summaryrefslogtreecommitdiffstats
path: root/arch
Commit message (Collapse)AuthorAgeFilesLines
* locking: Make inlining decision Kconfig basedThomas Gleixner2009-11-132-29/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
* Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds2009-11-129-56/+126
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap3: Decrease cpufreq transition latency omap3: update Pandora defconfig omap3: 3430sdp: Enable Linux Regulator framework omap3: beagle: Fix USB host port power control omap3: pandora: Fix keypad keymap omap1: Amstrad Delta defconfig fixes omap: Fix omapfb/lcdc on OMAP1510 broken when PM set omap: Use resource_size omap: Fix race condition in omap dma driver
| * omap3: Decrease cpufreq transition latencyMike Turquette2009-11-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Adjust OMAP3 frequency transition latency from 10,000,000uS to a more reasonable 300,000uS. This causes ondemand and conservative governors to sample CPU load more often resulting in more responsive behavior. Tested on Android 2.6.29; using this value and conservative governor, CORE power consumption on Zoom2 was comparable to the old and unresponsive 10,000,000uS value while UI responsiveness was greatly improved. Signed-off-by: Mike Turquette <mturquette@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap3: update Pandora defconfigGrazvydas Ignotas2009-11-111-5/+44
| | | | | | | | | | | | | | | | | | This patch updates defconfig to enable options needed to properly boot OMAP3 pandora board. It also enables MMC, OTG, GPIO LEDs, TWL4030 GPIO and sound drivers. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap3: 3430sdp: Enable Linux Regulator frameworkSergio Aguirre2009-11-111-1/+8
| | | | | | | | | | | | | | | | Some drivers have dependencies on this, and therefore should be enabled. Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap3: beagle: Fix USB host port power controlJarkko Nikula2009-11-111-1/+1
| | | | | | | | | | | | | | | | | | The host port power is enabled by driving the nEN_USB_PWR low as stated in the comment. This fix is originally from Steve Sakoman <steve@sakoman.com>. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Steve Sakoman <steve@sakoman.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap3: pandora: Fix keypad keymapGrazvydas Ignotas2009-11-111-39/+39
| | | | | | | | | | | | | | | | | | | | | | The original TWL4030 keypad driver from linux-omap used KEY() macro defined as (col, row), but while it was merged upstream it was changed to use matrix keypad infrastructure, which uses (row, col) format. Update the keymap in board file to match layout of mainline driver. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap1: Amstrad Delta defconfig fixesJanusz Krzysztofik2009-11-111-7/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | The patch provides the following fixes: - keep kernel small enough to boot with standard tools, - ensure compatibility with both new and legacy distros, - turn on support for recently added or fixed hardware features. Created and tested against linux-2.6.32-rc5. Signed-off-by: Janusz Krzysztofik <jkrzysz@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: Fix omapfb/lcdc on OMAP1510 broken when PM setJanusz Krzysztofik2009-11-111-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With CONFIG_PM=y, the omapfb/lcdc device on Amstrad Delta, after initially starting correctly, breaks with the following error messages: omapfb omapfb: resetting (status 0xffffff96,reset count 1) ... omapfb omapfb: resetting (status 0xffffff96,reset count 100) omapfb omapfb: too many reset attempts, giving up. Looking closer at this I have found that it had been broken almost 2 years ago with commit 2418996e3b100114edb2ae110d5d4acb928909d2, PM fixes for OMAP1. The definite reason for broken omapfb/lcdc behavoiur in PM mode appeared to be ARM_IDLECT1:IDLIF_ARM (bit 6) put into idle regardless of LCD DMA possibly running. The bit were set based on return value of the omap_dma_running() function that did not check for dedicated LCD DMA channel status. The patch below fixes this. Note that the hardcoded register value will be fixed during the next merge cycle to use OMAP_LCDC_ defines. Currently the OMAP_LCDC_ defines are local to drivers/video/omap/lcdc.c, so let's not start moving those right now. Created against linux-2.6.32-rc6 Tested on Amstrad Delta Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: Use resource_sizeTobias Klauser2009-11-102-2/+2
