summaryrefslogtreecommitdiffstats
path: root/drivers/md/dm-thin.c
Commit message (Collapse)AuthorAgeFilesLines
* dm thin: add sanity checks to thin-pool and external snapshot creationJason Cai (Xiang Feng)2019-03-051-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Invoking dm_get_device() twice on the same device path with different modes is dangerous. Because in that case, upgrade_mode() will alloc a new 'dm_dev' and free the old one, which may be referenced by a previous caller. Dereferencing the dangling pointer will trigger kernel NULL pointer dereference. The following two cases can reproduce this issue. Actually, they are invalid setups that must be disallowed, e.g.: 1. Creating a thin-pool with read_only mode, and the same device as both metadata and data. dmsetup create thinp --table \ "0 41943040 thin-pool /dev/vdb /dev/vdb 128 0 1 read_only" BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 ... Call Trace: new_read+0xfb/0x110 [dm_bufio] dm_bm_read_lock+0x43/0x190 [dm_persistent_data] ? kmem_cache_alloc_trace+0x15c/0x1e0 __create_persistent_data_objects+0x65/0x3e0 [dm_thin_pool] dm_pool_metadata_open+0x8c/0xf0 [dm_thin_pool] pool_ctr.cold.79+0x213/0x913 [dm_thin_pool] ? realloc_argv+0x50/0x70 [dm_mod] dm_table_add_target+0x14e/0x330 [dm_mod] table_load+0x122/0x2e0 [dm_mod] ? dev_status+0x40/0x40 [dm_mod] ctl_ioctl+0x1aa/0x3e0 [dm_mod] dm_ctl_ioctl+0xa/0x10 [dm_mod] do_vfs_ioctl+0xa2/0x600 ? handle_mm_fault+0xda/0x200 ? __do_page_fault+0x26c/0x4f0 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x55/0x150 entry_SYSCALL_64_after_hwframe+0x44/0xa9 2. Creating a external snapshot using the same thin-pool device. dmsetup create thinp --table \ "0 41943040 thin-pool /dev/vdc /dev/vdb 128 0 2 ignore_discard" dmsetup message /dev/mapper/thinp 0 "create_thin 0" dmsetup create snap --table \ "0 204800 thin /dev/mapper/thinp 0 /dev/mapper/thinp" BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 ... Call Trace: ? __alloc_pages_nodemask+0x13c/0x2e0 retrieve_status+0xa5/0x1f0 [dm_mod] ? dm_get_live_or_inactive_table.isra.7+0x20/0x20 [dm_mod] table_status+0x61/0xa0 [dm_mod] ctl_ioctl+0x1aa/0x3e0 [dm_mod] dm_ctl_ioctl+0xa/0x10 [dm_mod] do_vfs_ioctl+0xa2/0x600 ksys_ioctl+0x60/0x90 ? ksys_write+0x4f/0xb0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x55/0x150 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by: Jason Cai (Xiang Feng) <jason.cai@linux.alibaba.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: eliminate 'split_discard_bios' flag from DM target interfaceMike Snitzer2019-02-201-1/+0
| | | | | | | | | There is no need to have DM core split discards on behalf of a DM target now that blk_queue_split() handles splitting discards based on the queue_limits. A DM target just needs to set max_discard_sectors, discard_granularity, etc, in queue_limits. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm thin: fix bug where bio that overwrites thin block ignores FUANikos Tsironis2019-02-141-5/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When provisioning a new data block for a virtual block, either because the block was previously unallocated or because we are breaking sharing, if the whole block of data is being overwritten the bio that triggered the provisioning is issued immediately, skipping copying or zeroing of the data block. When this bio completes the new mapping is inserted in to the pool's metadata by process_prepared_mapping(), where the bio completion is signaled to the upper layers. This completion is signaled without first committing the metadata. If the bio in question has the REQ_FUA flag set and the system crashes right after its completion and before the next metadata commit, then the write is lost despite the REQ_FUA flag requiring that I/O completion for this request must only be signaled after the data has been committed to non-volatile storage. Fix this by deferring the completion of overwrite bios, with the REQ_FUA flag set, until after the metadata has been committed. Cc: stable@vger.kernel.org Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com> Acked-by: Joe Thornber <ejt@redhat.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm thin: fix passdown_double_checking_shared_status()Joe Thornber2019-01-151-5/+5
| | | | | | | | | | | | | | | | | | | | | | | Commit 00a0ea33b495 ("dm thin: do not queue freed thin mapping for next stage processing") changed process_prepared_discard_passdown_pt1() to increment all the blocks being discarded until after the passdown had completed to avoid them being prematurely reused. IO issued to a thin device that breaks sharing with a snapshot, followed by a discard issued to snapshot(s) that previously shared the block(s), results in passdown_double_checking_shared_status() being called to iterate through the blocks double checking their reference count is zero and issuing the passdown if so. So a side effect of commit 00a0ea33b495 is passdown_double_checking_shared_status() was broken. Fix this by checking if the block reference count is greater than 1. Also, rename dm_pool_block_is_used() to dm_pool_block_is_shared(). Fixes: 00a0ea33b495 ("dm thin: do not queue freed thin mapping for next stage processing") Cc: stable@vger.kernel.org # 4.9+ Reported-by: ryan.p.norwood@gmail.com Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm thin: bump target versionMike Snitzer2018-12-121-2/+2
