summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/mellanox/mlx4/main.c
Commit message (Collapse)AuthorAgeFilesLines
* net/mlx4_core: Set initial admin GUIDs for VFsYishai Hadas2015-04-151-0/+15
| | | | | | | | | | To have out of the box experience, the PF generates random GUIDs who serve as the initial admin values. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* net/mlx4_core: Manage alias GUID per VFYishai Hadas2015-04-151-0/+16
| | | | | | | | | | | | | Manages alias GUIDs per VF per port in the core layer. This is a pre-step for managing alias GUIDs in a mode that the admin GUID is returned via ib_query_gid() regardless of whether the SM has approved it or not. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* net/mlx4_en: Add RX-ALL supportMuhammad Mahajna2015-04-021-0/+21
| | | | | | | | | | | | Enabled when the device supports KEEP FCS and IGNORE FCS. When the flag is set, pass all received frames up the stack, even ones with invalid FCS, controlled by ethtool. Signed-off-by: Muhammad Mahajna <muhammadm@mellanox.com> Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4: Warn users of depracated QoS FirmwareIdo Shamay2015-04-021-0/+8
| | | | | | | | | | | A new capability bit was introduced in the past to to differ devices using the QoS ETS feature. The old was deprecated since then. If driver sees device which set only the old capabilty, it will print warning to user suggesting to upgrade the FW. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4: Add RSS support for fragmented IP datagramsIdo Shamay2015-04-021-0/+2
| | | | | | | | | | | | | Enable RSS support for fragmented IP packets, when device supports it. Until now, fragmented IP packets were directed only to the default_qpn. Since IP fragments (datagram) have no upper protocols (L3 IP packets), hash is performed on 3-tuple - dst MAC, source IP and dest IP. The HW makes sure that this holds for the 1st fragment too, so all fragments go to the same QP. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_core: Add basic support for QP max-rate limitingOr Gerlitz2015-03-181-0/+2
| | | | | | | | | | | | | | | | | | | Add the low-level device commands and definitions used for QP max-rate limiting. This is done through the following elements: - read rate-limit device caps in QUERY_DEV_CAP: number of different rates and the min/max rates in Kbs/Mbs/Gbs units - enhance the QP context struct to contain rate limit units and value - allow to do run time rate-limit setting to QPs through the update-qp firmware command - QP rate-limiting is disallowed for VFs Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_core: Fix misleading debug print on CQE stride supportOr Gerlitz2015-02-041-1/+2
| | | | | | | | | | We do support cache line sizes of 32 and 64 bytes without activating the CQE stride feature. Fix a misleading print saying that these cache line sizes aren't supported. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_core: Port aggregation upper layer interfaceMoni Shoua2015-02-041-0/+89
| | | | | | | | | | | | | | | | | | | | | | | | | Supply interface functions to bond and unbond ports of a mlx4 internal interfaces. Example for such an interface is the one registered by the mlx4 IB driver under RoCE. There are 1. Functions to go in/out to/from bonded mode 2. Function to remap virtual ports to physical ports The bond_mutex prevents simultaneous access to data that keep status of the device in bonded mode. The upper mlx4 interface marks to the mlx4 core module that they want to be subject for such bonding by setting the MLX4_INTFF_BONDING flag. Interface which goes to/from bonded mode is re-created. The mlx4 Ethernet driver does not set this flag when registering the interface, the IB driver does. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_core: Fix mem leak in SRIOV mlx4_init_one error flowJack Morgenstein2015-01-271-1/+3
| | | | | | | | | Structs allocated for the resource tracker must be freed in the error flow. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_core: Add reserved lkey for VFs to QUERY_FUNC_CAPJack Morgenstein2015-01-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | The reserved lKey is different for each VF. A base lkey value is returned in QUERY_DEV_CAP at offset 0x98. The reserved L_key value for a VF is: VF_lkey = base_lkey + (VF_number << 8). This VF L_key value should be returned in QUERY_FUNC_CAP (opcode-modifier = 0) at offset 0x48. To indicate that the lkey value at offset 0x48 is valid, the Hypervisor sets a flag bit in dword 0x0, offset 27 in the QUERY_FUNC_CAP wrapper function. When the VF calls QUERY_FUNC_CAP, it should check if this flag bit is set. If it is set, the VF should take the reserved lkey value at offset 0x48. If the bit is not set, the VF should not use a reserved lkey (i.e., should set its reserved lkey value to 0). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-01-271-2/+1
