summaryrefslogtreecommitdiffstats
path: root/drivers/gpio
Commit message (Collapse)AuthorAgeFilesLines
* gpio: gpio-generic: Add 16 and 32 bit big endian byte order supportAndreas Larsson2013-04-101-9/+47
| | | | | | | | | There is no general support for 64-bit big endian accesses, so that is left unsupported. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Acked-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: samsung: Add terminating entry for exynos_pinctrl_idsAxel Lin2013-03-271-0/+1
| | | | | | | | | The of_device_id table is supposed to be zero-terminated. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: mvebu: add dbg_show functionSimon Guinot2013-03-271-0/+59
| | | | | | | | | | This patch adds a dedicated dbg_show function to the gpio-mvebu driver. In addition to the generic gpiolib informations, this function displays informations related with the specific Marvell registers (blink enable, data in polarity, interrupt masks and cause). Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* MAX7301 GPIO: Do not force SPI speed when using OF PlatformChristophe Leroy2013-03-271-1/+2
| | | | | | | | | The bit_per_word can be set in the OF Device tree, so no need to force it as with the platform_data when using OF Platform Signed-off-by: Patrick Vasseur <patrick.vasseur@c-s.fr> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: gpio-tps65910.c: fix checkpatch errorLaurent Navet2013-03-271-1/+1
| | | | | | | | Fix : gpio/gpio-tps65910.c:136: ERROR: space required before the open parenthesis '(' Signed-off-by: Laurent Navet <laurent.navet@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: gpio-timberdale.c: fix checkpatch errorLaurent Navet2013-03-271-2/+1
| | | | | | | | Fix : gpio/gpio-timberdale.c:171: ERROR: else should follow close brace '}' Signed-off-by: Laurent Navet <laurent.navet@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: gpio-tc3589x.c: fix checkpatch errorsLaurent Navet2013-03-271-4/+4
| | | | | | | | | | | Fix : gpio/gpio-tc3589x.c:285: ERROR: code indent should use tabs where possible gpio/gpio-tc3589x.c:286: ERROR: code indent should use tabs where possible gpio/gpio-tc3589x.c:287: ERROR: code indent should use tabs where possible gpio/gpio-tc3589x.c:347: ERROR: code indent should use tabs where possible Signed-off-by: Laurent Navet <laurent.navet@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: gpio-stp-xway.c: fix checkpatch errorLaurent Navet2013-03-271-1/+1
| | | | | | | | Fix : gpio/gpio-stp-xway.c:220: ERROR: trailing whitespace Signed-off-by: Laurent Navet <laurent.navet@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: gpio-sch.c: fix checkpatch errorLaurent Navet2013-03-271-39/+35
| | | | | | | | | | Fix : gpio/gpio-sch.c:206: ERROR: switch and case should be at the same indent Also remove blank lines Signed-off-by: Laurent Navet <laurent.navet@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: gpio-pxa.c: fix checkpatch errorsLaurent Navet2013-03-271-2/+2
| | | | | | | | | Fix : gpio/gpio-pxa.c:605: ERROR: space required after that ',' (ctx:VxV) gpio/gpio-pxa.c:672: ERROR: space prohibited after that open parenthesis '(' Signed-off-by: Laurent Navet <laurent.navet@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: gpio-pca953x.c: fix checkpatch errorLaurent Navet2013-03-271-2/+1
| | | | | | | | Fix : gpio/gpio-pca953x.c:150: ERROR: else should follow close brace '}' Signed-off-by: Laurent Navet <laurent.navet@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: gpio-omap.c: fix checkpatch errorLaurent Navet2013-03-271-1/+1
| | | | | | | | | Fix : gpio/gpio-omap.c:697: ERROR: space required before the open parenthesis '(' Signed-off-by: Laurent Navet <laurent.navet@gmail.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: gpio-mvebu.c: fix checkpatch errorsLaurent Navet2013-03-271-13/+13
| | | | | | | | | | | | | | | | | | | | | Fix : gpio/gpio-mvebu.c:120: ERROR: space required before the open parenthesis '(' gpio/gpio-mvebu.c:136: ERROR: space required before the open parenthesis '(' gpio/gpio-mvebu.c:154: ERROR: space required before the open parenthesis '(' gpio/gpio-mvebu.c:404: ERROR: space required before the open parenthesis '(' gpio/gpio-mvebu.c:476: ERROR: "(foo*)" should be "(foo *)" gpio/gpio-mvebu.c:480: ERROR: "(foo*)" should be "(foo *)" gpio/gpio-mvebu.c:484: ERROR: "(foo*)" should be "(foo *)" gpio/gpio-mvebu.c:512: ERROR: space prohibited after that '!' (ctx:BxW) gpio/gpio-mvebu.c:518: ERROR: space prohibited after that '!' (ctx:BxW) gpio/gpio-mvebu.c:518: ERROR: space required before the open brace '{' gpio/gpio-mvebu.c:563: ERROR: space prohibited after that '!' (ctx:BxW) gpio/gpio-mvebu.c:570: ERROR: trailing whitespace gpio/gpio-mvebu.c:577: ERROR: space required before the open parenthesis '(' gpio/gpio-mvebu.c:635: ERROR: space prohibited after that '!' (ctx:BxW) Signed-off-by: Laurent Navet <laurent.navet@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: gpiolib-of.c: fix checkpatch errorLaurent Navet2013-03-271-1/+1
