summaryrefslogtreecommitdiffstats
path: root/drivers/mtd
Commit message (Collapse)AuthorAgeFilesLines
...
| | * mtd: nand: gpmi: add gpmi dsm supend/resume supportHuang Shijie2016-01-231-1/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i.MX6SX supports deep sleep mode(DSM) that may turn off GPMI/BCH power during suspend, add gpmi nand suspend/resume function to release DMA channel in suspend function and re-init GPMI/BCH controller during resume function. Although it is not necessary to restore GPMI/BCH registers value for i.MX6QDL, the code doesn't distinguish different platforms to keep the code simple. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Han Xu <han.xu@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| | * mtd: bcm47xxpart: don't fail because of bit-flipsRafał Miłecki2016-01-231-16/+22
| | | | | | | | | | | | | | | | | | | | | | | | Bit-flip errors may occur on NAND flashes and are harmless. Handle them gracefully as read content is still reliable and can be parsed. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| | * mtd: bcm47xxpart: limit scanned flash area on BCM47XX (MIPS) onlyRafał Miłecki2016-01-231-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We allowed using bcm47xxpart on BCM5301X arch with commit: 9e3afa5f5c7 ("mtd: bcm47xxpart: allow enabling on ARCH_BCM_5301X") BCM5301X devices may contain some partitions in higher memory, e.g. Netgear R8000 has board_data at 0x2600000. To detect them we should use size limit on MIPS only. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| | * mtd: onenand: unexport onenand_default_bbt()Thomas Petazzoni2016-01-231-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The onenand_default_bbt() function is only used by the OneNAND core and not by drivers, so there is no real need to export it. Additionally, the corresponding nand_default_bbt() for regular NANDs is not exported either, so for consistency reasons, this commit removes the EXPORT_SYMBOL on onenand_default_bbt(). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| | * mtd: onenand: make onenand_scan_bbt() staticThomas Petazzoni2016-01-231-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Like was done in commit 17799359e7b3fa6ef4f2bf926cd6821cf7903ecf ("mtd: nand_bbt: make nand_scan_bbt() static") for the NAND code, this commit makes the onenand_scan_bbt() function static in the OneNAND code, since it is only used in onenand_bbt.c itself. Consequently, the EXPORT_SYMBOL() and declaration in bbm.h are also removed. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| | * mtd: nand: remove EXPORT_SYMBOL of nand_scan_bbt()Thomas Petazzoni2016-01-231-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 17799359e7b3fa6ef4f2bf926cd6821cf7903ecf ("mtd: nand_bbt: make nand_scan_bbt() static"), the nand_scan_bbt() function is marked as static but is still exported using EXPORT_SYMBOL(), which doesn't make much sense. This commit gets rid of the useless EXPORT_SYMBOL. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| | * mtd: nand: sunxi: use mtd_div_by_ws() helperBrian Norris2016-01-231-1/+1
| | | | | | | | | | | | | | | | | | Suggested-by: Richard Weinberger <richard@nod.at> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
| | * mtd: atmel_nand: Do not warn on bitflipsRomain Izard2016-01-231-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When using multi-bit ECC, it is normal for the NAND Flash driver to correct bit errors during the life of the product. Those errors will only be cleared once a threshold has been reached, and corrections can occur regularly before this. Use only dev_dbg and not dev_info to report the bitflips, to keep the system log clean when everything works correctly. Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Acked-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| | * mtd: nand: sunxi: add randomizer supportBoris BREZILLON2016-01-221-26/+261
