summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon/w83627hf.c
Commit message (Collapse)AuthorAgeFilesLines
* hwmon: (w83627hf) Don't touch nonexistent I2C address registersJean Delvare2012-12-191-2/+4
| | | | | | | | | Only the W83627HF could be accessed through I2C. All other supported chips are LPC-only, so they do not have I2C address registers. Don't write to nonexistent or reserved registers on these chips. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (w83627hf) Add support for suspendJean Delvare2012-12-191-1/+74
| | | | | | | | | | | | | On suspend some register values are lost, most notably the Value RAM areas but also other limits. Restore them on resume. On top of that, some fixups are needed to work around BIOS bugs, in particular when the BIOS omits running the same initialization sequence on resume that it does after boot. In that case we have to carry initialization over suspend. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: remove use of __devexitBill Pemberton2012-11-281-2/+2
| | | | | | | | | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Alistair John Strachan <alistair@devzero.co.uk> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Juerg Haefliger <juergh@gmail.com> Cc: Andreas Herrmann <herrmann.der.user@googlemail.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Jim Cromie <jim.cromie@gmail.com> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Roger Lucas <vt8231@hiddenengine.co.uk> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: remove use of __devinitBill Pemberton2012-11-281-4/+4
| | | | | | | | | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Alistair John Strachan <alistair@devzero.co.uk> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Juerg Haefliger <juergh@gmail.com> Cc: Andreas Herrmann <herrmann.der.user@googlemail.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Jim Cromie <jim.cromie@gmail.com> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Roger Lucas <vt8231@hiddenengine.co.uk> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: remove use of __devexit_pBill Pemberton2012-11-281-1/+1
| | | | | | | | | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Alistair John Strachan <alistair@devzero.co.uk> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Juerg Haefliger <juergh@gmail.com> Cc: Andreas Herrmann <herrmann.der.user@googlemail.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Jim Cromie <jim.cromie@gmail.com> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Roger Lucas <vt8231@hiddenengine.co.uk> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: Fix chip feature table headersJean Delvare2012-11-051-1/+1
| | | | | | | | | | These got broken by recent patches fixing checkpatch warnings in these drivers. The trick is that the patches themselves looked good, but the source files after applying them do not. That's why I am not a big fan of using tabs inside comments. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <linux@roeck-us.net>
* sections: Fix section conflicts in drivers/hwmonAndi Kleen2012-08-181-1/+1
| | | | | Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (w83627hf) Convert to use devm_ functionsGuenter Roeck2012-07-211-30/+16
| | | | | | | Convert to use devm_ functions to reduce code size and simplify the code. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (w83627hf) Fix checkpatch issuesGuenter Roeck2012-03-181-90/+174
| | | | | | | | | | | | | | Fixed: WARNING: simple_strtol is obsolete, use kstrtol instead WARNING: simple_strtoul is obsolete, use kstrtoul instead ERROR: do not use assignment in if condition Modify multi-line comments to follow Documentation/CodingStyle. Other checkpatch issues not fixed to reduce number of conflicts with pending rewrite as mfd driver. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: remove () used with returnFrans Meulenbroeks2012-03-181-4/+4
| | | | | | | | fix checkpatch ERROR: return is not a function, parentheses are not required Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
* module_param: make bool parameters really bool (drivers & misc)Rusty Russell2012-01-131-1/+1
| | | | | | | | | | | | module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* hwmon: (w83627hf) Use pr_fmt and pr_<level>Joe Perches2011-01-081-9/+8
| | | | | | | | | | Added #define pr_fmt KBUILD_MODNAME ": " fmt Converted printks to pr_<level> Coalesced any long formats Removed prefixes from formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
* hwmon: (w83627hf) Fix for "No such device"Christian Schulte2009-12-161-1/+1
| | | | | | | | | The commit b72656dbc491484765776a16eeb55ef2e90efea6 introduced a bug leading to the w83627hf_find function no longer finding any chips. Signed-off-by: Christian Schulte <cs@schulte.it> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (w83627hf) Stop using globals for I/O port numbersJean Delvare2009-12-091-43/+42
