summaryrefslogtreecommitdiffstats
path: root/drivers/extcon
Commit message (Collapse)AuthorAgeFilesLines
* extcon: axp288: Handle reserved charger-type values betterHans de Goede2018-01-031-2/+2
| | | | | | | | | | According to the data sheets all the values not handled in the switch-case are "reserved". Update the dev_warn message to reflect this and set the cable-type to EXTCON_CHG_USB_SDP (so max 500mA current draw) as safe default. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: axp288: Redo charger type detection a couple of seconds after probe()Hans de Goede2018-01-031-2/+30
| | | | | | | | | | | | | | | | The axp288 extcon code depends on other drivers to do things like mux the data lines, enable/disable vbus based on the id-pin, etc. Sometimes the BIOS has not set these things up correctly resulting in the initial charger cable type detection giving a wrong result and we end up not charging or charging at only 0.5A. This commit starts a second charger-detection cycle a couple of seconds after the first one finishes, giving the other drivers time to load and do their thing. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* Merge branch 'ib-extcon-mfd-4.16' into extcon-nextChanwoo Choi2018-01-032-39/+142
|\
| * extcon: axp288: Remove unused platform dataHans de Goede2018-01-031-34/+1
| | | | | | | | | | | | | | | | | | This is not used / set anywhere in the tree. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
| * extcon: axp288: Remove unused extcon_nb struct memberHans de Goede2018-01-031-1/+0
| | | | | | | | | | | | | | Remove the unused extcon_nb struct member. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
| * extcon: axp288:: Handle return value of platform_get_irqArvind Yadav2018-01-031-0/+3
| | | | | | | | | | | | | | platform_get_irq() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
| * extcon: usbc-cros-ec: add support to notify USB type cables.Benson Leung2017-12-151-4/+138
| | | | | | | | | | | | | | | | | | | | | | Extend the driver to notify host and device type cables and the presence of power. Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* | extcon: adc-jack: Fix platform_get_irq's error checkingArvind Yadav2017-11-271-1/+1
| | | | | | | | | | | | | | | | | | The platform_get_irq() function returns negative if an error occurs. zero or positive number on success. platform_get_irq() error checking for zero is not correct. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* | extcon: max8997: Delete unneeded initialization in max8997_muic_set_path()Markus Elfring2017-11-271-1/+1
| | | | | | | | | | | | | | | | The variable "ret" will be set to an appropriate value a bit later. Thus this patch omits the explicit initialization at the beginning. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* | extcon: max77693: Delete unneeded initialization in max77693_muic_set_path()Markus Elfring2017-11-271-1/+1
|/ | | | | | | | The variable "ret" will be set to an appropriate value a bit later. Thus this patch omits the explicit initialization at the beginning. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* Merge tag 'usb-4.15-rc1' of ↵Linus Torvalds2017-11-1318-33/+98
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver updates for 4.15-rc1. There is the usual amount of gadget and xhci driver updates, along with phy and chipidea enhancements. There's also a lot of SPDX tags and license boilerplate cleanups as well, which provide some churn in the diffstat. Other major thing is the typec code that moved out of staging and into the "real" part of the drivers/usb/ tree, which was nice to see happen. All of these have been in linux-next with no reported issues for a while" * tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits) usb: gadget: f_fs: Fix use-after-free in ffs_free_inst USB: usbfs: compute urb->actual_length for isochronous usb: core: message: remember to reset 'ret' to 0 when necessary USB: typec: Remove remaining redundant license text USB: typec: add SPDX identifiers to some files USB: renesas_usbhs: rcar?.h: add SPDX tags USB: chipidea: ci_hdrc_tegra.c: add SPDX line USB: host: xhci-debugfs: add SPDX lines USB: add SPDX identifiers to all remaining Makefiles usb: host: isp1362-hcd: remove a couple of redundant assignments USB: adutux: remove redundant variable minor usb: core: add a new usb_get_ptm_status() helper usb: core: add a 'type' parameter to usb_get_status() usb: core: introduce a new usb_get_std_status() helper usb: core: rename usb_get_status() 'type' argument to 'recip' usb: core: add Status Type definitions USB: gadget: Remove redundant license text USB: gadget: function: Remove redundant license text USB: gadget: udc: Remove redundant license text USB: gadget: legacy: Remove redundant license text ...
