summaryrefslogtreecommitdiffstats
path: root/block/partitions
Commit message (Collapse)AuthorAgeFilesLines
* block: fix busy device checking in blk_drop_partitions againChristoph Hellwig2020-04-101-1/+1
| | | | | | | | | | | The previous fix had an off by one in the bd_openers checking, counting the callers blkdev_get. Fixes: d3ef5536274f ("block: fix busy device checking in blk_drop_partitions") Reported-by: Qian Cai <cai@lca.pw> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Qian Cai <cai@lca.pw> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block: fix busy device checking in blk_drop_partitionsChristoph Hellwig2020-04-071-1/+1
| | | | | | | | | | | bd_super is only set by get_tree_bdev and mount_bdev, and thus not by other openers like btrfs or the XFS realtime and log devices, as well as block devices directly opened from user space. Check bd_openers instead. Fixes: 77032ca66f86 ("Return EBUSY from BLKRRPART for mounted whole-dev fs") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Merge branch 'efi-core-for-linus' of ↵Linus Torvalds2020-03-302-10/+27
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI updates from Ingo Molnar: "The EFI changes in this cycle are much larger than usual, for two (positive) reasons: - The GRUB project is showing signs of life again, resulting in the introduction of the generic Linux/UEFI boot protocol, instead of x86 specific hacks which are increasingly difficult to maintain. There's hope that all future extensions will now go through that boot protocol. - Preparatory work for RISC-V EFI support. The main changes are: - Boot time GDT handling changes - Simplify handling of EFI properties table on arm64 - Generic EFI stub cleanups, to improve command line handling, file I/O, memory allocation, etc. - Introduce a generic initrd loading method based on calling back into the firmware, instead of relying on the x86 EFI handover protocol or device tree. - Introduce a mixed mode boot method that does not rely on the x86 EFI handover protocol either, and could potentially be adopted by other architectures (if another one ever surfaces where one execution mode is a superset of another) - Clean up the contents of 'struct efi', and move out everything that doesn't need to be stored there. - Incorporate support for UEFI spec v2.8A changes that permit firmware implementations to return EFI_UNSUPPORTED from UEFI runtime services at OS runtime, and expose a mask of which ones are supported or unsupported via a configuration table. - Partial fix for the lack of by-VA cache maintenance in the decompressor on 32-bit ARM. - Changes to load device firmware from EFI boot service memory regions - Various documentation updates and minor code cleanups and fixes" * 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits) efi/libstub/arm: Fix spurious message that an initrd was loaded efi/libstub/arm64: Avoid image_base value from efi_loaded_image partitions/efi: Fix partition name parsing in GUID partition entry efi/x86: Fix cast of image argument efi/libstub/x86: Use ULONG_MAX as upper bound for all allocations efi: Fix a mistype in comments mentioning efivar_entry_iter_begin() efi/libstub: Avoid linking libstub/lib-ksyms.o into vmlinux efi/x86: Preserve %ebx correctly in efi_set_virtual_address_map() efi/x86: Ignore the memory attributes table on i386 efi/x86: Don't relocate the kernel unless necessary efi/x86: Remove extra headroom for setup block efi/x86: Add kernel preferred address to PE header efi/x86: Decompress at start of PE image load address x86/boot/compressed/32: Save the output address instead of recalculating it efi/libstub/x86: Deal with exit() boot service returning x86/boot: Use unsigned comparison for addresses efi/x86: Avoid using code32_start efi/x86: Make efi32_pe_entry() more readable efi/x86: Respect 32-bit ABI in efi32_pe_entry() efi/x86: Annotate the LOADED_IMAGE_PROTOCOL_GUID with SYM_DATA ...
