summaryrefslogtreecommitdiffstats
path: root/drivers/irqchip
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'irqchip-fixes-5.6-2' of ↵Thomas Gleixner2020-03-151-1/+29
|\ | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Add workaround for Cavium/Marvell ThunderX unimplemented GIC registers
| * irqchip/gic-v3: Workaround Cavium erratum 38539 when reading GICD_TYPER2Marc Zyngier2020-03-141-1/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Despite the architecture spec requiring that reserved registers in the GIC distributor memory map are RES0 (and thus are not allowed to generate an exception), the Cavium ThunderX (aka TX1) SoC explodes as such: [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 128 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Internal error: synchronous external abort: 96000210 [#1] SMP [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc4-00035-g3cf6a3d5725f #7956 [ 0.000000] Hardware name: cavium,thunder-88xx (DT) [ 0.000000] pstate: 60000085 (nZCv daIf -PAN -UAO) [ 0.000000] pc : __raw_readl+0x0/0x8 [ 0.000000] lr : gic_init_bases+0x110/0x560 [ 0.000000] sp : ffff800011243d90 [ 0.000000] x29: ffff800011243d90 x28: 0000000000000000 [ 0.000000] x27: 0000000000000018 x26: 0000000000000002 [ 0.000000] x25: ffff8000116f0000 x24: ffff000fbe6a2c80 [ 0.000000] x23: 0000000000000000 x22: ffff010fdc322b68 [ 0.000000] x21: ffff800010a7a208 x20: 00000000009b0404 [ 0.000000] x19: ffff80001124dad0 x18: 0000000000000010 [ 0.000000] x17: 000000004d8d492b x16: 00000000f67eb9af [ 0.000000] x15: ffffffffffffffff x14: ffff800011249908 [ 0.000000] x13: ffff800091243ae7 x12: ffff800011243af4 [ 0.000000] x11: ffff80001126e000 x10: ffff800011243a70 [ 0.000000] x9 : 00000000ffffffd0 x8 : ffff80001069c828 [ 0.000000] x7 : 0000000000000059 x6 : ffff8000113fb4d1 [ 0.000000] x5 : 0000000000000001 x4 : 0000000000000000 [ 0.000000] x3 : 0000000000000000 x2 : 0000000000000000 [ 0.000000] x1 : 0000000000000000 x0 : ffff8000116f000c [ 0.000000] Call trace: [ 0.000000] __raw_readl+0x0/0x8 [ 0.000000] gic_of_init+0x188/0x224 [ 0.000000] of_irq_init+0x200/0x3cc [ 0.000000] irqchip_init+0x1c/0x40 [ 0.000000] init_IRQ+0x160/0x1d0 [ 0.000000] start_kernel+0x2ec/0x4b8 [ 0.000000] Code: a8c47bfd d65f03c0 d538d080 d65f03c0 (b9400000) when reading the GICv4.1 GICD_TYPER2 register, which is unexpected... Work around it by adding a new quirk for the following variants: ThunderX: CN88xx OCTEON TX: CN83xx, CN81xx OCTEON TX2: CN93xx, CN96xx, CN98xx, CNF95xx* and use this flag to avoid accessing GICD_TYPER2. Note that all reserved registers (including redistributors and ITS) are impacted by this erratum, but that only GICD_TYPER2 has to be worked around so far. Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Robert Richter <rrichter@marvell.com> Tested-by: Mark Salter <msalter@redhat.com> Tested-by: Tim Harvey <tharvey@gateworks.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Robert Richter <rrichter@marvell.com> Link: https://lore.kernel.org/r/20191027144234.8395-11-maz@kernel.org Link: https://lore.kernel.org/r/20200311115649.26060-1-maz@kernel.org
* | irqchip/gic-v4.1: Avoid 64bit division for the sake of 32bit ARMMarc Zyngier2020-02-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | In order to allow the GICv4 code to link properly on 32bit ARM, make sure we don't use 64bit divisions when it isn't strictly necessary. Fixes: 4e6437f12d6e ("irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD level") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge tag 'irqchip-fixes-5.6-1' of ↵Thomas Gleixner2020-02-083-24/+109
|\| | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes for 5.6, take #1 from Marc Zyngier: - Guarantee allocation of L2 vPE table for GICv4.1 - Fix GICv4.1 VPROPBASER programming - Numerous GICv4.1 tidy ups - Fix disabled GICv3 redistributor provisioning with ACPI - KConfig cleanup for C-SKY
| * irqchip/gic-v3-its: Rename VPENDBASER/VPROPBASER accessorsZenghui Yu2020-02-081-14/+14
| | | | | | | | | | | | | | | | | | | | | | V{PEND,PROP}BASER registers are actually located in VLPI_base frame of the *redistributor*. Rename their accessors to reflect this fact. No functional changes. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-7-yuzenghui@huawei.com
| * irqchip/gic-v3-its: Remove superfluous WARN_ONZenghui Yu2020-02-081-1/+0
| | | | | | | | | | | | | | | | | | "ITS virtual pending table not cleaning" is already complained inside its_clear_vpend_valid(), there's no need to trigger a WARN_ON again. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-6-yuzenghui@huawei.com
| * irqchip/gic-v4.1: Drop 'tmp' in inherit_vpe_l1_table_from_rd()Zenghui Yu2020-02-081-3/+1
| | | | | | | | | | | | | | | | | | The variable 'tmp' in inherit_vpe_l1_table_from_rd() is actually not needed, drop it. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-5-yuzenghui@huawei.com
| * irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD levelZenghui Yu2020-02-081-0/+80
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In GICv4, we will ensure that level2 vPE table memory is allocated for the specified vpe_id on all v4 ITS, in its_alloc_vpe_table(). This still works well for the typical GICv4.1 implementation, where the new vPE table is shared between the ITSs and the RDs. To make it explicit, let us introduce allocate_vpe_l2_table() to make sure that the L2 tables are allocated on all v4.1 RDs. We're likely not need to allocate memory in it because the vPE table is shared and (L2 table is) already allocated at ITS level, except for the case where the ITS doesn't share anything (say SVPET == 0, practically unlikely but architecturally allowed). The implementation of allocate_vpe_l2_table() is mostly copied from its_alloc_table_entry(). Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-4-yuzenghui@huawei.com
