summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/ice
Commit message (Collapse)AuthorAgeFilesLines
...
| * ice: use stack variable for virtchnl_supported_rxdidsJacob Keller2024-11-131-16/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ice_vc_query_rxdid() function allocates memory to store the virtchnl_supported_rxdids structure used to communicate the bitmap of supported RXDIDs to a VF. This structure is only 8 bytes in size. The function must hold the allocated length on the stack as well as the pointer to the structure which itself is 8 bytes. Allocating this storage on the heap adds unnecessary overhead including a potential error path that must be handled in case kzalloc fails. Because this structure is so small, we're not saving stack space. Additionally, because we must ensure that we free the allocated memory, the return value from ice_vc_send_msg_to_vf() must also be saved in the stack ret variable. Depending on compiler optimization, this means allocating the 8-byte structure is requiring up to 16-bytes of stack memory! Simplify this function to keep the rxdid variable on the stack, saving memory and removing a potential failure exit path from this function. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * ice: initialize pf->supported_rxdids immediately after loading DDPJacob Keller2024-11-132-18/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pf->supported_rxdids field is used to populate the list of valid RXDIDs that a VF may use when negotiating VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC. The set of supported RXDIDs is dependent on the DDP, and can be read from the GLXFLXP_RXDID_FLAGS register. The PF needs to send this list to the VF upon receiving the VIRTCHNL_OP_GET_SUPPORTED_RXDIDs. It also needs to use this list to validate the requested descriptor ID from the VF when programming the Rx queues. A future update to support VF live migration will also want to validate that the target VF can support the same descriptor ID when migrating. Currently, pf->supported_rxdids is initialized inside the ice_vc_query_rxdid() function. This means that it is only ever initialized if at least one VF actually tries to negotiate VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC. It is also unnecessarily re-initialized every time the VF loads and requests the descriptor list. This worked before because the PF only checks pf->suppported_rxdids when programming the Rx queue if the VF actually negotiates the VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC feature. This will be problematic for VF live migration. We need the list of supported Rx descriptor IDs when migrating. It is possible that no VF on the target PF has ever actually issued a VIRTCHNL_OP_GET_SUPPORTED_RXDIDs. Refactor the driver to initialize pf->supported_rxdids during driver initialization after the DDP is loaded. This is simpler, avoids unnecessary duplicate work, and avoids issues with the live migration process. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * ice: only allow Tx promiscuous for multicastBrett Creeley2024-11-132-10/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently when any VF is trusted and true promiscuous mode is enabled on the PF, the VF will receive all unicast traffic directed to the device's internal switch. This includes traffic external to the NIC and also from other VSI (i.e. VFs). This does not match the expected behavior as unicast traffic should only be visible from external sources in this case. Disable the Tx promiscuous mode bits for unicast promiscuous mode. Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * ice: Add support for persistent NAPI configJoe Damato2024-11-132-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use netif_napi_add_config to assign persistent per-NAPI config when initializing NAPIs. This preserves NAPI config settings when queue counts are adjusted. Tested with an E810-2CQDA2 NIC. Begin by setting the queue count to 4: $ sudo ethtool -L eth4 combined 4 Check the queue settings: $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \ --dump napi-get --json='{"ifindex": 4}' [{'defer-hard-irqs': 0, 'gro-flush-timeout': 0, 'id': 8452, 'ifindex': 4, 'irq': 2782}, {'defer-hard-irqs': 0, 'gro-flush-timeout': 0, 'id': 8451, 'ifindex': 4, 'irq': 2781}, {'defer-hard-irqs': 0, 'gro-flush-timeout': 0, 'id': 8450, 'ifindex': 4, 'irq': 2780}, {'defer-hard-irqs': 0, 'gro-flush-timeout': 0, 'id': 8449, 'ifindex': 4, 'irq': 2779}] Now, set the queue with NAPI ID 8451 to have a gro-flush-timeout of 1111: $ sudo ./tools/net/ynl/cli.py \ --spec Documentation/netlink/specs/netdev.yaml \ --do napi-set --json='{"id": 8451, "gro-flush-timeout": 1111}' None Check that worked: $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \ --dump napi-get --json='{"ifindex": 4}' [{'defer-hard-irqs': 0, 'gro-flush-timeout': 0, 'id': 8452, 'ifindex': 4, 'irq': 2782}, {'defer-hard-irqs': 0, 'gro-flush-timeout': 1111, 'id': 8451, 'ifindex': 4, 'irq': 2781}, {'defer-hard-irqs': 0, 'gro-flush-timeout': 0, 'id': 8450, 'ifindex': 4, 'irq': 2780}, {'defer-hard-irqs': 0, 'gro-flush-timeout': 0, 'id': 8449, 'ifindex': 4, 'irq': 2779}] Now reduce the queue count to 2, which would destroy the queue with NAPI ID 8451: $ sudo ethtool -L eth4 combined 2 Check the queue settings, noting that NAPI ID 8451 is gone: $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \ --dump napi-get --json='{"ifindex": 4}' [{'defer-hard-irqs': 0, 'gro-flush-timeout': 0, 'id': 8450, 'ifindex': 4, 'irq': 2780}, {'defer-hard-irqs': 0, 'gro-flush-timeout': 0, 'id': 8449, 'ifindex': 4, 'irq': 2779}] Now, increase the number of queues back to 4: $ sudo ethtool -L eth4 combined 4 Dump the settings, expecting to see the same NAPI IDs as above and for NAPI ID 8451 to have its gro-flush-timeout set to 1111: $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \ --dump napi-get --json='{"ifindex": 4}' [{'defer-hard-irqs': 0, 'gro-flush-timeout': 0, 'id': 8452, 'ifindex': 4, 'irq': 2782}, {'defer-hard-irqs': 0, 'gro-flush-timeout': 1111, 'id': 8451, 'ifindex': 4, 'irq': 2781}, {'defer-hard-irqs': 0, 'gro-flush-timeout': 0, 'id': 8450, 'ifindex': 4, 'irq': 2780}, {'defer-hard-irqs': 0, 'gro-flush-timeout': 0, 'id': 8449, 'ifindex': 4, 'irq': 2779}] Signed-off-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * ice: support optional flags in signature segment headerPrzemek Kitszel2024-11-132-7/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | An optional flag field has been added to the signature segment header. The field contains two flags, a "valid" bit, and a "last segment" bit that indicates whether the segment is the last segment that will be sent to firmware. If the flag field's valid bit is NOT set, then as was done before, assume that this is the last segment being downloaded. However, if the flag field's valid bit IS set, then use the last segment flag to determine if this segment is the last segment to download. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Co-developed-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * ice: refactor "last" segment of DDP pkgPrzemek Kitszel2024-11-131-137/+151