| * extcon: max77843: Add support for SmartDock accessoryMarek Szyprowski2017-10-241-14/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SmartDock uses ADC_RESERVED_ACC_3 (0x10) ADC ID type and provides following features: 1. USB host with embedded USB hub (2-4 ports) for mice, keyboard, etc, 2. MHL for video output, 3. charging. Tested with Unitek Y-2165 MHL+OTG Hub Smart Phone Dock. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
| * extcon: max77843: Add OTG power control to the MUIC driverMarek Szyprowski2017-10-241-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enabling power on VBUS micro-usb pin is required only when passive OTG cable is connected. Initially OTG VBUS power control was planned to be done in charger driver. However such information is not really available from the extcon notifications, so VBUS power control has to be done directly in MUIC driver, which has all information about the attached accessory. For example SmartDock is externally powered accessory, provides OTG (USB HOST) functionality and use VBUS pin for charging a device battery, so the VBUS charging pump should be disabled in such case. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
| * extcon: max14577: Delete an unnecessary variable initialisation in ↵Markus Elfring2017-10-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | max14577_muic_set_path() The variable "ret" is immediately reassigned by a following statement. Thus omit the explicit initialisation at the beginning. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
| * extcon: make extcon_info static const, fixes warningColin Ian King2017-10-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | The array extcon_info is read only, local to the source and does not need to be in global scope, so make it static const. Cleans up sparse warning: symbol 'extcon_info' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
| * extcon: Split out extcon header file for consumer and provider deviceChanwoo Choi2017-10-2317-17/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The extcon has two type of extcon devices as following. - 'extcon provider deivce' adds new extcon device and detect the state/properties of external connector. Also, it notifies the state/properties to the extcon consumer device. - 'extcon consumer device' gets the change state/properties from extcon provider device. Prior to that, include/linux/extcon.h contains all exported API for both provider and consumer device driver. To clarify the meaning of header file and to remove the wrong use-case on consumer device, this patch separates into extcon.h and extcon-provider.h. [Description for include/linux/{extcon.h|extcon-provider.h}] - extcon.h includes the extcon API and data structure for extcon consumer device driver. This header file contains the following APIs: : Register/unregister the notifier to catch the change of extcon device : Get the extcon device instance : Get the extcon device name : Get the state of each external connector : Get the property value of each external connector : Get the property capability of each external connector - extcon-provider.h includes the extcon API and data structure for extcon provider device driver. This header file contains the following APIs: : Include 'include/linux/extcon.h' : Allocate the memory for extcon device instance : Register/unregister extcon device : Set the state of each external connector : Set the property value of each external connector : Set the property capability of each external connector Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
* | License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-022-0/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* extcon: max77693: Allow MHL attach notifierMaciej Purski2017-08-251-3/+2
| | | | | | | Without this patch extcon couldn't notify attaching MHL cable. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: Correct description to improve the readabilityChanwoo Choi2017-08-162-166/+158
| | | | | | | | | | | | | | | The extcon files explains the detailed operation for functions and what is meaning of extcon structure. There are different explanation even if the same argument. So, it modifies the description for both functions and structures in order to improve the readability and guide the role of functions more well. Also, this patch fixes the mismatching license info as a GPL v2 and removes the inactive author information. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: Remove unused CABLE_NAME_MAX definitionChanwoo Choi2017-08-161-1/+0
| | | | | | This patch removes the unused CABLE_NAME_MAX definition. Signed-off-by: Chanwoo Choi <cwchoi00@gmail.com>
* extcon: cros-ec: Fix a potential NULL pointer dereferenceChristophe JAILLET2017-08-071-0/+2
| | | | | | | | | Return -ENOMEM in case of memory allocation failure. This avoids a NULL pointer dereference. Fixes: c69831666109 ("extcon: cros-ec: Add extcon-cros-ec driver to support display out") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: Convert to using %pOF instead of full_nameRob Herring2017-07-191-2/+2
| | | | | | | | | Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* Merge remote-tracking branch 'origin/ib-extcon-mfd-4.14' into extcon-nextChanwoo Choi2017-07-173-0/+423
|\
