summaryrefslogtreecommitdiffstats
path: root/arch
Commit message (Collapse)AuthorAgeFilesLines
* powerpc: Implement tick broadcast IPI as a fixed IPI messageSrivatsa S. Bhat2014-03-056-7/+26
| | | | | | | | | | | | | | | | | | | For scalability and performance reasons, we want the tick broadcast IPIs to be handled as efficiently as possible. Fixed IPI messages are one of the most efficient mechanisms available - they are faster than the smp_call_function mechanism because the IPI handlers are fixed and hence they don't involve costly operations such as adding IPI handlers to the target CPU's function queue, acquiring locks for synchronization etc. Luckily we have an unused IPI message slot, so use that to implement tick broadcast IPIs efficiently. Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> [Functions renamed to tick_broadcast* and Changelog modified by Preeti U. Murthy<preeti@linux.vnet.ibm.com>] Signed-off-by: Preeti U. Murthy <preeti@linux.vnet.ibm.com> Acked-by: Geoff Levand <geoff@infradead.org> [For the PS3 part] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Free up the slot of PPC_MSG_CALL_FUNC_SINGLE IPI messageSrivatsa S. Bhat2014-03-054-10/+8
| | | | | | | | | | | | | | | | The IPI handlers for both PPC_MSG_CALL_FUNC and PPC_MSG_CALL_FUNC_SINGLE map to a common implementation - generic_smp_call_function_single_interrupt(). So, we can consolidate them and save one of the IPI message slots, (which are precious on powerpc, since only 4 of those slots are available). So, implement the functionality of PPC_MSG_CALL_FUNC_SINGLE using PPC_MSG_CALL_FUNC itself and release its IPI message slot, so that it can be used for something else in the future, if desired. Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Preeti U. Murthy <preeti@linux.vnet.ibm.com> Acked-by: Geoff Levand <geoff@infradead.org> [For the PS3 part] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* parisc: add flexible mmap memory layout supportHelge Deller2014-02-026-43/+233
| | | | | | | | | Add support for the flexible mmap memory layout (as described in http://lwn.net/Articles/91829). This is especially very interesting on parisc since we currently only support 32bit userspace (even with a 64bit Linux kernel). Signed-off-by: Helge Deller <deller@gmx.de>
* parisc: Make EWOULDBLOCK be equal to EAGAIN on pariscGuy Martin2014-02-021-1/+1
| | | | | | | | | | On Linux, only parisc uses a different value for EWOULDBLOCK which causes a lot of troubles for applications not checking for both values. Since the hpux compat is long dead, make EWOULDBLOCK behave the same as all other architectures. Signed-off-by: Guy Martin <gmsoft@tuxicoman.be> Signed-off-by: Helge Deller <deller@gmx.de>
* parisc: convert uapi/asm/stat.h to use native types onlyHelge Deller2014-02-021-21/+19
| | | | | | | | | The stat.h header file is exported to userspace. Some userspace applications failed to compile due to missing/unknown types, so we better convert it to use native types only (like it's done on other architectures too). Signed-off-by: Helge Deller <deller@gmx.de>
* parisc: wire up sched_setattr and sched_getattrHelge Deller2014-02-022-1/+5
| | | | Signed-off-by: Helge Deller <deller@gmx.de>
* parisc: fix cache-flushingHelge Deller2014-02-023-3/+16
| | | | | | | | | | | | | | | This commit: f8dae00684d678afa13041ef170cecfd1297ed40: parisc: Ensure full cache coherency for kmap/kunmap caused negative caching side-effects, e.g. hanging processes with expect and too many inequivalent alias messages from flush_dcache_page() on Debian 5 systems. This patch now partly reverts it and has been in production use on our debian buildd makeservers since a week without any major problems. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # v3.9+ Signed-off-by: Helge Deller <deller@gmx.de>
* Merge tag 'fixes-for-linus' of ↵Linus Torvalds2014-02-0227-43/+381
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Here's a set of patches for (hopefully) -rc1. Some of them are fixes, but a good number of them also do things such as enable new drivers in the defconfigs for platforms that have such devices, increases coverage of the multiplatform defconfig and some DTS changes that plumbs up some of the devices that now have bindings and driver support. The commit dates are recent; we've mostly collected these fixes in the last few days but I also had to rebuild the branch yesterday to sort out some internal conflicts which reset the timestamps. The changes should have been tested by each platform maintainer already (and few of them have cross-platform impact) so I'm personally not too