Atheros AR8021) - eTSEC2 (SGMII PHY Vitesse VSC8221) - eTSEC3 (RGMII PHY Atheros AR8021) - SDHC - 2 USB ports - PCIe (Lane1 to dual SATA controller) Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: add P1020MBG-PC platform supportJerry Huang2012-03-161-0/+22
| | | | | | | | | | | | | | | | | | | The p1020mbg-pc has the similar feature as the p1020rdb. Therefore, p1020mbg-pc use the same platform file as the p1/p2 rdb board. Overview of P1020MBG-PC platform: - DDR3 2GB - NOR flash 64MB - I2C EEPROM 256Kb - eTSEC1 (RGMII PHY) connected to VSC7385 L2 switch - eTSEC2 (SGMII PHY) - eTSEC3 (RGMII PHY) - SDHC - 2 USB ports - 4 TDM ports - PCIe (Lane1 to dual SATA controller) Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Clean up partition nodes in dts for MPC8572DSJia Hongtao2012-03-161-18/+32
| | | | | | | Signed-off-by: Jin Qing <b24347@freescale.com> Signed-off-by: Jia Hongtao <B38951@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: p1022ds: disable the NOR flash node if video is enabledTimur Tabi2012-03-162-1/+76
| | | | | | | | | | | | | | | | The Freescale P1022 has a unique pin muxing "feature" where the DIU video controller's video signals are muxed with 24 of the local bus address signals. When the DIU is enabled, the bulk of the local bus is disabled, preventing access to memory-mapped devices like NOR flash and the pixis FPGA. Therefore, if the DIU is going to be enabled, then memory-mapped devices on the localbus, like NOR flash, need to be disabled. This also means that the localbus is not a 'simple-bus' any more, so remove that string from the compatible node. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: create 32-bit DTS for the P1022DSTimur Tabi2012-03-164-274/+440
| | | | | | | | | Create a 32-bit address space version of p1022ds.dts. To avoid confusion, p1022ds.dts is renamed to p1022ds_36b.dts. We also create p1022ds.dtsi to store some common nodes. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Add magic-packet properties for etsecXie Xiaobo2012-03-164-4/+8
| | | | | | | | The properties indicates that the hardware supports waking up via magic packet. Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Add some DTS nodes and attributes for mpc8536dsXie Xiaobo2012-03-163-3/+104
| | | | | | | Add partitions for NOR and NAND Flash. Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl_msi: return proper error value when ioremap failed.Liu Shuo2012-03-161-0/+1
| | | | | | Signed-off-by: Liu Shuo <soniccat.liu@gmail.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: fix typo in p1010rdb.dtsiGustavo Zacarias2012-03-161-1/+1
| | | | | | | | | | Fix typo introduced by "powerpc: Add TBI PHY node to first MDIO bus" from Andy Fleming. It's device_type rather than device-type, which causes the mdio probe to fail thus making all gianfar ethernet interfaces unusable. Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: p2020rdb & p1010rdb - lower spi flash freq to 40MhzSebastian Andrzej Siewior2012-03-162-2/+2
| | | | | | | | | | | | | This is here most likely since the FSL bsp. Back in the FSL bsp it was set to 50Mhz and working. However the driver divided the SoC freq. only by 2. According to the TRM the platform clock (which the manual refers in its formula) is the system clock divided by two. So in the end it has to divide by 4 and this is what the fsl-spi driver in tree is doing. Since then the flash is not wokring I guess. After chaning the freq from 50Mhz to 40Mhz like others do then I can access the flash. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: p2020rdb - move the NAND address.Sebastian Andrzej Siewior2012-03-161-1/+1
| | | | | | | | | | It is not at 0xffa00000. According to current u-boot source the NAND controller is always at 0xff800000 and it is either at CS0 or CS1 depending on NAND or NAND+NOR mode. In 36bit mode it is shifted to 0xfff800000 but it has always an eight there and never an A. