summaryrefslogtreecommitdiffstats
path: root/arch
Commit message (Collapse)AuthorAgeFilesLines
* ARM: OMAP2+: PRM: create PRM reset source API for the watchdog timer driverPaul Walmsley2012-10-2111-4/+306
| | | | | | | | | | | | | | | | | | The OMAP watchdog timer driver needs to determine what caused the SoC to reset for its GETBOOTSTATUS ioctl. So, define a set of standard reset sources across OMAP SoCs. For OMAP2xxx, 3xxx, and 4xxx SoCs, define mappings from the SoC-specific reset source register bits to the standardized reset source IDs. Create SoC-specific PRM functions that read the appropriate per-SoC register and use the mapping to return the standardized reset bits. Register the SoC-specific PRM functions with the common PRM code via prm_register(). Create a function in the common PRM code, prm_read_reset_sources(), that calls the SoC-specific function, registered during boot. This patch does not yet handle some SoCs, such as AM33xx. Those SoCs were not handled by the code this will replace. Signed-off-by: Paul Walmsley <paul@pwsan.com>
* ARM: OMAP1: create read_reset_sources() function (for initial use by watchdog)Paul Walmsley2012-10-212-0/+40
| | | | | | | | | | | | | | | | | | | On OMAP1, the existing OMAP watchdog driver reads a register directly from a non-watchdog IP block. It also does not convert the register's contents into the standard WDIOF_* bits expected from the GETBOOTSTATUS ioctl(). To move towards fixing these problems, create an function in arch/arm/mach-omap1 to return the reset source data. A subsequent patch will provide this function to the watchdog driver via platform_data. In the long term, the best approach would be to move this function to a new OMAP1 driver that handles access to the OMAP1 Clock Generation and Reset Management IP block. Then no platform_data would be needed. Signed-off-by: Paul Walmsley <paul@pwsan.com>
* ARM: OMAP2+: CM: prepare for use of cm_ll_data function pointersPaul Walmsley2012-10-213-1/+84
| | | | | | | | | | | | | | | | | There are several CM operations which behave similarly across OMAP2+ SoCs, but which have slight differences in their underlying implementations. This patch creates the support code for this function pointer registration process. No function pointers are included yet, but a subsequent patch will create these for the module IDLEST registers. This patch allows other code to use CM-provided data and operations without needing to know which SoC is currently in use. A further description of the concept is provided in the patch entitled "ARM: OMAP2+: PRM: prepare for use of prm_ll_data function pointers". Signed-off-by: Paul Walmsley <paul@pwsan.com>
* ARM: OMAP2+: PRM: prepare for use of prm_ll_data function pointersPaul Walmsley2012-10-212-0/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | There are several PRM operations which behave similarly across OMAP2+ SoCs, but which have slight differences in their underlying implementations. For example, to fetch the SoC's last reset sources, different registers are read across OMAP2xxx, 3xxx, and 44xx, and different bits are used on each SoC. But the information returned is so similar that a single, common interface for drivers is useful. This patch creates the support code for this function pointer registration process. No function pointers are included yet, but a subsequent patch will create one for the reset source API. To illustrate the end goal with the above reset source example, each per-SoC driver will use its own low-level implementation function -- e.g., prm2xxx.c would contain omap2xxx_prm_read_reset_sources(). This function would read the appropriate register and remap the register bits to a standard set of reset source bits. When the prm2xxx.c driver is loaded, it would register this function with the common PRM driver, prm.c. prm.c would then export a common function, omap_prm_read_reset_sources(). Calling it would call through to the function pointer for the currently-registered SoC PRM driver. This will allow other drivers to use PRM-provided data and operations without needing to know which SoC is currently in use. Signed-off-by: Paul Walmsley <paul@pwsan.com>
* ARM: OMAP2/3: clockdomain/PRM/CM: move the low-level clockdomain functions ↵Paul Walmsley2012-10-2113-574/+543
