summaryrefslogtreecommitdiffstats
path: root/drivers/clk/qcom
Commit message (Collapse)AuthorAgeFilesLines
...
* clk: qcom: camcc-sm8250: Fix topology around titan_top power domainVladimir Zapolskiy2022-06-301-0/+4
| | | | | | | | | | | | On SM8250 two found VFE GDSC power domains shall not be operated, if titan top is turned off, thus the former power domains will be set as subdomains by a GDSC registration routine. Fixes: 5d66ca79b58c ("clk: qcom: Add camera clock controller driver for SM8250") Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220519214133.1728979-3-vladimir.zapolskiy@linaro.org
* clk: qcom: camcc-sdm845: Fix topology around titan_top power domainVladimir Zapolskiy2022-06-301-0/+4
| | | | | | | | | | | | On SDM845 two found VFE GDSC power domains shall not be operated, if titan top is turned off, thus the former power domains will be set as subdomains by a GDSC registration routine. Fixes: 78412c262004 ("clk: qcom: Add camera clock controller driver for SDM845") Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220519214133.1728979-2-vladimir.zapolskiy@linaro.org
* clk: qcom: ipq8074: dont disable gcc_sleep_clk_srcRobert Marko2022-06-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Once the usb sleep clocks are disabled, clock framework is trying to disable the sleep clock source also. However, it seems that it cannot be disabled and trying to do so produces: [ 245.436390] ------------[ cut here ]------------ [ 245.441233] gcc_sleep_clk_src status stuck at 'on' [ 245.441254] WARNING: CPU: 2 PID: 223 at clk_branch_wait+0x130/0x140 [ 245.450435] Modules linked in: xhci_plat_hcd xhci_hcd dwc3 dwc3_qcom leds_gpio [ 245.456601] CPU: 2 PID: 223 Comm: sh Not tainted 5.18.0-rc4 #215 [ 245.463889] Hardware name: Xiaomi AX9000 (DT) [ 245.470050] pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 245.474307] pc : clk_branch_wait+0x130/0x140 [ 245.481073] lr : clk_branch_wait+0x130/0x140 [ 245.485588] sp : ffffffc009f2bad0 [ 245.489838] x29: ffffffc009f2bad0 x28: ffffff8003e6c800 x27: 0000000000000000 [ 245.493057] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff800226ef20 [ 245.500175] x23: ffffffc0089ff550 x22: 0000000000000000 x21: ffffffc008476ad0 [ 245.507294] x20: 0000000000000000 x19: ffffffc00965ac70 x18: fffffffffffc51a7 [ 245.514413] x17: 68702e3030303837 x16: 3a6d726f6674616c x15: ffffffc089f2b777 [ 245.521531] x14: ffffffc0095c9d18 x13: 0000000000000129 x12: 0000000000000129 [ 245.528649] x11: 00000000ffffffea x10: ffffffc009621d18 x9 : 0000000000000001 [ 245.535767] x8 : 0000000000000001 x7 : 0000000000017fe8 x6 : 0000000000000001 [ 245.542885] x5 : ffffff803fdca6d8 x4 : 0000000000000000 x3 : 0000000000000027 [ 245.550002] x2 : 0000000000000027 x1 : 0000000000000023 x0 : 0000000000000026 [ 245.557122] Call trace: [ 245.564229] clk_branch_wait+0x130/0x140 [ 245.566490] clk_branch2_disable+0x2c/0x40 [ 245.570656] clk_core_disable+0x60/0xb0 [ 245.574561] clk_core_disable+0x68/0xb0 [ 245.578293] clk_disable+0x30/0x50 [ 245.582113] dwc3_qcom_remove+0x60/0xc0 [dwc3_qcom] [ 245.585588] platform_remove+0x28/0x60 [ 245.590361] device_remove+0x4c/0x80 [ 245.594179] device_release_driver_internal+0x1dc/0x230 [ 245.597914] device_driver_detach+0x18/0x30 [ 245.602861] unbind_store+0xec/0x110 [ 245.607027] drv_attr_store+0x24/0x40 [ 245.610847] sysfs_kf_write+0x44/0x60 [ 245.614405] kernfs_fop_write_iter+0x128/0x1c0 [ 245.618052] new_sync_write+0xc0/0x130 [ 245.622391] vfs_write+0x1d4/0x2a0 [ 245.626123] ksys_write+0x58/0xe0 [ 245.629508] __arm64_sys_write+0x1c/0x30 [ 245.632895] invoke_syscall.constprop.0+0x5c/0x110 [ 245.636890] do_el0_svc+0xa0/0x150 [ 245.641488] el0_svc+0x18/0x60 [ 245.644872] el0t_64_sync_handler+0xa4/0x130 [ 245.647914] el0t_64_sync+0x174/0x178 [ 245.652340] ---[ end trace 0000000000000000 ]--- So, add CLK_IS_CRITICAL flag to the clock so that the kernel won't try to disable the sleep clock. Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220515210048.483898-10-robimarko@gmail.com
* clk: qcom: ipq8074: add USB GDSCsRobert Marko2022-06-302-0/+25
| | | | | | | | Add GDSC-s for each of the two USB controllers built-in the IPQ8074. Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220515210048.483898-9-robimarko@gmail.com
* clk: qcom: ipq8074: set BRANCH_HALT_DELAY flag for UBI clocksRobert Marko2022-06-301-0/+10
| | | | | | | | | | | | | | | Currently, attempting to enable the UBI clocks will cause the stuck at off warning to be printed and clk_enable will fail. [ 14.936694] gcc_ubi1_ahb_clk status stuck at 'off' Downstream 5.4 QCA kernel has fixed this by seting the BRANCH_HALT_DELAY flag on UBI clocks, so lets do the same. Fixes: 5736294aef83 ("clk: qcom: ipq8074: add NSS clocks") Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220515210048.483898-6-robimarko@gmail.com
* clk: qcom: ipq8074: add PPE crypto clockRobert Marko2022-06-301-0/+19
