summaryrefslogtreecommitdiffstats
path: root/drivers/iommu/irq_remapping.c
Commit message (Collapse)AuthorAgeFilesLines
* treewide: Add SPDX license identifier for missed filesThomas Gleixner2019-05-211-0/+1
| | | | | | | | | | | | | | | | | Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iommu/hyper-v: Add Hyper-V stub IOMMU driverLan Tianyu2019-02-281-0/+3
| | | | | | | | | | | | | | | | | | | | | | | On the bare metal, enabling X2APIC mode requires interrupt remapping function which helps to deliver irq to cpu with 32-bit APIC ID. Hyper-V doesn't provide interrupt remapping function so far and Hyper-V MSI protocol already supports to deliver interrupt to the CPU whose virtual processor index is more than 255. IO-APIC interrupt still has 8-bit APIC ID limitation. This patch is to add Hyper-V stub IOMMU driver in order to enable X2APIC mode successfully in Hyper-V Linux guest. The driver returns X2APIC interrupt remapping capability when X2APIC mode is available. Otherwise, it creates a Hyper-V irq domain to limit IO-APIC interrupts' affinity and make sure cpus assigned with IO-APIC interrupt have 8-bit APIC ID. Define 24 IO-APIC remapping entries because Hyper-V only expose one single IO-APIC and one IO-APIC has 24 pins according IO-APIC spec( https://pdos.csail.mit.edu/6.828/2016/readings/ia32/ioapic.pdf). Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* irq_remapping: Remove unused header filesYangtao Li2018-12-031-1/+0
| | | | | | | seq_file.h does not need to be included,so remove it. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* irq_remapping: Use apic_ack_irq()Thomas Gleixner2018-06-061-5/+0
| | | | | | | | | | | | | | | | | | | | | | | To address the EBUSY fail of interrupt affinity settings in case that the previous setting has not been cleaned up yet, use the new apic_ack_irq() function instead of the special ir_ack_apic_edge() implementation which is merily a wrapper around ack_APIC_irq(). Preparatory change for the real fix Fixes: dccfe3147b42 ("x86/vector: Simplify vector move cleanup") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Song Liu <songliubraving@fb.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <liu.song.a23@gmail.com> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: stable@vger.kernel.org Cc: Mike Travis <mike.travis@hpe.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Tariq Toukan <tariqt@mellanox.com> Link: https://lkml.kernel.org/r/20180604162224.555716895@linutronix.de
* x86/apic: Rename variables and functions related to x86_io_apic_opsBaoquan He2018-02-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | The names of x86_io_apic_ops and its two member variables are misleading: The ->read() member is to read IO_APIC reg, while ->disable() which is called by native_disable_io_apic()/irq_remapping_disable_io_apic() is actually used to restore boot IRQ mode, not to disable the IO-APIC. So rename x86_io_apic_ops to 'x86_apic_ops' since it doesn't only handle the IO-APIC, but also the local APIC. Also rename its member variables and the related callbacks. Signed-off-by: Baoquan He <bhe@redhat.com> Reviewed-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: douly.fnst@cn.fujitsu.com Cc: joro@8bytes.org Cc: prarit@redhat.com Cc: uobergfe@redhat.com Link: http://lkml.kernel.org/r/20180214054656.3780-6-bhe@redhat.com [ Rewrote the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
* x86/cpufeature: Replace cpu_has_apic with boot_cpu_has() usageBorislav Petkov2016-04-131-1/+1
| | | | | | | | | | | | | | | | | Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: iommu@lists.linux-foundation.org Cc: linux-pm@vger.kernel.org Cc: oprofile-list@lists.sf.net Link: http://lkml.kernel.org/r/1459801503-15600-8-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
* iommu/vt-d: Add a command line parameter for VT-d posted-interruptsFeng Wu2015-10-011-4/+8
| | | | | | | | | | | Enable VT-d Posted-Interrtups and add a command line parameter for it. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* iommu/vt-d: Return false instead of 0 in irq_remapping_cap()Joerg Roedel2015-08-131-1/+1
| | | | | | | The function return type is bool, so return false instead of 0. Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu, x86: Provide irq_remapping_cap() interfaceFeng Wu2015-06-121-0/+9