concerned by it at this time" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits) ARM: multi_v7_defconfig: remove redundant entries and re-enable TI_EDMA ARM: multi_v7_defconfig: add mvebu drivers clocksource: kona: Add basic use of external clock drivers: bus: fix CCI driver kcalloc call parameters swap ARM: dts: bcm28155-ap: Fix Card Detection GPIO ARM: multi_v7_defconfig: Select CONFIG_AT803X_PHY ARM: keystone: config: fix build warning when CONFIG_DMADEVICES is not set MAINTAINERS: ARM: SiRF: use regex patterns to involve all SiRF drivers ARM: dts: zynq: Add SDHCI nodes ARM: hisi: don't select SMP ARM: tegra: rebuild tegra_defconfig to add DEBUG_FS ARM: multi_v7: copy most options from tegra_defconfig ARM: iop32x: fix power off handling for the EM7210 board ARM: integrator: restore static map on the CP ARM: msm_defconfig: Enable MSM clock drivers ARM: dts: msm: Add clock controller nodes and hook into uart ARM: OMAP4+: move errata initialization to omap4_pm_init_early ARM: OMAP4460: cpuidle: Extend PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD on cpuidle ARM: mvebu: fix compilation warning on Armada 370 (i.e. non-SMP) ARM: shmobile: r8a7790.dtsi: ficx i2c[0-3] clock reference ...
| * ARM: multi_v7_defconfig: remove redundant entries and re-enable TI_EDMAOlof Johansson2014-01-311-10/+2
| | | | | | | | | | | | | | | | | | | | | | | | TI_EDMA fell out of automatically selected options in the multi_v7 defconfig due to a select being removed from the davinci Kconfig entry. So we need to re-enable explicitly to not regress some platforms. The rest is just the result of running 'make multi_v7_defconfig + make savedefconfig' to remove entries that are no longer needed due to changed dependencies/selects or defaults. Signed-off-by: Olof Johansson <olof@lixom.net>
| * ARM: multi_v7_defconfig: add mvebu driversOlof Johansson2014-01-311-0/+10
| | | | | | | | | | | | | | | | | | Recent boot farm testing has highlighted some issues with mvebu and multiplatform kernels. Increase the test coverage so we can discover these issues earlier. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net>
| * ARM: dts: bcm28155-ap: Fix Card Detection GPIOTim Kryger2014-01-311-1/+3
| | | | | | | | | | | | | | | | | | | | | | The board schematic states that the "SD_CARD_DET_N gets pulled to GND when card is inserted" so the polarity has been updated to active low. Polarity is now specified with a GPIO define instead of a magic number. Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| * Merge tag 'renesas-dt-fixes2-for-v3.14' of ↵Olof Johansson2014-01-311-4/+4
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Second Round of Renesas ARM Based SoC DT Fixes for v3.14 Correct i2c clock references for r8a7790 (R-Car H2) SoC The error was introduced in 72197ca7a1cb1cea5 ("ARM: shmobile: r8a7790: Reference clocks") which is queued up for v3.14. * tag 'renesas-dt-fixes2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7790.dtsi: ficx i2c[0-3] clock reference Signed-off-by: Olof Johansson <olof@lixom.net>
| | * ARM: shmobile: r8a7790.dtsi: ficx i2c[0-3] clock referenceBen Dooks2014-01-211-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The R8A7790's dtsi file i2c0, i2c1, i2c2, and i2c3 nodes have clock references to the mstp3_clks clock node, however these clocks are in the mstp9_clks node. The error was introducted in 72197ca7a1cb1cea5 ("ARM: shmobile: r8a7790: Reference clocks") which is in Simon's current development tree. This patch fixes the following error: of_clk_src_onecell_get: invalid clock index 31 i2c-rcar e6508000.i2c: cannot get clock i2c-rcar: probe of e6508000.i2c failed with error -2 Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
| * | ARM: multi_v7_defconfig: Select CONFIG_AT803X_PHYFabio Estevam2014-01-311-0/+1
| | | | | | | | | | | | | | | | | | | | | Select CONFIG_AT803X_PHY so that we can boot hummingboard via NFS. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | ARM: keystone: config: fix build warning when CONFIG_DMADEVICES is not setGrygorii Strashko2014-01-312-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Drop automatic selection of TI_EDMA from Keystone Kconfig file, as it produces build warning in case if CONFIG_DMADEVICES is not set: warning: (ARCH_KEYSTONE) selects TI_EDMA which has unmet direct dependencies (DMADEVICES && (ARCH_DAVINCI || ARCH_OMAP || ARCH_KEYSTONE)) Instead enable TI EDMA support from defconfig. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | Merge tag 'mvebu-fixes-3.13-2' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson2014-01-313-3/+50