| * partitions/efi: Fix partition name parsing in GUID partition entryNikolai Merinov2020-03-082-10/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GUID partition entry defined to have a partition name as 36 UTF-16LE code units. This means that on big-endian platforms ASCII symbols would be read with 0xXX00 efi_char16_t character code. In order to correctly extract ASCII characters from a partition name field we should be converted from 16LE to CPU architecture. The problem exists on all big endian platforms. [ mingo: Minor edits. ] Fixes: eec7ecfede74 ("genhd, efi: add efi partition metadata to hd_structs") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nikolai Merinov <n.merinov@inango-systems.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200308080859.21568-29-ardb@kernel.org Link: https://lore.kernel.org/r/797777312.1324734.1582544319435.JavaMail.zimbra@inango-systems.com/
* | block: move block layer internals out of include/linux/genhd.hChristoph Hellwig2020-03-252-1/+1
| | | | | | | | | | | | | | None of this needs to be exposed to drivers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | block: merge partition-generic.c and check.cChristoph Hellwig2020-03-244-186/+660
| | | | | | | | | | | | | | | | | | Merge block/partition-generic.c and block/partitions/check.c into a single block/partitions/core.c as the content is closely related and both files are tiny. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | block: move the various x86 Unix label formats out of genhd.hChristoph Hellwig2020-03-241-0/+125
| | | | | | | | | | | | | | | | All these are just used in block/partitions/msdos.c, so move them out of the genhd.h driver included by every driver. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | partitions/msdos: remove LINUX_SWAP_PARTITIONChristoph Hellwig2020-03-241-6/+12
| | | | | | | | | | | | | | | | Just always use NEW_SOLARIS_X86_PARTITION and explain the situation, as that is less confusing than two names for a single value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | block: move the *_PARTITION enum out of genhd.hChristoph Hellwig2020-03-242-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The enum containing the *_PARTITION symbolic names is only relevant for the partition parser. More specifically most values are MSDOS partition table system indicators and thus should go straight into msdos.c. One value is only used by the sun partition parser, and the sun and sgi partition parsers use the same value as the x86 Linux RAID indicator to also indicate RAID autodetection. Duplicate them in sun.c and sgi.c given that the different partition types use entirely different values otherwise. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | block: move struct partition out of genhd.hChristoph Hellwig2020-03-243-25/+17
| | | | | | | | | | | | | | | | | | | | | | | | struct partition is the on-disk format of a MSDOS partition table entry. Move it out of genhd.h into a new msdos_partition.h header and give it a msdos_ prefix to avoid confusion. Also move the magic number from block/partitions/msdos.h to the new header so that it can be used by the SCSI drivers looking at the DOS partition tables. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | block: remove block/partitions/sun.hChristoph Hellwig2020-03-242-9/+3
| | | | | | | | | | | | | | Just move the two defines to block/partitions/sun.c. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | block: remove block/partitions/sgi.hChristoph Hellwig2020-03-242-9/+2
| | | | | | | | | | | | | | Just move the single define to block/partitions/sgi.c. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | block: remove block/partitions/osf.hChristoph Hellwig2020-03-242-8/+1
| | | | | | | | | | | | | | Just move the single define to block/partitions/osf.c. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | block: remove block/partitions/karma.hChristoph Hellwig2020-03-242-7/+2
| | | | | | | | | | | | | | Just move the single define to block/partitions/karma.c. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | block: declare all partition detection routines in check.hChristoph Hellwig2020-03-2426-75/+22
| | | | | | | | | | | | | | | | | | There is no good reason to include one header per partition type in core.c. Instead move the prototypes for the detection routins to check.h, and remove all now empty headers in block/partitions/. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | block: remove warn_no_partChristoph Hellwig2020-03-243-14/+6
| | | | | | | | | | | | | | | | The warn_no_part is initialized to 1 and never changed. Remove it and execute the code keyed off from it unconditionally. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | block: unexport read_dev_sector and put_dev_sectorChristoph Hellwig2020-03-241-7/+7
|/ | | | | | | | | | read_dev_sector and put_dev_sector are now only used by the partition parsing code. Remove the export for read_dev_sector and merge it into the only caller. Clean the mess up a bit by using goto labels and the SECTOR_SHIFT constant. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* partitions/ldm: fix spelling mistake "to" -> "too"Colin Ian King2020-01-231-1/+1
| | | | | | | There is a spelling mistake in a ldm_error message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* docs: admin-guide: add a series of orphaned documentsMauro Carvalho Chehab2019-07-151-1/+1