| * irqchip/gic-v4.1: Set vpe_l1_base for all redistributorsZenghui Yu2020-02-081-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, we will not set vpe_l1_page for the current RD if we can inherit the vPE configuration table from another RD (or ITS), which results in an inconsistency between RDs within the same CommonLPIAff group. Let's rename it to vpe_l1_base to indicate the base address of the vPE configuration table of this RD, and set it properly for *all* v4.1 redistributors. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-3-yuzenghui@huawei.com
| * irqchip/gic-v4.1: Fix programming of GICR_VPROPBASER_4_1_SIZEZenghui Yu2020-02-081-1/+1
| | | | | | | | | | | | | | | | | | | | The Size field of GICv4.1 VPROPBASER register indicates number of pages minus one and together Page_Size and Size control the vPEID width. Let's respect this requirement of the architecture. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-2-yuzenghui@huawei.com
| * irqchip/gic-v3-its: Reference to its_invall_cmd descriptor when building INVALLZenghui Yu2020-02-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | It looks like an obvious mistake to use its_mapc_cmd descriptor when building the INVALL command block. It so far worked by luck because both its_mapc_cmd.col and its_invall_cmd.col sit at the same offset of the ITS command descriptor, but we should not rely on it. Fixes: cc2d3216f53c ("irqchip: GICv3: ITS command queue") Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20191202071021.1251-1-yuzenghui@huawei.com
| * irqchip: Some Kconfig cleanup for C-SKYRandy Dunlap2020-01-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Fixes to Kconfig help text: - spell out "hardware" - fix verb usage Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/d44baeee-cceb-7c02-7249-e6b4817f0847@infradead.org
| * irqchip/gic-v3: Only provision redistributors that are enabled in ACPIMarc Zyngier2020-01-281-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We currently allocate redistributor region structures for individual redistributors when ACPI doesn't present us with compact MMIO regions covering multiple redistributors. It turns out that we allocate these structures even when the redistributor is flagged as disabled by ACPI. It works fine until someone actually tries to tarse one of these structures, and access the corresponding MMIO region. Instead, track the number of enabled redistributors, and only allocate what is required. This makes sure that there is no invalid data to misuse. Signed-off-by: Marc Zyngier <maz@kernel.org> Reported-by: Heyi Guo <guoheyi@huawei.com> Tested-by: Heyi Guo <guoheyi@huawei.com> Link: https://lore.kernel.org/r/20191216062745.63397-1-guoheyi@huawei.com
* | Merge tag 'irq-core-2020-01-28' of ↵Linus Torvalds2020-01-2710-95/+1377
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The interrupt departement provides: - A mechanism to shield isolated tasks from managed interrupts: The affinity of managed interrupts is completely controlled by the kernel and user space has no influence on them. The reason is that the automatically assigned affinity correlates to the multi-queue CPU handling of block devices. If the generated affinity mask spaws both housekeeping and isolated CPUs the interrupt could be routed to an isolated CPU which would then be disturbed by I/O submitted by a housekeeping CPU. The new mechamism ensures that as long as one housekeeping CPU is online in the assigned affinity mask the interrupt is routed to a housekeeping CPU. If there is no online housekeeping CPU in the affinity mask, then the interrupt is routed to an isolated CPU to keep the device queue intact, but unless the isolated CPU submits I/O by itself these interrupts are not raised. - A small addon to the device tree irqdomain core code to avoid duplication in irq chip drivers - Conversion of the SiFive PLIC to hierarchical domains - The usual pile of new irq chip drivers: SiFive GPIO, Aspeed SCI, NXP INTMUX, Meson A1 GPIO - The first cut of support for the new ARM GICv4.1 - The usual pile of fixes and improvements in core and driver code" * tag 'irq-core-2020-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) genirq, sched/isolation: Isolate from handling managed interrupts irqchip/gic-v4.1: Allow direct invalidation of VLPIs irqchip/gic-v4.1: Suppress per-VLPI doorbell irqchip/gic-v4.1: Add VPE INVALL callback irqchip/gic-v4.1: Add VPE eviction callback irqchip/gic-v4.1: Add VPE residency callback irqchip/gic-v4.1: Add mask/unmask doorbell callbacks irqchip/gic-v4.1: Plumb skeletal VPE irqchip irqchip/gic-v4.1: Implement the v4.1 flavour of VMOVP irqchip/gic-v4.1: Don't use the VPE proxy if RVPEID is set irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP irqchip/gic-v4.1: VPE table (aka GICR_VPROPBASER) allocation irqchip/gic-v3: Add GICv4.1 VPEID size discovery irqchip/gic-v3: Detect GICv4.1 supporting RVPEID irqchip/gic-v3-its: Fix get_vlpi_map() breakage with doorbells irqdomain: Fix a memory leak in irq_domain_push_irq() irqchip: Add NXP INTMUX interrupt multiplexer support dt-bindings: interrupt-controller: Add binding for NXP INTMUX interrupt multiplexer irqchip: Define EXYNOS_IRQ_COMBINER irqchip/meson-gpio: Add support for meson a1 SoCs ...