| | | | | | | | | | | The built-in PPE engine has a dedicated clock for the EIP-197 crypto engine. So, since the required clock currently missing add support for it. Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220515210048.483898-5-robimarko@gmail.com
* clk: qcom: ipq8074: fix NSS port frequency tablesRobert Marko2022-06-301-0/+8
| | | | | | | | | | | | | | NSS port 5 and 6 frequency tables are currently broken and are causing a wide ranges of issue like 1G not working at all on port 6 or port 5 being clocked with 312 instead of 125 MHz as UNIPHY1 gets selected. So, update the frequency tables with the ones from the downstream QCA 5.4 based kernel which has already fixed this. Fixes: 7117a51ed303 ("clk: qcom: ipq8074: add NSS ethernet port clocks") Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220515210048.483898-3-robimarko@gmail.com
* clk: qcom: ipq8074: SW workaround for UBI32 PLL lockRobert Marko2022-06-301-0/+3
| | | | | | | | | | | | | | | | UBI32 Huayra PLL fails to lock in 5 us in some SoC silicon and thus it will cause the wait_for_pll() to timeout and thus return the error indicating that the PLL failed to lock. This is bug in Huayra PLL HW for which SW workaround is to set bit 26 of TEST_CTL register. This is ported from the QCA 5.4 based downstream kernel. Fixes: b8e7e519625f ("clk: qcom: ipq8074: add remaining PLL’s") Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220515210048.483898-2-robimarko@gmail.com
* clk: qcom: ipq8074: fix NSS core PLL-sRobert Marko2022-06-301-1/+38
| | | | | | | | | | | | | | | | | | Like in IPQ6018 the NSS related Alpha PLL-s require initial configuration to work. So, obtain the regmap that is required for the Alpha PLL configuration and thus utilize the qcom_cc_really_probe() as we already have the regmap. Then utilize the Alpha PLL configs from the downstream QCA 5.4 based kernel to configure them. This fixes the UBI32 and NSS crypto PLL-s failing to get enabled by the kernel. Fixes: b8e7e519625f ("clk: qcom: ipq8074: add remaining PLL’s") Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220515210048.483898-1-robimarko@gmail.com
* clk: qcom: gcc-msm8939: Point MM peripherals to system_mm_noc clockBryan O'Donoghue2022-06-291-8/+8
| | | | | | | | | | | | | | | | | Qcom docs indciate the following peripherals operating from System NOC MM not from System NOC clocks. - MDP - VFE - JPEGe - Venus Switch over the relevant parent pointers. Fixes: 1664014e4679 ("clk: qcom: gcc-msm8939: Add MSM8939 Generic Clock Controller") Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220504163835.40130-5-bryan.odonoghue@linaro.org
* clk: qcom: gcc-msm8939: Add missing system_mm_noc_bfdcd_clk_srcBryan O'Donoghue2022-06-291-0/+13
| | | | | | | | | | | | | | | | The msm8939 has an additional higher operating point for the multi-media peripherals. The higher throughput MM componets operate off of the system-mm noc not the system noc. system_mm_noc_bfdcd_clk_src is the source clock for the higher frequency capable system noc mm. Maximum frequency for the MM SNOC is 400 MHz. Fixes: 1664014e4679 ("clk: qcom: gcc-msm8939: Add MSM8939 Generic Clock Controller") Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220504163835.40130-4-bryan.odonoghue@linaro.org
* clk: qcom: gcc-msm8939: Fix bimc_ddr_clk_src rcgr base addressBryan O'Donoghue2022-06-291-1/+1
| | | | | | | | | | Reviewing qcom docs for the 8939 we can see the command rcgr is pointing to the wrong address. bimc_ddr_clk_src_rcgr is @ 0x01832024 not 0x01832004. Fixes: 1664014e4679 ("clk: qcom: gcc-msm8939: Add MSM8939 Generic Clock Controller") Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220504163835.40130-3-bryan.odonoghue@linaro.org
* clk: qcom: gcc-sc8280xp: use phy-mux clock for PCIeJohan Hovold2022-06-291-90/+31
| | | | | | | | | | | | | | | Use the new phy-mux clock implementation for the PCIe pipe clock muxes so that the pipe clock source is set to the QMP PHY PLL when the downstream pipe clock is enabled and restored to the always-on XO when it is again disabled. This is needed to prevent the corresponding GDSC from hanging when enabling or disabling the PCIe power domain, something which requires a ticking source. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220628085707.16214-1-johan+linaro@kernel.org
* clk: qcom: clk-krait: add apq/ipq8064 errata workaroundAnsuel Smith2022-06-273-0/+25
| | | | | | | | | | | | Add apq/ipq8064 errata workaround where the sec_src clock gating needs to be disabled during switching. krait-cc compatible is not enough to handle this and limit this workaround to apq/ipq8064. We check machine compatible to handle this. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220430054458.31321-4-ansuelsmth@gmail.com
* clk: qcom: clk-krait: unlock spin after mux completionAnsuel Smith2022-06-271-1/+6
| | | | | | | | | | | Unlock spinlock after the mux switch is completed to prevent any corner case of mux request while the switch still needs to be done. Fixes: 4d7dc77babfe ("clk: qcom: Add support for Krait clocks") Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220430054458.31321-3-ansuelsmth@gmail.com
