summaryrefslogtreecommitdiffstats
path: root/drivers/dma/pl330.c
Commit message (Collapse)AuthorAgeFilesLines
* dmaengine: pl330: _stop: clear interrupt statusSugar Zhang2019-04-261-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch kill instructs the DMAC to immediately terminate execution of a thread. and then clear the interrupt status, at last, stop generating interrupts for DMA_SEV. to guarantee the next dma start is clean. otherwise, one interrupt maybe leave to next start and make some mistake. we can reporduce the problem as follows: DMASEV: modify the event-interrupt resource, and if the INTEN sets function as interrupt, the DMAC will set irq<event_num> HIGH to generate interrupt. write INTCLR to clear interrupt. DMA EXECUTING INSTRUCTS DMA TERMINATE | | | | ... _stop | | | spin_lock_irqsave DMASEV | | | | mask INTEN | | | DMAKILL | | | spin_unlock_irqrestore in above case, a interrupt was left, and if we unmask INTEN, the DMAC will set irq<event_num> HIGH to generate interrupt. to fix this, do as follows: DMA EXECUTING INSTRUCTS DMA TERMINATE | | | | ... _stop | | | spin_lock_irqsave DMASEV | | | | DMAKILL | | | clear INTCLR | mask INTEN | | | spin_unlock_irqrestore Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
* dmaengine: pl330: introduce debugfs interfaceKatsuhiro Suzuki2019-03-251-0/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds debugfs interface to show the relationship between DMA threads (hardware resource for transferring data) and DMA channel ID of DMA slave. Typically, PL330 has many slaves than number of DMA threads. So sometimes PL330 cannot allocate DMA threads for all slaves even if a user specify DMA channel ID in devicetree. This interface will be useful for checking that DMA threads are allocated or not. Below is an output sample: $ sudo cat /sys/kernel/debug/ff1f0000.dmac PL330 physical channels: THREAD: CHANNEL: -------- ----- 0 8 1 9 2 11 3 12 4 14 5 15 6 10 7 -- Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> Signed-off-by: Vinod Koul <vkoul@kernel.org>
* dmaengine: pl330: drop useless LIST_HEADJulia Lawall2019-01-071-1/+0
| | | | | | | | | | | | | | | | | | | | | | Drop LIST_HEAD where the variable it declares is never used. The variable has not been used since the function was introduced in 740aa95703c5 ("dmaengine: pl330: Split device_control"). The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; @@ - LIST_HEAD(x); ... when != x // </smpl> Fixes: 740aa95703c5 ("dmaengine: pl330: Split device_control") Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Vinod Koul <vkoul@kernel.org>
* dmaengine: pl330: remove dma_slave_config direction usageVinod Koul2018-11-241-4/+24
| | | | | | | | dma_slave_config direction was marked as deprecated quite some time back, remove the usage from this driver so that the field can be removed Signed-off-by: Vinod Koul <vkoul@kernel.org>
* Merge tag 'dmaengine-4.19-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2018-08-181-6/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull DMAengine updates from Vinod Koul: "This round brings couple of framework changes, a new driver and usual driver updates: - new managed helper for dmaengine framework registration - split dmaengine pause capability to pause and resume and allow drivers to report that individually - update dma_request_chan_by_mask() to handle deferred probing - move imx-sdma to use virt-dma - new driver for Actions Semi Owl family S900 controller - minor updates to intel, renesas, mv_xor, pl330 etc" * tag 'dmaengine-4.19-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (46 commits) dmaengine: Add Actions Semi Owl family S900 DMA driver dt-bindings: dmaengine: Add binding for Actions Semi Owl SoCs dmaengine: sh: rcar-dmac: Should not stop the DMAC by rcar_dmac_sync_tcr() dmaengine: mic_x100_dma: use the new helper to simplify the code dmaengine: add a new helper dmaenginem_async_device_register dmaengine: imx-sdma: add memcpy interface dmaengine: imx-sdma: add SDMA_BD_MAX_CNT to replace '0xffff' dmaengine: dma_request_chan_by_mask() to handle deferred probing dmaengine: pl330: fix irq race with terminate_all dmaengine: Revert "dmaengine: mv_xor_v2: enable COMPILE_TEST" dmaengine: mv_xor_v2: use {lower,upper}_32_bits to configure HW descriptor address dmaengine: mv_xor_v2: enable COMPILE_TEST dmaengine: mv_xor_v2: move unmap to before callback dmaengine: mv_xor_v2: convert callback to helper function dmaengine: mv_xor_v2: kill the tasklets upon exit dmaengine: mv_xor_v2: explicitly freeup irq dmaengine: sh: rcar-dmac: Add dma_pause operation dmaengine: sh: rcar-dmac: add a new function to clear CHCR.DE with barrier dmaengine: idma64: Support dmaengine_terminate_sync() dmaengine: hsu: Support dmaengine_terminate_sync() ...