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add ice_ddp_send_hunk() that buffers "sent FW hunk" calls to AQ in order to mark the "last" one in more elegant way. Next commit will add even more complicated "sent FW" flow, so it's better to untangle a bit before. Note that metadata buffers were not skipped for NOT-@indicate_last segments, this is fixed now. Minor: + use ice_is_buffer_metadata() instead of open coding it in ice_dwnld_cfg_bufs(); + ice_dwnld_cfg_bufs_no_lock() + dependencies were moved up a bit to have better git-diff, as this function was rewritten (in terms of git-blame) CC: Paul Greenwalt <paul.greenwalt@intel.com> CC: Dan Nowlin <dan.nowlin@intel.com> CC: Ahmed Zaki <ahmed.zaki@intel.com> CC: Simon Horman <horms@kernel.org> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * ice: extend dump serdes equalizer values featureMateusz Polchlopek2024-11-133-0/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extend the work done in commit 70838938e89c ("ice: Implement driver functionality to dump serdes equalizer values") by adding the new set of Rx registers that can be read using command: $ ethtool -d interface_name Rx equalization parameters are E810 PHY registers used by end user to gather information about configuration and status to debug link and connection issues in the field. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * ice: rework of dump serdes equalizer values featureMateusz Polchlopek2024-11-132-77/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Refactor function ice_get_tx_rx_equa() to iterate over new table of params instead of multiple calls to ice_aq_get_phy_equalization(). Subsequent commit will extend that function by add more serdes equalizer values to dump. Shorten the fields of struct ice_serdes_equalization_to_ethtool for readability purposes. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | ndo_fdb_del: Add a parameter to report whether notification was sentPetr Machata2024-11-151-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | In a similar fashion to ndo_fdb_add, which was covered in the previous patch, add the bool *notified argument to ndo_fdb_del. Callees that send a notification on their own set the flag to true. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/06b1acf4953ef0a5ed153ef1f32d7292044f2be6.1731589511.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | ndo_fdb_add: Add a parameter to report whether notification was sentPetr Machata2024-11-151-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently when FDB entries are added to or deleted from a VXLAN netdevice, the VXLAN driver emits one notification, including the VXLAN-specific attributes. The core however always sends a notification as well, a generic one. Thus two notifications are unnecessarily sent for these operations. A similar situation comes up with bridge driver, which also emits notifications on its own: # ip link add name vx type vxlan id 1000 dstport 4789 # bridge monitor fdb & [1] 1981693 # bridge fdb add de:ad:be:ef:13:37 dev vx self dst 192.0.2.1 de:ad:be:ef:13:37 dev vx dst 192.0.2.1 self permanent de:ad:be:ef:13:37 dev vx self permanent In order to prevent this duplicity, add a paremeter to ndo_fdb_add, bool *notified. The flag is primed to false, and if the callee sends a notification on its own, it sets it to true, thus informing the core that it should not generate another notification. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/cbf6ae8195e85cbf922f8058ce4eba770f3b71ed.1731589511.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2024-11-073-3/+7
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cross-merge networking fixes after downstream PR (net-6.12-rc7). Conflicts: drivers/net/ethernet/freescale/enetc/enetc_pf.c e15c5506dd39 ("net: enetc: allocate vf_state during PF probes") 3774409fd4c6 ("net: enetc: build enetc_pf_common.c as a separate module") https://lore.kernel.org/20241105114100.118bd35e@canb.auug.org.au Adjacent changes: drivers/net/ethernet/ti/am65-cpsw-nuss.c de794169cf17 ("net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7") 4a7b2ba94a59 ("net: ethernet: ti: am65-cpsw: Use tstats instead of open coded version") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * ice: change q_index variable type to s16 to store -1 valueMateusz Polchlopek2024-11-042-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix Flow Director not allowing to re-map traffic to 0th queue when action is configured to drop (and vice versa). The current implementation of ethtool callback in the ice driver forbids change Flow Director action from 0 to -1 and from -1 to 0 with an error, e.g: # ethtool -U eth2 flow-type tcp4 src-ip 1.1.1.1 loc 1 action 0 # ethtool -U eth2 flow-type tcp4 src-ip 1.1.1.1 loc 1 action -1 rmgr: Cannot insert RX class rule: Invalid argument We set the value of `u16 q_index = 0` at the beginning of the function ice_set_fdir_input_set(). In case of "drop traffic" action (which is equal to -1 in ethtool) we store the 0 value. Later, when want to change traffic rule to redirect to queue with index 0 it returns an error caused by duplicate found. Fix this behaviour by change of the type of field `q_index` from u16 to s16 in `struct ice_fdir_fltr`. This allows to store -1 in the field in case of "drop traffic" action. What is more, change the variable type in the function ice_set_fdir_input_set() and assign at the beginning the new `#define ICE_FDIR_NO_QUEUE_IDX` which is -1. Later, if the action is set to another value (point specific queue index) the variable value is overwritten in the function. Fixes: cac2a27cd9ab ("ice: Support IPv4 Flow Director filters") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * ice: Fix use after free during unload with ports in bridgeMarcin Szycik2024-11-041-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Unloading