| | | | | | | | | | | | | | | | | Add a new interface irq_remapping_cap() to detect whether irq remapping supports new features, such as VT-d Posted-Interrupts. Export the function, so that KVM code can check this and use this mechanism properly. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Jiang Liu <jiang.liu@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Joerg Roedel <joro@8bytes.org> Cc: iommu@lists.linux-foundation.org Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/1433827237-3382-10-git-send-email-feng.wu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* iommu, x86: Setup Posted-Interrupts capability for Intel iommuFeng Wu2015-06-121-0/+2
| | | | | | | | | | | | | | Set Posted-Interrupts capability for Intel iommu when Interrupt Remapping is enabled, clear it when disabled. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Joerg Roedel <joro@8bytes.org> Cc: jiang.liu@linux.intel.com Cc: iommu@lists.linux-foundation.org Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/1433827237-3382-9-git-send-email-feng.wu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* irq_remapping: Clean up unsued code to support IOAPICJiang Liu2015-04-241-33/+0
| | | | | | | | | | | | | | | | | | | | | | | | Now we have converted to hierarchical irqdomains, so clean up unused code. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Tested-by: Joerg Roedel <jroedel@suse.de> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Cohen <david.a.cohen@linux.intel.com> Cc: Sander Eikelenboom <linux@eikelenboom.it> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: iommu@lists.linux-foundation.org Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dimitri Sivanich <sivanich@sgi.com> Cc: Joerg Roedel <joro@8bytes.org> Link: http://lkml.kernel.org/r/1428978610-28986-10-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86/irq: Remove x86_io_apic_ops.eoi_ioapic_pin and related interfacesJiang Liu2015-04-241-19/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | Now there is no user of x86_io_apic_ops.eoi_ioapic_pin anymore, so remove it. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Tested-by: Joerg Roedel <jroedel@suse.de> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Cohen <david.a.cohen@linux.intel.com> Cc: Sander Eikelenboom <linux@eikelenboom.it> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: iommu@lists.linux-foundation.org Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dimitri Sivanich <sivanich@sgi.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Grant Likely <grant.likely@linaro.org> Link: http://lkml.kernel.org/r/1428978610-28986-7-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86/irq: Remove x86_io_apic_ops.set_affinity and related interfacesJiang Liu2015-04-241-15/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Now there is no user of x86_io_apic_ops.set_affinity anymore, so remove it. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Tested-by: Joerg Roedel <jroedel@suse.de> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Cohen <david.a.cohen@linux.intel.com> Cc: Sander Eikelenboom <linux@eikelenboom.it> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: iommu@lists.linux-foundation.org Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dimitri Sivanich <sivanich@sgi.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Grant Likely <grant.likely@linaro.org> Link: http://lkml.kernel.org/r/1428978610-28986-6-git-send-email-jiang.liu@linux.intel.com
* x86/irq: Remove x86_io_apic_ops.setup_entry and related interfacesJiang Liu2015-04-241-13/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Now there is no user of x86_io_apic_ops.setup_entry anymore, so remove it. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Tested-by: Joerg Roedel <jroedel@suse.de> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Cohen <david.a.cohen@linux.intel.com> Cc: Sander Eikelenboom <linux@eikelenboom.it> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: iommu@lists.linux-foundation.org Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dimitri Sivanich <sivanich@sgi.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Grant Likely <grant.likely@linaro.org> Link: http://lkml.kernel.org/r/1428978610-28986-5-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* irq_remapping: Remove unused function irq_remapping_print_chip()Jiang Liu2015-04-241-13/+0