| | | | | | | | Stop using global variables REG and VAL for I/O port numbers. This is ugly and unsafe. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Rodolfo Giometti <giometti@linux.it>
* hwmon: (w83627hf) Drop the force_addr module parameterJean Delvare2009-12-091-11/+0
| | | | | | | | | | This module parameter is there to workaround broken BIOS. I'm not even sure if it was used in the past 5 years, and it gets in the way of converting the driver to the MFD infrastructure. So tell the users how they can do the same from user-space. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Rodolfo Giometti <giometti@linux.it>
* hwmon: Include <linux/io.h> instead of <asm/io.h>H Hartley Sweeten2009-09-151-1/+1
| | | | | | | | | | | | | | Drivers should be including <linux/io.h> instead of <asm/io.h>. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Alistair John Strachan <alistair@devzero.co.uk> Cc: Nicolas Boichat <nicolas@boichat.ch> Cc: Juerg Haefliger <juergh@gmail.com> Cc: Frank Seidel <frank@f-seidel.de> Acked-by: Jim Cromie <jim.cromie@gmail.com> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Roger Lucas <vt8231@hiddenengine.co.uk> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: Check for ACPI resource conflictsJean Delvare2009-01-071-0/+5
| | | | | | | | | | | | | | | | | | Check for ACPI resource conflicts in hwmon drivers. I've included all Super-I/O and PCI drivers. I've voluntarily left out: * Vendor-specific drivers: if they conflicted on any system, this would pretty much mean that they conflict on all systems, and we would know by now. * Legacy ISA drivers (lm78 and w83781d): they only support chips found on old designs were ACPI either wasn't supported or didn't deal with thermal management. * Drivers accessing the I/O resources indirectly (e.g. through SMBus): the checks are already done where they belong, i.e. in the bus drivers. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: David Hubbard <david.c.hubbard@gmail.com>
* hwmon: (w83627hf) Drop reset module parameterJean Delvare2008-08-061-27/+0
| | | | | | | | | | | | | | | Drop the reset parameter of the w83627hf driver. It seems it wasn't that useful. It was dropped from the Linux 2.4 version of this driver back in July 2004. The only users who have reported that they were still using this parameter, needed it to switch the chip from automatic fan speed control back to manual mode. Now that the driver creates pwmN_enable sysfs files, users will be able to use these files instead, which is way less agressive. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Dominik Geyer <dominik.geyer@gmx.de>
* hwmon: (w83627hf) Add pwm_enable sysfs interfaceDominik Geyer2008-08-061-0/+74
| | | | | | | Adds support for pwm_enable sysfs interface for the w83627hf driver. Signed-off-by: Dominik Geyer <dominik.geyer@gmx.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (w83627hf) Refactor beep enable handlingJean Delvare2008-02-071-51/+25
| | | | | | | | We can handle the beep enable bit as any other beep mask bit for slightly smaller code. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (w83627hf) Add individual alarm and beep filesJean Delvare2008-02-071-3/+139
| | | | | | | | | | The new libsensors needs these individual alarm and beep files. The code was copied from the w83781d driver. I've tested the alarm files on a W83627THF. I couldn't test the beep files as the system in question doesn't have a speaker. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (w83627hf) Enable VBAT monitoringJean Delvare2008-02-071-0/+5
| | | | | | | | | | | If VBAT monitoring is disabled, enable it. Bug reported on the lm-sensors trac system: http://lm-sensors.org/ticket/2282 This is the exact same patch that was applied to the w83627ehf driver 6 months ago. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: Let the user override the detected Super-I/O device IDJean Delvare2008-02-071-1/+5
| | | | | | | | | | | | | | | | | | | | | | | While it is possible to force SMBus-based hardware monitoring chip drivers to drive a not officially supported device, we do not have this possibility for Super-I/O-based drivers. That's unfortunate because sometimes newer chips are fully compatible and just forcing the driver to load would work. Instead of that we have to tell the users to recompile the kernel driver, which isn't an easy task for everyone. So, I propose that we add a module parameter to all Super-I/O based hardware monitoring drivers, letting advanced users force the driver to load on their machine. The user has to provide the device ID of a supposedly compatible device. This requires looking at the source code or a datasheet, so I am confident that users can't randomly force a driver without knowing what they are doing. Thus this should be relatively safe. As you can see from the code, the implementation is pretty simple and unintrusive. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (w83627hf) push nr+1 offset into *_REG_FAN macros and simplifyJim Cromie2007-11-081-13/+14
