summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/nand_base.c
Commit message (Collapse)AuthorAgeFilesLines
* mtd: nand: support alternate BB marker locations on MLCKevin Cernekee2010-05-141-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a slightly modified version of a patch submitted last year by Reuben Dowle <reuben.dowle@navico.com>. His original comments follow: This patch adds support for some MLC NAND flashes that place the BB marker in the LAST page of the bad block rather than the FIRST page used for SLC NAND and other types of MLC nand. Lifted from Samsung datasheet for K9LG8G08U0A (1Gbyte MLC NAND): " Identifying Initial Invalid Block(s) All device locations are erased(FFh) except locations where the initial invalid block(s) information is written prior to shipping. The initial invalid block(s) status is defined by the 1st byte in the spare area. Samsung makes sure that the last page of every initial invalid block has non-FFh data at the column address of 2,048. ... " As far as I can tell, this is the same for all Samsung MLC nand, and in fact the samsung bsp for the processor used in our project (s3c6410) actually contained a hack similar to this patch but less portable to enable use of their NAND parts. I discovered this problem when trying to use a Micron NAND which does not used this layout - I wish samsung would put their stuff in main-line to avoid this type of problem. Currently this patch causes all MLC nand with manufacturer codes from Samsung and ST(Numonyx) to use this alternative location, since these are the manufactures that I know of that use this layout. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: extend NAND flash detection to new MLC chipsKevin Cernekee2010-05-141-20/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some of the newer MLC devices have a 6-byte ID sequence in which several field definitions differ from older chips in a manner that is not backward compatible. For instance: Samsung K9GAG08U0M (5-byte sequence): ec d5 14 b6 74 4th byte, bits 1:0 encode the page size: 0=1KiB, 1=2KiB, 2=4KiB, 3=8KiB 4th byte, bits 5:4 encode the block size: 0=64KiB, 1=128KiB, ... 4th byte, bit 6 encodes the OOB size: 0=8B/512B, 1=16B/512B Samsung K9GAG08U0D (6-byte sequence): ec d5 94 29 34 41 4th byte, bits 1:0 encode the page size: 0=2KiB, 1=4KiB, 3=8KiB, 4=rsvd 4th byte, bits 7;5:4 encode the block size: 0=128KiB, 1=256KiB, ... 4th byte, bits 6;3:2 encode the OOB size: 1=128B/page, 2=218B/page This patch uses the new 6-byte scheme if the following conditions are all true: 1) The ID code wraps around after exactly 6 bytes 2) Manufacturer is Samsung 3) 6th byte is zero The patch also extends the maximum OOB size from 128B to 256B. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: Workaround wrong write protect status on some xD cardsMaxim Levitsky2010-02-261-1/+7
| | | | | Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: Allow caller to pass alternative ID table to nand_scan_ident()David Woodhouse2010-02-261-14/+15
| | | | Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: add ->badblockbits for minimum number of set bits in bad block byteMaxim Levitsky2010-02-261-4/+9
| | | | | | | | This can be used to protect against bitflips in that field, but now mostly for smartmedia. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: make reads using MTD_OOB_RAW affect only ECC validationMaxim Levitsky2010-02-261-12/+7
| | | | | | | | | | | | | | | This changes the behavier of MTD_OOB_RAW. It used to read both OOB and data to the data buffer, however you would still need to specify the dummy oob buffer. This is only used in one place, but makes it hard to read data+oob without ECC test, thus I removed that behavier, and fixed the user. Now MTD_OOB_RAW behaves just like MTD_OOB_PLACE, but doesn't do ECC validation Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: cleanup the nand_do_write_opsMaxim Levitsky2010-02-261-7/+17