| | | | | | | | | | | | | | | | | | | | | | | | Now there's no user of irq_remapping_print_chip() anymore, so remove it. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Cohen <david.a.cohen@linux.intel.com> Cc: Sander Eikelenboom <linux@eikelenboom.it> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Joerg Roedel <jroedel@suse.de> Cc: iommu@lists.linux-foundation.org Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dimitri Sivanich <sivanich@sgi.com> Cc: Joerg Roedel <joro@8bytes.org> Link: http://lkml.kernel.org/r/1428905519-23704-29-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* irq_remapping: Clean up unused MSI related codeJiang Liu2015-04-241-151/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | Now MSI interrupt has been converted to new hierarchical irqdomain interfaces, so remove legacy MSI related code and interfaces. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Cohen <david.a.cohen@linux.intel.com> Cc: Sander Eikelenboom <linux@eikelenboom.it> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: iommu@lists.linux-foundation.org Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dimitri Sivanich <sivanich@sgi.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Yijing Wang <wangyijing@huawei.com> Link: http://lkml.kernel.org/r/1428905519-23704-18-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86/MSI: Use hierarchical irqdomains to manage MSI interruptsJiang Liu2015-04-241-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | Enhance MSI code to support hierarchical irqdomains, it helps to make the architecture more clear. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Cohen <david.a.cohen@linux.intel.com> Cc: Sander Eikelenboom <linux@eikelenboom.it> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: iommu@lists.linux-foundation.org Cc: Joerg Roedel <jroedel@suse.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dimitri Sivanich <sivanich@sgi.com> Cc: Joerg Roedel <joro@8bytes.org> Link: http://lkml.kernel.org/r/1428905519-23704-14-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* irq_remapping: Introduce new interfaces to support hierarchical irqdomainsJiang Liu2015-04-241-1/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce new interfaces for interrupt remapping drivers to support hierarchical irqdomains: 1) irq_remapping_get_ir_irq_domain(): get irqdomain associated with an interrupt remapping unit. IOAPIC/HPET drivers use this interface to get parent interrupt remapping irqdomain. 2) irq_remapping_get_irq_domain(): get irqdomain for an IRQ allocation. This is mainly used to support MSI irqdomain. We must build one MSI irqdomain for each interrupt remapping unit. MSI driver calls this interface to get MSI irqdomain associated with an IR irqdomain which manages the PCI devices. In a further step we will store the irqdomain pointer in the device struct to avoid this call in the irq allocation path. Architecture specific hooks: 1) arch_get_ir_parent_domain(): get parent irqdomain for IR irqdomain, which is x86_vector_domain on x86 platforms. 2) arch_create_msi_irq_domain(): create an MSI irqdomain associated with the interrupt remapping unit. We also add following callbacks into struct irq_remap_ops: struct irq_domain *(*get_ir_irq_domain)(struct irq_alloc_info *); struct irq_domain *(*get_irq_domain)(struct irq_alloc_info *); Once all clients of IR have been converted to the new hierarchical irqdomain interfaces, we will: 1) Remove set_ioapic_entry, set_affinity, free_irq, compose_msi_msg, msi_alloc_irq, msi_setup_irq, setup_hpet_msi from struct remap_osp 2) Remove setup_ioapic_remapped_entry, free_remapped_irq, compose_remapped_msi_msg, setup_hpet_msi_remapped, setup_remapped_irq. 3) Simplify x86_io_apic_ops and x86_msi. We can achieve a way clearer architecture with all these changes applied. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Acked-by: Joerg Roedel <jroedel@suse.de> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Cohen <david.a.cohen@linux.intel.com> Cc: Sander Eikelenboom <linux@eikelenboom.it> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: iommu@lists.linux-foundation.org Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dimitri Sivanich <sivanich@sgi.com> Cc: Joerg Roedel <joro@8bytes.org> Link: http://lkml.kernel.org/r/1428905519-23704-9-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86/dmar: Use new irqdomain interfaces to allocate/free IRQJiang Liu2015-04-241-2/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use new irqdomain interfaces to allocate/free IRQ for DMAR and interrupt remapping, so we can remove GENERIC_IRQ_LEGACY_ALLOC_HWIRQ later. The private definitions of irq_alloc_hwirqs()/irq_free_hwirqs() are a temporary solution, they will be removed once we have converted the interrupt remapping driver to use irqdomain framework. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Cohen <david.a.cohen@linux.intel.com> Cc: Sander Eikelenboom <linux@eikelenboom.it> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: iommu@lists.linux-foundation.org Cc: Joerg Roedel <jroedel@suse.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dimitri Sivanich <sivanich@sgi.com> Cc: Joerg Roedel <joro@8bytes.org> Link: http://lkml.kernel.org/r/1428905519-23704-8-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* iommu/irq_remapping: Normailize the way to detect whether IR is enabledJiang Liu2015-01-151-24/+14
