summaryrefslogtreecommitdiffstats
path: root/drivers/dma
Commit message (Collapse)AuthorAgeFilesLines
...
| * | dmaengine: dw-edma: Convert ll/dt phys address to PCI bus/DMA addressSerge Semin2023-01-271-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dw_edma_region.paddr field should be a memory base address visible by the DW eDMA controller. If the DMA engine is embedded in the DW PCIe Host/Endpoint controller, the address should belong to the Local CPU/ Application memory. If eDMA is remotely accessible across the PCI bus via PCI memory IOs, the address should be part of the PCI bus memory space. The latter case hasn't been well covered in the corresponding glue-driver. Since pci_dev.resource[] contains resources defined in the CPU memory space, they need to be converted to the PCI bus address space. Convert the LL, DT and CSRs PCI memory ranges with pci_bus_address(). In addition, extend the dw_edma_region.paddr field size. The field normally contains a memory range base address to be set in the DW eDMA Linked-List pointer register or as a base address of the Linked-List data buffer. In accordance with [1] the LL range is supposed to be created in the Local CPU/Application memory, but depending on the DW eDMA utilization the memory can be created as a part of the PCI bus address space (as in the case of the DW PCIe Endpoint prototype kit). In the former case dw_edma_region.paddr should be a dma_addr_t, while in the latter one it should be a pci_bus_addr_t. Since the corresponding CSRs are always 64 bits wide, convert dw_edma_region.paddr to be u64, and let the client make sure it has a valid address visible by the DW eDMA controller. For instance, the DW eDMA PCIe glue-driver initializes the field with addresses from the PCI bus memory space. [1] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port, v.5.40a, March 2019, p.1103 Link: https://lore.kernel.org/r/20230113171409.30470-4-Sergey.Semin@baikalelectronics.ru Fixes: 41aaff2a2ac0 ("dmaengine: Add Synopsys eDMA IP PCIe glue-logic") Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Vinod Koul <vkoul@kernel.org>
| * | dmaengine: dw-edma: Release requested IRQs on failureSerge Semin2023-01-271-4/+10
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If dw_edma_irq_request() fails to initialize an IRQ handler, any previously requested IRQs will be left initialized. Release the previously requested IRQs in the cleanup-on-error path of dw_edma_irq_request(). Link: https://lore.kernel.org/r/20230113171409.30470-3-Sergey.Semin@baikalelectronics.ru Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver") Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Vinod Koul <vkoul@kernel.org>
* | Merge tag 'mm-stable-2023-02-20-13-37' of ↵Linus Torvalds2023-02-231-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Daniel Verkamp has contributed a memfd series ("mm/memfd: add F_SEAL_EXEC") which permits the setting of the memfd execute bit at memfd creation time, with the option of sealing the state of the X bit. - Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset() thread-safe for pmd unshare") which addresses a rare race condition related to PMD unsharing. - Several folioification patch serieses from Matthew Wilcox, Vishal Moola, Sidhartha Kumar and Lorenzo Stoakes - Johannes Weiner has a series ("mm: push down lock_page_memcg()") which does perform some memcg maintenance and cleanup work. - SeongJae Park has added DAMOS filtering to DAMON, with the series "mm/damon/core: implement damos filter". These filters provide users with finer-grained control over DAMOS's actions. SeongJae has also done some DAMON cleanup work. - Kairui Song adds a series ("Clean up and fixes for swap"). - Vernon Yang contributed the series "Clean up and refinement for maple tree". - Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It adds to MGLRU an LRU of memcgs, to improve the scalability of global reclaim. - David Hildenbrand has added some userfaultfd cleanup work in the series "mm: uffd-wp + change_protection() cleanups". - Christoph Hellwig has removed the generic_writepages() library function in the series "remove generic_writepages". - Baolin Wang has performed some maintenance on the compaction code in his series "Some small improvements for compaction". - Sidhartha Kumar is doing some maintenance work on struct page in his series "Get rid of tail page fields". - David Hildenbrand contributed some cleanup, bugfixing and generalization of pte management and of pte debugging in his series "mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap PTEs". - Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation flag in the series "Discard __GFP_ATOMIC". - Sergey Senozhatsky has improved zsmalloc's memory utilization with his series "zsmalloc: make zspage chain size configurable". - Joey Gouly has added prctl() support for prohibiting the creation of writeable+executable mappings. The previous BPF-based approach had shortcomings. See "mm: In-kernel support for memory-deny-write-execute (MDWE)". - Waiman Long did some kmemleak cleanup and bugfixing in the series "mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF". - T.J. Alumbaugh has contributed some MGLRU cleanup work in his series "mm: multi-gen LRU: improve". - Jiaqi Yan has provided some