* clk: qcom: clk-hfpll: use poll_timeout macroAnsuel Smith2022-06-271-6/+9
| | | | | | | | | | Use regmap_read_poll_timeout macro instead of do-while structure to tidy things up. Also set a timeout to prevent any sort of system stall. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220430054458.31321-2-ansuelsmth@gmail.com
* clk: qcom: gcc-sm6350: Drop extra semicolonLi kunyu2022-06-271-1/+1
| | | | | | | | | Drop the extra semicolon after qcom_cc_really_probe() Signed-off-by: Li kunyu <kunyu@nfschina.com> [bjorn: Rewrote commit message] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220627020500.135125-1-kunyu@nfschina.com
* clk: qcom: gcc-sc8280xp: use collapse-voting for PCIe GDSCsJohan Hovold2022-06-251-0/+21
| | | | | | | | | | | | The PCIe GDSCs can be shared with other masters and should use the APCS collapse-vote register when updating the power state. This is specifically also needed to be able to disable power domains that have been enabled by boot firmware using the vote register. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220520100948.19622-4-johan+linaro@kernel.org
* clk: qcom: gdsc: add support for collapse-vote registersJohan Hovold2022-06-252-2/+11
| | | | | | | | | | | | Recent Qualcomm platforms have APCS collapse-vote registers that allow for sharing GDSCs with other masters (e.g. LPASS). Add support for using such vote registers instead of the control register when updating the GDSC power state. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220520100948.19622-3-johan+linaro@kernel.org
* clk: qcom: gdsc: add collapse-bit helperJohan Hovold2022-06-251-6/+17
| | | | | | | | | | | | | Add a helper for updating the SW_COLLAPSE bit during initialisation and state updates. Note that the update during initialisation was relying on the SW_COLLAPSE bit not having been set earlier rather than passing in zero explicitly to clear the collapse vote. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220520100948.19622-2-johan+linaro@kernel.org
* clk: qcom: camcc-sm8250: Fix halt on boot by reducing driver's init levelVladimir Zapolskiy2022-06-251-11/+1
| | | | | | | | | | | | | | | | | Access to I/O of SM8250 camera clock controller IP depends on enabled GCC_CAMERA_AHB_CLK clock supplied by global clock controller, the latter one is inited on subsys level, so, to satisfy the dependency, it would make sense to deprive the init level of camcc-sm8250 driver. If both drivers are compiled as built-in, there is a change that a board won't boot up due to a race, which happens on the same init level. Fixes: 5d66ca79b58c ("clk: qcom: Add camera clock controller driver for SM8250") Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220518103554.949511-1-vladimir.zapolskiy@linaro.org
* Merge tag '20220608105238.2973600-1-dmitry.baryshkov@linaro.org' into ↵Bjorn Andersson2022-06-255-70/+124
|\ | | | | | | | | | | | | | | | | clk-for-5.20 v5.19-rc1 + 20220608105238.2973600-2-dmitry.baryshkov@linaro.org + 20220608105238.2973600-3-dmitry.baryshkov@linaro.org + 20220608105238.2973600-4-dmitry.baryshkov@linaro.org
| * clk: qcom: gcc-sc7280: use new clk_regmap_phy_mux_ops for PCIe pipe clocksDmitry Baryshkov2022-06-251-34/+15
| | | | | | | | | | | | | | | | | | | | | | | | Use newly defined clk_regmap_phy_mux_ops for PCIe pipe clocks to let the clock framework automatically park the clock when the clock is switched off and restore the parent when the clock is switched on. Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220608105238.2973600-4-dmitry.baryshkov@linaro.org
| * clk: qcom: gcc-sm8450: use new clk_regmap_phy_mux_ops for PCIe pipe clocksDmitry Baryshkov2022-06-251-36/+13
| | | | | | | | | | | | | | | | | | | | | | | | Use newly defined clk_regmap_phy_mux_ops for PCIe pipe clocks to let the clock framework automatically park the clock when the clock is switched off and restore the parent when the clock is switched on. Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220608105238.2973600-3-dmitry.baryshkov@linaro.org
| * clk: qcom: regmap: add PHY clock source implementationDmitry Baryshkov2022-06-253-0/+96
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On recent Qualcomm platforms the QMP PIPE clocks feed into a set of muxes which must be parked to the "safe" source (bi_tcxo) when corresponding GDSC is turned off and on again. Currently this is handcoded in the PCIe driver by reparenting the gcc_pipe_N_clk_src clock. However the same code sequence should be applied in the pcie-qcom endpoint, USB3 and UFS drivers. Rather than copying this sequence over and over again, follow the example of clk_rcg2_shared_ops and implement this parking in the enable() and disable() clock operations. Supplement the regmap-mux with the new clk_regmap_phy_mux type, which implements such multiplexers as a simple gate clocks. This is possible since each of these multiplexers has just two clock sources: one coming from the PHY and a reference (XO) one. If the clock is running off the from-PHY source, report it as enabled. Report it as disabled otherwise (if it uses reference source). This way the PHY will disable the pipe clock before turning off the GDSC, which in turn would lead to disabling corresponding pipe_clk_src (and thus it being parked to a safe, reference clock source). And vice versa, after enabling the GDSC the PHY will enable the pipe clock, which would cause pipe_clk_src to be switched from a safe source to the working one. Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220608105238.2973600-2-dmitry.baryshkov@linaro.org