| | | | | | | | | | | | | | Refine code by normailizing the way to detect whether IR is enabled. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Tested-by: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: iommu@lists.linux-foundation.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/1420615903-28253-17-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* iommu/irq_remapping: Change variable disable_irq_remap to be staticJiang Liu2015-01-151-2/+1
| | | | | | | | | | | | | | Change variable disable_irq_remap to be static and simplify the code. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Tested-by: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: iommu@lists.linux-foundation.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/1420615903-28253-16-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* iommu/irq_remapping: Refine function irq_remapping_prepare() for maintenanceJiang Liu2015-01-151-8/+8
| | | | | | | | | | | | | | | Assign intel_irq_remap_ops to remap_ops only if intel_irq_remap_ops.prepare() succeeds. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Tested-by: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: iommu@lists.linux-foundation.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/1420615903-28253-15-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* iommu/irq_remapping: Kill function irq_remapping_supported() and related codeJiang Liu2015-01-151-10/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Simplify irq_remapping code by killing irq_remapping_supported() and related interfaces. Joerg posted a similar patch at https://lkml.org/lkml/2014/12/15/490, so assume an signed-off from Joerg. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: iommu@lists.linux-foundation.org Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: David Rientjes <rientjes@google.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Oren Twaig <oren@scalemp.com> Link: http://lkml.kernel.org/r/1420615903-28253-14-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* iommu, x86: Restructure setup of the irq remapping featureThomas Gleixner2015-01-151-12/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | enable_IR_x2apic() calls setup_irq_remapping_ops() which by default installs the intel dmar remapping ops and then calls the amd iommu irq remapping prepare callback to figure out whether we are running on an AMD machine with irq remapping hardware. Right after that it calls irq_remapping_prepare() which pointlessly checks: if (!remap_ops || !remap_ops->prepare) return -ENODEV; and then calls remap_ops->prepare() which is silly in the AMD case as it got called from setup_irq_remapping_ops() already a few microseconds ago. Simplify this and just collapse everything into irq_remapping_prepare(). The irq_remapping_prepare() remains still silly as it assigns blindly the intel ops, but that's not scope of this patch. The scope here is to move the preperatory work, i.e. memory allocations out of the atomic section which is required to enable irq remapping. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@alien8.de> Acked-and-tested-by: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: iommu@lists.linux-foundation.org Cc: Joerg Roedel <jroedel@suse.de> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Oren Twaig <oren@scalemp.com> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/20141205084147.232633738@linutronix.de Link: http://lkml.kernel.org/r/1420615903-28253-2-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86: irq_remapping: Use helpers to access irq_cfg data structure associated ↵Jiang Liu2014-12-161-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | with IRQ Use helpers to access irq_cfg data structure associated with IRQ, instead of accessing irq_data->chip_data directly. Later we can rewrite those helpers to support hierarchy irqdomain. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: iommu@lists.linux-foundation.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Joerg Roedel <joro@8bytes.org> Link: http://lkml.kernel.org/r/1414397531-28254-18-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* PCI/MSI: Simplify PCI MSI code by initializing msi_desc.nvec_used earlierJiang Liu2014-11-231-8/+0