enhancements to our memory error statistics reporting, mainly by presenting the statistics on a per-node basis. See the series "Introduce per NUMA node memory error statistics". - Mel Gorman has a second and hopefully final shot at fixing a CPU-hog regression in compaction via his series "Fix excessive CPU usage during compaction". - Christoph Hellwig does some vmalloc maintenance work in the series "cleanup vfree and vunmap". - Christoph Hellwig has removed block_device_operations.rw_page() in ths series "remove ->rw_page". - We get some maple_tree improvements and cleanups in Liam Howlett's series "VMA tree type safety and remove __vma_adjust()". - Suren Baghdasaryan has done some work on the maintainability of our vm_flags handling in the series "introduce vm_flags modifier functions". - Some pagemap cleanup and generalization work in Mike Rapoport's series "mm, arch: add generic implementation of pfn_valid() for FLATMEM" and "fixups for generic implementation of pfn_valid()" - Baoquan He has done some work to make /proc/vmallocinfo and /proc/kcore better represent the real state of things in his series "mm/vmalloc.c: allow vread() to read out vm_map_ram areas". - Jason Gunthorpe rationalized the GUP system's interface to the rest of the kernel in the series "Simplify the external interface for GUP". - SeongJae Park wishes to migrate people from DAMON's debugfs interface over to its sysfs interface. To support this, we'll temporarily be printing warnings when people use the debugfs interface. See the series "mm/damon: deprecate DAMON debugfs interface". - Andrey Konovalov provided the accurately named "lib/stackdepot: fixes and clean-ups" series. - Huang Ying has provided a dramatic reduction in migration's TLB flush IPI rates with the series "migrate_pages(): batch TLB flushing". - Arnd Bergmann has some objtool fixups in "objtool warning fixes". * tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits) include/linux/migrate.h: remove unneeded externs mm/memory_hotplug: cleanup return value handing in do_migrate_range() mm/uffd: fix comment in handling pte markers mm: change to return bool for isolate_movable_page() mm: hugetlb: change to return bool for isolate_hugetlb() mm: change to return bool for isolate_lru_page() mm: change to return bool for folio_isolate_lru() objtool: add UACCESS exceptions for __tsan_volatile_read/write kmsan: disable ftrace in kmsan core code kasan: mark addr_has_metadata __always_inline mm: memcontrol: rename memcg_kmem_enabled() sh: initialize max_mapnr m68k/nommu: add missing definition of ARCH_PFN_OFFSET mm: percpu: fix incorrect size in pcpu_obj_full_size() maple_tree: reduce stack usage with gcc-9 and earlier mm: page_alloc: call panic() when memoryless node allocation fails mm: multi-gen LRU: avoid futile retries migrate_pages: move THP/hugetlb migration support check to simplify code migrate_pages: batch flushing TLB migrate_pages: share more code between _unmap and _move ...
| * | mm: replace vma->vm_flags direct modifications with modifier callsSuren Baghdasaryan2023-02-091-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace direct modifications to vma->vm_flags with calls to modifier functions to be able to track flag changes and to keep vma locking correctness. [akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo] Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjun Roy <arjunroy@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Oskolkov <posk@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* | Merge tag 'arm-boardfile-remove-6.3' of ↵Linus Torvalds2023-02-204-1446/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC boardfile updates from Arnd Bergmann "Unused boardfile removal for 6.3 This is a follow-up to the deprecation of most of the old-style board files that was merged in linux-6.0, removing them for good. This branch is almost exclusively dead code removal based on those annotations. Some device driver removals went through separate subsystem trees, but the majority is in the same branch, in order to better handle dependencies between the patches and avoid breaking bisection. Unfortunately that leads to merge conflicts against other changes in the subsystem trees, but they should all be trivial to resolve by removing the files. See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the description of which machines were marked unused and are now removed. The only removals that got postponed are Terastation WXL (mv78xx0) and Jornada720 (StrongARM1100), which turned out to still have potential users" * tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits) mmc: omap: drop TPS65010 dependency ARM: pxa: restore mfp-pxa320.h usb: ohci-omap: avoid unused-variable warning ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs ARM: s3c: remove obsolete s3c-cpu-freq header MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal ARM: remove CONFIG_UNUSED_BOARD_FILES mfd: remove htc-pasic3 driver w1: remove ds1wm driver usb: remove ohci-tmio driver fbdev: remove w100fb driver fbdev: remove tmiofb driver mmc: remove tmio_mmc driver mfd: remove ucb1400 support mfd: remove toshiba tmio drivers rtc: remove v3020 driver power: remove pda_power supply driver ASoC: pxa: remove unused board support pcmcia: remove unused pxa/sa1100 drivers ...