| | | | | | | | | | | There are lots of documents that belong to the admin-guide but are on random places (most under Documentation root dir). Move them to the admin guide. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
* docs: block: convert to ReSTMauro Carvalho Chehab2019-07-151-1/+1
| | | | | | | | | | | Rename the block documentation files to ReST, add an index for them and adjust in order to produce a nice html output via the Sphinx build system. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* block/partitions/ldm: Convert a kernel-doc header into a non-kernel-doc headerBart Van Assche2019-05-311-1/+1
| | | | | | | | | This patch avoids that the kernel-doc tool warns about this function header when building with W=1. Reviewed-by: Chaitanya Kulkarni <chiatanya.kulkarni@wdc.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block: add SPDX tags to block layer files missing licensing informationChristoph Hellwig2019-04-3010-0/+10
| | | | | | | | | Various block layer files do not have any licensing information at all. Add SPDX tags for the default kernel GPLv2 license to those. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block: switch all files cleared marked as GPLv2 or later to SPDX tagsChristoph Hellwig2019-04-304-60/+4
| | | | | | | | | All these files have some form of the usual GPLv2 or later boilerplate. Switch them to use SPDX tags instead. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block: switch all files cleared marked as GPLv2 to SPDX tagsChristoph Hellwig2019-04-301-6/+1
| | | | | | | | | All these files have some form of the usual GPLv2 boilerplate. Switch them to use SPDX tags instead. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* partitions/aix: append null character to print data from diskMauricio Faria de Oliveira2018-07-271-2/+6
| | | | | | | | | | | | | | Even if properly initialized, the lvname array (i.e., strings) is read from disk, and might contain corrupt data (e.g., lack the null terminating character for strings). So, make sure the partition name string used in pr_warn() has the null terminating character. Fixes: 6ceea22bbbc8 ("partitions: add aix lvm partition support files") Suggested-by: Daniel J. Axtens <daniel.axtens@canonical.com> Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* partitions/aix: fix usage of uninitialized lv_info and lvname structuresMauricio Faria de Oliveira2018-07-271-2/+3
| | | | | | | | | | | | | | | | | | | | | | The if-block that sets a successful return value in aix_partition() uses 'lvip[].pps_per_lv' and 'n[].name' potentially uninitialized. For example, if 'numlvs' is zero or alloc_lvn() fails, neither is initialized, but are used anyway if alloc_pvd() succeeds after it. So, make the alloc_pvd() call conditional on their initialization. This has been hit when attaching an apparently corrupted/stressed AIX LUN, misleading the kernel to pr_warn() invalid data and hang. [...] partition (null) (11 pp's found) is not contiguous [...] partition (null) (2 pp's found) is not contiguous [...] partition (null) (3 pp's found) is not contiguous [...] partition (null) (64 pp's found) is not contiguous Fixes: 6ceea22bbbc8 ("partitions: add aix lvm partition support files") Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* partitions/ldm: remove redundant pointer dgrpColin Ian King2018-07-091-3/+0
| | | | | | | | | | | Pointer dgrp is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'dgrp' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* treewide: Use array_size() in vzalloc()Kees Cook2018-06-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
* treewide: kmalloc() -> kmalloc_array()Kees Cook2018-06-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
* block: add verifier for cmdline partitionWang YanQing2018-06-051-0/+57
| | | | | | | | | | | | | | | | | I meet strange filesystem corruption issue recently, the reason is there are overlaps partitions in cmdline partition argument. This patch add verifier for cmdline partition, then if there are overlaps partitions, cmdline_partition will log a warning. We don't treat overlaps partition as a error: " Caizhiyong <caizhiyong@hisilicon.com> said: Partition overlap was intentionally designed in this cmdline partition. reference http://lists.infradead.org/pipermail/linux-mtd/2013-August/048092.html " Signed-off-by: Wang YanQing <udknight@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* partitions/msdos: Unable to mount UFS 44bsd partitionsRichard Narron2018-01-101-1/+3
| | | | | | | | | | | | | | UFS partitions from newer versions of FreeBSD 10 and 11 use relative addressing for their subpartitions. But older versions of FreeBSD still use absolute addressing just like OpenBSD and NetBSD. Instead of simply testing for a FreeBSD partition, the code needs to also test if the starting offset of the C subpartition is zero. https://bugzilla.kernel.org/show_bug.cgi?id=197733 Signed-off-by: Richard Narron <comet.berkeley@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-0221-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* partitions/ldm: switch to use uuid_tChristoph Hellwig2017-06-052-9/+7
| | | | | | | | And the uuid helpers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
* partitions/msdos: FreeBSD UFS2 file systems are not recognizedRichard2017-05-231-0/+2