* | clk: qcom: mmcc-msm8996: use parent_hws/_data instead of parent_namesDmitry Baryshkov2022-06-251-239/+495
| | | | | | | | | | | | | | | | | | | | | | | | | | Convert the clock driver to specify parent data rather than parent names, to actually bind using 'clock-names' specified in the DTS rather than global clock names. Use parent_hws where possible to refer parent clocks directly, skipping the lookup. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220617122922.769562-6-dmitry.baryshkov@linaro.org
* | clk: qcom: mmcc-msm8996: move clock parent tables downDmitry Baryshkov2022-06-251-182/+182
| | | | | | | | | | | | | | | | | | | | | | Move clock parent tables down, after the MMPLL declrataions, so that we can use gpll hw clock fields in the next commit. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220617122922.769562-5-dmitry.baryshkov@linaro.org
* | clk: qcom: mmcc-msm8996: use ARRAY_SIZE instead of specifying num_parentsDmitry Baryshkov2022-06-251-44/+44
| | | | | | | | | | | | | | | | | | | | | | Use ARRAY_SIZE() instead of manually specifying num_parents. This makes adding/removing entries to/from parent_data easy and errorproof. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220617122922.769562-4-dmitry.baryshkov@linaro.org
* | clk: qcom: rpmh: Add note about sleep/wake state for BCMsStephen Boyd2022-06-251-0/+5
|/ | | | | | | | | | | | | | | The sleep/wake state doesn't need to be set here because of specific RPMh behavior that carries over the active state when sleep/wake state hasn't been modified. Add a note to the code so we aren't tempted to set the sleep/wake states. Cc: Alex Elder <elder@linaro.org> Cc: Taniya Das <quic_tdas@quicinc.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220517190949.2922197-1-swboyd@chromium.org
* Merge tag 'clk-for-linus' of ↵Linus Torvalds2022-05-2710-34/+8943
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "Mainly driver updates this time around. There's a single patch to the core clk framework that simplifies a runtime PM call. Otherwise the majority of the diff falls to a few SoC drivers: Qualcomm, STM32 and MediaTek. Those SoCs gain some new hardware support and what comes along with that is quite a few lines of data and some clk_ops code. Beyond the new hardware support we have the usual pile of driver updates that add missing clks on already supported SoCs or fix up problems like bad clk tree descriptions. It's nice to see that more drivers are moving to clk_hw based APIs too. New Drivers: - Add STM32MP13 RCC driver (Reset Clock Controller) - MediaTek MT8186 SoC clk support - Airoha EN7523 SoC system clocks - Clock driver for exynosautov9 SoC - Renesas R-Car V4H and RZ/V2M SoCs - Renesas RZ/G2UL SoC - LPASS clk driver for Qualcomm sc7280 SoC - GCC clk driver for Qualcomm SC8280XP SoC Updates: - SDCC uses floor clk ops on Qualcomm MSM8976 - Add modem reset and fix RPM clks on Qualcomm MSM8976 - Add the two missing CLKOUT clocks for U8500/DB8500 SoC - Mark some clks critical on Ingenic X1000 - Convert ux500 to clk_hw - Move MediaTek driver to clk_hw provider APIs - Use i2c driver probe_new to avoid id scans - Convert a number of Rockchip dt bindings to YAML - Mark hclk_vo critical on Rockchip rk3568 - Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage - Various cleanups like memory allocation error checks and plugged leaks - Allwinner H6 RTC clock support - Allwinner H616 32 kHz clock support - Add the Universal Flash Storage clock on Renesas R-Car S4-8 - Add I2C, SSIF-2 (sound), USB, CANFD, OSTM (timer), WDT, SPI Multi I/O Bus, RSPI, TSU (thermal), and ADC clocks and resets on Renesas RZ/G2UL - Add display clock support on Renesas RZ/G2L - Add RPC (QSPI/HyperFlash) clocks on Renesas R-Car E3 and D3 - Add 27 MHz phy PLL ref clock on i.MX - Add mcore_booted module parameter to tell kernel M core has already booted for i.MX - Remove snvs clock on i.MX because it was for secure world only - Add dt bindings for i.MX8MN GPT - Add DISP2 pixel clock for i.MX8MP - Add clkout1/2 for i.MX8MP - Fix parent clock of ubs_root_clk for i.MX8MP - Implement better RCG parking on Qualcomm SoCs using the shared RCG clk ops - Kerneldoc fixes - Switch Tegra BPMP to determine_rate clk op - Add a pointer to dt schema for generic clock bindings" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (168 