| * | dmaengine: remove s3c24xx driverArnd Bergmann2023-01-163-1441/+0
| | | | | | | | | | | | | | | | | | | | | | | | The s3c24xx platform was removed and this driver is no longer needed. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | ARM: mmp: remove custom sram codeArnd Bergmann2023-01-161-5/+2
| |/ | | | | | | | | | | | | | | | | The MMP_SRAM code is no longer used by the tdma driver because the Kconfig symbol is not selected, so remove it along with its former callsite. Acked-By: Vinod Koul <vkoul@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* | ptdma: pt_core_execute_cmd() should use spinlockEric Pilmore2023-01-192-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The interrupt handler (pt_core_irq_handler()) of the ptdma driver can be called from interrupt context. The code flow in this function can lead down to pt_core_execute_cmd() which will attempt to grab a mutex, which is not appropriate in interrupt context and ultimately leads to a kernel panic. The fix here changes this mutex to a spinlock, which has been verified to resolve the issue. Fixes: fa5d823b16a9 ("dmaengine: ptdma: Initial driver for the AMD PTDMA") Signed-off-by: Eric Pilmore <epilmore@gigaio.com> Link: https://lore.kernel.org/r/20230119033907.35071-1-epilmore@gigaio.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
* | dmaengine: tegra: Fix memory leak in terminate_all()Akhil R2023-01-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Terminate vdesc when terminating an ongoing transfer. This will ensure that the vdesc is present in the desc_terminated list The descriptor will be freed later in desc_free_list(). This fixes the memory leaks which can happen when terminating an ongoing transfer. Fixes: ee17028009d4 ("dmaengine: tegra: Add tegra gpcdma driver") Signed-off-by: Akhil R <akhilrajeev@nvidia.com> Link: https://lore.kernel.org/r/20230118115801.15210-1-akhilrajeev@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
* | dmaengine: xilinx_dma: call of_node_put() when breaking out of ↵Liu Shixin2023-01-181-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | for_each_child_of_node() Since for_each_child_of_node() will increase the refcount of node, we need to call of_node_put() manually when breaking out of the iteration. Fixes: 9cd4360de609 ("dma: Add Xilinx AXI Video Direct Memory Access Engine driver support") Signed-off-by: Liu Shixin <liushixin2@huawei.com> Acked-by: Peter Korsgaard <peter@korsgaard.com> Link: https://lore.kernel.org/r/20221122021612.1908866-1-liushixin2@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
* | dmaengine: imx-sdma: Fix a possible memory leak in sdma_transfer_initHui Wang2023-01-181-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the function sdma_load_context() fails, the sdma_desc will be freed, but the allocated desc->bd is forgot to be freed. We already met the sdma_load_context() failure case and the log as below: [ 450.699064] imx-sdma 30bd0000.dma-controller: Timeout waiting for CH0 ready ... In this case, the desc->bd will not be freed without this change. Signed-off-by: Hui Wang <hui.wang@canonical.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20221130090800.102035-1-hui.wang@canonical.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
* | dmaengine: Fix double increment of client_count in dma_chan_get()Koba Ko2023-01-181-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The first time dma_chan_get() is called for a channel the channel client_count is incorrectly incremented twice for public channels, first in balance_ref_count(), and again prior to returning. This results in an incorrect client count which will lead to the channel resources not being freed when they should be. A simple test of repeated module load and unload of async_tx on a Dell Power Edge R7425 also shows this resulting in a kref underflow warning. [ 124.329662] async_tx: api initialized (async) [ 129.000627] async_tx: api initialized (async) [ 130.047839] ------------[ cut here ]------------ [ 130.052472] refcount_t: underflow; use-after-free. [ 130.057279] WARNING: CPU: 3 PID: 19364 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110 [ 130.065811] Modules linked in: async_tx(-) rfkill intel_rapl_msr intel_rapl_common amd64_edac edac_mce_amd ipmi_ssif kvm_amd dcdbas kvm mgag200 drm_shmem_helper acpi_ipmi irqbypass drm_kms_helper ipmi_si syscopyarea sysfillrect rapl pcspkr ipmi_devintf sysimgblt fb_sys_fops k10temp i2c_piix4 ipmi_msghandler acpi_power_meter acpi_cpufreq vfat fat drm fuse xfs libcrc32c sd_mod t10_pi sg ahci crct10dif_pclmul libahci crc32_pclmul crc32c_intel ghash_clmulni_intel igb megaraid_sas i40e libata i2c_algo_bit ccp sp5100_tco dca dm_mirror dm_region_hash dm_log dm_mod [last unloaded: async_tx] [ 130.117361] CPU: 3 PID: 19364 Comm: modprobe Kdump: loaded Not tainted 5.14.0-185.el9.x86_64 #1 [ 130.126091] Hardware name: Dell Inc. PowerEdge R7425/02MJ3T, BIOS 1.18.0 01/17/2022 [ 130.133806] RIP: 0010:refcount_warn_saturate+0xba/0x110 [ 