summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon
Commit message (Collapse)AuthorAgeFilesLines
* hwmon: (applesmc) Add iMac9,1 and MacBookPro2,2 supportJustin P. Mattock2010-04-141-0/+18
| | | | | | | | | | Add the iMac9,1 and the MacBookPro2,2 temperature sensors to hwmon driver applesmc to fix kernel bug #14429: https://bugzilla.kernel.org/show_bug.cgi?id=14429 Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Acked-by: Nicolas Boichat <nicolas@boichat.ch> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (it87) Invalidate cache on temperature sensor changeJean Delvare2010-04-141-0/+1
| | | | | | | | | When any temperature sensor type is changed, the corresponding temperature value needs to be updated. The register caching mechanism may delay this update, so we want to invalidate the cache to force an immediate update. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (it87) Properly handle wrong sensor type requestsJean Delvare2010-04-141-10/+10
| | | | | | | | | | Currently, if someone tries to set the thermal sensor type to an unsupported value, subsequent accesses to the chip may temporarily show the sensor in question as disabled. Use a temporary variable and only update the cached value on success, to prevent such confusion. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (it87) Don't arbitrarily enable temperature channelsJean Delvare2010-04-141-8/+5
| | | | | | | | | | Temperature channels can be used in 2 different modes (thermistor and thermal diode) and we don't know which one, if any, is correct for every given board. So don't arbitrarily choose one. Instead, leave the temperature channels untouched. They can be configured from user-space if needed anyway. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (sht15) Properly handle the case CONFIG_REGULATOR=nJean Delvare2010-04-141-1/+6
| | | | | | | | | | | When CONFIG_REGULATOR isn't set, regulator_get_voltage() returns 0. Properly handle this case by not trusting the value. Reported-by: Jerome Oufella <jerome.oufella@savoirfairelinux.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
* hwmon: (sht15) Fix sht15_calc_temp interpolation functionJerome Oufella2010-04-141-3/+3
| | | | | | | | | | | | | | | | | I discovered two issues. First the previous sht15_calc_temp() loop did not iterate through the temppoints array since the (data->supply_uV > temppoints[i - 1].vdd) test is always true in this direction. Also the two-points linear interpolation function was returning biased values due to a stray division by 1000 which shouldn't be there. [JD: Also change the default value for d1 from 0 to something saner.] Signed-off-by: Jerome Oufella <jerome.oufella@savoirfairelinux.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-3018-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* hwmon: (asc7621) Add X58 entry in KconfigJaswinder Singh Rajput2010-03-291-2/+2
| | | | | | | | Intel X58 have asc7621a chip. So added X58 entry in Kconfig for asc7621. Also arranged existing models in ascending order. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (w83793) Saving negative errors in unsignedDan Carpenter2010-03-291-1/+1
| | | | | | | | | | "ret" is used to store the return value for watchdog_trigger() and it should be signed for the error handling to work. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (coretemp) Add missing newline to dev_warn() messageDean Nelson2010-03-291-1/+1
| | | | | | | | | | Add missing newline to dev_warn() message string. This is more of an issue with older kernels that don't automatically add a newline if it was missing from the end of the previous line. Signed-off-by: Dean Nelson <dnelson@redhat.com> Cc: stable@kernel.org Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (coretemp) Fix cpu model outputPrarit Bhargava2010-03-291-1/+1
| | | | | | | Avoid hex and decimal confusion when printing out the cpu model. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* Merge branch 'hwmon-for-linus' of ↵Linus Torvalds2010-03-0612-1484/+2923
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: (23 commits) hwmon: Remove the deprecated adt7473 driver hwmon: Fix off-by-one kind values hwmon: (tmp421) Fix temperature conversions hwmon: (tmp421) Restore missing inputs hwmon: Driver for Andigilog aSC7621 family monitoring chips hwmon: (adt7411) Improve locking hwmon: Add driver for ADT7411 voltage and temperature sensor hwmon: (w83793) Add watchdog functionality hwmon: (g760a) Make rpm_from_cnt static hwmon: (it87) Validate auto pwm settings hwmon: (it87) Add support for old automatic fan speed control hwmon: (it87) Drop dead web links in documentation hwmon: (it87) Add an entry in MAINTAINERS hwmon: (it87) Use strict_strtol instead of simple_strtol hwmon: (it87) Fix many checkpatch errors and warnings hwmon: (it87) Add support for beep on alarm hwmon: (it87) Create vid attributes by group hwmon: (it87) Refactor attributes creation and removal hwmon: (it87) Expose the PWM/temperature mappings hwmon: (it87) Display fan outputs in automatic mode as such ...