the ice driver while switchdev port representors are added to a bridge can lead to kernel panic. Reproducer: modprobe ice devlink dev eswitch set $PF1_PCI mode switchdev ip link add $BR type bridge ip link set $BR up echo 2 > /sys/class/net/$PF1/device/sriov_numvfs sleep 2 ip link set $PF1 master $BR ip link set $VF1_PR master $BR ip link set $VF2_PR master $BR ip link set $PF1 up ip link set $VF1_PR up ip link set $VF2_PR up ip link set $VF1 up rmmod irdma ice When unloading the driver, ice_eswitch_detach() is eventually called as part of VF freeing. First, it removes a port representor from xarray, then unregister_netdev() is called (via repr->ops.rem()), finally representor is deallocated. The problem comes from the bridge doing its own deinit at the same time. unregister_netdev() triggers a notifier chain, resulting in ice_eswitch_br_port_deinit() being called. It should set repr->br_port = NULL, but this does not happen since repr has already been removed from xarray and is not found. Regardless, it finishes up deallocating br_port. At this point, repr is still not freed and an fdb event can happen, in which ice_eswitch_br_fdb_event_work() takes repr->br_port and tries to use it, which causes a panic (use after free). Note that this only happens with 2 or more port representors added to the bridge, since with only one representor port, the bridge deinit is slightly different (ice_eswitch_br_port_deinit() is called via ice_eswitch_br_ports_flush(), not ice_eswitch_br_port_unlink()). Trace: Oops: general protection fault, probably for non-canonical address 0xf129010fd1a93284: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: maybe wild-memory-access in range [0x8948287e8d499420-0x8948287e8d499427] (...) Workqueue: ice_bridge_wq ice_eswitch_br_fdb_event_work [ice] RIP: 0010:__rht_bucket_nested+0xb4/0x180 (...) Call Trace: (...) ice_eswitch_br_fdb_find+0x3fa/0x550 [ice] ? __pfx_ice_eswitch_br_fdb_find+0x10/0x10 [ice] ice_eswitch_br_fdb_event_work+0x2de/0x1e60 [ice] ? __schedule+0xf60/0x5210 ? mutex_lock+0x91/0xe0 ? __pfx_ice_eswitch_br_fdb_event_work+0x10/0x10 [ice] ? ice_eswitch_br_update_work+0x1f4/0x310 [ice] (...) A workaround is available: brctl setageing $BR 0, which stops the bridge from adding fdb entries altogether. Change the order of operations in ice_eswitch_detach(): move the call to unregister_netdev() before removing repr from xarray. This way repr->br_port will be correctly set to NULL in ice_eswitch_br_port_deinit(), preventing a panic. Fixes: fff292b47ac1 ("ice: add VF representors one by one") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | dim: pass dim_sample to net_dim() by referenceCaleb Sander Mateos2024-11-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | net_dim() is currently passed a struct dim_sample argument by value. struct dim_sample is 24 bytes. Since this is greater 16 bytes, x86-64 passes it on the stack. All callers have already initialized dim_sample on the stack, so passing it by value requires pushing a duplicated copy to the stack. Either witing to the stack and immediately reading it, or perhaps dereferencing addresses relative to the stack pointer in a chain of push instructions, seems to perform quite poorly. In a heavy TCP workload, mlx5e_handle_rx_dim() consumes 3% of CPU time, 94% of which is attributed to the first push instruction to copy dim_sample on the stack for the call to net_dim(): // Call ktime_get() 0.26 |4ead2: call 4ead7 <mlx5e_handle_rx_dim+0x47> // Pass the address of struct dim in %rdi |4ead7: lea 0x3d0(%rbx),%rdi // Set dim_sample.pkt_ctr |4eade: mov %r13d,0x8(%rsp) // Set dim_sample.byte_ctr |4eae3: mov %r12d,0xc(%rsp) // Set dim_sample.event_ctr 0.15 |4eae8: mov %bp,0x10(%rsp) // Duplicate dim_sample on the stack 94.16 |4eaed: push 0x10(%rsp) 2.79 |4eaf1: push 0x10(%rsp) 0.07 |4eaf5: push %rax // Call net_dim() 0.21 |4eaf6: call 4eafb <mlx5e_handle_rx_dim+0x6b> To allow the caller to reuse the struct dim_sample already on the stack, pass the struct dim_sample by reference to net_dim(). Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Arthur Kiyanovski <akiyano@amazon.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Link: https://patch.msgid.link/20241031002326.3426181-2-csander@purestorage.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2024-10-314-2/+96
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cross-merge networking fixes after downstream PR (net-6.12-rc6). Conflicts: drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c cbe84e9ad5e2 ("wifi: iwlwifi: mvm: really send iwl_txpower_constraints_cmd") 188a1bf89432 ("wifi: mac80211: re-order assigning channel in activate links") https://lore.kernel.org/all/20241028123621.7bbb131b@canb.auug.org.au/ net/mac80211/cfg.c c4382d5ca1af ("wifi: mac80211: update the right link for tx power") 8dd0498983ee ("wifi: mac80211: Fix setting txpower with emulate_chanctx") drivers/net/ethernet/intel/ice/ice_ptp_hw.h 6e58c3310622 ("ice: fix crash on probe for DPLL enabled E810 LOM") e4291b64e118 ("ice: Align E810T GPIO to other products") ebb2693f8fbd ("ice: Read SDP section from NVM for pin definitions") ac532f4f4251 ("ice: Cleanup unused declarations") https://lore.kernel.org/all/20241030120524.1ee1af18@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * ice: fix crash on probe for DPLL enabled E810 LOMArkadiusz Kubalewski2024-10-293-2/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The E810 Lan On Motherboard (LOM) design is vendor specific. Intel provides the reference design, but it is up to vendor on the final product design. For some cases, like Linux DPLL support, the static values defined in the driver does not reflect the actual LOM design. Current implementation of dpll pins is causing the crash on probe of the ice driver for such DPLL enabled E810 LOM designs: WARNING: (...) at drivers/dpll/dpll_core.c:495 dpll_pin_get+0x2c4/0x330 ... Call Trace: <TASK> ? __warn+0x83/0x130 ? dpll_pin_get+0x2c4/0x330 ? report_bug+0x1b7/0x1d0 ? handle_bug+0x42/0x70 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? dpll_pin_get+0x117/0x330 ? dpll_pin_get+0x2c4/0x330 ? dpll_pin_get+0x117/0x330 ice_dpll_get_pins.isra.0+0x52/0xe0 [ice] ... The number of dpll pins enabled by LOM vendor is greater than expected and defined in the driver for Intel designed NICs, which causes the crash. Prevent the crash and allow generic pin initialization within Linux DPLL subsystem for DPLL enabled E810 LOM designs. Newly designed solution for described issue will be based on "per HW design" pin initialization. It requires pin information dynamically acquired from the firmware and is already in progress, planned for next-tree only. Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Reviewed-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
