summaryrefslogtreecommitdiffstats
path: root/drivers/irqchip/irq-bcm7120-l2.c
Commit message (Collapse)AuthorAgeFilesLines
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner2019-06-191-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* irqchip/bcm: Restore registration print with %pOFFlorian Fainelli2019-04-291-0/+3
| | | | | | | | | | | | | | | It is useful to print which interrupt controllers are registered in the system and which parent IRQ they use, especially given that L2 interrupt controllers do not call request_irq() on their parent interrupt and do not appear under /proc/interrupts for that reason. We used to print the base register address virtual address which had little value, use %pOF to print the path to the Device Tree node which maps to the physical address more easily and is what people need to troubleshoot systems. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip/bcm: Remove hashed address printingJaedon Shin2018-02-161-3/+0
| | | | | | | | | | Since commit ad67b74d2469 ("printk: hash addresses printed with %p") pointers are being hashed when printed. Displaying the virtual memory at bootup time is not helpful. so delete the prints. Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* irqchip/irq-bcm7120-l2: Use correct I/O accessors for irq_fwd_maskFlorian Fainelli2017-08-311-6/+4
| | | | | | | | | | | Initialization of irq_fwd_mask was done using __raw_writel() which happens to work for all cases except when using ARM BE8 which requires writel() (with the proper swapping). Move the initialization of the irq_fwd_mask till later when we have correctly defined our I/O accessors. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* treewide: remove redundant #include <linux/kconfig.h>Masahiro Yamada2016-10-111-1/+0
| | | | | | | | | | | | | | | | | | | Kernel source files need not include <linux/kconfig.h> explicitly because the top Makefile forces to include it with: -include $(srctree)/include/linux/kconfig.h This commit removes explicit includes except the following: * arch/s390/include/asm/facilities_src.h * tools/testing/radix-tree/linux/kernel.h These two are used for host programs. Link: http://lkml.kernel.org/r/1473656164-11929-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* irqchip/bcm7120-l2: Make probe functions staticBen Dooks2016-06-131-5/+5
| | | | | | | | | | | | | The probe functions in this driver are not exported or declared for use elsewhere, so make them static to fix the warnings: drivers/irqchip/irq-bcm7120-l2.c:218:12: warning: symbol 'bcm7120_l2_intc_probe' was not declared. Should it be static? drivers/irqchip/irq-bcm7120-l2.c:342:12: warning: symbol 'bcm7120_l2_intc_probe_7120' was not declared. Should it be static? drivers/irqchip/irq-bcm7120-l2.c:349:12: warning: symbol 'bcm7120_l2_intc_probe_3380' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Link: https://lkml.kernel.org/r/1465408798-16201-1-git-send-email-ben.dooks@codethink.co.uk Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* genirq: Remove irq argument from irq flow handlersThomas Gleixner2015-09-161-1/+1
| | | | | | | | | | | | | | Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
* irqchip/bcm7120-l2: Fix interrupt status for multiple parent IRQsFlorian Fainelli2015-07-271-13/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Our irq-bcm7120-l2 interrupt controller driver utilizes the same handler function for the different parent interrupts it services: UPG_MAIN, UPG_BSC for instance. The problem is that function reads the IRQSTAT register which can combine interrupt causes for different parent interrupts, such that we can end-up in the following situation: - CPU takes an interrupt - bcm7120_l2_intc_irq_handle() reads IRQSTAT - generic_handle_irq() is invoked - there are still pending interrupts flagged in IRQSTAT from a different parent - handle_bad_irq() is invoked for these since they come from a different irq_desc/irq In order to fix this, make sure that we always mask IRQSTAT with the appropriate bits that correspond go the parent interrupt source this is coming from. To simplify things, associate an unique structure per parent interrupt handler to avoid multiplying the number of lookups. Fixes: a5042de2688d ("irqchip: bcm7120-l2: Add Broadcom