summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
Commit message (Collapse)AuthorAgeFilesLines
* i2c: ismt: initialize DMA bufferJames Ralston2013-09-281-0/+3
| | | | | | | | | This patch adds code to initialize the DMA buffer to compensate for possible hardware data corruption. Signed-off-by: James Ralston <james.d.ralston@intel.com> [wsa: changed to use 'sizeof'] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: designware: 10-bit addressing mode enabling if I2C_DYNAMIC_TAR_UPDATE ↵Chew, Chiau Ee2013-09-271-6/+20
| | | | | | | | | | | | | | | | is set According to Designware I2C spec, if I2C_DYNAMIC_TAR_UPDATE is set to 1, the 10-bit addressing mode is controlled by IC_10BITADDR_MASTER bit of IC_TAR register instead of IC_CON register. The IC_10BITADDR_MASTER in IC_CON register becomes read-only copy. Since I2C_DYNAMIC_TAR_UPDATE value can't be detected from hardware register, so we will always set the IC_10BITADDR_MASTER bit in both IC_CON and IC_TAR register whenever 10-bit addresing mode is requested by user application. Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: mv64xxx: Do not use writel_relaxed()Thierry Reding2013-09-271-2/+2
| | | | | | | | | | The driver is used on PowerPC which don't provide writel_relaxed(). This breaks the c2k and prpmc2800 default configurations. To fix the build, turn the calls to writel_relaxed() into writel(). The impacts for ARM should be minimal. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: mv64xxx: Fix some build warningsThierry Reding2013-09-271-5/+7
| | | | | | | | | | Some functions and variables are only used if the configuration selects HAVE_CLK. Protect them with a corresponding #ifdef CONFIG_HAVE_CLK block to avoid compiler warnings. Signed-off-by: Thierry Reding <treding@nvidia.com> [wsa: added marker to #endif] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: s3c2410: fix clk_disable/clk_unprepare WARNingsKim Phillips2013-09-271-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit d16933b33914a6dff38a4ecbe8edce44a17898e8 "i2c: s3c2410: Move location of clk_prepare_enable() call in probe function" refactored clk_enable and clk_disable calls yet neglected to remove the clk_disable_unprepare call in the module's remove(). It helps remove warnings on an arndale during unbind: echo 12c90000.i2c > /sys/bus/platform/devices/12c90000.i2c/driver/unbind ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2548 at drivers/clk/clk.c:842 clk_disable+0x18/0x24() Modules linked in: CPU: 0 PID: 2548 Comm: bash Not tainted 3.11.0-next-20130916-00003-gf4bddbc #6 [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14) [<c00117d0>] (show_stack+0x10/0x14) from [<c0361be8>] (dump_stack+0x6c/0xac) [<c0361be8>] (dump_stack+0x6c/0xac) from [<c001d864>] (warn_slowpath_common+0x64/0x88) [<c001d864>] (warn_slowpath_common+0x64/0x88) from [<c001d8a4>] (warn_slowpath_null+0x1c/0x24) [<c001d8a4>] (warn_slowpath_null+0x1c/0x24) from [<c02c4a64>] (clk_disable+0x18/0x24) [<c02c4a64>] (clk_disable+0x18/0x24) from [<c028d0b0>] (s3c24xx_i2c_remove+0x28/0x70) [<c028d0b0>] (s3c24xx_i2c_remove+0x28/0x70) from [<c0217a10>] (platform_drv_remove+0x18/0x1c) [<c0217a10>] (platform_drv_remove+0x18/0x1c) from [<c0216358>] (__device_release_driver+0x58/0xb4) [<c0216358>] (__device_release_driver+0x58/0xb4) from [<c02163d0>] (device_release_driver+0x1c/0x28) [<c02163d0>] (device_release_driver+0x1c/0x28) from [<c02153c0>] (unbind_store+0x58/0x90) [<c02153c0>] (unbind_store+0x58/0x90) from [<c0214c90>] (drv_attr_store+0x20/0x2c) [<c0214c90>] (drv_attr_store+0x20/0x2c) from [<c01032c0>] (sysfs_write_file+0x168/0x198) [<c01032c0>] (sysfs_write_file+0x168/0x198) from [<c00ae1c0>] (vfs_write+0xb0/0x194) [<c00ae1c0>] (vfs_write+0xb0/0x194) from [<c00ae594>] (SyS_write+0x3c/0x70) [<c00ae594>] (SyS_write+0x3c/0x70) from [<c000e3e0>] (ret_fast_syscall+0x0/0x30) ---[ end trace 4c9f9403066f57a6 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2548 at drivers/clk/clk.c:751 