| * | Merge tag 'irqchip-5.6' of ↵Thomas Gleixner2020-01-2410-95/+1377
| |\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates from Marc Zyngier: - Conversion of the SiFive PLIC to hierarchical domains - New SiFive GPIO irqchip driver - New Aspeed SCI irqchip driver - New NXP INTMUX irqchip driver - Additional support for the Meson A1 GPIO irqchip - First part of the GICv4.1 support - Assorted fixes
| | * irqchip/gic-v4.1: Allow direct invalidation of VLPIsMarc Zyngier2020-01-221-19/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | Just like for INVALL, GICv4.1 has grown a VPE-aware INVLPI register. Let's plumb it in and make use of the DirectLPI code in that case. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20191224111055.11836-16-maz@kernel.org
| | * irqchip/gic-v4.1: Suppress per-VLPI doorbellMarc Zyngier2020-01-221-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since GICv4.1 gives us a per-VPE doorbell, avoid programming anything else on VMOVI/VMAPI/VMAPTI and on any other action that would have otherwise resulted in a per-VLPI doorbell to be programmed. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20191224111055.11836-15-maz@kernel.org
| | * irqchip/gic-v4.1: Add VPE INVALL callbackMarc Zyngier2020-01-221-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GICv4.1 redistributors have a VPE-aware INVALL register. Progress! We can now emulate a guest-requested INVALL without emiting a VINVALL command. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20191224111055.11836-14-maz@kernel.org
| | * irqchip/gic-v4.1: Add VPE eviction callbackMarc Zyngier2020-01-221-11/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When descheduling a VPE, special care must be taken to tell the GIC about whether we want to receive a doorbell or not. This is a major improvement on GICv4.0, where the doorbell had to be separately enabled/disabled. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20191224111055.11836-13-maz@kernel.org
| | * irqchip/gic-v4.1: Add VPE residency callbackMarc Zyngier2020-01-221-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Making a VPE resident on GICv4.1 is pretty simple, as it is just a single write to the local redistributor. We just need extra information about which groups to enable, which the KVM code will have to provide. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20191224111055.11836-12-maz@kernel.org
| | * irqchip/gic-v4.1: Add mask/unmask doorbell callbacksMarc Zyngier2020-01-221-0/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | masking/unmasking doorbells on GICv4.1 relies on a new INVDB command, which broadcasts the invalidation to all RDs. Implement the new command as well as the masking callbacks, and plug the whole thing into the v4.1 VPE irqchip. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20191224111055.11836-11-maz@kernel.org
| | * irqchip/gic-v4.1: Plumb skeletal VPE irqchipMarc Zyngier2020-01-221-1/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Just like for GICv4.0, each VPE has its own doorbell interrupt, and thus an irqchip that manages them. Since the doorbell management is quite different on GICv4.1, let's introduce an almost empty irqchip the will get populated over the next new patches. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20191224111055.11836-10-maz@kernel.org
| | * irqchip/gic-v4.1: Implement the v4.1 flavour of VMOVPMarc Zyngier2020-01-221-7/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With GICv4.1, VMOVP is extended to allow a default doorbell to be specified, as well as a validity bit for this doorbell. As an added bonus, VMOVP isn't required anymore of moving a VPE between redistributors that share the same affinity. Let's add this support to the VMOVP builder, and make sure we don't issue the command if we don't really need to. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20191224111055.11836-9-maz@kernel.org
| | * irqchip/gic-v4.1: Don't use the VPE proxy if RVPEID is setMarc Zyngier2020-01-221-1/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The infamous VPE proxy device isn't used with GICv4.1 because: - we can invalidate any LPI from the DirectLPI MMIO interface - the ITS and redistributors understand the life cycle of the doorbell, so we don't need to enable/disable it all the time So let's escape early from the proxy related functions. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20191224111055.11836-8-maz@kernel.org
| | * irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPPMarc Zyngier2020-01-221-5/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ITS VMAPP command gains some new fields with GICv4.1: - a default doorbell, which allows a single doorbell to be used for all the VLPIs routed to a given VPE - a pointer to the configuration table (instead of having it in a register that gets context switched) - a flag indicating whether this is the first map or the last unmap for this particular VPE - a flag indicating whether the pending table is known to be zeroed, or not Plumb in the new fields in the VMAPP builder, and add the map/unmap refcounting so that the ITS can do the right thing. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20191224111055.11836-7-maz@kernel.org
| | * irqchip/gic-v4.1: VPE table (aka GICR_VPROPBASER) allocationMarc Zyngier2020-01-221-3/+307