| | | | | | | | Decoupled version bump from commit f6c367585d0 ("dm thin: send event about thin-pool state change _after_ making it") because version bumps just create conflicts when backporting to the stable trees. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm thin: send event about thin-pool state change _after_ making itMike Snitzer2018-12-111-33/+35
| | | | | | | | | | | | | | | | | Sending a DM event before a thin-pool state change is about to happen is a bug. It wasn't realized until it became clear that userspace response to the event raced with the actual state change that the event was meant to notify about. Fix this by first updating internal thin-pool state to reflect what the DM event is being issued about. This fixes a long-standing racey/buggy userspace device-mapper-test-suite 'resize_io' test that would get an event but not find the state it was looking for -- so it would just go on to hang because no other events caused the test to reevaluate the thin-pool's state. Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm thin: use refcount_t for thin_c reference countingJohn Pittman2018-10-161-4/+4
| | | | | | | | | | | | The API surrounding refcount_t should be used in place of atomic_t when variables are being used as reference counters. It can potentially prevent reference counter overflows and use-after-free conditions. In the dm thin layer, one such example is tc->refcount. Change this from the atomic_t API to the refcount_t API to prevent mentioned conditions. Signed-off-by: John Pittman <jpittman@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm thin metadata: try to avoid ever aborting transactionsJoe Thornber2018-09-101-8/+65
| | | | | | | | | | | | | | | | | | | | Committing a transaction can consume some metadata of it's own, we now reserve a small amount of metadata to cover this. Free metadata reported by the kernel will not include this reserve. If any of the reserve has been used after a commit we enter a new internal state PM_OUT_OF_METADATA_SPACE. This is reported as PM_READ_ONLY, so no userland changes are needed. If the metadata device is resized the pool will move back to PM_WRITE. These changes mean we never need to abort and rollback a transaction due to running out of metadata space. This is particularly important because there have been a handful of reports of data corruption against DM thin-provisioning that can all be attributed to the thin-pool having ran out of metadata space. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm thin: stop no_space_timeout worker when switching to write-modeHou Tao2018-08-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now both check_for_space() and do_no_space_timeout() will read & write pool->pf.error_if_no_space. If these functions run concurrently, as shown in the following case, the default setting of "queue_if_no_space" can get lost. precondition: * error_if_no_space = false (aka "queue_if_no_space") * pool is in Out-of-Data-Space (OODS) mode * no_space_timeout worker has been queued CPU 0: CPU 1: // delete a thin device process_delete_mesg() // check_for_space() invoked by commit() set_pool_mode(pool, PM_WRITE) pool->pf.error_if_no_space = \ pt->requested_pf.error_if_no_space // timeout, pool is still in OODS mode do_no_space_timeout // "queue_if_no_space" config is lost pool->pf.error_if_no_space = true pool->pf.mode = new_mode Fix it by stopping no_space_timeout worker when switching to write mode. Fixes: bcc696fac11f ("dm thin: stay in out-of-data-space mode once no_space_timeout expires") Cc: stable@vger.kernel.org Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm kcopyd: return void from dm_kcopyd_copy()Mike Snitzer2018-07-311-20/+3
| | | | | | | dm_kcopyd_copy() only ever returns 0 so there is no need for callers to account for possible failure. Same goes for dm_kcopyd_zero(). Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm thin: include metadata_low_watermark threshold in pool statusAndy Grover2018-07-301-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The metadata low watermark threshold is set by the kernel. But the kernel depends on userspace to extend the thinpool metadata device when the threshold is crossed. Since the metadata low watermark threshold is not visible to userspace, upon receiving an event, userspace cannot tell that the kernel wants the metadata device extended, instead of some other eventing condition. Making it visible (but not settable) enables userspace to affirmatively know the kernel is asking for a metadata device extension, by comparing metadata_low_watermark against nr_free_blocks_metadata, also reported in status. Current solutions like dmeventd have their own thresholds for extending the data and metadata devices, and both devices are checked against their thresholds on each event. This lessens the value of the kernel-set threshold, since userspace will either extend the metadata device sooner, when receiving another event; or will receive the metadata lowater event and do nothing, if dmeventd's threshold is less than the kernel's. (This second case is dangerous. The metadata lowater event will not be re-sent, so no further event will be generated before the metadata device is out if space, unless some other event causes userspace to recheck its thresholds.) Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm thin: handle running out of data space vs concurrent discardMike Snitzer2018-06-271-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Discards issued to a DM thin device can complete to userspace (via fstrim) _before_ the metadata changes associated with the discards is reflected in the thinp superblock (e.g. free blocks). As such, if a user constructs a test that loops repeatedly over these steps, block allocation can fail due to discards not having completed yet: 1) fill thin device via filesystem file 2) remove file 3) fstrim From initial report, here: https://www.redhat.com/archives/dm-devel/2018-April/msg00022.html "The root cause of this issue is that dm-thin will first remove mapping and increase corresponding blocks' reference count to prevent them from being reused before DISCARD bios get processed by the underlying layers. However. increasing blocks' reference count could also increase the nr_allocated_this_transaction in struct sm_disk which makes smd->old_ll.nr_allocated + smd->nr_allocated_this_transaction bigger than smd->old_ll.nr_blocks. In this case, alloc_data_block() will never commit metadata to reset the begin pointer of struct sm_disk, because sm_disk_get_nr_free() always return an underflow value." While there is room for improvement to the space-map accounting that thinp is making use of: the reality is this test is inherently racey and will result in the previous iteration's fstrim's discard(s) completing vs concurrent block allocation, via dd, in the next iteration of the loop. No amount of space map accounting improvements will be able to allow user's to use a block before a discard of that block has completed. So the best we can really do is allow DM thinp to gracefully handle such aggressive use of all the pool's data by degrading the pool into out-of-data-space (OODS) mode. We _should_ get that behaviour already (if space map accounting didn't falsely cause alloc_data_block() to believe free space was available).. but short of that we handle the current reality that dm_pool_alloc_data_block() can return -ENOSPC. Reported-by: Dennis Yang <dennisyang@qnap.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* Merge tag 'overflow-v4.18-rc1-part2' of ↵Linus Torvalds2018-06-121-1/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull more overflow updates from Kees Cook: "The rest of the overflow changes for v4.18-rc1. This includes the explicit overflow fixes from Silvio, further struct_size() conversions from Matthew, and a bug fix from Dan. But the bulk of it is the treewide conversions to use either the 2-factor argument allocators (e.g. kmalloc(a * b, ...) into kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a * b) into vmalloc(array_size(a, b)). Coccinelle was fighting me on several fronts, so I've done a bunch of manual whitespace updates in the patches as well. Summary: - Error path bug fix for overflow tests (Dan) - Additional struct_size() conversions (Matthew, Kees) - Explicitly reported overflow fixes (Silvio, Kees) - Add missing kvcalloc() function (Kees) - Treewide conversions of allocators to use either 2-factor argument variant when available, or array_size() and array3_size() as needed (Kees)" * tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits) treewide: Use array_size in f2fs_kvzalloc() treewide: Use array_size() in f2fs_kzalloc() treewide: Use array_size() in f2fs_kmalloc() treewide: Use array_size() in sock_kmalloc() treewide: Use array_size() in kvzalloc_node() treewide: Use array_size() in vzalloc_node() treewide: Use array_size() in vzalloc() treewide: Use array_size() in vmalloc() treewide: devm_kzalloc() -> devm_kcalloc() treewide: devm_kmalloc() -> devm_kmalloc_array() treewide: kvzalloc() -> kvcalloc() treewide: kvmalloc() -> kvmalloc_array() treewide: kzalloc_node() -> kcalloc_node() treewide: kzalloc() -> kcalloc() treewide: kmalloc() -> kmalloc_array() mm: Introduce kvcalloc() video: uvesafb: Fix integer overflow in allocation UBIFS: Fix potential integer overflow in allocation leds: Use struct_size() in allocation Convert intel uncore to struct_size ...
| * treewide: Use array_size() in vmalloc()Kees Cook2018-06-121-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The vmalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vmalloc(a * b) with: vmalloc(array_size(a, b)) as well as handling cases of: vmalloc(a * b * c) with: vmalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vmalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(char) * COUNT + COUNT , ...) | vmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vmalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vmalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vmalloc(C1 * C2 * C3, ...) | vmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vmalloc(C1 * C2, ...) | vmalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
* | dm: adjust structure members to improve alignmentMike Snitzer2018-06-081-2/+3
