summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/sdhci.c
Commit message (Collapse)AuthorAgeFilesLines
* mmc: sdhci: Fix max_seg_size for 64KiB PAGE_SIZEAdrian Hunter2024-07-111-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | blk_queue_max_segment_size() ensured: if (max_size < PAGE_SIZE) max_size = PAGE_SIZE; whereas: blk_validate_limits() makes it an error: if (WARN_ON_ONCE(lim->max_segment_size < PAGE_SIZE)) return -EINVAL; The change from one to the other, exposed sdhci which was setting maximum segment size too low in some circumstances. Fix the maximum segment size when it is too low. Fixes: 616f87661792 ("mmc: pass queue_limits to blk_mq_alloc_disk") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20240710180737.142504-1-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Do not lock spinlock around mmc_gpio_get_ro()Adrian Hunter2024-06-201-5/+0
| | | | | | | | | | | | | | | | | | | sdhci_check_ro() can call mmc_gpio_get_ro() while holding the sdhci host->lock spinlock. That would be a problem if the GPIO access done by mmc_gpio_get_ro() needed to sleep. However, host->lock is not needed anyway. The mmc core ensures that host operations do not race with each other, and asynchronous callbacks like the interrupt handler, software timeouts, completion work etc, cannot affect sdhci_check_ro(). So remove the locking. Fixes: 6d5cd068ee59 ("mmc: sdhci: use WP GPIO in sdhci_check_ro()") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240614080051.4005-3-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Do not invert write-protect twiceAdrian Hunter2024-06-201-7/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mmc_of_parse() reads device property "wp-inverted" and sets MMC_CAP2_RO_ACTIVE_HIGH if it is true. MMC_CAP2_RO_ACTIVE_HIGH is used to invert a write-protect (AKA read-only) GPIO value. sdhci_get_property() also reads "wp-inverted" and sets SDHCI_QUIRK_INVERTED_WRITE_PROTECT which is used to invert the write-protect value as well but also acts upon a value read out from the SDHCI_PRESENT_STATE register. Many drivers call both mmc_of_parse() and sdhci_get_property(), so that both MMC_CAP2_RO_ACTIVE_HIGH and SDHCI_QUIRK_INVERTED_WRITE_PROTECT will be set if the controller has device property "wp-inverted". Amend the logic in sdhci_check_ro() to allow for that possibility, so that the write-protect value is not inverted twice. Also do not invert the value if it is a negative error value. Note that callers treat an error the same as not-write-protected, so the result is functionally the same in that case. Also do not invert the value if sdhci host operation ->get_ro() is used. None of the users of that callback set SDHCI_QUIRK_INVERTED_WRITE_PROTECT directly or indirectly, but two do call mmc_gpio_get_ro(), so leave it to them to deal with that if they ever set SDHCI_QUIRK_INVERTED_WRITE_PROTECT in the future. Fixes: 6d5cd068ee59 ("mmc: sdhci: use WP GPIO in sdhci_check_ro()") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240614080051.4005-2-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Add support for "Tuning Error" interruptsAdrian Hunter2024-04-261-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most Bay Trail devices do not enable UHS modes for the external sdcard slot the Lenovo Yoga Tablet 2 830 / 1050 and Lenovo Yoga Tablet 2 Pro 1380 (8", 10" and 13") models however do enable this. Using a UHS cards in these tablets results in errors like this one: [ 225.272001] mmc2: Unexpected interrupt 0x04000000. [ 225.272024] mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== [ 225.272034] mmc2: sdhci: Sys addr: 0x0712c400 | Version: 0x0000b502 [ 225.272044] mmc2: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000007 [ 225.272054] mmc2: sdhci: Argument: 0x00000000 | Trn mode: 0x00000023 [ 225.272064] mmc2: sdhci: Present: 0x01e20002 | Host ctl: 0x00000016 [ 225.272073] mmc2: sdhci: Power: 0x0000000f | Blk gap: 0x00000000 [ 225.272082] mmc2: sdhci: Wake-up: 0x00000000 | Clock: 0x00000107 [ 225.272092] mmc2: sdhci: Timeout: 0x0000000e | Int stat: 0x00000001 [ 225.272101] mmc2: sdhci: Int enab: 0x03ff000b | Sig enab: 0x03ff000b [ 225.272110] mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000001 [ 225.272119] mmc2: sdhci: Caps: 0x076864b2 | Caps_1: 0x00000004 [ 225.272129] mmc2: sdhci: Cmd: 0x00000c1b | Max curr: 0x00000000 [ 225.272138] mmc2: sdhci: Resp[0]: 0x00000c00 | Resp[1]: 0x00000000 [ 225.272147] mmc2: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000900 [ 225.272155] mmc2: sdhci: Host ctl2: 0x0000000c [ 225.272164] mmc2: sdhci: ADMA Err: 0x00000003 | ADMA Ptr: 0x0712c200 [ 225.272172] mmc2: sdhci: ============================================ which results in IO errors leading to issues accessing the sdcard. 