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mvebu fixes for v3.13 (incremental #2) - allow building and booting DT and non-DT plat-orion SoCs - catch proper return value for kirkwood_pm_init() - properly check return of of_iomap to solve boot hangs (mirabox, others) - remove a compile warning on Armada 370 with non-SMP. * tag 'mvebu-fixes-3.13-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: fix compilation warning on Armada 370 (i.e. non-SMP) ARM: mvebu: Fix kernel hang in mvebu_soc_id_init() when of_iomap failed ARM: kirkwood: kirkwood_pm_init() should return void ARM: orion: provide C-style interrupt handler for MULTI_IRQ_HANDLER Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | ARM: mvebu: Fix kernel hang in mvebu_soc_id_init() when of_iomap failedGregory CLEMENT2014-01-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When pci_base is accessed whereas it has not been properly mapped by of_iomap() the kernel hang. The check of this pointer made an improper use of IS_ERR() instead of comparing to NULL. This patch fix this issue. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reported-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Cc: stable@vger.kernel.org # v3.12+: af8d1c63afcb: ARM: mvebu: Add support to get the ID and the revision of a SoC Cc: stable@vger.kernel.org # v3.12+: 85e618a1be2b: ARM: mvebu: Add quirk for i2c for the OpenBlocks AX3-4 board Cc: stable@vger.kernel.org # v3.12+: 6cf70ae928ba: i2c: mv64xxx: Fix bus hang on A0 version of the Armada XP SoCs Cc: stable@vger.kernel.org # v3.12+: f8b94beb7e6a: i2c: mv64xxx: Document the newly introduced Armada XP A0 compatible Cc: stable@vger.kernel.org # v3.12+ Fixes: 930ab3d403ae (i2c: mv64xxx: Add I2C Transaction Generator support) Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| | * | ARM: kirkwood: kirkwood_pm_init() should return voidEzequiel Garcia2014-01-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This function was originally meant to return void as declared in the common.h header. Fix it and include the header to catch these errors in the future. [jac] removed 'return 0;' to clear this warning: arch/arm/mach-kirkwood/pm.c: In function 'kirkwood_pm_init': arch/arm/mach-kirkwood/pm.c:73:2: warning: 'return' with a value, in function returning void [enabled by default] Reported-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| | * | ARM: orion: provide C-style interrupt handler for MULTI_IRQ_HANDLERSebastian Hesselbarth2014-01-161-0/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DT-enabled Marvell Kirkwood and Dove SoCs make use of an irqchip driver. As expected for irqchip drivers, it uses a C-style interrupt handler and therefore selects MULTI_IRQ_HANDLER. Now, compiling a kernel with both non-DT and DT support enabled, selecting MULTI_IRQ_HANDLER will break ASM irq handler used by non-DT boards. Therefore, we provide a C-style irq handler even for non-DT boards, if MULTI_IRQ_HANDLER is set. By installing the C-style irq handler in orion_irq_init this is transparent to all non-DT board files. While the regression report was filed on Marvell Kirkwood, also Marvell Dove non-DT boards are affected and fixed by this patch. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Ian Campbell <ijc@hellion.org.uk> Reported-by: Ian Campbell <ijc@hellion.org.uk> Cc: <stable@vger.kernel.org> # v3.12+ Fixes: 2326f04321a9 ("ARM: kirkwood: convert to DT irqchip and clocksource") Fixes: f07d73e33d0e ("ARM: dove: convert to DT irqchip and clocksource") Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| * | | ARM: dts: zynq: Add SDHCI nodesSoren Brinkmann2014-01-314-0/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add nodes for the Arasan SDHCI controller to Zynq dts files. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | ARM: hisi: don't select SMPRob Herring2014-01-311-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SMP is a user configurable option, not a hardware feature and should not be selected. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | ARM: tegra: rebuild tegra_defconfig to add DEBUG_FSStephen Warren2014-01-311-8/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DEBUG_FS used to be selected by COMMON_CLK_DEBUG, which was enabled by tegra_defconfig. However, this config option no longer exists, so no longer selects DEBUG_FS, and nothing else selects it either. So, "make tegra_defconfig" no longer enables DEBUG_FS in .config. Rebuild tegra_defconfig on top of next-20140424, while manually re-enabling DEBUG_FS. Reasons for removed entries are: - I2C_MUX: selected by MEDIA_SUBDRV_AUTOSELECT - DRM_PANEL: selected by DRM_TEGRA - NEW_LEDS: selected by many things; at least VT - LEDS_CLASS: selected by many things; at least VT - LEDS_TRIGGERS: selected by many things; at least VT - COMMON_CLK_DEBUG: no longer exists Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