| | | | | | | | | | | | | | | | | | | | | The code in block/partitions/msdos.c recognizes FreeBSD, OpenBSD and NetBSD partitions and does a reasonable job picking out OpenBSD and NetBSD UFS subpartitions. But for FreeBSD the subpartitions are always "bad". Kernel: <bsd:bad subpartition - ignored Though all 3 of these BSD systems use UFS as a file system, only FreeBSD uses relative start addresses in the subpartition declarations. The following patch fixes this for FreeBSD partitions and leaves the code for OpenBSD and NetBSD intact: Signed-off-by: Richard Narron <comet.berkeley@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
* partitions/efi: Fix integer overflow in GPT size calculationAlden Tondettar2017-01-171-5/+12
| | | | | | | | | | | | | | | | | | | | If a GUID Partition Table claims to have more than 2**25 entries, the calculation of the partition table size in alloc_read_gpt_entries() will overflow a 32-bit integer and not enough space will be allocated for the table. Nothing seems to get written out of bounds, but later efi_partition() will read up to 32768 bytes from a 128 byte buffer, possibly OOPSing or exposing information to /proc/partitions and uevents. The problem exists on both 64-bit and 32-bit platforms. Fix the overflow and also print a meaningful debug message if the table size is too large. Signed-off-by: Alden Tondettar <alden.tondettar@gmail.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Jens Axboe <axboe@fb.com>
* Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds2016-12-241-1/+1
| | | | | | | | | | | | | This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* block: atari: Return early for unsupported sector sizeGabriel Krisman Bertazi2016-07-131-0/+7
| | | | | | | | | | | | | | | | | | | | | | | For 4K LBA or very large disks, atari_partition can easily get tricked into thinking it has found an Atari partition table. Depending on the data in the disk, it ends up creating partitions with awkward lengths. We saw logs like this while playing with fio. [5.625867] nvme2n1: AHDI p2 [5.625872] nvme2n1: p2 size 2910030523 extends beyond EOD, truncated People has had issues with misinterpreted AHDI partition tables for a long time, see this BSD thread from 1995, for example. https://mail-index.netbsd.org/port-atari/1995/11/19/0001.html Since the atari partition, according to the spec, doesn't even support sector sizes with more than 512, a quick sanity check is reasonable to just bail out early, before even attempting to read sector 0. Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* block/partitions/ldm.c: use generic UUID libraryAndy Shevchenko2016-05-201-56/+4
| | | | | | | | | | Instead of opencoding let's use generic UUID library functions here. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: "Richard Russon (FlatCap)" <ldm@flatcap.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* treewide: Fix typos in printkMasanari Iida2016-04-181-2/+2
| | | | | | | | | This patch fix spelling typos found in printk within various part of the kernel sources. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* mac: validate mac_partition is within sectorKees Cook2015-11-201-3/+7
| | | | | | | | | | If md->signature == MAC_DRIVER_MAGIC and md->block_size == 1023, a single 512 byte sector would be read (secsize / 512). However the partition structure would be located past the end of the buffer (secsize % 512). Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
* Merge branch 'for-3.20/core' of git://git.kernel.dk/linux-blockLinus Torvalds2015-02-121-6/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull core block IO changes from Jens Axboe: "This contains: - A series from Christoph that cleans up and refactors various parts of the REQ_BLOCK_PC handling. Contributions in that series from Dongsu Park and Kent Overstreet as well. - CFQ: - A bug fix for cfq for realtime IO scheduling from Jeff Moyer. - A stable patch fixing a potential crash in CFQ in OOM situations. From Konstantin Khlebnikov. - blk-mq: - Add support for tag allocation policies, from Shaohua. This is a prep patch enabling libata (and other SCSI parts) to use the blk-mq tagging, instead of rolling their own. - Various little tweaks from Keith and Mike, in preparation for DM blk-mq support. - Minor little fixes or tweaks from me. - A double free error fix from Tony Battersby. - The partition 4k issue fixes from Matthew and Boaz. - Add support for zero+unprovision for blkdev_issue_zeroout() from Martin" * 'for-3.20/core' of git://git.kernel.dk/linux-block: (27 commits) block: remove unused function blk_bio_map_sg block: handle the null_mapped flag correctly in blk_rq_map_user_iov blk-mq: fix double-free in error path block: prevent request-to-request merging with gaps if not allowed blk-mq: make blk_mq_run_queues() static dm: fix multipath regression due to initializing wrong request cfq-iosched: handle failure of cfq group allocation block: Quiesce zeroout wrapper block: rewrite and split __bio_copy_iov() block: merge __bio_map_user_iov into bio_map_user_iov block: merge __bio_map_kern into bio_map_kern block: pass iov_iter to the BLOCK_PC mapping functions block: add a helper to free bio bounce buffer pages block: use blk_rq_map_user_iov to implement blk_rq_map_user block: simplify bio_map_kern block: mark blk-mq devices as stackable block: keep established cmd_flags when cloning into a blk-mq request block: add blk-mq support to blk_insert_cloned_request() block: require blk_rq_prep_clone() be given an initialized clone request blk-mq: add tag allocation policy ...