| * hwmon: Remove the deprecated adt7473 driverAmerigo Wang2010-03-053-1195/+0
| | | | | | | | | | | | | | | | adt7473 driver is obsoleted by adt7475 driver. And it is scheduled to be removed in Feb 2010. Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: Fix off-by-one kind valuesJean Delvare2010-03-053-15/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Recent changes on the I2C front have left off-by-one array indexes in 3 hwmon drivers. Fix them. Faulty commit: e5e9f44c2 i2c: Drop I2C_CLIENT_INSMOD_2 to 8 Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Andre Prendel <andre.prendel@gmx.de> Cc: stable@kernel.org
| * hwmon: (tmp421) Fix temperature conversionsJean Delvare2010-03-051-2/+4
| | | | | | | | | | | | | | | | | | The low bits of temperature registers are status bits, they must be masked out before converting the register values to temperatures. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Andre Prendel <andre.prendel@gmx.de> Cc: stable@kernel.org
| * hwmon: (tmp421) Restore missing inputsJean Delvare2010-03-051-7/+7
| | | | | | | | | | | | | | | | | | | | | | An off-by-one error caused some inputs to not be created by the driver when they should. TMP421 gets only one input instead of two, TMP422 gets two instead of three, etc. Fix the bug by listing explicitly the number of inputs each device has. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Andre Prendel <andre.prendel@gmx.de> Cc: stable@kernel.org
| * hwmon: Driver for Andigilog aSC7621 family monitoring chipsGeorge Joseph2010-03-053-0/+1269
| | | | | | | | | | | | | | | | Hwmon driver for Andigilog aSC7621 family monitoring chips. Signed-off-by: George Joseph <george.joseph@fairview5.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (adt7411) Improve lockingWolfram Sang2010-03-051-7/+14
| | | | | | | | | | | | | | | | Add proper locking for the cached variables. Also get rid of ref_is_vdd, which became obsolete. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: Add driver for ADT7411 voltage and temperature sensorWolfram Sang2010-03-053-0/+370
| | | | | | | | | | | | | | | | | | | | Add basic support for the ADT7411. Reads out all conversion results (via I2C, SPI yet missing) and allows some on-the-fly configuration. Tested with a custom board. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (w83793) Add watchdog functionalitySven Anders2010-03-052-4/+481
| | | | | | | | | | | | | | | | Add watchdog functionality to the Winbond W83793 driver. Signed-off-by: Sven Anders <anders@anduras.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (g760a) Make rpm_from_cnt staticJean Delvare2010-03-051-1/+1
| | | | | | | | | | | | | | | | | | | | Function rpm_from_cnt is only used internally so it can be made static. Make it inline while we're here, for performance reasons (although hopefully gcc would figure out by itself...) Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Acked-by: Martin Michlmayr <tbm@cyrius.com>
| * hwmon: (it87) Validate auto pwm settingsJean Delvare2010-03-051-0/+32
| | | | | | | | | | | | | | | | Before switching to automatic fan control mode, make sure that all the trip points make sense. Otherwise, the control loop could lead to weird fan behavior. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (it87) Add support for old automatic fan speed controlJean Delvare2010-03-051-2/+180
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the automatic fan speed control interface as implemented by IT8705F chips up to revision F and IT8712F chips up to revision G. This implementation fits very well in our standard sysfs interface. I implemented the old and not the new interface because the only chip I have at hand is an old one, and the new interface is more difficult to map to the standard sysfs interface. Adding support later should be possible though, if someone with a supported chip is interested. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (it87) Use strict_strtol instead of simple_strtolJean Delvare2010-03-051-15/+44
| | | | | | | | | | | | | | For consistency and robustness, use strict_strtol instead of simple_strtol. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (it87) Fix many checkpatch errors and warningsJean Delvare2010-03-051-75/+87
| | | | | | | | | | | | | | | | Fix 20 errors and 11 warnings reported by the checkpatch script. The remainining errors would require more work. The remaining warnings will be addressed later. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (it87) Add support for beep on alarmJean Delvare2010-03-051-0/+122
| | | | | | | | | | | | | | | | The IT87xxF chips support beeping on alarm, if properly wired and configured. There is one control bit for each input type (temperature, fan, voltage.) Let the user see and change them. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (it87) Create vid attributes by groupJean Delvare2010-03-051-8/+7
| | | | | | | | | | | | | | | | Only VID-related attributes are left in it87_attributes_opt, so we might as well rename it to it87_attributes_vid and use this group to create all attributes at once. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (it87) Refactor attributes creation and removalJean Delvare2010-03-051-130/+103