clk_unprepare+0x14/0x1c() Modules linked in: CPU: 0 PID: 2548 Comm: bash Tainted: G W 3.11.0-next-20130916-00003-gf4bddbc #6 [<c0014d48>] (unwind_backtrace+0x0/0xf8) from [<c00117d0>] (show_stack+0x10/0x14) [<c00117d0>] (show_stack+0x10/0x14) from [<c0361be8>] (dump_stack+0x6c/0xac) [<c0361be8>] (dump_stack+0x6c/0xac) from [<c001d864>] (warn_slowpath_common+0x64/0x88) [<c001d864>] (warn_slowpath_common+0x64/0x88) from [<c001d8a4>] (warn_slowpath_null+0x1c/0x24) [<c001d8a4>] (warn_slowpath_null+0x1c/0x24) from [<c02c5834>] (clk_unprepare+0x14/0x1c) [<c02c5834>] (clk_unprepare+0x14/0x1c) from [<c028d0b8>] (s3c24xx_i2c_remove+0x30/0x70) [<c028d0b8>] (s3c24xx_i2c_remove+0x30/0x70) from [<c0217a10>] (platform_drv_remove+0x18/0x1c) [<c0217a10>] (platform_drv_remove+0x18/0x1c) from [<c0216358>] (__device_release_driver+0x58/0xb4) [<c0216358>] (__device_release_driver+0x58/0xb4) from [<c02163d0>] (device_release_driver+0x1c/0x28) [<c02163d0>] (device_release_driver+0x1c/0x28) from [<c02153c0>] (unbind_store+0x58/0x90) [<c02153c0>] (unbind_store+0x58/0x90) from [<c0214c90>] (drv_attr_store+0x20/0x2c) [<c0214c90>] (drv_attr_store+0x20/0x2c) from [<c01032c0>] (sysfs_write_file+0x168/0x198) [<c01032c0>] (sysfs_write_file+0x168/0x198) from [<c00ae1c0>] (vfs_write+0xb0/0x194) [<c00ae1c0>] (vfs_write+0xb0/0x194) from [<c00ae594>] (SyS_write+0x3c/0x70) [<c00ae594>] (SyS_write+0x3c/0x70) from [<c000e3e0>] (ret_fast_syscall+0x0/0x30) ---[ end trace 4c9f9403066f57a7 ]--- Signed-off-by: Kim Phillips <kim.phillips@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* Remove GENERIC_HARDIRQ config optionMartin Schwidefsky2013-09-132-5/+2
| | | | | | | | After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* i2c: davinci: Fix bad dev_get_platdata() conversionOlof Johansson2013-09-101-1/+1
| | | | | | | | | | | | | commit 6d4028c644e (i2c: use dev_get_platdata()) did a bad conversion of this one case: drivers/i2c/busses/i2c-davinci.c: In function 'davinci_i2c_probe': drivers/i2c/busses/i2c-davinci.c:665:2: warning: passing argument 1 of 'dev_get_platdata' from incompatible pointer type [enabled by default] Reviewed-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Olof Johansson <olof@lixom.net>
* i2c: rcar: add rcar-H2 supportNguyen Viet Dung2013-09-041-2/+33
| | | | | | | This patch modify I2C driver of rcar-H1 to usable on both rcar-H1 and rcar-H2. Signed-off-by: Nguyen Viet Dung <nv-dung@jinso.co.jp> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: sirf: retry 3 times as sometimes we get random noack and timeoutZhiwu Song2013-08-281-1/+2
| | | | | | | | | let i2c core retry 3 times as sometimes we get random noack and timeout even when we access an existing i2c client. Signed-off-by: Zhiwu Song <Zhiwu.Song@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: sirf: support reverse direction of addressZhiwu Song2013-08-281-0/+4
| | | | | | | | | if users set I2C_M_REV_DIR_ADDR, revert the direction of address. Signed-off-by: Zhiwu Song <Zhiwu.Song@csr.com> Signed-off-by: Rongjun Ying <rongjun.ying@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: sirf: fix the typo for setting bitrate to less than 100kZhiwu Song2013-08-281-1/+1
| | | | | | | | | there is a typo before, it makes the final bitrate wrong, this patch fixes it. Signed-off-by: Zhiwu Song <Zhiwu.Song@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: sirf: we need to wait I2C_RESET status in resumeZhiwu Song2013-08-281-0/+2
| | | | | | | | this fixes the issue that we lost to wait the i2c reset finished. Signed-off-by: Zhiwu Song <Zhiwu.Song@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: sirf: reset i2c controller early after we get a noackZhiwu Song2013-08-281-9/+18
| | | | | | | | | | Due to hardware ANOMALY, we need to reset I2C earlier after we get NOACK while accessing non-existing clients, otherwise we will get errors even we access existing clients later Signed-off-by: Zhiwu Song <Zhiwu.Song@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: designware: get SDA hold time, HCNT and LCNT configuration from ACPIMika Westerberg2013-08-281-0/+34
