summaryrefslogtreecommitdiffstats
path: root/drivers/iommu/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* iommu/hyper-v: Add Hyper-V stub IOMMU driverLan Tianyu2019-02-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | On the bare metal, enabling X2APIC mode requires interrupt remapping function which helps to deliver irq to cpu with 32-bit APIC ID. Hyper-V doesn't provide interrupt remapping function so far and Hyper-V MSI protocol already supports to deliver interrupt to the CPU whose virtual processor index is more than 255. IO-APIC interrupt still has 8-bit APIC ID limitation. This patch is to add Hyper-V stub IOMMU driver in order to enable X2APIC mode successfully in Hyper-V Linux guest. The driver returns X2APIC interrupt remapping capability when X2APIC mode is available. Otherwise, it creates a Hyper-V irq domain to limit IO-APIC interrupts' affinity and make sure cpus assigned with IO-APIC interrupt have 8-bit APIC ID. Define 24 IO-APIC remapping entries because Hyper-V only expose one single IO-APIC and one IO-APIC has 24 pins according IO-APIC spec( https://pdos.csail.mit.edu/6.828/2016/readings/ia32/ioapic.pdf). Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/vt-d: Enable base Intel IOMMU debugfs supportSohil Mehta2018-09-251-0/+1
| | | | | | | | | | | | | | | | Add a new config option CONFIG_INTEL_IOMMU_DEBUGFS and do the base enabling for Intel IOMMU debugfs. Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Co-Developed-by: Gayatri Kammela <gayatri.kammela@intel.com> Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Sohil Mehta <sohil.mehta@intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
*-. Merge branches 'arm/shmobile', 'arm/renesas', 'arm/msm', 'arm/smmu', ↵Joerg Roedel2018-08-081-1/+3
|\ \ | | | | | | | | | 'arm/omap', 'x86/amd', 'x86/vt-d' and 'core' into next
| | * iommu/amd: Add basic debugfs infrastructure for AMD IOMMUGary R Hook2018-07-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Implement a skeleton framework for debugfs support in the AMD IOMMU. Add an AMD-specific Kconfig boolean that depends upon general enablement of DebugFS in the IOMMU. Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
| | * iommu: Enable debugfs exposure of IOMMU driver internalsGary R Hook2018-07-061-0/+1
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Provide base enablement for using debugfs to expose internal data of an IOMMU driver. When called, create the /sys/kernel/debug/iommu directory. Emit a strong warning at boot time to indicate that this feature is enabled. This function is called from iommu_init, and creates the initial DebugFS directory. Drivers may then call iommu_debugfs_new_driver_dir() to instantiate a device-specific directory to expose internal data. It will return a pointer to the new dentry structure created in /sys/kernel/debug/iommu, or NULL in the event of a failure. Since the IOMMU driver can not be removed from the running system, there is no need for an "off" function. Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
| * iommu/vt-d: Global PASID name spaceLu Baolu2018-07-201-1/+1
|/ | | | | | | | | | | | | | | | | | | | This adds the system wide PASID name space for the PASID allocation. Currently we are using per IOMMU PASID name spaces which are not suitable for some use cases. For an example, one application (associated with a PASID) might talk to two physical devices simultaneously while the two devices could reside behind two different IOMMU units. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Liu Yi L <yi.l.liu@intel.com> Suggested-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Liu Yi L <yi.l.liu@intel.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iommu/qcom: Add qcom_iommuRob Clark2017-08-151-0/+1
| | | | | | | | | | | | | | | | An iommu driver for Qualcomm "B" family devices which do implement the ARM SMMU spec, but not in a way that is compatible with how the arm-smmu driver is designed. It seems SMMU_SCR1.GASRAE=1 so the global register space is not accessible. This means it needs to get configuration from devicetree instead of setting it up dynamically. In the end, other than register definitions, there is not much code to share with arm-smmu (other than what has already been refactored out into the pgtable helpers). Signed-off-by: Rob Clark <robdclark@gmail.com> Tested-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
