summaryrefslogtreecommitdiffstats
path: root/drivers/i2c/busses/i2c-i801.c
Commit message (Collapse)AuthorAgeFilesLines
* i2c: i801: add lis3lv02d's I2C address for Vostro 5568Nam Cao2022-11-011-0/+1
| | | | | | | | | | | | | | | | | Dell Vostro 5568 laptop has lis3lv02d, but its i2c address is not known to the kernel. Add this address. Output of "cat /sys/devices/platform/lis3lv02d/position" on Dell Vostro 5568 laptop: - Horizontal: (-18,0,1044) - Front elevated: (522,-18,1080) - Left elevated: (-18,-360,1080) - Upside down: (36,108,-1134) Signed-off-by: Nam Cao <namcaov@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Pali Rohár <pali@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: i801: Prefer async probeMani Milani2022-10-021-0/+1
| | | | | | | | | | | | | | | | This i801 driver probe can take more than ~190ms in some devices, since the "i2c_register_spd()" call was added inside "i801_probe_optional_slaves()". Prefer async probe so that other drivers can be probed and boot can continue in parallel while this driver loads, to reduce boot time. There is no reason to block other drivers from probing while this driver is loading. Signed-off-by: Mani Milani <mani@chromium.org> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: move drivers from strlcpy to strscpyWolfram Sang2022-08-111-2/+2
| | | | | | | | | | Follow the advice of the below link and prefer 'strscpy'. Conversion is easy because no driver used the return value and has been done with a simple sed invocation. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* Merge tag 'platform-drivers-x86-v6.0-1' of ↵Linus Torvalds2022-08-041-30/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: - Microsoft Surface: - SSAM hot unplug support - Surface Pro 8 keyboard cover support - Tablet mode switch support for Surface Pro 8 and Surface Laptop Studio - thinkpad_acpi: - AMD Automatice Mode Transitions (AMT) support - Mellanox: - Vulcan chassis COMe NVSwitch management support - XH3000 support - New generic/shared Intel P2SB (Primary to Sideband) support - Lots of small cleanups - Various small bugfixes - Various new hardware ids / quirks additions * tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (105 commits) platform/x86/intel/vsec: Fix wrong type for local status variables platform/x86: p2sb: Move out of X86_PLATFORM_DEVICES dependency platform/x86: pmc_atom: Fix comment typo platform/surface: gpe: Add support for 13" Intel version of Surface Laptop 4 platform/olpc: Fix uninitialized data in debugfs write platform/mellanox: mlxreg-lc: Fix error flow and extend verbosity platform/x86: pmc_atom: Match all Lex BayTrail boards with critclk_systems DMI table platform/x86: sony-laptop: Remove useless comparisons in sony_pic_read_possible_resource() tools/power/x86/intel-speed-select: Remove unneeded semicolon tools/power/x86/intel-speed-select: Fix off by one check platform/surface: tabletsw: Fix __le32 integer access Documentation/ABI: Add new attributes for mlxreg-io sysfs interfaces Documentation/ABI: mlxreg-io: Fix contact info platform/mellanox: mlxreg-io: Add locking for io operations platform/x86: mlx-platform: Add COME board revision register platform/x86: mlx-platform: Add support for new system XH3000 platform/x86: mlx-platform: Introduce support for COMe NVSwitch management module for Vulcan chassis platform/x86: mlx-platform: Add support for systems equipped with two ASICs platform/x86: mlx-platform: Add cosmetic changes for alignment platform/x86: mlx-platform: Make activation of some drivers conditional ...