| | | | | | | | | | | | | | | | | | Use the resource_size function instead of manually calculating the resource size. This reduces the chance of introducing off-by-one errors and actually fixes one in mailbox.c. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * omap: Fix race condition in omap dma driverTao Hu2009-11-101-0/+6
| | | | | | | | | | | | | | | | | | | | The bug could cause irq enable bit of one DMA channel is cleared/set unexpectedly when 2 (or more) drivers are calling omap_request_dma()/omap_free_dma() simultaneously Signed-off-by: Fei Yang <AFY095@motorola.com> Signed-off-by: Tao Hu <taohu@motorola.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | alpha: move THREAD_SIZE definition outside #ifndef ASSEMBLYAndrew Morton2009-11-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | arch/alpha/kernel/vmlinux.lds.S uses it: arch/alpha/kernel/vmlinux.lds:241: undefined symbol `THREAD_SIZE' referenced in expression Seems to have been caused by commit 9d93f00580243cc059510d9d6ac4d2f5e97e5b83 Author: Geoffrey Thomas <geofft@ksplice.com> AuthorDate: Thu Sep 24 10:36:26 2009 -0400 Commit: Linus Torvalds <torvalds@linux-foundation.org> CommitDate: Thu Sep 24 17:16:22 2009 -0700 alpha: Clean up linker script using new linker script macros. Note that .data.page_aligned and .data.cacheline_aligned are now after _data; it was probably a bug that they were before it. Also, some explicit ALIGN(8)'s between various initcall sections were removed; this should be harmless as the implicit alignment of initcall_t was already 8. Cc: Geoffrey Thomas <geofft@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | alpha: fix F_SETOWN_EX and F_GETLK64 conflictPeter Zijlstra2009-11-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a bug in commit ba0a6c9f6fceed11c6a99e8326f0477fe383e6b5 Author: Peter Zijlstra <a.p.zijlstra@chello.nl> AuthorDate: Wed Sep 23 15:57:03 2009 -0700 Commit: Linus Torvalds <torvalds@linux-foundation.org> CommitDate: Thu Sep 24 07:21:01 2009 -0700 fcntl: add F_[SG]ETOWN_EX In asm-generic/fcntl.h, F_SETOWN_EX and F_GETLK64 both have value 12, and F_GETOWN_EX and F_SETLK64 both have value 13. Reported-by: "Joseph S. Myers" <joseph@codesourcery.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Andreas Schwab <schwab@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge branch 'for-linus' of ↵Linus Torvalds2009-11-112-7/+9
|\ \ | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: x86/PCI: Adjust GFP mask handling for coherent allocations PCI ASPM: fix oops on root port removal
| * | x86/PCI: Adjust GFP mask handling for coherent allocationsJan Beulich2009-11-082-7/+9
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rather than forcing GFP flags and DMA mask to be inconsistent, GFP flags should be determined even for the fallback device through dma_alloc_coherent_mask()/dma_alloc_coherent_gfp_flags(). This restores 64-bit behavior as it was prior to commits 8965eb19386fdf5ccd0ef8b02593eb8560aa3416 and 4a367f3a9dbf2e7ffcee4702203479809236ee6e (not sure why there are two of them), where GFP_DMA was forced on for 32-bit, but not for 64-bit, with the slight adjustment that afaict even 32-bit doesn't need this without CONFIG_ISA. Signed-off-by: Jan Beulich <jbeulich@novell.com> Acked-by: Takashi Iwai <tiwai@suse.de> LKML-Reference: <4AF18187020000780001D8AA@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | Merge branch 'merge' of ↵Linus Torvalds2009-11-1157-1380/+2603
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: pasemi_defconfig update powerpc: 2.6.32 update of defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxx powerpc/8xxx: enable IPsec ESP by default on mpc83xx/mpc85xx powerpc/83xx: Fix u-boot partion size for MPC8377E-WLAN boards powerpc/85xx: Fix USB GPIOs for MPC8569E-MDS boards powerpc/82xx: kmalloc failure ignored in ep8248e_mdio_probe() powerpc/85xx: sbc8548 - fixup of PCI-e related DTS fields
| * | powerpc: pasemi_defconfig updateOlof Johansson2009-11-111-167/+461
| | | | | | | | | | | | | | | | | | | | | | | | | | | pasemi_defconfig hasn't been updated for a year. Mostly a refresh of defaults, but this also disables 64K pages. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | Merge commit 'kumar/merge' into mergeBenjamin Herrenschmidt2009-11-1156-1213/+2142