| | | | | | | | | | | | | | | | | Simplify PCI MSI code by initializing msi_desc.nvec_used and msi_desc.msi_attrib.multiple when creating MSI descriptors. Also remove redundant checks in IRQ remapping drivers, PCI MSI core already guarantees these. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* iommu/irq_remapping: Fix the regression of hpet irq remappingYijing Wang2014-09-251-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 71054d8841b4 ("x86, hpet: Introduce x86_msi_ops.setup_hpet_msi") introduced x86_msi_ops.setup_hpet_msi to setup hpet MSI irq when irq remapping enabled. This caused a regression of hpet MSI irq remapping. Original code flow before commit 71054d8841b4: hpet_setup_msi_irq() arch_setup_hpet_msi() setup_hpet_msi_remapped() remap_ops->setup_hpet_msi() alloc_irte() msi_compose_msg() hpet_msi_write() ... Current code flow after commit 71054d8841b4: hpet_setup_msi_irq() x86_msi.setup_hpet_msi() setup_hpet_msi_remapped() intel_setup_hpet_msi() alloc_irte() Currently, we only call alloc_irte() for hpet MSI, but do not composed and wrote its msg... Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* x86: irq_remapping: Use irq_alloc/free_hwirq()Thomas Gleixner2014-05-161-7/+5
| | | | | | | | | | | | | | | | | | | The create_irq variants are going away. Use the new interface. The core and arch code already excludes the gsi interrupts from the allocation, so no functional change. This does not replace the requirement to move x86 to irq domains, but it limits the mess to some degree. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Grant Likely <grant.likely@linaro.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Acked-by: Joerg Roedel <joro@8bytes.org> Cc: x86@kernel.org Cc: iommu@lists.linux-foundation.org Link: http://lkml.kernel.org/r/20140507154334.741805075@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* iommu/vt-d, trivial: clean sparse warningsJiang Liu2014-01-091-2/+2
| | | | | | | | Clean up most sparse warnings in Intel DMA and interrupt remapping drivers. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
* iommu/vt-d: Mark function eoi_ioapic_pin_remapped() as static in irq_remapping.cRashika Kheria2013-12-301-1/+1
| | | | | | | | | | | | | Mark function eoi_ioapic_pin_remapped() as static in irq_remapping.c because it is not used outside this file. This eliminates the following warning in irq_remapping.c:drivers/iommu/irq_remapping.c:153:6: warning: no previous prototype for ‘eoi_ioapic_pin_remapped’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Joerg Roedel <joro@8bytes.org>
* x86/MSI: Conserve interrupt resources when using multiple-MSIsAlexander Gordeev2013-06-031-5/+7
| | | | | | | | | | | | | | | | | | | | | Current multiple-MSI implementation does not take into account actual number of requested MSIs and always rounds that number to a larger power-of-two value. Yet, the number of MSIs a PCI device could send (and therefore the number of messages a device driver could request) may be smaller. As result, resources allocated for extra MSIs are just wasted. This update takes advantage of 'msi_desc::nvec_used' field introduced with generic MSI code to track the number of requested and used MSIs. As result, resources associated with interrupts are conserved. Of those resources most noticeable are x86 interrupt vectors. The initial version of this fix also conserved IRTEs, but Jan noticed that a malfunctioning PCI device might send a message number it did not claim and thus refer to an IRTE it does not own. To avoid this security hole, as many IRTEs are reserved as the device could possibly send. [bhelgaas: changelog, rename to "nvec_used"] Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* Merge branches 'iommu/fixes', 'x86/vt-d', 'x86/amd', 'ppc/pamu', 'core' and ↵Joerg Roedel2013-05-021-1/+0
|\ | | | | | | 'arm/tegra' into next
| * x86, io_apic: remove duplicated include from irq_remapping.cWei Yongjun2013-03-261-1/+0
| | | | | | | | | | | | | | Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Joerg Roedel <joro@8bytes.org>
* | iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsetsNeil Horman2013-04-181-0/+6