|/ | | | | | | | | Eliminate most holes in DM data structures that were modified by commit 6f1c819c21 ("dm: convert to bioset_init()/mempool_init()"). Also prevent structure members from unnecessarily spanning cache lines. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: Use kzalloc for all structs with embedded biosets/mempoolsKent Overstreet2018-06-051-1/+1
| | | | | | | | | | | | mempool_init()/bioset_init() require that the mempools/biosets be zeroed first; they probably should not _require_ this, but not allocating those structs with kzalloc is a fairly nonsensical thing to do (calling mempool_exit()/bioset_exit() on an uninitialized mempool/bioset is legal and safe, but only works if said memory was zeroed.) Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* dm: convert to bioset_init()/mempool_init()Kent Overstreet2018-05-301-16/+16
| | | | | | | | Convert dm to embedded bio sets. Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* dm: allow targets to return output from messages they are sentMike Snitzer2018-04-031-1/+2
| | | | | | | | Could be useful for a target to return stats or other information. If a target does DMEMIT() anything to @result from its .message method then it must return 1 to the caller. Signed-off-By: Mike Snitzer <snitzer@redhat.com>
* dm thin: fix trailing semicolon in __remap_and_issue_shared_cellLuis de Bethencourt2018-01-291-1/+1
| | | | | | | | The trailing semicolon is an empty statement that does no operation. Removing it since it doesn't do anything. Signed-off-by: Luis de Bethencourt <luisbg@kernel.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: backfill missing calls to mutex_destroy()Mike Snitzer2018-01-171-0/+7
| | | | Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: fix various targets to dm_register_target after module __init resources ↵monty_pavel@sina.com2017-12-041-12/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | created A NULL pointer is seen if two concurrent "vgchange -ay -K <vg name>" processes race to load the dm-thin-pool module: PID: 25992 TASK: ffff883cd7d23500 CPU: 4 COMMAND: "vgchange" #0 [ffff883cd743d600] machine_kexec at ffffffff81038fa9 0000001 [ffff883cd743d660] crash_kexec at ffffffff810c5992 0000002 [ffff883cd743d730] oops_end at ffffffff81515c90 0000003 [ffff883cd743d760] no_context at ffffffff81049f1b 0000004 [ffff883cd743d7b0] __bad_area_nosemaphore at ffffffff8104a1a5 0000005 [ffff883cd743d800] bad_area at ffffffff8104a2ce 0000006 [ffff883cd743d830] __do_page_fault at ffffffff8104aa6f 0000007 [ffff883cd743d950] do_page_fault at ffffffff81517bae 0000008 [ffff883cd743d980] page_fault at ffffffff81514f95 [exception RIP: kmem_cache_alloc+108] RIP: ffffffff8116ef3c RSP: ffff883cd743da38 RFLAGS: 00010046 RAX: 0000000000000004 RBX: ffffffff81121b90 RCX: ffff881bf1e78cc0 RDX: 0000000000000000 RSI: 00000000000000d0 RDI: 0000000000000000 RBP: ffff883cd743da68 R8: ffff881bf1a4eb00 R9: 0000000080042000 R10: 0000000000002000 R11: 0000000000000000 R12: 00000000000000d0 R13: 0000000000000000 R14: 00000000000000d0 R15: 0000000000000246 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 0000009 [ffff883cd743da70] mempool_alloc_slab at ffffffff81121ba5 0000010 [ffff883cd743da80] mempool_create_node at ffffffff81122083 0000011 [ffff883cd743dad0] mempool_create at ffffffff811220f4 0000012 [ffff883cd743dae0] pool_ctr at ffffffffa08de049 [dm_thin_pool] 0000013 [ffff883cd743dbd0] dm_table_add_target at ffffffffa0005f2f [dm_mod] 0000014 [ffff883cd743dc30] table_load at ffffffffa0008ba9 [dm_mod] 0000015 [ffff883cd743dc90] ctl_ioctl at ffffffffa0009dc4 [dm_mod] The race results in a NULL pointer because: Process A (vgchange -ay -K): a. send DM_LIST_VERSIONS_CMD ioctl; b. pool_target not registered; c. modprobe dm_thin_pool and wait until end. Process B (vgchange -ay -K): a. send DM_LIST_VERSIONS_CMD ioctl; b. pool_target registered; c. table_load->dm_table_add_target->pool_ctr; d. _new_mapping_cache is NULL and panic. Note: 1. process A and process B are two concurrent processes. 2. pool_target can be detected by process B but _new_mapping_cache initialization has not ended. To fix dm-thin-pool, and other targets (cache, multipath, and snapshot) with the same problem, simply dm_register_target() after all resources created during module init (as labelled with __init) are finished. Cc: stable@vger.kernel.org Signed-off-by: monty <monty_pavel@sina.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns ↵Mark Rutland2017-10-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