| * | | ARM: multi_v7: copy most options from tegra_defconfigStephen Warren2014-01-311-11/+142
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | ARM: iop32x: fix power off handling for the EM7210 boardLinus Walleij2014-01-311-5/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board was missed when converting all the others to proper abstracted GPIO handling. Fix it up the right way by requesting and driving GPIO line 0 high through gpiolib to power off the machine. Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | ARM: integrator: restore static map on the CPLinus Walleij2014-01-311-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 78d1632183454dba46ca8295484a5e7603acdc18 deleted the static mappings of the core modules, but this static map is still needed on the Integrator/CP (not the Integrator/AP). Restore the static map on the Integrator/CP. Reported-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | ARM: msm_defconfig: Enable MSM clock driversStephen Boyd2014-01-311-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows us to probe the clock controller devices and boot to a serial console on all DT enabled MSM platforms. Cc: David Brown <davidb@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | ARM: dts: msm: Add clock controller nodes and hook into uartStephen Boyd2014-01-313-0/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the necessary DT nodes to probe the clock controllers on MSM devices as well as hook up the uart nodes to the clock controllers. This should allow us to boot to a serial console on all DT enabled MSM platforms. Cc: David Brown <davidb@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | ARM: OMAP4+: move errata initialization to omap4_pm_init_earlyNishanth Menon2014-01-314-5/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move all OMAP4 PM errata initializations to centralized location in omap4_pm_init_early. This allows for users to utilize the erratas in various submodules as needed. Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | ARM: OMAP4460: cpuidle: Extend PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD on cpuidleStrashko, Grygorii2014-01-314-5/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The same workaround as ff999b8a0983ee15668394ed49e38d3568fc6859 "ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX GIC ..." need to be applied not only when system is booting, but when MPUSS hits OSWR state through CPUIdle too. Without this WA the same issue is reproduced now on boards PandaES and Tablet/Blaze with SOM OMAP4460 when CONFIG_CPU_IDLE is enabled. After MPUSS has enterred OSWR and waken up: - GIC distributor became disabled forever - scheduling is not performed any more Cc: Kevin Hilman <khilman@linaro.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reported-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
* | | | tile: remove compat_sys_lookup_dcookie declaration to fix compile errorHeiko Carstens2014-02-011-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With commit d8d14bd09cdd ("fs/compat: fix lookup_dcookie() parameter handling") I changed the type of the len parameter of the lookup_dcookie() syscall. However I missed that there was still a stale declaration in arch/tile/.. which now causes a compile error on tile: In file included from fs/dcookies.c:28:0: include/linux/compat.h:425:17: error: conflicting types for 'compat_sys_lookup_dcookie' fs/dcookies.c:207:1: error: conflicting types for 'compat_sys_lookup_dcookie' Simply remove the declaration in the tile architecture, which is only a leftover from before the different compat lookup_dcookie() versions have been merged. The correct declaration is now in include/linux/compat.h The build error was reported by Fenguang's build bot. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | Merge tag 'arm64-upstream' of ↵Linus Torvalds2014-01-318-43/+74
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pyll ARM64 patches from Catalin Marinas: - Build fix with DMA_CMA enabled - Introduction of PTE_WRITE to distinguish between writable but clean and truly read-only pages - FIQs enabling/disabling clean-up (they aren't used on arm64) - CPU resume fix for the per-cpu offset restoring - Code comment typos * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mm: Introduce PTE_WRITE arm64: mm: Remove PTE_BIT_FUNC macro arm64: FIQs are unused arm64: mm: fix the function name in comment of cpu_do_switch_mm arm64: fix build error if DMA_CMA is enabled arm64: kernel: fix per-cpu offset restore on resume arm64: mm: fix the function name in comment of __flush_dcache_area arm64: mm: use ubfm for dcache_line_size