*-. Merge branches 'x86/amd', 'x86/vt-d', 'arm/exynos', 'arm/mediatek', ↵Joerg Roedel2016-07-261-1/+2
|\ \ | | | | | | | | | 'arm/msm', 'arm/rockchip', 'arm/smmu' and 'core' into next
| | * iommu/msm: Move the contents from msm_iommu_dev.c to msm_iommu.cSricharan R2016-06-211-1/+1
| |/ |/| | | | | | | | | | | | | | | | | There are only two functions left in msm_iommu_dev.c. Move it to msm_iommu.c and delete the file. Signed-off-by: Sricharan R <sricharan@codeaurora.org> Tested-by: Archit Taneja <architt@codeaurora.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
| * iommu/mediatek: add support for mtk iommu generation one HWHonghui Zhang2016-06-211-0/+1
|/ | | | | | | | | | | | | | | | | | Mediatek SoC's M4U has two generations of HW architcture. Generation one uses flat, one layer pagetable, and was shipped with ARM architecture, it only supports 4K size page mapping. MT2701 SoC uses this generation one m4u HW. Generation two uses the ARM short-descriptor translation table format for address translation, and was shipped with ARM64 architecture, MT8173 uses this generation two m4u HW. All the two generation iommu HW only have one iommu domain, and all its iommu clients share the same iova address. These two generation m4u HW have slit different register groups and register offset, but most register names are the same. This patch add iommu support for mediatek SoC mt2701. Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/mediatek: Add mt8173 IOMMU driverYong Wu2016-02-251-0/+1
| | | | | | | | | This patch adds support for mediatek m4u (MultiMedia Memory Management Unit). Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/io-pgtable: Add ARMv7 short descriptor supportRobin Murphy2016-02-171-0/+1
| | | | | | | | | | | | Add a nearly-complete ARMv7 short descriptor implementation, omitting only a few legacy and CPU-centric aspects which shouldn't be necessary for IOMMU API use anyway. Reviewed-by: Yong Wu <yong.wu@mediatek.com> Tested-by: Yong Wu <yong.wu@mediatek.com> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
* iommu/shmobile: Remove unused Renesas IPMMU/IPMMUI driverGeert Uytterhoeven2015-12-141-2/+0
| | | | | | | | | | | | | | As of commit 44d88c754e57a6d9 ("ARM: shmobile: Remove legacy SoC code for R-Mobile A1"), the Renesas IPMMU/IPMMUI driver is no longer used. In theory it could still be used on SH-Mobile AG5 and R-Mobile A1 SoCs, but that requires adding DT support to the driver, which is not planned. Remove the driver, it can be resurrected from git history when needed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* Merge tag 'iommu-updates-v4.4' of ↵Linus Torvalds2015-11-051-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: "This time including: - A new IOMMU driver for s390 pci devices - Common dma-ops support based on iommu-api for ARM64. The plan is to use this as a basis for ARM32 and hopefully other architectures as well in the future. - MSI support for ARM-SMMUv3 - Cleanups and dead code removal in the AMD IOMMU driver - Better RMRR handling for the Intel VT-d driver - Various other cleanups and small fixes" * tag 'iommu-updates-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (41 commits) iommu/vt-d: Fix return value check of parse_ioapics_under_ir() iommu/vt-d: Propagate error-value from ir_parse_ioapic_hpet_scope() iommu/vt-d: Adjust the return value of the parse_ioapics_under_ir iommu: Move default domain allocation to iommu_group_get_for_dev() iommu: Remove is_pci_dev() fall-back from iommu_group_get_for_dev iommu/arm-smmu: Switch to device_group call-back iommu/fsl: Convert to device_group call-back iommu: Add device_group call-back to x86 iommu drivers iommu: Add generic_device_group() function iommu: Export and rename iommu_group_get_for_pci_dev() iommu: Revive device_group iommu-ops call-back iommu/amd: Remove find_last_devid_on_pci() iommu/amd: Remove first/last_device handling iommu/amd: Initialize amd_iommu_last_bdf for DEV_ALL iommu/amd: Cleanup buffer allocation iommu/amd: Remove cmd_buf_size and evt_buf_size from struct amd_iommu iommu/amd: Align DTE flag definitions iommu/amd: Remove old alias handling code iommu/amd: Set alias DTE in do_attach/do_detach iommu/amd: WARN when __[attach|detach]_device are called with irqs enabled ...