| * dmaengine: pl330: fix irq race with terminate_allJohn Keeping2018-07-251-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In pl330_update() when checking if a channel has been aborted, the channel's lock is not taken, only the overall pl330_dmac lock. But in pl330_terminate_all() the aborted flag (req_running==-1) is set under the channel lock and not the pl330_dmac lock. With threaded interrupts, this leads to a potential race: pl330_terminate_all pl330_update ------------------- ------------ lock channel entry lock pl330 _stop channel unlock pl330 lock pl330 check req_running != -1 req_running = -1 _start channel Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * dmaengine: pl330: remove set but unused variableVinod Koul2018-07-101-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Compiler complains (with W=1): drivers/dma/pl330.c: In function ‘pl330_release_channel’: drivers/dma/pl330.c:1782:21: warning: variable ‘pl330’ set but not used [-Wunused-but-set-variable] struct pl330_dmac *pl330; ^~~~~ Remove the pl330 variable in pl330_release_channel as it is set but never used. Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * dmaengine: pl330: Mark expected switch fall-throughVinod Koul2018-07-101-0/+3
| | | | | | | | | | | | | | | | In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
* | dmaengine: pl330: report BURST residue granularityMarek Szyprowski2018-06-281-1/+1
|/ | | | | | | | | The reported residue is already calculated in BURST unit granularity, so advertise this capability properly to other devices in the system. Fixes: aee4d1fac887 ("dmaengine: pl330: improve pl330_tx_status() function") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
* treewide: kzalloc() -> kcalloc()Kees Cook2018-06-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
* dmaengine: pl330: flush before wait, and add dev burst support.Frank Mori Hess2018-05-031-50/+159
| | | | | | | | | | | | | Do DMAFLUSHP _before_ the first DMAWFP to ensure controller and peripheral are in agreement about dma request state before first transfer. Add support for burst transfers to/from peripherals. In the new scheme, the controller does as many burst transfers as it can then transfers the remaining dregs with either single transfers for peripherals, or with a reduced size burst for memory-to-memory transfers. Signed-off-by: Frank Mori Hess <fmh6jj@gmail.com> Tested-by: Frank Mori Hess <fmh6jj@gmail.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
* dmaengine: pl330: fix a race condition in case of threaded irqsQi Hou2018-03-061-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When booting up with "threadirqs" in command line, all irq handlers of the DMA controller pl330 will be threaded forcedly. These threads will race for the same list, pl330->req_done. Before the callback, the spinlock was released. And after it, the spinlock was taken. This opened an race window where another threaded irq handler could steal the spinlock and be permitted to delete entries of the list, pl330->req_done. If the later deleted an entry that was still referred to by the former, there would be a kernel panic when the former was scheduled and tried to get the next sibling of the deleted entry. The scenario could be depicted as below: Thread: T1 pl330->req_done Thread: T2 | | | | -A-B-C-D- | Locked | | | | Waiting Del A | | | -B-C-D- | Unlocked | | | | Locked Waiting | | | | Del B | | | | -C-D- Unlocked Waiting | | | Locked | get C via B \ - Kernel panic The kernel panic looked like as below: Unable to handle kernel paging request at virtual address dead000000000108 pgd = ffffff8008c9e000 [dead000000000108] *pgd=000000027fffe003, *pud=000000027fffe003, *pmd=0000000000000000 Internal error: Oops: 96000044 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 85 Comm: irq/59-66330000 Not tainted 4.8.24-WR9.0.0.12_standard #2 Hardware name: Broadcom NS2 SVK (DT) task: ffffffc1f5cc3c00 task.stack: ffffffc1f5ce0000 PC is at pl330_irq_handler+0x27c/0x390 LR is at pl330_irq_handler+0x2a8/0x390 pc : [<ffffff80084cb694>] lr : [<ffffff80084cb6c0>] pstate: 800001c5 sp : ffffffc1f5ce3d00 x29: ffffffc1f5ce3d00 x28: 0000000000000140 x27: ffffffc1f5c530b0 x26: dead000000000100 x25: dead000000000200 x24: 0000000000418958 x23: 0000000000000001 x22: ffffffc1f5ccd668 x21: ffffffc1f5ccd590 x20: ffffffc1f5ccd418 x19: dead000000000060 x18: 0000000000000001 x17: 0000000000000007 x16: 0000000000000001 x15: ffffffffffffffff x14: ffffffffffffffff x13: ffffffffffffffff x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000000840 x9 : ffffffc1f5ce0000 x8 : ffffffc1f5cc3338 x7 : ffffff8008ce2020 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000001 x3 : dead000000000200 x2 : dead000000000100 x1 : 0000000000000140 x0 : ffffffc1f5ccd590 Process irq/59-66330000 (pid: 85, stack limit = 0xffffffc1f5ce0020) Stack: (0xffffffc1f5ce3d00 to 0xffffffc1f5ce4000) 3d00: ffffffc1f5ce3d80 ffffff80080f09d0 ffffffc1f5ca0c00 ffffffc1f6f7c600 3d20: ffffffc1f5ce0000 ffffffc1f6f7c600 ffffffc1f5ca0c00 ffffff80080f0998 3d40: ffffffc1f5ce0000 ffffff80080f0000 0000000000000000 0000000000000000 3d60: ffffff8008ce202c ffffff8008ce2020 ffffffc1f5ccd668 ffffffc1f5c530b0 3d80: ffffffc1f5ce3db0 ffffff80080f0d70 ffffffc1f5ca0c40 0000000000000001 3da0: ffffffc1f5ce0000 ffffff80080f0cfc ffffffc1f5ce3e20 ffffff80080bf4f8 3dc0: ffffffc1f5ca0c80 ffffff8008bf3798 ffffff8008955528 ffffffc1f5ca0c00 3de0: ffffff80080f0c30 0000000000000000 0000000000000000 0000000000000000 3e00: 0000000000000000 0000000000000000 0000000000000000 ffffff80080f0b68 3e20: 0000000000000000 ffffff8008083690 ffffff80080bf420 ffffffc1f5ca0c80 3e40: 0000000000000000 0000000000000000 0000000000000000 ffffff80080cb648 3e60: ffffff8008b1c780 0000000000000000 0000000000000000 ffffffc1f5ca0c00 3e80: ffffffc100000000 ffffff8000000000 ffffffc1f5ce3e90 ffffffc1f5ce3e90 3ea0: 0000000000000000 ffffff8000000000 ffffffc1f5ce3eb0 ffffffc1f5ce3eb0 3ec0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3ee0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f00: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f40: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f80: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3fa0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3fc0: 0000000000000000 0000000000000005 0000000000000000 0000000000000000 3fe0: 0000000000000000 0000000000000000 0000000275ce3ff0 0000000275ce3ff8 Call trace: Exception stack(0xffffffc1f5ce3b30 to 0xffffffc1f5ce3c60) 3b20: dead000000000060 0000008000000000 3b40: ffffffc1f5ce3d00 ffffff80084cb694 0000000000000008 0000000000000e88 3b60: ffffffc1f5ce3bb0 ffffff80080dac68 ffffffc1f5ce3b90 ffffff8008826fe4 3b80: 00000000000001c0 00000000000001c0 ffffffc1f5ce3bb0 ffffff800848dfcc 3ba0: 0000000000020000 ffffff8008b15ae4 ffffffc1f5ce3c00 ffffff800808f000 3bc0: 0000000000000010 ffffff80088377f0 ffffffc1f5ccd590 0000000000000140 3be0: dead000000000100 dead000000000200 0000000000000001 0000000000000000 3c00: 0000000000000000 ffffff8008ce2020 ffffffc1f5cc3338 ffffffc1f5ce0000 3c20: 0000000000000840 0000000000000001 0000000000000000 ffffffffffffffff 3c40: ffffffffffffffff ffffffffffffffff 0000000000000001 0000000000000007 [<ffffff80084cb694>] pl330_irq_handler+0x27c/0x390 [<ffffff80080f09d0>] irq_forced_thread_fn+0x38/0x88 [<ffffff80080f0d70>] irq_thread+0x140/0x200 [<ffffff80080bf4f8>] kthread+0xd8/0xf0 [<ffffff8008083690>] ret_from_fork+0x10/0x40 Code: f2a00838 f9405763 aa1c03e1 aa1503e0 (f9000443) ---[ end trace f50005726d31199c ]--- Kernel panic - not syncing: Fatal exception in interrupt SMP: stopping secondary CPUs SMP: failed to stop secondary CPUs 0-1 Kernel Offset: disabled Memory Limit: none ---[ end Kernel panic - not syncing: Fatal exception in interrupt To fix this, re-start with the list-head after dropping the lock then re-takeing it. Reviewed-by: Frank Mori Hess <fmh6jj@gmail.com> Tested-by: Frank Mori Hess <fmh6jj@gmail.com> Signed-off-by: Qi Hou <qi.hou@windriver.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dmaengine: pl330: fix descriptor allocation failAlexander Kochetkov2017-10-201-19/+20
| | | | | | | | | | | | | | | | | | | | | | | If two concurrent threads call pl330_get_desc() when DMAC descriptor pool is empty it is possible that allocation for one of threads will fail with message: kernel: dma-pl330 20078000.dma-controller: pl330_get_desc:2469 ALERT! Here how that can happen. Thread A calls pl330_get_desc() to get descriptor. If DMAC descriptor pool is empty pl330_get_desc() allocates new descriptor on shared pool using add_desc() and then get newly allocated descriptor using pluck_desc(). At the same time thread B calls pluck_desc() and take newly allocated descriptor. In that case descriptor allocation for thread A will fail. Using on-stack pool for new descriptor allow avoid the issue described. The patch modify pl330_get_desc() to use on-stack pool for allocation new descriptors. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dmaengine: pl330: constify amba_idArvind Yadav2017-08-281-1/+1
| | | | | | | | amba_id are not supposed to change at runtime. All functions working with const amba_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* Merge tag 'dmaengine-4.13-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2017-07-081-76/+66
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull dmaengine updates from Vinod Koul: - removal of AVR32 support in dw driver as AVR32 is gone - new driver for Broadcom stream buffer accelerator (SBA) RAID driver - add support for Faraday Technology FTDMAC020 in amba-pl08x driver - IOMMU support in pl330 driver - updates to bunch of drivers * tag 'dmaengine-4.13-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (36 commits) dmaengine: qcom_hidma: correct API violation for submit dmaengine: zynqmp_dma: Remove max len check in zynqmp_dma_prep_memcpy dmaengine: tegra-apb: Really fix runtime-pm usage dmaengine: fsl_raid: make of_device_ids const. dmaengine: qcom_hidma: allow ACPI/DT parameters to be overridden dmaengine: fsldma: set BWC, DAHTS and SAHTS values correctly dmaengine: Kconfig: Simplify the help text for MXS_DMA dmaengine: pl330: Delete unused functions dmaengine: Replace WARN_TAINT_ONCE() with pr_warn_once() dmaengine: Kconfig: Extend the dependency for MXS_DMA dmaengine: mxs: Use %zu for printing a size_t variable dmaengine: ste_dma40: Cleanup scatterlist layering violations dmaengine: imx-dma: cleanup scatterlist layering violations dmaengine: use proper name for the R-Car SoC dmaengine: imx-sdma: Fix compilation warning. dmaengine: imx-sdma: Handle return value of clk_prepare_enable dmaengine: pl330: Add IOMMU support to slave tranfers dmaengine: DW DMAC: Handle return value of clk_prepare_enable dmaengine: pl08x: use GENMASK() to create bitmasks dmaengine: pl08x: Add support for Faraday Technology FTDMAC020 ...