| | | | | | | | | | | | | nand_do_write_ops was broken in regard to writing several pages, each with its own oob. Although nand_do_write_ops intends to allow such mode, it fails do do so Probably this was never tested. Also add missing checks for attempts to write at illegal offsets. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: make MTD_OOB_PLACE work correctly.Maxim Levitsky2010-02-261-1/+5
| | | | | | | | | MTD_OOB_PLACE is supposed to read/write the raw oob data similiar to the MTD_OOB_RAW however due to a bug, currently it is not possible to read more data that is specified by the oob 'free' regions. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: make suspend work if device is accessed by kernel threads.Maxim Levitsky2010-02-261-3/+0
| | | | | | | | | | | | Since all userspace threads are frozen at the time the nand_suspend is called, they aren't inside any nand function. We don't call try_to_freeze in nand ether. Thus the only user that can be inside the nand functions is an non freezeable kernel thread. Thus we can safely wait for it to finish. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: add lock/unlock routinesVimal Singh2010-02-261-0/+164
| | | | | | | | | Add nand lock / unlock routines. At least 'micron' parts support this. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: create a helper verification functionVimal Singh2010-02-261-18/+30
| | | | | | | | | | | | ... verification for 'nand_erase_nand' These checks are expected to be used by 'nand_lock' and 'nand_unlock' routines too. As all these three are block aligned operations. So, creating a helper function for this makes sense. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: fix multi-chip suspend problemLi Yang2009-11-301-2/+8
| | | | | | | | | | | | | | | Symptom: device_suspend(): mtd_cls_suspend+0x0/0x58 returns -11 PM: Device mtd14 failed to suspend: error -11 PM: Some devices failed to suspend This patch enables other chips to be suspended if the active chip of the controller has been suspended. Signed-off-by: Jin Qing <b24347@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: add option to quieten off the no device found messgaeBen Dooks2009-11-301-1/+2
| | | | | | | | | | | | | | | | Add NAND_SCAN_SILENT_NODEV to chip->options to the user-worrying messages 'No NAND device found!!!'. This message often worries users (was three exclamation marks really necessary?) and especially in systems such as the Simtec Osiris where there may be optional NAND devices which are not known until probe time. Revised version of the original NAND_PROBE_SPECULATIVE patch after comments by Artem Bityutskiy about adding a whole new call. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: Add panic_write for NAND flashesSimon Kagstrom2009-11-301-8/+120
| | | | | | | | | | | | | This is a quick and dirty patch to add panic_write for NAND flashes. The patch seems to work OK on my CRIS board running a 2.6.26 kernel with a ID: 0x20, Chip ID: 0xf1 (ST Micro NAND 128MiB 3,3V 8-bit), and also on a OpenRD base (Marvell Kirkwood) board with a Toshiba NAND 512MiB 3,3V 8-bit flash with 2.6.32-pre1. Signed-off-by: Edgar E. Iglesias <edgar@axis.com> Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: fix htmldocs warningsJaswinder Singh Rajput2009-09-241-0/+6
| | | | | | | | | | | | | | | Fixed following htmldocs warnings: DOCPROC Documentation/DocBook/mtdnand.xml Warning(drivers/mtd/nand/nand_base.c:769): No description found for parameter 'page' Warning(drivers/mtd/nand/nand_base.c:785): No description found for parameter 'page' Warning(drivers/mtd/nand/nand_base.c:824): No description found for parameter 'page' Warning(drivers/mtd/nand/nand_base.c:947): No description found for parameter 'page' Warning(drivers/mtd/nand/nand_base.c:996): No description found for parameter 'page' Warning(drivers/mtd/nand/nand_base.c:1040): No description found for parameter 'page' Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: add new ECC mode - ECC_HW_OOB_FIRSTSneha Narnakaje2009-09-191-1/+60