| * extcon: cros-ec: Add extcon-cros-ec driver to support display outBenson Leung2017-07-173-0/+423
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the driver for the USB Type C cable detection mechanism built into the ChromeOS Embedded Controller on systems that have USB Type-C ports. At present, this allows for the presence of display out, but in future, it may also be used to notify host and device type cables and the presence of power. Signed-off-by: Benson Leung <bleung@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Chanwoo Choi <cw00.chio@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* | extcon: int3496: Constify acpi_device_idArvind Yadav2017-07-161-1/+1
|/ | | | | | | | | | | | | | | | | acpi_device_id are not supposed to change at runtime. All functions working with acpi_device_id provided by <acpi/acpi_bus.h> work with const acpi_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 1733 352 0 2085 825 drivers/extcon/extcon-intel-int3496.o File size After adding 'const': text data bss dec hex filename 1797 272 0 2069 815 drivers/extcon/extcon-intel-int3496.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: int3496: Switch to devm_acpi_dev_add_driver_gpios()Andy Shevchenko2017-06-121-4/+1
| | | | | | | | Switch to use managed variant of acpi_dev_add_driver_gpios() to simplify error path and fix potentially wrong assingment if ->probe() fails. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: qcom-spmi-misc: add dependency on ARCH_QCOMPeter Robinson2017-05-231-0/+1
| | | | | | | | Depend on the architecture the device actuall is in, also add dep on the compile test to ensure continued coverage. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: arizona: Use devm_kcalloc() in arizona_extcon_get_micd_configs()Markus Elfring2017-05-231-3/+1
| | | | | | | | | | | | | | * A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "devm_kcalloc". * Replace the specification of a data structure by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: Fix a typo in three comment linesMarkus Elfring2017-05-231-3/+3
| | | | | | | Adjust three words in this description for a function. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: Use devm_kcalloc() in extcon_dev_register()Markus Elfring2017-05-231-3/+2
| | | | | | | | | A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "devm_kcalloc". Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: Use BIT() macro for the left-shift operationChanwoo Choi2017-04-061-1/+1
| | | | | | This patch just uses the BIT() macro to make the code simple. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: intel-cht-wc: Ignore failure to detect charger-type on host mode exitHans de Goede2017-04-061-4/+11
| | | | | | | | | | | | | When we leave host-mode because the id-pin is no longer connected to ground, the 5v boost converter is normally still on, so we will see Vbus, but it is not from a charger (normally) so the charger-type detection will fail. This commit silences the cht_wc_extcon_get_charger() false-positive errors when we're leaving host mode. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: intel-cht-wc: Disable external 5v boost converter on probeHans de Goede2017-04-061-0/+35
| | | | | | | | | | | | | | | | | | | Disable the 5v boost converter on probe in case it was left on by the BIOS, this fixes 2 problems: 1) This gets seen by the external battery charger as a valid Vbus supply and it then tries to feed Vsys from this creating a feedback loop which causes aprox. 300 mA extra battery drain (and unless we drive the external-charger-disable pin high it also tries to charge the battery causing even more feedback). 2) This gets seen by the pwrsrc block as a SDP USB Vbus supply Since the external battery charger has its own 5v boost converter which does not have these issues, we simply turn the separate external 5v boost converter off and leave it off entirely. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: Remove porting compatibility of swich classChanwoo Choi2017-04-061-20/+0
| | | | | | | | This patch removes the porting compatibility for switch class because there is no any usage and requirement of swich class over a couple of years. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: intel-cht-wc: Add Intel Cherry Trail Whiskey Cove PMIC extcon driverHans de Goede2017-04-063-0/+361
| | | | | | | | Add a driver for charger detection / control on the Intel Cherrytrail Whiskey Cove PMIC. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: palmas: Don't miss GPIO events during suspend/resumeRoger Quadros2017-04-061-0/+6
| | | | | | | | The USB cable state can change during suspend/resume so be sure to check and update the extcon state. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: usb-gpio: Don't miss event during suspend/resumeRoger Quadros2017-04-061-3/+2
| | | | | | | | | | | We must check for ID/VBUS changes during resume irrespective of whether our device wakeup is enabled or not. Without this we seem to be missing ID/VBUS events after system suspend/resume. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: usb-gpio: Do not enable USB as wakeup source by defaultPeter Chen2017-04-061-1/+1
| | | | | | | | Whether the USB port as a wakeup source should be determined by user, but not enabled by default. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: arizona: Wait for any running HPDETs to complete on jack removalCharles Keepax2017-04-061-0/+46