| * dmaengine: pl330: Delete unused functionsMatthias Kaehlcke2017-06-171-67/+0
| | | | | | | | | | | | | | | | The functions _queue_empty(), _emit_ADDH(), _emit_NOP(), _emit_STZ() and _emit_WFE() are not used. Delete them. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * dmaengine: pl330: Add IOMMU support to slave tranfersRobin Murphy2017-05-301-9/+66
| | | | | | | | | | | | | | | | | | Wire up dma_map_resource() for slave transfers, so that we can let the PL330 use IOMMU-backed DMA mapping ops on systems with an appropriate IOMMU and RAM above 4GB, to avoid CPU bounce buffering. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* | dmaengine: pl330: fix warning in pl330_removeJean-Philippe Brucker2017-06-021-1/+2
|/ | | | | | | | | | When removing a device with less than 9 IRQs (AMBA_NR_IRQS), we'll get a big WARN_ON from devres.c because pl330_remove calls devm_free_irqs for unallocated irqs. Similarly to pl330_probe, check that IRQ number is present before calling devm_free_irq. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dmaengine: pl330: remove pdata based initializationMarek Szyprowski2017-03-281-34/+8
| | | | | | | | | | | | This driver is now used only on platforms which support device tree, so it is safe to remove legacy platform data based initialization code. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> For plat-samsung: Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
*-----. Merge branches 'iommu/fixes', 'arm/exynos', 'arm/renesas', 'arm/smmu', ↵Joerg Roedel2017-02-101-15/+20
|\ \ \ \ | | | | | | | | | | | | | | | 'arm/mediatek', 'arm/core', 'x86/vt-d' and 'core' into next
| | | | * Merge branch 'iommu/iommu-priv' of ↵Joerg Roedel2017-01-301-2/+3
| | | |/| | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/core
| | | | * dmaengine: pl330: Make sure microcode is privilegedMitchel Humpherys2017-01-191-2/+3
| |_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PL330 is hard-wired such that instruction fetches on both the manager and channel threads go out onto the bus with the "privileged" bit set. This can become troublesome once there is an IOMMU or other form of memory protection downstream, since those will typically be programmed by the DMA mapping subsystem in the expectation of normal unprivileged transactions (such as the PL330 channel threads' own data accesses as currently configured by this driver). To avoid the case of, say, an IOMMU blocking an unexpected privileged transaction with a permission fault, use the newly-introduced DMA_ATTR_PRIVILEGED attribute for the mapping of our microcode buffer. That way the DMA layer can do whatever it needs to do to make things continue to work as expected on more complex systems. Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mitchel Humpherys <mitchelh@codeaurora.org> [rm: remove now-redundant local variable, clarify commit message] Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
| | * | dmaengine: pl330: fix double lockIago Abal2017-01-251-13/+6
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The static bug finder EBA (http://www.iagoabal.eu/eba/) reported the following double-lock bug: Double lock: 1. spin_lock_irqsave(pch->lock, flags) at pl330_free_chan_resources:2236; 2. call to function `pl330_release_channel' immediately after; 3. call to function `dma_pl330_rqcb' in line 1753; 4. spin_lock_irqsave(pch->lock, flags) at dma_pl330_rqcb:1505. I have fixed it as suggested by Marek Szyprowski. First, I have replaced `pch->lock' with `pl330->lock' in functions `pl330_alloc_chan_resources' and `pl330_free_chan_resources'. This avoids the double-lock by acquiring a different lock than `dma_pl330_rqcb'. NOTE that, as a result, `pl330_free_chan_resources' executes `list_splice_tail_init' on `pch->work_list' under lock `pl330->lock', whereas in the rest of the code `pch->work_list' is protected by `pch->lock'. I don't know if this may cause race conditions. Similarly `pch->cyclic' is written by `pl330_alloc_chan_resources' under `pl330->lock' but read by `pl330_tx_submit' under `pch->lock'. Second, I have removed locking from `pl330_request_channel' and `pl330_release_channel' functions. Function `pl330_request_channel' is only called from `pl330_alloc_chan_resources', so the lock is already held. Function `pl330_release_channel' is called from `pl330_free_chan_resources', which already holds the lock, and from `pl330_del'. Function `pl330_del' is called in an error path of `pl330_probe' and at the end of `pl330_remove', but I assume that there cannot be concurrent accesses to the protected data at those points. Signed-off-by: Iago Abal <mail@iagoabal.eu> Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| | * dmaengine: pl330: Fix runtime PM support for terminated transfersMarek Szyprowski2017-01-031-0/+11