| * i2c: i801: convert to use common P2SB accessorAndy Shevchenko2022-07-141-30/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since we have a common P2SB accessor in tree we may use it instead of open coded variants. Replace custom code by p2sb_bar() call. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Henning Schild <henning.schild@siemens.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Jean Delvare <jdelvare@suse.de> Acked-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Lee Jones <lee@kernel.org>
* | i2c: i801: Add support for Intel Meteor Lake-PJarkko Nikula2022-07-061-0/+3
|/ | | | | | | | | Add SMBus PCI ID on Intel Meteor Lake-P. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: i801: Drop two outdated commentsJean Delvare2022-03-111-5/+0
| | | | | | | | | | | | | * Timeouts are reported even in interrupt mode since commit b3b8df97723d ("i2c: i801: Use wait_event_timeout to wait for interrupts") so drop the comment which claims this only happens in polled mode. * xact does not include the PEC bit, as the driver does not support software PEC. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: i801: Add support for the Process Call commandJean Delvare2022-03-021-1/+11
| | | | | | | | | | | | The Process Call command is implemented by the hardware since the very first Intel 82801 chipset, and trivial to support. Oscar Romero Matamala from the Georgia Institute of Technology told me it is needed for an experiment his team is working on at the moment, so let's just add support for it. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: i801: Drop useless masking in i801_accessJean Delvare2022-03-021-2/+2
| | | | | | | | | | | | | | | I went all the way back to kernel 2.6.12 and that masking was never needed. I suppose it was there in anticipation of software PEC support, but that was never added to the driver (and never will be, as this is made obsolete by hardware PEC). I'm also removing initialization to 0, which is not needed either, and would prevent the compiler from reporting an actual usage of uninitialized variables. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: i801: Add support for Intel Raptor Lake PCH-SJarkko Nikula2022-02-151-0/+3
| | | | | | | | Add SMBus PCI ID on Intel Raptor Lake PCH-S. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: i801: Don't clear status flags twice in interrupt modeHeiner Kallweit2021-12-091-11/+5
| | | | | | | | | | | | | | In interrupt mode we clear the status flags twice, in the interrupt handler and in i801_check_post(). Remove clearing the status flags from i801_check_post() and handle polling mode by using the SMBus unlocking write to also clear the status flags if still set. To be precise: One could still argue that the status flags are cleared twice in interrupt mode, but it comes for free. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: i801: Don't read back cleared status in i801_check_pre()Heiner Kallweit2021-12-091-19/+3
| | | | | | | | | | | | | | I see no need to read back the registers to verify that the bits have actually been cleared. I can't imagine any scenario where the bits would remain set after a write to them. Whilst at it, change involved syslog messages to use pci_dbg() et al. to simplify them. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: i801: Improve handling platform data for tco deviceHeiner Kallweit2021-11-291-15/+12
| | | | | | | | | | The platform data structures are used in the respective i801_add_tco functions only. Therefore we can make the definitions local to these functions. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: i801: Improve handling of chip-specific feature definitionsHeiner Kallweit2021-11-291-125/+66
| | | | | | | | | | Reduce source code and code size by defining the chip features statically. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: i801: Remove i801_set_block_buffer_modeHeiner Kallweit2021-11-291-12/+5
| | | | | | | | | | | | If FEATURE_BLOCK_BUFFER is set then bit SMBAUXCTL_E32B is supported and there's no benefit in reading it back. Origin of this check seems to be 14 yrs ago when people were not completely sure which chip versions support the block buffer mode. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: i801: Don't silently correct invalid transfer sizeHeiner Kallweit2021-11-291-10/+5