| * ice: block SF port creation in legacy modeMichal Swiatkowski2024-10-291-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no support for SF in legacy mode. Reflect it in the code. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Fixes: eda69d654c7e ("ice: add basic devlink subfunctions support") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2024-10-1013-76/+137
|\| | | | | | | | | | | | | | | Cross-merge networking fixes after downstream PR (net-6.12-rc3). No conflicts and no adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * ice: Fix increasing MSI-X on VFMarcin Szycik2024-10-083-5/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Increasing MSI-X value on a VF leads to invalid memory operations. This is caused by not reallocating some arrays. Reproducer: modprobe ice echo 0 > /sys/bus/pci/devices/$PF_PCI/sriov_drivers_autoprobe echo 1 > /sys/bus/pci/devices/$PF_PCI/sriov_numvfs echo 17 > /sys/bus/pci/devices/$VF0_PCI/sriov_vf_msix_count Default MSI-X is 16, so 17 and above triggers this issue. KASAN reports: BUG: KASAN: slab-out-of-bounds in ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice] Read of size 8 at addr ffff8888b937d180 by task bash/28433 (...) Call Trace: (...) ? ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice] kasan_report+0xed/0x120 ? ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice] ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice] ice_vsi_cfg_def+0x3360/0x4770 [ice] ? mutex_unlock+0x83/0xd0 ? __pfx_ice_vsi_cfg_def+0x10/0x10 [ice] ? __pfx_ice_remove_vsi_lkup_fltr+0x10/0x10 [ice] ice_vsi_cfg+0x7f/0x3b0 [ice] ice_vf_reconfig_vsi+0x114/0x210 [ice] ice_sriov_set_msix_vec_count+0x3d0/0x960 [ice] sriov_vf_msix_count_store+0x21c/0x300 (...) Allocated by task 28201: (...) ice_vsi_cfg_def+0x1c8e/0x4770 [ice] ice_vsi_cfg+0x7f/0x3b0 [ice] ice_vsi_setup+0x179/0xa30 [ice] ice_sriov_configure+0xcaa/0x1520 [ice] sriov_numvfs_store+0x212/0x390 (...) To fix it, use ice_vsi_rebuild() instead of ice_vf_reconfig_vsi(). This causes the required arrays to be reallocated taking the new queue count into account (ice_vsi_realloc_stat_arrays()). Set req_txq and req_rxq before ice_vsi_rebuild(), so that realloc uses the newly set queue count. Additionally, ice_vsi_rebuild() does not remove VSI filters (ice_fltr_remove_all()), so ice_vf_init_host_cfg() is no longer necessary. Reported-by: Jacob Keller <jacob.e.keller@intel.com> Fixes: 2a2cb4c6c181 ("ice: replace ice_vf_recreate_vsi() with ice_vf_reconfig_vsi()") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * ice: Flush FDB entries before resetWojciech Drewek2024-10-083-22/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Triggering the reset while in switchdev mode causes errors[1]. Rules are already removed by this time because switch content is flushed in case of the reset. This means that rules were deleted from HW but SW still thinks they exist so when we get SWITCHDEV_FDB_DEL_TO_DEVICE notification we try to delete not existing rule. We can avoid these errors by clearing the rules early in the reset flow before they are removed from HW. Switchdev API will get notified that the rule was removed so we won't get SWITCHDEV_FDB_DEL_TO_DEVICE notification. Remove unnecessary ice_clear_sw_switch_recipes. [1] ice 0000:01:00.0: Failed to delete FDB forward rule, err: -2 ice 0000:01:00.0: Failed to delete FDB guard rule, err: -2 Fixes: 7c945a1a8e5f ("ice: Switchdev FDB events support") Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * ice: Fix netif_is_ice() in Safe ModeMarcin Szycik2024-10-081-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | netif_is_ice() works by checking the pointer to netdev ops. However, it only checks for the default ice_netdev_ops, not ice_netdev_safe_mode_ops, so in Safe Mode it always returns false, which is unintuitive. While it doesn't look like netif_is_ice() is currently being called anywhere in Safe Mode, this could change and potentially lead to unexpected behaviour. Fixes: df006dd4b1dc ("ice: Add initial support framework for LAG") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * ice: Fix entering Safe ModeMarcin Szycik2024-10-081-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If DDP package is missing or corrupted, the driver should enter Safe Mode. Instead, an error is returned and probe fails. To fix this, don't exit init if ice_init_ddp_config() returns an error. Repro: * Remove or rename DDP package (/lib/firmware/intel/ice/ddp/ice.pkg) * Load ice Fixes: cc5776fe1832 ("ice: Enable switching default Tx scheduler topology") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * Merge branch '100GbE' of ↵Jakub Kicinski2024-10-0310-45/+117
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-09-30 (ice, idpf) This series contains updates to ice and idpf drivers: For ice: Michal corrects setting of dst VSI on LAN filters and adds clearing of port VLAN configuration during reset. Gui-Dong Han corrects failures to decrement refcount in some error paths. Przemek resolves a memory leak in ice_init_tx_topology(). Arkadiusz prevents setting of DPLL_PIN_STATE_SELECTABLE to an improper value. Dave stops clearing of VLAN tracking bit to allow for VLANs to be properly restored after reset. For idpf: Ahmed sets uninitialized dyn_ctl_intrvl_s value. Josh corrects use and reporting of mailbox size. Larysa corrects order of function calls during de-initialization. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: idpf: deinit virtchnl transaction manager after vport and vectors idpf: use actual mbx receive payload length idpf: fix VF dynamic interrupt ctl register initialization ice: fix VLAN replay after reset ice: disallow DPLL_PIN_STATE_SELECTABLE for dpll output pins ice: fix memleak in ice_init_tx_topology() ice: clear port vlan config during reset ice: Fix improper handling of refcount in ice_sriov_set_msix_vec_count() ice: Fix improper handling of refcount in ice_dpll_init_rclk_pins() ice: set correct dst VSI in only LAN filters ==================== Link: https://patch.msgid.link/20240930223601.3137464-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| | * ice: fix VLAN replay after resetDave Ertman2024-09-301-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a bug currently when there are more than one VLAN defined and any reset that affects the PF is initiated, after the reset rebuild no traffic will pass on any VLAN but the last one created. This is caused by the iteration though the VLANs during replay each clearing the vsi_map bitmap of the VSI that is being replayed. The problem is that during rhe replay, the pointer to the vsi_map bitmap is used by each successive vlan to determine if it should be replayed on this VSI. The logic was that the replay of the VLAN would replace the bit in the map before the next VLAN would iterate through. But, since the replay copies the old bitmap pointer to filt_replay_rules and creates a new one for the recreated VLANS, it does not do this, and leaves the old bitmap broken to be used to replay the remaining VLANs. Since the old bitmap will be cleaned up in post replay cleanup, there is no need to alter it and break following VLAN replay, so don't clear the bit. Fixes: 334cb0626de1 ("ice: Implement VSI replay framework") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| | * ice: disallow DPLL_PIN_STATE_SELECTABLE for dpll output pinsArkadiusz Kubalewski2024-09-301-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the user may request DPLL_PIN_STATE_SELECTABLE for an output pin, and this would actually set the DISCONNECTED state instead. It doesn't make any sense. SELECTABLE is valid only in case of input pins (on AUTOMATIC type dpll), where dpll itself would select best valid input. For the output pin only CONNECTED/DISCONNECTED are expected. Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| | * ice: fix memleak in ice_init_tx_topology()Przemek Kitszel2024-09-303-39/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix leak of the FW blob (DDP pkg). Make ice_cfg_tx_topo() const-correct, so ice_init_tx_topology() can avoid copying whole FW blob. Copy just the topology section, and only when needed. Reuse the buffer allocated for the read of the current topology. This was found by kmemleak, with the following trace for each PF: [<ffffffff8761044d>] kmemdup_noprof+0x1d/0x50 [<ffffffffc0a0a480>] ice_init_ddp_config+0x100/0x220 [ice] [<ffffffffc0a0da7f>] ice_init_dev+0x6f/0x200 [ice] [<ffffffffc0a0dc49>] ice_init+0x29/0x560 [ice] [<ffffffffc0a10c1d>] ice_probe+0x21d/0x310 [ice] Constify ice_cfg_tx_topo() @buf parameter. This cascades further down to few more functions. Fixes: cc5776fe1832 ("ice: Enable switching default Tx scheduler topology") CC: Larysa Zaremba <larysa.zaremba@intel.com> CC: Jacob Keller <jacob.e.keller@intel.com> CC: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> CC: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| | * ice: clear port vlan config during resetMichal Swiatkowski2024-09-303-0/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 2a2cb4c6c181 ("ice: replace ice_vf_recreate_vsi() with ice_vf_reconfig_vsi()") VF VSI is only reconfigured instead of recreated. The context configuration from previous setting is still the same. If any of the config needs to be cleared it needs to be cleared explicitly. Previously there was assumption that port vlan will be cleared automatically. Now, when VSI is only reconfigured we have to do it in the code. Not clearing port vlan configuration leads to situation when the driver VSI config is different than the VSI config in HW. Traffic can't be passed after setting and clearing port vlan, because of invalid VSI config in HW. Example reproduction: > ip a a dev $(VF) $(VF_IP_ADDRESS) > ip l s dev $(VF) up > ping $(VF_IP_ADDRESS) ping is working fine here > ip link set eth5 vf 0 vlan 100 > ip link set eth5 vf 0 vlan 0 > ping $(VF_IP_ADDRESS) ping isn't working Fixes: 2a2cb4c6c181 ("ice: replace ice_vf_recreate_vsi() with ice_vf_reconfig_vsi()") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Piotr Tyda <piotr.tyda@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| | * ice: Fix improper handling of refcount in ice_sriov_set_msix_vec_count()Gui-Dong Han2024-09-301-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch addresses an issue with improper reference count handling in the ice_sriov_set_msix_vec_count() function. First, the function calls ice_get_vf_by_id(), which increments the reference count of the vf pointer. If the subsequent call to ice_get_vf_vsi() fails, the function currently returns an error without decrementing the reference count of the vf pointer, leading to a reference count leak. The correct behavior, as implemented in this patch, is to decrement the reference count using ice_put_vf(vf) before returning an error when vsi is NULL. Second, the function calls ice_sriov_get_irqs(), which sets vf->first_vector_idx. If this call returns a negative value, indicating an error, the function returns an error without decrementing the reference count of the vf pointer, resulting in another reference count leak. The patch addresses this by adding a call to ice_put_vf(vf) before returning an error when vf->first_vector_idx < 0. This bug was identified by an experimental static analysis tool developed by our team. The tool specializes in analyzing reference count operations and identifying potential mismanagement of reference counts. In this case, the tool flagged the missing decrement operation as a potential issue, leading to this patch. Fixes: 4035c72dc1ba ("ice: reconfig host after changing MSI-X on VF") Fixes: 4d38cb44bd32 ("ice: manage VFs MSI-X using resource tracking") Cc: stable@vger.kernel.org Signed-off-by: Gui-Dong Han <hanguidong02@outlook.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| | * ice: Fix improper handling of refcount in ice_dpll_init_rclk_pins()Gui-Dong Han2024-09-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch addresses a reference count handling issue in the ice_dpll_init_rclk_pins() function. The function calls ice_dpll_get_pins(), which increments the reference count of the relevant resources. However, if the condition WARN_ON((!vsi || !vsi->netdev)) is met, the function currently returns an error without properly releasing the resources acquired by ice_dpll_get_pins(), leading to a reference count leak. To resolve this, the check has been moved to the top of the function. This ensures that the function verifies the state before any resources are acquired, avoiding the need for additional resource management in the error path. This bug was identified by an experimental static analysis tool developed by our team. The tool specializes in analyzing reference count operations and detecting potential issues where resources are not properly managed. In this case, the tool flagged the missing release operation as a potential problem, which led to the development of this patch. Fixes: d7999f5ea64b ("ice: implement dpll interface to control cgu") Cc: stable@vger.kernel.org Signed-off-by: Gui-Dong Han <hanguidong02@outlook.