130.139041] Code: 01 01 e8 6d bd 55 00 0f 0b e9 72 9d 8a 00 80 3d 26 18 9c 01 00 75 85 48 c7 c7 f8 a3 03 9d c6 05 16 18 9c 01 01 e8 4a bd 55 00 <0f> 0b e9 4f 9d 8a 00 80 3d 01 18 9c 01 00 0f 85 5e ff ff ff 48 c7 [ 130.157807] RSP: 0018:ffffbf98898afe68 EFLAGS: 00010286 [ 130.163036] RAX: 0000000000000000 RBX: ffff9da06028e598 RCX: 0000000000000000 [ 130.170172] RDX: ffff9daf9de26480 RSI: ffff9daf9de198a0 RDI: ffff9daf9de198a0 [ 130.177316] RBP: ffff9da7cddf3970 R08: 0000000000000000 R09: 00000000ffff7fff [ 130.184459] R10: ffffbf98898afd00 R11: ffffffff9d9e8c28 R12: ffff9da7cddf1970 [ 130.191596] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 130.198739] FS: 00007f646435c740(0000) GS:ffff9daf9de00000(0000) knlGS:0000000000000000 [ 130.206832] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 130.212586] CR2: 00007f6463b214f0 CR3: 00000008ab98c000 CR4: 00000000003506e0 [ 130.219729] Call Trace: [ 130.222192] <TASK> [ 130.224305] dma_chan_put+0x10d/0x110 [ 130.227988] dmaengine_put+0x7a/0xa0 [ 130.231575] __do_sys_delete_module.constprop.0+0x178/0x280 [ 130.237157] ? syscall_trace_enter.constprop.0+0x145/0x1d0 [ 130.242652] do_syscall_64+0x5c/0x90 [ 130.246240] ? exc_page_fault+0x62/0x150 [ 130.250178] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 130.255243] RIP: 0033:0x7f6463a3f5ab [ 130.258830] Code: 73 01 c3 48 8b 0d 75 a8 1b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 45 a8 1b 00 f7 d8 64 89 01 48 [ 130.277591] RSP: 002b:00007fff22f972c8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 130.285164] RAX: ffffffffffffffda RBX: 000055b6786edd40 RCX: 00007f6463a3f5ab [ 130.292303] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055b6786edda8 [ 130.299443] RBP: 000055b6786edd40 R08: 0000000000000000 R09: 0000000000000000 [ 130.306584] R10: 00007f6463b9eac0 R11: 0000000000000206 R12: 000055b6786edda8 [ 130.313731] R13: 0000000000000000 R14: 000055b6786edda8 R15: 00007fff22f995f8 [ 130.320875] </TASK> [ 130.323081] ---[ end trace eff7156d56b5cf25 ]--- cat /sys/class/dma/dma0chan*/in_use would get the wrong result. 2 2 2 Fixes: d2f4f99db3e9 ("dmaengine: Rework dma_chan_get") Signed-off-by: Koba Ko <koba.ko@canonical.com> Reviewed-by: Jie Hai <haijie1@huawei.com> Test-by: Jie Hai <haijie1@huawei.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Joel Savitz <jsavitz@redhat.com> Link: https://lore.kernel.org/r/20221201030050.978595-1-koba.ko@canonical.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
* | dmaengine: tegra210-adma: fix global intr clearMohan Kumar2023-01-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | The current global interrupt clear programming register offset was not correct. Fix the programming with right offset Fixes: ded1f3db4cd6 ("dmaengine: tegra210-adma: prepare for supporting newer Tegra chips") Cc: stable@vger.kernel.org Signed-off-by: Mohan Kumar <mkumard@nvidia.com> Link: https://lore.kernel.org/r/20230102064844.31306-1-mkumard@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
* | Add exception protection processing for vd in axi_chan_handle_err functionShawn.Shao2023-01-181-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since there is no protection for vd, a kernel panic will be triggered here in exceptional cases. You can refer to the processing of axi_chan_block_xfer_complete function The triggered kernel panic is as follows: [ 67.848444] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060 [ 67.848447] Mem abort info: [ 67.848449] ESR = 0x96000004 [ 67.848451] EC = 0x25: DABT (current EL), IL = 32 bits [ 67.848454] SET = 0, FnV = 0 [ 67.848456] EA = 0, S1PTW = 0 [ 67.848458] Data abort info: [ 67.848460] ISV = 0, ISS = 0x00000004 [ 67.848462] CM = 0, WnR = 0 [ 67.848465] user pgtable: 4k pages, 48-bit VAs, pgdp=00000800c4c0b000 [ 67.848468] [0000000000000060] pgd=0000000000000000, p4d=0000000000000000 [ 67.848472] Internal error: Oops: 96000004 [#1] SMP [ 67.848475] Modules linked in: dmatest [ 67.848479] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.100-emu_x2rc+ #11 [ 67.848483] pstate: 62000085 (nZCv daIf -PAN -UAO +TCO BTYPE=--) [ 67.848487] pc : axi_chan_handle_err+0xc4/0x230 [ 67.848491] lr : axi_chan_handle_err+0x30/0x230 [ 67.848493] sp : ffff0803fe55ae50 [ 67.848495] x29: ffff0803fe55ae50 x28: ffff800011212200 [ 67.848500] x27: ffff0800c42c0080 x26: ffff0800c097c080 [ 67.848504] x25: ffff800010d33880 x24: ffff80001139d850 [ 67.848508] x23: ffff0800c097c168 x22: 0000000000000000 [ 67.848512] x21: 0000000000000080 x20: 0000000000002000 [ 67.848517] x19: ffff0800c097c080 x18: 0000000000000000 [ 67.848521] x17: 0000000000000000 x16: 0000000000000000 [ 67.848525] x15: 0000000000000000 x14: 0000000000000000 [ 67.848529] x13: 0000000000000000 x12: 0000000000000040 [ 67.848533] x11: ffff0800c0400248 x10: ffff0800c040024a [ 67.848538] x9 : ffff800010576cd4 x8 : ffff0800c0400270 [ 67.848542] x7 : 0000000000000000 x6 : ffff0800c04003e0 [ 67.848546] x5 : ffff0800c0400248 x4 : ffff0800c4294480 [ 67.848550] x3 : dead000000000100 