| | | | | | | | | | | | | | | | If an invalid block size is provided, reject it instead of silently changing it to a supported value. Especially critical I see the case of a write transfer with block length 0. In this case we have no guarantee that the byte we would write is valid. When silently reducing a read to 32 bytes then we don't return an error and the caller may falsely assume that we returned the full requested data. If this change should break any (broken) caller, then I think we should fix the caller. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: i801: Fix interrupt storm from SMB_ALERT signalJarkko Nikula2021-11-231-6/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | Currently interrupt storm will occur from i2c-i801 after first transaction if SMB_ALERT signal is enabled and ever asserted. It is enough if the signal is asserted once even before the driver is loaded and does not recover because that interrupt is not acknowledged. This fix aims to fix it by two ways: - Add acknowledging for the SMB_ALERT interrupt status - Disable the SMB_ALERT interrupt on platforms where possible since the driver currently does not make use for it Acknowledging resets the SMB_ALERT interrupt status on all platforms and also should help to avoid interrupt storm on older platforms where the SMB_ALERT interrupt disabling is not available. For simplicity this fix reuses the host notify feature for disabling and restoring original register value. Link: https://bugzilla.kernel.org/show_bug.cgi?id=177311 Reported-by: ck+kernelbugzilla@bl4ckb0x.de Reported-by: stephane.poignant@protonmail.com Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: i801: Restore INTREN on unloadJean Delvare2021-11-231-1/+6
| | | | | | | | | | | | | | | | | If driver interrupts are enabled, SMBHSTCNT_INTREN will be 1 after the first transaction, and will stay to that value forever. This means that interrupts will be generated for both host-initiated transactions and also SMBus Alert events even after the driver is unloaded. To be on the safe side, we should restore the initial state of this bit at suspend and reboot time, as we do for several other configuration bits already and for the same reason: the BIOS should be handed the device in the same configuration state in which we received it. Otherwise interrupts may be generated which nobody will process. Signed-off-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: i801: Add support for Intel Ice Lake PCH-NAndy Shevchenko2021-11-071-0/+4
| | | | | | | | | | | | Add PCI ID of SMBus controller on Intel Ice Lake PCH-N. The device can be found on MacBookPro16,2 [1]. [1]: https://linux-hardware.org/?probe=f1c5cf0c43 Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: i801: Fix incorrect and needless software PEC disablingJarkko Nikula2021-10-291-1/+0
| | | | | | | | | | | | | | | | Commit a6b8bb6a813a ("i2c: i801: Fix handling SMBHSTCNT_PEC_EN") attempts to disable software PEC by clearing the SMBHSTCNT_PEC_EN (bit 7) in the SMBus Host Control register (I/O SMBHSTCNT) but incorrectly clears it in the PCI Host Configuration register (PCI SMBHSTCFG). This clearing is actually needless since after above commit the SMBHSTCNT_PEC_EN is never set and the register is initialized with known values. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: i801: Stop using pm_runtime_set_autosuspend_delay(-1)Heiner Kallweit2021-09-291-4/+5
| | | | | | | | | | | | | | | | | | | | | | | The original change works as intended, but Andy pointed in [0] that now userspace could re-enable RPM via sysfs, even though we explicitly want to disable it. So effectively revert the original patch, just with small improvements: - Calls to pm_runtime_allow()/pm_runtime_forbid() don't have to be balanced, so we can remove the call to pm_runtime_forbid() in i801_remove(). - priv->acpi_reserved is accessed after i801_acpi_remove(), and according to Robert [1] the custom handler can't run any longer. Therefore we don't have to take priv->acpi_lock. [0] https://www.spinics.net/lists/linux-i2c/msg52730.html [1] https://lore.kernel.org/linux-acpi/BYAPR11MB32561D19A0FD9AB93E2B1E5287D39@BYAPR11MB3256.namprd11.prod.outlook.com/T/#t Fixes: 4e60d5dd10cd ("i2c: i801: Improve disabling runtime pm") Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: i801: Use PCI bus rescan mutex to protect P2SB accessHeiner Kallweit2021-09-291-3/+2
| | | | | | | | | | | | | | | As pointed out by Andy in [0] using a local mutex here isn't strictly wrong but not sufficient. We should hold the PCI rescan lock for P2SB operations. [0] https://www.spinics.net/lists/linux-i2c/msg52717.html Fixes: 1a987c69ce2c ("i2c: i801: make p2sb_spinlock a mutex") Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: i801: Improve i801_add_muxHeiner Kallweit2021-09-291-11/+7