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A few years back intel published a spec update: http://www.intel.com/content/dam/doc/specification-update/5520-and-5500-chipset-ioh-specification-update.pdf For the 5520 and 5500 chipsets which contained an errata (specificially errata 53), which noted that these chipsets can't properly do interrupt remapping, and as a result the recommend that interrupt remapping be disabled in bios. While many vendors have a bios update to do exactly that, not all do, and of course not all users update their bios to a level that corrects the problem. As a result, occasionally interrupts can arrive at a cpu even after affinity for that interrupt has be moved, leading to lost or spurrious interrupts (usually characterized by the message: kernel: do_IRQ: 7.71 No irq handler for vector (irq -1) There have been several incidents recently of people seeing this error, and investigation has shown that they have system for which their BIOS level is such that this feature was not properly turned off. As such, it would be good to give them a reminder that their systems are vulnurable to this problem. For details of those that reported the problem, please see: https://bugzilla.redhat.com/show_bug.cgi?id=887006 [ Joerg: Removed CONFIG_IRQ_REMAP ifdef from early-quirks.c ] Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Prarit Bhargava <prarit@redhat.com> CC: Don Zickus <dzickus@redhat.com> CC: Don Dutile <ddutile@redhat.com> CC: Bjorn Helgaas <bhelgaas@google.com> CC: Asit Mallick <asit.k.mallick@intel.com> CC: David Woodhouse <dwmw2@infradead.org> CC: linux-pci@vger.kernel.org CC: Joerg Roedel <joro@8bytes.org> CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: Arkadiusz Miśkiewicz <arekm@maven.pl> Signed-off-by: Joerg Roedel <joro@8bytes.org>
* x86, irq: Move irq_remapped out of x86 core codeJoerg Roedel2013-01-281-0/+5
| | | | | | | | | The irq_remapped function is only used in IOMMU code after the last patch. So move its definition there too. Signed-off-by: Joerg Roedel <joro@8bytes.org> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* x86, io_apic: Introduce eoi_ioapic_pin call-backJoerg Roedel2013-01-281-0/+12
| | | | | | | | | This callback replaces the old __eoi_ioapic_pin function which needs a special path for interrupt remapping. Signed-off-by: Joerg Roedel <joro@8bytes.org> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* x86, msi: Introduce x86_msi.compose_msi_msg call-backJoerg Roedel2013-01-281-3/+6
| | | | | | | | | | | | | | This call-back points to the right function for initializing the msi_msg structure. The old code for msi_msg generation was split up into the irq-remapped and the default case. The irq-remapped case just calls into the specific Intel or AMD implementation when the device is behind an IOMMU. Otherwise the default function is called. Signed-off-by: Joerg Roedel <joro@8bytes.org> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* x86, irq: Introduce setup_remapped_irq()Joerg Roedel2013-01-281-0/+9
| | | | | | | | | This function does irq-remapping specific interrupt setup like modifying the chip defaults. Signed-off-by: Joerg Roedel <joro@8bytes.org> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* x86, irq: Move irq_remapped() check into free_remapped_irqJoerg Roedel2013-01-281-1/+4
| | | | | | | | | The function is called unconditionally now in IO-APIC code removing another irq_remapped() check from x86 core code. Signed-off-by: Joerg Roedel <joro@8bytes.org> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* x86, io-apic: Move CONFIG_IRQ_REMAP code out of x86 coreJoerg Roedel2013-01-281-0/+25
| | | | | | | | | Move all the code to either to the header file asm/irq_remapping.h or to drivers/iommu/. Signed-off-by: Joerg Roedel <joro@8bytes.org> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* x86, io_apic: Move irq_remapping_enabled checks out of check_timer()Joerg Roedel2013-01-281-0/+6
| | | | | | | | | Move these checks to IRQ remapping code by introducing the panic_on_irq_remap() function. Signed-off-by: Joerg Roedel <joro@8bytes.org> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* x86, io_apic: Convert setup_ioapic_entry to function pointerJoerg Roedel2013-01-281-0/+1
| | | | | | | | | This pointer is changed to a different function when IRQ remapping is enabled. Signed-off-by: Joerg Roedel <joro@8bytes.org> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* x86, io_apic: Introduce set_affinity function pointerJoerg Roedel2013-01-281-0/+4