BCM7120-style Level 2 interrupt controller") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Cc: jason@lakedaemon.net Cc: bcm-kernel-feedback-list@broadcom.com Cc: gregory.0xf0@gmail.com Cc: computersforpeace@gmail.com Link: http://lkml.kernel.org/r/1437691941-3100-1-git-send-email-f.fainelli@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* irqchip/bcm7120-l2: Perform suspend/resume even without installed child IRQsBrian Norris2015-07-271-8/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | Make use of the new irq_chip_generic suspend/resume callbacks. This is required because if there are no installed child IRQs for this chip, the irq_chip::irq_{suspend,resume} functions will not be called. However, we still need to save/restore the forwarding mask, to enable the top-level GIC interrupt; otherwise, we lose UART output after S3 resume. In addition to refactoring the callbacks, we have to self-initialize the mask cache, since the genirq core also doesn't initialize this until the first child IRQ is installed. The original problem report is described in extra detail here: http://lkml.kernel.org/g/20150619224123.GL4917@ld-irv-0074 Signed-off-by: Brian Norris <computersforpeace@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Gregory Fong <gregory.0xf0@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-mips@linux-mips.org Cc: Kevin Cernekee <cernekee@chromium.org> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1437607300-40858-2-git-send-email-computersforpeace@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* irqchip/bcm7120-l2: Consolidate chained IRQ handler install/removeThomas Gleixner2015-07-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Chained irq handlers usually set up handler data as well. We now have a function to set both under irq_desc->lock. Replace the two calls with one. Search and conversion was done with coccinelle: @@ expression E1, E2, E3; @@ ( -if (irq_set_handler_data(E1, E2) != 0) - BUG(); | -irq_set_handler_data(E1, E2); ) -irq_set_chained_handler(E1, E3); +irq_set_chained_handler_and_data(E1, E3, E2); @@ expression E1, E2, E3; @@ ( -if (irq_set_handler_data(E1, E2) != 0) - BUG(); ... | -irq_set_handler_data(E1, E2); ... ) -irq_set_chained_handler(E1, E3); +irq_set_chained_handler_and_data(E1, E3, E2); Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-mips@linux-mips.org
* irqchip: Prepare for local stub header removalJoel Porquet2015-07-111-2/+1
| | | | | | | | | | | | | | | | | The IRQCHIP_DECLARE macro moved to to 'include/linux/irqchip.h', so the local irqchip.h became an empty shell, which solely includes include/linux/irqchip.h Include the global header in all irqchip drivers instead of the local header, so we can remove it. Signed-off-by: Joel Porquet <joel@porquet.org> Cc: vgupta@synopsys.com Cc: monstr@monstr.eu Cc: ralf@linux-mips.org Cc: jason@lakedaemon.net Link: http://lkml.kernel.org/r/1882096.X39jVG8e0D@joel-zenbook Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* IRQCHIP: bcm7120-l2: Add support for BCM3380-style controllersKevin Cernekee2015-04-011-4/+51
| | | | | | | | | | | | | | | | | | | | | These controllers support multiple enable/status pairs (64+ IRQs), can put the enable/status words at different offsets, and do not support multiple parent IRQs. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8843/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* IRQCHIP: bcm7120-l2: Split STB-specific logic into its own functionKevin Cernekee2015-04-011-55/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BCM7xxx instances of this block (listed in the register manual as simply "IRQ0") all have the following items in common: - brcm,int-map-mask: for routing different bits in the L2 to different parent IRQs - brcm,int-fwd-mask: for hardwiring certain IRQs to bypass the L2 and use dedicated L1 lines - one enable/status pair (32 bits only) Much of the driver code can be shared with BCM3380-style controllers, but in order to do this cleanly, let's split out the BCM7xxx-specific logic first. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8842/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* IRQCHIP: bcm7120-l2: Refactor driver for arbitrary IRQEN/IRQSTAT offsetsKevin Cernekee2015-04-011-13/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the driver assumes that REG_BASE+0x00 is the IRQ enable mask, and REG_BASE+0x04 is the IRQ status mask. This is true on BCM3384 and BCM7xxx, but it is not true for some of the controllers found on BCM63xx chips. So we will change a couple of key assumptions: - Don't assume that both the IRQEN and IRQSTAT registers will be covered by a single ioremap() operation. - Don't assume any particular ordering (IRQSTAT might show up before IRQEN on some chips). - For an L2 controller with >=64 IRQs, don't assume that every IRQEN/IRQSTAT pair will use the same register spacing. This patch changes the "plumbing" but doesn't yet provide a way for users to instantiate a controller with arbitrary IRQEN/IRQSTAT offsets. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8841/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Merge branch 'irq-core-for-linus' of ↵Linus Torvalds2014-12-101-69/+105
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq core updates from Thomas Gleixner: "This is the first (boring) part of irq updates: - support for big endian I/O accessors in the generic irq chip - cleanup of brcmstb/bcm7120 drivers so they can be reused for non ARM SoCs - the usual pile of fixes and updates for the various ARM irq chips" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) irqchip: dw-apb-ictl: Add PM support irqchip: dw-apb-ictl: Enable IRQ_GC_MASK_CACHE_PER_TYPE irqchip: dw-apb-ictl: Always use use {readl|writel}_relaxed ARM: orion: convert the irq_reg_{readl,writel} calls to the new API irqchip: atmel-aic: Add missing entry for rm9200 irq fixups irqchip: atmel-aic: Rename at91sam9_aic_irq_fixup for naming consistency irqchip: atmel-aic: Add specific irq fixup function for sam9g45 and sam9rl irqchip: atmel-aic: Add irq fixups for at91sam926x SoCs irqchip: atmel-aic: Add irq fixup for RTT block irqchip: brcmstb-l2: Convert driver to use irq_reg_{readl,writel} irqchip: bcm7120-l2: Convert driver to use irq_reg_{readl,writel} irqchip: bcm7120-l2: Decouple driver from brcmstb-l2 irqchip: bcm7120-l2: Extend driver to support 64+ bit controllers irqchip: bcm7120-l2: Use gc->mask_cache to simplify suspend/resume functions irqchip: bcm7120-l2: Fix missing nibble in gc->unused mask irqchip: bcm7120-l2: Make sure all register accesses use base+offset irqchip: bcm7120-l2, brcmstb-l2: Remove ARM Kconfig dependency irqchip: bcm7120-l2: Eliminate bad IRQ check irqchip: brcmstb-l2: Eliminate dependency on ARM code genirq: Generic chip: Add big endian I/O accessors ...
| * irqchip: bcm7120-l2: Convert driver to use irq_reg_{readl,writel}Kevin Cernekee2014-11-091-10/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On BE MIPS systems this needs to use the new IRQ_GC_BE_IO gc_flag. In all other cases it will use the standard readl/writel accessors. The initial irq_fwd_mask setup runs before "gc" is initialized, so it is unchanged for now. This could potentially be a problem on an ARM system that boots in LE mode but runs a BE kernel, but currently none of the supported ARM platforms are ever expected to run BE. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lkml.kernel.org/r/1415342669-30640-14-git-send-email-cernekee@gmail.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| * irqchip: bcm7120-l2: Decouple driver from brcmstb-l2Kevin Cernekee2014-11-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Some chips, such as BCM6328, only require bcm7120-l2. Some BCM7xxx STB configurations only require brcmstb-l2. Treat them as two separate entities, and update the mach-bcm dependencies to reflect the change. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lkml.kernel.org/r/1415342669-30640-13-git-send-email-cernekee@gmail.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| * irqchip: bcm7120-l2: Extend driver to support 64+ bit controllersKevin Cernekee2014-11-091-49/+95