0x04000000 is a so-called "Tuning Error" which sofar the SDHCI driver does not support / enable. Modify the IRQ handler to process these. This fixes UHS microsd cards not working with these tablets. Link: https://lore.kernel.org/r/199bb4aa-c6b5-453e-be37-58bbf468800c@intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240410191639.526324-3-hdegoede@redhat.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: add __sdhci_execute_tuning() to headerDrew Fustini2023-12-071-1/+2
| | | | | | | | | | | | | | | | | Expose __sdhci_execute_tuning() so that it can be called from the mmc host controller drivers. In the sdhci-of-dwcmshc driver, sdhci_dwcmshc_th1520_ops sets platform_execute_tuning to th1520_execute_tuning(). That function has to manipulate phy registers before tuning can be performed. To avoid copying the code verbatim from __sdhci_execute_tuning() into th1520_execute_tuning(), make it possible for __sdhci_execute_tuning() to be called from sdhci-of-dwcmshc. Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Drew Fustini <dfustini@baylibre.com> Link: https://lore.kernel.org/r/20231109-th1520-mmc-v5-2-018bd039cf17@baylibre.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: fix DMA configure compatibility issue when 64bit DMA mode is used.Chevron Li2023-06-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Bayhub SD host has hardware limitation: 1.The upper 32bit address is inhibited to be written at SD Host Register [03E][13]=0 (32bits addressing) mode, is admitted to be written only at SD Host Register [03E][13]=1 (64bits addressing) mode. 2.Because of above item#1, need to configure SD Host Register [03E][13] to 1(64bits addressing mode) before set 64bit ADMA system address's higher 32bits SD Host Register [05F~05C] if 64 bits addressing mode is used. The hardware limitation is reasonable for below reasons: 1.Normal flow should set DMA working mode first, then do DMA-transfer-related configuration, such as system address. 2.The hardware limitation may avoid the software to configure wrong higher 32bit address at 32bits addressing mode although it is redundant. The change that set 32bits/64bits addressing mode before set ADMA address, has no side-effect to other host IPs for below reason: The setting order is reasonable and standard: DMA Mode setting first and then DMA address setting. It meets all DMA setting sequence. Signed-off-by: Chevron Li <chevron.li@bayhubtech.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230523111114.18124-1-chevron_li@126.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Remove SDHCI_QUIRK_MISSING_CAPSAdrian Hunter2023-01-231-3/+0
| | | | | | | | | | | Now that it is no longer used, remove SDHCI_QUIRK_MISSING_CAPS. Note, from now on, __sdhci_read_caps() should be used to provide missing capability flags. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20230113110011.129835-7-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci-tegra: Issue CMD and DAT resets togetherPrathamesh Shete2022-12-071-0/+5
| | | | | | | | | | | | | | | | | | In case of error condition to avoid system crash Tegra SDMMC controller requires CMD and DAT resets issued together. SDHCI controller FSM goes into bad state due to rapid SD card hot-plug event. Issuing reset on the CMD FSM before DATA FSM results in kernel panic, hence add support to issue CMD and DAT resets together. This is applicable to Tegra186 and later chips. Signed-off-by: Aniruddha TVS Rao <anrao@nvidia.com> Signed-off-by: Prathamesh Shete <pshete@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20221206165945.3551774-7-thierry.reding@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Remove unneeded semicolonzhang songyi2022-12-071-1/+1
| | | | | | | | | The semicolon after the "}" is unneeded. Signed-off-by: zhang songyi <zhang.songyi@zte.com.cn> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/202212021031575255977@zte.com.cn Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Avoid unnecessary ->set_clock()Adrian Hunter2022-12-071-23/+14
