summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet
Commit message (Collapse)AuthorAgeFilesLines
...
| * | bnxt_en: close & open NIC, only when the interface is in running state.Venkat Duvvuru2018-03-121-5/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | bnxt_restore_pf_fw_resources routine frees PF resources by calling close_nic and allocates the resources back, by doing open_nic. However, this is not needed, if the PF is already in closed state. This bug causes the driver to call open the device and call request_irq() when it is not needed. Ultimately, pci_disable_msix() will crash when bnxt_en is unloaded. This patch fixes the problem by skipping __bnxt_close_nic and __bnxt_open_nic inside bnxt_restore_pf_fw_resources routine, if the interface is not running. Fixes: 80fcaf46c092 ("bnxt_en: Restore MSIX after disabling SRIOV.") Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bnxt_en: Return standard Linux error codes for hwrm flow cmds.Venkat Duvvuru2018-03-121-3/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, internal error value is returned by the driver, when hwrm_cfa_flow_alloc() fails due lack of resources. We should be returning Linux errno value -ENOSPC instead. This patch also converts other similar command errors to standard Linux errno code (-EIO) in bnxt_tc.c Fixes: db1d36a27324 ("bnxt_en: add TC flower offload flow_alloc/free FW cmds") Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bnxt_en: Fix regressions when setting up MQPRIO TX rings.Michael Chan2018-03-121-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recent changes added the bnxt_init_int_mode() call in the driver's open path whenever ring reservations are changed. This call was previously only called in the probe path. In the open path, if MQPRIO TC has been setup, the bnxt_init_int_mode() call would reset and mess up the MQPRIO per TC rings. Fix it by not re-initilizing bp->tx_nr_rings_per_tc in bnxt_init_int_mode(). Instead, initialize it in the probe path only after the bnxt_init_int_mode() call. Fixes: 674f50a5b026 ("bnxt_en: Implement new method to reserve rings.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bnxt_en: Pass complete VLAN TCI to the stack.Michael Chan2018-03-122-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | When receiving a packet with VLAN tag, pass the entire 16-bit TCI to the stack when calling __vlan_hwaccel_put_tag(). The current code is only passing the 12-bit tag and it is missing the priority bits. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bnxt_en: Remove unwanted ovs-offload messages in some conditionsSriharsha Basavapatna2018-03-121-8/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In some conditions when the driver fails to add a flow in HW and returns an error back to the stack, the stack continues to invoke get_flow_stats() and/or del_flow() on it. The driver fails these APIs with an error message "no flow_node for cookie". The message gets logged repeatedly as long as the stack keeps invoking these functions. Fix this by removing the corresponding netdev_info() calls from these functions. Fixes: d7bc73053024 ("bnxt_en: add code to query TC flower offload stats") Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bnxt_en: Fix vnic accounting in the bnxt_check_rings() path.Eddie Wai2018-03-121-44/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The number of vnics to check must be determined ahead of time because only standard RX rings require vnics to support RFS. The logic is similar to the ring reservation logic and we can now use the refactored common functions to do most of the work in setting up the firmware message. Fixes: 8f23d638b36b ("bnxt_en: Expand bnxt_check_rings() to check all resources.") Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bnxt_en: Refactor the functions to reserve hardware rings.Michael Chan2018-03-121-32/+53