| | | | | | | | | | | | | | | | | | This patch adds the new mode NAND_ECC_HW_OOB_FIRST in the nand code to support 4-bit ECC on TI DaVinci devices with large page (up to 2KiB) NAND chips. This ECC mode is similar to NAND_ECC_HW, with the exception of read_page API that first reads the OOB area, reads the data in chunks, feeds the ECC from OOB area to the ECC hw engine and perform any correction on the data as per the ECC status reported by the engine. "ECC_HW_OOB_FIRST" name suggested by Thomas Gleixner Reviewed-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Sneha Narnakaje <nsnehaprabha@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: add "page" parameter to all read_page/read_page_raw APIsSneha Narnakaje2009-09-191-8/+10
| | | | | | | | | | | | | | This patch adds a new "page" parameter to all NAND read_page/read_page_raw APIs. The read_page API for the new mode ECC_HW_OOB_FIRST requires the page information to send the READOOB command and read the OOB area before the data area. Reviewed-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Sneha Narnakaje <nsnehaprabha@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand_base: allow drivers to choose ECC block sizeSingh, Vimal2009-09-041-1/+2
| | | | | | | | | This patch allows core driver to choose ECC block size in sw ecc case. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand_base: use __func__ instead of typing namesvimal singh2009-09-041-40/+42
| | | | | | | | | | | Correcting debug prints by removing function names from print messages and using '__func__' macro instead. Function names were wrong in few places. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: remove repeated comment, fix spellingvimal singh2009-09-041-2/+1
| | | | | | Singed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* mtd: nand: don't walk past end of oobfree[]David Brownell2009-06-051-1/+2
| | | | | | | | | | | | Resolve issue noted by Sneha: when computing oobavail from the list of free areas in the OOB, don't assume there will always be an unused slot at the end. With ECC_HW_SYNDROME and 4KiB page chips, it's fairly likely there *won't* be one. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: "Narnakaje, Snehaprabha" <nsnehaprabha@ti.com>" Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* Merge git://git.infradead.org/mtd-2.6Linus Torvalds2009-04-061-8/+117
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/mtd-2.6: (53 commits) [MTD] struct device - replace bus_id with dev_name(), dev_set_name() [MTD] [NOR] Fixup for Numonyx M29W128 chips [MTD] mtdpart: Make ecc_stats more realistic. powerpc/85xx: TQM8548: Update DTS file for multi-chip support powerpc: NAND: FSL UPM: document new bindings [MTD] [NAND] FSL-UPM: Add wait flags to support board/chip specific delays [MTD] [NAND] FSL-UPM: add multi chip support [MTD] [NOR] Add device parent info to physmap_of [MTD] [NAND] Add support for NAND on the Socrates board [MTD] [NAND] Add support for 4KiB pages. [MTD] sysfs support should not depend on CONFIG_PROC_FS [MTD] [NAND] Add parent info for CAFÉ controller [MTD] support driver model updates [MTD] driver model updates (part 2) [MTD] driver model updates [MTD] [NAND] move gen_nand's probe function to .devinit.text [MTD] [MAPS] move sa1100 flash's probe function to .devinit.text [MTD] fix use after free in register_mtd_blktrans [MTD] [MAPS] Drop now unused sharpsl-flash map [MTD] ofpart: Check name property to determine partition nodes. ... Manually fix trivial conflict in drivers/mtd/maps/Makefile
| * [MTD] [NAND] Add support for 4KiB pages.Thomas Gleixner2009-04-061-0/+18
| | | | | | | | | | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * [MTD] [NAND] fix broken debug messagesDavid Brownell2009-03-201-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix incorrect debug messages (*write* not read); someone committed some cut'n'paste bugs.  There might be more, I only noticed these since I was looking for nand_read usage and landed in some very wrong functions. IMO all MTD debugging message framework is goofed, anyway. It uses "DEBUG" in a way that's incompatible with usage most everywhere else in the kernel, and which prevents normal pr_dbg() and dev_dbg() calls from working right. [True. It predates those by a long way, and should probably be updated to use them. dwmw2] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * [MTD] [NAND] fix "raw" reads with ECC syndrome layoutsDavid Brownell2009-03-201-4/+95
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The syndrome based page read/write routines store ECC, and possibly other "OOB" data, right after each chunk of ECC'd data. With ECC chunk size of 512 bytes and a large page (2KiB) NAND, the layout is: data-0 OOB-0 data-1 OOB-1 data-2 OOB-2 data-3 OOB-3 OOB-leftover Where OOBx is (prepad, ECC, postpad). However, the current "raw" routines use a traditional layout -- data OOB, disregarding the prepad and postpad values -- so when they're used with that type of ECC hardware, those calls mix up the data and OOB. Which means, in particular, that bad block tables won't be found on startup, with data corruption and related chaos ensuing. The current syndrome-based drivers in mainline all seem to use one chunk per page; presumably they haven't noticed such bugs. Fix this, by adding read/write page_raw_syndrome() routines as siblings of the existing non-raw routines; "raw" just means to bypass the ECC computations, not change data and OOB layout. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | module: remove module_text_address()Rusty Russell2009-03-311-2/+2
|/ | | | | | | | | | | | | Impact: Replace and remove risky (non-EXPORTed) API module_text_address() returns a pointer to the module, which given locking improvements in module.c, is useless except to test for NULL: 1) If the module can't go away, use __module_text_address. 2) Otherwise, just use is_module_text_address(). Cc: linux-mtd@lists.infradead.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* [MTD] [NAND] remove excess kernel-doc notationRandy Dunlap2008-12-101-1/+0
| | | | | | | | | | | | | | | | Delete extra kernel-doc notation for struct fields and function parameters that don't exist: Warning(include/linux/mtd/nand.h:428): Excess struct/union/enum/typedef member 'wq' description in 'nand_chip' Warning(include/linux/mtd/nand.h:428): Excess struct/union/enum/typedef member 'datbuf' description in 'nand_chip' Warning(include/linux/mtd/nand.h:428): Excess struct/union/enum/typedef member 'oobbuf' description in 'nand_chip' Warning(include/linux/mtd/nand.h:428): Excess struct/union/enum/typedef member 'oobdirty' description in 'nand_chip' Warning(include/linux/mtd/nand.h:428): Excess struct/union/enum/typedef member 'data_poi' description in 'nand_chip' Warning(drivers/mtd/nand/nand_base.c:2527): Excess function parameter 'maxchips' description in 'nand_scan_tail' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] update internal API to support 64-bit device sizeAdrian Hunter2008-12-101-9/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | MTD internal API presently uses 32-bit values to represent device size. This patch updates them to 64-bits but leaves the external API unchanged. Extending the external API is a separate issue for several reasons. First, no one needs it at the moment. Secondly, whether the implementation is done with IOCTLs, sysfs or both is still debated. Thirdly external API changes require the internal API to be accepted first. Note that although the MTD API will be able to support 64-bit device sizes, existing drivers do not and are not required to do so, although NAND base has been updated. In general, changing from 32-bit to 64-bit values cause little or no changes to the majority of the code with the following exceptions: - printk message formats - division and modulus of 64-bit values - NAND base support - 32-bit local variables used by mtdpart and mtdconcat - naughtily assuming one structure maps to another in MEMERASE ioctl Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] [NAND] nand_base.c: reset chip firstKarl Beldan2008-09-161-0/+8