| | | | | | | | | | To avoid glitches on the clock line, the card clock is disabled when making timing changes. Do not do that separately for HISPD and UHS settings. Tested-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20221128133259.38305-4-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: Avoid open coding by using mmc_op_tuning()ChanWoo Lee2022-12-071-7/+2
| | | | | | | | | Replace code with the already defined function. No functional changes. Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20221124080031.14690-1-cw9316.lee@samsung.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Fix the SD tuning issue that the SDHCI_TRANSFER_MODE is cleared ↵Charl Liu2022-12-071-1/+1
| | | | | | | | | | | | incorrectly When cmd->opcode == MMC_SEND_TUNING_BLOCK, the SDHCI_TRANSFER_MODE should also be kept Signed-off-by: Charl Liu <charl.liu@bayhubtech.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20221111122314.307-1-charl.liu@bayhubtech.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Replace kmap_atomic() with kmap_local_page()Adrian Hunter2022-12-071-2/+2
| | | | | | | | | | | | | | kmap_local_page() is equivalent to kmap_atomic() except that it does not disable page faults or preemption. Where possible kmap_local_page() is preferred to kmap_atomic() - refer kernel highmem documentation. In this case, there is no need to disable page faults or preemption, so replace kmap_atomic() with kmap_local_page(), and, correspondingly, kunmap_atomic() with kunmap_local(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20221005101951.3165-4-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Remove local_irq_{save,restore}() around sg_miter_{next,stop}()Adrian Hunter2022-12-071-10/+0
| | | | | | | | | | | | | | | | | sg_miter_next() using an sg_mapping_iter with flag SG_MITER_ATOMIC uses kmap_atomic() to map pages. A long time ago the kmap_atomic API required a slot to be provided which risked the possibility that other code might use the same slot at the same time. Disabling interrupts prevented the possibility of an interrupt handler doing that. However, that went away with commit 3e4d3af501cc ("mm: stack based kmap_atomic()"). Remove local_irq_{save,restore}() around sg_miter_{next,stop}(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20221005101951.3165-3-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Remove local_irq_{save,restore}() around k[un]map_atomic()Adrian Hunter2022-12-071-10/+6
| | | | | | | | | | | | | | | | | | A long time ago the kmap_atomic API required a slot to be provided which risked the possibility that other code might use the same slot at the same time. Disabling interrupts prevented the possibility of an interrupt handler doing that. However, that went away with commit 3e4d3af501cc ("mm: stack based kmap_atomic()"). When the second argument to kmap_atomic was removed by commit 482fce997e14 ("mmc: remove the second argument of k[un]map_atomic()"), local_irq_{save,restore}() should have been removed also. Remove it now. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20221005101951.3165-2-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Fix voltage switch delayAdrian Hunter2022-11-291-7/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 20b92a30b561 ("mmc: sdhci: update signal voltage switch code") removed voltage switch delays from sdhci because mmc core had been enhanced to support them. However that assumed that sdhci_set_ios() did a single clock change, which it did not, and so the delays in mmc core, which should have come after the first clock change, were not effective. Fix by avoiding re-configuring UHS and preset settings when the clock is turning on and the settings have not changed. That then also avoids the associated clock changes, so that then sdhci_set_ios() does a single clock change when voltage switching, and the mmc core delays become effective. To do that has meant keeping track of driver strength (host->drv_type), and cases of reinitialization (host->reinit_uhs). Note also, the 'turning_on_clk' restriction should not be necessary but is done to minimize the impact of the change on stable kernels. Fixes: 20b92a30b561 ("mmc: sdhci: update signal voltage switch code") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20221128133259.38305-2-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Centralize CMD and DATA reset handlingAdrian Hunter2022-09-281-13/+39