| | | | | | | | | | | The return value of i801_add_mux() isn't used, so let's change it to void. In addition remove the not needed cast to struct gpiod_lookup. GPIO_LOOKUP() uses GPIO_LOOKUP_IDX() that includes this cast. Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: i801: Improve i801_acpi_probe/remove functionsHeiner Kallweit2021-09-291-16/+7
| | | | | | | | | | | | By using ACPI_HANDLE() the handler argument can be retrieved directly. Both address space handler functions check the handler argument and return an error if it's NULL. This allows to further simplify the code. Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: i801: Remove not needed check for PCI_COMMAND_INTX_DISABLEHeiner Kallweit2021-09-291-8/+1
| | | | | | | | | | do_pci_enable_device() takes care that PCI_COMMAND_INTX_DISABLE is cleared if a legacy interrupt is used. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: i801: Improve is_dell_system_with_lis3lv02dHeiner Kallweit2021-09-291-9/+5
| | | | | | | | | Replace the ugly cast of the return_value pointer with proper usage. In addition use dmi_match() instead of open-coding it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: i801: Remove not needed debug messageHeiner Kallweit2021-08-101-4/+0
| | | | | | | | | If a user is interested in such details he can enable smbus tracing. Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: i801: make p2sb_spinlock a mutexHeiner Kallweit2021-08-101-4/+4
| | | | | | | | | | | p2sb_spinlock is used in i801_add_tco_spt() only, and in process context only. Therefore a mutex is sufficient, and we can make the definition local to i801_add_tco_spt(). Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: i801: Improve disabling runtime pmHeiner Kallweit2021-08-101-6/+1
| | | | | | | | | | | | Setting the autosuspend delay to a negative value disables runtime pm in a little bit smarter way, because we need no cleanup when removing the driver. Note that this is safe when reloading the driver, because the call to pm_runtime_set_autosuspend_delay() in probe() will reverse the effect. See update_autosuspend() for details. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: i801: Fix handling SMBHSTCNT_PEC_ENHeiner Kallweit2021-07-281-16/+11
| | | | | | | | | | | | | | | | | | | | | | Bit SMBHSTCNT_PEC_EN is used only if software calculates the CRC and uses register SMBPEC. This is not supported by the driver, it supports hw-calculation of CRC only (using bit SMBAUXSTS_CRCE). The chip spec states the following, therefore never set bit SMBHSTCNT_PEC_EN. Chapter SMBus CRC Generation and Checking If the AAC bit is set in the Auxiliary Control register, the PCH automatically calculates and drives CRC at the end of the transmitted packet for write cycles, and will check the CRC for read cycles. It will not transmit the contents of the PEC register for CRC. The PEC bit must not be set in the Host Control register. If this bit is set, unspecified behavior will result. This patch is based solely on the specification and compile-tested only, because I have no PEC-capable devices. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* Merge branch 'i2c/for-mergewindow' of ↵Linus Torvalds2021-07-041-85/+51
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - core supports now bus regulators controlling power for SCL/SDA - quite some DT binding conversions to YAML - added a seperate DT binding for the optional SMBus Alert feature - documentation with examples how to deal with I2C sysfs files - some bigger rework for the i801 driver - and a few usual driver updates * 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (42 commits) i2c: ali1535: mention that the device should not be disabled i2c: mpc: Restore reread of I2C status register i2c: core-smbus: Expose PEC calculate function for generic use Documentation: i2c: Add doc for I2C sysfs i2c: core: Disable client irq on reboot/shutdown dt-bindings: i2c: update bindings for MT8195 SoC i2c: imx: Fix some checkpatch warnings i2c: davinci: Simplify with dev_err_probe() i2c: cadence: Simplify with dev_err_probe() i2c: xiic: Simplify with dev_err_probe() i2c: cadence: Clear HOLD bit before xfer_size register rolls over dt-bindings: i2c: ce4100: Replace "ti,pcf8575" by "nxp,pcf8575" i2c: i801: Improve i801_setup_hstcfg i2c: i801: Use driver name constant instead of function dev_driver_string i2c: i801: Simplify initialization of i2c_board_info in i801_probe_optional_slaves i2c: i801: Improve status polling i2c: cht-wc: Replace of_node by NULL i2c: riic: Add RZ/G2L support dt-bindings: i2c: renesas,riic: Document RZ/G2L I2C controller dt-bindings: i2c: renesas,iic: Convert to json-schema ...