|\ | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/boot/dts/imx6sx-sdb.dts net/sched/cls_bpf.c Two simple sets of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net/mlx4: Don't disable vxlan offloads under DMFS-A0 optimized steeringOr Gerlitz2015-01-151-2/+1
| | | | | | | | | | | | | | | | | | | | Except for VXLAN steering rules, all offloads should work as they were under plain DMFS mode. Fix that by enabling all the offloads under DMFS-A0 mode, except for VXLAN steering rules. Fixes: d57febe1a478 "net/mlx4: Add A0 hybrid steering" Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4_core: Reset flow activation upon SRIOV fatal command casesYishai Hadas2015-01-251-7/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When SRIOV commands are executed over the comm-channel and get a fatal error (e.g. timeout, closing command failure) the VF enters into error state and reset flow is activated. To be able to recognize whether the failure was on a closing command, the operational code for the given VHCR command is used. Once the device entered into an error state we prevent redundant error messages from being printed. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4_core: Enable device recovery flow with SRIOVYishai Hadas2015-01-251-27/+108
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In SRIOV, both the PF and the VF may attempt device recovery whenever they assume that the device is not functioning. When the PF driver resets the device, the VF should detect this and attempt to reinitialize itself. The VF must be able to reset itself under all circumstances, even if the PF is not responsive. The VF shall reset itself in the following cases: 1. Commands are not processed within reasonable time over the communication channel. This is done considering device state and the correct return code based on the command as was done in the native mode, done in the next patch. 2. The VF driver receives an internal error event reported by the PF on the communication channel. This occurs when the PF driver resets the device or when VF is out of sync with the PF. Add 'VF reset' capability, which allows the VF to reinitialize itself even when the PF is not responsive. As PF and VF may run their reset flow simulantanisly, there are several cases that are handled: - Prevent freeing VF resources upon FLR, when PF is in its unloading stage. - Prevent PF getting VF commands before it has finished initializing its resources. - Upon VF startup, check that comm-channel is online before sending commands to the PF and getting timed-out. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4_core: Handle AER flow properlyYishai Hadas2015-01-251-6/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | Fix AER callbacks to work properly, it includes: - Refractoring AER to be aligned with Reset flow support. - Sync with concurrent catas flow. In addition, fix the shutdown PCI callback to sync with concurrent catas flow. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4_core: Manage interface state for Reset flow casesYishai Hadas2015-01-251-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to manage interface state to sync between reset flow and some other relative cases such as remove_one. This has to be done to prevent certain races. For example in case software stack is down as a result of unload call, the remove_one should skip the unload phase. Implement the remove_one case, handling AER and other cases comes next. The interface can be up/down, upon remove_one, the state will include an extra bit indicating that the device is cleaned-up, forcing other tasks to finish before the final cleanup. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4_core: Enhance the catas flow to support device resetYishai Hadas2015-01-251-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This includes: - resetting the chip when a fatal error is detected (the current code does not do this). - exposing the ability to enter error state from outside the catas code by calling its functionality. (E.g. FW Command timeout, AER error). - managing a persistent device state. This is needed to sync between reset flow cases. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4_core: Refactor the catas flow to work per deviceYishai Hadas2015-01-251-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | Using a WQ per device instead of a single global WQ, this allows independent reset handling per device even when SRIOV is used. This comes as a pre-patch for supporting chip reset for both native and SRIOV. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4_core: Set device configuration data to be persistent across resetYishai Hadas2015-01-251-2/+43