| * block: Remove annoying "unknown partition table" messageBoaz Harrosh2015-01-221-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | As Christoph put it: Can we just get rid of the warnings? It's fairly annoying as devices without partitions are perfectly fine and very useful. Me too I see this message every VM boot for ages on all my devices. Would love to just remove it. For me a partition-table is only needed for a booting BIOS, grub, and stuff. CC: Christoph Hellwig <hch@infradead.org> Signed-off-by: Boaz Harrosh <boaz@plexistor.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* | efi: Rename efi_guid_unparse to efi_guid_to_strBorislav Petkov2015-01-071-1/+1
|/ | | | | | | Call it what it does - "unparse" is plain-misleading. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
* block: Replace strnicmp with strncasecmpRasmus Villemoes2014-09-271-4/+4
| | | | | | | | | | | | | | | | The kernel used to contain two functions for length-delimited, case-insensitive string comparison, strnicmp with correct semantics and a slightly buggy strncasecmp. The latter is the POSIX name, so strnicmp was renamed to strncasecmp, and strnicmp made into a wrapper for the new strncasecmp to avoid breaking existing users. To allow the compat wrapper strnicmp to be removed at some point in the future, and to avoid the extra indirection cost, do s/strnicmp/strncasecmp/g. Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Jens Axboe <axboe@fb.com>
* partitions: aix.c: off by one bugDan Carpenter2014-08-051-1/+1
| | | | | | | | | | The lvip[] array has "state->limit" elements so the condition here should be >= instead of >. Fixes: 6ceea22bbbc8 ('partitions: add aix lvm partition support files') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Jens Axboe <axboe@fb.com>
* block/partitions/efi.c: kerneldoc fixingFabian Frederick2014-07-011-22/+24
| | | | | | | | | | Adding function documentation and fixing kerneldoc warnings ('field: description' uniformization). Cc: Davidlohr Bueso <davidlohr@hp.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jens Axboe <axboe@fb.com>
* block/partitions/msdos.c: code clean-upFabian Frederick2014-07-011-5/+8
| | | | | | | | | | | | checkpatch fixing: WARNING: Missing a blank line after declarations WARNING: space prohibited between function name and open parenthesis '(' ERROR: spaces required around that '<' (ctx:VxV) Cc: Jens Axboe <axboe@kernel.dk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jens Axboe <axboe@fb.com>
* block/partitions/amiga.c: replace nolevel printk by pr_errFabian Frederick2014-07-011-5/+7
| | | | | | | | | Also add no prefix pr_fmt to avoid any future default format update Cc: Jens Axboe <axboe@kernel.dk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jens Axboe <axboe@fb.com>
* block/partitions/aix.c: replace count*size kzalloc by kcallocFabian Frederick2014-07-011-1/+1
| | | | | | | | | kcalloc manages count*sizeof overflow. Cc: Jens Axboe <axboe@kernel.dk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jens Axboe <axboe@fb.com>
* block: Use macros from compiler.h instead of __attribute__((...))Gideon Israel Dsouza2014-02-183-6/+10
| | | | | | | | | | To increase compiler portability there are several macros defined in <linux/compiler.h> for various gcc __attribute((..)) constructs. I've made sure gcc these specific were replaced with the right macro and an #include <linux/compiler.h> was placed where needed. Signed-off-by: Gideon Israel Dsouza <gidisrael@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 14:43:48 +0000