| | | | | | | | | | | | | | | | | | | | | | | | There is a lot of code redundancy in the creation of the fan and pwm attributes. Move these attributes to arrays so that the code can be simplified. This in turns makes the attributes removal code larger, so move it to a separate function that can be called in both the standard removal case and the error path during probing. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (it87) Expose the PWM/temperature mappingsJean Delvare2010-03-051-4/+69
| | | | | | | | | | | | | | | | | | Let the user read the PWM-to-temperature mappings. Until the trip points are also exposed, this is essentially a way to know how the BIOS has set things up. The ability to change the settings will be added later, together with the trip points. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (it87) Display fan outputs in automatic mode as suchJean Delvare2010-03-051-38/+61
| | | | | | | | | | | | | | | | | | The it87 driver doesn't yet support automatic fan control. Let it at least tell the user when a fan output is in automatic mode. Also let the user switch from automatic mode (possibly set by the BIOS) to manual mode and back without losing the settings. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (lm90) Add SMBus alert supportJean Delvare2010-03-051-0/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested successfully with an ADM1032 chip on its evaluation board. It should work fine with all other chips as well. At this point this is more of a proof-of-concept, we don't do anything terribly useful on SMBus alert: we simply log the event. But this could later evolve into libsensors signaling so that user-space applications can take an appropriate action. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Trent Piepho <tpiepho@freescale.com>
| * hwmon: (lm90) Restore configuration on exitJean Delvare2010-03-051-4/+10
| | | | | | | | | | | | | | Restore the chip configuration when unloading the driver. This ensures we don't leave the chip running if it was initially stopped. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (lm90) Add support for the Winbond/Nuvoton W83L771AWG/ASGJean Delvare2010-03-052-3/+14
| | | | | | | | | | | | | | | | This chips is found on several Zotac Ion ITX boards, amongst others. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: MC Matti <mcmatti17@googlemail.com> Cc: Manuel Lamotte-Schubert <mls@pronego.com>
* | drivers/hwmon/adcxx.c: fix for single-channel ADCsJosé Miguel Gonçalves2010-03-061-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | While testing an ADC121S021 in an embedded board with a S3C2142 SoC (ARM core), I have found that the 'adcxx' driver does not handle correctly single channel ADCs from this chip family. For single channel chips you must only issue one read transfer for correct measurement. Signed-off-by: Jose Miguel Goncalves <jose.goncalves@inov.pt> Cc: Marc Pignat <marc.pignat@hevs.ch> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | drivers/hwmon/vt8231.c: fix continuation line formatsJoe Perches2010-03-061-2/+1
|/ | | | | | | | | | | String constants that are continued on subsequent lines with \ will cause spurious whitespace in the resulting output. Signed-off-by: Joe Perches <joe@perches.com> Cc: Roger Lucas <vt8231@hiddenengine.co.uk> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge commit 'origin/master' into nextBenjamin Herrenschmidt2010-02-173-27/+26
|\
| * hwmon: (w83781d) Request I/O ports individually for probingJean Delvare2010-02-051-13/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Different motherboards have different PNP declarations for W83781D/W83782D chips. Some declare the whole range of I/O ports (8 ports), some declare only the useful ports (2 ports at offset 5) and some declare fancy ranges, for example 4 ports at offset 4. To properly handle all cases, request all ports individually for probing. After we have determined that we really have a W83781D or W83782D chip, the useful port range will be requested again, as a single block. I did not see a board which needs this yet, but I know of one for lm78 driver and I'd like to keep the logic of these two drivers in sync. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
| * hwmon: (lm78) Request I/O ports individually for probingJean Delvare2010-02-051-13/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Different motherboards have different PNP declarations for LM78/LM79 chips. Some declare the whole range of I/O ports (8 ports), some declare only the useful ports (2 ports at offset 5) and some declare fancy ranges, for example 4 ports at offset 4. To properly handle all cases, request all ports individually for probing. After we have determined that we really have an LM78 or LM79 chip, the useful port range will be requested again, as a single block. This fixes the driver on the Olivetti M3000 DT 540, at least. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