| | | | | | | | | | With interrupt remapping a special function is used to change the affinity of an IO-APIC interrupt. Abstract this with a function pointer. Signed-off-by: Joerg Roedel <joro@8bytes.org> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* x86, msi: Use IRQ remapping specific setup_msi_irqs routineJoerg Roedel2013-01-281-3/+109
| | | | | | | | | Use seperate routines to setup MSI IRQs for both irq_remapping_enabled cases. Signed-off-by: Joerg Roedel <joro@8bytes.org> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* x86, hpet: Introduce x86_msi_ops.setup_hpet_msiJoerg Roedel2013-01-281-1/+2
| | | | | | | | | | This function pointer can be overwritten by the IRQ remapping code. The irq_remapping_enabled check can be removed from default_setup_hpet_msi. Signed-off-by: Joerg Roedel <joro@8bytes.org> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* x86, io_apic: Introduce x86_io_apic_ops.disable()Joerg Roedel2013-01-281-1/+30
| | | | | | | | | | | | | | This function pointer is used to call a system-specific function for disabling the IO-APIC. Currently this is used for IRQ remapping which has its own disable routine. Also introduce the necessary infrastructure in the interrupt remapping code to overwrite this and other function pointers as necessary by interrupt remapping. Signed-off-by: Joerg Roedel <joro@8bytes.org> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* x86, apic: Move irq_remapping_enabled checks into IRQ-remapping codeJoerg Roedel2013-01-281-2/+9
| | | | | | | | | Move the three easy to move checks in the x86' apic.c file into the IRQ-remapping code. Signed-off-by: Joerg Roedel <joro@8bytes.org> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* iommu/irq: Use amd_iommu_irq_ops if supportedJoerg Roedel2012-09-281-0/+5
| | | | | | Finally enable interrupt remapping for AMD systems. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
* Merge tag 'iommu-updates-v3.6-rc1' of ↵Linus Torvalds2012-07-241-0/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: "The most important part of these updates is the IOMMU groups code enhancement written by Alex Williamson. It abstracts the problem that a given hardware IOMMU can't isolate any given device from any other device (e.g. 32 bit PCI devices can't usually be isolated). Devices that can't be isolated are grouped together. This code is required for the upcoming VFIO framework. Another IOMMU-API change written by me is the introduction of domain attributes. This makes it easier to handle GART-like IOMMUs with the IOMMU-API because now the start-address and the size of the domain address space can be queried. Besides that there are a few cleanups and fixes for the NVidia Tegra IOMMU drivers and the reworked init-code for the AMD IOMMU. The latter is from my patch-set to support interrupt remapping. The rest of this patch-set requires x86 changes which are not mergabe yet. So full support for interrupt remapping with AMD IOMMUs will come in a future merge window." * tag 'iommu-updates-v3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (33 commits) iommu/amd: Fix hotplug with iommu=pt iommu/amd: Add missing spin_lock initialization iommu/amd: Convert iommu initialization to state machine iommu/amd: Introduce amd_iommu_init_dma routine iommu/amd: Move unmap_flush message to amd_iommu_init_dma_ops() iommu/amd: Split enable_iommus() routine iommu/amd: Introduce early_amd_iommu_init routine iommu/amd: Move informational prinks out of iommu_enable iommu/amd: Split out PCI related parts of IOMMU initialization iommu/amd: Use acpi_get_table instead of acpi_table_parse iommu/amd: Fix sparse warnings iommu/tegra: Don't call alloc_pdir with as->lock iommu/tegra: smmu: Fix unsleepable memory allocation at alloc_pdir() iommu/tegra: smmu: Remove unnecessary sanity check at alloc_pdir() iommu/exynos: Implement DOMAIN_ATTR_GEOMETRY attribute iommu/tegra: Implement DOMAIN_ATTR_GEOMETRY attribute iommu/msm: Implement DOMAIN_ATTR_GEOMETRY attribute iommu/omap: Implement DOMAIN_ATTR_GEOMETRY attribute iommu/vt-d: Implement DOMAIN_ATTR_GEOMETRY attribute iommu/amd: Implement DOMAIN_ATTR_GEOMETRY attribute ...
| * iommu/amd: Fix sparse warningsJoerg Roedel2012-07-171-0/+5
| | | | | | | | | | | | | | | | A few sparse warnings fire in drivers/iommu/amd_iommu_init.c. Fix most of them with this patch. Also fix the sparse warnings in drivers/iommu/irq_remapping.c while at it. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 17:32:37 +0000