commits) Revert "clk: qcom: regmap-mux: add pipe clk implementation" Revert "clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe clocks" Revert "clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks" clk: bcm: rpi: Use correct order for the parameters of devm_kcalloc() clk: stm32mp13: add safe mux management clk: stm32mp13: add multi mux function clk: stm32mp13: add all STM32MP13 kernel clocks clk: stm32mp13: add all STM32MP13 peripheral clocks clk: stm32mp13: manage secured clocks clk: stm32mp13: add composite clock clk: stm32mp13: add stm32 divider clock clk: stm32mp13: add stm32_gate management clk: stm32mp13: add stm32_mux clock management clk: stm32: Introduce STM32MP13 RCC drivers (Reset Clock Controller) dt-bindings: rcc: stm32: add new compatible for STM32MP13 SoC clk: ti: clkctrl: replace usage of found with dedicated list iterator variable clk: ti: composite: Prefer kcalloc over open coded arithmetic dt-bindings: clock: exynosautov9: correct count of NR_CLK clk: mediatek: mt8173: Switch to clk_hw provider APIs clk: mediatek: Switch to clk_hw provider APIs ...
| * Revert "clk: qcom: regmap-mux: add pipe clk implementation"Dmitry Baryshkov2022-05-232-81/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Johan Hovold has pointed out that there are several deficiencies and a race condition in the regmap_mux_safe ops that were merged. Pipe clocks has been updated to use newer and simpler clk_regmap_phy_mux_ops. Drop the regmap-mux-safe clock ops now. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220521005343.1429642-4-dmitry.baryshkov@linaro.org
| * Revert "clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe ↵Dmitry Baryshkov2022-05-231-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | clocks" Johan Hovold has pointed out that there are several deficiencies and a race condition in the regmap_mux_safe ops that were merged. Revert the commit that switches gcc-sc7280 driver to use regmap_mux_safe. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220521005343.1429642-3-dmitry.baryshkov@linaro.org
| * Revert "clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe ↵Dmitry Baryshkov2022-05-231-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | clocks" Johan Hovold has pointed out that there are several deficiencies and a race condition in the regmap_mux_safe ops that were merged. Revert the commit that switches gcc-sm8450 driver to use regmap_mux_safe. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220521005343.1429642-2-dmitry.baryshkov@linaro.org
| * clk: qcom: rcg2: Cache CFG register updates for parked RCGsBjorn Andersson2022-05-192-27/+101
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As GDSCs are turned on and off some associated clocks are momentarily enabled for house keeping purposes. For this, and similar, purposes the "shared RCGs" will park the RCG on a source clock which is known to be available. When the RCG is parked, a safe clock source will be selected and committed, then the original source would be written back and upon enable the change back to the unparked source would be committed. But starting with SM8350 this fails, as the value in CFG is committed by the GDSC handshake and without a ticking parent the GDSC enablement will time out. This becomes a concrete problem if the runtime supended state of a device includes disabling such rcg's parent clock. As the device attempts to power up the domain again the rcg will fail to enable and hence the GDSC enablement will fail, preventing the device from returning from the suspended state. This can be seen in e.g. the display stack during probe on SM8350. To avoid this problem, the software needs to ensure that the RCG is configured to a active parent clock while it is disabled. This is done by caching the CFG register content while the shared RCG is parked on this safe source. Writes to M, N and D registers are committed as they are requested. New helpers for get_parent() and recalc_rate() are extracted from their previous implementations and __clk_rcg2_configure() is modified to allow it to operate on the cached value. Fixes: 7ef6f11887bd ("clk: qcom: Configure the RCGs to a safe source as needed") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220426212136.1543984-1-bjorn.andersson@linaro.org
| * clk: qcom: add sc8280xp GCC driverBjorn Andersson2022-05-193-0/+7498
| | | | | | | | | | | | | | | | | | | | Add support for the Global Clock Controller found in the Qualcomm SC8280XP platform. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220505025457.1693716-3-bjorn.andersson@linaro.org
| * clk: qcom: gcc-msm8976: Add modem resetAdam Skladowski2022-05-051-0/+1
| | | | | | | | | | | | | | | | Add modem reset, it will be needed during modem bringup. Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220426073048.11509-4-a39.skl@gmail.com