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| | * ice: set correct dst VSI in only LAN filtersMichal Swiatkowski2024-09-301-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The filters set that will reproduce the problem: $ tc filter add dev $VF0_PR ingress protocol arp prio 0 flower \ skip_sw dst_mac ff:ff:ff:ff:ff:ff action mirred egress \ redirect dev $PF0 $ tc filter add dev $VF0_PR ingress protocol arp prio 0 flower \ skip_sw dst_mac ff:ff:ff:ff:ff:ff src_mac 52:54:00:00:00:10 \ action mirred egress mirror dev $VF1_PR Expected behaviour is to set all broadcast from VF0 to the LAN. If the src_mac match the value from filters, send packet to LAN and to VF1. In this case both LAN_EN and LB_EN flags in switch is set in case of packet matching both filters. As dst VSI for the only LAN enable bit is PF VSI, the packet is being seen on PF. To fix this change dst VSI to the source VSI. It will block receiving any packet even when LB_EN is set by switch, because local loopback is clear on VF VSI during normal operation. Side note: if the second filters action is redirect instead of mirror LAN_EN is clear, because switch is AND-ing LAN_EN from each matched filters and OR-ing LB_EN. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Fixes: 73b483b79029 ("ice: Manage act flags for switchdev offloads") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | | Merge branch 'net-introduce-tx-h-w-shaping-api'Jakub Kicinski2024-10-1010-0/+395
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Paolo Abeni says: ==================== net: introduce TX H/W shaping API We have a plurality of shaping-related drivers API, but none flexible enough to meet existing demand from vendors[1]. This series introduces new device APIs to configure in a flexible way TX H/W shaping. The new functionalities are exposed via a newly defined generic netlink interface and include introspection capabilities. Some self-tests are included, on top of a dummy netdevsim implementation. Finally a basic implementation for the iavf driver is provided. Some usage examples: * Configure shaping on a given queue: ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/shaper.yaml \ --do set --json '{"ifindex": '$IFINDEX', "shaper": {"handle": {"scope": "queue", "id":'$QUEUEID'}, "bw-max": 2000000}}' * Container B/W sharing The orchestration infrastructure wants to group the container-related queues under a RR scheduling and limit the aggregate bandwidth: ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/shaper.yaml \ --do group --json '{"ifindex": '$IFINDEX', "leaves": [ {"handle": {"scope": "queue", "id":'$QID1'}, "weight": '$W1'}, {"handle": {"scope": "queue", "id":'$QID2'}, "weight": '$W2'}], {"handle": {"scope": "queue", "id":'$QID3'}, "weight": '$W3'}], "handle": {"scope":"node"}, "bw-max": 10000000}' {'ifindex': $IFINDEX, 'handle': {'scope': 'node', 'id': 0}} Q1 \ \ Q2 -- node 0 ------- netdev / (bw-max: 10M) Q3 / * Delegation A containers wants to limit the aggregate B/W bandwidth of 2 of the 3 queues it owns - the starting configuration is the one from the previous point: SPEC=Documentation/netlink/specs/net_shaper.yaml ./tools/net/ynl/cli.py --spec $SPEC \ --do group --json '{"ifindex": '$IFINDEX', "leaves": [ {"handle": {"scope": "queue", "id":'$QID1'}, "weight": '$W1'}, {"handle": {"scope": "queue", "id":'$QID2'}, "weight": '$W2'}], "handle": {"scope": "node"}, "bw-max": 5000000 }' {'ifindex': $IFINDEX, 'handle': {'scope': 'node', 'id': 1}} Q1 -- node 1 --------\ / (bw-max: 5M) \ Q2 / node 0 ------- netdev /(bw-max: 10M) Q3 ------------------/ In a group operation, when prior to the op itself, the leaves have different parents, the user must specify the parent handle for the group. I.e., starting from the previous config: ./tools/net/ynl/cli.py --spec $SPEC \ --do group --json '{"ifindex": '$IFINDEX', "leaves": [ {"handle": {"scope": "queue", "id":'$QID1'}, "weight": '$W1'}, {"handle": {"scope": "queue", "id":'$QID3'}, "weight": '$W3'}], "handle": {"scope": "node"}, "bw-max": 3000000 }' Netlink error: Invalid argument nl_len = 96 (80) nl_flags = 0x300 nl_type = 2 error: -22 extack: {'msg': 'All the leaves shapers must have the same old parent'} ./tools/net/ynl/cli.py --spec $SPEC \ --do group --json '{"ifindex": '$IFINDEX', "leaves": [ {"handle": {"scope": "queue", "id":'$QID1'}, "weight": '$W1'}, {"handle": {"scope": "queue", "id":'$QID3'}, "weight": '$W3'}], "handle": {"scope": "node"}, "parent": {"scope": "node", "id": 1}, "bw-max": 3000000 } {'ifindex': $IFINDEX, 'handle': {'scope': 'node', 'id': 2}} Q1 -- node 2 --- /(bw-max:3M)\ Q3 / \ ---- node 1 \ / (bw-max: 5M)\ Q2 node 0 ------- netdev (bw-max: 10M) * Cleanup: Still starting from config 1To delete a single queue shaper ./tools/net/ynl/cli.py --spec $SPEC --do delete --json \ '{"ifindex": '$IFINDEX', "handle": {"scope": "queue", "id":'$QID3'}}' Q1 -- node 2 --- (bw-max:3M)\ \ ---- node 1 \ / (bw-max: 5M)\ Q2 node 0 ------- netdev (bw-max: 10M) Deleting a node shaper relinks all its leaves to the node's parent: ./tools/net/ynl/cli.py --spec $SPEC --do delete --json \ '{"ifindex": '$IFINDEX', "handle": {"scope": "node", "id":2}}' Q1 ---\ \ node 1----- \ / (bw-max: 5M)\ Q2----/ node 0 ------- netdev (bw-max: 10M) Deleting the last shaper under a node shaper deletes the node, too: ./tools/net/ynl/cli.py --spec $SPEC --do delete --json \ '{"ifindex": '$IFINDEX', "handle": {"scope": "queue", "id":'$QID1'}}' ./tools/net/ynl/cli.py --spec $SPEC --do delete --json \ '{"ifindex": '$IFINDEX', "handle": {"scope": "queue", "id":'$QID2'}}' ./tools/net/ynl/cli.py --spec $SPEC --do get --json \ '{"ifindex": '$IFINDEX', "handle": {"scope": "node", "id": 1}}' Netlink error: No such file or directory nl_len = 44 (28) nl_flags = 0x300 nl_type = 2 error: -2 extack: {'bad-attr': '.handle'} Such delete recurses on parents that are left over with no leaves: ./tools/net/ynl/cli.py --spec $SPEC --do get --json \ '{"ifindex": '$IFINDEX', "handle": {"scope": "node", "id": 0}}' Netlink error: No such file or directory nl_len = 44 (28) nl_flags = 0x300 nl_type = 2 error: -2 extack: {'bad-attr': '.handle'} v8: https://lore.kernel.org/cover.1727704215.git.pabeni@redhat.com v7: https://lore.kernel.org/cover.1725919039.git.pabeni@redhat.com v6: https://lore.kernel.org/cover.1725457317.git.pabeni@redhat.com v5: https://lore.kernel.org/cover.1724944116.git.pabeni@redhat.com v4: https://lore.kernel.org/cover.1724165948.git.pabeni@redhat.com v3: https://lore.kernel.org/cover.1722357745.git.pabeni@redhat.com RFC v2: https://lore.kernel.org/cover.1721851988.git.pabeni@redhat.com RFC v1: https://lore.kernel.org/cover.1719518113.git.pabeni@redhat.com ==================== Link: https://patch.msgid.link/cover.1728460186.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * | | ice: Support VF queue rate limit and quanta size configurationWenjun Wu2024-10-1010-0/+395