| |/ |/| | | | | | | | | | | | | | | | | | | | | PL330 DMA engine driver is leaking a runtime reference after any terminated DMA transactions. This patch fixes this issue by tracking runtime PM state of the device and making additional call to pm_runtime_put() in terminate_all callback if needed. Fixes: ae43b3289186 ("ARM: 8202/1: dmaengine: pl330: Add runtime Power Management support v12") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* | dmaengine: pl330: remove unused ‘regs’Vinod Koul2016-12-121-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | In pl330_add(), variable ‘regs’ is initialized but never used, which leads to warning with W=1. drivers/dma/pl330.c: In function 'pl330_add': drivers/dma/pl330.c:1891:16: warning: variable 'regs' set but not used [-Wunused-but-set-variable] So remove it. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* | dmaengine: pl330: do not generate unaligned accessVladimir Murzin2016-12-081-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When PL330 is used with !MMU the following fault is seen: Unhandled fault: alignment exception (0x801) at 0x8f26a002 Internal error: : 801 [#1] ARM Modules linked in: CPU: 0 PID: 640 Comm: dma0chan0-copy0 Not tainted 4.8.0-6a82063-clean+ #1600 Hardware name: ARM-Versatile Express task: 8f1baa80 task.stack: 8e6fe000 PC is at _setup_req+0x4c/0x350 LR is at 0x8f2cbc00 pc : [<801ea538>] lr : [<8f2cbc00>] psr: 60000093 sp : 8e6ffdc0 ip : 00000000 fp : 00000000 r10: 00000000 r9 : 8f2cba10 r8 : 8f2cbc00 r7 : 80000013 r6 : 8f21a050 r5 : 8f21a000 r4 : 8f2ac800 r3 : 8e6ffe18 r2 : 00944251 r1 : ffffffbc r0 : 8f26a000 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none Control: 00c5387c Process dma0chan0-copy0 (pid: 640, stack limit = 0x8e6fe210) Stack: (0x8e6ffdc0 to 0x8e700000) fdc0: 00000001 60000093 00000000 8f2cba10 8f26a000 00000004 8f0ae000 8f2cbc00 fde0: 8f0ae000 8f2ac800 8f21a000 8f21a050 80000013 8f2cbc00 8f2cba10 00000000 fe00: 60000093 801ebca0 8e6ffe18 000013ff 40000093 00000000 00944251 8f2ac800 fe20: a0000013 8f2b1320 00001986 00000000 00000001 000013ff 8f1e4f00 8f2cba10 fe40: 8e6fff6c 801e9044 00000003 00000000 fef98c80 002faf07 8e6ffe7c 00000000 fe60: 00000002 00000000 00001986 8f1f158d 8f1e4f00 80568de4 00000002 00000000 fe80: 00001986 8f1f53ff 40000001 80580500 8f1f158d 8001e00c 00000000 cfdfdfdf fea0: fdae2a25 00000001 00000004 8e6fe000 00000008 00000010 00000000 00000005 fec0: 8f2b1330 8f2b1334 8e6ffe80 8e6ffe8c 00001986 00000000 8f21a014 00000001 fee0: 8e6ffe60 8e6ffe78 00000002 00000000 000013ff 00000001 80568de4 8f1e8018 ff00: 0000158d 8055ec30 00000001 803f6b00 00001986 8f2cba10 fdae2a25 00000001 ff20: 8f1baca8 8e6fff24 8e6fff24 00000000 8e6fff24 ac6f3037 00000000 00000000 ff40: 00000000 8e6fe000 8f1e4f40 00000000 8f1e4f40 8f1e4f00 801e84ec 00000000 ff60: 00000000 00000000 00000000 80031714 dfdfdfcf 00000000 dfdfdfcf 8f1e4f00 ff80: 00000000 8e6fff84 8e6fff84 00000000 8e6fff90 8e6fff90 8e6fffac 8f1e4f40 ffa0: 80031640 00000000 00000000 8000f548 00000000 00000000 00000000 00000000 ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 dfdfdfcf cfdfdfdf [<801ea538>] (_setup_req) from [<801ebca0>] (pl330_tasklet+0x41c/0x490) [<801ebca0>] (pl330_tasklet) from [<801e9044>] (dmatest_func+0xb58/0x149c) [<801e9044>] (dmatest_func) from [<80031714>] (kthread+0xd4/0xec) [<80031714>] (kthread) from [<8000f548>] (ret_from_fork+0x14/0x2c) Code: e3a03001 e3e01043 e5c03001 e59d3048 (e5802002) This happens because _emit_{ADDH,MOV,GO) accessing to unaligned data while writing to buffer. Fix it with writing to buffer byte by byte. Reviewed-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* | dmaengine: pl330: Handle xferred count if DMAMOV hasn't finishedStephen Barber2016-11-141-0/+5
|/ | | | | | | | | | After executing DMAGO it's possible that a request can come in for the current xferred count, but if that happens too soon then DMAMOV SAR/DAR may not have yet completed. If that happens, we should explicitly return 0 since nothing has been transferred yet. Signed-off-by: Stephen Barber <smbarber@chromium.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* Merge branch 'topic/pl330' into for-linusVinod Koul2016-10-031-1/+14
|\
| * dmaengine: pl330: Acquire dmac's spinlock in pl330_tx_statusHsin-Yu Chao2016-09-091-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a racing when accessing dmac thread in pl330_tx_status that the pl330_update is handling active request at the same time and changing the status of descriptors. This could cause an invalid transferred count from BUSY descriptor added up to the residual number. Fix the bug by using the dmac's spinlock in pl330_tx_status to protect thread resources from changing. Note that the nested order of holding dmac's and dma_chan's spinlock is consistent with the rest of the driver: dma_chan first and then dmac, so it is safe from deadlock scenario. Signed-off-by: Hsin-Yu Chao <hychao@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * dmaengine: pl330: fix residual for non-running BUSY descriptorsStephen Barber2016-09-091-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | Only one descriptor in the work list should be running at any given time, but it's possible to have an enqueued BUSY descriptor that has not yet transferred any data, or for a BUSY descriptor to linger briefly before transitioning to DONE. These cases should be handled to keep residual calculations consistent even with the non-running BUSY descriptors in the work list. Signed-off-by: Stephen Barber <smbarber@chromium.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* | dmaengine: pl330: convert callback to helper functionDave Jiang2016-08-081-6/+4
|/ | | | | | | | | | | This is in preperation of moving to a callback that provides results to the callback for the transaction. The conversion will maintain current behavior and the driver must convert to new callback mechanism at a later time in order to receive results. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dmaengine: pl330: explicitly freeup irqVinod Koul2016-07-161-0/+6