| |\ \
| | * | powerpc: 2.6.32 update of defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxxKumar Gala2009-11-0552-1177/+2093
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Updated mpc85xx_{smp_}defconfig to enable: * XES_MPC85xx board * PCI MSI * RapidIO Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | powerpc/8xxx: enable IPsec ESP by default on mpc83xx/mpc85xxKim Phillips2009-11-053-23/+24
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | powerpc/83xx: Fix u-boot partion size for MPC8377E-WLAN boardsAnton Vorontsov2009-11-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | u-boot partition size should be 0x80000 (512 KB), not 0x8000 (32 KB). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | powerpc/85xx: Fix USB GPIOs for MPC8569E-MDS boardsAnton Vorontsov2009-11-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes USB GPIOs numbers for MPC8569E-MDS boards, plus according to the latest HW Getting Started Guide (rev 3.3, pilot boards), USB "POWER" GPIO polarity has changed, it is no longer inverted. This patch makes USB Host somewhat work on pilot boards, though there are still some problems with determining devices speed and long bulk transfers. Reported-by: Liu Yu <Yu.Liu@freescale.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | powerpc/82xx: kmalloc failure ignored in ep8248e_mdio_probe()Roel Kluin2009-11-051-1/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prevent NULL dereference if kmalloc() fails. Also clean up if of_mdiobus_register() returns an error. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | powerpc/85xx: sbc8548 - fixup of PCI-e related DTS fieldsPaul Gortmaker2009-11-051-9/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PCI-e addressing was originally patterned of the MPC8548CDS which has PCI1, PCI2, and PCI-e. Since this board only has PCI1 and PCI-e, it makes more sense to be similar to the MPC8568MDS board. This does that by cutting the PCI/PCI-e I/O sizes from 16MB to 8MB and pulling the PCI-e I/O range back to 0xe280_0000 (the hole where PCI2 I/O would have been). This also fixes a typo where an extra zero made an 8MB range a 128MB range, removes the hole left by PCI2 from the aliases, and sets the clocks to match the oscillators that are actually on the board. With accompanying u-boot updates, PCI-e has been validated with both a sky2 card (1148:9e00) and an e1000 card (8086:108b). Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | | Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2009-11-1131-236/+568
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: ARM: Use a definition for the userspace cmpxchg emulation syscall [ARM] Fix test for unimplemented ARM syscalls ARM: 5784/1: fix early boot machine ID mismatch error display [ARM] orion5x: update defconfig [ARM] Kirkwood: update defconfig [ARM] Kirkwood: clarify PCIe MEM bus/physical address distinction [ARM] kirkwood: fix PCI I/O port assignment [ARM] kirkwood: fix section mismatch [ARM] OpenRD base: Initialize PCI express and i2c [ARM] properly report mv78100 stepping A1 ARM: 5780/1: KS8695: Fix macro definition bug in regs-switch.c ARM: 5779/1: ep93xx/micro9.c: fix implicit declaration of function __raw_readl and IOMEM RealView: Add sparsemem support for the RealView PBX platform RealView: Remove duplicated #define REALVIEW_SYS_FLAGS* statements RealView: Add default memory configuration Check whether the SCU was already initialised ARMv7: Check whether the SMP/nAMP mode was already enabled [ARM] pxa: fix resume failure by saving/restoring IPRx registers [ARM] pxa/palm: fix incorrect initialization of Palm Tungsten C keyboard [ARM] pxa/zaurus: fix NAND flash OOB layout for Borzoi
| * \ \ \ Merge branch 'for-rmk' of git://linux-arm.org/linux-2.6Russell King2009-11-1012-9/+146
| |\ \ \ \
| | * | | | RealView: Add sparsemem support for the RealView PBX platformCatalin Marinas2009-11-054-3/+94