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the randomizer engine available in Allwinner's NFC IP. Randomization is useful to support modern NAND chips which are sensitive to repeated patterns. On such NANDs you might experience an unexpectedly high number of bitflips when you repeat the same pattern all over a given NAND block. Randomizing input data mitigate this problem by avoiding such repeated patterns. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| | * mtd: nand: add NAND_NEED_SCRAMBLING flag to the H27UCG8T2ATR-BC definitionBoris BREZILLON2016-01-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | The H27UCG8T2ATR-BC requires an external data scrambler. Reflect this constraint in the nand_flash_ids definition. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| | * mtd: nand: mpc5121: use 'of_machine_is_compatible' to simplify codeChristophe Jaillet2016-01-221-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current code is the same as 'of_machine_is_compatible'. So use it in order to remove a few lines of code and to be more consistent with other parts of the kernel. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| | * mtd: nuc900_nand: read correct SMISR registerArnd Bergmann2016-01-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The nuc900_nand driver has always passed an incorrect register address in its nuc900_check_rb() function, which cannot possibly work, and in some configurations gives us a build warning: drivers/mtd/nand/nuc900_nand.c: In function 'nuc900_check_rb': drivers/mtd/nand/nuc900_nand.c:27:23: warning: passing argument 1 of '__raw_readl' makes pointer from integer without a cast [-Wint-conversion] #define REG_SMISR 0xac drivers/mtd/nand/nuc900_nand.c:118:20: note: in expansion of macro 'REG_SMISR' val = __raw_readl(REG_SMISR); This makes sure we actually read from the register rather than from (void *)0x000000ac in user space. I suspect nobody noticed this before because the nuc900_nand_devready() function never gets called, or nobody uses this driver on an upstream kernel. Possibly even both. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| | * mtd: mtk-nor: Drop bogus __init from mtk_nor_init()Geert Uytterhoeven2016-01-151-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | WARNING: drivers/mtd/spi-nor/mtk-quadspi.o(.text+0x77e): Section mismatch in reference from the function mtk_nor_drv_probe() to the function .init.text:mtk_nor_init() The function mtk_nor_drv_probe() references the function __init mtk_nor_init(). This is often because mtk_nor_drv_probe lacks a __init annotation or the annotation of mtk_nor_init is wrong. Drop the bogus __init from mtk_nor_init() to kill this warning. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* | | mtd: ubi: Add logging functions ubi_msg, ubi_warn and ubi_errJoe Perches2016-03-202-6/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using logging functions instead of macros can reduce overall object size. $ size drivers/mtd/ubi/built-in.o* text data bss dec hex filename 271620 163364 73696 508680 7c308 drivers/mtd/ubi/built-in.o.allyesconfig.new 287638 165380 73504 526522 808ba drivers/mtd/ubi/built-in.o.allyesconfig.old 87728 3780 504 92012 1676c drivers/mtd/ubi/built-in.o.defconfig.new 97084 3780 504 101368 18bf8 drivers/mtd/ubi/built-in.o.defconfig.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Richard Weinberger <richard@nod.at>
* | | Merge tag 'gpio-v4.6-1' of ↵Linus Torvalds2016-03-171-1/+1
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for kernel v4.6. There is quite a lot of interesting stuff going on. The patches to other subsystems and arch-wide are ACKed as far as possible, though I consider things like per-arch <asm/gpio.h> as essentially a part of the GPIO subsystem so it should not be needed. Core changes: - The gpio_chip is now a *real device*. Until now the gpio chips were just piggybacking the parent device or (gasp) floating in space outside of the device model. We now finally make GPIO chips devices. The gpio_chip will create a gpio_device which contains a struct device, and this gpio_device struct is kept private. Anything that needs to be kept private from the rest of the kernel will gradually be moved over to the gpio_device. - As a result of making the gpio_device a real device, we have added resource management, so devm_gpiochip_add_data() will cut down on overhead and reduce code lines. A huge slew of patches convert almost all drivers in the subsystem to use this. - Building on making the GPIO a real device, we add the first step of a new userspace ABI: the GPIO character device. We take small steps here, so we first add a pure *information* ABI and the tool "lsgpio" that will list all GPIO devices on the system and all lines on these devices. We can now discover GPIOs properly from userspace. We still have not come up with a way to actually *use* GPIOs from userspace. - To encourage people to use the character device for the future, we have it always-enabled when using GPIO. The old sysfs ABI is still opt-in (and can be used in