| | | | | | | | | | Centralize CMD and DATA reset handling so that is more obvious how reset is handled in different situations. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20220926192022.85660-5-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Get rid of SDHCI_QUIRK_RESET_CMD_DATA_ON_IOSAdrian Hunter2022-09-281-8/+0
| | | | | | | | | | | | | SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS is used by only ENE controllers but can be replaced by driver code. Amend the ENE code to hook the ->set_ios() mmc host operation and do the reset there. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20220926192022.85660-4-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Remove misleading comment about resetsAdrian Hunter2022-09-281-4/+0
| | | | | | | | | | | | In SDHCI specification section 3.10.1 Error Interrupt Recovery, the flow chart shows Software Reset for CMD separately and before Software Reset for DAT, so the comment "Spec says we should do both at the same time" is not correct. Remove it. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20220926192022.85660-3-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Separate out sdhci_reset_for_all()Adrian Hunter2022-09-281-8/+12
| | | | | | | | | | Tidy sdhci_do_reset() slightly by separating out sdhci_reset_for_all() which removes the need to test the mask in sdhci_do_reset(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20220926192022.85660-2-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Fix host->cmd is nullWenchao Chen2022-09-141-2/+2
| | | | | | | | | | | | When data crc occurs, the kernel will panic because host->cmd is null. Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com> Fixes: efe8f5c9b5e1 ("mmc: sdhci: Capture eMMC and SD card errors") Cc: stable@vger.kernel.org Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20220907035847.13783-1-wenchao.chen666@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Capture eMMC and SD card errorsShaik Sajida Bhanu2022-07-121-15/+44
| | | | | | | | | | | | | Add changes to capture eMMC and SD card errors. This is useful for debug and testing. Signed-off-by: Liangliang Lu <quic_luliang@quicinc.com> Signed-off-by: Sayali Lokhande <quic_sayalil@quicinc.com> Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com> Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@quicinc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1653674036-21829-3-git-send-email-quic_c_sbhanu@quicinc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: improve API to make clear hw_reset callback is for cardsWolfram Sang2022-04-261-1/+1
| | | | | | | | | | | To make it unambiguous that the hw_reset callback is for cards and not for controllers, we add 'card' to the callback name and convert all users in one go. We keep the argument as mmc_host, though, because the callback is used very early when mmc_card is not yet populated. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220408080045.6497-4-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Fix ADMA for PAGE_SIZE >= 64KiBAdrian Hunter2021-11-171-3/+18
| | | | | | | | | | | | | The block layer forces a minimum segment size of PAGE_SIZE, so a segment can be too big for the ADMA table, if PAGE_SIZE >= 64KiB. Fix by writing multiple descriptors, noting that the ADMA table is sized for 4KiB chunks anyway, so it will be big enough. Reported-and-tested-by: Bough Chen <haibo.chen@nxp.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211115082345.802238-1-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Deduplicate sdhci_get_cd_nogpio()Andy Shevchenko2021-10-191-0/+19
| | | | | | | | | | The analogue of the sdhci_get_cd_nogpio() is used in the sdhci-pci-core and sdhci-acpi modules. Deduplicate it by moving to sdhci and exporting. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20211014132613.27861-2-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* Merge branch 'fixes' into nextUlf Hansson2021-10-121-0/+6
|\