| | | | | | | | | | | | Some Intel LPSS I2C devices make the SDA hold time and *CNT parameters available via SSCN (standard mode) and FMCN (fast mode) ACPI methods. Implement support for this so that we check whether an ACPI method exists and if it does, fill in the SDA hold time and *CNT values to the device private structure for core to use. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: designware: make HCNT/LCNT values configurableMika Westerberg2013-08-282-0/+23
| | | | | | | | | | | | | | | | | | | | The DesignWare I2C controller has high count (HCNT) and low count (LCNT) registers for each of the I2C speed modes (standard and fast). These registers are programmed based on the input clock speed in the driver. The current code calculates these values based on the input clock speed and tries hard to meet the I2C bus timing requirements. This could result non-optimal values with regarding to the bus speed. For example on Intel BayTrail we get bus speed of 315.41kHz which is ~20% slower than we would expect (400kHz) in fast mode (even though the timing requirements are met). This patch makes it possible for the platform code to pass more optimal HCNT/LCNT values to the core driver if they are known beforehand. If these are not set we use the calculated and more conservative values. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Shinya Kuribayashi <skuribay@pobox.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: mpc: cleanup clock API useGerhard Sittig2013-08-281-0/+24
| | | | | | | | | | | | | | | make the MPC I2C driver get, prepare and enable the gated clock item for register access during probe; disable and unprepare the clock upon remove(), put is done by the devm approach; hold a reference to the clock over the period of use clock lookup is non-fatal in this implementation as not all platforms may provide clock specs in their device tree, but failure to enable a clock when specified is considered fatal Signed-off-by: Gerhard Sittig <gsi@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: pnx: fix error return code in i2c_pnx_probe()Wei Yongjun2013-08-281-1/+2
| | | | | | | | | Fix to return a negative error code in the irq get error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> [wsa: fixed wrong exit point, too] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: ismt: add error return code in probe()Wolfram Sang2013-08-281-0/+1
| | | | | | | Return error code in the error case, and not success. Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: move ACPI helpers into the coreMika Westerberg2013-08-232-1/+91
| | | | | | | | | | | | | This follows what has already been done for the DeviceTree helpers. Move the ACPI helpers from drivers/acpi/acpi_i2c.c to the I2C core and update documentation accordingly. This also solves a problem reported by Jerry Snitselaar that we can't build the ACPI I2C helpers as a module. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: move OF helpers into the coreWolfram Sang2013-08-2331-82/+112
| | | | | | | | | | I2C of helpers used to live in of_i2c.c but experience (from SPI) shows that it is much cleaner to have this in the core. This also removes a circular dependency between the helpers and the core, and so we can finally register child nodes in the core instead of doing this manually in each driver. So, fix the drivers and documentation, too. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: mv64xxx: Fix timing issue on Armada XP (errata FE-8471889)Gregory CLEMENT2013-08-231-2/+13