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support to configure VF queue rate limit and quanta size. For quanta size configuration, the quanta profiles are divided evenly by PF numbers. For each port, the first quanta profile is reserved for default. When VF is asked to set queue quanta size, PF will search for an available profile, change the fields and assigned this profile to the queue. Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Link: https://patch.msgid.link/fddefc2c1ec3ab32b241ce444af401da19e834dd.1728460186.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | | | ice: Cleanup unused declarationsYue Haibing2024-10-085-14/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit fff292b47ac1 ("ice: add VF representors one by one") ice_eswitch_configure() is not used anymore. Commit 1b8f15b64a00 ("ice: refactor filter functions") removed ice_vsi_cfg_mac_fltr() but leave declaration. Commit a24b4c6e9aab ("ice: xsk: Do not convert to buff to frame for XDP_TX") leave ice_xmit_xdp_buff() declaration. Commit 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C products") declared ice_phy_cfg_{rx,tx}_offset_eth56g(), commit a1ffafb0b4a4 ("ice: Support configuring the device to Double VLAN Mode") declared ice_pkg_buf_get_free_space(), and commit 8a3a565ff210 ("ice: add admin commands to access cgu configuration") declared ice_is_pca9575_present(), but all these never be implemented. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | | | ice: Use common error handling code in two functionsMarkus Elfring2024-10-081-16/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add jump targets so that a bit of exception handling can be better reused at the end of two function implementations. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | | | ice: Make use of assign_bit() APIHongbo Li2024-10-081-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have for some time the assign_bit() API to replace open coded if (foo) set_bit(n, bar); else clear_bit(n, bar); Use this API to clean the code. No functional change intended. Signed-off-by: Hongbo Li <lihongbo22@huawei.com> Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | | | ice: store max_frame and rx_buf_len only in ice_rx_ringJacob Keller2024-10-084-24/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The max_frame and rx_buf_len fields of the VSI set the maximum frame size for packets on the wire, and configure the size of the Rx buffer. In the hardware, these are per-queue configuration. Most VSI types use a simple method to determine the size of the buffers for all queues. However, VFs may potentially configure different values for each queue. While the Linux iAVF driver does not do this, it is allowed by the virtchnl interface. The current virtchnl code simply sets the per-VSI fields inbetween calls to ice_vsi_cfg_single_rxq(). This technically works, as these fields are only ever used when programming the Rx ring, and otherwise not checked again. However, it is confusing to maintain. The Rx ring also already has an rx_buf_len field in order to access the buffer length in the hotpath. It also has extra unused bytes in the ring structure which we can make use of to store the maximum frame size. Drop the VSI max_frame and rx_buf_len fields. Add max_frame to the Rx ring, and slightly re-order rx_buf_len to better fit into the gaps in the structure layout. Change the ice_vsi_cfg_frame_size function so that it writes to the ring fields. Call this function once per ring in ice_vsi_cfg_rxqs(). This is done over calling it inside the ice_vsi_cfg_rxq(), because ice_vsi_cfg_rxq() is called in the virtchnl flow where the max_frame and rx_buf_len have already been configured. Change the accesses for rx_buf_len and max_frame to all point to the ring structure. This has the added benefit that ice_vsi_cfg_rxq() no longer has the surprise side effect of updating ring->rx_buf_len based on the VSI field. Update the virtchnl ice_vc_cfg_qs_msg() function to set the ring values directly, and drop references to the removed VSI fields. This now makes the VF logic clear, as the ring fields are obviously per-queue. This reduces the required cognitive load when reasoning about this logic. Note that removing the VSI fields does leave a 4 byte gap, but the ice_vsi structure has many gaps, and its layout is not as critical in the hot path. The structure may benefit from a more thorough repacking, but no attempt was made in this change. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | | | ice: consistently use q_idx in ice_vc_cfg_qs_msg()Jacob Keller2024-10-081-11/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ice_vc_cfg_qs_msg() function is used to configure VF queues in response to a VIRTCHNL_OP_CONFIG_VSI_QUEUES command. The virtchnl command contains an array of queue pair data for configuring Tx and Rx queues. This data includes a queue ID. When configuring the queues, the driver generally uses this queue ID to determine which Tx and Rx ring to program. However, a handful of places use the index into the queue pair data from the VF. While most VF implementations appear to send this data in order, it is not mandated by the virtchnl and it is not verified that the queue pair data comes in order. Fix the driver to consistently use the q_idx field instead of the 'i' iterator value when accessing the rings. For the Rx case, introduce a local ring variable to keep lines short. Fixes: 7ad15440acf8 ("ice: Refactor VIRTCHNL_OP_CONFIG_VSI_QUEUES handling") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | | | ice: add E830 HW VF mailbox message limit supportPaul Greenwalt2024-10-089-13/+96