| | | | | | | | | | | | | | | | | | | | into PRM/CM Move the low-level SoC-specific clockdomain control functions into cm*.c and prm*.c. For example, OMAP2xxx low-level clockdomain functions go into cm2xxx.c. Then remove the unnecessary clockdomain*xxx*.c files. The objective is to centralize low-level CM and PRM register accesses into the cm*.[ch] and prm*.[ch] files, and then to export an OMAP SoC-independent API to higher-level OMAP power management code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific filesPaul Walmsley2012-10-2124-270/+440
| | | | | | | | | | | | | | | | Move OMAP3xxx-specific CM functions & macros into cm3xxx.[ch] and OMAP2xxx-specific macros into cm2xxx.[ch]. Move basic CM register access functions into static inline functions in cm2xxx_3xxx.h, leaving only OMAP2/3 hardreset functions in cm2xxx_3xxx.c. As part of this, split the CM and hwmod code that waits for devices to become ready into SoC-specific functions. This is in preparation for the upcoming move of this code to drivers/. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: OMAP2+: powerdomain/PRM: move the low-level powerdomain functions into PRMPaul Walmsley2012-10-2110-758/+739
| | | | | | | | | | | | | | | | | Move the low-level SoC-specific powerdomain control functions into prm*.c. For example, OMAP2xxx low-level powerdomain functions go into prm2xxx.c. Then remove the unnecessary powerdomain*xxx*.c files. The objective is to centralize low-level PRM register accesses into the prm*.[ch] files, and then to export an OMAP SoC-independent API to higher-level OMAP power management code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: OMAP2+: PRM: split PRM functions into OMAP2, OMAP3-specific filesPaul Walmsley2012-10-2117-531/+638
| | | | | | | | | | | | | | | | | | Move OMAP3xxx-specific PRM functions & macros into prm3xxx.[ch] and OMAP2xxx-specific macros into prm2xxx.h. (prm2xxx.c will be created by a subsequent patch when it's needed.) Move basic PRM register access functions into static inline functions in prm2xxx_3xxx.h, leaving only OMAP2/3 hardreset functions in prm2xxx_3xxx.c. Also clarify the initcall function naming to reinforce that this code is specifically for the PRM IP block. This is in preparation for the upcoming powerdomain series and the upcoming move of this code to drivers/. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: OMAP2+: PRM: remove PRM weak functionsPaul Walmsley2012-10-211-62/+0
| | | | | | | | | | | | | Remove the now-unused PRM weak functions from prm_common.c. These were formerly used to ensure that some OMAP2/3 PRM code would build on OMAP4, but none of those functions ever would have worked on OMAP4 due to an incompatible PRM register layout. Now all that has been cleaned up and these can be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* Merge tag 'arm64-fixes' of ↵Linus Torvalds2012-10-209-45/+83
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull arm64 fixes from Catalin Marinas: "Main changes: - AArch64 Linux compilation fixes following 3.7-rc1 changes (MODULES_USE_ELF_RELA, update_vsyscall() prototype) - Unnecessary register setting in start_thread() (thanks to Al Viro) - ptrace fixes" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: fix alignment padding in assembly code arm64: ptrace: use HW_BREAKPOINT_EMPTY type for disabled breakpoints arm64: ptrace: make structure padding explicit for debug registers arm64: No need to set the x0-x2 registers in start_thread() arm64: Ignore memory blocks below PHYS_OFFSET arm64: Fix the update_vsyscall() prototype arm64: Select MODULES_USE_ELF_RELA arm64: Remove duplicate inclusion of mmu_context.h in smp.c