| | | | | | | | | | patch changes 2 macros to incorporate the +1, and drops the +1 from all the callers. This also allows a 'reroll' of an expanded loop, and adjusting indexes and loop limits on another. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (w83627hf) hoist nr-1 offset out of show-store-temp-XJim Cromie2007-11-081-84/+42
| | | | | | | | | | | | | | | | This hoists nr-1 offset out of (show|store)_temp_*(.*) callbacks, and into SENSOR_DEVICE_ATTRs for sysfs tempN_X files. It also combines temp[1] and temp_add[2] (array) fields in w83627hf_data into 3 elem arrays, which simplifies special-case handling of nr, allowing simplification of callback bodies and rerolling a flattened loop in w83627hf_update_device(struct device *dev). The array conversion changes temp[1] from u8 to u16, but this was happening implicitly via the helper functions anyway. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (w83627hf) don't assume bank 0Jean Delvare2007-10-131-22/+22
| | | | | | | | | | | | | | | | The bank switching code assumes that the bank selector is set to 0 when the driver is loaded. This might not be the case. This is exactly the same bug as was fixed in the w83627ehf driver two months ago: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=0956895aa6f8dc6a33210967252fd7787652537d In practice, this bug was causing the sensor thermal types to be improperly reported for my W83627THF the first time I was loading the w83627hf driver. From the driver history, I'd say that it has been broken since September 2005 (when we stopped resetting the chip by default at driver load.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (w83627hf) Fix setting fan min right after driver loadJean Delvare2007-10-131-12/+22
| | | | | | | | | | We need to read the fan clock dividers at initialization time, otherwise the code in store_fan_min() may use uninitialized values. That's pretty much the same bug and same fix as for the w83627ehf driver last month. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (w83627hf) De-macro sysfs callback functionsJim Cromie2007-10-131-359/+342
| | | | | | | | | | This patch to drivers/hwmon/w83627hf converts many sysfs items from DEVICE_ATTRs to SENSOR_DEVICE_ATTRs, and replaces macros which expand to define redundant callbacks, with callbacks which use the SENSOR_DEV.nr to know what to do. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: VRM is not read from registersJean Delvare2007-10-091-1/+1
| | | | | | | | | | The VRM value is not read from chip registers, so there's no need to update the device data cache before exporting the VRM value to user-space. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: Convert from class_device to deviceTony Jones2007-10-091-5/+5
| | | | | | | | | Convert from class_device to device for hwmon_device_register/unregister Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: Don't export thermistor betaJean Delvare2007-10-091-9/+10
| | | | | | | | | Deprecate the use of thermistor beta values as thermal sensor types. No driver supports changing the beta value anyway. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: Allow writing of negative trigger temperaturesChristian Hohnstaedt2007-10-091-3/+3
| | | | | | | | | - replace differing temperature variable types by long - use strtol() instead of strtoul() for conversion Signed-off-by: Christian Hohnstaedt <chohnstaedt@innominate.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: Add missing __devexit tags in various driversJean Delvare2007-07-301-1/+1
| | | | | | | | | | | | | | On Sun, 22 Jul 2007 00:30:56 +0200, Gabriel C wrote: > I noticed this warnings on current git: > > drivers/hwmon/pc87360.c:1082: warning: 'pc87360_remove' defined but not used > drivers/hwmon/sis5595.c:580: warning: 'sis5595_remove' defined but not used > drivers/hwmon/smsc47m1.c:608: warning: 'smsc47m1_remove' defined but not used > drivers/hwmon/via686a.c:648: warning: 'via686a_remove' defined but not used > drivers/hwmon/vt8231.c:755: warning: 'vt8231_remove' defined but not used Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: Fix a potential race condition on unloadJean Delvare2007-07-191-1/+2
| | | | | | | | | | | | | | | Fix a potential race condition when some hardware monitoring platform drivers are being unloaded. I believe that the driver data pointer shouldn't be cleared before all the sysfs files are removed, otherwise a sysfs callback might attempt to dereference a NULL pointer. I'm not sure exactly what the driver core protects drivers against, so let's play it safe. While we're here, clear the driver data pointer when probe fails, so as to not leave an invalid pointer behind us. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon/w83627hf: Add PWM frequency selection supportCarlos Olalla Martinez2007-07-191-1/+140
| | | | | Signed-off-by: Carlos Olalla <com.ea@tinet.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: Use platform_device_add_data()Jean Delvare2007-07-191-6/+3