| * clk: qcom: gcc-msm8976: Set floor ops for SDCCAdam Skladowski2022-05-051-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | Just like in case of other SoCs change SDCC1/SDCC2 ops to floor to avoid overclocking controller. This commit only sets SDCC1/SDCC2 which are used for EMMC/SDCARD. Leave SDCC3 because on this platform it's mostly used for WIFI/BT chips, like on Sony Loire familly devices. Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220426073048.11509-2-a39.skl@gmail.com
| * clk: qcom: smd: Update MSM8976 RPM clocks.Adam Skladowski2022-04-281-4/+4
| | | | | | | | | | | | | | | | | | | | | | MSM8976 does not have rpm clock named mmssnoc, instead it's called sysmmnoc, drop define and reuse. While we are at it add XO clock to list. Fixes: 7d61e773c3ed ("clk: qcom: smd: Add support for MSM8976 rpm clocks") Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220426090226.27293-1-a39.skl@gmail.com
| * clk: qcom: gcc-msm8998: add SSC-related clocksMichael Srba2022-04-191-0/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add four clocks which need to be manipulated in order to initialize the AHB bus which exposes the SCC block in the global address space. If a device is known to be configured such that writing to these registers from Linux is not permitted, the 'protected-clocks' device tree property must be used to denote that fact. Signed-off-by: Michael Srba <Michael.Srba@seznam.cz> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220411072156.24451-3-michael.srba@seznam.cz
| * clk: qcom: lpass: Add support for LPASS clock controller for SC7280Taniya Das2022-04-124-0/+1280
| | | | | | | | | | | | | | | | | | | | The Low Power Audio subsystem core and audio clocks are required for Audio client to be able to request for the clocks and power domains. Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220223172248.18877-2-tdas@codeaurora.org
| * clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe clocksDmitry Baryshkov2022-04-121-2/+4
| | | | | | | | | | | | | | | | | | | | | | Use newly defined clk_regmap_mux_safe_ops for PCIe pipe clocks to let the clock framework automatically park the clock when the clock is switched off and restore the parent when the clock is switched on. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220323085010.1753493-4-dmitry.baryshkov@linaro.org
| * clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocksDmitry Baryshkov2022-04-121-2/+4
| | | | | | | | | | | | | | | | | | | | | | Use newly defined clk_regmap_mux_safe_ops for PCIe pipe clocks to let the clock framework automatically park the clock when the clock is switched off and restore the parent when the clock is switched on. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220323085010.1753493-3-dmitry.baryshkov@linaro.org
| * clk: qcom: regmap-mux: add pipe clk implementationDmitry Baryshkov2022-04-122-0/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On recent Qualcomm platforms the QMP PIPE clocks feed into a set of muxes which must be parked to the "safe" source (bi_tcxo) when corresponding GDSC is turned off and on again. Currently this is handcoded in the PCIe driver by reparenting the gcc_pipe_N_clk_src clock. However the same code sequence should be applied in the pcie-qcom endpoint, USB3 and UFS drivers. Rather than copying this sequence over and over again, follow the example of clk_rcg2_shared_ops and implement this parking in the enable() and disable() clock operations. As we are changing the parent behind the back of the clock framework, also implement custom set_parent() and get_parent() operations behaving accroding to the clock framework expectations (cache the new parent if the clock is in disabled state, return cached parent). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220323085010.1753493-2-dmitry.baryshkov@linaro.org
* | clk: qcom: clk-rcg2: fix gfx3d frequency calculationDmitry Baryshkov2022-04-211-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | Since the commit 948fb0969eae ("clk: Always clamp the rounded rate"), the clk_core_determine_round_nolock() would clamp the requested rate between min and max rates from the rate request. Normally these fields would be filled by clk_core_get_boundaries() called from clk_round_rate(). However clk_gfx3d_determine_rate() uses a manually crafted rate request, which did not have these fields filled. Thus the requested frequency would be clamped to 0, resulting in weird frequencies being requested from the hardware. Fix this by filling min_rate and max_rate to the values valid for the respective PLLs (0 and ULONG_MAX). Fixes: 948fb0969eae ("clk: Always clamp the rounded rate") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220419235447.1586192-1-dmitry.baryshkov@linaro.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reported-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* Merge tag 'clk-for-linus' of ↵Linus Torvalds2022-03-3023-890/+4366