| * arm64: fix alignment padding in assembly codeMarc Zyngier2012-10-202-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | An interesting effect of using the generic version of linkage.h is that the padding is defined in terms of x86 NOPs, which can have even more interesting effects when the assembly code looks like this: ENTRY(func1) mov x0, xzr ENDPROC(func1) // fall through ENTRY(func2) mov x0, #1 ret ENDPROC(func2) Admittedly, the code is not very nice. But having code from another architecture doesn't look completely sane either. The fix is to add arm64's version of linkage.h, which causes the insertion of proper AArch64 NOPs. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * arm64: ptrace: use HW_BREAKPOINT_EMPTY type for disabled breakpointsWill Deacon2012-10-181-16/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | If a debugger tries to zero a hardware debug control register, the kernel will try to infer both the type and length of the breakpoint in order to sanity-check against the requested regset type. This will fail because the encoding will appear as a zero-length breakpoint. This patch changes the control register setting so that disabled breakpoints are treated as HW_BREAKPOINT_EMPTY and no further sanity-checking is required. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * arm64: ptrace: make structure padding explicit for debug registersWill Deacon2012-10-182-7/+32
| | | | | | | | | | | | | | | | | | | | | | | | The user_hwdebug_state structure contains implicit padding to conform to the alignment requirements of the AArch64 ABI (namely that aggregates must be aligned to their most aligned member). This patch fixes the ptrace functions operating on struct user_hwdebug_state so that the padding is handled correctly. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * arm64: No need to set the x0-x2 registers in start_thread()Catalin Marinas2012-10-181-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For historical reasons, ARM used to set r0-r2 in start_thread() to the first values on the user stack when starting a new user application. The same logic has been inherited in AArch64. The x0 register is overridden by the sys_execve() return value so it's always zero on success. The x1 and x2 registers are ignored by AArch64 and EABI AArch32 applications, so we can safely remove the register setting for both native and compat user space. This also fixes a potential fault with the kernel accessing user space stack directly. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Al Viro <viro@zeniv.linux.org.uk>
| * arm64: Ignore memory blocks below PHYS_OFFSETCatalin Marinas2012-10-181-0/+12
| | | | | | | | | | | | | | | | | | | | According to Documentation/arm64/booting.txt, the kernel image must be loaded at a pre-defined offset from the start of RAM so that the kernel can calculate PHYS_OFFSET based on this address. If the DT contains memory blocks below this PHYS_OFFSET, report them and ignore the corresponding memory range. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * arm64: Fix the update_vsyscall() prototypeCatalin Marinas2012-10-181-10/+10
| | | | | | | | | | | | | | | | | | | | With commit 576094b7 (time: Introduce new GENERIC_TIME_VSYSCALL) the old update_vsyscall() prototype is no longer available. This patch updates the arm64 port. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Cc: John Stultz <john.stultz@linaro.org>
| * arm64: Select MODULES_USE_ELF_RELACatalin Marinas2012-10-181-0/+1
| | | | | | | | | | | | | | | | | | With commit 786d35d4 (make most arch asm/module.h files use asm-generic/module.h) arm64 needs to enable MODULES_USE_ELF_RELA for loadable modules. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Will Deacon <Will.Deacon@arm.com>
| * arm64: Remove duplicate inclusion of mmu_context.h in smp.cSachin Kamat2012-10-161-1/+0
| | | | | | | | | | | | | | asm/mmu_context.h was included twice. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* | Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds2012-10-191-0/+6
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Assorted small fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf python: Properly link with libtraceevent perf hists browser: Add back callchain folding symbol perf tools: Fix build on sparc. perf python: Link with libtraceevent perf python: Initialize 'page_size' variable tools lib traceevent: Fix missed freeing of subargs in free_arg() in filter lib tools traceevent: Add back pevent assignment in __pevent_parse_format() perf hists browser: Fix off-by-two bug on the first column perf tools: Remove warnings on JIT samples for srcline sort key perf tools: Fix segfault when using srcline sort key perf: Require exclude_guest to use PEBS - kernel side enforcement perf tool: Precise mode requires exclude_guest