| | | | | | | | | | | | | | | | | All the Armada XP (mv78230, mv78260 and mv78460) have a silicon issue in the I2C controller which violate the i2c repeated start timing. The I2C standard requires a minimum of 4.7us for the repeated start condition whereas the I2C controller of the Armada XP this time is 2.9us. So this patch adds a 5us delay for the start case only if the the compatible i2c-mv78230 is set. Based on the initals patches from Zbigniew Bodek Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Zbigniew Bodek <zbb@semihalf.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: mv64xxx: Add I2C Transaction Generator supportGregory CLEMENT2013-08-231-11/+182
| | | | | | | | | | | | | | | The I2C Transaction Generator offloads CPU from managing I2C transfer step by step. This feature is currently only available on Armada XP, so usage of this mechanism is activated through device tree. Based on the work of Piotr Ziecik and rewrote to use the new way of handling multiples i2c messages. Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: powermac: fix return path on errorWolfram Sang2013-08-211-1/+2
| | | | | | | We want to bail out immediately if i2c_add_adapter failed and not try to register child nodes with a nilled adapter structure. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: tiny-usb: do not use stack as URB transfer_bufferJussi Kivilinna2013-08-191-15/+34
| | | | | | | | | | Patch fixes i2c-tiny-usb not to use stack as URB transfer_buffer. URB buffers need to be DMA-able, which stack is not. Patch is only compile tested. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: use dev_get_platdata()Jingoo Han2013-08-1925-35/+40
| | | | | | | | Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: omap: query STP always when NACK is receivedGrygorii Strashko2013-08-191-5/+4
| | | | | | | | | | | | | | | | | | | | | | | According to I2C specification the NACK should be handled as folowing: "When SDA remains HIGH during this ninth clock pulse, this is defined as the Not Acknowledge signal. The master can then gene rate either a STOP condition to abort the transfer, or a repeated START condition to start a new transfer." [http://www.nxp.com/documents/user_manual/UM10204.pdf] The same is recomened by TI I2C wiki: http://processors.wiki.ti.com/index.php/I2C_Tips Currently, the OMAP I2C driver interrupts I2C trunsfer in case of NACK, but It queries Stop condition OMAP_I2C_CON_REG.STP=1 only if NACK has been received during the last message transmitting/recieving. This may lead to stuck Bus in "Bus Busy" until I2C IP reset (idle/enable). Hence, fix it by querying Stop condition (STP) always when NACK is received. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Hein Tibosch <hein_tibosch@yahoo.es> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: mxs: fix broken timing calculationLothar Waßmann2013-08-161-24/+63
| | | | | | | | | | | | | | | | | | | | The timing calculation is rather bogus and gives extremely wrong results for higher frequencies (on an i.MX28). E.g. instead of 400 kHz I measured 770 kHz. Implement a calculation that adheres to the I2C spec and gives exact results for I2C frequencies from 12.56 kHz to 960 kHz. Also the bus_free and leadin parameters are programmed according to the I2C spec for standard and fast mode. This was tested on a Ka-Ro TX28 module with a DS1339, TSC2007, PCA9554 and SGTL5000 client. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Acked-by: Marek Vasut <marex@denx.de> [wsa: patch fixes whitespace issue, too] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* drivers/i2c/busses/i2c-ocores.c: simplify use of devm_ioremap_resourceJulia Lawall2013-08-151-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove unneeded error handling on the result of a call to platform_get_resource when the value is passed to devm_ioremap_resource. Move the call to platform_get_resource adjacent to the call to devm_ioremap_resource to make the connection between them more clear. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression pdev,res,n,e,e1; expression ret != 0; identifier l; @@ - res = platform_get_resource(pdev, IORESOURCE_MEM, n); ... when != res - if (res == NULL) { ... \(goto l;\|return ret;\) } ... when != res + res = platform_get_resource(pdev, IORESOURCE_MEM, n); e = devm_ioremap_resource(e1, res); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: imx: Add Vybrid VF610 I2C controller supportJingchang Lu2013-08-151-0/+32