| | | | | | | | | | Some chips require a RESET after power-up (e.g. Micron MT29FxGxxxxx). The first command sent is NAND_CMD_READID. Issue a NAND_CMD_RESET in nand_scan_ident before reading the device id. Tested with an MT29F4G08AAC. Signed-off-by: Karl Beldan <karl.beldan@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] [NAND] Fix missing kernel-docAlexey Korolev2008-08-201-3/+3
| | | | | | | [Reported by Randy Dunlap] Signed-off-by: Alexey Korolev <akorolev@infradead.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] Define and use MTD_FAIL_ADDR_UNKNOWN instead of 0xffffffffAdrian Hunter2008-08-121-1/+1
| | | | | Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] [NAND] subpage read feature as a way to increase performance. Alexey Korolev2008-07-251-1/+86
| | | | | | | | | | | | | | | | | | | | | | | This patch enables NAND subpage read functionality. If upper layer drivers are requesting to read non page aligned data NAND subpage-read functionality reads the only whose ECC regions which include requested data when original code reads whole page. This significantly improves performance in many cases. Here are some digits : UBI volume mount time No subpage reads: 5.75 seconds Subpage read patch: 2.42 seconds Open/stat time for files on JFFS2 volume: No subpage read 0m 5.36s Subpage read 0m 2.88s Signed-off-by Alexey Korolev <akorolev@infradead.org> Acked-by: Artem Bityutskiy <dedekind@infradead.org> Acked-by: Jörn Engel <joern@logfs.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [MTD] [NAND] Verify probe by retrying to checking the results matchBen Dooks2008-04-221-0/+21
| | | | | | | | | | | With modern systems using bus-hold instead of bus pull-up, it can often lead to erroneous reporting of NAND devices where there are none. Do a double probe to ensure that the result we got the first time is repeatable, and if it is not then return that there is no chip there. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* Merge git://git.infradead.org/mtd-2.6Linus Torvalds2008-02-071-2/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/mtd-2.6: (120 commits) [MTD] Fix mtdoops.c compilation [MTD] [NOR] fix startup lock when using multiple nor flash chips [MTD] [DOC200x] eccbuf is statically defined and always evaluate to true [MTD] Fix maps/physmap.c compilation with CONFIG_PM [MTD] onenand: Add panic_write function to the onenand driver [MTD] mtdoops: Use the panic_write function when present [MTD] Add mtd panic_write function pointer [MTD] [NAND] Freescale enhanced Local Bus Controller FCM NAND support. [MTD] physmap.c: Add support for multiple resources [MTD] [NAND] Fix misparenthesization introduced by commit 78b65179... [MTD] [NAND] Fix Blackfin NFC ECC calculating bug with page size 512 bytes [MTD] [NAND] Remove wrong operation in PM function of the BF54x NFC driver [MTD] [NAND] Remove unused variable in plat_nand_remove [MTD] Unlocking all Intel flash that is locked on power up. [MTD] [NAND] at91_nand: Make mtdparts option can override board info [MTD] mtdoops: Various minor cleanups [MTD] mtdoops: Ensure sequential write to the buffer [MTD] mtdoops: Perform write operations in a workqueue [MTD] mtdoops: Add further error return code checking [MTD] [NOR] Test devtype, not definition in flash_probe(), drivers/mtd/devices/lart.c ...