x2 : dead000000000122 [ 67.848555] x1 : 0000000000000100 x0 : ffff0800c097c168 [ 67.848559] Call trace: [ 67.848562] axi_chan_handle_err+0xc4/0x230 [ 67.848566] dw_axi_dma_interrupt+0xf4/0x590 [ 67.848569] __handle_irq_event_percpu+0x60/0x220 [ 67.848573] handle_irq_event+0x64/0x120 [ 67.848576] handle_fasteoi_irq+0xc4/0x220 [ 67.848580] __handle_domain_irq+0x80/0xe0 [ 67.848583] gic_handle_irq+0xc0/0x138 [ 67.848585] el1_irq+0xc8/0x180 [ 67.848588] arch_cpu_idle+0x14/0x2c [ 67.848591] default_idle_call+0x40/0x16c [ 67.848594] do_idle+0x1f0/0x250 [ 67.848597] cpu_startup_entry+0x2c/0x60 [ 67.848600] rest_init+0xc0/0xcc [ 67.848603] arch_call_rest_init+0x14/0x1c [ 67.848606] start_kernel+0x4cc/0x500 [ 67.848610] Code: eb0002ff 9a9f12d6 f2fbd5a2 f2fbd5a3 (a94602c1) [ 67.848613] ---[ end trace 585a97036f88203a ]--- Signed-off-by: Shawn.Shao <shawn.shao@jaguarmicro.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230112055802.1764-1-shawn.shao@jaguarmicro.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
* | dmaengine: lgm: Move DT parsing after initializationPeter Harliman Liem2023-01-181-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ldma_cfg_init() will parse DT to retrieve certain configs. However, that is called before ldma_dma_init_vXX(), which will make some initialization to channel configs. It will thus incorrectly overwrite certain configs that are declared in DT. To fix that, we move DT parsing after initialization. Function name is renamed to better represent what it does. Fixes: 32d31c79a1a4 ("dmaengine: Add Intel LGM SoC DMA support.") Signed-off-by: Peter Harliman Liem <pliem@maxlinear.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/afef6fc1ed20098b684e0d53737d69faf63c125f.1672887183.git.pliem@maxlinear.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
* | dmaengine: ti: k3-udma: Do conditional decrement of UDMA_CHAN_RT_PEER_BCNT_REGJayesh Choudhary2022-12-281-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | PSIL_EP_NATIVE endpoints may not have PEER registers for BCNT and thus udma_decrement_byte_counters() should not try to decrement these counters. This fixes the issue of crypto IPERF testing where the client side (EVM) hangs without transfer of packets to the server side, seen since this function was added. Fixes: 7c94dcfa8fcf ("dmaengine: ti: k3-udma: Reset UDMA_CHAN_RT byte counters to prevent overflow") Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20221128085005.489964-1-j-choudhary@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
* | dmaengine: idxd: Do not call DMX TX callbacks during workqueue disableReinette Chatre2022-12-281-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On driver unload any pending descriptors are flushed and pending DMA descriptors are explicitly completed: idxd_dmaengine_drv_remove() -> drv_disable_wq() -> idxd_wq_free_irq() -> idxd_flush_pending_descs() -> idxd_dma_complete_txd() With this done during driver unload any remaining descriptor is likely stuck and can be dropped. Even so, the descriptor may still have a callback set that could no longer be accessible. An example of such a problem is when the dmatest fails and the dmatest module is unloaded. The failure of dmatest leaves descriptors with dma_async_tx_descriptor::callback pointing to code that no longer exist. This causes a page fault as below at the time the IDXD driver is unloaded when it attempts to run the callback: BUG: unable to handle page fault for address: ffffffffc0665190 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page Fix this by clearing the callback pointers on the transmit descriptors only when workqueue is disabled. Fixes: 403a2e236538 ("dmaengine: idxd: change MSIX allocation based on per wq activation") Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Fenghua Yu <fenghua.yu@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/37d06b772aa7f8863ca50f90930ea2fd80b38fc3.1670452419.git.reinette.chatre@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
* | dmaengine: idxd: Prevent use after free on completion memoryReinette Chatre2022-12-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On driver unload any pending descriptors are flushed at the time the interrupt is freed: idxd_dmaengine_drv_remove() -> drv_disable_wq() -> idxd_wq_free_irq() -> idxd_flush_pending_descs(). If there are any descriptors present that need to be flushed this flow triggers a "not present" page fault as below: BUG: unable to handle page fault for address: ff391c97c70c9040 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page The address that triggers the fault is the address of the descriptor that was freed moments earlier via: drv_disable_wq()->idxd_wq_free_resources() Fix the use after free by freeing the descriptors after any possible usage. This is done after idxd_wq_reset() to ensure that the memory remains accessible during possible completion writes by the device. Fixes: 63c14ae6c161 ("dmaengine: idxd: refactor wq driver enable/disable operations") Suggested-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Fenghua Yu <fenghua.yu@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/6c4657d9cff0a0a00501a7b928297ac966e9ec9d.1670452419.git.reinette.chatre@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