| | | | | | | | Fix : gpio/gpiolib-of.c:64: ERROR: code indent should use tabs where possible Signed-off-by: Laurent Navet <laurent.navet@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: mc33880: use spi_get_drvdata() and spi_set_drvdata()Jingoo Han2013-03-271-4/+4
| | | | | | | | | Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: 74x164: use spi_get_drvdata() and spi_set_drvdata()Jingoo Han2013-03-271-4/+4
| | | | | | | | | Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: mc33880: use dev_err() instead of printk()Jingoo Han2013-03-271-1/+2
| | | | | | | dev_err() is more preferred than printk(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: pcf857x: use devm_kzalloc()Jingoo Han2013-03-271-5/+2
| | | | | | | Use devm_kzalloc() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: mc33880: use devm_kzalloc()Jingoo Han2013-03-271-5/+3
| | | | | | | Use devm_kzalloc() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: max732x: use devm_kzalloc()Jingoo Han2013-03-271-3/+2
| | | | | | | Use devm_kzalloc() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: max7301: use devm_kzalloc()Jingoo Han2013-03-271-3/+1
| | | | | | | Use devm_kzalloc() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: max7300: use devm_kzalloc()Jingoo Han2013-03-271-3/+1
| | | | | | | Use devm_kzalloc() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: adp5520: use devm_kzalloc()Jingoo Han2013-03-271-3/+1
| | | | | | | Use devm_kzalloc() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio/vt8500: Convert to devm_ioremap_resource()Sachin Kamat2013-03-271-5/+3
| | | | | | | | | | | | | Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages; so all explicit error messages can be removed from the failure code paths. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: em: Make use of devm functionsMagnus Damm2013-03-271-34/+19
| | | | | | | | | Update the Emma Mobile GPIO driver to make use of devm functions. This simplifies the error handling and makes the code more compact. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio-lynxpoint: Add X86 dependency and io-port handling header.Mathias Nyman2013-03-272-1/+2
| | | | | | | | Lynxpoint gpio driver uses X86 specific io-ports to control gpios Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio/gpio-ich: make ichx_gpio_check_available() return a pure boolean valueMika Westerberg2013-03-271-1/+1
| | | | | | | | It is more readable for humans to use double-bang (!!) to convert the value to pure boolean before it is returned. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio-sch: Allow for more than 8 lines in the resume wellDarren Hart2013-03-271-10/+27
| | | | | | | | | | | The E6xx (TunnelCreek) CPUs have 9 GPIO lines in the resume well. Update the resume functions to allow for more than 8 GPIO lines, using the core functions as a template. Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Add TI TCA9554 to supported devices tableNikolay Balandin2013-03-271-0/+1
| | | | | | Signed-off-by: Nikolay Balandin <nbalandin@dev.rtsoft.ru> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: viperboard: Remove duplicate code to set gpio->gpiob_valAxel Lin2013-03-271-4/+0
| | | | | | | | | | Set it once is enough, and it's done in vprbrd_gpiob_set() which is called by vprbrd_gpiob_direction_output(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Lars Poeschel <poeschel@lemonage.de> Acked-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio-ich: Check for pin availability at request timeJean Delvare2013-03-271-12/+3
| | | | | | | | | | | | | Stop checking for pin availability in direction and get functions. These functions can be called repeatedly, so checking every time is bad for performance. Now that requesting GPIO pins is no longer optional, checking for availability at pin request time is enough. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio/em: Add Device Tree supportMagnus Damm2013-03-061-3/+42
| | | | | | | | | | | | | Update the Emma Mobile GPIO driver to add DT support. The patch simply adds a two-cell xlate function and updates the probe code to allow configuration via DT using the "ngpios" property plus OF id in the same style as gpio-mvebu.c. The code is also adjusted to use postcore_initcall() to force early setup. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* gpio/omap: warn if bank is not enabled on setting irq typeJon Hunter2013-03-061-0/+3