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | E830 adds hardware support to prevent the VF from overflowing the PF mailbox with VIRTCHNL messages. E830 will use the hardware feature (ICE_F_MBX_LIMIT) instead of the software solution ice_is_malicious_vf(). To prevent a VF from overflowing the PF, the PF sets the number of messages per VF that can be in the PF's mailbox queue (ICE_MBX_OVERFLOW_WATERMARK). When the PF processes a message from a VF, the PF decrements the per VF message count using the E830_MBX_VF_DEC_TRIG register. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | | | ice: Implement ethtool reset supportWojciech Drewek2024-10-081-0/+77
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable ethtool reset support. Ethtool reset flags are mapped to the E810 reset type: PF reset: $ ethtool --reset <ethX> irq dma filter offload CORE reset: $ ethtool --reset <ethX> irq-shared dma-shared filter-shared \ offload-shared ram-shared GLOBAL reset: $ ethtool --reset <ethX> irq-shared dma-shared filter-shared \ offload-shared mac-shared phy-shared ram-shared Calling the same set of flags as in PF reset case on port representor triggers VF reset. Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
* | | Merge branch '100GbE' of ↵Jakub Kicinski2024-10-0410-954/+910
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-10-01 (ice) This series contains updates to ice driver only. Karol cleans up current PTP GPIO pin handling, fixes minor bugs, refactors implementation for all products, introduces SDP (Software Definable Pins) for E825C and implements reading SDP section from NVM for E810 products. Sergey replaces multiple aux buses and devices used in the PTP support code with struct ice_adapter holding the necessary shared data. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: Drop auxbus use for PTP to finalize ice_adapter move ice: Use ice_adapter for PTP shared data instead of auxdev ice: Initial support for E825C hardware in ice_adapter ice: Add ice_get_ctrl_ptp() wrapper to simplify the code ice: Introduce ice_get_phy_model() wrapper ice: Enable 1PPS out from CGU for E825C products ice: Read SDP section from NVM for pin definitions ice: Disable shared pin on E810 on setfunc ice: Cache perout/extts requests and check flags ice: Align E810T GPIO to other products ice: Add SDPs support for E825C ice: Implement ice_ptp_pin_desc ==================== Link: https://patch.msgid.link/20241001201702.3252954-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * | ice: Drop auxbus use for PTP to finalize ice_adapter moveSergey Temerkhanov2024-10-012-273/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Drop unused auxbus/auxdev support from the PTP code due to move to the ice_adapter. Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * | ice: Use ice_adapter for PTP shared data instead of auxdevSergey Temerkhanov2024-10-015-43/+105
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use struct ice_adapter to hold shared PTP data and control PTP related actions instead of auxbus. This allows significant code simplification and faster access to the container fields used in the PTP support code. Move the PTP port list to the ice_adapter container to simplify the code and avoid race conditions which could occur due to the synchronous nature of the initialization/access and certain memory saving can be achieved by moving PTP data into the ice_adapter itself. Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * | ice: Initial support for E825C hardware in ice_adapterSergey Temerkhanov2024-10-011-3/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Address E825C devices by PCI ID since dual IP core configurations need 1 ice_adapter for both devices. Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * | ice: Add ice_get_ctrl_ptp() wrapper to simplify the codeSergey Temerkhanov2024-10-012-1/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add ice_get_ctrl_ptp() wrapper to simplify the PTP support code in the functions that do not use ctrl_pf directly. Add the control PF pointer to struct ice_adapter Rearrange fields in struct ice_adapter Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * | ice: Introduce ice_get_phy_model() wrapperSergey Temerkhanov2024-10-013-21/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce ice_get_phy_model() to improve code readability Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * | ice: Enable 1PPS out from CGU for E825C productsSergey Temerkhanov2024-10-013-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement configuring 1PPS signal output from CGU. Use maximal amplitude because Linux PTP pin API does not have any way for user to set signal level. This change is necessary for E825C products to properly output any signal from 1PPS pin. Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com> Co-developed-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * | ice: Read SDP section from NVM for pin definitionsYochai Hagvi2024-10-015-28/+186
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PTP pins assignment and their related SDPs (Software Definable Pins) are currently hardcoded. Fix that by reading NVM section instead on products supporting this, which are E810 products. If SDP section is not defined in NVM, the driver continues to use the hardcoded table. Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Yochai Hagvi <yochai.hagvi@intel.com> Co-developed-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * | ice: Disable shared pin on E810 on setfuncKarol Kolacinski2024-10-011-0/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When setting a new supported function for a pin on E810, disable other enabled pin that shares the same GPIO. Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * | ice: Cache perout/extts requests and check flagsKarol Kolacinski2024-10-014-204/+212
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cache original PTP GPIO requests instead of saving each parameter in internal structures for periodic output or external timestamp request. Factor out all periodic output register writes from ice_ptp_cfg_clkout to a separate function to improve readability. Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
| * | ice: Align E810T GPIO to other productsKarol Kolacinski2024-10-015-405/+155
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of having separate PTP GPIO implementation for E810T, use existing one from all other products. Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-04-27 20:27:03 +0000