| * [MTD] [NAND] Fix misparenthesization introduced by commit 78b65179...Scott Wood2008-02-031-2/+2
| | | | | | | | | | Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
| * [MTD] [NAND] Don't panic if a controller driver does ecc its own way.Scott Wood2008-01-081-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | Some hardware, such as the enhanced local bus controller used on some mpc83xx chips, does ecc transparently when reading and writing data, rather than providing a generic calculate/correct mechanism that can be exported to the nand subsystem. The subsystem should not BUG() when calculate, correct, or hwctl are missing, if the methods that call them have been overridden. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | drivers/mtd/: Spelling fixesJoe Perches2008-02-031-1/+1
|/ | | | | Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
* [MTD] [NAND] treat any negative return value from correct() as an errorMatt Reimer2007-10-201-3/+3
| | | | | | | | Treat any negative return value from a NAND driver's correct() function as a failure, rather than just -1. Signed-off-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] [NAND] Avoid deadlock in erase callback; release chip lock first.David Woodhouse2007-10-061-3/+4
| | | | | | | | When the erase callback performs some other action on the flash, it's highly likely to deadlock unless we actually release the chip lock before calling it. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] [NAND] nand_base.c fix broken linkmaximilian attems2007-08-011-1/+1
| | | | | | | | replace with working link from nand Kconfig help text fixes bugzilla 7815 Signed-off-by: maximilian attems <max@stro.at> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] [NAND] fix race in nand_base.cArtem Bityutskiy2007-07-231-0/+4
| | | | | | | | | | | | | When we mark block bad we have to get chip because this involves writing to the page's OOB. We hit this bug in UBI - we observed random obscure crashes when it marks block bad from the background thread and there is some parallel task which utilizes flash. This patch also adds a TODO note about BBT table protection which it seems does not exist. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] [NAND] nand_base.c: fix type of eccpos pointerBen Dooks2007-06-281-4/+4
| | | | | | | | | | | | | The nand_base.c driver implicitly casts the uint32_t eccpos array to 'int *', which is not only not guaranteed to be the same sign as the source, but is not guaranteed to be the same size. Fix by changing nand_base.c to use uint32_t referencing the eccpos fields. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] [NAND] Tidy up handling of page number in nand_block_bad()Thomas Knobloch2007-05-031-6/+5
| | | | | | | | | | | Further to the previous patch fixing the calculation of page number, both branches are using the same result. Clean up the function accordingly, calculating it (and also masking with pagemask) only in one place. Signed-off-by: Thomas Knobloch <knobloch@siemens.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] [NAND] Wrong calculation of page number in nand_block_bad()Knobloch, Thomas2007-04-271-1/+1
| | | | | | | | | | | In case that there is no memory based bad block table available the function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call nand_block_bad() directly. When parameter 'getchip' is set to zero, nand_block_bad() will not right shift the offset to calculate the correct page number. Signed-off-by: Thomas Knobloch <knobloch@siemens.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] [NAND] Casting bug in nand_default_block_markbadAndre Renaud2007-04-171-1/+1
| | | | | | | | | | | There is a slight bug in nand_default_block_markbad, where the offset is cast to an integer, prior to being shifted. This means that on large offsets, it is incorrectly doing a signed shift & losing bits. Fixed this by doing the cast after the shift (as is done elsewhere in the code). Signed-off-by: Andre Renaud <andre@bluewatersys.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] [NAND] Use ecc.read/write_page_raw consequentlyThomas Gleixner2007-04-171-2/+2
| | | | | | | | | Use the functions in the ecc structure instead of the default ones, so the override by the board driver is effective also for software ecc code paths. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] [NAND] make oobavail publicVitaly Wool2007-03-081-0/+1
| | | | | | | | | | | During the MTD rework the oobavail parameter of mtd_info structure has become private. This is not quite correct in terms of integrity and logic. If we have means to write to OOB area, then we'd like to know upfront how many bytes out of OOB are spare per page to be able to adapt to specific cases. The patch inlined adds the public oobavail parameter. Signed-off-by: Vitaly Wool <vwool@ru.mvista.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] remove unused ecctype,eccsize fields from struct mtd_infoArtem Bityutskiy2007-02-091-1/+0
| | | | | | | | | | | | Remove unused and broken mtd->ecctype and mtd->eccsize fields from struct mtd_info. Do not remove them from userspace API data structures (don't want to breake userspace) but mark them as obsolete by a comment. Any userspace program which uses them should be half-broken anyway, so this is more about saving data structure size. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [MTD] [NAND] Correctly validate out-of-band offset and lengthAdrian Hunter2007-02-091-5/+41
| | | | | | | | | | | | Add checks to ensure that out-of-band reads and writes are not attempted with an invalid offset or length. Specifically, the offset must be less than the size of oob for a page and the length must not go beyond the size of the device. Additionally the checks must adjust for auto-placement (MTD_OOB_AUTO) of oob data. Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* Merge branch 'master' of ↵David Woodhouse2006-12-011-0/+1
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 03:25:01 +0000