| | | | | | | | | | | | | | | | | | | | | | | | When an HCA enters an internal error state, this is detected by the driver. The driver then should reset the HCA and restart the software stack. Keep ports information and some SRIOV configuration in a persistent area to have it valid across reset. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4_core: Maintain a persistent memory for mlx4 deviceYishai Hadas2015-01-251-40/+66
|/ | | | | | | | | Maintain a persistent memory that should survive reset flow/PCI error. This comes as a preparation for coming series to support above flows. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_core: Fix error flow in mlx4_init_hca()Jack Morgenstein2015-01-021-9/+4
| | | | | | | | | | | | We shouldn't call UNMAP_FA here, this is done in mlx4_load_one. If mlx4_query_func fails, we need to invoke CLOSE_HCA for both native and master. Fixes: a0eacca948d2 ('net/mlx4_core: Refactor mlx4_load_one') Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'rdma-for-linus' of ↵Linus Torvalds2014-12-181-3/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband updates from Roland Dreier: "Main batch of InfiniBand/RDMA changes for 3.19: - On-demand paging support in core midlayer and mlx5 driver. This lets userspace create non-pinned memory regions and have the adapter HW trigger page faults. - iSER and IPoIB updates and fixes. - Low-level HW driver updates for cxgb4, mlx4 and ocrdma. - Other miscellaneous fixes" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (56 commits) IB/mlx5: Implement on demand paging by adding support for MMU notifiers IB/mlx5: Add support for RDMA read/write responder page faults IB/mlx5: Handle page faults IB/mlx5: Page faults handling infrastructure IB/mlx5: Add mlx5_ib_update_mtt to update page tables after creation IB/mlx5: Changes in memory region creation to support on-demand paging IB/mlx5: Implement the ODP capability query verb mlx5_core: Add support for page faults events and low level handling mlx5_core: Re-add MLX5_DEV_CAP_FLAG_ON_DMND_PG flag IB/srp: Allow newline separator for connection string IB/core: Implement support for MMU notifiers regarding on demand paging regions IB/core: Add support for on demand paging regions IB/core: Add flags for on demand paging support IB/core: Add support for extended query device caps IB/mlx5: Add function to read WQE from user-space IB/core: Add umem function to read data from user-space IB/core: Replace ib_umem's offset field with a full address IB/mlx5: Enhance UMR support to allow partial page table update IB/mlx5: Remove per-MR pas and dma pointers RDMA/ocrdma: Always resolve destination mac from GRH for UD QPs ...
| * mlx4_core: Check for DPDP violation only when DPDP is not supportedYuval Shaia2014-12-151-3/+3
| | | | | | | | | | | | | | Move check for DPDP out of the loop to make the code more readable. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
* | net/mlx4_core: Avoid double dumping of the PF device capabilitiesOr Gerlitz2014-12-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | To support asymmetric EQ allocations, we should query the device capabilities prior to enabling SRIOV. As a side effect of adding that, we are dumping the PF device capabilities twice. Avoid that by moving the printing into a helper function which is called once. Fixes: 7ae0e400cd93 ('net/mlx4_core: Flexible (asymmetric) allocation of EQs and MSI-X vectors for PF/VFs') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4_core: Fixed memory leak and incorrect refcount in mlx4_load_oneMatan Barak2014-12-151-28/+33
|/ | | | | | | | | | | | | | The current mlx4_load_one has a memory leak as it always allocates dev_cap, but frees it only on error. In addition, even if VFs exist when mlx4_load_one is called, we still need to notify probed VFs that we're loading (by incrementing pf_loading). Fixes: a0eacca948d2 ('net/mlx4_core: Refactor mlx4_load_one') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4: Add support for A0 steeringMatan Barak2014-12-111-9/+123
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the required firmware commands for A0 steering and a way to enable that. The firmware support focuses on INIT_HCA, QUERY_HCA, QUERY_PORT, QUERY_DEV_CAP and QUERY_FUNC_CAP commands. Those commands are used to configure and query the device. The different A0 DMFS (steering) modes are: Static - optimized performance, but flow steering rules are limited. This mode should be choosed explicitly by the user in order to be used. Dynamic - this mode should be explicitly choosed by the user. In this mode, the FW works in optimized steering mode as long as it can and afterwards automatically drops to classic (full) DMFS. Disable - this mode should be explicitly choosed by the user. The user instructs the system not to use optimized steering, even if the FW supports Dynamic A0 DMFS (and thus will be able to use optimized steering in Default A0 DMFS mode). Default - this mode is implicitly choosed. In this mode, if the FW supports Dynamic A0 DMFS, it'll work in this mode. Otherwise, it'll work at Disable A0 DMFS mode. Under SRIOV configuration, when the A0 steering mode is enabled, older guest VF drivers who aren't using the RX QP allocation flag (MLX4_RESERVE_A0_QP) will get a QP from the general range and fail when attempting to register a steering rule. To avoid that, the PF context behaviour is changed once on A0 static mode, to require support for the allocation flag in VF drivers too. In order to enable A0 steering, we use log_num_mgm_entry_size param. If the value of the parameter is not positive, we treat the absolute value of log_num_mgm_entry_size as a bit field. Setting bit 2 of this bit field enables static A0 steering. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4: Refactor QUERY_PORTMatan Barak2014-12-111-22/+49
| | | | | | | | | | | Currently QUERY_PORT is done as a part of QUERY_DEV_CAP firmware command. Since we would like to use it without querying all device capabilities, extract this part to be a function of its own. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4: Add A0 hybrid steeringMatan Barak2014-12-111-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A0 hybrid steering is a form of high performance flow steering. By using this mode, mlx4 cards use a fast limited table based steering, in order to enable fast steering of unicast packets to a QP. In order to implement A0 hybrid steering we allocate resources from different zones: (1) General range (2) Special MAC-assigned QPs [RSS, Raw-Ethernet] each has its own region. When we create a rss QP or a raw ethernet (A0 steerable and BF ready) QP, we try hard to allocate the QP from range (2). Otherwise, we try hard not to allocate from this range. However, when the system is pushed to its limits and one needs every resource, the allocator uses every region it can. Meaning, when we run out of raw-eth qps, the allocator allocates from the general range (and the special-A0 area is no longer active). If we run out of RSS qps, the mechanism tries to allocate from the raw-eth QP zone. If that is also exhausted, the allocator will allocate from the general range (and the A0 region is no longer active). Note that if a raw-eth qp is allocated from the general range, it attempts to allocate the range such that bits 6 and 7 (blueflame bits) in the QP number are not set. When the feature is used in SRIOV, the VF has to notify the PF what kind of QP attributes it needs. In order to do that, along with the "Eth QP blueflame" bit, we reserve a new "A0 steerable QP". According to the combination of these bits, the PF tries to allocate a suitable QP. In order to maintain backward compatibility (with older PFs), the PF notifies which QP attributes it supports via QUERY_FUNC_CAP command. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4: Change QP allocation schemeEugenia Emantayev2014-12-111-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When using BF (Blue-Flame), the QPN overrides the VLAN, CV, and SV fields in the WQE. Thus, BF may only be used for QPNs with bits 6,7 unset. The current Ethernet driver code reserves a Tx QP range with 256b alignment. This is wrong because if there are more than 64 Tx QPs in use, QPNs >= base + 65 will have bits 6/7 set. This problem is not specific for the Ethernet driver, any entity that tries to reserve more than 64 BF-enabled QPs should fail. Also, using ranges is not necessary here and is wasteful. The new mechanism introduced here will support reservation for "Eth QPs eligible for BF" for all drivers: bare-metal, multi-PF, and VFs (when hypervisors support WC in VMs). The flow we use is: 1. In mlx4_en, allocate Tx QPs one by one instead of a range allocation, and request "BF enabled QPs" if BF is supported for the function 2. In the ALLOC_RES FW command, change param1 to: a. param1[23:0] - number of QPs b. param1[31-24] - flags controlling QPs reservation Bit 31 refers to Eth blueflame supported QPs. Those QPs must have bits 6 and 7 unset in order to be used in Ethernet. Bits 24-30 of the flags are currently reserved. When a function tries to allocate a QP, it states the required attributes for this QP. Those attributes are considered "best-effort". If an attribute, such as Ethernet BF enabled QP, is a must-have attribute, the function has to check that attribute is supported before trying to do the allocation. In a lower layer of the code, mlx4_qp_reserve_range masks out the bits which are unsupported. If SRIOV is used, the PF validates those attributes and masks out unsupported attributes as well. In order to notify VFs which attributes are supported, the VF uses QUERY_FUNC_CAP command. This command's mailbox is filled by the PF, which notifies which QP allocation attributes it supports. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_core: Support more than 64 VFsMatan Barak2014-11-131-0/+24