| * mmc: sdhci: Map more voltage level to SDHCI_POWER_330Shawn Guo2021-10-121-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Thundercomm TurboX CM2290, the eMMC OCR reports vdd = 23 (3.5 ~ 3.6 V), which is being treated as an invalid value by sdhci_set_power_noreg(). And thus eMMC is totally broken on the platform. [ 1.436599] ------------[ cut here ]------------ [ 1.436606] mmc0: Invalid vdd 0x17 [ 1.436640] WARNING: CPU: 2 PID: 69 at drivers/mmc/host/sdhci.c:2048 sdhci_set_power_noreg+0x168/0x2b4 [ 1.436655] Modules linked in: [ 1.436662] CPU: 2 PID: 69 Comm: kworker/u8:1 Tainted: G W 5.15.0-rc1+ #137 [ 1.436669] Hardware name: Thundercomm TurboX CM2290 (DT) [ 1.436674] Workqueue: events_unbound async_run_entry_fn [ 1.436685] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1.436692] pc : sdhci_set_power_noreg+0x168/0x2b4 [ 1.436698] lr : sdhci_set_power_noreg+0x168/0x2b4 [ 1.436703] sp : ffff800010803a60 [ 1.436705] x29: ffff800010803a60 x28: ffff6a9102465f00 x27: ffff6a9101720a70 [ 1.436715] x26: ffff6a91014de1c0 x25: ffff6a91014de010 x24: ffff6a91016af280 [ 1.436724] x23: ffffaf7b1b276640 x22: 0000000000000000 x21: ffff6a9101720000 [ 1.436733] x20: ffff6a9101720370 x19: ffff6a9101720580 x18: 0000000000000020 [ 1.436743] x17: 0000000000000000 x16: 0000000000000004 x15: ffffffffffffffff [ 1.436751] x14: 0000000000000000 x13: 00000000fffffffd x12: ffffaf7b1b84b0bc [ 1.436760] x11: ffffaf7b1b720d10 x10: 000000000000000a x9 : ffff800010803a60 [ 1.436769] x8 : 000000000000000a x7 : 000000000000000f x6 : 00000000fffff159 [ 1.436778] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000ffffffff [ 1.436787] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6a9101718d80 [ 1.436797] Call trace: [ 1.436800] sdhci_set_power_noreg+0x168/0x2b4 [ 1.436805] sdhci_set_ios+0xa0/0x7fc [ 1.436811] mmc_power_up.part.0+0xc4/0x164 [ 1.436818] mmc_start_host+0xa0/0xb0 [ 1.436824] mmc_add_host+0x60/0x90 [ 1.436830] __sdhci_add_host+0x174/0x330 [ 1.436836] sdhci_msm_probe+0x7c0/0x920 [ 1.436842] platform_probe+0x68/0xe0 [ 1.436850] really_probe.part.0+0x9c/0x31c [ 1.436857] __driver_probe_device+0x98/0x144 [ 1.436863] driver_probe_device+0xc8/0x15c [ 1.436869] __device_attach_driver+0xb4/0x120 [ 1.436875] bus_for_each_drv+0x78/0xd0 [ 1.436881] __device_attach_async_helper+0xac/0xd0 [ 1.436888] async_run_entry_fn+0x34/0x110 [ 1.436895] process_one_work+0x1d0/0x354 [ 1.436903] worker_thread+0x13c/0x470 [ 1.436910] kthread+0x150/0x160 [ 1.436915] ret_from_fork+0x10/0x20 [ 1.436923] ---[ end trace fcfac44cb045c3a8 ]--- Fix the issue by mapping MMC_VDD_35_36 (and MMC_VDD_34_35) to SDHCI_POWER_330 as well. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211004024935.15326-1-shawn.guo@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: sdhci: Return true only when timeout exceeds capacity of the HW timerBean Huo2021-10-121-12/+9
| | | | | | | | | | | | | | | | | | | | | | Clean up sdhci_calc_timeout() a bit, and let it set too_big to be true only when the timeout value required by the eMMC device exceeds the capability of the host hardware timer. Signed-off-by: Bean Huo <beanhuo@micron.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20210917172727.26834-2-huobean@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | mmc: sdhci: Change the code to check auto_cmd23ChanWoo Lee2021-10-121-1/+1
|/ | | | | | | | | | | It is replaced with a function that is already declared. //[1/5] mmc: sdhci: Add helpers for the auto-CMD23 flag //20200412090349.1607-2-adrian.hunter@intel.com Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20210825093345.14706-1-cw9316.lee@samsung.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Correct the tuning command handle for PIO modeHaibo Chen2021-08-241-2/+8
| | | | | | | | | | | | | | | | If sdhci use PIO mode, and use mmc_send_tuning() to send the tuning command, system will stuck because of the storm irq of sdhci. For PIO mode, use mmc_send_tuning(), it will trigger buffer_read_ready interrupt and data transfer complete interrupt. In current code logic, it will directly return in sdhci_data_irq, can not call the sdhci_transfer_pio(). So the buffer_read_ready interrupt storm happen. So for standard tuning method, need to exclude this case. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1628858041-1911-1-git-send-email-haibo.chen@nxp.com [Ulf: Dropped redundant parenthesis in an expression] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Fix issue with uninitialized dma_slave_configTony Lindgren2021-08-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Depending on the DMA driver being used, the struct dma_slave_config may need to be initialized to zero for the unused data. For example, we have three DMA drivers using src_port_window_size and dst_port_window_size. If these are left uninitialized, it can cause DMA failures at least if external TI SDMA is ever configured for sdhci. For other external DMA cases, this is probably not currently an issue but is still good to fix though. Fixes: 18e762e3b7a7 ("mmc: sdhci: add support for using external DMA devices") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Chunyan Zhang <zhang.chunyan@linaro.org> Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Cc: Vinod Koul <vkoul@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20210810081644.19353-1-tony@atomide.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Introduce max_timeout_count variable in sdhci_hostSarthak Garg2021-08-241-7/+9