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/srio: Fix the compile errors when building with 64bitLiu Gang2012-03-161-20/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For the file "arch/powerpc/sysdev/fsl_rmu.c", there will be some compile errors while using the corenet64_smp_defconfig: .../fsl_rmu.c:315: error: cast from pointer to integer of different size .../fsl_rmu.c:320: error: cast to pointer from integer of different size .../fsl_rmu.c:320: error: cast to pointer from integer of different size .../fsl_rmu.c:320: error: cast to pointer from integer of different size .../fsl_rmu.c:330: error: cast to pointer from integer of different size .../fsl_rmu.c:332: error: cast to pointer from integer of different size .../fsl_rmu.c:339: error: cast to pointer from integer of different size .../fsl_rmu.c:340: error: cast to pointer from integer of different size .../fsl_rmu.c:341: error: cast to pointer from integer of different size .../fsl_rmu.c:348: error: cast to pointer from integer of different size .../fsl_rmu.c:348: error: cast to pointer from integer of different size .../fsl_rmu.c:348: error: cast to pointer from integer of different size .../fsl_rmu.c:659: error: cast from pointer to integer of different size .../fsl_rmu.c:659: error: format '%8.8x' expects type 'unsigned int', but argument 5 has type 'size_t' .../fsl_rmu.c:985: error: cast from pointer to integer of different size .../fsl_rmu.c:997: error: cast to pointer from integer of different size Rewrote the corresponding code with the support of 64bit building. Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/srio: Fix the relocation errors when building with 64bitLiu Gang2012-03-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For the file "arch/powerpc/sysdev/fsl_rio.c", there will be some relocation errors while using the corenet64_smp_defconfig: WARNING: modpost: Found 6 section mismatch(es). To see full details build your kernel with: 'make CONFIG_DEBUG_SECTION_MISMATCH=y' GEN .version CHK include/generated/compile.h UPD include/generated/compile.h CC init/version.o LD init/built-in.o LD .tmp_vmlinux1 arch/powerpc/sysdev/built-in.o:(__ex_table+0x0): relocation truncated to fit: R_PPC64_ADDR16 against `.text'+3208 arch/powerpc/sysdev/built-in.o:(__ex_table+0x2): relocation truncated to fit: R_PPC64_ADDR16 against `.fixup' arch/powerpc/sysdev/built-in.o:(__ex_table+0x4): relocation truncated to fit: R_PPC64_ADDR16 against `.text'+3230 arch/powerpc/sysdev/built-in.o:(__ex_table+0x6): relocation truncated to fit: R_PPC64_ADDR16 against `.fixup'+c arch/powerpc/sysdev/built-in.o:(__ex_table+0x8): relocation truncated to fit: R_PPC64_ADDR16 against `.text'+3250 arch/powerpc/sysdev/built-in.o:(__ex_table+0xa): relocation truncated to fit: R_PPC64_ADDR16 against `.fixup'+18 Rewrote the corresponding code with the support of 64bit building. Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Add dts for p1025rdb boardZhicheng Fan2012-03-163-0/+509
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | P1025RDB Overview ------------------ 1Gbyte DDR3 SDRAM 32 Mbyte NAND flash 16Mbyte NOR flash 16 Mbyte SPI flash SD connector to interface with the SD memory card Real-time clock on I2C bus PCIe: - x1 PCIe slot - x1 mini-PCIe slot 10/100/1000 BaseT Ethernet ports: - eTSEC1, RGMII: one 10/100/1000 port using AtherosTM AR8021 - eTSEC2, SGMII: one 10/100/1000 port using VitesseTM VSC8221 - eTSEC3, RGMII: one 10/100/1000 port using AtherosTM AR8021 USB 2.0 port: - Two USB2.0 Type A receptacles - One USB2.0 signal to Mini PCIe slot Dual RJ45 UART ports: - DUART interface: supports two UARTs up to 115200 bps for console display Signed-off-by: Zhicheng Fan <b32736@freescale.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Add p1025rdb platform supportZhicheng Fan2012-03-161-0/+22
| | | | | | Signed-off-by: Zhicheng Fan <b32736@freescale.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Add usb controller version infoRamneek Mehresh2012-03-1611-2/+38
| | | | | | | | | Add usb controller version info for the following: MPC8536, P1010, P1020, P1021, P1022, P1023, P2020, P2041, P3041, P3060, P5020 Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Add p2020rdb-pc dts supportTang Yuantian2012-03-163-0/+433
| | | | | | | Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Tang Yuantian <b29983@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Adds Support for P2020RDB-PC boardTang Yuantian2012-03-161-0/+24
| | | | | | | | | | | | | | | P2020RDB-PC Board shares the same design(PCB) as P102x RDB style platforms. The difference between this platform and the already existing P2020RDB is mainly with respect to DDR. The P2020RDB-PC has a DDR3 memory. The P2020RDB-PC also has a CPLD device connected to local bus. The main differences from the P102x RDB-PC is 64-bit DDR and SYSCLK of 100Mhz. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Tang Yuantian <b29983@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Added P1021RDB-PC Platform supportXu Jiucheng2012-03-161-0/+24