| | | | | | | | | | | | dmaengine device should explicitly call devm_free_irq() when using devm_request_irq(). The irq is still ON when devices remove is executed and irq should be quiesced before remove is completed. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Cc: Jassi Brar <jassisinghbrar@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org>
* dmaengine: Remove site specific OOM error messages on kzallocPeter Griffin2016-06-211-4/+1
| | | | | | | | | | If kzalloc() fails it will issue it's own error message including a dump_stack(). So remove the site specific error messages. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dmaengine: pl330: fix to support the burst modeCaesar Wang2016-03-011-5/+4
| | | | | | | | | | | | | | | | This patch fixes the burst mode that will break DMA uart on SoCFPGA. In some cases, some SoCS didn't support the multi-burst even if the devices who use the pl330 claim support the maxburst. Fixes: commit 848e977 "dmaengine: pl330: support burst mode for dev-to-mem and mem-to-dev transmit" Reported-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Tested-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Tested-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dmaengine: pl330: add max burst for dmaengineShawn Lin2016-02-091-0/+3
| | | | | | | | | This patch add max burst capability for dmaengine and limit burst capability to one for PL330_QUIRK_BROKEN_NO_FLUSHP Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dmaengine: pl330: add quirk for broken no flushpAddy Ke2016-02-091-25/+62
| | | | | | | | | | | | | | | This patch add "arm,pl330-broken-no-flushp" quirk to avoid execute DMAFLUSHP if Soc doesn't support it. Signed-off-by: Addy Ke <addy.ke@rock-chips.com> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> cc: Doug Anderson <dianders@chromium.org> cc: Heiko Stuebner <heiko@sntech.de> cc: Olof Johansson <olof@lixom.net> Reviewed-by: Sonny Rao <sonnyrao@chromium.org> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dmaengine: pl330: support burst mode for dev-to-mem and mem-to-dev transmitBoojin Kim2016-02-091-7/+13
| | | | | | | | | | | | | | | | This patch adds to support burst mode for dev-to-mem and mem-to-dev transmit. Signed-off-by: Boojin Kim <boojin.kim@samsung.com> Signed-off-by: Addy Ke <addy.ke@rock-chips.com> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> cc: Heiko Stuebner <heiko@sntech.de> cc: Doug Anderson <dianders@chromium.org> cc: Olof Johansson <olof@lixom.net> Reviewed-by: Sonny Rao <sonnyrao@chromium.org> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* Merge tag 'dmaengine-4.3-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2015-09-041-0/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull dmaengine updates from Vinod Koul: "This time we have aded a new capability for scatter-gathered memset using dmaengine APIs. This is supported in xdmac & hdmac drivers We have added support for reusing descriptors for examples like video buffers etc. Driver will follow The behaviour of descriptor ack has been clarified and documented New devices added are: - dma controller in sun[457]i SoCs - lpc18xx dmamux - ZTE ZX296702 dma controller - Analog Devices AXI-DMAC DMA controller - eDMA support for dma-crossbar - imx6sx support in imx-sdma driver - imx-sdma device to device support Other: - jz4780 fixes - ioatdma large refactor and cleanup for removal of ioat v1 and v2 which is deprecated and fixes - ACPI support in X-Gene DMA engine driver - ipu irq fixes - mvxor fixes - minor fixes spread thru drivers" [ The Kconfig and Makefile entries got re-sorted alphabetically, and I handled the conflict with the new Intel integrated IDMA driver by slightly mis-sorting it on purpose: "IDMA64" got sorted after "IMX" in order to keep the Intel entries together. I think it might be a good idea to just rename the IDMA64 config entry to INTEL_IDMA64 to make the sorting be a true sort, not this mismash. Also, this merge disables the COMPILE_TEST for the sun4i DMA controller, because it does not compile cleanly at all. - Linus ] * tag 'dmaengine-4.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (89 commits) dmaengine: ioatdma: add Broadwell EP ioatdma PCI dev IDs dmaengine :ipu: change ipu_irq_handler() to remove compile warning dmaengine: ioatdma: Fix variable array length dmaengine: ioatdma: fix sparse "error" with prep lock dmaengine: hdmac: Add memset capabilities dmaengine: sort the sh Makefile dmaengine: sort the sh Kconfig dmaengine: sort the dw Kconfig dmaengine: sort the Kconfig dmaengine: sort the makefile drivers/dma: make mv_xor.c driver explicitly non-modular dmaengine: Add support for the Analog Devices AXI-DMAC DMA controller devicetree: Add bindings documentation for Analog Devices AXI-DMAC dmaengine: xgene-dma: Fix the lock to allow client for further submission of requests dmaengine: ioatdma: fix coccinelle warning dmaengine: ioatdma: fix zero day warning on incompatible pointer type dmaengine: tegra-apb: Simplify locking for device using global pause dmaengine: tegra-apb: Remove unnecessary return statements and variables dmaengine: tegra-apb: Avoid unnecessary channel base address calculation dmaengine: tegra-apb: Remove unused variables ...