* Merge tag 'for-4.14/dm-changes' of ↵Linus Torvalds2017-09-141-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Some request-based DM core and DM multipath fixes and cleanups - Constify a few variables in DM core and DM integrity - Add bufio optimization and checksum failure accounting to DM integrity - Fix DM integrity to avoid checking integrity of failed reads - Fix DM integrity to use init_completion - A couple DM log-writes target fixes - Simplify DAX flushing by eliminating the unnecessary flush abstraction that was stood up for DM's use. * tag 'for-4.14/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dax: remove the pmem_dax_ops->flush abstraction dm integrity: use init_completion instead of COMPLETION_INITIALIZER_ONSTACK dm integrity: make blk_integrity_profile structure const dm integrity: do not check integrity for failed read operations dm log writes: fix >512b sectorsize support dm log writes: don't use all the cpu while waiting to log blocks dm ioctl: constify ioctl lookup table dm: constify argument arrays dm integrity: count and display checksum failures dm integrity: optimize writing dm-bufio buffers that are partially changed dm rq: do not update rq partially in each ending bio dm rq: make dm-sq requeuing behavior consistent with dm-mq behavior dm mpath: complain about unsupported __multipath_map_bio() return values dm mpath: avoid that building with W=1 causes gcc 7 to complain about fall-through
| * dm: constify argument arraysEric Biggers2017-08-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | The arrays of 'struct dm_arg' are never modified by the device-mapper core, so constify them so that they are placed in .rodata. (Exception: the args array in dm-raid cannot be constified because it is allocated on the stack and modified.) Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* | block: replace bi_bdev with a gendisk pointer and partitions indexChristoph Hellwig2017-08-231-3/+3
|/ | | | | | | | | | | | | | | | | | | | This way we don't need a block_device structure to submit I/O. The block_device has different life time rules from the gendisk and request_queue and is usually only available when the block device node is open. Other callers need to explicitly create one (e.g. the lightnvm passthrough code, or the new nvme multipathing code). For the actual I/O path all that we need is the gendisk, which exists once per block device. But given that the block layer also does partition remapping we additionally need a partition index, which is used for said remapping in generic_make_request. Note that all the block drivers generally want request_queue or sometimes the gendisk, so this removes a layer of indirection all over the stack. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Merge branch 'for-4.13/block' of git://git.kernel.dk/linux-blockLinus Torvalds2017-07-031-34/+33
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull core block/IO updates from Jens Axboe: "This is the main pull request for the block layer for 4.13. Not a huge round in terms of features, but there's a lot of churn related to some core cleanups. Note this depends on the UUID tree pull request, that Christoph already sent out. This pull request contains: - A series from Christoph, unifying the error/stats codes in the block layer. We now use blk_status_t everywhere, instead of using different schemes for different places. - Also from Christoph, some cleanups around request allocation and IO scheduler interactions in blk-mq. - And yet another series from Christoph, cleaning up how we handle and do bounce buffering in the block layer. - A blk-mq debugfs series from Bart, further improving on the support we have for exporting internal information to aid debugging IO hangs or stalls. - Also from Bart, a series that cleans up the request initialization differences across types of devices. - A series from Goldwyn Rodrigues, allowing the block layer to return failure if we will block and the user asked for non-blocking. - Patch from Hannes for supporting setting loop devices block size to that of the underlying device. - Two series of patches from Javier, fixing various issues with lightnvm, particular around pblk. - A series from me, adding support for write hints. This comes with NVMe support as well, so applications can help guide data placement on flash to improve performance, latencies, and write amplification. - A series from Ming, improving and hardening blk-mq support for stopping/starting and quiescing hardware queues. - Two pull requests for NVMe updates. Nothing major on the feature side, but lots of cleanups and bug fixes. From the usual crew. - A series from Neil Brown, greatly improving the bio rescue set support. Most notably, this kills the bio rescue work queues, if we don't really need them. - Lots of other little bug fixes that are all over the place" * 'for-4.13/block' of git://git.kernel.dk/linux-block: (217 commits) lightnvm: pblk: set line bitmap check under debug lightnvm: pblk: verify that cache read is still valid lightnvm: pblk: add initialization check lightnvm: pblk: remove target using async. I/Os lightnvm: pblk: use vmalloc for GC data buffer lightnvm: pblk: use right metadata buffer for recovery lightnvm: pblk: schedule if data is not ready lightnvm: pblk: remove unused return variable lightnvm: pblk: fix double-free on pblk init lightnvm: pblk: fix bad le64 assignations nvme: Makefile: remove dead build rule blk-mq: map all HWQ also in hyperthreaded system nvmet-rdma: register ib_client to not deadlock in device removal nvme_fc: fix error recovery on link down. nvmet_fc: fix crashes on bad opcodes nvme_fc: Fix crash when nvme controller connection fails. nvme_fc: replace ioabort msleep loop with completion nvme_fc: fix double calls to nvme_cleanup_cmd() nvme-fabrics: verify that a controller returns the correct NQN nvme: simplify nvme_dev_attrs_are_visible ...
