summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/raw/mxc_nand.c
Commit message (Collapse)AuthorAgeFilesLines
* mtd: rawnand: Deprecate ->chip_delayBoris Brezillon2018-10-031-1/+1
| | | | | | | | | The wait timeouts and delays are directly extracted from the NAND timings and ->chip_delay is only used in legacy path, so let's move it to the nand_legacy struct to make it clear. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Deprecate ->{set,get}_features() hooksBoris Brezillon2018-10-031-2/+2
| | | | | | | | Those hooks should be replaced by a proper ->exec_op() implementation. Move them to the nand_legacy struct to make it clear. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Deprecate ->dev_ready() and ->waitfunc()Boris Brezillon2018-10-031-1/+1
| | | | | | | | Those hooks have been replaced by ->exec_op(). Move them to the nand_legacy struct. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Deprecate ->cmd_ctrl() and ->cmdfunc()Boris Brezillon2018-10-031-1/+1
| | | | | | | | Those hooks have been replaced by ->exec_op(). Move them to the nand_legacy struct. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Deprecate ->{read, write}_{byte, buf}() hooksBoris Brezillon2018-10-031-5/+5
| | | | | | | | All those hooks have been replaced by ->exec_op(). Move them to the nand_legacy struct. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to chip->setup_data_interface()Boris Brezillon2018-10-031-4/+3
| | | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->setup_data_interface() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to chip->{get, set}_features()Boris Brezillon2018-10-031-8/+8
| | | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->{get,set}_features() hooks. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to chip->cmdfunc()Boris Brezillon2018-10-031-3/+3
| | | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->cmdfunc() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to chip->dev_ready()Boris Brezillon2018-10-031-1/+1
| | | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->dev_ready() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to chip->select_chip()Boris Brezillon2018-10-031-5/+3
| | | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->select_chip() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to chip->write_xxx() hooksBoris Brezillon2018-10-031-4/+4
| | | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all chip->write_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to chip->read_xxx() hooksBoris Brezillon2018-10-031-5/+5
| | | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all chip->read_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to ecc->write_xxx() hooksBoris Brezillon2018-10-031-7/+6
| | | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all ecc->write_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to ecc->read_xxx() hooksBoris Brezillon2018-10-031-6/+5
| | | | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all ecc->read_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to nand_release()Boris Brezillon2018-10-031-1/+1
| | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers to take a nand_chip object instead of an mtd_info one. Now is nand_release()'s turn. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Pass a nand_chip object to nand_scan()Boris Brezillon2018-10-031-1/+1
| | | | | | | | | | Let's make the raw NAND API consistent by patching all helpers to take a nand_chip object instead of an mtd_info one. We start with nand_scan(). Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: Get rid of the ->read_word() hookBoris Brezillon2018-09-041-13/+0
| | | | | | | | | Commit c120e75e0e7d ("mtd: nand: use read_oob() instead of cmdfunc() for bad block check") removed this only user of the ->read_word() method but kept the hook in place. Remove it now. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: mxc: convert driver to nand_scan()Miquel Raynal2018-07-311-65/+71
| | | | | | | | | | | Two helpers have been added to the core to do all kind of controller side configuration/initialization between the detection phase and the final NAND scan. Implement these hooks so that we can convert the driver to just use nand_scan() instead of the nand_scan_ident() + nand_scan_tail() pair. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
* mtd: rawnand: mxc: Switch to SPDX identifierFabio Estevam2018-07-181-14/+1
| | | | | | | | Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: mxc: Avoid inclusion of asm/mach headersBoris Brezillon2018-07-181-2/+0
| | | | | | | | | asm/mach/flash.h does not seem to be needed, drop this #include to make the code completely machine and arch independent and allow one to compile it when COMPILE_TEST=y. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: mxc: remove __init qualifier from mxcnd_probe_dtMartin Kaiser2018-07-181-2/+2
| | | | | | | | | | | | | | Using the sysfs unbind, bind nodes, mxcnd_probe and mxcnd_probe_dt can potentially be called at any time. After the __init functions are cleaned, mxcnd_probe_dt is no longer available. Calling it anyway causes a crash. mxcnd_probe used to be marked as __init, this was removed years ago. Remove the __init qualifier from from mxcnd_probe_dt as well. Fixes: 06f255106923 ("mtd: remove use of __devinit") Signed-off-by: Martin Kaiser <martin@kaiser.cx> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
* mtd: rawnand: mxc: set spare area size register explicitlyMartin Kaiser2018-06-191-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The v21 version of the NAND flash controller contains a Spare Area Size Register (SPAS) at offset 0x10. Its setting defaults to the maximum spare area size of 218 bytes. The size that is set in this register is used by the controller when it calculates the ECC bytes internally in hardware. Usually, this register is updated from settings in the IIM fuses when the system is booting from NAND flash. For other boot media, however, the SPAS register remains at the default setting, which may not work for the particular flash chip on the board. The same goes for flash chips whose configuration cannot be set in the IIM fuses (e.g. chips with 2k sector size and 128 bytes spare area size can't be configured in the IIM fuses on imx25 systems). Set the SPAS register explicitly during the preset operation. Derive the register value from mtd->oobsize that was detected during probe by decoding the flash chip's ID bytes. While at it, rename the define for the spare area register's offset to NFC_V21_RSLTSPARE_AREA. The register at offset 0x10 on v1 controllers is different from the register on v21 controllers. Fixes: d484018 ("mtd: mxc_nand: set NFC registers after reset") Cc: stable@vger.kernel.org Signed-off-by: Martin Kaiser <martin@kaiser.cx> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
* mtd: rawnand: mxc: fix probe function error pathMiquel Raynal2018-03-291-4/+7
| | | | | | | | | An error after nand_scan_tail() should trigger a nand_cleanup(). The helper mtd_device_parse_register() returns an error code that should be checked and nand_cleanup() called accordingly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
* mtd: rawnand: mxc: remove useless checks in GET/SET_FEATURES functionsMiquel Raynal2018-03-201-10/+0
| | | | | | | | | | All the calls to the chip's hooks ->get/set_features() go through the core's wrappers nand_get/set_features() that already do the necessary checks about feature support. Remove these checks from the mxc's functions. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
* mtd: rawnand: rename SET/GET FEATURES related functionsMiquel Raynal2018-03-201-8/+6
| | | | | | | | | | SET/GET FEATURES are flagged ONFI-compliant because of their name. This is not accurate as non-ONFI NAND chips support it and use it. Rename the hooks and helpers to remove the "onfi" prefix. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
* mtd: nand: move raw NAND related code to the raw/ subdirBoris Brezillon2018-02-161-0/+1966
As part of the process of sharing more code between different NAND based devices, we need to move all raw NAND related code to the raw/ subdirectory. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-04-25 06:25:03 +0000