| | | | | | | | | | Add Freescale Vybrid VF610 I2C controller support to imx I2C driver framework. Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Jingchang Lu <b35083@freescale.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: imx: add struct to hold more configurable quirksJingchang Lu2013-08-151-25/+52
| | | | | | | | | | This add struct imx_i2c_hwdata to hold more quirks data which may vary between SoCs, thus the driver can operate on more differences to support more SoCs. Signed-off-by: Jingchang Lu <b35083@freescale.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: imx: add INT flag and IEN bit operatation codesJingchang Lu2013-08-151-5/+22
| | | | | | | | | | | | | | This add bits operation macro that differ between SoCs. Interrupt flags clear operation in I2SR differ between SoCs: write zero to clear(w0c) INT flag on i.MX, but write one to clear(w1c) INT flag on Vybrid. I2C module enable operation in I2CR also differ between SoCs: set I2CR_IEN bit enable the module on i.MX, but clear I2CR_IEN bit enable the module on Vybrid. Signed-off-by: Jingchang Lu <b35083@freescale.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: imx: change register offset representationJingchang Lu2013-08-151-7/+16
| | | | | | | | | | | | | the I2C register offset may different between SoCs, to provid support for all these chips, split the register offset into a fixed base address and a variable shift value, then the full register offset will be calculated by reg_off = ( reg_base_addr << reg_shift) Signed-off-by: Jingchang Lu <b35083@freescale.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: imx: wrap registers read/write to inline functionJingchang Lu2013-08-151-34/+46
| | | | | | | | | | wrap the readb(), writeb() into inline function calls. It would make the driver more clearer to support platform with different register offset. Signed-off-by: Jingchang Lu <b35083@freescale.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: imx: don't change platform device id_entry directlyJingchang Lu2013-08-151-2/+6
| | | | | | | | | | | The id_entry field should be changed by platform driver core, driver should prevent changing it derectly. Use local variable to save and extract platform_device_id info of the dts devices instead. Signed-off-by: Jingchang Lu <b35083@freescale.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: imx: enable clk before write to registersJingchang Lu2013-08-151-0/+6
| | | | | | | | | | The module clk should be enabled before write to its register in probe(), and the clk can be disabled after. Signed-off-by: Jingchang Lu <b35083@freescale.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: imx: use struct representing i2c clk{div, val} pairJingchang Lu2013-08-151-7/+13
| | | | | | | | | using struct representing the i2c clk{div, val} pair would make the i2c_clk_div array more clear. Signed-off-by: Jingchang Lu <b35083@freescale.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: piix4: Add support for secondary SMBus on AMD SB800 and AMD FCH chipsetsRudolf Marek2013-08-151-10/+31
| | | | | | | | | Add support for the secondary SMBus controller on the AMD SB800 and AMD FCH chipsets. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Tested-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: Improve logging on failure to probe for ->class devicesAndy Lutomirski2013-08-151-1/+2
| | | | | | | | | While writing the i2c-imc driver, I noticed that the warning message when the i2c core can't figure out how to probe is mostly useless. This trivial patch improves it. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: davinci: Allow i2c driver available for keystone platformsSantosh Shilimkar2013-08-151-1/+1