| * | | | arm64: mm: Introduce PTE_WRITESteve Capper2014-01-311-23/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have the following means for encoding writable or dirty ptes: PTE_DIRTY PTE_RDONLY !pte_dirty && !pte_write 0 1 !pte_dirty && pte_write 0 1 pte_dirty && !pte_write 1 1 pte_dirty && pte_write 1 0 So we can't distinguish between writable clean ptes and read only ptes. This can cause problems with ptes being incorrectly flagged as read only when they are writable but not dirty. This patch introduces a new software bit PTE_WRITE which allows us to correctly identify writable ptes. PTE_RDONLY is now only clear for valid ptes where a page is both writable and dirty. Signed-off-by: Steve Capper <steve.capper@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * | | | arm64: mm: Remove PTE_BIT_FUNC macroSteve Capper2014-01-311-10/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Expand out the pte manipulation functions. This makes our life easier when using things like tags and cscope. Signed-off-by: Steve Capper <steve.capper@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * | | | arm64: FIQs are unusedNicolas Pitre2014-01-302-8/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So any FIQ handling is superfluous at the moment. The functions to disable/enable FIQs is kept around if ever someone needs them in the future, but existing calling sites including arch_cpu_idle_prepare() may go for now. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * | | | arm64: mm: fix the function name in comment of cpu_do_switch_mmJingoo Han2014-01-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the function name of comment of cpu_do_switch_mm, because cpu_do_switch_mm is the correct name. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * | | | arm64: fix build error if DMA_CMA is enabledPankaj Dubey2014-01-271-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | arm64/include/asm/dma-contiguous.h is trying to include <asm-genric/dma-contiguous.h> which does not exist, and thus failing build for arm64 if we enable CONFIG_DMA_CMA. This patch fixes build error by removing unwanted header inclusion from arm64's dma-contiguous.h. Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Somraj Mani <somraj.mani@samsung.com> Acked-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * | | | arm64: kernel: fix per-cpu offset restore on resumeLorenzo Pieralisi2014-01-241-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The introduction of percpu offset optimisation through tpidr_el1 in: Commit id :7158627686f02319c50c8d9d78f75d4c8 "arm64: percpu: implement optimised pcpu access using tpidr_el1" requires cpu_{suspend/resume} to restore the tpidr_el1 register upon resume so that percpu variables can be addressed correctly when a CPU comes out of reset from warm-boot. This patch fixes cpu_{suspend}/{resume} tpidr_el1 restoration on resume, by calling the set_my_cpu_offset C API, as it is done on primary and secondary CPUs on cold boot, so that, even if the register used to store the percpu offset is changed, the save and restore of general purpose registers does not have to be updated. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * | | | arm64: mm: fix the function name in comment of __flush_dcache_areaJingoo Han2014-01-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the function name of comment of __flush_dcache_area, because __flush_dcache_area is the correct name. Also, the missing variable 'size' is added to the comment. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * | | | arm64: mm: use ubfm for dcache_line_sizeJingoo Han2014-01-221-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use 'ubfm' for the bitfield move instruction; thus, single instruction can be used instead of two instructions, when getting the minimum D-cache line size from CTR_EL0 register. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* | | | | Merge branch 'for-linus' of ↵Linus Torvalds2014-01-318-3/+87
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha Pull alpha updates from Matt Turner: "A pair of changes for alpha. One fixes a networking regression, and the second adds audit syscall support which will help in supporting systemd" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha: alpha: fix broken network checksum alpha: Enable system-call auditing support.