| | | | | | | | | | | | | Introduce max_timeout_count variable in the sdhci_host structure and use in timeout calculation. By default its set to 0xE (max timeout register value as per SDHC spec). But at the same time vendors drivers can update it if they support different max timeout register value than 0xE. Signed-off-by: Sarthak Garg <sartgarg@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1628232901-30897-2-git-send-email-sartgarg@codeaurora.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Fix warning message when accessing RPMB in HS400 modeAl Cooper2021-07-021-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | When an eMMC device is being run in HS400 mode, any access to the RPMB device will cause the error message "mmc1: Invalid UHS-I mode selected". This happens as a result of tuning being disabled before RPMB access and then re-enabled after the RPMB access is complete. When tuning is re-enabled, the system has to switch from HS400 to HS200 to do the tuning and then back to HS400. As part of sequence to switch from HS400 to HS200 the system is temporarily put into HS mode. When switching to HS mode, sdhci_get_preset_value() is called and does not have support for HS mode and prints the warning message and returns the preset for SDR12. The fix is to add support for MMC and SD HS modes to sdhci_get_preset_value(). This can be reproduced on any system running eMMC in HS400 mode (not HS400ES) by using the "mmc" utility to run the following command: "mmc rpmb read-counter /dev/mmcblk0rpmb". Signed-off-by: Al Cooper <alcooperx@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: 52983382c74f ("mmc: sdhci: enhance preset value function") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210624163045.33651-1-alcooperx@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Clear unused bounce buffer at DMA mmap error pathTakashi Iwai2021-06-291-1/+5
| | | | | | | | | | | | | | | | When DMA-mapping of the bounce buffer fails, the driver tries to fall back, but it leaves the allocated host->bounce_buffer although its size is zero. Later on, the driver checks the use of bounce buffer with host->bounce_buffer pointer, and it tries to use the buffer incorrectly, resulting in Oops. This patch clears the release the unused buffer and clears the bounce_buffer pointer for addressing the problem. Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20210611101948.18972-1-tiwai@suse.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: Improve function name when aborting a tuning cmdWolfram Sang2021-06-141-1/+1
| | | | | | | | | | | | 'mmc_abort_tuning()' made me think tuning gets completely aborted. However, it sends only a STOP cmd to cancel the current tuning cmd. Tuning process may still continue after that. So, rename the function to 'mmc_send_abort_tuning()' to better reflect all this. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20210608180620.40059-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: replace mmc->parent with mmc_dev() for consistencyJisheng Zhang2021-03-301-12/+12
| | | | | | | | | | | As pointed out by Ulf, "both "mmc->parent" and mmc_dev(mmc) are being used in the entire c-file". Convert all the mmc->parent usage in all sdhci host driver to mmc_dev() for consistency. Suggested-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/20210324155013.1e5faa3c@xhacker.debian Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Use "mmc" directly rather than "host->mmc"Jisheng Zhang2021-03-301-17/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clean up the code to use the "mmc" directly instead of "host->mmc". If the code sits in hot code path, this clean up also brings trvial performance improvement. Take the sdhci_post_req() for example: before the patch: ... 8d0: a9be7bfd stp x29, x30, [sp, #-32]! 8d4: 910003fd mov x29, sp 8d8: f9000bf3 str x19, [sp, #16] 8dc: f9400833 ldr x19, [x1, #16] 8e0: b9404261 ldr w1, [x19, #64] 8e4: 34000161 cbz w1, 910 <sdhci_post_req+0x50> 8e8: f9424400 ldr x0, [x0, #1160] 8ec: d2800004 mov x4, #0x0 // #0 8f0: b9401a61 ldr w1, [x19, #24] 8f4: b9403262 ldr w2, [x19, #48] 8f8: f9400000 ldr x0, [x0] 8fc: f278003f tst x1, #0x100 900: f9401e61 ldr x1, [x19, #56] 904: 1a9f17e3 cset w3, eq // eq = none 908: 11000463 add w3, w3, #0x1 90c: 94000000 bl 0 <dma_unmap_sg_attrs> ... After the patch: ... 