| *-. Merge branches 'x86/vt-d', 'arm/omap', 'arm/smmu', 's390', 'core' and ↵Joerg Roedel2015-11-021-0/+2
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | 'x86/amd' into next Conflicts: drivers/iommu/amd_iommu_types.h
| | | * iommu: Implement common IOMMU ops for DMA mappingRobin Murphy2015-10-151-0/+1
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Taking inspiration from the existing arch/arm code, break out some generic functions to interface the DMA-API to the IOMMU-API. This will do the bulk of the heavy lifting for IOMMU-backed dma-mapping. Since associating an IOVA allocator with an IOMMU domain is a fairly common need, rather than introduce yet another private structure just to do this for ourselves, extend the top-level struct iommu_domain with the notion. A simple opaque cookie allows reuse by other IOMMU API users with their various different incompatible allocator types. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
| | * iommu/s390: Add iommu api for s390 pci devicesGerald Schaefer2015-10-061-0/+1
| |/ | | | | | | | | | | | | | | This adds an IOMMU API implementation for s390 PCI devices. Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* / iommu/vt-d: Add initial support for PASID tablesDavid Woodhouse2015-10-151-0/+1
|/ | | | | | Add CONFIG_INTEL_IOMMU_SVM, and allocate PASID tables on supported hardware. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* iommu/arm-smmu: Add initial driver support for ARM SMMUv3 devicesWill Deacon2015-05-291-0/+1
| | | | | | | | | | | | | | | | | | | Version three of the ARM SMMU architecture introduces significant changes and improvements over previous versions of the specification, necessitating a new driver in the Linux kernel. The main change to the programming interface is that the majority of the configuration data has been moved from MMIO registers to in-memory data structures, with communication between the CPU and the SMMU being mediated via in-memory circular queues. This patch adds an initial driver for SMMUv3 to Linux. We currently support pinned stage-1 (DMA) and stage-2 (KVM VFIO) mappings using the generic IO-pgtable code. Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
*-. Merge branches 'arm/renesas', 'arm/smmu', 'arm/omap', 'ppc/pamu', 'x86/amd' ↵Joerg Roedel2015-02-041-1/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | and 'core' into next Conflicts: drivers/iommu/Kconfig drivers/iommu/Makefile
| | * iommu: Allow building iova.c independentlyRobin Murphy2015-01-191-1/+2
| |/ | | | | | | | | | | | | | | In preparation for sharing the IOVA allocator, split it out under its own Kconfig symbol. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* | iommu: add ARM LPAE page table allocatorWill Deacon2015-01-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | A number of IOMMUs found in ARM SoCs can walk architecture-compatible page tables. This patch adds a generic allocator for Stage-1 and Stage-2 v7/v8 long-descriptor page tables. 4k, 16k and 64k pages are supported, with up to 4-levels of walk to cover a 48-bit address space. Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
* | iommu: introduce generic page table allocation frameworkWill Deacon2015-01-191-0/+1
|/ | | | | | | | | | | | | | | | This patch introduces a generic framework for allocating page tables for an IOMMU. There are a number of reasons we want to do this: - It avoids duplication of complex table management code in IOMMU drivers that use the same page table format - It removes any coupling with the CPU table format (and even the architecture!) - It defines an API for IOMMU TLB maintenance Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
*-. Merge branches 'arm/omap', 'arm/msm', 'arm/rockchip', 'arm/renesas', ↵Joerg Roedel2014-12-021-0/+1
|\ \ | | | | | | | | | | | | | | | | | | 'arm/smmu', 'x86/vt-d', 'x86/amd' and 'core' into next Conflicts: drivers/iommu/arm-smmu.c
| | * iommu/rockchip: rk3288 iommu driverDaniel Kurtz2014-11-031-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The rk3288 has several iommus. Each iommu belongs to a single master device. There is one device (ISP) that has two slave iommus, but that case is not yet supported by this driver. At subsys init, the iommu driver registers itself as the iommu driver for the platform bus. The master devices find their slave iommus using the "iommus" field in their devicetree description. Since each slave iommu belongs to exactly one master, their is no additional data needed at probe to associate a slave with its master. An iommu device's power domain, clock and irq are all shared with its master device, and the master device must be careful to attach from the iommu only after powering and clocking it (and leave it powered and