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most implementations of the bcm7120-l2 controller only have a single 32-bit enable word + 32-bit status word. But some instances have added more enable/status pairs in order to support 64+ IRQs (which are all ORed into one parent IRQ input). Make the following changes to allow the driver to support this: - Extend DT bindings so that multiple words can be specified for the reg property, various masks, etc. - Add loops to the probe/handle functions to deal with each word separately - Allocate 1 generic-chip for every 32 IRQs, so we can still use the clr/set helper functions - Update the documentation This uses one domain per bcm7120-l2 DT node. If the DT node defines multiple enable/status pairs (i.e. >=64 IRQs) then the driver will create a single IRQ domain with 2+ generic chips. Multiple generic chips are required because the generic-chip code can only handle one enable/status register pair per instance. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lkml.kernel.org/r/1415342669-30640-12-git-send-email-cernekee@gmail.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| * irqchip: bcm7120-l2: Use gc->mask_cache to simplify suspend/resume functionsKevin Cernekee2014-11-091-8/+3
| | | | | | | | | | | | | | | | | | | | | | The cached value already incorporates irq_fwd_mask, and was saved the last time an IRQ was enabled/disabled. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lkml.kernel.org/r/1415342669-30640-11-git-send-email-cernekee@gmail.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| * irqchip: bcm7120-l2: Fix missing nibble in gc->unused maskKevin Cernekee2014-11-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | This mask should have been 0xffff_ffff, not 0x0fff_ffff. The change should not have an effect on current users (STB) because bits 31:27 are unused. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lkml.kernel.org/r/1415342669-30640-10-git-send-email-cernekee@gmail.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| * irqchip: bcm7120-l2: Make sure all register accesses use base+offsetKevin Cernekee2014-11-091-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | A couple of accesses to IRQEN (base+0x00) just used "base" directly, so they would break if IRQEN ever became nonzero. Make sure that all reads/writes specify the register offset constant. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lkml.kernel.org/r/1415342669-30640-9-git-send-email-cernekee@gmail.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
| * irqchip: bcm7120-l2: Eliminate bad IRQ checkKevin Cernekee2014-11-091-11/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This check may be prone to race conditions, e.g. 1) Some external event (e.g. GPIO level) causes an IRQ to become pending 2) Peripheral asserts the L2 IRQ 3) CPU takes an interrupt 4) The event from #1 goes away 5) bcm7120_l2_intc_irq_handle() reads back a 0 status Unlike the hardware supported by brcmstb-l2, the bcm7120-l2 controller does not latch the IRQ status. Bits can change if the inputs to the controller change. Also, do_bad_IRQ() is an ARM-specific macro. So let's just nuke it. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lkml.kernel.org/r/1415342669-30640-7-git-send-email-cernekee@gmail.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | irqchip: bcm7120-l2: Fix error handling of irq_of_parse_and_mapDmitry Torokhov2014-11-261-2/+2
|/ | | | | | | | | | | Return value of irq_of_parse_and_map() is unsigned int, with 0 indicating failure, so testing for negative result never works. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Kevin Cernekee <cernekee@gmail.com> Link: https://lkml.kernel.org/r/20141114221614.GA37395@dtor-ws Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* irqchip: bcm7120-l2: Add Broadcom BCM7120-style Level 2 interrupt controllerFlorian Fainelli2014-09-141-0/+219
This patch adds support for the Level-2 interrupt controller hardware found in Broadcom Set Top Box System-on-a-Chip devices. This interrupt controller is implemented using a single enable register. This interrupt controller is always present on the platforms supported by the irq-brcmstb-l2 driver, hence the reason why both are compiled using the same Kconfig symbol. [jac] removed the following warning: drivers/irqchip/irq-bcm7120-l2.c: In function 'bcm7120_l2_intc_irq_handle': drivers/irqchip/irq-bcm7120-l2.c:49:27: warning: unused variable 'gc' [-Wunused-variable] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lkml.kernel.org/r/1410309862-27784-2-git-send-email-f.fainelli@gmail.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-30 22:38:43 +0000