| | | | | | | | | | We now allow up to 126 VFs. Note though that certain firmware versions only allow up to 80 VFs. Moreover, old HCAs only support 64 VFs. In these cases, we limit the maximum number of VFs to 64. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_core: Flexible (asymmetric) allocation of EQs and MSI-X vectors for ↵Matan Barak2014-11-131-19/+125
| | | | | | | | | | | | | | | | | | | | | | | PF/VFs Previously, the driver queried the firmware in order to get the number of supported EQs. Under SRIOV, since this was done before the driver notified the firmware how many VFs it actually needs, the firmware had to take into account a worst case scenario and always allocated four EQs per VF, where one was used for events while the others were used for completions. Now, when the firmware supports the asymmetric allocation scheme, denoted by exposing num_sys_eqs > 0 (--> MLX4_DEV_CAP_FLAG2_SYS_EQS), we use the QUERY_FUNC command to query the firmware before enabling SRIOV. Thus we can get more EQs and MSI-X vectors per function. Moreover, when running in the new firmware/driver mode, the limitation that the number of EQs should be a power of two is lifted. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_core: Refactor mlx4_load_oneMatan Barak2014-11-131-42/+99
| | | | | | | | | | | | Refactor mlx4_load_one, as a preparation step for a new and more complicated load function. The goal is to support both newer firmware that required init_hca to be done before enable_sriov and legacy firmwares that requires things to be done the other way around. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_core: Refactor mlx4_cmd_init and mlx4_cmd_cleanupMatan Barak2014-11-131-3/+3
| | | | | | | | | | | | | Refactoring mlx4_cmd_init and mlx4_cmd_cleanup such that partial init and cleanup are possible. After this refactoring, calling mlx4_cmd_init several times is safe. This is necessary in the VF init flow when mlx4_init_hca returns -EACCESS, we need to issue cleanup and re-attempt to call it with the slave flag. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_core: Use correct variable type for mlx4_slave_capMatan Barak2014-11-131-2/+2
| | | | | | | | | | | | We've used an incorrect type for the loop counter and the mlx4_QUERY_FUNC_CAP function. The current input modifier is either a port or a boolean. Since the number of ports is always a positive value < 255, we should use u8 instead of an integer with casting. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_en: Extend checksum offloading by CHECKSUM COMPLETEShani Michaeli2014-11-111-0/+9
| | | | | | | | | | | | | | | | | | | When processing received traffic, pass CHECKSUM_COMPLETE status to the stack, with calculated checksum for non TCP/UDP packets (such as GRE or ICMP). Although the stack expects checksum which doesn't include the pseudo header, the HW adds it. To address that, we are subtracting the pseudo header checksum from the checksum value provided by the HW. In the IPv6 case, we also compute/add the IP header checksum which is not added by the HW for such packets. Cc: Jerry Chu <hkchu@google.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_core: Protect port type setting by mutexAmir Vadai2014-11-031-1/+8
| | | | | | | | | | | We need to protect set_port_type() for concurrency, as the sysfs code could call it from mutliple contexts in parallel. The port_mutex is not enough because we need to protect from concurrent modification of 'info' and stopping of the port sensing work. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-10-021-2/+2
|\ | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/usb/r8152.c net/netfilter/nfnetlink.c Both r8152 and nfnetlink conflicts were simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net/mlx4_core: Allow not to specify probe_vf in SRIOV IB modeMatan Barak2014-09-261-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the HCA is configured in SRIOV IB mode (that is, at least one of the ports is IB) and the probe_vf module param isn't specified, mlx4_init_one() failed because of the following condition: if (ib_ports && (num_vfs_argc > 1 || probe_vfs_argc > 1)) { ..... } The root cause for that is a mistake in the initialization of num_vfs_argc and probe_vfs_argc. When num_vfs / probe_vf aren't given, their argument count counterpart should be 0, fix that. Fixes: dd41cc3bb90e ('net/mlx4: Adapt num_vfs/probed_vf params for single port VF') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4_core: New init and exit flow for mlx4_coreMajd Dibbiny2014-09-301-174/+219