| * i2c: i801: Improve i801_setup_hstcfgHeiner Kallweit2021-06-201-6/+4
| | | | | | | | | | | | | | | | | | | | | | i801_setup_hstcfg() leaves the bits in priv->original_hstcfg that we're interested in intact. Therefore we can remove the return value from the function and use priv->original_hstcfg directly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
| * i2c: i801: Use driver name constant instead of function dev_driver_stringHeiner Kallweit2021-06-201-5/+5
| | | | | | | | | | | | | | | | | | | | We are the driver, so we can use the driver name directly instead of retrieving it by calling dev_driver_string(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
| * i2c: i801: Simplify initialization of i2c_board_info in ↵Heiner Kallweit2021-06-201-4/+4
| | | | | | | | | | | | | | | | | | | | i801_probe_optional_slaves Why shall we bother to open-code something that the compiler can do for us. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
| * i2c: i801: Improve status pollingHeiner Kallweit2021-06-201-23/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Polling uses the same timeout as irq mode: 400 * 500us = 200ms = HZ / 5. So let's use the adapter->timeout value also for polling. This has the advantage that userspace can control the timeout value for polling as well. In addition change the code to make it better readable. Last but not least remove the timeout debug messages. Calls to both functions are followed by a call to i801_check_post() that will print an error message in case of timeout. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
| * i2c: i801: Use standard PCI constants instead of own onesHeiner Kallweit2021-05-271-14/+6
| | | | | | | | | | | | | | | | | | | | Layout of these registers is part of the PCI standard. Therefore use the constants defined by the PCI subsystem. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
| * i2c: i801: Replace waitqueue with completion APIHeiner Kallweit2021-05-271-29/+19
| | | | | | | | | | | | | | | | | | | | | | | | Using the completion API is more intuitive and it allows to simplify the code. Note that we don't have to set priv->status = 0 any longer with the completion API. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
| * i2c: i801: Remove unneeded warning after wait_event_timeout timeoutHeiner Kallweit2021-05-271-8/+4
| | | | | | | | | | | | | | | | | | | | | | When passing -ETIMEDOUT to i801_check_post() it will emit a timeout error message. I don't see much benefit in an additional warning stating more or less the same. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* | i2c: i801: Ensure that SMBHSTSTS_INUSE_STS is cleared when leaving i801_accessHeiner Kallweit2021-06-201-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As explained in [0] currently we may leave SMBHSTSTS_INUSE_STS set, thus potentially breaking ACPI/BIOS usage of the SMBUS device. Seems patch [0] needs a little bit more of review effort, therefore I'd suggest to apply a part of it as quick win. Just clearing SMBHSTSTS_INUSE_STS when leaving i801_access() should fix the referenced issue and leaves more time for discussing a more sophisticated locking handling. [0] https://www.spinics.net/lists/linux-i2c/msg51558.html Fixes: 01590f361e94 ("i2c: i801: Instantiate SPD EEPROMs automatically") Suggested-by: Hector Martin <marcan@marcan.st> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Hector Martin <marcan@marcan.st> Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* | i2c: i801: Don't generate an interrupt on bus resetJean Delvare2021-05-271-4/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the i2c-i801 driver supports interrupts, setting the KILL bit in a attempt to recover from a timed out transaction triggers an interrupt. Unfortunately, the interrupt handler (i801_isr) is not prepared for this situation and will try to process the interrupt as if it was signaling the end of a successful transaction. In the case of a block transaction, this can result in an out-of-range memory access. This condition was reproduced several times by syzbot: https://syzkaller.appspot.com/bug?extid=ed71512d469895b5b34e https://syzkaller.appspot.com/bug?extid=8c8dedc0ba9e03f6c79e https://syzkaller.appspot.com/bug?extid=c8ff0b6d6c73d81b610e https://syzkaller.appspot.com/bug?extid=33f6c360821c399d69eb https://syzkaller.appspot.com/bug?extid=be15dc0b1933f04b043a https://syzkaller.appspot.com/bug?extid=b4d3fd1dfd53e90afd79 So disable interrupts while trying to reset the bus. Interrupts will be enabled again for the following transaction. Fixes: 636752bcb517 ("i2c-i801: Enable IRQ for SMBus transactions") Reported-by: syzbot+b4d3fd1dfd53e90afd79@syzkaller.appspotmail.com Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: i801: Add support for Intel Alder Lake PCH-MJarkko Nikula2021-04-171-0/+4