| | | | | | | | | | | | | | | For OMAP devices, if a gpio is being used as an interrupt source but has not been requested by calling gpio_request(), a call to request_irq() may cause the kernel hang because the gpio bank may be disabled and hence the register access will fail. To prevent such hangs, test for this case and warn if this is detected. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@linaro.org> Tested-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* gpio/omap: convert gpio irq domain to linear mappingJon Hunter2013-03-061-41/+31
| | | | | | | | | | | | | | | | | | | Currently the OMAP GPIO driver uses a legacy mapping for the GPIO IRQ domain. This is not necessary because we do not need to assign a specific interrupt number to the GPIO IRQ domain. Therefore, convert the OMAP GPIO driver to use a linear mapping instead. Please note that this also allows to simplify the logic in the OMAP gpio_irq_handler() routine, by using irq_find_mapping() to obtain the virtual irq number from the GPIO bank and bank index. Reported-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jon Hunter <jon-hunter@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@linaro.org> Tested-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* gpio/tegra: assume CONFIG_OFStephen Warren2013-03-041-6/+5
| | | | | | | | Tegra only supports, and always enables, device tree. Remove all ifdefs and runtime checks for DT support from the driver. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* gpio/gpio-ich: fix ichx_gpio_check_available() return what callers expectMika Westerberg2013-03-021-2/+2
| | | | | | | | | | | | | | | | | ichx_gpio_check_available() returns either 0 or -ENXIO depending on whether the given GPIO is available or not. However, callers of this function treat the return value as boolean: ... if (!ichx_gpio_check_available(gpio, nr)) return -ENXIO; which erroneusly fails when the GPIO is available and not vice versa. Fix this by making the function return boolean as expected by the callers. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* gpiolib: move comment to right functionAlexandre Courbot2013-03-021-1/+1
| | | | | | | This comment applies to gpio_to_chip(), not gpiod_to_chip(). Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* gpiolib: use const parameters when possibleAlexandre Courbot2013-03-021-13/+16
| | | | | | | | | Constify descriptor parameter of gpiod_* functions for those that should obviously not modify it. This includes value or direction get, cansleep, and IRQ number query. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* gpiolib: check descriptors validity before useAlexandre Courbot2013-03-021-47/+65
| | | | | | | | | | | | | Some functions dereferenced their GPIO descriptor argument without checking its validity first, potentially leading to an oops when given an invalid argument. This patch also makes gpio_get_value() more resilient when given an invalid GPIO, returning 0 instead of silently crashing. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Cc: Ryan Mallon <rmallon@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* gpio: convert to idr_alloc()Tejun Heo2013-02-271-8/+3
| | | | | | | | | | Convert to the much saner new idr interface. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds2013-02-2615-600/+1454
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull GPIO changes from Grant Likely: "This branch contains the usual set of individual driver improvements and bug fixes, as well as updates to the core code. The more notable changes include: - Internally add new API for referencing GPIOs by gpio_desc instead of number. Eventually this will become a public API - ACPI GPIO binding support" * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: (33 commits) arm64: select ARCH_WANT_OPTIONAL_GPIOLIB gpio: em: Use irq_domain_add_simple() to fix runtime error gpio: using common order: let 'static const' instead of 'const static' gpio/vt8500: memory cleanup missing gpiolib: Fix locking on gpio debugfs files gpiolib: let gpio_chip reference its descriptors gpiolib: use descriptors internally gpiolib: use gpio_chips list in gpiochip_find_base gpiolib: use gpio_chips list in sysfs ops gpiolib: use gpio_chips list in gpiochip_find gpiolib: use gpio_chips list in gpiolib_sysfs_init gpiolib: link all gpio_chips using a list gpio/langwell: cleanup driver gpio/langwell: Add Cloverview ids to pci device table gpio/lynxpoint: add chipset gpio driver. gpiolib: add missing braces in gpio_direction_show gpiolib-acpi: Fix error checks in interrupt requesting gpio: mpc8xxx: don't set IRQ_TYPE_NONE when creating irq mapping gpiolib: remove gpiochip_reserve() arm: pxa: tosa: do not use gpiochip_reserve() ...