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the new flow, we separate the pci initialization and teardown from the initialization and teardown of the other resources. __mlx4_init_one handles the pci resources initialization. It then calls mlx4_load_one to initialize the remainder of the resources. When removing a device, mlx4_remove_one is invoked. However, now mlx4_remove_one calls mlx4_unload_one to free all the resources except the pci resources. When mlx4_unload_one returns, mlx4_remove_one then frees the pci resources. The above separation will allow us to implement 'reset flow' in the future. It will also enable more EQs for VFs and is a pre-step to the modern API to enable/disable SRIOV. Also added nvfs; an integer array of size MLX4_MAX_PORTS + 1; to the mlx4_dev struct. This new field is used to avoid parsing the num_vfs module parameter each time the mlx4_restart_one is called. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4_core: Don't disable SRIOV if there are active VFsJack Morgenstein2014-09-301-7/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When unloading the host driver while there are VFs active on VMs, the PF driver disabled sriov anyway, causing kernel crashes. We now leave SRIOV enabled, to avoid that. When the driver is reloaded, __mlx4_init_one is invoked on the PF. It now checks to see if SRIOV is already enabled on the PF -- and if so does not enable sriov again. Signed-off-by: Tal Alon <talal@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx4_core: Enable CQE/EQE stride supportIdo Shamay2014-09-191-2/+59
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This feature is intended for archs having cache line larger then 64B. Since our CQE/EQEs are generally 64B in those systems, HW will write twice to the same cache line consecutively, causing pipe locks due to he hazard prevention mechanism. For elements in a cyclic buffer, writes are consecutive, so entries smaller than a cache line should be avoided, especially if they are written at a high rate. Reduce consecutive writes to same cache line in CQs/EQs, by allowing the driver to increase the distance between entries so that each will reside in a different cache line. Until the introduction of this feature, there were two types of CQE/EQE: 1. 32B stride and context in the [0-31] segment 2. 64B stride and context in the [32-63] segment This feature introduces two additional types: 3. 128B stride and context in the [0-31] segment (128B cache line) 4. 256B stride and context in the [0-31] segment (256B cache line) Modify the mlx4_core driver to query the device for the CQE/EQE cache line stride capability and to enable that capability when the host cache line size is larger than 64 bytes (supported cache lines are 128B and 256B). The mlx4 IB driver and libmlx4 need not be aware of this change. The PF context behaviour is changed to require this change in VF drivers running on such archs. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'pci-v3.17-changes-2' of ↵Linus Torvalds2014-08-141-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull DEFINE_PCI_DEVICE_TABLE removal from Bjorn Helgaas: "Part two of the PCI changes for v3.17: - Remove DEFINE_PCI_DEVICE_TABLE macro use (Benoit Taine) It's a mechanical change that removes uses of the DEFINE_PCI_DEVICE_TABLE macro. I waited until later in the merge window to reduce conflicts, but it's possible you'll still see a few" * tag 'pci-v3.17-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Remove DEFINE_PCI_DEVICE_TABLE macro use
| * PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine2014-08-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | Merge tag 'rdma-for-linus' of ↵Linus Torvalds2014-08-141-0/+5
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband/rdma updates from Roland Dreier: "Main set of InfiniBand/RDMA updates for 3.17 merge window: - MR reregistration support - MAD support for RMPP in userspace - iSER and SRP initiator updates - ocrdma hardware driver updates - other fixes..." * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (52 commits) IB/srp: Fix return value check in srp_init_module() RDMA/ocrdma: report asic-id in query device RDMA/ocrdma: Update sli data structure for endianness RDMA/ocrdma: Obtain SL from device structure RDMA/uapi: Include socket.h in rdma_user_cm.h IB/srpt: Handle GID change events IB/mlx5: Use ARRAY_SIZE instead of sizeof/sizeof[0] IB/mlx4: Use ARRAY_SIZE instead of sizeof/sizeof[0] RDMA/amso1100: Check for integer overflow in c2_alloc_cq_buf() IPoIB: Remove unnecessary test for NULL before debugfs_remove() IB/mad: Add user space RMPP support IB/mad: add new ioctl to ABI to support new registration options IB/mad: Add dev_notice messages for various umad/mad registration failures IB/mad: Update module to [pr|dev]_* style print messages IB/ipoib: Avoid multicast join attempts with invalid P_key IB/umad: Update module to [pr|dev]_* style print messages IB/ipoib: Avoid flushing the workqueue from worker context IB/ipoib: Use P_Key change event instead of P_Key polling mechanism IB/ipath: Add P_Key change event support mlx4_core: Add support for secure-host and SMP firewall ...