| * block: switch bios to blk_status_tChristoph Hellwig2017-06-091-33/+32
| | | | | | | | | | | | | | | | | | | | Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
| * dm: change ->end_io calling conventionChristoph Hellwig2017-06-091-2/+2
| | | | | | | | | | | | | | | | | | | | Turn the error paramter into a pointer so that target drivers can change the value, and make sure only DM_ENDIO_* values are returned from the methods. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* | dm thin: do not queue freed thin mapping for next stage processingVallish Vaidyeshwara2017-06-271-13/+13
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | process_prepared_discard_passdown_pt1() should cleanup dm_thin_new_mapping in cases of error. dm_pool_inc_data_range() can fail trying to get a block reference: metadata operation 'dm_pool_inc_data_range' failed: error = -61 When dm_pool_inc_data_range() fails, dm thin aborts current metadata transaction and marks pool as PM_READ_ONLY. Memory for thin mapping is released as well. However, current thin mapping will be queued onto next stage as part of queue_passdown_pt2() or passdown_endio(). This dangling thin mapping memory when processed and accessed in next stage will lead to device mapper crashing. Code flow without fix: -> process_prepared_discard_passdown_pt1(m) -> dm_thin_remove_range() -> discard passdown --> passdown_endio(m) queues m onto next stage -> dm_pool_inc_data_range() fails, frees memory m but does not remove it from next stage queue -> process_prepared_discard_passdown_pt2(m) -> processes freed memory m and crashes One such stack: Call Trace: [<ffffffffa037a46f>] dm_cell_release_no_holder+0x2f/0x70 [dm_bio_prison] [<ffffffffa039b6dc>] cell_defer_no_holder+0x3c/0x80 [dm_thin_pool] [<ffffffffa039b88b>] process_prepared_discard_passdown_pt2+0x4b/0x90 [dm_thin_pool] [<ffffffffa0399611>] process_prepared+0x81/0xa0 [dm_thin_pool] [<ffffffffa039e735>] do_worker+0xc5/0x820 [dm_thin_pool] [<ffffffff8152bf54>] ? __schedule+0x244/0x680 [<ffffffff81087e72>] ? pwq_activate_delayed_work+0x42/0xb0 [<ffffffff81089f53>] process_one_work+0x153/0x3f0 [<ffffffff8108a71b>] worker_thread+0x12b/0x4b0 [<ffffffff8108a5f0>] ? rescuer_thread+0x350/0x350 [<ffffffff8108fd6a>] kthread+0xca/0xe0 [<ffffffff8108fca0>] ? kthread_park+0x60/0x60 [<ffffffff81530b45>] ret_from_fork+0x25/0x30 The fix is to first take the block ref count for discarded block and then do a passdown discard of this block. If block ref count fails, then bail out aborting current metadata transaction, mark pool as PM_READ_ONLY and also free current thin mapping memory (existing error handling code) without queueing this thin mapping onto next stage of processing. If block ref count succeeds, then passdown discard of this block. Discard callback of passdown_endio() will queue this thin mapping onto next stage of processing. Code flow with fix: -> process_prepared_discard_passdown_pt1(m) -> dm_thin_remove_range() -> dm_pool_inc_data_range() --> if fails, free memory m and bail out -> discard passdown --> passdown_endio(m) queues m onto next stage Cc: stable <stable@vger.kernel.org> # v4.9+ Reviewed-by: Eduardo Valentin <eduval@amazon.com> Reviewed-by: Cristian Gafton <gafton@amazon.com> Reviewed-by: Anchal Agarwal <anchalag@amazon.com> Signed-off-by: Vallish Vaidyeshwara <vallish@amazon.com> Reviewed-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* Merge tag 'for-4.12/dm-changes' of ↵Linus Torvalds2017-05-031-1/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - A major update for DM cache that reduces the latency for deciding whether blocks should migrate to/from the cache. The bio-prison-v2 interface supports this improvement by enabling direct dispatch of work to workqueues rather than having to delay the actual work dispatch to the DM cache core. So the dm-cache policies are much more nimble by being able to drive IO as they see fit. One immediate benefit from the improved latency is a cache that should be much more adaptive to changing workloads. - Add a new DM integrity target that emulates a block device that has additional per-sector tags that can be used for storing integrity information. - Add a new authenticated encryption feature to the DM crypt target that builds on the capabilities provided by the DM integrity target. - Add MD interface for switching the raid4/5/6 journal mode and update the DM raid target to use it to enable aid4/5/6 journal write-back support. - Switch the DM verity target over to using the asynchronous hash crypto API (this helps work better with architectures that have access to off-CPU algorithm providers, which should reduce CPU utilization). - Various request-based DM and DM multipath fixes and improvements from Bart and Christoph. - A DM thinp target fix for a bio structure leak that occurs for each discard IFF discard passdown is enabled. - A fix for a possible deadlock in DM bufio and a fix to re-check the new buffer allocation watermark in the face of competing admin changes to the 'max_cache_size_bytes' tunable. - A couple DM core cleanups. * tag 'for-4.12/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (50 commits) dm bufio: check new buffer allocation watermark every 30 seconds dm bufio: avoid a possible ABBA deadlock dm mpath: make it easier to detect unintended I/O request flushes dm mpath: cleanup QUEUE_IF_NO_PATH bit manipulation by introducing assign_bit() dm mpath: micro-optimize the hot path relative to MPATHF_QUEUE_IF_NO_PATH dm: introduce enum dm_queue_mode to cleanup related code dm mpath: verify __pg_init_all_paths locking assumptions at runtime dm: verify suspend_locking assumptions at runtime dm block manager: remove an unused argument from dm_block_manager_create() dm rq: check blk_mq_register_dev() return value in dm_mq_init_request_queue() dm mpath: delay requeuing while path initialization is in progress dm mpath: avoid that path removal can trigger an infinite loop dm mpath: split and rename activate_path() to prepare for its expanded use dm ioctl: prevent stack leak in dm ioctl call dm integrity: use previously calculated log2 of sectors_per_block dm integrity: use hex2bin instead of open-coded variant dm crypt: replace custom implementation of hex2bin() dm crypt: remove obsolete references to per-CPU state dm verity: switch to using asynchronous hash crypto API dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues ...