| * gpio: em: Use irq_domain_add_simple() to fix runtime errorMagnus Damm2013-02-141-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adjust the gpio-em.c driver to reconsider the pdata->irq_base variable. Non-DT board code like for instance board-kzm9d.c needs to operate of a static IRQ range for platform devices. So this patch is updating the code to make use of the function irq_domain_add_simple() instead of irq_domain_add_linear(). Fixes a EMEV2 / KZM9D runtime error caused by the following commit: 7385500 gpio/em: convert to linear IRQ domain Cc: stable@kernel.org Signed-off-by: Magnus Damm <damm@opensource.se> Tested-by: Simon Horman <horms+renesas@verge.net.au> Reported-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * gpio: using common order: let 'static const' instead of 'const static'Chen Gang2013-02-111-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'const static ' is not a common order, better to use 'static const' instead. building: make EXTRA_CFLAGS=-W ARCH=arm drivers/gpio/gpio-omap.c:1479: warning: 'static' is not at beginning of declaration drivers/gpio/gpio-omap.c:1485: warning: 'static' is not at beginning of declaration drivers/gpio/gpio-omap.c:1491: warning: 'static' is not at beginning of declaration Signed-off-by: Chen Gang <gang.chen@asianux.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * gpio/vt8500: memory cleanup missingTony Prisk2013-02-111-12/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver is missing a .remove callback, and the fail path on probe is incomplete. If an error occurs in vt8500_add_chips, gpio_base is not unmapped. The driver is also ignoring the return value from this function so if a chip fails to register it completes as successful. Replaced pr_err with dev_err in vt8500_add_chips since the device is available. There is also no .remove callback defined so the function is added. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * gpiolib: Fix locking on gpio debugfs filesGrant Likely2013-02-111-3/+9
| | | | | | | | | | | | | | | | | | The debugfs files really need to hold the gpiolib spinlock before accessing the list. Otherwise chip addition/removal will cause an oops. Cc: Alexandre Courbot <acourbot@nvidia.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * gpiolib: let gpio_chip reference its descriptorsAlexandre Courbot2013-02-111-16/+23
| | | | | | | | | | | | | | | | | | | | | | Add a pointer to the gpio_chip structure that references the array of GPIO descriptors belonging to the chip, and update gpiolib code to use this pointer instead of the global gpio_desc[] array. This is another step towards the removal of the gpio_desc[] global array. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.orh> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * gpiolib: use descriptors internallyAlexandre Courbot2013-02-111-176/+338
| | | | | | | | | | | | | | | | | | | | | | | | Make sure gpiolib works internally with descriptors and (chip, offset) pairs instead of using the global integer namespace. This prepares the ground for the removal of the global gpio_desc[] array and the introduction of the descriptor-based GPIO API. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> [grant.likely: Squash in fix for link error when CONFIG_SYSFS=n] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * gpiolib: use gpio_chips list in gpiochip_find_baseAlexandre Courbot2013-02-091-21/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Re-implement gpiochip_find_base using the list of chips instead of the global gpio_desc[] array. This makes it both simpler and more efficient, and is needed to remove the global descriptors array. The new code should preserve the exact same GPIO number assignment policy as the code it is replacing. There shouldn't be any visible change to the assigned GPIO numbers. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> [grant.likely: Added comment about assignment policy] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * gpiolib: use gpio_chips list in sysfs opsAlexandre Courbot2013-02-091-27/+10
| | | | | | | | | | | | | | | | This makes the code both simpler and faster compared to parsing the GPIO number space. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * gpiolib: use gpio_chips list in gpiochip_findAlexandre Courbot2013-02-091-10/+7
| | | | | | | | | | | | | | | | | | Using the GPIO chips list is much faster than parsing the entire GPIO number space. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
generated by cgit v1.2.3 (git 2.25.1) at 2025-03-01 22:15:11 +0000