| | | | | | | Add PCI ID of SMBus controller on Intel Alder Lake PCH-M. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* i2c: i801: Add support for Intel Alder Lake PCH-PJarkko Nikula2021-02-091-0/+4
| | | | | | | Add PCI ID of SMBus controller on Intel Alder Lake PCH-P. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* Merge tag 'v5.11-rc5' into i2c/for-5.12Wolfram Sang2021-01-281-1/+1
|\ | | | | | | Linux 5.11-rc5
| * i2c: i801: Fix the i2c-mux gpiod_lookup_table not being properly terminatedHans de Goede2021-01-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | gpiod_add_lookup_table() expects the gpiod_lookup_table->table passed to it to be terminated with a zero-ed out entry. So we need to allocate one more entry then we will use. Fixes: d308dfbf62ef ("i2c: mux/i801: Switch to use descriptor passing") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* | i2c: i801: Refactor mux code since platform_device_unregister() is NULL awareAndy Shevchenko2021-01-051-7/+3
| | | | | | | | | | | | | | | | | | | | platform_device_unregister() is NULL-aware and thus doesn't required a duplication check in i801_del_mux(). Besides that it's also error pointer aware, and we may drop unneeded assignment in i801_add_mux() followed by conversion to PTR_ERR_OR_ZERO() for the returned value. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* | i2c: i801: Drop duplicate NULL check in i801_del_mux()Andy Shevchenko2021-01-051-2/+1
|/ | | | | | | | Since gpiod_remove_lookup_table() is NULL-aware, no need to have this check in the caller. Drop duplicate NULL check. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* Merge branch 'i2c/for-5.10' of ↵Linus Torvalds2020-10-211-0/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - if a host can be a client, too, the I2C core can now use it to emulate SMBus HostNotify support (STM32 and R-Car added this so far) - also for client mode, a testunit has been added. It can create rare situations on the bus, so host controllers can be tested - a binding has been added to mark the bus as "single-master". This allows for better timeout detections - new driver for Mellanox Bluefield - massive refactoring of the Tegra driver - EEPROMs recognized by the at24 driver can now have custom names - rest is driver updates * 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (80 commits) Documentation: i2c: add testunit docs to index i2c: tegra: Improve driver module description i2c: tegra: Clean up whitespaces, newlines and indentation i2c: tegra: Clean up and improve comments i2c: tegra: Clean up printk messages i2c: tegra: Clean up variable names i2c: tegra: Improve formatting of variables i2c: tegra: Check errors for both positive and negative values i2c: tegra: Factor out hardware initialization into separate function i2c: tegra: Factor out register polling into separate function i2c: tegra: Factor out packet header setup from tegra_i2c_xfer_msg() i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg() i2c: tegra: Rename wait/poll functions i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg() i2c: tegra: Remove redundant check in tegra_i2c_issue_bus_clear() i2c: tegra: Remove likely/unlikely from the code i2c: tegra: Remove outdated barrier() i2c: tegra: Clean up variable types i2c: tegra: Reorder location of functions in the code i2c: tegra: Clean up probe function ...
| * i2c: i801: Add support for Intel Alder Lake PCH-SJarkko Nikula2020-09-291-0/+4
| | | | | | | | | | | | | | | | Add PCI ID of SMBus controller on Intel Alder Lake PCH-S Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
| * i2c: i801: Register lis3lv02d I2C device on Dell Latitude 5480Jeffrey Lin2020-09-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Value of /sys/devices/platform/lis3lv02d/position when Horizontal: (36,-108,-1152) Left elevated: (-432,-126,-1062) Front elevated: (36,594,-936) Upside down: (-126,-252,1098) Signed-off-by: Jeffrey Lin <jeffrey@icurse.nl> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
* | i2c: i801: Exclude device from suspend direct complete optimizationJean Delvare2020-09-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | By default, PCI drivers with runtime PM enabled will skip the calls to suspend and resume on system PM. For this driver, we don't want that, as we need to perform additional steps for system PM to work properly on all systems. So instruct the PM core to not skip these calls. Fixes: a9c8088c7988 ("i2c: i801: Don't restore config registers on runtime PM") Reported-by: Volker Rümelin <volker.ruemelin@googlemail.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Wolfram Sang <wsa@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-02 19:19:44 +0000