clocked before detaching). Because their is no guarantee what the status of the iommu is at probe, and since the driver does not even know if the device is powered, we delay requesting its irq until the master device attaches, at which point we have a guarantee that the device is powered and clocked and we can reset it and disable its interrupt mask. An iommu_domain describes a virtual iova address space. Each iommu_domain has a corresponding page table that lists the mappings from iova to physical address. For the rk3288 iommu, the page table has two levels: The Level 1 "directory_table" has 1024 4-byte dte entries. Each dte points to a level 2 "page_table". Each level 2 page_table has 1024 4-byte pte entries. Each pte points to a 4 KiB page of memory. An iommu_domain is created when a dma_iommu_mapping is created via arm_iommu_create_mapping. Master devices can then attach themselves to this mapping (or attach the mapping to themselves?) by calling arm_iommu_attach_device(). This in turn instructs the iommu driver to write the page table's physical address into the slave iommu's "Directory Table Entry" (DTE) register. In fact multiple master devices, each with their own slave iommu device, can all attach to the same mapping. The iommus for these devices will share the same iommu_domain and therefore point to the same page table. Thus, the iommu domain maintains a list of iommu devices which are attached. This driver relies on the iommu core to ensure that all devices have detached before destroying a domain. v6: - add .add/remove_device() callbacks. - parse platform_device device tree nodes for "iommus" property - store platform device pointer as group iommudata - Check for existence of iommu group instead of relying on a dev_get_drvdata() to return NULL for a NULL device. v7: - fixup some strings. - In rk_iommu_disable_paging() # and % were reversed. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Simon Xue <xxm@rock-chips.com> Reviewed-by: Grant Grundler <grundler@chromium.org> Reviewed-by: Stéphane Marchesin <marcheu@chromium.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* / iommu/omap: Consolidate OMAP IOMMU modulesSuman Anna2014-10-231-1/+0
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The OMAP IOMMU driver was originally designed as modules, and split into a core module and a thin arch-specific module through the OMAP arch-specific struct iommu_functions, to scale for both OMAP1 and OMAP2+ IOMMU variants. The driver can only be built for OMAP2+ platforms currently, and also can only be built-in after the adaptation to generic IOMMU API. The OMAP1 variant was never added and will most probably be never added (the code for the only potential user, its parent, DSP processor has already been cleaned up). So, consolidate the OMAP2 specific omap-iommu2 module into the core OMAP IOMMU driver - this eliminates the arch-specific ops structure and simplifies the driver into a single module that only implements the generic IOMMU API's iommu_ops. The following are the main changes: - omap-iommu2 module is completely eliminated, with the common definitions moved to the internal omap-iommu.h, and the ops implementations moved into omap-iommu.c - OMAP arch-specific struct iommu_functions is also eliminated, with the ops implementations directly absorbed into the calling functions - iotlb_alloc_cr() is no longer inlined and defined only when PREFETCH_IOTLB is defined - iotlb_dump_cr() is similarly defined only when CONFIG_OMAP_IOMMU_DEBUG is defined - Elimination of the OMAP IOMMU exported functions to register the arch ops, omap_install_iommu_arch() & omap_uninstall_iommu_arch() - Any stale comments about OMAP1 are also cleaned up Signed-off-by: Suman Anna <s-anna@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
*-. Merge branches 'x86/vt-d', 'x86/amd', 'arm/omap', 'ppc/pamu', 'arm/smmu', ↵Joerg Roedel2014-07-311-1/+0
|\ \ | | | | | | | | | 'arm/exynos' and 'core' into next
| | * iommu/omap: Remove virtual memory managerLaurent Pinchart2014-07-291-1/+0