| * \ Merge tag 'perf-urgent-for-mingo' of ↵Ingo Molnar2012-10-201-0/+6
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: * The python binding needs to link with libtraceevent and to initialize the 'page_size' variable so that mmaping works again. * The callchain folding character that appears on the TUI just before the overhead had disappeared due to recent changes, add it back. * Intel PEBS in VT-x context uses the DS address as a guest linear address, even though its programmed by the host as a host linear address. This either results in guest memory corruption and or the hardware faulting and 'crashing' the virtual machine. Therefore we have to disable PEBS on VT-x enter and re-enable on VT-x exit, enforcing a strict exclude_guest. Kernel side enforcement fix by Peter Zijlstra, tooling side fix by David Ahern. * Fix build on sparc due to UAPI, fix from David Miller. * Fixes for the srclike sort key for unresolved symbols and when processing samples in JITted code, where we don't have an ELF file, just an special symbol table, fixes from Namhyung Kim. * Fix some leaks in libtraceevent, from Steven Rostedt. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
| | * | perf: Require exclude_guest to use PEBS - kernel side enforcementPeter Zijlstra2012-10-161-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Intel PEBS in VT-x context uses the DS address as a guest linear address, even though its programmed by the host as a host linear address. This either results in guest memory corruption and or the hardware faulting and 'crashing' the virtual machine. Therefore we have to disable PEBS on VT-x enter and re-enable on VT-x exit, enforcing a strict exclude_guest. This patch enforces exclude_guest kernel side. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Avi Kivity <avi@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Robert Richter <robert.richter@amd.com> Link: http://lkml.kernel.org/r/1347569955-54626-3-git-send-email-dsahern@gmail.com Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* | | | Merge tag 'fixes-for-linus' of ↵Linus Torvalds2012-10-1925-66/+120
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc fixes from Olof Johansson: "A set of fixes and some minor cleanups for -rc2: - A series from Arnd that fixes warnings in drivers and other code included by ARM defconfigs. Most have been acked by corresponding maintainers (and seem quite hard to argue not picking up anyway in the few exception cases). - A few misc patches from the list for integrator/vt8500/i.MX - A batch of fixes to OMAP platforms, fixing: - boot problems on beaglebone, - regression fixes for local timers - clockdomain locking fixes - a few boot/sparse warnings - For Tegra: - Clock rate calculation overflow fix - Revert a change that removed timer clocks and a fix for symbol name clashes - For Renesas: - IO accessor / annotation cleanups to remove warnings - For Kirkwood/Dove/mvebu: - Fixes for device trees for Dove (some minor cleanups, some fixes) - Fixes for the mvebu gpio driver - Fix build problem for Feroceon due to missing ifdefs - Fix lsxl DTS files" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits) ARM: kirkwood: fix buttons on lsxl boards ARM: kirkwood: fix LEDs names for lsxl boards ARM: Kirkwood: fix disabling CACHE_FEROCEON_L2 gpio: mvebu: Add missing breaks in mvebu_gpio_irq_set_type ARM: dove: Add crypto engine to DT ARM: dove: Remove watchdog from DT ARM: dove: Restructure SoC device tree descriptor ARM: dove: Fix clock names of sata and gbe ARM: dove: Fix tauros2 device tree init ARM: dove: Add pcie clock support ARM: OMAP2+: Allow kernel to boot even if GPMC fails to reserve memory ARM: OMAP: clockdomain: Fix locking on _clkdm_clk_hwmod_enable / disable ARM: s3c: mark s3c2440_clk_add as __init_refok spi/s3c64xx: use correct dma_transfer_direction type ARM: OMAP4: devices: fixup OMAP4 DMIC platform device error message ARM: OMAP2+: clock data: Add dev-id for the omap-gpmc dummy fck ARM: OMAP: resolve sparse warning concerning debug_card_init() ARM: OMAP4: Fix twd_local_timer_register regression ARM: tegra: add tegra_timer clock ARM: tegra: rename tegra system timer ...