| | | | | | | | | | As the HPDET can't be aborted mid way through we should not allow any new insertion to be processed until the previous HPDET has finished. It is very unlikely but with low enough debounce settings you could start a new HPDET before the old one has completed, which results in an erroneous reading. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* Merge branch 'ib-extcon-4.12' into HEADChanwoo Choi2017-04-063-0/+130
|\
| * extcon: Add new extcon_register_notifier_all() to monitor all external ↵Chanwoo Choi2017-04-043-0/+130
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | connectors The extcon core already provides the extcon_register_notifier() function in order to register the notifier block which is used to monitor the state change for the specific external connector such as EXTCON_USB, EXTCON_USB_HOST and so on. The extcon consumer uses the this function. The extcon consumer might need to monitor the all supported external connectors from the extcon device. In this case, The extcon consumer should have each notifier_block structure for each external connector. This patch adds the new extcon_register_notifier_all() function that extcon consumer is able to monitor the state change of all supported external connectors by using only one notifier_block structure. - List of new added functions: int extcon_register_notifier_all(struct extcon_dev *edev, struct notifier_block *nb); int extcon_unregister_notifier_all(struct extcon_dev *edev, struct notifier_block *nb); int devm_extcon_register_notifier_all(struct device *dev, struct extcon_dev *edev, struct notifier_block *nb); void devm_extcon_unregister_notifier_all(struct device *dev, struct extcon_dev *edev, struct notifier_block *nb); Suggested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
* | Revert "extcon: usb-gpio: add support for ACPI gpio interface"Andy Shevchenko2017-03-271-2/+1
|/ | | | | | | | | | | | The commit 942c7924a51e introduced a check for ACPI handle for the device that never appears on any ACPI-enabled platform so far. It seems a confusion with extcon-intel-int3496 which does support ACPI-enabled platforms. Revert commit 942c7924a51e to avoid any confusion in the future. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: int3496: Set the id pin to direction-input if necessaryHans de Goede2017-03-221-0/+3
| | | | | | | | | | | | | | | | | | | | With the new more strict ACPI gpio code the dsdt's IoRestriction flags are honored on gpiod_get, but in some dsdt's it is wrong, so explicitly call gpiod_direction_input on the id gpio if necessary. This fixes the following errors when the int3496 code is used together with the new more strict ACPI gpio code: [ 2382.484415] gpio gpiochip1: (INT33FF:01): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ [ 2382.484425] gpio gpiochip1: (INT33FF:01): unable to lock HW IRQ 3 for IRQ [ 2382.484429] genirq: Failed to request resources for INT3496:00 (irq 174) on irqchip chv-gpio [ 2382.484518] intel-int3496 INT3496:00: can't request IRQ for USB ID GPIO: -22 [ 2382.500359] intel-int3496: probe of INT3496:00 failed with error -22 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: int3496: Use gpiod_get instead of gpiod_get_indexHans de Goede2017-03-221-9/+3
| | | | | | | | | Now that we've an acpi mapping table we should be using gpiod_get instead of gpiod_get_index. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: int3496: Add dependency on X86 as it's Intel specificPeter Robinson2017-03-221-1/+1
| | | | | | | | Add dependency on X86 so it doesn't show up on other arches and add a option for compile test so it still gets build coverage. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: int3496: Add GPIO ACPI mapping tableAndy Shevchenko2017-03-221-0/+20
| | | | | | | | | | | | In order to make GPIO ACPI library stricter prepare users of gpiod_get_index() to correctly behave when there no mapping is provided by firmware. Here we add explicit mapping between _CRS GpioIo() resources and their names used in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: int3496: Rename GPIO pins in accordance with bindingAndy Shevchenko2017-03-221-2/+2
| | | | | | | | Update GPIO pin names in extcon-intel-int3496.c driver to follow the existing extcon binding. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* extcon: int3496: Propagate error code of gpiod_to_irq()Andy Shevchenko2017-03-131-2/+2
| | | | | | | | gpiod_to_irq() doesn't return 0. Thus, we just adjust condition and replace -EINVAL by actual error code it returns. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
* scripts/spelling.txt: add "swithc" pattern and fix typo instancesMasahiro Yamada2017-02-271-1/+1
| | | | | | | | | | | | | Fix typos and add the following to the scripts/spelling.txt: swithc||switch swithced||switched swithcing||switching Link: http://lkml.kernel.org/r/1481573103-11329-3-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* extcon: palmas: Use dev_dbg macro for the debug messagesRoger Quadros2017-01-251-8/+8
| | | | | | | | User is not interested in USB cable events appearing on the console. Use dev_dbg() instead of dev_info() for these events. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 07:01:16 +0000