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The RealView PBX board has two 512MB blocks of memory - one at 0x70000000 (with 256MB mirror at 0) and another at 0x20000000. Only the block at 0x70000000 (or the mirror at 0) may be used for DMA (e.g. framebuffer). This patch adds the sparsemem definitions to allow the use of all the memory split as follows: 256MB @ 0x00000000 (ZONE_DMA) 512MB @ 0x20000000 (ZONE_NORMAL) 256MB @ 0x80000000 (ZONE_NORMAL) Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| | * | | | RealView: Remove duplicated #define REALVIEW_SYS_FLAGS* statementsColin Tuckley2009-11-051-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The platsmp.c file defines the REALVIEW_SYS_FLAGS* macros which are already present in platform.h. Just use the latter. Signed-off-by: Colin Tuckley <colin.tuckley@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| | * | | | RealView: Add default memory configurationCatalin Marinas2009-11-057-0/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a realview_fixup() function called during booting to set up the memory banks. This way there is no need to pass a "mem=" argument on the kernel command line. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| | * | | | Check whether the SCU was already initialisedCatalin Marinas2009-11-051-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If Linux is running in non-secure mode, this register may have been already initialised and writing to the control register not allowed. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| | * | | | ARMv7: Check whether the SMP/nAMP mode was already enabledTony Thompson2009-11-041-3/+4
| | | |_|/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If running in non-secure mode, enabling this register will fault. Signed-off-by: Tony Thompson <Anthony.Thompson@arm.com> Acked-by: Srinidhi Kasagar <srinidhikasagar@gmail.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * | | | ARM: Use a definition for the userspace cmpxchg emulation syscallRussell King2009-11-103-4/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use a definition for the cmpxchg SWI instead of hard-coding the number. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Nicolas Pitre <nico@fluxnic.net>
| * | | | [ARM] Fix test for unimplemented ARM syscallsRussell King2009-11-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The existing test always failed since 'no' was always greater than 0x7ff. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | Merge branch 'for-rmk' of git://git.marvell.com/orionRussell King2009-11-0810-199/+367
| |\ \ \ \
| | * | | | [ARM] orion5x: update defconfigNicolas Pitre2009-11-071-102/+176
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Nicolas Pitre <nico@marvell.com>
| | * | | | [ARM] Kirkwood: update defconfigNicolas Pitre2009-11-071-91/+169
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Nicolas Pitre <nico@marvell.com>
| | * | | | [ARM] Kirkwood: clarify PCIe MEM bus/physical address distinctionLennert Buytenhek2009-11-073-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
| | * | | | [ARM] kirkwood: fix PCI I/O port assignmentLennert Buytenhek2009-11-072-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of allocating PCI devices I/O port bus addresses from the 000xxxxx I/O port range as intended, due to a bus versus physical address mixup, the Kirkwood PCIe handling code inadvertently allocated I/O port bus addresses from the f20xxxxx address range (which is the physical address range of the PCIe I/O mapping window), but then direct all I/O port accesses to bus addresses 000xxxxx, which would then not be decoded at all. Fix this by setting the base address of the PCIe I/O space struct resource to KIRKWOOD_PCIE_IO_BUS_BASE instead of the incorrect KIRKWOOD_PCIE_IO_PHYS_BASE, and fix up __io() to expect addresses offsetted by the former instead of the latter. (The suggested fix of directing I/O port accesses from the host to bus addresses f20xxxxx instead has the problem that assigning full 32bit I/O port bus addresses (f20xxxxx) doesn't work on all PCI devices, as not all PCI devices implement full 32 bit BAR registers for I/O ports. We should really try to allocate I/O port bus addresses that fit in 16 bits.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