| * \ \ \ Merge tag 'kirkwood_fixes_for_v3.7' of ↵Olof Johansson2012-10-193-12/+12
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.infradead.org/users/jcooper/linux into fixes From Jason Cooper: - improve #ifdef logic to prevent linker errors with CACHE_FEROCEON_L2 - lsxl board dts fixes * tag 'kirkwood_fixes_for_v3.7' of git://git.infradead.org/users/jcooper/linux: ARM: kirkwood: fix buttons on lsxl boards ARM: kirkwood: fix LEDs names for lsxl boards ARM: Kirkwood: fix disabling CACHE_FEROCEON_L2
| | * | | | ARM: kirkwood: fix buttons on lsxl boardsMichael Walle2012-10-181-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change event type to switch for the power and autopower switches. Additionally, this patch aligns the keycodes with the other linkstation boards already supported by linux. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| | * | | | ARM: kirkwood: fix LEDs names for lsxl boardsMichael Walle2012-10-181-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Don't use the specific board name in a the common device tree include file. Instead use the common name 'lsxl'. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| | * | | | ARM: Kirkwood: fix disabling CACHE_FEROCEON_L2Jason Gunthorpe2012-10-182-4/+2
| | | |_|/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the CACHE_FEROCEON_L2 test to kirkwood_l2_init, since linking fails on the reference to feroceon_l2_init. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| * | | | Merge branch 'testing/driver-warnings' of ↵Olof Johansson2012-10-191-1/+1
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into fixes A collection of warning fixes on non-ARM code from Arnd Bergmann: * 'testing/driver-warnings' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: s3c: mark s3c2440_clk_add as __init_refok spi/s3c64xx: use correct dma_transfer_direction type pcmcia: sharpsl: don't discard sharpsl_pcmcia_ops USB: EHCI: mark ehci_orion_conf_mbus_windows __devinit mm/slob: use min_t() to compare ARCH_SLAB_MINALIGN SCSI: ARM: make fas216_dumpinfo function conditional SCSI: ARM: ncr5380/oak uses no interrupts
| | * | | | ARM: s3c: mark s3c2440_clk_add as __init_refokArnd Bergmann2012-10-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | s3c2440_clk_add is a subsys_interface method and calls clkdev_add_table, which is marked as __init. The modpost script complains about this because we must not call an __init function from a function in the .text section, and we cannot reference an __init function from a subsys_interface pointer. I have verified that the only code path into s3c2440_clk_add() is from "int __init s3c2440_init(void)", so s3c2440_clk_add can be marked __init_refok instead. Without this patch, building mini2440_defconfig results in: WARNING: vmlinux.o(.text+0x9848): Section mismatch in reference from the function s3c2440_clk_add() to the function .init.text:clkdev_add_table() The function s3c2440_clk_add() references the function __init clkdev_add_table(). This is often because s3c2440_clk_add lacks a __init annotation or the annotation of clkdev_add_table is wrong. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mike Turquette <mturquette@linaro.org> Cc: Ben Dooks <ben-linux@fluff.org>
| * | | | | Merge tag 'mvebu_dove_late_fixes_for_v3.7' of ↵Olof Johansson2012-10-173-21/+41
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.infradead.org/users/jcooper/linux into fixes From Jason Cooper: Misc. fixes for latest changes to mach-dove/ Fixes build breakage for mach-dove * tag 'mvebu_dove_late_fixes_for_v3.7' of git://git.infradead.org/users/jcooper/linux: ARM: dove: Add crypto engine to DT ARM: dove: Remove watchdog from DT ARM: dove: Restructure SoC device tree descriptor ARM: dove: Fix clock names of sata and gbe ARM: dove: Fix tauros2 device tree init ARM: dove: Add pcie clock support
| | * | | | | ARM: dove: Add crypto engine to DTSebastian Hesselbarth2012-10-172-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make use of DT support for the crypto engine on dove and remove the obsolete init call. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| | * | | | | ARM: dove: Remove watchdog from DTSebastian Hesselbarth2012-10-171-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The watchdog on dove requires an interrupt that is not yet available on DT. Therefore, the watchdog DT node is removed until the corresponding chained intc is available. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| | * | | | | ARM: dove: Restructure SoC device tree descriptorSebastian Hesselbarth2012-10-171-12/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds proper ranges for all mapped addresses within dove SoC and moves the interrupt controller node inside the simple-bus node. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| | * | | | | ARM: dove: Fix clock names of sata and gbeSebastian Hesselbarth2012-10-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes wrong clock names of lately added clock gates for sata and gbe (mv64xx_eth). Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| | * | | | | ARM: dove: Fix tauros2 device tree initSebastian Hesselbarth2012-10-172-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During the review process of dove DT patches, Tauros2 cache init call was changed and DT support added. This patch fixes the call to Tauros2 init and adds a DT node. Moreover, plat/irq.h include was missing from mach-dove/common.c. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| | * | | | | ARM: dove: Add pcie clock supportSebastian Hesselbarth2012-10-171-0/+5
| | | |/ / / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As dove now has clock gating control ensure pcie ports grab their clocks. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| * | | | | Merge tag 'omap-for-v3.7-rc1/fixes-take5-signed' of ↵Olof Johansson2012-10-176-12/+34
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: A boot problem fix for am33xx beaglebone caused by GPMC, a regression fix for local timer, and a clockdomain locking fix. Also few minor fixes for boot time and sparse warnings. * tag 'omap-for-v3.7-rc1/fixes-take5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Allow kernel to boot even if GPMC fails to reserve memory ARM: OMAP: clockdomain: Fix locking on _clkdm_clk_hwmod_enable / disable ARM: OMAP4: devices: fixup OMAP4 DMIC platform device error message ARM: OMAP2+: clock data: Add dev-id for the omap-gpmc dummy fck ARM: OMAP: resolve sparse warning concerning debug_card_init() ARM: OMAP4: Fix twd_local_timer_register regression
| | * | | | | ARM: OMAP2+: Allow kernel to boot even if GPMC fails to reserve memoryJon Hunter2012-10-171-5/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, if the GPMC driver fails to reserve memory when probed we will call BUG() and the kernel will not boot. Instead of calling BUG(), return an error from probe and allow kernel to boot. Boot tested on AM335x beagle bone board and OMAP4430 Panda board. V2 changes: - Ensure that clock and memory resources are released on error. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | | | ARM: OMAP: clockdomain: Fix locking on _clkdm_clk_hwmod_enable / disableTero Kristo2012-10-171-4/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously the code only acquired spinlock after increasing / decreasing the usecount value, which is wrong. This leaves a small window where a task switch may occur between the check of the usecount and the actual wakeup / sleep of the domain. Fixed by moving the spinlock locking before the usecount access. Left the usecount as atomic_t if someone wants an easy access to the parameter through atomic_read. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | | | ARM: OMAP4: devices: fixup OMAP4 DMIC platform device error messageSebastien Guiriec2012-10-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Correct DMIC hwmod lockup error message and replace printk() by pr_err(). Signed-off-by: Sebastien Guiriec <s-guiriec@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | | | ARM: OMAP2+: clock data: Add dev-id for the omap-gpmc dummy fckBenoit Cousson2012-10-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GPMC code has been converted to a driver by the following commit: commit da496873970c57c4b31e186d967933da0ffa0d7c Author: Afzal Mohammed <afzal@ti.com> Date: Sun Sep 23 17:28:25 2012 -0600 ARM: OMAP2+: gpmc: minimal driver support It now requests a clock with con-id "fck" otherwise the probe will fails. [ 0.342010] omap-gpmc omap-gpmc: error: clk_get [ 0.346771] omap-gpmc: probe of omap-gpmc failed with error -2 Add the "omap-gmpc" dev-id and fck con-id to the already existing gmpc-fck dummy clock. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Afzal Mohammed <afzal@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | | | ARM: OMAP: resolve sparse warning concerning debug_card_init()Paul Walmsley2012-10-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 801475ccb2b2c1928b22aec4b9e5285d9e347602 ("ARM: OMAP: move debug_card_init() function") results in the following new sparse warning: arch/arm/plat-omap/debug-devices.c:71:12: warning: symbol 'debug_card_init' was not declared. Should it be static? Fix by implementing Tony's suggestion to add a "sideways include" to the new location of the debug-devices.h file in arch/arm/mach-omap2/. Signed-off-by: Paul Walmsley <paul@pwsan.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | | | ARM: OMAP4: Fix twd_local_timer_register regressionTony Lindgren2012-10-161-1/+1