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GICv4.1 defines a new VPE table that is potentially shared between both the ITSs and the redistributors, following complicated affinity rules. To make things more confusing, the programming of this table at the redistributor level is reusing the GICv4.0 GICR_VPROPBASER register for something completely different. The code flow is somewhat complexified by the need to respect the affinities required by the HW, meaning that tables can either be inherited from a previously discovered ITS or redistributor. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20191224111055.11836-6-maz@kernel.org
| | * irqchip/gic-v3: Add GICv4.1 VPEID size discoveryMarc Zyngier2020-01-222-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While GICv4.0 mandates 16 bit worth of VPEIDs, GICv4.1 allows smaller implementations to be built. Add the required glue to dynamically compute the limit. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20191224111055.11836-3-maz@kernel.org
| | * irqchip/gic-v3: Detect GICv4.1 supporting RVPEIDMarc Zyngier2020-01-221-3/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GICv4.1 supports the RVPEID ("Residency per vPE ID"), which allows for a much efficient way of making virtual CPUs resident (to allow direct injection of interrupts). The functionnality needs to be discovered on each and every redistributor in the system, and disabled if the settings are inconsistent. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20191224111055.11836-2-maz@kernel.org
| | * irqchip/gic-v3-its: Fix get_vlpi_map() breakage with doorbellsMarc Zyngier2020-01-221-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When updating an LPI configuration, get_vlpi_map() may be passed a irq_data structure relative to an ITS domain (the normal case) or one that is relative to the core GICv3 domain in the case of a GICv4 doorbell. In the latter case, special care must be take not to dereference the irq_chip data as an its_dev structure, as that isn't what is stored there. Instead, check *first* whether the IRQ is forwarded to a vcpu, and only then try to obtain the vlpi mapping. Fixes: c1d4d5cd203c ("irqchip/gic-v3-its: Add its_vlpi_map helpers") Signed-off-by: Marc Zyngier <maz@kernel.org> Reported-by: Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20200122085609.658-1-yuzenghui@huawei.com
| | * irqchip: Add NXP INTMUX interrupt multiplexer supportJoakim Zhang2020-01-203-0/+316
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Interrupt Multiplexer (INTMUX) expands the number of peripherals that can interrupt the core: * The INTMUX has 8 channels that are assigned to 8 NVIC interrupt slots. * Each INTMUX channel can receive up to 32 interrupt sources and has 1 interrupt output. * The INTMUX routes the interrupt sources to the interrupt outputs. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200117060653.27485-3-qiangqing.zhang@nxp.com
| | * irqchip: Define EXYNOS_IRQ_COMBINERHyunki Koo2020-01-202-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is written to clean up dependency of ARCH_EXYNOS Not all exynos device have IRQ_COMBINER, especially aarch64 EXYNOS but it is built for all exynos devices. Thus add the config for EXYNOS_IRQ_COMBINER remove direct dependency between ARCH_EXYNOS and exynos-combiner.c and only selected on the aarch32 devices Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20191224211108.7128-1-hyunki00.koo@gmail.com
| | * irqchip/meson-gpio: Add support for meson a1 SoCsQianggui Song2020-01-201-0/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The meson a1 Socs have some changes compared with previous chips. For A113L, it contains 62 pins and can be spied on: - 62:128 undefined - 61:50 12 pins on bank A - 49:37 13 pins on bank F - 36:20 17 pins on bank X - 19:13 7 pins on bank B - 12:0 13 pins on bank P There are five relative registers for gpio interrupt controller, details are as below: - PADCTRL_GPIO_IRQ_CTRL0 bit[31]: enable/disable the whole irq lines bit[16-23]: both edge trigger bit[8-15]: single edge trigger bit[0-7]: pol trigger - PADCTRL_GPIO_IRQ_CTRL[X] bit[0-6]: 7 bits to choose gpio source for irq line 2*[X] - 2 bit[16-22]: 7 bits to choose gpio source for irq line 2*[X] - 1 where X =1,2,3,4 Signed-off-by: Qianggui Song <qianggui.song@amlogic.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20191216123645.10099-4-qianggui.song@amlogic.com
| | * irqchip/meson-gpio: Rework meson irqchip driver to support meson-A1 SoCsQianggui Song2020-01-201-25/+70
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since Meson-A1 SoCs register layout of gpio interrupt controller has difference with previous chips, registers to decide irq line and offset of trigger method are all changed, the current driver should be modified. Signed-off-by: Qianggui Song <qianggui.song@amlogic.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20191216123645.10099-3-qianggui.song@amlogic.com