| |/ | | | | | | | | | | | | | | | | The bnxt_hwrm_reserve_{pf|vf}_rings() functions are very similar to the bnxt_hwrm_check_{pf|vf}_rings() functions. Refactor the former so that the latter can make use of common code in the next patch. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * mlxsw: spectrum: Prevent duplicate mirrorsPetr Machata2018-03-092-4/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Spectrum ASIC doesn't support mirroring more than once from a single binding point (which is a port-direction pair). Therefore detect that a second binding of a given binding point is attempted. To that end, extend struct mlxsw_sp_span_inspected_port to track whether a given binding point is bound or not. Extend mlxsw_sp_span_entry_port_find() to look for ports based on the full unique key: port number, direction, and boundness. Besides fixing the overt bug where configured mirrors are not offloaded, this also fixes a more subtle bug: mlxsw_sp_span_inspected_port_del() just defers to mlxsw_sp_span_entry_bound_port_find(), and that used to find the first port with the right number (disregarding the type). Thus by adding and removing egress and ingress mirrors in the right order, one could trick the system into believing it has no egress mirrors when in fact it did have some. That then caused that mlxsw_sp_span_port_mtu_update() didn't update mirroring buffer when MTU was changed. Fixes: 763b4b70afcd ("mlxsw: spectrum: Add support in matchall mirror TC offloading") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * mlxsw: spectrum: Fix gact_ok offloadingJiri Pirko2018-03-095-1/+19
| | | | | | | | | | | | | | | | | | | | | | For ok GACT action, TERMINATE binding_cmd should be used in action set passed down to HW. Fixes: b2925957ec1a9 ("mlxsw: spectrum_flower: Offload "ok" termination action") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reported-by: Alexander Petrovskiy <alexpe@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: ethernet: ave: enable Rx drop interruptKunihiko Hayashi2018-03-091-1/+1
| | | | | | | | | | | | | | | | | | This enables AVE_GI_RXDROP interrupt factor. This factor indicates depletion of Rx descriptors and the handler counts the number of dropped packets. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * cxgb4: do not set needs_free_netdev for mgmt dev'sGanesh Goudar2018-03-071-1/+0
| | | | | | | | | | | | | | | | Do not set 'needs_free_netdev' as we do call free_netdev for mgmt net devices, doing both hits BUG_ON. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * cxgb4: copy adap index to PF0-3 adapter instancesGanesh Goudar2018-03-071-0/+2
| | | | | | | | | | | | | | | | | | instantiation of VF's on different adapters fails, copy adapter index and chip type to PF0-3 adapter instances to fix the issue. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: smsc911x: Fix unload crash when link is upJeremy Linton2018-03-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The smsc911x driver will crash if it is rmmod'ed while the netdev is up like: Call trace: phy_detach+0x94/0x150 phy_disconnect+0x40/0x50 smsc911x_stop+0x104/0x128 [smsc911x] __dev_close_many+0xb4/0x138 dev_close_many+0xbc/0x190 rollback_registered_many+0x140/0x460 rollback_registered+0x68/0xb0 unregister_netdevice_queue+0x100/0x118 unregister_netdev+0x28/0x38 smsc911x_drv_remove+0x58/0x130 [smsc911x] platform_drv_remove+0x30/0x50 device_release_driver_internal+0x15c/0x1f8 driver_detach+0x54/0x98 bus_remove_driver+0x64/0xe8 driver_unregister+0x34/0x60 platform_driver_unregister+0x20/0x30 smsc911x_cleanup_module+0x14/0xbca8 [smsc911x] SyS_delete_module+0x1e8/0x238 __sys_trace_return+0x0/0x4 This is caused by the mdiobus being unregistered/free'd and the code in phy_detach() attempting to manipulate mdio related structures from unregister_netdev() calling close() To fix this, we delay the mdiobus teardown until after the netdev is deregistered. Reported-by: Matt Sealey <matt.sealey@arm.com> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: qcom/emac: Use proper free methods during TXHemanth Puranik2018-03-071-9/+14
| | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the warning messages/call traces seen if DMA debug is enabled, In case of fragmented skb's memory was allocated using dma_map_page but freed using dma_unmap_single. This patch modifies buffer allocations in TX path to use dma_map_page in all the places and dma_unmap_page while freeing the buffers. Signed-off-by: Hemanth Puranik <hpuranik@codeaurora.org> Acked-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * qed: Free RoCE ILT Memory on rmmod qedrMichal Kalderon2018-03-072-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rdma requires ILT Memory to be allocated for it's QPs. Each ILT entry points to a page used by several Rdma QPs. To avoid