| * | | | | alpha: fix broken network checksumMikulas Patocka2014-01-311-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch 3ddc5b46a8e90f3c9251338b60191d0a804b0d92 breaks networking on alpha (there is a follow-up fix 5cfe8f1ba5eebe6f4b6e5858cdb1a5be4f3272a6, but networking is still broken even with the second patch). The patch 3ddc5b46a8e90f3c9251338b60191d0a804b0d92 makes csum_partial_copy_from_user check the pointer with access_ok. However, csum_partial_copy_from_user is called also from csum_partial_copy_nocheck and csum_partial_copy_nocheck is called on kernel pointers and it is supposed not to check pointer validity. This bug results in ssh session hangs if the system is loaded and bulk data are printed to ssh terminal. This patch fixes csum_partial_copy_nocheck to call set_fs(KERNEL_DS), so that access_ok in csum_partial_copy_from_user accepts kernel-space addresses. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Matt Turner <mattst88@gmail.com>
| * | | | | alpha: Enable system-call auditing support.蔡正龙2014-01-317-1/+80
| | |/ / / | |/| | | | | | | | | | | | | | | | | | Signed-off-by: Zhenglong.cai <zhenglong.cai@cs2c.com.cn> Signed-off-by: Matt Turner <mattst88@gmail.com>
* | | | | Merge branch 'v4l_for_linus' of ↵Linus Torvalds2014-01-313-2/+11
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - a new jpeg codec driver for Samsung Exynos (jpeg-hw-exynos4) - a new dvb frontend for ds2103 chipset (m88ds2103) - a new sensor driver for Samsung S5K5BAF UXGA (s5k5baf) - new drivers for R-Car VSP1 - a new radio driver: radio-raremono - a new tuner driver for ts2022 chipset (m88ts2022) - the analog part of em28xx is now a separate module that only load/runs if the device is not a pure digital TV device - added a staging driver for bcm2048 radio devices - the omap 2 video driver (omap24xx) was moved to staging. This driver is for an old hardware and uses a deprecated Kernel internal API. If nobody cares enough to fix it, it would be removed on a couple Kernel releases - the sn9c102 driver was moved to staging. This driver was replaced by gspca, and disabled on some distros, as almost all devices are known to work properly with gspca. It should be removed from kernel on a couple Kernel releases - lots of driver fixes, improvements and cleanups * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (421 commits) [media] media: v4l2-dev: fix video device index assignment [media] rc-core: reuse device numbers [media] em28xx-cards: properly initialize the device bitmap [media] Staging: media: Fix line length exceeding 80 characters in as102_drv.c [media] Staging: media: Fix line length exceeding 80 characters in as102_fe.c [media] Staging: media: Fix quoted string split across line in as102_fe.c [media] media: st-rc: Add reset support [media] m2m-deinterlace: fix allocated struct type [media] radio-usb-si4713: fix sparse non static symbol warnings [media] em28xx-audio: remove needless check before usb_free_coherent() [media] au0828: Fix sparse non static symbol warning Revert "[media] go7007-usb: only use go->dev after allocated" [media] em28xx-audio: provide an error code when URB submit fails [media] em28xx: fix check for audio only usb interfaces when changing the usb alternate setting [media] em28xx: fix usb alternate setting for analog and digital video endpoints > 0 [media] em28xx: make 'em28xx_ctrl_ops' static em28xx-alsa: Fix error patch for init/fini [media] em28xx-audio: flush work at .fini [media] drxk: remove the option to load firmware asynchronously [media] em28xx: adjust period size at runtime ...