parallel), but is marked as deprecated. We will keep it around for the foreseeable future, but it will not be extended to cover ever more use cases. Cleanup: - Bjorn Helgaas removed a whole slew of per-architecture <asm/gpio.h> includes. This dates back to when GPIO was an opt-in feature and no shared library even existed: just a header file with proper prototypes was provided and all semantics were up to the arch to implement. These patches make the GPIO chip even more a proper device and cleans out leftovers of the old in-kernel API here and there. Still some cruft is left but it's very little now. - There is still some clamping of return values for .get() going on, but we now return sane values in the vast majority of drivers and the errorpath is sanitized. Some patches for powerpc, blackfin and unicore still drop in. - We continue to switch the ARM, MIPS, blackfin, m68k local GPIO implementations to use gpiochip_add_data() and cut down on code lines. - MPC8xxx is converted to use the generic GPIO helpers. - ATH79 is converted to use the generic GPIO helpers. New drivers: - WinSystems WS16C48 - Acces 104-DIO-48E - F81866 (a F7188x variant) - Qoric (a MPC8xxx variant) - TS-4800 - SPI serializers (pisosr): simple 74xx shift registers connected to SPI to obtain a dirt-cheap output-only GPIO expander. - Texas Instruments TPIC2810 - Texas Instruments TPS65218 - Texas Instruments TPS65912 - X-Gene (ARM64) standby GPIO controller" * tag 'gpio-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (194 commits) Revert "Share upstreaming patches" gpio: mcp23s08: Fix clearing of interrupt. gpiolib: Fix comment referring to gpio_*() in gpiod_*() gpio: pca953x: Fix pca953x_gpio_set_multiple() on 64-bit gpio: xgene: Fix kconfig for standby GIPO contoller gpio: Add generic serializer DT binding gpio: uapi: use 0xB4 as ioctl() major gpio: tps65912: fix bad merge Revert "gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free" gpio: omap: drop dev field from gpio_bank structure gpio: mpc8xxx: Slightly update the code for better readability gpio: mpc8xxx: Remove *read_reg and *write_reg from struct mpc8xxx_gpio_chip gpio: mpc8xxx: Fixup setting gpio direction output gpio: mcp23s08: Add support for mcp23s18 dt-bindings: gpio: altera: Fix altr,interrupt-type property gpio: add driver for MEN 16Z127 GPIO controller gpio: lp3943: Drop pin_used and lp3943_gpio_request/lp3943_gpio_free gpio: timberdale: Switch to devm_ioremap_resource() gpio: ts4800: Add IMX51 dependency gpiolib: rewrite gpiodev_add_to_list ...
| * | | gpio: Include linux/gpio.h instead of asm/gpio.hBjorn Helgaas2016-02-161-1/+1
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most arches have an asm/gpio.h that merely includes linux/gpio.h. The others select ARCH_HAVE_CUSTOM_GPIO_H, and when that's selected, linux/gpio.h includes asm/gpio.h. Therefore, code should include linux/gpio.h instead of including asm/gpio.h directly. Remove includes of asm/gpio.h, adding an include of linux/gpio.h when necessary. This is a follow-on to 7563bbf89d06 ("gpiolib/arches: Centralise bolierplate asm/gpio.h"). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | | Merge tag 'for-linus-20160311' of git://git.infradead.org/linux-mtdLinus Torvalds2016-03-111-1/+1
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MTD fixes from Brian Norris: "Late MTD fix for v4.5: - A simple error code handling fix for the NAND ECC test; this was a regression in v4.5-rc1 - A MAINTAINERS update, which might as well go in ASAP" * tag 'for-linus-20160311' of git://git.infradead.org/linux-mtd: MAINTAINERS: add a maintainer for the NAND subsystem mtd: nand: tests: fix regression introduced in mtd_nandectest
| * | | mtd: nand: tests: fix regression introduced in mtd_nandectestJorge Ramirez-Ortiz2016-03-041-1/+1
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Offending Commit: 6e94119 "mtd: nand: return consistent error codes in ecc.correct() implementations" The new error code was not being handled properly in double bit error detection. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* / / ubi: Fix out of bounds write in volume update codeRichard Weinberger2016-03-051-1/+1
|/ / | | | | | | | | | | | | | | | | | | ubi_start_leb_change() allocates too few bytes. ubi_more_leb_change_data() will write up to req->upd_bytes + ubi->min_io_size bytes. Cc: stable@vger.kernel.org Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
* | Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2016-01-241-5/+3