* | dmaengine: idxd: Let probe fail when workqueue cannot be enabledReinette Chatre2022-12-281-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The workqueue is enabled when the appropriate driver is loaded and disabled when the driver is removed. When the driver is removed it assumes that the workqueue was enabled successfully and proceeds to free allocations made during workqueue enabling. Failure during workqueue enabling does not prevent the driver from being loaded. This is because the error path within drv_enable_wq() returns success unless a second failure is encountered during the error path. By returning success it is possible to load the driver even if the workqueue cannot be enabled and allocations that do not exist are attempted to be freed during driver remove. Some examples of problematic flows: (a) idxd_dmaengine_drv_probe() -> drv_enable_wq() -> idxd_wq_request_irq(): In above flow, if idxd_wq_request_irq() fails then idxd_wq_unmap_portal() is called on error exit path, but drv_enable_wq() returns 0 because idxd_wq_disable() succeeds. The driver is thus loaded successfully. idxd_dmaengine_drv_remove()->drv_disable_wq()->idxd_wq_unmap_portal() Above flow on driver unload triggers the WARN in devm_iounmap() because the device resource has already been removed during error path of drv_enable_wq(). (b) idxd_dmaengine_drv_probe() -> drv_enable_wq() -> idxd_wq_request_irq(): In above flow, if idxd_wq_request_irq() fails then idxd_wq_init_percpu_ref() is never called to initialize the percpu counter, yet the driver loads successfully because drv_enable_wq() returns 0. idxd_dmaengine_drv_remove()->__idxd_wq_quiesce()->percpu_ref_kill(): Above flow on driver unload triggers a BUG when attempting to drop the initial ref of the uninitialized percpu ref: BUG: kernel NULL pointer dereference, address: 0000000000000010 Fix the drv_enable_wq() error path by returning the original error that indicates failure of workqueue enabling. This ensures that the probe fails when an error is encountered and the driver remove paths are only attempted when the workqueue was enabled successfully. Fixes: 1f2bb40337f0 ("dmaengine: idxd: move wq_enable() to device.c") Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Fenghua Yu <fenghua.yu@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/e8d8116e5efa0fd14fadc5adae6ffd319f0e5ff1.1670452419.git.reinette.chatre@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
* | dmaengine: qcom: gpi: Set link_rx bit on GO TRE for rx operationVijaya Krishna Nivarthi2022-12-281-0/+1
|/ | | | | | | | | | | | | | | | Rx operation on SPI GSI DMA is currently not working. As per GSI spec, link_rx bit is to be set on GO TRE on tx channel whenever there is going to be a DMA TRE on rx channel. This is currently set for duplex operation only. Set the bit for rx operation as well. This is part of changes required to bring up Rx. Fixes: 94b8f0e58fa1 ("dmaengine: qcom: gpi: set chain and link flag for duplex") Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/1671212293-14767-1-git-send-email-quic_vnivarth@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
* Merge tag 'dmaengine-6.2-rc1' of ↵Linus Torvalds2022-12-1921-3936/+1228
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "New support: - Qualcomm SDM670, SM6115 and SM6375 GPI controller support - Ingenic JZ4755 dmaengine support - Removal of iop-adma driver Updates: - Tegra support for dma-channel-mask - at_hdmac cleanup and virt-chan support for this driver" * tag 'dmaengine-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (46 commits) dmaengine: Revert "dmaengine: remove s3c24xx driver" dmaengine: tegra: Add support for dma-channel-mask dt-bindings: dmaengine: Add dma-channel-mask to Tegra GPCDMA dmaengine: idxd: Remove linux/msi.h include dt-bindings: dmaengine: qcom: gpi: add compatible for SM6375 dmaengine: idxd: Fix crc_val field for completion record dmaengine: at_hdmac: Convert driver to use virt-dma dmaengine: at_hdmac: Remove unused member of at_dma_chan dmaengine: at_hdmac: Rename "chan_common" to "dma_chan" dmaengine: at_hdmac: Rename "dma_common" to "dma_device" dmaengine: at_hdmac: Use bitfield access macros dmaengine: at_hdmac: Keep register definitions and structures private to at_hdmac.c dmaengine: at_hdmac: Set include entries in alphabetic order dmaengine: at_hdmac: Use pm_ptr() dmaengine: at_hdmac: Use devm_clk_get() dmaengine: at_hdmac: Use devm_platform_ioremap_resource dmaengine: at_hdmac: Use devm_kzalloc() and struct_size() dmaengine: at_hdmac: Introduce atc_get_llis_residue() dmaengine: at_hdmac: s/atc_get_bytes_left/atc_get_residue dmaengine: at_hdmac: Pass residue by address to avoid unnecessary implicit casts ...