| | * irqchip/mbigen: Set driver .suppress_bind_attrs to avoid remove problemsJohn Garry2020-01-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following crash can be seen for setting CONFIG_DEBUG_TEST_DRIVER_REMOVE=y for DT FW (which some people still use): Hisilicon MBIGEN-V2 60080000.interrupt-controller: Failed to create mbi-gen irqdomain Hisilicon MBIGEN-V2: probe of 60080000.interrupt-controller failed with error -12 [...] Unable to handle kernel paging request at virtual address 0000000000005008 Mem abort info: ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000041fb9990000 [0000000000005008] pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.5.0-rc6-00002-g3fc42638a506-dirty #1622 Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT21 Nemo 2.0 RC0 04/18/2018 pstate: 40000085 (nZcv daIf -PAN -UAO) pc : mbigen_set_type+0x38/0x60 lr : __irq_set_trigger+0x6c/0x188 sp : ffff800014b4b400 x29: ffff800014b4b400 x28: 0000000000000007 x27: 0000000000000000 x26: 0000000000000000 x25: ffff041fd83bd0d4 x24: ffff041fd83bd188 x23: 0000000000000000 x22: ffff80001193ce00 x21: 0000000000000004 x20: 0000000000000000 x19: ffff041fd83bd000 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffff8000119098c8 x14: ffff041fb94ec91c x13: ffff041fb94ec1a1 x12: 0000000000000030 x11: 0101010101010101 x10: 0000000000000040 x9 : 0000000000000000 x8 : ffff041fb98c6680 x7 : ffff800014b4b380 x6 : ffff041fd81636c8 x5 : 0000000000000000 x4 : 000000000000025f x3 : 0000000000005000 x2 : 0000000000005008 x1 : 0000000000000004 x0 : 0000000080000000 Call trace: mbigen_set_type+0x38/0x60 __setup_irq+0x744/0x900 request_threaded_irq+0xe0/0x198 pcie_pme_probe+0x98/0x118 pcie_port_probe_service+0x38/0x78 really_probe+0xa0/0x3e0 driver_probe_device+0x58/0x100 __device_attach_driver+0x90/0xb0 bus_for_each_drv+0x64/0xc8 __device_attach+0xd8/0x138 device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 device_add+0x4c4/0x770 device_register+0x1c/0x28 pcie_port_device_register+0x1e4/0x4f0 pcie_portdrv_probe+0x34/0xd8 local_pci_probe+0x3c/0xa0 pci_device_probe+0x128/0x1c0 really_probe+0xa0/0x3e0 driver_probe_device+0x58/0x100 __device_attach_driver+0x90/0xb0 bus_for_each_drv+0x64/0xc8 __device_attach+0xd8/0x138 device_attach+0x10/0x18 pci_bus_add_device+0x4c/0xb8 pci_bus_add_devices+0x38/0x88 pci_host_probe+0x3c/0xc0 pci_host_common_probe+0xf0/0x208 hisi_pcie_almost_ecam_probe+0x24/0x30 platform_drv_probe+0x50/0xa0 really_probe+0xa0/0x3e0 driver_probe_device+0x58/0x100 device_driver_attach+0x6c/0x90 __driver_attach+0x84/0xc8 bus_for_each_dev+0x74/0xc8 driver_attach+0x20/0x28 bus_add_driver+0x148/0x1f0 driver_register+0x60/0x110 __platform_driver_register+0x40/0x48 hisi_pcie_almost_ecam_driver_init+0x1c/0x24 The specific problem here is that the mbigen driver real probe has failed as the mbigen_of_create_domain()->of_platform_device_create() call fails, the reason for that being that we never destroyed the platform device created during the remove test dry run and there is some conflict. Since we generally would never want to unbind this driver, and to save adding a driver tear down path for that, just set the driver .suppress_bind_attrs member to avoid this possibility. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/1579196323-180137-1-git-send-email-john.garry@huawei.com
| | * irqchip: Add Aspeed SCU interrupt controllerEddie James2020-01-202-1/+240
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Aspeed SOCs provide some interrupts through the System Control Unit registers. Add an interrupt controller that provides these interrupts to the system. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/1579123790-6894-3-git-send-email-eajames@linux.ibm.com
| | * irqchip/sifive-plic: Support irq domain hierarchyYash Shah2020-01-202-4/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for hierarchical irq domains. This is needed as pre-requisite for gpio-sifive driver. Signed-off-by: Yash Shah <yash.shah@sifive.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1575976274-13487-4-git-send-email-yash.shah@sifive.com
| | * irqchip/nvic: Use irq_domain_translate_onecell instead of custom funcYash Shah2020-01-201-13/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Make use of newly introduced irq_domain_translate_onecell() instead of custom made function. Signed-off-by: Yash Shah <yash.shah@sifive.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1575976274-13487-3-git-send-email-yash.shah@sifive.com
* | | Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremapLinus Torvalds2020-01-272-2/+2
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ioremap updates from Christoph Hellwig: "Remove the ioremap_nocache API (plus wrappers) that are always identical to ioremap" * tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap: remove ioremap_nocache and devm_ioremap_nocache MIPS: define ioremap_nocache to ioremap
| * | | remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig2020-01-062-2/+2
| |/ / | | | | | | | | | | | | | | | | | | | | | ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
* / / irqchip/ingenic: Get rid of the legacy IRQ domainPaul Cercueil2020-01-131-4/+2
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Get rid of the legacy IRQ domain and hardcoded IRQ base, since all the Ingenic drivers and platform code have been updated to use devicetree. This also fixes the kernel being flooded with messages like: irq: interrupt-controller@10001000 didn't like hwirq-0x0 to VIRQ8 mapping (rc=-19) Fixes: 8bc7464b5140 ("irqchip: ingenic: Alloc generic chips from IRQ domain"). Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Tested-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200113163329.34282-2-paul@crapouillou.net
* / riscv: prefix IRQ_ macro names with an RV_ namespacePaul Walmsley2020-01-041-1/+1
|/ | | | | | | | | | | | "IRQ_TIMER", used in the arch/riscv CSR header file, is a sufficiently generic macro name that it's used by several source files across the Linux code base. Some of these other files ultimately include the arch/riscv CSR include file, causing collisions. Fix by prefixing the RISC-V csr.h IRQ_ macro names with an RV_ prefix. Fixes: a4c3733d32a72 ("riscv: abstract out CSR names for supervisor vs machine mode") Reported-by: Olof Johansson <olof@lixom.net> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