8d0: a9be7bfd stp x29, x30, [sp, #-32]! 8d4: 910003fd mov x29, sp 8d8: f9000bf3 str x19, [sp, #16] 8dc: f9400833 ldr x19, [x1, #16] 8e0: b9404261 ldr w1, [x19, #64] 8e4: 34000141 cbz w1, 90c <sdhci_post_req+0x4c> 8e8: b9401a61 ldr w1, [x19, #24] 8ec: d2800004 mov x4, #0x0 // #0 8f0: b9403262 ldr w2, [x19, #48] 8f4: f9400000 ldr x0, [x0] 8f8: f278003f tst x1, #0x100 8fc: f9401e61 ldr x1, [x19, #56] 900: 1a9f17e3 cset w3, eq // eq = none 904: 11000463 add w3, w3, #0x1 908: 94000000 bl 0 <dma_unmap_sg_attrs> ... We saved one ldr instruction: "ldr x0, [x0, #1160]" Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20210311174046.597d1951@xhacker.debian Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Check for reset prior to DMA address unmapPradeep P V K2021-03-301-29/+31
| | | | | | | | | | | | | | | | | | | | | | For data read commands, SDHC may initiate data transfers even before it completely process the command response. In case command itself fails, driver un-maps the memory associated with data transfer but this memory can still be accessed by SDHC for the already initiated data transfer. This scenario can lead to un-mapped memory access error. To avoid this scenario, reset SDHC (when command fails) prior to un-mapping memory. Resetting SDHC ensures that all in-flight data transfers are either aborted or completed. So we don't run into this scenario. Swap the reset, un-map steps sequence in sdhci_request_done(). Suggested-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Signed-off-by: Pradeep P V K <pragalla@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1614760331-43499-1-git-send-email-pragalla@qti.qualcomm.com Cc: stable@vger.kernel.org # v4.9+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* sdhci: stop poking into swiotlb internalsChristoph Hellwig2021-02-201-7/+2
| | | | | | | | Use the proper API to query the max mapping size instead of guessing it based on swiotlb internals. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* mmc: sdhci: Use more concise device_property_read_u64Jeremy Linton2020-12-041-4/+4
| | | | | | | | | | Since we only need a single u64 the _array form is unnecessarily. Use device_property_read_u64 instead. Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20201125033630.603863-1-jeremy.linton@arm.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Update firmware interface APIJeremy Linton2020-11-241-4/+4
| | | | | | | | | | | | | The device_* calls were added a few years ago to abstract DT/ACPI/fwnode firmware interfaces. Lets convert the two sdhci caps fields to use the generic calls rather than the OF specific ones. This has the side effect of allowing ACPI based devices to quirk themselves when the caps field is broken. Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Link: https://lore.kernel.org/r/20201120233831.447365-1-jeremy.linton@arm.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* mmc: sdhci: Use Auto CMD Auto Select only when v4_mode is trueJisheng Zhang2020-10-151-2/+4
| | | | | | | | | | | | | | | | | | | | | | sdhci-of-dwcmshc meets an eMMC read performance regression with below command after commit 427b6514d095 ("mmc: sdhci: Add Auto CMD Auto Select support"): dd if=/dev/mmcblk0 of=/dev/null bs=8192 count=100000 Before the commit, the above command gives 120MB/s After the commit, the above command gives 51.3 MB/s So it looks like sdhci-of-dwcmshc expects Version 4 Mode for Auto CMD Auto Select. Fix the performance degradation by ensuring v4_mode is true to use Auto CMD Auto Select. Fixes: 427b6514d095 ("mmc: sdhci: Add Auto CMD Auto Select support") Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201015174115.4cf2c19a@xhacker.debian Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva2020-08-231-1/+1
| | | | | | | | | | Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
* Merge tag 'mmc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds2020-08-051-8/+16