| | | | | Signed-off-by: Xu Jiucheng <B37781@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Added dts for P1021RDB-PC boardXu Jiucheng2012-03-164-0/+432
| | | | | | | | | | | | | | | | | | | | | | | | | | | P1021RDB-PC Overview ----------------- 1Gbyte DDR3 (on board DDR) 16Mbyte NOR flash 32Mbyte eSLC NAND Flash 256 Kbit M24256 I2C EEPROM 128 Mbit SPI Flash memory Real-time clock on I2C bus SD/MMC connector to interface with the SD memory card PCIex - x1 PCIe slot or x1 PCIe to dual SATA controller - x1 mini-PCIe slot USB 2.0 - ULPI PHY interface: SMSC USB3300 USB PHY and Genesys Logic’s GL850A - Two USB2.0 Type A receptacles - One USB2.0 signal to Mini PCIe slot eTSEC1: Connected to RGMII PHY VSC7385 eTSEC2: Connected to SGMII PHY VSC8221 eTSEC3: Connected to SGMII PHY AR8021 DUART interface: supports two UARTs up to 115200 bps for console display Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Xu Jiucheng <B37781@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: Add initial e6500 cpu supportKumar Gala2012-03-152-4/+26
| | | | | | Add basic support for e6500 core in its single threaded mode. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl-booke: Fixup calc_cam_sz to support MMU v2Kumar Gala2012-03-152-6/+14
| | | | | | | | | The registers that describe size supported by TLB are different on MMU v2 as well as we support power of two page sizes. For now we continue to assume that FSL variable size array supports all page sizes up to the maximum one reported in TLB1PS. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: fix Kconfig warning about missing 8250 dependencyPaul Gortmaker2012-03-151-0/+1
| | | | | | | | | | | | | | The SERIAL_8250_EXTENDED option just enables access to other less regularly used options, like SERIAL_8250_SHARE_IRQ. Select it to get rid of this warning when selecting the child option living underneath it. warning: (FSL_SOC_BOOKE && SERIAL_8250_RM9K) selects SERIAL_8250_SHARE_IRQ which has unmet direct dependencies (HAS_IOMEM && SERIAL_8250_EXTENDED) Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Merge branch 'eeh' into nextBenjamin Herrenschmidt2012-03-1317-869/+1462
|\
| * powerpc/eeh: pseries platform config space access in EEHGavin Shan2012-03-093-17/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the original EEH implementation, the access to config space of the corresponding PCI device is done by RTAS sensitive function. That depends on pci_dn heavily. That would limit EEH extension to other platforms like powernv because other platforms might have different ways to access PCI config space. The patch splits those functions used to access PCI config space and implement them in platform related EEH component. It would be helpful to support EEH on multiple platforms simutaneously in future. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * powerpc/eeh: Introduce struct eeh_stats for EEHGavin Shan2012-03-091-27/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the original EEH implementation, the EEH global statistics are maintained by individual global variables. That makes the code a little hard to maintain. The patch introduces extra struct eeh_stats for the EEH global statistics so that it can be maintained in collective fashion. It's the rework on the corresponding v5 patch. According to the comments from David Laight, the EEH global statistics have been changed for a litte bit so that they have fixed-type of "u64". Also, the format used to print them has been changed to "%llu" based on David's suggestion. Also, the output format of EEH global statistics should be kept as intacted according to Michael's suggestion that there might be tools parsing them. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * powerpc/eeh: Replace pci_dn with eeh_dev for EEH on pSeriesGavin Shan2012-03-091-48/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | The pci_dn has been replaced with eeh_dev. In order to comply with the rule, the EEH platform implementation on pSeries should also be adjusted for a little bit so that it will depend on eeh_dev instead of pci_dn. The patch replaces pci_dn with eeh_dev. The corresponding information will be retrieved from eeh_dev instead of pci_dn. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * powerpc/eeh: Replace pci_dn with eeh_dev for EEH aux componentsGavin Shan2012-03-094-63/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The original EEH implementation is heavily depending on struct pci_dn. We have to put EEH related information to pci_dn. Actually, we could split struct pci_dn so that the EEH sensitive information to form an individual struct, then EEH looks more independent. The patch replaces pci_dn with eeh_dev for EEH aux components like event and driver. Also, the eeh_event struct has been adjusted for a little bit since eeh_dev has linked the associated FDT (Flat Device Tree) node and PCI device. It's not necessary for eeh_event struct to trace FDT node and PCI device. We can just simply to trace eeh_dev in eeh_event. The patch also renames function pcid_name() to eeh_pcid_name(), which should be missed in the previous patch where the EEH aux components have been cleaned up. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * powerpc/eeh: Replace pci_dn with eeh_dev for EEH coreGavin Shan2012-03-092-133/+144
| | | | | | | | | | | | | | | | | | | | | | | | The original EEH implementation is heavily depending on struct pci_dn. We have to put EEH related information to pci_dn. Actually, we could split struct pci_dn so that the EEH sensitive information to form an individual struct, then EEH looks more independent. The patch replaces pci_dn with eeh_dev for EEH core. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * powerpc/eeh: Replace pci_dn with eeh_dev for EEH address cacheGavin Shan2012-03-091-7/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With original EEH implementation, struct pci_dn is used while building PCI I/O address cache, which helps on searching the corresponding PCI device according to the given physical I/O address. Besides, pci_dn is associated with the corresponding PCI device while building its I/O cache. The patch replaces struct pci_dn with struct eeh_dev so that EEH address cache won't depend on struct pci_dn. That will help EEH to become an independent module in future. Besides, the binding of eeh_dev and PCI device is done while building PCI device I/O cache. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * powerpc/eeh: Replace pci_dn with eeh_dev for EEH sysfsGavin Shan2012-03-091-13/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With original EEH implementation, all EEH related statistics have been put into struct pci_dn. We've introduced struct eeh_dev to replace struct pci_dn in EEH core components, including EEH sysfs component. The patch shows EEH statistics from struct eeh_dev instead of struct pci_dn in EEH sysfs component. Besides, it also fixed the EEH device retrieval from PCI device, which was introduced by the previous patch in the series of patch. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * powerpc/eeh: Introduce EEH deviceGavin Shan2012-03-098-10/+173
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Original EEH implementation depends on struct pci_dn heavily. However, EEH shouldn't depend on that actually because EEH needn't share much information with other PCI components. That's to say, EEH should have worked independently. The patch introduces struct eeh_dev so that EEH core components needn't be working based on struct pci_dn in future. Also, struct pci_dn, struct eeh_dev instances are created in dynamic fasion and the binding with EEH device, OF node, PCI device is implemented as well. The EEH devices are created after PHBs are detected and initialized, but PCI emunation hasn't started yet. Apart from that, PHB might be created dynamically through DLPAR component and the EEH devices should be creatd as well. Another case might be OF node is created dynamically by DR (Dynamic Reconfiguration), which has been defined by PAPR. For those OF nodes created by DR, EEH devices should be also created accordingly. The binding between EEH device and OF node is done while the EEH device is initially created. The binding between EEH device and PCI device should be done after PCI emunation is done. Besides, PCI hotplug also needs the binding so that the EEH devices could be traced from the newly coming PCI buses or PCI devices. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 09:16:37 +0000