* Merge tag 'pci-v5.5-changes' of ↵Linus Torvalds2019-12-032-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Warn if a host bridge has no NUMA info (Yunsheng Lin) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) Resource management: - Fix boot-time Embedded Controller GPE storm caused by incorrect resource assignment after ACPI Bus Check Notification (Mika Westerberg) - Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) - Consolidate DT "dma-ranges" parsing and convert all host drivers to use shared parsing (Rob Herring) Error reporting: - Restore AER capability after resume (Mayurkumar Patel) - Add PoisonTLPBlocked AER counter (Rajat Jain) - Use for_each_set_bit() to simplify AER code (Andy Shevchenko) - Fix AER kernel-doc (Andy Shevchenko) - Add "pcie_ports=dpc-native" parameter to allow native use of DPC even if platform didn't grant control over AER (Olof Johansson) Hotplug: - Avoid returning prematurely from sysfs requests to enable or disable a PCIe hotplug slot (Lukas Wunner) - Don't disable interrupts twice when suspending hotplug ports (Mika Westerberg) - Fix deadlocks when PCIe ports are hot-removed while suspended (Mika Westerberg) Power management: - Remove unnecessary ASPM locking (Bjorn Helgaas) - Add support for disabling L1 PM Substates (Heiner Kallweit) - Allow re-enabling Clock PM after it has been disabled (Heiner Kallweit) - Add sysfs attributes for controlling ASPM link states (Heiner Kallweit) - Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl" sysfs files (Heiner Kallweit) - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on USB 2.0 or 1.1 connect events (Kai-Heng Feng) - Move power state check out of pci_msi_supported() (Bjorn Helgaas) - Fix incorrect MSI-X masking on resume and revert related nvme quirk for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan) - Always return devices to D0 when thawing to fix hibernation with drivers like mlx4 that used legacy power management (previously we only did it for drivers with new power management ops) (Dexuan Cui) - Clear PCIe PME Status even for legacy power management (Bjorn Helgaas) - Fix PCI PM documentation errors (Bjorn Helgaas) - Use dev_printk() for more power management messages (Bjorn Helgaas) - Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas) - Convert xen-platform from legacy to generic power management (Bjorn Helgaas) - Removed unused .resume_early() and .suspend_late() legacy power management hooks (Bjorn Helgaas) - Rearrange power management code for clarity (Rafael J. Wysocki) - Decode power states more clearly ("4" or "D4" really refers to "D3cold") (Bjorn Helgaas) - Notice when reading PM Control register returns an error (~0) instead of interpreting it as being in D3hot (Bjorn Helgaas) - Add missing link delays required by the PCIe spec (Mika Westerberg) Virtualization: - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn Helgaas) - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Allow VFs to use PASID (the PF PASID capability is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Disconnect PF and VF ATS enablement, since ATS in PFs and associated VFs can be enabled independently (Kuppuswamy Sathyanarayanan) - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan) - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas) - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof Wilczynski) - Remove unused PRI and PASID stubs (Bjorn Helgaas) - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID interfaces that are only used by built-in IOMMU drivers (Bjorn Helgaas) - Hide PRI and PASID state restoration functions used only inside the PCI core (Bjorn Helgaas) - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski) - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut) - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George Cherian) - Fix the UPDCR register address in the Intel ACS quirk (Steffen Liebergeld) - Unify ACS quirk implementations (Bjorn Helgaas) Amlogic Meson host bridge driver: - Fix meson PERST# GPIO polarity problem (Remi Pommarel) - Add DT bindings for Amlogic Meson G12A (Neil Armstrong) - Fix meson clock names to match DT bindings (Neil Armstrong) - Add meson support for Amlogic G12A SoC with separate shared PHY (Neil Armstrong) - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe combo PHY (Neil Armstrong) - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong) - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT (Neil Armstrong) Broadcom iProc host bridge driver: - Invalidate iProc PAXB address mapping before programming it (Abhishek Shah) - Fix iproc-msi and mvebu __iomem annotations (Ben Dooks) Cadence host bridge driver: - Refactor Cadence PCIe host controller to use as a library for both host and endpoint (Tom Joseph) Freescale Layerscape host bridge driver: - Add layerscape LS1028a support (Xiaowei Bao) Intel VMD host bridge driver: - Add VMD bus 224-255 restriction decode (Jon Derrick) - Add VMD 8086:9A0B device ID (Jon Derrick) - Remove Keith from VMD maintainer list (Keith Busch) Marvell ARMADA 3700 / Aardvark host bridge driver: - Use LTSSM state to build link training flag since Aardvark doesn't implement the Link Training bit (Remi Pommarel) - Delay before training Aardvark link in case PERST# was