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for 4.5 plus some 4.4 fixes. The executive summary: - ATH79 platform improvments, use DT bindings for the ATH79 USB PHY. - Avoid useless rebuilds for zboot. - jz4780: Add NEMC, BCH and NAND device tree nodes - Initial support for the MicroChip's DT platform. As all the device drivers are missing this is still of limited use. - Some Loongson3 cleanups. - The unavoidable whitespace polishing. - Reduce clock skew when synchronizing the CPU cycle counters on CPU startup. - Add MIPS R6 fixes. - Lots of cleanups across arch/mips as fallout from KVM. - Lots of minor fixes and changes for IEEE 754-2008 support to the FPU emulator / fp-assist software. - Minor Ralink, BCM47xx and bcm963xx platform support improvments. - Support SMP on BCM63168" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (84 commits) MIPS: zboot: Add support for serial debug using the PROM MIPS: zboot: Avoid useless rebuilds MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIB MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function MIPS: bcm963xx: Update bcm_tag field image_sequence MIPS: bcm963xx: Move extended flash address to bcm_tag header file MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structure MIPS: bcm63xx: nvram: Use nvram structure definition from header file MIPS: bcm963xx: Add Broadcom BCM963xx board nvram data structure MAINTAINERS: Add KVM for MIPS entry MIPS: KVM: Add missing newline to kvm_err() MIPS: Move KVM specific opcodes into asm/inst.h MIPS: KVM: Use cacheops.h definitions MIPS: Break down cacheops.h definitions MIPS: Use EXCCODE_ constants with set_except_vector() MIPS: Update trap codes MIPS: Move Cause.ExcCode trap codes to mipsregs.h MIPS: KVM: Make kvm_mips_{init,exit}() static MIPS: KVM: Refactor added offsetof()s MIPS: KVM: Convert EXPORT_SYMBOL to _GPL ...
| * | MIPS: bcm963xx: Move extended flash address to bcm_tag header fileSimon Arlott2016-01-241-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The extended flash address needs to be subtracted from bcm_tag flash image offsets. Move this value to the bcm_tag header file. Renamed define name to consistently use bcm963xx for flash layout which should be considered a property of the board and not the SoC (i.e. bcm63xx could theoretically be used on a board without CFE or any flash). Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Cc: MIPS Mailing List <linux-mips@linux-mips.org> Cc: MTD Maling List <linux-mtd@lists.infradead.org> Patchwork: https://patchwork.linux-mips.org/patch/11833/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structureSimon Arlott2016-01-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move Broadcom BCM963xx image tag data structure to include/linux/ so that drivers outside of mach-bcm63xx can use it. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Cc: MIPS Mailing List <linux-mips@linux-mips.org> Cc: MTD Maling List <linux-mtd@lists.infradead.org> Patchwork: https://patchwork.linux-mips.org/patch/11832/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | | wrappers for ->i_mutex accessAl Viro2016-01-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | | Merge tag 'for-linus-20160112' of git://git.infradead.org/linux-mtdLinus Torvalds2016-01-1392-1617/+3065
|\ \ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MTD updates from Brian Norris: "Generic MTD: - populate the MTD device 'of_node' field (and get a proper 'of_node' symlink in sysfs) This yielded some new helper functions, and changes across a variety of drivers - partitioning cleanups, to prepare for better device-tree based partitioning in the future Eliminate a lot of boilerplate for drivers that want to use OF-based partition parsing The DT bindings for this didn't settle yet, so most non-cleanup portions are deferred for a future release NAND: - embed a struct mtd_info inside struct nand_chip This is really long overdue; too many drivers have to do the same silly boilerplate to allocate and link up two "independent" structs, when in fact, everyone is assuming there is an exact 1:1 relationship between a NAND chips struct and its underlying MTD. This aids improved helpers and should make certain abstractions easier in the future. Also causes a lot of churn, helped along by some automated code transformations - add more core support for detecting (and "correcting") bitflips in erased pages; requires opt-in by drivers, but at least we kill a few bad implementations and hopefully stave