| * dmaengine: Revert "dmaengine: remove s3c24xx driver"Vinod Koul2022-12-023-0/+1441
| | | | | | | | | | | | | | This reverts cccc46ae3623 ("dmaengine: remove s3c24xx driver") as it causes regression due to missing header Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * dmaengine: tegra: Add support for dma-channel-maskAkhil R2022-11-141-7/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for dma-channel-mask so that only the specified channels are used. This helps to reserve some channels for the firmware. This was initially achieved by limiting the channel number to 31 in the driver and adjusting the register address to skip channel0 which was reserved for a firmware. This is wrong and does not align with the hardware. Now, with this change, the driver can align more to the actual hardware which has 32 channels. But this implies that there will be a break in the ABI and the device tree need to be updated along with this change for the driver to pickup the right interrupt corresponding to the channel Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/all/Y2EFoG1H9YpfxRjs@orome/ Signed-off-by: Akhil R <akhilrajeev@nvidia.com> Link: https://lore.kernel.org/r/20221110171748.40304-4-akhilrajeev@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * dmaengine: idxd: Remove linux/msi.h includeThomas Gleixner2022-11-141-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | Nothing in this file needs anything from linux/msi.h Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: dmaengine@vger.kernel.org Link: https://lore.kernel.org/r/20221113202428.573536003@linutronix.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * dmaengine: at_hdmac: Convert driver to use virt-dmaTudor Ambarus2022-11-112-706/+403
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert the driver to use the core virt-dma. The driver will be easier to maintain as it uses the list handling and the tasklet from virt-dma. With the conversion replace the election of a new transfer in the tasklet with the election of the new transfer in the interrupt handler. With this we have a shorter idle window as we remove the scheduling latency of the tasklet. I chose to do this while doing the conversion to virt-dma, because if I made a prerequisite patch with the new transfer election in the irq handler, I would have to duplicate some virt-dma code in the at_hdmac driver that would end up being removed at the virt-dma conversion anyway. So do this in a single step. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-33-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * dmaengine: at_hdmac: Remove unused member of at_dma_chanTudor Ambarus2022-11-111-2/+0
| | | | | | | | | | | | | | | | | | | | The pointer to at_dma engine was never used, remove it. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-32-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * dmaengine: at_hdmac: Rename "chan_common" to "dma_chan"Tudor Ambarus2022-11-111-31/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | "chan_common" was misleading and did not suggest that's actually a struct dma_chan underneath. Rename it so that readers can follow the code easier. One may see some checks when running checkpatch. Those have nothing to do with the rename and will be addressed in a further patch. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-31-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * dmaengine: at_hdmac: Rename "dma_common" to "dma_device"Tudor Ambarus2022-11-111-46/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | "dma_common" name was misleading and did not suggest that's actually a struct dma_device underneath. Rename it so that readers can follow the code easier. One may see some checks and a warning when running checkpatch. Those have nothing to do with the rename and will be addressed in a further patch. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-30-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * dmaengine: at_hdmac: Use bitfield access macrosTudor Ambarus2022-11-111-210/+198
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the bitfield access macros in order to clean and to make the driver easier to read. One will see some "line length exceeds 100 columns" checkpatch warnings. I chose to not introduce new lines for regs descriptions in order to preserve the style of the comments throughout the definitions. Style can be fixed in a further patch. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-29-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * dmaengine: at_hdmac: Keep register definitions and structures private to ↵Tudor Ambarus2022-11-112-479/+468
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | at_hdmac.c Do not expose register definitions, structures and helpers via a .h file because there are used only by at_hdmac.c. Since there are no other users, remove the ambiguity and move all the .h contents to the .c file. One may notice some checkpatch warnings and errors with this move. The move was done "as it was", checkpatch complaints can be fixed in a further patch. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-28-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * dmaengine: at_hdmac: Set include entries in alphabetic orderTudor Ambarus2022-11-111-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | It's a good practice to set the include entries in alphabetic order. It helps humans to read the code easier. Alphabetic order should also prove that each header is self-contained, i.e. can be included without prerequisites. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-27-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * dmaengine: at_hdmac: Use pm_ptr()Tudor Ambarus2022-11-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Use pm_ptr() macro to fill at_dma_driver.driver.pm. In case CONFIG_PM is not enabled, the macro will return NULL. When NULL, at_dma_dev_pm_ops will end up being unused, so prepend it with the __maybe_unused attribute. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-26-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * dmaengine: at_hdmac: Use devm_clk_get()Tudor Ambarus2022-11-111-5/+2
| | | | | | | | | | | | | | | | | | | | | | Clocks that are get with this method will be automatically put on driver detach. Use devm_clk_get() and simplify the error handling. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-25-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * dmaengine: at_hdmac: Use devm_platform_ioremap_resourceTudor Ambarus2022-11-111-31/+6
| | | | | | | | | | | | | | | | | | | | | | Use devm_platform_ioremap_resource() helper for cleanner code and easier resource management. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-24-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * dmaengine: at_hdmac: Use devm_kzalloc() and struct_size()Tudor Ambarus2022-11-111-14/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the resource-managed kzalloc to simplify error logic. Memory allocated with this function is automatically freed on driver detach. Use struct_size() helper to calculate the size of the atdma structure with its trailing flexible array. While here, move the mem allocation higher in the probe method, as failing to allocate memory indicates a serious system issue, and everything else does not matter anyway. All these help the code look a bit cleaner. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-23-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * dmaengine: at_hdmac: Introduce atc_get_llis_residue()Tudor Ambarus2022-11-111-111/+110
| | | | | | | | | | | | | | | | | | | | | | Introduce a method to get the residue for a hardware linked list transfer. It makes the code easier to read. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-22-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * dmaengine: at_hdmac: s/atc_get_bytes_left/atc_get_residueTudor Ambarus2022-11-111-7/+4