| | | | | | | | Use platform_device_add_data() in hardware monitoring drivers. This makes the code nicer and smaller too. Reported by David Hubbard. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: David Hubbard <david.c.hubbard@gmail.com>
* hwmon/w83627hf: Be quiet when no chip is foundJean Delvare2007-05-271-1/+3
| | | | Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon/w83627hf: Convert to a platform driverJean Delvare2007-05-081-281/+310
| | | | | | | Convert the w83627hf driver from the nonsensical i2c-isa hack to a regular platform driver. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon/w83627hf: Preliminary cleanupsJean Delvare2007-05-081-40/+36
| | | | | | | | | | | | | | | | Some preliminary cleanups to the w83627hf hardware monitoring driver, to make its conversion to a platform driver easier: * Add missing include ioport.h * Drop unused enum value any_chip * Group module parameters * Define and use DRVNAME * Drop unused struct member lm75 * Move the handling of force_addr and device activation to w83627hf_find * Consistently use local type in w83627hf_init_client Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: Only call vid_which_vrm() when neededJean Delvare2007-05-081-4/+5
| | | | | | | | | | | Some hardware monitoring drivers create the VID/VRM interface files conditionally depending on the chip model or configuration. We should only call vid_which_vrm() when we are actually going to create the files. Not only it is more logical and efficient that way, but it also prevents printing unnecessary warnings such as the one reported here: http://lists.lm-sensors.org/pipermail/lm-sensors/2007-February/018954.html Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: Cleanup a bogus legacy commentJean Delvare2007-02-141-3/+2
| | | | | | | Cleanup a bogus legacy comment that has been replicated to many hardware monitoring drivers. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: Fix unchecked return status, batch 1Mark M. Hoffman2006-09-281-94/+138
| | | | | | | | | | | | hwmon: Fix unchecked return status, batch 1 Fix up some hwmon drivers so that they no longer ignore return status from device_create_file(). Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* i2c-isa: Restore driver ownerJean Delvare2006-09-261-0/+1
| | | | | | | | | | | | i2c-isa: Restore driver owner Commit 2b48716d1d2f2edb1e7cbc5ecf1cb2cb39373e33 back in January 2006 was a bit overzealous. It removed .owner from all i2c drivers, including i2c-isa ones, while they still need it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* spelling fixesAndreas Mohr2006-06-261-1/+1
| | | | | | | | | | | | acquired (aquired) contiguous (contigious) successful (succesful, succesfull) surprise (suprise) whether (weather) some other misspellings Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [PATCH] I2C: hwmon: Rename register parametersDarren Jenkins2006-03-231-3/+2
| | | | | | | | | | | | "register" is a reserved keyword so using it as a parameter name can confuse some compilers, most notably ICC. The patch below just renames all occurences to reg which fits the actual function declarations. Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: Add support for the Winbond W83687THFJean Delvare2006-03-231-14/+58
| | | | | | | | | | Add support for the Winbond W83687THF chip to the w83627hf hardware monitoring driver. This new chip is almost similar to the already supported W83627THF chip, except for VID and a few other minor changes. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: Semaphore to mutex conversionsIngo Molnar2006-03-231-28/+29
| | | | | | | | | | | | | convert drivers/hwmon/*.c semaphore use to mutexes. the conversion was generated via scripts, and the result was validated automatically via a script as well. all affected hwmon drivers were build-tested. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: Remove .owner setting from i2c_driver as it's no longer neededGreg Kroah-Hartman2006-01-051-1/+0
| | | | | | | | | | Now that i2c_add_driver() doesn't need the module owner to be set by hand, we can delete it from the drivers. This patch catches all of the drivers that I found in the current tree (if a driver sets the .owner by hand, it's not a problem, just not needed.) Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: Jean Delvare <khali@linux-fr.org>
* [PATCH] i2c: Drop i2c_driver.{owner,name}, 3 of 11Laurent Riffard2006-01-051-3/+5
| | | | | | | | | | | We should use the i2c_driver.driver's .name and .owner fields instead of the i2c_driver's ones. This patch updates the hwmon drivers. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: W83627THF VID fixesYuan Mu2006-01-051-9/+7
| | | | | | | | | This patch fixes the VID reading; no cpu0_vid and vrm files created if the chip is w83627thf and GPIO5 not enabled. Signed-off-by: Yuan Mu <ymu@winbond.com.tw> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-04 12:51:23 +0000