| * dmaengine: pl330: do not emit loop for 1 byte transfer.Michal Suchanek2015-08-191-0/+3
| | | | | | | | | | | | | | | | When there is only one burst required do not emit loop instructions to loop exactly once. Emit just the body of the loop. Signed-off-by: Michal Suchanek <hramrach@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* | dmaengine: pl330: Really fix choppy sound because of wrong residue calculationKrzysztof Kozlowski2015-07-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When pl330 driver was used during sound playback, after some time or after a number of plays the sound became choppy or totally noisy. For example on Odroid XU3 board the first four executions of aplay with small WAVE worked fine, but fifth was unrecognizable with errors: $ aplay /usr/share/sounds/alsa/Front_Right.wava underrun!!! (at least 0.095 ms long) Issue was caused by wrong residue reported by pl330 driver to pcm_dmaengine for its cyclic dma transfers. The pl330_tx_status(), residue reporting function, used a "last" flag in a descriptor to indicate that there is no more data to send. The pl330_tx_submit() iterated over descriptors trying to remove this flag from them and then mark last descriptor as "last". However when iterating it actually removed the flag not from descriptors but always from last of it (and then reset it). Thus effectively once some descriptor was marked as last, then it stayed like this forever causing residue to be reported too low. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Fixes: aee4d1fac887 ("dmaengine: pl330: improve pl330_tx_status() function") Cc: <stable@vger.kernel.org> Reported-by: gabriel@unseen.is Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* | dmaengine: pl330: Fix overflow when reporting residue in memcpyKrzysztof Kozlowski2015-07-071-0/+1
|/ | | | | | | | | | | | | | | During memcpy operations the residue was always set to an u32 overflowed value. In pl330_tx_status() function number of currently transferred bytes was subtracted from internal "bytes_requested" field. However this "bytes_requested" was not initialized at start to length of memcpy buffer so transferred bytes were subtracted from 0 causing overflow. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: <stable@vger.kernel.org> Fixes: aee4d1fac887 ("dmaengine: pl330: improve pl330_tx_status() function") Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* Merge tag 'dmaengine-4.2-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2015-06-291-3/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull dmaengine updates from Vinod Koul: "This time we have support for few new devices, few new features and odd fixes spread thru the subsystem. New devices added: - support for CSRatlas7 dma controller - Allwinner H3(sun8i) controller - TI DMA crossbar driver on DRA7x - new pxa driver New features added: - memset support is bought back now that we have a user in xdmac controller - interleaved transfers support different source and destination strides - supporting DMA routers and configuration thru DT - support for reusing descriptors - xdmac memset and interleaved transfer support - hdmac support for interleaved transfers - omap-dma support for memcpy Others: - Constify platform_device_id - mv_xor fixes and improvements" * tag 'dmaengine-4.2-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (46 commits) dmaengine: xgene: fix file permission dmaengine: fsl-edma: clear pending interrupts on initialization dmaengine: xdmac: Add memset support Documentation: dmaengine: document DMA_CTRL_ACK dmaengine: virt-dma: don't always free descriptor upon completion dmaengine: Revert "drivers/dma: remove unused support for MEMSET operations" dmaengine: hdmac: Implement interleaved transfers dmaengine: Move icg helpers to global header dmaengine: mv_xor: improve descriptors list handling and reduce locking dmaengine: mv_xor: Enlarge descriptor pool size dmaengine: mv_xor: add support for a38x command in descriptor mode dmaengine: mv_xor: Rename function for consistent naming dmaengine: mv_xor: bug fix for racing condition in descriptors cleanup dmaengine: pl330: fix wording in mcbufsz message dmaengine: sirf: add CSRatlas7 SoC support dmaengine: xgene-dma: Fix "incorrect type in assignement" warnings dmaengine: fix kernel-doc documentation dmaengine: pxa_dma: add support for legacy transition dmaengine: pxa_dma: add debug information dmaengine: pxa: add pxa dmaengine driver ...