allocating all the memory in advance, the rdma implementation dynamically allocates memory as more QPs are added, however it does not dynamically free the memory. The memory should have been freed on rmmod qedr, but isn't. This patch adds the memory freeing on rmmod qedr (currently it will be freed with qed is removed). An outcome of this bug, is that if qedr is unloaded and loaded without unloaded qed, there will be no more RoCE traffic. The reason these are related, is that the logic of detecting the first QP ever opened is by asking whether ILT memory for RoCE has been allocated. In addition, this patch modifies freeing of the Task context to always use the PROTOCOLID_ROCE and not the protocol passed, this is because task context for iWARP and ROCE both use the ROCE protocol id, as opposed to the connection context. Fixes: dbb799c39717 ("qed: Initialize hardware for new protocols") Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge branch '1GbE' of ↵David S. Miller2018-03-074-26/+34
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2018-03-05 This series contains fixes to e1000e only. Benjamin Poirier provides all but one fix in this series, starting with workaround for a VMWare e1000e emulation issue where ICR reads 0x0 on the emulated device. Partially reverted a previous commit dealing with the "Other" interrupt throttling to avoid unforeseen fallout from these changes that are not strictly necessary. Restored the ICS write for receive and transmit queue interrupts in the case that txq or rxq bits were set in ICR and the Other interrupt handler read and cleared ICR before the queue interrupt was raised. Fixed an bug where interrupts may be missed if ICR is read while INT_ASSERTED is not set, so avoid the problem by setting all bits related to events that can trigger the Other interrupt in IMS. Fixed the return value for check_for_link() when auto-negotiation is off. Pierre-Yves Kerbrat fixes e1000e to use dma_zalloc_coherent() to make sure the ring is memset to 0 to prevent the area from containing garbage. v2: added an additional e1000e fix to the series ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * e1000e: allocate ring descriptors with dma_zalloc_coherentPierre-Yves Kerbrat2018-03-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Descriptor rings were not initialized at zero when allocated When area contained garbage data, it caused skb_over_panic in e1000_clean_rx_irq (if data had E1000_RXD_STAT_DD bit set) This patch makes use of dma_zalloc_coherent to make sure the ring is memset at 0 to prevent the area from containing garbage. Following is the signature of the panic: IODDR0@0.0: skbuff: skb_over_panic: text:80407b20 len:64010 put:64010 head:ab46d800 data:ab46d842 tail:0xab47d24c end:0xab46df40 dev:eth0 IODDR0@0.0: BUG: failure at net/core/skbuff.c:105/skb_panic()! IODDR0@0.0: Kernel panic - not syncing: BUG! IODDR0@0.0: IODDR0@0.0: Process swapper/0 (pid: 0, threadinfo=81728000, task=8173cc00 ,cpu: 0) IODDR0@0.0: SP = <815a1c0c> IODDR0@0.0: Stack: 00000001 IODDR0@0.0: b2d89800 815e33ac IODDR0@0.0: ea73c040 00000001 IODDR0@0.0: 60040003 0000fa0a IODDR0@0.0: 00000002 IODDR0@0.0: IODDR0@0.0: 804540c0 815a1c70 IODDR0@0.0: b2744000 602ac070 IODDR0@0.0: 815a1c44 b2d89800 IODDR0@0.0: 8173cc00 815a1c08 IODDR0@0.0: IODDR0@0.0: 00000006 IODDR0@0.0: 815a1b50 00000000 IODDR0@0.0: 80079434 00000001 IODDR0@0.0: ab46df40 b2744000 IODDR0@0.0: b2d89800 IODDR0@0.0: IODDR0@0.0: 0000fa0a 8045745c IODDR0@0.0: 815a1c88 0000fa0a IODDR0@0.0: 80407b20 b2789f80 IODDR0@0.0: 00000005 80407b20 IODDR0@0.0: IODDR0@0.0: IODDR0@0.0: Call Trace: IODDR0@0.0: [<804540bc>] skb_panic+0xa4/0xa8 IODDR0@0.0: [<80079430>] console_unlock+0x2f8/0x6d0 IODDR0@0.0: [<80457458>] skb_put+0xa0/0xc0 IODDR0@0.0: [<80407b1c>] e1000_clean_rx_irq+0x2dc/0x3e8 IODDR0@0.0: [<80407b1c>] e1000_clean_rx_irq+0x2dc/0x3e8 IODDR0@0.0: [<804079c8>] e1000_clean_rx_irq+0x188/0x3e8 IODDR0@0.0: [<80407b1c>] e1000_clean_rx_irq+0x2dc/0x3e8 IODDR0@0.0: [<80468b48>] __dev_kfree_skb_any+0x88/0xa8 IODDR0@0.0: [<804101ac>] e1000e_poll+0x94/0x288 IODDR0@0.0: [<8046e9d4>] net_rx_action+0x19c/0x4e8 IODDR0@0.0: ... IODDR0@0.0: Maximum depth to print reached. Use kstack=<maximum_depth_to_print> To specify a custom value (where 0 means to display the full backtrace) IODDR0@0.0: ---[ end Kernel panic - not syncing: BUG! Signed-off-by: Pierre-Yves Kerbrat <pkerbrat@kalray.eu> Signed-off-by: Marius Gligor <mgligor@kalray.eu> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Reviewed-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| | * e1000e: Fix check_for_link return value with autoneg offBenjamin Poirier2018-03-052-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When autoneg is off, the .check_for_link callback functions clear the get_link_status flag and systematically return a "pseudo-error". This means that the link is not detected as up until the next execution of the e1000_watchdog_task() 2 seconds later. Fixes: 19110cfbb34d ("e1000e: Separate signaling for link check/link up") Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| | * e1000e: Avoid missed interrupts following ICR readBenjamin Poirier2018-03-052-8/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 82574 specification update errata 12 states that interrupts may be missed if ICR is read while INT_ASSERTED is not set. Avoid that problem by setting all bits related to events that can trigger the Other interrupt in IMS. The Other interrupt is raised for such events regardless of whether or not they are set in IMS. However, only when they are set is the INT_ASSERTED bit also set in ICR. By doing this, we ensure that INT_ASSERTED is always set when we read ICR in e1000_msix_other() and steer clear of the errata. This also ensures that ICR will automatically be cleared on read, therefore we no longer need to clear bits explicitly. Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| | * e1000e: Fix queue interrupt re-raising in Other interruptBenjamin Poirier2018-03-051-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Restores the ICS write for Rx/Tx queue interrupts which was present before commit 16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1) but was not restored in commit 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts", v4.15-rc1). This re-raises the queue interrupts in case the txq or rxq bits were set in ICR and the Other interrupt handler read and cleared ICR before the queue interrupt was raised. Fixes: 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts") Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| | * Partial revert "e1000e: Avoid receiver overrun interrupt bursts"Benjamin Poirier2018-03-051-14/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This partially reverts commit 4aea7a5c5e940c1723add439f4088844cd26196d. We keep the fix for the first part of the problem (1) described in the log of that commit, that is to read ICR in the other interrupt handler. We remove the fix for the second part of the problem (2), Other interrupt throttling. Bursts of "Other" interrupts may once again occur during rxo (receive overflow) traffic conditions. This is deemed acceptable in the interest of avoiding unforeseen fallout from changes that are not strictly necessary. As discussed, the e1000e driver should be in "maintenance mode". Link: https://www.spinics.net/lists/netdev/msg480675.html Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| | * e1000e: Remove Other from EIACBenjamin Poirier2018-03-051-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was reported that emulated e1000e devices in vmware esxi 6.5 Build 7526125 do not link up after commit 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts", v4.15-rc1). Some tracing shows that after e1000e_trigger_lsc() is called, ICR reads out as 0x0 in e1000_msix_other() on emulated e1000e devices. In comparison, on real e1000e 82574 hardware, icr=0x80000004 (_INT_ASSERTED | _LSC) in the same situation. Some experimentation showed that this flaw in vmware e1000e emulation can be worked around by not setting Other in EIAC. This is how it was before 16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1). Fixes: 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts") Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | fsl/fman: avoid sleeping in atomic context while adding an addressDenis Kirjanov2018-03-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | __dev_mc_add grabs an adress spinlock so use atomic context in kmalloc. / # ifconfig eth0 inet 192.168.0.111 [ 89.331622] BUG: sleeping function called from invalid context at mm/slab.h:420 [ 89.339002] in_atomic(): 1, irqs_disabled(): 0, pid: 1035, name: ifconfig [ 89.345799] 2 locks held by ifconfig/1035: [ 89.349908] #0: (rtnl_mutex){+.