| | | | | | | | Keystone SOCs uses the same I2C IP as available on DaVinci SOCs. Update the config so that ARCH_KEYSTONE can use it. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: davinci: remove useless mach/hardware includeSantosh Shilimkar2013-08-151-2/+0
| | | | | | | | | | This driver no longer uses definitions from mach/hardware.h. On the other hand, including this header breaks this driver on non-davinci platforms which don't have such a header. Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: i2c-bfin-twi: add CONFIG_PM_SLEEP to suspend/resume functionsJingoo Han2013-08-151-1/+6
| | | | | | | | | | | | | Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/i2c/busses/i2c-bfin-twi.c:585:12: warning: 'i2c_bfin_twi_suspend' defined but not used [-Wunused-function] drivers/i2c/busses/i2c-bfin-twi.c:600:12: warning: 'i2c_bfin_twi_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: puv3: add CONFIG_PM_SLEEP to suspend functionJingoo Han2013-08-151-1/+1
| | | | | | | | | | | | Add CONFIG_PM_SLEEP to suspend function to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/i2c/busses/i2c-puv3.c:249:12: warning: 'puv3_i2c_suspend' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: pnx: add CONFIG_PM_SLEEP to suspend/resume functionsJingoo Han2013-08-151-1/+1
| | | | | | | | | | | | | Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/i2c/busses/i2c-pnx.c:599:12: warning: 'i2c_pnx_controller_suspend' defined but not used [-Wunused-function] drivers/i2c/busses/i2c-pnx.c:608:12: warning: 'i2c_pnx_controller_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: stu300: add CONFIG_PM_SLEEP to suspend/resume functionsJingoo Han2013-08-151-1/+1
| | | | | | | | | | | | | Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/i2c/busses/i2c-stu300.c:945:12: warning: 'stu300_suspend' defined but not used [-Wunused-function] drivers/i2c/busses/i2c-stu300.c:954:12: warning: 'stu300_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: ocores: add CONFIG_PM_SLEEP to suspend/resume functionsJingoo Han2013-08-151-1/+1
| | | | | | | | | | | | | Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/i2c/busses/i2c-ocores.c:460:12: warning: 'ocores_i2c_suspend' defined but not used [-Wunused-function] drivers/i2c/busses/i2c-ocores.c:471:12: warning: 'ocores_i2c_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: designware: add CONFIG_PM_SLEEP to suspend/resume functionsJingoo Han2013-08-151-3/+6
| | | | | | | | | | | | | Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/i2c/busses/i2c-designware-platdrv.c:211:12: warning: 'dw_i2c_suspend' defined but not used [-Wunused-function] drivers/i2c/busses/i2c-designware-platdrv.c:221:12: warning: 'dw_i2c_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: i2c-mpc: add CONFIG_PM_SLEEP to suspend/resume functionsJingoo Han2013-08-151-6/+7
| | | | | | | | | | | | | | | | Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/i2c/busses/i2c-mpc.c:724:12: warning: 'mpc_i2c_suspend' defined but not used [-Wunused-function] drivers/i2c/busses/i2c-mpc.c:734:12: warning: 'mpc_i2c_resume' defined but not used [-Wunused-function] Also, this patch makes mpc_i2c_pm_ops static, because mpc_i2c_pm_ops is not exported. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* i2c: mxs: Check the return value from stmp_reset_block()Fabio Estevam2013-08-151-7/+19
| | | | | | | | | stmp_reset_block() may fail, so let's check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* drivers/i2c/busses: don't check resource with devm_ioremap_resourceWolfram Sang2013-08-071-3/+0
| | | | | | | | devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Linus Walleij <linus.walleij@linaro.org>
* drivers/i2c/busses: don't use devm_pinctrl_get_select_default() in probeWolfram Sang2013-08-071-13/+0
| | | | | | | | Since commit ab78029 (drivers/pinctrl: grab default handles from device core), we can rely on device core for setting the default pins. Compile tested only. Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 20:50:03 +0000