| * dmaengine: pl330: fix wording in mcbufsz messageMichal Suchanek2015-06-081-2/+2
| | | | | | | | | | | | | | | | | | The kernel is not trying to increase mcbufsz. It suggests you should try doing so. Also print the calculated required size of mcbufsz. Signed-off-by: Michal Suchanek <hramrach@gmail.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * dmaengine: pl330: Initialize pl330 for pl330_prep_dma_memcpy after NULL ↵Maninder Singh2015-05-251-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | check of pch Currently pch pointer is already dereferenced before NULL check and thus we are getting below warning: warn: variable dereferenced before check 'pch' So initialize struct pl330_dmac *pl330 after NULL check of dma_pl330_chan *pch. Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Reviewed-by: Vaneet Narang <v.narang@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* | dmaengine: pl330: Fix hang on dmaengine_terminate_all on certain boardsKrzysztof Kozlowski2015-05-221-0/+3
|/ | | | | | | | | | | | | | | | | | | | | | | | | The pl330 device could hang infinitely on certain boards when DMA channels are terminated. It was caused by lack of runtime resume when executing pl330_terminate_all() which calls the _stop() function. _stop() accesses device register and can loop infinitely while checking for device state. The hang was confirmed by Dinh Nguyen on Altera SOCFPGA Cyclone V board during boot. It can be also triggered with: $ echo 1 > /sys/module/dmatest/parameters/iterations $ echo dma1chan0 > /sys/module/dmatest/parameters/channel $ echo 1 > /sys/module/dmatest/parameters/run $ sleep 1 $ cat /sys/module/dmatest/parameters/run Reported-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: ae43b3289186 ("ARM: 8202/1: dmaengine: pl330: Add runtime Power Management support v12") Cc: <stable@vger.kernel.org> Tested-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dmaengine: pl330: fix return status on pending transfersBen Dooks2015-03-181-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | The pl330_tx_status() function returns the desc->status if the dma_cookie_status() call does indicate the cookie completed, however the desc->status is not look directly compatible. Sparse throws the following warning: pl330.c:2262:35: warning: mixing different enum types pl330.c:2262:35: int enum desc_status versus pl330.c:2262:35: int enum dma_status Attempt to fix this by adding a switch statement to turn the desc->status into a dma_status. Note, this has only been tested with the dmatest suite. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> -- Vinod Koul <vinod.koul@intel.com> Dan Williams <dan.j.williams@intel.com> DMA List <dmaengine@vger.kernel.org> Maxime Ripard <maxime.ripard@free-electrons.com> Jassi Brar <jassisinghbrar@gmail.com> Liviu Dudau <Liviu.Dudau@arm.com> Linux ARM Kernel <linux-arm-kernel@lists.infradead.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dmaengine: pl330: make unexported functions staticBen Dooks2015-03-181-3/+3
| | | | | | | | | | | | | | | | | | | | | | | Whilst running sparse on pl330 driver it was noticed there are two functions that are not static but not exported to any other users in the kernel. Fix the following warnings by making 'pl330_pause' and the 'pl330_get_current_xferred_count' static: pl330.c:2165:5: warning: symbol 'pl330_pause' was not declared. Should it be static? pl330.c:2206:5: warning: symbol 'pl330_get_current_xferred_count' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> -- Vinod Koul <vinod.koul@intel.com> Dan Williams <dan.j.williams@intel.com> DMA List <dmaengine@vger.kernel.org> Maxime Ripard <maxime.ripard@free-electrons.com> Jassi Brar <jassisinghbrar@gmail.com> Liviu Dudau <Liviu.Dudau@arm.com> Linux ARM Kernel <linux-arm-kernel@lists.infradead.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dmaengine: pl330: fix issues with big-endian armv7Ben Dooks2015-03-181-4/+4
| | | | | | | | | | | | | | | | | | | | | When running Xilinx Zynq in big-endian mode the pl330 driver fails to pass the dmatest suite. To fix this, ensure all non byte values are written in little endian. As a note, the documentation does not mention if it will do big-endian descriptor fetches, only that it will swap the data in flight. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> -- Vinod Koul <vinod.koul@intel.com> Dan Williams <dan.j.williams@intel.com> DMA List <dmaengine@vger.kernel.org> Maxime Ripard <maxime.ripard@free-electrons.com> Jassi Brar <jassisinghbrar@gmail.com> Liviu Dudau <Liviu.Dudau@arm.com> Linux ARM Kernel <linux-arm-kernel@lists.infradead.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dmaengine: pl330: add DMA_PAUSE featureRobert Baldyga2015-02-161-0/+28
| | | | | | | | | | | | | DMA_PAUSE command is used for halting DMA transfer on chosen channel. It can be useful when we want to safely read residue before terminating all requests on channel. Otherwise there can be situation when some data is transferred before channel termination but after reading residue, which obviously results with data loss. To avoid this situation we can pause channel, read residue and then terminate all requests. This scenario is common, for example, in serial port drivers. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dmaengine: pl330: improve pl330_tx_status() functionRobert Baldyga2015-02-161-2/+72
| | | | | | | | | | This patch adds possibility to read residue of DMA transfer. It's useful when we want to know how many bytes have been transferred before we terminate channel. It can take place, for example, on timeout interrupt. Signed-off-by: Lukasz Czerwinski <l.czerwinski@samsung.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>