off future ones - pxa3xx_nand: cleanups, a few fixes, and PM improvements - new JZ4780 NAND driver SPI NOR: - provide default erase function, for controllers that just want to send the SECTOR_ERASE command directly - fix some module auto-loading issues with device tree ("jedec,spi-nor") - error handling fixes - new Mediatek QSPI flash driver Other: - cfi: force valid geometry Kconfig (finally!) This one used to trip up randconfigs occasionally, since bots aren't deterred by big scary "advanced configuration" menus More? Probably. See the commit logs" * tag 'for-linus-20160112' of git://git.infradead.org/linux-mtd: (168 commits) mtd: jz4780_nand: replace if/else blocks with switch/case mtd: nand: jz4780: Update ecc correction error codes mtd: nandsim: use nand_get_controller_data() mtd: jz4780_nand: remove useless mtd->priv = chip assignment staging: mt29f_spinand: make use of nand_set/get_controller_data() helpers mtd: nand: make use of nand_set/get_controller_data() helpers ARM: make use of nand_set/get_controller_data() helpers mtd: nand: add helpers to access ->priv mtd: nand: jz4780: driver for NAND devices on JZ4780 SoCs mtd: nand: jz4740: remove custom 'erased check' implementation mtd: nand: diskonchip: remove custom 'erased check' implementation mtd: nand: davinci: remove custom 'erased check' implementation mtd: nand: use nand_check_erased_ecc_chunk in default ECC read functions mtd: nand: return consistent error codes in ecc.correct() implementations doc: dt: mtd: new binding for jz4780-{nand,bch} mtd: cfi_cmdset_0001: fixing memory leak and handling failed kmalloc mtd: spi-nor: wait until lock/unlock operations are ready mtd: tests: consolidate kmalloc/memset 0 call to kzalloc jffs2: use to_delayed_work mtd: nand: assign reasonable default name for NAND drivers ...
| * | mtd: jz4780_nand: replace if/else blocks with switch/caseBrian Norris2016-01-081-15/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using switch/case helps make this logic more clear and more robust. With this structure: * it's clear that this driver only support ECC_{HW,SOFT,SOFT_BCH}; and * we can sanely handle new ECC unsupported modes (right now, this code makes incorrect assumptions about the possible values in the nand_ecc_modes_t enum; e.g., what happens with NAND_ECC_HW_OOB_FIRST?) Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Alex Smith <alex@alex-smith.me.uk> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Harvey Hunt <harvey.hunt@imgtec.com> Acked-by: Harvey Hunt <harvey.hunt@imgtec.com>
| * | mtd: nand: jz4780: Update ecc correction error codesHarvey Hunt2016-01-081-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update jz4780_bch_ecc_correct's return codes with appropriate values, as specified in /include/linux/mtd/nand.h. Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Cc: Alex Smith <alex@alex-smith.me.uk> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: linux-kernel@vger.kernel.org Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | mtd: nandsim: use nand_get_controller_data()Brian Norris2016-01-071-6/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | Commit d699ed250c07 ("mtd: nand: make use of nand_set/get_controller_data() helpers") overlooked some uses of nand_chip::priv. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
| * | mtd: jz4780_nand: remove useless mtd->priv = chip assignmentBrian Norris2016-01-071-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As of commit 2d3b77bac34b ("mtd: nand: update mtd_to_nand()"), this assignment isn't necessary, since struct mtd_info is embedded in struct nand_chip. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Harvey Hunt <harvey.hunt@imgtec.com> Cc: Alex Smith <alex@alex-smith.me.uk> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
| * | mtd: nand: make use of nand_set/get_controller_data() helpersBoris BREZILLON2016-01-0726-257/+260
| | | | | | | | | | | | | | | | | | | | | | | | | | | New helpers have been added to avoid directly accessing chip->field. Use them where appropriate. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [Brian: fixed a few rebase conflicts] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | mtd: nand: jz4780: driver for NAND devices on JZ4780 SoCsAlex Smith2016-01-075-0/+857