+.}, at: [<(ptrval)>] devinet_ioctl+0xc0/0x8a0 [ 89.357258] #1: (_xmit_ETHER){+...}, at: [<(ptrval)>] __dev_mc_add+0x28/0x80 [ 89.364520] CPU: 1 PID: 1035 Comm: ifconfig Not tainted 4.16.0-rc3-dirty #8 [ 89.371464] Call Trace: [ 89.373908] [e959db60] [c066f948] dump_stack+0xa4/0xfc (unreliable) [ 89.380177] [e959db80] [c00671d8] ___might_sleep+0x248/0x280 [ 89.385833] [e959dba0] [c01aec34] kmem_cache_alloc_trace+0x174/0x320 [ 89.392179] [e959dbd0] [c04ab920] dtsec_add_hash_mac_address+0x130/0x240 [ 89.398874] [e959dc00] [c04a9d74] set_multi+0x174/0x1b0 [ 89.404093] [e959dc30] [c04afb68] dpaa_set_rx_mode+0x68/0xe0 [ 89.409745] [e959dc40] [c057baf8] __dev_mc_add+0x58/0x80 [ 89.415052] [e959dc60] [c060fd64] igmp_group_added+0x164/0x190 [ 89.420878] [e959dca0] [c060ffa8] ip_mc_inc_group+0x218/0x460 [ 89.426617] [e959dce0] [c06120fc] ip_mc_up+0x3c/0x190 [ 89.431662] [e959dd10] [c0607270] inetdev_event+0x250/0x620 [ 89.437227] [e959dd50] [c005f190] notifier_call_chain+0x80/0xf0 [ 89.443138] [e959dd80] [c0573a74] __dev_notify_flags+0x54/0xf0 [ 89.448964] [e959dda0] [c05743f8] dev_change_flags+0x48/0x60 [ 89.454615] [e959ddc0] [c0606744] devinet_ioctl+0x544/0x8a0 [ 89.460180] [e959de10] [c060987c] inet_ioctl+0x9c/0x1f0 [ 89.465400] [e959de80] [c05479a8] sock_ioctl+0x168/0x460 [ 89.470708] [e959ded0] [c01cf3ec] do_vfs_ioctl+0xac/0x8c0 [ 89.476099] [e959df20] [c01cfc40] SyS_ioctl+0x40/0xc0 [ 89.481147] [e959df40] [c0011318] ret_from_syscall+0x0/0x3c [ 89.486715] --- interrupt: c01 at 0x1006943c [ 89.486715] LR = 0x100c45ec Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Acked-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ethernet: natsemi: correct spellingRandy Dunlap2018-03-063-5/+5
| |/ | | | | | | | | | | | | | | Correct spelling of National Semi-conductor (no hyphen) in drivers/net/ethernet/. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds2018-03-101-1/+1
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull rdma fixes from Doug Ledford: - Various driver bug fixes in mlx5, mlx4, bnxt_re and qedr, ranging from bugs under load to bad error case handling - There in one largish patch fixing the locking in bnxt_re to avoid a machine hard lock situation - A few core bugs on error paths - A patch to reduce stack usage in the new CQ API - One mlx5 regression introduced in this merge window - There were new syzkaller scripts written for the RDMA subsystem and we are fixing issues found by the bot - One of the commits (aa0de36a40f4 “RDMA/mlx5: Fix integer overflow while resizing CQ”) is missing part of the commit log message and one of the SOB lines. The original patch was from Leon Romanovsky, and a cut-n-paste separator in the commit message confused patchworks which then put the end of message separator in the wrong place in the downloaded patch, and I didn’t notice in time. The patch made it into the official branch, and the only way to fix it in-place was to rebase. Given the pain that a rebase causes, and the fact that the patch has relevant tags for stable and syzkaller, a revert of the munged patch and a reapplication of the original patch with the log message intact was done. * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (25 commits) RDMA/mlx5: Fix integer overflow while resizing CQ Revert "RDMA/mlx5: Fix integer overflow while resizing CQ" RDMA/ucma: Check that user doesn't overflow QP state RDMA/mlx5: Fix integer overflow while resizing CQ RDMA/ucma: Limit possible option size IB/core: Fix possible crash to access NULL netdev RDMA/bnxt_re: Avoid Hard lockup during error CQE processing RDMA/core: Reduce poll batch for direct cq polling IB/mlx5: Fix an error code in __mlx5_ib_modify_qp() IB/mlx5: When not in dual port RoCE mode, use provided port as native IB/mlx4: Include GID type when deleting GIDs from HW table under RoCE IB/mlx4: Fix corruption of RoCEv2 IPv4 GIDs RDMA/qedr: Fix iWARP write and send with immediate RDMA/qedr: Fix kernel panic when running fio over NFSoRDMA RDMA/qedr: Fix iWARP connect with port mapper RDMA/qedr: Fix ipv6 destination address resolution IB/core : Add null pointer check in addr_resolve RDMA/bnxt_re: Fix the ib_reg failure cleanup RDMA/bnxt_re: Fix incorrect DB offset calculation RDMA/bnxt_re: Unconditionly fence non wire memory operations ...