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "There's one large change in the core clk framework here. We change how clk_set_rate_range() works so that the frequency is re-evaulated each time the rate is changed. Previously we wouldn't let clk providers see a rate that was different if it was still within the range, which could be bad for power if the clk could run slower when a range expands. Now the clk provider can decide to do something differently when the constraints change. This broke Nvidia's clk driver so we had to wait for the fix for that to bake a little more in -next. The rate range patch series also introduced a kunit suite for the clk framework that we're going to extend in the next release. It already made it easy to find corner cases in the rate range patches so I'm excited to see it cover more clk code and increase our confidence in core framework patches in the future. I also added a kunit test for the basic clk gate code and that work will continue to cover more basic clk types: muxes, dividers, etc. Beyond the core code we have the usual set of clk driver updates and additions. Qualcomm again dominates the diffstat here with lots more SoCs being supported and i.MX follows afer that with a similar number of SoCs gaining clk drivers. Beyond those large additions there's drivers being modernized to use clk_parent_data so we can move away from global string names for all the clks in an SoC. Finally there's lots of little fixes all over the clk drivers for typos, warnings, and missing clks that aren't critical and get batched up waiting for the next merge window to open. Nothing super big stands out in the driver pile. Full details are below. Core: - Make clk_set_rate_range() re-evaluate the limits each time - Introduce various clk_set_rate_range() tests - Add clk_drop_range() to drop a previously set range New Drivers: - i.MXRT1050 clock driver and bindings - i.MX8DXL clock driver and bindings - i.MX93 clock driver and bindings - NCO blocks on Apple SoCs - Audio clks on StarFive JH7100 RISC-V SoC - Add support for the new Renesas RZ/V2L SoC - Qualcomm SDX65 A7 PLL - Qualcomm SM6350 GPU clks - Qualcomm SM6125, SM6350, QCS2290 display clks - Qualcomm MSM8226 multimedia clks Updates: - Kunit tests for clk-gate implementation - Terminate arrays with sentinels and make that clearer - Cleanup SPDX tags - Fix typos in comments - Mark mux table as const in clk-mux - Make the all_lists array const - Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add support for dynamic mode - Clock configuration on Microchip PolarFire SoCs - Free allocations on probe error in Mediatek clk driver - Modernize Mediatek clk driver by consolidating code - Add watchdog (WDT), I2C, and pin function controller (PFC) clocks on Renesas R-Car S4-8 - Improve the clocks for the Rockchip rk3568 display outputs (parenting, pll-rates) - Use of_device_get_match_data() instead of open-coding on Rockchip rk3568 - Reintroduce the expected fractional-divider behaviour that disappeared with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS - Remove SYS PLL 1/2 clock gates for i.MX8M* - Remove AUDIO MCLK ROOT from i.MX7D - Add fracn gppll clock type used by i.MX93 - Add new composite clock for i.MX93 - Add missing media mipi phy ref clock for i.MX8MP - Fix off by one in imx_lpcg_parse_clks_from_dt() - Rework for the imx pll14xx - sama7g5: One low priority fix for GCLK of PDMC - Add DMA engine (SYS-DMAC) clocks on Renesas R-Car S4-8 - Add MOST (MediaLB I/F) clocks on Renesas R-Car E3 and D3 - Add CAN-FD clocks on Renesas R-Car V3U - Qualcomm SC8280XP RPMCC - Add some missing clks on Qualcomm MSM8992/MSM8994/MSM8998 SoCs - Rework Qualcomm GCC bindings and convert SDM845 camera bindig to YAML - Convert various Qualcomm drivers to use clk_parent_data - Remove test clocks from various Qualcomm drivers - Crypto engine clks on Qualcomm IPQ806x + more freqs for SDCC/NSS - Qualcomm SM8150 EMAC, PCIe, UFS GDSCs - Better pixel clk frequency support on Qualcomm RCG2 clks" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits) clk: zynq: Update the parameters to zynq_clk_register_periph_clk clk: zynq: trivial warning fix clk: Drop the rate range on clk_put() clk: test: Test clk_set_rate_range on orphan mux clk: Initialize orphan req_rate dt-bindings: clock: drop useless consumer example dt-bindings: clock: renesas: Make example 'clocks' parsable clk: qcom: gcc-msm8994: Fix gpll4 width dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml clk: rs9: Add Renesas 9-series PCIe clock generator driver clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index() clk: visconti: prevent array overflow in visconti_clk_register_gates() dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator clk: sifive: Move all stuff into SoCs header files from C files clk: sifive: Add SoCs prefix in each SoCs-dependent data riscv: dts: Change the macro name of prci in each device node dt-bindings: change the macro name of prci in header files and example clk: sifive: duplicate the macro definitions for the time being clk: qcom: sm6125-gcc: fix typos in comments clk: ti: clkctrl: fix typos in comments ...