| |/ | | | | | | | | | | | | | | | | The OMAP3 ISP driver was the only user of the OMAP IOVMM API. Now that is has been ported to the DMA API, remove the unused virtual memory manager. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* / iommu: Add sysfs support for IOMMUsAlex Williamson2014-07-041-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | IOMMUs currently have no common representation to userspace, most seem to have no representation at all aside from a few printks on bootup. There are however features of IOMMUs that are useful to know about. For instance the IOMMU might support superpages, making use of processor large/huge pages more important in a device assignment scenario. It's also useful to create cross links between devices and IOMMU hardware units, so that users might be able to load balance their devices to avoid thrashing a single hardware unit. This patch adds a device create and destroy interface as well as device linking, making it very lightweight for an IOMMU driver to add basic support. IOMMU drivers can provide additional attributes automatically by using an attribute_group. The attributes exposed are expected to be relatively device specific, the means to retrieve them certainly are, so there are currently no common attributes for the new class created here. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu: Add driver for Renesas VMSA-compatible IPMMULaurent Pinchart2014-05-261-0/+1
| | | | | Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu: Add event tracing feature to iommuShuah Khan2013-09-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add tracing feature to iommu to report various iommu events. Classes iommu_group, iommu_device, and iommu_map_unmap are defined. iommu_group class events can be enabled to trigger when devices get added to and removed from an iommu group. Trace information includes iommu group id and device name. iommu:add_device_to_group iommu:remove_device_from_group iommu_device class events can be enabled to trigger when devices are attached to and detached from a domain. Trace information includes device name. iommu:attach_device_to_domain iommu:detach_device_from_domain iommu_map_unmap class events can be enabled to trigger when iommu map and unmap iommu ops. Trace information includes iova, physical address (map event only), and size. iommu:map iommu:unmap Signed-off-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
* iommu/fsl: Freescale PAMU driver and iommu implementation.Varun Sethi2013-08-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Following is a brief description of the PAMU hardware: PAMU determines what action to take and whether to authorize the action on the basis of the memory address, a Logical IO Device Number (LIODN), and PAACT table (logically) indexed by LIODN and address. Hardware devices which need to access memory must provide an LIODN in addition to the memory address. Peripheral Access Authorization and Control Tables (PAACTs) are the primary data structures used by PAMU. A PAACT is a table of peripheral access authorization and control entries (PAACE).Each PAACE defines the range of I/O bus address space that is accessible by the LIOD and the associated access capabilities. There are two types of PAACTs: primary PAACT (PPAACT) and secondary PAACT (SPAACT).A given physical I/O device may be able to act as one or more independent logical I/O devices (LIODs). Each such logical I/O device is assigned an identifier called logical I/O device number (LIODN). A LIODN is allocated a contiguous portion of the I/O bus address space called the DSA window for performing DSA operations. The DSA window may optionally be divided into multiple sub-windows, each of which may be used to map to a region in system storage space. The first sub-window is referred to as the primary sub-window and the remaining are called secondary sub-windows. This patch provides the PAMU driver (fsl_pamu.c) and the corresponding IOMMU API implementation (fsl_pamu_domain.c). The PAMU hardware driver (fsl_pamu.c) has been derived from the work done by Ashish Kalra and Timur Tabi. [For iommu group support] Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Timur Tabi <timur@tabi.org> Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
* iommu/arm: Add support for ARM Ltd. System MMU architectureWill Deacon2013-06-251-0/+1
| | | | | | | | | | | | | | This patch adds support for SMMUs implementing the ARM System MMU architecture versions 1 or 2. Both arm and arm64 are supported, although the v7s descriptor format is not used. Cc: Rob Herring <robherring2@gmail.com> Cc: Andreas Herrmann <andreas.herrmann@calxeda.com> Cc: Olav Haugan <ohaugan@codeaurora.org> Cc: Joerg Roedel <joro@8bytes.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Andreas Herrmann <andreas.herrmann@calxeda.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
* iommu/shmobile: Add iommu driver for Renesas IPMMU modulesHideki EIRAKU2013-02-061-0/+2
| | | | | | | | | | | | | | | | | | | This is the Renesas IPMMU driver and IOMMU API implementation. The IPMMU module supports the MMU function and the PMB function. The MMU function provides address translation by pagetable compatible with ARMv6. The PMB function provides address translation including tile-linear translation. This patch implements the MMU function. The iommu driver does not register a platform driver directly because: - the register space of the MMU function and the PMB function have a common register (used for settings flush), so they should ideally have a way to appropriately share this register. - the MMU function uses the IOMMU API while the PMB function does not. - the two functions may be used independently. Signed-off-by: Hideki EIRAKU <hdk@igel.co.jp> Signed-off-by: Joerg Roedel <joro@8bytes.org>
* ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.cTony Lindgren2012-11-201-0/+1
| | | | | | | | | | | | | | | | | This file should not be in arch/arm. Move it to drivers/iommu to allow making most of the header local to drivers/iommu. This is needed as we are removing plat and mach includes from drivers for ARM common zImage support. Cc: Ido Yariv <ido@wizery.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Omar Ramirez Luna <omar.luna@linaro.org> Cc: linux-media@vger.kernel.org Acked-by: Ohad Ben-Cohen <ohad@wizery.com> Acked-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* iommu: Add DMA window parser, of_get_dma_window()Hiroshi Doyu2012-06-251-0/+1
| | | | | | | | | | | | | | This code was based on: "arch/microblaze/kernel/prom_parse.c" "arch/powerpc/kernel/prom_parse.c" Can replace "of_parse_dma_window()" in the above. This supports different formats flexibly. "prefix" can be configured if any. "busno" and "index" are optionally specified. Set NULL and 0 if not used. Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
* Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-05-261-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull arm-soc driver specific updates from Olof Johansson: "These changes are specific to some driver that may be used by multiple boards or socs. The most significant change in here is the move of the samsung iommu code from a platform specific in-kernel interface to the generic iommu subsystem." Fix up trivial conflicts in arch/arm/mach-exynos/Kconfig * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) mmc: dt: Consolidate DT bindings iommu/exynos: Add iommu driver for EXYNOS Platforms ARM: davinci: optimize the DMA ISR ARM: davinci: implement DEBUG_LL port choice ARM: tegra: Add SMMU enabler in AHB ARM: tegra: Add Tegra AHB driver Input: pxa27x_keypad add choice to set direct_key_mask Input: pxa27x_keypad direct key may be low active Input: pxa27x_keypad bug fix for direct_key_mask Input: pxa27x_keypad keep clock on as wakeup source ARM: dt: tegra: pinmux changes for USB ULPI ARM: tegra: add USB ULPI PHY reset GPIO to device tree ARM: tegra: don't hard-code USB ULPI PHY reset_gpio ARM: tegra: change pll_p_out4's rate to 24MHz ARM: tegra: fix pclk rate ARM: tegra: reparent sclk to pll_c_out1 ARM: tegra: Add pllc clock init table ARM: dt: tegra cardhu: basic audio support ARM: dt: tegra30.dtsi: Add audio-related nodes ARM: tegra: add AUXDATA required for audio ...
| * iommu/exynos: Add iommu driver for EXYNOS PlatformsKyongHo Cho2012-05-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the System MMU driver and IOMMU API implementation for EXYNOS SoC platforms. EXYNOS platforms has more than 10 System MMUs dedicated for each multimedia accelerators. The System MMU driver is already in arc/arm/plat-s5p but it is moved to drivers/iommu due to Ohad Ben-Cohen gathered IOMMU drivers there. Any device driver in EXYNOS platforms that needs to control its System MMU must call platform_set_sysmmu() to inform System MMU driver who will control it. platform_set_sysmmu() is defined in <mach/sysmmu.h> Signed-off-by: KyongHo Cho <pullip.cho@samsung.com> Acked-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* | iommu: rename intr_remapping.[ch] to irq_remapping.[ch]Suresh Siddha2012-05-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | Make the file names consistent with the naming conventions of irq subsystem. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Joerg Roedel <joerg.roedel@amd.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
* | iommu/vt-d: Make intr-remapping initialization genericJoerg Roedel2012-05-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces irq_remap_ops to hold implementation specific function pointer to handle interrupt remapping. As the first part the initialization functions for VT-d are converted to these ops. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
* | iommu: Rename intr_remapping files to intel_intr_remappingJoerg Roedel2012-05-071-1/+1
|/ | | | | | | | | | | | | | | | The files contain code mostly relevant for the Intel implementation of interrupt remapping. Make that visible in the file names. Also inline intr_remapping.h into intr_remapping.c because it is only included there and the content is very small. So there is no reason for a seperate header file. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