| * {net, IB}/mlx5: Raise fatal IB event when sys error occursDaniel Jurgens2018-02-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All other mlx5_events report the port number as 1 based, which is how FW reports it in the port event EQE. Reporting 0 for this event causes mlx5_ib to not raise a fatal event notification to registered clients due to a seemingly invalid port. All switch cases in mlx5_ib_event that go through the port check are supposed to set the port now, so just do it once at variable declaration. Fixes: 89d44f0a6c73("net/mlx5_core: Add pci error handlers to mlx5_core driver") Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
* | mlxsw: spectrum_switchdev: Check success of FDB add operationShalom Toledo2018-03-041-2/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Until now, we assumed that in case of error when adding FDB entries, the write operation will fail, but this is not the case. Instead, we need to check that the number of entries reported in the response is equal to the number of entries specified in the request. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Reported-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | spectrum: Reference count VLAN entriesIdo Schimmel2018-02-282-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One of the basic construct in the device is a port-VLAN pair, which can be bound to a FID or a RIF in order to direct packets to the bridge or the router, respectively. Since not all the netdevs are configured with a VLAN (e.g., sw1p1 vs. sw1p1.10), VID 1 is used to represent these and thus this VID can be used by both upper devices of mlxsw ports and by the driver itself. However, this VID is not reference counted and therefore might be freed prematurely, which can result in various WARNINGs. For example: $ ip link add name br0 type bridge vlan_filtering 1 $ teamd -t team0 -d -c '{"runner": {"name": "lacp"}}' $ ip link set dev team0 master br0 $ ip link set dev enp1s0np1 master team0 $ ip address add 192.0.2.1/24 dev enp1s0np1 The enslavement to team0 will fail because team0 already has an upper and thus vlan_vids_del_by_dev() will be executed as part of team's error path which will delete VID 1 from enp1s0np1 (added by br0 as PVID). The WARNING will be generated when the driver will realize it can't find VID 1 on the port and bind it to a RIF. Fix this by adding a reference count to the VLAN entries on the port, in a similar fashion to the reference counting used by the corresponding 'vlan_vid_info' structure in the 8021q driver. Fixes: c57529e1d5d8 ("mlxsw: spectrum: Replace vPorts with Port-VLAN") Reported-by: Tal Bar <talb@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Tested-by: Tal Bar <talb@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mlxsw: spectrum: Treat IPv6 unregistered multicast as broadcastIdo Schimmel2018-02-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When multicast snooping is enabled, the Linux bridge resorts to flooding unregistered multicast packets to all ports only in case it did not detect a querier in the network. The above condition is not reflected to underlying drivers, which is especially problematic in IPv6 environments, as multicast snooping is enabled by default and since neighbour solicitation packets might be treated as unregistered multicast packets in case there is no corresponding MDB entry. Until the Linux bridge reflects its querier state to underlying drivers, simply treat unregistered multicast packets as broadcast and allow them to reach their destination. Fixes: 9df552ef3e21 ("mlxsw: spectrum: Improve IPv6 unregistered multicast flooding") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: David Ahern <dsahern@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mlxsw: spectrum: Fix handling of resource_size_paramJiri Pirko2018-02-281-37/+38
| | | | | | | | | | | | | | | | | | | | | | | | Current code uses global variables, adjusts them and passes pointer down to devlink. With every other mlxsw_core instance, the previously passed pointer values are rewritten. Fix this by de-globalize the variables and also memcpy size_params during devlink resource registration. Also, introduce a convenient size_param_init helper. Fixes: ef3116e5403e ("mlxsw: spectrum: Register KVD resources with devlink") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mlxsw: core: Fix flex keys scratchpad offset conflictJiri Pirko2018-02-281-10/+10