| * dm thin: fix a memory leak when passing discard bio downDennis Yang2017-04-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dm-thin does not free the discard_parent bio after all chained sub bios finished. The following kmemleak report could be observed after pool with discard_passdown option processes discard bios in linux v4.11-rc7. To fix this, we drop the discard_parent bio reference when its endio (passdown_endio) called. unreferenced object 0xffff8803d6b29700 (size 256): comm "kworker/u8:0", pid 30349, jiffies 4379504020 (age 143002.776s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 01 00 00 00 00 00 00 f0 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a5efd9>] kmemleak_alloc+0x49/0xa0 [<ffffffff8114ec34>] kmem_cache_alloc+0xb4/0x100 [<ffffffff8110eec0>] mempool_alloc_slab+0x10/0x20 [<ffffffff8110efa5>] mempool_alloc+0x55/0x150 [<ffffffff81374939>] bio_alloc_bioset+0xb9/0x260 [<ffffffffa018fd20>] process_prepared_discard_passdown_pt1+0x40/0x1c0 [dm_thin_pool] [<ffffffffa018b409>] break_up_discard_bio+0x1a9/0x200 [dm_thin_pool] [<ffffffffa018b484>] process_discard_cell_passdown+0x24/0x40 [dm_thin_pool] [<ffffffffa018b24d>] process_discard_bio+0xdd/0xf0 [dm_thin_pool] [<ffffffffa018ecf6>] do_worker+0xa76/0xd50 [dm_thin_pool] [<ffffffff81086239>] process_one_work+0x139/0x370 [<ffffffff810867b1>] worker_thread+0x61/0x450 [<ffffffff8108b316>] kthread+0xd6/0xf0 [<ffffffff81a6cd1f>] ret_from_fork+0x3f/0x70 [<ffffffffffffffff>] 0xffffffffffffffff Cc: stable@vger.kernel.org Signed-off-by: Dennis Yang <dennisyang@qnap.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
| * dm bio prison v2: new interface for the bio prisonJoe Thornber2017-03-071-1/+1
| | | | | | | | | | | | | | | | | | The deferred set is gone and all methods have _v2 appended to the end of their names to allow for continued use of the original bio prison in DM thin-provisioning. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* | block: remove the discard_zeroes_data flagChristoph Hellwig2017-04-081-2/+0
|/ | | | | | | | | | Now that we use the proper REQ_OP_WRITE_ZEROES operation everywhere we can kill this hack. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* block: Use pointer to backing_dev_info from request_queueJan Kara2017-02-021-1/+1
| | | | | | | | | | | We will want to have struct backing_dev_info allocated separately from struct request_queue. As the first step add pointer to backing_dev_info to request_queue and convert all users touching it. No functional changes in this patch. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
* block: add a op_is_flush helperChristoph Hellwig2017-01-271-8/+5
| | | | | | | | | | This centralizes the checks for bios that needs to be go into the flush state machine. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* block: rename bio bi_rw to bi_opfJens Axboe2016-08-071-4/+4
| | | | | | | | | | | | | Since commit 63a4cc24867d, bio->bi_rw contains flags in the lower portion and the op code in the higher portions. This means that old code that relies on manually setting bi_rw is most likely going to be broken. Instead of letting that brokeness linger, rename the member, to force old and out-of-tree code to break at compile time instead of at runtime. No intended functional changes in this commit. Signed-off-by: Jens Axboe <axboe@fb.com>
* dm thin: fix a race condition between discarding and provisioning a blockJoe Thornber2016-07-201-11/+91
| | | | | | | | | | | | | | | | | | | | | | | The discard passdown was being issued after the block was unmapped, which meant the block could be reprovisioned whilst the passdown discard was still in flight. We can only identify unshared blocks (safe to do a passdown a discard to) once they're unmapped and their ref count hits zero. Block ref counts are now used to guard against concurrent allocation of these blocks that are being discarded. So now we unmap the block, issue passdown discards, and the immediately increment ref counts for regions that have been discarded via passed down (this is safe because allocation occurs within the same thread). We then decrement ref counts once the passdown discard IO is complete -- signaling these blocks may now be allocated. This fixes the potential for corruption that was reported here: https://www.redhat.com/archives/dm-devel/2016-June/msg00311.html Reported-by: Dennis Yang <dennisyang@qnap.com> Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* block, drivers, fs: rename REQ_FLUSH to REQ_PREFLUSHMike Christie2016-06-071-4/+4
| | | | | | | | | | | | To avoid confusion between REQ_OP_FLUSH, which is handled by request_fn drivers, and upper layers requesting the block layer perform a flush sequence along with possibly a WRITE, this patch renames REQ_FLUSH to REQ_PREFLUSH. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* dm: use bio op accessorsMike Christie2016-06-071-7/+10
| | | | | | | | | Separate the op from the rq_flag_bits and have dm set/get the bio using bio_set_op_attrs/bio_op. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* block discard: use bio set op accessorMike Christie2016-06-071-1/+1
| | | | | | | | | | This converts the block issue discard helper and users to use the bio_set_op_attrs accessor and only pass in the operation flags like REQ_SEQURE. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* block/fs/drivers: remove rw argument from submit_bioMike Christie2016-06-071-1/+2