| * hwmon: (adt7462) Wrong ADT7462_VOLT_COUNTRay Copeland2010-02-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The #define ADT7462_VOLT_COUNT is wrong, it should be 13 not 12. All the for loops that use this as a limit count are of the typical form, "for (n = 0; n < ADT7462_VOLT_COUNT; n++)", so to loop through all voltages w/o missing the last one it is necessary for the count to be one greater than it is. (Specifically, you will miss the +1.5V 3GPIO input with count = 12 vs. 13.) Signed-off-by: Ray Copeland <ray.copeland@aprius.com> Acked-by: "Darrick J. Wong" <djwong@us.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
* | macintosh/hwmon/ams: Fix device removal sequenceJean Delvare2010-02-034-4/+12
|/ | | | | | | | | | | | | | | | | | Some code that is in ams_exit() (the module exit code) should instead be called when the device (not module) is removed. It probably doesn't make much of a difference in the PMU case, but in the I2C case it does matter. I make no guarantee that my fix isn't racy, I'm not familiar enough with the ams driver code to tell for sure. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Christian Kujau <lists@nerdbynature.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Stelian Pop <stelian@popies.net> Cc: Michael Hanselmann <linux-kernel@hansmi.ch> Cc: stable@kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* hwmon: (fschmd) Fix a memleak on multiple opens of /dev/watchdogHans de Goede2010-01-251-2/+5
| | | | | | | | | When /dev/watchdog gets opened a second time we return -EBUSY, but we already have got a kref then, so we end up leaking our data struct. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
* hwmon: (asus_atk0110) Do not fail if MBIF is missingLuca Tettamanti2010-01-251-10/+9
| | | | | | | | | | MBIF (motherboard identification) is only used to print the name of the board, it's not essential for the driver; do not fail if it's missing. Based on Juan's patch. Signed-off-by: Luca Tettamanti <kronos.it@gmail.com> Acked-by: Juan RP <xtraeme@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (amc6821) Double unlock bugDan Carpenter2010-01-251-1/+0
| | | | | | | The mutex gets unlocked after we goto EXIT. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (smsc47m1) Fix section mismatchJeff Mahoney2010-01-251-1/+1
| | | | | | | | smsc47m1_restore is called from sm_smsc47m1_exit, which is an __exit function, so it can't be __init. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* Merge branch 'hwmon-for-linus' of ↵Linus Torvalds2010-01-119-69/+288
|\ | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: Make PCI device ids constant hwmon: (coretemp) Fix TjMax for Atom N450/D410/D510 CPUs hwmon: (k10temp) Blacklist more family 10h processors hwmon: (asus_atk0110) Add debugfs interface hwmon: (asus_atk0110) Refactor interface probe code hwmon: (adt7462) Fix pin 28 monitoring
| * hwmon: Make PCI device ids constantMárton Németh2010-01-105-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The id_table field of the struct pci_driver is constant in <linux/pci.h> so it is worth to make pci_device_id also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // </smpl> Signed-off-by: Márton Németh <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (coretemp) Fix TjMax for Atom N450/D410/D510 CPUsYong Wang2010-01-102-3/+15
| | | | | | | | | | | | | | | | | | | | | | The max junction temperature of Atom N450/D410/D510 CPUs is 100 degrees Celsius. Since these CPUs are always coupled with Intel NM10 chipset in one package, the best way to verify whether an Atom CPU is N450/D410/D510 is to check the host bridge device. Signed-off-by: Yong Wang <yong.y.wang@intel.com> Acked-by: Huaxu Wan <huaxu.wan@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (k10temp) Blacklist more family 10h processorsClemens Ladisch2010-01-101-6/+32
| | | | | | | | | | | | | | | | | | | | | | The latest version of the Revision Guide for AMD Family 10h Processors lists two more processor revisions which may be affected by erratum 319. Change the blacklisting code to correctly detect those processors, by implementing AMD's recommended algorithm. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Andreas Herrmann <herrmann.der.user@googlemail.com>
| * hwmon: (asus_atk0110) Add debugfs interfaceLuca Tettamanti2010-01-101-0/+191
| | | | | | | | | | | | | | | | | | | | | | Expose the raw GGRP/GITM interface via debugfs. The hwmon interface is reverse engineered and the driver tends to break on newer boards... Using this interface it's possible to poke directly at the ACPI methods without the need to recompile, reducing the guesswork and the round trips needed to support a new revision of the interface. Signed-off-by: Luca Tettamanti <kronos.it@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: (asus_atk0110) Refactor interface probe codeLuca Tettamanti2010-01-101-54/+44
| | | | | | | | | | | | | | | | The behaviour is unmodified, this makes easier to override the heuristic (which is probably needed for some boards). Signed-off-by: Luca Tettamanti <kronos.it@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 17:42:24 +0000