| *-. Merge branches 'clk-range', 'clk-uniphier', 'clk-apple' and 'clk-qcom' into ↵Stephen Boyd2022-03-2921-888/+4364
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | clk-next - Make clk_set_rate_range() re-evaluate the limits each time - Introduce various clk_set_rate_range() tests - Add clk_drop_range() to drop a previously set range - Support for NCO blocks on Apple SoCs * clk-range: clk: Drop the rate range on clk_put() clk: test: Test clk_set_rate_range on orphan mux clk: Initialize orphan req_rate clk: bcm: rpi: Run some clocks at the minimum rate allowed clk: bcm: rpi: Set a default minimum rate clk: bcm: rpi: Add variant structure clk: Add clk_drop_range clk: Always set the rate on clk_set_range_rate clk: Use clamp instead of open-coding our own clk: Always clamp the rounded rate clk: Enforce that disjoints limits are invalid clk: Introduce Kunit Tests for the framework clk: Fix clk_hw_get_clk() when dev is NULL * clk-uniphier: clk: uniphier: Fix fixed-rate initialization * clk-apple: clk: clk-apple-nco: Allow and fix module building MAINTAINERS: Add clk-apple-nco under ARM/APPLE MACHINE clk: clk-apple-nco: Add driver for Apple NCO dt-bindings: clock: Add Apple NCO * clk-qcom: (61 commits) clk: qcom: gcc-msm8994: Fix gpll4 width dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml clk: qcom: Add display clock controller driver for SM6125 dt-bindings: clock: add QCOM SM6125 display clock bindings clk: qcom: Fix sorting of SDX_GCC_65 in Makefile and Kconfig clk: qcom: gcc: Add emac GDSC support for SM8150 clk: qcom: gcc: sm8150: Fix some identation issues clk: qcom: gcc: Add UFS_CARD and UFS_PHY GDSCs for SM8150 clk: qcom: gcc: Add PCIe0 and PCIe1 GDSC for SM8150 clk: qcom: clk-rcg2: Update the frac table for pixel clock clk: qcom: clk-rcg2: Update logic to calculate D value for RCG clk: qcom: smd: Add missing MSM8998 RPM clocks clk: qcom: smd: Add missing RPM clocks for msm8992/4 dt-bindings: clock: qcom: rpmcc: Add RPM Modem SubSystem (MSS) clocks clk: qcom: gcc-ipq806x: add CryptoEngine resets dt-bindings: reset: add ipq8064 ce5 resets clk: qcom: gcc-ipq806x: add CryptoEngine clocks dt-bindings: clock: add ipq8064 ce5 clk define clk: qcom: gcc-ipq806x: add additional freq for sdc table clk: qcom: clk-rcg: add clk_rcg_floor_ops ops ...
| | | * clk: qcom: gcc-msm8994: Fix gpll4 widthKonrad Dybcio2022-03-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The gpll4 postdiv is actually a div4, so make sure that Linux is aware of this. This fixes the following error messages: mmc1: Card appears overclocked; req 200000000 Hz, actual 343999999 Hz mmc1: Card appears overclocked; req 400000000 Hz, actual 687999999 Hz Fixes: aec89f78cf01 ("clk: qcom: Add support for msm8994 global clock controller") Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20220319174940.341137-1-konrad.dybcio@somainline.org Tested-by: Petr Vorel <petr.vorel@gmail.com> Reviewed-by: Petr Vorel <petr.vorel@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
| | | * clk: qcom: Add display clock controller driver for SM6125Martin Botka2022-03-093-0/+719
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the display clock controller found on SM6125 based devices. This allows display drivers to probe and control their clocks. Signed-off-by: Martin Botka <martin.botka@somainline.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220303131812.302302-4-marijn.suijten@somainline.org
| | | * clk: qcom: Fix sorting of SDX_GCC_65 in Makefile and KconfigMarijn Suijten2022-03-092-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to keep at least the list of `CONFIG_SM_` drivers sorted alphabetically, SDX_GCC_65 should have been moved one line up. This in turn makes it easier and cleaner to add the followup SM_DISPCC_6125 driver in the right place, right before SM_DISPCC_8250. Fixes: d79afa201328 ("clk: qcom: Add SDX65 GCC support") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220303131812.302302-2-marijn.suijten@somainline.org
| | | * clk: qcom: gcc: Add emac GDSC support for SM8150Bhupesh Sharma2022-03-091-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the EMAC GDSC defines and driver structures for SM8150. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220303084824.284946-4-bhupesh.sharma@linaro.org
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-25 10:26:12 +0000