| * mlx4_core: Add support for secure-host and SMP firewallJack Morgenstein2014-08-051-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Secure-host is the general term for the capability of a device to protect itself and the subnet from malicious host software. This is achieved by: 1. Not allowing un-trusted entities to access device configuration registers, directly (through pci_cr or pci_conf) and indirectly (through MADs). 2. Hiding M_Key from untrusted entities. 3. Preventing the modification of GUID0 by un-trusted entities 4. Not allowing drivers on untrusted hosts to receive nor to transmit packets over QP0 (SMP Firewall). The secure-host capability depends on firmware handling all QP0 packets, and not passing these packets up to the driver. Any information required by the driver for proper operation (e.g., SM lid) is passed via events generated by the firmware while processing QP0 MADs. Driver support mainly requires using the MAD_DEMUX FW command at startup, where the feature is enabled/disabled through a procedure described in the Mellanox HCA tools package. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [ Fix error path in mlx4_setup_hca to go to err_mcg_table_free. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
* | net/mlx4_core: Use low memory profile on kdump kernelAmir Vadai2014-07-221-3/+25
|/ | | | | | | | | | When running in kdump kernel, reduce number of resources allocated for the hardware. This will enable the NIC to operate in this low memory environment at the expense of performance and some features not related to the basic NIC functionality. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/mlx4_core: Fix the error flow when probing with invalid VF configurationOr Gerlitz2014-06-221-1/+2
| | | | | | | | | | | Single ported VF are currently not supported on configurations where one or both ports are IB. When we hit this case, the relevant flow in the driver didn't return error and jumped to the wrong label. Fix that. Fixes: dd41cc3 ('net/mlx4: Adapt num_vfs/probed_vf params for single port VF') Reported-by: Shirley Ma <shirley.ma@oracle.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2014-06-121-159/+119
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov. 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J Benniston. 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn Mork. 4) BPF now has a "random" opcode, from Chema Gonzalez. 5) Add more BPF documentation and improve test framework, from Daniel Borkmann. 6) Support TCP fastopen over ipv6, from Daniel Lee. 7) Add software TSO helper functions and use them to support software TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia. 8) Support software TSO in fec driver too, from Nimrod Andy. 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli. 10) Handle broadcasts more gracefully over macvlan when there are large numbers of interfaces configured, from Herbert Xu. 11) Allow more control over fwmark used for non-socket based responses, from Lorenzo Colitti. 12) Do TCP congestion window limiting based upon measurements, from Neal Cardwell. 13) Support busy polling in SCTP, from Neal Horman. 14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru. 15) Bridge promisc mode handling improvements from Vlad Yasevich. 16) Don't use inetpeer entries to implement ID generation any more, it performs poorly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits) rtnetlink: fix userspace API breakage for iproute2 < v3.9.0 tcp: fixing TLP's FIN recovery net: fec: Add software TSO support net: fec: Add Scatter/gather support net: fec: Increase buffer descriptor entry number net: fec: Factorize feature setting net: fec: Enable IP header hardware checksum net: fec: Factorize the .xmit transmit function bridge: fix compile error when compiling without IPv6 support bridge: fix smatch warning / potential null pointer dereference via-rhine: fix full-duplex with autoneg disable bnx2x: Enlarge the dorq threshold for VFs bnx2x: Check for UNDI in uncommon branch bnx2x: Fix 1G-baseT link bnx2x: Fix link for KR with swapped polarity lane sctp: Fix sk_ack_backlog wrap-around problem net/core: Add VF link state control policy net/fsl: xgmac_mdio is dependent on OF_MDIO net/fsl: Make xgmac_mdio read error message useful net_sched: drr: warn when qdisc is not work conserving ...
| * net/mlx4_core: Keep only one driver entry release mlx4_privWei Yang2014-06-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Following commit befdf89 "net/mlx4_core: Preserve pci_dev_data after __mlx4_remove_one()", there are two mlx4 pci callbacks which will attempt to release the mlx4_priv object -- .shutdown and .remove. This leads to a use-after-free access to the already freed mlx4_priv instance and trigger a "Kernel access of bad area" crash when both .shutdown and .remove are called. During reboot or kexec, .shutdown is called, with the VFs probed to the host going through shutdown first and then the PF. Later, the PF will trigger VFs' .remove since VFs still have driver attached. Fix that by keeping only one driver entry which releases mlx4_priv. Fixes: befdf89 ('net/mlx4_core: Preserve pci_dev_data after __mlx4_remove_one()') CC: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2014-06-031-0/+1
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: include/net/inetpeer.h net/ipv6/output_core.c Changes in net were fixing bugs in code removed in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-01 20:56:22 +0000