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a driver for NAND devices connected to the NEMC on JZ4780 SoCs, as well as the hardware BCH controller. DMA is not currently implemented. While older 47xx SoCs also have a BCH controller, they are incompatible with the one in the 4780 due to differing register/bit positions, which would make implementing a common driver for them quite messy. Signed-off-by: Alex Smith <alex.smith@imgtec.com> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: linux-mtd@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> [Brian: fixed a few small mistakes] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | mtd: nand: jz4740: remove custom 'erased check' implementationBoris BREZILLON2016-01-061-18/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The jz4740 driver is manually checking for 'erased pages' while correcting ECC bytes. This logic can now done by the core infrastructure, and can thus be removed from this driver. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | mtd: nand: diskonchip: remove custom 'erased check' implementationBoris BREZILLON2016-01-061-35/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The diskonchip driver is manually checking for 'erased pages' while correcting ECC bytes. This logic can now done by the core infrastructure, and can thus be removed from this driver. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | mtd: nand: davinci: remove custom 'erased check' implementationBoris BREZILLON2016-01-061-8/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The davinci driver is manually checking for 'erased pages' while correcting ECC bytes. This logic can now done by the core infrastructure, and can thus be removed from this driver. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Franklin S Cooper Jr. <fcooper@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | mtd: nand: use nand_check_erased_ecc_chunk in default ECC read functionsBoris BREZILLON2016-01-061-7/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The default NAND read functions are relying on the underlying controller driver to correct bitflips, but some of those controllers cannot properly fix bitflips in erased pages. Check for bitflips in erased pages in default core functions if the driver delegated the this check by setting the NAND_ECC_GENERIC_ERASED_CHECK flag. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Franklin S Cooper Jr. <fcooper@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | mtd: nand: return consistent error codes in ecc.correct() implementationsBoris BREZILLON2016-01-069-21/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The error code returned by the ecc.correct() are not consistent over the all implementations. Document the expected behavior in include/linux/mtd/nand.h and fix offending implementations. [Brian: this looks like a bugfix for the ECC reporting in the bf5xx_nand driver, but we haven't seen any testing results for it] Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Franklin S Cooper Jr. <fcooper@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | mtd: cfi_cmdset_0001: fixing memory leak and handling failed kmallocInsu Yun2016-01-061-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | kmalloc needs to be handled when failing in memory pressure. Also, it has memory leak in error routine. Signed-off-by: Insu Yun <wuninsu@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | mtd: spi-nor: wait until lock/unlock operations are readyEzequiel García2016-01-061-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Micron and Numonyx devices, the status register write command (WRSR), raises a work-in-progress bit (WIP) on the status register. The datasheets for these devices specify that while the status register write is in progress, the status register WIP bit can still be read to check the end of the operation. This commit adds a wait_till_ready call on lock/unlock operations, which is required for Micron and Numonyx but should be harmless for others. This is needed to prevent applications from issuing erase or program operations before the unlock operation is completed. Reported-by: Stas Sergeev <stsp@list.ru> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | mtd: tests: consolidate kmalloc/memset 0 call to kzallocNicholas Mc Guire2016-01-061-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | This is an API consolidation only. The use of kmalloc + memset to 0 is equivalent to kzalloc. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | mtd: nand: assign reasonable default name for NAND driversBrian Norris2016-01-061-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commits such as commit 853f1c58c4b2 ("mtd: nand: omap2: show parent device structure in sysfs") attempt to rely on the core MTD code to set the MTD name based on the parent device. However, nand_base tries to set a different default name according to the flash name (e.g., extracted from the ONFI parameter page), which means NAND drivers will never make use of the MTD defaults. This is not the intention of commit 853f1c58c4b2. This results in problems when trying to use the cmdline partition parser, since the MTD name is different than expected. Let's fix this by providing a default NAND name, where possible. Note that this is not really a great default name in the long run, since this means that if there are multiple MTDs attached to the same controller device, they will have the same name. But that is an existing issue and requires future work on a better controller vs. flash chip abstraction to fix properly. Fixes: 853f1c58c4b2 ("mtd: nand: omap2: show parent device structure in sysfs") Reported-by: Heiko Schocher <hs@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Heiko Schocher <hs@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Frans Klaver <fransklaver@gmail.com> Cc: <stable@vger.kernel.org>
| * | mtd: merge MTD development from v4.4 into for-v4.5 developmentBrian Norris2016-01-052-15/+21
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | Small conflict between some bugfixes for 4.4 and some refactoring for 4.5. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | mtd: nand: fix for drop unnecessary partition parser dataStephen Rothwell2016-01-051-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From Stephen: Hi Brian, After merging the l2-mtd tree, today's linux-next build (powerpc ppc44x_defconfig) failed like this: drivers/mtd/nand/ndfc.c: In function 'ndfc_chip_init': drivers/mtd/nand/ndfc.c:177:2: error: 'ppdata' undeclared (first use in this function) ppdata.of_node = flash_np; ^ Caused by commit a61ae81a1907 ("mtd: nand: drop unnecessary partition parser data") The flash node is already correctly assigned using the new helper (nand_set_flash_node()) so the correct fix is indeed to simply drop this line. Fixes: a61ae81a1907 ("mtd: nand: drop unnecessary partition parser data") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | mtd: sh_flctl: pass FIFO as physical addressArnd Bergmann2015-12-181-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By convention, the FIFO address we pass using dmaengine_slave_config is a physical address in the form that is understood by the DMA engine, as a dma_addr_t, phys_addr_t or resource_size_t. The sh_flctl driver however passes a virtual __iomem address that gets cast to dma_addr_t in the slave driver. This happens to work on shmobile because that platform sets up an identity mapping for its MMIO regions, but such code is not portable to other platforms, and prevents us from ever changing the platform mapping or reusing the driver on other architectures like ARM64 that might not have the mapping. We also get a warning about a type mismatch for the case that dma_addr_t is wider than a pointer, i.e. when CONFIG_LPAE is set: drivers/mtd/nand/sh_flctl.c: In function 'flctl_setup_dma': drivers/mtd/nand/sh_flctl.c:163:17: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] cfg.dst_addr = (dma_addr_t)FLDTFIFO(flctl); This changes the driver to instead pass the physical address of the FIFO that is extracted from the MMIO resource, making the code more portable and avoiding the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | mtd: denali: make MTD_NAND_DENALI_DT dependent on OFMasahiro Yamada2015-12-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The build passes even if CONFIG_OF is undefined, but it makes sense to let it depend on OF. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | mtd: nand: Disable subpage writes for drivers without ecc->hwctlHelmut Schaa2015-12-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | nand_write_subpage_hwecc causes a crash if the driver did not register ecc->hwctl or ecc->calculate. Fix this by disabling subpage writes if ecc->hwctl or ecc->calculate is not provided by the driver. This behavior was introduced in commit 837a6ba4f3b6d23026674e6af6b6849a4634fff9 "mtd: nand: subpage write support for hardware based ECC schemes". This fixes a crash with fsl_elbc_nand and maybe others: Unable to handle kernel paging request for instruction fetch Faulting instruction address: 0x00000000 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=2 