| | | | | | | | | | | | | | | | | | | | | | | | Use dmaengine terminology and rename the method to better indicate what it does: it gets the residue value which will be later on set with dma_set_residue(). Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-21-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * dmaengine: at_hdmac: Pass residue by address to avoid unnecessary implicit castsTudor Ambarus2022-11-111-24/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | struct dma_tx_state defines residue as u32. atc_get_bytes_left() returned an int which could be either an error or the value of the residue. This could cause problems if the controller supported a u32 buffer transfer size and the u32 value was past the max int can hold. Our controller does not support u32 buffer transfer size, but even so, improve the code and pass the residue by address to avoid unnecessary implicit casts and make atc_get_bytes_left() return 0 on success or -errno on errors. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-20-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * dmaengine: at_hdmac: Remove superfluous castTudor Ambarus2022-11-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | Conversions of void * are applied automatically when other pointer types are assigned to and from void *. Remove the superfluous cast. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-19-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * dmaengine: at_hdmac: Return dma_cookie_status()'s ret code when txstate is NULLTudor Ambarus2022-11-111-7/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | txstate is an optional parameter used to get a struct with auxilary transfer status information. When not provided the call to device_tx_status() should return the status of the dma cookie. Return the status of dma cookie when the txstate optional parameter is not provided. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-18-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * dmaengine: at_hdmac: Do not print messages on console while holding the lockTudor Ambarus2022-11-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | The descriptor was already removed from the transfer list, there's no reason to keep the channel lock while printing desc info, thus do the prints without holding the lock. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20221025090306.297886-1-tudor.ambarus@microchip.com Link: https://lore.kernel.org/r/20221025090306.297886-17-tudor.ambarus@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * Merge branch 'fixes' into nextVinod Koul2022-11-1113-121/+149
| |\ | | | | | | | | | Merge due to at_hdmac driver dependency
| * | dmaengine: idxd: Make read buffer sysfs attributes invisible for Intel IAAXiaochen Shen2022-11-041-0/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In current code, the following sysfs attributes are exposed to user to show or update the values: max_read_buffers (max_tokens) read_buffer_limit (token_limit) group/read_buffers_allowed (group/tokens_allowed) group/read_buffers_reserved (group/tokens_reserved) group/use_read_buffer_limit (group/use_token_limit) >From Intel IAA spec [1], Intel IAA does not support Read Buffer allocation control. So these sysfs attributes should not be supported on IAA device. Fix this issue by making these sysfs attributes invisible through is_visible() filter when the device is IAA. Add description in the ABI documentation to mention that these attributes are not visible when the device does not support Read Buffer allocation control. [1]: https://cdrdv2.intel.com/v1/dl/getContent/721858 Fixes: fde212e44f45 ("dmaengine: idxd: deprecate token sysfs attributes for read buffers") Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver") Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20221022074949.11719-1-xiaochen.shen@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * | dmaengine: sh: Remove unused shdma-arm.hStephen Kitt2022-11-041-48/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | shdma-arm.h was introduced with commit 1e69653d40f1 ("DMA: shdma: add r8a73a4 DMAC data to the device ID table"), and its sole user was removed with commit a19788612f51 ("dmaengine: sh: Remove R-Mobile APE6 support"). The latter mentions r8a73a4.dtsi but shdma support was removed from that with commit cfda82037780 ("ARM: dts: r8a73a4: Remove non-functional DMA support"), so it seems this is safe to remove. Signed-off-by: Stephen Kitt <steve@sk2.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20221028115336.1052782-1-steve@sk2.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * | dmaengine: xilinx_dma : add xilinx_dma_device_config() return documentationRadhey Shyam Pandey2022-11-041-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | document xilinx_dma_device_config() return value. Fixes below kernel-doc warning. xilinx_dma.c:1665: warning: No description found for return value of 'xilinx_dma_device_config' Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://lore.kernel.org/r/1666683737-7668-3-git-send-email-radhey.shyam.pandey@amd.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * | dmaengine: xilinx_dma: fix xilinx_dma_child_probe() return documentationRadhey Shyam Pandey2022-11-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Modify xilinx_dma_child_probe() return documentation to be inline with implementation i.e. can also return failure value on error. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://lore.kernel.org/r/1666683737-7668-2-git-send-email-radhey.shyam.pandey@amd.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * | dmaengine: remove s3c24xx driverArnd Bergmann2022-11-043-1441/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The s3c24xx platform was removed and this driver is no longer needed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221021203329.4143397-14-arnd@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * | dmaengine: remove iop-adma driverArnd Bergmann2022-10-194-2477/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The iop32x platform was removed, so this driver is no longer needed. Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/20221019150410.3851944-10-arnd@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * | dmaengine: apple-admac: Allocate cache SRAM to channelsMartin Povišer2022-10-191-1/+101
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's a previously unknown part of the controller interface: We have to assign SRAM carveouts to channels to store their in-flight samples in. So, obtain the size of the SRAM from a read-only register and divide it into 2K blocks for allocation to channels. The FIFO depths we configure will always fit into 2K. (This fixes audio artifacts during simultaneous playback/capture on multiple channels -- which looking back is fully accounted for by having had the caches in the DMA controller overlap in memory.) Fixes: b127315d9a78 ("dmaengine: apple-admac: Add Apple ADMAC driver") Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20221019132324.8585-2-povik+lin@cutebit.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
| * | dmaengine: idxd: Make max batch size attributes in sysfs invisible for Intel IAAXiaochen Shen2022-10-191-0/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In current code, dev.max_batch_size and wq.max_batch_size attributes in sysfs are exposed to user to show or update the values. >From Intel IAA spec [1], Intel IAA does not support batch processing. So these sysfs attributes should not be supported on IAA device. Fix this issue by making the attributes of max_batch_size invisible in sysfs through is_visible() filter when the device is IAA. Add description in the ABI documentation to mention that the attributes are not visible when the device does not support batch. [1]: https://cdrdv2.intel.com/v1/dl/getContent/721858 Fixes: e7184b159dd3 ("dmaengine: idxd: add support for configurable max wq batch size") Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver") Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Fenghua Yu <fenghua.yu@intel.com> Link: https://lore.kernel.org/r/20220930201528.18621-3-xiaochen.shen@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit v1.2.3 (git 2.46.0) at 2025-04-24 03:32:31 +0000