| | | | | | | | | | | | | | | | | | | | IP_TTL, IP_ECN and IP_DSCP are using the same offset within the scratchpad as L4 ports. Fix this by shifting all up. Fixes: 5f57e0909136 ("mlxsw: acl: Add ip ttl acl element") Fixes: i80d0fe4710c ("mlxsw: acl: Add ip tos acl element") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | gianfar: Fix Rx byte accounting for ndev statsClaudiu Manoil2018-02-281-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Don't include in the Rx bytecount of the packet sent up the stack: the FCB (frame control block), and the padding bytes inserted by the controller into the frame payload, nor the FCS. All these are being pulled out of the skb by gfar_process_frame(). This issue is old, likely from the driver's beginnings, however it was amplified by recent: commit d903ec77118c ("gianfar: simplify FCS handling and fix memory leak") which basically added the FCS to the Rx bytecount, and so brought this to my attention. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sh_eth: uninline TSU register accessorsSergei Shtylyov2018-02-272-11/+11
| | | | | | | | | | | | | | | | | | | | | | We have uninlined the sh_eth_{read|write}() functions introduced in the commit 4a55530f38e ("net: sh_eth: modify the definitions of register"). Now remove *inline* from sh_eth_tsu_{read|write}() as well and move these functions from the header to the driver itself. This saves 684 more bytes of object code (ARM gcc 4.8.5)... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ixgbe: fix crash in build_skb Rx code pathEmil Tantilov2018-02-261-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add check for build_skb enabled ring in ixgbe_dma_sync_frag(). In that case &skb_shinfo(skb)->frags[0] may not always be set which can lead to a crash. Instead we derive the page offset from skb->data. Fixes: 42073d91a214 ("ixgbe: Have the CPU take ownership of the buffers sooner") CC: stable <stable@vger.kernel.org> Reported-by: Ambarish Soman <asoman@redhat.com> Suggested-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | gianfar: simplify FCS handling and fix memory leakAndy Spencer2018-02-231-16/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, buffer descriptors containing only the frame check sequence (FCS) were skipped and not added to the skb. However, the page reference count was still incremented, leading to a memory leak. Fixing this inside gfar_add_rx_frag() is difficult due to reserved memory handling and page reuse. Instead, move the FCS handling to gfar_process_frame() and trim off the FCS before passing the skb up the networking stack. Signed-off-by: Andy Spencer <aspencer@spacex.com> Signed-off-by: Jim Gruen <jgruen@spacex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: aquantia: Fix error handling in aq_pci_probe()Dan Carpenter2018-02-221-4/+10
| | | | | | | | | | | | | | | | | | We should check "self->aq_hw" for allocation failure, and also we should free it on the error paths. Fixes: 23ee07ad3c2f ("net: aquantia: Cleanup pci functions module") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ibmvnic: Fix early release of login bufferThomas Falcon2018-02-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | The login buffer is released before the driver can perform sanity checks between resources the driver requested and what firmware will provide. Don't release the login buffer until the sanity check is performed. Fixes: 34f0f4e3f488 ("ibmvnic: Fix login buffer memory leaks") Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/smc9194: Remove bogus CONFIG_MAC referenceFinn Thain2018-02-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | AFAIK the only version of smc9194.c with Mac support is the one in the linux-mac68k CVS repo, which never made it to the mainline. Despite that, from v2.3.45, arch/m68k/config.in listed CONFIG_SMC9194 under CONFIG_MAC. This mistake got carried over into Kconfig in v2.5.55. (See pre-git era "[PATCH] add m68k dependencies to net driver config".) Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* | amd-xgbe: Restore PCI interrupt enablement setting on resumeTom Lendacky2018-02-211-0/+2
| | | | | | | | | | | | | | | | After resuming from suspend, the PCI device support must re-enable the interrupt setting so that interrupts are actually delivered. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge tag 'mlx5-fixes-2018-02-20' of ↵David S. Miller2018-02-2110-33/+70
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2018-02-20 The following pull request includes some fixes for the mlx5 core and netdevice driver. Please pull and let me know if there's any issue. -stable 4.10.y: ('net/mlx5e: Fix loopback self test when GRO is off') -stable 4.12.y: ('net/mlx5e: Specify numa node when allocating drop rq') -stable 4.13.y: ('net/mlx5e: Verify inline header size do not exceed SKB linear size') -stable 4.15.y: ('net/mlx5e: Fix TCP checksum in LRO buffers') ('net/mlx5: Fix error handling when adding flow rules') ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net/mlx5: Fix error handling when adding flow rulesVlad Buslov2018-02-201-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If building match list or adding existing fg fails when node is locked, function returned without unlocking it. This happened if node version changed or adding existing fg returned with EAGAIN after jumping to search_again_locked label. Fixes: bd71b08ec2ee ("net/mlx5: Support multiple updates of steering rules in parallel") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * | net/mlx5: E-Switch, Fix drop counters use before creationEugenia Emantayev2018-02-201-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | First use of drop counters happens in esw_apply_vport_conf function, while they are allocated later in the flow. Fix that by moving esw_vport_create_drop_counters function to be called before the first use. Fixes: b8a0dbe3a90b ("net/mlx5e: E-switch, Add steering drop counters") Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * | net/mlx5: Add header re-write to the checks for conflicting actionsOr Gerlitz2018-02-201-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We can't allow only some of the rules sharing an FTE to ask for header re-write, add it to the conflicting action checks. Fixes: 0d235c3fabb7 ('net/mlx5: Add hash table to search FTEs in a flow-group') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * | net/mlx5: Use 128B cacheline size for 128B or larger cachelinesDaniel Jurgens2018-02-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The adapter uses the cache_line_128byte setting to set the bounds for end padding. On systems where the cacheline size is greater than 128B use 128B instead of the default of 64B. This results in fewer partial cacheline writes. There's a 50% chance it will pad to the end of a 256B cache line vs only 25% when using 64B. Fixes: f32f5bd2eb7e ("net/mlx5: Configure cache line size for start and end padding") Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * | net/mlx5e: Specify numa node when allocating drop rqGal Pressman2018-02-201-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When allocating a drop rq, no numa node is explicitly set which means allocations are done on node zero. This is not necessarily the nearest numa node to the HCA, and even worse, might even be a memoryless numa node. Choose the numa_node given to us by the pci device in order to properly allocate the coherent dma memory instead of assuming zero is valid. Fixes: 556dd1b9c313 ("net/mlx5e: Set drop RQ's necessary parameters only") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * | net/mlx5e: Return error if prio is specified when offloading eswitch vlan pushOr Gerlitz2018-02-201-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This isn't supported when we emulate eswitch vlan push action which is the current state of things. Fixes: 8b32580df1cb ('net/mlx5e: Add TC vlan action for SRIOV offloads') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * | net/mlx5: Address static checker warnings on non-constant initializersOr Gerlitz2018-02-201-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Address these sparse warnings on drivers/net/ethernet/mellanox/mlx5 [..]/core/diag/fs_tracepoint.c:99:53: warning: non-constant initializer for static object [..]/core/diag/fs_tracepoint.c:102:53: warning: non-constant initializer for static object etc Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * | net/mlx5e: Eliminate build warnings on no previous prototypeOr Gerlitz2018-02-202-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix these gcc warnings on drivers/net/ethernet/mellanox/mlx5: [..]/core/lib/clock.c:454:6: warning: no previous prototype for 'mlx5_init_clock' [-Wmissing-prototypes] [..]/core/lib/clock.c:510:6: warning: no previous prototype for 'mlx5_cleanup_clock' [-Wmissing-prototypes] [..]/core/en_main.c:3141:5: warning: no previous prototype for 'mlx5e_setup_tc' [-Wmissing-prototypes] Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * | net/mlx5e: Verify inline header size do not exceed SKB linear sizeEran Ben Elisha2018-02-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Driver tries to copy at least MLX5E_MIN_INLINE bytes into the control segment of the WQE. It assumes that the linear part contains at least MLX5E_MIN_INLINE bytes, which can be wrong. Cited commit verified that driver will not copy more bytes into the inline header part that the actual size of the packet. Re-factor this check to make sure we do not exceed the linear part as well. This fix is aligned with the current driver's assumption that the entire L2 will be present in the linear part of the SKB. Fixes: 6aace17e64f4 ("net/mlx5e: Fix inline header size for small packets") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * | net/mlx5e: Fix loopback self test when GRO is offInbar Karmy2018-02-201-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When GRO is off, the transport header pointer in sk_buff is initialized to network's header. To find the udp header, instead of using udp_hdr() which assumes skb_network_header was set, manually calculate the udp header offset. Fixes: 0952da791c97 ("net/mlx5e: Add support for loopback selftest") Signed-off-by: Inbar Karmy <inbark@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-14 11:17:18 +0000