P1020 RDB Modules linked in: ath9k ath9k_common pppoe ppp_async option iptable_nat ath9k_hw ath usb_wwan pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv4 mac80211 ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_quota xt_policy xt_pkttype xt_owner xt_nat xt_multiport xt_mh CPU: 1 PID: 2161 Comm: ubiformat Not tainted 3.10.26 #6 task: efbc2700 ti: c7950000 task.ti: c7950000 NIP: 00000000 LR: c01a495c CTR: 00000000 REGS: c7951cb0 TRAP: 0400 Not tainted (3.10.26) MSR: 00029000 <CE,EE,ME> CR: 24002028 XER: 00000000 GPR00: c01a4b6c c7951d60 efbc2700 ef84b000 00000001 00000000 000001ff c7800500 GPR08: 00000000 00000000 efae5e40 c01a4ae4 24002022 10023418 c7951e5c c7800500 GPR16: c017b6a8 00000000 0000003f c053404c 00000000 00000004 00000000 00000003 GPR24: 00000010 00000200 ef84b000 c7800d00 c7800000 c7800500 ef84b1c8 00000000 NIP [00000000] (null) LR [c01a495c] nand_write_subpage_hwecc+0x74/0x174 Call Trace: [c7951d60] [c7951d64] 0xc7951d64 (unreliable) [c7951da0] [c01a4b6c] nand_write_page+0x88/0x198 [c7951dd0] [c01a5f7c] nand_do_write_ops+0x2f4/0x39c [c7951e40] [c01a61e0] nand_write+0x58/0x84 [c7951e80] [c019e29c] mtdchar_write+0x1dc/0x28c [c7951ef0] [c00aba84] vfs_write+0xcc/0x1ac [c7951f10] [c00ac04c] SyS_write+0x4c/0x90 [c7951f40] [c000cd84] ret_from_syscall+0x0/0x3c --- Exception: c01 at 0x48050ed8 LR = 0x100071b8 Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace 161d3c65a2a15cb8 ]--- Kernel panic - not syncing: Fatal exception [Brian: editorial note - we've applied a previous fix for the driver in question (fsl_elbc_nand) long ago: commit f034d87def51 ("mtd: eLBC NAND: fix subpage write support") but this still makes sense, and it could solve issues on some other unforseen driver.] Cc: Pekon Gupta <pekon.gupta@gmail.com> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | mtd: ftl: use swap() in copy_erase_unit()Fabian Frederick2015-12-181-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use kernel.h macro definition. Thanks to Julia Lawall for Coccinelle scripting support. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | mtd: cfi_cmdset_0002: use swap() in cfi_cmdset_0002()Fabian Frederick2015-12-181-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use kernel.h macro definition. Thanks to Julia Lawall for Coccinelle scripting support. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | mtd: mtk-nor: adjust sequence of trigger function and assignment functionBayi Cheng2015-12-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move write data register before excute command to avoid missing first byte write to nor flash Signed-off-by: Bayi Cheng <bayi.cheng@mediatek.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | mtd: nand: remove unused and buggy get_platform_nandchip() helper functionBoris BREZILLON2015-12-181-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Nobody uses the get_platform_nandchip() helper function which is supposed to return a pointer to a platform_nand_chip struct from an mtd_info pointer. Moreover, this function is buggy since the introduction of the plat_nand layer (chip->priv is now storing a pointer to an intermediate plat_nand_data structure allocated in plat_nand_probe(), and we have no way to retrieve a pointer to the provided platform_nand_chip struct from this plat_nand_data pointer). While we are at it, remove the useless (and buggy, since it's pointing to something stored on the stack) data->chip.priv assignment. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: 711fdf627ce1 ("[MTD] [NAND] platform NAND driver: add driver") Cc: Vitaly Wool <vitalywool@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | mtd: nand: kill the chip->flash_node fieldBoris BREZILLON2015-12-181-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the nand_chip struct directly embeds an mtd_info struct we can get rid of the ->flash_node field and forward set/get_flash_node requests to the MTD layer. As a side effect, we no longer need the mtd_set_of_node() call done in nand_dt_init(). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | mtd: nand: simplify nand_dt_init() usageBoris BREZILLON2015-12-181-10/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | nand_dt_init() function requires 3 arguments where it actually needs one (dn and mtd can both be retrieved from chip). Drop these parameters. Testing for dn != NULL inside nand_dt_init() also helps simplifying the caller code. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-04-23 07:01:47 +0000