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MMC updates from Ulf Hansson: "MMC core: - Add a new host cap bit and a corresponding DT property, to support power cycling of the card by FW at system suspend/resume. - Fix clock rate setting for SDIO in SDR12/SDR25 speed-mode - Fix switch to 1/4-bit mode at system suspend/resume for SD-combo cards - Convert the mmc-pwrseq DT bindings to the json-schema - Always allow the card detect uevent to be consumed by userspace MMC host controllers: - Convert a few DT bindings to the json-schema - mtk-sd: - Add support for command queue through cqhci - Add support for the MT6779 variant - renesas_sdhi_internal_dmac: - Fix dma unmapping in the error path - sdhci_am654: - Add support for the AM65x PG2.0 variant - Extend support for phys/clocks - sdhci-cadence: - Drop incorrect HW tuning for SD mode - sdhci-msm: - Add support for interconnect bandwidth scaling - Enable internal voltage control - Enable low power state for pinctrls - sdhci-of-at91: - Ludovic Desroches handovers maintenance to Eugen Hristev - sdhci-pci-gli: - Improve clock handling for GL975x - sdhci-pci-o2micro: - Add HW tuning for SDR104 mode - Fix support for O2 host controller Seabird1" * tag 'mmc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (66 commits) mmc: mediatek: make function msdc_cqe_disable() static MAINTAINERS: mmc: sdhci-of-at91: handover maintenance to Eugen Hristev dt-bindings: mmc: mediatek: Add document for mt6779 mmc: mediatek: command queue support mmc: mediatek: refine msdc timeout api mmc: mediatek: add MT6779 MMC driver support mmc: sdhci-pci-o2micro: Add HW tuning for SDR104 mode mmc: sdhci-pci-o2micro: Bug fix for O2 host controller Seabird1 mmc: via-sdmmc: use generic power management memstick: jmb38x_ms: use generic power management mmc: sdhci-cadence: do not use hardware tuning for SD mode mmc: sdhci-pci-gli: Set SDR104's clock to 205MHz and enable SSC for GL975x mmc: cqhci: Fix a print format for the task descriptor mmc: sdhci-of-arasan: fix timings allocation code mmc: sdhci: Fix a potential uninitialized variable dt-bindings: mmc: renesas,sdhi: convert to YAML dt-bindings: mmc: convert arasan sdhci bindings to yaml mmc: sdhci: Fix potential null pointer access while accessing vqmmc mmc: core: Add MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND dt-bindings: mmc: Add full-pwr-cycle-in-suspend property ...
| * mmc: sdhci: Fix a potential uninitialized variableDan Carpenter2020-07-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Smatch complains that "ret" can be used without being initialized. drivers/mmc/host/sdhci.c 4383 if (!IS_ERR(mmc->supply.vqmmc)) { 4384 if (enable_vqmmc) { ^^^^^^^^^^^^ 4385 ret = regulator_enable(mmc->supply.vqmmc); ^^^^^ 4386 host->sdhci_core_to_disable_vqmmc = !ret; 4387 } "ret" is only initialized when "enable_vqmmc" is true. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200714141410.GB314989@mwanda Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: sdhci: Fix potential null pointer access while accessing vqmmcVeerabhadrarao Badiganti2020-07-131-5/+7
| | | | | | | | | | | | | | | | | | Don't access vqmmc regulator handler, if it's already invalidated. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Link: https://lore.kernel.org/r/1594300408-17658-1-git-send-email-vbadigan@codeaurora.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
| * mmc: sdhci: Allow platform controlled voltage switchingVijay Viswanath2020-07-131-13/+19
| | | | | | | | | | | | | | | | | | | | | | | | If vendor platform drivers are controlling whole logic of voltage switching, then sdhci driver no need control vqmmc regulator. So skip enabling/disable vqmmc from SDHC driver. Signed-off-by: Vijay Viswanath <vviswana@codeaurora.org> Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1592919288-1020-2-git-send-email-vbadigan@codeaurora.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | treewide: Remove uninitialized_var() usageKees Cook2020-07-161-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org>
* Merge branch 'fixes' into nextUlf Hansson2020-05-281-3/+6
|\
| * mmc: sdhci: Fix SDHCI_QUIRK_BROKEN_CQEAdrian Hunter2020-05-181-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | Previous to commit 511ce378e16f07 ("mmc: Add MMC host software queue support"), removing MMC_CAP2_CQE was enough to disable command queuing, but now the cqe_ops must also be NULL otherwise ->cqe_enable() will be called. Fix SDHCI_QUIRK_BROKEN_CQE to do that. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: 511ce378e16f07 ("mmc: Add MMC host software queue support") Link: https://lore.kernel.org/r/20200518120939.1399-1-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.46.0) at 2025-04-24 22:57:42 +0000