* ARM: IOMMU: Tegra30: Add iommu_ops for SMMU driverHiroshi DOYU2012-01-261-0/+1
| | | | | | | | | | | Tegra 30 IOMMU H/W, SMMU (System Memory Management Unit). This patch implements struct iommu_ops for SMMU for the upper IOMMU API. This H/W module supports multiple virtual address spaces(domain x4), and manages 2 level H/W translation pagetable. Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
* ARM: IOMMU: Tegra20: Add iommu_ops for GART driverHiroshi DOYU2012-01-261-0/+1
| | | | | | | | | | | | | Tegra 20 IOMMU H/W, GART (Graphics Address Relocation Table). This patch implements struct iommu_ops for GART for the upper IOMMU API. This H/W module supports only single virtual address space(domain), and manages a single level 1-to-1 mapping H/W translation page table. [With small fixes by Joerg Roedel] Signed-off-by: Hiroshi DOYU <hdoyu@nvidia.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
* iommu/amd: Add driver stub for AMD IOMMUv2 supportJoerg Roedel2011-12-121-0/+1
| | | | | | | | Add a Kconfig option for the optional driver. Since it is optional it can be compiled as a module and will only be loaded when required by another driver. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
* Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds2011-10-301-0/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (33 commits) iommu/core: Remove global iommu_ops and register_iommu iommu/msm: Use bus_set_iommu instead of register_iommu iommu/omap: Use bus_set_iommu instead of register_iommu iommu/vt-d: Use bus_set_iommu instead of register_iommu iommu/amd: Use bus_set_iommu instead of register_iommu iommu/core: Use bus->iommu_ops in the iommu-api iommu/core: Convert iommu_found to iommu_present iommu/core: Add bus_type parameter to iommu_domain_alloc Driver core: Add iommu_ops to bus_type iommu/core: Define iommu_ops and register_iommu only with CONFIG_IOMMU_API iommu/amd: Fix wrong shift direction iommu/omap: always provide iommu debug code iommu/core: let drivers know if an iommu fault handler isn't installed iommu/core: export iommu_set_fault_handler() iommu/omap: Fix build error with !IOMMU_SUPPORT iommu/omap: Migrate to the generic fault report mechanism iommu/core: Add fault reporting mechanism iommu/core: Use PAGE_SIZE instead of hard-coded value iommu/core: use the existing IS_ALIGNED macro iommu/msm: ->unmap() should return order of unmapped page ... Fixup trivial conflicts in drivers/iommu/Makefile: "move omap iommu to dedicated iommu folder" vs "Rename the DMAR and INTR_REMAP config options" just happened to touch lines next to each other.
| * omap: iommu/iovmm: move to dedicated iommu folderOhad Ben-Cohen2011-08-261-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move OMAP's iommu drivers to the dedicated iommu drivers folder. While OMAP's iovmm (virtual memory manager) driver does not strictly belong to the iommu drivers folder, move it there as well, because it's by no means OMAP-specific (in concept. technically it is still coupled with OMAP's iommu). Eventually, iovmm will be completely replaced with the generic, iommu-based, dma-mapping API. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
* | iommu: Rename the DMAR and INTR_REMAP config optionsSuresh Siddha2011-09-211-2/+3
|/ | | | | | | | | | | | | | | | | | | | Change the CONFIG_DMAR to CONFIG_INTEL_IOMMU to be consistent with the other IOMMU options. Rename the CONFIG_INTR_REMAP to CONFIG_IRQ_REMAP to match the irq subsystem name. And define the CONFIG_DMAR_TABLE for the common ACPI DMAR routines shared by both CONFIG_INTEL_IOMMU and CONFIG_IRQ_REMAP. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: yinghai@kernel.org Cc: youquan.song@intel.com Cc: joerg.roedel@amd.com Cc: tony.luck@intel.com Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/20110824001456.558630224@sbsiddha-desk.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
* iommu/amd: Move missing parts to drivers/iommuJoerg Roedel2011-06-211-1/+1
| | | | | | | | A few parts of the driver were missing in drivers/iommu. Move them there to have the complete driver in that directory. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
* x86/ia64: intel-iommu: move to drivers/iommu/Ohad Ben-Cohen2011-06-211-0/+2
| | | | | | | | | | | | | | | | | This should ease finding similarities with different platforms, with the intention of solving problems once in a generic framework which everyone can use. Note: to move intel-iommu.c, the declaration of pci_find_upstream_pcie_bridge() has to move from drivers/pci/pci.h to include/linux/pci.h. This is handled in this patch, too. As suggested, also drop DMAR's EXPERIMENTAL tag while we're at it. Compile-tested on x86_64. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 09:12:16 +0000