| * | | | | [media] adv7842: set LLC DLL phase from platform_dataHans Verkuil2014-01-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The correct LLC DLL phase depends on the board layout, so this should be part of the platform_data. Also updated the platform_data in ezkit to ensure that what was the old default value is now explicitly specified, so the behavior for that board is unchanged. Tested-by: Martin Bugge <marbugge@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
| * | | | | [media] adv7842: obtain free-run mode from the platform_dataMartin Bugge2014-01-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The free-run mode can be board-specific. Also updated the platform_data in ezkit to ensure that what was the old default value is now explicitly specified, so the behavior for that board is unchanged. Signed-off-by: Martin Bugge <marbugge@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
| * | | | | [media] adv7842: support YCrCb analog input, receive CEA formats as RGB on ↵Hans Verkuil2014-01-071-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | VGA input Added support for YCrCb analog input. If input is ADV7842_MODE_RGB and RGB quantization range is set to V4L2_DV_RGB_RANGE_AUTO, then video with CEA timings will be received as RGB. For ADV7842_MODE_COMP, automatic CSC mode will be selected. See table 48 on page 281 in "ADV7842 Hardware Manual, Rev. 0, January 2011" for details. Make sure that when switching inputs the RGB quantization range is updated as well. Also updated the platform_data in ezkit to ensure that what was the old default value is now explicitly specified, so the behavior for that board is unchanged. Signed-off-by: Mats Randgaard <matrandg@cisco.com> Signed-off-by: Martin Bugge <marbugge@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
| * | | | | [media] si4713: move supply list to si4713_platform_dataDinesh Ram2013-12-181-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The supply list is needed by the platform driver, but not by the usb driver. So this information belongs to the platform data and should not be hardcoded in the subdevice driver. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Eduardo Valentin <edubezval@gmail.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
| * | | | | [media] doc: no singingKees Cook2013-12-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Stop that, stop that! You're not going to do a song while I'm here. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
* | | | | | Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds2014-01-313-22/+46
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core debug changes from Ingo Molnar: "This contains mostly kernel debugging related updates: - make hung_task detection more configurable to distros - add final bits for x86 UV NMI debugging, with related KGDB changes - update the mailing-list of MAINTAINERS entries I'm involved with" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hung_task: Display every hung task warning sysctl: Add neg_one as a standard constraint x86/uv/nmi, kgdb/kdb: Fix UV NMI handler when KDB not configured x86/uv/nmi: Fix Sparse warnings kgdb/kdb: Fix no KDB config problem MAINTAINERS: Restore "L: linux-kernel@vger.kernel.org" entries
| * | | | | | x86/uv/nmi, kgdb/kdb: Fix UV NMI handler when KDB not configuredMike Travis2014-01-251-14/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix UV call into kgdb to depend only on whether KGDB is defined and not both KGDB and KDB. This allows the power nmi command to use the gdb remote connection if enabled. Note new action of 'kgdb' needs to be set as well to indicate user wants to wait for gdb to be connected. If it's set to 'kdb' then an error message is displayed if KDB is not configured. Also note that if both KGDB and KDB are enabled, then the action of 'kgdb' or 'kdb' has no affect on which is used. See the KGDB documentation for further information. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Hedi Berriche <hedi@sgi.com> Cc: Russ Anderson <rja@sgi.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Link: http://lkml.kernel.org/r/20140114162551.635540667@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 20:51:39 +0000