| | | | | | | | | | | | This has callers of submit_bio/submit_bio_wait set the bio->bi_rw instead of passing it in. This makes that use the same as generic_make_request and how we set the other bio fields. Signed-off-by: Mike Christie <mchristi@redhat.com> Fixed up fs/ext4/crypto.c Signed-off-by: Jens Axboe <axboe@fb.com>
* dm thin: unroll issue_discard() to create longer discard bio chainsJoe Thornber2016-05-131-37/+71
| | | | | | | | | There is little benefit to doing this but it does structure DM thinp's code to more cleanly use the __blkdev_issue_discard() interface -- particularly in passdown_double_checking_shared_status(). Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm thin: use __blkdev_issue_discard for async discard supportMike Snitzer2016-05-131-54/+16
| | | | | | | | | With commit 38f25255330 ("block: add __blkdev_issue_discard") DM thinp no longer needs to carry its own async discard method. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
* dm thin: remove __bio_inc_remaining() and switch to using bio_inc_remaining()Mike Snitzer2016-05-131-12/+1
| | | | | | | | | | | | | | | | DM thinp's use of bio_inc_remaining() is critical to ensure the original parent discard bio isn't completed before sub-discards have. DM thinp needs this due to the extra quiescing that occurs, via multiple DM thinp mappings, while processing large discards. As such DM thinp must build the async discard bio chain after some delay -- so bio_inc_remaining() is used to enable DM thinp to take a reference on the original parent discard bio for each mapping. This allows the immediate use of bio_endio() on that discard bio; but with the understanding that the actual completion won't occur until each of the sub-discards' per-mapping references are dropped. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com>
* dm thin: Remove return statement from void functionAmitoj Kaur Chawla2016-05-051-1/+1
| | | | | | | | | | | | | | | | | | | | | Return statement at the end of a void function is useless. The Coccinelle semantic patch used to make this change is as follows: //<smpl> @@ identifier f; expression e; @@ void f(...) { <... - return e; ...> } //</smpl> Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm thin: consistently return -ENOSPC if pool has run out of data spaceMike Snitzer2016-03-111-4/+17
| | | | | | | | | | | | | | | | | Commit 0a927c2f02 ("dm thin: return -ENOSPC when erroring retry list due to out of data space") was a step in the right direction but didn't go far enough. Add a new 'out_of_data_space' flag to 'struct pool' and set it if/when the pool runs of of data space. This fixes cell_error() and error_retry_list() to not blindly return -EIO. We cannot rely on the 'error_if_no_space' feature flag since it is transient (in that it can be reset once space is added, plus it only controls whether errors are issued, it doesn't reflect whether the pool is actually out of space). Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: rename target's per_bio_data_size to per_io_data_sizeMike Snitzer2016-02-221-1/+1
| | | | | | Request-based DM will also make use of per_bio_data_size. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm thin: bump thin and thin-pool target versionsMike Snitzer2016-01-061-2/+2
| | | | | | | | Commit 3d5f6733 ("dm thin metadata: speed up discard of partially mapped volumes"), or some other dm-thinp change during the Linux 4.5 development window, really should've bumped these target versions. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm thin: fix race condition when destroying thin pool workqueueNikolay Borisov2015-12-171-2/+2
| | | | | | | | | | | | | | | When a thin pool is being destroyed delayed work items are cancelled using cancel_delayed_work(), which doesn't guarantee that on return the delayed item isn't running. This can cause the work item to requeue itself on an already destroyed workqueue. Fix this by using cancel_delayed_work_sync() which guarantees that on return the work item is not running anymore. Fixes: 905e51b39a555 ("dm thin: commit outstanding data every second") Fixes: 85ad643b7e7e5 ("dm thin: add timeout to stop out-of-data-space mode holding IO forever") Signed-off-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
* dm thin: fix regression in advertised discard limitsMike Snitzer2015-11-231-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | When establishing a thin device's discard limits we cannot rely on the underlying thin-pool device's discard capabilities (which are inherited from the thin-pool's underlying data device) given that DM thin devices must provide discard support even when the thin-pool's underlying data device doesn't support discards. Users were exposed to this thin device discard limits regression if their thin-pool's underlying data device does _not_ support discards. This regression caused all upper-layers that called the blkdev_issue_discard() interface to not be able to issue discards to thin devices (because discard_granularity was 0). This regression wasn't caught earlier because the device-mapper-test-suite's extensive 'thin-provisioning' discard tests are only ever performed against thin-pool's with data devices that support discards. Fix is to have thin_io_hints() test the pool's 'discard_enabled' feature rather than inferring whether or not a thin device's discard support should be enabled by looking at the thin-pool's discard_granularity. Fixes: 216076705 ("dm thin: disable discard support for thin devices if pool's is disabled") Reported-by: Mike Gerber <mike@sprachgewalt.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 4.1+