asserted before the driver probe (Remi Pommarel) - Fix Aardvark issues with Root Control reads and writes (Remi Pommarel) - Don't rely on jiffies in Aardvark config access path since interrupts may be disabled (Remi Pommarel) - Fix Aardvark big-endian support (Grzegorz Jaszczyk) Marvell ARMADA 370 / XP host bridge driver: - Make mvebu_pci_bridge_emul_ops static (Ben Dooks) Microsoft Hyper-V host bridge driver: - Add hibernation support for Hyper-V virtual PCI devices (Dexuan Cui) - Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan Cui) - Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui) Mobiveil host bridge driver: - Change mobiveil csr_read()/write() function names that conflict with riscv arch functions (Kefeng Wang) NVIDIA Tegra host bridge driver: - Fix Tegra CLKREQ dependency programming (Vidya Sagar) Renesas R-Car host bridge driver: - Remove unnecessary header include from rcar (Andrew Murray) - Tighten register index checking for rcar inbound range programming (Marek Vasut) - Fix rcar inbound range alignment calculation to improve packing of multiple entries (Marek Vasut) - Update rcar MACCTLR setting to match documentation (Yoshihiro Shimoda) - Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual (Yoshihiro Shimoda) - Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon Horman) Rockchip host bridge driver: - Make rockchip 0V9 and 1V8 power regulators non-optional (Robin Murphy) Socionext UniPhier host bridge driver: - Set uniphier to host (RC) mode always (Kunihiko Hayashi) Endpoint drivers: - Fix endpoint driver sign extension problem when shifting page number to phys_addr_t (Alan Mikhak) Misc: - Add NumaChip SPDX header (Krzysztof Wilczynski) - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski) - Remove unused includes (Krzysztof Wilczynski) - Removed unused sysfs attribute groups (Ben Dooks) - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas) - Add PCIe Link Control 2 register field definitions to replace magic numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas) - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas) - Use pcie_capability_read_word() instead of pci_read_config_word() in AMDGPU and Radeon CIK/SI (Frederick Lawler) - Remove unused pci_irq_get_node() Greg Kroah-Hartman) - Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig (Palmer Dabbelt, Michal Simek) - Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe) - Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn Helgaas) - Fix bridge emulation big-endian support (Grzegorz Jaszczyk) - Fix dwc find_next_bit() usage (Niklas Cassel) - Fix pcitest.c fd leak (Hewenliang) - Fix typos and comments (Bjorn Helgaas) - Fix Kconfig whitespace errors (Krzysztof Kozlowski)" * tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits) PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist asm-generic: Make msi.h a mandatory include/asm header Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T" PCI/MSI: Fix incorrect MSI-X masking on resume PCI/MSI: Move power state check out of pci_msi_supported() PCI/MSI: Remove unused pci_irq_get_node() PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer PCI: hv: Change pci_protocol_version to per-hbus PCI: hv: Add hibernation support PCI: hv: Reorganize the code in preparation of hibernation MAINTAINERS: Remove Keith from VMD maintainer PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code PCI/ASPM: Add sysfs attributes for controlling ASPM link states PCI: Fix indentation drm/radeon: Prefer pcie_capability_read_word() drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/radeon: Correct Transmit Margin masks drm/amdgpu: Prefer pcie_capability_read_word() PCI: uniphier: Set mode register to host mode drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions ...
| * Merge branch 'pci/misc'Bjorn Helgaas2019-11-282-0/+2
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Add NumaChip SPDX header (Krzysztof Wilczynski) - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski) - Remove unused includes (Krzysztof Wilczynski) - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on USB 2.0 or 1.1 connect events (Kai-Heng Feng) - Removed unused sysfs attribute groups (Ben Dooks) - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas) - Add PCIe Link Control 2 register field definitions to replace magic numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas) - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas) - Use pcie_capability_read_word() instead of pci_read_config_word() in AMDGPU and Radeon CIK/SI (Frederick Lawler) * pci/misc: drm/radeon: Prefer pcie_capability_read_word() drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/radeon: Correct Transmit Margin masks drm/amdgpu: Prefer pcie_capability_read_word() drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/amdgpu: Correct Transmit Margin masks PCI: Add #defines for Enter Compliance, Transmit Margin PCI: Allow building PCIe things without PCIEPORTBUS PCI: Remove PCIe Kconfig dependencies on PCI PCI/ASPM: Remove dependency on PCIEPORTBUS PCI/PTM: Remove dependency on PCIEPORTBUS PCI/PTM: Remove spurious "d" from granularity message PCI: sysfs: Remove unused attribute groups x86/PCI: Avoid AMD FCH XHCI USB PME# from D0 defect PCI: Remove unused includes and superfluous struct declaration x86/PCI: Replace deprecated EXTRA_CFLAGS with ccflags-y x86/PCI: Correct SPDX comment style x86/PCI: Add NumaChip SPDX GPL-2.0 to replace COPYING boilerplate