| | |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 7d7e1eba (ARM: OMAP2+: Prepare for irqs.h removal) changed the interrupts to allow enabling sparse IRQ, but accidentally added the omap3 INTC base to the local IRQ. This causes the following: twd: can't register interrupt 45 (-22) twd_local_timer_register failed -22 The right fix is to not add any base, as it is a local timer. For the OMAP44XX_IRQ_LOCALWDT we had defined earlier there are no users, so no need to fix that. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | | | Merge tag 'tegra-for-3.7-fixes-for-rc2' of ↵Olof Johansson2012-10-177-5/+7
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into fixes From Stephen Warren: ARM: tegra: fixes for 3.7-rc2 This branch contains a couple small fixes for Tegra for 3.7. * A fix for another clock rate calculation overflow * A revert of a change that removed the "timer" clock on Tegra, coupled with a fix for the confusing symbol name clash that triggered it. * tag 'tegra-for-3.7-fixes-for-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: ARM: tegra: add tegra_timer clock ARM: tegra: rename tegra system timer ARM: tegra30: clk: Fix output_rate overflow Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | | | ARM: tegra: add tegra_timer clockSivaram Nair2012-10-162-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This undoes commit 20f4665 "ARM: tegra: remove tegra_timer from tegra_list_clks" by bringing back the tegra_timer clock. tegra_timer is indeed a clock (hidden by the PERIPH_CLK macro) which should be added to the tegra_list_clks. The above commit caused tegra_init_timer() failing to get the clk reference. Signed-off-by: Sivaram Nair <sivaramn@nvidia.com> [swarren: added the reverted commit's subject to this patch description] Signed-off-by: Stephen Warren <swarren@nvidia.com>
| | * | | | | ARM: tegra: rename tegra system timerSivaram Nair2012-10-164-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The timer variable is renamed to avoid confusion and symbol name clash with the tegra_timer clock. Signed-off-by: Sivaram Nair <sivaramn@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
| | * | | | | ARM: tegra30: clk: Fix output_rate overflowMark Zhang2012-10-161-1/+1
| | |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change the type of variable from "unsigned long" to "u64". This avoids the overflow while clock rate calculating. Signed-off-by: Mark Zhang <markz@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
| * | | | | Merge branch 'fixes' of ↵Olof Johansson2012-10-172-12/+12
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes From Simon Horman: "Please consider the following fix for the KZM-A9-GT board for 3.7. They both resolve fallout from recent IOMEM() changes." * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7779: use __iomem pointers for MMIO ARM: shmobile: armadillo800eva: __io abuse cleanup
| | * | | | | ARM: shmobile: r8a7779: use __iomem pointers for MMIOKuninori Morimoto2012-10-161-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 0a4b04dc299dfb691827a4001b3d8d7e443b71c9 (ARM: shmobile: use __iomem pointers for MMIO) modified iomem pointers so that IOMEM() macro will be used, but clock-r8a7779.c was out of target. This patch fixes it up. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
| | * | | | | ARM: shmobile: armadillo800eva: __io abuse cleanupKuninori Morimoto2012-10-151-1/+1
| | |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | a2a47ca36642e3995e982957bc42678cf11ca6ac (ARM: __io abuse cleanup) cleanuped __io() -> IOMEM(), but armadillo800eva was a outside of a target, since "merge window" timing issue. This patch cleanup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
| * | | | | ARM: dts: imx6q-arm2: move NANDF_CS pins out of 'hog'Shawn Guo2012-10-161-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 9e3c0066 (ARM: dts: imx6q-arm2: add pinctrl for uart and enet) defines NANDF_CS pins as gpio in 'hog', assuming these two pins are always used by usdhc3 in gpio mode as card-detection and write-protection on ARM2 board. But it's not true. These pins are shared by usdhc3 and gpmi-nand. We should have the pins functional for gpmi-nand when usdhc3 is disabled. Move the pins out of 'hog', so that pins only work in gpio mode as CD and WP when usdhc3 is enabled, and otherwise they are available for gpmi-nand. Reported-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-24 20:15:14 +0000