| | * | | | [ARM] kirkwood: fix section mismatchLi Jie2009-11-052-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | kirkwood_timer_init() and kirkwood_pcie_setup() lack of __init which causes following warnings: WARNING: vmlinux.o(.text+0x9568): Section mismatch in reference from the function kirkwood_timer_init() to the function .init.text:kirkwood_find_tclk() The function kirkwood_timer_init() references the function __init kirkwood_find_tclk(). This is often because kirkwood_timer_init lacks a __init annotation or the annotation of kirkwood_find_tclk is wrong. WARNING: vmlinux.o(.text+0x979c): Section mismatch in reference from the function kirkwood_pcie_setup() to the function .init.text:orion_pcie_setup() The function kirkwood_pcie_setup() references the function __init orion_pcie_setup(). This is often because kirkwood_pcie_setup lacks a __init annotation or the annotation of orion_pcie_setup is wrong. Signed-off-by: lijie <eltshanli@gmail.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
| | * | | | [ARM] OpenRD base: Initialize PCI express and i2cSimon Kagstrom2009-11-051-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Acked-by: Dieter Kiermaier <dk-arm-linux@gmx.de> Signed-off-by: Nicolas Pitre <nico@marvell.com>
| | * | | | [ARM] properly report mv78100 stepping A1Lennert Buytenhek2009-11-052-0/+3
| | |/ / / | | | | | | | | | | | | | | | | | | | | Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
| * | | | ARM: 5784/1: fix early boot machine ID mismatch error displayNicolas Pitre2009-11-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | That code was refactored a long time ago, but one particular label didn't get adjusted properly which broke the listing of supported machines. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | ARM: 5780/1: KS8695: Fix macro definition bug in regs-switch.czeal2009-11-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NOTE: 1. Macro style is so strange. 2. The value 0xc0 is not match with KS8695 manual. It should be 0x0c. Signed-off-by: zeal <zealcook@gmail.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | ARM: 5779/1: ep93xx/micro9.c: fix implicit declaration of function ↵Jean-Christop PLAGNIOL-VILLARD2009-11-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | __raw_readl and IOMEM Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | Merge branch 'fix' of ↵Russell King2009-11-053-21/+37
| |\ \ \ \ | | |/ / / | |/| | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
| | * | | [ARM] pxa: fix resume failure by saving/restoring IPRx registersHaojian Zhuang2009-11-031-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since interrupt handler is changed to use interrupt priority, we also need to save and restore these interrupt controller registers in suspend/resume routine. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Tested-by: Daniel Mack <daniel@caiaq.de> Tested-by: Pavel Machek <pavel@ucw.cz> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
| | * | | [ARM] pxa/palm: fix incorrect initialization of Palm Tungsten C keyboardOndrej Zajicek2009-11-031-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Palm Tungsten C keyboard structure has swapped rows/cols gpio structures and does not work. This patch fixes it. Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org> Cc: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
| | * | | [ARM] pxa/zaurus: fix NAND flash OOB layout for BorzoiStanislav Brabec2009-11-031-16/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Borzoi, Terrier and Akita use the same NAND Flash OOB layout, which seems to be different from Spitz for some reason. Here is a fix. When the code was ported to the platform data, the map was applied just for Akita. After this patch, Flash works again on Borzoi. Terrier still has a problem with partition table different from Borzoi (unfixable without reading of the system configuration in flash) and JFFS2 partitions can be mounted (with some "Empty flash at ... ends at ..." in the syslog). Signed-off-by: Stanislav Brabec <utx@penguin.cz> Acked-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* | | | | Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds2009-11-113-13/+24
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, amd-ucode: Check UCODE_MAGIC before loading the container file x86: Fix error return sequence in __ioremap_caller() x86: Add Phoenix/MSC BIOSes to lowmem corruption list
| * | | | | x86, amd-ucode: Check UCODE_MAGIC before loading the container fileBorislav Petkov2009-11-101-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> LKML-Reference: <20091029134552.GC30802@alberich.amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-25 22:59:17 +0000