| | * PCI: Remove unused includes and superfluous struct declarationKrzysztof Wilczynski2019-11-212-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove <linux/pci.h> and <linux/msi.h> from being included directly as part of the include/linux/of_pci.h, and remove superfluous declaration of struct of_phandle_args. Move users of include <linux/of_pci.h> to include <linux/pci.h> and <linux/msi.h> directly rather than rely on both being included transitively through <linux/of_pci.h>. Link: https://lore.kernel.org/r/20190903113059.2901-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org>
* | | Merge branch 'irq-core-for-linus' of ↵Linus Torvalds2019-12-0310-139/+733
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Ingo Molnar: "Most of the IRQ subsystem changes in this cycle were irq-chip driver updates: - Qualcomm PDC wakeup interrupt support - Layerscape external IRQ support - Broadcom bcm7038 PM and wakeup support - Ingenic driver cleanup and modernization - GICv3 ITS preparation for GICv4.1 updates - GICv4 fixes There's also the series from Frederic Weisbecker that fixes memory ordering bugs for the irq-work logic, whose primary fix is to turn work->irq_work.flags into an atomic variable and then convert the complex (and buggy) atomic_cmpxchg() loop in irq_work_claim() into a much simpler atomic_fetch_or() call. There are also various smaller cleanups" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) pinctrl/sdm845: Add PDC wakeup interrupt map for GPIOs pinctrl/msm: Setup GPIO chip in hierarchy irqchip/qcom-pdc: Add irqchip set/get state calls irqchip/qcom-pdc: Add irqdomain for wakeup capable GPIOs irqchip/qcom-pdc: Do not toggle IRQ_ENABLE during mask/unmask irqchip/qcom-pdc: Update max PDC interrupts of/irq: Document properties for wakeup interrupt parent genirq: Introduce irq_chip_get/set_parent_state calls irqdomain: Add bus token DOMAIN_BUS_WAKEUP genirq: Fix function documentation of __irq_alloc_descs() irq_work: Fix IRQ_WORK_BUSY bit clearing irqchip/ti-sci-inta: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)) irq_work: Slightly simplify IRQ_WORK_PENDING clearing irq_work: Fix irq_work_claim() memory ordering irq_work: Convert flags to atomic_t irqchip: Ingenic: Add process for more than one irq at the same time. irqchip: ingenic: Alloc generic chips from IRQ domain irqchip: ingenic: Get virq number from IRQ domain irqchip: ingenic: Error out if IRQ domain creation failed irqchip: ingenic: Drop redundant irq_suspend / irq_resume functions ...
| * | | irqchip/qcom-pdc: Add irqchip set/get state callsMaulik Shah2019-11-161-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add irqchip calls to set/get interrupt state from the parent interrupt controller. When GPIOs are renabled as interrupt lines, it is desirable to clear the interrupt state at the GIC. This avoids any unwanted interrupt as a result of stale pending state recorded when the line was used as a GPIO. Signed-off-by: Maulik Shah <mkshah@codeaurora.org> [Lina: updated commit text, rearranged code] Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1573855915-9841-8-git-send-email-ilina@codeaurora.org
| * | | irqchip/qcom-pdc: Add irqdomain for wakeup capable GPIOsLina Iyer2019-11-161-9/+95
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce a new domain for wakeup capable GPIOs. The domain can be requested using the bus token DOMAIN_BUS_WAKEUP. In the following patches, we will specify PDC as the wakeup-parent for the TLMM GPIO irqchip. Requesting a wakeup GPIO will setup the GPIO and the corresponding PDC interrupt as its parent. Co-developed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1573855915-9841-5-git-send-email-ilina@codeaurora.org
| * | | irqchip/qcom-pdc: Do not toggle IRQ_ENABLE during mask/unmaskLina Iyer2019-11-161-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When an interrupt is to be serviced, the convention is to mask the interrupt at the chip and unmask after servicing the interrupt. Enabling and disabling the interrupt at the PDC irqchip causes an interrupt storm due to the way dual edge interrupts are handled in hardware. Skip configuring the PDC when the IRQ is masked and unmasked, instead use the irq_enable/irq_disable callbacks to toggle the IRQ_ENABLE register at the PDC. The PDC's IRQ_ENABLE register is only used during the monitoring mode when the system is asleep and is not needed for active mode detection. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1573855915-9841-4-git-send-email-ilina@codeaurora.org
| * | | irqchip/qcom-pdc: Update max PDC interruptsLina Iyer2019-11-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Newer SoCs have increased the number of interrupts routed to the PDC interrupt controller. Update the definition of max PDC interrupts. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1573855915-9841-3-git-send-email-ilina@codeaurora.org
| * | | irqchip/ti-sci-inta: Use ERR_CAST inlined function instead of ↵Markus Elfring2019-11-111-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ERR_PTR(PTR_ERR(...)) A coccicheck run provided information like the following. drivers/irqchip/irq-ti-sci-inta.c:250:9-16: WARNING: ERR_CAST can be used with vint_desc. Generated by: scripts/coccinelle/api/err_cast.cocci Thus adjust the exception handling in one if branch. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/776b7135-26af-df7d-c3a9-4339f7bf1f15@web.de
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-30 23:38:44 +0000